perator@s lion 300 lion 301

Transcription

perator@s lion 300 lion 301
GB
/PERATOR@SMANUAL
).3425#4)/.3&/202/$5#4$%,)6%290AGE
4RANSLATIONOFTHEORIGINAL/PERATING-ANUAL
.R 99 8731.GB.80J.0
LION 300
LION 301
(Type 8731 : + . . 01001)
Rotary Harrow
Ihre / Your / Votre • Masch.Nr. • Fgst.Ident.Nr.
GB
Dear Farmer
You have just made an excellent choice. Naturally we are very happy
and wish to congratulate you for having chosen Pöttinger. As your
agricultural partner, we offer you quality and efficiency combined with
reliable servicing.
In order to assess the spare-parts demand for our agricultural machines
and to take these demands into consideration when developing new
machines, we would ask you to provide us with some details.
Furthermore, we will also be able to inform you of new developments.
Important information concerning Product
Liability.
According to the laws governing product liability, the manufacturer and dealer are obliged to hand the
operating manual to the customer at the time of sale, and to instruct them in the recommended operating,
safety, and maintenance regulations. Confirmation is necessary to prove that the machine and operating
manual have been handed over accordingly.
For this purpose,
- document A is to be signed and sent to Pöttinger,
- document B remains with the dealer supplying the machine,
- and the customer receives document C.
In accordance with the laws of product liability, every farmer is an entrepreneur.
According to the laws of product liability, property damage is damage caused by a machine and not to
it. An excess of Euro 500 is provided for such a liabilioty.
In accordance with the laws of product liability, entrepreneurial property damages are excluded from
the liability.
Attention! Should the customer resell the machine at a later date, the operating manual must be given
to the new owner who must then be instructed in the recommended regulations referred to herein.
Pöttinger Newsletter
www.poettinger.at/landtechnik/index_news.htm
The latest expert information, useful links and entertainment
ALLG./BA SEITE 2 / 0000-GB
GB
INSTRUCTIONS FOR
PRODUCT DELIVERY
Dokument
ALOIS PÖTTINGER Maschinenfabrik GmbH
A-4710 Grieskirchen
Tel. (07248) 600 -0
Telefax (07248) 600-2511
GEBR. PÖTTINGER GMBH
D-86899 Landsberg/Lech, Spöttinger-Straße 24
Telefon (0 81 91) 92 99-111 / 112
Telefax (0 81 91) 92 99-188
D
GEBR. PÖTTINGER GMBH
Servicezentrum
D-86899 Landsberg/Lech, Spöttinger-Straße 24
Telefon (0 81 91) 92 99-130 / 231
Telefax (0 81 91) 59 656
According to the product liability please check the above mentioned items.
Please check.
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
X
Machine checked according to delivery note. All attached parts removed. All safety equipment, drive shaft and operating
devices at hand.
Operation and maintenance of machine and/or implement according to operating instructions explained to the customer.
Tyres checked re. correct pressure.
Wheel nuts checked re. tightness.
Drive shaft cut to correct lenght.
Correct power-take-off speed indicated.
Fitting to tractor carried out: to three-point linkage
Trial run carried out and no defects found.
Functions explained during trial run.
Pivoting in transporting and operating position explained.
Information given re. optional extras.
Absolute need to read the operating manual indicated.
In order to prove that the machine and the operating manual have been properly delivered, a confirmation is necessary.
For this purpose please do the following:
- sign the document A and send it to the company Pöttinger
(in case of Landsberg equipment: to the company Landsberg)
- document B stays with the specialist factory delivering the machine.
- document C stays with the customer.
GB-0600 Dokum D Anbaugeräte
-3-
CONTENTS
GB
Table of contents
WARNING SIGNS
CE sign .............................................................................................. 5
Meaning of warning signs ................................................................. 5
Observe Safety
Points in
Supplement A!
CONNECTING TO TRACTOR
Preparing the tractor ......................................................................... 6
Lifting gear......................................................................................... 6
Preparing the implement ................................................................... 6
Track loosener (Optional equipment)................................................. 6
Quick-coupler .................................................................................... 7
Connecting to the tractor .................................................................. 7
Disconnecting from tractor................................................................ 7
OPERATION
On-road transport position ............................................................... 8
Lightning during use on roads........................................................... 8
Check before putting into operation ................................................. 8
Power-take-off r.p.m. 1000 min-1 ...................................................... 8
Changing the gear wheels ................................................................. 8
Rotor r.p.m. for implement with normal transmission ....................... 9
Rotor r.p.m. for implement with change speed transmission.......... 10
Working depth adjustment .............................................................. 11
Stripping plates ............................................................................... 11
Side shields ..................................................................................... 11
Safety points ................................................................................... 11
HYDRAULIC RELIEF
Hydraulic Relief function ................................................................. 12
Setting the pressure ........................................................................ 12
OVERLOAD CUT-OUT
Cam clutch function ........................................................................ 13
Cam clutch adjustment ................................................................... 13
Dismantling the cam clutch ............................................................. 13
ATTACHABLE IMPLEMENTS
Triangular bracket for ACCORD Attachable Sower ........................ 14
Triangular bracket for AEROSEM Attachable Sower ...................... 14
V-belt pulley installation................................................................... 15
Fitting an ACCORD Sower .............................................................. 16
Removal of ACCORD Sower .......................................................... 16
Hydrolift for sower with universal drive ........................................... 17
Lifting limiter for Hydrolift ................................................................ 17
Safety device for on-road transportation ........................................ 17
MAINTENANCE AND SERVICE
Advice for general maintence .......................................................... 19
Changing the tines .......................................................................... 19
Drive shaft ....................................................................................... 19
Cleaning of machine parts .............................................................. 19
Winter storage ................................................................................. 19
Spur wheel - angular gear ............................................................... 19
Change speed transmission ........................................................... 19
Lubrication chart ............................................................................. 20
TECHNICAL DATA
Technical data ................................................................................. 22
The Defined Use of the Rotary Harrow ........................................... 23
Location of Identification Plate ........................................................ 23
SUPPLEMENT
Recommendations for work safety ................................................ 26
Driveshaft ........................................................................................ 27
Lubricants........................................................................................ 29
Combination of tractor and mounted implement ............................ 36
0800_GB-Inhalt_8731
-4-
WARNING SIGNS
GB
CE sign
The CE sign, which is affixed by the manufacturer, indicates outwardly that this machine conforms to the engineering
guideline regulations and the other relevant EU guidelines.
EU Declaration of Conformity
By signing the EU Declaration of Conformity, the manufacturer declares that the machine being brought into service
complies with all relevant safety and health requirements.
Recommendations for work safety !
All points referring to satety in this manual are indicated by this sign.
Meaning of warning signs
Danger - stay clear of rotating machine
parts
Danger-flying objects; keep safe distance
from the machine as long as the engine is
running.
bsb 447 410
Never reach into the crushing danger area as
long as parts may move.
Not step onto the machine when PTO is
connected and engine is running.
9700-GB AZB_873
-5-
CONNECTING TO TRACTOR
Preparing the tractor
Ballast weight:
Observe Safety points in Supplement!
Lifting gear
- The left and right lifting struts (4) must be the same length.
Adjust using adjuster (3).
- If lifting struts (4) can be pinned at various positions on the lower
links, then select the back position (H). In doing this, the tractor’s
hydraulics will not be so greatly overloaded.
- Pin (2) upper link (1) in accordance with the manufacturer’s
specifications.
- Secure lower links with struts (5) so that attached implement cannot
swing out during transportation.
Preparing the implement
Mounting axle
Install correct mounting bar on tractor’s lifting gear which corresponds
to the connecting size (Category II or III). See Spare Parts List also.
Upper link pins
- Secure safety chord (6) in unused hole.
Track loosener (Optional equipment)
Only use track loosener when working on ploughed ground!
(873) ANBAU 0000-GB
-6-
GB
CONNECTING TO TRACTOR
Quick-coupler
Variation
Both quick-couplers can be pinned (B) in four positions.
Implement should be connected as close as possible to tractor.
- Insert pins (B) in the appropriate position and secure with linch pin.
Connecting to the tractor
- Insert mounting bar (Category II / III) into the lower links and secure with linch
pin.
Variation: Quick-coupler
- Release locking hooks by pulling rope (S).
- Let rope go and locking hooks remain released.
- Swing mounting bar into quick-coupler using the servo-valve.
Locking hooks then lock automatically.
- Secure upper link (1) and set implement horizontally.
Connect drive shaft
- Check drive shaft length and adapt if necessary before initial operation.
See chapter "Drive Shaft" in Supplement B also.
Connecting drive shaft section to rotary harrow
- Remove guard plate (60).
- Place drive shaft with overload cut-out into drive stub and wedge in with
screw.
- Refit guard plate (60).
Disconnecting from tractor
- Park implement on firm and even ground.
- Uncouple drive shaft from tractor.
- Remove upper link from implement.
Variation: Quick-coupler
- Release locking hooks by pulling on rope (S) and swing mounting bar out of
the quick-coupler.
- Remove rope (S) from tractor cabin.
(873) ANBAU 0000-GB
-7-
GB
OPERATION
On-road transport position
LION 4000, LION 4001, LION 4500: see page 21.
LION 300, LION 301, LION 3000, LION 3001: Raise side
pieces so that implement’s total length is under 3 m.
GB
Safety point
Danger - stay clear of
rotating machine parts.
Observe safety distance
when engine is running
with p.t.o. connected.
Power-take-off r.p.m. 1000 min-1
This r.p.m. is preferable so that various drive components
on the tractor and implement are not subject to additional
load.
Power-take-off r.p.m. 540 min-1 / 750 min-1
This r.p.m. should only be used when working on light
ground and with tractor’s with less than 90 hp (66kW).
Changing the gear wheels
- Tilt implement forward in order prevent gear oil from running out.
Lightning during use on roads
- Remove gear housing cover (7).
If desired, a lightning unit can be supplied.
For single parts see spare parts list.
Check before putting into operation
- Implement connected horizontally.
- Upper link correctly positioned.
- Lower link (4) laterally secured.
- Slip gear wheels (Z1 and Z2) on in accordance with table.
- Refit gear housing cover (7).
LION 251, LION 301
LION 3001, LION 4001
LION 251, LION 301
LION 3001, LION 4001
- Drive shaft adapted to correct length.
- Rotary r.p.m. pre-selected per table.
(873) EINSATZ 0100-GB
-8-
OPERATION
GB
LION 3000
Rotor r.p.m. for implement with normal transmission
LION 3000
MaschNr: . . . - 1784
The rotor r.p.m. is to be preselected from the table according to operating conditions and tractor power.
Gear wheels Z17 / Z23 and Z16 / Z24 are available upon request for standard transmissions. See Spare Parts
List also.
LION 250, LION 300, LION 3000
Rotor r.p.m. for implement with normal transmission
LION 250
LION 300
LION 3000
MaschNr: . . . + 1001
MaschNr: . . . + 1001
MaschNr: . . . + 1785
The rotor r.p.m. is to be preselected from the table according to operating conditions and tractor power.
Gear wheels
• Z 17 / Z 23
• Z16 / Z 24
• Z 18 / Z 22
• Z 19 / Z 21 are available upon request for standard transmissions.
See Spare Parts List also.
(873) EINSATZ 0100-GB
-9-
OPERATION
Rotor r.p.m. for implement with change speed transmission
(Optional equipment LION 3000
construction year - 1998)
The rotor r.p.m. is to be preselected from the table according to operating
conditions and tractor power.
No additional gear wheels are necessary for change speed transmissions.
Rotor r.p.m. is preselected through the gear wheels (Z1
and Z2) position and corresponding changing position
(I, II, III) of the lever (H).
LION 251, LION 301, LION 3001
Rotor r.p.m. for implement with normal transmission
The rotor r.p.m. is to be preselected from the table according to operating conditions and tractor power.
Gear wheels, Z 26 / Z 39, Z 29 / Z 36, Z 31 / Z 34 are available upon request for standard transmissions.
See Spare Parts List also.
(873) EINSATZ 0100-GB
- 10 -
GB
OPERATION
Working depth adjustment
GB
Side shields
Side shields (20) can be
screwed on at various
points.
The working depth (T) is determined by the swivel range of the
attached roller.
The left and right bolts act as buffers when they are placed in
corresponding holes in the hole pattern.
The position should suit the
working depth.
Front deflector
Front deflector (30) height is adjustable and therefore adapts to
the respective working depth. This enables clumps to be evenly
distributed through to
the following rotor.
Rear deflector
(Optional equipment)
Rear deflector (31) height is adjustable and therefore adapts to the
respective working depth.
In addition, the gap (X) can be set to the rotors.
For safety reasons, implement should stand on the
ground when adjustments are being made.
With dry ground a small gap enables the clumps to be broken up
well. A slightly higher performance is required from the drive for this
than with a wider gap.
- Twist and remove bolts.
- Place left and right bolts in the corresponding holes and
secure by twisting.
Stripping plates
Adjusting stripper carrier is
carried out by unscrewing
both nuts (11) left and
right.
Check beforehand that
individual stripping plates
(10) are equidistant to the
roller.
Adjusting the Stripping
plates
- Turn roller, thereby checking
the stripper plate (10) gap.
- Loosen hexagonal screw
(SK) and correctly set
stripper plate.
With damp and sticky ground the rear deflector should be set at
the highest position or removed.
Safety points
• Only operate the machine under the following
conditions:
1. when the front rail (30)
is installed and/or
- when the both
protection tubes
(30a) are installed.
2. when the rear rail (31)
or a trailing implement
(cage drum roller, Packer roller) is attached.
3. when both side shields (20)
are swivelled down and the
appropriate working depth is
set.
• Stay clear while engine
is running.
bsb 447 410
Keep people out of the danger area where the risk of injury from
ejected foreign bodies exists.
- Turn roller once again and check.
Take particular care on stoney fields, and near streets and roads.
• Turn p.t.o. off when raising the machine.
(873) EINSATZ 0100-GB
- 11 -
HYDRAULIC RELIEF
GB
Hydraulic Relief function
- Both hydraulic cylinders relieve the rotor units during
hydro-reservoir pressurizing.
- Pressure from the rotary harrow (through the weight of
the rotary harrows and sower) is transferred onto the
packer roller.
- The rotary harrow can lift itself over obstacles more
easily and carefully.
- The pressure in the central hydraulic system is adjusted
from the tractor
Setting the pressure
1. Open stop valve (pos. 1)
2. Actuate control unit on tractor
3. Pressurize Hydro-reservoir with 50 – 100 bar
4. Close stop valve (pos. 0)
Beware!
Relief table
Pressure (bar)
Relief (kg) approx.
50
570
60
750
70
850
80
970
90
1070
100
1260
0500_GB-Hydr-Entlastung_873
No welding,
soldering or
mechanical works
of any kind may
be carried out on
the container.
- 12 -
OVERLOAD CUT-OUT
Cam clutch function
The cam clutch switches the drive off when it becomes overloaded.
The switched off clutch can be switched on again by uncoupling the p.t.o.
drive.
Take note!
Sensible operation prevents frequent clutch response and preserves against
unnecessary wear and tear.
Cam clutch adjustment
The factory setting is 180 daNm. This corresponds to a setting of
L = 126.5 mm.
Dismantling the cam clutch
- Only dismantle clutch when locking cam is engaged (E).
- Note fitting position of locking cam (SN) when dismantling.
- Remove spring bolt (F).
Take note!
Both compression springs on the spring bolt must be equally tensioned
firmly.
9200 GB GWSICHERUNG (873)
- 13 -
GB
ATTACHABLE IMPLEMENTS
Optional equipment:
Triangular bracket for ACCORD Attachable Sower
- Fit triangular bracket as per drawing.
- Install V-belt pulley at a distance (137 mm) of to the triangular
bracket
- see next page.
Note
Follow the Attachable Sower Installation and Operating Manual
also.
Optional equipment:
Triangular bracket for AEROSEM Attachable Sower
- Fit triangular bracket as per drawing.
- Install V-belt pulley at a distance of 115 mm to the triangular
bracket
- see next page.
Note
Follow the Attachable Sower Installation and Operating Manual
also.
(873) 0900-GB SATTELDREIECK
- 14 -
GB
ATTACHABLE IMPLEMENTS
V-belt pulley installation
AEROSEM: Distance (115 mm) to the triangular bracket (see previous page)
- V-belt pulley is tightened firmly onto the p.t.o. stub using the attachment
screw (72).
The illustrations show the possible V-belt pulley fitting positions (P1,
P2, P3, and P4) to the flange coupling.
- Ring (RI) can be fitted in fitting position P5 as well.
- Slide the flange coupling far enough (0 mm) onto the p.t.o. section.
ACCORD: Distance (137 mm) to the triangular bracket
- V-belt pulley is tightened firmly onto the p.t.o. stub using the cone
(71).
- Screw in hexagonal screws (SK) with 3.3 daNm (kpm).
The illustrations show the possible V-belt pulley fitting positions (P1,
P2, P3, and P4) to the flange coupling.
- The distance of 137 mm to the triangular bracket can be achieved in
fitting position P4.
- Slide the flange coupling far
enough (min. 15 mm) onto the
p.t.o. section.
(873) 0900-GB SATTELDREIECK
- 15 -
GB
ATTACHABLE IMPLEMENTS
- Fit both trim panels (51 and 52) and secure with wing screw
(75).
Fitting an ACCORD Sower
Ballast weight:
Observe Safety points in Supplement!
- Place sower onto supports.
- Couple implement to triangular bracket of rotary harrow.
- Secure triangular bracket with
bolts (78).
Removal of ACCORD Sower
- Install supports and lower sower to ground.
- Remove trim panels (51 and 52).
- Move lever (76) and remove both drive V-belts.
- Unscrew bolts (78) and release triangular bracket.
- Uncouple implement.
- Move lever (76) and fit both drive V-belts.
Transport position
(873) 0900-GB SATTELDREIECK
GB
- 16 -
ATTACHABLE IMPLEMENTS
Optional equipment:
GB
Optional equipment:
Hydrolift for sower with universal drive
Lifting limiter for Hydrolift
In order not to exceed the maximum allowable drive shaft angle
when raising the attached implement, the additional "Lifting Limiter"
unit is recommended.
The position of catch hooks (80) must be brought into line with sower
to be attached.
Select the hole spacing (A) of the upper and lower suspension according
to the diameter of the trailing roller and pin straight away.
The universal drive of the attached implement is coupled to the
transmission.
After fitting sower, safety bracket (81) must
be slipped onto lifting lugs and secured
with linch pin.
Adjusting the Lifting Limiter
81
- Open stop valve (Position E).
- Raise attached sower to the maximum allowable drive shaft angle
using Hydrolift.
TD65/92/40
- Slip pins (85) into the next hole after the end of the limiter bar
(86).
The pins now act as buffers and consequently limit the l i f t i n g
height.
Safety device for on-road transportation
- Using the Hydrolift raise attached sower for transportation.
- Close stop valve (Position A).
In doing this the attached implement cannot sink to ground level
should the hydraulics become defective.
The screw (S) is to stabilize the attached implement in the raised
position (e.g. transport).
As an additional precaution the limiter bar (86) can be secured with
pins (85).
- Slip pins into into slot (L) on the limiter bar (86).
If this additional precaution is not desired.
Setting:
- turn screw (S) completely in
- Slip pins into the last hole (X).
- completely raise hydrolift with attached implement
Note
- unscrew screw until under pressure from the lower suspension
bracket (L).
- fix screw with lock nut
(873) 0900-GB SATTELDREIECK
- 17 -
Follow the Attachable Sower Installation and Operating Manual
also.
ATTACHABLE IMPLEMENTS
Alternative to the hydrolift:
Connecting parts
(only for LION 300; LION 3000; L25; L30)
The position of catch hooks (80) must
be brought into line with sower to be
attached.
81
TD65/92/40
The universal drive of the attached
implement is coupled to the
transmission.
After fitting sower, safety bracket (81)
must be slipped onto lifting lugs and
secured with linch pin.
(873) 0900-GB SATTELDREIECK
- 18 -
GB
MAINTENANCE AND SERVICE
Advice for general maintence
GB
Spur wheel - angular gear
In order to keep the implement in good condition even after a
longer service life, please observe the following advice.
- First oil change is after 50 hours of operation.
- Further oil change after 100 hours of operation.
Amount of oil:
~ 4,2 liters SAE 90
Safety points
- Park machine horizontally.
• Tu r n e n g i n e o ff w h e n
adjustment, service and repair
work is to be done.
- Remove oil drain plug (90), drain old oil out and dispose of in the
proper manner.
- Screw oil drain plug (90) in again.
• Do not work under the machine
without safe support.
- Remove oil filler screw and oil measuring stick (91) and fill until
oil level reaches "A".
- Retighten all screws after the first hours of operation.
- Check oil level before putting into operation.
- Observe maintenance advice for spur wheel - angular gear.
- The spur wheel gear in the rotor bar is maintenance free.
Changing the tines
Damaged or worn rotor tines are to be replaced.
Observe the correct fitting position of each rotor
tine (see Spare Parts list).
Both screws (SK) are to be glued into place with
Loctite 243 or another equivalent product, and
tightened to 290 Nm (29 kpm).
Drive shaft
- Lubricate drive shaft every 8 hours of operation.
- Take sliding sections apart and grease well.
Cleaning of machine parts
Attention ! ! !
Do not use a high
pressure cleaner to
clean bearings and
hydraulic parts.
Change speed transmission
(LION 3000, LION 4000)
- First oil change is after 50 hours of operation.
- Danger of rust
formation!
- Further oil change after 100 hours of operation.
Amount of oil:
- Aftercleaning,grease
machine according
to lubrication chart
and carry out a short
test run.
L = Ventilating screw: is removed to enable oil filling.
N = Level screw: oil level is correct when it reaches the same level
as the screw.
A = Drain plug.
- If pressure is to great when cleaning, damage to paintwork can
occur.
Winter storage
- Thoroughly clean the machine beforehand.
- Park where protected against weather.
- Change or top-up gear oil.
- Protect all exposed sections against rust.
- Grease all greasing points according to lubrication chart.
9401 GB WARTUNG (873)
4 liters SAE 90
- 19 -
FETT
Schmierplan
D
X
40 F
80 F
1J
100 ha
FETT
h
=
=
(IV)
Liter
*
alle X Betriebsstunden
alle 40 Fuhren
alle 80 Fuhren
1 x jährlich
alle 100 Hektar
FETT
X
40 F
80 F
1J
100 ha
FETT
h
Anzahl der Schmiernippel
Anzahl der Schmiernippel
Siehe Anhang "Betriebsstoffe"
Liter
Variante
Plan de graissage
F
=
=
(IV)
Liter
*
Siehe Anleitung des Herstellers
Smeerschema
NL
X
40 F
80 F
1J
100 ha
FETT
h
=
=
(IV)
Liter
*
alle X bedrijfsuren
alle 40 wagenladingen
alle 80 wagenladingen
1 x jaarlijks
alle 100 hectaren
VET
Aantal smeernippels
Aantal smeernippels
Zie aanhangsel "Smeermiddelen"
Liter
Varianten
zie gebruiksaanwijzing van de fabrikant
Toutes les X heures de service
Tous les 40 voyages
Tous les 80 voyages
1 fois par an
tous les 100 hectares
GRAISSE
X
40 F
80 F
1J
100 ha
FETT
h
Esquema de lubricación
E
X
40 F
80 F
1J
100 ha
FETT
h
Cada X horas de servicio
Cada 40 viajes
Cada 80 viajes
1 vez al año
Cada 100 hectáreas
LUBRICANTE
Número dos bocais de lubrificação
=
(IV)
Liter
*
Número dos bocais de lubrificação
Ver anexo ”Lubrificantes"
Litro
Variante
X
40 F
80 F
1J
100 ha
FETT
h
=
(IV)
Liter
*
Número de boquillas de engrase
Véase anexo “Lubrificantes”
Litros
Variante
=
(IV)
Liter
*
- 20 -
Number of grease nipples
Number of grease nipples
see supplement "Lubrificants"
Litre
Variation
Schema di lubrificazione
I
=
Véanse instrucciones del fabricante
after every X hours operation
all 40 loads
all 80 loads
once a year
every 100 hectares
GREASE
See manufacturer’s instructions
Número de boquillas de engrase
Ver instruções do fabricante
9900-ZENTRAL_LEGENDE-SCHMIERPLAN
=
(IV)
Liter
*
=
Em cada X horas de serviço
Em cada 40 transportes
Em cada 80 transportes
1x por ano
Em cada100 hectares
Lubrificante
=
=
Voir le guide du constructeur
Plano de lubrificação
P
X
40 F
80 F
1J
100 ha
FETT
h
Nombre de graisseurs
Nombre de graisseurs
Voir annexe "Lubrifiants"
Litre
Variante
Lubrication chart
GB
ogni X ore di esercizio
ogni 40 viaggi
ogni 80 viaggi
volta all'anno
ogni 100 ettari
GRASSO
Numero degli ingrassatori
Numero degli ingrassatori
vedi capitolo “materiali di esercizio”
litri
variante
vedi istruzioni del fabbricante
0000 SCHMIERPLAN_873
- 21 -
TECHNICAL DATA
GB
Technical data
LION 300 / 301
LION 3000 / 3001
LION 4000 / 4001
(Type 8731)
(Type 873)
(Type 874)
With packer roller
1,4 m
1,4 m
1,4 m
Cage drum roller
1,2 m
1,2 m
-
Spiral roller
1,4 m
1,4 m
-
Height (approx)
1,3 m
1,3 m
1,3 m
Working width
3,0 m
3,0 m
4,0 m
Transporting width
<3m
<3m
<3m
No. of rotors
10
10
14
Working depth/Tine length
25 / 29 cm
28 / 32 cm
28 / 32 cm
min.
50 kW (68 hp)
60 kW (82 hp)
80 kW (110 hp)
max.
134 kW (180 hp)
156kW (210 hp)
186kW (250 hp)
Drive r.p.m.
1000 / 750 / 540 min-1 (r.p.m.)
1000 / 750 / 540 min-1 (r.p.m.)
1000 min-1 (r.p.m.)
Weight – basic implement
Subject to alterations due to technical advancement
without notice.
Length:
Requisite power
894 kg
980 kg
1290 kg
Coupled with packer roller 500 mm ø (approx)
1325 kg
1455 kg
1750 kg
Coupled with packer roller 420 mm ø (approx)
1195 kg
1325 kg
-
Coupled with cage drum roller 370 mm ø (approx)
1035 kg
1165 kg
-
Coupled with cage drum roller 420 mm ø (approx)
1090 kg
1220 kg
-
Coupled with cage drum roller 540 mm ø (approx)
-
1260 kg
-
Coupled with spiral roller (approx)
1185 kg
1315 kg
-
<70 dB(A)
<70 dB(A)
<70 dB(A)
Permanent sound emission level
0800-GB TECHNISCHE DATEN_873
- 22 -
TECHNICAL DATA
GB
Location of Identification Plate
The serial number is struck into the Vehicle Identification Plate shown opposite,
and into the frame. Guarantee claims and queries cannot be processed without
the serial number being given.
Please enter the number on the title page of the operating manual immediately
upon taking possession of the vehicle/implement.
The Defined Use of the Rotary Harrow
The "LION" Rotary Harrow is intended for normal use in agricultural work.
• To prepare the top layer of arable land for sowing afterwards.
Any other uses are regarded as not included in this definition. The manufacturer takes no responsibility for any resulting damage which
occurs henceforth.
The risk is carried solely be the user.
• The keeping of operating, service and maintenance requirements layed down by the manufacturer also come under the heading of „defined
use“.
Optional equipment:
Rear deflector
Track loosener (4 pieces)
Hydrolift for sower
Lift limiter for Hydrolift
Triangular bracket for pneumatic attachable sower
LION 300
LION 301
LION 3000
LION 3001
LION 4000
LION 4001
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P.T.O. output shaft
LION 301
LION 3001
LION 4001
Gear wheels (Z1 , Z2)
- see "OPERATION"
0800-GB TECHNISCHE DATEN_873
- 23 -
GB
SUPPLEMENT
GB-Anhang Titelblatt _BA-Allgemein
The original cannot be copied ...
GB
Things will run better with
genuine Pöttinger parts
• Quality and precise fitting
- Operating safety.
• Reliable operation
• Longer lasting
- Economy
• Guaranteed availability through your
Pöttinger Sales Service.
GB-Anhang Titelblatt _BA-Allgemein
The decision must be made, ”original” or ”imitation”? The decision is often governed
by price and a ”cheap buy” can sometimes be very expensive.
Be sure you purchase the ”Original” with the cloverleaf symbol!
SUPPLEMENT - A
Recommendations for work safety
Recommendations for work safety
6.) Transport of persons prohibited
All points refering to safety in this manual are indicated
by this sign.
a. The transport of persons on the machine is not permitted.
b. The machine may only be driven on public roads when in the
position stipulated for road transport.
1.) Defined use
a. See "Technical Data".
7.) Driving ability with auxiliary equipment
b. The keeping of operating, service and maintenance requirements
layed down by the manufacturer also come under the heading of
"defined use".
a. The towing vehicle is to be sufficiently equiped with weights at the
front or at the rear in order to guarantee the steering and braking
capacity (a minimum of 20% of the vehicle’s tare weight on the
front axle).
2.) Spare parts
b.
a. The original components and accessories have been designed
especially for these machines and appliances.
b. We want to make it quite clear that components and accesories
that have not been supplied by us have not been tested by us.
c. The installation and/or use of such products can, therefore,
The driving ability is
in fluen ced by ground
conditions and by the
auxiliary equipment. The
driving must be adapted
to the cor re spon ding
terrain and ground
conditions.
Kg
20%
c. When driving through
curves with a connected
appliance, observe the
ra dius and swinging
mass of the appliance.
d. When travelling in a curve with attached or semimounted
implements, take into account the working range and swing mass
of the implement!
8.) General
negatively change or influence the construction characteristics
of the appliance. We are not liable for damages caused by the
use of components and accessories that have not been supplied
by us.
a. Before attaching implement to three-point linkage, move system
lever into a position whereby unintentional raising or lowering is
ruled out!
d. Alterations and the use of auxiliary parts that are not permitted
by the manufacturer render all liability invalid.
c. Danger of injury through crushing and cutting exists in the threepoint linkage area!
b. Danger of injury exists when coupling implement to tractor!
d. Do not stand between tractor and implement when using threepoint linkage external operation!
e. Attach and detach drive shaft only when motor has stopped.
3.) Protection devices
f. When transporting with raised implement, secure operating lever
against lowering!
All protection devices must remain on the machine and be
maintained in proper condition. Punctual replacement of worn
and damaged covers is essential.
g. Before leaving tractor, lower attached implement to the ground
and remove ignition key!
h. Nobody is to stand between tractor and implement without tractor
being secured against rolling using parking brake and/or wheel
chocks!
4.) Before starting work
a. Before commencing work, the operator must be aware of all
operating devices and functions. The learning of these is too late
after having already commenced operation!
i. For all maintenance, service and modification work, turn driving
motor off and remove universal drive.
b. The vehicle is to be tested for traffic and operating safety before
each operation.
9.) Cleaning the machine
Do not use high-pressure washers for the cleaning of bearing- and
hydraulic parts.
5.) Asbestos
- Certain sub-supplied components of the
vehicle may contain asbestos due to technical
reasons. Observe the warning on spare
parts.
9400_GB-Anhang A_Sicherheit
-A1-
DRIVESHAFT
Supplement - B
Matching driveshaft to tractor
Rules for working
To determine the actual length required, hold the two
halves of the driveshaft side by side.
Never exceed the maximum p. t. o. speed when using
the implement.
- When the p.t.o. is switched off, the implement hitched
up may not stop at once.
Do not go close to the implement until all motion has
stopped; only then may work be done on it.
- When the implement ist parked, either remove the
driveshaft and store it, or secure it with a chain. Do
not use retaining chain (H) for this.
Procedure for cutting to length
- To determine length required, set implement in closest
working position (L2) to tractor, hold driveshaft halves
side by side and mark off.
Wide-angle joint:
Maximum angle of deflection when working/stationary:
70°
Standard joint :
Maximum angle of deflection when stationary: 90°
Maximum angle of deflection when working: 35°
Important!
• Note the maximum operating length (L1)
- Try to attain the greatest possible shaft overlap (min. 1/2 X)!
• Shorten inside and outside tube guard by the same
amount.
• Fit torque limiter (2) of drive shaft to implement end of
driveshaft!
Maintenance
Replace worn-out covers/guards at
once.
• Always check that drive shaft locks are securely
engaged before starting work.
Retaining chain
- Use chain to prevent tube guard from rotating.
Take care that chain does not impede driveshaft
pivoting.
- Lubricate with a brand-name grease before starting
work and every 8 hours worked.
- Before any extended period of non-use, clean and
lubricate driveshaft.
For winter working, grease the tube guards, to avoid
them freezing together.
8h
0700_ GB-Gelenkwelle_BA-ALLG
- B1 -
FETT
GB
Important!
Only use the indicated or accompanying drive
shaft, otherwise
the right to claim
under guarantee
for any possible
damage does not
exist.
DRIVESHAFT
Supplement - B
How a cam type cut out safety clutch works
This overload clutch switches the torque transmitted to
zero if overloaded. To revert to normal operation, stop the
p.t.o. drive briefly.
The clutch reengages at a speed below 200 rpm.
IMPORTANT!
Re-engaging is also possible by decreasing the
p.t.o. r.p.m.
TAKE NOTE!
The overload clutch on the driveshaft is not a “Full up”
indicator. It is purely a torque limiter designed to protect
the implement against damage.
Driving the right way will avoid triggering the clutch too
often, and thus causing unnecessary wear on it and the
implement.
Lubricating interval: 500 hrs (Special lubricant)
Important for driveshafts with friction clutch
Torque is limited with overloading and brief torque peaks
and evenly transferred during slipping.
K90,K90/4,K94/1
Prior to initial operation and after long periods out of use,
check friction clutch for proprer function.
L
a.) Measure dimension „L“ at compression spring of
K90, K90/4 and K94/1 or at set screw of K92Eand
K92/4E.
b.) Loosen screws to release the pressure on the
friction disk.
Slip the clutch.
c.) Tighten set screws to dimension „L“.
Clutch is ready for use.
K92E,K92/4E
L
0700_ GB-Gelenkwelle_BA-ALLG
- B1 -
GB
Gear oils according to operating instructions
- however at least once a year.
-
Getriebeöl gemäß Betriebsanleitung - je doch
mindestens 1 x jährlich wechseln.
-
verlangte kwaliteitskenmerken
caratteristica richiesta di
qualità
de performance demandé
required quality level niveau
gefordertes Qualitätsmerkmal
Betriebsstoff-Kennzahl
Lubricant indicator
Code du lubrifiant
Numero caratteristico del
lubrificante
Smeermiddelen code
Siehe Anmerkungen
*
**
***
huile transmission SAE 90 ou
SAE 85 W-140, niveau API-GL 4 ou
API-GL 5
IV (IV)
FETT
grasso al litio
graisse au lithium
lithium grease
Li-Fett (DIN 51 502, KP 2K)
-D1-
gear oil, SAE 90 resp. SAE 85 W-140
according to API-GL 4 or API-GL 5
Getriebeöl SAE 90 bzw. SAE 85 W-140
gemäß API-GL 4 oder API-GL 5
III
retirer le bouchon de vidange, laisser
l'huile s'écouler et les dispositions
nécessaires au recyclage de celle-ci
Avant l’arrêt et hiver: vidanger et graisser
les éléments sensibles avec un produit type
"IV" pour les protégés de la rouille (consulter
tableau au verso).
-
Pour l’huile transmission consulter le cahier
d’entretien - Vidanger les boîtiers et carters
au moins une fois par an.
Sur le tableau de graissage, on trouve un code
(p.ex."III") se référant à un lubrifiant donné.
En consultant ce code on peut facilement
déterminer la spécification demandée du
lubrifiant. La liste des sociétés pétrolières
ne prétend pas d’être complète.
Togliere il tappo di scarico a vite dell’olio; far scolare
l’olio e eliminare l’olio come previsto dalla legge antiinquinamento ambientale.
grasso fluido per riduttori e
motoroduttori
graisse transmission
transmission grease
Getriebefließfett
(DIN 51 502:GOH
V
grasso a base di saponi complessi
graisse complexe
complex grease
Aftapplug er uit nemen, de olie
aftappen en milieuvriendelijk
verwerken.
oilio per cambi e differenziali
SAE 90 o SAE 85 W-140 secondo specifiche API-GL 5
huile transmission SA 90 ou
SAE 85 W-140, niveau API
GL 5
gear oil SAE 90 resp. SAE 85
W-140 according to API-GL 5
Getriebeöl SAE 90 bzw. 85
W-140 gemäß API-GL 5
VII
Voor het buiten gebruik stellen (winterperiode) de olie-wissel uitvoeren
en alle vetnippel smeerpunten
doorsmeren. Blanke metaaldelen
(koppelingen enz.) met een product
uit groep "Iv" van de navolgende tabel
tegen corrosie beschermen.
-
Olie in aandrijvingen volgens de gebruiksaanwijzing verwisselen - echter
tenminste 1 x jaarlijks.
Komplexfett (DIN 51 502: KP 1R)
VI
Effettuare il cambio dell'olio ed ingrassare tutte le parti
che richiedono una lubrificazione a grasso prima del fermo
invernale della macchina. proteggere dalla ruggine tutte le
parti metalliche esterne scoperte con un prodotto a norma
di "Iv" della tabella riportata sul retro della pagina.
-
Motori a quattro tempi: bisogna effettuare il cambio
dell'olio ogni 100 ore di funzionamento e quello dell'olio
per cambi come stabilito nel manuale delle istruzioni per
l'uso (tuttavia, almeno 1 volta all'anno).
prestaties en levensduur van de
machines zijn afhankelijk van
een zorgvuldig onderhoud en het
gebruik van goede smeermiddelen.
Dit schema vergemakkelijkt de
goede keuze van de juiste smeermiddelen.
Smeermiddelen
L'efficienza e la durata della macchina dipendono
dall'accuratezza della sua manutenzione e dall'impiego
dei lubrificanti adatti. Il nostro elenco dei lubrificanti Vi
agevola nella scelta del lubrificante giusto.Il lubrificante
da utilizzarsi di volta in volta è simbolizzato nello schema
di lubrificazione da un numero caratter-istico (per es.
"III"). In base al "numero caratteristico del lubrificante"
si possono stabilire sia la caratteristica di qualità che il
progetto corrispondente delle compagnie petrolifere.
L'elenco delle compagnie petrolifere non ha pretese di
completezza.
NL
Le bon fonctionnement et la longévité des
machines dépendent d’un entretien soigneux
et de l’utilisation de bons lubrifiants. Notre
liste facilite le choix correct des lubrifiants.
Lubrificanti
Uitgave 1997
I
Edizione 1997
Lubrifiants
Édition 1997
F
oilo motore SAE 30 secondo
specifiche API CD/SF
olio per cambi e differenziali SAE 90
o SAE 85W-140 secondo specifiche
API-GL 4 o API-GL 5
huile moteur SAE 30 niveau
API CD/SF
motor oil SAE 30
according to API CD/SF
Motorenöl SAE 30 gemäß
API CD/SF
HYDRAULIKöL HLP
DIN 51524 Teil 2
ÖL
II
(II)
Before garaging (winter season) an oil change and
greasing of all lubricating points has to be done.
Unprotected, blanc metal parts outside (joints,
etc.) have to be protected against corrosion with
a group "Iv" product as indicated on the reverse
of this page.
I
Vor Stillegung (Winterperiode) Ölwechsel durchführen
und alle Fettschmierstellen abschmieren. Blanke
Metallteile außen (Gelenke, usw.) mit einem Produkt
gemäß “IV” in der umseitigen Tabelle vor Rost
schützen.
Take out oil drain plug, let run out and duly
dispose waste oil.
The applicable lubricants are symbolized (eg.
“III”). According to this lubricant product code
number the specification, quality and brandname
of oil companies may easily be determined.
The listing of the oil companies is not said to
be complete.
Im Schmierplan ist der jeweils ein zu set zen de
Betriebsstoff durch die Betriebsstoffkennzahl (z.B.
“III”) symbolisiert. Anhand von “Betriebsstoffkennzahl”
kann das geforderte Qualitätsmerkmal und das
entsprechende Produkt der Mi ne ra löl fir men
festgestellt werden. Die Liste der Mineralölfirmen
erhebt keinen Anspruch auf Vollständigkeit.
Ölablaßschraube herausnehmen, das Altöl
aus lau fen lassen und ord nungs ge mäß
entsorgen.
The performance and the lifetime of the farm
machines are highly depending on a careful
maintenance and application of correct
lubricants. our schedule enables an easy
selection of selected products.
Lubricants
Leistung und Lebensdauer der Maschine sind
von sorgfältiger Wartung und der Verwendung
g u t e r B e t r i e b s s t o ff e a b h ä n g i g . U n s e re
Betriebsstoffauflistung erleichtert die richtige Auswahl
geeigneter Betriebsstoffe.
GB
Edition 1997
Betriebsstoffe
Ausgabe 1997
D
RENOGEAR SUPER 8090 MC
RENOGEAR HYPOID 85 W-140
RENOGEAR HYPOID 90
VISCO 2000
ENERGOL HD 30
VANELLUS M 30
RX SUPER DIESEL 15W-40
POWERTRANS
MOTORÖL 100 MS SAE 30
MOTORÖL 104 CM 15W-40 AUSTROTRAC 15W-30
PERFORMANCE 2 B SAE 30 8000
TOURS 20W-30 TRACTORELF ST
15W-30
PLUS MOTORÖL 20W-30 UNIFARM GEAROIL GP 80W-90 GEAROIL
15W-30
GP 85W-140
PONTONIC N 85W-90 PONTONIC
MP 85W-90 85W-140
SUPER UNIVERSAL OIL
SUPER 2000 CD-MC
SUPER 2000 CD
HD SUPERIOR 20 W-30
HD SUPERIOR SAE 30
SUPER EVVAROL HD/B SAE 30
UNIVERSAL TRACTOROIL SUPER
DELTA PLUS SAE 30
SUPER UNIVERSAL OIL
TITAN HYDRAMOT 1O3O MC
TITAN UNIVERSAL HD
MULTI 2030
2000 TC
HYDRAMOT 15W-30 HYDRAMOT
1030 MC
HD 20W-20
DELVAC 1230
SUPER UNIVERSAL 15W-30
EXTRA HD 30
SUPER HD 20 W-30
AGROMA 15W-30
ROTELLA X 30
RIMULA X 15W-40
RUBIA H 30
MULTAGRI TM 15W-20
SUPER HPO 30
STOU 15W-30
SUPER TRAC FE 10W-30
ALL FLEET PLUS 15W-40
HD PLUS SAE 30
MULTI-REKORD 15W-40
PRIMANOL
REKORD 30
HYDRAULIKÖL HLP 32/46/68
SUPER 2000 CD-MC *
HYDRA HYDR. FLUID * HYDRAULIKÖL MC 530 ** PLANTOHYD
40N ***
ENERGOL SHF 32/46/68
HYSPIN AWS 32/46/68 HYSPIN
AWH 32/46
HLP 32/46/68
HLP-M M32/M46
NUTO H 32/46/68
NUTO HP 32/46/68
ENAK HLP 32/46/68
ENAK MULTI 46/68
HYDRAN 32/46/68
RENOLIN 1025 MC ***
TITAN HYDRAMOT 1030 MC **
RENOGEAR HYDRA *
PLANTOHYD 40N ***
HYDRAULIKÖL HLP/32/46/68
HYDRAMOT 1030 MC * HYDRAULIKÖL 520 **
PLANTOHYD 40N ***
DTE 22/24/25
DTE 13/15
RENOLIN B 10/15/20 RENOLIN B
32 HVI/46HVI
TELLUS S32/S 46/S68 TELLUS
T 32/T46
AZOLLA ZS 32, 46, 68 EQUIVIS ZS
32, 46, 68
ULTRAMAX HLP 32/46/68 SUPER
TRAC FE 10W-30* ULTRAMAX
HVLP 32 **
ULTRAPLANT 40 ***
ANDARIN 32/46/68
WIOLAN HS (HG) 32/46/68
WIOLAN HVG 46 **
WIOLAN HR 32/46 ***
HYDROLFLUID *
ESSO
EVVA
FUCHS
GENOL
RHG
SHELL
TOTAL
VALVOLINE
WINTERSHALL
VEEDOL
MOBIL
FINA
ELF
ELAN
CASTROL
BP
BAYWA
OLNA 32/46/68
HYDRELF 46/68
MOTOROIL HD 30
MULTIGRADE HDC 15W-40 TRACTAVIA HF SUPER 10 W-30
AVILUB RL 32/46
AVILUB VG 32/46
AVIA
HYPOID-GETRIEBEÖL
80W-90, 85W-140
MEHRZWECKGETRIEBEÖL
80W-90
MULTIGRADE SAE 80/90 MULTIGEAR B 90
MULTIGEAR C SAE 85W-140
HP GEAR OIL 90
oder 85W-140
TRANS GEAR OIL 80W-90
TOTAL EP 85W-90
TOTAL EP B 85W-90
SPIRAX 90 EP
SPIRAX HD 90
SPIRAX HD 85/140
MEHRZWECKGETRIEBEÖlSAE90
HYPOID EW 90
MOBILUBE GX 90
MOBILUBE HD 90
MOBILUBE HD 85W-140
GETRIEBEÖL MP 90
HYPOID EW 90
HYPOID 85W-140
HYPOID GA 90
HYPOID GB 90
GETRIEBEÖL MP 85W-90 GETRIEBEÖL B 85W-90 GETRIEBEÖL C
85W-90
TRANSELF TYP B 90 85W-140
TRANSELF EP 90 85W-140
EPX 80W-90
HYPOY C 80W-140
GEAR OIL 90 EP
HYPOGEAR 90 EP
SUPER 8090 MC
HYPOID 80W-90
HYPOID 85W-140
GETRIEBEÖL MZ 90 M MULTIHYP
85W-140
GETRIEBEÖL EP 90 GETRIEBEÖL
HYP 85W-90
ARAL
AGIP
VITAM GF 32/46/68
VITAM HF 32/46
III
SUPER KOWAL 30 MULTI TURBORAL SUPER TRAKTORAL 15W-30
ÖL
II
ROTRA HY 80W-90/85W-140
ROTRA MP 80W-90/85W-140
(II)
MOTOROIL HD 30
SIGMA MULTI 15W-40
SUPER TRACTOROIL UNIVERS.
15W-30
I
OSO 32/46/68
ARNICA 22/46
Firma
IV(IV)
HYPOID GB 90
EVVA CA 300
WIOLUB LFP 2
-D2-
MULTIPURPOSE
MULTILUBE EP 2
VAL-PLEX EP 2
PLANTOGEL 2 N
MULTIS EP 2
MEHRZWECKFETT
RENOLIT MP
DURAPLEX EP
RETINAX A
ALVANIA EP 2
MOBILGREASE MP
WIOLUB GFW
-
RENOLIT LZR 000
DEGRALUB ZSA 000
MULTIS EP 200
WIOLUB AFK 2
DURAPLEX EP 1
MULTIS HT 1
-
HYPOID-GETRIEBEÖL
80W-90, 85W-140
MULTIGEAR B 90
MULTI C SAE 85W-140
HP GEAR OIL 90
oder 85W-140
TOTAL EP B 85W-90
SPIRAX HD 90
SPIRAX HD 85W-140
HYPOID EW 90
RENOPLEX EP 1
SPEZ. GETRIEBEFETT H SIMMNIA AEROSHELL GREASE 22 DOLIUM
GREASE O
GREASE R
RENOSOD GFO 35
MOBILUBE HD 90
MOBILUBE HD 85W-140
HYPOID EW 90
HYPOID 85W-140
RENOGEAR SUPER 8090 MC
RENOGEAR HYPOID 85W-140
RENOGEAR HYPOID 90
MOBILPLEX 47
GETRIEBEFLIESSFETT
PLANTOGEL 00N
MOBILUX EP 004
RENOPLEX EP 1
RENOSOD GFO 35
DURAPLEX EP 00
PLANTOGEL 00N
RENOLIT MP
RENOLIT FLM 2
RENOLIT ADHESIV 2
PLANTOGEL 2 N
MEHRZWECKFETT
SPEZIALFETT GLM
PLANTOGEL 2 N
RENOPLEX EP 1
NATRAN 00
PONTONIC MP 85W-140
GEAR OIL GX 80W-90
GEAR OIL GX 85W-140
NEBULA EP 1
GP GREASE
MARSON AX 2
TRANSELF TYP B 90 85W-140
TRANSELF TYP BLS 80 W-90
GETRIEBEÖL B 85W-90 GETRIEBEÖL C 85W-140
EPX 80W-90
HYPOY C 80W-140
HYPOGEAR 90 EP
HYPOGEAR 85W-140 EP
HYPOID 85W-140
MULTIMOTIVE 1
-
CASTROLGREASE LMX
OLEX PR 9142
RENOPLEX EP 1
GETRIEBEÖL HYP 90 EP MULTIHYP
85W-140 EP
AVIALUB SPEZIALFETT LD
ROTRA MP 80W-90
ROTRA MP 85W-140
VII
GETRIEBEÖL HYP 90
-
VI
ARALUB FK 2
MARSON EP L 2
GETRIEBEFETT MO 370
FIBRAX EP 370
MULTI PURPOSE GREASE H
HOCHDRUCKFETT LT/SC 280
GA O EP
POLY G O
EPEXA 2
ROLEXA 2
MULTI 2
RHENOX 34
IMPERVIA MMO
CASTROLGREASE LM
LORENA 46
LITORA 27
FLIESSFETT NO
ENERGREASE HTO
GETRIEBEFLIESSFETT NLGI 0
RENOLIT DURAPLEX EP 00
PLANTOGEL 00N
AVIA GETRIEBEFLIESSFETT
ARALUB FDP 00
GR SLL
GR LFO
V
ENERGREASE LS-EP 2
MULTI FETT 2
SPEZIALFETT FLM
PLANTOGEL 2 N
AVIA MEHRZWECKFETT
AVIA ABSCHMIERFETT
ARALUB HL 2
GR MU 2
FETT
Bei Verbundarbeit mit
Naßbremsen-schleppern ist die internationale Spezifikation J 20
A erforderlich
** Hydrauliköle
HLP-(D) + HV
*** Hydrauliköle auf Pflanzenölbasis HLP + HV
Biologisch abbaubar,
deshalb besonders
umweltfreundlich
*
ANMERKUNGEN
DE
FR
GB
NL
ES
PO
IT
(ab Baujahr 2003)
(à partir de l’année de construction 2003)
(from 2003 model)
(vanaf bouwjaar 2003)
(desde el año 2003 de construcción)
(a partir do modelo de 2003)
(a partire dall’anno di costruzione 2003)
0300-D MA-VITASEM-A _873
ANBAUSATZ FÜR VITASEM A
D
PÖTTINGER LION 300, 3001, 3000, 3001, 4000, 4001
A-31
DE
FR
GB
NL
ES
PO
IT
(ab Baujahr 2003)
(à partir de l’année de construction 2003)
(from 2003 model)
(vanaf bouwjaar 2003)
(desde el año 2003 de construcción)
(a partir do modelo de 2003)
(a partire dall’anno di costruzione 2003)
0300-D MA-VITASEM-A _873
ANBAUSATZ FÜR VITASEM A
D
PÖTTINGER LION 300, 3001, 3000, 3001, 4000, 4001
A-32
DE
FR
GB
NL
ES
PO
IT
(ab Baujahr 2003)
(à partir de l’année de construction 2003)
(from 2003 model)
(vanaf bouwjaar 2003)
(desde el año 2003 de construcción)
(a partir do modelo de 2003)
(a partire dall’anno di costruzione 2003)
0300-D MA-VITASEM-A _873
ANBAUSATZ FÜR VITASEM A
D
PÖTTINGER LION 300, 3001, 3000, 3001, 4000, 4001
A-33
DE
FR
GB
NL
ES
PO
IT
(ab Baujahr 2003)
(à partir de l’année de construction 2003)
(from 2003 model)
(vanaf bouwjaar 2003)
(desde el año 2003 de construcción)
(a partir do modelo de 2003)
(a partire dall’anno di costruzione 2003)
0300-D MA-VITASEM-A _873
ANBAUSATZ FÜR VITASEM A
D
PÖTTINGER LION 300, 3001, 3000, 3001, 4000, 4001
A-34
DE
FR
GB
NL
ES
CZ
HU
PL
(bis Baujahr 2002)
(Jusqu’à l’année de construction 2002)
(up to 2002 model)
(tot bouwjaar 2002)
(hasta el año 2002 de construcción)
(do roku v˝roby 2002)
(a 2002-es gyártási évig)
(od roku produkcji 2003)
0300-D MA-VITASEM-A _873
ANBAUSATZ FÜR
VITASEM A
A-35
D
IMPORTANT! ADDITIONAL INFORMATION
GB
Combination of tractor and mounted implement
The mounting of implements on the front or rear three point linkage shall not result in exceeding the maximum permissible weight,
the permissible axle loads and the tyre load carrying capacities ot the tractor. The front axle of the tractor must always to be loaded
with at least 20 % of the unladen weight of the tractor.
Make sure before buying an implement that these conditions are fulfilled by carrying out the following calculations or by weighing the
tractor/implement combination.
Determination of the total weight, the axle loads, the tyre load carrying capacity and the necessary
minimum ballasting
For the calculation you need the following data:
TL [kg]
unladen weight of tractor
1
TV [kg]
front axle load of unladen tractor
1
TH [kg]
rear axle load of unladen tractor
1
b [m]
GH [kg]
combined weight of rear mounted implement/rear
2
ballast
GV [kg]
combined weight of front mounted implement/front 2
ballast
a [m]
distance from centre of gravity for
combined front mounted implement/front
ballast to front axle centre
2
3
Tractor wheelbase
1
3
c [m]
distance from rear axle centre to centre
of lower link balls
1
3
d [m]
distance from centre of lower link balls
to centre of gravity for combined rear
mounted implement/rear ballast
2
1 see instruction handbook of the tractor
2 see price list and/or instruction handbook of the implement
3 to be measured
Consideration of rear mounted implement and front/rear combinations
1. CALCULATION OF MINIMUM BALLASTING AT THE FRONT GV min
Record the calculated minimum ballasting which is needed at the front of the tractor into the table.
Front mounted implement
2. CALCULATION OF THE MINIMUM GH min
Record the calculated minimum ballasting which is needed at the rear of the tractor into the table.
0000-GB ZUSINFO / BA-EL ALLG.
- Z.36 -
IMPORTANT! ADDITIONAL INFORMATION
GB
3. CALCULATION OF THE REAL FRONT AXLE LOAD TV tat
(If with the front mounted implement (GV) the required minimum front ballasting (GV min) cannot be reached, the weight of the front mounted
implement has to be increased to the weight of the minimum ballasting at the front!)
Record the calculated real front axle load and the permissible front axle load of the tractor into the table.
4. CALCULATION OF THE REAL TOTAL WEIGHT Gtat
(If with the rear mounted implement (GH) the required minimum rear ballasting (GH min) cannot be reached, the weight of the rear mounted
implements has to be increased to at least the weight of the minimum ballasting at the rear!)
Record the calculated real and the permissible total weight given in the instruction handbook for the tractor into the table.
5. CALCULATION OF THE REAL REAR AXLE LOAD TH tat
Record the calculated real and the permissible rear axle load given in the instruction handbook for the tractor into the table.
6. TYRE LOAD CARRYING CAPACITY
Record double the value (two tyres) of the permissible load carrying capacity into the table (see for instance documentation provided by the
tyre manufacturer).
Table
Real value according to
calculation
Permissible value
according to
instruction handbook
Double permissible tyre
load carrying capacity (two
tyres)
Minimum ballasting
front/rear
Total weight
Front axle load
Rear axle load
The minimum ballasting has to be attached to the tractor either in form of a mounted implement or
ballasting weight!
The calculated values must be less or equal (<) the permissible values!
0000-GB ZUSINFO / BA-EL ALLG.
- Z.37 -
GB
Appendix 1
EC Certificate of Conformity
conforming to EEC Directions 98/37/EG
ALOIS PÖTTINGER Maschinenfabrik Gesellschaft m.b.H.
We ______________________________________________________________________
(name of supplier)
A-4710 Grieskirchen; Industriegelände 1
__________________________________________________________________________________
(full address of company - where this concerns authorized agents within the Common Market, also state the company
name and manufacturer)
declare in sole responsibility, that the product
Rotary Harrow
LION 250, LION 251
Type 872
LION 300, LION 301
Type 8731
LION 3000, LION 3001 Type 873
LION 4000, LION 4001 Type 874
__________________________________________________________________________
(make, model)
to which this certificate applies, conforms to the basic safety and health requirements of
EEC Directions 98/37,
(if applicable)
and to the other relevant EEC Directions.
__________________________________________________________________________
(title and/or number and date of issue of the other EEC Directions)
(if applicable)
To effect correct application of the safety and health requirements stated in the EEC Directions,
the following standards and/or technical specifications were consulted:
__________________________________________________________________________
0600 GB-EG Konformitätserklärung
(title and/or number and date of issue of standards and/or specifications)
Grieskirchen, 08.10.2007
____________________________
(Place and date of issue)
pa. Ing. W. Schremmer
Entwicklungsleitung
____________________________________
(Name and job function of authorized person)
Im Zuge der technischen Weiterentwicklung
arbeitet die PÖTTINGER Ges.m.b.H ständig
an der Verbesserung ihrer Produkte.
Änderungen ge gen über den Ab bil dun gen und
Beschreibungen dieser Betriebsanleitung müssen wir
uns darum vorbehalten, ein Anspruch auf Änderungen
an bereits ausgelieferten Maschinen kann daraus nicht
abgeleitet werden.
Technische Angaben, Maße und Gewichte sind
unverbindlich. Irrtümer vorbehalten.
Nachdruck oder Übersetzung, auch auszugsweise,
nur mit schriftlicher Genehmigung der
ALOIS PÖTTINGER
Maschinenfabrik Gesellschaft m.b.H.
A-4710 Grieskirchen.
Alle Rechte nach dem Gesetz des Urheberrecht
vorbehalten.
La société PÖTTINGER Ges.m.b.H améliore
constamment ses produits grâce au progrès
technique.
C'est pourquoi nous nous réser-vons le droit de
modifier descriptions et illustrations de cette notice
d'utilisation, sans qu'on en puisse faire découler un
droit à modifications sur des machines déjà livrées.
Caractéristiques techniques, dimensions et poids sont
sans engagement. Des erreurs sont possibles.
Copie ou traduction, même d'extraits, seulement avec
la permission écrite de
ALoIS PÖTTINGER
Maschinenfabrik Gesellschaft m.b.H.
A-4710 Grieskirchen.
Tous droits réservés selon la réglementation des
droits d'auteurs.
Following the policy of the PÖTTINGER Ges.
m.b.H to improve their products as technical
developments continue, PÖTTINGER
reserve the right to make alterations which must not
necessarily correspond to text and illustrations contained in this publication, and without incurring obligation
to alter any machines previously delivered.
Technical data, dimensions and weights are given as an
indication only. Responsibility for errors or omissions
not accepted.
Reproduction or translation of this publication, in
whole or part, is not permitted without the written
consent of the
ALoIS PÖTTINGER
Maschinenfabrik Gesellschaft m.b.H.
A-4710 Grieskirchen.
All rights under the provision of the copyright Act
are reserved.
PÖTTINGER Ges.m.b.H werkt permanent
aan de verbetering van hun producten in het
kader van hun technische ontwikkelingen.
Daarom moeten wij ons veranderingen van
de afbeeldingen en beschrijvingen van deze
gebruiksaanwijzing voorbehouden, zonder dat daaruit
een aanspraak op veranderingen van reeds geieverde
machines kan worden afgeleid.
Technische gegevens, maten en gewichten zijn niet
bindend. Vergissingen voorbehouden.
Nadruk of vertaling, ook gedeeltelijk, slechts met
schriftelijke toestemming van
ALoIS PÖTTINGER
Maschinenfabrik Gesellschaft m.b.H.
A-4710 Grieskirchen.
Alle rechten naar de wet over het auteursrecht voorbehouden.
La empresa PÖTTINGER Ges.m.b.H se
esfuerza contínuamente en la mejora
constante de sus productos, adaptándolos
a la evolución técnica. Por ello nos vemos obligados
a reservarnos todos los derechos de cualquier
modificación de los productos con relación a las
ilustraciones y a los textos del presente manual, sin
que por ello pueda ser deducido derecho alguno a la
modificación de máquinas ya suministradas.
Los datos técnicos, las medidas y los pesos se
entienden sin compromiso alguno.
La reproducción o la traducción del presente manual
de instrucciones, aunque sea tan solo parcial, requiere
de la autorización por escrito de
ALoIS PÖTTINGER
Maschinenfabrik Gesellschaft m.b.H.
A-4710 Grieskirchen.
Todos los derechos están protegidos por la ley de la
propiedad industrial.
La PÖTTINGER Ges.m.b.H è costantemente
al lavoro per migliorare i suoi prodotti
mantenendoli aggiornati rispetto allo
sviluppo della tecnica.
Per questo motivo siamo costretti a riservarci la facoltà
di apportare eventuali modifiche alle illustrazioni e alle
descrizioni di queste istruzioni per l’uso. Allo stesso
tempo ciò non comporta il diritto di fare apportare
modifiche a macchine già fornite.
I dati tecnici, le misure e i pesi non sono impegnativi.
Non rispondiamo di eventuali errori. Ristampa o
traduzione, anche solo parziale, solo dietro consenso
scritto della
ALoIS PÖTTINGER
Maschinenfabrik Gesellschaft m.b.H.
A-4710 Grieskirchen.
Ci riserviamo tutti i diritti previsti dalla legge sul diritto
d’autore.
D
NL
A empresa PÖTTINGER Ges.m.b.H
esforçase continuamente por melhorar os
seus produtos, adaptando-os à evolução
técnica.
Por este motivo, reservamonos o direito de modificar
as figuras e as descrições constantes no presente
manual, sem incorrer na obrigação de modificar
máquinas já fornecidas.
As características técnicas, as dimensões e os pesos
não são vinculativos.
A reprodução ou a tradução do presente manual de
instruções, seja ela total ou parcial, requer a autorização
por escrito da
ALoIS PÖTTINGER
Maschinenfabrik Gesellschaft m.b.H.
A-4710 Grieskirchen
Todos os direitos estão protegidos pela lei da propriedade intelectual.
P
F
E
GB
I
ALOIS PÖTTINGER
Maschinenfabrik Gesellschaft m.b.H
A-4710 Grieskirchen
Telefon: 0043 (0) 72 48 600-0
Telefax: 0043 (0) 72 48 600-2511
e-Mail: [email protected]
Internet: http://www.poettinger.at
GEBR. PÖTTINGER GMBH
Stützpunkt Nord
Steinbecker Strasse 15
D-49509 Recke
Telefon: (0 54 53) 91 14 - 0
Telefax: (0 54 53) 91 14 - 14
PÖTTINGER France
129 b, la Chapelle
F-68650 Le Bonhomme
Tél.: 03.89.47.28.30
Fax: 03.89.47.28.39
GEBR. PÖTTINGER GMBH
Servicezentrum
Spöttinger-Straße 24
Postfach 1561
D-86 899 LANDSBERG / LECH
Telefon:
Ersatzteildienst: 0 81 91 / 92 99 - 166 od. 169
Kundendienst: 0 81 91 / 92 99 - 130 od. 231
Telefax: 0 81 91 / 59 656