aboutcanada - Canadian Exports | Promoting Canadian Exports

Transcription

ABOUT CANADA
Population: 33 millions Territory: 9,984,670 sq.km.
There are more than 1.5 million registered businesses in Canada
Canada is the world’s second
largest country in total area.
Canada is a country occupying most of northern North America, extending from the Atlantic
Ocean in the east to the Pacific Ocean in the west and northward into the Arctic Ocean. It is
the world’s second largest country by total area and shares land borders with the United States
to the south and northwest.
CANADA CONSISTS OF:
The land occupied by Canada was inhabited for millennia by various groups of aboriginal people.
Beginning in the late 15th century, British and French expeditions explored, and later settled
along, the Atlantic coast. France ceded nearly all of its colonies in North America in 1763
after the Seven Years’ War. In 1867, with the union of three British North American colonies
through Confederation, Canada was formed as a federal dominion of four provinces. This began
an accretion of additional provinces and territories and a process of increasing autonomy from
the United Kingdom, highlighted by the Statute of Westminster in 1931 and culminating in the
Canada Act in 1982, which severed the vestiges of legal dependence on the British parliament.
10 PROVINCES
Alberta
British Columbia
Manitoba
New Brunswick
Newfoundland and Labrador
Nova Scotia
Ontario
Prince Edward Island
Quebec
Saskatchewan
3 TERRITORIES
Northwest Territories
Nunavut
Yukon
A federation comprising ten provinces and three territories, Canada is a parliamentary
democracy and a constitutional monarchy, with Queen Elizabeth II as its head of state. It
is a bilingual and multicultural country, with both English and French as official languages
both at the federal level and in the province of New Brunswick. Technologically advanced
and industrialized, Canada maintains a diversified economy that is heavily reliant upon its
abundant natural resources and upon trade, particularly with the United States, with which
Canada has had a long and complex relationship. Canada is a member of the G8, NATO, APEC,
the Organization for Economic Co-operation and Development (OECD), the Commonwealth of
Nations, the Francophonie, and the United Nations.
Canada is one of the world’s wealthiest nations, with a high per capita income. It is one of the
world’s top ten trading nations. Canada is a mixed market, ranking lower than the U.S. but higher
than most western European nations on the Heritage Foundation’s index of economic freedom.
Since the early 1990s, the Canadian economy has been growing rapidly, with low unemployment
and large government surpluses on the federal level. Today, Canada closely resembles the U.S. in
its market-oriented economic system, pattern of production, and high living standards.
ABOUT CANADIAN EXPORTS
“Canadian Exports” is
a publication that helps
International importers source
the products and services they
need from Canada.
Our services are:
• Identifying and checking out any Canadian businesses for you.
• Helping you contact them.
• Facilitating your negotiations with them.
• Arranging business travels to meet with them.
• Informing you about Trade Missions, Business Delegations, Trade Fairs, Payment
Terms and much more.
“Canadian Exports” matches Canadian & International businesses:
• Helps them find each other.
• Helps them meet.
• Helps them conclude successful business transactions.
“Canadian Exports” is:
• Credible: Since it is being distributed to members of Canadian and
non-Canadian chambers of commerce, business councils, import/export
associations … etc.
• Unique: there is no other publication in Canada like it.
• Affordable: It does not cost more than an ad in your local newspaper.
• Tax deductible: Your expenses to participate with us are 100% tax deductable.
• Wide Distribution: about 75,000 businesses in more than a 100 countries and
all 50 United States & it continues to grow.
• Follow-Up Support: Our customers have access to a wide range of export-related
services and guidance.
To receive “Canadian Exports”, free-of-charge:
Contact any of the following in your area: Canadian and non-Canadian chambers
of commerce, business councils and most of the import/export associations. If it is
not available, please contact us and we will send it to you.
• “Direct” Contact with “Interested” buyers: All contacts between you and
international businesses are direct, unless, you ask for our assistance. To receive
“Canadian Exports” is issued by Canadian Exports Inc.
“Canadian Exports” publication, contact the Canadian business council or chamber
of commerce in your country. Alternatively, follow the link “Join our Mailing List”
on our website and we will e-mail it to you for free. Be sure to visit our website
frequently as it is updated daily.
We offer assistance and guidance throughout the import/export process.
You are welcome to contact us at any step of the way.
To participate in Canadian Exports:
Write to the mailing address or
Call: 1-877-333-3014
Fax: +1(514)544-9063
[email protected]
Contact Person:
Ahmed Imran - President
Mailing address:
202-1315 Jules-Poitras,
Montreal – Qc,
Canada, H4N 1Y6
TABLE OF CONTENTS
CONTACT INFORMATION
MAILING ADDRESS:
TELEPHONE:
WEBSITE:
4R Business Services
TOLL FREE WITHIN CANADA & USA
www.canadianexports.org
1-877-333-3014
1051 Blvd. Decarie
P.O. Box: 53555 NPRGATE
Montreal-Qc.
Canada, H4L 3M0
FROM THE REST OF THE WORLD
+1-514-575-2022
FAX:
+1-514-357-5782
OFFICE HOURS:
E-MAIL:
[email protected]
To receive “Canadian Exports” e-magazine
to your e-mail, go to our website and join
our “Mailing List”, or simply send us an
e-mail indicating your wish.
Monday-Friday
9:30 AM - 4:00 PM (EST)
Thank you for your interest in Canada.
Aerospace & Aviation
Automotive & Transport
Chemicals & Pharmaceuticals
Construction
Control & Automation
Defense
Electrical & Electronics
Energy
Environmental
Food & Food Processing
Furniture & Wood
Health, Beauty & Fashion
Industrial Equipment, Services & Supplies
Machines/Machinery/Equipment
Marine: Products, Services & Supplies
Medical/Lab/Scientific Equipment, Supplies, Products
Metalworking & Metallurgy
Mining
Oil & Gas
Packaging, Shipping, Forwarding
Plastics
Precision Equipment & Related Services
Sports & Recreation
Telecommunications
Textile & Clothing
6
7
8
11
13
16
19
22
22
23
23
24
26
28
30
31
31
33
33
34
35
36
37
38
39
06
07
CANADIANEXPORTS
CANADIANEXPORTS
Automotive & transportation
aerospace & Aviation
A-Line Precision Tooling
CONTACT INFO:
Rob Muru
President
51 McCormack St
YORK, Ontario
Canada, M6N 1X8
Tel: +1 (416) 769-4557
Fax: +1 (416) 769-7975
[email protected]
www.a-linetool.com
A-Line Precision Tooling has employed
highly skilled machinists and toolmakers
to satisfy most of the volume machining
requirements of our customers and also
their prototyping demands for R&D
functions such as one-off and special
tooling needs for Automation and
Engineering. We support your company
with experienced engineers who can help
offload the rush of a new products delivery.
Our team of more than 20 manufacturing
specialists are dedicated to provide you with
full support, 7 days per week, 24 hours
per day. To help you make your project
deadlines you can rely on us, we have
over 37 years of tooling and machining
experience. Call us and we will tell you how
we can help you achieve your project goal
with less worry and greater ease.
DLL Inc.
M.P.T. Inc.
CONTACT INFO:
Mike Pearson
President
P.O. Box 788
DRESDEN, Ontario
Canada, N0P 1M0
Tel: (519) 683-6122
Fax: (519) 683-6028
[email protected]
www.mptinc.com
M.P.T. Manufacturing Process Technologies
Inc. has been delivering quality custom
automation & control solutions since 1990.
We are ISO 9001 certified. Our global
customer base includes leading automotive,
die-casting, heavy industrial, aerospace,
plastics and consumer products companies.
Our goal is to provide you with a solid
technology foundation to support operations
excellence and profitable growth.
M.P.T. Inc. offers a full range of design,
engineering and build services under
one roof. Our robust custom solutions
are backed by the industry leading 3
year M.P.T. warranty. We can meet all
your custom automation requirements
including material handling; process
and assembly cells, robotic integration,
nut runner tool integration, SCADA, test
measurement & inspection and custom
industrial controls & software.
TRACC
We have the pleasure to introduce DLL Inc
as a North American industrial leader in the
manufacturing and repairing of high tech products.
CONTACT INFO:
Annie LeBlanc
Vice President
In October 1995, DLL Inc was created by its
actual president Laurent Leblanc in Quebec,
Canada as a small manufacturing company with
only 4 employees. Today the company includes
three divisions: Railway, Petroleum and Industrial
with more then 40 full time employees.
CONTACT INFO:
Dale Richard
Sales Manager
“TRACC” as we have come to be known is
engaged in the collection, transportation,
shredding, crumbing, and the
re-manufacturing of new products from
scrap tires. Located in the Minto Industrial
Park, “TRACC” operates in a 40,000 square
foot facility constructed on a 16.6 acre site.
TRACC began full scale operation in May,
1997 and has continued in successful full
scale operations for the last 10 years.
600 Industriel Blvd, Suite E
SAINT-JEAN-SUR-RICHELIEU, DLL Inc serves the Railway, the Petroleum and
Québec Canada, J3B 4S7 the Industrial market through its activities in the
fields of manufacturing new products. DLL Inc
Tel: +1 (450) 346-7044
also supply rebuild parts as Utex, Outright or on
Fax: +1 (450) 346-0643
Repair-Return base. The company’s expertise lies
[email protected] www.dllinc.com in the design, development and manufacture of a
comprehensive range of electrical and mechanical
components, while maintaining good quality,
reasonable price level and quick turnarounds.
149 Minto Industrial Park Rd.
MINTO, New Brunswick
The Province of New Brunswick disposes
Canada, E4B 3A6
of approximately 1,000,000 scrap tires
annually. Allowing for normal spillage of
Tel: +1 (506) 327-4355
Fax: +1 (506) 327-3757 20% due to scrap tires being recapped and
other uses, TRACC will collect and process
[email protected] approximately 1,000,000 passenger tire
www.traccnb.ca
equivalents (PTES) per year. This will
represent approximately 13,000,000
pounds of recycled rubber to be processed.
Techmire
Nortruck
Techmire was founded in 1973, and is
today the world leader in the design and
manufacture of multiple-slide die-casting
CONTACT INFO:
systems for precision components in zinc,
lead and magnesium alloys. Headquartered
Leela Hardat
in Montreal, Canada, Techmire has full
V.P., Marketing & Sales
turnkey systems capability, including design,
manufacture and testing of die-casting
185 rue Voyageur
machines and tooling, training of customers’
Pointe-Claire, Québec
operators and maintenance personnel, and full
CANADA H9R 6B2
after-sales service. Refurbishing of Techmire
Tel: 514-694-4110, ext 232 die-casting systems and major components
Fax: 514-694-2634
is also undertaken. Techmire’s customers
range in size from large multinational
[email protected]
corporations to small custom die-casting
www.techmire.com
companies, and are located in more than 30
countries. These companies use Techmire
equipment to produce thousands of different
die-cast components for a broad spectrum
of industries, including: Automotive,
Construction, Electrical /electronics,
Consumer products & Home appliances. ISO
9001:2000 registered QMS
CONTACT INFO:
Phil Doublet
Vice President
7 - 1231- 36th Ave NE
CALGARY, Alberta
Canada, T2E 6N6
Tel: (403) 250-5355
Fax: (403) 250-9371
[email protected]
www.nortruck.com
We make the best products in our industry. The
best designed, the best made and providing the
best value. Our customers depend on us to deliver
long-lasting, great-looking truck accessories such
as canopies, sleepers, toppers, tool sheds and
other value-added products. These make their
trucks work better, increasing their value, duty
cycle and service life. By making their fleets more
productive, our clients save money, increase
productivity, and ultimately gain competitive
advantages. Our unique line of trailer barbeques
also help our customers make the statement
that they understand and value high quality
and craftsmanship. If you want the best, at an
affordable price, call Nortruck. At Nortruck,
customer satisfaction is our highest priority. From
our initial meetings through delivery, we ensure
we are “on the same page” as you are. We always
strive to create close, long-term relationships with
you to ensure that the products you purchase fully
meet your unique needs.
08
09
CANADIANEXPORTS
CANADIANEXPORTS
chemicals & pharmaceuticals
Caledon Laboratories Ltd.
CONTACT INFO:
David Brock
Sales Manager
40 Armstrong Ave.
GEORGETOWN, Ontario
Canada, L7G 4R9
Tel: +1 (905) 877-0101
Fax: +1 (905) 877-6666
[email protected]
www.caledonlabs.com
Caledon is an independent Canadian
company with over three decades of
experience in the purification and
packaging of High Purity Solvents and
Laboratory Chemicals. Our headquarters
and manufacturing plant is located near
the scenic Caledon Hills of Southern
Ontario. Caledon’s skilled and dedicated
team is devoted to providing outstanding
personal service, quality products and
quick delivery from our warehouses in
Alberta and Ontario. We believe that
you will easily find the information you
need. You can search for items, view
specifications, order online, or just pick
up the phone and call us. Our pledge is
that you will always receive the quality and
service that you expect.
Canadex Laboratories Inc.
CONTACT INFO:
Fayez Chehab
President
707-725 Fortier Place
SAINT-LAURENT, Québec
Canada, H4L 5B9
Tel: +1 (514) 747-2493
Fax: +1 (514) 747-7550
[email protected]
www.canadexlabs.com
Canadex Laboratories specializes in
research and development, custom
formulations, and state of the art
manufacturing. For over 25 years, Canadex
has been a leading manufacturer with
extensive product lines of pharmaceutical
grade health care products including
all-natural vitamins, minerals, botanicals,
and high-quality health supplements.
Canadex is committed to developing
the finest products available using only
the best raw materials and cutting-edge
technology.
Canadex Laboratories is well positioned in
the health and wellness market, with an
in-house FDA registered pharmaceutical
manufacturing facility and quality control
analytical labs.
CONTACT INFO:
Bruce Bradley
Polymer Sales Manager
Prag Khatri
Adhesive Sales Manager
465 Coronation Dr.
SCARBOROUGH, Ontario
M1E 2K2
Tel: +1 (416) 284-6111
Fax: +1 (416) 284-6932
[email protected]
www.halltech-inc.com
Halltech Inc. is a Canadian manufacturer of
polymer emulsions and industrial adhesives,
and a supplier of natural gums and starches
with facilities in Ontario and Quebec, where our
division Polycol ensure the needs of our Quebec
customers are met.
CONTACT INFO:
Halltech’s extensive variety of proven adhesives,
water-based emulsion polymers and natural
products are at home in a wide range of industrial
environments. Some of the industries for which
we manufacture industrial adhesives or polymer
emulsion products are: textile finishing, coatings,
sporting goods, woodworking, automotive, paint,
paper products, filter tipping, insulation, labeling,
fire retardants, PU foam, rubber solutions,
resin solutions, duct liners, tapes, laminating,
tube winding, print bonding, spray bonding,
construction, packaging, footwear, and other
industries that use either wood glues, contact
cements, hot melt products or others.
Tel: +1 (416) 284-6111
Fax: +1 (416) 284-6932
RoadPacker Group Ltd.
CONTACT INFO:
Michael A. McDermott
CEO, Owner
Biovectra dcl
Halltech Inc.
Halltech Inc.
Welcome to the website of The RoadPacker
Group - one of the world’s fastest growing
soil stabilization companies. We specialize
in environmentally safe, water soluble
chemicals for soil stabilization, soil
compaction, dust suppression and other
soil stabilizing related products.
105-150 Crowfoot Cres NW,
How we started: In 1990, RoadPacker
Suite 209 CALGARY,
Alberta Canada, T3G 3T2 began initial market research in Australia
into the field of chemical soil stabilization.
Tel: +1 (403) 201-7444
The research identified a market for
Fax: +1 (403) 770-8375 this type of product, within a road
construction and maintenance industry
[email protected]
that was spending billions of dollars
www.roadpacker-group.com
each year. At local, as well as national
levels - many administrations/governments
were spending as much as 50% of their
entire budget on roads. Aided by the
advances in chemical technology during
the last 30 years, ongoing research led to
the development of a new chemical soil
stabilizer called RoadPacker Plus.
Prag Kahtri
Sales Manager
465 Coronation Dr.
Canada, M1E 2K2
[email protected]
polymer emulsions and industrial adhesives,
and a supplier of natural gums and starches
with facilities in Ontario and Quebec, where our
division Polycol ensure the needs of our Quebec
customers are met.
CONTACT INFO:
products are at home in a wide range of
industrial environments.
Tel: +1 (902) 566-9116
Fax: +1 (902) 628-2045
Krystine
Acct & Cust. Serv.
11 Aviation Ave,
St. Charlottetown- PEI,
Canada, CIE 2A6
We are an Eastern Canadian pharmaceutical/
biologic manufacturer with over 35 years of
experience serving a global customer base.
BioVectra provides small to large scale custom
manufacturing of advanced intermediates, active
pharmaceutical ingredients and biologics along
with a complement of core products targeted
toward bioprocessing.
[email protected]
www.biovectra.com
Therapure Biopharma Inc.
Apotex Fermentation Inc.
CONTACT INFO:
CONTACT INFO:
Dirk Alkema
V.P. Operations
2585 Meadeonpine Blvd.
Mississauga, ON, CANADA
Canada, L5N 8H9
Tel: +1 (905) 286-6200
Fax: +1 (905) 286-6300
[email protected]
www.therapurebio.com
Therapure Biopharma Inc. is a Canadian
biopharmaceutical company committed to the
development, manufacture, purification, and
packaging of high-quality biological therapeutics.
We provide our clients and partners with
customized solutions for the development
and manufacture of complex biological
products, leveraging our flexible, modern cGMP
manufacturing facility, our extensive quality
systems and the dedication of our highly
experienced staff.
Bogdan Comanita
Bus. Dev. Director,
50 Scurfield Blvd,
WINIPEG, Manitoba
Canada, R3Y 1G4
Tel: +1 (204) 989-6830
Fax: +1 (204) 989-9160
[email protected]
www.apoferm.mb.ca
Apotex Fermentation Inc. (AFI) is part of the
Apotex Group of Companies, the largest Canadianowned pharmaceutical group in Canada.
AFI is in the business of discovery and
development fermentation-based technologies
for the production of Active Pharmaceutical
Ingredients (APIs) and the manufacture APIs for
eventual sale as final dosage forms in Canada
and internationally.
Corporation Scientific Claisse
EnviroSan Products
CONTACT INFO:
CONTACT INFO:
Robert Verville
General Manager
Parc Technologique du Qc
Métropolitain
350, rue Franquet,Suite 45
QUÉBEC, Québec, G1P 4P3
Tel: +1 (418) 656-6453
Fax: +1 (418) 656-1169
[email protected]
www.claisse.com
World leader and the first in its field in the
development of analytical fusion techniques,
instrumentation and fine chemistry science,
Claisse isWorld-renowned for its outstanding
achievements in the development of inorganic
sample preparation by fusion for XRF, AA, ICP
and wet chemistry analysis. Our main customers
are cement plants, mining companies and lime,
bauxite, aluminum, ferroalloys, steel, pure
metals, catalysts, polymers, ceramics, glass,
petroleum and oil companies. We also serve
universities and laboratories that are involved
with geology and mineral prospecting.
Paul Marks
President
170, Alexandra Blvd
Toronto, Ontario
Canada, M4R 1M4
Tel: +1 (416) 483-5580
Fax: +1 (416) 483-5539
[email protected]
www.envirosan.com
Replace toxic chemicals & hazardous solvents
with… The Original Colloidal Cleaner, Colloidal
Cleaner, Colloidal Cleaner; Manufactured and
Packaged by EnviroSan Products. Manufacturer
and Marketer of over 200 Sanitation and
Specialty Chemical Products, many of which are
Environmental and User Friendly.
Federal, Provincial, State and Local approvals,
U.S.A., Europe and Canada. Industry Approvals
and letters of recommendation.
10
11
CANADIANEXPORTS
CANADIANEXPORTS
CONSTRUCTION
Bastien Industries
CONTACT INFO:
BASTIEN INDUSTRIES is located north of
Quebec city at Village Huron (Wendake). Our
Ginette Bastien
company is famous for the excellence of his
Owner
moccasins, snowshoes and Indian novelties.
160, rue Jeune Lorette
Maurice Bastien, former Grand Chief of
WENDAKE, Québec
Huron-Wendat tribe, was an expert in the
Canada, G0A 4V0
production of snowshoes, to which he confined
his manufacturing operations until he started
Tel: +1 (418) 842-1330
the manufacture of moccasins. The popular
Fax: +1 (418) 842-1330
HIAWATHA brand of hand beaded moccasins,
[email protected] which bear the skilful needlecraft of the majority
of the women of Wendake village, are distributed
www.bastienindustries.ca
to many parts of the world.
CONTACT INFO:
Steve Caslick
VP Sales & Marketing
P.O. Box 1420
WALKERTON, Ontario
Canada, N0G 2V0
Tel: +1 (519) 881-1320
Fax: +1 (519) 881-3593
[email protected]
www.larsenhinge.com
Vorum Research Corporation
CONTACT INFO:
Vorum Research Corporation was founded in 1989
by Carl Saunders, co-developer of the world’s first
Jesse Wood
computer-aided design and manufacturing (CAD/
Marketing Mgr.
CAM) system for the prosthetics and orthotics
6-8765 Ash St
(P & O) industry. With an emphasis on computer
VANCOUVER, British Columbia
systems, Vorum provides pre-packaged productivity
Canada, V6P 6T3
tools, custom solutions and consulting services for
the P & O industry.
Tel: +1 (604) 321-7277
Fax: +1 (604) 321-5345
[email protected]
www.vorum.com
CONTACT INFO:
Toronto Research Chemicals
Andrew Karagias
Operations Manager
2 Brisbane Rd
NORTH YORK, Ontario
Canada, M3J 2J8
Tel: +1 (416) 665-9696
Fax: +1 (416) 665-4439
[email protected]
www.interlog.com
We (TRC) are a world leader in the manufacture of
complex organic chemicals for biomedical research.
We supply products world-wide to a client base
including major biotechnology based corporations
, pharmaceutical and diagnostic companies,
manufacturers of specialty chemicals as well
as to researchers at hospitals, universities and
research institutions. TRC was founded in 1982
as a Canadian-owned corporation.
A leading manufacturer of top quality custom
and standard continuous hinges, butt hinges and
furniture hardware in various materials since 1919.
We are The Hinge People®. We produce quality
hinge solutions by providing customers responsive,
reliable on-time delivery at a competitive price.
Larsen & Shaw, a family owned and operated
business, was established in 1919, primarily serving
the hardware needs of the furniture industry. Today,
as a leading manufacturer of continuous & butt
hinges and hardware metal stampings, we build on
the solid reputation provided by our history of tooling
and production innovations.
We currently produce products for: Toolboxes,
Electrical boxes, Appliances, Boats,
Emergency vehicles, Truck bodies, Washroom
equipment, Lockers, Furniture, Automobiles
& buses, a multitude of OEM and Distribution
Industries, and much more…..in short, Larsen
& Shaw products are everywhere!
Sky-Hi Scaffolding Ltd.
Frank McKenna
Sales Manager
CONTACT INFO:
Moderne Slate Roofing Systems
Larsen & Shaw
Since 1968, Sky-Hi Scaffolding Ltd. has
gained an enviable reputation for versatility
and innovation in the construction, access,
shoring, fall protection and training fields.
This is matched by the company’s pride in
delivering only the highest level of customer
service and satisfaction.
3195 Production Way
BURNABY, British Columbia Whether scaffolding is needed for
residential or commercial construction,
Canada, V5A 3H2
heavy industry such as pulp mills, refineries
or any other building project, the company
Tel: +1 (604) 291-7245
Fax: +1 (604) 299-3117 has a proven record of tackling difficult
projects and finding, cost-effective
[email protected]
solutions. However, Sky-Hi never has, nor
www.sky-hi.com
will, sacrifice safety to lower costs.
Sky-Hi can provide that all-important
leading edge.
CONTACT INFO:
Dale Richard
Sales Manager
Moderne Slate Roofing Systems by TRACC
has involved years of research and study.
When the idea of creating a viable recyclable
shingle came to light it was known that this
shingle had to be significantly better than
those on the market.
TRACC set about gaining the services of
experts in the roofing field and the plastics
Canada, E4B 3A6
field, testing and retesting materials to make
sure that the product was 100% recyclable.
Tel: +1 (506) 327-4355
Fax: +1 (506) 327-3757 We also wanted to make sure that it would
gain the approval of what a roofer would
[email protected]
look for in a shingle so we enlisted the help
www.moderneslate.ca
of veteran roofers collaborating and gaining
there input. We invite you to examine
Moderne Slate, so much though we have
put a 50 year transferable warranty on the
product. A product guaranteed to satisfy you
for years to come.
Techmire
Techmire was founded in 1973, and is
today the world leader in the design and
manufacture of multiple-slide die-casting
CONTACT INFO:
systems for precision components in zinc,
lead and magnesium alloys. Headquartered
Leela Hardat
in Montreal, Canada, Techmire has full
turnkey systems capability, including design,
manufacture and testing of die-casting
185 rue Voyageur
CANADA H9R 6B2
after-sales service. Refurbishing of Techmire
Tel: 514-694-4110, ext 232 die-casting systems and major components
Fax: 514-694-2634
is also undertaken. Techmire’s customers
range in size from large multinational
[email protected]
corporations to small custom die-casting
www.techmire.com
companies, and are located in more than 30
countries. These companies use Techmire
equipment to produce thousands of different
die-cast components for a broad spectrum
of industries, including: Automotive,
Construction, Electrical /electronics,
Consumer products & Home appliances. ISO
9001:2000 registered QMS
Reliable Metal Buildings Inc.
CONTACT INFO:
Reliable Metal Buildings operates out
of Carlyle, Saskatchewan, Canada. Our
Andy Robertson
10,000 square foot plant is located one
Owner
mile east of Carlyle on #13 Highway. Our
location is central to the Oil & Gas industry
P.O. Box 985
in southeast Saskatchewan. “Reliable”
Carlyle = SASK
has been fabricating metal for 16 years in
Canada, S0C 0R0
continuous eavestroughing and commercial
custom flashings. In 1996, we began
Tel: +1 (306) 453-6410
Fax: +1 (306) 453-6775 manufacturing and erecting self framing
metal buildings along with roll forming
[email protected] standing-seam metal roofing.
www.reliablemetalbuildings.com
Valiant Machine & Tool Inc.
CONTACT INFO:
Todds Hansens
Owner
9355 Anchor Dr.
WINDSOR, Ontario
Canada, N8N 5A8
Tel: +1 (519) 974-5200
Fax: +1 (519) 979-0415
[email protected]
www.valiantmachine.com
Valiant is a company built with many hands
and a single vision. Since opening in 1959,
the automotive, aerospace, construction and
forestry equipment supplier has recognized
challenges for the opportunities they present.
Through all of the years, Valiant has never
lost focus of its primary mission: to serve the
customer with innovative problem solving
ideas. Valiant has managed to not only adopt
the newest technologies and processes but,
has maintained a strong connection with its
roots of tradition and craftsmanship.
12
13
CANADIANEXPORTS
CANADIANEXPORTS
control & automation
CONSTRUCTION
Unicel Architectural Corp.
Larsen & Shaw Limited
CONTACT INFO:
Manufacturer of custom aluminum and glass
products such as Vision Control hermetically
Malinda Iordan
sealed glass units with integral operable
Mktg. Coordinator
louvers made of extruded aluminum. Blinds
2155 Fernand Lafontaine Blv can be operated by manual crank handles,
LONGUEUIL, Quebec
thumbwheels, or motors. Unicel fabricates
Canada, J4G 2J4
skylights, curtain walls, sunrooms.
CONTACT INFO:
Tel: +1 (450) 670-6844
Fax: +1 (450) 670-7144
Tel: +1 (519) 881-1320
Fax: +1 (519) 881-3593
[email protected]
www.unicelarchitectural.com
Unicel Inc., founded in 1964, specializes in
the manufacture of glazed aluminum structures
such as skylights, curtain walls, contemporary
sunrooms, Victorian conservatories, door
inserts, and window systems for the residential,
commercial, and institutional markets.
Steve Caslick
P.O. Box 1420
WALKERTON, Ontario
Canada, N0G 2V0
[email protected]
www.larsenhinge.com
A leading North American manufacturer of top
quality custom and standard continuous/piano
hinges, architectural hinges, butt/strap/tee/lift
off/stop/spring hinges, and metal stampings
(brackets/braces) used in enclosure/cabinet/
tool box, appliance, vehicle hardware, industrial/
agricultural/transportation equipment, furniture
and architectural hardware industries.
We are The Hinge People®, ISO Quality
Management certified, following LEAN
manufacturing principles, enabling us to focus
on our customers’ requirements .
Moderne Slate Roofing Systems
CONTACT INFO:
CONTACT INFO:
Dale Richard
Sales Manager
Canada, E4B 3A6
Tel: +1 (506) 327-4355
Fax: +1 (506) 327-3757
[email protected]
www.moderneslate.ca
Moderne Slate Roofing Systems by TRACC has
involved years of research and study. When the
idea of creating a viable recyclable shingle came
to light it was known that this shingle had to be
significantly better than those on the market.
TRACC set about gaining the services of experts
in the roofing field and the plastics field, testing
and retesting materials to make sure that the
product was 100% recyclable. We also wanted
to make sure that it would gain the approval of
what a roofer would look for in a shingle so we
enlisted the help of veteran roofers collaborating
and gaining there input.
Welcome to The RoadPacker Group - one of
the world’s fastest growing soil stabilization
companies. We specialize in environmentally
CEO, Owner
safe, water soluble chemicals for soil
105-150CrowfootCresNW,Suite209 stabilization, soil compaction, dust suppression
CALGARY, Alberta
and other soil stabilizing related products.
Canada, T3G 3T2
We Manufacture Soil Stabilization and Dust
Control products for the Road Construction and
Tel: +1 (403) 201-7444
Fax: +1 (403) 770-8375
Low Cost Housing Industry. Our products are
used in the strengthening of road sub-base and
[email protected]
www.roadpacker-group.com in the manufacturing of Stabilized Earth Bricks.
Vidir Machine Inc.
CONTACT INFO:
David Mills
National Accounts Manager
US Sales Office
179 US Hwy. 27 North, Suite G.
Clermont – Florida
USA, 34711
Vidir has designed the most advanced, durable
and easy to operate storage and display systems
in the market today. All our products are
Toll Free: 1-866-898-4347 engineered to ensure minimal maintenance.
Tel: +1 (352) 243-7310
Fax: +1 (352) 243-7320
We specialize in storage systems for spooled
products such as wire, cable and hose; rolled
[email protected]
products such as carpet, vinyl, flooring, fabric
www.vidir.com
and papers. More recently we have expanded
our market to include storage solutions for
tires, shelving and pan requirements.
DLL Inc.
Libart Enclosure Systems Ltd.
CONTACT INFO:
CONTACT INFO:
Sales Manager, Canada
9070 Rue de Champ D’eau
St. Leonard – Qc,
Canada, H1P 3M4
Tel: +1 (418) 822-1448
Fax: +1 (418) 822-1533
[email protected]
www.gammaindustries.ca
Gamma has successfully achieved its superior
reputation in the North American market as
a result of almost 40 years of experience in
fabrication and installation of architectural glass
and aluminum products of utmost high quality.
For all of our aluminum products, be it doors,
windows, curtain-walls or building envelopes,
Gamma always has the right solution adapted to
its client’s needs.
Office Administrator
110-7391 Vantage Way
DELTA, British Columbia
Canada, V4G 1M3
Tel: +1 (604) 952-5150
Fax: +1 (604) 648-9919
[email protected]
www.libart.com
We manufacture sell and install retractable pool
buildings. Fully engineered to meet international
and local building code standards, with a full
line of standard building types and custom
optional upgrades and accessories. Structural
aluminum frames with polycar -bonate and
acrylic glazing. Buildings allow an area to be
fully covered and protected and within minutes
fully opened.
CONTACT INFO:
John McGraw
Owner
1925 Hanwell Rd.
HANWELL, New Brunswick
Canada, E3C 1M4
Tel: +1 (506) 455-1925
Fax: +1 (506) 459-3400
Annie LeBlanc
Vice President
The Panel Shop Inc. began operations
in 1995. It currently employs 10 people
including engineers, technicians, and
support staff. The shop is certified by
the Canadian Standards Association to
manufacture industrial control panels to
CSA C22.1#14 and UL 508A. Our panels
are therefore certified for use in Canada
and the United States.
The Panel Shop Inc.’s Quality Control System
is ISO 9001:2000 registered with QMI.
We would like you to learn more about our
[email protected] company and staff, how to reach us and what you
www.thepanelshop.com think of our products, services and our website.
Learn about our company and how it started
in our profile. Let us know what you think of
our company, our products and services or
our website with our feedback form. We want
to know what you think.
Hollbrit Inc.
CONTACT INFO:
Gamma Murs et Fenêtres Int’l
Vidir Machine Inc., located in central
Manitoba Canada, has grown to become
a leading supplier of both motorized
and non-motorized storage and display
systems. We have been selected as the
equipment supplier for major retailers
throughout the world and pride ourselves
in our ability to resolve storage concerns
of our customers.
The Panel Shop
Tel: +1 (450) 346-7044
Fax: +1 (450) 346-0643
CONTACT INFO:
Glyn Williams
Owner
7-105 Industrial Dr.
WHITBY, Ontario
Canada, L1N 5Z9
Tel: +1 (905) 665-8812
Fax: +1 (905) 665-8815
We Design and Build Automated Welding
& Grinding Systems for the Sheet Metal
Manufacturing Industry. Hollbrit Inc. is
committed to providing innovative, costeffective, quality welding and grinding
equipment to the sheet metal manufacturing
industry. It is our goal to ensure our customers
will improve their productivity and quality
through the use of the equipment we build.
All of our systems can be customized to work
within your plant or facility and we can design,
engineer, build, deliver, train and support
custom systems to meet the challenges of
your manufacturing facility.
Main production line includes: Seam Welding
[email protected]
and Grinding (For large panels and boxes),
www.hollbrit.com
Aluminum Seam Welding and Grinding,
Corner Grinding, Robotic Seam Welding, Stud
Welding Equipment & Automated Lines.
14
15
CANADIANEXPORTS
CANADIANEXPORTS
Dylis Innovative Systems
The Panel Shop
CONTACT INFO:
CONTACT INFO:
Joe Mota
President
1401 Meyerside Dr
MISSISSAUGA, Ontario
Canada, L5T 1G8
Tel: +1 (905) 564-6436
Fax: +1 (905) 564-7840
[email protected]
www.dylis.com
Dylis Innovative Systems has been a designer
and manufacturer of intelligent automation
based solutions for more than ten years.
Our commitment to quality and customer
satisfaction is reflected in all we do from simple
workstations to turnkey assembly lines. All
of our equipment is built utilizing standard
components in a custom engineered solution.
Dylis Innovative Systems started out in the field
of flexible automation providing robotic tooling
and fixturing solutions to local manufacturers.
John McGraw
Owner
1925 Hanwell Rd.
Canada, E3C 1M4
Tel: +1 (506) 455-1925
Fax: +1 (506) 459-3400
[email protected]
www.thepanelshop.com
The Panel Shop Inc. began operations in 1995. It
currently employs 10 people including engineers,
technicians, and support staff. The shop is
certified by the Canadian Standards Association
to manufacture industrial control panels to
CSA C22.1#14 and UL 508A. Our panels are
therefore certified for use in Canada and the
United States.
The Panel Shop Inc.’s Quality Control System is
ISO 9001:2000 registered with QMI.
company and staff, how to reach us and what you
think of our products, services and our website.
Vidir Machine Inc.
Smith Induspac Limited
CONTACT INFO:
Vidir Machine Inc., located in central Manitoba
Canada, has grown to become a leading supplier
David Mills
of both motorized and non-motorized storage and
National Accounts Mgr.
display systems. We have been selected as the
US Sales Office
equipment supplier for major retailers throughout
179 US Hwy. 27 North, Suite G. the world and pride ourselves in our ability to
Clermont – Florida, USA, 34711
resolve storage concerns of our customers.
CONTACT INFO:
Toll Free: 1-866-898-4347
Fax: +1 (352) 243-7320
Tel: +1 (613) 742-6766
Fax: +1 (613) 836-2536
[email protected]
www.vidir.com
Festival City Fabricators
Rotork Controls (Canada) Ltd.
Techmire
CONTACT INFO:
Our design and fabricating experience led to us
being the major supplier of pressure vessels to
Chris Wyatt
the Hibernia Offshore Oil Project. We supplied
Sales & Mktg. Manager
major vessels to the Sable Offshore Energy
P.O. Box 339
Project and presently are suppliers to the Suncor
STRATFORD, Ontario
Oil Sands project. Regular customers include
Canada, N5A 6T3
Cooper Energy Services, Babcock Wilcox,
Bayer, Morton International, Uniroyal, and Nova
Tel: +1 (519) 271-4751
Fax: +1 (519) 271-1092
Chemical. Commitment to quality in all areas,
evidenced by our ISO 9001, ASME U, S, and
[email protected]
www.clemmersteelcraft.com H stamps, National Board R stamp, B31 for
piping, TSSA and CSA B51.
CONTACT INFO:
CONTACT INFO:
Philip Doyle Manufacturing
Stream-Flo Industries Ltd.
CONTACT INFO:
CONTACT INFO:
Marketing & Sales Manager
95 Covington St
HAMILTON, Ont
Canada, L8E 2Y4
Tel: +1 (905) 561-0545
Fax: +1 (905) 561-5858
[email protected]
www.philipdoyle.com
Since 1966 companies have come to rely on our
customized Engineered Cooling Systems and
Enclosures to work in the toughest industrial and
severe environmental conditions.
Philip Doyle Manufacturing offers both standard
and customized operator cabins, control room
enclosures and industrial air conditioners.
Choose from our standard designs or select from
our list of optional features to customize our
product to your specific requirements.
Ian Murray
Operations Manager
6 – 820 – 28th St NE
CALGARY, Alberta
Canada, T2A 6K1
Tel: +1 (403) 569-9455
Fax: +1 (403) 569-9414
[email protected]
www.rotork.com
Joanne Swick
Admin. Mkgt. Asst
Bow Valley Square 1
CALGARY, Alberta
Canada, T2P 2R9
Tel: +1 (403) 269-5531
Fax: +1 (403) 266-3307
[email protected]
www.streamflo.com
Rotork Controls is the largest manufacturer
of industrial valve actuators in the world. Our
product range includes electric, pneumatic,
hydraulic and high-pressure gas multi-turn,
linear and part-turn actuators. We also
manufacture a range of digital control systems
and software. Rotork Controls (Canada) Ltd.
has extensive experience providing valve control
solutions to the oil, gas, water, wastewater,
power, chemical, pulp and paper and other
process industries across Canada.
Stream-Flo Industries Ltd., is a privately owned
and operated Canadian manufacturer of wellhead
equipment including SAG applications, manual
and actuated gate valves and check valves.
Stream-Flo’s check valve line includes subsea,
pipeline and facility applications with swing,
piston and wafer designs.
Manufacturing facilities are located in ed-monton,
Alberta and are accredited to ISO 9001 and API
6A and 6D.
Leela Hardat
185 rue Voyageur
CANADA H9R 6B2
Tel: 514-694-4110, ext 232
Fax: 514-694-2634
[email protected]
www.techmire.com
in the market today.
Techmire was founded in 1973, and is today the
world leader in the design and manufacture of
multiple-slide die-casting systems for precision
components in zinc, lead and magnesium alloys.
Headquartered in Montreal, Canada, Techmire
has full turnkey systems capability, including
design, manufacture and testing of die-casting
after-sales service. Refurbishing of Techmire diecasting systems and major components is also
undertaken. ISO 9001:2000 registered QMS
Scott Grills
General Manager
140 Iber Rd
STITTSVILLE, Ontario
Canada, K2S 1E9
[email protected]
www.induspac.com
Manufacture and distribute of customized
corrugated, wood, plastic, paper and foam
protective packaging design, and manufacturer
and distributor of packaging supplies and
inventory and logistic management systems
servicing Military, Aerospace, High-tech, Medical,
Automotive, Distribution and Government clients
in Canada, USA, Mexico China (and region)
and Europe. Induspac offers a large variety of
protective packaging products and services.
Induspac is Canada’s most vertically integrated
manufacturer of protective packaging .
16
17
CANADIANEXPORTS
CANADIANEXPORTS
DEFENSE
DEFENSE
CONTACT INFO:
Rob Muru
President
51 McCormack St
YORK, Ontario
Canada, M6N 1X8
Tel: +1 (416) 769-4557
Fax: +1 (416) 769-7975
[email protected]
www.a-linetool.com
Scintrex Trace Corporation
CONTACT INFO:
IDS (Intelligent Detection Systems Inc):
a publicly-traded, independent Canadian
company with operations in the USA, France,
Australia, UK and Brazil, and representatives
in over 50 countries--specializes in state-ofthe-art detection systems.
Guy Couture
IDS was founded in 1986 as CPAD
Technical Sales/Service V.P.
Holdings Inc. and, in 1998, acquired
Scintrex Limited creating a new fusion of
300 Parkdale Ave.
advanced technologies, products and skills.
OTTAWA, Ontario
IDS’ Analytical & Security Division
Canada, K1Y 1G2
is focused on the development and
Tel: +1(613) 224-1061
manufacture of explosives and drug
Fax: +1(613) 224-2603
trace detection systems. The Division is
developing the next generation of trace
[email protected]
chemical detection products aimed at
www.scintrextrace.com
reducing the threat of terrorism and the
blight of drug trafficking.
Nova Leather Limited
Fenix Tactical
CONTACT INFO:
Alex Palen
Vice President
57-6730 Falconer Dr.
Canada, L5N 1L5
Fenix Canada manufacture, sale and export
full line of professional and recreational
flashlights. Product line includes military/
tactical series, flashlights for outdoor
activities, emergency lights for car, boat,
house, cottage. We offer lifetime warranty,
competitive international shipping and
flexible payment plans.
Special programs for developing nations,
military, police, government agencies and
NGOs. Visit our website for information
Tel: +1 (416) 836-6240
Fax: +1 (905) 286-1643 about our latest products. Our flashlights
tested by international consumer and
[email protected] technical authorities and granted 5 star
www.fenixtactical.com
rating in all categories. Very powerful
(handheld - up to 550 lumens, search lights
- up to 5500 lumen), energy consuming
lights made under strict military specs will
never let you down. You can depend on our
lighting systems!
CONTACT INFO:
Vince Lemiex
General Manager
Nova Leather Limited is a Canadian
manufacturer of premium Leather products. We
have been crafting leather goods since 1978
and have grown from a small basement shop to
a full plant facility. Our products are currently
shipped from coast to coast in Canada and
selected markets in the United States.
P.O. Box 759 Stellarton
Industrial Park Stellarton,
Besides specializing in belts, law enforcement
Nova Scotia, Canada
products and custom made guitar straps, we
have a full 67 page craft catalogue available
Tel: +1 (902) 752-8000
Fax: +1 (902) 752-0758 filled with craft kits, tools, hardware, dyes,
leather and much more.
[email protected]
www.novaleather.com
Our general leather goods which include belts,
coin purses, rifle slings, wallets, key tags,
coasters, and much more, are offered through
various distributors and inquiries are welcome.
Our custom lines include knife cases, hockey glove
replacement palms, industrial cases and much more.
M.P.T. Inc.
CONTACT INFO:
Mike Pearson
Vice President
P.O. Box 788
DRESDEN, Ontario
Canada, N0P 1M0
Tel: +1 (519) 683-6122
Fax: +1 (519) 683-6028
[email protected]
www.mptinc.com
HRose Machining Limited
CONTACT INFO:
Jan Shiells
Controller
41 Bruce Cres
CARLENTON PLACE, Ontario
Canada, K7C 3T3
Quantum Scientific Inc.
Contretron Inc.
Quantum Scientific Inc. specializes in
the design and manufacture of custom
CONTACT INFO:
aluminum shipping case, transit case, and
rack mount case technologies for both
Gary Aitchison
commercial and military applications.
Corporate Standards
Impervious to high/low temperature
extremes, altitude, rain, sleet, snow, sand
5938 Ambler Dr.
and dust, all our aluminum shipping
case, transit case and rack mount case
Canada, L4W 2N3
technologies meet ATA (Air Transport
Association) 300, Category 1 specifications
Tel: +1 (905) 625-0770
Fax: +1 (905) 625-6886 and are easily transportable in both
commercial and military environments,
[email protected] regardless of geographical location.
www.cyber-case.com
Contretron Inc, formerly known as: Canadian
Counter Measures Electronics Inc. (CCME) has
been designing and manufacturing innovative
test equipment for the Telecommunications,
CONTACT INFO:
Utility and Security Industries since 1986. We
specialize in innovative R&D design, creating
Don Elliott
unique, cost effective solutions to today’s wire
President
and cable problems. We are also Electronic
Counter Surveillance specialist’s advising
6440 Notre-Dame St
government and law enforcement agencies
W MONTRÉAL, Québec
worldwide on cost-effective solutions to the
Canada, H4C 1V4
detection of illegal electronic eavesdropping
Tel: +1 (514) 933-5752
devices. As part of our Security Division,
Fax: +1 (514) 933-4128 we are Research Electronics Intl. (REI)
distributors for Canada. REI designs and
[email protected]
manufactures a unique line of electronic
www.cablelocators.com
security products that have become standard
tools for Government and Corporate security
departments around the world.
CCME is based in Montreal, Canada, and
exports worldwide.
M.P.T. Manufacturing Process Technologies Inc.
has been delivering quality custom automation
& control solutions since 1990. We are ISO
9001 certified. Our global customer base
includes leading automotive, die-casting, heavy
industrial, aerospace, plastics and consumer
products companies.
Tel: +1 (613) 257-5788
Fax: +1 (519) 257-8519
[email protected]
www.hrose.com
HRose Machining Ltd is a major supplier of
precision machined components and assemblies
to the High Tech, Industrial, Exploration and
Defence markets.
• Controlled Goods Registered and licensed to
manufacture and transport firearms.
• Over 25,000 sq ft of manufacturing space.
• Operating 24/7 with 31 modern CNC
machining centers.
• High Volume precision machining (tolerances
up to 0.0002”).
• Manufacture to your specifications.
RTI Research Ltd.
CONTACT INFO:
Kelly Jaremco
President
8440-206 St.
LANGLEY, British Columbia
Canada, V2Y 2B6
Tel: +1 (504) 888-7944
Fax: +1 (504) 999-6943
[email protected]
www.accupro.com
RTI Research Ltd. is one of North America’s
foremost developers of premier gun care
products for the shooting sports industry,
military, and law enforcement applications. RTI
manufactures ACCUPRO gun care products
under exacting standards of quality and
excellence. The product line is divided into three
main categories: 1) chemicals, 2) hardware and
3) accessories. These include: cleaning fluids;
rifle, shotgun and pistol cleaning rods; bore jags;
brushes and swabs; cotton patches; tactical gun
cases; shooting muffs; and ear plugs.
18
19
CANADIANEXPORTS
CANADIANEXPORTS
electrical & Electronics
DEFENSE
Leading Edge Automation Inc.
CONTACT INFO:
CONTACT INFO:
Eric Desouza
Office Manager
8-160 Matheson Blvd E
Canada, L4Z 1V4
Tel: +1 (905) 712-9451
Fax: +1 (905) 712-9460
[email protected]
www.leadingedgeautomation.com
Leading Edge Automation is a drives control
integration and industrial automation company
that provides state-of-the-art solutions to a wide
range of industries and demanding applications.
We are also a major authorized distributor for the
versatile Parker SSD Drives product line.
In addition to our strong engineering and
product offerings, we are able to provide
complete turnkey solutions to our customers.
Scott Grills
General Manager
140 Iber Rd
Canada, K2S 1E9
Tel: +1 (613) 742-6766
Fax: +1 (613) 836-2536
[email protected]
www.induspac.com
protective packaging products and services. With
four major divisions, Induspac is canada’s most
vertically integrated manufacturer of protective
packaging and services.
DLL Inc.
Fenix Tactical
CONTACT INFO:
CONTACT INFO:
Annie LeBlanc
Vice President
Tel: +1 (450) 346-7044
Fax: +1 (450) 346-0643
SYMCOD Inc.
CONTACT INFO:
Maryse Noline
VP, Sales
1171, rue Notre-Dame O.
VICTORIAVILLE, Québec
Canada, G6P 7L1
Tel: +1 (819) 751-0095
Fax: +1 (819) 751-1292
[email protected]
www.symcod.com
Alex Palen
Vice President
57-6730 Falconer Dr.
Canada, L5N 1L5
Tel: +1 (416) 836-6240
Fax: +1 (905) 286-1643
[email protected]
www.fenixtactical.com
Fenix Canada manufacture, sale and export
full line of professional and recreational
flashlights. Product line includes military/
tactical series, flashlights for outdoor
activities, emergency lights for car, boat,
house, cottage. We offer lifetime warranty,
competitive international shipping and
flexible payment plans.
Special programs for developing nations,
military, police, government agencies and
NGOs. Visit our website for information
about our latest products. Our flashlights
tested by international consumer and
technical authorities and granted 5 star
rating in all categories. Very powerful
(handheld - up to 550 lumens, search lights
- up to 5500 lumen), energy consuming
lights made under strict military specs will
never let you down. You can depend on our
lighting systems!
The Panel Shop
Since 1990, Symcod has specialized in the
development of data collection equipment.
The mission of the company is: To develop and
market innovative data collection equipment
in specialized fields through a network of value
added resellers in the software field.
Symcod is aware that a company’s data
collection is more than just a question of
installing cables. The hardware must be
appropriate, and installed with professionalism
on the network level as well as the ergonomic
level. It must be reliable, sturdy and affordable.
The application software and the hardware must
be transparent so the customer can work most
effectively and receive uninterrupted service.
The customer’s personnel must be well-trained
but a toll-free number is available for support.
For more than twelve years, this global vision
driven by the customer’s needs has brought
worldwide success to Symcod.
CONTACT INFO:
John McGraw
Owner
1925 Hanwell Rd.
Canada, E3C 1M4
Tel: +1 (506) 455-1925
Fax: +1 (506) 459-3400
The Panel Shop Inc. began operations
in 1995. It currently employs 10 people
including engineers, technicians, and
support staff. The shop is certified by
the Canadian Standards Association to
manufacture industrial control panels to
CSA C22.1#14 and UL 508A. Our panels
are therefore certified for use in Canada
and the United States.
The Panel Shop Inc.’s Quality Control System
is ISO 9001:2000 registered with QMI.
[email protected] company and staff, how to reach us and what you
www.thepanelshop.com think of our products, services and our website.
Learn about our company and how it started
in our profile. Let us know what you think of
our company, our products and services or
our website with our feedback form. We want
to know what you think.
20
21
CANADIANEXPORTS
CANADIANEXPORTS
AK Electromagnetic Inc.
Heinemann Electric Canada Ltd.
IE Power Inc.
CONTACT INFO:
CONTACT INFO:
CONTACT INFO:
A. Kumar
President
30 Lippée St;
LES CÔTEAUX, Québec;
Canada, J7X 1H5
Tel: +1 (514) 620-3717
Fax: +1 ((450) 267-1144
AK ELECTROMAGNETIQUE, Inc. is a small
business corporation chartered in Canada.
AK Electromagnetique specializes in the
development and manufacturing of microwave
oven radiation checker, radiation hazard
meters at L-band (MSAT/INMARSAT band)
and UHF (800-900 MHz band), fixed and
mobile antennas for mobile satellite (MSAT
and INMARSAT) services.
We take pride in delivering our customers
[email protected] more than just a high quality product. We
www.canadianexports.org/ also provide service - specialized attention
akelectromagnetic
to individual requirements. Customer
contentment is the prime concern of the
company. With emphasis on “design for
production“ AK Electromagnetique works
closely with its customers and is engaged
in joint efforts combining resources and
technical expertise, making high performance/
cost effective a reality for commercial industry.
Centennial Solar
Centennial Solar is a Canadian-based
company evolving in the photovoltaic
industry. As an eco-friendly company, our
CONTACT INFO:
goal is to promote the use of renewable
energy sources; more precisely we are
Gordon Terlier
V.P. Global Sales & Mktg. committed to solar-powered systems.
Benefiting from already available
8114B Trans-Canada Hwy components from across the globe, our
SAINT-LAURENT, Quebec
company is positioned as an integrator for
Canada, H4S 1M5
the design of low-cost energy solutions.
Using best-of-breed components from
Tel: +1 (450) 424-7532
Fax: +1 (514) 461-9824 across the world (Germany, Italy, USA,
Canada, etc), we manufacture solar panels
[email protected] that are amongst the most efficient on the
www.centennialsolar.com marketplace today.
Our manufacturing plant can produce solar
panels in the range of as little as 5 watts,
up to 250 watts.
Mercedes Hermenegildo
Cust. Serv. Man.
343, rue Deslauriers
Canada, H4N 1W2
Tel: +1 (514) 332-1163
Fax: +1 (514) 332-5751
[email protected]
www.heinemann-electric.com
Heinemann’s Engineering capability stems from
hundreds of man years experience assembling
and customizing Heinemann Circuit Breakers in
applications such as: Naval Vessels, Computer
Systems, Electric Locomotives, Passenger Rail
Cars, & Electric Automobiles. Combining our
engineering experience, our CAD equipment and
our production equipment we are able to offer fast
turnaround of customized Control Panels.
Our engineers enjoy your premium space
challenges. We relish the opportunity to design and
build Control Panels that fit into small spaces.
Cam Tran Co. Ltd.
CONTACT INFO:
Terry Irwin
Manager
P.O. Box 866
COLBORNE, Ontario
Canada, K0K 1S0
Tel: +1 (905) 355-3224
Fax: +1 (905) 355-2273
[email protected]
www.camtran.com
Vince Scaini
Sales & Marketing
1-4170 Sladeview Cres
Canada, L5L 0A1
Tel: +1 (905) 813-8900
Fax: +1 (905) 813-8822
[email protected]
www.iepower.com
Centenial Solar
IE POWER INC. dedicates its resources to the
development, engineering, sales, manufacture,
and testing of standard or custom designed solid
state power conversion products. Designs are
state-of-the-art utilizing the latest technology.
Applications range from industrial to military
and from nuclear power generating stations to
telecommunications systems. Products include
uninterruptible power systems (UPS), DC to AC
inverters, frequency converters, battery chargers,
AC-DC power rectifiers, resonant converters,
degaussing rectifiers, and power supplies.
CONTACT INFO:
Barry Rolbin
Director
410-160 Saint-Viateur St E
MONTRÉAL, Quebec
Canada, H2T 1A8
Tel: +1 (514) 490-1060
Fax: +1 (514) 490-1360
Gordon Terlier
V.P. Global Sales & Mktg.
8114B Trans-Canada Hwy
Canada, H4S 1M5
Tel: +1 (450) 424-7532
Fax: +1 (514) 461-9824
[email protected]
www.centennialsolar.com
Centennial Solar is a Canadian-based company
evolving in the photovoltaic industry. As an ecofriendly company, our goal is to promote the use
of renewable energy sources; more precisely we
are committed to solar-powered systems.
Benefiting from already available components
from across the globe, our company is positioned
as an integrator for the design of low-cost energy
solutions. Using best-of-breed components from
across the world (Germany, Italy, USA, Canada,
etc), we manufacture solar panels that are
amongst the most efficient on the marketplace
today.Our manufacturing plant can produce solar
panels in the range of 5 watts, up to 250 watts.
KES International Ltd.
Corgo Industires
Continuous growth has inspired six expansions
to our Colborne facility, the most recent in
1999. Cam Tran Pacific was opened in May
1997 in Chilliwack, BC. The company moved
to an expanded facility in April 2003, with
48000 sq. ft. of manufacturing space and 3
acres of outdoor storage. The Campbell family
of companies opened Cambro Lasertek (metal
fabrication plant) in September 2001 to ensure
continuous supply of transformer tanks at
competitive prices. Cam Tran continues to invest
in State of the Art, computer, production and
test equipment.
CONTACT INFO:
Thank you for allowing us the opportunity to
present our comprehensive product line to
you. Corgo Industries has been supplying the
telecommunication, cable and electric fields for
over ten years.
Our products are made of top quality materials,
made to the specifications and subject to the
inspection of our qualified customers.
CONTACT INFO:
Miomir Kotlica
Manager
1500-5650 Yonge St
NORTH YORK, Ontario
Canada, M2M 4G3
Tel: +1 (905) 707-7762
Fax: +1 (905) 707-0846
Partial Discharge test equipment for High
Voltage insulation in power generators and
motors on-line (during regular operation).
PD instruments - Potable for occasional testing
and Stationary Continuous Monitoring system for
24 hours surveillance of the rotating machine.
Various PD (Partial Discharge sensors), cable
type, epoxy resin type, insulator type, variable
capacitance sensors.
[email protected]
www.corgoind.com
[email protected]
www.kesengineering.com
Taylor Electronic Designs
Vidir Machine Inc.
CONTACT INFO:
CONTACT INFO:
Vidir Machine Inc., located in central Manitoba
Canada, has grown to become a leading supplier
David Mills
of both motorized and non-motorized storage and
National Accounts Mgr.
display systems. We have been selected as the
US Sales Office
equipment supplier for major retailers throughout
179 US Hwy. 27 North, Suite G. the world and pride ourselves in our ability to
Clermont – Florida, USA, 34711
resolve storage concerns of our customers.
CONTACT INFO:
Toll Free: 1-866-898-4347
Fax: +1 (352) 243-7320
Tel: +1 (613) 742-6766
Fax: +1 (613) 836-2536
Roy Taylor
President
305-477 Richmond Str. W,
Toronto – On
Canada, M5V 3E7
Taylor Electronic Designs established in 1970)
provides high quality electronic Manufacturing
services for a variety of industries.
Taylor Electronic Designs also provides test
instruments, controls, automation and various
other products under the Taylor name.
Tel: +1 (416) 504-9699
Fax: +1 (416) 504-9699
Electronic Manufacturing Services: PCB
Layout and Design, Electronic Assembly, Test,
[email protected]
www.taylorelectronicdesigns.com Prototypes, Troubleshooting.
Software Programming: Embedded Systems,
Microprocessors, PC (Personal Computer)
[email protected]
www.vidir.com
in the market today.
Scott Grills
General Manager
140 Iber Rd
Canada, K2S 1E9
[email protected]
www.induspac.com
protective packaging products and services.
Induspac is Canada’s most vertically integrated
manufacturer of protective packaging.
22
23
CANADIANEXPORTS
CANADIANEXPORTS
ENERGY
Centennial Solar
Centennial Solar is a Canadian-based
company evolving in the photovoltaic
industry. As an eco-friendly company, our
CONTACT INFO:
goal is to promote the use of renewable
energy sources; more precisely we are
Gordon Terlier
V.P. Global Sales & Mktg. committed to solar-powered systems.
Benefiting from already available
8114B Trans-Canada Hwy components from across the globe, our
company is positioned as an integrator for
Canada, H4S 1M5
the design of low-cost energy solutions.
Using best-of-breed components from
Tel: +1 (450) 424-7532
Fax: +1 (514) 461-9824 across the world (Germany, Italy, USA,
Canada, etc), we manufacture solar panels
[email protected] that are amongst the most efficient on the
www.centennialsolar.com marketplace today.
Our manufacturing plant can produce solar
panels in the range of as little as 5 watts,
up to 250 watts.
ENVIRONMENTAL
CONTACT INFO:
CEO, Owner
Welcome to the website of The RoadPacker
Group - one of the world’s fastest growing
soil stabilization companies. We specialize
in environmentally safe, water soluble
chemicals for soil stabilization, soil
compaction, dust suppression and other soil
stabilizing related products.
105-150 Crowfoot Cres NW,
How we started: In 1990, RoadPacker began
Suite 209 CALGARY,
Alberta Canada, T3G 3T2 initial market research in Australia into
the field of chemical soil stabilization. The
Tel: +1 (403) 201-7444
research identified a market for this type
Fax: +1 (403) 770-8375 of product, within a road construction and
maintenance industry that was spending
[email protected]
billions of dollars each year. At local, as well
www.roadpacker-group.com
as national levels - many administrations/
governments were spending as much as 50%
of their entire budget on roads. Aided by the
advances in chemical technology during the
last 30 years, ongoing research led to the
development of a new chemical soil stabilizer
called RoadPacker Plus.
FURNITURE
Food / Food Processing
Lockwood Manufacturing Inc.
CONTACT INFO:
Carol Murray
Inside Sales
Marketing Manager
84 Easton Rd.
BRANTFORD, Ontario
Canada, N3P 1J5
Tel: +1 (519) 756-2800
Fax: +1 (519) 756-1541
[email protected]
www.lockwoodmfg.ca
Since 1958, it has been Lockwood’s mission
to Manufacture Premium Quality Professional
Bakeware, with our Sheet Pans, Bakery Racks,
and Non-Stick Coatings.
Lockwood inventories an extensive range of
professional bakeware, including bakery racks
available for immediate delivery to service
supermarkets, foodservice, retail, and wholesale
bakeries. Our full line of bakeware includes
the most popular sizes of Bun/Sheet Pans,
Perforated/Display Trays, and Knock-Down Bakery
Racks. Single or Strapped, Bread/Loaf Pans,
Baguette/French Loaf Pans and hamburger or Hot
Dog roll pans. With the large variety of Muffin and
Cake Pans in different styles and sizes, we are
able to meet almost any requirement. Including
the standard size Muffin Pan with varying mould
configurations, crown top Muffin Pans, oversized
moulds, unique square and rectangular mould
pans and our Mini Muffin Pans.
Unifiller Systems Inc.
The world leader in the manufacture of
depositors and cake automation for the bakery
and food service industries.
CONTACT INFO:
We, at UNIFILLER, are a dedicated team of
professionals who have the knowledge and
expertise of the Baking and Food Production
Industry. The owners are highly creative
7621 MacDonald Rd. DELTA, entrepreneurs who are committed to developing
British Columbia Canada,
new technologies through unique and innovative
V4G 1N3
machine designs. UNIFILLER provide solutions
for precise portion control in the food industry
Tel: +1 (604) 940-2233
Fax: +1 (604) 677-5844 with an extensive range of single piston
depositors, transfer pumps and multiple head
[email protected]
units, and we specialize in producing both fully
www.unifiller.com
and semi automated cake production systems.
Mark Soares
General Manager
Our philosophy is to develop strong long term
relationships with our customers through
honesty, integrity and trust. We sell through
expertise and commit to understand our
customer’s needs to create a “win - win”
situation for everyone.
Larsen & Shaw
CONTACT INFO:
Steve Caslick
P.O. Box 1420
WALKERTON, Ontario
Canada, N0G 2V0
Tel: +1 (519) 881-1320
Fax: +1 (519) 881-3593
[email protected]
www.larsenhinge.com
A leading manufacturer of top quality custom
and standard continuous hinges, butt hinges and
furniture hardware in various materials since 1919.
We are The Hinge People®. We produce quality
hinge solutions by providing customers responsive,
reliable on-time delivery at a competitive price.
Larsen & Shaw, a family owned and operated
business, was established in 1919, primarily
serving the hardware needs of the furniture
industry. Today, as a leading manufacturer of
continuous & butt hinges and hardware metal
stampings, we build on the solid reputation
provided by our history of tooling and
production innovations.
We currently produce products for: Toolboxes, Electrical
boxes, Appliances, Boats, Emergency vehicles, Truck
bodies, Washroom equipment, Lockers, Furniture,
Automobiles & buses, a multitude of OEM and
Distribution Industries, and much more…..in short,
Larsen & Shaw products are everywhere!
24
25
CANADIANEXPORTS
CANADIANEXPORTS
Health, Beauty, & Fashion
Health, Beauty, & Fashion
CONTACT INFO:
Vince Lemiex
General Manager
Nova Scotia, Canada
Tel: +1 (902) 752-8000
[email protected]
www.novaleather.com
Therapure Biopharma Inc.
CONTACT INFO:
Dirk Alkema
V.P. Operations
Therapure Biopharma Inc. is a Canadian
biopharmaceutical company committed
to the development, manufacture,
purification, and packaging of high-quality
biological therapeutics.
We provide our clients and partners with
customized solutions for the development
and manufacture of complex biological
2585 Meadeonpine Blvd.
Mississauga, ON, CANADA products, leveraging our flexible, modern
cGMP manufacturing facility, our extensive
Canada, L5N 8H9
quality systems and the dedication of our
Tel: +1 (905) 286-6200
highly experienced staff.
Fax: +1 (905) 286-6300
[email protected]
www.therapurebio.com
Naturosources
CONTACT INFO:
Youssef Atana
Owner
2447, rue des Cyprès
SHERBROOKE, Quebec
Canada, J1G 4G4
Tel: +1 (819) 820-9773
Fax: +1 (819) 820-9773
[email protected]
www.naturosources.com
Naturosources is a Canadian business
specialized in the production and the
commercialization of 100% natural aromatic
ingredients.
Our line of products include:
- Aromatic and medicinal plants.
- High quality Essential oils 100% pure and
natural obtained by steam distillation. Our
Essential oils and botanically and biochemically
well defined. (Checked by our laboratory partner)
- 100% natural floral water ( hydrolats):
Lavender, Oregano, Rosemary, Orange flower,
Rose damasca …
Canadex Laboratories Inc.
Biovectra dcl
CONTACT INFO:
CONTACT INFO:
Fayez Chehab
President
Canada, H4L 5B9
Tel: +1 (514) 747-2493
Fax: +1 (514) 747-7550
[email protected]
www.canadexlabs.com
Yes Biotech Laboratories Ltd.
Vista Medical Ltd.
CONTACT INFO:
CONTACT INFO:
Jun Choo
Sales & Marketing
23-2355 Derry Rd. E.
Canada, L5S1V6
Tel: +1 (905) 677-9221
Fax: +1 (905) 677-0023
ANOGEN is a trade name of Yes Biotech
Laboratories Ltd., a Canadian-based company
located near Toronto, Ontario. Anogen has been
producing products for research applications since
its incorporation in 1989, and specializes in the
research and development of biopharmaceutical
and immunodiagnostic products based on
monoclonal antibody technology.
Director, Bus. Dev
3-55 Henlow Bay
WINIPEG, Manitoba
Canada, R3Y 1G4
Tel: +1 (204) 949-7652
Fax: +1 (204) 949-7653
Canadex Laboratories specializes in research
and development, custom formulations, and
state of the art manufacturing. For over 25
years, Canadex has been a leading manufacturer
with extensive product lines of pharmaceutical
grade health care products including all-natural
vitamins, minerals, botanicals, and high-quality
health supplements. Canadex is committed
to developing the finest products available
using only the best raw materials and cuttingedge technology. Canadex Laboratories is well
positioned in the health and wellness market,
with an in-house FDA registered pharmaceutical
manufacturing facility.
Vista Medical Limited is a world leader in
pressure sensing technology.
Established in 1989 and a pioneer in the field of
pressure mapping, Vista Medical distributes its
FSA (Flexible Sensing Applications) product
lineup around the world.
[email protected]
www.yesbiontech.com
Corporation Scientifique Claisse
Bastien Industries
CONTACT INFO:
CONTACT INFO:
Robert Verville
General Manager
Parc Technologique du Qc
Métropolitain
350, rue Franquet,Suite 45
QUÉBEC, Québec, G1P 4P3
Tel: +1 (418) 656-6453
Fax: +1 (418) 656-1169
[email protected]
www.claisse.com
11 Aviation Ave,
St. Charlottetown- PEI,
Canada, CIE 2A6
Tel: +1 (902) 566-9116
Fax: +1 (902) 628-2045
[email protected]
www.biovectra.com
MedTech Wristbands
Applications for Vista Medical’s FSA product
[email protected]
lineup include wheelchair seating, medical and
www.vista-medical.org
retail bed, orthotics, prosthetics and equine.
World leader and the first in its field in the
development of analytical fusion techniques,
instrumentation and fine chemistry science,
Claisse isWorld-renowned for its outstanding
achievements in the development of inorganic
sample preparation by fusion for XRF, AA, ICP
and wet chemistry analysis. Our main customers
are cement plants, mining companies and lime,
bauxite, aluminum, ferroalloys, steel, pure
metals, catalysts, polymers, ceramics, glass,
petroleum and oil companies. We also serve
universities and laboratories that are involved
with geology and mineral prospecting.
Krystine
Acct & Cust. Serv.
We are an Eastern Canadian pharmaceutical/
biologic manufacturer with over 35 years of
experience serving a global customer base.
BioVectra provides small to large scale custom
manufacturing of advanced intermediates, active
pharmaceutical ingredients and biologics along
with a complement of core products targeted
toward bioprocessing.
Quebec city at Village Huron (Wendake). Our
Ginette Bastien
company is famous for the excellence of his
Owner
moccasins, snowshoes and Indian novelties.
Maurice Bastien, former Grand Chief of
WENDAKE, Québec
Huron-Wendat tribe, was an expert in the
Canada, G0A 4V0
production of snowshoes, to which he confined
his manufacturing operations until he started
Tel: +1 (418) 842-1330
the manufacture of moccasins. The popular
Fax: +1 (418) 842-1330
HIAWATHA brand of hand beaded moccasins,
which bear the skilful needlecraft of the majority
[email protected]
of the women of Wendake village, are distributed
CONTACT INFO:
Shaheda Banu
Marketing Coordinator
1015 Green Valley Rd
LONDON, Ontario
Canada, N6N 1E4
Tel: +1 (519) 686-0028
Fax: +1 (519) 686-9369
[email protected]
www.medtechgroup.com
MedTech Wristbands is a world-leading supplier
of North America made wristband products. Our
wristbands, used for identification and marketing
in recreational markets, are put into use for
special events access, for group identification
and at sales promotions. We supply thousands of
customers with our products, as well as resellers
in over 100 countries globally, all at wholesale
prices. more...
Our extensive wristband selection, value prices,
rapid turnaround time, customization services
and customer service are certain to impress you.
26
27
CANADIANEXPORTS
CANADIANEXPORTS
Cam Tran Co. Ltd.
CONTACT INFO:
Terry Irwin
Manager
P.O. Box 866
COLBORNE, Ontario
Canada, K0K 1S0
Tel: +1 (905) 355-3224
Fax: +1 (905) 355-2273
[email protected]
www.camtran.com
Continuous growth has inspired six
expansions to our Colborne facility, the
most recent in 1999. Cam Tran Pacific
was opened in May 1997 in Chilliwack,
BC. The company moved to an expanded
facility in April 2003, with 48000 sq. ft.
of manufacturing space and 3 acres of
outdoor storage.
The Campbell family of companies opened
Cambro Lasertek (metal fabrication plant)
in September 2001 to ensure continuous
supply of transformer tanks at competitive
prices. Cam Tran continues to invest in State
of the Art, computer, production and test
equipment. Experienced personnel combined
with on going training and education
programs have been essential components of
our company growth and improvement.
Halltech Inc.
CONTACT INFO:
Bruce Bradley
Polymer Sales Manager
Prag Khatri
Adhesive Sales Manager
465 Coronation Dr.
M1E 2K2
Tel: +1 (416) 284-6111
Fax: +1 (416) 284-6932
[email protected]
Commitment to quality in all areas,
evidenced by our ISO 9001 registration
CONTACT INFO:
and our continuous upgrading of
equipment and manufacturing methods,
Chris Wyatt
keeps us one of the best facilities of
our kind in North America. Our other
manufacturing standards include ASME U,
P.O. Box 339
S, and H stamps, National Board R stamp,
STRATFORD, Ontario
B31 for piping, TSSA and CSA B51.
Canada, N5A 6T3
Our design and fabricating experience
led to us being the major supplier of
Tel: +1 (519) 271-4751
Fax: +1 (519) 271-1092 pressure vessels to the Hibernia Offshore
Oil Project. We supplied major vessels to
[email protected]
the Sable Offshore Energy Project and
www.clemmersteelcraft.com
presently are suppliers to the Suncor Oil
Sands project. Regular customers include
Bayer, Morton International, Uniroyal, and
Nova Chemical.
Fabspec Inc.
polymer emulsions and industrial
adhesives, and a supplier of natural gums and
starches with facilities in Ontario and Quebec,
where our division Polycol ensure the needs of our
Quebec customers are met.
products are at home in a wide range of industrial
environments. Some of the industries for which
we manufacture industrial adhesives or polymer
emulsion products are: textile finishing, coatings,
sporting goods, woodworking, automotive, paint,
paper products, filter tipping, insulation, labeling,
fire retardants, PU foam, rubber solutions,
resin solutions, duct liners, tapes, laminating,
tube winding, print bonding, spray bonding,
construction, packaging, footwear, and other
industries that use either wood glues, contact
cements, hot melt products or others.
Hollbrit Inc.
CONTACT INFO:
Glyn Williams
Owner
WHITBY, Ontario
Canada, L1N 5Z9
Tel: +1 (905) 665-8812
Fax: +1 (905) 665-8815
Ebby A. Basirat
Director, Sales & Mktg.
160 rue du Roi, C.P. 130
SOREL-TRACY, Quebec
Canada, J3P 5N6
Tel: +1 (450) 742-0451
Fax: +1 (450) 742-9568
[email protected]
www.fabspec.ca
SYMCOD Inc.
CONTACT INFO:
Located in Sorel-Tracy, Quebec, Canada,
in the heart of an established industrial
region, Fabspec Inc. has been serving the
needs of local and international industry
since 1974. We offer services of complex
mechanical fabrication, welding, large
dimension machining, heat treatment,
sanding and painting.
Our company has extensive experience in
the fabrication of pressure vessels of all
types and sizes. Fabspec Inc. is staffed
with a dedicated team of engineers,
technicians and various specialized trades,
all committed to customer service and the
attainment of renowned quality.
CONTACT INFO:
Mike Pearson
President
P.O. Box 788
DRESDEN, Ontario
Canada, N0P 1M0
Tel: (519) 683-6122
Fax: (519) 683-6028
[email protected]
www.mptinc.com
[email protected] and Grinding (For large panels and boxes),
www.hollbrit.com
Fabspec Inc. is one of North America’s
most progressive and dynamic fabricators of
specialized equipment for heavy industry.
CONTACT INFO:
M.P.T. Inc.
Maryse Noline
VP, Sales
Canada, G6P 7L1
Tel: +1 (819) 751-0095
Fax: +1 (819) 751-1292
[email protected]
www.symcod.com
M.P.T. Manufacturing Process Technologies
Inc. has been delivering quality custom
automation & control solutions since 1990.
We are ISO 9001 certified. Our global
customer base includes leading automotive,
die-casting, heavy industrial, aerospace,
plastics and consumer products companies.
Our goal is to provide you with a solid
technology foundation to support operations
excellence and profitable growth.
M.P.T. Inc. offers a full range of design,
engineering and build services under
one roof. Our robust custom solutions
are backed by the industry leading 3
year M.P.T. warranty. We can meet all
your custom automation requirements
including material handling; process
and assembly cells, robotic integration,
nut runner tool integration, SCADA, test
measurement & inspection and custom
industrial controls & software.
Bohne Spring Industries Ltd.
CONTACT INFO:
Chris Wharin
Director
60 Coronet R
Toronto, Ontario
Canada, M8Z 2M1
Tel: +1 (416) 231-9000
Fax: +1 (416) 231-5365
[email protected]
www.bohnespring.ca
Bohne Spring is a custom spring maker
with a state of the art manufacturing
facility in Toronto, Ontario. Our team of
dedicated employees allow us to meet the
high standards our customers demand.
Our spring manufacturing capabilities
include: compression, extension, torsion,
wire forming, four-slide, small stamping and
light assembly. We are experts in custom
spring manufacturing from prototypes to
large production runs. At Bohne Spring we
offer exceptional quality, on time delivery
and a long tradition of spring design
manufacturing excellence. Our mission is
to be the leading manufacturer of quality
precision springs, wire forms and metal
stampings. Having established a solid
reputation through continuous improvement,
effective cost management and expansion
of business opportunities, we strive to
earn a reasonable return on investment
thereby assuring long term security for our
customers and employees.
28
29
CANADIANEXPORTS
CANADIANEXPORTS
Machines / Machinery / Equipment
Machines / Machinery / Equipment
Apex Precision Inc.
Commitment to quality in all areas,
evidenced by our ISO 9001 registration
and our continuous upgrading of
CONTACT INFO:
equipment and manufacturing methods,
Chris Wyatt
keeps us one of the best facilities of
our kind in North America. Our other
manufacturing standards include ASME U,
P.O. Box 339
S, and H stamps, National Board R stamp,
STRATFORD, Ontario
B31 for piping, TSSA and CSA B51.
Canada, N5A 6T3
Our design and fabricating experience
led to us being the major supplier of
Tel: +1 (519) 271-4751
Fax: +1 (519) 271-1092 pressure vessels to the Hibernia Offshore
Oil Project. We supplied major vessels to
[email protected]
the Sable Offshore Energy Project and
www.clemmersteelcraft.com
presently are suppliers to the Suncor Oil
Sands project. Regular customers include
Bayer, Morton International, Uniroyal, and
Nova Chemical.
Apex Precision Inc. has earned a strong
reputation for manufacturing complex,
high tolerance machined components.
Engineers, purchasers and project
CONTACT INFO:
managers appreciate our consistent quality,
competitive pricing, and respect for
Wayne Bishop
delivery schedules. We would welcome the
President
opportunity to demonstrate our knowledge,
872 de la Cité-des-Jeunes Rte experience and capabilities on your parts
SAINT-LAZARE, Québec
requirements. We are the right source if
Canada, J7T 2B5
you need R&D prototypes, short production
runs, aerospace tolerances and tractPlease
Tel: +1 (450) 510-5556
visit our Website for more information
Fax: +1 (450) 510-5557
on our company and our capabilities,
or contact us directly. You may use our
[email protected]
Request for Quote service to get a prompt
www.apexprecision.ca
and professional quotation on a current
parts requirement.
KN Equipment Inc.
Hydra Dyne Technology Inc.
CONTACT INFO:
Bob Nieminen
President
Since its creation in 1989, KN Equipment
Inc. specializes in the sale of new
and used equipment and spare parts
for the mining industries. Due to our
extended business and mines contacts,
we are able to easily find any type of
equipment (pumps, fans and ventilation
systems, booms and rock breakers, mills
equipments, mobile equipments and
more) no matter the application.
3429 Chemin du Vieux
Pont MCWATTERS, Quebec We gladly accept all information requests
Canada, J9X 5B7
for any type of application, within Canada
or for export.
Tel: +1 (819) 797-4919
Fax: +1 (819) 797-4924
Main products: new & used mining
[email protected] www.kninc.ca equipment: Crushers, portable mills, ball
mills, mobile equipment, locomotives,
pumps, etc.
Hydra Dyne Technology is a company that
designs and manufactures rotary unions,
cylinders and manifolds for some of the
most demanding markets in the world. With
combined experience over three decades, we
are your best resource.
CONTACT INFO:
Steve Bohner
President
55 Samnah Crescent
Ingersoll, Ontario
Canada, N5C 3J7
We are dedicated to the improvement of all
hydraulic components and would like to assist
you in the design and manufacturing of your
product. With our cost effective, innovative,
quality ideas geared to your specific
application, we can improve your product.
Whether it is a standard rotary union design
to improve hose routing or a new prototype
Toll Free: (800) 463-2331 design for a specific application, Hydra Dyne
Phone: (519) 485-2200
has the capacity to build one or whatever the
Fax: (519)485-0255
production quota requested. From concept
[email protected] to production, Hydra Dyne is the company
www.hydradynetechnology.com that has proven itself in more demanding
applications where liability is key to our
customer’s satisfaction.
Vidir Machine Inc.
CONTACT INFO:
David Mills
National Accounts Manager
US Sales Office
Vidir Machine Inc., located in central
Manitoba Canada, has grown to become
a leading supplier of both motorized
and non-motorized storage and display
systems. We have been selected as the
equipment supplier for major retailers
throughout the world and pride ourselves
in our ability to resolve storage concerns
of our customers.
179 US Hwy. 27 North, Suite G.
Clermont – Florida
USA, 34711
Multi-Power Products Ltd.
CONTACT INFO:
Noel McAuley
975 Crowley Ave.
KELOWNA – BC,
Canada, V1Y 9R6
Multi-Power Products Ltd. is one of
Canada’s most versatile manufacturers of
earth drilling rigs and ancillary equipment,
with a present product offering ranging
from their multi-purpose Pioneer class up
to their largest reverse circulation Explorer.
While primarily catering to the Mineral
Exploration market with their diamond core
and reverse circulation ( RC ) drill rigs,
Multi-Power also provides drilling systems
and components into the Construction,
Deep Foundation, Geothermal,
Geotechnical, Geophysical / Seismic, Water
Well, and Open Pit drilling markets.
in the market today. All our products are
Toll Free: 1-866-898-4347 engineered to ensure minimal maintenance.
Tel: +1 (352) 243-7310
Fax: +1 (352) 243-7320
We specialize in storage systems for spooled
products such as wire, cable and hose; rolled
[email protected]
products such as carpet, vinyl, flooring, fabric
www.vidir.com
and papers. More recently we have expanded
our market to include storage solutions for
tires, shelving and pan requirements.
Tel: +1 (250) 860-6969
Fax: +1 (250) 860-3340
Hazeland Mfg. Inc.
CONTACT INFO:
Joanne Swick
Admin. Mkgt. Asst
Bow Valley Square 1
CALGARY, Alberta
Canada, T2P 2R9
Tel: +1 (403) 269-5531
Fax: +1 (403) 266-3307
[email protected]
www.streamflo.com
Stream-Flo Industries Ltd., is a
privately owned and operated Canadian
manufacturer of wellhead equipment
including SAG D applications, manual and
actuated gate valves and check valves.
Stream-Flo’s check valve line includes
subsea, pipeline and facility applications
with swing, piston and wafer designs.
Manufacturing facilities are located in
Edmonton, Alberta and are accredited to
ISO 9001 and API 6A and 6D.
Since our inception in 1962, we have
become a leader in the oil and gas sector
due to our commitment to providing top
quality products and innovative designs.
Stream-Flo has two subsidiary companies:
Master Flo Valve Inc. produces specialty
control valves, production chokes and pig
ball valves worldwide; ERC Industries is
the equipment renewal division.
[email protected]
www.multipowerproducts.com
Multi-power is constantly expanding their
product range of drilling equipment /
components, and are willing to design
custom units to meet specific client needs.
CONTACT INFO:
Ben Bouwman
President
P.O. Box 722 10 Highlander St
ST GEORGE BRANT, On;
N0E 1N0
Tel: +1 (519) 448-1190
Fax: +1 (519) 448-1199
[email protected]
www.hazeland.com
About us:
Hazeland Manufacturing Inc. is an
independently owned and operated family
business. We are the manufacturers of
the Hydro-Spade. We believe that our
commitment to quality in both design
and manufacturing will make us easily
recognizable as leaders in vacuum
excavation equipment.
Custom Fabricating :
In addition to offering the Hydro-Spade
products, Hazeland Manufacturing Inc.
also does custom fabricating. Our years
of experience working for and with local
utilities in Southern Ontario has given us
a clear understanding of the needs in the
utilities market.
30
31
CANADIANEXPORTS
CANADIANEXPORTS
machines
Fabspec Inc.
MARINE
Cantrawl Nets Ltd.
Fabspec Inc. is one of North America’s
most progressive and dynamic fabricators of
specialized equipment for heavy industry.
CONTACT INFO:
Ebby A. Basirat
Director, Sales & Mktg.
160 rue du Roi, C.P. 130
SOREL-TRACY, Quebec
Canada, J3P 5N6
Tel: +1 (450) 742-0451
Fax: +1 (450) 742-9568
[email protected]
www.fabspec.ca
Located in Sorel-Tracy, Quebec, Canada,
in the heart of an established industrial
region, Fabspec Inc. has been serving the
needs of local and international industry
since 1974. We offer services of complex
mechanical fabrication, welding, large
dimension machining, heat treatment,
sanding and painting.
Our company has extensive experience in
the fabrication of pressure vessels of all
types and sizes. Fabspec Inc. is staffed
with a dedicated team of engineers,
technicians and various specialized trades,
all committed to customer service and the
attainment of renowned quality.
Unifiller Systems Inc.
The world leader in the manufacture of
depositors and cake automation for the bakery
and food service industries.
CONTACT INFO:
We, at UNIFILLER, are a dedicated team of
professionals who have the knowledge and
expertise of the Baking and Food Production
Industry. The owners are highly creative
7621 MacDonald Rd. DELTA, entrepreneurs who are committed to developing
British Columbia Canada,
new technologies through unique and innovative
V4G 1N3
machine designs. UNIFILLER provide solutions
for precise portion control in the food industry
Tel: +1 (604) 940-2233
Fax: +1 (604) 677-5844 with an extensive range of single piston
depositors, transfer pumps and multiple head
[email protected]
units, and we specialize in producing both fully
www.unifiller.com
and semi automated cake production systems.
Mark Soares
General Manager
Our philosophy is to develop strong long term
relationships with our customers through
honesty, integrity and trust. We sell through
expertise and commit to understand our
customer’s needs to create a “win - win”
situation for everyone.
CONTACT INFO:
Robert McIlwaine
President
140-6660 Graybar Rd
RICHMOND, British Columbia
Canada, V6W 1H9
Tel: +1 (604) 270-6387
Fax: +1 (604) 270-2527
[email protected]
www.cantrawl.com
Located in Richmond, British Columbia,
Cantrawl has been in business since 1988
and has gained an excellent reputation
for manufacturing high quality deep sea
trawls, research trawls and industrial and
marine safety nets. Our net makers also
have extensive experience in the design
and manufacture of a broad range of sports
nets including golf nets, driving range nets,
divider nets, and crowd control nets.
Cantrawl Nets Ltd. has been in business
since 1988 and has gained an excellent
reputation for manufacturing high
quality deep sea fishing nets, research
nets and industrial and marine safety
nets. Our net makers have extensive
experience in the manufacture of a
broad range of nets including golf
driving range and other sports nets.
Medical / lab / scientific
Caledon Laboratories Ltd.
CONTACT INFO:
David Brock
Sales Manager
40 Armstrong Ave.
GEORGETOWN, Ontario
Canada, L7G 4R9
Tel: +1 (905) 877-0101
Fax: +1 (905) 877-6666
[email protected]
www.caledonlabs.com
Caledon is an independent Canadian
company with over three decades of
experience in the purification and
packaging of High Purity Solvents and
Laboratory Chemicals. Our headquarters
and manufacturing plant is located near
the scenic Caledon Hills of Southern
Ontario. Caledon’s skilled and dedicated
team is devoted to providing outstanding
personal service, quality products and
quick delivery from our warehouses in
Alberta and Ontario. We believe that
you will easily find the information you
need. You can search for items, view
specifications, order online, or just pick
up the phone and call us. Our pledge is
that you will always receive the quality and
service that you expect.
Candex Laboratories Inc.
CONTACT INFO:
Fayez Chehab
President
Canada, H4L 5B9
Tel: +1 (514) 747-2493
Fax: +1 (514) 747-7550
[email protected]
www.canadexlabs.com
Canadex Laboratories specializes in
research and development, custom
formulations, and state of the art
manufacturing. For over 25 years, Canadex
has been a leading manufacturer with
extensive product lines of pharmaceutical
grade health care products including allnatural vitamins, minerals, botanicals, and
high-quality health supplements.
Canadex is committed to developing the
finest products available using only the best
raw materials and cutting-edge technology.
Canadex Laboratories is well positioned in
the health and wellness market, with an
in-house FDA registered pharmaceutical
manufacturing facility and quality control
analytical labs.
Metal / Metallurgy
Hazeland Manufacturing Inc.
CONTACT INFO:
Ben Bouwman
President
P.O. Box 722 10 Highlander St
ST GEORGE BRANT, On;
N0E 1N0
Tel: +1 (519) 448-1190
Fax: +1 (519) 448-1199
[email protected]
www.hazeland.com
About us:
Hazeland Manufacturing Inc. is an
independently owned and operated family
business. We are the manufacturers of
the Hydro-Spade. We believe that our
commitment to quality in both design
and manufacturing will make us easily
recognizable as leaders in vacuum
excavation equipment.
Custom Fabricating :
In addition to offering the Hydro-Spade
products, Hazeland Manufacturing Inc.
also does custom fabricating. Our years
of experience working for and with local
utilities in Southern Ontario has given us
a clear understanding of the needs in the
utilities market.
Apex Precision Inc.
CONTACT INFO:
Wayne Bishop
President
Canada, J7T 2B5
Tel: +1 (450) 510-5556
Fax: +1 (450) 510-5557
on our company and our capabilities,
[email protected]
parts requirement.
32
33
CANADIANEXPORTS
CANADIANEXPORTS
MINING
Metalworking & Metallurgy
Techmire
Norlok Technology
Techmire was founded in 1973, and is today the
world leader in the design and manufacture of
multiple-slide die-casting systems for precision
CONTACT INFO:
components in zinc, lead and magnesium alloys.
Headquartered in Montreal, Canada, Techmire
Leela Hardat
has full turnkey systems capability, including
design, manufacture and testing of die-casting
185 rue Voyageur
after-sales service. Refurbishing of Techmire dieCANADA H9R 6B2
casting systems and major components is also
Tel: 514-694-4110, ext 232 undertaken. Techmire’s customers range in size
Fax: 514-694-2634
from large multinational corporations to small
custom die-casting companies, and are located
[email protected]
in more than 30 countries. These companies
www.techmire.com
use Techmire equipment to produce thousands
of different die-cast components for a broad
spectrum of industries, including: Automotive,
Construction, Electrical /electronics, Consumer
products & Home appliances. ISO 9001:2000
registered QMS
Bohne Spring Industries Ltd.
CONTACT INFO:
Chris Wharin
Director
60 Coronet R
Toronto, Ontario
Canada, M8Z 2M1
Tel: +1 (416) 231-9000
Fax: +1 (416) 231-5365
[email protected]
www.bohnespring.ca
Bohne Spring is a custom spring maker
with a state of the art manufacturing
facility in Toronto, Ontario. Our team of
dedicated employees allow us to meet the
high standards our customers demand.
Our spring manufacturing capabilities
include: compression, extension, torsion,
wire forming, four-slide, small stamping and
light assembly. We are experts in custom
spring manufacturing from prototypes to
large production runs. At Bohne Spring we
offer exceptional quality, on time delivery
and a long tradition of spring design
manufacturing excellence. Our mission is
to be the leading manufacturer of quality
precision springs, wire forms and metal
stampings. Having established a solid
reputation through continuous improvement,
effective cost management and expansion
of business opportunities, we strive to
earn a reasonable return on investment
thereby assuring long term security for our
customers and employees.
CONTACT INFO:
Richele Boatright
26 Adams Blvd
BRANTFORD, Ontario
Canada, N3S 7V2
Tel: +1 (519) 759-5896
Fax: +1 (519) 759-2948
[email protected]
www.norlok.com
For more than 13 years, Norlok Technology, an
ISO 9001:2000 registered company, has led the
way in sheet metal fastening. At our new, efficient
facility, we design and manufacture the SURELOK,
LETTERLOK, WATSON, and CUSTOM machines
that are used by major manufacturers and small
shops all over North America and the world. We pride
ourselves on our friendly and knowledgeable staff and
are always available to answer your questions and
provide you with sheet metal fastening solutions.
From our experienced engineering and service
departments to our production personnel, we always
strive to provide the best product, service and
support in the business.
An extensive distributor network ensures that there
is always someone close by to answer your questions
or attend to your needs. Get a better grip on
sheet metal fastening and call fax or E-mail us.
We’ll be happy to answer any questions or give
you the name of your closest distributor.
Hollbrit Inc.
CONTACT INFO:
Glyn Williams
Owner
WHITBY, Ontario
Canada, L1N 5Z9
Tel: +1 (905) 665-8812
Fax: +1 (905) 665-8815
KN Equipment Inc.
CONTACT INFO:
Bob Nieminen
President
3429 Chemin du Vieux
Pont MCWATTERS, Quebec
Canada, J9X 5B7
Tel: +1 (819) 797-4919
Fax: +1 (819) 797-4924
Since its creation in 1989, KN Equipment
Inc. specializes in the sale of new
and used equipment and spare parts
for the mining industries. Due to our
extended business and mines contacts,
we are able to easily find any type of
equipment (pumps, fans and ventilation
systems, booms and rock breakers, mills
equipments, mobile equipments and
more) no matter the application.
We gladly accept all information requests
for any type of application, within Canada
or for export.
Main products: new & used mining
[email protected] www.kninc.ca equipment: Crushers, portable mills, ball
mills, mobile equipment, locomotives,
pumps, etc.
Hydra Dyne Technology Inc.
[email protected]
and Grinding (For large panels and boxes),
www.hollbrit.com
Hydra Dyne Technology is a company that
designs and manufactures rotary unions,
cylinders and manifolds for some of the
most demanding markets in the world. With
combined experience over three decades, we
are your best resource.
CONTACT INFO:
Steve Bohner
President
55 Samnah Crescent
Ingersoll, Ontario
Canada, N5C 3J7
We are dedicated to the improvement of all
hydraulic components and would like to assist
you in the design and manufacturing of your
product. With our cost effective, innovative,
quality ideas geared to your specific
application, we can improve your product.
Whether it is a standard rotary union design
to improve hose routing or a new prototype
Toll Free: (800) 463-2331 design for a specific application, Hydra Dyne
Phone: (519) 485-2200
has the capacity to build one or whatever the
Fax: (519)485-0255
production quota requested. From concept
[email protected] to production, Hydra Dyne is the company
www.hydradynetechnology.com that has proven itself in more demanding
applications where liability is key to our
customer’s satisfaction.
OIL & GAS
Gentex Oilfield Mfg. Inc.
CONTACT INFO:
Selena Brown
Marketing Coordinator
P.O. Box 858
RED DEER, Alberta
Canada, T4N 5H3
Tel: +1 (403) 341-4155
Fax: +1 (403) 343-1551
[email protected]
www.gentex.ca
GenTex™, formally General Hot Oilers
Inc, was founded in 1997. We specialize
in the manufacturing of truck, trailer and
skid mounted oilfield equipment for the
international and domestic market. We
proudly draw on over 75 years of combined
knowledge and practical experience in
the oil and gas industry. Our research and
development provides our customers with the
most ergonomic hot oil units, heating units,
pump trucks, and pressure trucks available.
Results of a recent GenTex™ customer
satisfaction survey:
With a response rate of 76%, 90% of
GenTex™ customers would purchase from
us again, and 94% would recommend us
to others. Customers cited our ‘reputation’
and ‘quality’ as their top reasons for
choosing GenTex™ to manufacture their
oilfield equipment.
CONTACT INFO:
Joanne Swick
Admin. Mkgt. Asst
Bow Valley Square 1
CALGARY, Alberta
Canada, T2P 2R9
Tel: +1 (403) 269-5531
Fax: +1 (403) 266-3307
[email protected]
www.streamflo.com
Stream-Flo Industries Ltd., is a
privately owned and operated Canadian
manufacturer of wellhead equipment
including SAG D applications, manual and
actuated gate valves and check valves.
Stream-Flo’s check valve line includes
subsea, pipeline and facility applications
with swing, piston and wafer designs.
Manufacturing facilities are located in
Edmonton, Alberta and are accredited to
ISO 9001 and API 6A and 6D.
Since our inception in 1962, we have
become a leader in the oil and gas sector
due to our commitment to providing top
quality products and innovative designs.
Stream-Flo has two subsidiary companies:
Master Flo Valve Inc. produces specialty
control valves, production chokes and pig
ball valves worldwide; ERC Industries is
the equipment renewal division.
34
35
CANADIANEXPORTS
CANADIANEXPORTS
PLASTICS
Packaging, Shipping, & Forwarding
Cam Tran Co. Ltd.
CONTACT INFO:
Terry Irwin
Manager
P.O. Box 866
COLBORNE, Ontario
Canada, K0K 1S0
Tel: +1 (905) 355-3224
Fax: +1 (905) 355-2273
[email protected]
www.camtran.com
Continuous growth has inspired six
expansions to our Colborne facility, the
most recent in 1999. Cam Tran Pacific
was opened in May 1997 in Chilliwack,
BC. The company moved to an expanded
facility in April 2003, with 48000 sq. ft.
of manufacturing space and 3 acres of
outdoor storage.
The Campbell family of companies opened
Cambro Lasertek (metal fabrication plant)
in September 2001 to ensure continuous
supply of transformer tanks at competitive
prices. Cam Tran continues to invest in State
of the Art, computer, production and test
equipment. Experienced personnel combined
with on going training and education
programs have been essential components of
our company growth and improvement.
Quebec Packaging Inc.
CONTACT INFO:
Vito Nobile
President
3526 Industriel Blvd.
MONTRÉAL-NORD, Québec;
Canada, H1H 2Y4
Tel: +1 (514) 326-7000
Fax: +1 (514) 326-5777
[email protected]
www.embque.com
Paper Converters, Papers Buy & Sell, Paper
& Packaging Products, Food grade Paper &
Packaging, Newsprint Papers, Waxed Papers,
Meat Market Papers, Kraft Papers, Paper Table
Covers, Place Mats, Coated Papers, Quilon
& Silicone Coated Papers, Prime & Seconds,
Metalized Papers & Boards, SBS, CCNB,
Duplex Boards, Poly Coated Papers, All Types
of Job-Lot Papers, White Papers, White MG
Wrapping Tissue Papers, Import & Export,
Wholesale Distribution for all types of Paper
and Packaging Products. Plastic Products,
Specialty Food grade Papers and Products...
etc. Quebec Packaging has inventory of over
2,000 Paper & Packaging items. We offer the
best prices, Quality and Service for all your
Paper & Packaging needs! Our entire Inventory
is on sale this month! We present you with our
best price, no hassles. We are so confident
that you will be back for more, we offer many
discounts in addition to our everyday low
prices. Our specialists will answer any of your
Paper & Packaging related questions.
Quantum Scientific Inc.
Quantum Scientific Inc. specializes in
the design and manufacture of custom
aluminum shipping case, transit case, and
CONTACT INFO:
rack mount case technologies for both
Gary Aitchison
commercial and military applications.
Corporate Standards
Impervious to high/low temperature
extremes, altitude, rain, sleet, snow, sand
5938 Ambler Dr.
and dust, all our aluminum shipping
case, transit case and rack mount case
Canada, L4W 2N3
technologies meet ATA (Air Transport
Association) 300, Category 1 specifications
Tel: +1 (905) 625-0770
Fax: +1 (905) 625-6886 and are easily transportable in both
commercial and military environments,
[email protected] regardless of geographical location.
www.cyber-case.com
MSW
CONTACT INFO:
Scott Grills
General Manager
140 Iber Rd
Canada, K2S 1E9
Tel: +1 (613) 742-6766
Fax: +1 (613) 836-2536
[email protected]
www.induspac.com
Manufacture and distribute of
customized corrugated, wood, plastic,
paper and foam protective packaging,
design, manufacturer and distributor of
packaging supplies and inventory and
logistic management systems servicing
Military, Aerospace, High-tech, Medical,
Automotive, Distribution and Government
clients in Canada, USA, Mexico China
(and region) and Europe. Induspac offers
a large variety of protective packaging
products and services. With four major
divisions, working together under one
direction, Induspac is North America’s
most vertically integrated manufacturer
of protective packaging and services.
Four major divisions, countless
possibilities:
• Induscorr: Corrugated sheets and
finished products
• Protecpac: Protective packaging materials
• Protecplast: Film and thermoformed packaging
• Induspac: Specialty packaging and services
Custom Plastic Creations is a world class
leader in the design and manufacturing of
high quality plastic products.
Manufacturer / Processor / Producer of:
Plastic Extrusion, unlaminated Plastic Profile Shape
Manufacturing, plastic pipe and Pipe fitting, PVC
profiles and pipe and all other plastic products.
CONTACT INFO:
Steve Bosman
President
585 Maitland Ave
S LISTOWEL, Ontario
Canada, N4W 2M7
Tel: +1 (519) 418-4000
Fax: +1 (866) 457-9859
[email protected]
www.mswplastics.ca
Custom Plastic Creations
What Makes Us Different:
We ensure that all the products we carry meet our
high expectations for quality; and that we provide
the best pricing and consistent on-time delivery
so that you can concentrate on meeting and
increasing your bottom line.
Steve, the president of MSW Canadian Plastics,
oversees all installations of our products to
ensure that everything is installed correctly and
the end user is satisfied. Steve has acquired
a wide range of experience serving clients in
the hog industry as he has worked with all of
our product lines for many years. Steve spends
a large amount of time travelling overseas to
ensure product quality, and up to date material.
CONTACT INFO:
Steve Strong
President
44 Christopher St
WINNIPEG, Manitoba
Canada, R2C 2Z2
Tel: +1 (204) 224-0436
Fax: +1 (204) 224-0448
[email protected]
www.customplasticcreations.com
Our experience and development expertise
in varied plastic and manufacturing
processes are endless, with leadingedge manufacturing technology and
rigorous ongoing product testing. Our
excellent reputation is attributable to our
craftsmanship, superior quality control and
customer service excellence. These services
include: Thermoforming, Drape Forming,
Pressure Forming, Rotational Molding,
Conventional Patternmaking, In-house
Mold Shop, Rapid Prototyping & CAD-CAM/
Design Capabilities.
We service all industries including:
Recreational, Marine, Food, Security,
Agriculture, Automotive, Aerospace, Mass
Transportation, Consumer Goods & Medical.
36
37
CANADIANEXPORTS
CANADIANEXPORTS
SPorts & Recreation
PRECISION EQUIPMENT & RELATED SERVICES
AK Electromagnetic Inc.
CONTACT INFO:
A. Kumar
President
30 Lippée St;
LES CÔTEAUX, Québec;
Canada, J7X 1H5
Tel: +1 (514) 620-3717
Fax: +1 ((450) 267-1144
AK ELECTROMAGNETIQUE, Inc. is a small
business corporation chartered in Canada.
AK Electromagnetique specializes in the
development and manufacturing of microwave
oven radiation checker, radiation hazard
meters at L-band (MSAT/INMARSAT band)
and UHF (800-900 MHz band), fixed and
mobile antennas for mobile satellite (MSAT
and INMARSAT) services.
We take pride in delivering our customers
[email protected] more than just a high quality product. We
www.canadianexports.org/ also provide service - specialized attention
akelectromagnetic
to individual requirements. Customer
contentment is the prime concern of the
company. With emphasis on “design for
production“ AK Electromagnetique works
closely with its customers and is engaged
in joint efforts combining resources and
technical expertise, making high performance/
cost effective a reality for commercial industry.
Scintrex Trace Corporation
CONTACT INFO:
IDS (Intelligent Detection Systems Inc):
a publicly-traded, independent Canadian
company with operations in the USA, France,
Australia, UK and Brazil, and representatives
in over 50 countries--specializes in state-ofthe-art detection systems.
Guy Couture
Technical Sales/Service V.P. IDS was founded in 1986 as CPAD
Holdings Inc. and, in 1998, acquired
Scintrex Limited creating a new fusion of
300 Parkdale Ave.
advanced technologies, products and skills.
OTTAWA, Ontario
Canada, K1Y 1G2
IDS’ Analytical & Security Division
is focused on the development and
Tel: +1(613) 224-1061
manufacture of explosives and drug
Fax: +1(613) 224-2603
trace detection systems. The Division is
developing the next generation of trace
[email protected]
www.scintrextrace.com chemical detection products aimed at
reducing the threat of terrorism and the
blight of drug trafficking.
Apex Precision Inc.
Cantrawl Nets Ltd.
CONTACT INFO:
Wayne Bishop
President
Canada, J7T 2B5
Tel: +1 (450) 510-5556
Fax: +1 (450) 510-5557 on our company and our capabilities,
[email protected]
parts requirement.
Located in Richmond, British Columbia,
Cantrawl has been in business since 1988
and has gained an excellent reputation
for manufacturing high quality deep sea
CONTACT INFO:
trawls, research trawls and industrial and
marine safety nets. Our net makers also
Robert McIlwaine
have extensive experience in the design
President
and manufacture of a broad range of sports
nets including golf nets, driving range nets,
140-6660 Graybar Rd
RICHMOND, British Columbia divider nets, and crowd control nets.
Canada, V6W 1H9
Cantrawl Nets Ltd. has been in business
since 1988 and has gained an excellent
Tel: +1 (604) 270-6387
Fax: +1 (604) 270-2527 reputation for manufacturing high
quality deep sea fishing nets, research
[email protected]
nets and industrial and marine safety
www.cantrawl.com
nets. Our net makers have extensive
experience in the manufacture of a
broad range of nets including golf
driving range and other sports nets.
SYMCOD Inc.
CONTACT INFO:
Maryse Noline
VP, Sales
Canada, G6P 7L1
Tel: +1 (819) 751-0095
Fax: +1 (819) 751-1292
[email protected]
www.symcod.com
GV Snowshoes
CONTACT INFO:
Vince Lemiex
General Manager
Nova Scotia, Canada
Tel: +1 (902) 752-8000
[email protected]
www.novaleather.com
International Play Company
GV Snowshoes is the only worldwide
specialized manufacturer to produce
wood-framed traditional, aluminum and
composite snowshoes.
Can a snowshoe be sexy? This light
snowshoe combines the latest carbon
fiber technology with GV knowhow to
Ilka Tarin
Sales & Marketing Director create a unique and innovative style
which will meet the demands of the high
605 Stanislas Koska St
tech user. Carbon fiber offers a unique
WENDAKE, Quebec
combination of strength, lightness, and
Canada, G0A 4V0
flex, which, combined with our high end
features such as the Energy Saver TM
Tel: +1 (418) 842-0321
Fax: +1 (418) 842-2003 Pivot Bar, the heel lifter for ascents,
and the quick release ratchet buckles,
[email protected] will truly satisfy anyone who enjoys the
www.raquettesgv.com
advantages of the latest technology.
CONTACT INFO:
We invite you to visit our “snowshoe model
selecting guide” to see which model we
recommend according to your profile.
We design, manufacture and install affordable
indoor and outdoor play structures. Creative
theming is available and many activities and
interactive events offer fun and excitement for
children of all ages.
CONTACT INFO:
Franco Aquila
CEO
We have installed in over 40 countries worldwide.
All of our playgrounds meet the high standards
forsafety worldwide. Indoor Playgrounds: Design,
manufacture and install any size indoor play
structure to businesses worldwide.
20216, 98th Ave
LANGLEY, British Columbia
Canada, V1M 3G1
Outdoor Playgrounds: Design, manufacture and
install outdoor playgrounds for churches, resorts,
Tel: +1 (604) 882-1188
zoos, community centers, day cares, race tracks,
Fax: +1 (604) 882-1977
skate parks, and more.
[email protected]
www.iplayco.com
The play equipment of both IPC indoor and
outdoor divisions are theme orientated and
designed to inspire a child’s imagination. It is
the business objective to provide a line of safe
interactive play environments, which stimulate a
child’s mind and body.
38
39
CANADIANEXPORTS
CANADIANEXPORTS
Textile & Clothing
TELECOMMUNICATIONS
CONTACT INFO:
Rob Muru
President
51 McCormack St
YORK, Ontario
Canada, M6N 1X8
Tel: +1 (416) 769-4557
Fax: +1 (416) 769-7975
[email protected]
www.a-linetool.com
Bendies Forms Inc.
Contretron Inc.
Contretron Inc, formerly known as: Canadian
Counter Measures Electronics Inc. (CCME) has
been designing and manufacturing innovative
test equipment for the Telecommunications,
CONTACT INFO:
Utility and Security Industries since 1986. We
specialize in innovative R&D design, creating
Don Elliott
unique, cost effective solutions to today’s wire
President
and cable problems. We are also Electronic
Counter Surveillance specialist’s advising
6440 Notre-Dame St
government and law enforcement agencies
W MONTRÉAL, Québec
worldwide on cost-effective solutions to the
Canada, H4C 1V4
detection of illegal electronic eavesdropping
Tel: +1 (514) 933-5752
devices. As part of our Security Division,
Fax: +1 (514) 933-4128 we are Research Electronics Intl. (REI)
distributors for Canada. REI designs and
[email protected] manufactures a unique line of electronic
www.cablelocators.com
security products that have become standard
tools for Government and Corporate security
departments around the world.
CONTACT INFO:
Robert Graves
President
480 Robinson St
S GRANBY, Quebec
Canada, J2G 7N4
Tel: +1 (450) 378-9928
Fax: +1 (450) 375-4672
lesformesbendies@
bellnet.ca
www.bendiesforms.com
Bendies Forms Inc. is a manufacturer of
mannequins, displays and props made from
S polyurethane foam with a Flexi skin or
flocking finish, they are located in Granby.
Custom manufacturing: Bendies also offers you
custom designs to your specifications. Send your
sketches to the company and we will manufacture
mannequins, forms and displays for you.
Subcontracting: You have an article to
produce? Give the production to Bendies Forms
subcontracting services. Part forming services
are available for soft foam, flocking on wooden
parts, fiberglass, metal, aluminum and plastic.
Become a distributor: You are interested in
becoming a distributor for Bendies Forms? Fill in
the form on our website to submit your application.
A representative will contact you to validate your
information and give you extra information.
CCME is based in Montreal, Canada, and
exports worldwide.
GV Snowshoes
Delphi Fur Limited
CONTACT INFO:
Theodore Vrantzoglow
President
460 St. Catherine St.
West, Suite 314
Montreal - Quebec;
Canada, H3B1A7
Tel: +1 514-849-1585
Fax: +1 514-849-1585
[email protected]
www.canadianexports.org/
delphi
Since it’s creation in 1975, Delphi Fur Ltd.,
has been one of Canada’s leading custom
design manufacturers of Fur Coats for
discerning men and women around the world.
Theodore Vrantzoglow, President, has been
the driving force behind Delphi’s success
since its inception.
With production facilities in Montreal
Canada, their extensive selection, value
pricing, and rapid turn around time, are
certain to impress you.
In addition to fur coats, Delphi also
specializes in custom design Leather Jackets.
For more information, please contact us.
Bastien Industries
GV Snowshoes is the only worldwide
specialized manufacturer to produce
wood-framed traditional, aluminum and
composite snowshoes.
Can a snowshoe be sexy? This light
snowshoe combines the latest carbon
Ilka Tarin
fiber technology with GV knowhow to
Sales & Marketing Director create a unique and innovative style
which will meet the demands of the high
605 Stanislas Koska St
tech user. Carbon fiber offers a unique
WENDAKE, Quebec
combination of strength, lightness, and
Canada, G0A 4V0
flex, which, combined with our high end
features such as the Energy Saver TM
Tel: +1 (418) 842-0321
Fax: +1 (418) 842-2003 Pivot Bar, the heel lifter for ascents,
and the quick release ratchet buckles,
[email protected] will truly satisfy anyone who enjoys the
www.raquettesgv.com
advantages of the latest technology.
CONTACT INFO:
We invite you to visit our “snowshoe model
selecting guide” to see which model we
recommend according to your profile.
CONTACT INFO:
Ginette Bastien
Owner
WENDAKE, Québec
Canada, G0A 4V0
Tel: +1 (418) 842-1330
Fax: +1 (418) 842-1330
bastien.industries@
qc.aira.com
Quebec city at Village Huron (Wendake).
Our company is famous for the excellence
of his moccasins, snowshoes and Indian
novelties. Maurice Bastien, former Grand
Chief of Huron-Wendat tribe, was an expert
in the production of snowshoes, to which
he confined his manufacturing operations
until he started the manufacture of
moccasins. The popular HIAWATHA brand
of hand beaded moccasins, which bear the
skilful needlecraft of the majority of the
women of Wendake village, are distributed
40
CANADIANEXPORTS
Importer & Exporter Service Form
If you are an International business, and need our help to source any product or service from
Canada, or need to receive “Canadian exports”;
OR
If you are a Canadian business, who is listed in “Canadian Exports” and need our help at any stage
of the export process; fill out this form, fax , e-mail or mail it to us. Alternatively, you can call us.
Name:
Job Title:
Company:
Mailing Address:
City, Province (State):
Country:
Postal Code:
Phone:
Fax:
E-mail:
Website:
Signature:
Date:
Please write here any
specific need or
service from us
Notes:
(1) All our services are free
(2) Use additional sheets if necessary
(3) This form is also available on our website.

aboutcanada - Canadian Exports | Promoting Canadian Exports

Transcription

Similar documents

Welcome to - Serviced Office

the program brochure

Multi System Tables - Bilhares Carlos Teofilo

rubber and composite solutions provider

HistoryWall DM v1 english

swimwear up to aj cup

FL60 - Leaflet Glamox Aqua Signal

PhotoWall

Occupational Health Clinics for Ontario Workers

1998 BCP/Wheelabrator Pass Thru Shotblast M