Amberly Accent Chest: Item # 843938 / Model

Amberly Accent Chest: Item # 843938 / Model # M3628828
ASSEMBLY AND CARE INSTRUCTIONS - KEEP ON FILE
4
1
Product
Care&Cleaning Instructions
Amberly Accent Chest: Item # 843938 / Model # M3628828
TWO PEOPLE ARE RECOMMENDED FOR ASSEMBLY.
UNPACK ON A SOFT, SMOOTH SURFACE AND INVENTORY PARTS.
DO NOT USE POWERED TOOLS FOR ASSEMBLY.
DO NOT OVERTIGHTEN ANY CONNECTORS.
PHILLIPS HEAD SCREWDRIVER (NOT PROVIDED) REQUIRED FOR ASSEMBLY.
COMPONENT LIST
Note: Hardware pack & legs are located on shelf inside chest.
1 Two people are recommended for
A. Chest (1 pc)
this step. Lay Chest (A) on its back on a
soft, smooth surface. Attach Feet (B)
to bottom of Chest (A) as shown, by
inserting the bolts into desired
holes on Chest (A). Turn
clockwise to secure.
C
ongratulations. You have selected furniture of the nest quality and ne quality assures lasting furniture. Proper care and cleaning at home will extend the life of your purchase. The
information below o ers important and helpful tips that will enhance your furniture as it ages.
Wood Furniture Care & Cleaning:
· Use a soft, clean, dry cloth that will not scratch the surface when dusting.
· Use of furniture polishes are not necessary. Should you choose to use polishes, test in an inconspicuous area first.
· Using solvents of any kind on your furniture may damage your furniture’s finish.
· Never use water to clean your furniture as it may cause damage to the finish.
· Always use coasters under beverage glasses and flowerpots.
· Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing.
· Direct sunlight may damage wood finishes.
· Extreme temperature and humidity changes can cause warping, shrinking and splitting of wood furniture. It is best to
kkeep furniture in a climate controlled environment.
· Always use protective pads under hot dishes and plates. Heat can cause chemical changes that may create spotting
kwithin the furniture finish.
· Stains or marks from crayons or ink markers will be difficult to remove.
· In the event that your furniture is stained or otherwise damaged during use, we recommend that you call a professsional to repair your furniture.
B. Foot (4 pcs)
HARDWARE LIST
1. Shelf Pin (5 pcs*)
(4 pieces are
preinstalled)
2 Two people are recommended for this step. Turn
2. Wood Screw 5/8"
(5 pcs*)
(4 pieces are
preinstalled)
*Extra hardware
included.
assembled Chest (A) upright. To reposition shelf, open
doors and remove Screws (2), shelf and Shelf Pins (1).
Locate the desired position of the shelf. Re-insert Shelf
Pins (1) into the corresponding holes in the Chest (A).
Replace shelf on Shelf Pins (1). Secure using Screws (2).
Tighten with a Phillips head screwdriver.
Metal Furniture Care & Cleaning:
• Dust with a slightly damp cloth and wipe dry with cloth or paper towel to avoid water spots.
• Do not use abrasive cleaners or harsh chemicals.
• Do not expose to excessive humidity.
3 If leveling is desired, turn levelers
counterclockwise to raise and clockwise
to lower.
4 Install tipping restraint. Installation
instructions are located inside the Tipping
Restraint Kit.
Important: Installation of the tipping
restraint hardware that is included with this
product is recommended to avoid accidental
tipping of the furniture which could result
from improper use. The hardware is only a
deterrent and is not guaranteed to protect
against improper use or as a substitute for
proper adult supervision.
Assembly is now complete.
Thank you for choosing Broadmoore.
Adjustable
Leveler
2
3.4.2014
3