FLEXIBLE LIGHTING

Transcription

FLEXIBLE LIGHTING

FLEXIBLE LIGHTING
FlexTape 1.5W
110°
91 Lumens
per ft.
(298 per meter)
FlexTape 1.5W
Unique design makes FlexTape the most versatile LED lights on earth. Curve them under frosted glass to create a
stunning display or run them under shelving for continuous illumination. Sold in 20’ (6 m) rolls and cuttable every 2”
(50 mm), the tape features an adhesive backing for easy peel-and-stick installation and the 1.5W/ft. lights produce longlasting, low heat.
Easy-to-use connectors (No soldering!)
Tight reliable connections
Strong 300 LSE 3MTM adhesive backing
Sold by the roll (20’ roll)
Features:
Typical Applications:
Avg. rated life: 50,000 hours*
Store fixtures
White color printed board maximizes light output
Edge lighting
Lower heat, longer life than competing brands
Back lighting
Available in multiple color temperatures and colors
Accent lighting
Dimmable
Cove lighting
Commercial grade - 3 year warranty
Toe kick
*When adhered to a metal substrate
Soffit
Scan for more info
1-800-227-1171 | trescolighting.com
FlexTape 1.5W
Specifications:
Dimensions:
Actual Size
Back
Front
3/8”
(10 mm)
Wattage
1.5W/ft. (4.9W/m)
Lumens
91 per ft. (298 per m)
Efficacy (lm/W)
61
Input Voltage
12VDC
Lamp Life
50,000 Hours
Max Per 60W Power
Supply
40’ (12 m)
Max Continuous Run
20’ (6 m)
Mounting
Surface
Warranty
3 Year
Certifications
Beam Angle
110°
Cuttable
every
2” (50 mm)
Photometric Data
Height
Light Output
1ft
32.70Fc
3ft
3.63Fc
(39.1lx)
(2.7 m L x 2.6 m W)
6ft
.91Fc
17.7ft L x 17.1ft W
(.3 m)
(.9 m)
(1.8 m)
(352lx)
Beam Area
3ft L x 2.8ft W
(.9 m L x .85 m W)
8.9ft L x 8.5ft W
(9.8lx)
(5.4 m L x 5.2 m W)
L-LED-FLXTPE-C Tested
Color Temperature
Warm White
Warm to Neutral
Cool White
Daylight
Side
11/16”
(16 mm)
1/8”
(3 mm)
2700K
3/32”
(2.3 mm)
Warm
(2700K)
3000K
4500K
Neutral
(3500K)
5500K
Cool
(4800K)
IES data verified by Intertek testing lab.
6500K
Daylight
(6500K)
FlexTape 1.5W
Jumper Cord
10 mm
3/8 in.
All product dimensions and specifications are subject to change without prior notice.
1/16 in. Spool of LED FlexTape
1-1/2 mm 6 m (20 ft.)
1/8 in.
3 mm
11/16 in.
17 mm
FlexTape LED
Description
L-LED-FLXTPE-WROLL-1
20’ (6 m) 12VDC 2700K FlexTape Roll
1-1/2 mm
Jumper Cord
1/16 in.
L-LED-FLXTPE-NROLL-1
1-1/2 mm
3/16 in.
5 mm
3/8 in.
10 mm
1/8 in.
3 mm
L-LED-FLXTPE-CROLL-1
Spool of LED
FlexTape Roll
20’ (6 m) 12VDC 4800K
FlexTape
1/16 in.
17 mm
L-LED-FLXTPE-DROLL-1
L-LED-FLXTPE-GROLL-1
20’ (6 m) 12VDC Green FlexTape Roll
L-LED-FLXTPE-RROLL-1
20’ (6 m) 12VDC Red FlexTape Roll
11/16 in.
20 ft. (6m)
1-1/2 mm
11/16”
16 mm
Amp®
Connector
1/8”
3 mm
Mounting Block
Power Supplies
Power Cord
2 m (79 in.)
DC-ELT60-CON
3/32”
Transformer
2.3 mm
11/16”
17 mm
3/32”
2.3 mm
Starter Cord
79 in.
2m
Part #
Amp®
Connector
Maximum continuous run is 20’ (6 m). Maximum per power
supply
is 40’
(12 m).
Spool
of LED
FlexTape
Mounts with adhesive backing. Cuttable every 2” (50 mm). 20
Toft.
be(6m)
used on clean,
smooth surfaces. Pressure must be applied for proper 3MTM tape adhesion.
79 in.
2m
79 in.
2m
Power Cord
L-LED-TPEPKT-2M-1
2 m (79 in.)
79” (2 m) FlexTape Straight Starter
Lead
L-TPEPKT-2IN-1
Cord
5 in. mm) FlexTape Straight Starter Lead
2” (50
(127 mm)
Part #
Description
L-LED-TPEPKT-2M-TEE-1
79” (2 m) FlexTape Tee Starter Lead
20’ (6 m) maximum per side of Tee Starter, 40’ (12 m) overall maximum per Tee Starter. 5/8” (16 mm) hole required.
20 ft. (6 m) max.
Amp®
per side
1/4 in.
6 mm
Connector
Power Cord
2 m (79 in.)
20 ft. (6 m) max.
per side
Cord
5 in.
(127 mm)
Total: 40’ (12 m) maximum combined both sides
Optional Items
1-1/2 in. 25 mm
38 mm 1 in.
Starter Cord
79 in.
5/8"
Back-to-Back 2m
(15.4 mm)
Connector
Mounting
Block
Description
Part #
Total: 12 m (40’)
16.4 ft. (5 m) max.
L-TPELNK-BTB-1
20 ft. (6 m) max.
9/16"
per side
1-1/2 in.
38 mm
on single side
1/2 in.
13 mm
(14.5 mm)
Tee Connector
Part #
1 in.
25 mm L-LED-TPELNK-TEE-1 25 mm
1 in.
1/2 in.
16.4 ft. (5 m) max.
13 mm on single side
Right Angle Connector
1/4 in.
6 mm
13 ft. (4 m) max.
run
1/2 continuous
in.
Jumper
13 mm Cord
13 ft. (4 m) max.
continuous run
1/2 in.
13 mm
1 in.
251/4
mm
in.
6 mm
Jumper Cord
Description
1/4 in.
5/8” (16 mm)
hole required. Cord
6 mm
5 in.
DC-ELT60-CON
Maximum
linear run of Equiline
Tape LED from
one starter cord is 16.4’ (5 m).
1/2 in.
(127 mm)
Transformer
13 mm
Mounting Block
Hexhead Connector
20 ft. (6 m) max.
per side
20’ (6 m) 12VDC Blue FlexTape Roll
FlexTape 1.5W works with all Tresco 12VDC power supplies.
1-1/4 in.
32 mm
1/2 in.
13 mm
3/8 in.
10 mm
For details see Power Supplies in the Components section.
Tee Starter Cord
1-1/4 in.
32 mm
3/8 in.
10 mm
Cord
127 mm
(5 in.)
Hexhead Connector
Starter Cord
L-LED-FLXTPE-BROLL-1
3/32”
2.3 mm
5/16”
Cord
127 mm
7 mm
(5 in.)
3/16”
5 mm
3/16 in.
5 mm
Power
Supplie
s
1/8”
3 mm
3/8 in.
10 mm
1/16#
in.
Part
Cord
5 in.
(127 mm)
1/4
in.
Connector
6Back-to-Back
mm
Description
Tee Link Connector
1/4 in.
6 mm
1/4
in.
6 mm
Part #
Description
L-LED-TPELNK-CON90-1
90° Link Connector
1/4 in.
6 mm
DC-ELT60-CON
Transformer
1/4 in.
6 mm
Part #
Description
L-LED-TPELNK-5-1
3/8
in.
10 mm
2” (5 cm) FlexTape Link Cord
L-LED-TPELNK-15-1
L-LED-TPELNK-25-1
L-LED-TPELNK-60-1
1/4 in.
6 mm
Positive and negative contacts on FlexTape and
FlexConnects should match-up to maintain proper
L-LED-TPELNK-120-1
polarity.
L-LED-TPELNK-180-1
Spool of LED
FlexTape
20 ft. (6m)
Additional optional
items available in the
Components section:
TB-FLEXTAPE15W-1409
Required Items
Controlle
rs
Install Ac
cessorie
s
5 mm
3/16 in.
3/8 in.
1-1/2 mm
1/16 in.
Power
Supplie
s
11/16 in.
FLEXIBLE LIGHTING
FlexTape 3W
120°
149 Lumens
per ft.
(489 per meter)
FlexTape 3W
High Output FlexTape has a low profile that can be used in many discreet locations. Each uses 3W of energy per foot and
comes with an adhesive backing that allows easy mounting on any clean, flat surface. Sold in 16.4’ (5 m) rolls, the tape is
cuttable every 1” (25 mm) and features diodes placed 5/16” (7 mm) apart for greater coverage and illumination.
Sold by the roll (16.4’ roll)
Features:
Store fixtures
White color printed board maximizes light output
Edge lighting
Back lighting
Available in multiple color temperatures and colors
Accent lighting
Dimmable
Cove lighting
Toe kick
Soffit
Scan for more info
FlexTape 3W
Specifications:
Dimensions:
Actual Size
Back
Front
3/8”
(10 mm)
Wattage
3W/ft. (9.8 W/m)
Lumens
149 per ft. (489 per m)
Efficacy (lm/W)
50
Input Voltage
12VDC
Lamp Life
50,000 Hours
Max Per 60W Power
Supply
20’ (6 m)
Max Continuous Run
16.4’ (5 m)
Mounting
Surface
Warranty
3 Year
Certifications
Cuttable
every
1”(25 mm)
Beam Angle
120°
Photometric Data
Height
Light Output
1ft
52.30Fc
3ft
5.81Fc
(62.5lx)
(2.8 m L x 2.8 m W)
6ft
1.45Fc
18.5ft L x 18.4ft W
(.3 m)
(.9 m)
(1.8 m)
(563lx)
Beam Area
3.1ft L x 3.1ft W
(.94 m L x .94 m W)
9.2ft L x 9.2ft W
(15.6lx)
(5.6 m L x 5.6 m W)
LED-FLXTPE-CHO Tested
Color Temperature
Warm White
Warm to Neutral
Cool White
Daylight
Side
5/16”
(7 mm)
2700K
1/8”
(3 mm)
3/32”
(2.3 mm)
Warm
(2700K)
3000K
4500K
Neutral
(3500K)
5500K
Cool
(4800K)
6500K
Daylight
(6500K)
17 mm
11/16 in.
1/8 in.
5 in.
1-1/2 mm
1/16 in.
3/8 in.
Jumper Cord
FlexTape 3W
1/16 in.
1-1/2 mm
10 mm
3/8 in.
Spool of LED FlexTape
6 m (20 ft.)
1/8 in.
3 mm
11/16 in.
17 mm
Required Items
FlexTape LED
3/16 in.
5 mm
1/8”
3 mm
11/16”
16 mm
1/16#
in.
Part
16.4’ (5 m) 12VDC 2700K High Output FlexTape Roll
L-LED-FLXTPE-NRHO-1
3/8 in.
L-LED-FLXTPE-CRHO-1
1/16
17 mm
10 mm
16.4’ (5 m) 12VDCSpool
4800K
Output FlexTape Roll
of LEDHigh
FlexTape
L-LED-FLXTPE-DRHO-1
L-LED-FLXTPE-RRHO-1
16.4’ (5 m) 12VDC Red High Output FlexTape Roll
1/8 in.
3 mm
11/16 in.
3/32”
2.3 mm
5/16”
7 mm
Amp®
Connector
in.
1-1/2 mm
L-LED-FLXTPE-BRHO-1
3/8 in.
10 mm
Power Cord
2 m (79 in.)
Power
Supplie
s
Hexhead Connector
1/4 in.
1/2 in.
13 mm
Amp®
Connector
Starter Cord
79 in.
2m
Part #
Description
L-LED-TPEPKT-2M-1
79” (2 m) FlexTape Straight Starter Lead
L-TPEPKT-2IN-1
5 in.
2” (50
mm) FlexTape Straight Starter Lead
(127 mm)
per side
Cord
Mounting Block
per side
Part #
Description
20’ (6 m) maximum per starter, 16.4’ (5 m) maximum continuous run on single side of Tee Starter.
5/8” (16
mm) hole required.
Amp®
Connector
16.4 ft. (5 m) max.
on single side
1/4 in.
6 mm
mm
1-1/2 in. 25 Mounting
Block
38 mm 1 in.
Back-to-Back 5/8"
(15.4 mm)
Connector
20 ft. (6 m) max.
per side
Cord
5 in.
(127 mm)
Part #
Tee Connector
1-1/2 in.
38 mm
1/2 in.
13 mm
25 mm
1 in.
1/4 in.
6 mm
L-LED-TPELNK-TEE-1
1/2 in.
13 mm Cord
Jumper
13 ft. (4 m) max.
continuous run
1 in.
25 mm
1 in.
25 mm
Description
Tee Link Connector
1/4 in.
6 mm
1/4 in.
6 mm
1/2 in.
13 mm
16.4 ft. (5 m) max.
on single side
1/4 in.
Connector
6Back-to-Back
mm
L-TPELNK-BTB-1
1/2 in.
13 mm
per side
DC-ELT60-CON
Transformer
13 ft. (4 m) max.
continuous run Description
Part #
9/16"
(14.5 mm)
20 ft. (6 m) max.
Cord
5 in.
(127 mm)
Part #
Description
90° Link Connector
1/4 in.
6 mm 1/4 in.
1/4 in.
6 mm
6 mm
Part #
Description
3/8
in.
L-LED-TPELNK-5-1
10 mm
1/4 in.L-LED-TPELNK-15-1
6 mm
L-LED-TPELNK-25-1
L-LED-TPELNK-60-1
L-LED-TPELNK-120-1
polarity.
Spool of LED
FlexTape
L-LED-TPELNK-180-1
20 ft. (6m)
Additional optional
Components section:
TB-FLEXTAPE3W-1409
13 mm Cord
Starter
79 in.
Optional2Items
m
Power Cord
2 m (79 in.)
Control
lers
Install Ac
cessorie
s
Hexhead Connector
79 in.
2m
Jumper Cord
Power Cord
2 m (79 in.)
5/8” (16 mm) hole required.Cord
5 in.
DC-ELT60-CON
(127 mm)Tape LED from one starter cord is 16.4’ (5 m).
Maximum
linear run of Equiline
Transformer
20 ft. (6 m) max.
20 ft. (6 m) max.
Tee Starter Cord
1/2 in.
1-1/4 in.
6 mm all Tresco 12VDC power supplies.
FlexTape
3W works with
32 mm
Starter Cord
1-1/4 in.
32 mm
16.4’ (5 m) 12VDC Blue High Output FlexTape Roll
2m
DC-ELT60-CON
Transformer
3/32”
2.3 mm
3/8 in.
10 mm
Maximum continuous run is 16.4’ (5 m). Maximum per power supply is
20’ (6 m). Mounts with adhesive backing. Cuttable every 1”20(25
mm). To be
ft. (6m)
used on clean, smooth surfaces. Pressure must be applied for proper 3MTM
tape adhesion.
79 in.
Cord
127 mm
(5 in.)
3/16”
11/16”
Power
5 mm Supplies
Mounting Block
17 mm
20 ft. (6m)
3/16 in.
5 mm
3/32”
2.3 mm
Cord
127 mm
(5 in.)
Jumper Cord
1/16 in.
L-LED-FLXTPE-WRHO-1
1-1/2 mm
ector
1/8”
3 mm
3/8 in.
10 mm
Description
1-1/2 mm
Power
Supplie
s
5 mm
3/16 in.
FLEXIBLE LIGHTING
FlexTape 4.4W
120°
338 Lumens
per ft.
(1109 per meter)
FlexTape 4.4W
Grab attention by adding our ultra-bright 4.4W LED tape to your next project. The thin and flexible design makes
installation around corners, under shelves, and around cabinets effortless. Guaranteed to outshine and outlast other
tapes, our 4.4W FlexTape is rigorously tested, ensuring quality, durability and consistent lighting.
Features:
Store fixtures
White color tape maximizes light output
Edge lighting
Back lighting
Available in multiple color temperatures
Accent lighting
Dimmable
Cove lighting
Toe kick
Soffit
Scan for more info
FlexTape 4.4W
Specifications:
Dimensions:
Actual Size
Back
Front
3/8”
(10 mm)
Wattage
4.4W/ft. (14.4 m/ft.)
Lumens
338 per ft. (1109 per m)
Efficacy (lm/W)
77
Input Voltage
12VDC
Lamp Life
50,000 Hours
Max Per 60W Power
Supply
13’ (3.96 m)
Max Continuous Run
13’ (3.96 m)
Mounting
Surface
Warranty
3 Year
Certifications
Cuttable
every
2”(50 mm)
Beam Angle
120°
Photometric Data
Height
Light Output
1ft
119.70Fc
3ft
13.30Fc
(143.2lx)
(2.7 m L x 2.7 m W)
6ft
3.30Fc
17.4ft L x 17.7ft W
(.3 m)
(.9 m)
(1.8 m)
(1288.4lx)
(35.5lx)
Beam Area
2.9ft L x 2.9ft W
(.88 m L x .88 m W)
8.7ft L x 8.8ft W
(5.3 m L x 5.4 m W)
L-FLXTPE-48VR-1 Tested
Color Temperature
Warm White
Warm to Neutral
Cool White
Daylight
Side
11/16”
17 mm
2700K
3/16”
5 mm
3/32”
(2.3 mm)
Warm
(2700K)
3000K
4500K
Neutral
(3500K)
5500K
Cool
(4800K)
6500K
Daylight
(6500K)
3/8 in.
Jumper Cord
1/16 in.
1-1/2 mm
FlexTape 4.4W
10 mm
3/8 in.
1/8 in.
3 mm
6 m (20 in.
ft.)
11/16
1/16 in.
1-1/2Part
mm #
Required Items
1/8”
3 mm
FlexTape
LED
3/16 in.
5 mm
11/16”
16 mm
1/8”
3 mm
3/32”
2.3 mm
1/8 in.
3 mm
L-FLXTPE-WRV-1
11/16 in.
3/8 in.
10 mm
Power Cord
2 m (79 in.)
3/32”
2.3 mm
1/2 in.
13 mm
1/4
3/8in.in.
6 mm
10 mm
Power
Supplie
s
Cord
127 mm
(5 in.)
DC-ELT60-CON
Transformer
Hexhead Connector
20 ft. (6 m) max.
per side
Part #
Description
Power Cord
2 m (79 in.)
L-LED-TPEPKT-2M-1
L-TPEPKT-2IN-1
mm)
2” (50(127mm)
FlexTape Straight Starter Lead
Cord
5 in.
5/8” (16 mm) hole required. Cord
5 in.
DC-ELT60-CON
(127 mm)
Transformer
Maximum linearMounting
run ofBlock
Equiline Tape LED from one
starter cord is 16.4’ (5 m).
16.4 ft. (5 m) max.
on single side
Part #
Description
79 in.
2m
13 ft. (4 m) max.
continuous run
1/2 in.
Starter
Cord
13 mm
79 in.
Optional2Items
m
Cord
5 in.
(127 mm)
mm
Block
38 mm 1 in.
Back-to-Back 5/8"
(15.4 mm)
Connector
Part #
1/2 in.
13 mm
1/2 in.
13 mm
25 mm
1 in.
1/4 in.
6 mm
L-LED-TPELNK-TEE-1
1/2 in.
13 mm Cord
Jumper
13 ft. (4 m) max.
continuous run
1 in.
25 mm
1 in.
25 mm
Description
Tee Link Connector
1/4 in.
6 mm
1/4 in.
6 mm
1/2 in.
13 mm
16.4 ft. (5 m) max.
on single side
DC-ELT60-CON
Transformer
Description
Part #
1-1/2 in.
38 mm
Cord
5 in.
(127 mm)
1/4 in.
Connector
6Back-to-Back
mm
L-TPELNK-BTB-1
9/16"
(14.5 mm)
20 ft. (6 m) max.
per side
Tee Connector
Power Cord
2 m (79 in.)
Connector
1/4 in.
6 mm
20 ft. (6 m) max.
per side
13’ (4 m) maximum per starter, 13’ (4 m) maximum continuous run.
Amp®
5/8” (16
mm) hole required.
Part #
Description
90° Link Connector
1/4 in.
6 mm 1/4 in.
1/4 in.
6 mm
6 mm
Part #
Description
L-LED-TPELNK-5-1
3/8
in.
10 mm
6 mm
2” (5cm) FlexTape Link Cord
L-LED-TPELNK-25-1
L-LED-TPELNK-60-1
L-LED-TPELNK-120-1
polarity.
L-LED-TPELNK-180-1
Spool of LED
FlexTape
20 ft. (6m)
Additional optional
Components section:
TB-FLEXTAPE44W-1409
Hexhead Connector
Tee Starter Cord
Jumper Cord
13’ (4 m) 12VDC 6500K High Output FlexTape Roll
FlexTape 4.4W works with all Tresco 12VDC power supplies.
Amp®
Connector
Starter Cord
79 in.
2m
1-1/4 in.
32 mm
20 ft. (6 m) max.
per side
Starter Cord
FlexTape Roll
3/8 in.
10 mm
Maximum continuous run is 13’ (4 m). Maximum per power
supply
is FlexTape
Spool
of LED
20(50
ft. (6m)
13’ (4 m). Mounts with adhesive backing. Cuttable every 2”
mm). To be
tape adhesion.
Cord
127 mm
(5 in.)
Power Supplies
Mounting Block
20 ft. (6m)
3500K
High Output
5 mm
1-1/4 in.
32 mm
11/16”
17 mm
13’ (4 m) 12VDC
79 in.
2m
L-FLXTPE-DRV-1
3/16 in.
ector
Amp®
Connector
1/16 in.
1-1/2 mm
17 mm
L-FLXTPE-NRV-1
3/32”
2.3 mm
Cord
Description
L-FLXTPE-CRV-1
5/16”
7 mm
3/16”
5 mm
3/8 in.
Jumper
10 mm
1/16 in.
1-1/2 mm
17 mm
Controlle
rs
Install Ac
cessorie
s
5 mm
3/16 in.
5 in.
1-1/2 mm
1/16 in.
Power
Supplie
s
17 mm
11/16 in.
1/8 in.
FLEXIBLE LIGHTING
EquiLine Tape LED 1.5W
The low profile and flexibility of our EquiLine Tape LED makes it the perfect light for displays, signs and perimeter
lighting. Our economical 1.5W LED tape is sold by the roll, cut to length every 2” (50 mm), and has adhesive backing for
effortless installation.
Standard 200MP 3MTM adhesive backing
Features:
Store fixtures
Edge lighting
Dimmable
Back lighting
Accent lighting
Cove lighting
Toe kick
Soffit
Scan for more info
Specifications:
Dimensions:
Actual Size
Back
Front
3/8”
(10 mm)
Wattage
1.5W
Input Voltage
12VDC
Lamp Life
25,000 Hour
Max Per 60W Power
Supply
40’ (12 m)
Max Continuous Run
20’ (6 m)
Mounting
Surface
Warranty
1 Year
Cuttable
every
2”(50 mm)
Certifications
Color Temperature
Warm White
Warm to Neutral
Cool White
Daylight
Side
11/16”
(16 mm)
1/8”
(3 mm)
2700K
3/32”
(2.3 mm)
Warm
(2700K)
3000K
4500K
Neutral
(3500K)
Cool
(4800K)
5500K
6500K
Daylight
(6500K)
Jumper Cord
1/16 in. Spool of LED FlexTape
1-1/2 mm 6 m (20 ft.)
10 mm
3/8 in.
1/8 in.
3 mm
11/16 in.
17 mm
3/8 in.Jumper
10 mm
1/16 in.
in.1-1/2 mm
1/16
1-1/2 mm
Part #
Equiline Tape LED
1/8 in.
3 mm
3/16 in.
5 mm
Description
11/16 in.
L-TPELED-27SER-1
17 mm
3/8 in.
L-TPELED-35SER-1
10 mm
1/16 in.
1-1/2 mm
11/16”
16 mm
20’ (6 m) 12VDC 4800K Equiline Tape LED Roll
20’ (6 m) 12VDC 6500K Equiline Tape LED Roll
3/8 in.
10 mm
3/32”
2.3 mm
Power Cord
2 m (79 in.)
Cord
127 mm
(5 in.)
1/8”
Cord
Power
3 mm Supplies75/16”
127 mm
mm
DC-ELT60-CON
3/32”
Transformer
(5 in.)
2.3 mm
Mounting Block
3/16”
5 mm
11/16”
17 mm
of LED
Maximum continuous run is 20’ (6 m). Maximum per powerSpool
supply
is 40’FlexTape
(12 m).
20be
ft. used
(6m) on clean,
Mounts with adhesive backing. Cuttable every 2” (49 mm). To
smooth surfaces. Pressure must be applied for proper 3MTM tape adhesion.
Equiline Tape LED 1.5W works with all Tresco 12VDC power supplies.
Part #
3/32”
2.3 mm
Amp®
Connector
79 in.
2m
L-LED-TPEPKT-2M-1
Hexhead Connector
79 in.
2m
1-1/4 in.
32 mm
1/2 in.
13 mm
Part #
Description
20’ (6 m) maximum per side of Tee Starter, 40’ (12 m) overall maximum per Tee Starter. 5/8” (16 mm) hole required Power Cord
Amp®
Connector
20 ft. (6 m) max.
per side
1/4 in.
6 mm
Starter Cord
79 in.
Optional2Items
m
2 m (79 in.)
20 ft. (6 m) max.
per side
mm
Block
38 mm 1 in.
Part #
L-TPELNK-BTB-1
16.4 ft. (5 m) max.
20 ft. (6 m) max.
9/16"
per side
1/2 in.
13 mm
(14.5 mm)
1-1/2 in.
38 mm
on single side
Part #
1 in.
25 mm L-LED-TPELNK-TEE-1 25 mm
1 in.
1/2 in.
16.4 ft. (5 m) max.
13 mm on single side
1/4 in.
6 mm
1/2 in.
13 mm
1 in.
251/4
mm
in.
6 mm
13 ft. (4 m) max.
run
1/2 continuous
in.
Jumper
13 mm Cord
Cord
5 in.
(127 mm)
DC-ELT60-CON
Transformer
Description
Total: 12 m (40’)
Tee Connector
Jumper Cord
Cord
5 in.
(127 mm)
Back-to-Back 5/8"
(15.4 mm)
Connector
20 ft. (6 m) max.
per side
Power Cord
2 m (79 in.)
79” (2 m) FlexTape Straight Starter
Lead
1/4 hole
in. required.
5/8” (16 mm)
Cord
6 mm
5 in.
DC-ELT60-CON
Maximum linear run of Equiline
Tape LED from
one starter cord is 16.4’ (5 m).
(127 mm)
1/2 in.
Transformer
Mounting Block
13 mm
1-1/4 in.
32 mm
Tee Starter Cord
Description
Cord
5 in. mm) FlexTape Straight Starter Lead
2” (50
(127 mm)
L-TPEPKT-2IN-1
Starter Cord
79 in.
2m
3/8 in.
10 mm
Hexhead Connector
Starter Cord
Spool ofEquiline
LED FlexTape
20’ (6 m) 12VDC 3500K
Tape LED Roll
20 ft. (6m)
L-TPELED-65SER-1
3/16 in.
Power
Supplie
s
Amp®
Connector
20’ (6 m) 12VDC 2700 Equiline Tape LED Roll
L-TPELED-48SER-1
5 mm
1/8”
3 mm
Cord
13 ft. (4 m) max.
continuous run
1/4
in.
Connector
6Back-to-Back
mm
Description
Tee Link Connector
1/4 in.
6 mm
1/4
in.
6 mm
Part #
Description
90° Link Connector
1/4 in.
6 mm
1/4 in.
6 mm
Part #
Description
L-LED-TPELNK-5-1
3/8
in.
10 mm
L-LED-TPELNK-15-1
L-LED-TPELNK-25-1
L-LED-TPELNK-60-1
1/4 in.
6 mm
Positive and negative contacts on Tape LED and
L-LED-TPELNK-120-1
polarity.
L-LED-TPELNK-180-1
Spool of LED
FlexTape
20 ft. (6m)
Additional optional
Components section:
TB-EQUILINETAPELED15W-1409
Required Items
Controlle
rs
Install Ac
cessorie
s
5 mm
3/16 in.
3/8 in.
1-1/2 mm
1/16 in.
Power
Supplie
s
11/16 in.
FLEXIBLE LIGHTING
EquiLine Tape LED 3W
Our 3W Equiline Tape LED is easy to mount with peel-and-stick backing and features a low profile for use in commercial
and home projects. With the ability to cut to size every 1” (25 mm), this flexible tape is the economical, highly customizable
solution to your lighting needs.
Sold by the roll (16.4’ roll)
Features:
Standard 200MP 3MTM adhesive backing
Store fixtures
Edge lighting
Dimmable
Back lighting
Accent lighting
Cove lighting
Toe kick
Soffit
Scan for more info
Specifications:
Dimensions:
Actual Size
Back
Front
3/8”
(10 mm)
Wattage
3W
Input Voltage
12VDC
Lamp Life
Cuttable
every
1”(25 mm)
25,000 Hours
Max Per 60W Power
Supply
20’ (6 m)
Max Continuous Run
16.4’ (5 m)
Mounting
Surface
Warranty
1 Year
Certifications
Color Temperature
Warm White
Warm to Neutral
Cool White
Daylight
Side
5/16”
(7 mm)
2700K
1/8”
(3 mm)
3/32”
(2.3 mm)
Warm
(2700K)
3000K
4500K
Neutral
(3500K)
Cool
(4800K)
5500K
6500K
Daylight
(6500K)
11/16 in.
5 in.
1-1/2 mm
1/16 in.
3/8 in.
Jumper Cord
1/16 in.
1-1/2 mm
10 mm
3/8 in.
6 m (20 ft.)
1/8 in.
3 mm
11/16 in.
17 mm
Required Items
1/16 in.
1-1/2 mm
3/16 in.
5 mm
Equiline Tape LED
1/8”
3 mm
3/8 in.
10 mm
Jumper
1/16 in.
1-1/2 mm
11/16”
16 mm
1/8 in.
3 mm
3/32”
2.3 mm
Part #
Description
11/16 in.
3/8 in.
L-TPELED-27HER-1
1/16 in.
17 mm
10 mm
L-TPELED-35HER-1 1-1/2 mm
16.4’ (5 m) 12VDC 2700K
Equiline
Spool of LED
FlexTape Tape LED Roll
L-TPELED-48HER-1
16.4’ (5 m) 12VDC 4800K Equiline Tape LED Roll
L-TPELED-65HER-1
3/16 in.
20 ft. (6m)
5/16”
7 mm
3/32”
2.3 mm
Amp®
Connector
Power Cord
2 m (79 in.)
Cord
11/16”
127 mm
(5 in.)
Mounting Block 17 mm
DC-ELT60-CON
Transformer
Hexhead Connector
3/32”
2.3 mm
1/4 in.
Amp®
Connector
Starter Cord
79 in.
2m
Part #
Description
L-LED-TPEPKT-2M-1
L-TPEPKT-2IN-1
(127 mm)
2” (50
mm) FlexTape Straight Starter Lead
Cord
5 in.
per side
per side
Part #
Description
20’ (6 m) maximum per starter, 16.4’ (5 m) maximum continuous run on single side of Tee Starter.
Amp®
5/8” (16
mm) hole required.
Connector
16.4 ft. (5 m) max.
on single side
1/4 in.
6 mm
mm
Block
1-1/2 in. 25Mounting
38 mm 1 in.
Back-to-Back 5/8"
(15.4 mm)
Connector
20 ft. (6 m) max.
per side
Cord
5 in.
(127 mm)
Part #
Tee Connector
1-1/2 in.
38 mm
1/2 in.
13 mm
25 mm
1 in.
1/4 in.
6 mm
L-LED-TPELNK-TEE-1
1/2 in.
13 mm Cord
Jumper
13 ft. (4 m) max.
continuous run
1 in.
25 mm
1 in.
25 mm
Description
Tee Link Connector
1/4 in.
6 mm
1/4 in.
6 mm
1/2 in.
13 mm
16.4 ft. (5 m) max.
on single side
1/4 in.
6Back
mm to Back Connector
L-TPELNK-BTB-1
1/2 in.
13 mm
per side
DC-ELT60-CON
Transformer
13 ft. (4 m) max.
continuous run Description
Part #
9/16"
(14.5 mm)
20 ft. (6 m) max.
Cord
5 in.
(127 mm)
Part #
Description
90° Link Connector
1/4 in.
6 mm 1/4 in.
1/4 in.
6 mm
6 mm
Part #
Description
3/8
in.
L-LED-TPELNK-5-1
10 mm
6 mm
L-LED-TPELNK-25-1
L-LED-TPELNK-60-1
Positive and negative contacts on Tape LED and
L-LED-TPELNK-120-1
polarity.
Spool of LED
FlexTape
L-LED-TPELNK-180-1
20 ft. (6m)
Additional optional
Components section:
TB-EQUILINETAPELED3W-1409
Starter
13 mm Cord
79 in.
Optional2 Items
m
Power Cord
2 m (79 in.)
Control
lers
Install Ac
cessorie
s
Hexhead Connector
79 in.
2m
Jumper Cord
Power Cord
2 m (79 in.)
5/8” (16 mm) hole required. Cord
5 in.
DC-ELT60-CON
(127 mm)
Transformer
Maximum
linear
run of
Equiline
Tape LED from one
starter cord is 16.4’ (5 m).
Mounting
Block
20 ft. (6 m) max.
20 ft. (6 m) max.
Tee Starter Cord
1/2 in.
1-1/4 in. Tape LED 3W
6 mm
Equiline
works with all Tresco 12VDC power supplies.
32 mm
1/2 in.
13 mm
Starter Cord
1-1/4 in.
32 mm
Maximum continuous run is 16.4’ (5 m). Maximum per power
supply
is
Spool of
LED FlexTape
20’ (6 m). Mounts with adhesive backing. Cuttable every 20
1” ft.
(25(6m)
mm). To be
tape
adhesion.
79 in.
2m
Power
Supplie
s
Cord
127 mm
(5 in.)
3/16”
Power
5 mm Supplies
3/8 in.
10 mm
3/8 in.
10 mm
5 mm
r
1/8”
3 mm
Cord
Power
Supplie
s
5 mm
3/16 in.
Infinex
Infinex
Infinex is the innovative, patent-pending LED aluminum extrusion system by Tresco Lighting. Gone are the days of set
fixture sizes – simply choose your style, cut to desired length and assemble to create a customized LED fixture. Designed
by our in-house engineers and made in the USA, Infinex carries a UL safety certification and is available in five profiles
with an array of installation options.
Infinex is designed for easy DIY application. We also offer prefabricated custom solutions with a minimum quantity order.
Five profiles to choose from
FlexTape slides into proprietary power feed end cap
Clear, frosted & milk diffusers snap on/off for easy
installation and removal
Diode blending film available for clear diffusers
Infinex
Available in a variety of finishes. Custom finishes also available
Accessories
INFINEX LINKING CORDS
INFINEX COUPLERS
Features
Features
Includes ten couplers and one Allen wrench per set
Each Linking Cord comes with a male and a
Effortlessly connect scrap pieces of Square or Curved extrusions
female end for simplified installation
Multiple lengths available to service any
application
Mounting Types
SCREW
U-CLIP
SWIVEL CLIP
MAGNET
See individual profiles for mounting options available.
RECESSED
Infinex
INFINEX IN 4 STEPS
1
CHOOSE YOUR STYLE & FINISH
Five unique profiles to choose from!
CURVE
SQUARE
2
ROUND
ANGLE
RECESSED
CHOOSE YOUR FLEXTAPE & DIFFUSERS
For FlexTape options see the 12VDC Flexible section.
CLEAR DIFFUSER WITH OPTIONAL
DIODE BLENDING AND GLARE
REDUCING FILM
CLEAR DIFFUSER
FROSTED DIFFUSER
1.5W FlexTape
1.5W FlexTape
1.5W FlexTape
3W FlexTape
3W FlexTape
3W FlexTape
4.4W FlexTape
4.4W FlexTape
4.4W FlexTape
MILK DIFFUSER
1.5W FlexTape
3W FlexTape
4.4W FlexTape
Infinex
3
CUT TO SIZE
Aluminum extrusions can be cut on a variety of equipment. For the best performance and longest life, use a saw blade designed
for non-ferrous, thin stock, on your miter saw. It is also highly recommended to cut extrusion with diffuser securely attached via
clamps, tape, stretch wrap etc. to prevent unwanted cracking of diffuser.
4
ASSEMBLE
Diffuser
Diode
Blending
Film
Starter Cord
FlexTape
Screw
Screw
End Cap
Magnet
U-Clip
Square extrusion shown. Check mounting options for other extrusions.
Extrusion
Magnet
U-Clip
End Cap
Infinex
Extrusion Styles and Features
SQUARE
Top View
Profile
11/16”
(18 mm)
1/2”
(12 mm)
MOUNTING
End Caps
Sold Separately
Features
Surface mounted using magnets, U-Clips, or screws.
Easily slide magnets into channel on bottom of light.
CURVE
Top View
Profile
1-11/16”
(42.5 mm)
1/2”
(13 mm)
MOUNTING
End Caps
Sold Separately
Features
Surface mounted using magnets, U-Clips, or screws.
Easily slide magnets into channel on bottom of light.
Infinex
Profile
ANGLE
9/16”
(14 mm)
Top View
1-1/8”
(28.5 mm)
11/32”
(9 mm)
MOUNTING
30° Angle
End Caps
Sold Separately
Features
For corner mounting with screws only
Fixture directs light at 30° angle
Available Finishes (Square, Curve & Angle)
In Stock
Satin Nickel (SC)
White (WH)
Black (BL)
Dark Cherry (DC)
Natural Soft
Maple (NSM)
Available with 1000’ Min. Order
?
Medium Cherry
Light Cherry
Contemporary
Cherry
Walnut
Natural Oak
* Color Matching will match any color sample and is available with 1000’ minimum order
Dark Oak
Pear
Color
Matching
Infinex
ROUND
Profile
Top View
11/16”
(18 mm)
1”
(25 mm)
MOUNTING
0°
15°
30°
Features
U-Clip mounting allows fixture to be rotated in 15° increments either direction (30°, 15°, 0°, -15°, -30°)
RECESSED
End Caps
Sold Separately
1/16” Profile
(2 mm)
Top View
5/16”
(8 mm)
7/8”
(23 mm)
MOUNTING
7/8 in.
(22.6 mm)
~7/8
[22,6]
1/4 in.
(6 mm)
Features
11/16 in.
(18 mm)
7/16 in.
(11.5 mm)
Uses standard FlexTape Starter Lead
Without Endcap: Route a channel in wood 9/32” (7.14 mm)
depth minimum x .750” (19 mm) width and pressure fit this
extrusion in place.
Recessed extrusion uses standard FlexTape starter lead.
(L-LED-TPEPKT-2M-1)
Available Finishes (Round and Recessed)
End Caps
Sold Separately
~11/16
[17,7]
Grooved sides allow extrusion to pressure fit into place*
*With Endcap: Route a channel in wood 21/64” (8.33 mm
depth minimum x .750” (19 mm) width and pressure fit this
extrusion in place.
~1/4
[6,4]
Recessed End Cap Dimensions:
7/8 in.
(22.6 mm)
1/4 in.
(6 mm)
7/16 in.
(10.6 mm)
~7/16
[11]
3/4 in.
(19.4 mm)
11/16 in.
(18 mm)
~3/4
[19,4]
7/16 in.
(10.6 mm)
3/4 in.
(19.4 mm)
Satin Nickel
Black
7/16 in.
(11.5 mm)
3/8 in
(9 mm)
Infinex
Custom Solutions
Take control over lighting your project through Tresco’s custom Infinex solutions. From length, to light output, to screw
versus magnet mounting, you dictate the options of your unique fixture. Once decided, we will manufacture it in our USA
headquarters. No more worries about international shipping delays or extended holidays. Every light is quality checked
and bears the cULus marking denoting its safe operation. Don’t settle for something “close”, choose Infinex and get
exactly what you want. Go to trescolighting.com to submit your project and receive a custom quote.
CUSTOM SIZES
UP TO 8 FEET
WITH 1/16”
TOLERANCES
CUSTOM FULLY ASSEMBLED FIXTURES
IN
MADE THE
USA
PATENTS PENDING
MADE IN THE U.S.A.
AND SHIPS WITHIN 7 DAYS!
LOW MINIMUM REQUIREMENT
5 unique profiles
3 diffuser options (Clear, Frosted, Milk)
15 light output options
Bulk, individual, or kit packaged
Black or white cords (multipe lengths)
Low minimum quantity required
4”- 96” fixture lengths in 1/16” increments
Quick turnaround
Infinex
Required Items
Extrusions
9/16 in.
(14 mm)
L-XANG72
1-1/8 in.
(28.5 mm)
11/32 in.
(9 mm)
1 -11/16 in.
(42.5 mm)
L-XCRV72
1/2 in
(13 mm)
Part #
Description
L-XANG72-SC-1
72” (1.8 m) Angled Extrusion Satin Clear
L-XANG72-**-1
72” (1.8 m) Angled Extrusion Other Finishes*
L-XCRV72-SC-1
72” (1.8 m) Curved Extrusion Satin Clear
L-XCRV72-**-1
72” (1.8 m) Curved Extrusion Other Finishes*
L-XREC72-SC-1
72” (1.8 m) Recessed Extrusion Satin Clear
L-XREC72-BL-1
72” (1.8 m) Recessed Extrusion Black
L-XRND72-SC-1
72” (1.8 m) Round Extrusion Satin Clear
L-XRND72-BL-1
72” (1.8 m) Round Extrusion Black
L-XSQR72-SC-1
72” (1.8 m) Square Extrusion Satin Clear
L-XSQR72-**-1
72” (1.8 m) Square Extrusion Other Finishes*
**Insert BL for Black, WH for White, DC for Dark Cherry, NSM for Natural Soft Maple
1/16 in.
L-XREC72
(2 mm)
7/8 in.
(23 mm)
Diffusers/Film
.71
[18,1]
11/16 in
(18 mm)
1 in.
(25 mm)
Power
Supplie
s
3/4 in.
(19 mm)
Power Supplies
1/2 in.
(12 mm)
11/16 in.
(18 mm)
5/16 in.
(8 mm)
L-XSQR72
L-XRND72
Infinex works with all Tresco 12VDC power supplies.
11/16 in.
(18 mm)
3/16 in.
(5 mm)
Part #
Description
L-X72-DIFF-CL-1
72” (1.8 m) Diffuser Clear
L-X72-DIFF-FR-1
72” (1.8 m) Diffuser Frosted
L-X72-DIFF-MLK-1
72” (1.8 m) Diffuser Milk
L-X72-DBF-1
72” (1.8 m) Diode Blending Film
Diode Blending Film to be used with clear diffuser only.
End Cap Sets
L-XANGECP
7/16 in.
(11 mm)
.71
[18,1]
3/4 in.
(18 mm)
7/8 in.
(22.6 mm)
L-XCRVECP
1/4
in.
(6 mm)
9/16 in.
(14 mm)11/16 in.
(18 mm)
Description
L-XANGECP-GY-1
Angled end cap set,Gray
L-XANGECP-**-1
Angled end cap set, Other Colors*
L-XCRVECP-GY-1
Curved end cap set,Gray
L-XCRVECP-**-1
Curved end cap set,Other Colors*
L-XRECECP-GY-1
Recessed end cap set,Gray
L-XRECECP-BL-1
Recessed end cap set, Black
L-XRNDECP-GY-1
Round end cap set,Gray
L-XRNDECP-BL-1
Round end cap set, Black
L-XSQRECP-GY-1
7/16 in.
(11.5 mm)
1-11/16 in.
(42.5 mm)
Part #
Square end cap set,Gray
** Insert BL from Black and WH
for White
.71
L-XSQRECP-**-1
Square end cap set,Other Colors*
[18,1]
.71
[18,1]
L-XRECECP
**Insert BL for Black, WH for White, B1 for Dark Brown, B2 for Tan
L-XRNDECP
L-XSQRECP
7/16 in.
(10.6 mm)
3/4 in.
(19.4 mm)
3/4 in.
(19 mm)
17/32 in.
(14 mm)
1 in.
(25 mm)
3/4 in.
(18 mm)
Infinex
Starter Cord
Part #
Description
L-XPKT-2M-WH-1
79” (2 m) Starter Cord White
L-XPKT-2IN-WH-1
2” (50 mm) Starter Cord White
L-XPKT-2M-BL-1
79” (2 m) Starter Cord Black
L-XPKT-2IN-BL-1
2” (50 mm) Starter Cord Black
To be used on square, curved, round and angled extrusions only.
Recessed extrusion uses standard FlexTape starter lead. (L-LED-TPEPKT-2M-1)
.59
[15]
Optional Items
.59
[15]
U-Clips/Magnets
5/16 in.
(8 mm)
9/16 in.
(15 mm)
13/16 in.Infinex
(20 mm)
Swivel Clips
L-XSQR-UCLP
1 in.
(26 mm)
L-XRND-UCLP
SIDE
Part #
Description
L-XRND-UCLP-1
Round U-Clips Set (2 Clips)
L-XSQR-UCLP-1
Square/Curved U-Clips Set (2 Clips)
L-XSQR-SWCLP-1
Square/Curved Swivel Clips Set (2 Clips)
L-XRM42-155-1
Set of 2 Magnets
One U-Clip/magnet is recommended for every 1’ (.3 m) of extrusion.
No. #4 Phillips flat head screws are include with each U-Clip set.
.75in
(19mm)
1.25in
(38mm)
1/2 in.
(13 mm)
1.5 in.
(38 mm)
BOTTOM
Infinex Couplers
1/2 in.
(13 mm)
1/16 in
(2 mm)
1/16 in
(2 mm)
L-XSQRSWCLP
.65in
(16mm)
L-XRM42-155
1.25in
(38mm)
1.5 in.
(38 mm)
Couplers
1.5in
(38mm)
.5in
(13mm)
Linking Cords
Description
L-EXTBTB10-1
Pack of 10 Couplers
To be used on square and curved extrusions only.
.5in
(13mm)
6in (152mm)
10in (254mm)
24in (609mm)
48in (1.2m)
72in (1.8m)
.5in
(13mm)
.0.5in
(13mm)
.0.6in
(15mm)
Part #
B
B
AMP
(FEMALE)
AMP
(MALE)
XLNK-6
6in (152mm)
XLNK-10
A=10in (254mm)
Part #
Description
L-XLNK-15-**-1
6” (15 cm) 12VDC Infinex Linking Cord
L-XLNK-25-**-1
L-XLNK-60-**-1
L-XLNK-120-**-1
L-XLNK-180-**-1
** Insert BL from Black and WH for White
End Caps not used on linked extrusion ends.
XLNK-24
A=24in (609mm)
XLNK-48
A=48in (1.2m)
XLNK-72
A=72in (1.8m)
TB-INFINEX-1602
1-800-227-1171
trescolighting.com

FLEXIBLE LIGHTING

Transcription

Similar documents

linear lighting - Tresco Lighting

Click Here To - Rev-A

Overview - Rev-A

the name for today`s most advanced led lighting - LUXMANN

Barney`s new york - Jacqueline Supman

test + technik