A Silicone Bracelet with Macramé Cord and Jewellery Chain

A Silicone
Bracelet with
Macramé Cord
and Jewellery
Chain
01
Inspiration: 12987
03
02
For the silicone bracelet you
will need three pieces of
macramé cord, each
measuring 130cm and a piece
of jewellery chain of approx.
27 or 28 chain sections.
Arrange the macramé cord
3-fold and place it underneath
the silicone bracelet. Now
feed one end of the 3-fold
cord up through the first chain
section and over the silicone
bracelet.
From the chain section, feed
the cords over the bracelet.
Continue this pattern until the
end of the bracelet is reached.
A Silicone Bracelet with
Macramé Cord and Jewellery
Chain
A piece of macramé cord and a jewellery chain
have been tied onto a silicone bracelet with a
built-in fastener.
05
Finish the bracelet by tying
two tight knots. Tie a knot at
both ends of the 3-fold
macramé cord and melt the
ends.
The cords from underneath
should now be placed over
the cords on top, then
underneath the bracelet and
up through the next chain
section.
Cadena de joyería,
A: 6 mm, plateado,
1m
613010
Cadena de joyería,
A: 6 mm, plateado,
SP, 5m
61301
Alicates de punta
plana, l. 27 mm, A:
5 mm, 1ud
13014
Pulseras - surtidos,
20 , sort, 48
61573
Pulseras - surtido,
20 , ass. farver, 48
61572
Pulsera, l. 20 cm,
grosor 4 mm,
negro, 2set
61571
Cuerda poliéster,
grosor 2 mm,
negro, 50m
41578
Cuerda poliéster,
grosor 1 mm,
negro, 50m
41576
04
NB! Try to get the three
macramé cords to lie flat next
to each other whilst plaiting.
This gives the best result.