Catalogue Produits

Transcription

Catalogue Produits

WWW.GILLESBOUVARD.COM
Catalogue Produits
2
www.gillesbouvard.com
FIBRE
OPTIQUE
GB for Network est spécialisé dans les réseaux fibre optique et
interfaces réseau
Distributeur pour des marques Optocore et BroaMan :
OPTOCORE®, fabricant d’interfaces réseau audio, data, vidéo,
ethernet, intercom sur un réseau en boucle optique permettant le
transfert de données par fibre optique pour une qualité sans égal,
sans limite de longueur.
BROAMAN®, fabricant d’interfaces vidéo full HD 3G, data,
ethernet, intercom sur un réseau en boucle optique permettant le
transfert de données par fibre optique pour une qualité sans égal,
sans limite de longueur.
N’hésitez pas à nous contacter pour découvrir les univers de ces
marques de talent et assister à nos démonstrations produits !
3
Fibre optic network for professional
audio, data and video
ies
ADI Ser
New M
F i x e d
4
in s tallati on
·
B r oad c as t
·
l ive
Pe rFo rmance
COMPANY PROFILE
For the past 20 years OptOcOre has been
the most prominent provider of time
critical, redundant, audio, video and
control infrastructure.
OptOcOre introduced at
the German Science Fair
in 1993
OptOcOre networks are used in a wide
variety of environments, including opening
and closing ceremonies of the world‘s
most prominent events, as well as an
alternative to copper infrastructures in OB vans, stadiums, studios and
theatres. OptOcOre systems scale down to point to point portable
stageboxes with mixing console integration.
OptOcOre is based on the open AeS3 and AeS10 (MADI) standards
providing transport, routing, format conversion as well as distribution
of audio, video and control data with full management and diagnostic
capabilities.
Development and manufacturing
All technologies and products are developed and maintained by an in
house r&D team. the r&D department strives for efficient and elegant
design of hardware, software and firmware. Be that in use of the planets
resources, energy efficiency or coding.
the first OptOcOre devices by
Brunke electronics in 1996
2002
trade-mark
the registered
Optocore® is
GmbH
opal audio vertrieb
Engerstrasse 47
D-33824 Werther
236/237
Fon ++49-(0)5203238
Fax ++49-(0)5203-
of
.de
www.optocore
.de
info@optocore
All assembly, testing and burn-in of our products is performed at
our manufacturing base in Munich, Germany.
Education and training
The most important advantages of the
LX4 system
can be illustrated in the following points:
Optocore solves tasks previously
believed to be almost impossible:
OptOcOre has a deep commitment to training and education.
OptOcOre offers a series of training seminars to educate the industry
about OptOcOre network design and operation, digital audio and an
introduction to use of fibre optics cables as an interconnect. OptOcOre
certification training (Oct) seminars are hosted regularly around the
world.
◆ Highest audio quality due to new
24-Bit AD-converters.
◆ Exceptional dynamic range of up to
146dB
due to low-noise, switchable microphone
preamplification.
◆ Economical, professional signal-splitting
direct
at the input unit (double split on stagebox).
LX4B - F.O.H.-system
◆ The combination of numerous different
tasks
(audio, video, DMX, computer data...).
◆ Reduction of transmission problems
(quality and quantity).
◆ 48 Output channels, 8 channel multipin,
selectable
line level 0dB, -10dB post mic-preamp
◆ 16 Input channels, 8 channel multipin,
selectable line level 0dB, 10dB
◆ Retention of flexibility due to patching
possibility.
◆ Long distances and maximum robustness
(military standard, water-proof cable and
connectors).
◆ 10MHz band-width Video Out
◆ 2x RS485 interface
(also usable for DMX, AES/EBU Out)
◆ Standard long-life Class 1 Laser fibre-optic
modules
(up to ~1,5km, on request single mode
~10km).
◆ 1x RS232/USB hardware interface
◆ Optocon: mobile fibre optic connector
(MIL spec)
◆ Optolink: optical connection for extension
◆ Full microphone pre-amplification with
phantompower and gain matching at the stagebox.
◆ Uniform, disturbance-free quality
to all split-outputs.
◆ 2x PSU (redundant power supply)
◆ Rational grouping via 8-channel multicores
at the outputs (extendable and adaptable).
◆ 5-stage level-indicator with bank-wise
operation at the front panel.
◆ 3 U Enclosure
◆ 2x24 character fluorescent display
for extended
menu functions (software updateable).
◆ Complete software updates via RS232
or USB.
◆ Additional monitoring function via
headphones.
◆ High-efficiency, switch-mode, redundant
powersupply and energy-saving components.
m
LX4A - Stage-syste
OPTOCORE Certification Training (OCT) is eligible for InfoComm CTS
renewal units.
System Optocore®
Multicore Network
signal transmission
for professional,
has been developed
signals to
numerous different
applications allowing
in the
long distances
transferred over
be digitised and
quality.
highest possible
The Optical Digital
tasks previously
Optocore solves
almost impossible:
believed to be
optimal
applications, where broadcast
the mobile
◆ in outside broadcast
is required but
transfer quality placed at a considerable distance
be
unit has had to
from the event;
several stages
applications involvingto be overcome;
◆ in mobile PA
distances need
or where extreme
where the transmission
◆ in studio installations,
be optimised;
quality needs to
more
where constantly
are being introduced;
◆ in building engineering,
routing
signal
complex tasks for
where the
installation costs
signal
◆ by reducing
numerous varying
transmission of
is necessary;
classifications
and distribution
complex network.
◆ when developing
and programmability
systems with control-
Timeline:
1993 OptOcOre technology patent
1996 release of the first OptOcOre products
including excellent
channels, each
phantom power,
◆ 48 XLR Input
mic-preamp and
Optocore-style
0dB to +50dB
selectable gain:
channel
channels, selectable
◆ 16 XLR Return
level 0dB, -10dB
multipin, line level
Split, 8 channel
◆ 2x 48 channel
mic-preamp
(max. +8dBu) post
switchable to display
◆ 8-channel level-meter,
channels
each bank of 8
earReturn 1-16 with
Input 1-48 and
phantom-power
◆ Channel select
gain-level and
phone jack to control
7
Out)
◆ 2x RS485 interface
DMX, AES/EBU
(also usable for
Video In
◆ 10MHz band-width
hardware interface
◆ 1x RS232/USB
(MIL spec)
fibre optic connector
◆ Optocon: mobile
extension
connection for
◆ Optolink: optical
power supply)
◆ 2x PSU (redundant
◆ 6 U Enclosure
5
2000 OptOcOre becomes a network with digital connectivity
2002 OptOcOre implemented by DiGico
2003 OptOcOre GmbH incorporated
OptOcOre product Brochure 2002
2008 the OptOcOre network triples in size
2009 Introduction of the r-series hardware platform
2012 the capacity of OptOcOre is doubled to 2Gb
OPTOCORE is, and will be, an independent
company that embraces open standards.
2013/2014
5
FEATuRES
The high bandwidth infrastructure
OPTOCORE Features
OptOcOre is a high bandwidth network designed specifically to meet
the requirements of professional audio and video. OptOcOre offers a
unique solution that is flexible and scalable, yet intuitive and easy to
use. OptOcOre is a modern replacement for traditional copper cable
plants and manual patching.
•De-centralizedaudio,videoanddatarouting
•Highcapacity
•Controltransport
•Lowlatency
•Redundancy
•Integrationoptions
Open platform – the Autobahn for your audio,
video and control
•Opticalisolation
•Lowcostofownership
OptOcOre is an open platform. Designed to transparently transport and
route industry standard signal formats such as MADI, AeS/eBU as well
as ethernet, DMX, MIDI, rS-485/422 and cAN BUS.
•Futureproofhardwareandsoftware
•Scalability
•Losslesslongdistancetransmission
OptOcOre converges and simplifies any cabining and patching
infrastructure.
The OPTOCORE fiber network
is capable of:
• Upto1024audioinputchannels
• UNLIMITEDnumberofoutputs
• 32routableSerialChannels
• CompositeVideotransport
• FastEthernettransportandSwitching
• Upto24devicenetworks,expandableto
216 devices using SANe
SANE is capable of:
• Upto64audioinputandoutputchannels
• FastEthernettransportandSwitching
Topology Options
Point to Point Links
OPTOCORE
Device
Daisy Chains
OPTOCORE
Device
OPTOCORE
Device
Star Topology
OPTOCORE
Device
OPTOCORE
Device
OPTOCORE
Device
OPTOCORE
Device
OPTOCORE
Device
OPTOCORE Technical Partners
OPTOCORE
Device
Ring Topology
OPTOCORE
Device
OPTOCORE
Device
OPTOCORE
Device
6
OPTOCORE
Device
OPTOCORE
Device
OPTOCORE
Device
OPTOCORE
Device
OPTOCORE
Device
ANALOg CONNECTIvITY
The X6R and V3R platform allows customizable analog, digital and
network connectivity utilizing state of the art circuitry for the highest
sonic performance and ultimate reliability.
X6R – 16 Channel Converter
the devices are populated at the time of manufacturing with analog,
digital and network options.
V3R – 8 Channel Converter
Network and Digital Connectivity Options:
FX – The OPTOCORE fibre network module
allows the converter to be used as a part of a 24 device OptOcOre
redundant ring topology network.
4Serialports-Sync-2LANports-2SANE/LANports
TP – The SANE Cat5 module
allows the converter to be used as a stand alone converter or
expansion device for OptOcOre FX devices.
16AES3I/O-WordClockI/O-1LANport-2SANE/LANports
FX – OPTOCORE Fibre option
TP – SANE Cat5 option
Converters
include AeS3 ports for conversation to and from the analog inputs
and/or outputs.
16AES3I/O-WordClockI/O-1LANport
Converter option
the X6r 16 channel converter can be populated with two 8 channel
input or output modules for up to 16 inputs, 16 outputs or a mix of
8 inputs and outputs.
V3R Analog Connectivity – Euroblock
TheV3R8channelconvertercanbepopulatedwithasingle8channel
input or output module.
Analog Devices:
Connectivity Options:
X6R-16MI – 16 Mic Inputs
X6R-DualMI – 8 Dual-Mic Inputs
X6R-16LI–16LineInputs
X6R-16LO –16LineOutputs
X6R-8MI/8LO –8MicInputs,8LineOutputs
X6R-8MI/8LI –8MicInputs,8LineInputs
X6R-8LI/8LO –8LineInputs,8LineOutputs
MI – Microphone Inputs - 8 channel microphone preamp.
High quality 1dB analog gain step preamplifiers.
DualMI – Dual Microphone Inputs - 8 channel dual microphone
preamp, for a total of 16 network inputs. each input is fed to two
microphone preamps that can be independently routed and controlled
on the network.
LI – Line Level Inputs -8channelLineLevelInputmodule.
V3R-8MI – 8 Mic Inputs
V3R-8LI –8LineInputs
V3R-8LO–8LineOutputs
the above connectivity combinations are available
with FX, TP network modules and as stand alone Converters.
X6R-FX-8AE/8MI – 8 AeS I/O, 8 Mic Inputs
X6R-FX-8AE/8LI –8AESI/O,8LineInputs
X6R-FX-8AE/8LO –8AESI/O,8LineOutputs
LO – Line Level Outputs -8channelLineLevelOutputmodule.
AE – AES3 I/O - 16 channel AeS3 switchable I/O module.
Available for FX devices and can be ordered in conjunction with analog
input and output modules.
RedundantPowerSupply,DCinputandXLRpanelsareavailableas
options.
7
INTERCOM CONNECTIvITY
TheX6R-INTERCOMandV3R-INTERCOMplatformallowscustomizable
intercom, control and network connectivity, utilizing state of the art
analog and digital circuitry for ultimate reliability.
X6R-INTERCOM – 8 Intercom Ports with control
the devices are populated at the time of manufacturing with intercom,
control and network options.
V3R-INTERCOM – 4 Intercom Ports with control
Network and Digital Connectivity Options:
allows the converter to be used as a part of a 24 device OptOcOre
TP – The SANE Cat5 module
allows the converter to be used as a stand alone converter or
expansion device for OptOcOre FX devices.
16AES3I/O-WordClockI/O-1LANport-2SANE/LANports
TP – SANE Cat5 option
the X6r-INtercOM can be populated with two 4 input/output
intercom modules for up to 8 inputs/outputs, with an intercom specific
control option.
X6R-FX-INTERCOM-IC422/485 – Four Wire Matrix Ports
TheV3R-INTERCOMcanbepopulatedwitha4input/outputintercom
module with an intercom specific control option.
V3R-FX-INTERCOM-IC444 – Line Level I/O, GPIO, DC
Intercom Devices:
X6R-INTERCOM-IC422 – 8 Four Wire clear com Matrix ports
X6R-INTERCOM-IC485 – 8 Four Wire rtS Matrix ports
X6R-INTERCOM-IC444–8LineLevelI/OandGPIO
IC422 – ClearCom Four Wire Matrix Ports with Serial Control
4FourWireClearComMatrixPortswithLineLevelandRS422Serial
Inputs and Outputs for clearcom key panels, matrixes and interfaces.
V3R-INTERCOM-IC422 – 4 Four Wire clear com Matrix ports
V3R-INTERCOM-IC485 – 4 Four Wire rtS Matrix ports
V3R-INTERCOM-IC444 –4LineLevelI/OandGPIO
the above combinations are available with FX and TP network modules.
IC485 – RTS Four Wire Intercom Ports with Serial Control
4FourWireRTSMatrixPortswithLineLevelandRS485SerialInputs
and Outputs for rtS key panels, matrixes and interfaces.
IC444 – Line Level Inputs and Outputs, GPIO and DC output
4LineLevelinputsandoutputswithopticallyisolatedGeneralPurpose
Inputs and relay switched General purpose Outputs.
Auxiliary Dc outputs to power external circuits.
SDI – 3G/HD/SD-SDI Inputs and Outputs
ABroaManversionoftheV3R-FX-INTERCOMcanbesuppliedwithup
to 8 SDI I/O and WDM multiplexers.
www.broaman.com
AeS3 based intercom systems can utilize OptOcOre AeS3 ports.
redundant power Supply and Dc input are available as options.
8
MADI CONNECTIvITY
the M8-FX, M12-FX and M20-FX MADI Switches allow for the use of
high capacity, open standard MADI and Fast ethernet on twisted pair
cabling in standalone applications as well as a part of an OptOcOre
network using high bandwidth optical uplink ports.
M20-FX – 18 Twisted Pair MADI / Ethernet Ports
the devices are designed and built utilizing state of the art digital
circuitry for ultimate reliability and operational flexibility.
M12-FX – 10 Twisted Pair MADI / Ethernet Ports
Network Connectivity Options:
allows the device to be used as a part of a 24 device OptOcOre
Twisted Pair MADI:
twisted pair MADI is a derivative of the AeS10 MADI standard and
introduces the use of standard, low cost, cAt5 cabling in addition to
coaxial and Optical connectivity.
M20-FX –Twisted Pair MADI/LAN Ports
M12-FX – Coaxial MADI Ports
recognizing the need for more affordable options for MADI
interconnectivity, the implementation utilizes commonly available
components to create a 64 channel audio interface at a price point
viable for low channel capacity applications .
twisted pair MADI not only fulfills all professional requirements for
simplicity sound quality, low latency, low jitter, but can optionally have
the added benefit of Fast ethernet on the same cable for device
control.
M12-FX – Twisted Pair MADI/LAN Ports
M20-FX-CAT/ M12-FX-CAT
16 / 8 twisted pair 64 channel MADI ports routable using the device’s
1024 x 1024 / 512 x 512 channel router or to a network connected to
the high capacity optical uplink ports.
each 16 / 8 twisted pair MADI ports additionally features a Fast
ethernet network switch port.
M12-FX-OPT/BNC
4 Optical / 4 coaxial 64 channel MADI ports routable using the device’s
512 x 512 channel router or to a network connected to the high
capacity optical uplink ports.
M12-FX-OPT/ M8-FX-OPT
8 / 4 Optical 64 channel MADI ports routable using the device’s 512 x
512 channel router or to a network connected to the high capacity
optical uplink ports.
M12-FX-BNC/ M8-FX-BNC
8 / 4 coaxial 64 channel MADI ports routable using the device’s 512 x
512 channel router or to a network connected to the high capacity
optical uplink ports.
redundant power Supplies supplied as standard.
Dc input optionally available.
9
MADI CONNECTIvITY
MADI Series Devices:
M20-FX-CAT–16TwistedPairMADI/LANPorts
M12-FX-CAT –8TwistedPairMADI/LANPorts
M12-FX-OPT – 8 Optical MADI ports
M8-FX-OPT – 4 Optical MADI ports
M12-FX-BNC – 8 coaxial MADI ports
M8-FX-BNC – 4 coaxial MADI ports
M12-FX-OPT/BNC – 4 Optical and 4 coaxial MADI ports
OptOcOre FXdevicesareadditionallyequippedwith2SANEportsthatcanbeconfiguredtobeusedasTwistedPairMADI/LANports.
the DD2Fr-FX and DD4Mr-FX allow transparent, high capacity, open
standard MADI connectivity to and from OptOcOre networks.
DD2FR-FX – 2 Optical MADI Ports with analog video
DD4MR-FX – 2 Coaxial MADI Ports with analog video
DD2FR-FX
2 Optical 64 channel MADI ports.
CompositeVideoInputandOutput.
DD2FR-FX – 2 Optical MADI Ports with analog video
DD4MR-FX
2 coaxial 64 channel MADI ports.
CompositeVideoInputandOutput.
redundant power Supplies supplied as standard.
Dc input optionally available.
DD4MR-FX – 2 Coaxial MADI Ports with analog video
MADI Devices:
DD2FR-FX –2OpticalMADIPortswithCompositeVideoI/O
DD4MR-FX –2CoaxialMADIPortswithCompositeVideoI/O
10
AES/EBu CONNECTIvITY
the DD32r and X6r allow customizable AeS3 digital and network
connectivity.
DD32R – 64 Channel AES3 device
the devices are populated at the time of manufacturing with connectivity
and network options.
X6R – 16 Channel AES3 device
DD32R-FX
32 AeS3 pairs. Switchable as I/O in blocks of 4 pairs.
CompositeVideoInputandOutput
DD32R-FX – AES Connectivity – 25DSub
X6R-FX-16AE
X6R-FX-8AE/8MI or 8LI or 8 LO
8channelMicrophoneinput,LineLevelinput/outputmodulethatcan
be used in place of 4 AeS3 pairs.
X6R-FX – AES Connectivity – Euroblock
X6R-FX-16AE/SRC
4 AeS3 inputs and 4 AeS3 outputs with sample rate converter.
AES/EBU Devices:
DD32R-FX –32AES3pairs,CompositeVideoI/O
X6R-FX-16AE – 8 AeS3 pairs
X6R-FX-8AE/8MI – 8 AeS pairs, 8 Mic Inputs
X6R-FX-8AE/8LI –8AESI/O,8LineInputs
X6R-FX-8AE/8LO–8AESI/O,8LineOutputs
X6R-FX-16AE/SRC – 4 AeS3 input with Sample rate
converters and output pairs
AES3 ports on an OPTOCORE TP device
All TP devices are equipped with 16 AeS3 pairs assignable to the
network, switchable as inputs or outputs in blocks of 4 pairs.
A redundant power supply (standard on DD32r-FX) and Dc inputs are
available as options.
11
INTERFACE CARDS
The Y3R-TP Yamaha card with SANe allows cAt5 connection to an
OptOcOre FX or tp device.
Y3R-TP – 16/16 Yamaha card
the Y3r-tp card is capable of 16 inputs and outputs. Multiple cards can
be daisy chained from a 64 channel input / 64 channel output SANe port
on an OptOcOre FX device or used in a SANe network.
the Y3r-tp card is capable of transporting and converting the Yamaha
HA remote protocol and Fast ethernet.
The YG2 and YS2 Yamaha cards allow a redundant fibre connection of
a Yamaha mixing console console to a 1Gbit OptOcOre network.
YG2 – 64/64 Yamaha master card
the YG2 card is capable of 64 inputs and outputs and connection to
multiple YS2 slave cards.
A YG2 card is capable of transporting and converting the Yamaha HA
remote protocol and Fast ethernet.
YS2 – 16/16 Yamaha slave card
REPEATERS
The DD8RP is a four channel protocol Independent repeater for
standard SFp fibre transceivers.
DD8RP – Protocol Independent Repeater
the device can be used to convert between single and multimode fibre,
to transverse between WDM colors/wavelengths or to amplify optical
signals.
The BroaMan product range offers a wide variety of solutions for 3G/
HD/SD-SDI professional video signals.
BroaMan Repeat 48 – 3G/HD/SD-SDI, MADI Repeaters
the BroaMan repeat 48 is a modular coaxial-optical converter for 3G/
HD/SD-SDI and MADI that can optionally be equipped with WDM
multiplexers and auxiliary ports for OptOcOre.
Learn more at:
www.broaman.com
12
OPTOCORE CONTROL SOFTwARE
the software enables complete control over a
OptOcOre network. It enables access to the
patching matrix of all devices in the entire
networks and let you remotely control and
monitor connected devices, such as converter
modules (gain setting, phantom power, input
and output level readings).
OPTOCORE Control
the software allows the configuration of and
access to the complete network, audio, data
and video MAtrIX, the naming and gainsetting
of all inputs, the configuration of the word
clock settings, the provision of phantom power
for all mic inputs, the modification of options,
the storage and recall of the configuration setup to/from pc hard disk, as well as the realtime level display of the individual channels.
RS485 and Video Settings
rS485 and video patch is confirmed by the
local setting window, locally or via the network.
Specials
the OptOcOre control protocol can be used by
interested manufacturers or customers to
control OptOcOre devices directly from
hardware other than a computer (mixing desks,
media controller, control boxes, etc.). this is
currently being implemented by various
manufacturers, including DiGico®, Soundcraft,
LAWO,SolidStateLogicandYamaha®,allowing
gain/phantom control of analog OptOcOre
devices(LX4,X6,X6R,V3R)directlyfromtheir
digital consoles.
OPTOCORE Control Software – Input Tab
Supervising the Network
WorkinginON-LINEmode,itispossibletohave
the complete network under control, the
software advises the system manager after
every significant event, such as input clipping
fiber/CAT5 disconnection, RS232/USB/LAN
connection status. A log window will
automatically pop up on event, if desired.
Input-output, Matrix and Patch
Any input of the system can be routed to any
output by means of the Matrix tab. One input
can be routed to more than one output.
Local Settings
Output Tab
Patching Matrix
Log Window
13
SELECTED LIST OF OPTOCORE uSERS
Events and Tours:
2012 Summer Olympic Games, Opening and
ClosingCeremonies–London,UK
2010 Winter Olympic Games, Opening and
ClosingCeremonies–Vancouver,BC,Canada
closing ceremonies – Beijing, china
closing ceremonies – Athens, Greece
20th World Youth Day – cologne, Germany
32ndAmerica’sCup–Valencia,Spain
53rdAnnualGrammyAwards–LosAngeles,
california, USA
Atp tennis Masters Series – USA
Barbra Streisand european tour
Billy Joel & elton John “Face 2 Face” tour
commonwealth Games – Delhi, India
european Song contest – Belgrade, Serbia
GlastonburyFestival–Pilton,Somerset,UK
Green Day “21st century Breakdown” tour
LeonaLewis“TheLabyrinth”Tour
New Years eve in times Square – New York, USA
robbie Williams “close encounters” tour
royal Horse Gala – Qatar
take that “progress” tour
LeMansGrandPrix–France2012DivyaJyoti
Jagriti Sansthan, India
Kuwait50thConstitutionDay–Kuwait
coldplay tour "Mylo Xyloto" – europe
punk'd – USA
carnival – Brazil
Australian Open – Australia
X-Games – France
Permanent Installations:
America Gardens theatre at epcot,
Walt Disney World – Orlando, Florida, USA
Bastille Opera – paris, France
cirque du Soleil, MGM city center –
LasVegas,Nevada,USA
Deltion college – Zwolle, the Netherlands
Düsseldorfer Schauspielhaus – Germany
First christian church – Akron, Ohio, USA
HardRockLive,HardRockHotel&Casino–
Biloxi, Mississippi, USA
Henan Arts center – Zhengzhou, Henan, china
HongKongCulturalCenter–China
KaufmanConcertHallatThe92nd.St.Y–
New York, New York, USA
KingsPlace–London,UK
KölnerPhilharmonie–Cologne,Germany
KulturpalastDresden–Dresden,Germany
New Zealand parliament – Wellington,
New Zealand
NorwegianEPICCruiseLine–Norway,France,
UK,USA
Olympic Stadium – Berlin, Germany
pittsburgh Hockey Arena, consol energy center
– pittsburgh, pennsylvania, USA
14
porto coliseum – porto, portugal
Seacoast Grace church – cypress, california, USA
Swedish theater Helsinki – Finland
ThePhoenixHall–Kyoto,Japan
Würzburg Main-Franconia theatre – Würzburg,
Germany
Wroclaw Opera House – Wroclaw, poland
HochschulefürMusikKarlsruhe–Germany
tokyo theatre Orb – Japan
Oostende theatre – Belgium
teatr rozrywki – poland
EdinburghInternationalConferenceCentre–UK
Luxor–USA
emirates palace – Dubai
chan center – canada
Aarhus theatre – Denmark
Broadcast:
ArenaTV–UK
AustrianBroadcasting(ORF),OBVanand
recordingVan–Austria
British Broadcasting corporation (BBc)
“TypeB”van–UK
Berlin-Brandenburg Broadcast (rBB) – Germany
canadian Broadcasting corporation (cBc) radio
OBVan–Canada
Canal9,ValenciaTelevision(RTVV)–Spain
DRSRadiorecordingVan–Switzerland
Hessian Broadcasting (Hr) – Germany
HunanTV–Changsha,China
JiaxiangTV–China
Media Burst – portugal
MediasetOBVan27–Italy
NBc Studios – USA
polish radio – poland
rai 3 Studios – Italy
Saarland Broadcasting (Sr) – Gemany
Southwest Broadcasting (SWr) – Germany
teleBaern – Switzerland
the Audio truck Inc. – canada
VRTS3radiovan(Flemishradio)–Belgium
ZhejiangTelevision(ZJTV)OBVan–China
SVT,Sweden
Media city – UK
NRK – Norway
radio Deejay – Italy
Israel Broadcast – Israel
HSe 24 – Germany
TheVoiceofGermany – Germany
OPTOCORE GMBH
GB4D
10 Chemin Pierre Plaine
38460 CREMIEU
Tél. : +33 (0)4 37 06 26 26
15
Product Overview
Professional digital Video, Audio
and Data infrastructure with routing,
format conversion and management
16
COmPany PrOfile
COMPANY PROFILE
Broaman (Broadcast manufactur GmbH) has been set up by
the founders of German optical fibre giants, OPTOCOre, in
order to apply their world-leading network technology to the
broadcast and video post production industries.
Broaman manufactures network devices necessary for the
infrastructure of broadcast applications such as Studios,
OB-Vans or Sport events. The devices transport all types of
broadcast signals, including digital and analogue video, digital
and analogue audio, digital and analogue intercom and all
forms of control data on copper and fibre infrastructure. if
required, this includes format conversions, like from copper to
fibre or from analogue to digital, as well as routing of signals
based on automatic or manual rules, up/downscalers, frame
synchronisers and many more features.
as a service company, we build devices and deliver solutions
to customer requirements. To implement this, we use a pool
of the best available technologies, and mainly those based on
open standards: These include DiVine (Digital Video network);
3G-SDi (SmPTe); Camera links; WDm (Wavelength Division
multiplexing) for Video; OPTOCOre; Sane; maDi; iP based
systems for audio; analogue, aeS and iP based systems
for intercom; ieee802 (ethernet); serial data; DmX; miDi;
Can for control. We strongly believe in the usage of open
standards when possible for maximum future proofing.
Devices are constructed from various base frames – such
as route66, route33, repeat66, repeat33 for flexible
applications, and repeat48 and repeat48CWDm as
standalone 3G/HD/SD-SDi and maDi to fibre converters
– with or without WDm multiplexers. inside, numerous
modules can be inserted, to individually tailor the devices
and provide solutions for specific projects where there is a
requirement to send, receive, multiplex and demultiplex as
well as convert professional video signals, including analogue,
SD, HD and 3G-SDi, with/without audio, intercom and data.
The self-contained, energy-efficient devices are fast fit and
can also be interfaced to audio and data network systems,
such as OPTOCOre, Sane (Synchronous audio network
plus ethernet), maDi and ethernet, to provide a complete
transmission solution.
ABOUT DIVINE
DiVine stands for Digital Video network and launches a
new quality in professional video, audio and data transport.
DiVine produces building blocks for digital video like BnC to
fibre modules, video router, scalers, reclockers, embedders,
WDm modules, fibre transceivers, Sync generators
designed especially for multiple, high quality video channels
infrastructure.
Broaman uses the standards DiVine, 3G-SDi, Camera link,
HDmi, DVi to transport video through the devices.
www.di-vi.net
ABOUT OPTOCORE
OPTOCOre is the reference in audio networking, proven since
16 years in thousands of broadcast applications. internally
based on open aeS standards aeS3 and aeS10, it enables
digital audio infrastructure with routing, format conversion,
and distribution of audio while maintaining the full aeS/eBU
standards used in all digital audio and Video devices of today.
OPTOCOre blocks include also all sorts of data transmission
and allows redundancy, management and diagnosis.
Broaman uses the standards OPTOCOre, aeS3, aeS10, iP
based audio, ethernet and rS422 to create the audio part of
our devices. www.optocore.net
17
OUTSTanDinG DiVine feaTUreS
SD/HD/3G-SDI enabled
SDI BNC to fibre conversion
DiVine integrates the latest high bandwidth video
standards, where all products are fully compatible with
SD/HD/3G video streams. DiVine allows customers to
use standard BnC SDi interface as inputs and outputs.
infrastructure is then fibre based for superior quality and
reduced weight, space and cost.
The whole range of DiVine products offers SDi to fibre and
fibre to SDi conversion. Converters can work as standalone
units and can be used as point-to-point solutions or can
be integrated in a more complex routing and repeating
platform.
Up to 80 channels on a single fibre
DiVine enables the transport of up to 80 video channels on
a single fibre optic cable, utilising the Coarse and Dense
Wavelength-Division multiplexing (CWDm and DWDm).
Complete DiViNe, OPTOCORE and SANE integration
Through use of DiVine, OPTOCOre, Sane and other
standards, Broaman creates integrated video, audio and
data infrastructures. One cable can be used to carry all
necessary signals – video, audio, ethernet, rS485/422,
DmX and many more.
Routing platform
Broaman offers a routing platform with three different
options – automatic routing based on device iD, routing
controlled by an external platform (for example VSm),
routing in the Control Software.
18
Customised systems
each Broaman project is consulted with our support and
development team which enables the customer to design a
system that perfectly matches their requirements.
Module based solution
The product range is very flexible, each product can be
equipped with the number of fibre and SDi interfaces as
required by the customer. This modular approach allows
the customer to tailor each system component according to
their needs.
TeCHniCal OVerVieW
OPTICAL MULTIPLEXING
DiViNe APPLICATIONS
DiVine utilises CWDm and/or DWDm technology providing
transmission of professional audio, video and data over one
fibre optic cable.
DiVine supports SD/HD/3G-SDi video, digital audio format
aeS/eBU, maDi, as well as analogue video and audio.
DiVine also provides a transport of serial data rS485/422,
DmX, Can BUS and ethernet.
Traditional video transport system
TECHNOLOGY INTEGRATION
DiVine is a video platform offering complete and seamless
integration of the DiVine fibre based Video system, fibre
DiVine converter solution
based OPTOCOre audio and data platform and Cat5 based
audio and data Sane technology.
DiViNe
SD/HD/3G Video
OPTOCORE
Audio + Data
over fibre
SANE
Audio + Data
over Cat5
DiVine router solution
19
rePeaT48 SySTem
Repeat48 provides a high channel count point-to-point SD/HD/3G-SDI video solution. interfaces can work as simple electrical to
optical or optical to electrical converters. Optical channels can also be multiplexed and demultiplexed with CWDm module. There are
two frames available, each configured by the manufacturer to fulfil the customer’s requirements – repeat48 and repeat48CWDm.
Video channel status
information
REPEAT48
Features:
• upto24SDIportsforSD/
HD/3G video configured as:
- input with adaptive eQ
- input with reclocker
- Output
- Output with reclocker
• upto24simplexLCfibre
transmitters or receivers,
respectively to the SDi port
• E-O-Econversion
• customisedI/Oconfigurations
Power supply
status information
• dualPowersupply
• perfectasastandalone
converter
Dimensions:
• 1RU(rackunit)
483 mm (19”) width x
44 mm (1,73”) height x
200 mm (7,87”) depth
• Weight:dependenton
hardware configuration
Up to 24 x SDI to fibre and/or fibre
to SDI converters
REPEAT48CWDM
Features:
• upto18SDIportsportsforSD/
HD/3G video configured as:
- Output
• upto8simplexLCfibre
• built-inCWDMorDWDM
module
• E-O-Einternalconversion
• fibremultiplexing/demultiplexing
AC power 1 & 2
• customisedI/Oconfigurations
• dualPowersupply
• idealforatransportof
multiple video channels on
the common fibre cable
Dimensions:
• 1RU(rackunit)
483 mm (19”) width x
44 mm (1,73”) height x
200 mm (7,87”) depth
STanDalOne WDm mODUle
The passive WDm module can be equipped with different CWDm or DWDm modules, providing multiplexing and demultiplexing for
the largest and most demanding systems.
WDM
Features:
• upto160simplexLCports
• allowstobuilt-inanynumberofallavailableCWDM/DWDM
modules
• providesexternalconnectivitytoCWDM/DWDMmodules
• nopowersupply–passivedevice
• suitableasMUX/DEMUXextensionforRoute66and/orRepeat48
systems
20
Dimensions:
• 2RU(rackunit):483mm(19”)widthx88mm(3,5”)height
x 200 mm (7,87”) depth
• Weight:dependentonhardwareconfiguration
rOUTe66 SySTem
Route66 is the DiViNe system approach and is the name of the whole range of routers that BroaMan manufactures.
Based on four main boards the user can define how many SDi and fibre interfaces are needed and how the device should perform –
as a repeater or as a router. The route66 system product range consists of four devices route66 (up to 66 channel router), route33
(up to 33 channel router), repeat66 (up to 66 channel repeater), repeat33 (up to 33 channel repeater). each of the units can be fitted
in two types of housings – 1rU or 2rU, depending on the number of ports which should be available for user-defined connections.
each unit is individually configured to meet the most demanding requirements.
Word Clock
Sample Rate
Up to 24 x SD/HD/3G-SDI
Optional
OPTOCORE board
information
Up to 36 LC fibre ports
Unit status
information
Features:
• upto24BNC-SDIportsfor
SD/HD/3G video configured as:
- Output
- Switchable i/O
• upto20duplexLCfibreports
• upto36simplexLCfibreports
• optionalbuilt-inCWDMor
DWDm module
• optionalBlackBurstsync
module
Optional
OPTOCORE board
• optionalOPTOCOREmodule:
- 2 duplex lC fibre ports for
OPTOCOre with built-in
redundancy
- 2 Sane with ethernet ports
- 2 lan ports
- rS485/422 port
- Word Clock Output
- external Word Clock input
• DualPowersupply
Dimensions:
• 2RU(rackunit)483mm(19”)
width x 88 mm (3,5”) height
x 200 mm (7,87”) depth
information
Up to 10 x SD/HD/3G-SDI
AC power 1 & 2
Up to 20 duplex
LC fibre ports
2RU HOUSING
Word Clock
Sample Rate
Unit status
information
AC power 1 & 2
Up to 8 LC
fibre ports
1RU HOUSING
Features:
• upto10BNC-SDIportsfor
SD/HD/3G video configured as:
- Output
- Switchable i/O
• upto8simplexLCfibreports
• optionalbuilt-inCWDMor
DWDm module
• optionalBlackBurstsync
module
• optionalOPTOCOREframe:
- 2 duplex lC fibre ports for
OPTOCOre with built-in
redundancy
- 2 Sane with ethernet ports
- 2 lan ports
- rS485/422 port
- Word Clock Output
- external Word Clock input
• DualPowersupply
Dimensions:
• 1RU(rackunit),483mm(19”)
width x 44 mm (1,73”) height
x 200 mm (7,87”) depth
ROUTE66
ROUTE33
Features:
• Routingupto66SD/HD/3Gvideochannels
• E-O-Econversion
• DifferentI/Oconfigurationspossible
• OptionalMUX/DEMUX
• Idealforlargeroutingsystems
Features:
• Routingupto33SD/HD/3Gvideochannels
• E-O-Econversion
• Perfectforsmallerroutingsystems
REPEAT66
REPEAT33
Features:
• Repeatingupto66SD/HD/3Gvideochannels
• E-O-Econversion
• CanbeusedasabigStageBoxconnectedtotherouter
Features:
• Repeatingupto33SD/HD/3Gvideochannels
• E-O-Econvertion
• CanbeusedasasmallStageBoxconnectedtotherouter
21
neTWOrK eXamPle
Sveriges Television
Project –
Video infrastructure
comprised of 4 video
systems
SD/HD/3G-SDI,
coaxial cable
SD/HD/3G-SDI,
fibre cable
CWDM COM,
duplex fibre cable
SD/HD/3G-SDI,
mobile fibre cable
DiViNe
StageBox
Camera StageBox
9 x REMOTE
9 x REMOTE
CAMERA
CAMERA
STAGEBOXES
STAGEBOXES
Fibre to SDI
Fiber to SDI
Converters
Converters
Wallbox #1
4 x SDI Out
1 x BlackBurst
DiViNe
Camera StageBox
.
. x9
.
Wallbox #9
DiViNe
Camera
Router
Routing
via VSM
2 x 10 SDI In
18 fibre Out
Equipment
Room
x 18
4 x SDI Out
The first and most
CWDM COM,
1 x BlackBurst
mobile duplex fibre cable
powerful system is
the Video router with
Wallbox #1
DiViNe
DiViNe
DiViNe
8 StageBoxes, which
DiViNe
Video StageBox
Video StageBox
Video StageBox
ID 3
ID 2
ID 1
can be connected in
x 20 Miranda
ID 11-16
.
4 x SDI Out
4 x SDI Out
4 x SDI Out
1 x SDI IN
1 x SDI IN
1 x SDI IN
.
x
32
32 different locations.
RS485, Ethernet
RS485, Ethernet
RS485, Ethernet
8 x 32
Video
.
automatic
The routing system is
x5
Matrix
5 x REMOTE
DiViNe
DiViNe
Video Router
5 x REMOTE
Video StageBox
Video StageBox
VIDEO
VIDEO
with CWDM
based on the route66
ID 4
ID 5
STAGEBOXES
STAGEBOXES
4 x SDI Out
4 x SDI Out
Wallbox #32
Automatic ID1 x SDI IN
1 x SDI IN
2rU frames, four
Automatic
IDbased
RS485, Ethernet
RS485, Ethernet
basedrouting
routing
of the devices are
configured as SDi in to
DiViNe
fibre converters with
Camera StageBox
Wallbox #1
DiViNe
Studio
2 x SDI Out
4 x REMOTE
routing capabilities,
Ceiling
4 x REMOTE
1
x
BlackBurst
CEILING
.
x8
CEILING
Router
Floor
STAGEBOXES
. x 10
STAGEBOXES
one fibre to SDi OUT
.
Fibre to SDI
DiViNe
Fiber to SDI
Routing
converter with routing
Converters
Converters
Camera StageBox
via VSM
Wallbox #10
capabilities, OPTOCOre
2 x SDI Out
1 x BlackBurst
router and two CWDm
modules which provide
multiplexing to 32 different locations (wallboxes). routing
distribution of approximately 200 SDi channels. Due to the
is automatic, based on the iD – it doesn’t matter to which
modular design each device provides a different number
wallbox a StageBox is connected, always the same 4 inputs
of i/O interfaces which adds a great flexibility to the overall
and 1 return channel from/to the router are assigned to the
system.
same StageBox.
The second system consists of two Camera routers
and one Ceiling router with SDi in and fibre transmitters,
providing additional outputs on 15 remote StageBoxes. in
this case routing is made by the user with the use of VSm
software provided by lSB company.
The third system consists of one light Car router and
one StageBox. as in the Video router system the light
Car router provides automatic routing and video is routed
together with the OPTOCOre stream on the same route66
2rU interface. Connection between the light Car router
and the StageBox is possible in five different locations with
the use of a 4-core fibre cable.
The fourth system is comprised of numerous repeat48
devices which enable the conversion and fibre-based
automatic routing scheme for SVT project
22
BroaMan
Broadcast Manufactur Gmbh
GB4D
10 chemin Pierre Plaine
38460 CREMIEU
Tél. +33 4 37 06 26 26
[email protected]
23
LOCALISATION
Localisation
24
SIÈGE SOCIAL ET ADMINISTRATIF : 10 chemin
Pierre Plaine • 38460 Crémieu • France
AGENCE ET DÉPÔT : 57 rue de Belle eau • ZI Les
Landiers Nord • 73000 Chambéry • France
Autoroute A43 sortie 14
LOCALISATION
Contacts :
Responsable commerciale
Diane Hivert
+33 (0)6 21 67 85 21
04 37 06 26 26
[email protected]
Chef produit
Gilles Bouvard
+33 (0)6 07 45 73 35
04 37 06 26 26
[email protected]
[email protected]
25
LE RESEAU GB
26
NOTES
27
WWW.GILLESBOUVARD.COM
SIÈGE SOCIAL
ET ADMINISTRATIF :
10 chemin Pierre Plaine
38460 Cremieu • France
[email protected]
CONTACTS :
GILLES BOUVARD
+33 (0)6.07.45.73.35
[email protected]
DIANE HIVERT
+33.(0)6.21.67.85.21
[email protected]
GB4D S.A.R.L. CAPITAL 15 000 EUROS • RCS 520 490 376
TVA FR60 520 490 376 • APE 9002 Z
GILLES BOUVARD EST ADHÉRENT AU SYNPASE
LABEL DES PRESTATAIRES DU SPECTACLE VIVANT N°638

Catalogue Produits

Transcription

Similar documents

Flyer - Indu-Sol

A nossa participação em concursos públicos da União Europeia

SUN uk 01-09.qxp:SUN

technical specifications

110805-Team Ibis (2).

IMTRAN CQ QUAD DVB-ASI MODULES

ASANTE CHARTERS (BERTH 75, Ports O call village, San Pedro

Great UK craft shows

Top 5 tips

WHAT IS A DTS?