Wall Design Request Form - Outwater Plastics Industries

Wall Design Request Form
This form is for Wainscoting Horizontal wall application only.
Please use Stair Design Request Form for angled stair walls.
Phone: (800) 835-4400, Fax: (201) 498-8775
By providing the requested design information, we will provide you with a detailed wall
panel design, bill of materials list and a price for your project.
Date: __________________________________
Project Name: _______________________________ Project Contact: _________________________________
Address: ______________________________________City_________________State______Zip___________
Daytime Phone: ______________________Fax: _____________________E-mail: _______________________
Dealer Name: Architectural Products by Outwater___Dealer Contact: Tonie Steccato Ext. 3006_______
STEP 1: Define Project Stage.
Wallboard has been applied or is existing.
Room is rough framed.
Thickness of wallboard:
Thickness of finished floor material:
1/2”
3/8”
5/8”
1/2”
other _________
other _________
3/4”
STEP 2: Define Product Scope.
1.
2.
Please specify the following selections with a check mark in the provided box.
Style:
† ClassicTraditional® (Raised panel with beaded rails)
† ClassicAmerican® (Flat panel with beaded rails)
† ClassicModern® (1/8” Revealed flat panel with flat rails)
† ClassicBeadboard® (Beaded design panels with beaded rails)
† ClassicCottage™ (2-tier system 12”x 12” panel above beadboard panel with beaded rails)
† ClassicRustic™ (Hand-carved and scraped panels with matching rails)
Specifications:
ClassicTraditional, ClassicAmerican and ClassicModern
System Height:
Panel Width:
32”
9”
36”
12”
40”
15”
44”
18”
56”
23”
60”
31”
Custom Ht______
Custom_________
32”
36”
40”
44”
69”
73”
104”
ClassicBeadboard
System Height:
108”
Custom________
ClassicCottage
System Height:
48”
56”
Panel Style in Top Tier (Required):
Flat
Raised
ClassicRustic
System Height:
3.
36”
44”
Species & Finishes:
ClassicTraditional, ClassicAmerican, ClassicBeadboard, ClassicCottage and ClassicModern
Species (Option 1): Primed
Oak
Maple
Cherry
Finish:
Unfinished
Natural
Medium
Dark
Custom (submit color swatch for matching)
Species (Option 2):
Finish:
Regal
Premium Cherry
Paprika
Scotch
ClassicRustic
Species: Maple
Finish:
Unfinished
Bridle
Sorrel
Saddle
*Please continue to page 2 of the Wall Design Request Form to complete your design request.
RPX-LT21- 12.23.05
Page 1 of 6
Wall Design Request Form (continued)
Project Name: _______________________________________________Date: _______________________
4.
Baseboard(s):
New England Classic wall systems are provided with a standard baseboard in heights of 4” or 8”
depending on system height. If you choose to use a secondary baseboard in conjunction with New
England Classic baseboard, please check the box below and supply the dimensions requested.
Built-up baseboard (REQUIRED - Enter dimensions below.)
6" - 16"
(VARIES)
4" OR 8" RAIL
BASE
(BY OTHERS)
Thickness (T): ____________
Height (H): ______________
H
T
5.
Casing Option(s) (i.e. door & window trim): Please select one (1) option.
Please supply appropriate New England Classic CasingPak. (4 ½” system)
Owner supplied or already existing casing (REQUIRED - Enter dimensions below.)
T
W
Thickness (T): ____________
Width (W): ______________
STEP 3: Sketch Room Plan and Select Appropriate Project Measuring Guideline.
1. Copy the Design Request & Sketch Sheet for each room.
2. Fill in name of room on each sheet.
3. Please determine project conditions and complete your Project Design in accordance to the Project
Measuring Guideline (#) indicated below.
If Owner is keeping existing casing. Follow Project Measuring Guideline Example #1
If using New England Classic Casing. Follow Project Measuring Guideline Example #2
If Owner is supplying casing which is not currently installed. Follow Project Measuring
Guideline Example #2
If project is in rough framing stage. (No wallboard installed) Follow Project Measuring
Guideline Example #3
STEP 4: Submit to Architectural Products by Outwater.
• Fax all pages to Design Services at (201) 498-8775
or
Outwater Plastics Industries
• Mail to:
Attention: Tonie Steccato
24 River Road
Bogota, NJ 07603
• For further assistance Call : (800) 835-4400
*Please continue to the Wall Design Request Data Chart and Sketch Sheet to complete your design request.
RPX-LT21- 12.23.05
Page 2 of 6
Wall Design Request Data Chart & Sketch Sheet
Print your Project Name to allow Design Services to track Sketch Sheet information
to the proceeding Design Request Form data sheet.
Project Name: ________________________________
General Notes:
Date: _______________________________________
DOOR = D
WINDOW = W
HEATER = H
OTHER = O
ITEM
D
W
H
UNIT SIZE
O
WIDTH
HEIGHT
CASING-DIMENSIONS
WINDOW
REQUIRED IF NEW OR
SILL/JAMB
REPLACING CASING
HEIGHT
WIDTH
REVEAL
1
2
3
4
5
Room Name: ________________________
Design Sketch Area:
*Please make a copy of Wall Design Request & Sketch Sheet for each room.
RPX-LT21- 12.23.05
Page 3 of 6
Wall Design Request Data Chart & Sketch Sheet
Print your Project Name to allow Design Services to track Sketch Sheet information
to the proceeding Design Request Form data sheet.
Project Name: ________________________________
General Notes:
Date: _______________________________________
DOOR = D
WINDOW = W
HEATER = H
OTHER = O
ITEM
D
W
H
UNIT SIZE
O
WIDTH
HEIGHT
CASING-DIMENSIONS
WINDOW
REQUIRED IF NEW OR
SILL/JAMB
REPLACING CASING
HEIGHT
WIDTH
REVEAL
1
2
3
4
5
Room Name: _________________________
Design Sketch Area:
*Please make a copy of Wall Design Request & Sketch Sheet for each room.
RPX-LT21- 12.23.05
Page 4 of 6
Project Measuring Guideline Examples
#1 - Project with Existing Casing & Wallboard Installed
Follow these guidelines and record your measurements on the sketch
sheets & chart provided. Start with one wall and then repeat for each wall.
D = DOOR
W = WINDOW
UNIT SIZE
HEIGHT
7'-1"
1'-9 1/4"
5'-3"
0'-9"
WIDTH
REVEAL
7'-1"
W IN D O W
1
2 '-1 3 /4 "
3 '-1 3 /4 "
5'-2 3/4"
3 '-8 1 /2 "
2
MEASURE
TO EDGE
Measuring to Existing Casing Example
5'-3"
10'-11"
1 '-9 1 /4 " T O
BOTTOM OF
W IN D O W S IL L
2'-10"
WINDOW
FRAME
CASING
WALL
3'-8 1/2"
WINDOW
HEATER
3
1'-113/4"
3'-6"
HEIGHT
3'-6"
3'-6"
CASING -DIM REQUIRED
IF NEW OR REPLACING
CASING
Project Data Chart Example
DOOR
1'-91
4" Bottom of
Window Sill
7'-1"
2'-3"
WIDTH
WINDOW
SILL/FRAME
2'-10"
ITEM
H = HEATER
1. Measure overall length of walls.
O = OTHER
2. Measure from wall corner(s) to outside edge of existing casing on
D
W H
O
windows, doors & other items that could interfere with wall
1
9
2 9
paneling (Do not include switches & outlets). Repeat process
3
9
for each wall elevation.
3. Measure width of window & door openings from outside edges of 4
5
casing.
4. Measure sill height from bottom of sill to finished floor.
5. Measure height of window & door openings from outside edge of casing
to finished floor.
6. Enter dimension information into project data chart.
7. Sketch project, dimension and label items.
8. See examples below for guidance.
9 '-0 "
Project Sketch Dimensioned to Existing Casing
#2 - Project with No Casing or Replacing Existing Casing & Wallboard Installed
UNIT SIZE
WIDTH
WINDOW
SILL/FRAME
HEIGHT
3'-0"
3'-0"
6'-6"
5'-3"
0'-9"
HEIGHT
CASING -DIM REQUIRED
IF NEW OR REPLACING
CASING
WIDTH
REVEAL
0'-4"
0'-4"
0'-1/4"
0'-1/4"
1'-10"
6'-6"
Project Data Chart Example
WINDOW
3'-0"
2'-10"
1
2'-6"
3'-6"
2'-6"
3'-0"
Measuring to Unit Inside Frame- No Casing
RPX-LT21- 12.23.05
MEASURE
TO INSIDE
EDGE
2
9'-0"
5'-3"
HEATER
10'-11"
1'-10" TO
TOP OF WINDOW
FRAME
2'-10"
WINDOW
FRAME
WALL
2'-4"
WINDOW
3'-0"
3
DOOR
6'-6"
1'-10" Top of
Window Frame
5'-7"
D = DOOR
1. Measure overall length of walls.
ITEM
W = WINDOW
H = HEATER
2. Measure from wall corner(s) to uncased frames on windows,
O = OTHER
doors & other items that could interfere with wall paneling (Do
D
W H
O
not include switches & outlets). Repeat process for each wall
1
9
2 9
elevation.
3
9
3. Measure width of window & door openings from uncased frame
4
openings.
5
4. Measure sill height from top of window frame to finished floor.
5. Measure height of window & door openings from uncased frame to finished floor.
6. Enter future casing & reveal width into project data chart.
7. Enter dimension information into project data chart.
8. Sketch project, dimension and label items.
9. See examples below for guidance.
Project Sketch Dimension to Unit Inside Frame
Page 5 of 6
Project Measuring Guideline Examples
#3 – Project at Rough Framing Stage with no wallboard installed
Follow these guidelines and record your measurements on the sketch
sheets & chart provided. Start with one wall and then repeat for each wall.
1. Measure overall length of walls.
2. Measure wall corner(s) to inside edge of rough opening (RO) for windows, doors & other items that could interfere
with wall paneling (Do not include switches & outlets). Repeat process for each wall elevation.
3. Measure width of window & door rough openings (RO).
4. Measure sill height from sub floor to inside top edge of sill rough opening.
5. Measure height of rough opening for window & door openings, from sub floor to bottom of header.
6. Enter dimension information into project data chart.
7. Enter future casing width & reveal width to be applied or installed.
8. Sketch project, dimension and label items.
9. See examples below for guidance.
D = DOOR
W = WINDOW
H = HEATER
O = OTHER
ITEM
D
1
2
3
9
W
H
UNIT SIZE
O
9
9
WIDTH
WINDOW
SILL/FRAME
HEIGHT
3'-0"
3'-0"
6'-6"
5'-3"
0'-9"
6'-6"
HEIGHT
1'-10"
CASING -DIM REQUIRED
IF NEW OR REPLACING
CASING
WIDTH
REVEAL
0'-4"
0'-4"
0'-1/4"
0'-1/4"
4
5
Project Data Chart Example
W IN D O W
O P E N IN G
W ALL
F R A M IN G
M EASURE
T O IN S ID E
EDGE
1
3'-0"
3'-6 1/2"
Measuring Rough framing- Window
RPX-LT21- 12.23.05
9'-1"
5'-3"
HEATER
11'-0"
1'-10" TO
TOP OF WINDOW
FRAME
2'-10 1/2"
3'-0"
2
2'-4 1/2"
3'-0"
3
DOOR
1'-10" Top of
Window Frame
6'-6"
5'-7 1/2"
2'-6 1/2"
2'-10 1/2"
WINDOW
Project Sketch Dimension to Unit Inside Frame
Page 6 of 6