Old Man Emu November 2008 Application Catalogue Number 23

Transcription

4 X 4 SHOCKS & SUSPENSION
NOVEMBER 2008
APPLICATION
CATALOGUE
NUMBER
23
CONTENTS
PAGE
GUIDE TO SELECTION ………………………….…………….………………………………………………
2
4x4 SHOCK ABSORBER & STEERING STABILISER APPLICATIONS ……..……………….……………
3
COMPACT AWD - OME SPRING & SHOCK ABSORBER RANGE ……………………………...…………
7
LTR REMOTE CANISTER SELECTION…...…...………………………………………………………….
8
COMPETITION SHOCK & SPRING SELECTION ……………………………...……………………………
9
SUSPENSION APPLICATIONS
CHRYSLER ……………………………...………………………………………………………………………
11
FORD ………………………………….…...………………………………………………………………………
17
HOLDEN / ISUZU / GM …………………………….….…………………………………………………………
20
HYUNDAI ………………………….………………...……………………………………………………………
24
KIA …………………………………………..………………………………………………………………………
24
LADA NIVA ……………………….………………………………………………………………………………
25
LAND ROVER ………..………………….………………...………………………………………………………
26
MAZDA ………………………………..….………………...………………………………………………………
30
MITSUBISHI ………………………..…….………………...……………………………………………………
31
NISSAN …………………………….…….………………...………………………………………………………
38
SSANGYONG ……………..…………….………………...………………………………………………………
50
SUZUKI ……………………………..…….………………...……………………………………………………
50
TOYOTA ………………………………….………………...………………………………………………………
55
TECHNICAL SPECIFICATIONS
ADDING OR REMOVING AN EXTRA LEAF ………...….……………………………………………………
74
REPLACEMENT MAIN OR 2ND LEAF ……………………………………..…………………………………
75
REPLACEMENT CENTRE BOLTS ……………………...……………………………………………………
76
U BOLTS ……………………….…………..……………...………………………………………………………
77
SUSPENSION FITTING KITS ………………………...………………………………………………………
78
LEAF SPRING TRIM PACKERS …………………….…….……………………………………………………
81
CLIP LINER KITS FOR LEAF SPRINGS …………..…………………………………………………………
81
INTER-LEAF LINER KIT FOR LEAF SPRINGS …………..…………………………………………………
81
LEAF SPRING CENTRE BOLT SLEEVES …..………………………………………………………………
81
DIAGRAM REFERENCE FOR SUSPENSION BUSH KITS ……….……..……..…………………………
82
SUSPENSION BUSH KIT SELECTION …..……....………………………….………………………………
84
SHOCK ABSORBER SPECIFICATIONS …..……..……………………………………………………………
92
SHOCK ABSORBER MOUNT TYPE ……………………………..……..……………………………………
96
LEAF SPRING SPECIFICATIONS ……………………………….....…..………………………………………
97
COIL SPRING SPECIFICATIONS …..…..…..………………….………….…………………………………
99
OLD MAN EMU POLYURETHANE SPRING BUSH DIMENSIONS ……..……..…………………………
103
NUMERICAL SPRING & SHOCK BUSH APPLICATIONS ………..…….……………………………………
104
STEERING STABILISER SPECIFICATIONS …..……..……….………………….…………………………
107
TORSION BAR FITTING HINTS ……..……..………………………..……………..…………………………
108
STRUT CARTRIDGE FITMENT INSTRUCTIONS………..……………..…………………………………...
110
RECOMMENDED FITTING TIMES …………….…...…..………..……………..……………………………
112
© ARB Corporation Limited, Old Man Emu Division P.O. Box 105 Kilsyth, Vic. 3137 Australia.
All rights reserved. No part of this catalogue may be reproduced or copied in any form or by any means (graphic, electronic or mechanical, including
photocopying, recording, taping or information systems) without the written permission of the publisher.
Page 1
GUIDE TO SELECTION
Terminologies & Explanations
Please note most suspension development has been carried out on Australian specification models.
Therefore, some differences may exist between the same model in another country. Overseas customers will
need to make allowances for these possible differences.
Supplying all items shown on suspension selection charts will ensure the system can be fitted, however, there will be vehicles which will not require all
items, eg. Trimming kits, caster kits, all U bolts shown, etc. Actual, individual vehicle requirements can only be determined when the suspension
system is fitted.
GVM - GROSS VEHICLE MASS: Set by the vehicle manufacturer and is determined by brake, axle, differential and tyre
specifications. Exceeding GVM ratings can have legal and safety implications and is not recommended.
LOAD RATING - FRONT: Weights shown are maximum permissible loads with regard to accessories fitted, eg. Bull
bar, winch, dual battery, etc.
LOAD RATING: The explanations below indicates the passenger and load weights that will provide optimum ride and
handling.
REAR:
LIGHT LOAD: Full passenger load with luggage weights up to 150kg.
MEDIUM LOAD: Full passenger load with luggage weight varying from 200kg to 350kg.
CONSTANT LOAD: The minimum constant load shown on selection chart is required for optimum spring performance.
Please note: These loads are approximate only. Refer to individual vehicle selection for load specifications.
LIFT HEIGHT: Is shown as a guide only and equates to the amount of lift over the vehicle's original ride height. This
amount can vary from vehicle to vehicle.
OE: Original Equipment, as supplied by the manufacturer of the vehicle.
SHOCK ABSORBERS: Where two part numbers are given for the same application the part with the asterisk (*)
indicates the shock absorber with the firmer ride.
SPRING BUSH: OME polyurethane spring eye bushes on installation must only be greased in the bore and on the
flange area and regularly thereafter with OME polyurethane grease.
STEERING STABILISER: Designed as a larger capacity replacement for the OE part and incorporates 50/50 neutral
valving.
CASTER KIT: The OMECA77B, CALR1 and CALR2 kits consist of 4 eccentric bushes which are pressed into the
leading arms of the vehicle. This will induce positive caster into the front geometry.
LEAF SPRINGS: A & B springs can be used to compensate for uneven vehicle weight distribution. Springs marked "A"
have a greater camber height than springs marked 'B'. 'A' type springs are generally fitted to the driver's side and 'B'
springs to the passenger side.
COIL SPRINGS: A & B springs are used to compensate for uneven vehicle weight distribution. 'A' type springs are
generally higher in free high than the 'B' spring. Individual coil specifications are listed in the back of this publication.
GEARBOX PACKER KIT: Designed to space down the gearbox cross member from the chassis to reduce tail shaft
flange angle thereby reducing driveline vibration.
GREASABLE SHACKLES: Replacement for original shackles allow easy regular greasing of polyurethane spring eye
bushes.
TRIM PACKERS: The prime purpose of a trim packer is to correct slight vehicle leaning.
VEHICLES WITH LEAF SPRINGS UNDER SLUNG: Trim packer when fitted will reduce suspension height.
VEHICLES WITH LEAF SPRINGS OVER SLUNG: Trim packer when fitted will increase suspension height.
VEHICLES WITH COIL SPRINGS: Polyurethane trim packer main purpose is to correct slight vehicle
trimming problems and will increase ride height when fitted.
Page 2
OME 4X4 SHOCK ABSORBERS & STEERING STABILISERS
SHOCK ABSORBER SELECTION ADVICE
Where there is a choice of Nitrocharger part numbers it is important the right selection is made with consideration given to
type of spring rates and customer applications.
Firm Valved Nitrocharger
The firm part number should be selected whenever heavy rate springs are fitted, as the valving has been specifically
developed to control the higher spring rates. The firmer valving will provide better control when cornering, while also
preventing axle bounce over rough roads.
If a softer valved Nitrocharger is fitted with a heavy rate spring the vehicle's rebound handling will be reduced. This will be
evident by axle bounce over rough roads, dipping under braking or cornering and wallowing over undulating roads.
Soft Valved Nitrochargers
Valved specifically for light to medium rate springs. Most suitable for customers wanting a comfortable ride and regularly
carry light to medium loads. Under full GVM load a slight amount of body roll during cornering and highway speed
manoeuvring can occur.
A CAUTION FOR CUSTOMERS BUYING 4 REPLACEMENT SHOCK ABSORBERS
By the time a customer has decided to replace the old and well used original shock absorbers there is every chance that
the original springs are also ready for replacement.
It should be explained to the customer that if their springs are sagged and tired that this would cause the shock absorbers
to work a lot harder.
Therefore, the life expectancy of the shock absorbers will be considerably shortened and when loaded ride and handling
qualities will also be reduced.
REMEMBER: A good set of shock absorbers will not overcome a bad set of springs.
OME SHOCKS, STRUTS
& CARTRIDGES
YEAR
VEHICLE DESCRIPTION
CHRYSLER JEEP
2002 on
2006 on
98 to 2005
92 to 98
84 on
To 86
74 to 86
To 86
2006 on
97 to 2006
86 to 96
Cherokee KJ ALL Models (OME Springs)
Grand Cherokee WH & WK
Grand Cherokee WJ & WG - Petrol Models
Grand Cherokee ZJ - 6 cylinder
Cherokee XJ - Petrol & Diesel
Cherokee Wagon & J10 Ute (Full Size)
Cherokee W10 & J20 Utes and Cab Chassis
CJ5, 6, 7, & 8
Wrangler JK - All Models
STEERING
STABILISERS
FRONT
REAR
*NS131/NS130
N188S
N132
N190
N117
*N40/N40C
*N36/N36C
N11113
*N39/N39C
*N35/N35C
12
OMESD40
12
OMESD40
1
1
N41
1
N41
1
*N41/N81
*N196/N211
*N66/N66C
N33
N56
N43
*N56/N54
*N198/N212
N67
N34
OMESD4012
12
OMESD40
Feroza II F310
Feroza I F300
Rocky F78 Wide Track
Rocky F70, F75, F80 & F85 Hard Top with Leaf Springs
Rocky F77 & 78 Tray Top with Leaf Springs
Scat Hard Top
*N18/N57G
*N18/N57G
N26F
OME027
OME027
N41/N81
*N49/N96
N43
N33
N43
*N48/N97
*N48/N97
OMESD31 '86 on
OMESD31 '86 on
2006 on
85 to 2005
To 01
2005 on
99 to 2004
87 to 93
All
Ranger PJ All Models
Courier/Ranger Pick Up
Explorer 4x4 Only
Ford F250 & F350
Ford F250 & F350
Raider Wagon
Maverick Wagon & Hard Top
N187
9
N51
N16
N195
N178
N51
*N21/N23F
All
81 to 89
81 to 89
81 to 89
70 to 80
70 to 79
Maverick Ute & Cab Chassis
Bronco (Single I Beam Front End)
Bronco (Dual I Beam Front End)
F100 4x4 & 4x2 (Single I Beam)
F100 4x4 & 4x2 (Twin I Beam)
F250 4x4 & 4x2 (Twin I Beam)
Wrangler TJ
Wrangler YJ
6
DAIHATSU
92 to 97
88 to 92
93 on
84 to 8/93
84 to 93
All
FORD
9
N189
*N53/N53C
N17
N179
N179+N18011
*N53/N53C
*N29/N22F
N25
N28
N52F
3
4
*N52F & N43
N52F
N52F
N52F
Page 3
N42
3
N42
3
N42
N55
N55
To 8/89 OMESD34
9/89 on OMESD36
OMESD22
STEERING
STABILISERS
OME SHOCKS, STRUTS
& CARTRIDGES
YEAR
VEHICLE DESCRIPTION
FRONT
REAR
N65
N150
*N65/N26F
N65
*N65/N26F
*N65/N26F
*N65/N26F
N26F
OME025
OME015
*N42/N89
*N42/N89
*N42/N89
*N15/N15C
N170
N162
*N172/N171
*N172/N171
N147S + N148S
N147S + N148S
N205
N149
*N107/N107C
*N115/N45F
*N108/N108C
*N44/N46
OMESD02
OMESD11
N17619
*N115/N45F
*N115/N45F
N78
N78
N17719
*N44/N46
*N44/N46
N69
N90
OMESD11
OMESD32
OMESD11
OMESD11
*N41/N811
*N41/N81
HOLDEN/ISUZU
2003 on
2003 on
7/81 to 2003
4/92 to 2003
11/86 to 3/92
82 to 10/86
99 to 6/2003
95 to 98
85 to 87
85 to 87
Rodeo/Isuzu Pick up -RA & RA7 Models/Colorado Diesel
Rodeo/Isuzu Pick up - RA Models/Colorado V6
Rodeo/Isuzu Pick Up KB4, KBD4 & TFS
Jackaroo/Trooper & Monterey (Isuzu Wagon)
Jackaroo/Trooper
Jackaroo/Trooper
Frontera Wagon
Frontera 2 Door UT
Drover QB (OE Springs)
Drover QB (OME Springs Fitted)
N8815
*N42/N89
N102
N15C
OME023
OME013
OMESD30
OMESD30
HYUNDAI
2001 on
2001 on
Terracan V6
Terracan Diesel
KIA
2006 on
Sorento All Models
02 to Late 06 Sorento All Models
LAND ROVER
99 to 04
91 to 99
94 to 2001
To 5/95
84 on
To 84
To 84
Discovery Series II (Coil Models only)
Discovery Series I
Range Rover MK II P38A Models
Range Rover (Except Air Bag Models)
Defender & County 90, 110 & 130
Land Rover Series I, II & III (80" & 109")
Land Rover Series II & III (88" SWB)
MAHINDRA
90 to 93
Bushranger & Stockman CJ340
MAZDA
2006 on
87 to 2005
9
Mazda BT50 All Models
B2600 Pick Up All Models
MITSUBISHI
4/00 on
Pajero/Montero NS, NM & NP (3.2 Diesel)
4/00 on
Pajero/Montero NS, NM & NP Wagon & Hard Top (V6)
91 to 3/00
91 to 3/00
89 to 5/91
To 4/91
00 on
98 to 00
2006 on
9/96 to 2005
91 to 8/96
91 to 8/96
86 to 8/96
To 86
To 9/86
Pajero/Montero (Coil Springs) NH, NJ, NK & NL
Pajero/Montero (Leaf Springs) NH, NJ, NK & NL
Pajero/Montero (Coil Springs) NF & NG
Pajero/Montero (Leaf Springs) NA, NB, NC, ND, NE, NF & NG
Challenger/Montero Sports (Coil Springs)
Challenger/Montero Sports (Leaf Springs)
Triton/L200 ML All Models
Triton/L200 MK All Models
Triton/L200 V6 (OE Springs)
Triton/L200 (V6) MH & MJ
Triton/L200 (4 Cylinder) ME, MF, MG, MH & MJ
L200 MA, MB, MC & MD
L300 Vans SA, SB, SC & SD
Page 4
1
N187
9
N51
N189
N53
*N203S/N129S
*N203S/N129S/
N109S
N18
N18
N60G
N60G
N57G
N57G
N186S
*N18/N57G
N60G
N60G
N60G
N60G
N60G
*N204/N152/N110
*N204/N152/N110
N64
*N56/N54
N62G
*N56/N54
N116
*N56/N54
*N59/N54
N30 or N30E16
N89
N30
*N89/N95
*N89/N95
N89
STEERING
STABILISERS
OME SHOCKS, STRUTS
& CARTRIDGES
YEAR
VEHICLE DESCRIPTION
FRONT
REAR
*N19/N19C
*N19/N19C
*N19/N19C
*N19/N19C
*N21/N23F
*N21/N23F
N28
N49
*N47/N96
N49
N183S
*N29/N29C
7
*N29/N29C
N25
7
OMESD01
OMESD11
*N29/N29C7
*N29/N22F
*N29/N22F
N25
*N48/N97
*N48/N97
N49
N184
N104
*N61/N61C
*N42/N89
N185
*N59/N56
*N59/N56
*N41/N81
N30
*N42/N89
OMESD11
OMESD34
OMESD36
OMESD22
OMESD22
OMESD22
OMESD22
NISSAN
2/00 on
97 to 1/00
97 on
97 on
To 8/89
9/89 on
88 to 7/97
8/83 to 88
80 to 7/83
67 to 79
2005 on
2/99 to 2005
96 to 1/99
86 to 8/95
2005 on
1/86 to 8/02
10/02 on
1/86 on
96 to 2005
80 to 85
Patrol Y61 (GU) Series II SWB & Wagon
Patrol Y61 (GU) Series I Wagon & SWB
Patrol Y61 (GU) Cab Chassis (Leaf Spring Rear)
Patrol Y61 (GU) Cab Chassis (All Coil Springs)
Patrol Y60 (GQ) Wagon & SWB
Patrol Y60 (GQ) Wagon, SWB & Cab Chassis
Patrol Y60 (GQ) Ute & Cab Chassis (Leaf Springs)
Patrol MQ Wagon, SWB, Ute & Cab Chassis
Patrol MQ Wagon, SWB, Ute & Cab Chassis
Patrol 60 & G60 Series
Pathfinder R51
Pathfinder R50
Pathfinder R50
Pathfinder/Terrano WD21
Navara D40
Navara D21 & D22 Pick Up
Navara D22
Navara D21 & D22 Pick Up 4x2
Terrano II 4x4 (European Models) (OE Springs)
720 Ute & Cab Chassis
N143S+N144S14
14
N143S+N144S
N26F
N183S
N585
5
N151
5
*N18/N57G
N26F
*N18/N57G5
OMESD35
17
OMESD35
SUZUKI
2001 on
95 to 2005
7/88 to 2005
7/88 to 2005
All
All
To 2004
82 to 95
88 to 96
78 to 12/81
78 to 12/81
78 to 12/81
74 to 12/81
XL7 Wagon V6
Grand Vitara 4 & 6 Cylinder
Vitara TA01 & TD01 & Wagon
Vitara TA012 TD01 SWB
Jimny SN413 (OE Springs)
Jimny SN413 (OME Springs)
Santana Samurai All Models
Sierra SJ410 & SJ413 Ute MG410 / WT1000cc (OME Springs)
Sierra SJ70, SJ71, SJ413, MG410 / WT1300cc (OME Springs)
LJ80 & LJ80V SWB (OME Springs)
LJ80 & LJ80V SWB (OE Springs)
LJ80 Ute (OME Springs)
540, LJ10, LJ20 & LJ50 (OME Springs)
N153
N105
N105
N32
N173S
N103S
N103S
N103S
OME028
OME028
OME034
OME015
OME025
OME015
OME025
OME015
OME015
OME030
OME029
OME035
OME013
OME013
N43
N/A
OME013
OME013
N65
N118
20
OMESD3018
18
OMESD30
18
OMESD30
18
OMESD30
18
OMESD30
OMESD30
SSANGYONG
To 2005
Musso, Sport Utility & Korando Models
TOYOTA
2007 on
3/98 on
3/98 on
4/90 to 98
LandCruiser 200 Series V8
LandCruiser 100 Series (IFS)
LandCruiser 100 & 105 Series (Front Live Axle)
LandCruiser 80 Series
4/2003 on
Prado 120 Series (Except TEMS/Grande Models)
7/96 to 10/02
2007 on
2007 on
99 to 2006
85 to 99
All
84 to 90
85 on
All
86 to 3/90
80 to 86
80 to 86
86 to 3/90
Prado 95 & KZJ90 Series
LandCruiser 78 & 79 Series V8 Diesel Model
LandCruiser 76 Series Wagon - V8
LandCruiser 78 & 79 Series - 6 cylinder models
LandCruiser II LJ/RJ70, LJ/KZJ71 & LJ/KZJ78 Models
LandCruiser Bundera, SWB, LJ70 & RJ70 Series
LandCruiser 70,73 & 74 Series
LandCruiser HZJ71 & HJZ74 Series
LandCruiser 60,61 & 62 Series (Rear Lower Pin 19mm)
LandCruiser 60 Series (Rear Lower Pin 16mm)
LandCruiser 60 Series (OE Springs)
LandCruiser 60 Series (OE Springs)
Page 5
10
*N210/N209
N208S
*N199/N133/N100 *N200/N101/N101C2
*N73/N70
*N74E/N71E2
*N73/N70
*N74E/N71E2
*N201S/N140S/
*N202/N142/N141
N139S
*N86/N86C
*N91S/N91SC
*N197/N75E
*N181/N106
*N197/N75E
*N181/N106
N106
*N75F/N75E2
*N50/N88
*N75F/N75E2
N79
N77
N112&N113
N114
*N85/N94
*N50/N88/N92
N68
*N106/N106C
*N90/N85/N94
*N50/N88/N92
*N42/N89/N95
*N50/N88/N92
N42
N50
N90
N50
OMESD24
OMESD24
OMESD47
OMESD47
OMESD24
OMESD24
OMESD24
OMESD24
OMESD24
OMESD24
OMESD24
OMESD24
OMESD24
OME SHOCKS, STRUTS
& CARTRIDGES
YEAR
VEHICLE DESCRIPTION
TOYOTA (continued)
LandCruiser FJ55
To 11/80
LandCruiser 45 & 47 Series
To 12/84
To 12/84
LandCruiser BJ, FJ & HJ 40 & 42 Series All Models
To 12/84
LandCruiser BJ, FJ & HJ 40 & 42 Series All Models (OE Springs)
Fortuner
2005 on
FJ Cruiser
2006 on
HiLux Vigo KUN26R, GGN25R
2005 on
HiLux Tiger LN172, LN167, KZN 165, RZN174 &
9/97 to 04
RZN169 (IFS)
9/83 to 8/97 HiLux LN65, YN65, LN106 & RN105 (All Leaf Suspension)
9/83 to 8/97 HiLux LN65, YN65, LN106 & RN105 (OE Springs)
HiLux/4 Runner LN107, RN105, RN110 & LN111 (IFS)
88 to 8/97
HiLux/4 Runner LN107, RN105, RN110 & LN111(IFS)(OE Springs)
88 to 8/97
HiLux LN46 & RN46 (All Leaf) (Rear Lower Pin 16mm)
To 8/83
HiLux LN46 & RN46 (All Leaf) (Rear Lower Pin 16mm)(OE Springs)
To 8/83
HiLux 4x2 Models
84 to 97
4 Runner (USA)
2003 on
4 Runner Front & Rear Coil Springs (USA)
96 to 2002
4 Runner (IFS) Front Torsion Bar/Rear Coil Springs
90 to 1996
4 Runner (IFS) Rear Leaf Springs (OE Springs)
86 to 1990
4 Runner (IFS) Rear Leaf Springs
86 to 1990
4 Runner (Front Live Axle) (OE Springs)
84 to 1986
4 Runner (Front Live Axle)
84 to 1986
Blizzard
82 to 83
Kijang (4th Gen.)
97 to 2003
10/2004 on Tacoma V6
Tacoma V6
To 2004
Tundra
2007 on
FRONT
N43
*N41/N81
*N41/N81
N41
*N167S/N166S
N140S
*N167S/N166S
*N87/N80
*N93/N84
N84
N98
N98
*N93/N84
N84
N83
N140S
N91S/N91SC
N98
N98
N98
N84
N93/N84
*N41/N81
N128
N140S
*N91S/N91SC
N192S
REAR
N42
*N42/N89
*N89/N95
N42
N191
N141
*N169/N168
*N75&N75E/
N68&N68E8
*N85/N94
*N90/N85
*N85/N94
*N90/N85
*N89/N952
*N42/N89
N54
N142
N86/N86C
N72F
N85/N94
N85/N94
N90/N85
N85/N94
N48
N56
N182
N85
N193
VOLKSWAGON
85 to 90
Syncro 4x4
N38S
N37
NOTES: *first part number has firmer valving.
1. 1983 and on wide track CJ Jeeps require bush kit OMEB27 for the front lower mount and all Cherokee wagons and Mahindra lower
front and rear mounts.
2. Shock lower body stone guards are recommended fitment to rear shocks to protect against severe stone peppering encountered
on loose road surfaces. OME661 (suit LandCruiser 80 & 100 Series only) OME660 (all other models).
3. 1981 on F100 and Bronco require bush kit OMEB27 on bottom rear mount.
4. Ford dual shocks. N43 fitted in front of N52F.
5. It may be necessary to slightly increase the clearance in the front wishbone to allow the shock absorber to fit. Do not modify the shock absorber.
6. FK16 20mm bump stop spacer kit mandatory fitment.
7. FK18 rear sway bar extension bracket for LWB models and FK24 for SWB models are mandatory fitment with Nitrochargers to prevent damage
to sway bar due to increased wheel droop.
8. N75E and N68E are 20mm longer and must only be installed to right hand side.
9. FK22 support brackets must be installed to upper shock mounting brackets on late 1996 on models manufactured in Thailand.
10. N208S can only be installed with OME Coil Springs.
11. N179 suits models with single rear shock set up. Models with twin rear shocks require N179 fitment rear of axle, N180 front of axle, also fitment
of OME660 stone shields are recommended on the N180.
12. OMESD40 will only fit left hand drive models.
13. To obtain maximum ride quality improvement it is recommended that an OME replacement stabiliser bar (OMESTAB1) be fitted.
14. Models with ABS will require an SMP638 ABS bracket kit.
15. OMEB11 bush kit is required to convert lower 19mm bush to 16mm ID.
16. To prevent possible rear spring inversion the OE shock absorber length must be matched to the closest open length to either N30 or N30E.
17. OMESD35 will suit D21 models only.
18. Only suitable for models equipped with original steering damper.
19. Shocks are the same length as OE.
20. OME030 is shorter than OME029 and must be used with OE coils to ensure coils remain entrapped.
Note: Replacement dust boot part numbers: Nitrocharger OME412422
Page 6
STEERING
STABILISERS
OMESD23
OMESD23
OMESD23
OMESD33
OMESD21
OMESD21
OMESD33
OMESD21
OMESD21
OMESD33
OMESD33
OMESD33
OMESD21
OMESD21
COMPACT AWD - OME SPRING & SHOCK ABSORBER
LIFT
F/R
(mm)
FRONT
Terios J100 J102
20/20
OME531
OME532
Escape BA ZA AB
Front-Cartridge, Rear - Nitrocharger
Territory SX SY AWD (4WD)
30/30
OME904
20/30
NC1451
OME533
OME905
N146
OME534
Captiva, Antara - V6 (3.2) & Diesel
20/30
OME529
OME530
CRV
CRV MY 2002 MY 2005
CRV RD
OME Struts to Suit OME Springs
20/20
OME535
-/20 CANNOT LIFT
30/30
OME797
N126S
OME536
OME538
OME798
N127S
Santa Fe CM V6 (2.7) & Diesel
Santa Fe
OME Front - Cartridge, Rear - OME Gas
20/30
10/20
NC1601
OME528
OME908
OME033
Sportage V6 & Diesel
Sportage JA MY02 MY03 - V6
20/20
20/30
OME525
OME523
OME526
OME524
Freelander V6 & 2Ltr Diesel DOHC - Wagon
Freelander 4 Cylinder Petrol Wagon
OME Cartridge to Suit OME Springs
Freelander V6 & 2Ltr Diesel DOHC
10/20
10/20
OME502
OME504
OME503
OME505
10/20
NC1371
OME500
NC1381
OME501
NC1371
NC1381
RX-330 4WD MCU38R MY05 - V6
20/30
OME509
OME510
Tribute YU MY03 MY04
Front - Cartridge, Rear - Nitrocharger
30/30
OME904
NC1451
OME905
N146
X-Trail Petrol
X-Trail Diesel
X-Trail: Front - Petrol - OME506, Diesel - OME507
25/25
25/25
20/30
OME511
OME513
OME506 / 507
OME512
OME512
OME508
NC1611
NC1631
Forester MY03 MY04 MY05
Outback 4th Gen MY04 MY05 MY06 4Cyl
Outback 4th Gen MY04 MY05 MY06 6Cyl
20/20
20/20
20/20
OME519
OME516
OME517
OME520
OME518
OME518
Kluger MCU20R - V6
Rav 4 LWB ACA33R
Rav 4 SWB & LWB ACA20R ACA21R - Diesel
Rav 4 SWB & LWB ACA20R ACA21R - Petrol
OME Struts / Gas Shocks to Suit OME Springs
Rav 4 LWB SXA11R MY98 MY99 - Petrol
Rav 4 SWB SXA11R MY98 MY99 - Petrol
20/20
30/30
40/40
40/40
YEAR
DAIHATSU
97 to 2006
UNIT
PRICE
REAR
FORD
To 06/2006
2004 to 10/07
GM / OPEL
2006 on
HONDA
01/2007 on
12/01 to 01/07
10/97 to 11/01
HYUNDAI
05/2006 on
2000 to 2005
OME527
OME907
KIA
2005 on
1997 to 2003
LAND ROVER
11/00 to 1/04
To 10/2000
To 10/2000
LEXUS
2003 on
MAZDA
To 06/2006
NISSAN
2007 on
2001 to 10/06
SUBARU
7/2002 on
9/2003 on
9/2003 on
TOYOTA
03/2006 on
01/2006 on
07/00 to 08/05
07/00 to 08/05
To 2000
To 2000
NOTES:
1.
Refer to pages 110 - 111 for fitting instructions.
Page 7
OME509
OME539
OME799
OME793
N119S+N123S
25/25
OME793
N206S+N207S
25/25
OME793
N206S+N207S
OME510
OME540
OME795
OME795
OME031
OME794
OME031
OME796
OME031
UNIT
PRICE
4X4 LTR REMOTE CANISTERS
LTR SHOCKS
YEAR
VEHICLE DESCRIPTION
FRONT
LAND ROVER
Discovery Series I
91 to 99
Defender & County 90, 110 & 130
84 on
LTR04F R&L
LTR05F
REAR
LTR04R
LTR05R R&L4
NISSAN
2/00 on
97 to 1/00
97 on
To 8/89
9/89 on
Patrol Y61 (GU) Series II SWB & Wagon
Patrol Y61 (GU) Series I Wagon & SWB
Patrol Y61 (GU) Cab Chassis (All Coil Springs)
Patrol Y60 (GQ) Wagon & SWB
Patrol Y60 (GQ) Wagon, SWB & Cab Chassis
LTR07F
LTR07F
LTR07F
LTR02F
LTR02F
LandCruiser 100 Series (IFS)
LandCruiser 105 Series (Front Live Axle)
LandCruiser 78 & 79 Series (6 cylinder models only)
HiLux LN172, LN167, KZN165, RZN174 &
RZN169 (IFS)
LTR06F
LTR01F
LTR01F
LTR09F
LTR08FL/FR
LTR07R1
LTR07R1
LTR07R1
LTR02R
LTR02R
TOYOTA
3/98 on
3/98 on
4/90 to 98
99 to 2006
9/97 to 04
LTR06R R&L2
LTR03R R&L2
LTR01R R&L2
LTR09R R&L
LTR08RL/RR3
NOTES:
1. FK18 rear sway bar extension bracket for all models without detachable sway bar and FK24 for all models with detachable
sway bar are mandatory fitment with Nitrochargers to prevent damage to sway bar due to increased wheel droop.
2. Fitment of a rear stone flap kit is mandatory to the control arms to prevent stone damage to the shock absorber.
OME662 suits models with 34mm diameter. OME664 suits models with 43mm diameter.
3. Fitment of OME663 stone flap kit is mandatory to prevent damage to piston rod from stone peppering.
4. LTR05R suits early model defenders where the fuel pump is not mounted inside of the right rear mud guard.
Note: Replacement dust boot part numbers: Nitrocharger OME512422
GASSING REMOTE CANISTER SHOCK ABSORBERS
The only recommended gas to use in LTR shock absorbers is Nitrogen. A Schrader valve,
part number 2755, from Schrader Automotive Inc is required to guarantee correct pressure
is reached. When using a Schrader valve to gas your LTR Shock absorber first set the
pressure gauge to the required pressure. Attach the Schrader valve to the air fitting at the end
of the remote canister. Gas the canister until the shock absorber shaft is fully extended,
hold gas pressure for 30 seconds, release Schrader valve and remove.
Note: This can be done for you by your Old Man Emu Stockist.
Important: Gassing of your LTR shock absorber should be carried out before fitment to the
vehicle. If LTRs are already fitted the vehicle's suspension should be at full extension before
gassing.
MINIMUM/MAXIMUM GAS PRESSURE
On Road/Off Road
40-80psi (2.8 - 5.5 BAR)
Competition
80-100psi (5.5 - 6.9 BAR)
An increase in gas pressure firms up ride quality but will not alter ride height
MAINTENANCE
The following checks need to be carried out as part of regular vehicle maintenance.
To ensure maximum cooling of your LTR shock absorber inspect the shock absorber
body and canister for any mud and debris build up and clean if necessary
Check that the polyurethane boot is securely fastened in place and that it is not damaged.
If the boot is found to be detached thoroughly clean the shock absorber shaft and inside
the boot before reattaching it.
Ensure all polyurethane bushes, locating washers and nuts are in good condition and
securely fastened.
To ensure maximum shock absorber performance check gas pressure every 20,000km
Page 8
4X4 COMPETITION SHOCK & SPRING SELECTION
WARNING
WARRANTY EXCLUSION DISCLAIMER
Due to the unusual component design requirements and the severe nature of competition usage,
the normal Old Man Emu product warranty conditions do not apply to any products listed on this page.
NISSAN PATROL Y60 & Y61 MODELS
COMPETITION SHOCKS AND COIL SPRINGS
Lift
Location
Coil Rate
Coil Length (mm)
A
B
460
445
510
495
75mm
FRONT
REAR
Coil Spring
Part No.
OME412
OME415
100mm
FRONT
REAR
OME413
OME416
250 LBS
290 LBS
485
535
470
520
N19L
N29L
125mm
FRONT
REAR
OME414
OME417
250 LBS
290 LBS
510
560
495
545
N19L
N29L
250 LBS
290 LBS
Shock
Part No.
N19L
N29L
TOYOTA LANDCRUISER 80 & 100 SERIES MODELS
COMPETITION SHOCKS AND COIL SPRINGS
Lift
Location
75mm
FRONT
REAR
Coil Spring
Part No.
OME418
OME421
Coil Rate
100mm
FRONT
REAR
OME419
OME422
300 LBS
280 LBS
530
505
540
515
N73L
N74L
125mm
FRONT
REAR
OME420
OME423
300 LBS
280 LBS
555
530
565
540
N73L
N74L
300 LBS
280 LBS
Coil Length (mm)
A
B
505
515
480
490
Shock
Part No.
N73L
N74L
IMPORTANT:
The products listed in this selection chart are deemed by Old Man Emu to be suitable
only for Off Road use and their legality for public road use should be certified by
the relevant Registration Authority.
Modifications and replacement of other associated components will be required.
Lift increase is approximate and based on standard vehicle weights.
Page 9
4X4 COMPETITION SHOCK & SPRING SELECTION
WARNING
WARRANTY EXCLUSION DISCLAIMER
Due to the unusual component design requirements and the severe nature of competition usage,
the normal Old Man Emu product warranty conditions do not apply to any products listed on this page.
Nitrocharger L Series
Vehicle
Jeep JK
Jeep XJ
Jeep YJ
Jeep TJ
Jeep ZJ
Patrol Y60, Y61
LandCruiser 80, 100
Front
Open
Closed
Rear
Open
Closed
N196L
N35L
N33L
N66L
N39L
N19L
N73L
693
678
748
678
678
555
667
404
392
422
392
392
322
381
N198L
N36L
N34L
N67L
N40L
N29L
N74L
706
622
622
622
655
716
673
422
366
366
366
389
426
387
Selection for individual vehicles depends on:
1. Open and closed length requirements
2. Vehicle front and rear weight distribution
The table below lists suggested selection for various competition vehicle types.
Vehicle Type
Buggies
Front
OME007: 1per side
Baja
OME007: 1 per side
4WD
- Large
- Small
N76: 4 per side
N76: 3 per side
Rear
OME007: 1 per side
= Multiple fitment required
*OME018: 2 per side
OME007: 2 per side
OME018: 2 per side
N76: 2 per side
N76: 2 per side
*HANDLING VARIATION CAN BE CHANGED BY REMOVING ONE SHOCK
Shock Characteristics & Specifications
Part No
OME007
OME018
N76
Top Mount Lower Mount
Large Eye
Large Eye
Large Eye
Large Eye
Large Eye
Large Eye
Open Length
600mm
585mm
680mm
Closed Length
359mm
359mm
408mm
*Characteristic
Compression
Rebound
Rebound
*INDICATES THE PROMINENT VALVING FIRMNESS
Warranty Implications
The fitter selling these shocks must inform the customer there is no warranty due to the severe nature of
competition racing. The fitter must also note on the customer's receipt "racing application no warranty
applies". This will prevent any future misunderstanding.
Page 10
CHRYSLER
JEEP GRAND CHEROKEE WH / WK
FRONT
Estimated Lift: 50mm
SPRING: TO 40 KGS
STRUT
SPRING: 41 TO 100 KGS
STRUT
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SPRING: HEAVY LOAD
SHOCK ABSORBER
V8 PETROL & DIESEL
PART NUMBER
QTY
OME990
N188S
2
OME991
N188S
2
UNIT
PRICE $
2
2
ALL MODELS
PART NUMBER
QTY
OME992
N190
2
OME993
N190
2
UNIT
PRICE $
2
2
JEEP GRAND CHEROKEE WJ & WG
FRONT
SPRING: TO 40 KGS
SHOCK ABSORBER
SHOCK ABSORBER
TRIM PACKER
STABILISER BAR
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SPRING: HEAVY LOAD
SHOCK ABSORBER
TRIM PACKER
V6 & V8 PETROL ENGINES
PART NUMBER
QTY
OME935
N111
2
OME936
N111
2
OMEWJPF10
OMESTAB1
UNIT
PRICE $
2
1
DIESEL ENGINES
PART NUMBER
QTY
OME936
N111
2
2
OME936
N111
1
OMEWJPF10
OMESTAB1
2
2
2
2
2
1
1
ALL MODELS
PART NUMBER
QTY
OME944
N117
2
OME945
N117
2
UNIT
PRICE $
2
2
OMEWTJPR10
REMARKS:
1
OMESTAB1 is a lighter rate OME replacement stabiliser bar which is a recommended fitment so maximum ride
quality improvement can be obtained. (OMESTAB1 does not suit Diesel Models).
2
Add 1 only OMEWJPF10 Trim Packer to increase ride height for vehicles with Bull Bar and Winch.
Page 11
UNIT
PRICE $
CHRYSLER
JEEP GRAND CHEROKEE ZJ
FRONT
Estimated Lift: 20 - 25mm
SPRING: TO 40 KGS
SHOCK ABSORBER
SHOCK ABSORBER
STEERING DAMPER
COIL PACKER
6 CYLINDER & V8 ENGINES
PART NUMBER
OME931
OME934
*N39 / N39C
OME930
OME934
N39
OMESD40
OMEJGF10
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SPRING: CONSTANT 100 KGS
SHOCK ABSORBER
COIL PACKER
QTY
1
UNIT
PRICE $ REMARKS:
2
1
OME931 and OME930 suit 6 cylinder
models. OME934 suits V8 models.
2
OMESD40 will only fit left hand drive
models.
2
1
2
2
2
1
ALL MODELS
PART NUMBER
QTY
OME940
*N40 / 40C
2
OME943
N40
2
UNIT
PRICE $
2
2
OMEJGR10
JEEP CHEROKEE XJ WAGON 1984 ON
FRONT
SPRING: TO 50 KGS: 45mm
SHOCK ABSORBER
SPRING: 51 TO 90 KG: 35mm
PETROL & DIESEL ENGINES
PART NUMBER
OME930
*N35 / N35C
SHOCK ABSORBER
OME930
N35
STEERING DAMPER
OMESD40
REAR
SPRING: LIGHT LOAD
SHOCK ABSORBER
SPRING: MEDIUM LOAD
2
2
3
2
2
5
PART NUMBER
CS034RA / B
*N36 / N36C
SHOCK ABSORBER
SPRING BUSH KIT
OE
GEARBOX PACKER KIT
3
UNIT
PRICE $
XJ Models fitted with a 3 bolt engine
exhaust pipe flange, can experience a
clearance problem with the tail shaft,
when suspension is under full deflection.
Fitment of an adjustable front panhard rod
or a change to the smaller 2 bolt flange
will provide the required clearance.
1
ALL MODELS
CS035RA / B
N36
U BOLTS
QTY
Warning:
OMEU60
OMEU57
XJGK01
QTY
2
1+1
2
1+1
UNIT
PRICE $
2
2
1
4
4
1
REMARKS:
1
OMEU60 suits Dana 35 type differential - Australian models. OMEU57 suits AMC 8 1/4 type differential.
2
Trimming requirement greater than 10mm use A/A fitment. Where near level rake is desired B/B fitment should
be used. D22XL extra leaf can be fitted to CS034RA/B and CS035RA/B for heavier constant load carrying ability.
NB: Models fitted with OE Up Country Suspension pack will only be raised by 20mm.
3
OMEJGF10 front coil packer can be used for trimming or extra lift purposes.
4
Fit XJGK01 gearbox packer kit should a driveline vibration occur.
5
OMESD40 will only fit left hand drive models.
Page 12
CHRYSLER
JEEP CHEROKEE/LIBERTY KJ
FRONT
SPRING: NO ACCESSORIES
STRUT
SPRING: TO 50 KGS
STRUT
STRUT
REAR
SPRING: LIGHT LOAD
SHOCK ABSORBER
SPRING: MEDIUM LOAD
SHOCK ABSORBER
PETROL ENGINES
PART NUMBER
OME925
NS130
OME926
NS131
OME790
NS131
QTY
1
UNIT
PRICE $
OME927
NS131
2
2
1
PART NUMBER
OME926
NS130
2
2
1
DIESEL ENGINES
OME790
NS131
2
2
QTY
1
UNIT
PRICE $
2
2
1
2
2
1
2
2
ALL MODELS
PART NUMBER
QTY
OME947
N132
2
OME948
N132
2
UNIT
PRICE $
2
2
REMARKS:
1
Due to varying OE ride heights, some KJ models may only achieve a 20mm lift.
JEEP WRANGLER JK 2 DOOR 2006 ON
FRONT
Estimated Lift: 50 mm
SPRING: TO 40 KGS
V6 PETROL ENGINE
PART NUMBER
OME615
SHOCK ABSORBER
OME616
*N196 / N211
TRIM PACKER
OMEJKPF10
REAR
SPRING: MEDIUM LOAD
QTY
UNIT
PRICE $
2
OME616
1
2
OME619
*N196 / N211
2
OMEJKPF10
PART NUMBER
SHOCK ABSORBER
OME618
*N198 / N212
TRIM PACKER
OMEJKPR10
QTY
1
2
1
2
UNIT
PRICE $
2
REMARKS:
1
PART NUMBER
1
ALL MODELS
OME617
2.8 DIESEL ENGINE
For ride height and trim adjustment use - Front: OMEJKPF10 Rear: OMEJKPR10
Do not fit more than 1 packer per coil spring.
Page 13
QTY
1
2
1
2
2
UNIT
PRICE $
CHRYSLER
JEEP WRANGLER JK UNLIMITED 2006 ON
FRONT
SPRING: TO 40 KGS
V6 PETROL ENGINE
PART NUMBER
OME616
SHOCK ABSORBER
OME619
*N196 / N211
TRIM PACKER
OMEJKPF10
REAR
QTY
2
OME619
1
2
OME621
*N196 / N211
2
PART NUMBER
QTY
1
2
OME618
1
2
SPRING: CONSTANT 300KGS
OME620
*N198 / N212
1
2
PANHARD ROD EXTENSION BKT KIT RIGHT HAND DRIVE
TRIM PACKER
1
2
1
2
2
ALL MODELS
OME617
LEFT HAND DRIVE
QTY
OMEJKPF10
SPRING: SOFT TOP
PANHARD ROD EXTENSION BKT KIT -
PART NUMBER
1
SPRING: HARD TOP 150KGS
SHOCK ABSORBER
UNIT
PRICE $
2.8 DIESEL ENGINE
UNIT
PRICE $
2
FK37
2
1
FK39
2
1
OMEJKPR10
REMARKS:
1
For ride height and trim adjustment use - Front: OMEJKPF10 Rear: OMEJKPR10
Do not fit more than 1 packer per coil spring.
2
Fitment of Panhard rod extension bracket kit is not mandatory, but fitment will improve the ride feel by locating the
panhard rod to its original position.
Page 14
UNIT
PRICE $
CHRYSLER
JEEP WRANGLER TJ & TJ UNLIMITED
FRONT
SPRING: TO 40 KGS
SHOCK ABSORBER
SHOCK ABSORBER
TRIM PACKER
STEERING DAMPER
6 CYLINDER ENGINE
PART NUMBER
OME932
*N66 / N66C
OME933
N66
OMEJGF10
OMESD40
REAR
SPRING: SOFT TOP
SHOCK ABSORBER
SPRING: HARD TOP
SHOCK ABSORBER
SHOCK ABSORBER
PANHARD ROD BRACKET KIT
TRIM PACKER
UNIT
PRICE $
2
1
2
2
1
2
1
5
2 DOOR
PART NUMBER
OME941
N67
OME941
N67
OME942
N67
FKWTJ01
FKWTJ02
UNLIMITED
QTY
1
UNIT
PRICE $
PART NUMBER
QTY
OME949
N67
2
OME949
N67
2
2
2
1
2
2
1
2
2
2
1
OMEWTJPR10
GEARBOX PACKER KIT
BUMPER STOP SPACER KIT
QTY
FK16
2
2
FKWTJ01
FKWTJ02
2
1
3
1
4
1
OMEWTJPR10
3
1
4
1
FK16
REMARKS:
1
For ride height and trim adjustment use - Front: OMEJGF10
2
FKWTJ01 panhard rod extension bracket kit fitment to right hand drive or FKWTJ02 to left hand drive models is
mandatory to ensure correct rear axle tracking.
3
A Gear box packer kit is mandatory fitment to prevent driveline vibration.
JWGK01 suits all models to 2003.
JWGK02 suits manual models from 2003.
JWGK03 suits auto models from 2003.
4
FK16: Mandatory fitment 20mm bump stop spacer kit to prevent coil springs becoming solid on full compression.
5
OMESD40 only suitable for fitment to left hand drive models.
Page 15
Rear: OMEWTJPR10
UNIT
PRICE $
CHRYSLER
JEEP WRANGLER YJ 1986 - 1996
FRONT
SHOCK ABSORBER
SHOCK ABSORBER
SPRING BUSH KIT
GEAR BOX PACKER KIT
GREASABLE SHACKLE KIT
STEERING DAMPER
PETROL ENGINES
PART NUMBER
QTY
CS014F
N33
2
CS014F
N33
2
OMESB57
2
2
JWGK01
1
1
OMEGS11
OMESD40
3
REAR
2
2
OMESB87
UNIT
PRICE $
1
1
ALL MODELS
PART NUMBER
QTY
CS036R
N34
2
CS037R
N34
2
UNIT
PRICE $
SPRING: HARD TOP
MEDIUM LOAD TO 200 KGS
SHOCK ABSORBER
2
SPRING: SOFT TOP
LIGHT LOAD
SHOCK ABSORBER
SPRING BUSH KIT
OMESB57
OMESB87
OMEGS11
2
2
2
1
REMARKS:
1
JWGK01 fitment reduces driveline vibration.
2
Use OMESB57 with original shackles. OMESB87 with OMEGS11 greasable shackles.
3
OMESD40 will only fit left hand drive models.
Page 16
FORD
RANGER PJ 12/2006 ON ALL MODELS
FRONT
PART NUMBER
TORSION BARS: OVER 60 KGS
SHOCK ABSORBER
FITTING KIT
REAR
QTY
303013
*N194 / N187
1
2
FK22
1
1
1
ALL MODELS
PART NUMBER
QTY
CS056R
N189
2
2
SHOCK ABSORBER
CS049R
N189
OMEGS18
1
U BOLTS
OMEU66
OMESB97
4
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SPRING BUSH KIT
UNIT
PRICE $
UNIT
PRICE $
2
2
2
REMARKS:
1
FK22 Front Shock absorber upper mount support bracket kit is a mandatory fitment.
COURIER/RANGER 1 TONNE 1985 - 2005 ALL MODELS
FRONT
PART NUMBER
SHOCK ABSORBER
FITTING KIT
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
U BOLTS
SPRING BUSH KIT
QTY
303005
N51
FK22
UNIT
PRICE $
1
1
2
1
ALL MODELS
PART NUMBER
QTY
CS026R
*N53 / N53C
2
CS027R
N53
2
OMEU65
OMESB82
4
UNIT
PRICE $
2
2
2
REMARKS:
1
FK22 support brackets must be installed to upper front shock mounting brackets on late 1996 on models
manufactured in Thailand.
Page 17
FORD
FORD EXPLORER 1996 ON REAR LEAF SPRING MODELS
FRONT
V6 PETROL ENGINE
PART NUMBER
TORSION BARS
SHOCK ABSORBER
N16
QTY
UNIT
PRICE $
1
2
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
PART NUMBER
CS042R
N17
QTY
2
UNIT
PRICE $
2
2
REMARKS:
1
Raise or lower front end clearance and trim vehicle by adjusting front torsion bars.
2
OE spring bushes are required to fit CS042R springs. D10XL extra leaf should be fitted when a constant 200kg
plus load is carried.
FORD F250 & F350 2005 ON ALL MODELS
FRONT
SPRING: TO 100 KGS
SHOCK ABSORBER
CASTER CORRECTION KIT
REAR
Estimated Lift: 60+mm
V8 DIESEL: COIL SPRING
PART NUMBER
QTY
OME768
N195
2
FK36
2
4
1
ALL MODELS LEAF SPRING
PART NUMBER
SPRING: MEDIUM LOAD
THIRD STAGE
CS048R
TSXL01
SPRING:CONSTANT 600+KGS
QTY
1
2
1
2
CS048R
1
2
XL LEAF
D27XL
2
2
CENTRE BOLT
UCB10
N179
1
2
SHOCK ABSORBER
OMEU68
4
U BOLTS - WITH OVERLOAD LEAF
OMEU67
4
SPACER KIT
FK31
FK35
OMESK1
UNIT
PRICE $
2
U BOLTS - NO OVERLOAD LEAF
FITTING KIT
UNIT
PRICE $
3
1
3
1
REMARKS:
1
Springs are supplied with bushes fitted.
Where the OE spring has an overload leaf fitted, it must be replaced with a TSXL01 and the CS048R original
centre bolt replaced by a UCB10, the original spacing block must also be re-fitted using U Bolts OMEU67.
2
To maintain 60mm lift for loads over constant 600 KGS and add D27XL Extra Leaf.
3
Fitment of Driveline Spacer Kit FK31 for Crew Cab or FK35 for Xtra Cab is recommended to reduce possible
driveline vibration. If required, additional spacing down of the centre bearing can be achieved by using an
OMESK1 Spacer kit.
4
Fitment of a FK36 Caster Correction Kit will provide approximately 3.5 to 4.0 degrees of extra caster. It is
advisable to have a Front End Alignment carried out to determine if a FK36 kit is required.
Page 18
FORD
FORD F250 & F350 1999 - 2004 ALL MODELS
FRONT
SPRING: TO 150 KGS
F250 PETROL & DIESEL
PART NUMBER
SHOCK ABSORBER
CS015F
N178
ADJUSTABLE PANHARD ROD
APRF250
U BOLTS - USA MODELS
U BOLTS - BRAZIL MODELS
REAR
SPRING: TO 600 KGS
THIRD STAGE
SHOCK ABSORBER - SINGLE FITMENT
SHOCK ABSORBER - DUAL FITMENT
XL LEAF
THIRD STAGE
SHOCK ABSORBER - SINGLE FITMENT
SHOCK ABSORBER - DUAL FITMENT
U BOLTS
FITTING KIT
FITTING KIT
QTY
6
1
UNIT
PRICE $
2
1
APRF250
2
OMEU69A
2
OMEU70
OMEU70A
2
5
2
-
6
2
2
1
1
4
UNIT
PRICE $
F350 ALL MODELS
PART NUMBER
QTY
CS048R
5
TSXL01
5
2
2
N179
N179 + N180
2
2+2
N179
-
CS048R
3
2
CS048R
3
2
D27XL
3
2
D27XL
3
2
TSXL01
5
2
N179
N179 + N180
2
OMEU68
FK31
FK35
OME660
2
2
2
2+2
N179
-
4
OMEU67
4
2
4
1
2
1
FK31
FK35
OME660
4
1
2
1
REMARKS:
1
APRF250 Adjustable Panhard Rod must be fitted to allow original axle location to be restored, bushes are
supplied in Rod.
2
For models with dual shock fitment N179 must be fitted rear of the axle, as it is longer than the N180.
OME660 stone shields are also a recommended fitment to the rear shocks.
3
To help maintain 60mm lift, add one D27XL Extra Leaf for every 400 KGS carried over 600 KGS.
4
Fitment of FK31 to Crew Cab or FK35 to Xtra Cab models is recommended to reduce possible driveline vibration.
5
As the CS048R has a different spring camber, compared to the original spring, the overload leaf must be
replaced with a TSXL01. The Original spacing block must be refitted. Springs are supplied with bushing.
6
Springs are supplied with bushing.
Page 19
UNIT
PRICE $
-
2
QTY
QTY
OMEU69
F250 ALL MODELS
CS048R
PART NUMBER
CS015F
N178
2
OMEU69
PART NUMBER
F350 PETROL & DIESEL
UNIT
PRICE $
HOLDEN / ISUZU / GM
JACKAROO/TROOPER & MONTEREY 3/2001 - 2004
SWB & LWB
FRONT
PART NUMBER
TORSION BARS
SHOCK ABSORBER
*N65 / N26F
QTY
UNIT
PRICE $
1
2
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
PART NUMBER
OME919
*N15 / N15C
QTY
2
UNIT
PRICE $
2
2
OME929
N15
2
2
JACKAROO/TROOPER & MONTEREY 1992 - 2/2001
SWB & LWB
FRONT
PART NUMBER
TORSION BARS
SHOCK ABSORBER
*N65 / N26F
QTY
UNIT
PRICE $
1
2
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
PART NUMBER
OME912
*N15 / N15C
QTY
2
OME919
N15
UNIT
PRICE $
2
2
2
2
REMARKS:
1
2
Coil must be installed with progressive rate to the top.
Page 20
HOLDEN / ISUZU / GM
JACKAROO/ISUZU TROOPER 1982 - 3/1992
ALL MODELS
FRONT
PART NUMBER
SHOCK ABSORBER
REAR
303004
*N65 / N26F
QTY
1
1
2
ALL MODELS
PART NUMBER
QTY
SPRING: MEDIUM LOAD
CS028R
2
SHOCK ABSORBER
N88
*N42 / N89
CS029R
SHOCK ABSORBER
N88
N42
2
UNIT
PRICE $
2
2
2
2
SPRING BUSH KIT
OMESB90
U BOLTS
OMEU59A
3
4
ANTI INVERSION KIT
FK14
OMEGS3
4
1
UNIT
PRICE $
2
1
REMARKS:
1
Torsion Bar 303004 suit models from 8/88 to 3/92 only.
2
N88: Suits 11/'86 to 3/'92 models and requires OMEB11 bush kit to convert lower bush from 19mm to 16mm ID.
N42/N89: Suits models '82 to 10/'86 (no bush kit required).
3
Where the OE spring has 4 leaves OMEU59A U Bolts are required.
4
FK14 Anti Inversion kit must be fitted if greasable shackles are not fitted.
GM FRONTERA 5 DOOR 1999 - 6/2003
FRONT
TORSION BARS
SHOCK ABSORBER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
PART NUMBER
QTY
*N65 / N26F
2
UNIT
PRICE $
ALL MODELS
PART NUMBER
QTY
OME913
N102
2
Page 21
2
UNIT
PRICE $
HOLDEN / ISUZU / GM
GM FRONTERA 1995 - 1998
2 & 4 DOOR UT MODELS
FRONT
TORSION BARS
SHOCK ABSORBER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
PART NUMBER
QTY
*N65 / N26F
2
UNIT
PRICE $
ALL MODELS
PART NUMBER
QTY
OME912
N15C
2
UNIT
PRICE $
2
COLORADO RC 2008 ON ALL MODELS
RODEO/D-MAX RA 2003 ON ALL MODELS
FRONT
PETROL ENGINE
PART NUMBER
TORSION BARS
SHOCK ABSORBER
REAR
QTY
1
1
303012
2
2
N65
2
2
SHOCK ABSORBER
CS025R
N42
SPRING BUSH KIT
OMESB80
2
OMEU66
4
FK26
OMEGS13
1
U BOLTS
ANTI INVERSION KIT
QTY
1
UNIT
PRICE $
1
2
ALL MODELS
CS024R
*N42 / N89
PART NUMBER
N65
N150
QTY
SPRING: MEDIUM LOAD
UNIT
PRICE $
303012
PART NUMBER
SHOCK ABSORBER
DIESEL ENGINE
UNIT
PRICE $
2
2
1
REMARKS:
1
It has been found, due to vehicle manufacturing tolerances, that in some cases front shock absorbers
may contact the steering arm when on full lock. Fitter should check for this and where required a small
indentation should be made to the body of the shock absorber.
2
Fit N65 when installing 303012 Torsion Bar to Petrol Models and N150 for OE Torsion Bars.
Page 22
`
HOLDEN / ISUZU / GM
RODEO/D-MAX TO 2003 ALL MODELS
FRONT
PART NUMBER
SHOCK ABSORBER
303004
*N65 / N26F
REAR
QTY
1
UNIT
PRICE $
1
2
ALL MODELS
PART NUMBER
QTY
CS028R
*N42/N89
2
2
SHOCK ABSORBER
CS029R
N42
SPRING BUSH KIT
OMESB80
SPRING: MEDIUM LOAD
SHOCK ABSORBER
ANTI INVERSION KIT
U BOLTS
UNIT
PRICE $
`
2
2
2
FK14
3
OMEGS3
OMEU59A
2
1
1
4
REMARKS:
1
2
Vehicles with 4 Leaf OE Spring Stack require U bolts OMEU59A.
3
FK14 must be fitted if OMEGS3 greasable shackles are not fitted.
DROVER ALL MODELS
FRONT
PART NUMBER
QTY
CS012FA / B
OME015
1+1
1+1
SHOCK ABSORBER
CS013FA / B
OME015
SPRING BUSH KIT
OMESB19
SPRING: TO 35 KGS
SHOCK ABSORBER
U BOLTS
FITTING KIT
TRIM PACKER
STEERING DAMPER
REAR
OMEU61
2
2
2
1
4
FK06
1
TP05
OMESD30
1
ALL MODELS
PART NUMBER
QTY
CS038R
OME013
2
2
SHOCK ABSORBER
CS039R
OME013
SPRING BUSH KIT
OMESB19
2
OMEU61
TP05
4
SPRING: MEDIUM LOAD
SHOCK ABSORBER
U BOLTS
TRIM PACKER
UNIT
PRICE $
UNIT
PRICE $
2
2
REMARKS:
1
1 only OMEU62 may be required on the right hand side inner, on some models.
Page 23
`
HYUNDAI
TERRACAN 2001 ON
FRONT
TORSION BARS
SHOCK ABSORBER
PETROL ENGINES
PART NUMBER
QTY
N170
2
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
UNIT
PRICE $
DIESEL ENGINES
PART NUMBER
QTY
N162
2
UNIT
PRICE $
ALL MODELS
PART NUMBER
QTY
OME603
N171
2
OME604
N172
2
UNIT
PRICE $
2
2
KIA
SORENTO
FRONT
SPRING:
STRUT
REAR
SPRING: LIGHT LOAD
SHOCK ABSORBER
SPRING: MEDIUM LOAD
SHOCK ABSORBER
ALL MODELS
PART NUMBER
QTY
OME902
2
OME601
N147S + N148S
UNIT
PRICE $
2
2
1+1
MODELS 2006 ON
PART NUMBER
QTY
-
UNIT
PRICE $
MODELS 2003 TO LATE 2006
PART NUMBER
OME602
N149
OME622
N205
2
2
OME903
N149
QTY
2
1
1
REMARKS:
1
OME661 Stone Guards are recommended fitment to vehicles driven on dirt roads to prevent stone damage to
the shock absorbers.
2
N147S fits RHS, N148S fits LHS.
Page 24
2
2
2
UNIT
PRICE $
LADA NIVA
LADA NIVA
FRONT
SPRING:
SHOCK ABSORBER
TRIM PACKER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
PART NUMBER
QTY
OME791
2
UNIT
PRICE $
NOT AVAILABLE
OMELNF10
ALL MODELS
PART NUMBER
QTY
OME792
NOT AVAILABLE
2
Page 25
UNIT
PRICE $
LAND ROVER
DISCOVERY 3 2005 ON ALL COIL MODELS
FRONT
PART NUMBER
QTY
SPRING:
OME744
2
SPRING: 100 KGS +
OME745
USE OE
STRUT
REAR
2
1
ALL MODELS
PART NUMBER
QTY
SPRING: MEDIUM LOAD
OME746
2
OME743
USE OE
STRUT
UNIT
PRICE $
UNIT
PRICE $
2
1
REMARKS:
1
Coils are suitable to be used with original OE struts, OME will not be developing replacement struts.
DISCOVERY 1999 - 2004 ALL COIL SUSPENSION MODELS
FRONT
SPRING: TO 20 KGS
SHOCK ABSORBER
SHOCK ABSORBER
SHOCK ABSORBER
STEERING DAMPER
COIL PACKER
PART NUMBER
OME776
*N107 / N107C
OME777
*N107 / N107C
OME779
N107
OMESD02
OMELRCP2
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
SHOCK ABSORBER
COIL PACKER
QTY
1
UNIT
PRICE $
2
2
1
2
2
1
2
2
1
2
ALL MODELS
PART NUMBER
QTY
OME781
*N108 / N108C
2
OME762
N108
2
OME763
N108
2
OMELRCP1
UNIT
PRICE $
2
2
2
2
REMARKS:
1
On 2003 models lift will be between 25 to 35mm.
2
8mm Steel Coil Seat Packer, refer to fitting instructions supplied with packer.
Important: To prevent possible over stressing of the spring, only one packer can be fitted under each coil seat.
Page 26
LAND ROVER
DISCOVERY TO 1998 & RANGE ROVER TO 5/1995
FRONT
Estimated Lift: To 40mm
PETROL ENGINES
PART NUMBER
QTY
OME760
*N115 / N45F
2
OME761
*N115 / N45F
2
2
SHOCK ABSORBER
OME767
N115
STEERING DAMPER
OMESD11
SHOCK ABSORBER
SHOCK ABSORBER
CASTER KIT
COIL PACKER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
SHOCK ABSORBER
COIL PACKER
CALR1
CALR2
OMELRCP1
UNIT
PRICE $
DIESEL ENGINES
PART NUMBER
-
2
OME751
*N115 / N45F
2
2
2
OME767
N115
1
OMESD11
1
2
1
QTY
CALR1
1
CALR2
OMELRCP1
2
2
2
1
1
2
ALL MODELS
PART NUMBER
QTY
OME764
*N46 / N27
2
OME762
*N44 / N46
2
OME763
N44
2
OMELRCP1
UNIT
PRICE $
2
2
2
2
REMARKS:
1
CALR1 : Fits pre '86 Range Rover.
CALR2 : Fits post '86 Range Rover, all Discovery & Defender 130 Dual Cab Utility.
NB: Do not fit to automatic Range Rovers or Discovery due to possible vibration problems.
2
8mm Steel Coil Seat Packer, refer to fitting instructions supplied with packer.
Page 27
UNIT
PRICE $
LAND ROVER
DEFENDER & COUNTY 110
FRONT
SHOCK ABSORBER
V8 PETROL
PART NUMBER
OME761
N45F
SHOCK ABSORBER
OME751
N115
STEERING DAMPER
OMESD32
CASTER KIT
COIL PACKER
FRONT
CALR1
CALR2
OMELRCP1
QTY
1
1
1
2
OME766
N115
1
1
OMESD32
1
1
CALR1
1
2
2
OMELRCP1
4
2
SHOCK ABSORBER
OME767
N115
STEERING DAMPER
OMESD32
1
COIL PACKER
REAR
Estimated Lift: To 55 mm
SPRING: LIGHT LOAD: 25mm
SHOCK ABSORBER
SHOCK ABSORBER
SHOCK ABSORBER
COIL PACKER
UNIT
PRICE $
2
2
2
2
4
2.5 DIESEL
2
CASTER KIT
QTY
1
OME751
N45F
PART NUMBER
OME766
*N115 / N45F
QTY
UNIT
PRICE $
2
PART NUMBER
SHOCK ABSORBER
3.9 ISUZU DIESEL ENGINE
CALR1
CALR2
OMELRCP1
UNIT
PRICE $
2
2
1
1
4
ALL MODELS
PART NUMBER
OME752
*N46 / N27
QTY
2
OMELRCP3
2
2
OME755
N44
OME754
N44
UNIT
PRICE $
2
2
3
2
2
4
REMARKS:
1
Caution: Due to altered gearbox mounts on models after 1998 any lift above OE ride height may cause front
driveline vibration that can only be rectified by fitment of front Double Cardan joints.
Caster Kit will increase caster angle by 2o. Check manufacturer's specifications to determine if caster kit is required.
CALR1 suits 38mm wide control arms. CALR2 suits 44mm wide control arms.
2
OME752 coil has a softer spring than OE coil. This is to provide improved ride quality with light loads only
OE springs are designated as medium load springs.
3
Where original springs have an inner helper coil, be sure to refit helper coil when installing OME coils.
4
8mm Steel Coil Seat Packer, refer to selection chart supplied with packer.
Page 28
LAND ROVER
DEFENDER 130 MODELS
FRONT
2.5 DIESEL ENGINE
PART NUMBER
QTY
OME751
*N115 / N45F
2
OME767
N115
2
SHOCK ABSORBER
STEERING DAMPER
OMESD32
SPRING: TO 50 KGS
SHOCK ABSORBER
CASTER KIT
COIL PACKER
REAR
SPRING: LIGHT LOAD: 25mm
SHOCK ABSORBER
SHOCK ABSORBER
COIL PACKER
CALR2
OMELRCP1
UNIT
PRICE $
2
2
1
1
1
3
DIESEL ENGINES
PART NUMBER
OME755
*N44 / N46
QTY
2
2
2
OME754
N44
OMELRCP3
UNIT
PRICE $
2
2
3
90 SERIES
FRONT
SPRING: TO 50 KGS
SHOCK ABSORBER
SHOCK ABSORBER
STEERING DAMPER
CASTER KIT
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SPRING:CONSTANT 200 KGS
SHOCK ABSORBER
PETROL ENGINES
PART NUMBER
QTY
OME761
N45F
2
OME751
N115
2
OMESD32
CALR1
UNIT
PRICE $
2
2
PART NUMBER
QTY
OME751
N115
2
OME767
N115
2
OMESD32
CALR1
1
1
DIESEL ENGINES
1
2
2
1
1
1
ALL MODELS
PART NUMBER
QTY
OME764
*N46 / N27
2
OME762
*N44 / N46
2
UNIT
PRICE $
2
2
REMARKS:
1
Caution: Due to altered gearbox mounts on models after 1998 any lift above OE ride height may cause front
driveline vibration that can only be rectified by fitment of front Double Cardan joints.
Caster Kit will increase caster angle by 2o. Check manufacturer's specifications to determine if caster kit is required.
CALR1 suits 38mm wide control arms. CALR2 suits 44mm wide control arms.
2
Important: OME755 has reduced spring rate from OE to provide improved ride quality for light loads.
3
8mm Steel Coil Seat Packer, refer to selection chart supplied with packer.
Page 29
UNIT
PRICE $
MAZDA
BT50 1 TONNE 12/2006 ON ALL MODELS
FRONT
PART NUMBER
SHOCK ABSORBER
FITTING KIT
REAR
QTY
303013
*N194 / N187
1
FK22
2
1
2
1
ALL MODELS
PART NUMBER
QTY
CS056R
N189
2
2
SHOCK ABSORBER
CS049R
N189
OMEGS18
1
U BOLTS
OMEU66
OMESB97
4
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SPRING BUSH KIT
UNIT
PRICE $
UNIT
PRICE $
2
2
2
B SERIES 1 TONNE 1987 - 2006 ALL MODELS
FRONT
PART NUMBER
SHOCK ABSORBER
FITTING KIT
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
U BOLTS
SPRING BUSH KIT
QTY
303005
1
1
N51
FK22
2
2
UNIT
PRICE $
1
ALL MODELS
PART NUMBER
QTY
CS026R
*N53 / N53C
2
CS027R
N53
2
OMEU65
OMESB82
4
UNIT
PRICE $
2
2
2
REMARKS:
1
2
FK22 Front shock absorber upper mount supporting bracket kit is a mandatory
fitment.
Page 30
MITSUBISHI
PAJERO / MONTERO NS, NP & NM 2000 ON LWB
FRONT
SPRING: TO 50 KGS
STRUT
STRUT
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
V6 PETROL ENGINE
PART NUMBER
QTY
OME914
N129S
2
OME915
N203S
2
UNIT
PRICE $
2
2
ALL MODELS
PART NUMBER
OME917
*N152/N110
OME918
*N204/N152
QTY
1
UNIT
PRICE $
2
2
1
2
2
PAJERO / MONTERO NS, NP & NM 2000 ON LWB
FRONT
SPRING: TO 50 KGS
STRUT
STRUT
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
2.8 & 3.2 DIESEL ENGINES
PART NUMBER
QTY
OME915
N129S
2
OME924
N203S
2
2
2
ALL MODELS
PART NUMBER
OME917
*N152/N110
OME918
*N204/N152
QTY
1
2
2
1
REMARKS:
1
UNIT
PRICE $
It is recommended that a 4 wheel alignment is carried out.
Page 31
2
2
UNIT
PRICE $
MITSUBISHI
PAJERO / MONTERO NS, NP & NM 2000 ON SWB
FRONT
SPRING: TO 50 KGS
STRUT
STRUT
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
V6 PETROL ENGINE
PART NUMBER
QTY
OME914
*N129S/N109S
2
OME915
*N203S/N129S
2
UNIT
PRICE $
2
2
ALL MODELS
PART NUMBER
OME994
*N152/N110
OME917
*N204/N152
QTY
1
UNIT
PRICE $
2
2
1
2
2
PAJERO / MONTERO NS, NP & NM 2000 ON SWB
FRONT
SPRING: TO 50 KGS
STRUT
STRUT
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
3.2 DIESEL ENGINES
PART NUMBER
QTY
OME915
N129S
2
OME924
N203S
2
2
2
ALL MODELS
PART NUMBER
OME994
*N152/N110
OME917
*N204/N152
QTY
1
2
2
1
REMARKS:
1
UNIT
PRICE $
It is recommended that a 4 wheel alignment is carried out.
Page 32
2
2
UNIT
PRICE $
MITSUBISHI
PAJERO / MONTERO 1991 - 1999
SWB & LWB REAR LEAF SPRING MODELS
FRONT
PART NUMBER
303010
303011
N18
SHOCK ABSORBER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
SPRING BUSH KIT
QTY
1
UNIT
PRICE $
1
1
2
ALL MODELS
PART NUMBER
QTY
CS022R
*N56 / N54
2
CS023R
N56
2
OMESB38
OMEGS16
UNIT
PRICE $
2
2
2
2
1
REMARKS:
1
303010 suits 88 to 90 V6 models and all models 91 to 94 - length 1278mm.
303011 suits all models 95 to 00 - length 1308mm.
2
OMESB38 must be used to fit OME springs.
ALL LWB REAR COIL SPRING MODELS
FRONT
PART NUMBER
SHOCK ABSORBER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
303010
303011
N18
QTY
1
UNIT
PRICE $
1
1
2
ALL MODELS
PART NUMBER
QTY
OME910
N64
2
OME938
N64
2
UNIT
PRICE $
2
2
REMARKS:
1
303010 suits all models 91 to 94 with 1278mm length.
303011 suits all models 95 to 00 with 1308mm length.
Page 33
MITSUBISHI
ALL SWB REAR COIL SPRING MODELS
FRONT
PART NUMBER
TORSION BARS
N18
SHOCK ABSORBER
REAR
QTY
UNIT
PRICE $
1
2
ALL MODELS
PART NUMBER
QTY
OME911
N64
2
SPRING: MEDIUM LOAD
SHOCK ABSORBER
UNIT
PRICE $
2
REMARKS:
1
PAJERO / MONTERO TO 1991
REAR LEAF SPRING MODELS
(Hyundai Galloper)
FRONT
4 CYLINDER ENGINE
PART NUMBER
303009
N60G
SHOCK ABSORBER
REAR
QTY
1
UNIT
PRICE $
1
2
ALL MODELS
PART NUMBER
QTY
CS022R
*N56 / N54
2
2
SHOCK ABSORBER
CS023R
N56
SPRING BUSH KIT
OMESB8
2
2
OMEU54
OMEGS16
3
4
SPRING: MEDIUM LOAD
SHOCK ABSORBER
U BOLTS
UNIT
PRICE $
2
2
1
REMARKS:
1
303009 suits 82 to 90 4 cylinder models - length 1278mm.
2
OMESB8 must be used with CS022R and CS023R springs.
3
OMEU54 only required on SWB models.
Page 34
MITSUBISHI
PAJERO CHALLENGER 1989 - 1991
REAR COIL SPRING MODELS
(Hyundai Galloper)
FRONT
PART NUMBER
SHOCK ABSORBER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
303010
N60G
QTY
1
UNIT
PRICE $
1
2
ALL MODELS
PART NUMBER
QTY
OME910
N62G
2
UNIT
PRICE $
2
REMARKS:
1
303010 suits 88 to 90 V6 models.
TRITON / L200 ML 2006 ON ALL MODELS
FRONT
SPRING: TO 50 KGS
STRUT
STRUT
REAR
SPRING: LIGHT LOAD
SHOCK ABSORBER
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
U BOLT
SPRING BUSH KIT
DIESEL ENGINE
PART NUMBER
QTY
OME605
N186S
2
OME606
N186S
2
V6 PETROL ENGINE
UNIT
PRICE $
2
2
ALL MODELS
PART NUMBER
CS040R
N54
CS053R
*N59/N54
CS054R
N59
QTY
2
2
2
2
2
2
2
2
OMEU71
OMESB38
OMEGS16
2
4
2
1
1
REMARKS:
1
OMEGS16 is a mandatory fitment to prevent springs from inverting.
2
Springs can be only installed with OME Bush Kit.
The Centre Bolt on CS040R must be reversed prior to fitment.
Page 35
UNIT
PRICE $
PART NUMBER
QTY
OME611
N186S
2
OME605
N186S
2
2
2
UNIT
PRICE $
MITSUBISHI
TRITON / L200 09/1986 - 2005 ALL MODELS
FRONT
PART NUMBER
SHOCK ABSORBER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
U BOLTS
QTY
303006
1
1
N60G
*N18 / N57G
3
2
ALL MODELS
PART NUMBER
QTY
CS022R
2
2
N30
N30E
3
2
CS023R
2
2
N30
N30E
3
2
OMEU57
UNIT
PRICE $
4
SPRING BUSH KIT
OMESB38
2
2
ANTI-INVERSION KIT
FK30
OMEGS16
4
1
4
1
UNIT
PRICE $
REMARKS:
1
Torsion Bar 303006 suits 1993 MJ on models with 39 splines.
2
OME springs can only be installed with OME bush kits.
3
N60G & N30 suit pre MK Models (approx. 1986 to 1995)
N18 / N57G & N30E suit MK Models (approx. 1996 to 2005)
4
FK30 Anti-Inversion kit is a mandatory fitment, with or without Greasable Shackle Kit.
Page 36
MITSUBISHI
CHALLENGER / MONTERO SPORT
2000 ON LWB COIL REAR MODELS
FRONT
V6 PETROL ENGINE
PART NUMBER
SHOCK ABSORBER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
303011
N57G
QTY
1
UNIT
PRICE $
1
2
ALL MODELS
PART NUMBER
QTY
OME911
N116
2
OME910
N116
2
UNIT
PRICE $
2
2
CHALLENGER V6 / MONTERO WAGON
1998 ON (REAR LEAF SPRING MODELS)
FRONT
PART NUMBER
SHOCK ABSORBER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
SPRING BUSH KIT
303011
N57G
QTY
1
UNIT
PRICE $
1
2
ALL MODELS
PART NUMBER
CS040R
*N56 / N54
CS041R
N56
OMESB83
OMEGS16
QTY
3
UNIT
PRICE $
2
2
2
2
2
3
2
2
1
REMARKS:
1
303011 suits all models 95 to 00 - length 1308mm.
2
OMEGS16 is a mandatory fitment to prevent springs from inverting.
3
Springs can be only installed with OME Bush Kit.
The Centre Bolt on CS040R must be reversed prior to fitment.
Page 37
NISSAN
PATROL GU Y61 ALL LWB MODELS
FRONT
PETROL 4.5, 4.8 &
DIESEL 4.2
PART NUMBER
QTY
OME970
*N19 / N19C
2
OME971
N19
2
2
SHOCK ABSORBER
OME972
*N19 / N19C
CASTER KIT
OMECA77B
SPRING: TO 50 KGS
SHOCK ABSORBER
SHOCK ABSORBER
SPRING: 50 KGS: 20mm LIFT
STEERING DAMPER
TRIM PACKER
OIL PAN PACKER KIT
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
OMESD11
OMESD01
2
5
FK25
2
OME973
*N19 / N19C
2
OME970
N19
2
2
2
OME974
*N19 / N19C
1
OMECA77B
OMESD11
1
OMESD01
2
2
2
2
1
5
1
OMEGQPF05
OMEGQPF10
1
FK25
2
1
1
ALL MODELS
PART NUMBER
OME980
*N29 / N29C
SPRING: MEDIUM 30mm LIFT
OME982
*N29 / N29C
SWAY BAR EXT KIT
QTY
2
1
OME981
N29
TRIM PACKER
PART NUMBER
2
OMEGQPF05
OMEGQPF10
SHOCK ABSORBER
SHOCK ABSORBER
UNIT
PRICE $
DIESEL 2.8 & 3.0 TURBO
QTY
4
UNIT
PRICE $
2
2
4
2
2
4
2
2
Do not use Packers
FK18
FK24
3
1
REMARKS:
1
Coil trim packers may be required to trim vehicles.
Packers must be installed to the bottom of front coils.
2
OMECA77B caster kit will increase caster angle by 2o. Check manufacturer's specifications to determine if
OMECA77B kit is required. FK25 may be required for some European models when caster kit is fitted.
3
FK18: Rear sway bar extension bracket is mandatory fitment to models with fixed sway bar to prevent damage
to sway bar when suspension is at full extension. FK24 suits models with detachable sway bar.
4
Special Note: Due to limited clearance between tailshaft and chassis cross member, OME does not recommend
fitment of gear box packers.
5
OMESD11 steering damper fits all models up to 1/2000. OMESD01 fits 2/2000 models on.
Page 38
UNIT
PRICE $
NISSAN
PATROL GU Y61 SWB
FRONT
SPRING: TO 50 KGS
SHOCK ABSORBER
SHOCK ABSORBER
TRIM PACKER
STEERING DAMPER
CASTER KIT
OIL PAN PACKER KIT
REAR
SPRING: LIGHT LOAD
SHOCK ABSORBER
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
SWAY BAR EXT KIT
GEAR BOX PACKER KIT
TRIM PACKER
2.8 & 3.0 TURBO DIESEL
PART NUMBER
QTY
OME974E
*N19 / N19C
2
OME972E
N19
2
UNIT
PRICE $
2
2
OMEGQPF05
OMEGQPF10
OMESD01
OMESD11
OMECA77B
FK25
1
1
2
1
3
1
ALL MODELS
PART NUMBER
QTY
OMEGQ02A
*N29 / N29C
2
OMEGQ02B
*N29 / N29C
2
OMEGQ02D
N29
2
FK18
FK24
GQGK02
UNIT
PRICE $
2
2
2
4
1
5
1
OMEGQPR05
OMEGQPR10
REMARKS:
1
OMESD01 fits 2/2000 on models.
OMESD11 fits all models to 1/2000.
2
OMECA77B kit is required.
3
FK25 Oil Pan Kits must be installed when fitting GQGK02 Gear Box Packer Kit.
When installing caster kit OMECA77B an additional FK25 oil pan kit is required.
4
FK18: Rear sway bar extension bracket is mandatory fitment to models with fixed sway bar to prevent damage
to sway bar when suspension is at full extension. FK24 suits models with detachable sway bar.
5
GQGK02 Gear Box Packer Kit is designed to space down the gear box cross member from the chassis to
reduce tail shaft flange angle thereby reducing driveline vibration. In some cases 2 kits may be required.
Page 39
NISSAN
PATROL GU Y61 ALL COIL CAB CHASSIS MODELS
FRONT
ALL 4.2 DIESEL ENGINES
PART NUMBER
QTY
OME970
*N19 / N19C
2
OME971
N19
2
SHOCK ABSORBER
STEERING DAMPER
OMESD11
SPRING: TO 50 KGS
SHOCK ABSORBER
CASTER KIT
TRIM PACKER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
SHOCK ABSORBER
FITTING KIT
TRIM PACKER
OMECA77B
OMEGQPF05
OMEGQPF10
UNIT
PRICE $
PART NUMBER
QTY
OME973
*N19 / N19C
2
OME970
N19
2
2
1
OMESD11
1
OMECA77B
1
OMEGQPF05
OMEGQPF10
2
2
1
3.0 TURBO DIESEL ENGINES
2
2
2
1
ALL MODELS
PART NUMBER
QTY
OME983
N29
2
OME984
N29
2
OME985
N29
2
FK18
Do not use Packers
UNIT
PRICE $
2
2
2
3
1
REMARKS:
1
2
Coil trim packers may be required to trim vehicle to a maximum of 15mm.
Packers must be installed to the bottom on front coil.
3
FK18 rear sway bar extension bracket is mandatory fitment to prevent damage
to sway bar when suspension is at full extension.
Page 40
1
UNIT
PRICE $
NISSAN
PATROL GU Y61 CAB CHASSIS
COIL: FRONT / LEAF: REAR
FRONT
SPRING: TO 50 KGS
SHOCK ABSORBER
SHOCK ABSORBER
STEERING DAMPER
CASTER KIT
TRIM PACKER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
ALL 4.2 DIESEL ENGINES
PART NUMBER
QTY
OME970
*N19 / N19C
2
OME971
N19
2
OMEGQPF05
OMEGQPF10
2
QTY
OME973
*N19 / N19C
2
OME970
N19
2
2
2
1
OMESD11
1
OMECA77B
2
OMEGQPF05
OMEGQPF10
1
1
PART NUMBER
CS016RA / B
N25
SHOCK ABSORBER
SPRING BUSH KIT
OMESB64
GREASABLE SHACKLE KITS
2
PART NUMBER
1
ALL MODELS
CS016RA / B
N25
ANTI INVERSION KIT
2
OMESD11
OMECA77B
UNIT
PRICE $
3.0 TURBO DIESEL ENGINES
FK08
QTY
4
UNIT
PRICE $
1+1
2
1+1
2
2
3
OMEGS1
OMEGP2
1
1
1
REMARKS:
1
Coil trim packers may be required to trim vehicle to a maximum of 15mm per coil.
Packers must be installed to the bottom on front coils.
2
3
FK08 anti inversion kit is mandatory fitment if greasable shackles are not fitted.
Refer OME Technical & Fitting Manual.
4
For improved ride quality on vehicles carrying medium loads remove the 3rd leaf.
Page 41
1
UNIT
PRICE $
NISSAN
PATROL GQ Y60 ALL SWB & LWB MODELS
FRONT
SPRING: TO 50 KGS
SHOCK ABSORBER
SHOCK ABSORBER
SHOCK ABSORBER
TRIM PACKER
STEERING DAMPER
CASTER KIT
REAR
SPRING: LIGHT LOAD
SHOCK ABSORBER
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
4.2 ENGINES
PART NUMBER
QTY
OME975
*N21 / N23F
2
OME976
N21
2
OME974
*N21 / N23F
2
OMEGQPF05
OMEGQPF10
OMESD36
OMESD34
OMECA77B
2.8 & 3.0 ENGINES
UNIT
PRICE $
2
2
2
SHOCK ABSORBER
TRIM PACKER
1
2
1
PART NUMBER
QTY
OMEGQ02C
N22F
2
GEAR BOX PACKER KIT
OME972
N21
2
OMESD36
OMESD34
OMECA77B
OMEGQ02AM
*N29 / N22F
2
OMEGQ02J
N29
2
UNIT
PRICE $
2
2
2
2
1
5
1
2
1
PART NUMBER
QTY
OMEGQ02CM
N22F
2
OMEGQ02C
*N29 / N22F
2
OMEGQ02G
N29
2
2
2
LPG CONVERSIONS
2
OMEGQ02LP
N29
1
Do not use Packers
3
GQGK01
2
UNIT
PRICE $
2
4
2
2
1
REMARKS:
1
Coil trim packers may be required to trim vehicle to a maximum of 15mm per coil.
Packers must be installed to the top on rear coils and to the bottom on front coils.
2
3
Gearbox packer kit is designed to space down the gearbox cross member from the chassis to reduce tail shaft
flange angle thereby reducing driveline vibration.
4
LPG conversion equated to 100-125 litre rear mounted gas tank and a 70-75 litre mid mounted auxiliary petrol
tank.
5
OMESD36 fits 8/89 models onwards.
OMESD34 fits pre 8/89 models.
Page 42
UNIT
PRICE $
SWB MODELS
2
Do not use Packers
3
GQGK01
2
OMEGQPF10
5
4
OME974
*N21 / N23F
OMEGQPF05
1
LWB MODELS
OMEGQ02LP
N29
QTY
NOT APPLICABLE
-
LPG CONVERSIONS
SPRING: MEDIUM LOAD
PART NUMBER
NISSAN
PATROL GQ Y60 CAB CHASSIS COIL SPRING MODELS
FRONT
SPRING: TO 50 KGS
SHOCK ABSORBER
SHOCK ABSORBER
TRIM PACKER
STEERING DAMPER
CASTER KIT
REAR
SPRING: MEDIUM LOAD
40mm LIFT
SHOCK ABSORBER
SHOCK ABSORBER
TRIM PACKER
GEAR BOX PACKER KIT
4.2 ENGINES
PART NUMBER
QTY
OME975
N23F
2
OME976
N21
2
OMEGQPF05
OMEGQPF10
OMESD36
OMECA77B
REMARKS:
UNIT
PRICE $
2
2
OMECA77B caster kit will increase
caster angle by 2o. Check
manufacturer's specifications to
determine if OMECA77B is required.
3
Gearbox packer kit is designed to
space down the gearbox cross member
from the chassis to reduce tail shaft
flange angle thereby reducing driveline
vibration.
1
1
2
1
PART NUMBER
QTY
OMEGQ02C
2
N22F
2
OMEGQ02J
N29
2
OMEGQPR10
GQGK01
Coil trim packers may be required to
trim vehicle to a maximum of 15mm per
coil. Packers must be installed to the
top on rear coils and to the bottom on
front coils.
2
ALL MODELS
OMEGQPR05
1
UNIT
PRICE $
2
1
3
1
PATROL GQ Y60 UTE & CAB CHASSIS LEAF SPRING MODELS
FRONT
SPRING: TO 50 KGS
SHOCK ABSORBER
4.2 ENGINES
PART NUMBER
CS003F
N28
SHOCK ABSORBER
CS004F
N28
SPRING BUSH KIT
OMESB1
STEERING DAMPER
REAR
SHOCK ABSORBER
QTY
1
2
1
2 FK08 Anti Inversion Kit is mandatory
2
fitment if greasable shackles are not
fitted. Refer OME Technical & Fitting
Manual.
2
OMEGS2
1
OMEGP2
OMESD22
1
3 For improved ride quality on vehicles
1
carrying medium loads remove the 3rd
leaf.
ALL MODELS
PART NUMBER
CS016RA / B
N25
QTY
3
1+1
2
1+1
SPRING BUSH KIT
OMESB64
2
OMEGS1
1
OMEGP2
1
ANTI INVERSION KIT
for front spring fitment.
2
CS016RA / B
N25
U BOLTS
1 CBS02 x 2 centre bolt spacers required
2
SHOCK ABSORBER
UNIT
REMARKS:
PRICE $
OMEU58B
FK08
2
4
2
Page 43
1
UNIT
PRICE $
NISSAN
PATROL MQ 260 LWB SPANISH BUILT ALL 2.8TD MODELS
FRONT
SPRING: TO 50 KGS
SHOCK ABSORBER
SPRING: 51-100 KGS
SHOCK ABSORBER
SPRING BUSH KIT
U BOLTS
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
SPRING BUSH KIT
U BOLTS
PART NUMBER
CS016F
QTY
1
2
*N19/N19C
2
CS016F
N19
2
OMSB31
2
2
OMESB29
OMEU56
OMEU57
UNIT
PRICE $
2
2
2
2
ALL MODELS
PART NUMBER
QTY
CS011R
N89
2
CS012R
* N42 / N89
2
OMESB2
2
OMESB29
OMEU58
2
REMARKS:
1
To improve ride quality remove 3rd leaf from top of spring
2
Front U bolt:
OMEU56 fits to right hand side.
OMEU57 fits to left hand side.
Page 44
2
2
4
UNIT
PRICE $
NISSAN
PATROL MQ M60 ALL MODELS
FRONT
SPRING: TO 50 KGS
SHOCK ABSORBER
SHOCK ABSORBER
SPRING BUSH KIT
SPRING BUSH KIT
U BOLTS
STEERING DAMPER
PART NUMBER
CS010FA / B
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
SPRING BUSH KIT
U BOLTS
1
EARLY *N47 / N96
LATE
N49
CS011FA / B
OMESB28
OMESB29
OMESB31
OMESB29
OMEU56
OMEU57
OMESD22
UNIT
PRICE $
1+1
2
1
EARLY *N47 / N96
LATE
N49
REAR
QTY
1+1
2
2
2
2
2
4
2
2
1
ALL MODELS
PART NUMBER
QTY
CS011R
N97
2
CS012R
N48
2
OMESB2
OMESB29
OMEU58
UNIT
PRICE $
2
2
3
2
4
REMARKS:
1
Models with P40 4 litre engine require CS011FA / B springs.
Individual vehicles fitted with A / B fitment may experience a pronounced trimming problem to right hand side.
In these cases fitment of an XL leaf to the right hand side will correct problem.
2
Front spring bushes:
Early model (round headlight) require
OMESB28 and OMESB29.
Late model (square headlight) require
OMESB31 and OMESB29.
3
OME bush kits must be used to enable springs to be fitted.
4
Front U bolt : OMEU56 fits to right hand side.
OMEU57 fits to left hand side.
Page 45
NISSAN
NAVARA D40 2005 ON ALL MODELS
FRONT
SPRINGS: TO 40 KGS
STRUT
SPRINGS: 41 TO 80 KGS
STRUT
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
SPRING BUSH KIT
U BOLTS
DIESEL & V6 PETROL
PART NUMBER
QTY
OME607
N183S
1
OME608
N183S
1
UNIT
PRICE $
2
2
2
2
ALL MODELS
PART NUMBER
CS050R
QTY
2
N185
UNIT
PRICE $
2
2
CS051R
2
N185
2
2
OMESB95
OMESB96
3
2
2
OMEGS15
OMEU53A
1
4
REMARKS:
1
OE plastic stone shield must be refitted onto N183S
2
CS050R & CS051R are supplied with fixed end bushing
3
OMESB95 only suits OE shackles.
OMESB96 only suits OMEGS15 Greasable Shackle kit.
NAVARA D22 10/2002 ON ALL MODELS
NP300 08 ON ALL MODELS
FRONT
SHOCK ABSORBER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
SPRING BUSH KIT
U BOLTS
PART NUMBER
303007
N151
QTY
1
1
2
2
UNIT
PRICE $
ALL MODELS
PART NUMBER
QTY
CS032R
N56
2
CS031R
N59
2
OMESB91
OMEU63
2
UNIT
PRICE $
2
2
4
REMARKS:
1
2
It may be necessary to slightly increase the clearance in the front wishbone to allow shock absorber to fit.
Do not modify shock absorber.
Page 46
NISSAN
NAVARA D21 & D22 PICK UP TO 8/2002 ALL MODELS
FRONT
SHOCK ABSORBER
STEERING DAMPER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
SPRING BUSH KIT
U BOLTS
PART NUMBER
303007
303008
N58
OMESD35
QTY
1
1
2
2
3
1
UNIT
PRICE $
ALL MODELS
PART NUMBER
QTY
CS030R
N56
2
CS031R
N59
2
OMESB81
OMEU63
2
UNIT
PRICE $
2
2
4
REMARKS:
1
303007 suits D22 & 303008 suits D21 models.
2
3
On later models steering damper was not fitted. Check vehicle to confirm it does have an original steering
damper fitted.
PATHFINDER R51 2005 ON
FRONT
DIESEL & V6 PETROL
PART NUMBER
QTY
SPRING: TO 40 KGS
STRUT
OME607
N183S
1
OME608
N183S
1
STRUT
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
UNIT
PRICE $
2
2
2
2
ALL MODELS
PART NUMBER
QTY
OME609
N184
2
OME610
N184
2
UNIT
PRICE $
2
2
REMARKS:
1
OE plastic stone shield must be refitted onto N183S and a 4 Wheel alignment
must be carried out after fitment of OME suspension.
Page 47
NISSAN
PATHFINDER R50 1996 - 2005 V6 MODELS
FRONT
V6 MODELS
PART NUMBER
QTY
OME921
2
SPRING: TO 50 KGS
OME923
2
STRUT
FITTING KIT
OME928
N143S + N144S
2
1+1
SMP638
2
1
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
UNIT
PRICE $
2
ALL MODELS
PART NUMBER
QTY
OME922
2
*N61 / N61C
N104
1
UNIT
PRICE $
2
REMARKS:
1
*N61 / N61C: Suit models to 1/'99. N104: Suit models from 2/'99 on.
2
Vehicles with ABS will require a SMP638 ABS bracket kit. N143S Right hand side x 1. N144S Left hand side x 1.
PATHFINDER TO LATE 1995 ALL MODELS
FRONT
PART NUMBER
TORSION BARS
SHOCK ABSORBER
STEERING DAMPER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
QTY
-
1
N26F
OMESD35
2
UNIT
PRICE $
2
1
ALL MODELS
PART NUMBER
QTY
OME920
*N42 / N89
2
UNIT
PRICE $
2
REMARKS:
1
2
Page 48
NISSAN
TERRANO II R20 1996 - 2005
FRONT
PETROL ENGINES
PART NUMBER
TORSION BARS
SHOCK ABSORBER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
*N65 / N26F
QTY
UNIT
PRICE $
1
2
2
ALL MODELS
PART NUMBER
QTY
OME920
N30
2
UNIT
PRICE $
2
REMARKS:
1
2
Page 49
SSANGYONG
MUSSO, SPORT UTILITY & KORANDO 1995 - 2005
FRONT
TORSION BARS
SHOCK ABSORBER
PART NUMBER
QTY
N65
2
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
UNIT
PRICE $
ALL MODELS
PART NUMBER
QTY
OME937
N118
2
UNIT
PRICE $
2
SUZUKI
GRAND VITARA 4 DOOR 08/2005 ON
FRONT
SPRING: TO 35 KGS
STRUT
PETROL V6 (2.7)
DIESEL (1.9)
PART NUMBER
QTY
1
OME623
TO BE DEVELOPED
2
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
PETROL 4 CYLINDER (2.0)
UNIT
PRICE $
ALL MODELS
PART NUMBER
QTY
1
OME625
TO BE DEVELOPED
2
PART NUMBER
QTY
1
OME624
TO BE DEVELOPED
2
UNIT
PRICE $
REMARKS:
UNIT
PRICE $
1 Springs are compatible with OE struts.
GRAND VITARA TO 2005
FRONT
SPRING: TO 35 KGS
STRUT
STRUT
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
4 & 6 CYLINDER ENGINES
PART NUMBER
QTY
OME959
N103S
2
OME962
N103S
2
UNIT
PRICE $
2
ALL MODELS
QTY
OME961
N105
2
Page 50
2
PART NUMBER
QTY
OME962
N103S
2
OME962
N103S
2
PART NUMBER
DIESEL ENGINE
UNIT
PRICE $
2
1
2
2
REMARKS:
UNIT
PRICE $
1 Coil Packer OMESJR10 can be used to
increase ride height.
SUZUKI
VITARA WAGON 1988 - 2005
V6 PETROL ENGINE
FRONT
PART NUMBER
QTY
OME950
N103S
2
OME959
N103S
2
SPRING: TO 35 KGS
STRUT
STRUT
REAR
UNIT
PRICE $
2
2
ALL MODELS
PART NUMBER
QTY
OME954
N105
2
OME955
N105
2
SPRING: LIGHT LOAD
SHOCK ABSORBER
SPRING: MEDIUM LOAD
SHOCK ABSORBER
UNIT
PRICE $
2
2
VITARA WAGON 1988 - 2005
FRONT
4 CYLINDER PETROL ENGINE
PART NUMBER
QTY
OME960
N103S
2
OME953
N103S
2
SPRING: TO 35 KGS
STRUT
STRUT
REAR
UNIT
PRICE $
2
2
ALL MODELS
PART NUMBER
QTY
OME954
N105
2
OME955
N105
2
SPRING: LIGHT LOAD
SHOCK ABSORBER
SPRING: MEDIUM LOAD
SHOCK ABSORBER
UNIT
PRICE $
2
2
VITARA SWB TO 2005
FRONT
SPRING: TO 35 KGS
STRUT
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
PART NUMBER
OME951
N103S
QTY
UNIT
PRICE $
2
1
2
ALL MODELS
PART NUMBER
OME952
N32
QTY
2
2
Page 51
2
REMARKS:
UNIT
PRICE $
1 Front strut has 40mm longer travel than
original equipment.
2 Rear shock has 50mm longer travel
than original equipment.
SUZUKI
XL7 WAGON 2001 - 2005
FRONT
STRUT
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
PETROL ENGINE
PART NUMBER
QTY
OME956
N173S
2
DIESEL ENGINE
UNIT
PRICE $
2
PART NUMBER
QTY
OME962
N173S
2
UNIT
PRICE $
2
ALL MODELS
PART NUMBER
QTY
OME968
N153
2
UNIT
PRICE $
2
JIMNY SN413
FRONT
SPRING: TO 35 KGS
SHOCK ABSORBER
SHOCK ABSORBER
REAR
SPRING:
SHOCK ABSORBER
TRIM PACKER
PART NUMBER
QTY
OME963
OME028
2
OME965
OME028
2
UNIT
PRICE $
2
2
ALL MODELS
PART NUMBER
OME966
OME967
QTY
1
OME029
OMESJR10
UNIT
PRICE $
2
2
REMARKS:
1
OME966 suits Japanese built models with a 20mm higher right hand side coil.
OME967 suits European built models with equal height coils.
Page 52
DIESEL ENGINE
PART NUMBER
QTY
OME965
OME028
2
OME969
OME028
2
2
2
UNIT
PRICE $
SUZUKI
SIERRA ALL LEAF SPRING MODELS (SJ413)
STD TRACK : 1984 - 1988
SJ50 SWB
SJ51 LWB
WIDE TRACK : 1988 - 1996
SJ70 SWB (also fits MG410)
SJ71 LWB (also fits MG410WT)
Note: MG410 & MG10WT are Indian built LWB models.
1.0 LITRE
FRONT
SPRING: TO 25 KGS
SHOCK ABSORBER
SHOCK ABSORBER
PART NUMBER
CS012FA / B
OME015
CS013FA / B
OME025
OMESB19
SPRING BUSH
FITTING KIT
TRIM PACKER
REAR
UNIT
PRICE $
PART NUMBER
CS012FA / B
OME025
1+1
2
5
CS013FA / B
OME025
1+1
2
2
Required
3
4
FK06
4
TP05
OMESD30
STEERING DAMPER
5
1
OMESB25
U BOLTS
QTY
1.3 LITRE
OMESB19
4
FK06
4
1
1
TP05
OMESD30
2
SHOCK ABSORBER
OME013
N43
CS039R
SHOCK ABSORBER
OME013
N43
TRIM PACKER
Required
TP05
UNIT
PRICE $
2
2
2
2
1
2
3
4
REMARKS:
1
OMESB19 bush kit fits all models except LJ50. OMESB25 bush kit only fits model LJ50.
2
OME013 fits all models except LJ80 and LJ80 II. N43 fits all LJ80 and LJ80 II models.
3
88 to '96 1300cc Wide Track Models:
D/S OMEU61 x 1, OMEU61B x 1
Front:
Rear: OMEU60 x 4
P/S OMEU60 x 2
84 to '88 1300cc STD Track Models:
Front:
Rear: OMEU62 x 4
P/S OMEU62 x 2
81 to '87 1000cc Models:
Front:
Rear: OMEU60 x 4
P/S OMEU60 x 2
4
FK06 kit required for model with OE stabiliser bar. Refer OME Technical & Fitting Manual.
5
IMPORTANT: Sierras used in extreme heavy off road use eg. Station mustering
must have CS013FA + B installed.
Page 53
2
1
CS038R
U BOLTS
1+1
3
SPRING: MEDIUM LOAD
OMESB25
2
5
Required
QTY
OMESB19
1+1
2
PART NUMBER
SPRING BUSH KIT
5
1
OMESB25
ALL MODELS
2
QTY
1
UNIT
PRICE $
SUZUKI
SANTANA SAMURAI TO 2004 SWB & LWB MODELS
FRONT
Estimated Lift:30 - 40mm
1.3 LITRE PETROL
PART NUMBER
QTY
SPRING: TO 25 KGS - 40mm
SHOCK ABSORBER
CS012FA / B
OME034
1+1
SHOCK ABSORBER
SPRING BUSH
U BOLTS
STEERING DAMPER
TRIM PACKER
CS013FA / B
OME034
OMESB19
OE
OMESD30
TP05
REAR
UNIT
PRICE $
2
1
2
1
SWB MODELS
PART NUMBER
QTY
SPRING: MEDIUM LOAD
CS038R
SHOCK ABSORBER
PART NUMBER
QTY
CS013FA / B
OME034
1+1
CS013FA / B
OME034
OMESB19
OE
OMESD30
TP05
1+1
2
2
3
1.9 LITRE DIESEL
2
1
1+1
2
2
4
1
2
3
LWB MODELS
UNIT
PRICE $
PART NUMBER
QTY
2
CS039R
2
OME035
2
OME035
CS039R
2
CS039R
SHOCK ABSORBER
SPRING BUSH KIT
U BOLTS
TRIM PACKER
OME035
OMESB19
OE
TP05
2
2
OME035
OMESB19
OE
TP05
2
2
4
2
2
2
2
REMARKS:
1
Fitment of XL Leaf D20XL is recommended for weight in excess of 26kg on diesel model & 75 kg on petrol model.
2
Front: LHS: OMEU60 x 2, RHS: OMEU61B x 2 Required when fitting CS013FA/B
Rear: OMEU60 x 4 Required when fitting CS039R.
3
OMESD30 can be fitted to models which have an OE Steering Damper.
4
Fitment of XL Leaf D21XL is recommended for LWB models with constant 100kg rear weight or OE hard top.
Page 54
UNIT
PRICE $
UNIT
PRICE $
TOYOTA
LANDCRUISER 200 SERIES WAGON
FRONT
Estimated Lift: As Below
SPRING: NO WEIGHT: 25mm LIFT
STRUT
STRUT
SPRING: N0 WEIGHT: 50mm LIFT
STRUT
STRUT
COIL PACKER
ALL V8 ENGINES
PART NUMBER
QTY
OME700
2
N208S
Estimated Lift: As Below
SPRING: MEDIUM LOAD: LESS 20mm
SHOCK ABSORBER
SPRING: MEDIUM LOAD: NO LIFT
SHOCK ABSORBER
SPRING: MEDIUM LOAD: 20mm LIFT
SHOCK ABSORBER
SPRING: CONSTANT 200 KGS: 20mm
SHOCK ABSORBER
SHOCK ABSORBER
SHOCK ABSORBER
TRIM PACKER
STONE GUARD KIT
2
OME701
N208S
OME702
N208S
1
1
2
2
2
2
OME703
N208S
OME95PF5
REAR
1
UNIT
PRICE $
1
2
2
2
ALL MODELS
PART NUMBER
QTY
OME720
2
N209
2
OME721
2
N209
2
OME722
2
N209
2
OME723
2
N210
2
OME724
2
N210
2
OME725
2
N210
2
UNIT
PRICE $
OME80PR05
OME80PR10
OME661
3
1
SELECTION HINTS:
The OME spring range has been developed to give owners the ability to reduce the very pronounced 75mm of rear to
front rake of the original Toyota suspension. By carefully matching the OME front and rear springs the rake can be
reduced to be between 20mm and 50mm.
NB: Where 20mm lift rear coils are selected they must be matched to 50mm lift front springs.
REMARKS:
1
OME Coils and N208S strut can only be installed together due to different winding of the lower coil end to suit the
N208S coil seat. They are not compatible with the OE Equipment.
2
To maintain ride height when front accessory weight exceed 100 KGS, OME95PF5 coil packer should be installed,
each OME95PF5 will increase ride height by 10mm.
3
OME661 lower shock stone guards are recommended fitment for protection against stone damage.
Page 55
TOYOTA
LANDCRUISER 100 SERIES
INDEPENDENT FRONT SUSPENSION
FRONT
PART NUMBER
303001
SHOCK ABSORBER
FITTING KIT
1
1
*N199 / N133 / N100
5
FK27
2
303002
REAR
1
PART NUMBER
QTY
OME860
*N200 / N101
2
OME863
*N200 / N101
2
OME864
N200
2
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
OME866
SPRING: MEDIUM LOAD
OME862
*N200 / N101
SHOCK ABSORBER
OME80PR05
TRIM PACKER
OME80PR10
OME661
STONE GUARD KIT
UNIT
PRICE $
ALL MODELS 10/2000 ON
SHOCK ABSORBER
REAR
QTY
UNIT
PRICE $
2
2
2
4
2
2
2
3
1
10/98 TO 2000 V8 MODELS
PART NUMBER
QTY
OME865
*N200 / N101
2
OME866
*N200 / N101
2
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
TRIM PACKER
STONE GUARD KIT
OME80PR05
OME80PR10
OME661
UNIT
PRICE $
2
2
2
3
1
REMARKS:
1
It is important that a minimum of 60mm of droop is maintained to prevent topping out of the front shock
absorbers. 303001 suits V8 models, 303002 suits Turbo Diesel models.
NB: In some Middle Eastern Countries, 6 cylinder Petrol LandCruiser 100 Series (IFS) use the longer
turbo diesel torsion bars.
2
Packers must be installed on top of coils.
3
OME661 or OME662 (suits 40mm diameter control arms) lower shock mount stone guard is recommended
fitment to rear shocks to protect against severe stone peppering encountered on loose road surfaces.
4
Original rear rake is 60mm approximately with OE coil rates of 145lbs/in or 25.5N/mm.
Customers wishing to lower the rear height but increase the load carrying ability can select from:
OME866 - Reduces OE height by 10mm (rates 240 - 300lbs/in, 42 - 52.5N/mm).
OME862 - Reduces OE height by 30mm (rates 240lbs/in, 42N/mm).
5
Due to the common problem of the lower control arm cracking when driven under hard conditions, the fitment
of a FK27 lower control arm reinforcing bracket kit is strongly recommended.
Page 56
TOYOTA
LANDCRUISER 105 SERIES & 80 SERIES WAGONS
LIVE AXLE FRONT SUSPENSION MODELS
FRONT
SPRING: TO 50 KGS - 50mm
SHOCK ABSORBER
SPRING: 51 TO 110 KG-50mm
SHOCK ABSORBER
SPRING: TO 110KG-10mm LIFT
SHOCK ABSORBER
TRIM PACKER
STEERING DAMPER
CASTER KIT
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
SHOCK ABSORBER
SHOCK ABSORBER
SPRING: MEDIUM 20mm LIFT
SHOCK ABSORBER
TRIM PACKER
STONE GUARD KIT
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
TRIM PACKER
STONE GUARD KIT
PART NUMBER
OME851
*N73 / N70
OME850
N73
OME861
N73
OME80PF05
OME80PF10
OMESD24
OMECA77B
QTY
1
UNIT
PRICE $
2
2
1
2
2
1
2
2
3
1
2
1
ALL MODELS
PART NUMBER
OME860
*N74E / N71E
OME863
N74E
OME864
N74E
OME868
N74E
OME862
*N74E / N71E
OME80PR05
OME80PR10
OME661
QTY
1
UNIT
PRICE $
2
2
1
2
2
1
2
2
1
2
2
1
2
2
3
4
1
LPG CONVERSION
PART NUMBER
OME860
*N74E / N71E
OME863
N74E
OME80PR05
OME80PR10
OME661
QTY
1
UNIT
PRICE $
2
2
1
2
2
3
4
1
REMARKS:
1
For models built from 8/91 add 20mm to lift height shown which is based on average for petrol and diesel
engines.
2
3
Packers must be installed on the top of Coil Springs.
4
OME662 or OME661 Lower shock mount stone guard is recommended fitment to protect against severe
stone peppering encountered on loose road surfaces. OME662 will only fit models with 40mm diameter control
arms.
Page 57
TOYOTA
PRADO 120 SERIES 4/2003 ON LWB & SWB
EXCEPT TEMS MODELS (ELECTRONICALLY MODULATED SUSPENSION)
FRONT
SPRING: TO 50 KGS
STRUT
STRUT
STRUT
TRIM PACKER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SPRING: 150KGS - 400KGS
PART NUMBER
OME883
N140S
OME884
*N201S / N140S
OME885
N201S
QTY
1
2
2
1
2
2
OME95PF5
LWB MODELS
PART NUMBER
OME895E
OME895
*N142 / N141
QTY
SWB MODELS
UNIT
PRICE $
PART NUMBER
QTY
2
3
2
OME895E
2
2
*N142 / N141
2
2
OME896
*N202 / N142
2
2
OME897
N202
2
1
OME661
2
SHOCK ABSORBER
OME897
N202
2
STONE GUARD KIT
OME661
2
2
1
OME896
*N202 / N142
SHOCK ABSORBER
UNIT
PRICE $
2
2
UNIT
PRICE $
2
2
2
2
2
1
REMARKS:
1
To maintain front strut droop it is important front coils are selected as shown.
2
OME661 lower shock mount stone guard is recommended fitment to rear shocks to protect against severe stone peppering
encountered on loose road surfaces.
3
OME895E suits LWB models without OE 2nd fuel tank. OME895 suits LWB models with OE 2nd fuel tank.
Page 58
TOYOTA
PRADO 90 SERIES TO 10/2002 LWB
FRONT
SPRING: TO 50 KGS
STRUT
STRUT
TRIM PACKER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
SHOCK ABSORBER
TRIM PACKER
STONE GUARD KIT
V6 PETROL ENGINES
PART NUMBER
OME880
N91S/N91SC
OME881
*N91SB / N91S
QTY
1
UNIT
PRICE $
OME881
N91S/N91SC
2
1
OME882
*N91SB / N91S
2
2
OME95PF5
SPRING: NO BAR
SPRING: BAR ONLY
STRUT
SPRING: BAR & WINCH
STRUT
SPRING: MEDIUM LOAD
SHOCK ABSORBER
XL LEAF
SPRING BUSH - BONDED RUBBER
U BOLTS
FITTING KIT
PART NUMBER
QTY
OME890
N86 / N86C
2
2
OME891
*N86B / N86
2
OME892
*N86B / N86
2
UNIT
PRICE $
2
2
1
2
2
To maintain front strut droop it is
important front coils are selected as
shown.
2
1
OME661 lower shock mount stone
guard is recommended fitment to rear
shocks to protect against severe stone
peppering encountered on loose road
surfaces.
2
2
2
2
OME80PF05
OME80PF10
OME661
1
PART NUMBER
QTY
OME612
N192S
2
OME614
N192S
2
OME613
N192S
2
PART NUMBER
QTY
CS055R
N193
2
D28XL
2
UNIT
PRICE $
2
2
2
UNIT
PRICE $
2
SUPPLIED WITH
SPRINGS
OMEU53B
FK32
OE
REMARKS:
1
2
4
1
1
REMARKS:
1
1
UNIT
PRICE $
ALL MODELS
REAR
QTY
OME95PF5
FRONT
STRUT
PART NUMBER
2
TUNDRA 2007 ON
DIESEL ENGINES
FK32: Brake Line and ABS Wire Bracket Relocation Kit is a mandatory fitment.
Page 59
TOYOTA
FJ CRUISER 2006 ON
FRONT
STRUT
SPRING: TO 60 KGS
STRUT
STRUT
TRIM PACKER
REAR
SPRING: LIGHT LOAD
SHOCK ABSORBER
SPRING: MEDIUM LOAD
SHOCK ABSORBER
PART NUMBER
QTY
OME884
N140S
2
OME885
N140S
2
OME886
N140S
2
UNIT
PRICE $
2
2
2
OME95PF5
ALL MODELS
PART NUMBER
QTY
OME895
N141
2
OME896
N141
2
PART NUMBER
QTY
OME883
*N167S / N166S
2
OME884
N167S
2
UNIT
PRICE $
2
2
FORTUNER 2004 ON
FRONT
SPRING: TO 75 KGS
STRUT
STRUT
TRIM PACKER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
UNIT
PRICE $
2
2
OME95PF5
ALL MODELS
PART NUMBER
QTY
OME802
N191
2
OME803
N191
2
Page 60
2
2
UNIT
PRICE $
TOYOTA
LANDCRUISER 76 SERIES WAGON
FRONT
SPRING: TO 60 KGS
SHOCK ABSORBER
SHOCK ABSORBER
STEERING DAMPER
CASTER KIT
REAR
V8 DIESEL ENGINES
PART NUMBER
QTY
OME856
N106
2
OME859
N181
2
OMESD47
OMECA77B
2
2
1
1
1
ALL MODELS
SPRING: MEDIUM
SHOCK ABSORBER
SHOCK ABSORBER
SPRING BUSH KIT
ANTI-INVERSION KIT
U BOLTS
UNIT
PRICE $
PART NUMBER
QTY
CS057R
*N197 / N75E
2
CS058R
N197
2
OMESB86
OMESB85
OMEGS19
2
2
2
2
3
1
OMEGP7
FK38
OMEU59D
UNIT
PRICE $
1
3
1
4
REMARKS:
1
OMECA77B caster kit will increase caster angle by 2o. Check manufacturer's specifications to
determine if required.
2
Be sure to select OME bush kits carefully:
OMESB85: Use for all models when installing OME Greasable Shackles & Pins.
OMESB86: Use when original shackles & pins are used.
3
To prevent springs from inverting it is mandatory that either OMEGS19 Greasable Shackle Kit or
FK38 Anti-Inversion Kit be installed.
Page 61
TOYOTA
LANDCRUISER 78 & 79 SERIES
FRONT
Estimated Lift:
6 Cylinder Models: 40mm
V8 Models: 50mm
SPRING: TO 50 KGS
SHOCK ABSORBER
SHOCK ABSORBER
STEERING DAMPER
CASTER KIT
PETROL & DIESEL
6 CYLINDER ENGINE
PART NUMBER
QTY
OME856
*N181/N106
2
OME859
N181
2
OMESD24
1
OMESD47
UNIT
PRICE $
2
2
4
1
TRIM PACKER
OMECA77B
OME79PF10
REAR
79 SERIES SINGLE CAB
Estimated Lift:
All Models: 45mm
SHOCK ABSORBER
SHOCK ABSORBER
SHOCK ABSORBER
SPRING BUSH KIT
U BOLTS
SWAY BAR BRACKET KIT
1
QTY
CS013R
*N75F / N75E
2
CS014R
N197
2
CS015R
N197
2
OMESB84
OMESB85
2
2
2
2
2
PART NUMBER
QTY
OME859
*N181/N106
2
OME853
N181
2
OMESD47
1
OMECA77B
OME79PF10
1
PART NUMBER
V8 DIESEL ENGINES
UNIT
PRICE $
2
2
1
1
78 SERIES TROOP CARRIER
PART NUMBER
QTY
CS013R
*N75F / N75E
2
CS014R
N197
2
CS015R
N197
2
OMESB86
OMESB85
2
2
2
2
2
OMEGS10
1
OMEGS19
1
OMEGP7
1
OMEGP7
1
OMEU59B
NOT REQUIRED
4
OMEU59B
FK34
4
3
REMARKS:
1
2
There is a difference between the shackles on Single Cab models and Troop Carrier models.
Be sure to select OME bush kits carefully:
OMESB84: Use for all single cab models when original shackles & pins are used.
OMESB85: Use for all models when installing OME greasable shackles & pins.
OMESB86: Use for Troop Carrier models when original shackles & pins are used.
3
FK34 Sway Bar Extension Bracket Kit must be installed to prevent damage to Sway Bar mounts, due to
increased suspension travel
4
OMESD24 suits pre 2007 models (open length 651mm).
OMESD47 suits 2007on models (open length 750mm).
Page 62
UNIT
PRICE $
1
UNIT
PRICE $
TOYOTA
LANDCRUISER 75 SERIES
FRONT
SPRING: TO 50 KGS
SHOCK ABSORBER
PETROL ENGINES
PART NUMBER
CS006F
*N88 / N92
QTY
1
UNIT
PRICE $
2
2
DIESEL ENGINES
PART NUMBER
QTY
CS006F
*N88 / N92
2
2
CS006F
*N50 / N88
2
CS007F
*N50 / N88
2
2
U BOLTS
OMEU51
4
OMEU51
4
SPRING BUSH KIT
OMESB1
2
OMESB1
2
OMEGS2
1
OMEGS2
1
1
1
OMEGP1
OMESD24
1
STEERING DAMPER
OMEGP1
OMESD24
ANTI INVERSION KIT
FK08
1
FK08
SHOCK ABSORBER
REAR
2
QTY
CS006R
*N75F / N75E
2
CS007R
N75F
2
CS008R
N75F
2
SHOCK ABSORBER
SPRING BUSH KIT
OMESB16
2
U BOLTS
OMEU59B
4
SPRING: MEDIUM LOAD
SHOCK ABSORBER
ANTI INVERSION KIT
1
2
1
ALL MODELS
PART NUMBER
SHOCK ABSORBER
2
OMEGS1
OMEGP2
FK08
UNIT
PRICE $
2
2
2
3
1
1
2
1
REMARKS:
1
Vehicles with no front accessory weight will require the removal of the 4th leaf from the top of the spring stack.
This is to maintain good shackle angle by not allowing the bump stop measurement to exceed 100mm.
2
Shackles: FK08 anti inversion kit is mandatory fitment front and rear if greasable shackles are not fitted.
Note: Spring Caster Wedge OMECW2 (2o Caster Wedges) may be required to restore positive caster angle.
Front end alignment check will indicate required adjustment.
3
There can be 2 spigot sizes in the rear fixed end pins on 75 Series LandCruisers.
Check for correct size before ordering greasable pins. Part numbers are:
50mm spigot = OMEGP2.
51mm spigot = OMEGP4.
Page 63
UNIT
PRICE $
TOYOTA
LANDCRUISER HZJ71 & HZJ74 SWB & MWB
FRONT
SPRING: TO 50 KGS
SHOCK ABSORBER
SHOCK ABSORBER
STEERING DAMPER
CASTER KIT
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
DIESEL 4.2 ENGINES
PART NUMBER
QTY
OME856
*N106 / N106C
2
OME859
N106
2
OMESD24
OMECA77B
UNIT
PRICE $
2
2
1
1
1
ALL MODELS
PART NUMBER
CS017RB
N68
SHOCK ABSORBER
CS004RB
N75
SPRING BUSH KIT
OMESB93
U BOLTS
OMEU59A
OMEGS10
OMEGP7
QTY
2
UNIT
PRICE $
2
2
2
2
2
3
2
4
3
1
1
REMARKS:
1
2
If rear bump stop measurements exceed 150mm remove 3rd leaf.
3
OME greasable shackles OMEGS10 & OMEGP7 are mandatory fitment. OE shackles cannot be used.
LANDCRUISER II LJ / RJ70
FRONT
SPRING: TO 50 KGS
SHOCK ABSORBER
SHOCK ABSORBER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
PART NUMBER
QTY
OME872
N77
2
OME874
*N77B / N77
2
UNIT
PRICE $
2
2
ALL MODELS
PART NUMBER
QTY
OME873
N79
2
OME875
*N79B / N79
2
Page 64
2
2
UNIT
PRICE $
TOYOTA
BUNDERA RJ70
FRONT
SPRING: TO 50 KGS
SHOCK ABSORBER
SHOCK ABSORBER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
PART NUMBER
QTY
OME870
N114
2
OME876
N114
2
UNIT
PRICE $
2
2
ALL MODELS
PART NUMBER
QTY
OME871
2
N112
N113
1
1
UNIT
PRICE $
REMARKS:
1
N112 fits left hand side.
N113 fits right hand side.
1
LANDCRUISER 70, 73, 74 SERIES SWB & MWB
FRONT
SPRING: TO 50 KGS
SHOCK ABSORBER
PART NUMBER
CS006F
*N88 / N92
QTY
1
2
2
2
SHOCK ABSORBER
CS006F
N88
SPRING BUSH KIT
OMESB1
2
U BOLTS
OMEU51
4
OMEGS2
1
OMEGP1
1
STEERING DAMPER
ANTI INVERSION KIT
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
OMESD24
FK08
2
1
3
1
ALL MODELS
PART NUMBER
QTY
CS017RA / B
N85
1+1
SHOCK ABSORBER
SPRING BUSH KIT
OMESB1
2
OMEU59A
4
ANTI INVERSION KIT
2
1+1
2
OMEGS2
GSP01
FK08
UNIT
PRICE $
2
CS004RA / B
N85
U BOLTS
UNIT
PRICE $
1
4
1
3
1
REMARKS:
1
Vehicles with no front accessory weight will require the removal of the 4th leaf from the top of the spring stack.
2
If bump stop measurement exceeds 150 - 160mm remove 3rd leaf from top of spring stack
to prevent shock absorber from topping out.
3
Shackles: FK08 anti inversion kit is mandatory fitment front and rear if greasable shackles are not fitted.
Note: Spring Caster Wedge OMECW2 (2o Caster Wedges) may be required to restore positive caster angle.
Front end alignment check will indicate required adjustment.
4
There can be 2 spigot sizes of the rear fixed end pins. Check spigot size before ordering greasable pins.
50mm spigot = OMEGP2 51mm spigot = OMEGP4
Page 65
TOYOTA
LANDCRUISER 60, 61 & 62 SERIES
FRONT
SPRING: TO 50 KGS
SHOCK ABSORBER
PETROL ENGINES
PART NUMBER
QTY
CS003F
*N88 / N92
2
CS004F
N88
SPRING BUSH KIT
OMESB1
U BOLTS
OMEU51
2
FK01
3
STEERING DAMPER
ANTI INVERSION KIT
REAR
SPRING: RIDE/LIGHT LOAD
SHOCK ABSORBER
SPRING: MEDIUM LOAD
SHOCK ABSORBER
FITTING KIT
SHOCK ABSORBER
FITTING KIT
SPRING BUSH KIT
U BOLTS
ANTI INVERSION KIT
1
PART NUMBER
CS004F
*N50 / N88
2
SHOCK ABSORBER
FITTING KIT
UNIT
PRICE $
DIESEL ENGINES
QTY
1
2
2
2
CS005F
N50
2
OMESB1
4
OMEU51
2
4
3
1
2
1
2
2
2
1
FK01
OMEGS2
1
OMEGS2
1
OMEGP1
1
OMEGP1
1
1
OMESD24
FK08
OMESD24
FK08
6
1
1
6
1
ALL MODELS
PART NUMBER
QTY
CS017RA / B
5
1+1
N94
N95
4
2
CS004RA /B
5
1+1
4
2
FK0422
FK0411
3
1
CS005RA / B
5
1+1
4
2
3
1
*N90 / N85
*N42 / N89
N90
N42
FK0418
OMESB1
OMEU59B
2
2
OMEGS1
OMEGP1
FK08
UNIT
PRICE $
4
1
1
6
1
REMARKS:
1
Vehicles with no front accessory weight may require the removal of the 4th leaf from the top of the spring stack.
OMECW2 spring caster wedge may be required to restore positive caster angle.
2
Compare original spring stack to OME spring stack to determine U bolt requirement.
3
Front: FK01 not required if OE U bolts are replaced with OMEU51.
Rear: Fitting Kit FK0418 is only required on vehicles with rubber insulators around rear springs.
Refer OME Technical & Fitting Manual Section 7 GFI: LandCruiser 60 Series page 7 selection chart.
4
Post 1986 vehicles have 19mm mounting pin and accept shock part no's N94, N90 & N85.
Pre 1986 vehicles have 16mm mounting pin and accept shock part no's N95, N42 & N89.
5
Barn door models may require A/A or B/B spring fitment.
6
Shackles: FK08 anti inversion kit is mandatory fitment if greasable shackles are not fitted.
Page 66
UNIT
PRICE $
TOYOTA
LANDCRUISER 45, 47 SERIES ALL LWB MODELS
FRONT
PART NUMBER
QTY
CS001F
N81
2
CS002F
*N41 / N81
2
SPRING: TO 50 KGS
SHOCK ABSORBER
SHOCK ABSORBER
SPRING BUSH KIT
U BOLTS - 25mm Eye Spring
UNIT
PRICE $
2
2
See Chart
Below
2
OMEU59A
3
OMEU59B
1
OMEU59A
3
OMEU55
1
REMARKS:
1
FK08 anti inversion kit is mandatory
fitment front and rear if greasable
shackles are not fitted
2
Remove 3rd leaf from CS003R spring
stack to reduce spring rate for light duty
application.
See Chart Below
STEERING DAMPER
OMESD23
FK08
ANTI INVERSION KIT
REAR
1
1
1
ALL MODELS
PART NUMBER
SPRING: MEDIUM LOAD
CS003R
N42
SHOCK ABSORBER
QTY
2
2
2
CS003R
N42
SHOCK ABSORBER
2
2
See Chart
SPRING BUSH KIT
2
Below
U BOLTS
OMEU59B
TRIM PACKER
UNIT
PRICE $
4
TP02
See Chart Below
ANTI INVERSION KIT
FK08
1
1
GREASABLE SHACKLES
KIT PART
NO.
QTY.
18mm Shackle Pins & 35mm
Hanger Bracket
OMEGS2
1
OMEGP1
1
Hanger Bracket
OMEGS8
1
OMEGP8
1
18mm Shackle Pins & 30mm OMEGS17
Hanger Bracket
*GSP02
2
OMEGS9
1
OMEGP8
1
FRONT
UNIT
PRICE $
Compatible Bush Kit
QTY.
OMESB1
OMESB1
2
OMESB30
OMESB30
2
2
2
REAR
Hanger Bracket
OMESB79
OMESB79
1
OMESB30
OMESB30
* GSP02 is only a greasable pin replacement for Original Pin
Page 67
2
2
2
2
UNIT
PRICE $
TOYOTA
LANDCRUISER 40, 42 SERIES SWB
FRONT
SPRING: TO 50 KGS
SHOCK ABSORBER
SHOCK ABSORBER
PART NUMBER
QTY
CS001F
N81
2
CS002F
N41
2
OMESB30
SPRING BUSH KIT
OMESB1
UNIT
PRICE $
2
2
1
2
OMEU59A
3
OMEU59B
1
OMEU59A
3
OMEU55
1
See Chart Below
STEERING DAMPER
OMESD23
FK08
ANTI INVERSION KIT
REAR
1
2
1
ALL MODELS
PART NUMBER
QTY
CS001R
*N89 / N95
2
SHOCK ABSORBER
CS002R
2
SHOCK ABSORBER
N89
OMEU59A
2
SPRING: MEDIUM LOAD
U BOLTS
OMESB30
SPRING BUSH KIT
OMESB1
UNIT
PRICE $
2
4
1
2
2
1
See Chart Below
ANTI INVERSION KIT
FK08
REMARKS:
1
OMESB30 suits 35mm spring eye and 25mm hanger bracket with 15mm shackle pin hole.
OMESB1 suits 35mm spring eye and hanger bracket with 18mm shackle pin hole.
2
FK08 anti inversion kit is mandatory fitment front and rear if greasable shackles are not fitted.
GREASABLE SHACKLES
FRONT
QTY.
UNIT
PRICE $
REAR
QTY.
18mm Shackle OMEGS2
Pin
OMEGP1
1
OMEGS1
1
1
OMEGP1
1
15mm Shackle OMEGS8
Pin
OMEGP8
1
OMEGS9
1
1
OMEGP8
1
Page 68
UNIT
PRICE $
Compatible
Bush Kit 1
OMESB1
OMESB30
UNIT
PRICE $
TOYOTA
TACOMA V6 10/2004 ON
FRONT
SPRING: TO 50 KGS
STRUT
STRUT
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
U BOLT
SPRING BUSH KIT
DRIVESHAFT SPACER KIT
PART NUMBER
QTY
OME885
N140S
2
OME886
N140S
2
UNIT
PRICE $
2
2
ALL MODELS
PART NUMBER
QTY
CS047R
2
N182
2
OMEU53A
4
USE OE
FK29
1
UNIT
PRICE $
TACOMA V6 & 4 CYLINDER 1998 - 2004
FRONT
SPRING: TO 50 KGS
STRUT
STRUT
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SPRING BUSH KIT
EXHAUST BRACKET KIT
PART NUMBER
QTY
OME880
N91SC
2
OME881
N91S
2
UNIT
PRICE $
2
2
ALL MODELS
PART NUMBER
QTY
CS046RA / B
1+1
N85
2
OMESB88
OMESB89
OMEGS12
FK21
1
2
1
1
2
1
UNIT
PRICE $
REMARKS:
1
OMESB88 must be used with OMEGS12 greasable shackles.
OMESB89 must be used with original shackles.
2
FK21 exhaust bracket is mandatory fitment to ensure exhaust system clears springs.
Page 69
TOYOTA
HILUX/VIGO 2005 ON ALL MODELS
FRONT
SPRING: TO 75 KGS
STRUT
STRUT
TRIM PACKER
REAR
ALL ENGINES
PART NUMBER
OME883
*N167S / N166S
OME884
N167S
QTY
1
2
OME95PF5
ALL MODELS
2
CS043R
N168
2
CS044R
*N169 / N168
2
2
SHOCK ABSORBER
CS045R
N169
SPRING BUSH KIT
OMESB98
2
U BOLTS
OMEU53A
OMEGS14
4
SPRING: LIGHT LOAD
SPRING: MEDIUM LOAD
SHOCK ABSORBER
To maintain coil clearance from the
Sway Bar, the coil seat must be
installed with the helix facing away from
the Sway Bar.
2
CS043R-15
N168
SHOCK ABSORBER
1
2
1
QTY
SPRING: LOW LIFT 20mm
UNIT
PRICE $
2
PART NUMBER
SHOCK ABSORBER
REMARKS:
UNIT
PRICE $
2
2
2
2
1
HILUX/TIGER 1997 - 2004 ALL MODELS
FRONT
PART NUMBER
SHOCK ABSORBER
STEERING DAMPER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
303003
QTY
2
*N87 / N80
OMESD33
1
2
1
ALL MODELS
PART NUMBER
CS018R
N68 + N68E
QTY
1+1
CS019R
2
*N75 + N75E
N68 + N68E
1+1
3
1+1
SHOCK ABSORBER
CS021R
N75 + N75E
3
1+1
SPRING BUSH KIT
OMESB43
OMEGS7
ANTI INVERSION KIT
FITTING KIT
FK15
FK01
UNIT
PRICE $
2
Raise or lower front end clearance and
trim vehicle by adjusting front torsion
bars.
3
N75E and N68E are longer in length
and must be fitted to right hand side
only. Fitment to left hand side may
cause damage to shock absorber and
vehicle.
4
Mandatory Fitment: Either OMEGS7 of
FK15 anti inversion kit must be fitted to
prevent possible spring inversion.
5
Fitment of FK01 spacer washers to U
Bolts is required to ensure correct
tension is obtained on U bolts.
1+1
3
REMARKS:
2
3
CS020R
N75 + N75E
SHOCK ABSORBER
UNIT
PRICE $
2
2
2
4
1
1
5
Page 70
1
TOYOTA
HILUX & 4 RUNNER PRE 1997 ALL LEAF SPRING MODELS
FRONT
SPRING: TO 50 KGS
SHOCK ABSORBER
PETROL ENGINES
PART NUMBER
CS008FA / B
N84
QTY
1
CS009FA / B
*N93 / N84
SPRING BUSH KIT
OMESB5
U BOLT
OMEU52
3
FK03
2
STEERING DAMPER
REAR
1
1
1+1
2
CS009FA / B
N93
2
OMESB5
1
OMEU52
3
1
2
2
1
1+1
2
2
1
FK10
OMEGS4
1
OMEGS4
1
OMEGP3
OMESD21
1
OMEGP3
OMESD21
1
1
ALL MODELS
PART NUMBER
QTY
CS009R
7
2
SHOCK ABSORBER
*N85 / N94
*N89 / N95
5
2
CS010R
7
2
N85
N89
5
2
U BOLTS
OMEU53
4
SPRING BUSH KIT
OMESB6
2
OMEGS3
1
QTY
2
1+1
SPRING: MEDIUM LOAD
SHOCK ABSORBER
PART NUMBER
CS009FA / B
*N93 / N84
1+1
2
SHOCK ABSORBER
FITTING KIT
UNIT
PRICE $
DIESEL ENGINES
OMEGP3
UNIT
PRICE $
1
TRIM PACKER
TP04
4
ANTI INVERSION KIT
FK09
FK13
6
1
REMARKS:
1
A/A spring fitment may be needed on some vehicles for trimming purposes.
2
Petrol HiLux may require an FK03 (saddle correction plates) if the spring seats are distorted.
FK10 must be fitted to all Diesel & Petrol models used off road. Refer OME Technical & Fitting Manual.
3
OMEU52 is required when fitting OME springs to stop the U bolt contacting the drag link.
4
A trim packer may be required to trim vehicle. Only to be used on rear springs.
5
Shock selection *N89 / N95 for medium and N89 for heavy applications applies to vehicles up to 1984 due
to a 16mm eye and shorter open and closed lengths. Post 1984 vehicles with 19mm eye use *N85 / N94 for
medium applications and N85 for heavy applications.
6
If greasable shackles are not fitted anti inversion kits must be fitted.
FK09 fits all pre 1984 models.
FK13 fits all 1985 models on.
7
To provide correct shackle angle, 1985 - 89 automatic 4 Runner models require the 3rd leaf to be removed to
reduce spring rate.
Page 71
1
UNIT
PRICE $
TOYOTA
HILUX PRE 1997 EXTRA CAB & DUAL CAB SR5
IFS & REAR LEAF MODELS
FRONT
PART NUMBER
TORSION BARS: 50 KGS
SHOCK ABSORBER
STEERING DAMPER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
SPRING BUSH KIT
U BOLTS
303003
QTY
1
N98
OMESD33
UNIT
PRICE $
1
2
1
ALL MODELS
PART NUMBER
QTY
CS019R
*N85 / N94
2
CS020R
*N85 / N94
2
OMESB43
OMEU53B
UNIT
PRICE $
2
2
2
2
4
REMARKS:
1
2
Compare original spring stack height to OME spring stack to decide whether
OMEU53 or OMEU53B U bolts are required.
4 RUNNER 2003 ON
FRONT
Estimated Lift: 25-50mm
SPRING: NO BAR
SHOCK ABSORBER
SPRING: TO 75 KGS
SHOCK ABSORBER
TRIM PACKER
PART NUMBER
OME884
N140S
OME885
N140S
QTY
1
UNIT
PRICE $
2
2
1
2
2
OME95PF5
REAR
PART NUMBER
QTY
OME895
N141
2
OME896
N142
2
2
SHOCK ABSORBER
OME897
N142
STONE GUARD KIT
OME661
1
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
UNIT
PRICE $
2
2
2
REMARKS:
1
OME front coils can only be installed with OME Nitrocharger strut and coil seats.
Page 72
TOYOTA
4 RUNNER 1990 - 1996
IFS REAR COIL SPRING MODELS
FRONT
PART NUMBER
SHOCK ABSORBER
STEERING DAMPER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
303003
QTY
1
N98
OMESD33
UNIT
PRICE $
1
2
1
ALL MODELS
PART NUMBER
QTY
OME900
N72F
2
OME901
N72F
2
UNIT
PRICE $
2
2
REMARKS:
1
4 RUNNER 1986 - 1990
IFS REAR LEAF SPRING MODELS
FRONT
PART NUMBER
SHOCK ABSORBER
STEERING DAMPER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
SPRING BUSH KIT
303003
QTY
1
N98
OMESD33
UNIT
PRICE $
1
2
1
ALL MODELS
PART NUMBER
CS009R
*N85 / N94
CS010R
N85
QTY
3
OMEU53B
OMEGS3
OMEGP3
2
2
3
2
2
OMESB6
U BOLTS
UNIT
PRICE $
2
2
4
1
1
REMARKS:
1
2
Compare original spring stack height to OME spring stack to decide whether
OMEU53 or OMEU53B U bolts are required.
3
Install OE caster wedges from OE spring stack onto OME springs.
Ensure wedges are fitted as per original position.
Page 73
SPECIFICATIONS
ADDING AN EXTRA LEAF
Part No.
Required Centre Bolt
OME Part Number
To Suit Dakar Spring No.
To Suit OME Spring No.
D1XL
UCB3
11XL
CS003F & CS004F
OME110 & OME11
D2XL
UCB2
113A/BXL
CSOO4RA/B & CS005RA/B
OME131A/B & OME1131A/B
D3XL
UCB8
13XL
CS001F &CS002F
OME13 & OME131
D4XL
UCB8
14XL
CS001R & CS002R
OME14 & OME141
D5XL
UCB6
17XL
CS009R & CS010R
OME17 & OME171
D6XL
UCB6
18XL
CS019R & CS020R
OME18 & OME181
D7XL
UCB5
19XL
CS040R
OME19
D8XL
UCB4
201XL
CS003R
OME201
OME26 & OME261
D9XL
UCB17
26XL
CS026R & CS027R
D10XL
UCB5
36XL
CS042R
OME36
D11XL
UCB5
3A/BXL
CS010FA/B
OME3A/B
D12XL
UCB1
4XL
CS011R & CS012R
OME4 & OME41
D13XL
UCB6
-
CS043R & CS044R & CS045R
-
D14XL
UCB17
49XL
CS013R & CS014R
OME491 & OME492
D15XL
UCB1
6XL
CS016RA/B
OME61A/B
D16XL
UCB5
67XL
CS006F
OME67
D17XL
UCB7
9A/BXL
CS008FA/B & CS009FA/B
OME99A/B & OME91A/B
D18XL
UCB14
NNXL
CS030R & CS031R & CS032R
OMENN1 & OMENN11
D19XL
UCB16
RODXL
CS028R & CS029R
OMEROD11
D20XL
UCB7
S1A/BXL
CS012FA/B
OMES1A/B
D21XL
UCB7
S2AXL
CS038R
OMES2
D22XL
UCB8
JCXL
CS034RA/B & CS035RA/B
OMEJC1A/B & OMEJC2A/B
D23XL
UCB9
J1FXL
CS014F
OMEJ1F
D24XL
UCB9
J1RXL
CS036R
OMEJ1R
D25XL
UCB4
39XL
CS006R & CS007R
OME391 & OME3911
D26XL
UCB15
ROD4XL
CS024R & CS025R
OMEROD4
D27XL
UCB19
-
CS048R
-
-
D28XL
-
D29XL
UCB17
-
CS047R
-
D30XL
UCB17
-
CS016F
-
D31XL
UCB19
-
CS050R
-
D32XL
UCB10
-
CS053R
-
D34XL
-
-
CS049R & CS056R
-
D35XL
-
-
CS057R & CS058R
-
* FK01 U Bolt Thread Spacer Kit required on all Cab Chassis models
REMOVING A LEAF:
In general terms, to reduce a spring's rate remove the third leaf from the top of the spring.
Except if the third leaf is fitted with a spring clip, in this case remove the fourth leaf.
Page 74
SPECIFICATIONS
REPLACEMENT MAIN & SECOND LEAF
DAKAR PART NUMBER
OME SPRING PART NUMBER
MAIN LEAF
PART NUMBER
SECOND LEAF
PART NUMBER
CS001F, CS002F
FRONT SPRINGS
40 SERIES - OME13, OME131
SL1F/1
SL1F/2
CS003F, CS004F, CS005F
60 SERIES - OME110, OME11, OME111
SL3F/1
SL3F/2
CS006F, CS007F
SL6F/1
SL6F/2
CS008FA
HILUX - OME99A
SL8FA/1
SL8FA/2
CS008FB
HILUX - OME99B
SL8FB/1
SL8FB/2
CS009FA
HILUX - OME91A
SL9FA/1
SL9FA/2
CS009FB
HILUX - OME91B
SL9FB/1
SL9FB/2
CS010FA, CS011FA
PATROL M60 - OME3A, OME31A
SL10FA/1
SL10FA/2
CS010FB, CS011FB
PATROL M60 - OME3B, OME31B
SL10FB/1
SL10FB/2
CS012FA, CS013FA
SUZUKI SIERRA - OMES1A
SL12FA/1
SL12FA/2
CS012FB, CS013FB
SUZUKI SIERRA - OMES1B
SL12FB/1
SL12FB/2
CS014F
JEEP YJ - OMEJ1F
SL14F/1
SL14F/2
REAR SPRINGS
CS001R, CS002R
SL1R/1
SL1R/2
CS003R
45 SERIES - OME201
SL3R/1
SL3R/2
CS004RA, CS005RA
60 SERIES - OME113A, OME1131A
SL4RA/1
SL4RA/2
CS004RB, CS005RB
60 SERIES - OME113B, OME1131B
SL4RB/1
SL4RB/2
CS006R, CS007R, CS008R
75 SERIES - OME39, OME391, OME3911, OME39111
SL6R/1
SL6R/2
CS009R, CS010R
HILUX - OME17, OME171, OME1711
SL9R/1
SL9R/2
CS011R, CS012R
PATROL M60 - OME4, OME41
SL11R/1
SL11R/2
78/79 SERIES - OME49, OME491, OME492, OME493
SL13R/1
SL13R/2
CS016RA
PATROL Y60, Y61 CAB CHASSIS - OME61A, OME611A
SL16RA/1
SL16RA/2
CS016RB
PATROL Y60, Y61 CAB CHASSIS - OME61B, OME611B
SL16RB/1
SL16RB/2
CS017RA
HJ60 - OME221A
SL17RA/1
SL17RA/2
CS017RB
HJ60 - OME221B
SL17RB/1
SL17RB/2
CS018R, CS019R, CS020R, CS021R
HILUX - OME180, OME18, OME181, OME1811
SL18R/1
SL18R/2
CS022R, CS023R
TRITON / PAJERO - OME22, OME222
SL22R/1
SL22R/2
CS024R, CS025R
ISUZU / RODEO 2003 - OMEROD4, OMEROD5
SL24R/1
SL24R/2
CS026R, CS027R
MAZDA / FORD UTE - OME26, OME261
SL26R/1
SL26R/2
CS028R, CS029R
ISUZU / RODEO - OMEROD1, OMEROD11, OMEROD111
SL28R/1
SL28R/2
NAVARA D21, D22 - OMENN1, OMENN11, OMENN2
SL30R/1
SL30R/2
CS033RA
JEEP XJ - 75mm
SL33RA/1
SL33RA/2
CS033RB
JEEP XJ - 75mm
SL33RB/1
SL33RB/2
CS034RA, CS035RA
JEEP XJ - OMEJC1A, OMEJC2A
SL34RA/1
SL34RA/2
CS034RB, CS035RB
JEEP XJ - OMEJC1B, OMEJC2B
SL34RB/1
SL34RB/2
CS036R, CS037R
JEEP YJ - OMEJ1R, OMEJ2R
SL36R/1
SL36R/2
CS038R, CS039R
SUZUKI SIERRA - OMES2, OMES21
SL38R/1
SL38R/2
SL40R/2
CS040R, CS041R
MITSUBISHI CHALLENGER - OME19, OME191
SL40R/1
CS042R
FORD EXPLORER - OME36
SL42R/1
SL42R/2
HILUX 2005ON
SL43R/1
SL43R/2
Page 75
SPECIFICATIONS
REPLACEMENT CENTRE BOLTS
Dimension Details
Centre Bolt Head
Part No. Diameter
Head
Depth
Shank
Length
Shank
Diameter
Thread
Length
A
B
C
D
E
UCB 1
17
10
90
9.5
50
3/8 UNF
UCB 2
15
15
90
9.5
50
3/8 UNF
CS017R
UCB 3
14
11
70
9.5
50
3/8 UNF
CS003F, 04F, 05F
UCB 4
14
8
110
9.5
50
3/8 UNF
CS03R, 04R, 05R, 06R, 07R
UCB 5
14
8
70
9.5
50
3/8 UNF
CS006,07F,10F,11F,22R,23R,40R,41R,42R,53R,54R
UCB 6
14
8
80
7.9
50
UCB 7
14
5
55
7.9
35
5/16 UNF CS009R, 10R, 18R, 19R, 20R, 21R
5/16 UNF CS008F, 09F, 12F, 13F, 38R, 39R
UCB 8
12
9
75
7.9
50
UCB 9
13
10
55
7.9
40
UCB 10
14
8
120
9.5
40
5/16 UNF CS001F, 02F, 01R, 02R, 33R, 34R, 35R
5/16 UNF CS014F, 36R, 37R
3/8 UNF CS008R, 48R
UCB 11
17
10
115
9.5
40
3/8 UNF
UCB 12
11
8
70
7.9
40
UCB 13
14
6
70
9.5
40
5/16 UNF CS028R
3/8 UNF CS030R, 31R, 32R
UCB 14
14
6
80
9.5
40
UCB 15
11.5
9
72
7.9
30
UCB 16
11
8
80
7.9
40
3/8 UNF CS043R, 43R-15, 44R, 45R, 46R
5/16 UNF CS024R, 25R
5/16 UNF CS029R
UCB 17
14
8
90
9.5
50
3/8 UNF
UCB 18
16
8
50
10
30
M10
CS015F
UCB 19
14
8
95
10
45
M10
CS018R, 49R, 50R, 51R, 56R
UCB 20
16
8
62
10
45
M10
CS018F
Page 76
Thread
Spring Part No.
CS011R, 12R
CS016R
CS013R,14R,15R,26R,27R,47R
SPECIFICATIONS
U BOLTS
OE spring stack height must be compared to OME spring before final
U Bolt selection as OE spring stack heights may vary from model to model.
PART NO.
OMEU51
OMEU52
OMEU53
OMEU53A
OMEU53B
OMEU54
OMEU55
OMEU56
OMEU57
OMEU58
OMEU58B
OMEU59A
OMEU59B
OMEU59C
OMEU59D
OMEU60
OMEU61
OMEU61B
OMEU62
OMEU63
OMEU64
OMEU65
OMEU66
OMEU67
OMEU68
OMEU69
OMEU69A
OMEU70
OMEU70A
OMEU71
A
LEG
LENGTH
mm
210
200
168
185
200
175
218
100
190
210
242
197
225
240
197
150
147
160
145
190
260
215
190
350
275
235
260
205
230
150
B
LEG
CENTRE
mm
85
76
75
75
75
85
97
75
88
110
110
97
97
97
97
81
87
87
73
74
125
97
103
107
107
95
95
95
95
82
C
THREAD
DIA
mm
14
14
14
14
14
12
14
12
12
14
14
14
14
14
14
11
10
10
10
12
14
14
14
16
16
14
14
14
14
12
D
THREAD
LENGTH
mm
70
75
70
65
70
70
70
50
70
75
75
75
75
75
90
70
60
70
70
50
90
75
60
75
75
65
65
55
55
60
Page 77
THREAD
PITCH
E
TOP
TYPE
1.5
1.5
1.5
1.5
1.5
1.25
1.5
1.25
1.25
1.5
1.5
1.5
1.5
1.5
1.5
1.27
1.25
1.25
1.25
1.25
1.5
1.5
1.5
2.0
2.0
2.0
2.0
2.0
2.0
1.5
SQUARE
FLAT
SQUARE
SQUARE
SQUARE
ROUND
SQUARE
SQUARE
ROUND
ROUND
ROUND
ROUND
ROUND
ROUND
ROUND
ROUND
ROUND
ROUND
ROUND
SQUARE
ROUND
ROUND
ROUND
ROUND
ROUND
ROUND
ROUND
SQUARE
SQUARE
SQUARE
REC.
TORQUE
Lbs.ft.
93
93
93
93
93
58
93
58
58
93
93
93
93
93
93
45
34
34
34
58
93
93
93
145
145
93
93
93
93
58
REC.
TORQUE
Nm
126
126
126
126
126
79
126
79
79
126
126
126
126
126
126
61
45
45
45
79
126
126
126
197
197
126
126
126
126
79
SPECIFICATIONS
SUSPENSION FITTING KITS
Part No.
Contains
Vehicle
Position
Refer to:
FK01
16 Flat Washers
60 Series
Front
Manual Sec. 4 GFI - Front suspension installation
FK03
2 Saddle Correction Plates
HiLux Petrol
Front
FK0411
4 x Retainer Spacers 11mm
60 Series
Rear
Manual Sec. 4 GFI
FK0418
60 Series
Rear
Manual Sec. 4 GFI
FK0422
60 Series
Rear
Manual Sec. 4 GFI - Rear suspension installation
FK0429
60 Series
Rear
FK047
60 Series
Rear
FK06
2 x Stabiliser Bar Packers 3mm
Suzuki
Front
FK08
2 x Anti-Inversion Plates
60,75 Series
Front
Manual Sec. 8 Technical - Shackle Modification
All 40 & 70 Series
&
GQ, Maverick ute & c/c
Rear
FK09
All HiLux
Rear
Manual Sec. 8 Technical - Shackle Modification
FK10
2 x Short Gussett Plates
HiLux
Front
Manual Sec. 8 Technical - HiLux Front Springs
2 x Long Gussett Plates
All models
FK13
2 x Anti-Inversion Side Plates
All HiLux
Rear
Manual Sec. 4 GFI
FK14
Isuzu 1 Tonne P/Up
Rear
Fitting instructions supplied with kit
FK15
2 x Ani-Inversion Side Plates
1997on HiLux
Rear
FK16
2 x 20mm Bump Stop Spacers
Wrangler TJ
Rear
FK18
2 x Brackets
GU Patrol
Rear
3 x Bolts
Sway Bar
3 x Washers
3 x Nuts
FK19
4 x Spacer Plates
LandCruiser
Front
4 x 35mm Bolts
78 & 79 Models
Sway Bar
6 x Spacer Plates
Land Rover Discovery
Front
8 x Bolts M8 X 1.25 X 35mm
199 on Models
Cross
4 x Spring Washers
FK20
8 x Flat Washers
FK21
Member
1 x Bracket
Toyota
Rear
2 x Bolts M8
Tacoma
Exhaust
2 x Flat Washers
Bracket
2 x Hex Nuts
FK22
2 x Shock Tower Support
Mazda/Ford
2 x Captive Nuts
1 tonne Pickup
Front
Fitting instructions
Front
4 x M10 x 1.5 x 30mm Bolt
4 x Washers Flat
4 x Washers Spring
FK23
1 x Strut Adaptor
Toyota / RAV 4
1998 to 2000
FK24
2 x Brackets
Nissan Y61
Rear
6 x Bolts
with Stabiliser
Sway Bar
11 X Washers Flat
Bar Release
6 x Nuts Nyloc
FK25
2 x Spacer Blocks
Nissan Y61
4 x Bolts
Oil Pan Kit
Front
4 x Washers Flat
4 x Washers Spring
FK26
2 x Side Plates
Isuzu / Rodeo 2003 on
Rear
FK27
2 x Support Brackets
Land Cruiser
Torsion Bar
100 Series
Locating
IFS
Bracket
Page 78
SPECIFICATIONS
FK28
Contains
2 x Spacers
FK29
Part No.
Vehicle
Suzuki XL7
Front
Refer to:
2 x Spacers
Toyota
Rear
Fitting Instructions
2 x Bolts M10 X 1.25 X 35MM
Tacoma 2005 on
Drive Shaft
Position
2 x Studs
2 x Washers Flat M10 X 25mm
2 x Washers Spring M10 X 1/8
FK30
2 x Anti-Inversion Bkts
Mitsubishi
Rear
FK31
1 x Bracket
Ford F250 & F350
Rear
6 x Bolts
1999 to 2004
4 x Nuts x M10
Dual Cab Models
Tundra 2007on
Front
Landcruiser 78 Series
Rear Sway
2 x Nuts x M10 Caged 3.3
6 x Washer Spring
10 x Washer Flat
FK32
1 X 3199908 Bracket
1 x 3199909 Kit
2 x Bolt M8 x 1.25 x 20
2 x Hex Nyloc Nut
4 x Washers Flat
FK34
2 x Brackets
Bar Mounts
FK35
1 x Spacer
Ford F250 & F350
2 x Bolts
1999 to 2004
Rear
2 x Nuts
Xtra Cab
Front
Jeep JK - LHD
Rear
Land Cruiser
Rear
Rear
2 x Washers
FK36
4 x Brackets
Ford F350
8 x Bolts M8 x 1.25 x 20
2005 on
8 x Nuts M8 x 1.25
16 x Washers
FK37
1 x Bracket
2 x Bump Stop Spacers
1 x Extension Plate
4 x Packers
2 x Bolt M14 x 1.5
2 x Nut M14 x 1.5
8 x Washers
2 x Bolt M12 x 1.25
2 x Nuts M12 x 1.25
4 x Bolt M8 x 1.25 x 20
4 x Nuts Flanged M8 x 1.25
FK38
76 Series
FK39
1 x Bracket
Jeep JK - RHD
2 x Bump Stop Spacers
1 x Extension Plate
4 x Packers
2 x Bolt M14 x 1.5
2 x Nut M14 x 1.5
8 x Washers
2 x Bolt M12 x 1.25
2 x Nuts M12 x 1.25
4 x Bolt M8 x 1.25 x 20
4 x Nuts Flanged M8 x 1.25
Page 79
SPECIFICATIONS
Part No.
FKWTJ01
Contains
1 x 45mm Panhard Rod Extended
Vehicle
Wrangler
FKWTJ02
Mounting Bracket
TJ
Rear
Position
Refer to:
Manual Sec. 4 GFI Patrol gearbox spacer kit
2 x Spacer Washers
6 x Flat Washers
3 x Spring Washers
3 x Nuts M12 x 1.25
GQGK01
4 x Spacer Plates
GQ Patrol
Gearbox
8 x Hex. Bolts
Maverick
Cross Member
4 x Spacer Plates
Nissan Y61
Gearbox
9 x Spacer 12mm
Patrol SWB
Gearbox
Gearbox
Gearbox
8 x Flat Washers
8 x Spring Washers
GQGK02
17 x Washers Spring
17 x Washers Flat
JWGK01
JWGK02
6 x Spacer Plates
Jeep
6 x Bolt Spacers
Wrangler
6 x 2" Bolts
to 2002
6 x Spacer Plates
Jeep TJ
6 x Bolts
2003 Manual
17 x Washers Flat
Models
17 x Washers Spring
JWGK03
8 x Spacer Plates
Jeep TJ
8 x Bolts
2003 Auto
8 x Washers Flat
Models
8 x Washers Spring
Page 80
SPECIFICATIONS
LEAF SPRING TRIM PACKERS
(Mild Steel 5mm Thick)
PART No.
WIDTH
LENGTH
TP01
TP02
TP03
TP04
TP05
70mm
70mm
60mm
60mm
50mm
140mm
140mm
140mm
140mm
120mm
HOLE DIA. APPLICATIONS
10.3mm TOYOTA 60, 75, NISSAN GQ / FORD MAVERICK CAB CHASSIS & NISSAN GQ UTE
TOYOTA 40, 42, 45, 47
8.7mm
10.3mm NISSAN MQ, MITSUBISHI PAJERO, TRITON, L200
TOYOTA HILUX
8.7mm
SUZUKI SIERRA, HOLDEN DROVER
8.7mm
To be used to correct left to right trim problems. Maximum 2 plates (10mm). Order centre bolt separately.
Refer Manual for Instructions.
CLIP LINER KITS FOR LEAF SPRINGS
Kit Part No.
Contents: Clip Liner Size & Quantity
To Suit OME
To Suit Dakar
CLK11
CLK113A
CLK113B
CLK13
CLK14
CLK17
CLK18
CLK201
CLK22
CLK221
CLK3
CLK39
CLK4
CLK57
CLK6
CLK9
CLKJ1
CLKJ2
CLKNN
CLKROD
CLK13D
CLK15D
CLK26D
CLK33D
CLK38D
CLK40D
CLK43D
CLK48D
CLK55D
CLK57D
CLK58D
20mm X 4
30mm X 4, 90mm X 2
30mm X 4, 80mm X 2
40mm X 4
30mm X 4, 60mm X 2
35mm X 4, 70mm X 2
30mm X 4, 90mm X 2
40mm X 4, 80mm X 2
35mm X 4, 40mm X 2
20mm X 4, 40mm X 2
30mm X 4
50mm X 4, 80mm X 2
40mm X 4
30mm X 4, 35mm X 2
45mm X 4, 95mm X 2
35mm X 2, 30mm X 2
25mm X 4
30mm X 4, 80mm X 2
80mm X 2
30mm X 4, 70mm X 2
35mm X 4
55mm X 4, 150mm X 2
45mm X 2, 95mm X 2
40mm X 4, 85mm X 2
20mm X 4, 65mm X 2
60mm X 2
35mm X 2, 45mm X 4, 85mm X 2
47mm x 2
40mm x 2, 50mm x 2
35mm x 2, 120mm x 2
45mm x 2, 115mm x 2
OME110, 11, 111, J1F
OME113A, 1131A
OME113B, 1131B
OME13, 131
OME14, 141
OME17, 171
OME18, 181, 1811
OME201
OME22, 222
OME221A/B
OME3A/B, 31A/B, JC1A/B
OME39, 391, 3911, 39111
OME4, 41
OME67, 671
OME6A/B, 61A/B, 611A/B
OME91A/B, 99A/B
OMEJ1R
OMEJC2A/B
OMENN1, NN11, NN2
OMEROD1, ROD11, ROD4, ROD5
CS003F, 4F, 5F
CS004RA, 5RA
CS004RB, 5RB
CS001F, 2F
CS001R, 2R
CS009R, 10R, 28R, 29R, 53R, 54R
CS018R, 19R, 20R
CS003R
CS022R, 23R
CS017RA/B
CS010FA/B, 11FA/B, 34RA/B
CS006R, 7R, 8R
CS011R, 12R, 49R, 56R
CS006F, 7F
CS016RA/B, 42R, 46RA/B, 47R
CS008FA/B, 9FA/B
CS036R
CS035RA/B
CS030R, 31R, 32R
CS024R, 25R
CS013FA/B, 14F
CS013R, 14R, 15R
CS026R, 27R
CS033RA/B, 50R, 51R
CS038R, 39R
CS04OR, 41R
CS043R, 44R, 45R
CS048R
CS055R
CS057R
CS058R
OME26, 261
INTER-LEAF LINER KIT FOR LEAF SPRINGS
IL01YE
SLK60
SLK70
6 LINERS PER KIT
4 LEAF SLEEVES TO SUIT 60MM WIDTH
4 LEAF SLEEVES TO SUIT 70MM WIDTH
LEAF SPRING CENTRE BOLT SLEEVES
Part No.
Length mm
OD mm
ID mm
Application
CBS01
CBS02
15
10
25
19
15
16.8
LandCruiser 60 series rear
GQ Patrol cab chassis front
Page 81
DIAGRAM REFERENCE FOR SUSPENSION BUSH KITS
Diagram 1.
Diagram 2.
Diagram 3.
Diagram 4.
Diagram 5.
Diagram 6.
Page 82
DIAGRAM REFERENCE FOR SUSPENSION BUSH KITS
Diagram 7.
Diagram 8.
Diagram 9.
Diagram 10.
Diagram 11.
Diagram 12.
Page 83
SUSPENSION BUSH KIT SELECTION
VEHICLE
YEAR
DESCRIPTION
LOC'N
OME P/NO.
QTY
REQ.
NOTE
Refer Diagram 7
DAIHATSU
F Series All Models
5/93 on
F
Sway bar - link lower
OMESB2360
1
R
Sway bar - link upper
OMESB2360
1
"
"
Feroza All Models
10/88 on
F
Sway bar - link inner/outer
OMESB2360
2
"
"
Rocky All Models
4/84 to 93
F
Sway bar - link eye
OMESB0052
1
"
"
OMESB2361
1
OMESB82
2
Refer Diagram 4
1
Refer Diagram 8
FORD
Courier All Models
Maverick SWB & Wagon Models
1/87 on
8/87 to 9/93
F
Sway bar - link
R
Spring bush
F
Caster Kit
R
OMECA77B
Refer Diagram 2
Coil Packer - 5mm
OMEGQPF05
"
Coil Packer - 10mm
OMEGQPF10
"
"
"
Control arm - to diff front/centre (std) OMESB0055
Control arm - to chassis
OMESB0056
1
"
"
1
"
"
Panhard rod
OMESB0054
1
"
"
Sway bar - D mount (15mm)
OMESB2365
1
"
"
Sway bar - link
OMESB2379
1
"
"
Coil Packer - 5mm
OMEGQPR05
1
Coil Packer - 10mm
OMEGQPR10
Control arm - upper
OMESB0062
Control arm - lower
OMESB0061
Panhard rod
Refer Diagram 9
"
"
1
"
"
1
"
"
OMESB0054
1
"
"
Sway bar - D mount (16mm)
OMESB2366
1
"
"
Sway bar - link
OMESB2379
1
"
"
Spring & shackle bush kit
OMESB64
2
Suits OME springs only
Refer Diagram 4
F
Spring bush
OMESB19
2
Refer Diagram 4
R
Spring bush
OMESB19
2
Suits OE & OME springs
Refer Diagram 4
R
OMESB90
2
Refer Diagram 4
81 to 87
R
Spring bush
OMESB80
2
V6 Models Only
88 on
R
Spring bush
OMESB80
2
LADA NIVA
ALL
F
Coil Packer - 10mm
OMELNF10
Maverick Single Cab Models Leaf Springs
GMH / ISUZU
Drover
Jackaroo / Trooper Models
2/85 on
8/85 - 91
UBS 16 & 17
Rodeo - Isuzu Pick Up Models
All Models
Page 84
Refer Diagram 4
Refer Diagram 4
VEHICLE
YEAR
LOC'N
92 on
F
OME P/NO.
QTY
REQ.
NOTE
CALR2
1
Suits 44mm wide control
arms Refer Diagram 8
Control arm - to diff
OMESB0072
1
"
"
OMESB0066
1
"
"
Panhard rod
OMESB0065
1
"
"
1
"
"
DESCRIPTION
LAND ROVER
Defender 90, 110 & 130 Models
R
County 110 Model
84 to 92
F
R
Discovery All Models
89 to 99
F
R
Range Rover
72 to 86
F
R
Range Rover
86 to 95
F
R
Caster kit
Sway bar - link
OMESB3022
A arm - upper
OMESB0071
1
OMESB0070
1
"
"
Control arm - to chassis (20mm-ID)
OMESB0069
1
"
"
Sway bar - link
OMESB3022
1
"
"
CALR1
1
OMESB0067
1
"
"
OMESB0066
1
"
"
Panhard rod
OMESB0065
1
"
"
A arm - upper
OMESB0071
1
OMESB0070
1
"
"
OMESB0068
1
"
"
OMESB0069
1
"
"
CALR2
1
OMESB0072
1
"
"
OMESB0066
1
"
"
Panhard rod
OMESB0065
1
"
"
Sway bar - link
OMESB3022
1
"
"
A arm - upper
OMESB0071
1
OMESB0070
1
"
"
OMESB0069
1
"
"
Sway bar - link
OMESB3022
1
"
"
CALR1
1
OMESB0067
1
A arm - upper
OMESB0071
1
OMESB0070
1
"
"
OMESB0068
1
"
"
OMESB0069
1
"
"
CALR2
1
OMESB0072
1
"
"
OMESB0066
1
"
"
Panhard rod
OMESB0065
1
"
"
Sway bar - link
OMESB3022
1
"
"
A arm - upper
OMESB0071
1
OMESB0070
1
"
"
OMESB0068
1
"
"
OMESB0069
1
"
"
Sway bar - link
OMESB3022
1
"
"
Caster kit
Caster kit
Caster kit
Caster kit
Page 85
Refer Diagram 11
Refer Diagram 11
Refer Diagram 11
"
"
Refer Diagram 11
Refer Diagram 11
VEHICLE
YEAR
DESCRIPTION
LOC'N
OME P/NO.
QTY
REQ.
NOTE
MAZDA
B2500 & B2600
F
Sway bar - link
OMESB2361
1
Refer Diagram 7
R
Spring bush
OMESB82
2
Refer Diagram 4
98 to 5/00
R
Spring bush
OMESB83
2
Refer Diagram 4
9/89 to 5/91
F
Sway bar - link inner
OMESB2361
1
83 to 5/91
F
OMESB2360
2
5/91 to 10/96
F
5/91 on
R
OMESB8
2
3/86 to 96
F
Control arm - upper
OMESB5071
1
Refer Diagram 2
F
OMESB2360
2
Refer Diagram 2
3/87 to 98
B2500 & B2600
MITSUBISHI
Challenger PA Wagon (Rear Leaf Springs)
Pajero
NG
NA, NB, NC, ND, NE, NF & NG
NH & NJ
Suits V6 & intercooled
diesel models Refer
Diagram 2
Suits 4 cyl petrol &
diesel models not
intercooled Refer
Diagram 2
NG, NH & NJ
All Leaf Spring Models
Spring bush
Refer Diagram 4
Triton
ME & MH Models
Club Cab Model Only
R
Spring bush
OMESB38
2
Refer Diagram 4
10/96 on
R
OMESB38
2
Refer Diagram 4
720 Models
8/79 to 85
F
Control arm - upper
OMESB5071
1
Refer Diagram 1
Navara D21 All
9/85 to 97
F
Control arm - upper
OMESB5071
1
"
"
Sway bar - link
OMESB2379
1
"
"
OMESB81
2
Refer Diagram 4
OMESB2379
1
Refer Diagram 1
MK Models
NISSAN
R
Navara D22 All
Pathfinder All
2/97 on
8/86 to 94
R
OMESB81
2
Suits models to 8/02
Refer Diagram 4
R
OMESB91
2
Suits models 10/02 on
Refer Diagram 4
F
Control arm - upper
OMESB5071
1
Refer Diagram 1
Sway bar - link
OMESB2379
1
"
"
Patrol
Use with OMESB29/OE
springs use OMESB3
Refer Diagram 4
Use with OMESB29
suits OME springs
Refer Diagram 4
MQ (Round Head Lights)
80 to 8/84
F
Spring (front eye) bush kit
OMESB28
2
MQ (Square Head Lights)
8/84 to 87
F
Spring (front eye) bush kit
OMESB31
2
80 to 87
F
Spring (rear eye) bush kit
OMESB29
2
Refer Diagram 4
R
OMESB2
2
Suits OE and OME
springs Refer Diagram 4
Spring bush
OMESB29
2
Suits OME springs Refer
Diagram 4
MQ All Models
Page 86
F Body mount - bumper area
OMESB9090
1
4
Suits Wagon & Hardtops, no kit
available for cab Chassis model
F Body mount - cab front
OMESB9091
1
4
Suits All Wagon to 11/94 & All
Hardtop models
F Body mount - cab centre
OMESB9092
1
4
Suits All Wagon & hardtop models
F Body mount - cab front & centre
OMESB9092
2
4
Suits Pick Up & Cab Chassis
models
Caster kit - Control arm
Control arm - to axle
Spring - eye front/rear & shackle
Sway bar - D mount 16mm
Sway bar - D mount 15mm
Panhard rod - bush
Sway bar - link
Coil Packer - 5mm
Coil Packer - 10mm
Body mount - cab rear to axle
Body mount - cab rear to axle
Panhard rod - bush
Spring - eye front/rear & shackle
OMECA77B
OMESB0055
OMESB0056
OMESB1
OMESB2366
OMESB0058
OMESB0054
OMESB2379
OMEGQPF05
OMEGQPF10
OMESB9092
OMESB9092
OMESB0054
OMESB64
1
1
1
2
1
1
1
1
4
8
4
6
2
2
4
8
8
8
8
Suits Leaf Spring models
4
Suits Leaf Spring models
4
8 Suits All Wagon & Hardtop models
8
Suits Coil spring models
8
2
1
1
2
4
4
4
6
R Sway bar - link
OMESB2379
1
8
Suits All Wagon models
Suits All Hardtop models
Not suitable before 9/89
8
Leaf Spring models
4
Suits Cab Chassis models with coil
8
susp.
R Sway bar - D mount 16mm
OMESB0060
1
2
8
R Control arm - lower
R Control arm - upper
R Coil Packer - 5mm
Coil Packer - 10mm
OMESB0061
OMESB0062
OMEGQPF05
OMEGQPR10
1
1
8
8
8
8
F Body mount - bumper area
OMESB9090
1
4
F Body mount - cab front
Body mount - cab centre
F Body mount - cab front & centre
F Caster kit - Control arm - to axle
F Control arm - to axle
F Control arm - to chassis
F Panhard rod - bush
F Sway bar - link
F Sway bar - mount 15mm
R Body mount - cab centre to axle
Body mount - cab centre to axle
R Panhard rod - bush
OMESB9091
OMESB9092
OMESB9092
OMECA77B
OMESB0055
OMESB0056
OMESB0054
OMESB2379
OMESB2365
OMESB9092
OMESB9092
OMESB0054
1
1
2
1
1
1
1
1
1
2
1
1
4
4
4
4
8
4
4
8
2
4
4
4
8
8
8
8
8
8
R Sway bar - link
OMESB2379
1
8
8
OMESB2366
OMESB0061
OMESB0062
OMEGQPR05
OMEGQPR10
1
1
1
2
8
8
DESCRIPTION
DIAGRAM #
OME P/NO.
BUSHES IN KITS
YEAR
LOC'N
MODEL
KITS REQ
NOTES
NISSAN
PATROL - Y60, GQ
11/87 - 97
F
F
F
F
F
F
F
F
F
R
R
R
R
PATROL - Y61, GU
10/97- on
R
R
R
R
Sway bar - mount 16mm
Trailing arm - lower
Trailing arm - upper
Coil Packer - 5mm
Coil Packer - 10mm
Page 87
susp.
Suits Wagon & Hardtop, no kit
available for Cab chassis model
Suits All Wagon & Hardtop models
Suits All Wagon & Hardtop models
Suits All Cab Chassis models
Suits Coil spring models to 2001
Suits All Wagon models
Suits All Hardtop models
8
susp.
Suits Pick Up with coil susp.
8
8
8
Sierra SJ410 & SJ413
TOYOTA
4 Runner Leaf Spring Front & Rear
4 Runner (Surf) LN60, YN60
DIAGRAM #
LJ80
NOTES
4
4
4
4
4
4
Suits OE & OME Springs
6
6
4
4
2
6
4
OMESB2360
1
4
12
OMESB0049
OMESB2915
OMESB3010
1
1
1
2
8
4
12
7
7
OMESB5
OMESB2915
OMESB6
2
1
2
6
8
6
4
4
4
OMESB5
OMESB6
2
2
6
6
4
4
OMESB5
OMESB0049
OMESB6
2
1
2
6
2
6
4
4
4
OMESB0049
1
2
1
OMESB43
2
6
4
Suits OME Springs only
F Sway bar - link
R Spring - bush kit
OMESB2915
OMESB0049
OMESB43
1
1
2
8
2
6
1
1
4
F Sway bar - link
R Spring - bush kit
OMESB3010
OMESB0049
OMESB43
1
1
2
4
2
6
1
1
4
DESCRIPTION
R Coil Packer - 10mm
74 - 6/78
F Spring Bush
74 - 6/78
R Spring Bush
7/78 - 12/81 F Spring Bush
R Spring Bush
7/81 - 95
F Spring Bush
R Spring Bush
7/84 - 10/85 F Spring - bush kit
R Spring - bush kit
4 Runner IFS Front Leaf Spring Rear
4 Runner (Surf) LN61, YN63
11/85 - 9/89 R Spring - bush kit
HiLux IFS Front & Coil Spring Rear
4 Runner (Surf) LN130, RN130,
10/89 - 6/96 F Sway bar - link
VZN130, YN130
R Sway bar - link
R Sway bar - link
HiLux 4WD Leaf Spring Front & Rear
HiLux (Surf) LN36, 46 RN36, 46
F Sway bar - link
R Spring - bush kit
HiLux (Surf) LN65, YN 65, 67
R Spring - bush kit
HiLux (Surf) RN105, LN106
R Spring - spring bush
OME P/NO.
KITS REQ
SUZUKI
Jimny SN413
LJ50
YEAR
LOC'N
MODEL
BUSHES IN KITS
OMESJR10
OMESB25
OMESB25
OMESB19
OMESB19
OMESB19
OMESB19
2
2
2
2
2
2
OMESB5
OMESB6
2
2
OMESB6
Suits LN130, RN130 models
Suits VZN130, YN130 models
HiLux 4WD IFS Front & Leaf Spring
Rear
HiLux (Surf) LN107, 111, RN106, 110,
10/88 - 12/97 F Sway bar - mount 25mm
111
R Spring - bush kit
LN167, 172, RZN169, 174
KZN165
11/97 on
12/99 on
Page 88
FJ60, 62, HJ60, 62
FJ62, HJ60, 61
Bundera (Prado NZ) LJ70, RJ70
BJ70, 73, 74
HJ75
DIAGRAM #
FJ55
OME P/NO.
BUSHES IN KITS
TOYOTA (continued)
BJ40, 42, FJ40, 45, ,JH45, 47
YEAR
Spring - bush kit-to suit 15mm ID
OMESB30
OMESB4
OMESB1
OMESB4
OMESB30
2
2
2
2
2
6
6
6
6
6
4
4
4
4
4
R Spring - bush kit-to suit 18mm ID
OMESB79
2
6
4
R Spring - bush kit-to suit 18mm ID
R Sway bar - link
OMESB1
OMESB2102
2
2
6
2
4
4
Suits 35mm spring eye
Suits 35mm spring eye & 30mm
hanger bracket
Suits model 1/79 - on
OMESB7
OMESB7
OMESB2102
2
2
2
6
6
2
4
4
4
Suits models 1/79 - on
LOC'N
MODEL
KITS REQ
1969 - 12/84 F
F
F
R
R
DESCRIPTION
R Spring - bush kit
R Sway bar - link
NOTES
11/80 - 8/87 F
F
R
R
R
Spring - bush kit
Sway bar - link
Spring - bush kit
Sway bar - link upper & lower
OMESB1
OMESB2915
OMESB1
OMESB2102
OMESB2327
2
1
2
2
1
6
8
6
2
2
4
4
4
4
4
8/87 - 12/91 F
F
F
R
R
R
Spring - bush kit
Sway bar - link
Spring - bush kit
Sway bar - link upper & lower
OMESB1
OMESB2915
OMESB2327
OMESB1
OMESB2102
OMESB2327
2
1
1
2
2
1
6
8
2
6
2
2
4
4
4
4
4
4
1/85 - 12/91 F
F
F
F
F
R
R
Panhard rod - bush
Sway bar - link
Control arm - lower rear
Panhard rod - bush
Control arm - lower front
OMESB8133
OMESB2361
OMESB2327
OMESB0049
OMESB8131
OMESB8133
OMESB8131
1
2
1
1
1
1
1
4
8
2
2
4
4
4
10
10
10
10
10
8
8
F
F
F
F
R
Spring - bush kit
Sway bar - link
Spring - bush kit
OMESB1
OMESB2361
OMESB2327
OMESB0063
OMESB1
2
2
1
1
2
6
8
2
2
6
4
4
4
4
4
F
F
F
F
R
Spring - bush kit
Sway bar - link
Spring - bush kit
OMESB1
OMESB2361
OMESB2327
OMESB0063
OMESB16
2
2
1
1
2
6
8
2
2
6
4
4
4
4
4
1/85-3/90
1/85-3/90
Page 89
Suits models 8/87 - 1/90
Suits models 7/87 - 1/90
Suit OE & OME Springs
DIAGRAM #
FZJ70, 75, HZJ70, 73, 75
BUSHES IN KITS
TOYOTA (continued)
FJ70, 73, 75
1/85 - 10/92 F
F
F
F
F
R
R
R
Spring - bush kit
Sway bar - link
Spring - bush kit
Spring - bush kit
OMESB1
OMESB2361
OMESB2327
OMESB0063
OMESB0049
OMESB16
OMESB1
OMESB0095
2
2
1
1
1
2
2
1
6
8
2
2
2
6
6
2
4
4
4
4
4
4
4
4
1/88-11/99
Spring - bush kit
Sway bar - link
OMESB1
OMESB2361
OMESB0063
OMESB0049
2
2
1
1
6
8
2
2
4
4
4
4
OMESB0095
1
2
4
OMESB16
OMESB1
2
2
6
6
4
4
R Sway bar - mount 25mm
OMESB0095
1
2
4
F Spring - bush kit
F Sway bar - link
R Spring - bush kit
OMESB1
OMESB2361
OMESB1
2
1
2
6
8
6
4
4
4
F Caster kit
F Control arm - to chassis
OMECA77B
OMESB0050
1
1
4
4
10
10
Caster align offset 3 degree
F Sway bar - link outer
OMESB2413
1
2
10
OMESB2414
OMESB0046
OMESB3010
OMESB0052
OMESB3010
OMESB0095
1
1
1
1
1
1
2
4
4
4
4
2
10
10
8
4
4
4
Spring - bush kit
OMESB86
2
6
4
Spring - bush kit
OMESB84
2
6
4
Suits JFZ / HDJ / HZJ79 models
with OME Springs
Spring - bush kit
OMESB85
2
6
4
Suits all models with OME springs
& greasable shackles
YEAR
LOC'N
MODEL
KITS REQ
F
F
F
F
DESCRIPTION
R Spring - bush kit
R Spring - bush kit
PZJ70, 73
FZJ78, 79, HDJ78, 79, HZJ78, 79
3/90-2/91
8/99 on
F
F
R
R
R
Panhard rod - bush
Sway bar - link inner
Sway bar - link outer lower
Sway bar - link outer upper
Page 90
OME P/NO.
NOTES
Suits FJ75 models to 8/91
Suits FJ70, 73 models
Suits Bracket height =38mm
Suits HZJ75 models to 4/91
Suits HZJ75 models to 4/91
Suits 4/91 on Bracket height =
38mm
Suits FJ75 models
Suits HZJ70 & 73 models
Suits 4/91 on Bracket height =
38mm
Contains new bolts, nuts & crush
tubes
Suits Bracket height = 38mm
Suits FZJ / HDJ / HZJ78 models
with OME Springs
FZJ105, HZJ105 Solid Axle
1/90 - 2/98
3/98 on
F
F
F
F
F
F
F
F
F
F
F
F
R
R
R
R
R
R
R
Caster kit
Control arm - to chassis only
Panhard rod - bush
Control arm - complete kit
Coil Packer - 5mm
Coil Packer - 10mm
Panhard rod - bush
Control arm - lower
Control arm - upper
OMECA77B
OMESB0050
OMESB0046
OMESB0045
OMESB0051
OMESB0044
OMESB0063
OMESB0094
OMESB0091
OMESB0092
OME80PF05
OME80PF10
OMESB0053
OMESB0052
OMESB3010
OMESB0049
OMESB0095
OMESB0047
OMESB0048
1
1
1
2
1
1
1
1
1
1
4
4
4
6
4
4
2
2
2
2
1
1
1
1
1
1
1
4
4
4
2
2
8
8
10
10
10
10
10
10
10
10
10
10
10
10
8
8
8
8
8 Suits large Bracket height = 38mm
8
8
F
F
F
F
F
F
F
Caster kit
Control arm - complete kit
Control arm - to chassis only
Panhard rod - bush
Coil Packer - 5mm
Coil Packer - 10mm
OMECA77B
OMESB0045
OMESB0050
OMESB0046
OMESB0044
OME80PF05
OME80PF10
1
2
1
1
1
4
6
4
4
2
10
10
10
10
10
OMESB0092
1
2
10
Panhard rod - bush
Control arm - lower
Control arm - upper
Coil Packer - 5mm
Coil Packer - 10mm
OMESB3010
OMESB0052
OMESB0053
OMESB0095
OMESB0047
OMESB0048
OME80PR05
OME80PR10
1
1
1
1
1
1
4
4
4
2
8
8
8
8
9
8
8
8
OMESB2361
OMESB2915
1
1
4
8
7
7
OMESB88
OMESB89
2
2
4
4
4
4
R
R
R
R
R
R
R
R
DESCRIPTION
LandCruiser Lexus
HDJ100, UZJ100 (Lexus) IFS
3/98 on
F Sway bar - link upper
R Sway bar - link
Tacoma
To 2004
R Spring bush
R Spring bush
Page 91
OME P/NO.
DIAGRAM #
BUSHES IN KITS
TOYOTA (continued)
FJ80, FZJ80, HDJ80, ,HZJ80
YEAR
LOC'N
MODEL
KITS REQ
NOTES
STD replacement
Suits large bracket (Bracket height
= 38mm)
Suits original shackles only
SPECIFICATIONS
SHOCK ABSORBERS
Part Number
N15/N15C
N16
N17
N18
N19/N19C
N21
N22F
N23F
N25
N26F
N27
N28
N29/N29C
N30
N30E
N31S
N32
N33
N34
N35/N35C
N36/N36C
N37
N38S
N39/N39C
N40/N40C
N41
N42
N43
N44
N45F
N46
N47
N48
N49
N50
N51
N52/N52F
N53/N53C
N54
N55
N56
N57G
N58
N59
N60G
N61/N61C
N62G
N63G
N64/N64C
N65
N66/N66C
Open
Length
(mm)
517
477
632
340
492
492
651
492
642
381
560
504
656
618
659
501
500
625
509
568
562
591
473
562
556
499
594
485
560
554
560
406
560
446
584
365
425
628
554
585
554
340
325
559
340
607
507
478
478
385
568
Closed
Length
(mm)
327
352
382
225
292
292
396
292
377
245
340
309
396
368
389
318
315
365
329
348
342
366
339
342
336
309
359
295
340
324
340
251
335
271
349
235
265
378
339
345
339
225
215
339
225
367
317
299
299
245
335
UPPER MOUNT BUSH KIT
Type
E4005-S
P4184
E4026-T
P4169
P4184
P4184
E4005
P4184
E4005
P4169
E4005
P4169
E4005
E4001
E4001
N/A
P4169
P4169
E4001
P4169
E4026-T
E4040-S
P
P4169
E4003
E4001
E4001
P4169
E4005
P4184
E4005
P4169
E4001
P4169
P4169
P4169
P4161
E4040-B
E4001
P4161
E4001
P4169
P4169
E4001
P4169
E4005-S
E4001
P4169
P4169
P4169
P4169
Original Kit
110-034-072
SMP374
SMP488
SMP474
SMP345
SMP345
SMP363
SMP345
SMP517
SMP474
110-034-063
SMP474
SMP363
110-034-065
*110-034-065
N/A
SMP474
SMP476
110-034-065
SMP476
110-110-089
110-110-054
N/A
SMP476
110-034-076
110-034-065
110-034-065
SMP474
110-034-063
SMP343
110-034-063
SMP474
110-034-065
SMP474
SMP474
SMP474
SMP334
110-004-040
*110-034-065
SMP334
*SMP516
SMP474
SMP474
*SMP516
SMP474
SMP363
110-034-065
SMP474
SMP474
SMP474
SMP476
Bushes only
REPLACEMENT
N/A
OMEB42
11003478
OMEB13
OMEB42
OMEB42
OMEB36
OMEB42
OMEB36
OMEB13
OMEB36
OMEB13
OMEB36
OMEB14
OMEB14
N/A
OMEB13
OMEB13
OMEB14
N/A
110-110-089
N/A
N/A
SMP476
N/A
OMEB14
OMEB14
OMEB13
OMEB36
OMEB42
OMEB36
OMEB13
OMEB14
OMEB13
OMEB13
OMEB13
OMEB12
N/A
OMEB14
OMEB12
OMEB14
OMEB13
OMEB13
OMEB14
OMEB13
OMEB17
OMEB14
OMEB13
OMEB13
OMEB13
N/A
LOWER MOUNT BUSH KIT
Type
E4005
E4078-T
E4026-S
E4026-S
P4184
P4184
E4005
P4184
P4169
E4026-S
P4184
E4005
E4005
E4001
E4001
N/A
E4026-S
E4026-S
E4026-S
E4026-T
E4026-S
E4040-S
E-B
E4026-T
E4026-S
E4001
E4001
E4001
P4184
P4184
P4184
P4169
P4169
P4169
E4005
E4026-BS
E4026-S
E4026-S
E4001
E4026-S
E4001
E4026-S
E4026-S
E4001
E4026-T
E4026-S
E4005-S
E4005-S
E4005-S
E4026-S
E4026-TB
Bush kits with part numbers starting with SMP indicate the kits have the urethane bush, mounting nut & washers.
Note:
*Spacer Kit SMP511 also supplied.
See page 97 for legend of mount types
Page 92
Original Kit
110-034-064
SMP487
110-034-074
110-034-056
SMP345
SMP345
SMP363
SMP345
SMP474
N/A
SMP343
SMP343
SMP363
110-034-065
110-034-065
N/A
N/A
110-034-056
110-034-056
110-110-088
110-034-056
110-110-054
N/A
110-110-088
110-034-056
110-034-065
110-034-065
110-034-065
SMP343
SMP343
SMP343
SMP474
SMP474
SMP474
110-034-064
110-034-181
110-A42-071
110-034-181
110-034-065
110-A42-071
SMP516
N/A
N/A
SMP516
110-110-078
110-034-056
110-034-077
110-034-077
110-034-077
110-034-056
110-110-088
Bushes only
REPLACEMENT
OMEB36
110034078
N/A
OMEB10
OMEB42
OMEB42
OMEB40
OMEB42
OMEB13
OMEB10
SMP343
OMEB36
OMEB40
OMEB14
OMEB14
N/A
OMEB10
OMEB10
OMEB10
110-110-088
OMEB10
N/A
N/A
110-110-088
OMEB10
OMEB14
OMEB14
OMEB14
SMP343
OMEB42
SMP343
OMEB13
OMEB13
OMEB13
OMEB36
110-034-181
OMEB10
110-034-181
OMEB14
OMEB10
OMEB14
OMEB10
OMEB10
OMEB14
110034078
OMEB10
OMEB17
OMEB17
OMEB17
OMEB10
N/A
SPECIFICATIONS
SHOCK ABSORBERS
Part Number
N67
N68
N68E
N69
N70
N71E
N72F
N73
N74E
N75
N75E/N75F
N76
N77
N78
N79
N80
N81
N83
N84
N85
N86/N86C
N87
N88
N89
N90
N91S
N91SC
N92
N93
N94
N95
N96
N97
N98
N100
N101/N101C
N102
N103S
N104/N104C
N105
N106/N106C
N107/N107C
N108/N108C
N109S
N110
N111
N112
N113
N114
N115
Open
Length
(mm)
562
634
660
470
614
620
548
614
620
640
652
685
570
447
507
352
499
345
485
587
539
352
589
594
582
470
470
589
485
587
599
431
545
389
440
610
482
504
641
508
537
608
593
472
575
548
449
537
475
554
Closed
Length
(mm)
339
387
394
290
354
370
329
354
370
390
397
408
340
287
307
232
309
225
295
357
329
232
349
359
357
335
335
349
295
357
359
261
325
249
290
360
302
318
391
318
317
373
363
327
350
328
279
337
285
324
Type
E4026-TB
E4005
E4005
E4005
P4184
P4184
P4169
P4184
P4184
E4005
E4005
E4005
E4032-S
E4005
E4005
P4169
E4001
P4169
P4169
E4005
P4169
P4169
P4169
E4001
E4005
PPP4169
P4169
E4005
E4001
P4169
E4001
P4169
P4203
P4204
P4169
PE4040-S
P4169
P4184
E4005-S
E4005-S
N/A
P4158
P4170
P4169
E4005
P4184
P4184
Original Kit
110-110-089
110-034-064
110-034-064
110-034-064
SMP403
SMP403
SMP474
SMP501
SMP501
110-034-064
110-034-064
110-034-064
110-110-077
110-034-064
110-034-064
SMP474
110-034-065
SMP474
SMP474
110-034-064
SMP474
SMP474
SMP474
**110-034-065
110-034-064
SMP415
SMP415
SMP474
SMP474
110-034-064
**110-034-065
SMP474
110-034-065
SMP474
SMP493
SMP493
SMP474
N/A
110-110-054
SMP474
SMP501
110-110-066
110-110-066
Use OE Bushes
SMP641
SMP312
SMP474
110-034-064
SMP345
SMP343
Bushes only
REPLACEMENT
N/A
OMEB15
OMEB15
OMEB36
OMEB42
OMEB42
OMEB13
OMEB42
OMEB42
OMEB15
OMEB15
OMEB15
N/A
OMEB15
OMEB36
OMEB13
OMEB14
OMEB13
OMEB13
OMEB15
OMEB13
OMEB13
OMEB13
OMEB14
OMEB15
N/A
N/A
OMEB13
OMEB13
OMEB15
OMEB14
OMEB13
OMEB14
OMEB13
N/A
N/A
OMEB13
N/A
N/A
OMEB13
OMEB42
N/A
N/A
N/A
N/A
N/A
OMEB13
OMEB15
OMEB42
OMEB42
Type
E4026-S
E4005
E4005
P4184
P4184
E4005
E4005
P4184
E4005
E4005
E4005
E4005
P4169
E4005
P4169
E4005-S
E4001
E4026-S
E4026-S
E4005
E4005
E4005-S
E4005
E4001
E4005
E4050-B
E4050-B
E4005
E4026-S
E4005
E4001
P4169
P4169
E4005-S
E4050-BS
E4005
E4050-BS
N/A
E4055-S
E4026-S
P4184
E4005-T
E4005-BS
E4055BS
E4040-BS
E4026-S
E4005
E4005
P4184
P4184
Note:
*Spacer Kit SMP511 also supplied.
** Spacer Kit SMP495 supplied
Page 93
Original Kit
110-034-056
110-034-064
110-034-064
SMP343
SMP403
110-034-064
110-034-064
SMP501
110-034-064
110-034-064
110-034-064
110-034-064
SMP474
110-034-064
SMP474
110-034-072
110-034-065
SMP381
N/A
110-034-064
110-034-064
110-034-072
110-034-064
110-034-065
110-034-064
110-110-060
110-110-060
110-034-064
N/A
110-034-064
110-034-065
SMP474
SMP474
110-034-072
110-110-090
110-034-063
110-110-090
N/A
110-110-069
110-004-074
SMP501
110-110-067
110-110-066
110-110-075
110-110-076
SMP487
110-034-064
110-034-064
SMP345
SMP343
Bushes only
REPLACEMENT
OMEB10
OMEB15
OMEB15
OMEB42
OMEB42
OMEB36
OMEB36
OMEB42
OMEB36
OMEB15
OMEB15
OMEB15
OMEB13
OMEB15
OMEB13
OMEB17
OMEB14
OMEB10
OMEB10
OMEB15
OMEB15
OMEB17
OMEB36
OMEB14
OMEB15
110-110-060
110-110-060
OMEB36
OMEB10
OMEB15
OMEB14
OMEB13
OMEB13
OMEB17
110-110-090
OMEB40
N/A
N/A
N/A
OMEB10
OMEB42
N/A
110-110-066
N/A
N/A
N/A
OMEB15
OMEB15
OMEB42
OMEB42
SPECIFICATIONS
SHOCK ABSORBERS
Part Number
N116
N117
N118
N119S
NC120
N121S
NC122
N123S
N124S
N125S
N126S
N127S
N128
N129S
NS130
NS131
N132
N133
N134
N135S/N136S
NC137
NC138
N139S
N140S
N141
N142
N143S
N144S
NC145
N146
N147S
N148S
N149
N150
N151
N152
N153
N154
N155
N156S
N157S
N158S
N159S
NC160
NC161
N162
NC163
N164
N165
N166S
N167S
N168
Open
Length
(mm)
527
578
532
596
609
576
589
596
576
411
411
601
358
472
333
333
573
443
559
602
539
609
543
543
577
577
590
590
651
655
476
476
504
388
308
576
528
562
568
365
365
405
405
601
572
348
617
527
657
543
543
600
Closed
Length
(mm)
327
358
322
395
402
389
402
395
389
289
289
385
238
327
201
201
359
287
349
393
369
400
405
405
353
353
408
408
439
379
362
362
313
242
202
345
312
336
332
530
530
610
610
403
386
222
386
317
397
411
411
370
Type
E4001
E4057-S
P4169
N/A
N/A
N/A
N/A
N/A
N/A
P
P
P
P4205
N/A
P
P
E4057-S
P4203
E4057-S
P
P
P
P
P
P4184
P4184
P
P
P
P
P
P
E4051-BS
P4205
P4205
P4158
P4205
E4001
P4205
P
P
P4205
P
P4184
E4005
P
P
E4005
Original Kit
Bushes only
REPLACEMENT
Type
110-034-065
110-110-085
SMP474
SMP483
110-039-058
SMP483
110-039-058
SMP483
SMP483
SMP363
SMP363
SMP354
SMP474
Use OE Bushes
SMP497
SMP497
110-110-085
SMP493
110-110-085
SMP483
SMP546
SMP546
SMP633/626
SMP633/626
SMP569
SMP569
SMP625
SMP641
SMP640
SMP640
110-110-092
SMP474
SMP474
SMP641
SMP474
110-034-065
SMP474
Nut only
Nut only
Nut only
Nut only
SMP546
SMP625 & 633
SMP474
SMP625 & 633
SMP501
110-034-064
SMP633 & 626
SMP633 & 626
SMP649
OMEB14
N/A
OMEB13
SMP483
110039058
SMP483
110039058
SMP483
SMP483
SMP363
SMP363
SMP354
OMEB13
N/A
SMP497
SMP497
N/A
SMP493
N/A
SMP483
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
OMEB13
OMEB13
N/A
OMEB13
OMEB14
OMEB13
OEM
OEM
OEM
OEM
SMP546
SMP625 & 633
OMEB13
SMP625 & 633
OMEB42
OMEB15
SMP633 & 626
SMP633 & 626
SMP649
E4005-S
E4001-S
E4005
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
E-BS
E4026-T
E4055-BS
N/A
N/A
E4005-S
E4050-BS
E4005-S
N/A
E4050-S
E4050-S
E4005
E4005
E4055-BS
E4050-S
E4050-S
E4051-BS
E4026-S
E4026-S
E4051-BS
E4026-S
E4001
E4001
N/A
N/A
N/A
N/A
N/A
N/A
E4026-S
N/A
P4184
E4005
E4050-S
E4050-S
E4005
Note:
Page 94
Original Kit
110-034-072
110-034-020
110-034-080
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
SMP489
110-110-075
N/A
N/A
110-110-086
110-110-090
110-110-086
N/A
110-110-060
110-110-060
SMP621
SMP621
110-110-093
110-110-060
110-110-060
110-110-092
110-034-056
110-034-056
110-110-076
110-034-074
110-034-065
110-034-065
OEM
OEM
OEM
OEM
N/A
N/A
110-034-056
N/A
SMP501
110-034-064
110-110-060
110-110-060
SMP649
Bushes only
REPLACEMENT
OMEB17
OMEB10
OMEB11
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
110-110-075
N/A
N/A
N/A
110-110-090
N/A
N/A
110-110-060
110-110-060
OMEB40
OMEB40
N/A
N/A
N/A
N/A
110-100-060
110-110-060
N/A
OMEB10
OMEB10
N/A
OMEB10
OMEB14
OMEB14
OEM
OEM
OEM
OEM
N/A
N/A
OMEB10
N/A
OMEB42
OMEB15
110-110-060
110-110-060
SMP649
SPECIFICATIONS
SHOCK ABSORBERS
Part Number
N169
N170
N171
N172
N173S
N174
N175
N176
N177
N178
N179
N180
N181
N182
N183S
N184
N185
N186S
N187
N188S
N189
N190
N191
N192S
N193
N194
N195
N196
N197
N198
N199
N200
N201S
N202
N203S
N204
N205
N206S
N207S
N208S
N209
N210
N211
N212
OME007
OME013
OME014
OME015
OME018
OME023
OME025
Open
Length
(mm)
600
348
532
532
481
597
603
535
485
600
790
690
537
608
390
379
567
426
360
600
658
589
589
661
360
560
595
652
615
440
610
543
577
472
576
507
602
602
608
610
610
595
618
600
473
495
415
585
429
415
Closed
Length
(mm)
370
322
316
316
301
341
363
319
299
364
456
406
317
352
281
255
341
298
240
360
394
349
424
391
240
340
360
397
375
290
360
405
353
327
345
312
399
399
433
360
360
360
375
359
292
305
256
359
270
256
Type
E4005
P4205
P4205
P4205
P
P4180
E4005
E4055-S
E4055-S
E4005
E4005
E4005
P4184
P4205
PE4051-S
E4001
PP4205
E4005
E4057-S
P4205
PP4203
P4205
P4204
P4184
E4005
E-TBA
P4203
P4204
PP4184
P
P4158
P4213
PPP4214
P4204
P4204
P4184
E4053
E4004
E4001
E4001
P4175
E4003
E4001
P4175
Original Kit
SMP649
SMP474
SMP474
SMP474
N/A
SMP343
110-034-063
110-110-066
110-110-066
110-034-080
110-034-080
110-034-080
SMP501
SMP474
SMP633
110-110-076
110-043-065
N/A
SMP475
110-034-064
110-110-085
SMP474
SMP659
SMP493
SMP475
SMP493
SMP374
110-034-064
TBA
SMP493
SMP493
SMP633/626
SMP569
Use OE Bushes
SMP641
SMP665
Nut only
Nut only
TBA
SMP493
SMP493
SMP374
110-110-105
110-034-003
110-034-065
110-034-065
SMP333
110-034-003
110-034-065
SMP333
Bushes only
REPLACEMENT
SMP649
OMEB13
OMEB13
OMEB13
N/A
SMP343
OMEB36
N/A
N/A
110-034-080
110-034-080
110-034-080
OMEB42
OMEB13
N/A
N/A
OMEB14
N/A
OMEB13
OMEB15
N/A
OMEB13
SMP659
OMEB13
OMEB42
OMEB15
TBA
SMP493
SMP493
SMP633/626
SMP569
N/A
N/A
N/A
N/A
N/A
TBA
N/A
N/A
OMEB42
N/A
N/A
OMEB14
OMEB14
OMEB13
N/A
OMEB14
OMEB13
Type
E4005
E4026-S
E4005
E4005
P4180
P4180
P4180
P4180
E4005-S
E4005-S
E4005-S
P4184
E4026-S
E4063-BS
E4051-S
E4063-S
E4055-BS
E4050
E4005BS
E4005-S
E4005-S
E4055-BS
E4040-BS
E4050
E4051-S
E-TBA
E-4005
E-TBA
E4050-BS
E4005
E4050-S
E4005
E4066-BS
E4051-BS
E4051-BS
N/A
N/A
E4066
E4005
E4005
E4026
E4026
E4003
E4001
E4001
E4001
E4003
E4001
E4001
Note:
Page 95
Original Kit
SMP649
110-034-056
SMP650
SMP650
N/A
SMP343
SMP343
SMP343
SMP343
110-A42-124
100-A42-124
110-A42-124
SMP501
110-034-056
110-110-100
110-110-076
110-110-100
110-110-075
TBA
110-034-080
110-110-086
110-034-064
110-110-101
110-110-102
TBA
110-110-103
TBA
110-034-064
TBA
110-110-060
110-034-063
110-110-060
SMP621
110-110-086
110-110-076
110-110-092
N/A
N/A
N/A
110-034-063
110-034-063
110-034-181
110-034-181
110-034-003
110-034-065
110-034-065
110-034-065
110-034-003
110-034-065
110-034-065
Bushes only
REPLACEMENT
SMP469
OMEB10
OMEB15
OMEB15
N/A
SMP343
SMP343
SMP343
SMP343
N/A
N/A
N/A
OMEB42
N/A
N/A
N/A
N/A
N/A
TBA
OMEB15
N/A
TBA
TBA
OMEB15
TBA
110-110-060
OMEB40
110-110-060
OMEB40
N/A
N/A
N/A
N/A
N/A
N/A
OMEB40
OMEB40
110-034-181
110-034-181
N/A
OMEB14
OMEB14
OMEB14
N/A
OMEB14
OMEB14
SPECIFICATIONS
SHOCK ABSORBERS
Part Number
OME027
OME028
OME029
OME030
OME031
OME032
OME033
OME034
OME035
Open
Length
(mm)
Closed
Length
(mm)
497
450
502
470
627
608
615
481
495
297
281
314
302
379
369
382
284
299
Type
P4175
P4169
E4028-S
E4028-S
P4175
P4175
PP4175
E4001
Original Kit
SMP333
SMP474
110-110-009
110-110-009
SMP333
SMP333
SMP636
SMP333
110-034-065
Bushes only
REPLACEMENT
OMEB13
OMEB13
N/A
N/A
OMEB13
OMEB13
OMEB13
OMEB13
OMEB14
Type
E4001
E4028-S
E4028-S
E4028-S
E4001
E4001
E4005-S
E4001
E4001
Original Kit
110-034-065
110-110-009
110-110-009
110-110-009
110-034-065
110-034-065
110-034-072
110-034-065
110-034-065
Note:
See below for legend of mount types
SHOCK ABSORBER MOUNT TYPES
Mount Type
Pin Part No.
P4161
P4169
P4170
P4175
P4184
P4203
P4204
P4205
Dimensions (mm)
Thread Length X Dia
62 x M10 x 1.5
53 x M10 x 1.25
73 x M10 x 1.5
58 x M10 x 1.5
71 x M12 x 1.25
85 x M14 x 1.5
77 x M14 x 1.5
54 x M10 x 1.25
OME Replacement
Part No.
OMEB13
OMEB13
OMEB13
OMEB13
OMEB42
Use original
Use original
OMEB13
Mount Type
Eye Part No.
E4001
E4003
E4005
E4026
E4028
E4032
E4040
E4050
E4055
E4057
Dimensions (mm)
OD x ID x L
37 x 25.3 x 24.3
42.6 x 37.7 x 19.5
44.2 x 31.7 x 30
37 x 27 x 25
38.4 x 25.1 x 23
46.7 x 36.6 x 33
46 x 37 x 30
45 x 39 x 35
50 x 40.2 x 34
42 x 32.5 x 29
Mounting Kit
Replacement Part No.
OMEB14
Not available
OMEB36 *OMEB40
OMEB10
Not available
Not available
Not available
Not available
Not available
Not available
T-CROSS PIN MOUNTING
B-BONDED BUSH
S-BUSH WITH SLEEVE
*Special Bush for N22F, N29/N29C Lower Rear Mount
Page 96
Bushes only
REPLACEMENT
OMEB14
N/A
N/A
N/A
OMEB14
OMEB14
OMEB17
OMEB14
OMEB14
SPECIFICATIONS
LEAF SPRINGS
Dakar Part No.
CS001F
CS001R
CS002F
CS002R
CS003F
CS003R
CS004F
CS004RA
CS004RB
CS005F
CS005RA
CS005RB
CS006F
CS006R
CS007F
CS007R
CS008FA
CS008FB
CS008R
CS009FA
CS009FB
CS009R
CS010FA
CS010FB
CS010R
CS011FA
CS011FB
CS011R
CS012FA
CS012FB
CS012R
CS013FA
CS013FB
CS013R
CS014F
+CS014R
CS015F
+CS015R
CS016RA
CS016RB
CS017RA
CS017RB
*CS018R
CS019R
CS020R
OME Part No.
OME13
OME14
OME131
OME141
OME110
OME201
OME11
OME113A
OME113B
OME111
OME1131A
OME1131B
OME67
OME391
OME671
OME3911
OME99A
OME99B
OME39111
OME91A
OME91B
OME17
OME3A
OME3B
OME171
OME31A
OME31B
OME4
OMES1A
OMES1B
OME41
N/A
N/A
OME491
OMEJ1F
+OME492
N/A
+OME493
OME611A
OME611B
OME221A
OME221B
*OME180
OME18
OME181
Stack
Height
(mm)
48.0
43.0
54.0
49.0
30.0
81.0
36.0
58.0
58.0
42.0
64.0
64.0
43.0
82.0
49.0
89.0
32.5
32.5
96.0
39.0
39.0
48.0
43.0
43.0
54.5
49.0
49.0
56.0
24.4
24.4
63.0
30.0
30.0
68.0
26.0
68.0
52.0
76.0
82.0
82.0
48.0
48.0
52.5
52.5
59.0
No. of
Leaves
8
5+1
9
6+1
5
6+3
6
6+2
6+2
7
7+2
7+2
7
7+3
8
8+3
5
5
9+3
6
6
4+2
7
7
5+2
8
8
8
4
4
9
5
5
5+2
4
5+2
6
6+2
7+3
7+3
8
8
3+3
3+3
4+3
Eye Dia. mm
Front
Rear
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
40.0
35.0
40.0
30.0
30.0
40.0
30.0
30.0
30.0
32.5
32.5
30.0
32.5
32.5
32.5
30.0
30.0
32.5
30.0
30.0
40.0
31.4
40.0
52.0
40.0
40.0
40.0
35.0
35.0
39.0
39.0
39.5
* These springs have a 20mm lower 2nd Stage than other springs in the series.
+ These springs have a 20mm higher 2nd stage than other springs in this series
Page 97
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
40.0
35.0
40.0
30.0
30.0
40.0
30.0
30.0
30.0
32.5
32.5
30.0
32.5
32.5
32.5
40.0
40.0
32.5
40.0
40.0
40.0
37.6
40.0
42.0
40.0
40.0
40.0
35.0
35.0
30.0
30.0
30.0
Weight
(kg)
23.0
21.5
27.0
25.6
15.5
45.4
17.7
31.6
31.6
21.5
36.0
36.0
21.6
46.8
25.5
52.2
14.8
14.8
59.5
18.4
18.4
20.0
18.9
18.9
24.2
22.3
22.3
26.8
8.1
8.1
30.2
10.4
10.4
47.9
11.0
47.9
33.0
51.5
50.8
50.8
25.5
25.5
25.0
27.3
30.6
Primary
Free
Camber mm
165
225
165
225
200
235
196
250
230
196
250
230
220
240
220
240
170
150
240
170
150
230
215
200
230
215
200
275
125
110
275
125
110
268
210
268
190
268
250
235
250
230
215
235
235
Spring Rate
lbf/in
350
300 / 450
398
357 / 496
220
510 / 710
257
268 / 570
268 / 570
305
314 / 617
314 / 617
302
388 / 610
348
455 / 600
208
208
500 / 656
254
254
217 / 388
283
283
285 / 445
343
343
211
207
207
240
247
247
279 / 548
148
279 / 548
369
325 / 680
325 / 585
325 / 585
255
255
125 / 485
125 / 485
160 / 540
N/mm
61.3
52.5 / 79
69.8
62.5 / 87
38.5
90 / 125
45
47.0 / 100
47.0 / 100
53.5
55 / 108
55 / 108
53
68 / 107
61
80 / 105
36.5
36.5
88 / 115
44.5
44.5
38.0 / 68.0
49.6
49.6
50.0 / 78.0
60
60
37
36.3
36.3
42
27.9
27.9
52 / 96
26
52 / 96
65
57 / 119
57 / 103
57 / 103
44.7
44.7
22 / 85
22 / 85
28 / 95
cont.
SPECIFICATIONS
LEAF SPRINGS
Dakar Part No.
CS021R
CS022R
+CS023R
CS024R
+CS025R
CS026R
CS027R
CS028R
+CS029R
CS030R
CS031R
*CS032R
CS034RA
CS034RB
CS035RA
CS035RB
CS036R
CS037R
CS038R
CS039R
CS040R
CS041R
CS042R
CS043R
CS044R
+CS045R
CS046RA
CS046RB
CS047R
CS048R
CS049R
CS050R
CS051R
CS053R
CS054R
CS056R
CS057R
CS058R
OME Part No.
Stack
Height
(mm)
OME1811
OME22
+OME222
OMEROD4
+OMEROD5
OME26
OME261
OMEROD11
+OMEROD111
OMENN1
OMENN11
*OMENN2
OMEJC1A
OMEJC1B
OMEJC2A
OMEJC2B
OMEJ1R
OMEJ2R
OMES2
OMES21
OME19
OME191
OME36
N/A
N/A
N/A
OME15A
OME15B
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
65.5
41.0
58.0
54.0
54.0
59.0
65.5
48.0
60.5
52.5
59.0
52.5
32.5
32.5
37.0
37.0
32.5
32.5
36.0
42.0
29.0
35.0
45.0
50.0
50.0
57.0
52.0
52.0
57.0
50.0
45.0
59.0
67.0
35.0
41.0
37.0
59.0
66.0
No. of
Leaves
5+3
5+1
6+2
4+2
4+2
4+3
5+3
4+2
4+3
3+3
4+3
3+3
5
5
4+1
4+1
5
5
3+2
4+2
3+1
4+1
4+1
4+2
4+2
5+2
5+2
5+2
5+2
3+2
4+1
4+2
5+2
4+1
5+1
3+1
4+2
5+2
Eye Dia. mm
Front
Rear
39.0
31.5
31.5
39.0
39.0
32.7
32.7
39.0
39.0
40.0
40.0
40.0
62.0
62.0
62.0
62.0
37.6
37.0
40.0
40.0
31.5
31.5
46.8
40.0
40.0
40.0
40.5
40.5
40.0
40.0
40.0
40.0
40.0
31.5
30.0
40.0
40.0
40.0
30.0
27.5
27.5
30.0
30.0
32.7
32.7
30.0
30.0
32.5
32.5
32.5
43.5
43.5
43.5
43.5
31.4
31.0
30.0
30.0
27.5
27.5
31.0
30.0
30.0
30.0
30.0
30.0
40.0
40.0
32.7
33.4
33.4
27.5
27.5
32.7
40.0
40.0
Weight
(kg)
31.0
22.0
29.5
22.0
22.0
26.3
30.1
22.5
25.4
22.1
25.5
22.1
18.2
18.2
20.9
20.9
13.7
13.8
9.8
12.3
16.4
16.4
28.0
24.0
24.0
27.5
26.7
26.7
32.4
32.5
25.0
30.9
36.3
20.3
24.3
20.0
36.6
42.8
Primary
Free
Camber mm
235
195
195
181
188
164
164
250
250
170
170
170
230
205
235
210
205
185
175
175
211
211
210
194
204
204
222
209
207
275
173
177
177
193
193
173
225
225
Free Camber is measured from top of eye (not centre line) to main leaf at centre bolt. Allow 3mm tolerance either side.
* These springs have a 20mm lower 2nd Stage than other springs in the series.
+ These springs have a 20mm higher 2nd stage than other springs in this series
Page 98
Spring Rate
lbf/in
274 / 571
194 / 388
230 / 570
205 / 450
319 / 581
177 / 616
217 / 662
170 / 457
216 / 616
126 / 531
165 / 571
126 / 411
148
148
137 / 257
137 / 257
188
188
171 / 291
228 / 348
148 / 245
200 / 296
228 / 310
170 / 340
170 / 340
204 / 361
114 / 194
114 / 194
182 / 392
225 / 416
212 / 450
192 / 481
244 / 535
166 / 321
209 / 365
147 / 371
234 / 627
300 / 694
N/mm
48 / 100
34.0 / 68.0
41 / 100
36 / 79
56 / 102
31 / 108
38 / 116
30 / 80
38 / 108
22 / 93
29 / 100
22 / 72
26
26
24 / 45
24 / 45
33
33
30 / 51
40 / 61
26 / 43
35 / 52
40 / 55
30 / 60
30 / 60
35.8 / 63.8
20 / 34
20 / 34
32 / 69
39 / 73
37/79
34 / 84
43 / 94
29 / 56
37 / 64
26 / 65
41 / 110
53 / 122
SPECIFICATIONS
COIL SPRINGS
Spring Number
OME500
OME501
OME502
OME503
OME504
OME505
OME506
OME507
OME508
OME601
OME602
OME603
OME604
OME605
OME606
OME607
OME608
OME609
OME610
OME611
OME612
OME613
OME614
OME615
OME616
OME617
OME618
OME619
OME620
OME621
OME622
OME700
OME701
OME702
OME703
OME720
OME721
OME722
OME723
OME724
OME725
OME743
OME744
OME745
OME746
OME751
OME752
OME754
OME755
OME760
OME761
OME762
OME763
OME764
OME766
X5K
Steel
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Bar Dia.
mm
14.5
15
16
15
14.5
15
15
15
15
18
16
17
17
18
18
17
17
19
20
18
20
20
20
13
14
15
16
14
15
14
14.5
18
19
18.5
19
19
19
19
20
21
22
21
18
19
20
15
17
20
18
15
15
17.5
18
16
16
Free Height mm
A
B
385
385
350
350
350
350
342
342
355
355
330
330
330
330
338
338
315
315
350
350
392
392
410
410
400
400
315
315
320
320
370
370
380
380
440
440
430
430
310
310
415
415
435
435
425
425
510
510
490
490
430
430
435
445
515
515
450
450
520
520
375
375
420
420
425
425
430
430
435
435
420
410
440
430
440
430
450
440
445
435
445
435
360
360
400
400
390
390
370
370
390
380
440
440
435
435
435
435
395
385
400
390
420
410
420
410
430
420
420
420
Number
Of Coils
5.4
7.3
6.0
7.0
5.4
7.3
5.1
5.1
5.6
8.3
8.2
7.0
6.0
7.8
7.8
10.5
10.5
8.0
8.0
7.8
11.0
11.0
11.0
10.0
10.5
7.0
7.75
10.5
9.0
9.5
7.0
8.75
9.5
9.5
9.5
8.9
8.9
7.2
7.2
7.2
7.7
8.6
9.7
9.7
8.6
6.6
9.0
6.9
6.8
9.0
7.5
8.6
7.8
8.0
7.5
Coil weight
Kg
3.5
4.5
4.6
4.1
3.4
4.2
3.5
3.5
3.7
5.5
5.9
6.6
5.7
5.0
5.0
5.8
5.8
7.8
8.7
5.0
9.1
9.1
8.9
3.8
4.6
4.1
5.3
4.6
4.5
4.8
3.5
5.8
7.0
6.6
7.0
9.9
9.9
8.0
8.9
9.9
11.7
8.8
6.7
7.2
8.1
3.9
6.7
8.4
6.6
6.8
4.4
7.0
6.8
5.4
5.1
Spring Rate
lbf / in
N / mm
155
27
175
30.6
245
42.9
185
42.9
155
27
175
30.6
180
31.5
180
31.5
180
31.5
650
113.8
180
31.5
188
32.9
227
39.8
730
127.8
730
127.8
480
84
480
84
390
68
460
80
730
127.08
740
129.6
740
129.6
740
129.6
120
21
135
23.6
160
28
175
30.7
135
24.6
200
35
150
26.3
200
35
625
109
720
126
625
109
720
126
270 / 350
47 / 61
270 / 350
47 / 61
275
48
340
59.5
400
70
440
77
830
145
430
93
670
117
680
119
230
40
270
47
420
73.5
300
52.5
180 - 250
35 - 44
200
35
300 - 340
52 - 60
360
63
220
38.5
250
44
cont.
Page 99
SPECIFICATIONS
COIL SPRINGS
Spring Number
OME767
OME768
OME770
OME776
OME777
OME779
OME780
OME781
OME790
OME791
OME792
OME793
OME794
OME795
OME796
OME797
OME798
OME799
OME802
OME803
OME850
OME851
OME853
OME856
OME859
OME860
OME861
OME862
OME863
OME864
OME865
OME866
OME868
OME870
OME871
OME872
OME873
OME874
OME875
OME876
OME880
OME881
OME882
OME883
OME884
OME885
OME886
OME890
OME891
OME892
OME895
OME895E
OME896
OME897
OME900
X5K
Steel
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Bar Dia.
mm
16
20
16
15
15
16
18.5
17
17
16
14
15
16
16
16
13
13
16
16
16
16.5
16
17
16
16
17
16
17
18
19
17
18
20
14
16
14
16
15
17
14
16
16
17
16.5
16.5
16.5
18
14.5
15.5
17
16.5
17
18
19
15
Free Height mm
A
B
385
375
580
580
480
470
410
390
395
375
385
375
470
460
425
415
378
378
280
280
435
435
350
350
260
255
285
285
255
250
350
350
400
400
353
353
445
445
465
465
495
505
475
485
495
495
465
465
470
470
480
490
480
490
460
470
480
490
480
490
460
460
465
465
480
490
370
355
410
400
400
400
455
455
408
408
440
440
390
375
365
365
375
375
395
395
375
375
390
390
395
395
402
402
435
425
420
410
400
390
390
390
375
375
390
390
390
390
405
395
Number
Of Coils
6.7
11.0
10.0
8.8
8.0
8.0
8.7
7.7
9.4
7.3
9.3
5.2
7.3
6.0
7.3
10.0
10.5
5.5
11.3
10.7
9.0
8.2
11.2
11.0
9.2
6.9
10.4
9.0
7.0
7.2
6.9
9.0
7.1
8.5
7.3
9.0
8.2
9.0
8.3
8.5
10.2
10.2
12.2
9.7
9.7
9.7
11.4
9.7
9.5
8.9
6.8
6.8
6.8
6.8
6.4
Coil weight
Kg
4.5
10.2
8.4
5.2
4.8
4.8
10.0
6.0
6.0
4.0
4.0
3.7
4.2
3.9
4.2
2.6
3.2
4.6
5.7
6.0
7.3
5.3
7.3
6.3
5.3
6.0
7.0
8.0
7.0
7.9
6.0
9.8
11.4
3.7
5.1
4.0
5.7
4.5
6.5
3.7
4.7
4.7
4.7
5.5
5.5
5.5
6.8
5.7
6.4
6.4
4.8
5.4
6.4
7.2
4.1
Spring Rate
lbf / in
N / mm
285
50
450
78.8
260
46
160
28
180
31.5
225
39
250 / 340
44 / 60
290
51
500
87.6
410
72
150
27
165
28.8
420
73.6
360
63
420
73.6
340
59.5
210
36.8
220
38.5
320
56
340
59
220
38.5
220
38.5
275
48.2
230
40
275
48
220
38.5
220
38.5
240
42
250
44
320
56
220
38.5
240 - 300
42 - 52.5
360
63.1
200
35
220
38.5
190
33
200
35
220
38.5
240
42
200
35
500
88
500
88
500
88
590
103
590
103
590
103
660
115.6
190
33
210
37
380
68
260
45.5
260
46
318
55.7
387
67.8
180
31.5
cont.
Page 100
SPECIFICATIONS
COIL SPRINGS
Spring Number
OME901
OME902
OME903
OME904
OME905
OME907
OME908
OME910
OME911
OME912
OME913
OME914
OME915
OME917
OME918
OME919
OME920
OME921
OME922
OME923
OME924
OME925
OME926
OME927
OME928
OME929
OME930
OME931
OME932
OME933
OME934
OME935
OME936
OME937
OME938
OME940
OME941
OME942
OME943
OME944
OME945
OME947
OME948
OME949
OME950
OME951
OME952
OME953
OME954
OME955
OME956
OME959
OME960
OME961
OME962
X5K
Steel
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Bar Dia.
mm
16
18
16
15
17
17
16
17
16
15
15
18
18
21
22
15
14
16
14
16
19
16
16
16
16
16
14
14
14
14
14
14
15
15
18
14
15
15.5
15
15
16
16
16
17
16
15
12
16
12
13
16
16
15
13
16
Free Height mm
A
B
395
385
340
340
380
380
410
410
313
313
370
370
295
295
400
390
400
390
420
420
390
390
330
330
345
345
345
335
338
328
430
430
430
430
385
385
360
360
395
395
340
340
385
385
392
392
394
394
410
410
420
420
475
465
510
500
480
470
495
485
510
500
420
410
420
410
400
400
400
390
380
370
390
375
380
365
370
360
395
385
350
340
340
340
340
340
370
355
300
300
290
290
345
345
285
285
340
340
350
350
330
330
310
310
300
300
340
340
320
320
Number
Of Coils
6.3
8.4
7.3
6.8
6.0
5.3
7.3
7.5
7.5
10.8
9.3
8.2
8.2
7.3
7.3
10.8
8.0
6.8
6.1
6.8
8.2
10.8
10.8
10.3
6.8
10.8
9.8
11.9
11.2
11.2
10.0
9.8
10.0
7.3
7.5
8.6
7.2
6.6
8.6
8.0
7.5
5.8
5.6
7.1
8.5
8.5
11.0
8.5
8.5
10.0
8.5
8.5
8.5
10.0
8.5
Coil weight
Kg
4.6
5.5
5.3
4.4
4.7
5.2
4.5
7.0
7.0
5.6
4.8
5.0
5.5
8.6
9.5
5.7
3.6
5.3
3.3
5.3
6.2
5.4
5.4
5.2
5.0
6.6
3.9
5.1
4.8
4.8
4.0
4.1
4.9
4.3
7.7
3.8
4.4
5.2
4.4
4.5
4.7
4.5
4.3
5.7
4.1
3.6
2.5
4.3
2.2
3.1
2.8
4.1
3.7
3.0
4.1
Spring Rate
lbf / in
N / mm
220
38.5
650
113.8
210
36.8
170
29.8
360
63
213
37.3
368
64.4
150 - 260
26 - 45.5
140 - 230
24.5 - 40
180 - 300
31.5 - 52.5
180 - 300
31.5 - 52.5
650
114
650
113.8
700 - 900
122 - 157
860 - 1000
150 - 175
200 - 280
35 - 49
190
33
200
35
140
24
200
35
790
138
375
65.7
375
65.7
400
70
200
35
240 - 300
42 - 52.5
160
28
140
24.5
140
24.5
140
24.5
160
28
180
31.5
220
38.5
220
38.5
205 - 290
36 - 51
190
33
140
24.5
160
28
230
40.3
190
33
240
42
170
29.8
200
35
216
37.8
540
95
440
77
140
24.5
540
94.5
180
31.5
200
35
500
88
540
94.5
440
77
200
35
540
95
cont.
Page 101
SPECIFICATIONS
COIL SPRINGS
Spring Number
OME963
OME965
OME966
OME967
OME968
OME969
OME970
OME971
OME972
OME972E
OME973
OME974
OME974E
OME975
OME976
OME980
OME981
OME982
OME983
OME984
OME985
OME990
OME991
OME992
OME993
OME994
OMEGQ02A
OMEGQ02AM
OMEGQ02B
OMEGQ02C
OMEGQ02CM
OMEGQ02D
OMEGQ02G
OMEGQ02J
OMEGQ02LP
X5K
Steel
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Bar Dia.
mm
11.5
11.5
12
12
14
12
18
17
16
16
16
16
16
16
16
19
21
19
20
21
21
18
19
17
18
21
18
19
19
18
17
18
19
20
19
Free Height mm
A
B
350
350
365
365
335
315
325
325
370
370
360
360
395
385
405
395
400
385
404
404
415
400
385
370
385
385
425
410
440
425
490
470
480
460
470
450
480
455
480
455
480
460
385
385
365
365
355
345
345
335
335
325
465
465
505
490
445
445
480
465
485
470
480
480
475
460
480
465
475
445
Number
Of Coils
10.0
10.0
9.0
9.0
9.4
9.5
8.0
6.7
6.5
6.5
6.5
6.5
6.5
7.4
7.2
9.0
9.0
9.0
9.0
9.0
7.0
8.9
8.9
7.1
6.6
7.3
9.0
10.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
Coil weight
Kg
2.4
2.4
2.4
2.4
4.0
3.0
6.9
4.5
4.5
4.5
4.5
4.5
5.1
4.9
10.0
10.1
11.2
10.1
11.0
12.3
12.5
5.7
7.1
5.9
6.1
8.4
9.2
8.9
10.3
8.9
7.9
9.2
10.0
11.2
10.0
Spring Rate
lbf / in
N / mm
146
25.6
146
25.6
176
30.8
176
30.8
210
36.8
170
29.8
320
56
320
56
250
44
250
44
250
44
250
44
250
44
220
38.5
220
38.5
250 - 370
43.9 - 64.9
300 - 440
52.6 - 77.2
250 - 370
43.9 - 64.9
300 - 400
52.6 - 70
360 450
63 - 79
470
82.3
530
92.8
630
110.3
240
42
280
49
700/900
125.3/157.6
200
35
220 - 240
38.5 - 42
250 - 280
44 - 49
200
35
170 - 190
30 - 33
200
35
220 - 350
38.5 - 61
280 - 310
49 - 58
250 - 280
44 - 49
X5K MICRO-ALLOYED SPRING STEEL is a new generation high strength spring steel grade
designed to withstand higher operating stresses with superior resistance to sag and
improved toughness and corrosion fatigue properties. These properties are enhanced by
additions of Silicon, Chromium, Vanadium Nickel along with lower Carbon than conventional
spring steel grades.
Page 102
SPECIFICATIONS
OLD MAN EMU POLYURETHANE
SPRING BUSH DIMENSIONS
Dimensions
Part No.
PT229
PT230
PT231
PT231A
PT240
PT260
PT261
PT270
PT280
PT281
PT282
PT283
PT284
PT285
PT290
PT291
PT292
PT293
PT301
PT302
PT303
PT304
PT305
PT306
PT307
PT308
PT309
PT310
PT311
PT312
PT313
PT314
PT315
PT316
PT317
PT318
PT319
PT320
PT321
PT322
PT323
PT324
PT325
PT326
PT328
PT329
PT330
PT331
D1
32.0
32.0
36.0
38.0
36.0
45.0
45.0
50.0
44.0
44.0
52.0
44.0
32.7
32.7
45.0
40.0
40.0
45.0
50.0
40.0
40.0
52.0
43.0
44.0
50.0
46.0
40.0
42.0
52.0
43.0
40.0
44.0
40.0
43.0
52.0
52.0
52.0
44.0
44.0
40.0
40.0
42.0
42.0
42.0
39.0
39.0
54.0
42.0
D2
24.9
24.9
30.0
30.0
30.0
35.0
35.0
40.0
32.7
32.7
40.0
32.7
None
None
31.5
28.0
27.5
31.5
40.0
30.0
29.5
40.0
31.5
31.4
37.6
35.0
30.0
32.6
40.0
31.5
28.0
32.0
32.7
31.5
39.8
39.8
40.0
31.8
31.8
32.0
30.0
33.0
33.0
33.0
30.0
30.0
39.5
33.0
d
15.0
15.0
18.0
18.0
18.0
18.0
15.0
18.0
18.0
18.0
18.0
18.0
16.0
22.0
18.0
16.0
16.0
14.0
16.0
13.0
13.0
19.0
19.0
18.1
18.1
18.1
18.0
20.1
22.2
19.0
16.0
18.0
22.2
22.2
18.0
20.0
18.0
18.0
18.0
18.0
18.0
19.0
19.0
20.1
19.0
19.0
19.0
20.1
Page 103
T
4.5
3.0
3.6
4.0
4.0
5.5
4.0
5.4
5.2
4.5
4.4
5.8
None
None
4.4
5.0
4.2
4.4
6.9
4.4
4.4
4.0
5.5
6.0
6.0
4.0
4.0
4.0
4.5
4.8
5.0
4.5
4.0
5.0
6.0
8.0
9.5
6.5
4.3
4.0
4.5
4.0
4.0
4.0
4.0
4.0
6.0
4.0
L
35.0
35.0
30.0
35.0
48.0
35.0
35.0
35.0
43.0
30.0
30.0
28.5
57.5
60.0
35.0
44.0
34.0
34.0
25.0
25.0
24.5
30.0
35.0
30.0
30.0
35.0
40.5
30.0
30.0
35.0
45.0
40.0
30.0
35.0
43.5
35.5
35.5
31.5
32.7
45.5
35.5
30.0
44.5
30.0
30.0
44.5
30.0
44.5
Number of Splines
9
9
9
9
9
11
9
13
11
11
13
13
0
0
11
9
9
11
13
9
0
9
0
9
0
9
0
0
9
0
0
0
9
0
9
9
9
9
9
9
9
9
9
9
9
9
9
9
APPLICATIONS
NUMERICAL SPRING & SHOCK BUSH
Kit No.
OMESB1
OMESB2
Component Description
spring bush PT260
Qty
6
OMESB6
spring bush PT280
spring bush PT281
spring bush PT282
spring bush PT230
spring bush PT229
spring bush PT240
spring bush PT231
spring bush PT231
2
2
2
4
2
2
4
6
OMESB7
spring bush PT231A
6
OMESB8
spring bush PT290
spring bush PT291
spring bush PT292
shock bush SP1178 / 19
shock bush SP056 (cotton reel type)
shock bush OME066 / 16
shock bush SP092
shock bush SP091
spring bush PT270
sleeve B17S 22 x 16 x 33
spring bush PT301
spring bush PT302
2
2
2
4
2
4
4
4
4
4
6
2
2
2
2
2
4
1
OMESB20
spring bush PT229
6
OMESB21
OMEB27
spring bush PT260
spring bush PT261
spring bush PT301
spring bush PT302
spring bush PT303
sleeve 16 x 13 x 65
sleeve 16 x 13.2 x 33
2
4
2
2
2
1
2
OMESB28
spring bush PT284
2
OMESB29
spring bush PT285 & sleeve
1
OMESB3
OMESB4
OMESB5
OMEB9
OMEB10
OMEB11
OMEB12
OMEB13
OMEB14
OMEB15
OMESB16
OMEB17
OMEB18
OMESB19
OMESB25
To Fit
Toyota 35mm spring eye, 18mm pin OE & OME
Series F/H/B, J/ZJ: 75, 74, 73, 70, 60, 47, 45, 42, 40
Nissan GQ Patrol leaf spring models OME only
Nissan MQ Patrol all models - rear OE spring
Nissan MQ Patrol round headlight models-front OE spring eye
OBSOLETE
Toyota HiLux all models (except IFS front)
Toyota HiLux all models (except SR5 & extra cab rear)
Toyota FJ55 all models front & rear, 45 Series Rear only OE
springs 30mm eye
Mitsubishi Pajero leaf spring models & L200 models
Small eye bush with 19mm bore
Small eye shock mount
Converts large eye 19mm bore to a 16mm bore
Pin 12 x 60 replacement bush
Pin 10 x 60 replacement bush
Small eye with 16mm bore
Large eye with 19mm bore
40mm spring eye for Toyota 75 series rear springs
Large eye tapered bush with sleeve
Converts small eye bush to suit 19mm bore with sleeves
Suzuki Sierra all models except LJ50 front & rear springs
Toyota LandCruiser 40 series 25mm OE spring front & rear.
Toyota 45 series OE front spring only 25mm eye.
LandCruiser 40 series OE 35mm spring eye
when ES01 extended shackles fitted
Suzuki LJ50 front & rear
N41 & N81 being converted for fitment to CJ Jeep and
Cherokee wagon 83 on front bottom mount. Mahindra
front & rear bottom mount.
Nissan MQ Patrol early model (round headlights)
- front spring, front eye (to be fitted with OMESB29)
Nissan MQ Patrol all models
- front spring, rear eye (to be fitted with OMESB28)
cont.
Page 104
APPLICATIONS
Kit No.
OMESB30
spring bush PT261
spring bush PT229
spring bush PT283
4
2
2
spring bush PT292
spring bush PT291
spring bush PT305
sleeve 19 x 14.2 x 81
shock bush OME 066-19MGQ
shock bush 305IY
spring bush PT304
spring bush PT309
spring bush PT231
sleeve 19 x 14.1 x 68
spring bush PT306
spring bush PT307
sleeve 19 x 15 x 73
PT270 spring bush
PT260 spring bush
spring bush LA118
spring bush LA119
sleeve 19 x 14.3 x 91
sleeve 19 x 15 x 70
spring bush LA119
sleeve 19 x 15 x 70
shock bush LRR010
steering stabiliser bush Y2375
spring bush PT308
spring bush PT231A
spring bush PT304
spring bush PT231
sleeve 19 x 14 x 68
spring bush PT310
spring bush PT311
sleeve 22 x 18 x 70
spring bush PT281
spring bush PT314
spring bush PT315
sleeve 22 x 17 x 68
spring bush PT291
spring bush PT292
spring bush PT316
sleeve 22 x 16 x 80
spring bush PT317
spring bush PT318
sleeve 20 x 14 x 86
2
2
2
2
1
2
8
2
2
2
1
4
2
1
4
2
2
4
1
2
6
3
4
4
4
2
2
4
1
4
2
1
2
2
2
1
2
2
2
1
2
4
2
OMESB31
OMEB36
OMESB38
OMEB40
OMEB42
OMESB43
OMESB57
OMESB64
OMESB75
OMESB76
OMESB77
OMEB78
OMESB79
OMESB80
OMESB81
OMESB82
OMESB83
OMESB84
Qty
To Fit
Toyota LandCruiser 45/47 series front spring with 35mm
spring eye and hanger bracket with 15mm pin hole
Nissan MQ Patrol late model (square headlights)
- front spring, front eye (to be fitted with OMESB29)
large eye 19mm bore
All Triton to 1997 and L200 - rear - suits OME
springs only
N101, N22F & N29 Patrol GQ lower mount - rear shock
pin 14 x 70 replacement
Toyota HiLux IFS extra cab & SR5 dual cab models
being fitted with OME18 series spring
Jeep Wrangler - front & rear to suit OE shackles
Nissan Patrol GQ leaf spring cab chassis OME spring - rear
Land Rover series III 88" & 109"
spring & shackle bushes OE replacement - front
Land Rover series III 88" & 109" spring &
shackle bushes OE replacement - rear
Land Rover series III 88" & 109" lower shock bush- rear
Pin 10 x 60mm steering stabiliser mount
LandCruiser F/HJ45, 47 LWB models - OME spring
Holden / Isuzu Rodeo 1 tonne
rear spring to suit OE & OME springs
Nissan Navara 1 tonne
rear spring to suit OE & OME springs
Mazda / Ford 1 Tonne 4x4
1987 on rear spring OE & OME
Mitsubishi Challenger / Montero
rear spring to suit OME19 only
Toyota LandCruiser 79 Series cab chassis & utility model only
suit OME springs only
cont.
Page 105
APPLICATIONS
Kit No.
OMESB85
spring bush PT270
spring bush PT317
spring bush PT327
spring bush PT318
spring bush PT319
sleeve 20 x 14 x 86
spring bush PT307
spring bush PT320
spring bush PT321
sleeve 19 x 15 x 73
spring bush PT322
spring bush PT323
spring bush PT322
spring bush PT323
sleeve 18 x 14 x 69
spring bush PT231
spring bush PT282
spring bush PT310
spring bush PT311
spring bush PT326
sleeve 22 x 18 x 70
spring bush PT326
spring bush PT331
spring bush PT324
spring bush PT325
spring bush PT281
spring bush PT314
spring bush PT333
sleeve 191472
spring bush PT328
spring bush PT329
spring bush PT330
sleeve 19 x 14 x 72
OMESB86
OMESB87
OMESB88
OMESB89
OMESB90
OMESB91
OMESB95
OMESB96
OMESB97
OMESB98
Qty
4
2
2
2
2
1
2
2
2
1
2
2
2
2
1
4
2
2
2
2
1
2
2
2
2
2
2
2
1
2
2
2
1
Page 106
To Fit
Toyota LandCruiser 78 & 79 Series
must be used with OME springs & greasable shackle kit only
Toyota LandCruiser 76 & 78 Series
Rear suit OME springs with OE shackles.
Jeep YJ Wrangler front and rear
Use only with greasable shackle OMEGS11
Toyota Tacoma rear shackle bushes only
Use with OME springs
Toyota Tacoma rear shackle bushes
for OEM shackles
Holden/Isuzu Jackaroo Trooper 1982-92
rear OME spring
Nissan Navara D22 model - rear spring
to suit OE & OME springs
Nissan D40 Navara suits OE shackle
kit only
Nissan D40 Navara suits OME greasable
shackle kit only
Mazda BT50 / Ford Ranger 2006 on
Toyota HiLux 2005 on
to suit OE & OME springs
SPECIFICATIONS
STEERING STABILISERS
Part Number
OMESD01
OMESD02
OMESD11
OMESD16
OMESD17
OMESD21
OMESD22
OMESD23
OMESD24
OMESD30
OMESD31
OMESD32
OMESD33
OMESD34
OMESD35
OMESD36
OMESD40
OMESD47
Upper Mount Type (mm)
Eye with Bush
Eye with Bush & Sleeve
Pin 60 x 9.5
Pin 60 x 9.5
Eye with Bush
Pin 60 x 9.5
Eye with Bush
Eye with Bush
Eye with Bush
Pin 60 x 9.5
Eye with Bush & Mounting Pin
Pin 60 x 9.5
Eye with Bush
Eye with Bush
Lower Mount Type (mm)
Eye with Bush
Pin 60 x 9.5
Pin 60 x 9.5
Eye with Bush
Eye with Bush
Eye with Bush
Eye with Bush
Eye with Bush
Eye with Bush
Eye with Bush
Pin 60 x 9.5
Eye with Bush
Page 107
Open Closed
Length Length
(mm)
(mm)
552
342
655
394
516
308
535
314
622
373
542
340
537
328
454
316
651
417
448
290
577
392
680
440
611
364
575
347
503
311
484
289
499
309
750
510
Mounting Kit No.
142995
No Kit
140276
140276
142387
140504
No Kit
142995
142995
No Kit
No Kit
500555
140953
No Kit
No Kit
140276
500498
142995
No. of
Kits
OME Bush Kit
1
1
1
1
1
OMEB14
1
1
OMEB10 & B32
OMEB10 & B32
1
1
OMEB10 & B32
1
1
1
TORSION BAR FITTING HINTS
TORSION BAR REMOVAL
1. Before removing the original Torsion bars, the vehicle's front and rear
rim to guard measurements must be taken and noted down,
as per image A.
Image A: Ride height is measured from the bottom of the rim to the
wheel arch vertically through the centre of the hub.
A
2. Using either a hoist or axle stands, raise the vehicle so that the front
suspension is off the ground.
3. Image B: After cleaning and lubricating the two adjusting bolts, in the
ADJUSTING BOLT
torsion bar anchor arms, measure and note the amount of thread
protruding through the lock nut.
4. Using only hand tools loosen and remove the adjusting bolts.
5. Remove torsion bar and anchor arm assembly. Slide anchor arm
and dust covers (if applicable) off the torsion bars.
TORSION BAR ANCHOR ARM NUT
B
6. Thoroughly clean the anchor arms, adjusting bolts and dust covers.
TORSION BAR INSTALLATION
7.
Image C: As each OME torsion bar is preset they are marked (LH) and
(RH) and because of this they must only be installed as marked.
LH -to the left hand side.
As viewed from the driver's seat:
RH -to the right hand side.
8. Image D: Where there is a master spline on the torsion bars (shown
C
in white) on installation they must be aligned to the anchor arms.
Where the torsion bars have the same spline sizes at each end,
the torsion bar can be installed with either end to the front.
9. Slide the dust cover (if applicable) over the Old Man Emu torsion bars
and apply grease to all splines and threads.
10. Install the torsion bar and align the anchor arm so the adjusting bolt
D
is just protruding through the anchor nut. If required, the torsion bar
can be rotated one spline at a time to adjust the position of the
anchor arm.
11. Tighten the adjusting bolts so the same amount of thread,
as noted in step 3, protrudes. Install dust covers.
12. Lower the vehicle back onto its wheels and drive a short distance
to settle the front suspension.
Page 108
TORSION BAR FITTING HINTS
TORSION BAR ADJUSTMENT
NB - All torsion bar adjustments must be done with the vehicle raised off the ground and the front
suspension hanging. Do NOT adjust the torsion bars with the vehicle wheels on the ground.
13. Image E: Park the vehicle on level ground and measure the vehicle's rim to guard measurements.
14. Use the torsion bar anchor arm adjusting bolt to raise or lower the vehicle's ride height, also to trim the
vehicle from side to side, to the desired height.
FRONT SUSPENSION DROOP CHECK
15. To maintain good drive shaft, ball joint angles and to stop constant front suspension top out,
it is important to check after adjusting the vehicle's ride height, that the vehicle has enough front
wheel droop.
Generally, a vehicle must have a minimum of 50 to 70mm of downward wheel travel (droop)
16. Image E: Front suspension droop is checked by taking the vehicle's front rim to guard measurement,
while the wheels are on the ground and noting it down.
Image F: Then raise the front until the wheels are off the ground and take another rim to guard
measurement and note it down.
By subtracting the E image measurement from the F image measurement, the amount of droop
will be obtained. Carry out any adjustment that may be required.
17. All vehicles will require a headlight, front end alignment, and tyre pressure check after the fitment of
new torsion bars.
E
Page 109
F
STRUT CARTRIDGE FITMENT INSTRUCTIONS
2
1
3
Installation Procedure:
1 Using a hammer, tap the steel bump cap upward.
2
Remove and discard the bump cap.
3
Shown is the tube cutter used in these instructions. This tube cutter is available through ridgid tools
(www.ridgid.com) Model No. 152. Catalog No. 31642. Capacity 1/4 - 2 5/8 (6-66mm).
4
5
6
4
Using the tube cutter, cut 20-25mm off the top of the strut tube as shown.
5
Remove the shaft assembly and discard.
6
Drain all the remaining oil from the strut tube.
7
9
8
3mm gap
7
Remove the paint from around the top of the strut using abrasive paper.
8
Thread the locking ring into the strut adaptor leaving a 3mm gap as shown.
9
Place the OME Cartridge into the strut tube.
10
12
11
10 Slide the adaptor and locking ring over the cartridge & strut tube.
11 Push the adaptor all the way down until the locking ring is resting on the cartridge.
12 Whilst holding down the adaptor, place 3 small tack welds evenly around the base of the adaptor.
Page 110
STRUT CARTRIDGE FITMENT INSTRUCTIONS
13
15
14
13 Small tack weld shown
14 Remove the cartridge and locking ring
15 Place 3 evenly spaced 20 mm welds around the adaptor.
THIS OPERATION MUST BE DONE BY A COMPETENT WELDER
16
17
18
16 Welded adaptor shown.
17 Paint the adaptor and welds black.
18 Add 15cc of oil to the strut tube.
Note: Oil type is not important. ie. Original oil, engine oil, gearbox oil.
19
20
21
Oil Level
19 Place the cartridge all the way into the strut then lift out to check oil level.
20 The oil level should be between 50 - 100mm up the cartridge.
21 After checking oil level; reinstall the cartridge by firmly tightening the locking ring.
The strut can now be reassembled and installed into the vehicle.
Page 111
RECOMMENDED FITTING TIMES
COIL SPRINGS SYSTEMS
All Coil Spring Models (Except Land Rovers)
2.0 hours
Fitment of 4 Nitrochargers & 4 OME coil springs
Land Rover All Coil Spring Models
2.5 hours
Fitment of all the above plus additional time to remove front shock absorber towers
Torsion Bar Front with Rear Coil Suspension
2.0 hours
Fitment of 4 Nitrochargers, 2 OME coil springs & front torsion bar adjustment
Coil Front with Rear Leaf Suspension
3.5 hours
Fitment of 4 Nitrochargers, 2 OME coil springs & 2 OME Leaf springs
Coil Over Front Strut with Rear Coil Suspension
3.0 hours
Fitment of 2 Nitrochargers, 2 OME struts & 4 OME coil springs
Coil over Front Strut with Leaf Rear Springs
4.0 hours
Fitment of 2 Nitrochargers, 2 Struts, 2 Coils & 2 Leaf Springs
LEAF SPRING SYSTEMS
All Leaf spring Models (Except HiLux)
5.0 hours
Fitment of 4 Nitrochargers, 4 OME Leaf Springs, and U bolts and spring bushes as required
Toyota HiLux All Leaf Spring Models
6.0 hours
Fitment of all the above plus additional work required to strengthen front spring seat mount
Front Torsion Bar with Rear Leaf Spring Models
3.0 hours
Fitment of 4 Nitrochargers, 2 OME rear leaf springs, U bolts, spring bushes and
front torsion bar adjustment
CARTRIDGE REPLACEMENT
Additional work required to install cartridge per strut
0.5 hours
TORSION BARS
Remove and replace a set of Bars (no removal complications)
1.5 hours
Remove and replace a set of Bars (removal complications eg. OE splines corroded)
2.5 hours
MISCELLANEOUS
Caster kits
2.0 hours
Steering stabilisers
0.5 hours
Greasable shackles (complete vehicle set)
2.0 hours
FRONT END WHEEL ALIGNMENT ADJUSTMENTS
Price
Live axle front end
Independent Front End
The above fitting times are only a guide, and additional time may be involved due to vehicle modifications or
pre-existing accessories which can interfere with the fitment of the suspension.
Page 112

Old Man Emu November 2008 Application Catalogue Number 23

Transcription

Similar documents

Where you come to know.

Saebo Evaluation and Treatment Kit

20 Inch Deep Rolling Series iSheet

Upper Shock Mounts Rear Coil-Over Springs AME Front Springs

Sizing Guide

Johnny Tremain by Esther Forbes Objectives

5125 Install.qxd

Project EVO VIII-S Project EVO VIII-S

Service and Repair of Rear Shock Absorbers