drupa mycatalog 2004

Transcription

www.glasstec-online.com
MyCatalog glasstec
Personal Guide For:
Email : Product category: 05 - Measurement, testing and control technology
Messe Düsseldorf GmbH
Postfach 101006
40001 Düsseldorf
Germany
Tel. +49 (0)211 / 45 60-01
Fax +49 (0)211 / 45 60-668
www.messe-duesseldorf.de
© 2004
2004Messe
MesseDüsseldorf
Düsseldorf
©
Search Criteria:
-
Exhibitors with address and hall location
Hall map for each exhibitor
News / Product News
Product groups with descriptions and illustrations
glasstec
glasstec
International Tradefair with Special Show + Symposium glass technology live
MyCatalog
MyCatalog
TABLE OF CONTENTS
Exhibitor Overview ............................................................................ 1511 - 1560
Advanced Control Solutions, Inc. .............................................................. 1511
Agr International, Inc. ................................................................................ 1512
BBULL Technology, Stratec Control-Systems GmbH ............................... 1513
Bentrup Industriesteuerungen ................................................................... 1514
Blaumann S.a.s. di Benedetti Laura & C. .................................................. 1515
Bock Energietechnik .................................................................................. 1515
boraglas GmbH, Nanotechnologies in Glass ............................................ 1516
Busch und Spreen GmbH ......................................................................... 1517
Buss & Partner GmbH ............................................................................... 1518
C.M.S. Group ............................................................................................ 1519
Dow Corning GmbH .................................................................................. 1519
Dr. Schenk GmbH, Industriemesstechnik ................................................. 1520
Easy Automation S.r.l. ............................................................................... 1521
EDGETECH Europe GmbH ...................................................................... 1521
Eurotherm Deutschland GmbH ................................................................. 1522
FC S.r.l. ..................................................................................................... 1522
Forvet S.r.l. ................................................................................................ 1523
Fraunhofer-Institut für Silicatforschung ISC .............................................. 1523
Gedevelop AB ........................................................................................... 1524
Glass Service Inc. ..................................................................................... 1524
GlasStress Ltd. .......................................................................................... 1525
Graphikon GmbH ...................................................................................... 1526
Grenzebach Maschinenbau GmbH ........................................................... 1527
Helantec GmbH ......................................................................................... 1528
ICS Inex Inspection Systems .................................................................... 1528
ilis GmbH ................................................................................................... 1529
IMPAC Infrared GmbH .............................................................................. 1529
IRIS Inspection Machines ......................................................................... 1530
ISRA SURFACE VISION GmbH ............................................................... 1531
JENOPTIK Surface Inspection GmbH ...................................................... 1532
JSJ Jodeit GmbH ...................................................................................... 1533
© 2004 Messe Düsseldorf
1510
glasstec
glasstec
MyCatalog
Land Instruments GmbH ........................................................................... 1534
Linde AG, Linde Gas Division ................................................................... 1534
LISEC GROUP .......................................................................................... 1535
LWN Lufttechnik GmbH ............................................................................. 1536
MARPOSS GmbH ..................................................................................... 1537
MSC Inspection Worldwide ....................................................................... 1537
Nedo GmbH & Co. KG .............................................................................. 1538
Nirvana Technologies (P) Ltd. ................................................................... 1539
Optische On-line-Sensoren OPOS ........................................................... 1539
Optische Prüfsysteme Dr. Günther ........................................................... 1540
OSAI S.p.A. ............................................................................................... 1541
PDH Computersysteme GbR .................................................................... 1542
Precitec Optronik GmbH ........................................................................... 1543
Prodim International BV ............................................................................ 1543
Raute Precision Oy ................................................................................... 1545
Raytek GmbH ............................................................................................ 1545
RESIM® .................................................................................................... 1547
Rohmer + Stimpfig Maschinen- und Apparatebau GmbH ......................... 1548
Saveway GmbH & Co. KG ........................................................................ 1549
Schlemmer Prozess Systeme GmbH ........................................................ 1549
SGCC ........................................................................................................ 1550
Siemens AG, Automation and Drives ........................................................ 1551
Socabelec S.A. .......................................................................................... 1551
Software & Technologie Glas GmbH ........................................................ 1552
Solartron Deutschland GmbH ................................................................... 1553
SYMPLEX Vision Systems GmbH ............................................................ 1553
Torgauer Maschinenbau GmbH ................................................................ 1554
VERTECH' Sarl ......................................................................................... 1555
Viprotron GmbH ........................................................................................ 1556
VMA - Gesellschaft für visuelle Messtechnik und Automatisierung mbH .. 1557
WITT-Gasetechnik GmbH & Co KG .......................................................... 1558
XPAR Vision B.V. ...................................................................................... 1558
Z. Bavelloni S.p.A. ..................................................................................... 1559
Fairground Map ............................................................................................ 1561
Hall Map ............................................................................................ 1562 - 1570
MyCatalog
Advanced Control Solutions, Inc.
Address 8750 Resource Park Drive
43560 Sylvania, Ohio
USA
Telephone 0001-419-843-4820
Fax 0001-419-843-4821
Internet Address www.acsitoledo.com
EMail [email protected]
Booth Hall 13 E17
PRODUCT OVERVIEW
02.13.02 Software
05.01.05 Control and automation technology
05.03.04 Process control systems
06 Contracting, consulting, engineering
PRODUCT DETAILS
Process Control Systems
ACSI has more than 75 container and tableware installations. These
applications include lead crystal, borosilicate and soda lime production. The
systems cover all areas of the process
Link zu weiterer Information
http://www.acsitoledo.com/ACSIwebsite/HTML/index.htm
1511
glasstec
glasstec
Agr International, Inc.
Address 615 Whitestown Road
16001 Butler, PA
USA
Telephone 0001-724-482-2163
Fax 0001-724-482-2767
Internet Address www.agrintl.com
Booth Hall 12 C50
PRODUCT OVERVIEW
05.01.01 Measurement and control
05.01.01.04 Measurement and control of glass thickness
05.01.02 Measurement, control and inspection technology
05.01.02.01 Surface, contour and imperfection measurement and control
05.01.03 Measuring devices to be used on site
05.02.04 Controls for glass inspection machines
05.03.02 Inspection, protocolling and diagnostic systems
PRODUCT DETAILS
Twist Check
MyCatalog
MyCatalog
Performs a variety of torque-related tests with one system
Verifies capping head performance
Tests cap torque without breaking the seal or losing carbonation.
The Twist Check analyzer is a high-precision, automatic testing instrument
designed to determine the force associated with the removal or application
of a container cap or closure.
The Twist Check can automatically perform a wide variety of
industry-specific tests including:
Features
Multiple test modes
Automatic peak torque latching
Removal and reapplication capabilities
One-touch, hands-free testing
Simple keypad programming
Automatic testing and
Finish Coating Measurement System
Detect the presence of coatings in the finish region.
Measure coating thickness with a fast, reproducible, and repeatable
method.
Identify coating problems
The Finish Coating Measurement System is a precision testing instrument
designed to quickly and accurately identify the presence and concentration
of metallic coatings on the finish region of a glass container.
Features
Optimised head design for measuring intricate finish regions
Automatic head positioning
Touch screen operation
Ability to measure tin or titanium dioxide coatings
Automated fluid pump
Fill Height Tester
1512
glasstec
glasstec
Eliminates the need for manual fill height measurement
Improves testing reproducibility and repeatability
Measures fill height and brimful in one operation
The Fill Height Tester is a precision testing instrument designed to
automate the task of volume and brimful measurement.
With the touch of a button, the Fill Height Tester automatically performs:
Features:
One-step testing
Temperature and water density compensation
User-defined fill height volume
Robust, at-the-line design
Fill Height Volume
Brimful
Weight
BBULL Technology, Stratec Control-Systems GmbH
Address Ankerstraße 73
75203 Königsbach-Stein
Germany
Telephone 0049-7232-4006-0
Fax +49-7232-4006-25
Internet Address www.bbull.com
Booth Hall 13 C76
PRODUCT OVERVIEW
05.01 Measurement and control technology, sensoring
PRODUCT DETAILS
SYMPLEX HEXKON
MyCatalog
MyCatalog
Seal Face- /Closure Wall Inspection
-PLANITY MEASUREMENT AT THE FINISH SURFACE
CLOSURE WALL AND THREAD INSPECTION--Detection of dip and saddle defects as well as defects in the closure wall /
thread area
--Measurement precision down to +/- 0,01 mm on 360° of the finish area
--Inspects container heights from 40 mm to 420 mm and diameters from 25
mm to 170 mm
Inspects all types of Twist-off and Press-on-twist-off finishes with diameters
from 25 mm to 80 mm (optional up to
110 mm)
Advanced LED lighting methods allow to inspect transparent containers white, green, brown and blue (other colours on request)
--Long-time production data storage and detailed statistical evaluation
options
--Minimum space requirements. Supports production speeds up to 350
C/min
--Software-guided changeover procedures via touch screen
--Remote maintenance / network
-INSPECTION TASKSReliable product quality is the key issue in modern container production.
80-88% of all customer complaints result from flaws in the finish / finish wall
area and from the transition between wall and base. Therefore, BBULL
TECHNOLOGY offers SYMPLEX HEXKON, the first online inspection
machine that controls the finish / finish wall areas on 100% of the produced
containers.
SYMPLEX HEXKON offers:
--Planity inspection of the seal face
--Inspection of the finish wall area including the thread area
We use the latest hardware and software developments to achieve the best
possible result. The system can detect dip and saddle defects with a
metering precision of +/- 0,01mm. In comparison: common tests can only
measure steps of 0,10 mm. Using SYMPLEX HEXKON ensures that the
manufactured containers leave the production line in best quality.
http://www.bbull.de/binternet/englisch/d1Frames_ohne_e/lfo.Pro.Details_e/lcfo.Neuglas._e/d1fo.Neuglas._e.htm
SYMPLEX MULTIKON-NCI
1513
glasstec
glasstec
MyCatalog
Inspection Technology for the Container Glass Industry
--Mould number reading
-FULL SURROUND CONTROL 360 DEGREES-
INSPECTION MODULES
Maximum reliability regarding the product quality is every producers main
concern. Using the new camera inspection system multikon-nci (new
container inspector) this reliability will finally materialise. This multistation
assembly is a combination of all our high-level inspection solutions.
The available inspection modules comprise a constantly widening range of
inspection functions. If you can not find your required function in the list
below, please feel free to contact us directly. We might already be working
on exactly the feature you need.
MULTIKON-NCI comes packed with state of the art camera technology, a
custom-tailored high performance controller, variable image processing
units and an easy user interface. Furthermore, the machine applies a
unique lighting concept allowing picture acquisition of unsurpassed quality.
Special transport components make an allround inspection of the specimen
possible. Therefore, MULTIKON-NCI even inspects the base of the
containers from below. Despite all these features, MULTIKON-NCI is still
one of the most compact systems on the market. It can be placed at spots
where similar machines do not fit in.
For the new container inspection we offer the following single features:
To guarantee best possible inspection results we apply the latest
technological advances in hardware and software. Depending on the
configuration, the machine detects defects in every area of the specimen,
be it dimensional deviations, stress problems or enclosures. Combining all
inspection features, you can make sure that the produced containers leave
your line with optimum quality.
http://www.bbull.de/binternet/englisch/d1Frames_ohne_e/lfo.Pro.Details_e/lcfo.Neuglas._e/b1fo.Neuglas._e.htm
SYMPLEX SIMKON
Inspection Technology for the Container Glass Industry
SYMPLEX MULTIKON is a modular built system which can be built up both
as complete system (SYMPLEX MULTIKON- NCI) and subsystem
(SYMPLEX SIMKON).
The inspection modules of SYMPLEX SIMKON are based on components
which are also used at the SYMPLEX MULTIKON-NCI. Merely the complex
bottle handling can be abandoned.
The SYMPLEX SIMKON without bottle handling offers the following
inspections:
--Sidewall- and sidewall-stress-inspection > SIMKON-SW
--Dimension inspection > SIMKON-DW
--Finish inspection > SIMKON-FIN
The MULTIKON-NCI with bottle handling expands the function as follows:
--Base- and base-stress-inspection
MyCatalog
--Side wall control finding stones, blisters, enclosures and cosmetic defects
--Side wall stress control finding tensions
--Finish control to detect surface defects, over-press finishes and others
--Dimension control finding deviations from the usual contour
http://www.bbull.de/binternet/englisch/d1Frames_ohne_e/lfo.Pro.Details_e/lcfo.Neuglas._e/c1fo.Neuglas._e.htm
Bentrup Industriesteuerungen
Address Zum Buchwald 4
35463 Fernwald
Germany
Telephone 0049-6404-9144-0
Fax +49-6404-9144-11
Internet Address www.bentrup.de
Booth Hall 9 G20
PRODUCT OVERVIEW
PRODUCT DETAILS
professional controls TC405, TC405/30 and TC605
Our professional controls TC405, TC405/30 and TC605 define a new
standard of reliability and overfiring protection. Built-In safety circuits,
extended self-tests, and many different check algorithms developed over
years, providing the maximum protection for your kiln and product. Simple
1514
glasstec
glasstec
MyCatalog
in use, the control supports you on entering the firing curves and prevents
you from programming erroneous data. You will be surprised how soon you
feel confident with your controller ! The numerous features of our
professional series are convincing: All firing curves are absolutely user
definable throughout numerous programmes (both fixed and user
definable), highly-precise temperature- and programme process display,
power breakdown protection, power consumption counter, keyboard lock,
printer output, cooling ramp and many more.
Blaumann S.a.s. di Benedetti Laura & C.
Address Via Vergnano, n° 16
25125 Brescia
Italy
MyCatalog
Qualità ed affidabilità passano anche da un attenta qualificazione dei
prodotti e da frequenti visite alle linee di produzione. La qualificazione dei
vari modelliinclude la verifica dell effettiva prestazione, senza accontentarsi
di riportare distrattamente quanto il produttore dichiara. Anche se gli articoli
proposti non sono generalmente articoli da prezzo il rapporto
prestazione/costo risulta senz altro interessante, considerando come costo
quello effettivo della telecamera una volta installata. Elemento cardine di
tutti gli articoli è il supporto tecnico, sia di pre vendita che di post vendita,
garantito da un adeguato staff di tecnici che sono in grado di rispondere
tempestivamente a tutte le domande, interfacciandosi eventualmente in
modo diretto con i produttori.
Bock Energietechnik
Telephone 0039-030-35310-40
Fax 0039-030-35385-04
Internet Address www.tecnosens.it
Booth Hall 12 B25
Address Gösen 15
92685 Floss
Germany
Telephone 0049-9603-1295
Fax +49-9603-2995
Internet Address www.bock-energietec.de
PRODUCT OVERVIEW
PRODUCT DETAILS
Prodotti
L intera gamma delle telecamere e videoregistratori trattati si caratterizza
per l elevato livello di affidabilità. L obbiettivo che ci si pone è fornire
prodotti con un tasso di difettosità infantile pari a zero, scopo che viene
raggiunto anche testando nei nostri laboratori il 100% dei prodotti prima
della spedizione. I vari articoli hanno differenti prestazioni e possono
essere ideali per specifiche applicazioni, ma non è in ogni caso tollerabile
che un prodotto, per il fatto di essere compatto o con prestazioni contenute,
possa essere poco affidabile, come spesso il mercato vuole far credere:
questo è in deciso contrasto con lo scopo di un articolo di sicurezza.
Booth Hall 13 A45
PRODUCT OVERVIEW
01.04 Glass melting technology
01.04.02 Forehearth technology
01.04.03 Smelting technology for tank furnaces
01.04.06 Recuperative systems
01.04.07 Electric heating systems
01.09 Kiln technology
01.09.03 Annealing lehrs, continuous/ intermittent operation
01.09.04 Decorating lehrs
01.09.05 Pre-heating furnaces
1515
glasstec
glasstec
MyCatalog
PRODUCT OVERVIEW
05.01.01.01 Measurement and control of glass position detection
02.05.02 Laser-marking technology
05.01.01.05 Measurement and control of glass temperature
02.05.05 Components and accessories (Laser technology)
05.03 Host computer systems
05.03.01 MRP / CAD / CIM systems
MyCatalog
02.07 Electronic display glass technology
02.09 Safety glass technology
02.13 Suppliers for the glass machinery industry
02.13.01 Components and accessories (suppliers to the glass machinery industry)
03.01.01 Float and mirror glass
03.02.01 Tempered glass
03.03 Automotive glass
PRODUCT DETAILS
Glasstandmessung radiometrisch
Das Prinzip beruht auf der Schwächung einer Gammastrahlung beim
Durchdringen einer Materie. Die Messeinrichtung besteht aus Strahler,
Szintillationszähler und elektrischer Auswertung.
Das Messsignal steht als Industriesignal 0/4 ... 20 mA für +/- 10 mm
Glasbaddifferenz zur Verfügung. Die Messgenauigkeit liegt bei +/- 0,1 mm.
Der besondere Vorteil liegt in der hohen Messgenauigkeit und in der
Langzeitstabilität dieses Messprinzips.
Die Messeinrichtung ist wartungsfrei, stabil gegen mögliche Störungsflüsse
wie Temperatur, Vibrationen, Staub etc. Speziell dafür konstruierte
Aufnahmen und Befestigungseinrichtungen ermöglichen eine leichte
Montage und Inbetriebnahme.
03.04 Solar technology
03.11.01.04.04 Nano coating technology
03.11.03.01.06.02 Coating of automotive glass
03.11.03.01.06.03 Coating of flat glas
03.11.03.02.07 Precious metal preparations
03.11.03.02.11 Printing techniques
03.11.03.02.13 Creative glass products (glass art)
05.01.04 Detectors for laminated glass
PRODUCT DETAILS
boraglas GmbH, Nanotechnologies in Glass
Address Weinbergweg 23
06120 Halle/Saale
Germany
Telephone 0049-345-5559-946
Fax +49-345-5559-656
Internet Address www.boraglas.de
EMail
boraglas- sidetest
Das Problem:
Herstellungsbedingt weist Floatglas an seinen beiden Oberflächen eine
unterschiedliche chemische Zusammensetzung auf. Dies ist visuell nicht
feststellbar, führt aber zu unterschiedlichen Eigenschaften und
unterschiedlichem Verhalten bei sehr vielen Bearbeitungs- und
Veredelungsprozessen. Als Beispiele seien die Rißbildung und
Benetzbarkeit sowie das Verhalten beim Aufbringen von Beschichtungen
und beim Ionenaustausch, aber auch bei der Bauschlußreinigung von
Einscheibensicherheitsglas aufgeführt.
Booth Hall 11 D12
1516
glasstec
glasstec
MyCatalog
Aufgrund der unterschiedlichen Eigenschaften der Glasoberflächen ist es
erforderlich, die Seiten zu identifizieren, um insbesondere bei
automatisierten Herstellungsverfahren, bei denen Floatglas hergestellt bzw.
weiter verarbeitet wird, eine optimale Qualitätssicherung zu erreichen.
Die Lösung:
Das Seitentestgerät "boraglas® - Sidetest" ist ein Messgerät zur
vollautomatischen Identifizierung von Bad- bzw. Luftseite von Floatgläsern.
boraglas® - Sidetest ermöglicht:
eine einfache, genaue und schnelle Identifizierung von Bad- und Luftseite
durch eine automatische Messung,
unabhängig von subjektiven Fehlern, und integriert in automatische
Produktionsprozesse.
Busch und Spreen GmbH
Address Rudolf-Diesel-Straße 29
31582 Nienburg
Germany
Telephone +49 (0) 5021-9794-0
Fax +49 (0) 5021-9794-23
Internet Address www.busch-spreen.de
MyCatalog
Wandstärke (berührend)
Wandstärke (optisch-berührungslos)
Mündungsoberfläche
Ovalität am Körper
Formnummernlesung (DOT-Code)
Formnummernlesung (Klarschrift)
Die ISM verfügt über
die elektronische Steuerung GPM, die bereits in mehreren hundert
Glasprüfmaschinen integriert ist
ein Antriebssystem mit Servomotortechnik
Rissmessung durch Lasertechnologie
eine von Flaschenmaßen und Anzahl der Stationen im Stern abhängige
Maschinengeschwindigkeit von bis zu 400 Flaschen/Minute
einen schwenkbaren 17"-TFT-Monitor mit großer Tastatur und weiteren
Bedienelementen
eine umfangreiche Steuerungssoftware (kein Windows-Betriebssystem)
einen staubgeschützten und klimatisierten Elektrik-/Elektronikbereich
330 mm Arbeitsradius und bis zu 4 Rotationsstationen
Anschluss für bis zu 4 externe Stausensoren am Schaltschrank
synchrone Start- und Bremsrampensteuerung für alle Antriebe (Bandmotor,
Hauptantrieb, Rotationsantrieb, Trommelstabilisierung,
Einlaufvereinzelung)
schnelle NOT-Stop-Bremsrampe über Frequenzumrichter und damit kein
Austrudeln der Antriebe
elektromagnetische Verträglichkeit (EMV)
Booth Hall 13 B23
PRODUCT OVERVIEW
Die Elektronik der ISM gewährleistet die Netzwerkfähigkeit für die
Kommunikation mit anderen Glasprüfmaschinen und/oder diversen
Linieninformationssystemen.
PRODUCT DETAILS
Inspektions- und Sortiermaschine ISM
Mit der ISM können folgende Messungen durchgeführt werden
Planität
Dichtigkeit
Höhe/Innenkaliber und Außenkaliber
Mündungsrisse
Bodenrisse
1517
glasstec
glasstec
Buss & Partner GmbH
Address Habsburger Platz 1
80801 München
Germany
Telephone 0049-89-383954-0
Fax +49-89-383954-10
Internet Address www.buss-partner.com
Booth Hall 13 D46
PRODUCT OVERVIEW
MyCatalog
MyCatalog
http://www.buss-partner.com/english/products/PC-24-7-Overview-en.pdf
Conversion Kit for Non-Round Containers
A pneumatical device, developed in a German glass container plant is now
manufactured and available to the industry through:
Dr. Martin Buss & Partner GmbH.
This kit enables a stable handling of non-round containers, by modifying the
drive side of the AGR On-Line Thickness Machine. This unique drive
improvement, provides constant contact between the side walls of the
non-round container and the capacitive sensing strips, ensuring a true
detection.
This inspection focuses on the weak areas of selected non-round ware,
within the tolerances of the OLT.
http://www.buss-partner.com/english/products/prospekt-nr-kit-e.pdf-d.pdf
COMPANY NEWS
PRODUCT DETAILS
TC 24/7
This new project will provide a system for permanent temperature
measurement and control on an IS machine. The system will be capable of
measuring all plunger and blank mould temperatures. Within less than 10
minutes all measurements on an 8 section double gob machine are
completed, whilst providing a repeatability of better than 3°C.
Service Linksnach obenDatenschutzNutzungsbedingungenSeite druckenSeite
empfehlen © Messe Düsseldorf
Mehr Informationen
Suchfunktion
Suchen Sie News, Aussteller, Produkte oder Infos zur Messe?
Suchwort eingeben:
A smaller, portable system for temperature control is our IPMS. More
information: http://www.buss-partner.com/english/products/ipms.html
PC 24/7
The PC 24/7 (Pressure control 24 hours a day 7 days a week) is an
innovative process control system for permanent pressure control in the
final blowing operation on an IS machine. The proven system is the only of
its kind available to the glass container industry. Furthermore the PC 24/7
can easily be adapted to monitor and control the plunger cooling and/or
plunger forming pressure.
Mehr Informationen
Suchfunktion
Suchwort eingeben:
1518
glasstec
glasstec
MyCatalog
MyCatalog
COMPANY NEWS
Service linksback to topPrivacy PolicyTerms of UsePrint pageRecommend this page ©
Messe Düsseldorf
More informations and functions
Search
Search for News, Exhibitors, Products or Information about the fair
Enter search key:
Messe Düsseldorf
Search
Enter search key:
C.M.S. Group
Dow Corning GmbH
Address Via A. Locatelli, 49
24019 Zogno / BG
Italy
Telephone 0039-0345-64-111
Fax 0039-0345-64-280
Internet Address www.cms.it
Booth Hall 16 F74
Address Rheingaustraße 34
65201 Wiesbaden
Germany
Telephone 0032-6488-9207
Fax 0032-6488-8950
Internet Address www.dowcorning.com
EMail
Booth Hall 10 B69
PRODUCT OVERVIEW
02.01 Cutting, breaking and snapping technology
02.01.01 Cutting technology
02.01.01.01 Cutting technology for float glass
02.01.01.02 Cutting technology for laminated safety glass
02.01.01.03 Cutting technology for technical glass
02.02 Drilling technology
02.03.01 Grinding techniques for flat glass
02.03.01.01 Grinding techniques for straight edges
02.03.01.03 Grinding techniques for formed glass
PRODUCT OVERVIEW
01.01 Raw material for glass production
02.08.06 Sealing techniques
02.11.04 Sealants
02.11.08 Chemicals
03.02.03 Insulating glass
03.04 Solar technology
03.04.01 Photovoltaics
03.09.03 Curtain wall elements / systems
03.09.03.06 Curtain wall elements (general)
03.09.08 Window constructions
1519
glasstec
glasstec
03.09.10 Frame profiles
03.09.11 Parting walls in glass
MyCatalog
MyCatalog
Dr. Schenk GmbH, Industriemesstechnik
03.10.01 Structural glazing
03.10.01.02 Structural glazing (general)
03.11.01.01.05 Fire protection
03.11.01.04.01 Sealants and adhesives
03.11.01.07 Sealants,adhesives and insulation materials.
03.11.03.01.06 Surface coating materials
03.11.03.01.06.03 Coating of flat glas
Address Einsteinstraße 37 (Martinsried)
82152 Planegg
Germany
Telephone 0049-89-85695-0
Fax +49-89-85695-200
Internet Address www.drschenk.com
Booth Hall 12 D05
03.11.03.02.02 Bonding technology
04.10 Adhesive technology
05.01.01.02 Measurement and control of viscosity
COMPANY NEWS
PRODUCT OVERVIEW
PRODUCT DETAILS
Messe Düsseldorf
Search
Enter search key:
Chess
The flat panel inspection system Chess is based on high-resolution
cameras using
Dr. Schenk proprietary pattern elimination technology.
Chess is a modular optical system capable of inspecting all panel sizes and
types,
including bare glass substrates, coated glass, color filters and OLED
structures.
A variety of resolution ranges is provided by the Chess flat panel inspection
system
in order to accommodate customer specific manufacturing and inspection
environments.
Messe Düsseldorf
Search
Enter search key:
1520
glasstec
glasstec
COMPANY NEWS
Messe Düsseldorf
Search
MyCatalog
MyCatalog
The main characteristics are:
Close wire detection (less than 10 mm)Very low cycle time, continuity can
be checked in less than 0.5 sec.Parallel detection of up of 4 independent
circuitsResistance calibration certificatePrint room full interfacesStatistical
report
Devicenet and Ethernet line connections
EDGETECH Europe GmbH
Enter search key:
Easy Automation S.r.l.
Address Erftstraße 22-24
41460 Neuss
Germany
Telephone 0049-2131-6068-44
Address Via Polinago, 23
00125 Rome
Italy
Telephone 0039-06-52364-774
Fax +49-2131-6068-43
Internet Address www.superspacer.com
Booth Hall 14 E08
Fax 0039-06-52368-579
Internet Address www.easyautomation.it
Booth Hall 12 A32
PRODUCT OVERVIEW
02.11.05 Spacers
05.01.02.03 Measurement, control and inspection of gas-filling levels
PRODUCT OVERVIEW
02.03.08 Screen printing techniques
COMPANY NEWS
PRODUCT DETAILS
Our Product
Electrical Control Machine of the backlight defrosting circuit by magnetic
field measurement
The machine for the electrical control (ECM) is a turn-key machine able to
perform all the following works
Mehr Informationen
Suchfunktion
Suchwort eingeben:
Electrical resistance measurementOvervoltage (from 0 to 36 volts)Check of
the wire continuity with detection of the magnetic field without contact
1521
glasstec
glasstec
Mehr Informationen
Suchfunktion
MyCatalog
MyCatalog
Das Modell 2208e ist ein vielseitiger PID Temperaturregler im 1/8
DIN-Format (48x96mm) mit Selbstoptimierung. Die Modulare Hardware des
2208e beinhaltet ein Alarmrelais, 2 Regelausgänge und ein
Kommunikationsmodul. Die Ausgänge sind für Heizen, Kühlen oder Alarm
konfigurierbar.
Suchwort eingeben:
Eurotherm Deutschland GmbH
Address Ottostr. 1
65549 Limburg
Germany
Telephone +49-6431-298-0
Fax +49-6431-298-119
Internet Address www.eurotherm.de
FC S.r.l.
Address Via Santi, 154
41032 Cavezzo / MO
Italy
Telephone 0039-0535-490-35
Fax 0039-0535-490-34
Internet Address www.fcsrl.com
Booth Hall 13 C16
Booth Hall 10 G72
PRODUCT OVERVIEW
PRODUCT DETAILS
2208e Miniatur Temperaturregler
PRODUCT OVERVIEW
02.03.03 Matting / Supercalendering / etching / sand blasting technologies
03.11.03.01.02 Grinding and polishing materials
04.01 Glazing tools
05.03.03 Optimization systems for cutting and yield
PRODUCT DETAILS
SMARTCUT C
Optimization software for linear glass cutting.
Characteristics:
Input ordersStock management of sheetsOptimization algorithm for 50
positionsPattern printingCreation of CNC machine code for only one type of
tableCompatible with Windows 95/98/ME
1522
glasstec
glasstec
Forvet S.r.l.
MyCatalog
MyCatalog
Fraunhofer-Institut für Silicatforschung ISC
Address Strada Piossasco, No. 46
10040 Volvera
Italy
Telephone 0039-011-9855200
Fax 0039-011-9853032
Internet Address www.forvet.it
Address Neunerplatz 2
97082 Würzburg
Germany
Telephone 0049-931-4100-0
Fax +49-931-4100-199
Internet Address www.isc.fraunhofer.de
Booth Hall 16 F06
Booth Hall 11 B26
PRODUCT OVERVIEW
PRODUCT OVERVIEW
02.05.02 Laser-marking technology
02.03 Edge and surface finishing technology
02.08.01 Complete plant for insulating glass production
03.02.03 Insulating glass
03.07.06 Laboratory glass
03.09.03 Curtain wall elements / systems
PRODUCT DETAILS
INTEGRATED GRINDING - DRILLING LINES
The combination of the highly developed Chiara grinding lines and the very
well established Francesca FC Series gives the user incredible flexibility
and productivity.
The latest example of intergrating the two systems has proved that working
with a sole supplier offers the user many strong advantages.
Flexible production of polished doors with notches and door handles with
holes, ground kitchen appliance glasses with holes and milled slots and
structural facades with deep countersinks for Structural Bolt Assemblies. All
this without manual intervention.
07.04 Test institutes
07.05 Research institutes and projects
COMPANY NEWS
Mehr Informationen
Suchfunktion
Suchwort eingeben:
1523
glasstec
glasstec
Gedevelop AB
Address Florettgatan 27 A
254 67 Helsingborg
Sweden
MyCatalog
Glass Service Inc.
Address Rokytnice 60
755 01 Vsetin
Czech Republic
Telephone 0046-42-386670
Telephone 420-571-498-519
Fax 0046-42-201686
Fax 420-571-498-599
Internet Address www.gedevelop.com
Internet Address www.gsl.cz
Booth Hall 13 C33
Booth Hall 13 A17
PRODUCT OVERVIEW
MyCatalog
PRODUCT OVERVIEW
01.02.04 Laboratory equipment
PRODUCT DETAILS
Glass Flow Measurement
The GFM is a non contact, optical measurement system that measures the
mass flow of the hot molten glass that falls from the bushing into the
fiberizer. The camera, which is looking at the glass stream, reads
information for stream diameter and stream velocity. This information is
sent to the central unit for signal conditioning and processing by a powerful
micro computer which, with the help of a set of configuration and calibration
parameters, calculates the glass flow.
The GFM Glass Flow Measurement System is available in two different
configurations: One for up to 3 cameras and another for up to 10 cameras.
01.04.04 Smelting technology for pot furnaces
01.04.08 Combustion technology
01.04.09 NOx control technology
05.03.05 Other control systems
07.04 Test institutes
1524
glasstec
glasstec
PRODUCT DETAILS
Laboratory Redox Measurement by GS Rapidox II
Your problem - our solution
GS Rapidox II can be used for a variety of applications in the glass
industry including:
Batch Redox control for the characterisation of "unknown" components,
such as recycled cullet and filter dust, an aspect of importance to container
glass producers.
Monitoring of the melting process by analysis of scoop samples taken from
the melting tank, e.g. during a colour change of a container and a float
glass furnace.
Evaluation of the samples taken from the feeder and the final glass
products, important in obtaining a stable forming process and for ensuring
consistent colour quality.
MyCatalog
MyCatalog
the forming process and also fiber breakage.
Tv glass
Fining efficiency of antimony and nitrates often used for TV glass
production can be monitored by measuring the change in Oxygen activity in
the melt with increasing temperature.
Speciality glasses
GS Rapidox II
can be a valuable tool in optimizing the production of a variety of speciality
glasses ranging from fiber glass to domestic high quality tableware.
GlasStress Ltd.
Address 21, Akadeemia tee
12618 Tallinn
Estonia
Measurements for:
Container glass
GS Rapidox II
has been successfully applied on a routine basis for measuring the
reducing power of organic and other pollutants which may be present in the
cullet.
Values measured can be used to correct the batch "recipe" in order to
stabilize the colour and fining of the melt.
Telephone 372-655-55-31
Fax 372-655-55-32
Internet Address www.glasstress.com
Booth Hall 12 D47
PRODUCT OVERVIEW
Float glass
GS Rapidox II
measurements can be of benefit in controlling the fining and foaming
processes which take place during float glass melting. Oxygen partial
pressure in glasses as a function of temperature relates to the addition of
fining agents such as sulphates and minor amounts of coke or blast furnace
slag.
Fiber glass
GS Rapidox II
measurements can be of benefit in controlling foaming processes. Besides
this the GS Rapidox II measurement can show the effects of different raw
materials and scrap recycling on the radiative properties of the fibers during
05.01.01.07 Measurement and control of glass tension
PRODUCT DETAILS
Automatic transmission polariscope AP-06C
Polariscope AP-06C is a computer controlled device designed for automatic
stress measurement in solid and hollow axisymmetric glass products
(drinking glasses, bottles, neck tubes of CRT bulbs, lamps, optical fibre
preforms, etc.). It permits also edge stress measurement in glass plates
and automotive glazing, thickness stress measurement in strips cut out
from glass plates, and measurement of stress at edge corners. Photoelastic
measurements are completely automatic and take from 2 to 10 seconds.
1525
glasstec
glasstec
After that stress distiribution in any section of the test object can be
displayed on the screen. Diameter of the field of view is 70 mm. The
measurement area can be easily displaced using the coordinate device
with digital readout. Modern integrated photoelasticity algorithms are used
for stress calculation from the measurement data. The polariscope can be
used for stress measurement near the production line. Its handling does not
need any knowledge about photoelasticity or stress analysis. The
polariscope is delivered together with a laptop computer and software to
control the measurements.
MyCatalog
MyCatalog
angebrachten Zeilenkamera. Je nach Anforderung können
auch mehrere Kameras nebeneinander eingesetzt
werden.
Die Glasfehler werden mit einer Linienbeleuchtung im
Durchlichtverfahren visualisiert. Für Spiegelglas und
einige Beschichtungen wird ein vergleichbares Auflichtverfahren
eingesetzt.
Mit einer Auflösung von 0,1 mm pro Bildpunkt können
Graphikon GmbH
alle mit dem Auge sichtbaren Glasfehler erkannt
werden. Für anspruchsvollere Anwendungen ist auch
Address Mandelstraße 16
10409 Berlin
Germany
Telephone 0049-30-42104-0
Fax +49-30-42104-750
Internet Address www.graphikon.de
eine höhere Genauigkeit wählbar.
Die Bildaufnahme erfolgt während der prozesstypischen
Förderung der Scheiben.
Vorteile
Robuste Detektion von allen relevanten Fehlerarten
Geeignet für alle Arten von Flachglas
Geeignet für alle Scheibenabmessungen
Booth Hall 13 D08
Geeignet für viele Beschichtungen
Lückenlose Überwachung der Glasqualität
PRODUCT OVERVIEW
Frühzeitige Erkennung von Prozessstörungen
Leicht adaptierbar auf spezifische Anforderungen
Einfache Prozessintegration
Standard
Datenschnittstelle für SPC
PRODUCT DETAILS
G/Glas Glasinspektion
Aufgabenstellung
Flachglasscheiben unterschiedlichster Formate sollen
auf Kratzer, Knoten, Blasen und Beschichtungsfehler
untersucht werden. Die Prüfung soll direkt im Produktionsprozess
erfolgen.
Lösung
Die Bildaufnahme erfolgt mit einer über der Förderlinie
1526
glasstec
glasstec
MyCatalog
Grenzebach Maschinenbau GmbH
MyCatalog
02.09.02 Laminated glass technology
02.09.02.01 Laminated glass technology with foil for architectural glass
02.09.03 Foil treating technology (storing, climate, uncoiling)
Address Albanusstraße 1-3
86663 Asbach-Bäumenheim
Germany
Telephone 0049-906-982-0
Fax +49-906-982-108
Internet Address www.grenzebach.com
05.01.01.06 Measurement and control of speed
05.02 Regulation technology
Booth Hall 15 D49
05.02.01 MRP machine and transport adjustment
05.02.02 CNC control for handling machines
PRODUCT OVERVIEW
01.05.01 Float glass technique
01.05.02 Glass drawing technique
01.10 Cold end technology for float glass, laminated glass, wired glass and other types
of flat glass
COMPANY NEWS
01.10.01 Optimization of glass cutting and glass production yield
01.10.02 Cullet transport
01.10.03 Inspection systems
01.10.04 Paper applying machines
01.10.06 Stacking machines
01.13 Conveying, transport, packing and warehouse technology
Messe Düsseldorf
Search
Enter search key:
01.13.01 Feeding and stacking systems
01.13.02 Transport and handling systems
02.01.04 Snapping techniques
02.01.04.01 Mechanical snapping devices
02.05 Laser technology
02.05.01 Laser-isolating technology
02.06 Coating technology
Messe Düsseldorf
Search
Enter search key:
02.06.01 Vacuum coating equipment
1527
glasstec
glasstec
MyCatalog
MyCatalog
Paramagnetische Restsauerstoffmessung
Anerkanntes Prüfmittel - Standardmessgerät der offiziellen Prüfinstitute
Mehr Informationen
Suchfunktion
Suchwort eingeben:
Geeignet für alle Gasarten und Gemische
Kommunikationsmodul 5
Automatische Qualitätskontrolle mit Dokumentation
Helantec GmbH
Diagnose und Fernwartung
Vielfältige Schnittstellen
Address Werner-von-Siemens-Straße 47a
76646 Bruchsal
Germany
COMPANY NEWS
Telephone +49-7251-85731
Fax +49-7251-85739
Internet Address www.helantec.de
Booth Hall 17 D20
Mehr Informationen
Suchfunktion
Suchwort eingeben:
PRODUCT OVERVIEW
02.08.05 Gas filling machines and gas devices
02.11 Auxiliary products
ICS Inex Inspection Systems
05.01.02.02 Measurement, control and inspection of gas compounds
Address 13075 US 19 North
33764 Clearwater, Florida
USA
05.01.04 Detectors for laminated glass
Telephone 0001-727-535-5502
Fax 0001-727-532-8513
Internet Address www.icsinex.com
PRODUCT DETAILS
Booth Hall 13 C45
HELOX 4 KVSN-F
1528
glasstec
glasstec
PRODUCT OVERVIEW
PRODUCT DETAILS
Isis
Precision Measurement System
Camera-based, non-contact, automatic weight and dimensional
measurement system for glass containers.
The Isis system offers a proactive solution that allows users to utilize
accurate process control data to predict quality trends, rather than reacting
when containers are outside specifications, and make hot end adjustments
before the process is out of control.
Eliminating the need for cumbersome and time-consuming manual tests,
the Isis Dimensional Gauge precisely measures at a throughput speed of
less than 30 seconds per container, significantly reducing labor costs,
increasing efficiency, and freeing operators to perform other tasks.
Isis is available in both laboratory (Off-Line) and On-Line versions. The
Online version is part of the MiniLab system, a fully automatic container
inspection and handling system.
ilis GmbH
MyCatalog
MyCatalog
PRODUCT OVERVIEW
PRODUCT DETAILS
Automatische und objektive Messung der Restspannungen in Gla
Automatische Bestimmung und farbcodierte Darstellung der
SpannungsverteilungBerechnung von Polarisationswinkel, Tempergrad,
optischem Gangunterschied und SpannungArtikelbezogene Eingabe und
Speicherung aller Parameter in MessvorschriftenEingabe von
Dickenprofilen zur punktgenauen Berücksichtigung der
WandstärkeDefinition von Grenzwerten zur
Gut/Schlecht-BewertungDatenbank zur automatischen Archivierung aller
Ergebnisse
IMPAC Infrared GmbH
Address Kleyerstraße 90
60326 Frankfurt am Main
Germany
Telephone 0049-69-97373-0
Fax +49-69-97373-167
Address Konrad-Zuse-Str. 12
91052 Erlangen
Germany
Telephone +49-9131-974779-0
Internet Address www.impacinfrared.com
Booth Hall 12 B69
Fax +49-9131-974779-9
Internet Address www.ilis.de
Booth Hall 13 A17
PRODUCT OVERVIEW
1529
glasstec
glasstec
PRODUCT DETAILS
MyCatalog
MyCatalog
IRIS Inspection Machines
Pyrometers-Portables
IS 8 plus
temperature ranges between 600 and 2500°CHigh accuracyView finder
with display for temperature or emissivityFocusable precision opticsSmall
spot sizes min. 0.8 mmDigital display on the housingExtremely short
response time: 1 msIntegrated maximum value storageDigital interface
RS232Optional: analysing software PortaWin
The series 8 pyrometers are high quality, battery driven portables for
non-contact temperature measurement between 300 and 2500°C.
The aluminum die-cast housing is specially designed for the daily use
under rough industrial conditions. The easy focusable precision optics
provides small spot sizes for measuring distances between 500 mm and .
The bright, optimized view finder with exact spot indication and built-in
temperature display facilitates the accurate aimin on the object. The
extremely short response time of 1 ms allows exact measurements of fast
moving objects. The maximum temperature can be stored in the built-in
peak picker (maximum value storage). The instruments are mainly used in
the steel-, glass, forging industry and in foundries.
For high temperatures the IS 8 plus is available in two temperature ranges
between 600 and 2500°C, for the medium temperatures the IGA 8 plus with
a range from 300 to 1300°C.
The IS 8-GS plus is a special version for the use in foundries, the IS 8-K
plus is for the use in coking plants.
Typical applications for metals:
preheating, tempering, hardening, normalizingforging,
brazingsinteringmeltingwelding, rollingfounding
Typical applications for glass:
Address 21, rue Marcel Pagnol
69694 Venissieux Cedex
France
Telephone 0033-4-72783527
Fax 0033-4-72783507
Internet Address www.iris-im.com
Booth Hall 13 D31
PRODUCT OVERVIEW
01.06.11 Bottle and glass container machines
PRODUCT DETAILS
molton glassglass gobglass moulds
EVOLUTION 5 - BASE, FINISH AND STRESS INSPECTION
EVOLUTION 5 provides to hollow ware glass industrials a selective and
reliable solution specially designed for finish, bottom and stress inspection
of bottles and jars.
EVOLUTION 5 offers high precision in detection even at high speed
whatever size, form and colours of containers :
BOTTOM INSPECTION
. Stuck plungers
. Blisters
. Birdswings
. Tears (even tight and vertical)
. Stones
1530
glasstec
glasstec
MyCatalog
MyCatalog
. Inclusions
FINISH INSPECTION
. Line over Finish
. Blisters
. Overpressed
. Unfilled
. Scaly
. Sugary top .
STRESS INSPECTION
. Stones
. Inclusions
. Faults with tension
EVOLUTION 5 Innovations
. 5 shootings ensuring, in the same time, finish and bottom inspection (by
transmission or stress) and cavity identification
. An easy and precise optical setting which permits a high resolution for all
finish types
. A high resolution detection covering all the bottom types including
engravings in the base area and the heel.
. Adjustment of cameras and sources position are driven by computer.
. An innovative light source.
. To mix stress and transmission inspection according to the type of
containers being inspected.
COMPANY NEWS
Messe Düsseldorf
Search
Enter search key:
Messe Düsseldorf
Search
Enter search key:
Messe Düsseldorf
Search
Enter search key:
ISRA SURFACE VISION GmbH
Address Albert-Einstein-Allee 36-40
45699 Herten
Germany
Telephone 0049-2366-9300-0
Fax +49-2366-9300-230
Internet Address www.isravision.com
Booth Hall 15 F49
PRODUCT OVERVIEW
02.07.02 Components and accessories for display glass technology
1531
glasstec
glasstec
MyCatalog
MyCatalog
COMPANY NEWS
PRODUCT DETAILS
SURFACE VISION
An homogene, gemusterte, bedruckte, beschichtete oder farbige
technische Oberflächen werden im täglichen Marktwettbewerb höchste
Qualitätsansprüche gestellt. Kleinste Abweichungen oder Fehler führen zu
Produktionsstörungen und damit zu einer Wertminderung. Als
Problemlösung finden Sie in unserem Haus neben branchenspezifischen
Prozesskenntnissen ausgereifte, vollautomatische, kamerabasierte
Inspektionsanlagen für folgende technischen Oberflächen,
Oberflächenformen und Produktionsarten:
Technische OberflächeOberflächenformProduktionsart
Film, FolieHomogenStückgut
GlasGemustertSchüttgut
KunststoffBeschichtetEndlosgut
LackierungenFarbig
NonwowensBedruckt
PapierLackiert
Printprodukte
Die Anlagen basieren auf einem einheitlichen Konzept, das auf
Standardmodulen und Standardbausteinen aus eigener Herstellung beruht.
Aufgrund dieser Bauweise sind alle Anlagen zu einem hohen Grad
kundenspezifisch anpassbar. Entscheidende Grundlagen für die hohe
Akzeptanz und Performance der Systeme sind die sichere,
wiederholgenaue Fehlererkennung, die weltweit einzigartigen
Echtzeit-Fähigkeiten sowie die Robustheit und Zuverlässigkeit.
Generelle Eigenschaften
FehlerklassifikationFehlervisualisierung
FehlerdatenbankFehlerprotokollierung
Bilddatenbank aufgetretener FehlerEchtzeitverarbeitung
Statistische Auswertung der InspektionsgebnisseEinfache Bedienung und
Einstellung
Integrierbar in vorhandene FertigungsabläufeVollständig über die
Bedieneinheit steuer- und überwachbar
Ferndiagnose und Fernwartung
Messe Düsseldorf
Search
Enter search key:
JENOPTIK Surface Inspection GmbH
Address Machtlfinger Straße 21
81379 München
Germany
Telephone 0049-89-748558-0
Fax +49-89-748558-10
Internet Address www.jenoptik-si.de
EMail
Booth Hall 11 A59
PRODUCT OVERVIEW
PRODUCT DETAILS
SIRIS
Modulares Bahninspektionssystem der neuesten Generation. Schnell und
leistungsfähig. Zur Online Qualitätskontrolle kontinuierlich produzierter
Materialien, wie Film, Folien, Papier, Stahl und Glas geeignet.
Eigenschaften & Vorteile:
universelles optisches Frontend mit hoher Auflösung (CCD-Kamers,
Laserscanner und Kombinationen aus beidem)schnelles und
leistungs-fähiges FPGA/DSP Konzept mit Echtzeit 1D und 2D
FilternOverflowfestC/S-Architekturbenutzerfreundliches und leicht zu
1532
glasstec
glasstec
erlernendes Windows-UserinterfaceDefect-Map mit Graubildern der
Fehlerintegrierte DatenbankXML-DatenexportStatistikfunktionen zur SPC
und Trendverfolgungprodukt- und rollen-spezifische Protokollierung
MyCatalog
MyCatalog
SIRIS für Stückgut-Inspektion
Kompaktes Stückgutinspektionssystem. Hohe Auflösung für anspruchsvolle
Inspektionsaufgaben im Halbleitermarkt und in der Fertigung von
Flatpanel-Displays.
Eigenschaften & Vorteile:
besonders hohe Auflösung zur Detektion kleinster oder
schwachkontrastiger Fehlerin die Linie integrierbar oder als
Stand-Alone-System verfügbarmanuelle oder automatische
Beladungintegrierte Datenbank mit ODBC-ZugriffGraubilder der Fehler
verfügbarStatistikfunktionen zur SPC und Trendverfolgung
JSJ Jodeit GmbH
COMPANY NEWS
Messe Düsseldorf
Search
Enter search key:
Address Am Nasstal 10
07751 Jena
Germany
Telephone 0049-3641-6229-20
Fax +49-3641-6229-40
Internet Address www.jsj.de
Booth Hall 15 C28
Messe Düsseldorf
Search
Enter search key:
PRODUCT OVERVIEW
01.04.02 Forehearth technology
01.04.04 Smelting technology for pot furnaces
01.04.06 Recuperative systems
01.04.07 Electric heating systems
01.04.08.01 Combustion technology for oil and gas fired smelting furnaces
01.04.08.02 Combustion technology for oxygen heating systems
1533
glasstec
glasstec
Land Instruments GmbH
MyCatalog
Linde AG, Linde Gas Division
Address Fixheider Straße 6
51381 Leverkusen
Germany
Address Seitnerstraße 70
82049 Pullach
Germany
Telephone 0049-2171-7673-0
Telephone 0049-89-7446-0
Fax +49-2171-7673-9
Internet Address www.landinst.de
Fax +49-89-7446-1230
Internet Address www.linde-gas.com
EMail
Booth Hall 12 C32
Booth Hall 13 A36
PRODUCT OVERVIEW
MyCatalog
PRODUCT OVERVIEW
01.02.02 Industrial gases
01.02.03 Lubricators and coolants
PRODUCT DETAILS
FIBROPTIC MODEL FG THERMOMETER
Model FG is designed specifically for measurement in the hostile conditions
encountered in the glass industry.
It is intended primarily for monitoring and controlling glass and refractory
temperatures, principally in the forehearth, but can also be used in the
regenerator, tank and refiner.
Model FG operates on a simple 4 to 20mA current loop, requires no water
cooling and a built-in self-test facility makes routine maintenance an easy
task.
A versatile adjustable mounting assembly, complete with quick release
adapter and air purge, facilitates ease of installation and removal for
inspection purposes.
01.04.08.02 Combustion technology for oxygen heating systems
01.06.13 Flash welding and fire polishing machines
01.06.16 Aids for the forming of hollow glass
1534
glasstec
glasstec
COMPANY NEWS
MyCatalog
MyCatalog
02.01.03 Devices for coating removal
02.01.04 Snapping techniques
Messe Düsseldorf
Search
02.01.04.02 Thermal snapping devices
02.05.01 Laser-isolating technology
Enter search key:
02.08 Insulation glass technology
02.08.02 Production equipment for spacers
02.08.04 Machinery for the delamination of (glass) edges
Mehr Informationen
Suchfunktion
Suchwort eingeben:
02.08.05 Gas filling machines and gas devices
02.08.06 Sealing techniques
02.09.01 Pre-tempering technology
02.09.01.01 Furnaces for thermal pre-tempering of glass
02.10.01 Washing machines and equipment
LISEC GROUP
Address Bahnhofstraße 34
3363 Hausmening
Austria
Telephone 0043-7477-405-0
COMPANY NEWS
Fax 0043-7477-405-80
Internet Address www.lisec.com
Booth Hall 17 D35
PRODUCT OVERVIEW
02.01 Cutting, breaking and snapping technology
Messe Düsseldorf
Search
Enter search key:
1535
glasstec
glasstec
MyCatalog
MyCatalog
PRODUCT DETAILS
Mehr Informationen
Suchfunktion
Suchwort eingeben:
Complete ventilation systems
for glass industry
dust exhausting equipment for other sectors of industry
general exhausting systems
technological steel construction
consultation and planning with our specialists
COMPANY NEWS
Mehr Informationen
Suchfunktion
Suchwort eingeben:
Messe Düsseldorf
Search
Enter search key:
LWN Lufttechnik GmbH
Address Hühndorfer Höhe 7
01723 Wilsdruff
Germany
Telephone 0049-35204-29716
Fax +49-35204-29717
Internet Address www.lufttechnik-lwn.de
Mehr Informationen
Suchfunktion
Suchwort eingeben:
Booth Hall 13 D67
PRODUCT OVERVIEW
01.06.11 Bottle and glass container machines
1536
glasstec
glasstec
MyCatalog
MARPOSS GmbH
Address Mercedesstraße 10
71384 Weinstadt
Germany
Telephone 0039-051-899-111
Fax 0039-016-899-525
Internet Address www.marposs.de
MyCatalog
Post-Process-Messsysteme von Marposs erfassen die kritischen Ma e von
Werkst cken, die auf Dreh- oder Schleifmaschinen bearbeitet werden, und
werten die Ergebnisse f r die bertragung von Korrektursignalen zur
Maschinensteuerung aus.
Sie k nnen auf der Basis von standardm igen oder kundenspezifisch
angepassten Messvorrichtungen realisiert werden. Die verwendeten
elektronischen Auswertesysteme erm glichen die statistische Verarbeitung
der aufgenommenen Messdaten. Alle L sungen, ob einfach oder komplex,
k nnen teilespezifisch oder flexibel, manuell oder automatisch, als
Einzelger t oder vollst ndig integriert in die Prozessautomation und in
Robotersysteme entwickelt werden.
EMail
Booth Hall 12 B05
MSC Inspection Worldwide
PRODUCT OVERVIEW
PRODUCT DETAILS
Messen und Bewachen auf Schleifmaschinen
F r Me - und Steueraufgaben auf den verschiedensten Schleifmaschinen
bietet Marposs heute eine breite Palette von Standardkomponenten und
-baugruppen an, die f r die kundenspezifischen Anforderungen optimiert
werden.
Die Marposs Anwendungen k nnen s mtlichen Kundenanforderungen
nachkommen, was Messsysteme, Schleifscheibenausgleichsysteme und
berwachungsensore betrifft.
Wie alle Produkte von Marposs werden diese Systeme f r den harten
Fertigungseinsatz ausgelegt.
Address Le Garon-Montagny, B.P. 37
69702 Givors Cedex
France
Telephone 0033-437-20-1561
Fax 0033-478-07-9450
Internet Address www.msc.fr
EMail
Booth Hall 13 B62
PRODUCT OVERVIEW
PRODUCT DETAILS
Post-process-Messsysteme
Focus
The
FOCUS
machine represents a real breakthrough in the quality control of filled,
sealed bottles. It allows an effective detection of foreign particles (glass,
metal, plastic and organic deposits) in bottles filled with any translucent
liquid.
Detection and rejection of critical defects (down to 1mm2).
1537
glasstec
glasstec
Fully integrated into an HACCP process.
Simple operating principle.
Quick and simple changeover in production.
First foreign particle inspection system ever installed on a bottling line.
Already 10 FOCUS are under production in 2004.
More than only a physical detection of foreign particles, the FOCUS
machine will enable you to :
Protect your customers.
Protect your brand image avoiding negative publicity.
Answer to higher quality standards
IS machine
I-CARE is composed of:
One (or two) high resolution IR camera(s) (equipped with a cooling system)
to be installed along the conveyor just after the IS machine (30 cm wide)
A control unit connected to the cameras by optic fiber ; Its screen allows
direct access to the information
A remote supervision unit connected to Ethernet.
Automatically synchronized to the IS machine, I-CARE analyzing the
infrared radiation of the articles to:
Evaluate the positioning of the articles on the conveyor (wrong spacing,
stuck/down articles)
Detect critical defects (birdswings, big blisters, etc.) and rejects bad ware
(freaks, leaners, etc.) before the annealing lehr
Determine bad glass distribution
BENEFITS
On the short-term:
Gives immediate access to information (by cavity)
Reject critical defects
On the long-term:
Give the main trends of the process and allows objective analysis of the
process parameters
Reduce the rate of defects by anticipated detection
Reduce the interventions on the line
MyCatalog
MyCatalog
Nedo GmbH & Co. KG
Address Hochgerichtstraße 39-43
72280 Dornstetten
Germany
Telephone 0049-7443-2401-0
Fax +49-7443-2401-45
Internet Address www.nedo.com
Booth Hall 12 A69
PRODUCT OVERVIEW
PRODUCT DETAILS
Laser distance measuring device DISTO A3
Outstanding compactness and optimum functionality are the main characteristics of the new
DISTO"! A3.
Caracteristics:
Measuring range: 0.16 ft up to 325 ft
(0.05 m to 100 m)
Accuracy: ± 0.06 in. (± 1.5 mm)
Area, volume measurement
Minimum/maximum measuring
Continuous measuring
Addition, subtraction
Illuminated display
Built-in bubble
1538
glasstec
glasstec
Nirvana Technologies (P) Ltd.
Address A3/492, Sahakar Nagar,
Part-2, Chembur
400 071 Mumbai
India
MyCatalog
Optische On-line-Sensoren OPOS
Address Hertzstraße 164b
76187 Karlsruhe
Germany
Telephone 0049-721-97130-50
Telephone 0091-22-2551-8312
Fax 0091-22-2550-6916
Internet Address http://www.nirvanatec.com
MyCatalog
Fax +49-721-97130-51
Internet Address www.opos.de
Booth Hall 13 F09
Booth Hall 15 C21
PRODUCT OVERVIEW
PRODUCT OVERVIEW
02.13.01 Components and accessories (suppliers to the glass machinery industry)
01.10.01 Optimization of glass cutting and glass production yield
02.13.02 Software
PRODUCT DETAILS
COMPANY NEWS
Retroscanner
The Retroscanner is a a telecentric laser scanner for all purposes with
limited space behind the measurement object.
Messe Düsseldorf
Search
Enter search key:
The usual telecentric laser scanners comprise an emitter and a receiver,
both located on opposite sides of the measurement object. Differing from
that, the retro scanner comprises only a combined emitter / receiver unit
(transceiver) and a small retroreflective stripe (height ~ 3 mm) "behind" the
measurement object. This concept provides three main advantages: less
effort in the adjustment of the system, minimal space requirement and of
course less effort in the installation at a production plant.
Measurement Objects:
- all objects, shadowing (partially) an incoming laser beam,
- outer contours up to 120 mm,
- minimal distance between contour edges 2 mm
Measurements
1539
glasstec
glasstec
- object edges (shadow edges) or values directly related to object edges
(object diameter, slit width...)
MyCatalog
MyCatalog
COMPANY NEWS
- resolution 1 µm
- on demand: development of an on line bow sensor
Special features:
- high robustness against object movement
- minimal effort in adjustments / alignment
Mehr Informationen
Suchfunktion
Suchwort eingeben:
Glass-Scanner I-Mike
I-Mike provides contact free measurements of the relevant parameters of
transparent objects (tubes, rods, bottles ).
Within each measurement interval the transmitter scans the measurement
field by moving a laser beam exactly parallel to the optical axis. Located
behind the measurement object, the receiver is facing the transmitter. He
detects the incoming beams aside and through the object. The diameter
and position of the object is calculated by evaluation of the object s
shadow.
Wall thickness or inner diameter of transparent tubes is measured by
evaluation of the beam paths through the object. In the case of glass rods,
the refraction index and two diameters are measurable (parallel and
perpendicular to the optical axis).
Measurements:
Messe Düsseldorf
Search
Enter search key:
Optische Prüfsysteme Dr. Günther
- diameter
- wall thickness / inner diameter
- siding and ovality
- bow
- birefringence of tubes
- refraction index of rods
Special Features
Address Dänkritzer Straße 32
08058 Zwickau-Mosel
Germany
Telephone 0049-37604-70721
Fax +49-37604-70882
Internet Address www.optical-inspections.com
- resolution 1 µm
- measurement field up to 150 mm
Booth Hall 13 A92
- highly robust against object movements in the measurement field
- easy alignment and calibration
PRODUCT OVERVIEW
- on demand: double head system for tubes up to 350 mm
- on demand: development of conicity measurement of tubes and rods
1540
glasstec
glasstec
PRODUCT DETAILS
MyCatalog
MyCatalog
ODOL
Opalglas-Prüfgerät
Spezialmaschine zum Prüfen von Opalglas-Behältern
BMF
BMF
Boden-Mündung-Formennummerprüfung
Inspektion von Boden und Mündung an Behälterglas, Lesen der
Formennummer auch in Klarschrift
COMPANY NEWS
KSWI
KSWI
Kombiniertes Seitenwand-Inspektionsystem
Messe Düsseldorf
Search
Enter search key:
Prüfen der Seitenwand von Behälterglas auf Fehler, Messen verschiedener
Dimensionen am Behälter
OSAI S.p.A.
MIS
MIS
Mündungsinspektion
Separates Gerät zum Prüfen der Mündung an Behälterglas
Address Via Torino, 14
10010 Barone C.se
Italy
Telephone 0039-011-9899794
Fax 0039-011-9899808
Internet Address www.osai.it
Booth Hall 15 G12
PRODUCT OVERVIEW
ODOL
1541
glasstec
glasstec
PRODUCT DETAILS
Automation / Robotics Control
OSAI have been pioneers in the Industrial Automation General Purpose
sector since the eighties. Our automation and robot systems are
programmed with dedicated purpose built development languages:
MyCatalog
PRODUCT OVERVIEW
PRODUCT DETAILS
Series 10 GP : is programmed in STORM. A simple and powerful language
to control up to 6 interpolated axes with multiprocess (up to 999 parallel
tasks), without the need to develop a complex "interface logic".Series 10
Power GP : this brand new product enables control of up to 32 axes on a
single control, with OS_WIRE digital interface with a high performance
language based on the integration of sophisticated dedicated movement
tasks within the IEC 6-1131 standard machine logic environment.
PDH Pro Glas 2000
. . . was kann die Software für Sie leisten ?
Die frühzeitige Erkenntnis, daß das Glaserhandwerk mehr braucht als
Lieferanten für Glas und Zubehör, war die entscheidende Grundlage zur
Entwicklung dieser nutzerfreundlichen Software.
Seit Ende der 80ziger Jahre ist P D H ProGlas 2000 europaweit
erfolgreich für Sie am Markt.
COMPANY NEWS
Das individuelle Softwarekonzept für Ihren Erfolg. - Die Lösung für die
komplexen Aufgaben der
modernen Glaswelt - z. B. Kalkulation, Materialverwaltung, Projektkontrolle
und Fakturierung.
Messe Düsseldorf
Search
Enter search key:
MyCatalog
ProGlas 2000 bietet Ihnen :
- Über 15.000 Artikel schon im Lieferumfang
- Eine Software für die gesamte Verwaltung
- incl. folgender aktueller Preislisten :
- Gothaer-Versicherungsliste
- Allianz-Versicherungsliste
- Flachglas-Liste (Iso, ESG, Ornamente...)
PDH Computersysteme GbR
- Interpane-Liste (Iso, ESG, Ornamente...)
- Dorma-Liste
Address Pelmkestraße 17
58089 Hagen
Germany
Telephone 0049-2331-332224
Fax +49-2331-332214
Internet Address www.pdh-computer.de
- Pauli+Sohn Beschlagsliste
- Schleif- und Bearbeitungslisten
- Standard-Bruttoliste
- Senatsliste JZV Berlin
- Behörden-Liste LV 761/661
- InnoTec-Liste (Iso, ESG, VSG, Ornam.)
- Rechnungseingangs- und Ausgangsbuch
Booth Hall 9 A44
- Automatisches Mahnwesen
- Grafikausdruck mit Bemaßungsmöglichkeit :
1542
glasstec
glasstec
- Ganzglasanlagen incl. Grafiken
- Dusch - Anlagen incl. Grafiken
MyCatalog
MyCatalog
Prodim International BV
- Fenster und Türen incl. Grafiken
- Berechnung von Bilderleisten
Precitec Optronik GmbH
Address Duizeldonksestraat 17
5705 CA Helmond
Netherlands
Telephone 0031-492-579050
Fax 0031-492-579051
Address Raiffeisenstraße 5
63110 Rodgau
Germany
Internet Address www.prodim.nl
Booth Hall 12 E06
Telephone 0049-6106-8290-0
Fax +49-6106-8290-26
Internet Address www.precitec-optronik.de
Booth Hall 13 D86
PRODUCT OVERVIEW
02.05 Laser technology
02.13.02 Software
03.11.01.01.07 Machinery/tools
PRODUCT OVERVIEW
PRODUCT DETAILS
PRODUCT DETAILS
NEMESIS WT
Chromatic Nemesis WT Measuring System
The Nemesis WT measuring unit made by Precitec Optronik, Rodgau,
Germany now offers a simple way of measuring samples of very thin
materials such as SiC wafers and similar materials.
The system is designed for detecting thickness and topography of both
transparent and opaque materials of highly sensitive products
simultaneously. This is a non-contact system eliminating any damage to the
surface allowing samples to be returned as sellable product.
The new unit works with the chromatic white light sensors of the new
CHRocodile product family from Precitec Optronik.
ProCutter Plotter
For those companies that use a traditional cutting machine, or think it takes
to much time to adjust their CNC machine, it is extremely useful to have a
ProCutter® Plotter. The ProCutter® can be easily connected to the
Proliner® measuring device through the Proliner® Host Software. This way
it is possible to directly make a plot of your measurements, You will then
have a physical template out of your digital template. With this template you
can start production on your cutting machine, or you can use the template
as a quality check.
The width of the media is 122 cm, and Prodim can deliver special media for
the Proliner®. The ProCutter® plotter features a large, easy-to-use control
panel that allows you to quickly and easily change setting such as speed,
pressure and plot mode. You can save settings in 4 user-defined
configurations for even faster switching between your favorite cutter
settings. With the exclusive control software, you can adjust settings, and
defined your saved setting right from your Windows PC.
1543
glasstec
glasstec
MyCatalog
The ProCutter® plotter offers tracking accuracy and it combines a durable
drag-knife cutting head with advanced internal programming to deliver
quality and versatility. The unique drag-knife cutting technology eliminates
flaws due to blade-wear.
prepare the final drawings on site, and send the results to the factory for
immediate production. Delivery times can be shortened because of faster
measuring, and it is no longer needed to make traditional templates. You
can imagine what a competitive advantage you will get!
Adjustable media support rollers and roll-end flanges make it easy to load
your vinyl straight every time. The ProCutter® is so accurate that we
guarantee repeatable plots up to 8 metres (26 ft.) in length.
Measurements up to 10 meters can be made at one time and larger
measurements can be made by combining drawings in a simple leap frog
process.
http://www.prodim.nl/the-procutter_14.html
http://www.prodim.nl/the-proliner_13.html
Proliner® 3D Measuring Device
The Proliner® 3D Measuring Device has been available for some time now.
More and more companies realize how this device can help them to
improve the productivity and efficiency. The ultramodern Proliner® takes a
most of the work out of difficult measurements. This mobile measuring
device records the measuring points very precisely and then saves the
collected information digitally. Since the Proliner® can be easily connected
to the common CAD-systems, it is possible to get accurate drawings in just
a couple of minutes. The Proliner® is capable of making precise
measurements of straight, curved, or very complex shapes. It doesn t
matter whether the object is in a horizontal, vertical or slanting position. It is
also possible to measure a combination of these positions at once. In just a
couple of seconds, the special pointer marks the relevant points in order to
register the outlines of the object. The Proliner® is extremely useful for
measuring counter tops, as you can measure the countertop and back
splash, including electricity outlets at once. The Proliner® can also be used
for quality control. If a template or a final product in 2-or 3D has been
made, it is very easy to scan the object with the Proliner® and check if
everything fits.
Proliner® 8-Series Measuring Device
As a result of the success of the first Proliner®, Prodim International will
release a new version of the 3D-measuring device, the Proliner® 8-Series
at the Marmomacc in Verona. This new model is very compact and
lightweight, has a lot of storage space, a large 8.4 touch screen, more
extensive user-friendly software options and more possibilities for
expanded usage.
The Proliner® offers the following advantages:
The Proliner® is very practical to use: it s compact, only 10 Kg, and
therefore easy to take. The device works with a rechargeable battery, so
you can measure about 3 hours continuously. The Proliner® is solidly
constructed to withstand actual in the field working conditions. To use the
Proliner® is a piece of cake: only a short training is needed for competent
usage.
With the Proliner® it is possible to measure two- or three dimensional.
Positioning or calibration is not needed, so you can immediately start
measuring. When used properly, it is possible to measure with an accuracy
of 0,3mm on 2m, or 0,6mm on 5m.
MyCatalog
The machine s weight is 8,5 kilos, and it is designed to offer optimal
transportability. This model is extremely useful for people who need to
travel and measure on-site. The measuring head can be folded into the
machine for optimal protection during travel. The compact design allows the
user to conveniently transport the machine anywhere, e.g. it can be easily
stored in overhead compartments on planes.
The Proliner® 8-Series works with the same dependable principle as the
first Proliner® model, which registers the X-Y-Z co-ordinates of the desired
shape, and translates these directly into a digital CAD file in DXF format.
The software platform of the Proliner® 8-Series is very extensive and offers
a variety of possibilities. It has some CAD functionalities integrated into the
machine, like trimming and fillet, which enables the user to prepare for
production, while still on-site. A socket connection, as well as the possibility
to use rechargeable batteries provides optimal flexibility. The machine has
a USB port, so results can be downloaded onto a laptop or USB stick, so
the results can immediately be sent per e-mail to the factory.
In short, the Proliner® 8-Series is designed for companies which need a
measuring solution, that offers more usage possibilities and software
options.
http://www.prodim.nl
Measurements can be seen in a digital drawing immediately. The results
are translated in a digital CAD file in DXF format. This means that you can
1544
glasstec
glasstec
Raute Precision Oy
Address Ahjokatu 4 A
FI-15801 Lahti
Finland
Telephone 358-3-82921
Fax 358-3-82941-04
Internet Address www.lahtiprecision.com
MyCatalog
MyCatalog
COMPANY NEWS
Messe Düsseldorf
Search
Enter search key:
Booth Hall 15 A48
Raytek GmbH
PRODUCT OVERVIEW
Address Blankenburger Straße 135
13127 Berlin
Germany
01.03 Preparation of raw materials and batches
01.03.01 Crashing and grading
01.03.02 Drying technology
Telephone 0049-30-478008-0
01.03.03 Metering and weighing technology
01.03.04 Mixing technology
Fax +49-30-4710251
Internet Address www.raytek.de
01.03.06 Cullet preparation
01.03.07 Refuse collection and glass recycling
Booth Hall 12 E17
01.10.02 Cullet transport
02.12.01 Treatment of used glass
PRODUCT OVERVIEW
PRODUCT DETAILS
GS100
1545
glasstec
glasstec
The GS100 System is an automated temperature measurement system for
glass bending, forming, annealing, and tempering processes.
The MP50 measures a line of 256 points using a rotating mirror that scans
a 90º field-of-view up to 48 times per second. The scanning of a glass part
is initiated by the measured temperature, or an external "trigger" signal. As
each heated glass part traverses the field-of-view, a two-dimensional
thermal image or "thermogram" is formed.
The MP50 installs easily, just like a camera, and views the glass part from
above... whenever it has a clear path. Connecting the pre-wired cables
(included) to a PC and entering installation dimensions in the GS100
Software completes the installation process.
MyCatalog
MyCatalog
COMPANY NEWS
Messe Düsseldorf
Search
Enter search key:
Benefits:
- Improve profitability and product quality
- Reduce set-up time
- Detect defects quickly
- Automate quality monitoring for ISO9000
- Reduce scrap
Messe Düsseldorf
Search
Enter search key:
Features:
- View complete thermal images and temperature profiles
- Define product-specific configurations and data files
- Customize and display zones overlayed on a thermal image
- Automatically analyze zone temperatures
- Fail-safe alarm logging
- Optional analog or digital outputs
- Languages supported: English, German, French, Finnish, and Italian
Mehr Informationen
Suchfunktion
Suchwort eingeben:
1546
glasstec
glasstec
RESIM®
Address Nádrazní 1062
511 01 Turnov
Czech Republic
Telephone 420-481-319452
MyCatalog
MyCatalog
* Synchronous drives for IS machines
* Servodrives for gob distributors, inverts and take-outs
* Control of pusher mechanisms
* Reject systems for automatic rejection of defective products
* Control of pushers into cooling arch feeders
* Lubrication control, cooling air fan control, EPS valves
* Technical support during installation of Futronic GmbH control systems
* Wiring, peripheral connections, mounting and technical support druing
commissioning
Fax 420-481-319469
Internet Address www.resim.cz
EMail
Booth Hall 13 B75
PRODUCT OVERVIEW
PRODUCT DETAILS
Manufacture and installation of electrical equipment for fee
* Servodrives with curve control for plunger and shear mechanisms on
DSP-3 feeders
* Temperature measurement and regulation systems for DSP-3 feeders
with Honeywell, Protronic, and ABB-Kent controllers
* Visualisation, process monitoring and diagnostics
Production and installation of electrical equipment for hand
Production and installation of complete electrical equipment
1547
glasstec
glasstec
MyCatalog
* Production, reconstruction and retrofit of electrical equipment for
product palletising
* Electrical equipment for palletiser feeder
* Production and installation of control of transport systems for pallet
handling
* Electrical equipment for svá ecí vozíky
* Retrofit of drives for cold end of production lines
MyCatalog
02.03.01.02 Grinding techniques for patterned glass
02.03.01.03 Grinding techniques for formed glass
COMPANY NEWS
Ausstellerdatenblatt
Mehr Informationen
Suchfunktion
Suchwort eingeben:
Exhibitor Data Sheet
Rohmer + Stimpfig Maschinen- und Apparatebau GmbH
Address Hans-Vogel-Straße 121
90765 Fürth
Germany
Telephone 0049-911-97989-0
0049-1761-9798922
Messe Düsseldorf
Search
Enter search key:
Fax +49-911-97989-40
Internet Address www.rohmer-stimpfig.de
Booth Hall 15 A23
PRODUCT OVERVIEW
1548
glasstec
glasstec
Exhibitor Data Sheet
Messe Düsseldorf
Search
Enter search key:
MyCatalog
MyCatalog
The principle of a SAVELINE-Sensor is based on the distinctive behaviour
of special ceramic materials.
·
If a hot spot occurs somewhere along the sensor the specific electrical
resistance of the ceramic used in the structure of the sensor increases at
that point. Different ceramic materials have different temperature range
characteristics.
·
Saveway GmbH & Co. KG
Address Wümbacher Straße 8
98704 Langewiesen
Germany
Telephone 0049-3677-8060-0
The change in resistance is evaluated by the measuring system and
conclusions can be drawn regarding a temperature profile of the refractory
in the area of the sensor. A SAVELINE-Sensor enables detection of the
highest temperature regarding local superheating over its entire length.
Schlemmer Prozess Systeme GmbH
Fax +49-3677-8060-99
Internet Address www.saveway-germany.de
Booth Hall 13 D33
Address Greising 40
94469 Deggendorf
Germany
Telephone 0049-991-29096-0
Fax +49-991-29096-46
PRODUCT OVERVIEW
Internet Address www.sps-gmbh.de
03.13.01 Alarm systems
Booth Hall 13 A10
PRODUCT OVERVIEW
PRODUCT DETAILS
SAVELINE-Sensor
·
In this case monitoring the refractory material condition is based on
detection of areas of superheating.
·
1549
glasstec
glasstec
COMPANY NEWS
Mehr Informationen
Suchfunktion
Suchwort eingeben:
MyCatalog
MyCatalog
SGCC
Address 105, rue du Fossé Blanc
92230 Gennevilliers
France
Telephone 0033-146-138434
Fax 0033-147-946560
Internet Address www.sgcc.com
Booth Hall 13 C77
Mehr Informationen
Suchfunktion
PRODUCT OVERVIEW
02.05.05 Components and accessories (Laser technology)
03.11.01.01.07 Machinery/tools
Suchwort eingeben:
Mehr Informationen
Suchfunktion
Suchwort eingeben:
PRODUCT DETAILS
The ATLAS
1550
glasstec
glasstec
The ATLAS is latest system to control Checks by CAMERA.
Conceived with 12 cameras, the ATLAS approach based on a learning
process with a good container will allow to improve drastically :
the performance of detectionthe job change time (20 minutes compared to
45 minutes)
The NCT (Non Conctact Thickness ) system
The NCT (Non Conctact Thickness ) system can be adapted on any SGCC
Multi inspections machines, as well as any Carroussel machines from our
competitors, such as the FPs , Checks + etc....
Available from One to Four levels of measures, the NCT's principle is
based on optical sensors placed 63mm away form the containers which will
measure the thickness of the glass on a 1 mm spot with the following
accuracy :
+/- 0,02 mm for light containers+/- 0,01 mm for standard containers
Thank's to such a system , you will reduced your maintenance cost (no
wearing parts), reduced labor (no periodic calibration) and improve the
Quality of your production.
Siemens AG, Automation and Drives
Address G.-Braun-Straße 18
76187 Karlsruhe
Germany
Telephone 0049-7215-9538-89
Fax +49-7215-9539-50
Internet Address www.siemens.com/Glass
MyCatalog
PRODUCT DETAILS
Network components
PROFIBUS networks can be configured with different transmission media
for a wide range of applications.
Electrical data transmission using shielded twisted two-wire cable with
circular cross-section as standard type; with PE or PUR sheath,
halogen-free version, buried cables or drum cables or cables specially
made for hazardous areas. Copper PROFIBUS cables can be quickly and
easily cut to length and terminated on site with the PROFIBUS
FastConnect system.Optical data transmission using fiber-optics cable with
glass or plastic fibers for indoor or outdoor areas, drum cable or
halogen-free version.Wireless data transmission via ILM (Infrared Link
Module) with a range of 15 meters.
Using OLM and OBT it is possible to set up an optical network with ring,
line or star topology.
Either bus terminals or bus connectors can be used to connect data
terminal equipment. Repeaters can be used to connect multiple bus
segment in series.
Different transmission media can be combined to form a hybrid network.
Socabelec S.A.
Address E. Vandervelde, 56
5190 Ham-sur-Sambre
Belgium
Telephone 0032-71-750228-210
Fax 0032-71-750248-211
Internet Address www.socabelec.com
EMail
Booth Hall 15 C13
Booth Hall 15 F55
PRODUCT OVERVIEW
MyCatalog
PRODUCT OVERVIEW
1551
glasstec
glasstec
COMPANY NEWS
MyCatalog
MyCatalog
Software & Technologie Glas GmbH
Address Bahnhofstraße 76
03051 Cottbus-Kiekebusch
Germany
Messe Düsseldorf
Search
Enter search key:
Telephone 0049-355-59020-0
Fax +49-355-541124
Internet Address www.stg-cottbus.de
Booth Hall 15 C07
PRODUCT OVERVIEW
Messe Düsseldorf
Search
Enter search key:
PRODUCT DETAILS
Messe Düsseldorf
Search
Ideal solutions for Automation tasks
Special Systems for Heat technology, Sensors, Process control and
process optimisation for industrial furnaces
Enter search key:
1552
glasstec
glasstec
Solartron Deutschland GmbH
Address Wittekindstraße 12
45470 Mülheim
Germany
Telephone 0049-2159-9136-500
Fax +49-2159-9136-505
Internet Address www.solartronmetrology.com
Booth Hall 12 C42
PRODUCT OVERVIEW
MyCatalog
MyCatalog
::
High Accuracy
::
Traceable calibration
Solartron s new family of Block Gauges makes precision measurements of
bores and cavities a simple and reliable process. More generally, the use of
these devices is recommended in applications where space is limited and
where the use of axial probes is not possible. The family of universal
gauges includes 2 mm, 5 mm and 10 mm measurement ranges, the 5 mm
unit is used in most gauging applications and the 10 mm unit is designed
for applications requiring a longer range. The 2 mm unit is a miniaturised
version in length, height and thickness and is recommended for
applications where space is very restricted. The block gauges are available
in LVDT, half bridge or digital variants, and offer unrivalled ruggedness,
accuracy and repeatability. All three units are extremely versatile and
provide datum surfaces and all the adjustments required for precision
gauging applications.
PRODUCT DETAILS
SYMPLEX Vision Systems GmbH
Digital and Analogue Universal Gauges
Block Gauge
::
2 mm, 5 mm and 10 mm Total Measuring Range
::
Repeatability: <0.25 µm
::
Compact size 2 mm unit
::
Digital, LVDT and Half Bridge
::
Pneumatic or Spring Actuation
::
Adjustable Anti-rotation Guide
::
All Stainless Steel Construction
::
Large Changeable Range of Tips
::
IP65 Protection
::
Good linearity over the full measuring range
Address Grüntenstraße 10a
80686 München
Germany
Telephone 0049-89-552798-0
Fax +49-89-552798-79
Internet Address www.symplex.de
Booth Hall 13 C76
PRODUCT OVERVIEW
PRODUCT DETAILS
Produkte
1553
glasstec
glasstec
MyCatalog
MyCatalog
02.07.01 Machines and equipment for the production of display glass
02.08.04 Machinery for the delamination of (glass) edges
02.09.02.03 Laminated glass technology with adhesives, casting resin and laminate
Torgauer Maschinenbau GmbH
Address Repitzer Weg 1
04860 Torgau
Germany
Telephone 0049-3421-7205-0
Fax +49-3421-7205-40
Internet Address www.tmb-torgauermaschinenbau.de
COMPANY NEWS
Mehr Informationen
Suchfunktion
Suchwort eingeben:
Booth Hall 15 F07
PRODUCT OVERVIEW
01.13.01 Feeding and stacking systems
Mehr Informationen
Suchfunktion
01.13.02 Transport and handling systems
Suchwort eingeben:
01.05.02 Glass drawing technique
01.05.03 Casting and rolling technology
01.10.06 Stacking machines
01.13.03 Conveying, sorting and storage facilities
01.13.04 Packing lines - boxes, shrinking, hoop-casing machinery
01.13.05 Warehouse technology
01.13.06 Glass racks for transport and warehouse
Messe Düsseldorf
Search
Enter search key:
01.13.09 Parts for conveying, transport, packing and warehouse technology
1554
glasstec
glasstec
VERTECH' Sarl
Address 6, rue Pierre Semard, B.P. 64
71880 Châtenoy le Royal
France
Telephone 0033-3-85981919
Fax 0033-3-85981918
Internet Address www.vertech.fr
MyCatalog
Incidents are entered in the system by technicians in real time.
All interventions for equipment adjustment or repair are recorded and
therefore available for maintenance staff.
For more complex incidents, you can create
« troubleshooting tips » with the procedures to apply.
The history of your incidents
As each incident is saved, the information is immediately recorded and
available between maintenance shifts. Moreover, the review of the machine
maintenance history may be very helpful before any intervention.
Data comparison
SILMaint may be linked to other VERTECH software.
For example, with SILC, you can integrate breakdown rates by production
number or by item in your reports.
Booth Hall 13 D82
PRODUCT OVERVIEW
MyCatalog
SILC
Real time monitoring system for your lines
With the increase in production machine speeds, the multiplicity of
inspection equipment and the light weight of glassware, glassmakers have
to supply their Cold End and Hot End operators with a logistical view of
their production lines.
With SILC, you are always aware of what is happening on your lines. SILC
is the best tool for your operators because it efficiently reduces their
reaction times along the lines. It has been proven that the payback is
around 6 months.
Functions
PRODUCT DETAILS
SIL Maint
For the maintenance of your plant
SIL Maint is an efficient software for CAMM (Computer Assistance
Maintenance Management) specially designed for glassmakers.
It enables maintenance department to reduce machine stop times thanks to
faster interventions and better prevention.
A global vision of your plant
All your equipment is listed with its components. In a few clicks you know
on which type of elements the most frequent breakdowns occur.
You can then make your technical decisions accordingly
Quick set-up
For a fast implementation, a library of machines and suppliers usually used
by glassmakers is included in SILMaint.
Additionally, VERTECH customizes your system on site.
Use on site
Internal pressure
Lehr exit controls
Losses
Losses per mould
Messages
Moulds management
Thicknesses per mould
Weight
1555
glasstec
glasstec
MyCatalog
Viprotron GmbH
Address Lise Meitner Str. 10
64293 Darmstadt
Germany
Telephone 0049-6151-80021-30
Fax +49-6151-80021-31
Internet Address www.viprotron.de
Booth Hall 14 D10
PRODUCT OVERVIEW
02.08 Insulation glass technology
02.09.01 Pre-tempering technology
02.09.02 Laminated glass technology
PRODUCT DETAILS
Quality-Scanner-IG
MyCatalog
In modern production process of insulated glass a reliable visual inspection
is indispensable to avoid cost intensive customer complaints. Present-day it
is standard to trust nearly exclusive in manual inspection. But such human
controls are not only extremely expensive, but also only restrictively
consistent. At the same time the expectations increases to rely 100% on
the quality. State of the art vision systems are today able to automate such
tasks with convincing results and also displace human inspectors for other
assignments.
With the Quality-Scanner-IG is now a low cost quality control system
available equipped with this innovative technology. Together with the
newest generation of intelligent CCD-cameras and an intuitive Windows
based user interface, the Quality-Scanner-IG takes charge of a reliable
In-Line quality control. Directly integrated into the production process of
insulated glass, this high performance system allows to guarantee your
customer a consistent and reproducible quality of the glass independent of
human motivation and abilities. Simultaneously a detailed documentation
and archiving of the quality is achieved which allows you to prove the exact
inspection details of a specific glass unit after even several months.
Furthermore the Quality-Scanner-IG offers enough potential to optimise
your productivity which automatically conducts to a preventive avoidance of
glass defects.
All visual defects like e.g. bubbles, scratches, stones, coating defects, tin,
dirt, finger prints, foil defects, etc. larger than 0,5 mm² will be easily
detected by the Quality-Scanner-IG. The user friendly Windows interface
allows you to define and illustrate the exact quality settings according to the
specific requirements of your customer.
The Quality-Scanner-IG which is completely integrated in the production
line after the washing machine, stops rejectable glass or gives a warning
signal before the glass will be further assembled. On the screen the
rejected glass will be visualized in details by displaying the precise
calculated defect positions within the defined quality zones. With such a
detailed visualisation your employee will easily be able to immediately
locate the defects on the glass. By integrating the Quality-Scanner-IG in
your production line you not only gain a high performance tool for improved
quality and productivity but also customer satisfaction and confidence.
http://www.viprotron.de/doc/Viproton_GPD_2005.pdf
1556
glasstec
glasstec
VMA - Gesellschaft für visuelle Messtechnik und
Automatisierung mbH
Address Gewerbegebiet
98704 Wümbach
Germany
Telephone 0049-36785-587-0
Fax +49-36785-51225
Internet Address www.vma-online.de
Booth Hall 14 E84
PRODUCT OVERVIEW
PRODUCT DETAILS
TM(C)
A comprehensive range of inspection systems is available. Special
emphasis is placed on non-contact thickness measuring instrument
The equipment shows a modular structure. They are made up of the
electronic unit (topside) with the LCD-touch-screen display and the
measuring computers the sensor heads (below), the light box and the tripod
system for positioning of the sensor heads.
One measuring computer and one sensor head are forming a measuring
channel each.
Up to four measuring channels can be put in an electronic unit.
The electronic unit is a compact 19" rack in an industrial enclosure.
The measuring computers are robust single-board computers.
MyCatalog
MyCatalog
The thickness is determined by means of comparing the reflections of a
light beam. The reflections are generated at the upper side as well as at the
lower side of the glass ribbon. The reflections are projected onto light
sensors using CCD (Charge Coupled Devices). The light is generated by a
halogene lamp having a lifetime of about 6 months.
Two measuring systems are in operation in the gauge head simultaneously
in order to
compensate measurement errors due to the non-parallel surfaces of the
glass ribbon.
At the same time, measuring errors due to any inclination between sensor
and glass are compensated. This compensating principle greatly enhances
the accuracy of measurement and is protected by Patents. A sophisticated
optical system transmits the reflections onto the sensors. Thus, a very high
measuring accuracy be can achieved despite of unevenness and inclination
of the glass surface.
The sensors are self controlled. They make sure that only reliable readings
are sent out.
The ovality is checked using the variations of the spacing between sensor
head
Our performances
Consultation Specialists in optics, electronics, software, handling and
cooling with many years of experiences in the glass industry give you
advice on the solution of your problems.
Analysis - Together with your specialists we analyse your process and take
down the layout of your plant for an optimisation of it.
Functional Specifications - We give support in formulating functional
specifications for a technically realizable and economically acceptable task.
Realization - We solve your problem by combining and adapting our
various products. Adaptation is done by variation of the optical, electronic,
mechanical and cooling parameters. Software is produced for your solution
individually.
Turnkey Systems - We deliver, install, put the system into operation and
train your operators and your service personnel.
Technical Service - A detailed documentation and the cooperation of our
specialists with your maintenance personnel are good preconditions for a
reliable and quick technical service.
Maintenance Service - We offer a mobile after-sales-service, also with
maintenance contract, if desired. In addition, we can check and calibrate
1557
glasstec
glasstec
MyCatalog
MyCatalog
your automation system regularly in order to realize your quality system.
Spare Part Service - The main expendable parts we have on stock.
Provision and production of spare parts are carried out as quick as
possible.
WITT-Gasetechnik GmbH & Co KG
Mehr Informationen
Suchfunktion
Suchwort eingeben:
Address Salinger Feld 4-8
58454 Witten
Germany
Telephone 0049-2302-8901-0
Fax +49-2302-8901-3
Internet Address www.wittgas.com
Booth Hall 12 D07
Messe Düsseldorf
Search
Enter search key:
PRODUCT OVERVIEW
XPAR Vision B.V.
01.06.13 Flash welding and fire polishing machines
Address Radesingel 50
9711 EK Groningen
Netherlands
Telephone 0031-50-3162888
Fax 0031-50-3162999
COMPANY NEWS
Internet Address www.xparvision.com
Booth Hall 13 C63
Mehr Informationen
Suchfunktion
Suchwort eingeben:
PRODUCT OVERVIEW
05.01.01.02 Measurement and control of viscosity
1558
glasstec
glasstec
MyCatalog
MyCatalog
with special hard-/software applications for automation of the forming
process. The XPAR-IGC (Infrared Gob Control) is an example of a
hardware add-on for automatic control of the gob weight.
Z. Bavelloni S.p.A.
Address Via Milano, 93
22070 Bregnano / CO
Italy
Telephone 0039-031-7283-11
PRODUCT DETAILS
Fax 0039-031-7286-358
Internet Address www.bavelloni.com
XPAR POLYSIGMA (Inspection & Process Monitoring)
The XPAR Polysigma is a Hot End Infrared Process Monitoring, Inspection
and Control system based on the latest infrared technology.
The system contains one infrared camera which is placed as close as
possible to the forming process, between the IS-machine and the coating
tunnel. From this position infrared images of newly formed containers are
captured and analyzed in real-time.
Process Monitoring
With the Process Monitoring software the glass forming process of each
cavity is real time monitored. With the information presented by the system,
the IS-machine settings can be adjusted leading directly to a better glass
distribution (higher product quality ), less rejects at the cold end and a
higher pack-to-melt ratio.
Booth Hall 16 C57
PRODUCT OVERVIEW
02.03.01.01 Grinding techniques for straight edges
Inspection
Thanks to the sensitiv infrared camera, the Inspection software detects and
rejects critical glass defects such as thin ware, birdswings, lenses, stones,
blisters, folds, freaks, leaners, offset finish, checks etc.
02.03.03 Matting / Supercalendering / etching / sand blasting technologies
02.03.05 Polishing technology
Hot End transport
Since the XPAR Polysigma is synchronized to the IS machine, the system
enables the hot end operator to monitor and adjust the transport / ware
spacing on the conveyor belt. Stuck and fallen ware is detected and
rejected.
Expandable configuration
To keep up with the rapid new infrared developments of XPAR Vision,the
hardware of the camera technology is designed as a modular concept. This
is to make sure that the XPAR Polysigma system- to comply with the
market demands - can be easily extended with a second camera (Dual
Camera Unit for increased inspection and process monitoring), as well as
04.02 Cutting, grinding and drilling tools
PRODUCT DETAILS
KAM
1559
glasstec
glasstec
MyCatalog
MyCatalog
KAM is specially designed for high-speed production of polished, shaped
engravings. These characteristics make it ideal for companies who have a
high production levels of this type of processing.
KAM is specially designed for high-speed production of polished, shaped
The 14 unit tool store means that the machine can hold all the tools you will
ever need.
COMPANY NEWS
Messe Düsseldorf
Search
Enter search key:
1560
FAIRGROUND MAP
HALL MAP, Hall: 10
EXHIBITOR
G72
B69
FC S.r.l.
Dow Corning GmbH
HALL MAP, Hall: 16
EXHIBITOR
F06
C57
D57
C59
F74
Forvet S.r.l.
Z. Bavelloni S.p.A.
Z. Bavelloni S.p.A.
Z. Bavelloni S.p.A.
C.M.S. Group
HALL MAP, Hall: 13
EXHIBITOR
D46
C76
C76
C33
C16
F09
A45
C77
D86
A92
A17
B62
C45
D31
D08
D33
B23
A17
D67
B75
D82
C63
E17
A10
A36
Buss & Partner GmbH
BBULL Technology, Stratec Control-Systems GmbH
SYMPLEX Vision Systems GmbH
Gedevelop AB
Eurotherm Deutschland GmbH
Optische On-line-Sensoren OPOS
Bock Energietechnik
SGCC
Precitec Optronik GmbH
Optische Pr fsysteme Dr. G nther
ilis GmbH
MSC Inspection Worldwide
ICS Inex Inspection Systems
IRIS Inspection Machines
Graphikon GmbH
Saveway GmbH & Co. KG
Busch und Spreen GmbH
Glass Service Inc.
LWN Lufttechnik GmbH
RESIM
VERTECH' Sarl
XPAR Vision B.V.
Advanced Control Solutions, Inc.
Schlemmer Prozess Systeme GmbH
Linde AG, Linde Gas Division
HALL MAP, Hall: 09
EXHIBITOR
G20
A44
Bentrup Industriesteuerungen
PDH Computersysteme GbR
HALL MAP, Hall: 15
EXHIBITOR
F49
C07
G12
C13
C28
D49
A23
A48
F55
F07
C21
ISRA SURFACE VISION GmbH
Software & Technologie Glas GmbH
OSAI S.p.A.
Siemens AG, Automation and Drives
JSJ Jodeit GmbH
Grenzebach Maschinenbau GmbH
Rohmer + Stimpfig Maschinen- und Apparatebau GmbH
Raute Precision Oy
Socabelec S.A.
Torgauer Maschinenbau GmbH
Nirvana Technologies (P) Ltd.
HALL MAP, Hall: 11
EXHIBITOR
D12
A59
B26
boraglas GmbH, Nanotechnologies in Glass
JENOPTIK Surface Inspection GmbH
Fraunhofer-Institut f r Silicatforschung ISC
HALL MAP, Hall: 17
EXHIBITOR
D20
D35
Helantec GmbH
LISEC GROUP
HALL MAP, Hall: 14
EXHIBITOR
E84
D10
E08
VMA - Gesellschaft f r visuelle Messtechnik und Automatisierung mbH
Viprotron GmbH
EDGETECH Europe GmbH
HALL MAP, Hall: 12
EXHIBITOR
C32
C42
A32
C50
B69
E17
D47
D05
B05
B25
A69
E06
D07
Land Instruments GmbH
Solartron Deutschland GmbH
Easy Automation S.r.l.
Agr International, Inc.
IMPAC Infrared GmbH
Raytek GmbH
GlasStress Ltd.
Dr. Schenk GmbH, Industriemesstechnik
MARPOSS GmbH
Blaumann S.a.s. di Benedetti Laura & C.
Nedo GmbH & Co. KG
Prodim International BV
WITT-Gasetechnik GmbH & Co KG

drupa mycatalog 2004

Transcription

Similar documents

Octatube Adverentie Challenging Glass 3

DocuCentre SC2020 - Quick Reference Guide

Glass instructions

campbell hall expansion

THE BEAUTY OF FLEXIBILITY

Seeburg M100C - Jukeboxhistory.info

Classroom “Chihuly” - Dick Blick Art Materials

PDF - 2.1 MB - Glasbau Hahn

A4 Leaflet Nov. 2011 (1)

Boston Globe Coverage of the same house