purosil

Transcription

purosil

PUROSIL
PUROSIL Silicone Coolant Hose 4-Ply
Part #
70-025
70-031
70-038
70-050
70-062
70-075
70-087
70-100
70-106
70-112
70-125
70-131
70-138
70-150
70-162
70-175
70-187
70-200
70-212
70-225
70-238
70-250
70-262
70-275
70-287
70-300
70-312
70-325
70-338
70-350
70-362
70-375
70-400
70-450
70-500
70-550
70-600
Page 8
Hose ID
inches
mm
0.25
6.35
0.31
7.95
0.38
9.65
0.5
12.7
0.62
15.75
0.75
19.05
0.88
22.35
1
25.4
1.06
27
1.13
28.58
1.25
31.75
1.31
33.35
1.38
35.05
1.5
38.1
1.62
41.15
1.75
44.45
1.88
47.75
2
50.8
2.13
53.98
2.25
57.15
2.38
60.45
2.5
63.5
2.62
66.55
2.75
69.85
2.88
73.03
3
76.2
3.13
79.38
3.25
82.55
3.38
85.73
3.5
88.9
3.63
92.08
3.75
95.25
4
101.6
4.5
114.3
5
127
5.5
139.7
6
152.4
Hose OD
inches
mm
0.62
15.8
0.69
17.4
0.75
19.1
0.87
22.15
0.99
25.2
1.12
28.5
1.25
31.8
1.37
34.85
1.44
36.45
1.5
38.02
1.62
41.2
1.69
42.8
1.75
44.5
1.87
47.55
1.99
50.6
2.12
53.9
2.25
57.2
2.37
60.25
2.5
63.42
2.62
66.6
2.75
69.9
2.87
72.95
2.99
76
3.12
79.3
3.25
82.47
3.37
85.65
3.5
88.82
3.62
92
3.75
95.17
3.87
98.35
4
101.52
4.12
104.7
4.37
111.05
4.87
123.75
5.37
136.45
5.87
149.15
6.37
161.85
Burst Strength
psi*
TMC
477
125
477
125
477
125
425
125
374
125
323
125
297
125
297
125
297
125
297
125
274
125
274
125
274
125
248
125
248
125
224
125
199
100
199
100
175
100
175
100
175
100
149
100
124
100
124
100
87
100
87
100
75
100
75
100
75
100
75
100
49
100
49
100
49
100
n/a
100
n/a
n/a
n/a
n/a
n/a
n/a
TIECO SALES DIRECT LINE : 03 97 57 4949
For heavy duty pressure
connections in hostile
engine environments.
Ideal for extreme
temperatures and
various pressure ranges
where high performance
levels are required.
Temperatures: -65° to 350°F
(-53.9°C to +176.6°C).
Resistant to electrochemical
degradation.
Meets and exceeds all
performance and physical
characteristics of SAE J20
R1, SAE J20 R1 H.T. Class
A, TMC RP303B Grade I and
Grade II, Mil Spec A-A-52426
and various heavy-duty OEM
requirements.
UV and ozone resistant.
Longer service life than 3 ply.
PUROSIL
PUROSIL Silicone Turbo Hose 4-Ply
Part #
670-075
670-100
670-125
670-150
670-175
670-187
670-200
670-212
670-225
670-238
670-250
670-262
670-275
670-300
670-325
670-340
670-338
670-350
670-375
670-400
670-450
670-500
670-600
Hose ID
inches mm
0.75
19.05
1.13
25.4
1.25
31.75
1.5
38.1
1.75
44.45
1.88
47.75
2
50.8
2.13
53.98
2.25
57.15
2.38
60.45
2.5
63.5
2.62
66.55
2.75
69.85
3
76.2
3.25
82.55
3.31
84.1
3.38
85.73
3.5
88.9
3.75
95.25
4
101.6
4.5
114.3
5
127
6
152.4
Hose OD
Burst Strength
inches mm
psi*
TMC
1.07
27.18
323
125
1.32
33.53
297
125
1.57
39.88
274
125
1.82
46.23
248
125
2.07
52.58
224
125
2.2
55.88
199
100
2.32
58.93
175
100
2.45
62.1
175
100
2.57
65.28
175
100
2.7
68.58
149
100
2.82
71.63
124
100
2.94
74.68
124
100
3.07
77.98
87
100
3.32
84.33
75
100
3.57
90.68
75
100
3.63
92.23
75
100
3.7
93.85
49
100
3.82
97.03
49
100
4.07
103.38
49
100
4.32
109.73
n/a
100
4.82
122.43
n/a
100
5.32
135.13
n/a
n/a
6.32
160.53
n/a
n/a
For heavy duty pressure
connections in hostile
engine environments.
Ideal for extreme
temperatures and
various pressure ranges
where high performance
levels are required.
Recommended for temperatures: -65° to 350°F (-53.9°C to +176.6°C).
Resistant to electrochemical degradation.
Meets and exceeds all performance and physical characteristics of SAE J20 R1,
SAE J20 R1 H.T. Class A, TMC RP303B Grade I and Grade II, Mil Spec A-A-52426
and various heavy-duty OEM requirements.
UV and ozone resistant. Longer service life than 3 ply.
WORKING PRESSURE (WP) AND BURST PRESSURE (BP): WP is the maximum pressure the
*
hose should see while in service, including brief pressure spikes or surges. A hose’s published burst
pressure is the value at which a brand new piece of hose will fail at during a one time pressure test.
Hose manufacturers give hoses working pressures and burst pressure. These are typically at a 4:1
ratio (not safety factor) to each other. When choosing a hose for a system, select a hose that is rated
at or above the maximum pressure that can occur in the system.
Page 9
PUROSIL
PUROSIL Silicone Heater Hose Series 80
For heavy duty pressure connections in hostile engine
environments. Ideal for extreme temperature and various
pressure ranges where high performance levels are
required.
Features & Benefits
• Single-braided polyester reinforcement.
• Also available in heavy wall configurations for high pressure applications.
• High burst strength and excellent heat resistance.
• Recommended for temperatures: -65° to +350°F (-53.9°C to +176.6°C).
• Resistant to coolants, cold leaks, cracking, peeling, aging and ozone.
• Meets and exceeds all performance and physical characteristics of SAE J20 R3,
Class A.
Part #
80-025
80-031
80-038
80-050
80-062
80-075
80-088
80-100
Hose ID
inches
mm
0.25
6.35
0.313 7.94
0.375 9.53
0.5
12.7
0.625 15.88
0.75
19.05
0.875 22.23
1
25.4
Hose Wall
inches
mm
0.138
3.51
0.138
3.51
0.157
3.99
0.157
3.99
0.157
3.99
0.157
3.99
0.157
3.99
0.169
4.29
Hose OD
inches
mm
0.53
13.36
0.59
14.95
0.69
17.5
0.81
20.68
0.94
23.85
1.06
27.03
1.19
30.2
1.34
33.99
Also available on Spools:
Part #
80-025-650
80-031-550
80-038-550
80-050-500
80-062-450
80-075-250
80-088-200
80-100-150
Page 10
Spool Size
650 ft
550ft
550 ft
500ft
450 ft
250ft
200 ft
150ft
Burst
Strength (psi)
350
420
482
422
300
275
275
200
SAE
250
250
250
250
250
250
175
175
PUROSIL
PUROSIL Silicone Charge Air Hot Side Connectors
Designed and engineered to provide a connection between engine mounted charge
air system components. Ideal for handling slight misalignments and isolating vibration
between hose ends.
Features & Benefits
• 4 ply silicone aramid reinforced configuration.
• Convolutions increase flexibility in high vibration situations.
• 316 Stainless Steel restraining rings reduce swell and increase hoop strength.
• Recommended for temperatures: -65° to 500°F (-53.9°C to 260°C).
• Fluorocarbon liner available for increased petrochemical combustion residue resistance.
• Combines high performance and economy. UV and ozone resistant.
Part #
Hose ID
Hose OD
Length
inches
mm
inches
mm
inches
367-250-060
2.5
63.5
2.71
69.09
6
367-300-060
3
76.2
3.22
81.79
6
367-350-060
3.5
88.9
3.72
94.49
6
367-400-060
4
101.6
4.22 107.19
6
367-400-070
4
101.6
4.22 107.19
7
367-400-075
4
101.6
4.22 107.19
7.5
367-400-080
4
101.6
4.22 107.19
8
367-400-010
4
101.6
4.22 107.19
10
367-450-060
4.5
114.3
4.71
119.99
6
367-500-070
5
127
5.22 132.59
7
367-500-080
5
127
5.22 132.59
8
66-400-1
4
101.6
4.22 107.19
9.5
Transition CAC Hoses
367-300/350-060
3.00 to 3.50 Inch transition
6
367-300/400-060
6
367-350/400-060
6
367-350/400-070
7
367-400/450-060
6
PUROSIL Flurocarbon Charge Air Hot Side Connectors
Part #
367FC-400-060
367FC-500-060
367FC-500-070
Hose ID
inches
mm
4
101.6
5
127
5
127
Hose OD
Length
inches
mm
inches
4.22 107.19
4
5.22 132.59
4
5.22 132.59
4
Page 11
PUROSIL
PUROSIL Silicone Turbo Joiners
Part #
7001068
7001092
7001093
7001094
7001095
7001096
T202994
Description
62-350 X 3”
670-340 X 3.55”
62-250 X 3”
62-450 X 3”
670-200 X 3.25”
62-300 X 3”
62-338 X 3.55”
Manuf. Ref.
5162888
(D.D.)
202994
(CUM.)
5144041
(D.D.)
5100014
(D.D.)
952979-3
(VOL.)
952986-8
(VOL.)
202994
(CUM.)
PUROSIL Silicone Aramid Turbo Elbows
Features & Benefits
•
4 ply silicone aramid reinforced configuration.
•
Economical for a wide variety of turbocharger applications.
•
Designed and engineered for a wide variety of high temperature turbocharger
applications.
•
Resistant to minor oil splash and petrochemical exposure.
•
Recommended for temperatures: -65° to 500°F (-53.9°C to 260°C).
•
Excellent flexibility.
•
Fluorocarbon liner available for increased
petrochemical combustion residue resistance.
•
Part #
45º TURBO HOSE
3646-275-MK
3646-300-03
3646-350-01
3646-400-01
90º TURBO HOSE
3648-250-14
3648-300-06
3638-350-02
3648-400-03
7001560
Page 12
Hose Leg 1 Leg 2 Inside
Wall
ID
Radius Thickness
inches inches inches inches
inches
2.75
3.0
3.5
4.0
6
6
6
6
6
6
6
6
3.5
4
3.5
4
0.16
0.16
0.16
0.16
2.5
3.0
3.5
4.0
4.0
6
6
6
4
6
6
6
6
4
6
3.00
3.00
4.00
4.00
4.00
0.16
0.16
0.16
0.16
0.20
PUROSIL
PUROSIL Silicone 3641 Series Hot Side
Feature & Benefits
•
Aramid reinforced configuration for fatigue resistance at high temperatures.
•
Recommended for temperatures: -65° to 500°F (-53.9°C to 260°C).
•
Fluorocarbon liner available for increased petrochemical combustion residue resistance.
•
Designed and engineered for a wide variety of high temperature turbocharger applications.
•
Silicone is resistant to extreme temperature conditions.
•
Resistant to minor oil splash and petrochemical exposure.
•
Compensates for misalignment and offsets vibration.
•
•
Long service life.
•
4 ply
Part #
Hose ID
Hose OD
Length
Ply
inches mm inches mm Inches mm
3641-600-600 6.00” 152.4 6.32” 160.4
6”
152.4 4
PUROSIL Silicone 76 Series Coolant/Cold Side
Feature & Benefits
•
Reinforced configuration for fatigue-resistance at high temperatures.
•
Suitable for coolant and cold side turbocharger applications in heavy duty automotive and
marine engines.
•
Recommended for temperatures: -65°F to +350°F (-53.9°C to 176.6°C).
•
Silicon provides excellent high and low temperature resistance.
•
Compensates for misalignment and offsets vibration.
•
•
Special silicone liner resists coolant.
Part #
763-200-5
763-225-7
763-238-7
763-250-7
76-200-5
76-200-6
76-250-7
76-250-10
Hose ID
inches
mm
2.00”
50.8
2.25”
57.1
2.38”
60.3
2.50”
63.5
2.00”
50.8
2.00”
50.8
2.5”
63.5
2.5”
63.5
Hose OD
inches
mm
2.31”
58.8
2.64”
67.0
2.70
68.3
2.81
71.5
2.38
60.5
2.38
60.8
2.90
73.5
2.90
73.5
Length
Inches mm
5 1/8” 130
5 1/8” 130
5 1/8” 130
5 1/8” 130
51/8” 130
6”
152
6”
152
10”
254
Ply
4
4
4
4
4
4
4
4
Page 13
PUROSIL
PUROSIL Silicone Coolant Hose 3-Ply
Part #
Hose ID
inches
mm
7030-062
7030-075
7030-100
7030-112
7030-125
7030-150
7030-175
7030-200
7030-225
7030-250
7030-275
7030-300
7030-350
0.62
0.75
1
1.13
1.25
1.5
1.75
2
2.25
2.5
2.75
3
3.5
15.75
19.05
25.4
28.58
31.75
38.1
44.45
50.8
57.15
63.5
69.85
76.2
88.9
Hose OD
inches
mm
0.95
1.08
1.33
1.46
1.58
1.83
2.08
2.33
2.58
2.83
3.08
3.33
3.83
24.13
27.43
33.78
36.96
40.13
46.48
52.83
59.18
65.53
71.88
78.23
84.58
97.28
Burst Strength
SAE
TMC
J20R1
374
125
323
125
297
125
297
125
274
125
248
125
224
125
199
100
175
100
149
100
124
100
87
100
75
100
PUROSIL Silicone Coolant Flex Hose
Feature Benefits
•
Reinforced configuration for fatigue-resistance at high temperatures.
•
Suitable for coolant and cold side turbocharger applications in heavy duty automotive
•
Recommended for temperatures: -65°F to +350°F (-53.9°C to 176.6°C).
•
Silicon provides excellent high and low temperature resistance
•
Compensates for misalignment and offsets vibration
Part #
99-125-31
99-138-31
99-238-24
99-300-31
Page 14
Hose ID
inches
mm
1.25”
31.75
1.38”
35.05
2.38”
60.3
3.00”
76.2
Hose OD
inches
mm
1.56
39.75
1.70
43.05
2.68
68.3
3.31
84.2
Length
31”
31”
24”
31”
PUROSIL
PUROSIL Silicone 90º Elbows 4-Ply
Part #
90-100-6x6
90-125-6x6
90-150-6x6
90-175-6x6
90-187-7
90-187-9
90-200-6x6
90-200-97
90-200-91
90-200-90
90-200-M2
90-225-6x6
90-238-6x6
90-250-6x6
90-275-6x6
90-275-71
90-300-6x6
90-400-6x6
Coolant elbows designed
Inside
Wall
Radius Thickness to meet high performance
requirements specified
inches inches inches
inches
in various industry
6
6
1.5
0.19
standards.
6
6
1.75
0.19
6
6
2
0.19
Features & Benefits
6
6
1.75
0.19
• 4 ply silicone polyester reinforced
5
9.5
2
0.19
configuration to provide strength
5
8
2
0.19
and flexibility.
6
6
4
0.19
• Silicone liner creates barrier to
4
4.5
4
0.19
isolate medium.
5
8
4
0.19
• Recommended for temperatures:
5
5.5
4
0.19
-65° to +350°F (-53.9°C to
6
9
4
0.19
+176.6°C).
6
6
2.25
0.19
• Custom ply configurations
6
6
2.38
0.19
available to meet flexibility and
6
6
2.5
0.19
burst requirements.
6
6
3.5
0.19
• UV and ozone resistant.
5
12
3.5
0.19
• Meets and exceeds all
6
6
3
0.19
performance and physical
6
6
4
0.19
characteristics of SAE J20 R1,
SAE J20 R1 H.T. Class A, TMC
RP303B Grade I and Grade II,
Mil Spec A-A-52426 and various
heavy-duty OEM requirements.
Hose ID Leg 1
inches
1
1.25
1.5
1.75
1.88
1.88
2
2
2
2
2
2.25
2.38
2.5
2.75
2.75
3
4
Leg 2
PUROSIL Silicone 90º Reducing Elbows 4-Ply
Part #
9049-187/200-01
9049-200/238-2
9044-200/250-MK
Hose
ID
inches
1.87
2
2
Hose
ID
Inches
2
2.38
2.5
Leg 1
Leg 2
inches
3
3
4
inches
3
3
4
Inside
Radius
inches
2
2
2
Wall
Thickness
inches
0.19
0.19
0.19
Page 15
PUROSIL
PUROSIL Silicone 45º Elbows 4-Ply
Part #
9046-100-6x6
9046-125-6x6
9046-150-6x6
9046-175-6x6
9045-175-02
9046-200-6x6
90-200-92
9046-225-6x6
9046-250-6x6
9036-250-01
9046-250-06
9046-275-6x6
9046-300-6x6
Hose
ID
inches
1
1.25
1.5
1.75
1.75
2
2
2.25
2.5
2.5
2.5
2.75
3
Leg 1
Leg 2
inches
6
6
6
6
5.25
6
3
6
6
1
x
6
6
inches
6
6
6
6
5.25
6
3.5
6
6
1
x
6
6
Inside
Radius
inches
1.5
1.75
2
1.75
1.75
2
2
2.25
2.5
2.5
x
2.75
3
Wall
Thickness
inches
0.19
0.19
0.19
0.19
0.19
0.19
0.19
0.19
0.19
0.19
0.19
0.19
0.19
PUROSIL Firewall Silicone Hose
Part #
95-062-2
Hose
ID
inches
5/8”
Leg 1
Leg 2
inches
3
inches
5
Degree
90
Wall
Thickness
inches
0.19
PUROSIL CAC Hump Hose Hose
Part #
66-400-1
Page 16
Hose ID
inches
4
mm
101.6
Hose OD
inches
4.22
Hose
Length
mm
inches
107.19
9.5
Coolant elbows
designed to meet
high performance
requirements
specified in various
industry standards.
Features & Benefits
• 4 ply silicone polyester
reinforced configuration
to provide strength and
flexibility.
• Silicone liner creates
barrier to isolate medium.
• Recommended for
temperatures: -65° to
+350°F (-53.9°C to
+176.6°C).
• Custom ply
configurations available
to meet flexibility and
burst requirements.
• UV and ozone resistant.
• Meets and exceeds
all performance and
physical characteristics
of SAE J20 R1, SAE
J20 R1 H.T. Class A,
TMC RP303B Grade
I and Grade II, Mil
Spec A-A-52426 and
various heavy-duty OEM
requirements.
PUROSIL
PUROSIL Gloss Silicone Hose 4-Ply
Part #
670BLKGL-200
670BLKGL-250
670BLKGL-300
670BLKGL-350
670BLUGL-200
670BLUGL-250
670BLUGL-250X2.5
670BLUGL-300
670BLUGL-350
670REDGL-200
670REDGL-250
670REDGL-300
670REDGL-350
7049-00050
7049-00052
ID Inches
2
2.5
3
3.5
2
2.5
2.5
3
3.5
2
2.5
3
3.5
3
3
ID mm
50.8
63.5
76.2
88.9
50.8
63.5
63.5
76.2
88.9
50.8
63.5
76.2
88.9
76.2
76.2
Length
3ft
3ft
3ft
3ft
3ft
3ft
3ft
3ft
3ft
3ft
3ft
3ft
3ft
4”
4”
Colour
Black
Black
Black
Black
Blue
Blue
Blue
Blue
Blue
Red
Red
Red
Red
Red
Red
BRIGHT RED - VIVID BLUE - BLACK
PUROSIL Gloss Silicone Reducers 4-Ply
Part #
77-175200-4
77-200250-4
77-200300-4
77-225300-4
77-300350-4
7749-00004
7749-00005
ID
Inches
1 3/4”
2 1/2”
3”
3”
3 1/2”
3”
3”
ID mm
44.4
63.5
76.2
76.2
88.9
76.2
76.2
ID
Inches
2”
2”
2”
2 1/4”
3”
2 1/2”
2 1/2”
ID mm Length
50.8
50.8
50.8
57.1
76.2
63.5
63.5
4
4
4
4
4
4
4
Colour
Blue
Blue
Blue
Blue
Blue
Blue
Red
Page 17
PUROSIL
PUROSIL MARINE Silicone 45º Elbows 4-Ply
Part #
945MAR-050-MK
945MAR-062-MK
945MAR-075-MK
945MAR-100-MK
945MAR-125-MK
945MAR-150-MK
945MAR-175-MK
945MAR-200-MK
945MAR-225-MK
945MAR-250-MK
945MAR-275-MK
945MAR-300-MK
945MAR-325-MK
945MAR-350-MK
945MAR-375-MK
945MAR-400-MK
945MAR-450-MK
945MAR-500-MK
9066MAR-500-01
945MAR-600-01
9066MAR-600-01
945MAR-800-01
9066MAR-800-01
945MAR-1000-01
945MAR-1000-01
ID (inches)
0.5
0.62
0.75
1
1.25
1.5
1.75
2
2.25
2.5
2.75
3
3.25
3.5
3.75
4
4.5
5
5
6
6
8
8
10
10
Bore
Large Bore
Large Bore
Large Bore
Large Bore
Large Bore
Large Bore
Large Bore
Plys
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
4
6
4
6
4
Legs
6x6
6x6
6x6
6x6
6x6
6x6
6x6
6x6
6x6
6x6
6x6
6x6
6x6
6x6
6x6
6x6
6x6
6x6
6x6
8.25x8.25
8.25x8.25
10x10
10x10
12x12
Large Bore
6
12x12
• High performance. Meets and exceeds SAE J2006
industry standards.
• Standard leg length 6" x 6" center line to center. Highquality polyester reinforced.
• Recommended for temperatures: -65°F to 350°F (-53.9°C
to 176.6°C).
• Available in large bore up to 10 inch diameter.
Page 18
PUROSIL
PUROSIL MARINE Silicone 90º Elbows 4-Ply
Part #
90MAR-050-MK
90MAR-062-MK
90MAR-075-MK
90MAR-100-MK
90MAR-125-MK
90MAR-150-MK
90MAR-175-MK
90MAR-200-MK
90MAR-225-MK
90MAR-250-MK
90MAR-275-MK
90MAR-300-MK
90MAR-325-MK
90MAR-350-MK
90MAR-375-MK
90MAR-400-MK
90MAR-450-MK
90MAR-500-MK
90MAR-600-01
9068MAR-600-01
90MAR-800-01
9068MAR-800-01
90MAR-1000-01
9068MAR-1000-01
ID (inches)
0.5
0.62
0.75
1
1.25
1.5
1.75
2
2.25
2.5
2.75
3
3.25
3.5
3.75
4
4.5
5
6
6
8
8
10
10
Bore
Large Bore
Large Bore
Large Bore
Large Bore
Large Bore
Large Bore
Large Bore
Plys
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
4
6
4
6
Legs
6x6
6x6
6x6
6x6
6x6
6x6
6x6
6x6
6x6
6x6
6x6
6x6
6x6
6x6
6x6
6x6
6x6
6x6
8.25x8.25
8.25x8.25
10x10
10x10
12x12
12x12
• High performance. Meets and exceeds SAE J2006
industry standards.
• Standard leg length 6" x 6" center line to center. Highquality polyester reinforced.
• Recommended for temperatures: -65°F to 350°F (-53.9°C
to 176.6°C).
• Note: Available in large bore up to 10 inch diameter.
Page 19
PUROSIL
Marine Wet Exhaust - Single Hump
Part #
76SMAR-050
76SMAR-062
76SMAR-075
76SMAR-088
76SMAR-100
76SMAR-125
76SMAR-150
76SMAR-200
76SMAR-225
76SMAR-250
76SMAR-275
76SMAR-300
76SMAR-350
76SMAR-400
76SMAR-450
76SMAR-500
76SMAR-550
766SMAR-600
766SMAR-800
766SMAR-1000
766SMAR-1200
766SMAR-1400
766SMAR-1600
766SMAR-1800
766SMAR-2000
ID (inches)
0.5
0.62
0.75
0.88
1
1.25
1.5
2
2.25
2.5
2.75
3
3.5
4
4.5
5
5.5
6
8
10
12
14
16
18
20
Bore
Large
Large
Large
Large
Large
Large
Large
Large
Plys
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
6
• High performance.
• Meets and exceeds SAE J2006 industry
standards.
• Desired lengths available upon request.
• Available in 4 ply for standard bore and 6 ply for
large bore
• High-quality polyester reinforced.
• Recommended for temperatures: -65°F to 350°F
53.9°C to 176.6°C).
• Note: Available in large bore up to 20 inch
diameter.
Page 20
PUROSIL
Marine Wet Exhaust - Double Hump
Part #
76MDMAR-050
76MDMAR-062
76MDMAR-075
76MDMAR-087
76MDMAR-100
76MDMAR-125
76MDMAR-150
76MDMAR-200
76MDMAR-225
76MDMAR-250
76MDMAR-275
76MDMAR-300
76MDMAR-350
76MDMAR-400
76MDMAR-450
76MDMAR-500
76MDMAR-550
76MDMAR-600
766DMAR-550
766DMAR-600
766DMAR-800
766DMAR-1000
766DMAR-1200
766DMAR-1400
766DMAR-1600
766DMAR-1800
766DMAR-2000
ID (inches)
Bore
Plys
0.5
4
0.62
4
0.75
4
0.88
4
1
4
1.25
4
1.5
4
2
4
2.25
4
2.5
4
2.75
4
3
4
3.5
4
4
4
4.5
4
5
4
5.5
4
6
4
5.5
Large
6
6
Large
6
8
Large
6
10
Large
6
12
Large
6
14
Large
6
16
Large
6
18
Large
6
20
Large
6
• Meets and exceeds SAE J2006 industry
standards.
• Desired lengths available upon request.
• Available in 4 ply for standard bore and 6 ply for
large bore
• Recommended for temperatures: -65°F to 350°F
53.9°C to 176.6°C).
• Note: Available in large bore up to 20 inch
diameter.
Page 21
PUROSIL
Marine Straight Hose
Straight silicone hose for wet exhaust marine applications. SAE J2006 compliant for
reliability and safety. Available in large bore up to 20 inches.
Features & Benefits
Part #
ID (inches)
Plys
70MAR-031
0.31
4
70MAR-038
0.38
4
• Meets and exceeds SAE J2006
70MAR-050
0.5
4
industry standards.
70MAR-062
0.62
4
• Available in 4 ply for standard bore
70MAR-075
0.75
4
and 6 ply for large bore.
70MAR-087
0.87
4
70MAR-100
1
4
70MAR-106
1.06
4
70MAR-112
1.12
4
-65°F to 350°F (-53.9°C to
70MAR-125
1.25
4
176.6°C).
70MAR-131
1.31
4
• Standard lengths: 36" and144".
70MAR-138
1.38
4
Note: Special lengths available
70MAR-150
1.5
4
upon request.
70MAR-162
1.62
4
70MAR-175
1.75
4
70MAR-187
1.87
4
70MAR-200
2
4
70MAR-212
2.12
4
70MAR-225
2.25
4
70MAR-238
2.38
4
70MAR-250
2.5
4
70MAR-262
2.62
4
70MAR-275
2.75
4
70MAR-287
2.87
4
70MAR-300
3
4
70MAR-312
3.12
4
70MAR-325
3.25
4
70MAR-338
3.38
4
70MAR-350
3.5
4
70MAR-362
3.62
4
70MAR-375
3.75
4
Page 22
PUROSIL
Marine Straight
Straight silicone hose for wet exhaust marine applications. SAE J2006 compliant for
reliability and safety. Available in large bore up to 20 inches.
Features & Benefits
• Meets and exceeds SAE J2006 industry standards.
• Available in 4 ply for standard bore and 6 ply for large bore.
• Recommended for temperatures: -65°F to 350°F (-53.9°C to 176.6°C).
• Standard lengths: 36" and144". Note: Special lengths available upon request.
Part #
70MAR-400
70MAR-425
70MAR-412
70MAR-450
70MAR-500
7060MAR-550
7060MAR-600
7060MAR-662
7060MAR-700
7060MAR-800
7060MAR-1000
7060MAR-1200
7060MAR-1400
7060MAR-1600
7060MAR-1800
7060MAR-2000-12
ID (inches)
4
4.25
4.12
4.5
5
5.5
6
6.62
7
8
10
12
14
16
18
20
Plys
4
4
4
4
4
6
6
6
6
6
6
6
6
6
6
6
• Marine Hose: the SAE J2006 "Marine Exhaust Hose" standard which covers the flexible
components of marine engine wet exhaust systems from the connection at the engine
exhaust manifold to the hull or overboard discharge fittings, this includes silicone hose.
This standard calls for the silicone to have properties with greater elongation resistance
and a higher tensile strength compared to the, "Surface Vehicle
• Standard SAE J20 Coolant System Hoses". And so just about any product shape can be
a marine hose, the difference is the material properties required by SAEJ2006.
Page 23
PUROSIL
Marine Flex Hose - Convoluted Smooth Bore
2-ply, flat cover flex hose for wet exhaust
marine applications.
Part #
Marine Flex Hose 2-Ply
Convoluted Smooth Bore
industry standards.
-65°F to 350°F (-53.9°C to
176.6°C).
• Standard lengths: 36” and144”.
Note: Special lengths available
upon request.
Page 24
92MAR-100-144
92MAR-106-144
92MAR-125-144
92MAR-131-144
92MAR-138-144
92MAR-150-144
92MAR-162-144
92MAR-175-144
92MAR-187-144
92MAR-200-144
92MAR-212-144
92MAR-225-144
92MAR-238-144
92MAR-250-144
92MAR-262-144
92MAR-275-144
92MAR-287-144
92MAR-300-144
92MAR-312-144
92MAR-325-144
92MAR-338-144
92MAR-350-144
92MAR-362-144
92MAR-375-144
92MAR-400-144
92MAR-425-144
92MAR-450-144
92MAR-450-475
92MAR-500-475
ID
Ply Standard Lengths
(inches)
1
2
36” or 144”
1.06
2
36” or 144”
1.25
2
36” or 144”
1.31
2
36” or 144”
1.38
2
36” or 144”
1.5
2
36” or 144”
1.62
2
36” or 144”
1.75
2
36” or 144”
1.87
2
36” or 144”
2
2
36” or 144”
2.12
2
36” or 144”
2.25
2
36” or 144”
2.38
2
36” or 144”
2.5
2
36” or 144”
2.62
2
36” or 144”
2.75
2
36” or 144”
2.87
2
36” or 144”
3
2
36” or 144”
3.12
2
36” or 144”
3.25
2
36” or 144”
3.38
2
36” or 144”
3.5
2
36” or 144”
3.62
2
36” or 144”
3.75
2
36” or 144”
4
2
36” or 144”
4.25
2
36” or 144”
4.5
2
36” or 144”
4.75
2
36” or 144”
5
2
36” or 144”
PUROSIL
Marine Flex Hose - Flat Cover Smooth Bore
2-ply, flat cover flex hose for wet exhaust
marine applications.
Part #
Marine Flex Hose 2-Ply
Flat Cover High Dynamic
industry standards.
• High-quality polyester
reinforced.
• Recommended for
temperatures: -65°F to 350°F
(-53.9°C to 176.6°C).
92FMAR-100-144
92FMAR-106-144
92FMAR-125-144
92FMAR-131-144
92FMAR-138-144
92FMAR-150-144
92FMAR-162-144
92FMAR-175-144
92FMAR-187-144
92FMAR-200-144
92FMAR-212-144
92FMAR-225-144
92FMAR-238-144
92FMAR-250-144
92FMAR-262-144
92FMAR-275-144
92FMAR-287-144
92FMAR-300-144
92FMAR-312-144
92FMAR-325-144
92FMAR-338-144
92FMAR-350-144
92FMAR-362-144
92FMAR-375-144
92FMAR-400-144
92FMAR-425-144
92FMAR-450-144
92FMAR-475-144
92FMAR-500-144
ID
Ply
(inches)
1
2
1.06
2
1.25
2
1.31
2
1.38
2
1.5
2
1.62
2
1.75
2
1.87
2
2
2
2.12
2
2.25
2
2.38
2
2.5
2
2.62
2
2.75
2
2.87
2
3
2
3.12
2
3.25
2
3.38
2
3.5
2
3.62
2
3.75
2
4
2
4.25
2
4.5
2
4.75
2
5
2
Standard
Lengths
144”
144”
144”
144”
144”
144”
144”
144”
144”
144”
144”
144”
144”
144”
144”
144”
144”
144”
144”
144”
144”
144”
144”
144”
144”
144”
144”
144”
144”
Page 25
PUROSIL
Basic Hose Dimensions: Images & Descriptions
BEND RADIUS MINIMUM: the
smallest bend radius at which
the hose can be used without it
kinking. The smaller the bend
radius, the greater the material
flexibility.
CHARGE AIR COOLER HOSE (CAC): the
convoluted shape is designed to handle slight
misalignments and to isolate vibration between
hose ends, the rings prevent excessive
expansion from charge air pressure.
TRANSITION or REDUCER DIMENSIONS
LEG LENGTH: this refers to a measurement
on an elbow from the apex of the radius to the
edge of the hose. Elbows sometimes require
one leg longer than the other. The picture
above shows a Leg Length of 6”.
Page 26
PUROSIL
Purosil Hose Clamp Guide
Clamp #
Clamp #
Dia. Range
670 / 90 / 70 Series Hose
80 Series Hoses
90040008
40008
.500 - .907
038
050
90040012
40012
.687 - 1.250
050
062
075
90040020
40020
.937 - 1.750
062
075
087
100 112
125
90040028
40028
1.312 - 2.250
100
112
125
138 150
162
90040036
40036
1.812 - 2.750
150
182
175
187 200
212
225
90040040
40040
2.060 - 3.000
175
187
200
212 225
238
250
90040048
40048
2.582 - 3.500
225
238
250
262 275
287
90040052
40052
2.812 - 3.750
250
262
275
287
90040064
40064
3.562 - 4500
350
400
018 025 038 050
057 062 075
062 075 100
Mission EPDM Hose Clamp Guide
Clamp #
Diameter Ranges
Misson EPDM Series Hose
Z8-30
3.31” (84.0)
3.59” (91.1)
3” ID Hoses
Z8-35
3.81” (96.7)
4.09” (103.8)
3.5” ID Hoses
Z8-40
4.31” (109.4)
4.59” (116.5)
4” ID Hoses
Z8-45
4.81” (122.1)
5.09” (129.2)
4.5” ID Hoses
Z8-50
5.31” (134.8)
5.59” (141.9)
5” ID Hoses
Z8-55
5.94” (150.8)
6.21” (157.7)
5.5” ID Hoses
Z8-60
6.38” (162.0)
6.65” (168.9)
6” ID Hoses
Z8-70
7.38” (187.4)
7.78” (197.6)
7” ID Hoses
Z8-80
8.25” (209.5)
8.56” (217.4)
8” ID Hoses
Clamping Instructions
Worm Gear & Constant Torque
Worm gear or constant torque type stainless steel
clamps with inner liner are recommended for
silicone heater and coolant hose.
Initial clamp torque should be 40 inch-lbs.
If re-torquing is required, it should be limited to 20
inch-lbs.
Do not use serrated, slotted, or wire type clamps.
Recommended bead specifications MS-33660 or
SAE J 1231
Constant torque T-bolt style clamps may help to
retain clamp load.
Torque to 70-75 in - lbs.
Note: For Charge Air Cooler Hose (CAC) use
only T-bolt style clamps. Recommended bead
specifications are MS-33660 or SAE J 1231.
Page 27

purosil

Transcription

Similar documents

Purosil Catalog 2013

Xtreme Silicone Hose for Food Industry

4 PLY High Performance Silicone

distributor catalog

A`fj - McAbee Construction Incorporated