INSTRUCTOR SOLUTIONS MANUAL

INSTRUCTOR SOLUTIONS MANUAL
Instructor’s Manual
to accompany
Modern Physics, 3rd Edition
Kenneth S. Krane
Department of Physics
Oregon State University
©2012 John Wiley & Sons
Preface
This Instructor’s Manual accompanies the 3rd edition of the textbook Modern
Physics (John Wiley & Sons, 2012). It includes (1) explanatory material for each
chapter; (2) suggested outside readings for instructor or student; (3) references to web
sites or other generally available simulations of phenomena; (4) exercises that can be
used in various active-engagement classroom strategies; (5) sample exam questions; and
(6) complete solutions to the end-of-chapter problems in the text.
Perhaps the greatest influence on my teaching in the time since the publication of
the 2nd edition of this textbook (1996) has been the growth into maturity of the field of
physics education research (PER). Rather than indicating specific areas of
misunderstanding, PER has demonstrated that student comprehension is enhanced by any
of a number of interactive techniques that are designed to engage the students and make
them active participants in the learning process. The demonstrated learning
improvements are robust and replicable, and they transcend differences among instructors
and institutional types. In my own trajectory in this process, I have been especially
influenced by the work of Lillian McDermott and her group at the University of
Washington1 and Eric Mazur at Harvard University.2 I am grateful to them not only for
their contributions to PER but also for their friendship over the years.
With the support of a Course, Curriculum, and Laboratory Improvement grant
from the National Science Foundation3, I have developed and tested a set of exercises
that can be used either in class as group activities or outside of class (for example, in a
Peer Instruction mode following Mazur’s format or in a Just-In-Time Teaching4 mode).
These exercises are included in this Instructor’s Manual. I am grateful for the support of
the National Science Foundation in enabling this project to be carried out. Two Oregon
State University graduate students assisted in the implementations of these reformed
teaching methods: K. C. Walsh helped with producing several simulations and illustrative
materials, with implementing an interactive web site, and with corresponding
developments in the laboratory that accompanies our course, and Pornrat
Wattanakasiwich undertook a PER project5 for her Ph.D. that involved the observation of
student reasoning about probability, which lies at the heart of most topics in modern
physics.
One of the major themes that has emerged from PER in the past two decades is
that students can often learn successful algorithms for solving problems while lacking a
fundamental understanding of the underlying concepts. The importance of the in-class or
pre-class exercises is to force students to consider these concepts and to apply them to
diverse situations that often cannot be analyzed with an equation. It is absolutely
essential to devote class time to these exercises and to follow through with exam
questions that require similar analysis and a similar articulation of the conceptual
reasoning. I strongly believe that conceptual understanding is a necessary prerequisite to
successful problem solving. In my own classes at Oregon State University I have
repeatedly observed that improved conceptual understanding leads directly to improved
problem-solving skills.
In training students to reason conceptually, it is necessary to force them to
verbalize their reasons for selecting a particular answer to a conceptual or qualitative
question, and you will learn much from listening to or reading their arguments. A simple
ii
multiple-choice conceptual question, either as a class exercise or a test problem, gives
you insufficient insight into the students’ reasoning patterns unless you also ask them to
justify their choice. Even when I have teaching assistants grade the exams in my class, I
always grade the conceptual questions myself, if only to gather insight into how students
reason. To save time I generally grade such questions with either full credit (correct
choice of answer and more-or-less correct reasoning) or no credit (wrong choice or
correct choice with incorrect reasoning).
Here’s an example of why it is necessary to require students to provide conceptual
arguments. After a unit on the Schrödinger equation, I gave the following conceptual test
question: Consider a particle in the first excited state of a one-dimensional infinite
potential energy well that extends from x = 0 to x = L. At what locations is the particle
most likely to be found? The students were required to state an answer and to give their
reasoning. One student drew a nice sketch of the probability density in the first excited
state, correctly showing maxima at x = L/4 and x = 3L/4, and stated that those locations
were the most likely ones at which to find the particle. Had I not required the reasoning,
the student would have received full credit, and I would have been satisfied with the
student’s understanding of the material. However, in stating the reasoning, the student
demonstrated what turned out to be a surprisingly common incorrect mode of reasoning.
The student apparently confused the graph of probability density with a similar sort of
roller-coaster potential energy diagram from introductory physics and reasoned as
follows: The particle is moving more slowly at the peaks of the distribution, so it spends
more time at those locations and is thus more likely to be found there. PER follow-up
work indicated that the confusion was caused in part by combining probability
distributions with energy level diagrams – students were unsure of what the ordinate
represented. As a result, I adopted a policy in class (and in this edition of the textbook)
of never showing the wave functions or probability distributions on the same plot as the
energy levels.
The overwhelming majority of PER work has concerned the introductory course,
but the effective pedagogic techniques revealed by that research carry over directly into
the modern physics course. The collection of research directly linked to topics in modern
physics is much smaller but no less revealing. The University of Washington group has
produced several papers impacting modern physics, including the understanding of
interference and diffraction of particles,, time and simultaneity in special relativity, and
the photoelectric effect (see the papers listed on their web site, ref. 1). The PER group of
Edward F. Redish at the University of Maryland has also been involved in studying the
learning of quantum concepts, including the student’s prejudices from classical physics,
probability, and conductivity.6 (Further work on the learning of quantum concepts has
been carried out by the research groups of two of Redish’s Ph.D. students, Lei Bao at
Ohio State University7 and Michael Wittmann at the University of Maine.8) Dean
Zollman’s group at Kansas State University has developed tutorials and visualizations to
enhance the teaching of quantum concepts at many levels (from pre-college through
advanced undergraduate).9 The physics education group at the University of Colorado,
led by Noah Finkelstein and Carl Wieman, is actively pursuing several research areas
involving modern physics and has produced numerous research papers as well as
simulations on topics in modern physics.10 Others who have conducted research on the
teaching of quantum mechanics and developed interactive or evaluative materials include
iii
Chandralekha Singh at the University of Pittsburgh11 and Richard Robinett at
Pennsylvania State University.12
Classroom Materials for Active Engagement
1. Reading Quizzes
I started developing the interactive classroom materials for modern physics after
successfully introducing Eric Mazur’s Peer Instruction techniques into my calculus-based
introductory course. Daily reading quizzes were a part of Mazur’s original classroom
strategy, but recently he has adopted a system that is more like Just-in-Time Teaching.
Nevertheless, I have found the reading quizzes to work effectively in both my
introductory and modern physics classes, and I have continued using them. We use
electronic classroom communication devices (“clickers”) to collect the responses, but in a
small class paper quizzes work just as well. Originally the quizzes were intended to get
students to read the textbook before coming to class, and I have over the years collected
evidence that the quizzes in fact accomplish that goal. The quizzes are given just at the
start of class, and I have found that they have two other salutary effects: (1) In the few
minutes before the bell rings at the start of class, the students are not reading the campus
newspaper or discussing last week’s football game – they are reading their physics books.
(2) It takes no time at the start of class for me to focus the students’ attention or put them
“in the mood” for physics; the quiz gets them settled into class and thinking about
physics. The multiple-choice quizzes must be very straightforward – no complex
thinking or reasoning should be required, and if a student has done the assigned reading
the quiz should be automatic and should take no more than a minute or so to read and
answer. Nearly all students get at least 80% of the quizzes correct, so ultimately they
have little impact on the grade distribution. The quizzes count only a few percent toward
the student’s total grade, so even if they miss a few their grade is not affected.
2. Conceptual Questions
I spend relatively little class time “lecturing” in the traditional sense. I prefer an
approach in which I prod and coach the students into learning and understanding the
material. The students’ reading of the textbook is an important component of this process
– I do not see the need to repeat orally everything that is already written in the textbook.
(Of course, there are some topics in any course that can be elucidated only by a well
constructed and delivered lecture. Separating those topics from those that the students
can mostly grasp from reading the text and associated in-class follow-ups comes only
from experience. Feedback obtained from the results of the conceptual exercises and
from student surveys is invaluable in this process.) I usually take about 10 minutes at the
beginning of class to summarize the important elements from that day’s reading. In the
process I list on the board new or unfamiliar words and important formulas. These
remain visible during the entire class so I can refer back to them as often as necessary. I
explain any special or restrictive circumstances that accompany the use of any equation.
I do not do formal mathematical derivations in class – they cause a rapid drop-off in
student attention. However, I do discuss or explain mathematical processes or techniques
iv
that might be unfamiliar to students. I encourage students to e-mail me with questions
about the reading before class, and at this point I answer those questions and any new
questions that may puzzle the students.
The remainder of the class period consists of conceptual questions and worked
examples. I follow the Peer Instruction model for the conceptual questions: an individual
answer with no discussion, then small group discussions, and finally a second individual
answer. On my computer I can see the histograms of the responses using the clickers, and
if there are fewer than 30% or more than 70% correct answers on the first response, the
group discussions normally don’t provide much benefit so I abandon the question and
move on to another. During the group discussion time, I wander throughout the class
listening to the comments and occasionally asking questions or giving a small nudge if I
feel a particular group is moving in the wrong direction. After the second response I ask
a member of the class to give the answer and an explanation, and I will supplement the
student’s explanation as necessary. I generally do not show the histograms of the clicker
responses to the class, neither upon the first response nor the second. The daily quiz,
summary, two conceptual questions or small group projects, and one or two worked
examples will normally fill a 50-minute class period, with a few minutes at the end for
recapitulation or additional questions. I try to end each class period with a brief teaser
regarding the next class.
Some conceptual questions listed for class discussion may appear similar to those
given on exams. I never use the same question for both class discussion and examination
during any single term. However, conceptual questions used during one term for
examinations may find use for in-class discussions during a subsequent term.
3. JITT Warm-up Exercises
Just-in-Time Teaching uses web-based “warm-up” exercises to assess the student’s prior
knowledge and misconceptions. The instructor can use the responses to the warm-up
exercises to plan the content of the next class. The reading quizzes and conceptual
questions intended for in-class activities can in many cases be used equally well for JiTT
warm-up exercises.
Lecture Demonstrations
Demonstrations are an important part of teaching introductory physics, and physics
education research has shown that learning from the demos is enhanced if they are made
interactive. (For example, you can ask students to predict the response of the apparatus,
discuss the predictions with a neighbor, and then to reconcile an incorrect prediction with
the observation.) Unfortunately, there are few demos that can be done in the modern
physics classroom. Instead, we must rely on simulations and animations. There are
many effective and interesting instructional software packages on the web that can be
downloaded for your class, and you can make them available for the students to use
outside of class. I have listed in this Manual some of the modern physics software that I
have used in my classes. Of particular interest is the open-source collection of Physlets
(physics applets) covering relativity and quantum physics produced by Mario Belloni,
Wolfgang Christian, and Anne J. Cox.13
v
Sample Test Questions
This Instructor’s Manual includes a selection of sample test questions. A typical midterm
exam in my Modern Physics class might include 4 multiple-choice questions (no
reasoning arguments required) worth 20 points, 2 conceptual questions (another 20
points) requiring the student to select an answer from among 2 or 3 possibilities and to
give the reasons for that choice, and 3 numerical problems worth a total of 60 points.
Students have 1 hour and 15 minutes to complete the exam. The final exam is about 1.5
times the length of a midterm exam.
One point worth considering is the use of formula sheets during exams. Over the
years I have gone back and forth among many different exam systems: open book, closed
book and notes, and closed book with a student-generated formula sheet. I have found
that in the open book format students seem to spend a lot of time leafing through the
book looking for an essential formula or constant. On the other hand, I have been
amazed at how many equations a student can pack onto a single sheet of paper, and I
often find myself wondering how much better such students would perform on exams if
they spent as much study time working on practice problems as they do miniaturizing
equations. (Students often have difficulty distinguishing important formulas, which
represent a fundamental concept or relationship, from mere equations which might be
intermediate steps in solving a problem or deriving a formula.) I have finally settled on a
closed book format in which I supply the formula sheet with each exam. I feel this has a
number of advantages: (1) It equalizes the playing field. (2) Students don’t need to waste
time copying equations. (3) The formula sheet, a copy of which I give to students at the
beginning of the term, itself serves as a kind of study guide. (4) Students use the formula
sheet when working homework problems and studying for the exams, so they know what
formulas are on the sheet and where they are located. (5) I can be sure that the formulas
that students need to work the exams are included on the formula sheet. A sample copy
of my formula sheet is included in this Instructor’s Manual.
This Instructor’s Manual is always a work in progress. I would be grateful to
receive corrections or suggestions from users.
Kenneth S. Krane
[email protected]
References
1. http://www.phys.washington.edu/groups/peg/
2. http://mazur.harvard.edu/education/educationmenu.php. Also see E. Mazur, Peer
Instruction: A User’s Manual (Prentice Hall, 1997).
vi
3. National Science Foundation grant DUE-0340818, “Materials for Active Engagement
in the Modern Physics Course”
4. http://jittdl.physics.iupui.edu/jitt/. Also see G. Novak, A. Gavrin, W. Christian, and E.
Patterson, Just in Time Teaching: Blending Active Learning with Web Technology
(Benjamin Cummings, 1999).
5. “Model of Student Understanding of Probability in Modern Physics,” Pornrat
Wattanakasiwich, Ph.D. dissertation, Oregon State University, 2005.
6. http://www.physics.umd.edu/perg/
7. http://www.physics.ohio-state.edu/~lbao/
8. http://www.umaine.edu/per/
9. http://web.phys.ksu.edu/
10. http://www.colorado.edu/physics/EducationIssues/index.htm
11. http://www.phyast.pitt.edu/~cls/
12. http://www.phys.psu.edu/~rick/ROBINETT/robinett.html
13. M. Belloni, W. Christian, and A. J. Cox, Physlet Quantum Physics: An Interactive
Introduction (Pearson Prentice Hall, 2006).
vii
Table of Contents
Chapter 1……………………………………………………..1
Chapter 2……………………………………………………14
Chapter 3…………………………………………………....47
Chapter 4…………………………………………………....72
Chapter 5…...……………………………………………….96
Chapter 6……………………………………………….….128
Chapter 7…………………………………………………..151
Chapter 8………………………………………………..…169
Chapter 9…………………………………………………..183
Chapter 10…………………………………………………203
Chapter 11…………………………………………..……..226
Chapter 12…………………………………………………249
Chapter 13………………………………………………....269
Chapter 14……………………………………………..…..288
Chapter 15…………………………………………..……..305
Sample Formula Sheet for Exams………………………….
viii
Chapter 1
This chapter presents a review of some topics from classical physics. I have often
heard from instructors using the book that “my students have already studied a year of
introductory classical physics, so they don’t need the review.” This review chapter gives
the opportunity to present a number of concepts that I have found to cause difficulty for
students and to collect those concepts where they are available for easy reference. For
example, all students should know that kinetic energy is 12 mv 2 , but few are readily
familiar with kinetic energy as p 2 / 2m , which is used more often in the text. The
expression connecting potential energy difference with potential difference for an electric
charge q, ΔU = qΔV , zips by in the blink of an eye in the introductory course and is
rarely used there, while it is of fundamental importance to many experimental set-ups in
modern physics and is used implicitly in almost every chapter. Many introductory
courses do not cover thermodynamics or statistical mechanics, so it is useful to “review”
them in this introductory chapter.
I have observed students in my modern course occasionally struggling with
problems involving linear momentum conservation, another of those classical concepts
that resides in the introductory course. Although we physicists regard momentum
conservation as a fundamental law on the same plane as energy conservation, the latter is
frequently invoked throughout the introductory course while former appears and virtually
disappears after a brief analysis of 2-body collisions. Moreover, some introductory texts
present the equations for the final velocities in a one-dimensional elastic collision,
leaving the student with little to do except plus numbers into the equations. That is,
students in the introductory course are rarely called upon to begin momentum
conservation problems with pinitial = pfinal . This puts them at a disadvantage in the
application of momentum conservation to problems in modern physics, where many
different forms of momentum may need to be treated in a single situation (for example,
classical particles, relativistic particles, and photons). Chapter 1 therefore contains a
brief review of momentum conservation, including worked sample problems and end-ofchapter exercises.
Placing classical statistical mechanics in Chapter 1 (as compared to its location in
Chapter 10 in the 2nd edition) offers a number of advantages. It permits the useful
expression K av = 23 kT to be used throughout the text without additional explanation. The
failure of classical statistical mechanics to account for the heat capacities of diatomic
gases (hydrogen in particular) lays the groundwork for quantum physics. It is especially
helpful to introduce the Maxwell-Boltzmann distribution function early in the text, thus
permitting applications such as the population of molecular rotational states in Chapter 9
and clarifying references to “population inversion” in the discussion of the laser in
Chapter 8. Distribution functions in general are new topics for most students. They may
look like ordinary mathematical functions, but they are handled and interpreted quite
differently. Absent this introduction to a classical distribution function in Chapter 1, the
students’ first exposure to a distribution function will be |ψ|2, which layers an additional
level of confusion on top of the mathematical complications. It is better to have a chance
to cover some of the mathematical details at an earlier stage with a distribution function
that is easier to interpret.
1
Suggestions for Additional Reading
Some descriptive, historical, philosophical, and nonmathematical texts which give good
background material and are great fun to read:
A. Baker, Modern Physics and Anti-Physics (Addison-Wesley, 1970).
F. Capra, The Tao of Physics (Shambhala Publications, 1975).
K. Ford, Quantum Physics for Everyone (Harvard University Press, 2005).
G. Gamow, Thirty Years that Shook Physics (Doubleday, 1966).
R. March, Physics for Poets (McGraw-Hill, 1978).
E. Segre, From X-Rays to Quarks: Modern Physicists and their Discoveries (Freeman, 1980).
G. L. Trigg, Landmark Experiments in Twentieth Century Physics (Crane, Russak, 1975).
F. A. Wolf, Taking the Quantum Leap (Harper & Row, 1989).
G. Zukav, The Dancing Wu Li Masters, An Overview of the New Physics (Morrow, 1979).
Gamow, Segre, and Trigg contributed directly to the development of modern physics and
their books are written from a perspective that only those who were part of that
development can offer. The books by Capra, Wolf, and Zukav offer controversial
interpretations of quantum mechanics as connected to eastern mysticism, spiritualism, or
consciousness.
Materials for Active Engagement in the Classroom
A. Reading Quizzes
1. In an ideal gas at temperature T, the average speed of the molecules:
(1) increases as the square of the temperature.
(2) increases linearly with the temperature.
(3) increases as the square root of the temperature.
(4) is independent of the temperature.
2. The heat capacity of molecular hydrogen gas can take values of 3R/2, 5R/2, and 7R/2
at different temperatures. Which value is correct at low temperatures?
(2) 5R/2
(3) 7R/2
(1) 3R/2
Answers
1. 3
2. 1
B. Conceptual and Discussion Questions
1. Equal numbers of molecules of hydrogen gas (molecular mass = 2 u) and helium gas
(molecular mass = 4 u) are in equilibrium in a container.
(a) What is the ratio of the average kinetic energy of a hydrogen molecule to the
average kinetic energy of a helium molecule?
K H / K He = (1) 4 (2) 2 (3) 2
(4) 1
(5) 1/ 2
(6) 1/2 (7) 1/4
2
(b) What is the ratio of the average speed of a hydrogen molecule to the average
speed of a helium molecule?
vH / vHe =
(1) 4 (2) 2 (3) 2
(4) 1
(5) 1/ 2
(6) 1/2 (7) 1/4 (C)
(c) What is the ratio of the pressure exerted on the walls of the container by the
hydrogen gas to the pressure exerted on the walls by the helium gas?
PH / PHe =
(1) 4 (2) 2 (3) 2
(4) 1
(5) 1/ 2
(6) 1/2 (7) 1/4
2. Containers 1 and 3 have volumes of 1 m3 and container 2 has a volume of 2 m3.
Containers 1 and 2 contain helium gas, and container 3 contains neon gas. All three
containers have a temperature of 300 K and a pressure of 1 atm.
He
He
1
2
Ne
3
(a) Rank the average speeds of the molecules in the containers in order from largest to
smallest.
(1) 1 > 2 > 3
(2) 1 = 2 > 3
(3) 1 = 2 = 3
(4) 3 > 1 > 2
(5) 3 > 1 = 2
(6) 2 > 1 > 3
(b) In which container is the average kinetic energy per molecule the largest?
(1) 1
(2) 2
(3) 3
(4) 1 and 2
(5) 1 and 3
(6) All the same
3. (a) Consider diatomic nitrogen gas at room temperature, in which only the
translational and rotational motions are possible. Suppose that 100 J of energy is
transferred to the gas at constant volume. How much of this energy goes into the
translational kinetic energy of the molecules?
(1) 20 J
(2) 40 J
(3) 50 J
(4) 60 J
(5) 80 J
(6) 100 J
(b) Now suppose that the gas is at a higher temperature, so that vibrational motion is
also possible. Compared with the situation at room temperature, is the fraction of the
added energy that goes into translational kinetic energy:
(1) smaller?
(2) the same?
(3) greater?
Answers
1. (a) 4 (b) 3 (c) 4
2. (a) 2 (b) 6
3
3. (a) 4 (b) 1
Sample Exam Questions
A. Multiple Choice
1. A container holds gas molecules of mass m at a temperature T. A small probe
inserted into the container measures the value of the x component of the velocity of
the molecules. What is the average value of 12 mvx2 for these molecules?
(a) 32 kT
(b) 12 kT
(c) kT
(d) 3kT
2. A container holds N molecules of a diatomic gas at temperature T. At this
temperature, rotational and vibrational motions of the gas molecules are allowed. A
quantity of energy E is transferred to the gas. What fraction of this added energy is
responsible for increasing the temperature of the gas?
(a) All of the added energy
(b) 3/5
(c) 2/5
(d) 2/7
(e) 3/7
3. Two identical containers with fixed volumes hold equal amounts of Ne gas and N2 gas
at the same temperature of 1000 K. Equal amounts of heat energy are then transferred
to the two gases. How do the final temperatures of the two gases compare?
(a) T(Ne) = T(N2)
(b) T(Ne) > T(N2)
(c) T(Ne) < T(N2)
Answers
1. b
2. e
3. b
B. Conceptual
1. A container of volume V holds an equilibrium mixture of N molecules of oxygen gas
O2 (molecular mass = 32.0 u) and also 2N molecules of He gas (mass = 4.00 u). Is
the average molecular energy of O2 greater than, equal to, or less than the average
molecular energy of He? EXPLAIN YOUR ANSWER.
2. Consider two containers of identical volumes. Container 1 holds N molecules of He
at temperature T. Container 2 holds the same number N molecules of H2 at the same
temperature T. Is the average energy per molecule of He greater than, less than, or
the same as the average energy per molecule of H2? EXPLAIN YOUR ANSWER.
Answers
1. equal to
2. the same as
C. Problems
1. N molecules of a gas are confined in a container at temperature T. A measuring
device in the container can determine the number of molecules in a range of 0.002v at
any speed v, that is, the number of molecules with speeds between 0.999v and 1.001v.
When the device is set for molecules at the speed vrms, the result is N1. When it is set
for molecules at the speed 2vrms, the result is N2. Find the value of N1/N2. Your
answer should be a pure number, involving no symbols or variables.
2. A container holds 2.5 moles of helium (a gas with one atom per molecule; atomic mass =
4.00 u; molar mass = 0.00400 kg) at a temperature of 342 K. What fraction of the gas
molecules has translational kinetic energies between 0.01480 eV and 0.01520 eV?
4
3. One mole of N2 gas (molecular mass = 28 u) is confined to a container at a
temperature of 387 K. At this temperature, you may assume that the molecules are
free to both rotate and vibrate.
(a) What fraction of the molecules has translational kinetic energies within ±1% of
the average translational kinetic energy?
(b) Find the total internal energy of the gas.
Answers:
1. 11.25
2. 0.0066
3. (a) 0.0093 (b) 11.2 kJ
5
Problem Solutions
1. (a) Conservation of momentum gives px ,initial = px ,final , or
mH vH,initial + mHe vHe,initial = mH vH,final + mHe vHe,final
Solving for vHe,final with vHe,initial = 0 , we obtain
vHe,final =
mH (vH,initial − vH,final )
mHe
(1.674 × 10−27 kg)[1.1250 × 107 m/s − (−6.724 × 106 m/s)]
=
= 4.527 × 106 m/s
−27
6.646 × 10 kg
(b) Kinetic energy is the only form of energy we need to consider in this elastic
collision. Conservation of energy then gives K initial = K final , or
1
2
2
2
2
2
mH vH,initial
+ 12 mHe vHe,initial
= 12 mH vH,final
+ 12 mHe vHe,final
Solving for vHe,final with vHe,initial = 0 , we obtain
vHe,final =
2
2
mH (vH,initial
− vH,final
)
mHe
(1.674 ×10−27 kg)[(1.1250 × 107 m/s) 2 − (−6.724 × 106 m/s) 2 ]
=
= 4.527 ×106 m/s
−27
6.646 ×10 kg
2. (a) Let the helium initially move in the x direction. Then conservation of momentum
gives:
px ,initial = px ,final :
mHe vHe,initial = mHe vHe,final cos θ He + mO vO,final cos θ O
p y ,initial = p y ,final :
0 = mHe vHe,final sin θ He + mO vO,final sin θ O
From the second equation,
vO,final = −
mHe vHe,final sin θ He
mO sin θ O
=−
(6.6465 ×10−27 kg)(6.636 × 106 m/s)(sin 84.7°)
= 2.551× 106 m/s
−26
(2.6560 ×10 kg)[sin(−40.4°)]
(b) From the first momentum equation,
6
vHe,initial =
mHe vHe,final cosθ He + mO vO,final cos θ O
mHe
(6.6465 × 10 kg)(6.636 × 106 m/s)(cos 84.7°) + (2.6560 × 10−26 kg)(2.551 × 106 m/s)[cos(−40.4°)]
=
6.6465 × 10−27 kg
= 8.376 × 106 m/s
−27
3. (a) Using conservation of momentum for this one-dimensional situation, we have
px ,initial = px ,final , or
mHe vHe + mN vN = mD vD + mO vO
Solving for vO with vN = 0 , we obtain
vO =
mHe vHe − mD vD (3.016 u)(6.346 × 106 m/s) − (2.014 u)(1.531× 107 m/s)
=
= −7.79 × 105 m/s
15.003 u
mO
(b) The kinetic energies are:
2
K initial = 12 mHe vHe
+ 12 mN vN2 = 12 (3.016 u)(1.6605 ×10−27 kg/u)(6.346 × 106 m/s) 2 = 1.008 × 10−13 J
K final = 12 mD vD2 + 12 mO vO2 = 12 (2.014 u)(1.6605 × 10−27 kg/u)(1.531×107 m/s) 2
+ 12 (15.003 u)(1.6605 × 10−27 kg/u)(7.79 ×105 m/s) 2 = 3.995 × 10−13 J
As in Example 1.2, this is also a case in which nuclear energy turns into kinetic
energy. The gain in kinetic energy is exactly equal to the loss in nuclear energy.
4. Let the two helium atoms move in opposite directions along the x axis with speeds
v1 and v2 . Conservation of momentum along the x direction ( p x ,initial = px ,final ) gives
0 = m1v1 − m2 v2
or
v1 = v2
The energy released is in the form of the total kinetic energy of the two helium atoms:
K1 + K 2 = 92.2 keV
Because v1 = v2 , it follows that K1 = K 2 = 46.1 keV , so
v =
2 K1
2(46.1 ×103 eV)(1.602 × 10−19 J/eV)
=
= 1.49 ×106 m/s
−27
m1
(4.00 u)(1.6605 ×10 kg/u)
v2 = v1 = 1.49 × 106 m/s
7
5. (a) The kinetic energy of the electrons is
K i = 12 mvi2 = 12 (9.11× 10−31 kg)(1.76 × 106 m/s) = 14.11× 10−19 J
In passing through a potential difference of ΔV = Vf − Vi = +4.15 volts , the potential
energy of the electrons changes by
ΔU = qΔV = (−1.602 × 10−19 C)( + 4.15 V) = −6.65 × 10−19 J
Conservation of energy gives K i + U i = K f + U f , so
K f = K i + (U i − U f ) = K i − ΔU = 14.11× 10−19 J + 6.65 × 10−19 J = 20.76 × 10−19 J
vf =
2Kf
2(20.76 × 10−19 J)
=
= 2.13 × 106 m/s
−31
m
9.11×10 kg
(b) In this case ΔV = −4.15 volts, so ΔU = +6.65 × 10−19 J and thus
K f = K i − ΔU = 14.11× 10−19 J − 6.65 × 10−19 J = 7.46 × 10−19 J
vf =
2Kf
2(7.46 ×10−19 J)
=
= 1.28 ×106 m/s
−31
m
9.11×10 kg
6. (a) Δx A = vΔt A = (0.624)(2.997 × 108 m/s)(124 × 10−9 s) = 23.2 m
(b) ΔxB = vΔt B = (0.624)(2.997 × 108 m/s)(159 × 10−9 s) = 29.7 m
7. With T = 35°C = 308 K and P = 1.22 atm = 1.23 × 105 Pa ,
N
P
1.23 ×105 Pa
=
=
= 2.89 ×1025 atoms/m3
-23
V kT (1.38 ×10 J/K)(308 K)
so the volume available to each atom is (2.89 × 1025/m3)−1 = 3.46 × 10−26 m3. For a
spherical atom, the volume would be
4
3
π R 3 = 43 π (0.710 × 10−10 m)3 = 1.50 × 10−30 m3
The fraction is then
1.50 × 10−30
= 4.34 × 10−5
−26
3.46 × 10
8
8. Differentiating N(E) from Equation 1.22, we obtain
dN 2 N
1 ⎡ 1 −1/ 2 − E / kT
⎛ 1
=
E e
+ E1/ 2 ⎜ −
3/ 2 ⎢ 2
dE
π (kT ) ⎣
⎝ kT
⎞ − E / kT ⎤
⎟e
⎥
⎠
⎦
To find the maximum, we set this function equal to zero:
1
⎛1 E
E −1/ 2 e − E / kT ⎜ −
3/ 2
π (kT )
⎝ 2 kT
2N
⎞
⎟=0
⎠
Solving, we find the maximum occurs at E = 12 kT . Note that E = 0 and E = ∞ also
satisfy the equation, but these solutions give minima rather than maxima.
9. For this case kT = (280 K)(8.617 ×10−5 eV/K) = 0.0241 eV . We take dE as the width
of the interval (0.012 eV) and E as its midpoint (0.306 eV). Then
dN = N ( E ) dE =
2N
1
(0.306 eV)1/ 2 e − (0.306 eV)/(0.0241 eV) (0.012 eV) = 6.1× 10−6 N
3/ 2
π (0.0241 eV)
10. (a) From Eq. 1.31,
ΔEint = 52 nR ΔT = 52 (2.37 moles)(8.315 J/mol ⋅ K)(65.2 K) = 3.21× 103 J
(b) From Eq. 1.32,
ΔEint = 52 nR ΔT = 72 (2.37 moles)(8.315 J/mol ⋅ K)(65.2 K) = 4.50 ×103 J
(c) For both cases, the change in the translational part of the kinetic energy is given
by Eq. 1.29:
ΔEint = 32 nR ΔT = 52 (2.37 moles)(8.315 J/mol ⋅ K)(65.2 K) = 1.93 ×103 J
11. After the collision, m1 moves with speed v1′ (in the y direction) and m2 with speed v2′
(at an angle θ with the x axis). Conservation of energy then gives Einitial = Efinal:
1
2
m1v12 = 12 m1v1′2 + 12 m2v2′2
or
Conservation of momentum gives:
9
v 2 = v1′2 + 3v2′2
px ,initial = p x ,final : m1v1 = m2v2′ cos θ
or
p y ,initial = p y ,final : 0 = m1v1′ − m2v2′ sin θ
v = 3v2′ cos θ
v1′ = 3v2′ sin θ
or
We first solve for the speeds by eliminating θ from these equations. Squaring the two
momentum equations and adding them, we obtain v 2 + v1′2 = 9v2′2 , and combining this
result with the energy equation allows us to solve for the speeds:
v1′ = v / 2
v2′ = v / 6
and
By substituting this value of v2′ into the first momentum equation, we obtain
cos θ = 2 / 3
or
θ = 35.3°
12. The combined particle, with mass m′ = m1 + m2 = 3m , moves with speed v′ at an angle
θ with respect to the x axis. Conservation of momentum then gives:
px ,initial = px ,final : m1v1 = m′v′ cos θ
or
p y ,initial = p y ,final : m2v2 = m′v′ sin θ
or
v = 3v′ cos θ
4
3
v = 3v′ sin θ
We can first solve for θ by dividing these two equations to eliminate the unknown v′:
tan θ =
θ = 53.1°
or
4
3
Now we can substitute this result into either of the momentum equations to find
v′ = 5v / 9
The kinetic energy lost is the difference between the initial and final kinetic energies:
K initial − K final = 12 m1v12 + 12 m2v22 − 12 m′v′2 = 12 mv 2 + 12 (2m)( 23 v ) 2 − 12 (3m )( 95 v ) 2 =
26
27
( 12 mv 2 )
The total initial kinetic energy is 12 mv 2 + 12 (2m)( 23 v) 2 = 179 ( 12 mv 2 ) . The loss in kinetic
energy is then 26
51 = 51% of the initial kinetic energy.
13. (a) Let v1 represent the helium atom that moves in the +x direction, and let v2
represent the other helium atom (which might move either in the positive or negative
x direction). Then conservation of momentum ( px ,initial = p x ,final ) gives
mv = m1v1 + m2 v2
or
10
2v = v1 + v2
where v2 may be positive or negative. The initial velocity v is
2K
2(40.0 × 103 eV)(1.602 × 10-19 J/eV)
v=
=
= 9.822 × 105 m/s
-27
m
(8.00 u)(1.6605 × 10 kg/u)
The energy available to the two helium atoms after the decay is the initial kinetic
energy of the beryllium atom plus the energy released in its decay:
K + 92.2 keV = 12 m1v12 + 12 m2 v22 = 12 m1v12 + 12 m2 (2v − v1 ) 2
where the last substitution is made from the momentum equation. Solving this
quadratic equation for v1 , we obtain v1 = 2.47 ×106 m/s or − 0.508 × 106 m/s . Because
we identified m1 as the helium moving in the positive x direction, it is identified with
the positive root and thus (because the two heliums are interchangeable in the
equation) the second value represents the velocity of m2:
v1 = 2.47 × 106 m/s, v2 = −0.508 × 106 m/s
(b) Suppose we were to travel in the positive x direction at a speed of v = 9.822× 105
m/s, which is the original speed of the beryllium from part (a). If we travel at the
same speed as the beryllium, it appears to be at rest, so its initial momentum is zero in
this frame of reference. The two heliums then travel with equal speeds in opposite
directions along the x axis. Because they share the available energy equally, each
helium has a kinetic energy of 46.1 keV and a speed of 2 K / m = 1.49 × 106 m/s , as
we found in Problem 4. Let’s represent these velocities in this frame of reference
as v1′ = +1.49 × 106 m/s and v2′ = −1.49 × 106 m/s . Transforming back to the original
frame, we find
v1 = v1′ + v = 1.49 × 106 m/s + 9.822 × 105 m/s = 2.47 × 106 m/s
v2 = v2′ + v = −1.49 × 106 m/s + 9.822 × 105 m/s = −0.508 × 106 m/s
14. (a) Let the second helium move in a direction at an angle θ with the x axis. (We’ll
assume that the 30° angle for m1 is measured above the x axis, while the angle θ for
m2 is measured below the x axis. Then conservation of momentum gives:
3
or
2v −
px ,initial = px ,final : mv = m1v1 cos 30° + m2 v2 cos θ
v1 = v2 cos θ
2
1
v1 = v2 sin θ
2
We can eliminate the angle θ by squaring and adding the two momentum equations:
p y ,initial = p y ,final : 0 = m1v1 sin 30° − m2v2 sin θ
11
or
4v 2 + v12 − 2 3vv1 = v22
The kinetic energy given to the two heliums is equal to the original kinetic energy
2
1
2 mv of the beryllium plus the energy released in the decay:
1
2
mv 2 + 92.2 keV = 12 m1v12 + 12 m2 v22 = 12 m1v12 + 12 m2 (4v 2 + v12 − 2 3vv1 )
1
2
(m1 + m2 )v12 − 3m2 vv1 + (2m2 v 2 − 12 mv 2 − 92.2 keV) = 0
Solving this quadratic equation gives
v1 = 2.405 × 106 m/s, − 0.321× 106 m/s
Based on the directions assumed in writing the momentum equations, only the
positive root is meaningful. We can substitute this value for v1 into either the
momentum or the energy equations to find v2 and so our solution is:
v1 = 2.41×106 m/s, v2 = 1.25 ×106 m/s
The angle θ can be found by substituting these values into either of the momentum
equations, for example
v
2.41×106 m/s
θ = sin −1 1 = sin −1
= 74.9°
2v2
2(1.25 ×106 m/s)
(b) The original speed of the beryllium atom is v = 2 K / m = 1.203 × 106 m/s . If we
were to view the experiment from a frame of reference moving at this velocity, the
original beryllium atom would appear to be at rest. In this frame of reference, in
which the initial momentum is zero, the two helium atoms are emitted in opposite
directions with equal speeds. Each helium has a kinetic energy of 46.1 keV and a
speed of v1′ = v2′ = 1.49 × 106 m/s . Let φ represent the angle that each of the helium
atoms makes with the x axis in this frame of reference. Then the relationship between
the x components of the velocity of m1 in this frame of reference and the original
frame of reference is
v1 cos 30° = v1′ cos φ + v
and similarly for the y components
v1 sin 30° = v1′ sin φ
We can divide these two equations to get
12
cot 30° =
v1′ cos φ + v
v1′ sin φ
which can be solved to give φ = 53.8°. Using this value of φ, we can then find
v1 = 2.41×106 m/s . We can also write the velocity addition equations for m2:
v2 cos θ = −v2′ cos φ + v
and
v2 sin θ = −v2′ sin φ
which describe respectively the x and y components. Solving as we did for m1, we
find v2 = 1.25 × 106 m/s and θ = 74.9° .
15. (a) With K = 23 kT ,
ΔK = 23 k ΔT = 23 (1.38 × 10−23 J/K)(80 K) = 1.66 × 10−21 J = 0.0104 eV
(b) With U = mgh ,
h=
U
1.66 × 10−21 J
=
= 2550 m
mg (40.0 u)(1.66 × 10−27 kg/u)(9.80 m/s2 )
16. We take dE to be the width of this small interval: dE = 0.04kT − 0.02kT = 0.02kT ,
and we evaluate the distribution function at an energy equal to the midpoint of the
interval (E = 0.03kT):
dN N ( E ) dE
2
1
=
=
(0.03kT )1/ 2 e − (0.03kT ) / kT (0.02kT ) = 3.79 ×10−3
3/ 2
N
N
π (kT )
17. If we represent the molecule as two atoms considered as point masses m separated by
a distance 2R, the rotational inertia about one of the axes is I x′ = mR 2 + mR 2 = 2mR 2 .
On average, the rotational kinetic energy about any one axis is 12 kT , so
1
2
I x′ω x2′ = 12 kT and
kT
kT
(1.38 ×10−23 J/K)(300 K)
=
=
= 4.61× 1012 rad/s
ω x′ =
−27
−9
2
2
I x′
2mR
2(15.995 u)(1.6605 × 10 kg/u)(0.0605 ×10 m)
13
Chapter 2
This chapter presents an introduction to the special theory of relativity. It is
written assuming that students have not yet seen a full presentation of then topic, even
though they might have seen selected bits in their introductory courses.
I have chosen not to introduce the speed parameter β = v / c and the Lorentz
factor γ = (1 − β 2 ) −1/ 2 , as I have found from practical experience in teaching the subject
that while they may render equations more compact they also can make an intimidating
subject more obscure. Students seem more comfortable with equations in which the
velocities appear explicitly.
For similar reasons I have also chosen not to rely on spacetime (Minkowski)
diagrams for the presentation of the space and time aspects of relativity, although in this
edition I give a short introduction to their use in analyzing the twin paradox, where they
do serve to enhance the presentation.
Any presentation of special relativity offers the instructor an opportunity to dwell
on elucidating the new ways of thinking about space and time engendered by the theory.
Some references to the resulting logical paradoxes are listed below. In terms of
applicability, however, the remainder of the textbook relies more heavily on the more
straightforward applications of relativistic dynamics. The Lorentz transformation, for
example, does not reappear beyond this chapter, nor does reference to clock
synchronization. Relativistic time dilation and Doppler shift do appear occasionally.
Approximately 2/3 of this chapter deals with aspects of space and time, while only 1/3
deals with the more applicable issues of relativistic mass, momentum, and energy. In
terms of division of class time, I try to divide the two topics more like 50/50, being
especially careful to make sure that students understand how to apply momentum and
energy conservation to situations involving high-speed motion.
Supplemental Materials
Time dilation:
http://faraday.physics.utoronto.ca/PVB/Harrison/SpecRel/Flash/TimeDilation.html
http://galileoandeinstein.physics.virginia.edu/more_stuff/flashlets/lightclock.swf
Physlet Quantum Physics, Section 2.4
Length contraction:
http://faraday.physics.utoronto.ca/PVB/Harrison/SpecRel/Flash/LengthContract.html
http://science.sbcc.edu/physics/flash/relativity/LengthContraction.html
Simultaneity:
http://faraday.physics.utoronto.ca/GeneralInterest/Harrison/SpecRel/Flash/Simultaneity.html
http://science.sbcc.edu/physics/flash/relativity/Simultaniety.html
Twin paradox:
http://webphysics.davidson.edu/physletprob/ch10_modern/default.html
Physlet Quantum Physics, Sections 2.8 and 3.6
14
Other relativity paradoxes:
The best collection I know is that of Taylor and Wheeler’s Spacetime Physics (2nd
edition, 1992). See especially space war (pp. 79-80), the rising manhole (p. 116), the
pole and barn paradox (p. 166), and the detonator paradox (pp. 185-186).
Suggestions for Additional Reading
Special relativity has perhaps been the subject of more books for the nontechnical reader
than any other area of science:
L. Barnett, The Universe and Dr. Einstein (Time Inc., 1962).
G. Gamow, Mr. Tompkins in Paperback (Cambridge University Press, 1967).
L. Marder, Time and the Space Traveler (University of Pennsylvania Press, 1971).
N. D. Mermin, It’s About Time: Understanding Einstein’s Relativity (Princeton
University Press, 2009).
B. Russell, The ABC of Relativity (New American Library, 1958).
L. Sartori, Understanding Relativity: A Simplified Approach to Einstein’s Theories
(University of California Press, 1996).
J. T. Schwartz, Relativity in Illustrations (New York University Press, 1962).
R. Wolfson, Simply Einstein: Relativity Demystified (Norton, 2003).
Gamow’s book takes us on a fanciful journey to a world where c is so small that effects
of special relativity are commonplace. Other introductions to relativity, more complete
mathematically but not particularly more difficult than the present level, are the
following:
P. French, Special Relativity (Norton, 1968).
H. C. Ohanian, Special Relativity: A Modern Introduction (Physics Curriculum and
Instruction, 2001)
R. Resnick, Introduction to Special Relativity (Wiley, 1968).
R. Resnick and D. Halliday, Basic Concepts in Relativity (Macmillan, 1992).
For discussions of the appearance of objects traveling near the speed of light, see:
V. T. Weisskopf, “The Visual Appearance of Rapidly Moving Objects,” Physics Today,
September 1960.
I. Peterson, “Space-Time Odyssey,” Science News 137, 222 (April 14, 1990).
Some other useful works are:
L. B. Okun, “The Concept of Mass,” Physics Today, June 1989, p. 31.
C. Swartz, “Reference Frames and Relativity,” The Physics Teacher, September 1989, p. 437.
R. Baierlein, “Teaching E = mc2,” The Physics Teacher, March 1991, p. 170.
Okun’s article explores the history of the “relativistic mass” concept and the connection
between mass and rest energy. The article by Swartz gives some mostly classical
descriptions of inertial and noninertial reference frames. Bayerlein’s article discusses
some of the common misconceptions about mass and energy in special relativity.
15
Finally, a unique and delightful exploration of special relativity; elegant and witty, with
all of the relativity paradoxes you could want, carefully explained and diagrammed, with
many worked examples:
E. F. Taylor and J. A. Wheeler, Spacetime Physics, 2nd ed. (Freeman, 1992).
Materials for Active Engagement in the Classroom
A. Reading Quizzes
1. Which of the following is not a consequence of the postulates of special relativity?
(1) Clocks in motion appear to run slow.
(2) Objects appear shortened in their direction of motion.
(3) The velocity addition law allows relative velocities greater than the speed of
light under certain circumstances.
(4) The Doppler change in frequency does not distinguish between motion of the
source and motion of the observer.
2. If two observers are in relative motion (one moves relative to the other) with constant
relative velocity, in which of the following measurements would they obtain identical
values?
(1) The velocity of an electron.
(2) The speed of a light beam.
(3) The ticking rate of a clock.
(4) The volume of a box.
3. Consider 2 observers moving toward each other at high speed. One fires a light beam
toward the other at speed c. What speed v does the second observer measure for the
light beam?
(1) v > c
(2) v = c
(3) v < c
(4) Depends on magnitude and direction of relative speed of observers.
4. Observer O fires a particle at velocity v in the positive y direction. Observer O′, who
is moving relative to O with velocity u in the x direction, measures the y component
of the velocity of the same particle and obtains v′. How does the y component
measured by O′ compare with the y component measured by O?
(1) v′ > v
(2) v′ = v
(3) v′ < v
(4) v′ = 0
5. Two clocks in the reference frame of observer 1 are exactly synchronized. For other
observers in motion relative to observer 1, the clocks are:
(1) synchronized for all observers.
(2) not synchronized, but all observers will agree which of the two clocks is ahead.
(3) not synchronized, but different observers may not agree which of the clocks is
ahead.
(4) either synchronized or not synchronized, depending on the locations of the
observers.
16
6. In Tom's frame of reference, two events A and B take place at different locations
along the x axis but are observed by Tom to be simultaneous. Which of the
following statements is true? (Consider observer motion along the x axis only.)
(1) No observers moving relative to Tom will find A and B to be simultaneous,
but some may see A before B and others B before A.
(2) No observers moving relative to Tom will find A and B to be simultaneous,
but they all will observe events A and B in the same order.
(3) All observers moving relative to Tom will also perceive A and B to be
simultaneous.
(4) Some observers moving relative to Tom will find A and B to be simultaneous,
while others will not.
7. The quantity mc2 represents:
(1) the kinetic energy of a particle moving at speed c.
(2) the energy of a particle of mass m at rest.
(3) the total relativistic energy of a particle of mass m moving at speed c.
(4) the maximum possible energy of a moving particle of mass m.
8. Which one of the following statements is true?
(1) The laws of conservation of energy and momentum are not valid in special
relativity.
(2) The laws of conservation of energy and momentum are valid in special
relativity only if we use definitions of energy and momentum that differ
from those of classical physics.
(3) According to special relativity, particles have energy only if they are in motion.
(4) mc2 represents the energy of a particle moving at speed c.
Answers
1. 3
2. 2
3. 2
4. 3
5. 3
6. 1
7. 2
8. 2
B. Conceptual and Discussion Questions
1. Rockets A and C move with identical speeds in opposite directions relative to B, who
is at rest in this frame of reference. A, B, and C all carry identical clocks.
A
B
v
v
According to A:
(1) B's clock and C's clock run at identical slow rates.
(2) B's clock runs fast and C's clock runs slow.
(3) B's clock runs slow and C's clock runs even slower.
(4) B's clock runs fast and C's clock runs even faster.
(5) B's clock runs slow and C's clock runs fast.
17
C
2. Rockets A and C move with identical speeds v = 0.8c in opposite directions relative
to B, who is at rest in this frame of reference. A stick of length L0 carried by A has
length 0.6L0 according to B. What is the length of the stick according to C?
A
(1) L0
B
v
(2) 0.6L0
(3) 0.36L0
v
C
(4) 0.22L0
3. Three identical triplets Larry, Moe, and Curly are testing the predictions of special
relativity. Larry and Moe set out on round-trip journeys from Earth to distant stars.
Larry's star is 12 light-years from Earth (as measured in the Earth reference frame),
and he travels the round trip at a speed of 0.6c. Moe's star is 16 light-years from
Earth (also measured in the Earth frame), and he travels the round trip at a speed of
0.8c. Both journeys thus take a total of 40 years, as measured by Curly who stays
home on Earth. When Larry and Moe return, how do the ages of the triplets
compare?
(1) Larry = Moe > Curly (2) Moe < Larry < Curly (3) Larry < Moe < Curly
(4) Larry = Moe = Curly (5) Moe > Larry > Curly (6) Larry = Moe < Curly
4. A star (assumed to be at rest relative to the Earth) is 100 light-years from Earth. (A
light-year is the distance light travels in one year.) An astronaut sets out from Earth
on a journey to the star at a constant speed of 0.98c. (Note: At v = 0.98c,
1 − v 2 / c 2 = 0.20 )
(a) How long does it take for a light signal from Earth to reach the star, according to
an observer on Earth?
(1) 100 y (2) 98 y (3) 102 y (4) 20 y
(b) How long does it take for the astronaut to travel from Earth to the star, according
to an observer on Earth?
(1) 100 y (2) 98 y (3) 102 y (4) 20 y
(c) According to the astronaut, what is the distance from Earth to the star?
(1) 100 l.y. (2) 102 l.y. (3) 20 l.y. (4) 98 l.y.
(d) According to the astronaut, how long does it take for the astronaut to travel from
Earth to the star?
(1) 100 y (2) 102 y (3) 20 y (4) 20.4 y
(e) Light takes 100 years to travel from Earth to the star, but the astronaut makes the
trip in 20.4 y. Does that mean that the astronaut travels faster than light?
(1) Yes
(2) No
(3) Maybe
5. Two clocks, equidistant from O and at rest in the reference frame of O, start running
when they receive a flash of light from the light source midway between them.
According to O, the two clocks are synchronized (they start at the same time).
According to O′, who is moving with velocity u relative to O, clock 2 starts ahead of
clock 1 by an amount Δt′.
18
O2′
O′
u
u
O
O2
(a) Suppose there is a second observer O2 at rest with respect to O at a location
midway between the light source and clock 2. Will O2 conclude that the two clocks
are synchronized?
(1) Yes
(2) No
(3) Depends on location of O2.
(b) Suppose there is a second observer O2′ moving with the same speed u as O′. At
the instant shown, O2′ is slightly to the left of clock 1. What will O2′ conclude about
the synchronization of the two clocks?
(1) Clock 1 starts ahead of clock 2.
(2) Clock 2 starts ahead of clock 1 by a time that is smaller than Δt′.
(3) Clock 2 starts ahead of clock 1 by a time that is larger than Δt′.
(4) Clock 2 starts ahead of clock 1 by a time that is equal to Δt′.
6. In a certain collision process, particles A and B collide, and after the collision
particles C and D appear (C and D are different from A and B). Which quantities are
conserved in this collision?
(1) only linear momentum
(2) only total relativistic energy
(3) only mass and linear momentum (4) only linear momentum and kinetic energy
(5) only mass and kinetic energy
(6) only linear momentum and total relativistic energy
(7) only linear momentum, kinetic energy, and total relativistic energy
(8) linear momentum, kinetic energy, total relativistic energy, and mass
7. Two particles each of mass m are moving at speed v = 0.866c directly toward one
another. After the head-on collision, all that remains is a new particle of mass M.
What is the mass of this new particle? (Note: At v = 0.866c, 1 − v 2 / c 2 = 0.50 )
(1) M = 2m
(2) M = 4m
(3) M = m
(4) M = 1.5m
(5) None of these
Answers
1. 3
2. 4
3. 2
4. 1,3,3,4,2
19
5. 1,4
6. 6
7. 2
Sample Exam Questions
A. Multiple Choice
1. A certain particle at rest lives for 1.25 ns. When the particle moves through the
laboratory at a speed of 0.91c, what is its lifetime according to an observer in the
laboratory?
(a) 0.52 ns
(b) 3.01 ns
(c) 1.25 ns
(d) 7.27 ns
2. Two electrons, each with a kinetic energy of 2.52 MeV, collide head-on to produce a
new particle. What is the rest energy of this new particle?
(a) Zero
(b) 5.04 MeV
(c) 6.06 MeV
(d) 9.54 MeV
3. A newly created particle is moving through the laboratory at a speed of 0.765c. It is
observed to live for a time of 0.231 μs before decaying. What would be the lifetime
of this particle according to someone who is moving along with the particle at a speed
of 0.765c?
(a) 0.358 μs
(b) 0.149 μs
(c) 0.096 μs
(d) 0.557 μs
4. Tom fires a laser beam in the y direction of his coordinate system. Mary is moving
relative to Tom in the x direction with a speed of 0.65c. According to Mary, what is
the y component of the speed of Tom’s laser beam?
(a) c
(b) 0.89c
(c) 0.76c
(d) 0.35c
5. In Albert’s frame of reference, there is a stick of length LA at rest along the x axis.
Betty is traveling along the x axis in either the positive or negative direction. In
Betty’s frame of reference, the length of the stick is:
(b) always greater than LA
(c) always less than LA
(a) always equal to LA
(d) either greater than LA or less than LA, depending on the direction of Betty’s motion
6. Sitting in a chair in his laboratory, Albert observes a particle to be created at one
instant moving at a speed of 0.65c and to decay after a time interval of 5.75 ns. Betty
is moving along with the particle at a speed of 0.65c. What is the time between the
creation and decay of the particle according to Betty?
(a) 2.43 ns
(b) 4.37 ns
(c) 5.75 ns
(d) 7.57 ns
(e) 9.64 ns
7. What is the momentum of a proton that has a kinetic energy of 750 MeV?
(a) 750 MeV/c
(b) 1186 MeV/c
(c) 1404 MeV/c
(d) 1688 MeV/c
8. A certain particle at rest has a lifetime of 2.52 μs. What must be the speed of the
particle for its lifetime to be observed to be 8.34 μs?
(a) 0.953c
(b) 0.302c
(c) 0.913c
(d) 0.985c
(e) None of these
9. A particle moving through the laboratory at a speed of v = 0.878c is observed to have
a lifetime of 2.43 ns. If that particle had been produced at rest in the laboratory, what
would its lifetime be?
20
(a) 2.43 ns
(b) 5.08 ns
(c) 1.16 ns
(d) 1.89 ns
(e) 3.79 ns
10. An unstable particle moving through the laboratory leaves a track of length 3.52 mm.
The particle is moving at a speed of 0.943c. How long would the particle’s track
appear to someone moving with the particle?
(a) 1.17 mm (b) 10.6 mm (c) 3.52 mm
(d) 0.390 mm (e) None of these
11. Tom observes a blinking light bulb that is at rest in his reference frame. Mary is
moving relative to Tom at a speed of 0.735c. According to Mary, the light blinks on
for a time interval of 5.25 ms. What is the blinking interval according to Tom?
(a) 7.74 ms (b) 1.48 ms (c) 3.56 ms (d) 10.76 ms (e) 5.25 ms
12. A distant star is 4.8 light-years (l.y.) from Earth, according to observers on Earth. An
astronaut will travel to the star in a spaceship at a speed of 0.925c. During the
voyage, what distance does the astronaut measure between the Earth and the star?
(a) 4.8 l.y.
(b) 12.6 l.y. (c) 4.4 l.y.
(d) 1.8 l.y.
(e) 7.6 l.y.
13. An astronaut was told on Earth in 1993 that she had exactly 15 years to live. Starting
in 1993 she made a journey at a speed of 0.80c to a distant star and back. What is the
latest New Years Day she will be able to celebrate on Earth?
(a) 2002 (b) 2008 (c) 2011 (d) 2018 (e) 2032
14. A particle of mass m moving with speed v collides with a particle of mass 2m at rest.
The particles merge to form only a new particle of mass M that moves with speed V.
How is M related to m?
(a) M < 3m
(b) M = 3m
(c) M > 3m
15. A particle of mass M at rest decays into two identical particles each of mass m =
0.100M that travel in opposite directions. What is the speed of these particles?
(a) 0.98c
(b) 0.96c
(c) 0.50c
(d) 0.32c
16. A certain particle has a proper lifetime of 1.00 × 10-8 s. It is moving through the
laboratory at a speed of 0.85c. What distance does the particle travel in the
laboratory?
(a) 2.55 m
(b) 4.84 m
(c) 1.34 m
(d) 9.19 m
17. Two particles of the same mass m and moving at the same speed v collide head-on and
combine to produce only a new particle of mass M. Which of the following is
correct?
(a) M = 2m
(b) M < 2m
(c) M > 2m
18. Two particles each of mass m are each moving at a speed of 0.707c directly toward
one another. After the head-on collision, all that remains is a new particle of mass M.
What is the mass of this new particle?
(a) 0.5m
(b) 1.0m
(c) 2.0m
(d) 2.8m
(e) 4.0m
21
Answers
1. b
10. a
2. c
11. c
3. b 4. c
5. c
12. d 13. d 14. c
6. b
15. a
7. c
8. a
16. b 17. c
9. c
18. d
B. Conceptual
1. A particle of mass m is moving at a speed of v = 0.80c. It collides with and merges
with another particle of the same mass m that is initially at rest. Is the mass of the
resulting combined particle greater than, less than, or equal to 2m? EXPLAIN
YOUR ANSWER.
2. A particle of mass M moving with velocity v decays into two photons of energies E1
and E2. Is the rest energy of the original particle equal to E1 + E2, less than E1 + E2,
or greater than E1 + E2? EXPLAIN YOUR ANSWER.
3. Particle X1 of mass m1 is moving with speed v1 > 0.5c and kinetic energy K1. It
collides with particle X2 of mass m2 that is initially at rest. The collision produces
ONLY a new particle X3 of mass m3 and kinetic energy K3 (that is, X1 + X2 → X3). Is
m3 greater than, less than, or equal to the sum of m1 + m2? EXPLAIN YOUR
ANSWER.
4. Two spaceships A and B are approaching a space station from opposite directions.
An observer on the station reports that both ships are approaching the station at the
same speed v. According to classical physics, each ship would see the other moving
at a speed of 2v. According to special relativity, does each ship sees the other moving
at a speed that is greater than 2v, less than 2v, or equal to 2v? EXPLAIN YOUR
ANSWER.
Answers
1. greater than
2. less than
3. greater than
4. less than
C. Problems
1. A photon of energy 1.52 MeV collides with and scatters from an electron that is
initially at rest. After the collision, the electron is observed to be moving with a speed
of 0.937c at an angle of 64.1° relative to its original direction.
(a) Find the energy of the scattered photon.
(b) Find the direction of the scattered electron.
2. A particle of rest energy 547 MeV is moving in the x direction with a speed of 0.624c.
It decays into 2 new particles, each of rest energy 106 MeV. One of the decay particles
has a kinetic energy of 301 MeV and is moving at an angle of 38o relative to the x axis.
(a) What is the kinetic energy of the second decay particle?
(b) What is the direction of the second decay particle relative to the x axis?
22
3. Particle A has a rest energy of 1192 MeV and is moving
through the laboratory in the positive x direction with a
speed of 0.45c. It decays into particle B (rest energy =
1116 MeV) and a photon; particle A disappears in the
decay process. Particle B moves at a speed of 0.40c at an
angle of 3.03o with the positive x axis. The photon moves
in a direction at an angle θ with the positive x axis.
(a) Find the energy of the photon.
(b) Find the angle θ.
photon
A
0.45c
θ
3.03o
0.40c
B
4. A star is at rest relative to the Earth and at a distance of 1500 light-years. An
astronaut wishes to travel from Earth to the star and age no more than 30 years during
the entire round-trip journey.
(a) Assuming that the journey is made at constant speed and that the acceleration and
deceleration intervals are very short compared with the rest of the journey, what speed
is necessary for the trip?
(b) According to the astronaut, what is the distance from Earth to the star?
(c) According to someone on Earth, how long does it take the astronaut to make the
round trip?
(d) It takes light 1500 years to travel from Earth to the star, but the astronaut makes
the trip in 15 years. Does this mean that the astronaut travels faster than light?
Explain your answer.
5. A particle of mass M is moving in the positive x direction with speed v. It
spontaneously decays into 2 photons, with the original particle disappearing in the
process. One photon has energy 233 MeV and moves in the positive x direction, and
the other photon has energy 21 MeV and moves in the negative x direction.
(a) What is the total relativistic energy of the particle before its decay?
(b) What is the momentum of the particle before its decay?
(c) Find the mass M of the particle, in units of MeV/c2.
(d) Find the original speed of the particle, expressed as a fraction of the speed of light.
6. In your laboratory, you observe particle A of mass 498 MeV/c2 to be moving in the
positive x direction with a speed of 0.462c. It decays into 2 particles B and C, each of
mass 140 MeV/c2. Particle B moves in the negative x direction with a speed of 0.591c.
(a) Find the relativistic total energy of each of the three particles.
(b) Find the velocity (magnitude and direction) of particle C.
(c) Your laboratory supervisor is watching this experiment from a spaceship that is
moving in the positive x direction with a speed of 0.635c. What values would your
supervisor measure for the velocities of particles B and C?
7. The pi meson is a particle that has a rest energy of 135 MeV. It decays into two
gamma-ray photons and no other particles. (The pi meson disappears after the decay.)
Suppose a pi meson is moving through the laboratory in the positive x direction at a
speed of v = 0.90c. One of the decay photons moves in the positive x direction and
23
the other in the negative x direction.
(a) What are the applicable conservation laws in this problem? Set up the equations for
each applicable conservation law using the numerical values for this problem. THE
ONLY UNKNOWNS IN YOUR EQUATIONS SHOULD BE THE ENERGIES OF
THE TWO PHOTONS. Other than the unknown energies, all numerical factors in each
equation should be evaluated. You don’t need to solve the equations, just set them up.
(b) One of the photons has energy 15.5 MeV. Find the energy of the other photon,
and show how all applicable conservation laws are satisfied.
(c) What are the speeds of the two photons in the rest frame of the pi meson and in the
laboratory frame of reference? Explain your answer.
8. A pi meson (rest energy = 140 MeV) is moving through the laboratory with a kinetic
energy of 405 MeV.
(a) Expressed as a fraction of the speed of light, what is the speed of the pi meson?
(b) At this speed, how long a track will the pi meson leave in the laboratory during its
lifetime? The lifetime of a pi meson at rest in the laboratory is 1.0 × 10-16 s.
9. A particle of rest energy 266.0 MeV is moving, according to a laboratory observer, in
the x direction with a speed of 0.720c. It decays into 2 photons. Photon 1 has an
energy of 260.6 MeV and travels at an angle of 26.2° with the direction of the motion
of the original particle.
(a) Find the energy and direction of photon 2 in this frame of reference.
(b) A second observer is moving at a speed of 0.720c, so that the original particle
appears to be at rest. According to this observer, what are the energy and direction of
travel of photon 1?
10. A pi meson (m = 135 MeV/c2) moving through the laboratory at a speed of v = 0.998c
decays into two gamma-ray photons. The two photons have equal energies Eγ and
move at equal angles θ on opposite sides of the direction of motion of the original pi
meson. Find Eγ and θ.
11. Space pilot Jim measures the length of his space ship to be 2450 m. The ship drifts at
a constant velocity of 0.740c past a space platform from which Mary (at rest on the
platform) observes its passage.
(a) What is the length of the space ship according to Mary?
(b) According to Mary, what is the time interval between the bow (front) of the ship
passing her and the stern (rear) of the ship passing her?
(c) According to Jim, what is the time interval between the bow (front) of the ship
passing Mary and the stern (rear) of the ship passing her?
Answers
1. (a) 0.568 MeV (b) -21.9°
2. (a) 187 MeV (b) 62.3°
3. (a)117 MeV (b) 12.7°
4. (a) 0.99995c (b) 15 l.y. (c) 3000.15 y (d) no
5. (a) 254 MeV (b) 212 MeV/c (c) 140 MeV/c2 (d) 0.834c
24
6. (a) 561.5 MeV, 173.6 MeV, 388.0 MeV (b) +0.933c (c) -0.891c, +0.731c
7. (a) E1 + E2 = 310 MeV, E1 − E2 = 279 MeV (b) 294.5 MeV (c) c
8. (a) 0.966c (b) 0.113 μm
9: (a) 122.7 MeV, -69.7° (b) 133.0 MeV, 60.0°
10. 1069 MeV, 3.6°
11. (a) 1650 m (b) 7.4 μs (c) 11 μs
25
Problem Solultions
1. Your air speed in still air is (750 km)/(3.14 h) = 238.8 km/h. With the nose of the
plane pointed 22° west of north, you would be traveling at this speed in that direction
if there were no wind. With the wind blowing, you are actually traveling due north at
an effective speed of (750 km)/(4.32 h) = 173.6 km/h. The wind must therefore have
a north-south component of (238.8 km/h)(cos 22°) − 173.6 km/h = 47.8 km/h (toward
the south) and an east-west component of (238.8 km/h)(sin 22°) = 89.5 km/h (toward
the east). The wind speed is thus
v = (47.8 km/h)2 + (89.5 km/h)2 = 101 km/h
in a direction that makes an angle of
θ = tan −1
2. (a)
3.
89.5 km/h
= 62° east of south
47.8 km/h
95 m
= 179 s
0.53 m/s
(b)
95 m
= 54 s
1.24 m/s + 0.53 m/s
(c)
95 m
= 49 s
2.48 m/s − 0.53 m/s
Δt = tup + tdown − 2tacross =
Assuming u
⎤
2L ⎡
1
1
−
⎢
⎥
2
2
c ⎣1 − u / c
1 − u 2 / c2 ⎦
c,
1
u2
≅
+
1
c2
1 − u 2 / c2
and
1
1 − u 2 / c2
≅ 1+
1 u2
2 c2
Δt ≅
2 L ⎡ u 2 ⎛ 1 u 2 ⎞ ⎤ Lu 2
⎢1 + − ⎜1 +
⎟⎥ =
c ⎣ c 2 ⎝ 2 c 2 ⎠⎦ c3
u=
c 3 Δt
(3 ×108 m/s)3 (2 × 10−15 s)
=
= 7 × 104 m/s
L
11 m
26
4.
(a)
u = 100 km/h = 28 m/s
1 − u 2 / c2 ≅ 1 −
c
1 u2
1 (28 m/s) 2
=
−
= 1 − 4.3 × 10−15
1
2 c2
2 (3 ×108 m/s) 2
L = L0 1 − u 2 / c 2 = L0 (1 − 4.3 × 10−15 )
L0 − L = (4.3 × 10−15 ) L0 = (4.3 × 10−15 )(5 × 106 m) = 2.1× 10−8 m
This is less than the wavelength of light.
(b)
Δt =
Δt0
1− u / c
2
2
≅
Δt0
≅ Δt0 (1 + 4.3 × 10−15 )
−15
1 − 4.3 ×10
Δt − Δt0 = (4.3 ×10−15 )Δt0 = (4.3 × 10−15 )(50 h)(3600 s/h) = 7.7 × 10−10 s
5.
With L = 12 L0 , the length contraction formula gives
1
2
L0 = L0 1 − u 2 / c 2 , so
u = 3 / 4 c = 2.6 × 108 m/s
6.
The astronaut must travel 400 light-years at a speed close to the speed of light and
must age only 10 years. To an Earth-bound observer, the trip takes about Δt =
400 years, but this is a dilated time interval; in the astronaut’s frame of reference,
the elapsed time is the proper time interval Δt0 of 10 years. Thus, with
Δt = Δt0 / 1 − u 2 / c 2 ,
400 years =
10 years
or
1 − u 2 / c2
u 2 ⎛ 10 ⎞
1− 2 = ⎜
⎟
c
⎝ 400 ⎠
2
u = 1 − (10 / 400) 2 c = 0.9997c
7.
Δt0
Δt =
(b)
d = v Δt = 0.960(3.00 × 108 m/s)(357.1× 10−9 s) = 103 m
(c)
d 0 = v Δt0 = 0.960(3.00 × 108 m/s)(100.0 × 10−9 s) = 28.8 m
1 − u 2 / c2
=
100.0 ns
(a)
1 − (0.960) 2
27
= 357.1 ns
8.
In the laboratory reference frame, the lifetime is
1.25 mm
d
=
= 0.418 ×10−11 s
8
×
0.995(3.00
10
m/s)
u
Δt =
Δt0 = Δt 1 − u 2 / c 2 = (0.418 × 10−11 s) 1 − (0.995) 2 = 4.17 × 10−13 s
9. From Equation 2.15, Δt1 = L /(v − u ) , and from Equation 2.16, Δt2 = L /(c + u ) .
Δt = Δt1 + Δt2 =
Δt0
L
L
+
=
v−u c+u
1 − u 2 / c2
With Δt0 = L0 / v′ + L0 / c and L = L0 1 − u 2 / c 2 , this becomes
1
1
1
⎛ 1 1⎞
+
=
+ ⎟
2
2 ⎜
v − u c + u 1 − u / c ⎝ v′ c ⎠
Solving for v, we obtain
v=
10.
v′ + u
1 + v′u / c 2
Let ship A represent observer O, and let observer O′ be on Earth. Then v′ = 0.851c
and u = −0.753c, and so
v=
v′ + u
0.851c + 0.753c
=
= 0.978c
2
1 + v′u / c 1 + (0.851)(0.753)
If now ship B represents observer O, then v′ = −0.753c and u = −0.851c.
v=
v′ + u
−0.753c − 0.851c
=
= −0.978c
2
1 + v′u / c 1 + (−0.753)(−0.851)
11. Let O′ be the observer on Earth, and let O be the observer on ship B. Then v′ =
0.826c and u = −0.635c.
v=
v′ + u
0.826c − 0.635c
=
= 0.402c
2
1 + v′u / c 1 + (0.826)(−0.635)
28
12.
(a) With f ′ = f (1 − u / c) /(1 + u / c) and λ = c / f , we obtain
λ′ = λ
1+ u / c
1− u / c
or
366 nm = 122 nm
1+ u / c
1− u / c
Solving, we get u/c = 0.800 or u = 2.40 × 108 m/s.
(b) λ ′ = λ
13.
1− u / c
1 − 0.800
= 122 nm
= 40.7 nm
1+ u / c
1 + 0.800
With f ′ = f (1 − u / c) /(1 + u / c) and λ = c / f , we obtain
2
2
2
1 − u / c ⎛ f ′ ⎞ ⎛ λ ⎞ ⎛ 650 nm ⎞
=⎜ ⎟ =⎜ ⎟ =⎜
⎟ = 1.397
1 + u / c ⎝ f ⎠ ⎝ λ ′ ⎠ ⎝ 550 nm ⎠
Solving, u/c = 0.166 or u = 5. 0 × 107 m/s.
dx′ =
14.
v′x =
dx − u dt
1 − u 2 / c2
and
dt ′ =
dt − u dx / c 2
1 − u 2 / c2
vx − u
dx′
dx − u dt
dx / dt − u
=
=
=
2
2
dt ′ dt − u dx / c 1 − u (dx / dt ) / c 1 − uvx / c 2
With dz ′ = dz , we obtain
v′z =
15.
dz ′
dz
(dz / dt ) 1 − u 2 / c 2 vz 1 − u 2 / c 2
=
=
=
1 − uvx / c 2
1 − uvx / c 2
dt ′ (dt − u dx / c 2 ) / 1 − u 2 / c 2
For the light beam, observer O measures vx = 0, vy = c. Observer O′ measures
vy 1 − u 2 / c2
vx − u
v′x =
= 0 − u = −u and v′y =
= c 1 − u 2 / c2
1 − uvx / c 2
1 − uvx / c 2
According to O′, the speed of the light beam is
v′ = (v′x ) 2 + (v′y ) 2 = u 2 + c 2 (1 − u 2 / c 2 ) = c
29
16. O measures times t1 and t2 for the beginning and end of the interval, while O′
measures t1′ and t2′ . Using Equation 2.23d,
t1′ =
t1 − ux / c 2
1 − u 2 / c2
and
t2′ =
t2 − ux / c 2
1 − u 2 / c2
The same coordinate x appears in both expressions, because the bulb is at rest
according to O (so Δt is the proper time interval). Subtracting these two equations,
we obtain
t2′ − t1′ =
t2 − t1
1 − u 2 / c2
or
Δt ′ =
Δt
1 − u 2 / c2
17. Suppose observer O is moving with the K meson; to this observer, the K meson
appears to be at rest, and so O measures v1 = +0.828c and v2 = −0.828c for the two π
mesons. Observer O′ is moving relative to O with a velocity u = −0.486c; in the
reference frame of O′, observer O and the K meson are moving in the positive x
direction with a velocity of 0.486c. We can use the Lorentz velocity transformation
(Equation 2.28a) to find the velocities of the two π mesons according to O′:
v1′ =
v1 − u
+0.828c − ( −0.486c )
=
= +0.937c
2
1 − v1u / c
1 − (0.828)( −0.486)
v2′ =
v2 − u
−0.828c − ( −0.486c )
=
= −0.572c
2
1 − v2 u / c
1 − ( −0.828)( −0.486)
18. Imagine the rod to be the hypotenuse of a right triangle having sides Lx along the x
axis and Ly in the y direction. According to O′, the length Lx is shortened by the
length contraction, but the length Ly is unaffected because it is perpendicular to the
direction of motion. For O, Ly = Lx tan 31° , while for O′, L′y = Lx′ tan 46° where
Lx′ = Lx 1 − u 2 / c 2 .
Because Ly = L′y , we have
Lx tan 31° = Lx′ tan 46° = Lx 1 − u 2 / c 2 tan 46°
or
u = c 1 − (tan 31°) /(tan 46°) = 0.648c
19. (a) Changing the coordinates in Equation 2.23d to intervals, we have
30
Δt ′ =
Δt − u Δx / c 2
1− u / c
2
2
=
0.465 μs − (0.762)(53.4 m) /(300 m/μ s)
1 − (0.762) 2
= +0.508 μ s
(b) Changing coordinates to intervals in Equation 2.23a,
Δx′ =
Δx − u Δt
1 − u 2 / c2
=
53.4 m − (0.762 × 300 m/μ s)(0.465 μ s)
1 − (0.762) 2
= −81.5 m
The negative sign of Δx′ indicates that O′ finds the two events in inverted locations
compared with O; for example, if O finds that event 1 occurs at a smaller x coordinate
than event 2, then O′ finds that event 1 occurs at a larger x′ coordinate than event 2.
That is, O sees event 1 to the left of event 2, while O′ sees event 1 to the right of
event 2. Note than both observers find the time interval to be positive – event 2
occurs after event 1 to both observers.
20. From Equation 2.23d written in terms of intervals, for O′ to find Δt′ = 0, it must be
true that Δt − (u / c 2 )Δx = 0 . Thus
(300 m/μ s)(0.138 μs − 0.124 μ s)
c 2 Δt
=c
= +0.32c
u=
Δx
(23.6 m − 10.4 m)
21.
(a) In your frame of reference on the plane, the distance between Los Angeles and
Boston is contracted to (3000 mi) 1 − [(600 mi/h)/(1000 mi/h)]2 = 2400 mi , and you
measure the time for the trip to be (2400 mi)/(600 mi/h) = 4 h. So your watch reads
2:00 pm.
(b) According to an observer on the ground, the trip takes (3000 mi)/(600 mi/h) = 5 h.
So the airport clock reads 3:00 pm.
(c) The return trip again takes 4 h as measured in your frame of reference and 5 h
from the frame of reference of the ground. When you depart Boston, the airport clock
reads 10:00 am but your watch reads 9:00 am, so when you land in Los Angeles, your
watch reads 1:00 pm and the airport clock reads 3:00 pm.
This analysis duplicates the result of the twin paradox: If your twin wearing an
identical watch had remained at the Los Angeles airport, all observers would agree
that you were 2 hours younger than your twin.
22.
(a) On the outward journey at 0.60c, the rate at which signals are received is
f′= f
1− u / c
1 − 0.60
= (1/ year)
= 0.5 / year
1+ u / c
1 + 0.60
(b) During the return journey,
31
f′= f
1+ u / c
1 + 0.60
= (1/ year)
= 2 / year
1− u / c
1 − 0.60
(c) According to Casper, Amelia’s outward journey lasts 16 years (it is 16 years
before he sees her arrive at the planet), during which he receives 8 signals (0.5/year ×
16 years). Her total journey lasts 20 Earth years, so the return journey lasts 4 Earth
years, during which he receives 8 signals (2/year × 4 years). Thus Casper receives 16
signals (8 during the outward trip and 8 during the return) and concludes that his
sister has aged 16 years.
23.
According to Amelia, the distance to the star is shortened to
L = L0 1 − v 2 / c 2 = (8.0 l-y) 1 − (0.80) 2 = 4.8 l-y
and at a speed of 0.80c Amelia’s travel time to the star is (4.8 l-y)/(0.80c) = 6.0 y.
The total round-trip time in Amelia’s frame of reference is 12 years, so she is 8 years
younger than her brother when she returns.
24. (a)
20
15
Time
(years)
10
5
Casper’s
worldline
Amelia’s worldline
0
5
10
Distance (light-years)
32
(b) 16 years
(c) 4 years
25.
m1c 2
K i′ = K1i′ + K 2i′ =
(a)
=
(2m)c 2
1− 0
2
1 − v′ / c
2
1i
− m1c +
2
1 − v′ / c
2
2i
mc 2
− (2m)c 2 +
1 − (0.750)
m1c 2
K f′ = K1f′ + K 2f′ =
m2 c 2
2
1 − v′ / c
− m2 c 2
2
− mc 2 = 0.512mc 2
2
m2 c 2
− m1c 2 +
− m2 c 2
1 − v′ / c
(2m)c
mc 2
=
− (2m)c 2 +
− mc 2 = 0.512mc 2
2
2
1 − (−0.585)
1 − (0.294)
2
1f
2
2
2f
2
2
m1c 2
K i = K1i + K 2i =
(b)
=
1− v / c
2
1i
(2m)c 2
1 − (0.550)
2
− m1c +
2
1 − (−0.340)
m1c 2
1− v / c
1− v / c
2
2i
mc 2
− (2m)c 2 +
K f = K1f + K 2f =
m2 c 2
2
− m1c 2 +
2
2
− m2 c 2
− mc 2 = 0.458mc 2
m2 c 2
− m2 c 2
1− v / c
(2m)c
mc 2
=
− (2m)c 2 +
− mc 2 = 0.458mc 2
2
2
1 − (−0.051)
1 − (0.727)
2
1f
2
2
2f
2
2
26.
p=
mv
1 − v2 / c2
K=
=
1 (mc 2 )(v / c) 1 (938.3 MeV)(0.756)
=
= 1084 MeV/c
c 1 − v2 / c2 c
1 − (0.756) 2
mc 2
1 − v2 / c2
− mc 2 =
938.3 MeV
1 − (0.756) 2
− 938.3 MeV = 495 MeV
E = K + mc 2 = 495 MeV + 938.3 MeV = 1433 MeV
27.
E = K + mc 2 = 1.264 MeV + 0.511 MeV = 1.775 MeV
Solving Equation 2.36 for v, we obtain
2
2
⎛ mc 2 ⎞
⎛ 0.511 MeV ⎞
v = c 1− ⎜
⎟ = c 1− ⎜
⎟ = 0.958c
⎝ E ⎠
⎝ 1.775 MeV ⎠
33
28.
29.
dp
dx
dx = ∫ dp
= v dp
dt
dt ∫
v
v
v
mv 2
mv
−∫
K = ∫ v dp = pv − ∫ p dv =
dv
2
2
0
0
0
1− v / c
1 − v2 / c2
mv 2
mc 2
=
+ mc 2 1 − v 2 / c 2 − mc 2 =
− mc 2
2
2
2
2
1− v / c
1− v / c
W = ∫ F dx = ∫
For what range of velocities is K − 12 mv 2 ≤ 0.01K ? At the upper limit of this range,
where K − 12 mv 2 = 0.01K , we have
⎛
⎞
mc 2
0.99 K = 0.99 ⎜
− mc 2 ⎟ = 12 mv 2
2
2
⎝ 1− v / c
⎠
1
0.5 ⎞
⎛ 1
⎞
⎛
− 1⎟ = 12 x which gives
= ⎜1 +
x⎟
With x = v 2 / c 2 , 0.99 ⎜
1 − x ⎝ 0.99 ⎠
⎝ 1− x ⎠
1 = (1 − x)(1 + 1.0101x + 0.2551x 2 )
2
0.2551x 2 + 0.7550 x − 0.0101 = 0
or
Solving using the quadratic formula, we find x = 0.0133 or -2.97. Only the positive
solution is physically meaningful, so
v = 0.0133 c = 0.115c
That is, for speeds smaller that 0.115c, the classical kinetic energy is accurate to within 1%.
For a different approach to that same type of calculation, see Problem 32.
30. As in Problem 29, let us now find the lower limit on the momentum such that
( pc) 2 + ( mc 2 ) 2 − pc ≤ 0.01 ( pc) 2 + (mc 2 ) 2
From the lower limit, we obtain 0.99 ( pc) 2 + (mc 2 ) 2 = pc , which can be written as
( pc) 2 =
m2c 4
1/(0.99) 2 − 1
or
pc = 7.02mc 2
With mvc / 1 − v 2 / c 2 = 7.02mc 2 , we obtain
⎛ v2 ⎞
v2
=
49.25
⎜1 − 2 ⎟
c2
⎝ c ⎠
or
34
v / c = 0.990
Whenever v / c ≥ 0.990 , the expression E = pc will be accurate to within 1%.
31.
E2 =
2
2
2
2
(mc 2 ) 2
m2c 2v 2
2 2 ⎛ 1− v / c + v / c ⎞
2 2
=
(
mc
)
=
(
mc
)
+
= (mc 2 ) 2 + ( pc) 2
⎜
⎟
2
2
2
2
2
2
1− v / c
1− v / c
1− v / c
⎝
⎠
E = (mc 2 ) 2 + ( pc) 2
32.
With
2
1 v 2 (−1/ 2)(−3 / 2) ⎛ v 2 ⎞
= 1+
+
⎜ 2⎟ +
2 c2
2
1 − v2 / c2
⎝c ⎠
1
, we have
⎛
⎞
⎛ 1 v2 3 v4
1
K = mc 2 ⎜
− 1⎟ = mc 2 ⎜ 1 +
+ 4+
2
2
2
2
c
8c
1
−
v
/
c
⎝
⎝
⎠
so K ≅ 12 mv 2 when v
⎞
⎛ 3 v2
− 1⎟ = 12 mv 2 ⎜1 +
+
2
⎠
⎝ 4c
c . The correction term is 3v 2 / 4c 2 , which has the value
0.01% when 3v 2 / 4c 2 = 0.0001 , or
v = 0.0001(4 / 3) c = 0.0115c
33. (a) With E = 1125 MeV and pc = 817 MeV, Equation 2.39 gives
m=
1
c2
E 2 − ( pc) 2 =
1
(1125 MeV) 2 − (817 MeV) 2 = 773 MeV/c 2
2
c
(b) E = ( pc) 2 + (mc 2 ) 2 = (953 MeV)2 + (773 MeV) 2 = 1227 MeV
34.
K f − K i = ( Ef − mc 2 ) − ( Ei − mc 2 ) = Ef − Ei
=
35.
mc 2
1− v / c
2
f
2
−
mc 2
1− v / c
2
i
2
=
0.511 MeV
1 − (0.91)
2
−
0.511 MeV
1 − (0.81) 2
ΔE = mc ΔT = (1 g)(0.40 J/g ⋅ K)(100 K) = 40 J
Δm =
ΔE
40 J
=
= 4.4 ×10−16 kg
2
16
2 2
9 ×10 m /s
c
36. (a) At such low speed, the classical approximation is valid.
35
= 0.361 MeV
⎞
⎟
⎠
⎛ v2 ⎞
K = 12 mv 2 = 12 mc 2 ⎜ 2 ⎟ = 12 (0.511 MeV)(1.00 × 10-4 ) 2 = 2.56 × 10−3 eV
⎝c ⎠
(b) The relativistic expression gives
⎛
⎞
⎛
⎞
1
1
− 1⎟ = 0.511 MeV ⎜
− 1⎟ = 25.6 eV
K = mc 2 ⎜
2
2
⎜ 1 − (0.01) 2
⎟
⎝ 1− v / c
⎠
⎝
⎠
For this speed, the classical expression 12 mv 2 also gives 25.6 MeV, so the two
calculations agree to at least three significant figures. (Actually they agree to four
significant figures, but not to five.)
(c) The relativistic expression gives
⎛
⎞
⎛
⎞
1
1
− 1⎟ = 0.511 MeV ⎜
− 1⎟ = 24.7 keV
K = mc 2 ⎜
2
2
⎜ 1 − (0.3) 2
⎟
⎝ 1− v / c
⎠
⎝
⎠
For this speed, the classical expression gives 23.0 keV, which is incorrect by about
7%.
⎛
⎞
⎛
⎞
1
1
(d) K = mc 2 ⎜
− 1⎟ = 0.511 MeV ⎜
− 1⎟ = 10.9 MeV
2
2
2
⎜
⎟
⎝ 1− v / c
⎠
⎝ 1 − (0.999)
⎠
37.
Because the electrons and the protons have charges of the same magnitude e, after
acceleration through a potential difference of magnitude ΔV = 10.0 million volts (a
positive difference for the electron, a negative difference for the proton), each loses
potential energy of ΔU = −e ΔV = -10.0 MeV and thus each acquires a kinetic energy
of K = +10.0 MeV. For the electron, E = K + mc2 = 10.0 MeV + 0.511 MeV = 10.5
MeV. The momentum is then
p=
1
1
E 2 − (mc 2 ) 2 =
(10.5 MeV) 2 − (0.511 MeV) 2 = 10.5 MeV/c
c
c
The classical formula K = p 2 / 2m gives
p = 2mK = 2(0.511 MeV/c 2 )(10.0 MeV) = 3.20 MeV/c
36
which is far from the correct result (a discrepancy we would expect for such highly
relativistic electrons). For the protons, E = K + mc2 = 10.0 MeV + 938.3 MeV= 948.3
MeV, and the momentum is
p=
1
1
E 2 − (mc 2 ) 2 =
(948.3 MeV) 2 − (938.3 MeV) 2 = 137.4 MeV/c
c
c
The classical formula gives
p = 2mK = 2(938.3 MeV/c 2 )(10.0 MeV) = 137.0 MeV/c
The difference between the classical and relativistic formulas appears only in the
fourth significant figure.
38.
The mass of a uranium atom is about (235 u)(1.66 × 10−27 kg/u) = 3.90 × 10−25 kg, so
1.00 kg contains 1.00 kg/3.90 × 10−25 kg = 2.56 × 1024 atoms. The total energy
released is
ΔE = (200 MeV/atom)(2.56 × 1024 atoms) = 5.12 × 1026 MeV
and the change in mass is
Δm =
ΔE (5.12 × 1026 MeV)(1.602 ×10−13 J/MeV)
=
= 9.14 × 10−4 kg
2
8
2
(2.998 × 10 MeV)
c
About one gram of matter vanishes for each kilogram that is fissioned!
39.
(a)
E = Eπ + Ep =
mπ c 2
1− v / c
2
2
+ mpc 2 =
139.6 MeV
1 − (0.906) 2
+ 938.3 MeV = 1268.1 MeV
(b)
p = pπ + pp =
mπ v
1 − v 2 / c2
=
1 mπ c 2 ( v / c ) 1 (139.6 MeV)(0.906)
=
= 298.8 MeV / c
c 1 − v 2 / c2 c
1 − (0.906) 2
(c)
mc 2 = E 2 − ( pc ) 2 = (1268.1 MeV) 2 − (298.8 MeV) 2 = 1232 MeV
40.
Before the collision, the total relativistic energy of each electron is
37
me c 2
Ee =
1− v / c
2
2
=
0.511 MeV
1 − (0.99999) 2
= 114.3 MeV
The total energy in the collision is therefore 2×114.3 MeV = 228.6 MeV. The total
momentum is zero before the collision, because the two particles moves with equal
and opposite velocities and have equal masses. After the collision, the total
momentum is still zero, so we know that the two muons must move with equal speeds
and thus have equal energies. The total energy of each muon is then 114.3 MeV and
its kinetic energy is
K μ = Eμ − mμ c 2 = 114.3 MeV − 105.7 MeV = 8.6 MeV
41. The two protons have equal (and opposite) momenta and thus equal energies E1 and
E2. The new particle is created with zero momentum (at rest), so its total energy is
equal to its rest energy Mc2 = 9700 MeV. Conservation of energy then gives
E1 + E2 = Mc 2 , so E1 = E2 = Mc 2 / 2 .
E1 =
mp c 2
1 − v2 / c2
=
Mc 2
2
2
2
2
v 2 ⎡ 2(mp c ) ⎤ ⎡ 2(938.3 MeV) ⎤
1− 2 = ⎢
⎥ =⎢
⎥ = 0.0374
2
c
⎢⎣ Mc ⎦⎥ ⎣ 9700 MeV ⎦
so
v = 0.981c
42. For particle 1, moving in the positive x direction,
E1 = K1 + mc 2 = 282 MeV + 140 MeV = 422 MeV
cp1 = E12 − (mc 2 ) 2 = (422 MeV) 2 − (140 MeV) 2 = +398 MeV
For particle 2, moving in the negative x direction,
E2 = K 2 + mc 2 = 25 MeV + 140 MeV = 165 MeV
cp2 = − E22 − (mc 2 ) 2 = − (165 MeV) 2 − (140 MeV) 2 = −87 MeV
The net final momentum is pf = p1 + p2 = 398 MeV/c − 87 MeV/c = 311 MeV/c , and
the net final energy is Ef = E1 + E2 = 422 MeV + 165 MeV = 587 MeV . Because of
the conservation laws, these must be equal to the momentum and the energy of the
initial particle, so that its rest energy is then
mi c 2 = Ei2 − (cpi ) 2 = (587 MeV) 2 − (311 MeV)2 = 498 MeV
38
Solving Equation 2.36 for v, we obtain
2
2
⎛ mc 2 ⎞
⎛ 498 MeV ⎞
v = c 1− ⎜
⎟ = c 1− ⎜
⎟ = 0.529c
⎝ E ⎠
⎝ 587 MeV ⎠
pc =
43.
(mc 2 )(v / c)
1 − v2 / c2
v
( pc / mc 2 ) 2
(3094 MeV/105.7 MeV) 2
=
=
= 0.99942
c
1 + ( pc / mc 2 ) 2
1 + (3094 MeV/105.7 MeV) 2
Δt =
Δt0
1− v / c
2
2
2.198 μ s
=
1- (0.99942) 2
( pc) 2 = E 2 − (mc 2 ) 2 = ( K + mc 2 ) 2 − (mc 2 ) 2 = K 2 + 2 Kmc 2
44.
K2
p = 2 Km + 2
c
2
45.
= 64.38 μ s
so
p2
K
= m+ 2
2K
2c
(a) If the astronaut travels at speed v for a distance d = 200 ly in the reference frame
of Earth, then in the spacecraft reference frame the distance to the star is
d 1 − v 2 / c 2 and the time T for the astronaut to reach the star (which must be 10 years
in the spacecraft frame of reference) is
d 1 − v2 / c2
=T
v
1 − v2 / c2 = v
or
T v cT
=
d c d
Solving, we find
v=c
1
1
=c
= 0.99875c
2
1 + (Tc / d )
1 + (10 / 200) 2
(b) According to an observer on Earth, the astronaut travels a total distance of 400 ly
at a speed of 0.99875c, so the total time for the round trip is (400 ly)/0.99875c 400.5
y.
46.
t1′ =
t1 − (u / c 2 ) x1
1 − u 2 / c2
and
39
t2′ =
t2 − (u / c 2 ) x2
1 − u 2 / c2
t2 − t1
t2′ − t1′ =
1 − u 2 / c2
−
(u / c 2 )( x2 − x1 )
1 − u 2 / c2
In the O frame of reference, the “cause” can travel to the “effect” with a speed
that can be no greater than c; that is, ( x2 − x1 ) /(t2 − t1 ) ≤ c , or ( x2 − x1 ) ≤ c(t2 − t1 ) .
Substituting for ( x2 − x1 ) in the second term, we obtain
t2 − t1
t2′ − t1′ ≥
1 − u 2 / c2
−
(u / c)(t2 − t1 )
1 − u 2 / c2
= (t2 − t1 )
1− u / c
1 − u 2 / c2
≥0
47. For the red flash, x1 = 0 at t1 = 0, so x1′ = 0 and t1′ = 0. For the blue flash, which occurs
at
x2 = 3.26 km and t2 = 7.63 μ s,
x2′ =
t2′ =
48.
x2 − ut2
1− u / c
2
2
t2 − (u / c 2 ) x2
1− u / c
2
3.26 km − (0.625c)(7.63 μ s)
=
2
1 − (0.625) 2
=
= 2.34 km
7.63 μ s − (0.625 / 0.300 km/μs)(3.26 km)
1 − (0.625) 2
= 1.07 μs
Let O′ be the observer on ship A, traveling at u = 0.60c relative to the space station.
Observer O on the space station measures vBx = 0, vBy = 0.50c for ship B. According
to O′,
vBx − u
0 − 0.60c
′ =
vBx
=
= −0.60c
2
1 − vBxu / c
1− 0
′ =
vBy
vBy 1 − u 2 / c 2
1 − vBx u / c 2
0.50c 1 − (0.60) 2
=
= 0.40c
1− 0
′ ) 2 = (−0.60c) 2 + (0.40c) 2 = 0.72c
vB′ = (v′Bx ) 2 + (vBy
θ B = tan −1
v′By
0.40c
= tan −1
= 146°
v′Bx
−0.60c
For ship C, O measures vCx = −0.50c, vCy = 0.
′ =
vCx
−0.50c − 0.60c
′ =0
= −0.85c, vCy
1 − (−0.50)(0.60)
vC′ = 0.85c at θC = 180° (negative x direction)
40
For ship D, O measures vDx = (−0.50c) sin 45° = −0.35c, vDy = +0.35c .
′ =
vDx
0.35c 1 − (0.60) 2
−0.35c − 0.60c
′ =
= −0.79c, vDy
= 0.23c
1 − (−0.35)(0.60)
1 − (−0.35)(0.60)
vD′ = (−0.79c) 2 + (0.23c) 2 = 0.82c at θ D = tan −1
49.
(a) t ′ =
(b) x′ =
t − (u / c 2 ) x
1 − u 2 / c2
x − ut
1− u / c
2
2
=
=
1.52 μ s − (0.563 / 300 m/μ s)(524 m)
1 − (0.563) 2
= 0.648 μ s
524 m − (0.563 × 300 m/μ s)(1.52 μs)
1 − (0.563) 2
0.23c
= 164°
−0.79c
= 335 m
50. (a) O′ measures v′ = (v − u ) /(1 − uv / c 2 ), and according to O′ the energy is
E′ =
mc 2
1 − v′ 2 / c 2
=
mc 2
2
1 − ⎡⎣(v − u ) /(1 − uv / c 2 ⎤⎦ / c 2
and the momentum is
p′ =
mv′
1 − v′ 2 / c 2
(b) E ′ − ( p′c) =
2
2
=
m(v − u ) /(1 − uv / c 2 )
2
1 − ⎡⎣ (v − u ) /(1 − uv / c 2 ) ⎤⎦ / c 2
m 2 c 4 − m 2 ⎡⎣(v − u ) /(1 − uv / c 2 ) ⎤⎦
2
1 − ⎡⎣(v − u ) /(1 − uv / c 2 ) ⎤⎦ / c 2
2
= m2c 4
The quantity E ′2 − ( p′c) 2 is equal to m2c4 in every frame of reference, no matter what
its relative speed u. In other words, every observer measures the same value for the
rest energy or mass.
41
51. (a) O′ measures v′x = −u , v′y = v 1 − u 2 / c 2 .
v′ = (v′x ) 2 + (v′y ) 2 = u 2 + v 2 − u 2 v 2 / c 2
E′ =
p′ =
(b) E ′2 − ( p′c) 2 =
mc 2
1 − v′2 / c 2
mv′
1 − v′ 2 / c 2
=
=
mc 2
1 − u 2 / c 2 − v 2 / c 2 + u 2v 2 / c 4
m u 2 + v 2 − u 2v 2 / c 2
1 − u 2 / c2 − v 2 / c2 + u 2v2 / c4
m 2 c 4 − m 2 c 2 (u 2 + v 2 − u 2 v 2 / c 2 )
= m2c 4
2
2
2
2
2 2
4
1− u / c − v / c + u v / c
52.
40
Time
(years)
30
Amelia’s return
worldline
20
20
16
Bernice’s
worldline
10
Casper’s
worldline
-20
-10
Distance
(light-years)
Amelia’s outbound
worldline
4
0
(b) 40 years
42
(c) During Amelia’s outbound journey, her worldline and Bernice’s overlap. This
part of her journey takes 8 years, as measured in the clocks in Bernice’s frame of
reference.
(d) Let O = Casper and O′ = Bernice. Then u = 0.60c and vx = −0.60c.
vx − u
−0.60c − 0.60c
=
= −0.882c
v′x =
2
1 − vx u / c 1 − (−0.60)(0.60)
(e) On his 4th birthday.
(f) On his 16th birthday.
53. (a) Before the first acceleration, E = E0 = mc2. After the acceleration, the energy is
E1 =
mc 2
1 − v2 / c2
=
0.511 MeV
1 − (0.99) 2
= 3.6 MeV
The change in energy is ΔE = E1 − E0 = 3.6 MeV − 0.5 MeV = 3.1 MeV , so the first
stage adds 3.1 MeV to the energy of the electron.
(b)
mc 2
E2 =
1 − v2 / c2
=
0.511 MeV
1 − (0.999) 2
= 11.4 MeV
The change in energy is ΔE = E2 − E1 = 11.4 MeV − 3.6 MeV = 7.8 MeV , so the
second stage adds about 2.5 times as much energy as the first stage, even though the
second stage increases the velocity by only 0.9%.
54.
K=
mc 2
1− v / c
2
2
− mc 2 =
0.511 MeV
1 − (0.732) 2
− 0.511 MeV = 0.239 MeV per particle
Ebeam = (0.239 MeV/particle)(1.35 × 1011 particles/s)(3600 s) = 1.16 ×1014 MeV = 18.6 J
Copper has a density of ρ = 8.92 g/cm3 and a specific heat capacity of cp = 0.385
J/g⋅K. The mass M of the copper is M = ρV = (8.92 g/cm3 )(2.54 cm)3 = 146 g .
Assuming all of the kinetic energy carried by the particles in the beam acts to produce
a change in temperature of the copper ( Ebeam = Mcp ΔT ), the temperature increase is
ΔT =
Ebeam
18.6 J
=
= 0.33 K = 0.33 C°
Mcp (146 g)(0.385 J/g ⋅ K)
43
55. (a)
pi =
p1f =
mvi
(0.511 MeV/c 2 )(0.960c)
=
1 − vi2 / c 2
mv1f
1 − v1f2 / c 2
1 − (0.960) 2
=
= 1.752 MeV/c
(0.511 MeV / c 2 )(0.956c)
1 − (0.956) 2
= 1.665 MeV/c
pxf = p1f cos θ1 + p2f cos θ 2 = (1.665 MeV/c)(cos 9.7°) + p2f cos θ 2 = 1.642 MeV/c + p2f cos θ 2
p yf = p1f sin θ1 + p2f sin θ 2 = (1.665 MeV/c)(sin 9.7°) + p2f sin θ 2 = 0.281 MeV/c + p2f sin θ 2
Conservation of momentum gives pxf = pi and pyf = 0. Thus
p2f cos θ 2 = 1.752 MeV/c − 1.642 MeV/c = 0.110 MeV/c
p2f sin θ 2 = 0 − 0.281 MeV/c = −0.281 MeV/c
Dividing the second result by the first gives
tan θ 2 =
−0.281 MeV/c
= −2.55
0.110 MeV/c
or
θ 2 = −68.6°
With p2f = (0.110 MeV/c) /[cos(−68.6°)] = 0.302 MeV/c , we have
mv2f
p2f = 0.302 MeV/c =
1 − v2f2 / c 2
and solving, we find v2f = 0.508c.
(b)
Ei =
E1f =
mc 2
1− v / c
2
i
2
mc 2
1 − v1f2 / c 2
=
=
0.511 MeV
1 − (0.960) 2
0.511 MeV
1 − (0.956) 2
= 2.336 MeV
= 1.743 MeV
Conservation of energy gives Ei = E1f + E2f, so E2f = 2.366 MeV − 1.743 MeV =
0.593 MeV and
mc 2
0.511 MeV
E2f = 0.593 MeV =
=
1 − v2f2 / c 2
1 − v2f2 / c 2
and solving we find v2f = 0.508c, in agreement with part (a).
56. The initial energy is
44
Eπ =
mc 2
1− v / c
2
2
=
135 MeV
1 − (0.98) 2
= 678 MeV
and the momentum is
pπ =
1
1
Eπ2 − (mc 2 ) 2 =
(678 MeV)2 − (135 MeV) 2 = 664 MeV/c
c
c
Because the two gamma ray photons have equal energies, each has an energy of
1
2 (678 MeV) , so Eγ = 339 MeV. Each gamma ray photon has a momentum of
pγ = Eγ / c = 339 MeV/c , which has a component pγ cos θ along the direction of the
initial π meson. Conservation of momentum then gives pπ = 2 pγ cos θ , so the angle
is
θ = cos −1
pπ
664 MeV/c
= cos −1
= 11.7°
2 pγ
2(339 MeV/c)
57. The total energy of the kaon is K K + mK c 2 = 77.0 MeV + 497.7 MeV = 574.7 MeV .
The speed of the kaon is found from EK = mK c 2 / 1 − v 2 / c 2 :
574.7 MeV =
497.7 MeV
1 − v2 / c2
which gives v = 0.500c. This is the same as the transformation speed u necessary to
move from the laboratory frame to a frame in which the kaon is at rest.
When a kaon at rest decays into two pions, each pion has an energy of half the
rest energy of the kaon: Eπ = 12 mK c 2 = 248.9 MeV . In this frame, the speed of each
pion is found from Eπ = mπ c 2 / 1 − v′2 / c 2 :
248.9 MeV =
139.6 MeV
1 − v ′2 / c 2
Solving, we find v′ = 0.828c, with the two pions moving in opposite directions with
this speed (v1′ = +0.828c, v2′ = −0.828c).
We can now transform back to the original laboratory frame:
45
K1 =
K2 =
v1 =
v1′ + u
0.828c + 0.500c
=
= 0.9392c
2
1 + v1′u / c 1 + (0.828)(0.500)
v2 =
v2′ + u
−0.828c + 0.500c
=
= −0.5597c
2
1 + v2′ u / c 1 + (−0.828)(0.500)
mπ c 2
1 − v12 / c 2
mπ c 2
1− v / c
2
2
2
− mπ c 2 =
− mπ c 2 =
139.6 MeV
1 − (0.9392) 2
139.6 MeV
1 − (0.5597) 2
46
− 139.6 MeV = 267.0 MeV
− 139.6 MeV = 28.9 MeV
Chapter 3
This chapter presents the three experiments of the late 19th and early 20th centuries
that pointed toward the particle nature of electromagnetic radiation: the photoelectric
effect, thermal radiation, and Compton scattering. I have chosen not to present these
experiments in their historic order, because the barrier for understanding thermal
radiation is significantly greater than that for the photoelectric effect. The latter is clear
and unambiguous, while the analysis of the former depends on a complex argument
touching on statistical considerations, the full details of which are best left for a later
time. For a first exposure to these ideas, the photoelectric effect presents fewer
challenges. (However, see the discussion in Chapter 2 of the book by Greenstein and
Zajonc cited in the reading list below; they summarize the argument that a classical
radiation field and quantized levels in atoms can explain the photoelectric effect, without
recourse to quantizing the radiation field, and that a semiclassical explanation can also be
given for the Compton effect. Nevertheless, for an introduction at this level I prefer to
offer the traditional explanation of these experiments in terms of photons.)
Supplemental Materials
Double slit interference:
http://vsg.quasihome.com/interfer.htm
Physlet Quantum Physics, Section 5.4
Photoelectric effect:
Physlet Quantum Physics, Section 5.2
Thermal (blackbody radiation):
http://www.mhhe.com/physsci/astronomy/applets/Blackbody/frame.html
Compton scattering:
Physlet Quantum Physics, Section 5.2
Other processes:
http://www.upscale.utoronto.ca/GeneralInterest/Harrison/Flash/Nuclear/PairProduction/P
airProduction.html
Wave-particle duality:
I have used in my classes a very nice interferometer simulation called “Quantum Eraser”
developed at the University of Munich by Albert Huber. [See also the discussion of the use
of this simulation by Chandralekha Singh, American Journal of Physics 76, 400 (2008).]
The original version of this program, called “Polfilter”, is available through the archives of
the University of Munich physics education research group at:
http://www.didaktik.physik.uni-muenchen.de/archiv/inhalt_materialien/polfilter/index.html .
47
Suggestions for Additional Reading
A collection of photographs illustrating the phenomena of classical optics can be found in
M. Cagnet, M. Francon, and J. C. Thrierr, Atlas of Optical Phenomena (Berlin, SpringerVerlag, 1962).
For more complete discussions of blackbody radiation, including more detailed
derivations of the Rayleigh-Jeans law, see:
R. Eisberg and R. Resnick, Quantum Physics of Atoms, Molecules, Solids, Nuclei,
and Particles, 2nd ed. (Wiley, 1985).
F. K. Richtmeyer, E. H. Kennard, and J. N. Cooper, Introduction to Modern Physics,
6th ed. (McGraw-Hill, 1969).
The properties of X rays, including diffraction and scattering, are discussed in the
following:
L. Bragg, “X-Ray Crystallography,” Scientific American 219, 58 (July 1968).
G. L. Clark, Applied X Rays (McGraw-Hill, 1940).
A. H. Compton and S. K. Allison, X Rays in Theory and Experiment (Van Nostrand, 1935).
N. A. Dyson, X Rays in Atomic and Nuclear Physics (Cambridge University Press, 1990).
For more details of experiments discussed in this chapter and their importance in the
development of quantum theory, see:
W. H. Cropper, The Quantum Physicists (Oxford University Press, 1970), chapter 1.
G. Greenstein and A. Zajonc, The Quantum Challenge (Jones and Bartlett, 1997).
A. Shimony, “The Reality of the Quantum World,” Scientific American 258, 46 (Jan. 1988).
Materials for Active Engagement in the Classroom
A. Reading Quizzes
1. The brehmsstrahlung process occurs when
(1) an isolated electron emits a photon.
(3) an electron absorbs a photon.
(2) an electron encounters a positron.
(4) an electron decelerates near an atom.
2. The Compton effect is based on:
(1) scattering of photons by the tightly bound inner electrons of an atom.
(2) scattering of photons by the loosely bound, nearly free electrons of a material.
(3) interference of light waves scattered from electrons.
(4) the wave-like behavior of electrons.
3. In the Compton effect:
(1) an electron emits an X-ray photon.
(2) an X-ray photon is absorbed by a metal surface and knocks loose an electron.
(3) an X-ray photon loses energy after colliding with an electron.
(4) an X-ray photon gains energy after colliding with an electron.
48
4. The photoelectric effect:
(1) verifies that electrons behave like waves.
(2) involves the interference of light waves that reflect from the surface of a metal.
(3) is consistent only with the wave theory of light.
(4) verifies that light behaves as if it is composed of particles.
5. Which of the following processes is impossible under all circumstances?
(1) photon → electron + positron
(2) electron + positron → photons
(3) electron → electron + photon
(4) photon + electron → photon + electron
(5) photon + electron → electron
(6) All of the above are possible.
Answers
1. 4
2. 2
3. 3
4. 4
5. 6
B. Conceptual or Discussion Questions
1. Photons of wavelength λ are Compton scattered from electrons, and the scattered
photons of wavelength λ′ are observed at an angle of 90 degrees relative to the
direction of the incident photons.
(a) If the detector of the scattered photons is moved to an angle that is smaller than 90
degrees, the wavelength of the scattered photons will:
(1) increase
(2) decrease
(3) remain the same
(4) increase at some angles between 0 and 90 degrees and decrease at other angles
(b) If the source of incident photons is replaced with one that produces photons of
much larger wavelength, how does the change in wavelength Δλ = λ′ - λ measured at
90 degrees compare with that of the original source?
(1) Δλ increases
(2) Δλ decreases
(3) Δλ remains the same
2. Compton scattering suggests that the light scattered from objects should change
wavelength when the objects are viewed from different angles. Why don’t we
observe objects changing color as we vary the viewing angle?
3. In a photoelectric experiment, changing one of the experimental conditions might
produce one of the following results:
(1) Increase the photoelectric current.
(2) Increase the stopping potential.
(3) Decrease the photoelectric current.
(4) Decrease the stopping potential.
Choose the outcome that would occur after the following changes:
(a) Replace the light source with one of twice the frequency but emitting the same
number of photons per second.
(b) Replace the light source with one of twice the wavelength but emitting the same
number of photons per second.
(c) Replace the light source with one of the same frequency but emitting twice as
many photons per second.
(d) Without changing the light source, replace the emitter surface with a material
having a smaller work function.
49
4. Possible interactions between electrons and photons can be represented symbolically
by the 5 processes listed below. For each process, give the conventional name for the
process, state whether it can occur for isolated particles, and describe how energy is
conserved in the process.
(a) photon → electron + positron
(b) electron + positron → photons
(c) electron → electron + photon
(d) photon + electron → photon + electron
(e) photon + electron → electron
Answers
1. (a) 2 (b) 3
2. Δλ ∼ 0.001 nm
3. (a) 2 (b) 4 (c) 1 (d) 2
Sample Exam Questions
A. Multiple Choice
1. Some stars appear to have a color that is more blue than the color of the Sun. How
would the surface temperature of a blue star compare with the surface temperature of
the Sun?
(a) Tblue star > TSun
(b) Tblue star < TSun
2. The most intense radiation emitted from a hot sample of metal has a wavelength of 60
μm. When the temperature of the sample is doubled, what will be the wavelength of
the most intense radiation?
(a) 30 μm
(b) 120 μm
(c) 960 μm
(d) 15 μm
3. A glowing object emits radiation with a spectrum in which there is one particular
wavelength at which the maximum intensity occurs. If the temperature of the object
is doubled, what happens to the wavelength of the intensity maximum?
(a) Remains the same
(b) Becomes twice as large
(c) Becomes half as large
(d) Becomes 4 times as large
(e) Becomes 16 times as large
4. The Sun’s yellow color corresponds to a surface temperature of about 5500 K. What
would be the color of a star with surface temperature of 7000 K?
(a) red (longer wavelength)
(b) blue (shorter wavelength)
(c) yellow (same wavelength)
5. Electrons are accelerated through a potential difference of 2000 volts and are incident
on a metal surface, resulting in the emission of photons. Which of the following
photon wavelengths would NOT be observed from this surface?
(a) 0.24 nm
(b) 0.78 nm
(c) 1.25 nm
(d) 3.62 nm
6. Light of wavelength 477 nm is incident on the surfaces of several different metals.
For which value of the work function will electrons be emitted from the surface?
(a) 4.2 eV
(b) 3.7 eV
(c) 3.2 eV
(d) 2.3 eV
50
7. When photons of wavelength 488 nm are incident on a metal surface, electrons of
maximum kinetic energy 1.39 eV are emitted from the surface. What is the minimum
energy needed to remove an electron from this metal?
(a) 2.54 eV (b) 3.93 eV (c) 0.65 eV (d) 1.15 ev
8. For a certain metal surface, electrons are emitted when the surface is illuminated with
light of wavelength below 435 nm but for no wavelengths above 435 nm. What is the
work function of this surface?
(a) 1.36 eV (b) 2.85 eV (c) 3.48 eV (d) None of these values.
9. At temperature T a body emits its most intense radiation at a wavelength of 5.6 μm.
What is the wavelength of the most intense radiation emitted by the same body at
temperature 4T?
(a) 22.4 μm (b) 4.0 μm (c) 1.4 μm (d) 7.8 μm (e) 5.6 μm
10. Electrons of maximum kinetic energy K1 are released when X rays of wavelength λ1
are incident on the surface of a metal. If the light source is replaced by another that
emits photons at the same rate but of longer wavelength λ2, how is the resulting
maximum kinetic energy K2 related to K1?
(a) K2 = K1
(b) K2 > K1
(c) K2 < K1
11. Electrons are emitted when an ultraviolet light source of wavelength λ illuminates a
certain metal surface. If you wanted to increase the number of electrons per unit time
emitted from the surface, you should
(a) increase the frequency of the light source
(b) increase the wavelength of the light source
(c) add a second light source identical to the first light source
12. A metal surface is illuminated with light of wavelength λ, and a resulting current i is
observed in an electric circuit connected to the surface. The source is replaced with a
different one in which the photon emission rate is only half as large. What should be
the wavelength of this second source in order that the current have the same value i?
(a) 2λ (b) λ/2 (c) > 2λ (d) < λ/2
(e) The experiment is impossible -- the second source can never give the same
current i.
13. Which one of these processes involves a decrease in the kinetic energy of an electron?
(a) bremsstrahlung
(b) photoelectric effect
(c) Compton scattering
(d) pair production
Answers
1. a
11. c
2. a
12. e
3. c
13. a
4. b
5. a
51
6. d
7. d
8. b
9. c
10. c
B. Conceptual
1. Photons of wavelength λ are incident on a metal target. Scattered photons are
observed at an angle θ1 relative to the direction of the original photons. In this
geometry, it is determined that the scattered electrons have kinetic energy K1. If the
scattered photons were observed at a larger angle, would the corresponding kinetic
energy of the scattered electrons be greater than K1, equal to K1, or less than K1?
EXPLAIN YOUR ANSWER.
2. A beam of photons of energy E is incident on a metal target. The photons scatter
from the nearly free electrons in the target, and the scattered photons are observed at
an angle θ relative to the direction of the original beam of photons. When the
photons emerge at that angle, the scattered electrons have a certain kinetic energy. As
the angle θ is made smaller, does the corresponding kinetic energy of the scattered
electrons increase, decrease, or remain the same? EXPLAIN YOUR ANSWER.
3. Consider two monochromatic (single-wavelength) light sources emitting light of
respective wavelengths λ1 and λ2, with λ2 > λ1. The two bulbs are otherwise identical
and emit light with exactly the same intensity (in W/m2). A detector placed a distance
d from bulb 1 (emitting at wavelength λ1) records N photons per second. When the
same detector is placed at the same distance d from bulb 2 (emitting at wavelength
λ2), is the number of photons per second recorded by the detector greater than N,
smaller than N, or equal to N? EXPLAIN YOUR ANSWER.
4. A source of light of wavelength λ is incident on a metal surface, and electrons of
maximum kinetic energy K are observed to be emitted from the surface. The source
is replaced by a different source that emits the same power (in watts) but has a
smaller wavelength. Does the rate at which electrons are emitted from the surface
increase, decrease, or remain the same, and does their maximum kinetic energy
increase, decrease, or remain the same? EXPLAIN YOUR ANSWERS.
5. A beam of photons of energy E1 strikes a metal surface, and electrons are observed to
be emitted at a rate that produces a current i1 in an external circuit. If the photon
energy is increased while the number of photons per second striking the surface is
kept constant, does the current in the external circuit increase, decrease, or remain
the same? EXPLAIN YOUR ANSWER.
52
6. When a certain light source illuminates a metal surface, electrons are emitted from the
metal with kinetic energies up to the value K. The light source is replaced with one
that has the same wavelength but less intensity. With this new light source, does the
upper limit of the electron kinetic energies increase, decrease, or remain the same?
EXPLAIN YOUR ANSWER.
7. Consider an experiment in which a beam of monoenergetic photons is incident on
free electrons. The scattered electrons are observed with an energy E1 when the
scattered photons are observed at an angle θ1. For the same incident photons, when
the scattered photons are observed at an angle that is smaller than θ1 do the scattered
electrons have an energy that is greater than E1, less than E1, or equal to E1?
EXPLAIN YOUR ANSWER.
8. The walls of a hollow metal box are maintained at a temperature T = 1000 K. The
box is filled with photons in equilibrium with the walls. A tiny hole in one of the
walls allows a small number of the photons to escape. Your equipment measures the
number of escaping photons in a small interval of wavelength dλ at a wavelength of
10-5 m. If you raise the temperature of the box to 2000 K, would you expect the
number of photons in the same interval at the same wavelength to increase, decrease,
or stay about the same? EXPLAIN YOUR ANSWER.
9. A beam of ultraviolet light is incident on a metal surface. Electrons leave the surface
with a range of kinetic energies from very small values up to some maximum value.
If the light source is replaced by a different source that emits photons at the same rate
but with smaller wavelength, does the range of electron kinetic energies become
larger, become smaller, or remain the same? EXPLAIN YOUR ANSWER.
10. In Einstein’s explanation of the photoelectric effect, for a fixed wavelength the
number of emitted photoelectrons is [directly proportional to, independent of] the
intensity of the incident radiation and the kinetic energy of the emitted photoelectrons
is [directly proportional to, independent of] the intensity of the incident radiation.
EXPLAIN YOUR ANSWERS.
11. X rays of wavelength λ1 are incident on a material, and scattered X rays of
wavelength λ1 + Δλ1 are observed at the scattering angle θ. The source of X rays is
now replaced with a source of wavelength λ2 which is greater than λ1, and at the same
angle θ the scattered X rays now have wavelength λ2 + Δλ2. Is Δλ2 greater than,
equal to, or less than Δλ1? EXPLAIN YOUR ANSWER.
12. The walls of a hollow metal box are maintained at a temperature T = 1000 K. The
box is filled with photons in equilibrium with the walls. A tiny hole in one of the
walls allows a small number of the photons to escape. Your equipment measures the
number of escaping photons in a small interval of wavelength dλ at a wavelength of
10-5 m. If you raise the temperature of the box to 2000 K, would you expect the
number of photons in the same interval at the same wavelength to increase, decrease,
or stay about the same? EXPLAIN YOUR ANSWER.
53
Answers
1. greater than
2. decrease
4. decrease, decrease 5. remain the same
7. less than
8. increase
10. directly proportional to, independent of
12. increase
3. greater than
6. remain the same
9. become larger
11. equal to
C. Problems
1. Light of wavelength 435 nm is incident on a metal surface, and it is observed that
electrons leave the surface with a maximum kinetic energy of 1.16 eV.
(a) What is the work function of this metal?
(b) What is the maximum kinetic energy of the electrons if light of wavelength
560 nm is used?
(c) What is the longest wavelength of light that will cause electrons to be emitted
from this surface?
2. Light from a source with a variable wavelength is incident on a metal. It is observed
that electrons are emitted from the surface of the metal for all wavelengths less than
525 nm but never for wavelengths above 525 nm.
(a) What is the minimum energy necessary to remove an electron from the surface of
the metal?
(b) After leaving the surface, electrons must cross through a potential difference V in
order to contribute to the current in an external circuit. When the wavelength of
the light is changed to 345 nm, what potential difference is necessary to prevent
the most energetic electrons from completing the circuit?
3. Ultraviolet radiation of wavelength 176 nm is incident on the surface of a metal.
Electrons are released from the metal with a maximum kinetic energy of 4.52 eV.
(a) What is the maximum wavelength of the incident radiation that could cause
electrons to be released from the metal?
(b) If the wavelength of the incident radiation were changed to 288 nm, what would
be the maximum kinetic energy of the emitted electrons?
4. A beam of photons of energy 6250 eV is incident on an aluminum target. Scattered
photons are observed at an angle of 60o relative to the direction of the incident beam.
(a) What is the wavelength of the scattered photons?
(b) Assuming that the photons scatter from nearly free electrons, what is the energy
given to the scattered electrons?
(c) Find the electron’s momentum component in the direction of the original incident
photons.
54
5. X-ray photons of wavelength 0.01575 nm are incident on free electrons at rest. After
the interaction, photons of wavelength 0.01772 nm are observed.
(a) Relative to the direction of the original X-rays, at what angle would we observe
these photons?
(b) What is the kinetic energy given to the electrons by this interaction?
6. A beam of photons of energy 184 keV is incident on a target. Scattered photons are
observed at an angle of 60° relative to the direction of the incident beam. Assume
that the photons scatter from free electrons in the target.
(a) What is the energy of the scattered photons?
(b) Find the kinetic energy that is acquired by the scattered electrons.
(c) Find the magnitude of the electron’s momentum and the component of the
electron’s momentum perpendicular to the direction of the incident beam.
7. The stopping potential for a certain surface is 1.25 V when it is illuminated with light
of wavelength 471 nm. When the wavelength is changed to a new value, the stopping
potential becomes 1.68 V.
(a) What is this new wavelength?
(b) What is the work function of this surface?
8. An X-ray photon of wavelength 0.00375 nm is scattered from an electron.
(a) At what angle would we observe scattered photons of wavelength 0.00860 nm?
(b) For these scattered photons, what is the kinetic energy of the scattered electrons?
9. An ultraviolet lamp of adjustable wavelength is shining on a metal surface. It is observed
that electrons begin to emerge from the surface when the wavelength is 255 nm.
(a) What is the minimum energy necessary to remove an electron from the surface of
this metal?
(b) If the wavelength is reduced to 215 nm, what is the energy of the electrons that
leave the surface?
10. A metal surface is illuminated with light of different wavelengths. It is observed that
electrons are emitted from the metal for wavelengths of light up to 525 nm but for no
wavelengths above 525 nm. When light of 420 nm is used, what is the maximum
kinetic energy of the electrons?
11. A metal surface is illuminated with ultraviolet light of adjustable wavelength. It is
observed that electrons are emitted from the surface when the wavelength of the
ultraviolet light is below 325 nm but never when the wavelength is above 325 nm.
What is the kinetic energy of the emitted electrons when light of wavelength 243 nm
is used?
55
12. The largest wavelength of light that will cause emission of photoelectrons from a
certain surface is 486 nm.
(a) What is the work function of the surface?
(b) When light of wavelength 325 nm is used, what is the stopping potential?
Answers
1. (a) 1.69 eV (b) 0.52 eV (c) 734 nm
2. (a) 2.36 eV (b) 1.23 V
3. (a) 491 nm (b) 1.78 eV
4. (a) 0.1996 nm (b) 38 eV (c) 3144 eV/c
5. (a) 79° (b) 8.75 keV
6. (a) 156 keV (b) 28 keV (c) 171 keV/c, 135 keV/c
7. (a) 405 nm (b) 1.38 eV
8. (a) 178° (b) 186 keV
9. (a) 4.86 eV (b) 0.91 eV
10. 0.59 eV
11. 1.29 eV
12. (a) 2.55 eV (b) 1.27 V
56
Problem Solutions
λD
(589.0 nm)(2.357 m)
= 1.32 mm
1.05 mm
1.
Δy = yn +1 − yn =
2.
sin θ =
nλ 2(0.250 nm)
=
= 0.8865
2d 2(0.282 nm)
3.
(a) λ =
2d sin θ 2(0.347 nm)(sin 34.0°)
=
= 0.388 nm
n
1
d
=
so
θ = sin −1 0.8865 = 62.4°
(b) The spacing between planes is (0.347 nm) sin 45° = 0.245 nm . The Bragg
condition then gives
sin θ =
λ
2d
=
0.388 nm
= 0.791
2(0.245 nm)
or
θ = 52.2°
This is the angle that the reflected ray makes with the plane of atoms. Because this
plae makes and angle of 45° with the surface, the beam emerges at an angle of
52.2° − 45° = 7.2° with the surface.
4.
The Bragg formula for the first-order peak is λ = 2d sin θ . We need to know the
relationship between a small angular range dθ and the corresponding wavelength
range dλ, which is found by taking the differentials from the Bragg formula:
d λ = 2d cos θ dθ
Eliminating the lattice spacing d using the Bragg formula, we obtain (after converting
dθ to radians)
⎛ λ ⎞
dλ = 2⎜
⎟ cos θ dθ = λ cot θ dθ
⎝ 2sin θ ⎠
= (0.149 nm)(cot 15.15°)(2.6 × 10-4 rad) = 1.4 × 10−4 nm
5.
(a) E = 10.0 MeV = 1.60 × 10−12 J
E 10.0 MeV
=
= 1.00 × 107 eV/c
c
c
−12
1.60 × 10 J
= 5.33 × 10−21 kg ⋅ m/s
p=
8
3.00 × 10 m/s
p=
57
(b) E = 25 keV = 4.0 × 10−15 J
E 25 keV
=
= 2.5 × 104 eV/c
c
c
4.0 × 10−15 J
p=
= 1.3 × 10−23 kg ⋅ m/s
8
3.00 × 10 m/s
p=
(c) λ = 1.0 μ m = 1.0 × 103 nm
p=
h
λ
=
1 hc 1 1240 eV ⋅ nm
=
= 1.2 eV/c
c λ c 1.0 × 103 nm
6.6 × 10−34 J ⋅ s
p=
= 6.6 × 10−28 kg ⋅ m/s
−6
1.0 × 10 m
(d) E = hf = (4.14 ×10−15 eV ⋅ s)(150 ×106 Hz) = 6.2 × 10−7 eV = 9.9 ×10−26 J
E 6.2 × 10−7 eV
=
= 6.2 × 10−7 eV/c
c
c
−26
9.9 × 10 J
= 3.3 × 10−34 kg ⋅ m/s
p=
3.00 × 108 m/s
p=
6.
At 1 MHz = 106 Hz, E = hf = (4.14 ×10−15 eV ⋅ s)(106 s -1 ) = 4 × 10−9 eV
At 100 MHz = 108 Hz, E = hf = (4.14 ×10−15 eV ⋅ s)(108 s -1 ) = 4 ×10−7 eV
The range is from 4 × 10−9 eV to 4 × 10−7 eV.
7.
(a) λ =
hc 1240 eV ⋅ nm
=
= 0.124 nm
E 1.00 × 104 eV
(b) λ =
1240 eV ⋅ nm
= 1.24 × 10−3 nm
1.00 × 106 eV
(c) 350 nm:
E=
700 nm:
E=
hc
λ
=
1240 eV ⋅ nm
= 3.5 eV
350 nm
1240 eV ⋅ nm
= 1.8 eV
700 nm
The range is from 1.8 eV to 3.5 eV.
58
8.
With φ = 4.08 eV for aluminum,
hc
λc =
=
φ
1240 eV ⋅ nm
= 304 nm
4.08 eV
1239.853 eV ⋅ nm
= 3.808 eV
λc
325.6 nm
hc
1239.853 eV ⋅ nm
−φ =
− 3.808 eV = 0.964 eV
eVs =
259.8 nm
λ
Vs = 0.964 V
φ=
9.
hc
eVs,Cu =
10.
=
hc
λ
− φCu
and
eVs,Na =
hc
λ
− φNa
Subtracting, we obtain
eVs,Cu − eVs,Na = φNa − φCu = 2.28 eV − 4.70 eV = −2.42 eV
Vs,Na = Vs,Cu + 2.42 eV = V + 2.42 volts
11. (a) φ =
hc
λc
=
1240 eV ⋅ nm
= 4.88 eV
254 nm
(b) λ < 254 nm
12. (a) With φ = 4.31 eV, λc =
(b) eVs =
hc
λ
−φ =
hc
=
φ
1240 eV ⋅ nm
= 288 nm
4.31 eV
1240 eV ⋅ nm
− 4.31 eV = 1.33 eV, so Vs = 1.33 volts
220.0 nm
13. (a) The total number of oscillators is
∫
∞
0
n( E ) dE = ∫
∞
0
N − E / kT
N
e
dE =
(− kT )e − E / kT
kT
kT
∞
=N
0
(b) The average energy is (from Equation 3.33)
Eavg =
1
N
∫
∞
0
E n( E ) dE =
1
kT
∫
∞
0
∞
E e − E / kT dE = kT ∫ xe− x dx
0
with x = E / kT
The definite integral is a standard form that is equal to 1, so Eavg = kT .
59
14. (a) The total number of oscillators at all energies is
∞
∞
∞
i =0
n=0
n=0
∑ N n = ∑ Ae− En / kT = A∑ e− nε / kT = A
1
1 − e −ε / kT
Setting this result equal to N, we obtain A = N (1 − e −ε / kT ) .
d ∞ nx ∞ nx
d 1
ex
.
(b) On the left side
ne and on the right side
=
∑e = ∑
dx n =0
dx 1 − e x (1 − e x ) 2
n=0
∞
Setting these equal to each other gives ∑ ne nx =
n =0
(c) Eavg =
1
N
∞
∞
n=0
n=0
ex
.
(1 − e x ) 2
∑ N n En = (1 − e−ε / kT )∑ (nε )e− nε / kT = (1 − e−ε / kT )ε
(d) For large λ, ehc / λ kT ≈ 1 + hc / λ kT and thus Eavg =
e −ε / kT
ε
= ε / kT
− ε / kT 2
(1 − e
)
e
−1
hc / λ
hc / λ
≈
= kT
− 1 1 + hc / λ kT − 1
e
hc / λ kT
As λ goes to 0, ehc / λ kT → ∞ and Eavg → 0 .
15.
I (λ ) =
2π hc 2
λ
5
1
e
hc / λ kT
−1
hc / λ kT
⎡⎛ −5 ⎞
dI
1
)(− hc / λ 2 kT ) ⎤
⎛ 1 ⎞ ( −e
= 2π hc 2 ⎢⎜ 6 ⎟ hc / λ kT
+⎜ 5 ⎟
⎥
−1 ⎝ λ ⎠
dλ
(e hc / λ kT − 1) 2
⎣⎝ λ ⎠ e
⎦
Setting dIdλ equal to zero gives
(e hc / λ kT )( hc / λ 2kT )
− +
=0
λ
e hc / λ kT − 1
5
or, with x = hc / λ kT ,
( x − 5)e x + 5 = 0
This equation does not have an exact solution, but an approximate solution can be
found by trial and error: x = 4.9651 = hc / λ kT , so
λT =
hc
1239.853 eV ⋅ nm
=
= 2.8978 × 10−3 m ⋅ K
−5
4.9651k 4.9651(8.6174 × 10 eV/K)
60
∫
16.
∞
0
I (λ ) d λ = ∫
∞
0
2π hc 2
λ
5
1
e
hc / λ kT
−1
dλ
With x = hc / λ kT and dx = ( −hc / λ 2kT )d λ ,
∫
∞
0
3
3
⎛ kT ⎞ ⎛ kT ⎞ ∞ x dx
I (λ ) d λ = 2π hc ⎜
⎟ ⎜−
⎟∫ x
⎝ hc ⎠ ⎝ hc ⎠ 0 e − 1
2
4
3
∞ x dx
2π k 4
π4
⎛ k ⎞
= 2π hc ⎜ ⎟ T 4 ∫ x
= 3 2 T4
= σT 4
0 e −1
hc
h
c
15
⎝ ⎠
2
with σ = 2π 5k 4 /15h 3c 2
1/ 3
⎛ 2π 5k 4 ⎞
h=⎜
2 ⎟
⎝ 15σ c ⎠
17.
1/ 3
⎡
⎤
2π 5 (1.38066 × 10−23 J/K)4
=⎢
2
4
8
2⎥
−8
⎣ 15(5.6704 × 10 W/m ⋅ K )(2.9979 × 10 m/s) ⎦
= 6.626 × 10−34 J ⋅ s
18.
λ=
2.898 × 10−3 m ⋅ K 2.898 × 10−3 m ⋅ K
=
= 483 nm
T
6000 K
This is in the middle of the visible spectrum, close to the peak sensitivity of the eye.
19.
2.898 × 10−3 m ⋅ K 2.898 × 10−3 m ⋅ K
λ=
=
= 1.1 mm (microwave region)
T
2.7 K
E=
hc
λ
=
1240 eV ⋅ nm
= 1.1 × 10−3 eV
1.1 mm
2.898 ×10−3 m ⋅ K 2.898 ×10−3 m ⋅ K
=
= 9.4 μ m (infrared)
T
307 K
(b) Assume a person can be represented as a cylinder, about 6 feet (1.83 m) tall and 1
foot (0.30 m) in diameter. The surface area is 2π rL = 2π (0.15 m)(1.83 m) = 1.72 m 2 .
20. (a) λmax =
I = σ T 4 = (5.67 × 10−8 W/m 2 ⋅ K 4 )(307 K) 4 = 504 W/m 2
P = IA = (504 W/m 2 )(1.72 m 2 ) = 870 W
(c) For T = 20°C = 293 K,
61
I = σ T 4 = (5.67 × 10−8 W/m 2 ⋅ K 4 )(293 K) 4 = 418 W/m 2
P = IA = (418 W/m 2 )(1.72 m 2 ) = 719 W
Thus the net power radiated by a person is about 150 W.
21.
I = σ T 4 = (5.67 × 10−8 W/m 2 ⋅ K 4 )(1650 K) = 4.20 × 105 W/m 2
P = IA = I (π r 2 ) = (4.20 ×105 W/m 2 )π (0.50 × 10−3 m) 2 = 0.33 W
22.
This small wavelength interval can be treated as a differential dλ. At T = 1675 K,
kT = (8.6174 ×10−5 eV/K)(1675 K) = 0.1443 eV . From Equation 3.41 we obtain
2π hc 2
1
dI = I (λ ) d λ =
dλ
hc / λ kT
5
−1
λ e
2π (6.626 × 10−34 J ⋅ s)(2.998 ×108 m/s) 2 (1.55 ×10−9 m)
=
= 61.4 W/m 2
−9
5
(1240eV⋅nm) /(875 nm)(0.1443 eV)
(875 × 10 m) (e
− 1)
23. (a) We consider an interval of width dλ = 2.0 nm at a central wavelength of 551.0
nm. At T = 6000 K, kT = (8.6174 × 10−5 eV/K)(6000 K) = 0.517 eV . The intensity
in this interval is
dI = I (λ ) d λ =
2π hc 2
1
dλ
e
−1
2π (6.626 × 10−34 J ⋅ s)(2.998 × 108 m/s)(2.0 nm)
=
= 1.9 ×105 W/m 2
5
(1240eV⋅nm) /(551.0 nm)(0.517 eV)
−9
(551.0 × 10 m) (e
− 1)
λ
5
hc / λ kT
(b) The total radiant intensity emitted by the Sun is
I = σ T 4 = (5.67 × 10−8 W/m 2 ⋅ K 4 )(6000 K) 4 = 7.35 × 107 W/m 2
The fraction is then
1.9 × 105 W/m 2
= 0.0026 = 0.26%
7.35 × 107 W/m 2
24.
( E + me c 2 − E ′) 2 = c 2 ( p 2 − 2 pp′ cos θ + p′2 ) + me2c 4
E 2 + E ′2 + me2c 4 + 2 Eme c 2 − 2 EE ′ − 2 E ′me c 2 = c 2 p 2 − 2c 2 pp′ cos θ + c 2 p′2 + me2c 4
With E 2 = c 2 p 2 and E ′2 = c 2 p′2 ,
62
Eme c 2 − EE ′ − E ′me c 2 = − EE ′ cos θ
me c 2 ( E − E ′) = EE ′(1 − cos θ )
E − E′ 1 1
1
(1 − cos θ )
= − =
EE ′
E ′ E mec 2
25. (a)
1 1 1 − cos θ
1
1− 2 / 2
= +
=
+
= 0.09682 keV −1
2
E′ E
me c
10.39 keV 511.0 keV
so E ′ = 1/ 0.09682 keV −1 = 10.33 keV .
(b) K e = Ee − me c 2 = E − E ′ = 10.39 keV − 10.33 keV = 0.06 keV
26. (a) λ ′ = λ + ( h / me c )(1 − cos θ )
= 0.02480 nm + (0.002426 nm)(1 − cos 90°) = 0.02723 nm
(b) The momenta of the incident and scattered photons are
p=
p′ =
h
λ
h
λ
=
1 hc 1 1240 eV ⋅ nm
=
= 4.999 ×104 eV/c ( x direction)
c λ c 0.02480 nm
=
1 hc 1 1240 eV ⋅ nm
=
= 4.553 × 104 eV/c ( y direction)
c λ c 0.02723 nm
(c) K e = E − E ′ = cp − cp′ = 4.999 × 104 eV − 4.553 × 104 eV = 4.46 × 103 eV
(d) Because momentum must be conserved, the x component of the electron’s
momentum must equal p, and the y component must equal − p′ :
pex = p = 4.999 × 104 eV/c
pe =
and
pey = − p′ = −4.553 × 104 eV/c
pe2x + pe2y = (4.999 × 104 eV/c ) 2 + (4.553 × 104 eV/c ) 2 = 6.762 × 104 eV/c
in the direction given by θ = tan −1
27. When θ = 180°, cos θ = −1 and
pey
pex
= tan −1
−4.553 × 104 eV/c
= −42.3°
4.999 × 104 eV/c
1 1
2
= +
, so
E ′ E mec 2
63
E′ =
28.
(a)
Emec 2
me c 2
me c 2
=
≅
= 0.25 MeV when E >> me c 2
2
2
2 E + me c
2 + me c / E
2
1 1 1 − cos θ
1
1 − cos 60°
= +
=
+
= 2.489 MeV −1
2
E′ E
me c
0.662 MeV 0.511 MeV
so E ′ = 1/ 2.489 MeV −1 = 0.402 MeV .
(b) K e = E − E ′ = 0.662 MeV − 0.402 MeV = 0.260 MeV
29.
The initial momentum of the atom is zero, so conservation of momentum requires that
the total final momentum of the atom and the photon also must equal zero. Thus the
recoil momentum of the atom patom and the momentum p of the photon must be equal
in magnitude and opposite in direction. The photon momentum is
p=
E 6.4 keV
=
= 6.4 × 103 eV/c
c
c
The recoil momentum of the atom is therefore patom = 6.4 × 103 eV/c . The kinetic
energy associated with this momentum is certainly going to be far smaller than the
atom’s rest energy (the mass of an iron atom is about 56 u, and thus its rest energy is
in the range of 50,000 MeV). We are therefore safe in using nonrelativistic kinetic
energy:
K atom =
2
(6.4 × 103 eV) 2
patom
p2 c2
= atom 2 =
= 3.9 × 10−4 eV
2m
2mc
2(56 u)(931.5 MeV/u)
30. After acceleration through a potential difference of ΔV = 2.5 × 104 V , the electrons
lose a potential energy of ΔU = q ΔV = 2.5 × 104 eV and thus gain a kinetic energy of
the same amount. From Equation 3.55,
λmin =
hc 1240 eV ⋅ nm
=
= 0.0496 nm
K
2.5 × 104 eV
31. The energy of the absorbed photon is
E=
hc
λ
=
1240 eV ⋅ nm
= 3.31 eV
375 nm
Neglecting the small recoil kinetic energy of the atom, this is the amount by which
the internal energy of the atom increases. The energy of the emitted photon is
64
E=
hc
λ
=
1240 eV ⋅ nm
= 2.14 eV
580 nm
Again neglecting the recoil of the atom, this is the amount by which the internal
energy decreases what the photon is emitted. The net change in energy of the atom is
ΔE = 3.31 eV − 2.14 eV = 1.17 eV
32.
(a) E =
hc
λ
=
1240 eV ⋅ nm
= 2.25 eV/photon = 3.61× 10−19 J/photon
550 nm
radiated power = 55 W × 0.75 = 41.25 W = 41.25 J/s
photon emission rate =
41.25 J/s
= 1.14 × 1020 photons/s = 9.12 × 1023 photons/h
−19
3.61× 10 J/photon
(b) At a distance of d = 1.0 m, the protons are spread uniformly over a sphere of
surface area 4π d 2 . The fraction that strikes the paper depends on the ratio between
the area of the paper and the area of the spherical surface over which they are spread:
Rate = emission rate ×
area of paper
area of sphere
= (1.14 × 1020 photons/s)
(0.10 m)(0.10 m)
= 9.1× 1016 photons/s
2
4π (1.0 m)
33. Applying eVs = hc / λ − φ to both of the data points, we have
0.65 eV =
hc
−φ
420 nm
and
1.69 eV =
hc
−φ
310 nm
Subtracting these two equations, we find
⎛ 1
1 ⎞
1.04 eV = hc ⎜
−
⎟
⎝ 310 nm 420 nm ⎠
h=
1.04 eV
= 4.10 × 10−15eV/s
⎛
⎞
1
1
(3.00 × 108 m/s) ⎜
−
⎟
⎝ 310 nm 420 nm ⎠
Returning to the two original equations, we multiply each equation by its wavelength:
65
(0.65 eV)(420 nm) = hc − φ (420 nm) and (1.69 eV)(310 nm) = hc − φ (310 nm)
and solving for φ by subtracting, we obtain
φ=
(1.69 eV)(310 nm) − (0.65 eV)(420 nm)
= 2.28 eV
420 nm − 310 nm
34. The photon’s momentum is p = h / λ = (1240 eV ⋅ nm) / c(192 nm) = 6.46 eV/c and its
energy is 6.46 eV. The work function of aluminum is 4.08 eV, so the maximum
kinetic energy of the photoelectron is 6.46 eV – 4.08 eV = 2.38 eV. The momentum
of the electron is
p = 2mK =
1
1
2mc 2 K =
2(511, 000 eV)(2.38 eV) = 1560 eV/c
c
c
Conservation of momentum requires that pphoton = patom − pelectron , taking the initial
direction of the photon as positive. Thus
patom = pphoton + pelectron = 6.46 eV/c + 1560 eV/c = 1566 eV/c
K atom
2
c 2 patom
(1566 eV) 2
=
=
= 4.88 × 10−5 eV
2
6
2matom c
2(26.98 u)(931.5 ×10 eV/u)
This energy is negligible compared with the energy of the electron. The relatively
heavy atom can take the recoil momentum at very little cost in energy.
35. (a) At T = 1150 K,
2.898 × 10−3 m ⋅ K 2.898 × 10−3 m ⋅ K
=
= 2.52 μ m
λmax =
T
1150 K
(b)
hc
1240 eV ⋅ nm
=
= 4.9655
−3
λmax kT (2.898 × 10 m ⋅ K)(8.617 × 10−5 eV/K)
Comparing I(2λmax) with I(λmax), we obtain
I (2λmax ) (λmax )5
=
I (λmax ) (2λmax )5
⎡ e hc / λmax kT − 1 ⎤ 1 ⎡ e 4.9655 − 1 ⎤
⎢ hc / 2 λmax kT ⎥ = ⎢ 4.9655/ 2 ⎥ = 0.405
− 1 ⎦ 32 ⎣ e
− 1⎦
⎣e
36. Ke is largest when E′ is smallest (because K e = E − E ′ ) and thus when 1/E′ is largest,
which occurs when cos θ = −1 (that is, when θ = 180°).
66
1 1
2
me c 2 + 2 E
= +
=
E ′ E me c 2
Eme c 2
Ke = E − E ′ = E −
37. With dI = I (λ ) d λ =
so
E′ =
Eme c 2
me c 2 + 2 E
2E 2
Eme c 2
=
me c 2 + 2 E me c 2 + 2 E
2π hc 2
1
λ5
e hc / λ kT − 1
d λ , we solve to get e hc / λ kT = 1 +
2π hc 2 d λ
and
λ 5 dI
solving for T then gives
T=
hc
⎛ 2π hc 2 d λ ⎞
λ k ln ⎜1 +
λ 5 dI ⎟⎠
⎝
(1240 eV ⋅ nm)(10−7 cm/nm)
⎛ 2π (6.626 ×10−34 J ⋅ s)(2.997 × 108 m/s) 2 (0.00833 × 10−2 m) ⎞
(0.133 cm)(8.617 ×10−5 eV/K)ln ⎜ 1+
⎟
(0.133 × 10−2 m)5 (1.440 × 10−7 W/m 2 )
⎝
⎠
= 2.724 K
=
38. The radiation intensity per unit wavelength interval is I(λ). The peak wavelength can
be found from Wien’s displacement law:
λmax =
2.8978 × 10−3 m ⋅ K
= 1.0634 × 10−3 m
2.7250 K
It is convenient for this calculation to evaluate the quantity hc / λ kT , using Wien’s
law to substitute for the product λT :
hc
(1240 eV ⋅ nm)(10−9 m/nm)
=
= 4.9659
λ kT (8.617 ×10−5 eV/K)(2.8978 ×10−3 m ⋅ K)
and thus e hc / λ kT = 143.44 . The intensity at this temperature and wavelength is
I (λ ) =
2π hc 2
1
λ5
e hc / λ kT − 1
=
2π (6.626 ×10−34 J ⋅ s)(2.997 ×108 m/s) 2
= 1.9306 × 10−3 W/m3
−3
5
(1.0634 ×10 m) (143.44 − 1)
The change in intensity corresponding to a small temperature difference is
ΔI =
dI
2π hc 2
e hc / λ kT
ehc / λ kT ⎛ hc ⎞
⎛ hc ⎞
ΔT =
Δ
=
(
)
T
R
λ
⎜
⎟ ΔT
dT
e hc / λ kT − 1 ⎝ λ kT 2 ⎠
λ 5 (ehc / λ kT − 1) 2 ⎜⎝ λ kT 2 ⎟⎠
2 ×10−5
⎛ 143.44 ⎞
= (1.9306 × 10−3 W/m3 ) ⎜
= 7.1× 10−8 W/m3
(4.9659)
⎟
142.44
2.7250
⎝
⎠
67
Measuring this tiny difference in the radiation intensity is roughly like trying to tell
the difference between a 60 W bulb and a 100 W bulb from a distance of 4 miles.
39. (a) According to Wien’s law, the maximum radiation intensity is emitted at a
wavelength of λmax = (2.8977 × 10−3 m ⋅ K) /(2.725 K) = 1.063 × 10−3 m = 1.063 mm .
This is within the desired wavelength range, so the spectrometer records the
maximum intensity at this wavelength. With
hc
(1240 eV ⋅ nm)(10−9 m/nm)
=
= 4.968
λ kT (1.063 ×10-3 m)(8.617 ×10−5 eV/K)(2.725 K)
we have
dI max = I (λmax )d λ =
=
2π hc 2
λ
5
max
1
e
hc / λmax kT
−1
dλ
2π (6.626 × 10−34 J ⋅ s)(2.997 × 108 m/s) 2
1
(3.0 × 10−7 m) = 5.79 × 10−10 W/m 2
5
4.968
−3
(1.063 × 10 m)
−1
e
The intensity falls off from the maximum in both directions, so the minimum
intensity must occur at one of the endpoints. For the endpoint at λ1 = 0.5 mm , we find
as above hc / λ1kT = 10.56 and dI1 = I (λ1 )d λ = 9.31× 10−11 W/m 2 , and for the
endpoint at λ2 = 5.0 mm , hc / λ2 kT = 1.056 , and dI1 = I (λ1 )d λ = 1.91× 10−11 W/m 2 .
Clearly the minimum intensity would be recorded at λ2 .
(b) The area of the detector is A = π r 2 = π (0.0043 m) 2 = 5.81× 10−5 m 2 . At the
maximum intensity, the photon energy is
E = hc / λ = (1240 eV ⋅ nm) /(1.063 ×106 nm) = 1.167 ×10−3 eV = 1.869 × 10−22 J
The number of photons striking the detector per unit time is
N = (5.79 × 10−10 W/m 2 )(5.81× 10−5 m 2 ) /(1.869 × 10−22 J/photon) = 1.81× 108 photons/s
At the wavelength corresponding to the minimum intensity, we have a photon energy
of E = 3.973 × 10−23 J and a rate of N = 2.97 × 107 photons/s .
40.
λ′ = λ +
h
(1 − cos θ ) = 7.52 pm + (2.426 pm)(1 − cos180°) = 12.37 pm
mc
68
p=
1 hc 1 1240 eV ⋅ nm
=
= 1.65 ×105 eV/c = pinitial
c λ c 0.00752 nm
p′ =
1 hc 1 1240 eV ⋅ nm
=
= 1.00 × 105 eV/c in negative direction
c λ ′ c 0.01237 nm
With pfinal = pe − p′ and pinitial = pfinal , we have
pe = p + p′ = 1.65 ×105 eV/c + 1.00 ×105 eV/c = 2.65 ×105 eV/c
41. The initial speed of the atom can be expressed as v = c(125.0 m/s)/(2.997 × 108 m/s) =
4.171 × 10−7c. The initial momentum (which is nonrelativistic at this low speed) is
1
v 1
pi = mv = mc 2 = (1.007825 u)(931.5 ×106 eV/u)(4.171×10 −7 ) = 391.6 eV/c
c
c c
The photon momentum, which is in the opposite direction, has magnitude
p=
1 hc 1 1240 eV ⋅ nm
=
= 12.8 eV/c
97 nm
c λ c
The atom’s final momentum is pf = pi − p = 391.6 eV/c − 12.8 eV/c = 378.8 eV/c and
its speed is
vf =
pf
pc
378.8 eV
=c f 2 =c
= 4.035 × 10−7 c = 120.9 m/s
6
m
mc
(1.007825 u)(931.5 × 10 eV/u)
So the change in the speed of the atom is 125.0 m/s − 120.9 m/s = 4.1 m/s.
42. (a) From the equation for the Doppler shift (Eq. 2.22 converted from frequency to
energy and evaluated for small speeds), E ′ = E (1 + v / c) , we solve for v to find
2.41 keV
⎛ E′ − E ⎞
v = c⎜
= 0.0047c
⎟=c
511 keV
⎝ E ⎠
(b) The speed of the electron is so small that we may safely use nonrelativistic
equations:
2
⎛v⎞
K = 12 mv 2 = 12 mc 2 ⎜ ⎟ = 12 (511, 000 eV)(0.0047) 2 = 5.6 eV
⎝c⎠
As we learn in Chapter 10, this is a very typical value for the electrons in a solid.
69
43. Suppose the electron moves with velocity v in the x direction, and let the photon be
emitted at an angle θ with momentum p and energy E. After emission of the photon,
the electron moves with velocity v′ ay an angle φ. Then conservation of x and y
components of momentum gives
me v
1− v / c
2
2
=
me v′ cos φ
1 − v′ / c
2
2
+ p cos θ
0=
and
me v′ sin φ
1 − v′2 / c 2
− p sin θ
Squaring and adding these two equations, we obtain
me2v 2
me2 v′2
2me v′p
cos(θ + φ )
=
+ p2 −
2
2
2
2
1− v / c
1 − v′ / c
1 − v′2 / c 2
Conservation of energy gives Ee = Ee′ + pc , or
me c 2
1 − v2 / c2
=
me c 2
1 − v′2 / c 2
+ pc
Cancelling the common factor of c and squaring, we find
me2c 2
me2c 2
2 pme c
=
+ p2 +
2
2
2
2
1− v / c
1 − v′ / c
1 − v′2 / c 2
Now we subtract the results of the energy and momentum equations:
me2 ( c 2 − v 2 ) me2 ( c 2 − v′2 )
2me p
=
+
[ c + v′ cos(θ + φ )]
2
2
2
2
1− v / c
1 − v′ / c
1 − v′2 / c 2
0=
2me p
1 − v′2 / c 2
[ c + v′ cos(θ + φ )]
The quantity in the square brackets can never be zero (because v′ < c), so the only
way the right side of this equation can be zero is if p = 0 – that is, no photon is
emitted! Thus it is not possible to have a photon emitted by an electron and satisfy
both momentum and energy conservation.
It is easier to analyze this problem if we switch to a frame of reference in which the
electron is at rest. The total initial energy is just the electron’s rest energy, mec 2 . If
the electron were to emit a photon of energy E, the final energy would be
K e + me c 2 + E , which is equal to the initial energy only if Ke = 0 and
E = 0, which again shows that no photon can be emitted.
70
44. Let E be the energy of the initial photon, and let pe and Ke be the momentum and
kinetic energy of each of the three electrons after the encounter. Then momentum
conservation gives
E
= 3 pe
c
E 2 = 9( pec ) 2
or
(where E/c is the momentum of the initial photon), and energy conservation gives
E + me c 2 = 3Ee = 3 ( pe c ) 2 + ( me c 2 ) 2
Squaring this expression, we obtain
E 2 + 2 Eme c 2 + me2c 4 = 9( pec )2 + 9( me2 c 4 )
Combining the energy and momentum results, we find
2 Eme c 2 + me2c 4 = 9( me2c 4 )
or
E = 4me c 2
The total initial energy of the electron + photon is then E + mec 2 = 5me c 2 . The final
energy is 3Ee = 3( me c 2 + K e ) . Equating the initial and final energies, we obtain
5me c 2 = 3( me c 2 + K e )
so
71
K e = 23 me c 2
Chapter 4
This chapter presents some of the experimental evidence for the wave nature of
particles (including the results of several beautiful particle diffraction experiments). The
resulting considerations affecting indeterminacy are discussed, followed by the
representation of the behavior in terms of wave packets. Some students may find the
latter material mathematically challenging, especially those who are not yet familiar with
Fourier analysis.
I have chosen to sidestep issues related to the nature of quantum reality, not
because I find them uninteresting but rather because such philosophical discussions are
not appropriate in a course at this level. I have given in the reading list below some
references that deal with these issues.
Students who are still reasoning from a semiclassical perspective will often fall
into a “hidden-variable” mode of thinking: the particle has a definite location somewhere
in the wave packet, and by measurement we find out what that location is (or was). It’s a
rather large leap to get to the view that the particle does not have a location but that it is
the measurement that imparts a location to the particle. A full discussion of such issues
would invoke the EPR (Einstein, Podolsky, Rosen) argument, Bell’s theorem, and the
experiments that showed the violations of Bell’s inequality and thus agreement with the
traditional Copenhagen interpretation. Along with entanglement, teleportation, and
quantum computing, those are topics for a more detailed or higher-level presentation, but
interested students can be referred to one of the general presentations in the reading list.
Supplemental Materials
Chapter 5 of Physlet Quantum Physics offers several simulations showing particle
diffraction experiments, wave packet construction, and the uncertainty principle.
I often use the particle double-slit simulation “Doppelspalt” that can be found in
the archives of the University of Munich physics education research group at:
http://www.didaktik.physik.uni-muenchen.de/archiv/inhalt_materialien/doppelspalt/index.html.
This program allows one to simulate diffraction experiments with different particles,
adjust the particle energy and slit separation, and symbolically choose whether or not to
detect the passage of the particles through the slits.
Suggestions for Additional Reading
For a delightful account of a world in which Planck’s constant is so large that quantum
effects are ordinary, see G. Gamow, Mr. Tompkins in Paperback (Cambridge University
Press, 1967). Another nonmathematical discussion of quantum theory is B. Hoffmann,
The Strange Story of the Quantum (Dover, 1959). An imaginary dialogue, in which the
protagonists of Galileo’s dialogues are reunited to discuss quantum theory, measurement,
and uncertainty, is in J. M. Jauch, Are Quanta Real? (Indiana University Press, 1973).
The paradox of Schrodinger’s cat is discussed in this last reference. Other references, in
72
which the philosophy of quantum theory is mixed with mathematics at about the same
level as this text, are as follows:
R. P. Feynman, R. B. Leighton, and M. Sands, The Feynman Lectures on Physics
(Addison-Wesley, 1965). Chapters 1 to 3 of Volume 3 are particularly good
introductions to quantum waves and the philosophy of measurement.
R. Resnick and D. Halliday, Basic Concepts in Relativity and Early Quantum Theory
(Macmillan, 1992). Chapter 6 discusses the wave nature of particles and the
uncertainty principle.
E. H. Wichmann, Quantum Physics, Volume 4 of the Berkeley Physics Course (McGrawHill, 1971).
For a discussion of the uncertainty principle, see:
G. Gamow, “The Principle of Uncertainty,” Scientific American 198, 51 (January 1958).
A translation of Claus Jonsson’s 1959 article on the electron double-slit experiment is
given in American Journal of Physics 42, 4 (1974). This short, clearly written paper is
very readable and is highly recommended as an example of the careful experimental
technique that is necessary in doing interference experiments to illustrate the wave nature
of particles.
More recent experiments, in which an electron microscope has been used to
demonstrate beautiful interference and diffraction effects with electrons, can be found in:
P. G. Merli, G. F. Missiroli, and G. Pozzi, American Journal of Physics 44,306 (1976).
G. Matteucci and G. Pozzi, American Journal of Physics 46, 619 (1978).
A. Tonomura, J. Endo, T. Matsuda, T. Kawasaki, and H. Ezawa, American Journal
of Physics 57, 117 (1989).
G. Matteucci, American Journal of Physics 58, 1143 (1990).
A summary of experiments demonstrating interference and diffraction effects with
neutrons is:
R. Gahler and A. Zeilinger, American Journal of Physics 59, 316 (1991).
Some readable and nontechnical presentations of quantum measurement issues and more
recent considerations (such as Bell’s theorem and its experimental tests):
J. Baggott, The Quantum Story: A History in 40 Moments (Oxford University Press, 2011).
P. C. W. Davies and J. R. Brown, eds., The Ghost in the Atom (Cambridge University
Press, 1986).
G. Greenstein and A. Zajonc, The Quantum Challenge (Jones and Bartlett, 1997).
J. Gribben, Schrodinger’s Kittens and the Search for Reality (Little, Brown & Co., 1995).
D. F. Styer, The Strange World of Quantum Mechanics (Cambridge University Press, 2000).
73
Materials for Active Engagement in the Classroom
A. Reading Quizzes
1. De Broglie waves:
(1) are a form of electromagnetic radiation.
(2) are a basic property of all particles, whether at rest or in motion.
(3) travel at the speed of light.
(4) describe the wave-type behavior of moving particles.
2. The deBroglie wave of a particle can best be described as:
(1) a form of electromagnetic wave.
(2) a characteristic of the oscillation of the particle.
(3) a probability wave.
(4) none of the above.
3. Which of the following is NOT true about the deBroglie wavelength?
(1) It is larger for an electron than for a baseball moving at the same speed.
(2) It applies only to charged particles.
(3) It describes the wave properties of particles such as electrons.
(4) It is a property of waves of probability.
4. The uncertainty relationships:
(1) apply to all types of waves.
(3) apply only to classical waves.
Answers
1. 4
2. 3
3. 2
(2) apply only to de Broglie waves.
(4) apply only to light waves.
4. 1
B. Conceptual or Discussion Questions
1. In the following situations, choose which particle has the larger de Broglie
wavelength:
(1) the electron
(2) the proton
(3) they are both the same
(a) An electron and a proton moving with the same momentum.
(b) An electron and a proton moving at the same speed.
(c) An electron and a proton with the same nonrelativistic kinetic energy.
(d) An electron and a proton with the same kinetic energy, in both cases much larger
than the rest energy.
2. Why is it not possible to observe double-slit interference with baseballs?
(1) The de Broglie wavelength of a baseball is too large.
(2) The de Broglie wavelength of a baseball is too small.
(3) Baseballs are too large to fit through a double-slit apparatus.
(4) Baseballs can't be accelerated to the speed of light.
74
3. A beam of electrons moving with speed v passes through a single slit and strikes a
screen, where it forms a diffraction pattern with a bright central maximum and some
less intense maxima on either side of center.
(a) If the speed of the electrons is increased to 2v, what happens to the width of the
central maximum?
(1) Increases
(2) Decreases
(3) Remains the same
(b) If the beam of electrons is replaced with a beam of protons moving with speed v,
what happens to the width of the central maximum compared with that of electrons
moving with the same speed?
(1) Increases
(2) Decreases
(3) Remains the same
4. Suppose an electron is moving at speed v. In terms of v, what would be the speed of a
baseball with the same deBroglie wavelength as the electron?
(1) v (2) 1010v (3) 10−10v (4) 10−20v (5) 10−30v
5. A beam of monoenergetic electrons is incident on a mask that contains a single
narrow slit. A pattern of diffraction maxima and minima appears on the screen.
(a) If the slit width is halved, the diffraction minima on the screen would then be:
(1) closer together (2) farther apart (3) unchanged
(b) If the kinetic energy of the electrons in the original experiment is halved, the
diffraction minima on the screen would be:
(1) closer together (2) farther apart (3) unchanged
(c) Suppose the beam of electrons were replaced with a beam of particles of greater
mass, such that the resultant diffraction pattern was exactly the same as that in the
original experiment. To accomplish this, the kinetic energy of the new particles
would be:
(1) greater than that of the original electrons
(2) less than that of the original electrons
(3) equal to that of the original electrons
6. (a) A packet of water waves of width Δx contains a range of wavelengths Δλ about a
central wavelength λ; that is, the range of wavelengths is from about λ - Δλ/2 to
λ + Δλ/2. If the packet were made half as wide, what would be the new range of
wavelengths?
(1) 2Δλ
(2) Δλ/2
(3) Δλ
(4) None of these
(b) A whistle blast lasts for a time interval Δt. It consists of a central frequency ν
with a range Δν. If the blast were made twice as long, what would be the new range
of frequencies?
(1) 2Δν
(2) Δν/2
(3) Δν
(4) None of these
(c) A beam of electrons of momentum px moving in the x direction passes through a
slit of width Δy = a. The beam diffracts through the slit so that the range in its y
momentum is Δpy, that is, from -Δpy/2 to + Δpy/2. What is the new range in the y
momentum if the slit is made half as wide?
(2) Δpy/2
(3) Δpy
(4) None of these
(1) 2Δpy
75
7. Consider the following three experiments:
(a) The x component of the position of an electron is measured to within ±Δx, and
simultaneously the x component of its momentum is measured to within ±Δpx.
(b) The x component of the position of an electron is measured to within ±Δx, and
then later the x component of its momentum is measured to within ±Δpx.
(c) The x component of the position of an electron is measured to within ±Δx, and
simultaneously the y component of its momentum is measured to within ±Δpy.
In which of these cases does the uncertainty principle NOT impose a limitation on the
outcome of the experiment?
(1) a only
(2) b only
(3) c only
(4) a and b only
(5) a and c only
(6) b and c only
(7) a, b, and c
Answers
1. (a) 3 (b) 1 (c) 1 (d) 3
2. 3 3. (a) 2 (b) 2
4. 5
5. (a) 2 (b) 2 (c) 2
6. (a) 1 (b) 2 (c) 1
7. 6
76
[Note to instructors: The following worksheet can serve as a transition between the
material covered in chapters 4 and 5.]
DeBroglie Wave Worksheet
A particle of momentum p moving in the x direction is represented by a deBroglie wave
of wavelength λ = h/p. Suppose the deBroglie wave has amplitude A. Then the
probability to find the particle in any small interval of width dx is proportional to the
square of the amplitude: probability ∝ |A|2dx.
1. First consider a free particle – no forces act on the particle anywhere in space. The
particle (of mass m) is moving in the x direction with speed v. Write an expression that
could represent the deBroglie wave of this particle. Your wave equation should be a
function of both x and t.
Consider an interval of width dx located somewhere on the x axis. What is the
probability to locate the particle in that interval?
How does that probability change as the interval is moved to different locations along the
x axis? Explain.
How does the probability to locate the particle in any interval depend on the time?
Explain.
2. Suppose now there is a constant potential energy U0 everywhere along the x axis, from
x = −∞ to x = +∞. Describe how your answers to the above questions would change.
Assume the particle is moving with the same speed v.
77
3. Now suppose that the potential energy changes at x = 0:
U(x) = U0 x < 0
U(x) = U1 x > 0
Assume U1 > U0 (both are positive) and assume that the kinetic energy of the particle is
greater than U1. Let the particle be originally moving in the region x < 0 with speed v0
toward the origin. How does λ0, the wavelength of the deBroglie wave in the region x <
0, compare with λ1, the wavelength of the deBroglie wave in the region x > 0?
(2) λ0 < λ1
(3) λ0 > λ1
(1) λ0 = λ1
Explain.
How would you expect the probability P0 to locate the particle in a small interval dx
somewhere in the region x < 0 to compare with the probability P1 to locate it in a similar
interval in the region x > 0? (Think about the speed of the particle in the two regions.)
(2) P0 < P1
(3) P0 > P1
(1) P0 = P1
Explain.
Describe the deBroglie wave that would represent this particle and sketch the waveform.
Be especially careful to think about how the wave changes when it passes through x = 0,
and be sure your sketch is consistent with your answers to the above questions about how
the wavelength and the probability differ in the two regions.
4. Suppose we have trapped a particle in a region of space of length L:
U(x) = +∞
x<0
U(x) = 0
0<x<L
U(x) = +∞
x>L
Describe the physical motion of the particle in this case.
How would you represent the deBroglie wave for this particle? To what classical wave
phenomenon is this similar?
78
Sample Exam Questions
A. Multiple Choice
1. A particle has a lifetime of 3.2 × 10-23 s. The rest energy of the particle is about 600
MeV. What range of values will most likely result from a measurement of its rest
energy?
(a) 599 to 601 MeV (b) 590 to 610 MeV (c) 500 to 700 MeV (d) 0 to 1200 MeV
2. What is the kinetic energy of a proton whose deBroglie wavelength is 15.4 fm?
(a) 80.5 MeV
(b) 3.45 MeV
(c) 6340 MeV
(d) 6.90 MeV
3. What is the de Broglie wavelength of an electron with a kinetic energy of 12.8 eV?
(a) 96.9 nm (b) 0.34 nm (c) 16.8 nm (d) 0.66 nm
4. Experiments to measure the rest energy of a highly unstable elementary particle give
a distribution of values centered at 2500 MeV with a width of ±40 MeV. Assuming
the width is not due to any defect in the measuring instrument, what is the best
estimate for the lifetime of the particle?
(b) 10−21 s
(c) 10−23 s
(d) 10−25 s
(a) 10−19 s
5. A sodium atom, a neutron, a proton, and an electron all have the same nonrelativistic
kinetic energy. Which has the smallest de Broglie wavelength?
(a) sodium atom
(b) neutron
(c) proton
(d) electron
6. Which of the following does NOT provide evidence for the wave nature of matter?
(a) the photoelectric effect
(b) neutron diffraction
(c) the Heisenberg relationships
(d) electron diffraction
Answers
1. b
2. b
3. b
4. c
5. a
6. a
B. Conceptual
1. A beam of electrons of speed v is incident on a double slit and then strikes a screen
where it is made visible. If the speed of the electrons is increased, does the spacing
between the bright regions on the screen increase, decrease, or remain the same?
EXPLAIN YOUR ANSWER.
2. An electron is trapped in a region of space between two walls that are a distance L
apart. Measurements of the kinetic energy of the electron give an average value of E.
If the walls are moved closer together, will the average kinetic energy increase,
decrease, or remain the same? EXPLAIN YOUR ANSWER.
79
3. A beam of electrons with kinetic energy K1 is incident on a single slit of width a.
After passing through the slit, the beam strikes a screen where it is made visible. At
the center of the screen directly in front of the slit, the intensity of the pattern on the
screen is I1. If the kinetic energy of the beam is increased (keeping the slit width and
the number of electrons per second constant), does the intensity of the pattern at the
center of the screen increase, decrease, or remain the same? EXPLAIN YOUR
ANSWER.
4. A beam of electrons of kinetic energy K is incident on a tiny hole of diameter D in a
metal foil. Electrons that pass through the hole strike a screen where they produce a
visible image. Most of the electrons appear concentrated in a bright spot at the center
of the screen. If the kinetic energy of the electrons is increased, does the size of the
central spot on the screen increase, decrease, or remain the same? EXPLAIN YOUR
ANSWER.
5. Atomic masses are often given in mass units (u) to an accuracy of six decimal places.
A certain atom is very unstable, with a lifetime of about 10-20 s. Does this short
lifetime have a large effect or a negligible effect on our ability to determine the mass
of this atom to the desired precision of 10-6 u? EXPLAIN YOUR ANSWER.
6. The rest energies of two particles are measured in the laboratory. The measurements
on particle A show a distribution of values centered at 500 MeV but with a spread of
about ±10 MeV. Measurements on particle B show a distribution centered at 200
MeV but with a spread of about ±20 MeV. The measurements are done with
equipment of very great precision (typically 1 eV). When measurements are made of
the lifetimes of the two particles, is the lifetime of particle A greater than, less than,
or equal to the lifetime of particle B? EXPLAIN YOUR ANSWER.
7. A beam of electrons of speed v is incident on a single slit and then strikes a screen
where it is made visible. If the speed of the electrons is increased, does the width of
the central bright region on the screen increase, decrease, or remain the same?
EXPLAIN YOUR ANSWER.
8. An electron is represented by a wave packet of length d. The electron cannot be at
rest, but must have a certain minimum kinetic energy K. If the size of the electron’s
wave packet is doubled to 2d, does the minimum kinetic energy increase, decrease,
or remain the same? EXPLAIN YOUR ANSWER.
9. A beam of electrons passes through a narrow hole and then strikes a screen. After the
beam passes through the hole, it is found that the beam spreads because the electrons
have acquired an average momentum of p transverse (perpendicular) to the direction
of their original motion. If the hole is made larger, does the average transverse
momentum become larger, become smaller, or stay the same? EXPLAIN YOUR
ANSWER.
80
10. Consider the following three experiments: (a) The position of an electron is measured
to within Δx, and simultaneously the x component of its momentum is measured to
within Δpx. (b) The position of an electron is measured to within Δx, and then later
the x component of its momentum is measured to within Δpx. (c) The position of an
electron is measured to within Δx, and simultaneously the y component of its
momentum is measured to within Δpy.
In which of these cases (possibly more than one) does the uncertainty principle NOT
impose a limitation on the outcome of the experiment? EXPLAIN YOUR ANSWER.
Answers
1. decrease
2. increase
6. greater than 7. decrease
3. increase
8. decrease
4. decrease
5. large
9. become smaller
10. b,c
C. Problems
1. A certain solid is composed of molecules of diameter 0.30 nm (1 nm = 10-9 m). You
are assigned the task of forming an image of the molecules in this solid by using
neutron scattering.
(a) What value should you choose for the kinetic energy of the neutrons?
(b) The molecule consists of several atoms. If you wanted instead to produce images
of the individual atoms rather than the entire molecule, should you increase or
decrease the kinetic energy of the neutrons? Explain your answer.
2. In a certain experiment, the momentum of a beam of electrons is measured to have a
value of 14.2 keV/c, with a spread in values of ±0.7 keV/c.
(a) What is the minimum size of the apparatus containing the electrons that is
necessary to make this measurement?
(b) What is the deBroglie wavelength of these electrons?
(c) If an experiment were done to measure the wavelength of the electrons (for
example, a double-slit interference experiment), there will be a distribution of values
about some central mean or average wavelength. How likely would it be to find a
particular value for the wavelength that is 15% larger or smaller than the mean value?
Very likely? Somewhat likely? Very unlikely? Explain your answer.
3. (a) An electron is moving in the x direction with a speed of 0.0045c. What is its de
Broglie wavelength?
(b) The electron is confined to a region of space along the x axis that is 0.236 nm in
length. What range of values will most likely result from a measurement of its speed
in the x direction?
(Hint: You can work this problem either in SI units or in eV units.)
81
4. (a) Calculate the uncertainty in momentum for a proton confined to a nucleus of
radius 6.0 fm.
(b) What is the kinetic energy of a proton with that momentum?
(c) Suppose a proton in that nucleus had a kinetic energy of 5.6 MeV. If the proton
were represented by a deBroglie wave, how many wavelengths could fit across the
diameter of that nucleus?
5. (a) Find the de Broglie wavelength of electrons moving with a speed of 1.63 × 105 m/s.
(b) Suppose these electrons are described by a wave packet of width 2.65 nm. What
range of values will most likely result from a measurement of the speed of the
electrons?
(c) What range of values would most likely result from a measurement of the
wavelength of these electrons?
6. An electron moving at a speed of 0.0202c is trapped in an atomic-sized region of
width 0.12 nm.
(a) What range of values would likely result from a measurement of the speed of the
electron?
(b) Find the de Broglie wavelength of the electron and sketch its wave packet.
Answers
1. (a) 0.0091 eV (b) decrease
2. (a) 0.28 nm (b) 0.0873 nm (c) Very unlikely
3. (a) 837 eV/c or 0.54 nm (b) 0.0029c to 0.0061c
4. (a) 16.5 MeV/c (b) 0.144 MeV (c) 1
5. (a) 4.46 nm (b) 1.19 × 105 m/s to 2.07 × 105 m/s (c) 3.26 nm to 5.66 nm
6. (a) 0.0170c to 0.0234c (b) 0.12 nm
82
Problem Solutions
mc 2 , so we use nonrelativistic kinetic energy.
1. (a) At 5 MeV, K
1
1
2mc 2 K =
2(938.3 MeV)(5 MeV) = 96.9 MeV/c
c
c
hc 1240 MeV ⋅ fm
=
= 13 fm
λ=
96.9 MeV
pc
p = 2mK =
mc 2 , so the extreme relativistic approximation E = pc is valid.
(b) In this case K
λ=
hc hc 1240 MeV ⋅ fm
=
=
= 0.025 fm
pc E
50 × 103 MeV
(c) The speed is small compared with c, so nonrelativistic formulas apply. With
v / c = (1.00 ×106 m/s)/(3.00 × 108 m/s) = 0.00333.
λ=
2. (a)
h
h
hc
1240 eV ⋅ nm
=
=
=
= 0.73 nm
2
p mv ( mc )( v / c ) (511,000 eV)(0.00333)
K = 23 kT = 23 (8.6174 × 10−5 eV/K)(293 K) = 0.0379 eV
(b) The neutrons are nonrelativistic, so
1
1
2mc 2 K =
2(939.6 × 106 eV)(0.0379 eV) = 8.44 × 103 eV/c
c
c
hc 1240 eV ⋅ nm
=
= 0.147 nm
λ=
pc 8.44 × 103 eV
p = 2mK =
3. (a) p =
h
λ
=
1 hc 1 1240 MeV ⋅ fm
=
= 135.4 MeV/c
9.16 fm
c λ c
From p = mv / 1 − v 2 / c 2 = (1/ c )mc 2 ( v / c) / 1 − v 2 / c 2 we solve for v:
v=
(b)
c
1 + ( mc 2 / pc )2
=
c
1 + [(938.3 MeV)/(135.4 MeV)]2
= 0.143c
K = E − E0 = ( pc ) 2 + ( mc 2 ) 2 − mc 2
= (135.4 MeV) 2 + (938.3 MeV) 2 − 938.3 MeV = 9.72 MeV
83
This gain in kinetic energy requires a loss in potential energy of ΔU = −9.72 MeV
and thus a potential difference of ΔV = ΔU / q = −9.72 MeV/e = −9.72 MV .
4. With ΔU = qΔV = ( + e)( −2.36 × 105 V) = −0.236 MeV , we have
ΔK = −ΔU = +0.236 MeV . Then
1
1
2mc 2 K =
2(938.3 MeV)(0.236 MeV) = 21.0 MeV/c
p = 2mK =
c
c
λ=
hc 1240 MeV ⋅ fm
=
= 59.0 fm
21.0 MeV
pc
5. (a) For λ = 12 nm,
h
p=
λ
=
1 hc 1 1240 eV ⋅ nm
=
= 100 eV/c
12 nm
c λ c
(100 eV)2
p2
p 2c 2
K=
=
=
= 0.010 eV
2m 2mc 2 2(511,000 eV)
To increase the kinetic energy by ΔK = 0.010 eV, its potential energy must decrease
by ΔU = −ΔK , where ΔU = q ΔV :
ΔV =
ΔU −ΔK −0.010 eV
=
=
= +0.010 V
−e
q
q
(b) For λ = 0.12 nm,
p=
K=
h
λ
=
1 hc 1 1240 eV ⋅ nm
=
= 1.0 × 104 eV/c
c λ c 0.12 nm
p2
p 2 c 2 (1.0 × 104 eV) 2
=
=
= 100 eV
2m 2mc 2 2(511,000 eV)
ΔV = −ΔK / q = +100 V
(c) For λ = 1.2 fm,
p=
Here pc
1 hc 1 1240 MeV ⋅ fm
=
= 1000 MeV/c
c λ c
1.2 fm
mc 2 , so we can use the extreme relativistic approximation:
84
K ≅ E ≅ pc = 1000 MeV = 1.0 × 109 eV
ΔV = −ΔK / q = +1.0 × 109 V
Although it is possible to accelerate electrons to such high energies, it is not done by
a single acceleration through such a large potential difference.
6. (a) The wavelength should be roughly the size of (or smaller than) the object we
want to study, so λ ≤ 0.10 μm.
(b) Corresponding to λ ≤ 0.10 μm,
p=
K=
h
λ
=
1 hc 1 1240 eV ⋅ nm
=
= 12.4 eV/c
c λ c 100 nm
p2
p 2c 2
(12.4 eV) 2
=
=
= 1.5 × 10−4 eV
2m 2mc 2 2(511,000 eV)
ΔV = ΔU / q = −ΔK / q = +1.5 × 10−4 V
This is a lower limit on the accelerating voltage. If ΔV is smaller than this value, the
wavelength is too large and details of the particles could not be seen because of
diffraction effects. As ΔV is increased above this value, finer details would be
observed.
p=
7. (a)
For electrons pc
1 hc 1 1240 MeV ⋅ fm
=
= 88.6 MeV/c
c λ c
14 fm
mc 2 , so the extreme relativistic approximation is valid.
E ≅ pc = 88.6 MeV
K = E − mc 2 = 88.6 MeV − 0.5 MeV = 88 MeV
mc 2 so
(b) For neutrons, pc
p2
p 2c 2
(88.6 MeV) 2
K=
=
=
= 4.2 MeV
2m 2mc 2 2(939.6 MeV)
(c)
8. (a)
K=
p = 2mK =
p2
p 2c 2
(88.6 MeV) 2
=
=
= 1.1 MeV
2m 2mc 2 2(3727.4 MeV)
1
1
2mc 2 K =
2(3727 × 106 eV)(0.020eV) = 1.22 × 104 eV/c
c
c
85
λ=
hc 1240 eV ⋅ nm
=
= 0.10 nm
pc 1.22 × 104 eV
(b) The fringes are separated by about 9 μm.
λ=
d Δy (8 × 10−6 m)(9 × 10-6 m)
=
= 0.11 nm
D
0.64 m
9. For m = 10−9 g and taking the density to be ρ = 2 g/cm3, the volume of the particle is
V = m / ρ = (10−9 g)/(2 g/cm 3 ) = 5 × 10−10 cm3 , which corresponds to a diameter of
about 0.001 cm = 10−5 m. The spacing between the fringes is then
λD
(6.6 × 10−20 m)(5 × 106 m)
Δy =
=
= 3.3 × 10−8 m = 33 nm
−5
d
10 m
which is about the size of an atom!
d sin φ (0.215 nm)(sin 55°)
=
= 0.0881 nm
2
2
hc 1240 eV ⋅ nm
pc =
=
= 1.408 × 104 eV
0.0881 nm
λ
λ=
10.
K=
p 2 ( pc ) 2 (1.408 × 104 eV) 2
=
=
= 194 eV
2m 2mc 2 2(0.511 × 106 eV)
To achieve this kinetic energy, the electrons must be accelerated through a potential
difference of ΔV = +194 V.
11.
p = 2mK =
1
1
2mc 2 K =
2(0.511 × 106 eV)(175 eV) = 1.337 × 104 eV/c
c
c
h hc 1240 eV ⋅ nm
λ= =
=
= 0.0927 nm
p pc 1.337 × 104 eV
λ
0.0927 nm
= 15.2°
0.352 nm
For n = 1:
φ = sin −1
For n = 2:
φ = sin −1
2λ
2(0.0927 nm)
= sin −1
= 31.8°
d
0.352 nm
For n = 3:
φ = sin −1
3λ
3(0.0927 nm)
= sin −1
= 52.2°
d
0.352 nm
d
= sin −1
86
There is no diffracted beam for n = 4.
12.
The number of wave crests passing the observation point in time Δt is N = f Δt . The
uncertainty in this number is
ΔN = Δf Δt
With f = v / λ , we take differentials and obtain
df = −
v
λ
2
dλ
or
Δf =
v
λ2
Δλ
Using Δt = Δx / v (where Δx is the distance traveled by the wave in the time Δt),
⎛ v
⎞ ⎛ Δx ⎞ Δx Δλ
ΔN = Δf Δt = ⎜ 2 Δλ ⎟ ⎜ ⎟ =
λ2
⎝λ
⎠⎝ v ⎠
If the uncertainty in counting is a fraction ε of one wave ( ΔN ∼ ε ), then these results
are consistent with Δx Δλ ∼ ελ 2 and Δf Δt ∼ ε .
13. (a)
Δx = v Δt = (330 m/s)(2.0 s) = 660 m
v
330 m/s
=
= 0.33 m
f 1.0 × 103 Hz
(b)
λ=
(c)
Δλ ∼
(d)
Δf ∼
14. (a)
ελ 2
Δx
ε
Δt
=
=
(0.1)(0.33 m) 2
= 0.017 mm
(660 m)
0.1
= 0.050 Hz
2.0 s
Δx = v Δt = (25 cm/s)(4.0 s) = 1.0 × 102 cm
(b) With λ = Δx / N = (1.0 × 102 cm)/12 = 8.3 cm , we have
ελ 2
(0.1)(8.3 cm) 2
Δλ ∼
=
= 0.069 cm
Δx
1.0 × 102 cm
15. The central frequency is f = c / λ = (2.997 ×108 m/s)/(0.225 m) = 1.33 ×109 Hz . The
frequency range is
87
Δf ∼
ε
Δt
=
0.1
= 8.4 × 104 Hz
−6
1.17 × 10 s
The receiver should accept signals in a range of 8.4 × 104 Hz about a frequency of
1.33 × 109 Hz.
16.
For Δf = 104 Hz ,
Δt ∼
ε
Δf
=
0.1
= 10−5 s
4
10 Hz
The signal processing time must be at least 10−5 s.
17.
With Δv = 2.0 × 104 m/s,
1.05 × 10−34 J ⋅ s
Δx ∼
=
=
= 5.8 × 10−9 m = 5.8 nm
−31
4
Δp m Δv (9.11 × 10 kg)(2.0 × 10 m/s)
18. (a)
(b)
19.
Δp ∼
K=
Δx
=
h
1 hc
1 1240 eV ⋅ nm
=
=
= 2000 eV/c
2π Δx c 2π Δx c 2π (0.1 nm)
( Δp ) 2 ( c Δp ) 2
(2000 eV) 2
=
=
= 4 eV
2m
2mc 2
2(0.511 × 106 eV)
6.58 × 10−16 eV ⋅ s
ΔE ∼
=
= 33 MeV
Δt
2.0 × 10−23 s
Measurements of the Σ+ rest energy are likely to fall in the range 1385 MeV ± 33
MeV, or from 1352 MeV to 1418 MeV.
20.
6.58 × 10−16 eV ⋅ s
Δt ∼
=
= 5.5 × 10−24 s
6
ΔE
120 × 10 eV
21.
ΔE ∼
22.
With ΔE / E = 10−15 , we have
Δt
=
6.58 × 10−16 eV ⋅ s
= 5.5 × 10−7 eV
1.2 × 10−9 s
88
ΔE = 10−15 E = 10−15 (50 × 103 eV) = 5.0 × 10−11 eV
Δt ∼
ΔE
6.58 ×10−16 eV ⋅ s
= 1.3 × 10−5 s
−11
5.0 ×10 eV
=
23. As we did for electrons in Example 4.7, let’s find the kinetic energy of an alpha
particle with a momentum of 19.7 MeV/c:
p 2 ( pc )2 (19.7 MeV) 2
K=
=
=
= 0.052 MeV
2m 2mc 2 2(3727 MeV)
This is negligible compared with the typical kinetic energies of alpha particles
emitted in radioactive decays. Therefore, the uncertainty principle does not limit the
existence of these alpha particles inside the nucleus.
k0 +Δk / 2
k0 +Δk / 2
24.
25.
sin kx
y ( x) = ∫ A(k ) cos kx dk = A0 ∫ cos kx dk = A0
x k
k0 −Δk / 2
=
A0
[sin x(k0 + Δk / 2) − sin x(k0 − Δk / 2)]
x
=
A0
x
=
2 A0
⎛ Δk
sin ⎜
x
⎝ 2
0 −Δk / 2
⎡
x Δk
x Δk ⎛
x Δk
x Δk ⎞ ⎤
⎢sin k0 x cos 2 + cos k0 x sin 2 − ⎜ sin k0 x cos 2 − cos k0 x sin 2 ⎟ ⎥
⎝
⎠⎦
⎣
y ( x) = ∫
+∞
−∞
⎞
x ⎟ cos k0 x
⎠
+∞
A(k ) cos kx dk = A0 ∫ e − ( k − k0 )
−∞
2
/ 2( Δk ) 2
cos kx dk
Let k ′ = k − k0 .
+∞
y ( x) = A0 ∫ e − k ′
−∞
2
/ 2( Δk ) 2
[cos k ′x cos k0 x − sin k ′x sin k0 x] dk ′
The integral over the second term (involving the sines) vanishes because sin k ′x is an
odd function of k′ (the contribution of the integral from −∞ to 0 cancels the part from
0 to +∞). The remaining integral is
∞
y ( x) = 2 A0 cos k0 x ∫ e − k ′
0
89
2
/ 2( Δk ) 2
cos k ′x dk ′
The integral is a standard form that can be found in integral tables:
2
2
2
2
e − x ( Δk ) / 2
y ( x) = 2 A0 cos k0 x π
= A0 Δk 2π e − x ( Δk ) / 2 cos k0 x
2 / Δk
26.
y ( x ) = A cos(2π x / λ1 ) + A cos(2π x / λ2 ) = A[cos(2π x / λ1 ) + cos(2π x / λ2 )]
Using the identity cos x + cos y = 2 cos 12 ( x + y ) cos 12 ( x − y ) , we get directly
⎛πx πx ⎞
⎛π x π x ⎞
+
−
y ( x ) = 2 A cos ⎜
⎟ cos ⎜
⎟
⎝ λ1 λ2 ⎠
⎝ λ1 λ2 ⎠
6 4π
=
and
λ1
9 3
v
4 8π
ω2 = 2π f 2 = 2π 2 = 2π =
λ2
11 11
ω1 = 2π f1 = 2π
27.
v1
= 2π
vgroup =
28. (a)
k1 =
2π
λ1
=
2π
9
k2 =
and
2π
λ2
=
2π
11
Δω ω1 − ω2 4π / 3 − 8π /11
=
=
= 15
Δk
k1 − k2 2π / 9 − 2π /11
vphase = ω / k
vgroup =
dvphase
dk
=
dv
dω d
=
( kvphase ) = vphase + k phase
dk dk
dk
dvphase d λ dvphase d ⎛ 2π ⎞ dvphase ⎛ 2π
=
⎜
⎟=
⎜−
d λ dk
d λ dk ⎝ k ⎠
dλ ⎝ k 2
vgroup = vphase − λ
⎞ dvphase ⎛ λ ⎞
⎟=
⎜− ⎟
dλ ⎝ k ⎠
⎠
dvphase
dλ
(b) The index of refraction n for light in glass decreases as λ increases (shorter
wavelengths are refracted more than longer wavelengths); that is dn / d λ < 0 .
Because n = c / vphase , dn / d λ and dvphase / d λ have opposite signs and so
dvphase / d λ > 0. Thus vgroup > vphase .
29.
vphase =
b
λ
=
vgroup =
bk ω
=
2π k
or
ω=
b 3/ 2
k
2π
dω
b 3 1/ 2 3 bk 3
=
= vphase
k =
2π 2
2 2π 2
dk
90
K = E − mc 2 =
30.
p 2c 2 + m 2 c 4 − mc 2
dK 1 2 2
= ( p c + m 2c 4 ) −1/ 2 (2 pc 2 ) =
dp 2
pc 2
p 2c 2 + m 2c 4
=
pc 2
mv / 1 − v 2 / c 2
= c2
=v
E
mc 2 / 1 − v 2 / c 2
31. (a) With a node at each end (say, at x = 0 and x = L) and no other nodes, we must
have one half-wave between the two nodes. Thus L = λ1 / 2 or λ1 = 2 L . If there is an
additional node at the midpoint (x = L/2), then there is a full wave between the two
ends, and L = λ2 or λ2 = 2 L / 2 . The next shorter wavelength has (in addition to the
nodes at either end ) nodes at x = L/3 and x = 2L/3, so there are three half-waves
between the ends: L = 3λ3 / 2 or λ3 = 2 L / 3 . Continuing in this way, we see that in
the nth case there are n half-waves in the length L, so L = n(λn / 2) or λn = 2 L / n .
(b) With pn = h / λn = nh / 2 L , we see that cpn is of order keV, so nonrelativistic
equations can safely be used:
Kn =
pn2 c 2 pn2
(1240 eV ⋅ nm) 2
n2 h2c 2
2
=
=
=
n
= n 2 (1.50 eV)
2m 2mc 2 8mc 2 L2
8(511, 000 eV)(0.50 nm)2
Thus K1 = 1.50 eV, K 2 = 6.00 eV, K 3 = 13.5 eV.
λ=
32.
h
hc
1240 eV ⋅ nm
=
=
= 0.279 nm
p
2mc 2 K
2(940 × 106 eV)(0.0105 eV)
From the Bragg scattering formula (Eq. 3.18), we have
sin θ =
nλ (1)(0.279 nm)
=
= 0.565 or θ = 34.4°
2d 2(0.247 nm)
For second-order (n = 2) scattering at that angle, λ = (2d sin θ ) / 2 = 0.140 nm . The
wavelength is reduced by half, so the momentum is doubled and the kinetic energy
increases by a factor of 4 to 0.0420 eV. For third-order scattering (n = 3), the kinetic
energy is 9 times as great, or 0.0945 eV. The scattered beam at that angle will consist
of all energies that are n2 times the original energy (n = 1,2,3,…).
33.
(a) The mass of a nitrogen molecule is 14 u. The average molecular kinetic energy is
3
2 kT , so the de Broglie wavelength is
λ=
h
hc
1240 eV ⋅ nm
=
=
= 0.0279 nm
p
2mc 2 K
2(14 u)(931.5 × 106 eV/u)(1.5)(8.617 × 10−5 eV/K)(293 K)
91
(b) The number of nitrogen molecules per unit volume is
ρ NA
(1.292 kg/m 3 )(6.02 × 1023 molecules/mole)
n=
=
= 2.78 × 1025 molecules/m3
M
(0.028 kg/mole)
and the average spacing between molecules is n −1/ 3 = 3.30 × 10−9 m = 3.3 nm . The de
Broglie wavelength is 2 orders of magnitude smaller than the molecular spacing, so
that quantum effects are unimportant in gases at room temperature.
(c) Let’s estimate that quantum effects would be significant if the de Broglie
wavelength were about 1/10 of the molecular separation (0.33 nm):
1 hc 1 1240 eV ⋅ nm
=
= 3760 eV/c
λ c λ c 0.33 nm
(3760 eV) 2
p2
p 2c 2
=
=
= 2.71× 10−4 eV
K=
2
6
2m 2mc
2(28 u)(931.5 ×10 eV/u)
p=
h
=
.
The molecules have this tiny amount of average kinetic energy at a temperature
2K
2(2.71×10−4 eV)
T=
=
= 2.1 K
3k 3(8.617 ×10−5 eV/K)
Nitrogen is no longer a gas at this temperature, so our calculation using the formula
for the mean molecular energy of gases is not correct. However, it does suggest that
if quantum effects are to become important in gases, they will occur only at low
temperatures. (Recall the discussion in Chapter 1 about how the equipartition of
energy fails for the rotational and vibrational motions of some gases at even moderate
temperatures, so other effects of quantum behavior may be observable at these
temperatures.)
34.
For both the photon and the electron,
p=
h
λ
=
1 hc 1 1240 eV ⋅ nm
=
= 4.41× 103 eV/c
c λ c 0.281 nm
For the photon,
E = pc = 4.41×103 eV
For the electron,
p2
p 2 c 2 (4.41×103 eV) 2
K=
=
=
= 19.1 eV
2m 2mc 2 2(511, 000 eV)
92
35.
(a) The initial nucleus is at rest, the final momenta of the helium and the neutron
must sum to zero: pn + pHe = 0 , and so pn = − pHe . The energy released in the decay
appears as the kinetic energy of the final products: K n + K He = 0.89 MeV . Using
nonrelativisitc kinetic energies, we have
K n + K He =
p2
pn2
p2
p2
p2 ⎛
m ⎞
+ He = n + n = n ⎜ 1 + n ⎟ = 0.89 MeV
2mn 2mHe 2mn 2mHe 2mn ⎝ mHe ⎠
Kn =
(b)
ΔE ∼
Δt
=
0.89 MeV 0.89 MeV
=
= 0.71 MeV
1 + mn / mHe
1 + 1/ 4
6.58 ×10−16 eV ⋅ s
= 0.66 MeV
1.0 ×10−21 s
The measured neutron energies will then be in the range 0.89 MeV ± 0.66 MeV. The
neutron energy is not very well defined in this process.
36.
(a) Δpx ∼
Δx
=
1 hc
1 1240 eV ⋅ nm
=
= 2.0 ×10−5 eV/c
c 2πΔx c 2π (1.0 cm)
(b) ( p 2 )av = ( px2 + p y2 + pz2 )av = (Δpx ) 2 + (Δp y ) 2 + (Δpz ) 2 = 3(Δpx ) 2
using Eq. 4.15, where the last step can be made because all three components of the
momentum have the same uncertainty.
K av =
( p 2 )av 3(cΔpx ) 2 3(2.0 ×10−5 eV) 2
=
=
= 1.2 × 10−15 eV
2
2m
2mc
2(511,000 eV)
(c) The 1 cm3 piece of copper has a mass of (1 cm3)(8.95 g/cm3) = 8.95 g. The molar
mass of copper is 63.5 g, so the cube is (8.95 g)/(63.5 g/mole) = 0.141 mole. As a
rough estimate, let’s assume that the heat capacity of copper remains constant for
most of the region from T = 0 K to 300 K (the heat capacity in fact falls to zero at low
temperature, but the assumption is good enough for this estimate). The internal
energy added to copper to raise its temperature from 0 K to 300 K is then roughly
ΔEint = μ C ΔT = (0.141 mole)(24.5 J/mole ⋅ K)(300 K) = 1000 J
Assuming that each atom contributes one free electron (and thus 1.2 × 10−15 eV) to
the metal, the contribution to the internal energy of the metal is
(0.141 mole)(6.02 ×1023 atoms/mole)(1.2 × 10−15 eV/atom) = 1.0 × 108 eV = 1.6 × 10−11 J
93
This is some 14 orders of magnitude smaller than the internal energy of the metal, so
it is clear that these mobile electrons do not make a significant contribution to the
internal energy of the metal.
37.
(a) ΔE ∼ mπ c 2 = 135 MeV
(b) Δt ∼
ΔE
=
6.58 ×10−16 eV ⋅ s
= 4.87 ×10−24 s
6
135 × 10 eV
(c) Δx = c Δt = (3.00 × 108 m/s)(4.87 ×10−24 s) = 1.46 fm
38.
(a) Δpx ∼
Δx
=
1 hc
1 1240 eV ⋅ nm
=
= 990 eV/c
c 2πΔx c 2π (0.20 nm)
(b) ( p 2 )av = ( px2 + p y2 + pz2 )av = (Δpx ) 2 + (Δp y ) 2 + (Δpz ) 2 = 3(Δpx ) 2
K av =
( p 2 )av c 2 ( p 2 )av
3(990 eV) 2
=
=
= 2.4 × 10−5 eV
2m
2mc 2
2(65 u)(931.5 × 106 eV/u)
(c) In a cube of copper 1.0 cm on edge (0.141 mole), the energy is
(0.141 mole)(6.02 ×1023 atoms/mole)(2.4 × 10−5 eV/atom) = 2.04 ×1018 eV = 0.33 J
This energy is small compared with the internal energy (roughly 1000 J), but it is not
quite as negligibly small as the energy of the electronic motion (see Problem 36).
This energy of 0.33 J is independent of temperature, so it becomes relatively more
important as the temperature of the copper is reduced (thereby decreasing the internal
energy). This is one example of the phenomenon of “zero-point motion,” a certain
minimum energy that a confined quantum system must have. There is no counterpart
to this zero-point motion in classical physics.
39.
When the beam passes through a hole of width Δx = d , there is a resulting
uncertainty in the transverse momentum of order Δpx ∼ / d and thus in the
transverse velocity of Δvx ∼ / md . From Eq. 4.16, we have
( px2 )av = (Δpx ) 2 or (vx2 )av = (Δvx ) 2 . The diameter of the beam grows larger than its
original diameter by an amount Δd = t Δvx , where t is the time the beam has been
traveling. The speed of the atoms as they leave the oven at a temperature T is found
from
94
K = 12 mv 2 = 23 kT
so
v=
3kT
m
The beam travels the distance L at a speed v in a time t = L/v, and thus
Δd = t Δ v x ∼
=
L
L
L
=
=
d md md 3kT / m d 3mkT
(2 m)(1.05 × 10−34 J ⋅ s)
(0.003 m) 3(7 u)(1.66 ×10
−27
kg/u)(1.38 ×10
−23
J/K)(1500 K)
= 3 × 10−9 m
The spreading of the beam due to the uncertainty principle is thus a negligible effect.
95
Chapter 5
This chapter presents an introduction to the methods of quantum mechanics as
exemplified by solving the Schrödinger equation. It is helpful but not necessary for
students to have some prior experience with differential equations. Because the
application of boundary conditions is especially important, the chapter begins with a
discussion of continuity of the classical wave and its first derivative, as applied to a wave
that crosses the interface between two regions in which it propagates differently.
Particularly for students with no prior training in solving differential equations (and even
for students who have had such training but for whom the boundary conditions may be
more a mathematical than a physical manifestation), it is important to introduce these
exercises. The notion of confined particles then allows a quick review of issues related to
wave packets and uncertainty from Chapter 4, before we launch into the Schrödinger
formalism. New features in this edition include an earlier introduction of the complex
nature of the wave function, which allows plots of the real part, imaginary part, and
squared magnitude for the solutions to the problem of scattering from a step or barrier
later in the chapter. As mentioned in the preface, this edition avoids plotting the wave
function or probability density on the same plot as the energy levels of bound states,
which many students found to be confusing. Also new to this edition is a section on the
finite potential energy well.
I have long been curious why so many of us say “potential” instead of “potential
energy” when we discuss the Schrödinger equation. That’s a mistake we would certainly
correct for our students if they were discussing electrostatics. Yet many quantum
mechanics textbooks say “Coulomb potential” when the presence of the e2 shows what is
meant is potential energy, and one even occasionally sees 12 kx 2 called the “harmonic
oscillator potential.” This confusion is compounded by notation, because quantum
mechanics textbooks often use V in the potential energy term in the Schrödinger equation,
but students in introductory physics learn to use U to represent potential energy and V to
represent potential. I have been careful to use the term “potential energy well” rather
than “potential well” in this edition and to use U for the potential energy.
Supplemental Materials
Chapters 6-12 of Physlet Quantum Physics offer numerous simulations that cover
material presented in this chapter. It is especially instructive to be able to illustrate the
time dependence of the real and imaginary parts of the wave function of non-stationary
states, such as in the case of scattering from a step or barrier. Static illustrations in the
text (such as Figures 5.24 and 5.25) don’t quite convey the nature of the time dependence
or the “waviness.” Physlet exercises allowing one to vary the particle energy relative to
the step or barrier height are available for classroom display or student use. A very
useful simulation for step and barrier problems is available from the University of
Colorado PhET simulations at http://phet.colorado.edu/en/simulation/quantum-tunneling.
Another excellent PhET simulation for bound states in various potential energy wells is at
http://phet.colorado.edu/en/simulation/bound-states.
96
Suggestions for Additional Reading
An introduction to the formalism of quantum physics and its historical development is
found in W. H. Cropper, The Quantum Physicists and an Introduction to Their Physics
(Oxford University Press, 1970).
Other discussions of the Schrödinger equation and examples of its use are given in
the following books, in approximately increasing order of difficulty beginning at the
level of this book:
N. Ashby and S. C. Miller, Principles of Modern Physics (Holden-Day, 1970).
P. A. Lindsay, Introduction to Quantum Mechanics for Electrical Engineers
(McGraw-Hill, 1967).
E. H. Wichmann, Quantum Physics, Volume 4 of the Berkeley Physics Course
(McGraw-Hill, 1971).
R. Eisberg and R. Resnick, Quantum Physics of Atoms, Molecules, Solids, Nuclei, and
Particles,2nd ed., (Wiley, 1985).
R. B. Leighton, Principles of Modern Physics (McGraw-Hill, 1959).
Illustrations showing the scattering of wave packets from barriers and the behavior of
wave packets inside square-well and harmonic-oscillator potential energy wells may be
found in:
S. Brandt and H. D. Dahmen, The Picture Book of Quantum Mechanics, 3rd ed.,
(Springer, 2000).
For a description of the scanning tunneling microscope, see:
G. Binnig and H. Rohrer, Scientific American 253, 50 (August 1985).
Materials for Active Engagement in the Classroom
A. Reading Quizzes
1. The probability density for a particle in the ground state of a one-dimensional infinite
potential energy well:
(1) has a single maximum at the center of the well.
(2) has a minimum at the center of the well and maxima at the sides of the well.
(3) has several maxima and minima in the well.
(4) is constant throughout the well.
2. In the one-dimensional infinite well, how does the energy spacing between the
excited states change as the energy of the states increases?
(1) The spacing is constant.
(2) The spacing decreases.
(3) The spacing increases.
(4) The spacing changes randomly.
97
3. A beam of particles is incident from the negative x axis onto a positive potential
energy step located at x = 0. The kinetic energy of the particles is less than the
potential energy of the step. Which is the best description of the behavior of the
particles?
(1) All particles are reflected precisely at x = 0.
(2) Some particles are reflected at the step and some are transmitted into the x > 0
region.
(3) Some particles are reflected and some are absorbed.
(4) All particles are reflected, but they can penetrate a short distance into the x > 0
region.
(5) All particles are absorbed at the step.
4. The probability to find a particle at any specific location in space:
(1) is directly proportional to the amplitude of the wave function.
(2) can never be zero.
(3) depends on the squared amplitude of the wave function.
(4) can sometimes be infinite.
5. The Schrödinger equation is
(a) a second-order differential equation.
(b) an equation based on conservation of energy.
(c) an equation whose solution gives the wave function that describes a particle.
How many of the above statements are true?
(1) Zero
(2) One
(3) Two
(4) All three
Answers
1. 1
2. 3
3. 4
4. 3
5. 4
B. Conceptual or Discussion Questions
1. A particle of mass m is in the ground state of an infinite potential energy well of
width L. The energy of the particle is 2.0 eV
(a) How much energy must be added to the particle to cause it to jump to the first
excited state?
(1) 2.0 eV
(2) 4.0 eV
(3) 6.0 eV
(4) 8.0 eV
(b) Suppose the particle is in the second excited state (n = 3) from which it can jump
to any lower state by emitting a photon whose energy is equal to the difference in the
energies of the two states. Considering all possible jumps that lead eventually to the
ground state, which photon energy would NOT be observed?
(1) 6.0 eV
(2) 10.0 eV (3) 12.0 eV (4) 16.0 eV
(c) What would be the ground-state energy of this particle if the width of the well
were changed to 2L?
(1) 0.5 eV
(2) 1.0 eV
(3) 2.0 eV
(4) 4.0 eV
98
2. Suppose a particle is in the ground state (n = 1) of an in finite potential energy well.
The energy is E1 = 2π 2 / 2mL2 = K + U = K because U = 0.
π2
px2
π
or
px =
2
2mL
2m
L
If px is exactly known, then Δpx = 0. For this problem, Δx = L (the particle is known
to be somewhere in that interval). We then obtain Δx Δpx = ( L)(0) = 0 , in violation
of the uncertainty principle.
WHAT'S WRONG WITH THIS CALCULATION???
2
Thus
=
3. Particles are incident from the negative x axis onto a potential energy step at x = 0.
At the step the potential energy drops from the positive value U0 for all x < 0 to the
value 0 for all x > 0. The energy of the particles is greater than U0.
(a) Which statement best describes the behavior of the particles?
(1) All particles are transmitted from x < 0 to x > 0.
(2) All particles are reflected back to x < 0 at the step.
(3) Some particles are reflected and some are transmitted.
(4) Some particles are reflected and some are absorbed.
(b) How would the wavelength of a particle change as it moves from the x < 0 region
to the x >0 region?
(1) Increases
(2) Decreases
(3) Remains the same
(c) What are the continuity conditions at x = 0?
(1) Both ψ and dψ/dx are continuous at x = 0.
(2) ψ is continuous at x = 0, but dψ/dx is not.
(3) dψ/dx is continuous at x = 0, but ψ is not.
(4) Neither ψ nor dψ/dx are continuous at x = 0.
4. The ground-state energy of a simple harmonic oscillator is 1.0 eV.
(a) If the oscillator is in its ground state, how much energy must be added for it to
reach the first excited state?
(1) 0.5 eV (2) 1.0 eV (3) 2.0 eV (4) 3.0 eV (5) 4.0 eV
(b) How much energy must be added to move the oscillator from the first excited
state to the second excited state?
(1) 0.5 eV (2) 1.0 eV (3) 2.0 eV (4) 3.0 eV (5) 4.0 eV
(c) The oscillator is in the third excited state (n = 3). It can jump to any lower state,
in the process emitting a photon whose energy is equal to the difference in energy
between the states. How many different photon energies can be emitted if these
oscillators can take any possible path from the excited state to the ground state?
(1) 1 (2) 2 (3) 3 (4) 4 (5) 5 (6) 6
Answers
1. (a) 3 (b) 3 (c) 1
3. (a) 3 (b) 2 (c) 1
2. px = ± π / L, so Δp x ∼ 2 π / L
4. (a) 3 (b) 3 (c) 3
99
[Note to instructors: Some students have trouble understanding energy diagrams, which impedes
their efforts to learn quantum mechanics. This worksheet helps them make the transition from
classical to quantum energy diagrams.]
Energy Diagrams Worksheet
1. A small puck is gliding with initial speed v across a frictionless horizontal surface. It glides up
a small hill and then moves on a horizontal surface that is a distance h above the first surface.
h
v
0
x2
x1
x3
Sketch a plot that shows, on the same diagram, the gravitational potential energy U, kinetic
energy K, and total energy E = K + U for this system.
Energy
x
0
x2
x1
x3
2. An electron is moving with initial speed v inside a thin hollow metal tube. It emerges from the
tube through a hole in a large metal plate and continues through a hole in a second plate into
another thin tube. The two plates are connected across a battery of potential difference V.
v
+
V
−
Sketch a plot that shows, on the same diagram, the electrical potential energy U, kinetic energy K,
and total energy E = K + U for this system.
Energy
x
0
x2
x1
100
x3
3. Redraw the energy diagram for these situations if the distance x2 – x1 (over which the potential
energy changes) becomes smaller.
Energy
x
0
x1
x2
x3
4. Redraw the energy diagram for the limit in which x2 – x1 becomes zero.
Energy
x
0
x3
5. Draw energy diagrams similar to those of questions 2, 3, and 4, but now assume that the initial
kinetic energy is only half of the energy needed to climb the potential energy hill between the two
plates.
Energy
x
0
x2
x1
x3
Energy
x
0
x1
x2
x3
Energy
x
0
x3
101
[Note to instructors: This worksheet should be done by students working in groups,
preferably in class.]
Schrödinger Worksheet
In this calculation you will analyze the quantum behavior of a particle moving in the
following potential energy well:
Region 1:
U(x) = ∞
x<0
Region 2:
U(x) = 0
0≤x≤L
L ≤ x ≤ 2L
(U0 > 0)
Region 3:
U(x) = U0
Region 4:
U(x) = ∞
x > 2L
Begin by sketching this potential energy well.
Part A. First we will consider states of motion of the particle of energy E < U0.
1. Write down solutions for the wave function in each of the 4 regions.
ψ1 =
ψ2 =
ψ3 =
ψ4 =
(use coefficients A and B)
(use coefficients C and D)
ψ2 should be written in terms of the parameter k = (2mE/ħ2)1/2.
ψ3 should be written in terms of the parameter k’ = [2m(U0 − E)/ħ2]1/2.
2. Apply the boundary condition on ψ at x = 0 [ψ1(x=0) = ψ2(x=0)] to eliminate one of
the coefficients A or B. (Which one will be eliminated depends on how you wrote Ρ2.)
3. Apply the boundary condition on ψ at x = 2L [ψ3(x=2L) = ψ4(x=2L)] to eliminate one
of the coefficients C or D. (Solve for C in terms of D or for D in terms of C.)
102
4. Apply the boundary condition on ψ at x = L [ψ2(x=L) = ψ3(x=L)] to express your
remaining coefficient in ψ3 (either C or D) in terms of your remaining coefficient in ψ2
(either A or B).
5. Your entire wave function in the region x = −∞ to x = +∞ should now depend on only
one coefficient (either A or B). Explain how the normalization condition allows you to
determine this remaining coefficient. Don’t carry out the calculation, just show how it
can be done.
6. There is still one boundary condition you haven’t yet applied – the condition on dψ/dx
at x = L. Explain how applying this boundary condition allows you to determine the
energy E. Don’t carry out the calculation, just show how it can be done.
Part B. Now we will repeat the calculation for states of energy E > U0.
1. Write down solutions for the wave function in each of the 4 regions.
ψ1 =
ψ2 =
ψ3 =
ψ4 =
(use coefficients A and B)
(use coefficients C and D)
ψ2 should be written in terms of the parameter k = (2mE/ħ2)1/2.
ψ3 should be written in terms of the parameter k’ = [2m(E – U0)/ħ2]1/2.
103
2. Apply the boundary condition on ψ at x = 0 to eliminate one of the coefficients A or B.
(Which one will be eliminated depends on how you wrote Ρ2.)
3. Apply the boundary condition on ψ at x = 2L to eliminate one of the coefficients C or
D.
4. Apply the boundary condition on ψ at x = L to express your remaining coefficient in
ψ3 (either C or D) in terms of your remaining coefficient in ψ2 (either A or B).
5. Your entire wave function in the region x = −∞ to x = +∞ should now depend on only
one coefficient (either A or B). Explain how the normalization condition allows you to
determine this remaining coefficient. Don’t carry out the calculation, just show how it
can be done.
6. There is still one boundary condition you haven’t yet applied – the condition on dψ/dx
at x = L. Explain how applying this boundary condition allows you to determine the
energy E. Don’t carry out the calculation, just show how it can be done.
104
Part C. Now consider the probability to locate the particle using the wave functions of
Part B.
1. What is the probability of finding the particle in each region (1, 2, 3, and 4)? Don’t
evaluate any mathematical expressions, just write them down as completely as you can.
2. How does the probability to find the particle in region 2 compare with the probability
to find the particle in region 3?
___ probability (2) > probability (3)
___ probability (2) = probability (3)
___ probability (2) < probability (3)
Use the classical behavior of the particle to justify your answer. What does this imply
about the wave function?
Part D. Without solving the equations for the various coefficients that you found in
Parts A and B, sketch ψ(x) in the entire region x = −∞ to x = +∞ in the following
cases.
1.
2.
3.
4.
5.
The lowest energy state in Part A.
The next higher state above the lowest one in Part A (the first excited state in Part A).
The second excited state in Part A.
The lowest energy state in Part B.
The next higher state above the lowest one in Part B.
Your sketches need not be exact representations of the wave functions, but each sketch
should clearly illustrate:
(a) the continuity conditions at each boundary;
(b) relative wavelengths associated with the particle motion;
(c) relative amplitudes of the wave function.
105
Sample Exam Questions
A. Multiple Choice
1. A particle in the first excited state of a one-dimensional infinite potential energy well
(with U = 0 inside the well) has an energy of 6.0 eV. What is the energy of this
particle in the ground state?
(a) 1.0 eV
(b) 1.5 eV
(c) 2.0 eV
(d) 3.0 eV
2. The ground state of a particle in simple harmonic motion has energy 0.5 eV and the
first excited state has energy 1.5 eV. What is the energy of the next excited state?
(a) 2.5 eV
(b) 3.5 eV
(c) 3.0 eV
(d) 2.0 eV
3. The ground-state energy of a particle in an infinite one-dimensional potential energy
well is 6.0 eV. What is the energy of the first excited state?
(a) 12.0 eV
(b) 18.0 eV
(c) 7.5 eV
(d) 24.0 eV
4. In a certain infinite potential energy well, the particle has a ground-state energy of 2.0
eV. Which of the following is NOT a possible value for the energy of one of the
excited states of this particle in the well?
(a) 36 eV
(b) 50 eV
(c) 18 eV
(d) 8 eV
5. A particle is moving in an infinite potential energy well in one dimension. In the
ground state, the energy of the particle is 5.0 eV. Which one of the following is a
possible energy for an excited state?
(a) 25.0 eV
(b) 40.0 eV
(c) 80.0 eV
(d) 100.0 eV
6. An electron in the ground state of an infinite potential energy well has an energy of
8.0 eV. How much additional energy must be supplied for the electron to jump from
the ground state to the first excited state?
(a) 8.0 eV
(b) 16.0 eV
(c) 24.0 eV
(d) 32.0 eV
7. Consider the following two possible solutions to the Schrödinger equation in the
(ii) ψ (x) = Ae+kx
entire interval from x = 0 to x = +∞: (i) ψ(x) = Ae-kx/x
(A and k are real positive constants.) Which are allowable wave functions?
(a) Only i (b) Only ii (c) Both i and ii (d) Neither i nor ii
8. A beam of particles is incident from the negative x direction on a potential energy
step at x = 0. When x < 0, the potential energy of the particles is zero, and for x > 0
the potential energy has the constant positive value U0. In the region x < 0, the
particles have a kinetic energy K that is smaller than U0. What is the form of the
wave function in the region x > 0?
(a) Ae kx + Be − kx (b) Aeikx + Be −ikx (c) Ae kx (d) Ae − kx (e) A cos kx + B sin kx
Answers
1. b
2. a
3. d
4. a
5. c
106
6. c
7. d
8. d
B. Conceptual
1. A beam of particles is incident from the negative x axis, where U(x) = 0, on a barrier
of constant height U0 which extends from x = 0 to x = L. Beyond the barrier (where x
> L), the potential energy is again equal to zero. The particles have energy E which is
less than the height of the barrier. Let B represent the amplitude of the wave function
of particles that appear beyond the barrier (where x > L). Keeping the height of the
barrier constant, we suddenly increase the thickness of the barrier from L to 2L (that
is, the barrier now extends from x = 0 to x = 2L). Is the amplitude of the wave
function for particles beyond the new barrier (where x > 2L) greater than B, equal to
B, or less than B? EXPLAIN YOUR ANSWER.
2. The wave function shown is associated with the motion of an electron in one of the
four energy levels of a finite potential energy well of width L and depth U. Identify
the number of the level with which this wave function is associated, and describe
where in this region the electron would most likely be found. EXPLAIN YOUR
ANSWERS.
3. A beam of particles of energy 3 eV is moving in the region x < 0 toward the origin.
The potential energy is zero in this region. Starting at x = 0 and continuing until x =
L, the potential energy is 10 eV, and beyond x = L the potential energy is once again
zero. Is the wavelength in the region x > L greater than, smaller than, or equal to the
wavelength in the region x < 0, and is the maximum probability to find particles in the
region x > L greater than, smaller than, or equal to the maximum probability to find
particles in the region x < 0? EXPLAIN YOUR ANSWERS. (Note that this problem
requires 2 answers.)
4. A particle is trapped between x = 0 and x = 0.120 nm in a potential energy well of
infinite height. The particle may be in either the first excited state or the second
excited state. For which of these two states is there a greater probability of finding
the particle in the region between x = 0.039 nm and x = 0.041 nm? EXPLAIN YOUR
ANSWER.
107
5. A particle moves in a one-dimensional potential energy
U(x) specified by:
U(x) = ∞
x<0
(region 1)
U(x) = -30 eV
0<x<L
(region 2)
U(x) = -15 eV
L < x < 3L
(region 3)
U(x) = 0
3L < x < 4L (region 4)
U(x) = ∞
x > 4L
(region 5)
The energy of the particle is -5 eV.
If we measure the position of the particle at a random
time, in which region (1,2,3,4, or 5) are we most likely
to find the particle? EXPLAIN YOUR ANSWER.
E
1
x=0
x=L
x=3L
6. An electron is trapped in an infinite potential energy well with walls at x = 0 and x =
0.100 nm. Consider the probability to find the electron in a narrow region in the
center of the well between x = 0.049 nm and x = 0.051 nm. Is the probability to find
the electron in this region when the electron is in its ground state greater than, less
than, or equal to the probability to find the electron in this same region when it is in
the first excited state? EXPLAIN YOUR ANSWER.
7. A particle is trapped in the region between x = 0 and x = L by two rigid walls. The
particle is in its ground state. Is the probability to locate the particle in a small
interval of width dx near x = 0.5L greater than, less than, or equal to the probability
to locate it in a small interval of width dx near x = 0.1L? EXPLAIN YOUR
ANSWER.
8. An electron is trapped in a one-dimensional region of space between two rigid walls
at x = 0 and x = L. In the first excited state, where would you expect that the electron
is most likely found? EXPLAIN YOUR ANSWER.
Answers
1. less than
2. n = 2, near x = L/4 and 3L/4
3. equal to, smaller than
4. first excited state
5. 3
6. greater than
7. greater than
8. x = L/4 and 3L/4
C. Problems
1. A particle of mass m is moving in a one-dimensional region of space where there is a
Coulomb-like potential energy U(x) = -C/x, where C is a positive constant.
(a) Show that ψ(x) = Axe-ax (with a = mC / 2 ) is a solution to the one-dimensional
Schrödinger equation, and find the corresponding energy E.
(b) Would you expect this wave function to be valid for the entire region -∞ ≤ x ≤ +∞?
Explain.
(c) Set up the equation that can be solved to find the constant A. Do not try to solve
the equation, just set it up.
108
5
4
3
2
x=4L
2.
A beam of electrons with energy E is incident from the negative x direction on a
potential energy step located at x = 0. The potential energy is zero for x < 0 and has
the constant positive value U0 for x > 0. Assume E is about U0/3.
(a) What are the wave functions that describe the particle in the region x < 0 and in
the region x > 0? You should use a total of 3 undetermined coefficients in your two
wave functions. Define all parameters that appear in your wave functions.
(b) Show how to use the continuity conditions at x = 0 to find relationships among the
coefficients.
(c) Sketch the wave function.
(d) Describe as carefully as you can how the wave functions in the regions x < 0 and
x > 0 would change if E were doubled (but still less than U0).
3. (a) A neutron (mc2 = 939.6 MeV) is confined in a nucleus of diameter 11 fm. Inside
the nucleus, the neutron moves freely (no forces act on it), but at the edges of the
nucleus a very strong force (which we can take to be infinitely strong) prevents the
neutron from leaving the nucleus. Treating this as a one-dimensional problem, find
the energy difference between the ground state and the first excited state of the
neutron.
(b) In the ground state, what is the probability to find the neutron in a narrow region
of width 0.10 fm located at the center of the nucleus?
4. Consider the following potential energy:
x<0
region 1: U(x) = U0
region 2: U(x) = 0
0<x<L
x>L
region 3: U(x) = U0
where U0 > 0. We want to consider a particle with energy E
such that 0 < E < U0.
E
There are two possible forms for the wave function that might be used to represent
the particle:
ψ ( x) = Ai sin ki x + Bi cos ki x
ψ ( x) = Ai ek x + Bi e − k x
i
i
where i = 1,2,3 indicates the three regions.
(a) Write down wave functions that describe the behavior of the particle in region 1,
region 2, and region 3. Use appropriate subscripts to label all parameters. If any of
the coefficients Ai or Bi are zero, identify those coefficients and explain why they are
equal to zero.
(b) Sketch the probability distributions you would expect for the ground state and the
first excited state.
In region 2, how is the probability distribution of the ground state different from the
probability distribution of the first excited state?
In regions 1 and 3, how is the probability distribution of the ground state different
from the probability distribution of the first excited state?
(c) Use the continuity conditions at x = 0 to show how the coefficients of the wave
function in region 2 are related to the coefficients of the wave function in region 1.
109
U0
5. Consider the following one-dimensional potential energy barrier:
U(x) = 0
U(x) = U0
x<0
x>0
(U0 is a positive constant)
Particles of mass m and energy E are incident on this barrier from the negative x axis.
(a) Suppose the particles have energy greater than U0. Write down the wave function
for the regions x < 0 and x > 0. Explain briefly how to determine all constants that
appear in your solutions. Sketch a possible form for the wave function, paying
careful attention to how the wavelength and amplitude change at x = 0.
(b) Now suppose the particles have energy less than U0. Write down the wave
function for the regions x < 0 and x > 0. Explain briefly how to determine all
constants that appear in your solutions. Sketch a possible form for the wave function.
6. A beam of particles of mass m is traveling from x = -∞ toward x = 0. In that region
the potential energy is zero. In the region x > 0 there is a constant negative potential
energy U0.
(a) By direct substitution into the Schrodinger equation, show that the particles in the
region x < 0 can be represented by the wave function ψ 1 ( x) = Aeik1x + Be − ik1x . In the
process of solving this equation, find the energy of the particles as a function of k1.
(b) Describe the physical meaning of the constants A and B.
(c) Write down the wave function ψ2 that would describe the particles in the region
x > 0. Define all constants that appear in your wave function. Show how you would
apply the continuity conditions at x = 0 to determine these constants. It is not
necessary to find the algebraic solutions to the continuity equations, just set them up
in terms of the constants that need to be determined.
7. A beam of electrons is traveling along the x axis starting at x = −∞ in a region in
which the potential energy can be taken to be zero. The electrons have a kinetic
energy of E = 4.0 eV. At x = 0, the potential energy suddenly rises to U0 = 10.0 eV
and stays at that value to x = +∞.
(a) Write down the wave function for this situation in the region x < 0. Explain the
meaning of all terms and constants in your equation.
(b) Write down the wave function for this situation in the region x > 0. Explain the
meaning of all terms and constants in your equation.
(c) Show how to apply the continuity conditions at x = 0.
(d) Sketch the probability density as a function of x showing portions of both regions.
Be sure your sketch clearly indicates the zero of the probability density axis.
(e) Sketch the probability density for the case in which the original kinetic energy is
8.0 eV, with all other parts of the problem remaining the same. Describe 2 ways in
which this probability density differs from part (d).
8. An electron is trapped in a region between two perfectly rigid walls (which can be
regarded as infinitely high energy barriers). In the region between the walls the
potential energy of the electron is zero. The (normalized) wave function of the
110
electron in the region between the walls is ψ(x) = a sin bx where a = 0.50 nm-1/2 and
b = 1.18 nm-1.
(a) By substituting into the Schrödinger equation, find the energy of the electron in
this state of motion.
(b) What is the probability to find the electron between x = 0.99 nm and x = 1.01 nm?
9. A particle of mass m is trapped in a one-dimensional finite potential energy well. The
potential energy is zero in the region between x = 0 and x = L, and it is equal to the
constant positive value U0 in the regions x < 0 and x > L. We want to examine
bound-state solutions with E < U0.
(a) Write down the wave functions that describe the particle in the regions x < 0,
0 < x < L, and x > L. It is not necessary to apply the boundary conditions, but be sure
all your wave functions remain finite in the regions in which they are defined. All
unknown parameters that appear in your equations must be defined.
(b) Sketch the probability densities for the ground state and the first excited state.
How do the ground-state and first excited-state wave functions differ from each other
inside the well (0 < x < L)? How do they differ from each other outside the well
(x < 0 or x > L)?.
10. In some situations, the behavior of an electron can be approximated as if the electron
were bound to an equilibrium position by a spring force (F = -kx, U = kx2/2).
Suppose such an electron were in the first excited state, with a wave function
2
ψ ( x) = Axe− ax , where A is a constant and a = km / 2 . In this equation, x
represents the distance of the electron from its equilibrium position.
(a) Find the energy of the electron in terms of the spring constant k and its mass m.
(b) If the electron behaved like a classical oscillating particle, the largest value of x
would be xm. Find xm in terms of k and m.
(c) Sketch a drawing that shows the probability to find the electron as a function of x
in the range −∞ to +∞. Indicate where xm would appear on your sketch.
(d) Explain the meaning the probability when x > xm.
11. (a) For a particle of mass m moving in the potential energy U(x) = -A/x, one solution
to the Schrödinger equation for the region 0 < x < ∞ is ψ(x) = Bxe-bx, where
b = 4π2Am/h2. Show that this function is a solution, and find the corresponding
energy E.
(b) Sketch the probability density for this wave function. Where would you expect
the electron to be most likely to be found?
12. A particle moves in the following one-dimensional potential energy well:
U= ∞
x<0
U=0
0<x<L
L < x < 2L
U = U0
U= ∞
x > 2L
where U0 is a positive constant.
(a) Assume E > U0. Without doing the complete mathematical solution, describe the
wave function of the particle as completely as you can. Specify the behavior of the
111
wave function in all 4 regions of the x axis. Sketch wave functions that might
represent the ground state and the first excited state. Pay special attention to the wave
behavior of the particle. Describe clearly what happens to the wave function at each
of the boundaries between the regions.
(b) Repeat part (a), but now assume U0 > E > 0.
13. A beam of particles of mass m and energy E is traveling from x = -∞ in a region in
which the potential energy is zero. Between x = 0 and x = L the potential energy has
the negative value -U0 , and beyond x = L the potential energy is again equal to 0.
(a) Find the wavelengths of the particles in the three regions x < 0, 0 < x < L, and x > L.
(b) Using complex exponentials in the form e±ikx, write down the wave functions that
describe the particles in the three regions. Explain the meanings of any coefficients
you use in your equations.
(c) Sketch the probability density, showing the regions from x < 0 to x > L.
Answers
2. (a) ψ 1 = A sin k1 x + B cos k1 x with k1 = 2mE /
ψ 2 = Ce − k x with k2 = 2m(U 0 − E ) /
2
2
2
3. (a) 5.07 MeV (b) 0.018
4. (a) ψ 1 = A1e k1x , ψ 2 = A2 sin k2 x + B2 cos k2 x, ψ 3 = B3e − k3 x
5. (a) ψ 1 = A sin k1 x + B cos k1 x with k1 = 2mE /
2
ψ 2 = C sin k2 x + D cos k2 x with k2 = 2m( E − U 0 ) /
(b) ψ 2 = De − k2 x with k2 = 2m(U 0 − E ) /
6. (a) E =
2
2
2
k12 / 2m (c) ψ 2 = Ceik2 x with k2 = 2m( E + U 0 ) /
7. (a) ψ 1 = A sin k1 x + B cos k1 x with k1 = 2mE /
ψ 2 = Ce − k x with k2 = 2m(U 0 − E ) /
2
2
2
2
8. (a) 0.053 eV (b) 0.0043
9. (a) ψ 1 = A1e k1x , ψ 2 = A2 sin k2 x + B2 cos k2 x, ψ 3 = B3e − k3 x
10. (a)
3
2
k / m (b) ( mk ) −1/ 4 3
12. (a) ψ 1 = 0, ψ 2 = A sin kx + B cos kx with k = 2mE /
2
ψ 3 = A′ sin k ′x + B′ cos k ′x with k ′ = 2m( E − U 0 ) /
(b) ψ 3 = A′e k ′x + B′e − k ′x with k ′ = 2m(U 0 − E ) /
2
,ψ 4 = 0
2
13. (a) h / 2mE , h / 2m( E + U 0 ), h / 2mE
(b) ψ 1 = Aeikx + Be − ikx with k = 2mE /
2
ψ 2 = Ceik ′x + De − ik ′x with k ′ = 2m( E + U 0 ) /
112
2
, ψ 3 = Feikx
Problem Solutions
1.
(a) In air, the initial velocity is zero, so v1 (t ) = − gt and y1 (t ) = H − 12 gt 2 .
(b) The time T at which the ball hits the water is determined by setting y1 to zero:
y1 (T ) = H − 12 gT 2 = 0
so
T = 2H / g
At this time, we set y1 (T ) = y2 (T ) and v1 (T ) = v2 (T ) :
1 ⎛ 2H
H − g ⎜⎜
2 ⎝ g
2
⎞ 1 ⎛ B − mg ⎞ ⎛ 2 H
⎟⎟ = ⎜
⎟⎜
2 ⎝ m ⎠ ⎜⎝ g
⎠
2
⎞
2H
2 H ⎛ B − mg ⎞ 2 H
+ c and − g
=⎜
+b
⎟⎟ + b
⎟
g
g
⎝ m ⎠ g
⎠
The second equation can be solved directly to give
b=−
B 2H
m g
and inserting this value into the first equation gives
⎛ B
⎞
c=H⎜
+ 1⎟
⎝ mg ⎠
2.
Let y1 ( x) = A cos(2π x / λ + π / 3) for x < 0. For x > 0, the wave is
y2 ( x) = A2 cos(2π x / λ2 + φ )
with λ2 = λ / 2 . The continuity conditions on y and dy/dx at x = 0 give
y1 = y2
or
A cos(π / 3) = A2 cos φ
dy1 dy2
=
dx
dx
or
−
2π A
λ
sin(π / 3) = −
4π A2
λ
sin φ
Dividing the second of these equations by the first, we obtain
tan(π / 3) = 2 tan φ
or
φ = tan −1 [ 12 tan(π / 3)] = 40.9°
and solving the first equation for A2,
113
A2 = A
E1 =
3.
cos π / 3
= 0.661A
cos φ
h2
= 4.4 eV
8mL2
With L′ = 2 L ,
E1′ =
1 h2
1
h2
h2
=
=
= (4.4 eV) = 1.1 eV
2
2
2
8mL′ 8m(2 L)
4 8mL 4
4. With λn = 2 L / n ,
λ1 =
2(0.120 nm)
= 0.240 nm
1
λ2 =
0.240 nm
= 0.120 nm
2
λ3 =
0.240 nm
= 0.080 nm
3
5. The smallest energy is (using Equation 5.3)
E1 =
h2
(hc) 2
(1240 eV ⋅ nm) 2
=
=
= 150 eV
8mL2 8(mc 2 ) L2 8(511, 000 eV)(0.050 nm) 2
Then E2 = 22 E1 = 600 eV and E3 = 32 E1 = 1350 eV .
6. With L = 1.0 × 10−14 m = 10 fm,
E1 =
h2
(hc) 2
(1240 MeV ⋅ fm) 2
=
=
= 2.0 MeV
8mL2 8(mc 2 ) L2 8(940 MeV)(10 fm) 2
7. (a) At x = a, ψ 1 = ψ 2 and dψ 1 / dx = dψ 2 / dx :
114
0 = (a − d ) 2 − c
− 2ab = 2(a − d )
and
From the second equation, d = a (b + 1) . Inserting this into the first equation, we find
c = a 2b 2 .
(b) With ψ 2 = ψ 3 at x = w, we get ( w − d ) 2 − c = 0 , or
w = d + c = a (b + 1) + a 2b 2 = a(2b + 1)
The slope is discontinuous at w suggesting an infinite discontinuity in the potential
energy at that location.
8. (a) The regions with x < a and x > a do not contribute to the normalization. The
normalization integral is
∫ ψ ( x)
2
+a
dx = ∫ b (a − x ) dx = b
2
2
2 2
−a
2
∫
+a
−a
+a/ 2
⎛
x3 x5 ⎞
(a − 2a x + x ) dx = b ⎜ a 4 x − 2a 2 + ⎟
3 5 ⎠ −a / 2
⎝
4
2
2
4
2
Evaluating the integral and setting it equal to 1, we find
⎛
4a 5 2a 5 ⎞
b 2 ⎜ 2a 5 −
+
⎟ =1
3
5 ⎠
⎝
or
b=
15
16a 5
(b) P ( x) dx =| ψ ( x) |2 dx = b 2 (a 2 − x 2 ) 2 dx , and with x = +a/2 and dx = 0.010a we obtain
2
⎞
15 ⎛ a 2
P( x) dx =
− a 2 ⎟ (0.010a) = 0.0053
5 ⎜
16a ⎝ 4
⎠
a
3
15 ⎛ 4
x5 ⎞
2 x
+ ⎟
(c) P (a / 2 : a) = ∫ ψ ( x) dx = ∫ b (a − x ) dx =
⎜ a x − 2a
a/2
a/2
16a 5 ⎝
3 5 ⎠ a/2
a
=
15
16a 5
2
a
2
2
2 2
⎡ 4⎛
a ⎞ 2a 2 ⎛ 3 a 3 ⎞ 1 ⎛ 5 a 5 ⎞ ⎤
a
a
−
⎢ ⎜
⎜ a − ⎟ + ⎜ a − ⎟ ⎥ = 0.104
⎟−
2⎠ 3 ⎝
8 ⎠ 5⎝
32 ⎠ ⎦
⎣ ⎝
9. With ψ ( x) = Cxe −bx , we have dψ / dx = Ce −bx − bCxe −bx and
d 2ψ
= −2bCe −bx + b 2Cxe − bx
dx 2
We now substituteψ ( x) and d 2ψ / dx 2 into the Schrödinger equation:
115
−
2
2m
(−2bCe − bx + b 2Cxe − bx ) + U ( x)Cxe − bx = ECxe− bx
Canceling the common factor of Ce − bx and solving for E,
E=
2
2 2
b
b
−
+ U ( x)
mx 2m
The energy E will be a constant only if the two terms that depend on x cancel each other:
2
b
+ U ( x) = 0
mx
U ( x) = −
or
2
b
mx
The cancellation of the two terms depending on x leaves only the remaining term for the
energy:
2 2
b
E=−
2m
10.
(a) The regions with x < −L/2 and x > +L/2 do not contribute to the normalization
integral. The remaining integral is:
∫ | ψ ( x) |
2
dx = ∫
0
−L/2
C 2 (2 x / L + 1) 2 dx + ∫
L/2
0
= C 2 (4 x3 / 3L2 + 2 x 2 / L + x)
C 2 (−2 x / L + 1) 2 dx
0
−L/2
+ C 2 (4 x 3 / 3L2 − 2 x 2 / L + x)
L/2
0
= C2L / 3
Setting the integral equal to 1 gives C = 3 / L .
(b) P ( x) dx =| ψ ( x) |2 dx = C 2 (4 x 2 / L2 − 4 x / L + 1) dx and with x = 0.250L and dx =
0.010L,
3 ⎛ 4 L2 4 L ⎞
P ( x) dx = ⎜ 2
−
+ 1⎟ (0.010 L) = 0.0075
L ⎝ L 16 L 4 ⎠
(c)
L/2
P (0 : L / 4) = ∫
L/4
0
| ψ ( x) | dx = C
2
2
∫
L/4
0
⎞
3 ⎛ 4 x3 4 x 2
1
⎛ 4 2 4
⎞
x
x
1
dx
−
+
=
−
+ x⎟ =
⎜ 2
⎜ 2
⎟
L
L⎝L 3 L 2
2
⎝L
⎠
⎠0
2
L/2 ⎛ 4x
3 0 ⎛ 4 x2 4 x ⎞
4x ⎞
(d) x = ∫ | ψ ( x) | x dx = ∫ ⎜ 2 +
+ 1⎟ x dx + ∫ ⎜ 2 −
+ 1⎟ x dx
L
−
/
2
0
L
L
L
⎝ L
⎠
⎝ L
⎠
2
116
0
L/2
3 ⎛ x 4 4 x3 x 2 ⎞
3 ⎛ x 4 4 x3 x 2 ⎞
= ⎜ 2+
+ ⎟
+ ⎜ 2−
+ ⎟ =0
L⎝ L
3L 2 ⎠ − L / 2 L ⎝ L
3L 2 ⎠ 0
It is apparent from the shape of the wave function that the equal probability densities for
positive and negative x cancel to give an average of zero.
x 2 = ∫ | ψ ( x) |2 x 2 dx =
2
L/2 ⎛ 4x
3 0 ⎛ 4x2 4x ⎞ 2
4x ⎞ 2
x
dx
1
+
+
+
−
+ 1⎟ x dx
⎜
⎟
⎜
2
2
∫
∫
0
L −L/ 2 ⎝ L
L
L
⎠
⎝ L
⎠
0
L/2
L2
3 ⎛ 4 x5 x 4 x3 ⎞
3 ⎛ 4 x5 x 4 x3 ⎞
= ⎜ 2+ + ⎟
+ ⎜ 2− + ⎟ =
L ⎝ 5L
L 3 ⎠ − L / 2 L ⎝ 5L
L 3 ⎠0
40
The rms value is then xrms =
11.
x 2 = L2 / 40 = 0.158 L .
With E1 = 1.26 eV and En = n 2 E1 we have
ΔE3 = E3 − E1 = 9 E1 − E1 = 8E1 = 8(1.26 eV) = 10.1 eV
ΔE4 = E4 − E1 = 16 E1 − E1 = 15E1 = 15(1.26 eV) = 18.9 eV
12. (a)
E1 =
h2
(hc) 2
(1240 eV ⋅ nm) 2
=
=
= 5.97 eV
8mL2 8(mc 2 ) L2 8(511, 000 eV)(0.251 nm) 2
4 → 1:
(b)
13.
ΔE = E4 − E1 = 16 E1 − E1 = 15 E1 = 15(5.97 eV) = 89.6 eV
4 → 3:
ΔE = E4 − E3 = 16 E1 − 9 E1 = 7 E1 = 7(5.97 eV) = 41.8 eV
4 → 2:
ΔE = E4 − E2 = 16 E1 − 4 E1 = 12 E1 = 12(5.97 eV) = 71.6 eV
3→ 2:
ΔE = E3 − E2 = 9 E1 − 4 E1 = 5 E1 = 5(5.97 eV) = 29.9 eV
3 → 1:
ΔE = E3 − E1 = 9 E1 − E1 = 8 E1 = 8(5.97 eV) = 47.8 eV
2 → 1:
ΔE = E2 − E1 = 4 E1 − E1 = 3E1 = 3(5.97 eV) = 17.9 eV
nπ x
L nπ 2
sin u du with u = nπ x / L . The integral is a standard form
dx = A2
0
L
nπ ∫0
that can be found in integral tables:
∫
L
A2 sin 2
117
L
nπ
A2
∫
nπ
0
L
nπ
sin 2 u du = A2
( 12 u − 14 sin 2u )
nπ
= A2
0
L
2
Setting the integral equal to 1 for normalization gives A2 L / 2 = 1 or A = 2 / L .
14. (a) P (0 : L / 3) = ∫
L/3
0
| ψ 1 ( x) |2 dx = ∫
L/3
0
2 2 πx
2 π /3
sin
dx = ∫ sin 2 u du
π 0
L
L
π /3
2 ⎛ u sin 2u ⎞
= ⎜ −
⎟ = 0.1955
π ⎝4
4 ⎠0
(b) P ( L / 3 : 2 L / 3) = ∫
2L/3
L/3
|ψ 1 ( x) |2 dx = ∫
2L/3
L/3
2 2 πx
2 2π / 3
sin
dx = ∫ sin 2 u du
π π /3
L
L
2π / 3
2 ⎛ u sin 2u ⎞
= ⎜ −
= 0.6090
⎟
π ⎝4
4 ⎠ π /3
(c) P (2 L / 3 : L) = ∫
L
2L /3
2 2 πx
2 π
sin
dx = ∫ sin 2 u du
2L /3 L
π 2π / 3
L
| ψ 1 ( x) |2 dx = ∫
L
π
2 ⎛ u sin 2u ⎞
= ⎜ −
= 0.1955
⎟
π ⎝4
4 ⎠ 2π / 3
15. (a) P ( x)dx =| ψ 3 ( x) |2 dx =
2 2 3π x
2
3π (0.188 nm)
sin
sin 2
0.001 nm = 2.63 ×10−5
dx =
0.189 nm
0.189 nm
L
L
(b) P( x)dx =
2 2 3π x
2
3π (0.031 nm)
sin
dx =
sin 2
0.001 nm = 0.0106
L
L
0.189 nm
0.189 nm
(c) P( x) dx =
2 2 3π x
2
3π (0.079 nm)
dx =
sin
sin 2
0.001 nm = 5.42 × 10−3
L
L
0.189 nm
0.189 nm
A classical particle has a uniform probability to be found anywhere within the region, so
P ( x) dx = (0.001 nm) /(0.189 nm) = 5.29 × 10−3 .
16. With E = E0 (nx2 + ny2 ) the levels above 50E0 are as follows:
nx
ny
E
nx
118
ny
E
6
4
7
2
7
3
4
6
2
7
3
7
52E0
52E0
53E0
53E0
58E0
58E0
6
5
7
4
8
1
5
6
4
7
1
8
61E0
61E0
65E0
65E0
65E0
65E0
ny
3
5
4
1
6
2
E
6.25E0
7.25E0
8.00E0
9.25E0
10.00E0
10.00E0
The level at E = 65E0 is 4-fold degenerate.
17. With E = E0 (nx2 + n y2 / 4) the levels are as follows:
nx
1
1
2
1
2
1
ny
1
2
1
3
2
4
E
1.25E0
2.00E0
2.25E0
3.25E0
5.00E0
5.00E0
nx
2
1
2
3
1
3
The levels at E = 5.00E0 and E = 10.00E0 are both 2-fold degenerate.
18. Using Equations 5.39 and 5.40, we have
∂ψ
df
= g( y)
= g ( y )( k x A cos k x x − k x B sin k x x )
∂x
dx
∂ 2ψ
d2 f
(
)
=
g
y
= g ( y )( − k x2 A sin k x x − k x2 B cos k x x ) = − k x2 g ( y ) f ( x )
∂x 2
dx 2
∂ψ
dg
= f ( x)
= f ( x )( k y C cos k y y − k y D sin k y y )
∂y
dy
∂ 2ψ
d 2g
= f ( x ) 2 = f ( x )( − k y2C sin k y y − k y2 D cos k y y ) = − k y2 f ( x ) g ( y )
2
dy
∂y
With U ( x, y ) = 0 inside the well, Equation 5.37 gives
−
and so E =
19.
2
⎡⎣ − k x2 f ( x ) g ( y ) − k y2 f ( x ) g ( y ) ⎤⎦ = Ef ( x ) g ( y )
2m
2
( k x2 + k y2 ) .
2m
Let E0 = 2π 2 / 2mL2 . The energy states are then
119
degeneracy
nx ny nz
1 1 1
E
3E0
1
1
2
6E0
6E0
6E0
3
3
1
2
1
2
1
1
1
2
2
2
1
2
2
2
1
9E0
9E0
9E0
1
1
3
1
3
1
3
1
1
11E0
11E0
11E0
1
3
degeneracy
E
18E0
3
18E0
18E0
19E0
19E0
19E0
21E0
21E0
21E0
21E0
21E0
21E0
21E0
19E0
18E0
17E0
6
3
3
3
(1,2,4), (1,4,2), (2,1,4), (2,4,1), (4,1,2), (4,2,1)
(1,3,3), (3,1,3), (3,3,1)
(1,1,4), (1,4,1), (4,1,1)
(2,2,3), (2,3,2), (3,2,2)
14E0
12E0
11E0
9E0
6
1
3
3
(1,2,3), (1,3,2), (2,1,3), (2,3,1), (3,1,2), (3,2,1)
(2,2,2)
(1,1,3), (1,3,1), (3,1,1)
(1,2,2), (2,1,2), (2,2,1)
6E0
3
(1,1,2), (1,2,1), (2,1,1)
3E0
1
(1,1,1)
Degeneracy
Energy
20.
degeneracy nx ny nz
nx ny nz
E
2 2 2 12E0
1
1 1 4
1 4 1
1 2 3 14E0
4 1 1
1 3 2 14E0
6
2 1 3 14E0
1 3 3
2 3 1 14E0
3 1 3
3 1 2 14E0
3 3 1
3 2 1 14E0
1 2 4
2 2 3 17E0
1 4 2
3
2 3 2 17E0
2 1 4
3 2 2 17E0
2 4 1
4 1 2
4 2 1
(nx, ny, nz)
2
With ψ ( x ) = Ae − ax , the normalization integral is
∫
+∞
−∞
|ψ ( x ) |2 dx = A2 ∫
+∞
−∞
∞
e −2 ax dx = 2 A2 ∫ e −2 ax dx = A2
2
2
0
π
2a
The integral is a standard form that can be found in integral tables. Setting this result
equal to 1 for the normalization condition and using Equation 5.49 for a, we
obtain A2 π / 2a = 1 or
1/ 4
⎛ 2a ⎞
A=⎜ ⎟
⎝π ⎠
1/ 4
⎛ km ⎞
=⎜
⎟
⎝ π ⎠
120
1/ 4
⎛ mω0 ⎞
=⎜
⎟
⎝ π ⎠
3
6
where the final result uses ω02 = k / m .
21.
(a)
E0 =
1
2
ω0 = 12 kx02
so
x0 =
ω0 / k
(b)
E1 =
3
2
ω0 = 12 kx02
so
x0 = 3 ω0 / k
E2 =
5
2
ω0 = 12 kx02
so
x0 = 5 ω0 / k
∞
∞
−∞
−∞
xav = ∫ |ψ ( x ) |2 x dx = A2 ∫ e −2 ax x dx = 0
22.
2
because the integrand is an odd function of x (the integral from −∞ to 0 exactly cancels
the integral from 0 to +∞).
∞
∞
−∞
−∞
∞
( x 2 )av = ∫ |ψ ( x ) |2 x 2 dx = A2 ∫ e −2 ax x 2 dx =2 A2 ∫ e −2 ax x 2dx =
2
2
0
2 A2
8a
3
∫
∞
0
2
e − u u 2 du
with the substitution u = x 2a . The integral is a standard form found in tables and is
equal to π / 4 . Substituting A = (ω0m / π )1/ 4 and a = km / 2 = ω0m / 2 , we find
1/ 2
⎛ω m⎞
( x )av = 2 ⎜ 0 ⎟
⎝ π ⎠
2
1 ⎛ 2 ⎞
⎜
⎟
2 2 ⎝ ω0m ⎠
Δx = ( x 2 )av − ( xav ) 2 =
23.
π
4
=
2ω0m
/ 2mω0
(a) Because the oscillating particle moves with equal probability in the positive and
negative x directions, pav = 0 .
1
1
1
1
= ω02m 2 =
ω0
U av = k ( x 2 )av = k
(b)
2
2 2ω0m 2
2ω0 m 4
K av = E − U av =
1
2
ω0 − 14 ω0 =
1
4
ω0
ωm
⎛1
⎞
( p 2 )av = 2mK av = 2m ⎜ ω0 ⎟ = 0
2
⎝4
⎠
(c)
24.
3/ 2
Δp = ( p 2 )av − ( pav ) 2 =
E0 = 1.24 eV =
1
2
ω0
so
ω0m / 2
ω0 = 2.48 eV
121
ΔE = E2 − E0 =
ΔE = E4 − E0 =
To n = 2 state:
To n = 4 state:
25.
5
2
9
2
ω0 − 12 ω0 = 2 ω0 = 2(2.48 eV) = 4.96 eV
ω0 − 12 ω0 = 4 ω0 = 4(2.48 eV) = 9.92 eV
2
P( x ) dx =|ψ ( x ) |2 dx = A2 e −2 ax dx so at x = 0 P(0)dx = A2dx
At the classical turning points x = ± x0 , K = 0 so E = U
P (± x0 )dx = A2 e −2(
26.
km / 2 )( ω0 / k )
1
2
ω0 = 12 kx02
dx = A2 e −1dx = e −1 P(0)dx = 0.368 P(0)dx
⎞
⎤
d ( Δx )
d ⎛ 1 2K
2 ⎡ 12 K −1/ 2
K 1/ 2
=
−
=0
⎜
⎟=
⎢
2⎥
dK
dK ⎝ 2 m U 0 − E + K ⎠ 2 m ⎣ U 0 − E + K (U 0 − E + K ) ⎦
1 −1/ 2
K 1/ 2
=
K
2
U0 − E + K
( Δx ) max =
27.
or
K = U0 − E
or
1 2(U 0 − E )
1
=
2
m
2(U 0 − E ) 2 2m(U 0 − E )
x < 0 : ψ 0 = A sin k0 x + B cos k0 x
x > 0 : ψ 1 ( x ) = Ce k1x + De − k1x
2mE
with k0 =
2
2m(U 0 − E )
with k1 =
2
We set C = 0 to keep ψ 1 finite as x → ∞. We then apply the continuity conditions on ψ
and dψ / dx at x = 0:
ψ 0 (0) = ψ 1 (0) :
B=D
⎛ dψ 0 ⎞
⎛ dψ 1 ⎞
⎜
⎟ =⎜
⎟ :
⎝ dx ⎠ x =0 ⎝ dx ⎠ x =0
k0 A = − k1D
Thus D = B = − A( k0 / k1 ) = − A E /(U 0 − E ) .
28.
x < 0 : ψ 0 = A′eik0 x + B′e − ik0 x
x > 0 : ψ 1 ( x ) = C ′eik1x + D′e − ik1x
with k0 =
2mE
with k1 =
122
2
2m( E − U 0 )
2
If the particles are incident from them negative x direction, then D′ (the coefficient of the
term that represents a wave in the region of positive x traveling toward the origin) must
be set to 0. We then apply the continuity conditions on ψ and dψ / dx at x = 0:
ψ 0 (0) = ψ 1 (0) :
A′ + B′ = C ′
⎛ dψ 0 ⎞
⎛ dψ 1 ⎞
k0 ( A′ − B′) = k1C ′
⎜
⎟ =⎜
⎟ :
⎝ dx ⎠ x =0 ⎝ dx ⎠ x =0
Solving these two equations, we obtain
C′ =
2 A′
1 + k1 / k0
B′ =
1 − k1 / k0
A′
1 + k1 / k0
The squares of the amplitude ratios give the relative probabilities for the particles to be
reflected at x = 0 or transmitted into the x > 0 region:
Reflection probability:
| B′ |2 ⎛ 1 − k1 / k0 ⎞
=⎜
⎟
| A′ |2 ⎝ 1 + k1 / k0 ⎠
Transmission probability:
| C ′ |2
4
=
2
| A′ |
(1 + k1 / k0 )2
29. (a)
x < 0:
0< x < L:
x > L:
ψ 0 ( x ) = Aeik x + Be − ik x
0
with k0 = 2mE /
0
ψ 1 ( x ) = Cek x + De − k x
1
2
with k1 = 2m(U 0 − E ) /
1
ψ 2 ( x ) = Feik x + Ge − ik x
2
2
with k2 = k0
2
(b) The continuity conditions on ψ and dψ / dx at x = 0 are
ψ 0 (0) = ψ 1 (0) : A + B = C + D
⎛ dψ 0 ⎞
⎛ dψ 1 ⎞
⎜
⎟ =⎜
⎟ : ik0 ( A − B ) = k1 (C − D )
⎝ dx ⎠ x =0 ⎝ dx ⎠ x =0
and at x = L
ψ 1 ( L) = ψ 2 ( L) : Cek L + De − k L = Feik L + Geik L
1
1
0
0
⎛ dψ 1 ⎞
⎛ dψ 2 ⎞
− ik0 L
ik0 L
− k1L
k1L
⎜
⎟ =⎜
⎟ : k1 (Ce − De ) = ik0 ( Fe − Ge )
⎝ dx ⎠ x = L ⎝ dx ⎠ x = L
123
2
(c) G = 0, because no wave can travel right to left in the region x > L if the particles are
incident from x < 0.
x < 0:
30. (a)
0< x < L:
x > L:
ψ 0 ( x ) = Aeik x + Be − ik x
0
with k0 = 2mE /
0
ψ 1 ( x ) = Ceik x + De − ik x
1
with k1 = 2m( E − U 0 ) /
1
ψ 2 ( x ) = Feik x + Ge − ik x
2
2
2
with k2 = k0
2
(b) The continuity conditions on ψ and dψ / dx at x = 0 are
ψ 0 (0) = ψ 1 (0) : A + B = C + D
⎛ dψ 0 ⎞
⎛ dψ 1 ⎞
⎜
⎟ =⎜
⎟ : ik0 ( A − B ) = ik1 (C − D )
⎝ dx ⎠ x =0 ⎝ dx ⎠ x =0
and at x = L
ψ 1 ( L) = ψ 2 ( L) : Ceik L + De − ik L = Feik L + Geik L
1
0
1
0
⎛ dψ 1 ⎞
⎛ dψ 2 ⎞
− ik0 L
ik0 L
− ik1L
ik1L
⎜
⎟ =⎜
⎟ : ik1 (Ce − De ) = ik0 ( Fe − Ge )
⎝ dx ⎠ x = L ⎝ dx ⎠ x = L
(c) G = 0, because no wave can travel right to left in the region x > L if the particles are
incident from x < 0.
3
|ψ|2
2
1
0
-2
-1
0
1
2
In this sketch the barrier extends from x = 0 to x = 1. To the left of the barrier, the
incident and reflected waves combine to form a standing wave (but the minima do not go
to zero, because the reflected wave has smaller amplitude than the indicent wave).
Between x = 0 and x = 1, the particles have a smaller kinetic energy and thus: (1) a larger
de Broglie wavelength, and (2) a slower speed, which means that the probability to find
124
the particles in any interval must be larger. Beyond the barrier (x > L) the probability
density is flat.
31.
(a)
E = n 2 E1 = 102
(b)
Δp =
(c)
Δx ∼
100( hc ) 2
100(1240 eV ⋅ nm) 2
h2
=
=
= 2160 eV
8mL2
8mc 2 L2
8(511,000 eV)(0.132 nm) 2
p 2 = 2mE =
Δp
=
1
1
2mc 2 E =
2(511,000 eV)(2160 eV) = 4.70 × 104 eV/c
c
c
1 hc
1 1240 eV ⋅ nm
=
= 4.2 × 10−3 nm
4
2π cΔp 2π 4.70 × 10 eV
32.
33.
( x )av = ∫
2
L
0
2 L
nπ x
2⎛ L ⎞
|ψ ( x ) | x dx = ∫ x 2 sin 2
dx = ⎜
⎟
0
L
L
L ⎝ nπ ⎠
2
2
3
∫
nπ
0
u 2 sin u du
with u =
nπ x
L
The integral is a standard form that can be found in integral tables.
nπ
2 L2 ⎡ u 3 ⎛ u 2 1 ⎞
u cos 2u ⎤
2 L2 ⎡ ( nπ )3 nπ ⎤
1 ⎞
⎛1
( x )av =
sin
2
u
−
−
−
=
−
= L2 ⎜ − 2 2 ⎟
⎥
⎜
⎟
⎥
3 ⎢
3 ⎢
( nπ ) ⎣ 6 ⎝ 4 8 ⎠
4 ⎦0
( nπ ) ⎣ 6
4 ⎦
⎝ 3 2n π ⎠
2
125
34.
With xav = L / 2 from Example 5.4, we have
2
1 ⎞ ⎛ L⎞
1
1
⎛1
Δx = ( x )av − ( xav ) = L ⎜ − 2 2 ⎟ − ⎜ ⎟ = L
− 2 2
12 2n π
⎝ 3 2n π ⎠ ⎝ 2 ⎠
2
2
2
35. (a) The particle has no preferred direction of motion, so it is equally likely to be moving
in the positive and negative x directions. We therefore expect that pav = 0 .
(b) Because the potential energy is zero inside the well, the kinetic energy is equal to the
total energy:
p 2 h 2n 2
h 2n 2
2
so
K = En or
=
p
=
2m 8mL2
4 L2
For a given level n, p2 is constant so ( p 2 )av has that same value.
(c)
36.
Δp = ( p 2 )av − ( pav ) 2 =
h 2n 2
hn
−0 =
2
4L
2L
2
2
2
2
dψ
d
= A xe − ax = A( e − ax − 2ax 2e − ax ) = Ae − ax (1 − 2ax 2 )
dx
dx
2
2
2
2
dψ
= A[( −4ax )e − ax − (1 − 2ax 2 )( −2ax )e − ax ] = Ae − ax ( −6ax + 4a 2 x 3 )
2
dx
Substituting the second derivative into the Schrödinger equation, we have
−
2
2
2
2
1
Ae − ax ( −6ax + 4a 2 x 3 ) + kx 2 Axe − ax = EAxe − ax
2m
2
After canceling common factors and combining terms,
⎛ k 2 2a 2 ⎞ ⎛ 3a 2
⎞
x ⎜ −
+⎜
− E⎟ = 0
⎟
m ⎠ ⎝ m
⎝2
⎠
2
In order for this to be valid for all possible values of x, both of the quantities in
parentheses must be zero:
3a 2 3 2 ω0m 3
=
=
ω0
or a =
AND
E=
2
2
m
m 2
∞
∞
∞
2 A2 ∞ 2 − u2
A2
π
2
2
2 −2 ax 2
2
2 −2 ax 2
ψ
=
=
=
=
|
(
x
)
|
dx
A
x
e
dx
2
A
x
e
dx
u
e
du
∫−∞
∫−∞
∫0
∫
8a 3 0
2a 3 4
k 2 2a 2
=
2
m
ω0m
126
where we have made the substitution u = x 2a to put the integral into a standard form
that is found in integral tables. Setting the result equal to 1 gives
A =
2
4 2a 3
π
2 ⎛ mω0 ⎞
=4
π ⎜⎝ 2 ⎟⎠
3/ 2
2 ⎛ mω0 ⎞
A = 1/ 4 ⎜
⎟
π ⎝
⎠
or
−∞
∞
∞
∞
− x0
x0
x0
x0
3/ 4
P = ∫ | ψ ( x) |2 dx + ∫ | ψ ( x) |2 dx = 2∫ | ψ ( x) |2 dx = 2 A2 ∫ e−2 ax dx
37.
=2
mω0
π
1
2a
∫
∞
1
2
e − u du =
2
π
∫
∞
1
2
2
e − u du = 0.157
38. (a) The x and y motions are independent, and each contributes an energy of ω0 (n + 12 ) ,
but the integer n is not necessarily the same for the two independent motions. Thus the
total energy is
E = ω0 ( nx + 12 ) + ω0 ( n y + 12 ) = ω0 ( nx + n y + 1)
(b)
4 ω0
4
(0,3), (1,2), (2,1), (3,0)
3 ω0
3
(0,2), (1,1), (2,0)
2 ω0
2
(0,1), (1,0)
ω0
1
(0,0)
Energy
Degeneracy
(nx, ny)
(c) The level with energy N ω0 has N different possible sets of quantum numbers nx , n y .
Both nx and ny range from 0 to N−1 but with their sum fixed to N. The number of
possible values of nx is then N (the values are 0, 1, 2, …, N-2, N-1), and for each value of
nx the value of ny is fixed. The total degeneracy of each level is thus N = n x + n y + 1 .
127
Chapter 6
Why teach the Bohr model? It lays the groundwork for the relationship between
atomic spectroscopy and atomic structure, and as such displays for students a classic
example of how theory is informed by experiment. The model gives a useful (although
ultimately incorrect) picture of how electrons move in atoms; even though the model is
incorrect it offers a quick means to calculate or estimate atomic properties, for example
magnetic dipole moments. It allows some fundamental ideas (such as quantized energy
levels in atoms, quantization of angular momentum, and the correspondence principle) to
be introduced in a simple context.
The Bohr model is also important in its historical context. Why then not
introduce it in that context (that is, prior to de Broglie waves)? The work of Rutherford
and Bohr is more significant in elucidating the properties and structure of atoms than it is
in leading to further developments in quantum physics. Hence it should be presented as a
lead-in to atomic structure.
It is also important to minimize the time between the introduction of the Bohr
model and its negation by the correct quantum theory calculation. This avoids what the
psychologists call “imprinting.” In this ordering of topics, the Bohr model is presented,
its deficiencies are discussed (in the context of our previous discussion of quantum
mechanics), and then we launch quickly into the correct quantum model.
Instructors will note that this text does not present the quantization of angular
momentum based on a calculation in which standing de Broglie waves just fit around the
circumference of a Bohr orbit. In my view this piles misunderstanding on top of
misunderstanding. (Note that Bohr could not have derived quantization of angular
momentum in this way, as his work occurred a decade before de Broglie’s.) Just what is
it that students should regard those standing de Broglie waves as representing? That is, is
there some spatial variation of the electron probability density around the orbit? And
how do we reconcile this with the spherical symmetry of the ground state? In a similar
fashion, how would we draw the standing de Broglie waves for the l = 0 state? This leads
to no productive outcome, so it is better to leave it out.
Supplemental Materials
The University of Colorado PhET collection offers a Rutherford scattering
simulation at http://phet.colorado.edu/en/simulation/rutherford-scattering. Chapter 4 of
Physlet Quantum Physics includes simulations of Thomson and Rutherford scattering.
Suggestions for Additional Reading
A discussion of many of the basic properties of atoms may be found in:
M. R. Wehr, J. A. Richards, and T. W. Adair, Physics of the Atom (Addison-Wesley,
1978).
128
For a historical perspective on the development of atomic theory, see:
H. A. Boorse and L. Motz, editors, The World of the Atom (Basic Books, 1966).
G. K. T. Conn and H. D. Turner, The Evolution of the Nuclear Atom (Iliffe Books, 1965).
F. Friedman and L. Sartori, The Classical Atom (Addison-Wesley, 1965).
For more details on the history of the Thomson and Bohr models, see:
J. L. Heilbron, “J. J. Thomson and the Bohr Atom,” Physics Today, April 1977, p. 23.
J. L. Heilbron, “Bohr’s First Theories of the Atom,” Physics Today, October 1985, p. 28.
For a popular summary of Rutherford’s work, see:
E. N. da C. Andrade, “The Birth of the Nuclear Atom,” Scientific American 195, 93
(November 1956).
The early papers on the Rutherford model and its experimental confirmation illustrate the
difficulty of the experiments and the care and abilities of the experimenters. They are
easily readable and require no mathematics beyond the present level.
E. Rutherford, Philosophical Magazine 21, 669 (1911).
H. Geiger, Proceedings of the Royal Society of London A83, 492 (1910).
H. Geiger and E. Marsden, Philosophical Magazine 25, 604 (1913).
Materials for Active Engagement in the Classroom
A. Reading Quizzes
1. Which of the following is NOT a characteristic of the Bohr model of the structure of
the atom?
(1) Electrons move in circular orbits about the nucleus.
(2) Photons are emitted when an electron jumps from one circular orbit to a
lower-energy orbit.
(3) The circular motion of the electron is consistent with the uncertainty principle.
(4) The angular momentum of each orbit can take only values that are integer
multiples of the smallest value.
2. In the Bohr model:
(1) Electrons move in circular orbits of definite radius.
(2) Electrons move in elliptical orbits.
(3) Electrons moving in the same orbit can have different energies.
(4) Electrons can never jump from one orbit to another.
3. Which of the following is NOT used in the Bohr model of the atom?
(1) Quantization of energy.
(2) Relativistic energy and momentum.
(3) Coulomb’s law for electrostatic forces.
(4) Quantization of angular momentum.
129
4. In a Rutherford scattering experiment:
(1) most of the particles are not scattered at all or scattered only at small angles,
but a few are scattered at large angles.
(2) the experimental results verify that the positive charge of the atom is spread
throughout the volume of the atom.
(3) most particles are scattered only once, but the ones that are scattered at large
angles are scattered many times.
(4) scattering by the negatively charged electrons can cancel scattering by the
positively charged nucleus.
Answers
1. 3
2. 1
3. 2
4. 1
B. Conceptual or Discussion Questions
1. An atom absorbs a photon, so that the electron’s total energy increases by an amount
equal to the photon energy. In the Bohr model, the electron moves to an orbit of
larger radius. what happens to the orbital speed of the electron?
(1) Increases
(2) Decreases
(3) Stays the same
2. In the Bohr model of the hydrogen atom, the speed of the electron is
(1) much smaller than the speed of light, so that nonrelativistic equations can
safely be used.
(2) large enough that the difference between the relativistic and nonrelativistic
equations is important.
(3) very close to the speed of light, so that the extreme relativistic approximation
E = pc should be used.
3. Among the radiations emitted by atomic hydrogen we find one of energy 13.6 eV, the
series limit of the Lyman series (n = ∞ to n = 1). A photon of the same energy also
exists as the limit of a certain series in singly ionized helium (Z = 2). What is the
final value of n for this photon emission?
(1) 1 (2) 2 (3) 3 (4) 4 (5) more than 4
4. A Rutherford scattering experiment is set up with alpha particles incident on a silver
foil, and the scattered alpha particles are observed by a detector at the scattering angle
θ. How does the counting rate (number of counts per second) in the detector change
in each of the following cases? Possible answers are:
(1) Increases (2) Decreases (3) Remains the same (4) Needs more information
(a) The detector moves to larger angles.
(b) The kinetic energy of the incident alpha particles is increased.
(c) The silver foil (Z = 47) is replaced with gold (Z = 79).
(d) The alpha particles are replaced with protons.
(e) The thickness of the foil is decreased.
Answers
1. 2
2. 1
3. 2
4. (a) 2 (b) 2 (c) 1 (d) 2 (e) 2
130
Sample Exam Questions
A. Multiple Choice
1. In Rutherford scattering we ignore the effect of the electrons because:
(a) electrons do not exert any force on alpha particles.
(b) electrons are uniformly distributed throughout the atom.
(c) the electrons are in such rapid motion that the alpha particles do not collide with them.
(d) the mass of an electron is much smaller than the mass of an alpha particle.
2. In a certain Rutherford scattering experiment with alpha particles, the distance of
closest approach between the alpha particles and the nucleus is r. If the kinetic
energy of the alpha particles is doubled, what is the new distance of closest approach?
(a) 2r
(b) 4r
(c) r/2
(d) r/4
3. In Rutherford scattering, what is the approximate ratio of the number of particles
scattered at 10° to the number scattered at 5°?
(a) 1/4
(b) 1/8
(c) 1/16
(d) 1/64
4. When alpha particles of kinetic energy E are incident on nuclei of gold atoms, the
smallest distance between an alpha particle and a nucleus is x. What is the smallest
separation distance when the alpha particle kinetic energy is doubled to 2E?
(d) x/4
(e) x 2
(a) 2x
(b) x/2
(c) x / 2
5. In Rutherford scattering of alpha particles by a gold foil, large deflections can
occasionally be observed because:
(a) a single alpha particle can be scattered many times in encounters with many atoms.
(b) the alpha particle can be deflected by the many atomic electrons of the gold atoms.
(c) the wave nature of the alpha particles causes interference effects.
(d) none of the above.
6. Alpha particles are scattered from a certain nucleus and are observed at scattering
angles of 45o and 135o. For which of these two scattering angles does the nucleus
exert a greater average force on the alpha particles?
(b) 135o
(c) The average force is the same for both angles.
(a) 45o
7. In a scattering experiment, protons pass through a thin foil of silver (Z = 47). The
probability to detect the scattered protons has the value I at an angle of 10.0o relative
to the direction of the original beam of protons. At what angle is the scattering
probability 0.1I?
(b) 5.6o
(c) 2.5o
(d) 17.8o
(e) None of these.
(a) 40.0o
Answers
1. d
2. c
3. c
4. b
131
5. d
6. b
7. d
B. Conceptual
1. Consider two different alpha-particle scattering experiments, one in which the particle
is deflected by 45o and another in which it is deflected from the same target by 135o.
In the 45o scattering experiment, is the maximum force experienced by the alpha
particle greater than, less than, or the same as the maximum force experienced by the
alpha particle in the 135o scattering experiment? EXPLAIN YOUR ANSWER.
Answers
1. less than
C. Problems
1. (a) The Balmer series of lines emitted by doubly ionized lithium (Li++), which has
atomic number 3, consists of electron transitions that end at the first excited state.
Find the limiting wavelength of the Balmer series of doubly ionized lithium.
(b) Find the longest wavelength at which doubly ionized lithium in its ground state
can absorb a photon.
2. (a) Find the energies of the ground state and the first two excited states of the electron
in doubly ionized lithium Li++ (atomic number = 3). Sketch an energy-level
diagram and label each level with its energy and principal quantum number.
(b) If the electron is originally in the second excited state, find the wavelengths of all
photons that can be emitted as the electron eventually reaches the ground state.
3. A neutral atom of Li has 3 electrons. Two of these are removed, leaving an ion of Li++.
(a) What is the longest wavelength at which the ground state of the Li++ ion can
absorb electromagnetic radiation?
(b) How much energy is needed to remove the electron from the ground state of the ion?
(c) When the electron is in its second excited state, it can return to the ground state
through a variety of paths. Find the wavelengths of all possible radiations that
can be emitted in these processes.
4. A neutral atom of the element boron (B) has 5 electrons. Four of the electrons are
removed, forming an ion with the one remaining electron.
(a) Sketch an energy level diagram for this ion, showing the ground state and the first
two excited states. Label each state with the value of its energy.
(b) Calculate the two longest wavelengths at which this ion can absorb radiation.
Assume all absorption occurs from the ground state.
(c) What is the minimum amount of energy needed to remove the electron from the
ground state of this ion?
5. Consider an atom in which a single electron is attached to a positively charged
nucleus. The ionization energy (the minimum energy necessary to completely
remove the electron from the atom in its ground state) is 217.6 eV.
(a) Find the energies of the ground state and the first and second excited states.
132
(b) How many positive charges are there in the nucleus?
(c) What are the longest and shortest wavelengths of the photons that can be absorbed
by this atom in its ground state?
6. (a) Calculate the energies and draw an energy-level diagram showing the ground state
and first 3 excited states of triply ionized Be+++ (Z = 4). Label each state with its
energy and principal quantum number.
(b) The Balmer series in this atom consists of electron transitions from higher states
to the first excited state. Find the longest wavelength in the Balmer series for this
atom, and draw this transition on your energy-level diagram.
(c) If the atom is in its ground state, what is the longest wavelength at which it can
absorb a photon? Indicate this process on your energy-level diagram.
7. In a certain atom with a single electron, the longest wavelength at which absorption in
the ground state will occur is 4.86 nm. For this atom, find:
(a) the energies of the ground state and the first two excited states (sketch an energy
level diagram and label each state with its energy and its principal quantum
number);
(b) the ionization energy (the minimum energy required for an electron in the ground
state to be completely removed from the atom;
(c) the wavelengths of the photons emitted when the electron makes transitions to
lower states beginning in the second excited state.
8. (a) In a certain atom with a single electron, the longest wavelength at which photons
can be absorbed from the ground state is 4.863 nm. What is the atomic number Z
of this atom?
(b) What is the ionization energy (energy necessary to remove the electron from the
ground state) of this atom?
9. In a certain single-electron ion in its ground state, the ionization energy (the energy
needed to completely remove the electron from the ion) is 490 eV.
(a) How many positive charges are in the nucleus of this ion?
(b) What is the wavelength of the photon emitted when the electron jumps from the
first excited state to the ground state?
10. (a) Draw an energy-level diagram showing the ground state and first 3 excited states
of doubly ionized Li (Z = 3). Label each state with its energy.
(b) Calculate the longest-wavelength photon emitted in transitions from the third
excited state.
(c) Calculate the ionization energy of the third excited state.
11. (a) Find the ionization energy (the energy needed to remove the electron) in an “atom”
in which a single electron is attached to a nucleus of boron (atomic number = 5).
(b) Sketch an energy level diagram for this atom showing the ground state and the
first 3 excited states. Label each state with its principal quantum number and its
energy.
133
(c) Find the wavelength of the photon that is emitted when the electron makes a
transition from the first excited state to the ground state.
12. (a) In the Balmer series of emitted transitions in a one-electron atom, the electron
jumps from other states to the first excited state. In doubly ionized lithium
(atomic number = 3), what are the wavelengths of the longest and shortest
members of the Balmer series?
(b) The lifetime of the first excited state is about 10-8 s. Estimate the limit of
precision with which it is possible to measure the energy of that state, and
compare with the energy of the state.
13. (a) An atom of singly ionized helium (atomic number = 2) is initially in its second
excited state. It ends up in the ground state after two photons are emitted from the
atom. Find the energies of the two photons.
(b) How much energy is required to completely remove the electron when the He ion
is in its ground state?
Answers
1. (a) 40.5 nm (b) 13.5 nm
2. (a) -122.4 eV, -30.6 eV, -13.6 eV (b) 72.9 nm, 11.4 nm, 13.4 nm
3. (a) 13.4 nm (b) 122.4 eV (c) 72.9 nm, 11.4 nm, 13.4 nm
4. (a) -340 eV, -85 eV, -37.8 eV (b) 4.86 nm, 4.10 nm (c) 340 eV
5. (a) -217.6 eV, -54.4 eV, -24.2 eV (b) 4 (c) 7.50 nm, 5.70 nm
6. (a) -217.6 eV, -54.4 eV, -24.2 eV, -13.6 eV (b) 41.1 nm (c) 7.60 nm
7. (a) -340 eV, -85 eV, -37.8 eV (b) 340 eV (c) 26.3 nm, 4.10 nm
8. (a) 5 (b) 340 eV
9. (a) 6 (b) 3.37 nm
10. (a) -122.4 eV, -30.6 eV, -13.6 eV, -7.65 eV (b) 208.4 nm (c) 7.65 eV
11. (a) 340 eV (b) -340 eV, -85 eV, -37.8 eV, -21.3 eV (c) 4.86 nm
12. (a) 72.9 nm, 40.5 nm (b) 6 × 10-8 eV
13. (a) 7.6 eV, 40.8 eV (b) 54.4 eV
134
SOLUTIONS
Δp ∼
1.
Δx
=
1 c 1 197 eV ⋅ nm
=
= 1970eV/c
c Δx c 0.10 nm
pav2
pav2 c 2
(1970eV) 2
K av =
=
=
= 3.8 eV
2m 2mc 2 2(0.511 × 106 eV)
This energy is consistent with the observed energies of electrons in atoms.
2. (a)
4π r 2 E =
ε0
=
Ze ⎛ 43 π r 3 ⎞
ε 0 ⎜⎝ 43 π R 3 ⎟⎠
F = eE =
(b)
3. (a)
qenclosed
f =
=
λ=
1
2π
1
2π
k
1
=
m 2π
or
E=
1
Ze
r
4πε 0 R 3
1 Ze2
r
4πε 0 R 3
Ze 2
1
=
3
4πε 0 R m 2π
Ze 2c 2
4πε 0 R 3 mc 2
(1.440 eV ⋅ nm)(3.00 ×108 m/s) 2 (109 nm/m) 2
= 6.57 × 1015 Hz
(0.053nm)3 (0.511×106 eV)
c 3.00 ×108 m/s
=
= 4.57 × 10−8 m = 45.7 nm
15
f 6.57 ×10 Hz
This is about a factor of 3 smaller than the observed wavelength.
(b) With Z = 11 and R = 0.18 nm,
(11)(1.440 eV ⋅ nm)(3.00 × 108 m/s)2 (109 nm/m)2
= 3.48 ×1015 Hz
(0.18 nm)3 (0.511×106 eV)
f =
1
2π
λ=
c 3.00 ×108 m/s
=
= 8.62 ×10−8 m = 86.2 nm
f 3.48 ×1015 Hz
This is nearly an order of magnitude smaller than the observed wavelength.
4. (a) The force on an electron at the radius x due to the positive sphere is given by
Equation 6.2 evaluated for Z = 2:
135
F+ =
1 2e 2 x
4πε 0 R 3
The force exerted on one electron by the other electron (located a distance 2x away) is
F− =
e2
4πε 0 4 x 2
1
At equilibrium, F+ = F− , so
2e 2 x
e2
= 2
R3
4x
or
x=
R
2
5. (a) From Equation 6.8,
b=
Zz e 2
θ
(2)(79)
cot =
(1.440 MeV ⋅ fm) cot 45° = 22.8 fm
2 K 4πε 0
2 2(5.00 MeV)
(b) We can rewrite Equation 6.18 as
1
2
2
mv 2 rmin
−
e2
4πε 0
Zzrmin − 12 mv 2b 2 = 0
which can be analyzed using the quadratic formula to give
2
rmin
⎛ e 2 Zz ⎞
e2 Zz
=
±
+ b2
⎜
2 ⎟
4πε 0mv 2
4
πε
mv
0
⎝
⎠
2
⎛ (1.440 MeV ⋅ fm)(2)(79) ⎞
(1.440 MeV ⋅ fm)(2)(79)
2
=
± ⎜
⎟ + (22.8fm) = 55.0 fm or − 9.5 fm
10.00 MeV
10.00
MeV
⎝
⎠
Only the positive root is physically meaningful, so rmin = 55.0 fm.
(c)
U=
Zz (1.440 MeV ⋅ fm)(2)(79)
=
= 4.14 MeV
4πε 0 rmin
55.0fm
e2
K = E − U = 5.00 MeV − 4.14 MeV = 0.86 MeV
6. From Equation 6.19,
136
K=
d=
7.
e2 Zz (1.440 MeV ⋅ fm)(2)(79)
=
= 33 MeV
4πε 0 d
7.0fm
e 2 Zz (1.440 MeV ⋅ fm)(2)(29)
=
= 14 fm
4πε 0 K
6.0 MeV
8. (a) The density ρ of silver is 10.5 g/cm3 and its molar mass M is 107.9 g/mole. Thus
n=
N A ρ (6.02 × 1023 atoms/mole)(10.5 g/cm3 )
=
= 5.86 × 1022 atoms/cm3 = 5.86 × 1028 atoms/m3
M
107.9 g/mole
At θ = 90°, b =
Zz e 2
θ
(1)(47)
cot =
cot 45° = 6.77 fm
2 K 4πε 0
2 2(5.00 MeV)
f >90° = ntπ b2 = (5.86 × 1028 m −3 )(4.0 × 106 m)(π )(6.77 × 10−15 m) 2 = 3.37 × 10−5
(b) At θ = 10°, b =
Zz e 2
θ
(1)(47)
cot =
cot 5° = 77.4 fm
2 K 4πε 0
2 2(5.00 MeV)
f >10° = ntπ b2 = (5.86 × 1028 m −3 )(4.0 × 106 m)(π )(77.4 × 10−15 m) 2 = 4.41 × 10−3
Zz e 2
θ
(1)(47)
(c) At θ = 5°, b =
cot =
cot 2.5° = 155 fm
2 K 4πε 0
2 2(5.00 MeV)
f >5° = ntπ b2 = (5.86 × 1028 m −3 )(4.0 × 106 m)(π )(155 × 10−15 m) = 1.77 × 10−2
f >5° − f >10° = 1.77 × 10−2 − 4.43 × 10−2 = 1.33 × 10−2
(d) f <5° = 1 − f >5° = 1 − 1.77 × 10−2 = 0.982
9. (a) From Equation 6.19
e2 Zz (1.440 MeV ⋅ fm)(1)(29)
K=
=
= 8.4 MeV
4πε 0 d
5.0fm
(b)
b=
Zz e 2
θ
(1)(29)
cot =
(1.440 MeV ⋅ fm) cot 60° = 1.61 fm
2 K 4πε 0
2 2(7.5 MeV)
(c) We can rewrite Equation 6.18 as
1
2
2 2
min
mv r
and the quadratic formula then gives
137
−
e2
4πε 0
Zzrmin − 12 mv 2b2 = 0
2
rmin
⎛ e 2 Zz ⎞
e2 Zz
=
± ⎜
+ b2
2
2 ⎟
4πε 0mv
⎝ 4πε 0mv ⎠
2
⎛ (1.440 MeV ⋅ fm)(1)(29) ⎞
(1.440 MeV ⋅ fm)(1)(29)
=
± ⎜
+ (1.61fm) 2 = 6.00 fm or − 0.43 fm
⎟
15.0 MeV
15.0 MeV
⎝
⎠
Only the positive root is physically meaningful, so rmin = 6.00 fm.
(d) For copper, ρ = 8.95 g/cm3 and M = 63.5 g/mole, so
n=
N A ρ (6.02 × 1023 atoms/mole)(8.95g/cm3 )
=
= 8.49 × 1028 atoms/m3
M
63.5g/mole
f >120° = ntπ b2 = (8.49 × 1028 m −3 )(12 × 10−6 m)(π )(1.61 × 10−15 m) 2 = 8.3 × 10−6
10.
2
2
ρ Au M Ag Z Au
f >90° (Au) nAu tAuπ bAu
(19.3g/cm3 )(107.9 g/mole)(79) 2
R=
=
=
=
= 2.84
2
2
f >90° (Ag) nAg tAgπ bAg
ρ Ag M Au Z Ag
(10.5g/cm3 )(197.0 g/mole)(47) 2
11. As a rough first approximation, we can assume that the light alpha particle rebounds from
the massive gold nucleus with a final momentum pf that is in magnitude nearly equal to its
initial momentum pi, so that the recoil momentum given to the gold nucleus is
precoil = pi − pf ≅ pi − (− pi ) = 2 pi
This is accurate to within about 2%. The recoil kinetic energy of the gold nucleus is
K recoil =
2
precoil
4(2mα Kα )
4 pi2
4
=
=
= 4(8.0 MeV)
= 0.63 MeV
2M Au 2M Au
2M Au
197
12. Let pi and pf represent the initial and final momentum of the alpha particle, and let Ki and
Kf be its initial and final kinetic energies. Then conservation of momentum and energy
give pi = pf + pe and K i = K f + K e , or
138
p 2 ( p − pe ) 2
p2
p2
p2
pi2
p2
p2 2 p p
= f + e = i
+ e = i − i e+ e + e
2mα 2mα 2me
2mα
2me 2mα
2mα
2mα 2me
⎛ 1
pi pe
1 ⎞
= pe2 ⎜
+
⎟
mα
⎝ 2mα 2me ⎠
Ki − Kf = Ke =
pe =
or
2 pi
1 + me / mα
pe2
4mα
4 pi2
pi2
=
=
2
2me 2me (1 + me / mα )
2mα (1 + me / mα ) 2
= (8.0 MeV)
4(7294)
= 0.0044 MeV
(1 + 7294) 2
13. The potential energy at minimum separation is U = E − K = 4.8 MeV, so
rmin =
e2 Zz (1.440 MeV ⋅ fm)(2)(47)
=
= 28.2 fm
4πε 0 U
4.8 MeV
From conservation of angular momentum (Equation 6.17), we obtain
b = rmin
cot
14.
n=
θ
2
=
vmin
K min
4.8 MeV
= rmin
= (28.2 fm)
= 19.9 fm
v
K
9.6 MeV
8πε 0 Kb
(2)(9.6 MeV)(19.9 fm)
=
= 2.828 or θ = 38.9°
2
Zze
(2)(47)(1.440 MeV ⋅ fm)
N A ρ (6.02 ×1023 atoms/mole)(19.3 g/cm3 )
=
= 5.90 ×1028 atoms/m3
M
(197 g/mole)(10−2 m/cm)3
2
2
nt ⎛ Zz ⎞ ⎛ e 2 ⎞
1
N (θ ) = 2 ⎜
⎟
⎟ ⎜
4
4r ⎝ 2 K ⎠ ⎝ 4πε 0 ⎠ sin θ / 2
2
(5.90 ×1028 m −3 )(3.0 ×10−6 m) ⎡ (2)(79)(1.440 MeV ⋅ fm) ⎤
1
=
= 0.246 m −2
⎢
⎥
2
4
4(0.12 m)
2(6.0
MeV)
sin
15
°
⎣
⎦
This gives the probability per unit area for an alpha particle to be scattered into the
detector. The area of the detector is π(0.50 cm)2 = 7.96 × 10−6 m2. The total probability
for an alpha particle to strike the detector is (0.246 m −2 )(7.96 × 10−6 m 2 ) = 1.96 × 10−6 .
That is, each alpha particle has a probability of 1.96 × 10−6 to be scattered into the
detector. If the rate of incident particles is 3.0 × 107 s−1, the rate at which they strike the
detector is (1.96 ×10−6 )(3.0 ×107 s −1 ) = 59 s −1 .
139
15.
The shortest wavelength is the series limit. For the Lyman series, n0 = 1 and Equation
6.21 becomes
n2
λ = (91.13 nm) 2
n = 2,3, 4,…
n −1
which gives λ = 121.51 nm (n = 2), 102.52 nm (n = 3), 97.21 nm (n = 4).
16.
For the Brackett series, n0 = 4. With λ = 1944 nm, Equation 6.21 gives
n2
1944 nm = (1458 nm) 2
n − 42
which can be solved to give n = 8. The next higher (n = 7) and next lower (n = 9) lines
are
72
92
λ = (1458 nm) 2 2 = 2165 nm
λ = (1458 nm) 2 2 = 1817 nm
7 −4
9 −4
17. For the Pfund series, n0 = 5 and the longest wavelength corresponds to n = 6. Solving
Equation 6.21 for the series limit, we have
λlimit = λ
18.
n 2 − n02
6 2 − 52
(7459
nm)
=
= 2279 nm
n2
62
r3 = 9a0 = 9(0.0529 nm) = 0.476 nm
v=
3(1240 eV ⋅ nm) / 2π
n
n c
=c 2 =c
= 2.43 ×10−3 c = 7.30 × 105 m/s
6
mr
mc r
(0.511×10 eV)(0.476 nm)
U =−
K=
1.440 eV ⋅ nm
e2 1
=−
= −3.02 eV
4πε 0 r
0.476 nm
e2 1 1.440 eV ⋅ nm
=
= 1.51 eV
8πε 0 r 2(0.476 nm)
19. The Lyman series consists of transitions from higher levels to the n2 = 1 level. The series
limit would be the transition with the highest energy, corresponding to a jump from n1 =
∞ to n2 = 1. The wavelength is found from Equation 6.33:
λ=
1 ⎛ n12 n22 ⎞ n22 ⎛ n12 ⎞
1
=
=
= 91.13 nm
⎜ 2
⎜ 2
2 ⎟
2 ⎟
R∞ ⎝ n1 − n2 ⎠ R∞ ⎝ n1 − n2 ⎠ 1.09737 ×107 m −1
For the Paschen series (n2 = 3), the series limit is (with n1 = ∞)
140
λlimit =
20.
(a) From Equation 6.26, v =
n22
9
=
= 820.1 nm
R∞ 1.09737 × 107 m −1
n
n
=
. Using Equation 6.29 for a0, we obtain
mr mn 2 a0
v=
nm(4πε 0
2
2
/ me )
=
1 αc
=
4πε 0 n
n
e2
(b) When the nuclear charge is Ze, we must replace e2 with Ze2, so v = Zα c / n .
−13.6 eV
= −0.544 eV . An electron in this
25
state can make transitions to any of the lower states with n = 4 (E4 = −0.850 eV), n = 3
(E3 = −1.51 eV), n = 2 (E2 = −3.40 eV), and n = 1 (E1 = −13.6 eV). The transition
energies are:
21. The energy of the initial n = 5 state is E5 =
5 → 4 : ΔE = E5 − E4 = −0.544 eV − (−0.850 eV) = 0.306 eV
5 → 3 : ΔE = E5 − E3 = −0.544 eV − (−1.51 eV) = 0.97 eV
5 → 2 : ΔE = E5 − E2 = −0.544 eV − (−3.40 eV) = 2.86 eV
5 → 1: ΔE = E5 − E1 = −0.544 eV − (−13.6 eV) = 13.1 eV
22. The Paschen series consists of transitions from higher levels that end in the n = 3 level.
The energies and wavelengths are:
⎛ 1 1⎞
4 → 3 : ΔE = (−13.60 eV) ⎜ 2 − 2 ⎟ = 0.661eV
⎝4 3 ⎠
⎛1 1⎞
5 → 3 : ΔE = (−13.60 eV) ⎜ 2 − 2 ⎟ = 0.967 eV
⎝5 3 ⎠
⎛ 1 1⎞
6 → 3 : ΔE = (−13.60 eV) ⎜ 2 − 2 ⎟ = 1.133eV
⎝6 3 ⎠
⎛ 1 1⎞
7 → 3 : ΔE = (−13.60 eV) ⎜ 2 − 2 ⎟ = 1.234 eV
⎝7 3 ⎠
1240 eV ⋅ nm
= 1876 nm
0.661 eV
1240 eV ⋅ nm
λ=
= 1282 nm
0.967 eV
1240 eV ⋅ nm
λ=
= 1094 nm
1.133 eV
1240 eV ⋅ nm
λ=
= 1005 nm
1.234 eV
λ=
The series limit is 1.511 eV, corresponding to a wavelength of 820.5 nm.
141
n=∞
n=7
n=6
n=5
n=4
1005
…
820.5
1.234
…
1.511
1094
1.133
1282
0.661
Photon
energy
(eV)
0.967
1876
Photon
wavelength
(nm)
…
E3 = -1.511 eV
n=3
23.
E∞ = 0.000 eV
E7 = -0.278 eV
E6 = -0.378 eV
E5 = -0.544 eV
E4 = -0.850 eV
The photon energies of the incident light are
E=
hc
λ
=
1240 eV ⋅ nm
= 21.0 eV
59.0 nm
When an atom in the ground state absorbs a 21.0-eV photon, the atom is ionized (which
takes 13.6 eV). The excess energy, 21.0 eV − 13.6 eV = 7.4 eV, appears as the kinetic
energy of the electron, which is now free of the atom. Neglecting a small recoil kinetic
energy given to the proton, the electrons have a kinetic energy of 7.4 eV.
24. (a) The ionization energy is the magnitude of the energy of the electron. For the n = 3
level of hydrogen
−13.6 eV
E3 =
= 1.51 eV
9
(b) For singly ionized helium (Z = 2) we use Equation 6.38:
En =
(c)
En =
( −13.6 eV)Z 2
( −13.6 eV)2 2
=
= 13.6 eV
n2
22
( −13.6 eV)Z 2
( −13.6 eV)32
=
= 7.65 eV
n2
42
142
25. (a)
⎛ 1 1 ⎞
E (4 → 2) = E4 − E2 = (−13.6 eV) ⎜ 2 − 2 ⎟ = 2.55 eV
⎝4 2 ⎠
⎛ 1 1⎞
E (4 → 3) = E4 − E3 = (−13.6 eV) ⎜ 2 − 2 ⎟ = 0.661 eV
⎝4 3 ⎠
⎛1 1 ⎞
E (3 → 2) = E3 − E2 = (−13.6 eV) ⎜ 2 − 2 ⎟ = 1.89 eV
⎝3 2 ⎠
E (4 → 3) + E (3 → 2) = 0.661 eV + 1.89 eV = 2.55 eV = E (4 → 2)
(b)
⎛ 1 1⎞
E (4 → 1) = E4 − E2 = (−13.6 eV) ⎜ 2 − 2 ⎟ = 12.8 eV
⎝4 1 ⎠
⎛ 1 1⎞
E (2 → 1) = E2 − E1 = (−13.6 eV) ⎜ 2 − 2 ⎟ = 10.2 eV
⎝2 1 ⎠
E (4 → 2) + E (2 → 1) = 2.55 eV + 10.2 eV = 12.8 eV = E (4 → 1)
26.
The Lyman series consists of transitions that end in the n = 1 level. The smallest energy
difference, corresponding to the longest wavelength, is n = 2 to n = 1.
⎛ 1 1⎞
ΔE = E2 − E1 = (−13.6 eV)22 ⎜ 2 − 2 ⎟ = 40.8 eV
⎝2 1 ⎠
λ=
hc 1240 eV ⋅ nm
=
= 30.4 nm
ΔE
40.8 eV
The largest energy difference would correspond to transitions from n = ∞ to n = 1:
1⎞
⎛
ΔE = E∞ − E1 = (−13.6 eV)22 ⎜ 0 − 2 ⎟ = 54.4 eV
⎝ 1 ⎠
λ=
hc 1240 eV ⋅ nm
=
= 22.8 nm
ΔE
54.4 eV
27. Using Equation 6.38, we have En = ( −13.6 eV)Z 2 / n 2 = ( −54.4 eV) / n 2 ,
so E1 = −54.40 eV, E2 = −13.60 eV, E3 = −6.04 eV, E4 = −3.40 eV . The possible
transitions are:
143
4 → 1: ΔE = E4 − E1 = 51.00 eV
λ = hc / ΔE = 24.31 nm
4 → 2 : ΔE = E4 − E2 = 10.20 eV
λ = hc / ΔE = 121.6 nm
4 → 3 : ΔE = E4 − E3 = 2.64 eV
λ = hc / ΔE = 469.7 nm
3 → 1: ΔE = E3 − E1 = 48.36 eV
λ = hc / ΔE = 25.64 nm
3 → 2 : ΔE = E3 − E2 = 7.56 eV
λ = hc / ΔE = 164.0 nm
λ = hc / ΔE = 30.39 nm
30.39 nm
164.0 nm
25.64 nm
469.7 nm
121.6 nm
24.31 nm
2 → 1: ΔE = E2 − E1 = 40.80 eV
n=4
n=3
n=2
E4 = -3.40 eV
E3 = -6.04 eV
E2 = -13.60 eV
n=1
E1 = -54.40 eV
28. The gravitational force law is F = Gmemp / r 2 instead of F = e 2 / 4πε 0 r 2 . The Bohr theory
can thus be directly applied if we substitute Gme mp for e 2 / 4πε 0 . Equation 6.29 becomes
a0 =
2
Gme2 mp
=
(6.67 × 10−11
(1.05 × 10−34 J ⋅ s) 2
= 1.19 × 1029 m
−31
−27
2
2
2
N ⋅ m /kg )(9.11 × 10 kg) (1.67 × 10 kg)
2 3 2
me
1 ⎞ 3G me mp
2⎛ 1
E2 − E1 = − 2 (Gme mp ) ⎜ 2 − 2 ⎟ =
2
8 2
⎝2 1 ⎠
3(6.67 × 10−11 N ⋅ m 2 /kg 2 ) 2 (9.11× 10−31 kg)3 (1.67 × 10−27 kg)2
=
= 3.2 × 10−97 J = 2.0 ×10 −78 eV
2
−34
8(1.05 ×10 J ⋅ s)
144
29. (a) If the circumference is an integral number of de Broglie wavelengths ( 2π r = nλ ),
then after each orbit the waves will align, peak to peak and valley to valley, to give
standing waves.
h nh
nh
so
mvr =
=n
(b) 2π r = nλ = n =
p mv
2π
30. Let V1 = 4 V, V2 = 7 V, and V3 = 9 V. Then decreases in the current should be observed
at the following voltages:
V1 = 4 V
V2 = 7 V
2V1 = 8 V
V3 = 9 V
V1 + V2 = 11 V
31.
3V1 = 12 V
V1 + V3 = 13 V
2V2 = 14 V
2V1 + V2 = 15 V
4V1 = 16 V
2V1 + V3 = 17 V
2V3 = 18 V
3V1 + V3 = 19 V
5V1 = 20 V
The energy difference between the ground state and the first excited state is
E=
hc
λ
=
1240 eV ⋅ nm
= 2.10 eV
590 nm
At V = 2.10 V, we expect to see a decrease in the current, as atoms are raised to the first
excited state.
32. The energy uncertainty of a state with a lifetime of 10−8 s is
ΔE ∼
Δt
=
6.58 × 10−16 eV ⋅ s
= 6.58 × 10−8 eV
10−8 s
This energy uncertainty will be equal to the spacing ΔE = hf with f given by Equation
6.43 when n is large:
ΔE = hf =
n=
3
2
me 4
16π 2ε 02
2
1
mc 2 ⎛ e 2 ⎞ 1
=
⎜
⎟
n3 ( c) 2 ⎝ 4πε 0 ⎠ n3
mc 2 (e 2 / 4πε 0 ) 2
(0.511×106 eV)(1.440 eV ⋅ nm)2
3
=
= 746
ΔE ( c) 2
(6.58 ×10−8 eV)(197 eV ⋅ nm) 2
r = n 2 a0 = (746) 2 (5.29 ×10−11 m) = 29 μ m
33. (a) The frequency of revolution is given by Equation 6.41:
145
fn =
me 4
32π 3ε 02
3
1
1
me 4
=
n3 π 32π 2ε 02
2
1 13.6 eV 1 6.58 ×1015 Hz
=
=
π
n3
n3
n3
A similar calculation gives the radiation frequency from Equation 6.42:
f =
me 4
64π ε
3
2 3
0
2n − 1
13.6 eV 2n − 1
2n − 1
=
= (6.58 × 1015 Hz) 2
2
2
2
n (n − 1)
2π
n (n − 1)
2n ( n − 1) 2
2
For n = 10, we get f n = 6.58 ×1012 Hz and f = 7.72 × 1012 Hz .
(b) For n = 100, f n = 6.58 ×109 Hz and f = 6.68 × 109 Hz .
(c) For n = 1000, f n = 6.58 ×106 Hz and f = 6.59 × 106 Hz .
(d) For n = 10,000, f n = 6.58 ×103 Hz and f = 6.58 × 103 Hz . Note how f approaches f n
as n becomes large, in accordance with the correspondence principle.
34. The Rydberg constant in ordinary hydrogen is
⎛
⎛ 5.48580 × 10−4 u ⎞
m ⎞
=
RH = R∞ ⎜ 1 +
R
⎟
∞ ⎜1 +
⎟ = R∞ (1.000544)
MH ⎠
1.007825 u ⎠
⎝
⎝
and in “heavy” hydrogen or deuterium:
⎛
⎛ 5.48580 × 10−4 u ⎞
m ⎞
=
RD = R∞ ⎜ 1 +
R
⎟
∞ ⎜1 +
⎟ = R∞ (1.000272)
MD ⎠
2.104102 u ⎠
⎝
⎝
From Equation 6.33 the difference in wavelengths for the first line of the Balmer series (n
= 3 to n = 2) is
⎛ 1
1 ⎞ ⎛ 3222 ⎞
7.2
⎛
1
1
⎞
−
=
−
λD − λ H = ⎜
⎟⎜ 2
⎟ = 0.178 nm
2 ⎟
7
-1 ⎜
⎝ RD RH ⎠ ⎝ 3 − 2 ⎠ 1.09737 × 10 m ⎝ 1.000272 1.000544 ⎠
This small wavelength difference led to the discovery of deuterium in 1931.
35. (a) 15 different transitions are possible: 6 → 5, 6 → 4, 6 → 3, 6 → 2, 6 → 1, 5 → 4, 5 →
3, 5 → 2, 5 → 1, 4 → 3, 4 → 2, 4 → 1, 3 → 2, 3 → 1, 2 → 1.
(b) Only 5 of the transitions change n by one unit.
(c) One.
146
36. (a) From the n = 8 level, downward transitions are possible to any level of smaller n. The
transitions with the longest wavelengths are those with the smallest energy differences.
8→7:
λ=
8→6:
1
82
)
− 712 = 0.260 eV
hc 1240 eV ⋅ nm
=
= 4.77 μ m
ΔE
0.260 eV
(
ΔE = E8 − E6 = (−13.6 eV)Z2
λ=
8→5:
(
ΔE = E8 − E7 = (−13.6 eV)Z2
1
82
hc 1240 eV ⋅ nm
=
= 1.88 μ m
ΔE
0.661 eV
(
ΔE = E8 − E5 = (−13.6 eV)Z2
1
82
)
− 612 = 0.661 eV
)
− 512 = 1.33 eV
hc 1240 eV ⋅ nm
=
= 0.935 μ m
ΔE
1.33 eV
(b) The transition with the shortest wavelength is the one with the largest energy
difference.
λ=
8→1:
ΔE = E8 − E1 = (−13.6 eV)Z2
(
1
82
)
− 112 = 53.6 eV
hc 1240 eV ⋅ nm
=
= 23.2 nm
ΔE
53.6 eV
(c) From the n = 8 level, the atom can absorb a photon and the electron will jump to a
state of larger n. The longest absorption wavelengths correspond to the smallest energy
differences.
λ=
8→9:
ΔE = E9 − E8 = (−13.6 eV)Z2
λ=
8→10:
)
− 812 = 0.178 eV
(
1
102
)
− 812 = 0.306 eV
hc 1240 eV ⋅ nm
=
= 4.05 μ m
ΔE
0.306 eV
ΔE = E11 − E8 = (−13.6 eV)Z2
λ=
1
92
hc 1240 eV ⋅ nm
=
= 6.95 μ m
ΔE
0.178 eV
ΔE = E10 − E8 = (−13.6 eV)Z2
λ=
8→11:
(
(
1
112
)
− 812 = 0.400 eV
hc 1240 eV ⋅ nm
=
= 3.10 μ m
ΔE
0.400 eV
(d) The shortest absorption wavelength corresponds to the largest energy difference.
147
8→ ∞:
(
)
ΔE = E∞ − E8 = (−13.6 eV)Z2 0 − 812 = 0.850 eV
λ=
hc 1240 eV ⋅ nm
=
= 1.46 μ m
ΔE
0.850 eV
37. The time Δt in which we must measure the energy of the state is no greater than the
lifetime of that state, and the energy measurement must be uncertain by an amount ΔE
given by the uncertainty principle.
ΔE ∼
Δt
=
6.58 ×10−16 eV ⋅ s
= 7 × 10−8 eV
10−8 s
This energy uncertainty is negligible compared with the energy of the first excited state
(−3.4 eV). There are very few measurements that are capable of determining energies to
1 part in 108, and thus the energy uncertainty does not affect the observed photon
energies in most experiments.
38. For a transition from n to n0,
λ=
n 2 n02
hc
1240 eV ⋅ nm
=
=
(22.78
nm)
ΔE (−13.6 eV) Z 2 (1/ n 2 − 1/ n02 )
n 2 − n02
Transitions ending on the state with n0 = 1 (analogous to the Lyman series in hydrogen)
have wavelengths ranging from 22.78 nm (for jumps from n = ∞) to 30.38 nm (for jumps
from n = 2). Transitions ending with n0 = 2 (similar to the Lyman series) have
wavelengths from 91.13 nm (n = ∞) to 164.0 nm (n = 3). Those ending with n0 = 3 range
from 205.0 nm (n = ∞) to 468.6 nm (n = 4).
For a given value of n0, we can solve for n:
n=
1
1/ n − (22.78 nm)/λ
2
0
The first two given wavelengths (24.30 nm and 25.63 nm) fall in the range of transitions
with n0 = 1, so we find
n=
1
=4
1 − (22.78 nm)/(24.30 nm)
and
n=
1
=3
1 − (22.78 nm)/(25.63 nm)
The transition with wavelength 102.5 nm belongs to the group with n0 = 2:
n=
1
=6
1/ 4 − (22.78 nm)/(102.5 nm)
148
and 320.4 nm belongs to the group with n0 = 3:
n=
1
=5
1/ 9 − (22.78 nm)/(320.4 nm)
39. For a transition from n to n0 in lithium (Z = 3),
λ=
n 2 n02
hc
1240 eV ⋅ nm
=
=
(10.13
nm)
ΔE (−13.6 eV) Z 2 (1/ n 2 − 1/ n02 )
n 2 − n02
The range of wavelengths for each series is: 10.13 nm to 13.50 nm for n0 = 1; 40.50 nm to
72.90 nm for n0 = 2; 91.17 nm to 208.4 nm for n0 = 3; and so forth. The wavelengths
given for this problem clearly fall in the group with n0 = 2, for which
n=
1
1/ 4 − (10.13 nm)/λ
This gives n = 3 for 72.90 nm and n = 4 for 54.00 nm. The next member of the series
corresponds to n = 5, which has wavelength
λ=
hc
52 2 2
== (10.13 nm) 2
= 48.23 nm
ΔE
5 − 22
40. Let p and E be the momentum and energy of the photon, and assume the atom is at rest
before the photon is emitted. Then conservation of momentum and energy give:
pinitial = pfinal :
0 = p − pR
Einitial = Efinal :
E1 = E2 + E + K R
Using nonrelativistic kinetic energy for the recoil of the atom, pR = 2MK R , and
substituting E = cp = cpR , we obtain
E1 − E2 = cpR + K R = 2 Mc 2 K R + K R
Because we expect K R
solve for KR:
Mc 2 , the second term on the right can be neglected and we can
( E1 − E2 ) 2
KR ≅
2 Mc 2
For the n = 2 to n = 1 transition in hydrogen, we have
149
KR =
[−3.4 eV − (−13.6 eV)]2
= 5.5 ×10−8 eV
6
2(1.007825 u)(931.5 × 10 eV/u)
This is indeed a very small recoil energy, which can be neglected when we consider the
energies of the emitted photons.
41. (a) Equation 6.30 shows that the energy levels are directly proportional to the mass of the
electron. If the electron is replaced by a particle with 207 times its mass, then the
energies of the levels are increased by a factor of 207. The ground-state energy is thus
E1 = (−13.6 eV)(207) = −2.82 keV . The shortest wavelength (largest energy) of the
Lyman series represents a jump from n = ∞ (E = 0) to n = 1, so the energy of the photon
is 2.82 keV and its wavelength is
λ=
hc 1280 eV ⋅ nm
=
= 0.440 nm
ΔE
2820 eV
This is in the X-ray region of the electromagnetic spectrum.
(b) The correction for the finite nuclear mass is given by
−1
−1
⎛ 207(5.49 × 10−4 u) ⎞
m⎞
⎛
R = R∞ ⎜1 + ⎟ = R∞ ⎜1 +
⎟ = R∞ /1.113 = 0.899 R∞
1.007825 u
⎝ M⎠
⎝
⎠
The correction for muonic hydrogen is 11.3%, in contrast with the 0.055% correction for
electronic hydrogen. Because the wavelengths are inversely proportional to the Rydberg
constant (Equation 6.33), the shortest wavelength in the Lyman series would be increased
from 0.440 nm to (0.440 nm)/0.899 = 0.490 nm.
42. We can use Equation 6.38, with the electron mass m replaced by the muon mass which is
207 times the electron mass. For n = 1, we obtain
r1 =
a0
= 3.11×10−15 m = 3.11 fm
(207)(82)
This is less than the nuclear radius of 7 fm, which suggests that the muon is inside the
nucleus! (However, we originally set up the calculation of the hydrogen-like atoms by
assuming that the electron experienced the full nuclear charge of Ze. If the muon spends
at least part of its time inside the nucleus, it will not experience the full Coulomb force,
so the calculation is no longer exact.)
150
Chapter 7
This chapter presents the solutions to the Schrödinger equation for the Coulomb
potential energy and thus obtains the wave functions for the hydrogen atom. A new
feature of this edition is the opening section on the solutions for the one-dimensional
Coulomb problem. This problem has no physical application, but it serves as a chance to
review some aspects of solutions to the Schrödinger equation and their interpretation. It
also addresses some of the deficiencies of the Bohr model discussed at the end of the
previous chapter. Finally, it eases the transition into the full-blown formalism in
spherical polar coordinates. References to papers on the one-dimensional hydrogen atom
are given below.
Supplemental Materials
Simulations of the wave functions for the one-dimensional and three-dimensional
Coulomb potential energies are available in the University of Colorado PhET simulation
of various bound state problems: http://phet.colorado.edu/en/simulation/bound-states.
These simulations permit display of the real and imaginary parts of the wave function,
which can be seen to oscillate even though the probability distribution remains constant
in time. Chapter 14 of Physlet Quantum Physics gives plots of the radial wave functions
and probability densities, and a Physlet for producing density plots of the angular wave
functions is at http://webphysics.davidson.edu/physletprob/ch10_modern/angular.html.
Another applet for displaying the complete hydrogenic wave functions can be found at
http://www.falstad.com/qmatom/. A Maple worksheet that produces 3-dimensional
displays of hydrogenic wave functions is at:
http://www.physics.oregonstate.edu/portfolioswiki/doku.php?id=activities:main&file=cfh
ydrogenvis.
Suggestions for Additional Reading
For a more detailed treatment of the hydrogen atom, especially of the fine structure, see:
J. Norwood, Twentieth Century Physics (Prentice-Hall, 1976).
An excellent and detailed full-scale treatment of the solutions of the Schrödinger
equation for the hydrogen atom is Chapter V of:
L. Pauling and E. B. Wilson, Introduction to Quantum Mechanics (McGraw-Hill, 1935).
Representing the three-dimensional probability distributions on a two-dimensional paper
is a great challenge for illustrators, and the interpretation of such illustrations is often a
similar challenge for students. It might be helpful to look at some other representations:
N. Ashby and S. C. Miller, Principles of Modern Physics (Holden-Day, 1970).
S. Brandt and H. D. Dahmen, The Picture Book of Quantum Mechanics, 3rd ed.,
(Springer, 2000).
R. Eisberg and R. Resnick, Quantum Physics of Atoms, Molecules, Solids, Nuclei,
151
and Particles, 2nd ed. (Wiley, 1985).
D. Kleppner, M. G. Littman, and M. L. Zimmerman, “Highly Excited Atoms,” Scientific
American 244, 130 (May 1981).
R. B. Leighton, Principles of Modern Physics (McGraw-Hill, 1959).
References on the one-dimensional hydrogen atom are:
R. Loudon, “One-Dimensional Hydrogen Atom,” American Journal of Physics 27, 649 (1959).
L. K. Haines and D. H. Roberts, “One-Dimensional Hydrogen Atom,” American Journal of
Physics 37, 1145 (1969).
Materials for Active Engagement in the Classroom
A. Reading Quizzes
1. How do the energy levels in a hydrogen atom depend on the orbital angular
momentum quantum number?
(1) The energy increases as the orbital angular momentum increases.
(2) The energy decreases as the orbital angular momentum increases.
(3) The energy does not depend on the orbital angular momentum.
2. In which of the following does the quantum mechanical picture of the hydrogen atom
give the same result as the Bohr model?
(1) The energy levels of the electron.
(2) The orbital radius of the electron.
(3) The angular momentum of the electron.
(4) The probability distribution of the electron.
3. Which statement about electron spin is not true?
(1) The spin can be measured only when the atom is in a magnetic field.
(2) The z component of the spin of the electron can never be zero.
(3) The degeneracy of the hydrogen levels doubles when the electron spin is included.
(4) The spin quantum number of the electron is always 1/2.
4. In which states of hydrogen is the probability to locate the electron independent of the
direction in space?
(4) All l = 0 states
(1) None
(2) Only the n = 1 state
(3) Only ml states
Answers
1. 3
2. 1
3. 1
4. 4
B. Conceptual or Discussion Questions
1. How many of the following sets of quantum numbers n,l,ml are allowed for the
hydrogen atom? (i) 1,0,0 (ii) 1,0,1 (iii) 1,1,0 (iv) 1,1,1
(1) One
(2) Two
(3) Three
(4) Four
(5) None
152
2. In the set of quantum numbers n,l,ml = 2,x,1 what are the possible values of x?
(1) x = 0 only
(2) x = 0 or 1
(3) x = 1 or 2
(4) x = 1 only
(5) x = ±1
3. (a) How many sets of quantum numbers n,l,ml are possible for n = 4?
(b) How many of the possible sets of quantum numbers n,l,ml for n = 4 have l = 2?
(c) How many of the possible sets of quantum numbers n,l,ml for n = 4 have ml = 0?
4. In a Stern-Gerlach type of experiment on an atom (such as boron) with a single 2p
electron, into how many components would the beam be split?
(1) 2
(2) 3
(3) 5
(4) 6
(5) 8
Answers
1. 1
2. 4
3. (a) 16 (b) 5 (c) 4
4. 4
Sample Exam Questions
A. Multiple Choice
1. Which of the following can also be quantum numbers of an l = 2 electron in
hydrogen?
(b) n = 0
(c) n = 2
(d) ml = 0
(a) ml = 1/2
2. Which of the following is an allowed set of quantum numbers n,l,ml,ms for an
electron in a hydrogen atom?
(a) 3,2,3,1/2
(b) 3,3,2,-1/2
(c) 3,1,0,-1/2
(d) 2,1,1,0
3. Which of the following sets of quantum numbers n,l,ml,ms is not allowed for an
electron in a hydrogen atom?
(a) 2,0,0,+1/2
(b) 3,2,-2,-1/2
(c) 3,1,1,-1/2
(d) 2,2,0,1/2
4. If an angular momentum vector has a maximum z component of +3 , how many
different z components can it have?
(a) 7
(b) 6
(c) 5
(d) 3
5. An electron is in an n = 2 state in a hydrogen atom. Which of the following can also
be quantum numbers that describe that state of the electron?
(c) l = −1, ml = 0
(d) l = 1, ml = −1
(a) l = 2, ml = 0 (b) l = 1, ml = +½
6. The quantum number ml provides information about what property of a hydrogen atom?
(a) Energy (b) Orbital radius (c) Magnitude of the orbital angular momentum
(d) z component of the orbital angular momentum
7. Which of the following sets of quantum numbers n,l,ml is not allowed for the electron
in an atom of hydrogen?
153
(a) 3,0,0
(b) 3,2,-2
(c) 2,1,+1
(d) 2,2,-1
8. Relative to the z axis, how many possible directions are there in space for the orbital
angular momentum vector that represents an electron in a 4f state (n = 4, l = 3)?
(a) 2
(b) 3
(c) 5
(d) 7
(e) 9
Answers
1. d
2. c
3. d
4. a
5. d
6. d
7. d
8. d
B. Conceptual
1. Excluding cases in which the angular momentum is zero, is the length of the angular
momentum vector that describes an electron in an atom always equal to, either
greater than or equal to, or always greater than the maximum possible z component
of the angular momentum? EXPLAIN YOUR ANSWER.
2. For a certain electronic state in hydrogen, the angular part of the wave function is
Θ(θ ) = C sin θ cosθ . Is the electron described by this wave function most likely to be
found close to the z axis, close to the xy plane, or somewhere in between? EXPLAIN
YOUR ANSWER. (θ is the polar angle between r and the z axis.)
3. The angular part of one of the 2p wave functions in atomic hydrogen is A sin θ, where
A is a constant. (θ is the polar angle between the z axis and the line connecting the
electron to the origin.) Does this electron have a greater probability to be found near
the z axis or near the xy plane? EXPLAIN YOUR ANSWER.
Answers
1. always greater than
2. somewhere in between
3. near the xy plane
C. Problems
1. The radial part of the 2p wave function of atomic hydrogen is Cre-r/2a0 where C =
(24a05)-1/2. Consider two very thin spherical shells, each of thickness dr. One shell
has radius 2a0 and the other has radius 4a0. Find the ratio of the probability to find
the electron in the larger shell to the probability to find it in the smaller shell.
(Here “in the shell” means between r and r + dr.)
2. The 2p (l = 1) radial wave function of an electron in atomic hydrogen is
r
R(r ) = A e − r / 2 a0
a0
where A is a constant.
(a) Find the most probable value of r, that is, the most probable distance between the
electron and the nucleus.
(b) List all possible sets of quantum numbers that can describe an electron in this state
154
3. (a) The radial part of the wave function of the n = 2, l = 1 electron in a hydrogen atom is
1
r − r / 2 a0
R (r ) =
e
3/ 2
3(2a0 ) a0
Find all maxima and minima of the radial probability density and sketch the radial
probability density as a function of r.
(b) List all possible l values for an electron in hydrogen with n = 2. For each l value,
list all possible values of ml.
4. (a) The radial part of the 2p hydrogen wave function is
R (r ) = Are − r / 2 a0
where A is a constant. Find the most probable distance of the electron from the nucleus.
(b) The complete 2p wave function for a particular value of ml is
1
r − r / 2 a0
ψ ( r ,θ , φ ) =
e
cos θ
1/ 2
3/ 2
(4π ) (2a0 ) a0
Describe the angular part of the electron probability density. Consider both the θ and
φ dependences. Include in your discussion a sketch of the angular part of the
probability density.
5. The radial part of the 3d wave function of atomic hydrogen is
R(r ) = Ca0−7 / 2 r 2 e − r / 3a0
where C = (2 / 81) 2 /15 = 9.016 ×10−3 .
(a) Find the locations of the maxima and minima of the radial probability density.
Sketch the radial probability density as a function of r.
(b) Independent of the angular coordinates, what is the probability to find the electron
in the region between r = a0 and r = 1.01a0?
6. (a) The radial part of the 2p (l = 1) wave function of hydrogen is
R(r ) = Aa0−5/ 2 re − r / 2 a0
where A = 1/ 24 = 0.2041. What is the probability to find the electron in the
entire region of the thin spherical shell between 0.99a0 and 1.01a0?
(b) The angular part of this wave function is Θ(θ ) = B sin θ , where B = 12 3 .
Where would you expect the probability to find the electron to be larger: closer to
the z axis or closer to the xy plane? Explain your answer. (θ is the polar angle
between the z axis and a line connecting the electron’s volume element to the
origin.)
Answers
1. 2.16
2. (a) 4a0 (b) (2,1,±1,±1/2), (2,1,0,±1/2)
3. (a) min: 0,∞; max: 4a0 (b) l = 0 (ml = 0), l = 1 (ml = 0,±1)
4. (a) 4a0 (b) Independent of φ; max for θ = 0 and π, zero for θ = π/2
5. (a) minima at 0,∞; maximum at 9a0 (b) 4.17 × 10-7
6. (a) 3.07 × 10-4 (b) near xy plane
155
Problem Solutions
1. ψ ( x) = Axe − bx gives dψ / dx = Ae − bx − bAxe − bx and d 2ψ / dx 2 = −2bAe − bx + b 2 Axe − bx .
Then substituting into Equation 7.2 we have
−
2
2m
(−2 Abe
− bx
+ b Axe
2
− bx
)−
e2
4πε 0 x
Axe −bx = EAxe −bx
Canceling common factors gives
2 2
⎛ 2b
⎛ 2b 2
⎞
b
b
e2
e2 ⎞
−
= Ex or ⎜
−
+
− E⎟ = 0
x−
x
⎟
⎜−
m
2m
4πε 0
⎝ 2m
⎠
⎝ m 4πε 0 ⎠
2
For this expression to equal zero for all x, both terms in parentheses must be zero. Thus
2
b
e2
=
m 4πε 0
or b =
me 2
4πε 0
2
2 2
1
=
a0
and
b
me 4
=−
E=−
2m
32π 2ε 02
2
2
2. The probability density is P ( x) = ψ ( x) = A2 x 2 e −2bx . To find the maximum, we set the
first derivative equal to zero:
dP
= 2 A2 xe−2bx − 2bA2 x 2 e −2bx = 0
dx
This has solutions at x = 0, x = ∞, and x = 1/b = a0. The first two give minima and the
third gives the maximum.
3. The probability to find the electron in a small interval is P ( x)dx = A2 x 2 e −2bx dx .
Substituting the values of A and b, and evaluating the resulting expression for x = a0 and
dx = 0.02a0 (appropriate to the interval from x = 0.99a0 to x = 1.01a0), we obtain
P ( x)dx =
4 2 −2 x / a0
4
xe
dx = 3 a02 e −2 (0.02a0 ) = 0.0108
3
a0
a0
4. (a) L = l (l + 1) = (3)(4) = 12
(b) There are 2l + 1 = 7 possible z components: Lz = ml = +3 , +2 , + ,0, − , −2 , −3 .
(c) cos θ = ml / l (l + 1) = ml / 12
156
ml = +3
θ = cos−1 3/ 12 = 30°
ml = +2
θ = cos−1 2 / 12 = 55°
ml = +1
θ = cos−1 1/ 12 = 73°
ml = 0
θ = cos−1 0 = 90°
ml = −1
θ = cos−1 ( −1/ 12) = 107°
ml = −2
θ = cos−1 ( −2 / 12) = 125°
ml = −3
θ = cos−1 ( −3/ 12) = 150°
5. For l = 2, ml = +2, +1, 0, −1, −2. With cos θ = ml / l (l + 1) = ml / 6 , we have
ml = +2
θ = cos −1 2 / 6 = 35°
ml = +1
θ = cos−1 1/ 6 = 66°
ml = 0
θ = cos −1 0 = 90°
ml = −1
θ = cos−1 ( −1/ 6) = 114°
ml = −2
θ = cos−1 ( −2 / 6) = 145°
6. l = 0: (4, 0, 0)
l = 1: (4, 1, +1), (4, 1, 0), (4, 1, −1)
l = 2: (4, 2, +2), (4, 2, +1), (4, 2, 0), (4, 2, −1), (4, 2, −2)
l = 3: (4, 3, +3), (4, 3, +2), (4, 3, +1), (4, 3, 0), (4, 3, −1), (4, 3, −2), (4, 3, −3)
7. (a) lmax = n – 1 = 5 so l = 0, 1, 2, 3, 4, 5 for n = 6.
(b) ml = +6, +5, +4, +3, +2, +1, 0, −1, −2, −3, −4, −5, −6
(c) n ≥ l + 1 = 5 for l = 4, so the smallest possible n is 5.
(d) For ml = 4, l ≥ 4 so the smallest possible l is 4.
8. The normalization integral for the (1, 0, 0) wave function is
∫
∞
0
π
2π
0
0
2
∞
r 2 dr ∫ sin θ dθ ∫ dφ ψ 1,0,0 ( r, θ , φ ) = ∫ 4a0−3e −2 r / a0 r 2dr ∫
0
157
π
1
0 2
sin θ dθ ∫
2π
0
1
2π
dφ
∞
= 4a0−3 ∫ e −2 r / a0 r 2 dr =
0
4
2!
=1
3
a0 (2 / a0 )3
∞
The last integral is evaluated using the standard form ∫ x n e − ax dx = n !/ a n +1 .
0
The normalization integral for the (2, 0, 0) wave function is
∫
∞
0
π
2π
0
0
2
r 2 dr ∫ sin θ dθ ∫ dφ ψ 2,0,0 ( r,θ , φ ) = ∫
∞
1
0 8
a0−3 (2 − r / a0 ) 2 e − r / a0 r 2dr ∫
π
1
0 2
sin θ dθ ∫
2π
0
1
2π
dφ
∞
⎛
⎡
r3 r4 ⎞
2!
4
3!
1
4! ⎤ 1
= 18 a0−3 ∫ e − r / a0 ⎜ 4r 2 − 4 + 2 ⎟ dr = 18 a0−3 ⎢ 4
−
+ 2
= 8 (8 − 24 + 24) = 1
3
4
5⎥
0
a
a
(1/
a
)
a
(1/
a
)
a
(1/
a
)
0
0 ⎠
0
0
0
0
0
⎝
⎣
⎦
9. With ψ 2,0,0 ( r , θ , φ ) =
1
4π
1 ⎛
r ⎞
∂ψ
∂ψ
= 0 and
= 0.
2 − ⎟ e − r / 2 a0 , we then have
⎜
3
∂θ
∂φ
a0 ⎠
8a0 ⎝
⎡ 1 − r / 2 a0
⎤
⎛ 2
∂ψ
1
1 ⎛
r ⎞
1
r ⎞ − r / 2 a0
=
− e
−
2 − ⎟ e − r / 2 a0 ⎥ =
⎢
⎜
⎜− + 2 ⎟e
3
3
∂r
2 a0 ⎝
a0 ⎠
32π a0 ⎣ a0
32π a0 ⎝ a0 2a0 ⎠
⎦
∂ 2ψ
1
=
2
∂r
32π a03
⎡ 1 − r / 2 a0
⎤
1
1 ⎛
r ⎞
1
+ 2 e − r / 2 a0 + 2 ⎜ 2 − ⎟ e − r / 2 a0 ⎥ =
⎢ 2e
2 a0
4 a0 ⎝
a0 ⎠
32π a03
⎣ 2 a0
⎦
⎛ 3
r ⎞ − r / 2 a0
⎜ 2 − 3 ⎟e
⎝ 2 a0 4 a 0 ⎠
Substituting into the left side of Equation 7.10, we have
⎡
1
−
⎢
2m ⎢ 32π a03
⎣
2
=
=
=
⎛ 3
⎛ 2
⎛
r ⎞ − r / 2 a0 2
1
r ⎞ − r / 2 a0 ⎤
e2
1
r ⎞ − r / 2 a0
+
⎥−
⎜ 2 − 3 ⎟e
⎜− + 2 ⎟e
⎜2 − ⎟e
3
3
r 32π a0 ⎝ a0 2a0 ⎠
4πε 0 r 32π a0 ⎝
a0 ⎠
⎝ 2a0 4a0 ⎠
⎦⎥
2
⎡
⎛ 3
r
4
1 ⎞
e2
e2 ⎤
e − r / 2 a0 ⎢ −
−
−
+
−
+
⎥
⎜ 2
3
2 ⎟
32π a03
⎣ 2m ⎝ 2a0 4a0 ra0 a0 ⎠ 2πε 0 r 4πε 0a0 ⎦
1
1
32π a03
1
32π a03
e − r / 2 a0
r
2 2 1⎞
e2 ⎛ 5
+ 2+ − + ⎟
⎜−
4πε 0 ⎝ 4a0 8a0 r r a0 ⎠
e − r / 2 a0
e2 ⎛ 1
r ⎞
e2 ⎛ 1 ⎞
−
+
=
⎜
⎟
⎜−
⎟ψ 2,0,0 ( r, θ , φ ) = Eψ 2,0,0 ( r ,θ , φ )
4πε 0 ⎝ 4a0 8a02 ⎠ 4πε 0 ⎝ 8a0 ⎠
e2 ⎛ 1 ⎞
e2 ⎛
me 2
with E =
⎜−
⎟=
⎜−
4πε 0 ⎝ 8a0 ⎠ 4πε 0 ⎝ 32πε 0
defined in Equation 7.13.
Starting with ψ 2,1,0 ( r, θ , φ ) =
1
32π a
5
0
⎞ 1⎛
me 4
= ⎜−
2 ⎟
2 2
⎠ 4 ⎝ 32π ε 0
re − r / 2 a0 cos θ ,
158
2
⎞
⎟ , which is the energy E2 as
⎠
1
∂ψ
=
∂r
32π a05
⎛ − r / 2 a0
r − r / 2 a0 ⎞
e
−
⎜e
⎟ cos θ
2 a0
⎝
⎠
1
∂ 2ψ
=
2
∂r
32π a05
⎛ 1 − r / 2 a0
⎞
1 − r / 2 a0
r
e
e
−
+ 2 e − r / 2 a0 ⎟ cos θ
⎜−
2 a0
4 a0
⎝ 2 a0
⎠
1
∂ψ
re − r / 2 a0 ( − sin θ )
=
5
∂θ
32π a0
∂
∂θ
1
∂ψ ⎞
⎛
re − r / 2 a0 (2sin θ cos θ )
⎜ sin θ
⎟=−
5
θ
∂
⎝
⎠
32π a0
Equation 7.10 then gives
2
⎛
⎡ 1
r
2⎛
r ⎞ 2⎤
e2 ⎞
e − r / 2 a0 ⎜ −
− + 2 + ⎜1 −
−
−
⎢
⎥
⎜ 2m a0 4a0 r ⎝ 2a0 ⎟⎠ r
⎟⎟
32π a05
⎣
⎦ 4πε 0 ⎠
⎝
cos θ
=
10.
e2
4πε 0
⎛ 1
1
1 1⎞
e2 ⎛ 1 ⎞
−
+ − ⎟=
⎜−
⎟ψ 2,1,0 ( r, θ , φ ) = E2ψ 2,1,0 ( r, θ , φ )
⎝ 2 r 8a0 2r r ⎠ 4πε 0 ⎝ 8a0 ⎠
ψ 2,1,0 ( r, θ , φ ) ⎜
1
∂ψ
=
3
∂r
π a0
π a03
Substituting into Equation 7.10, we have
With ψ 1,0,0 ( r , θ , φ ) =
1
e − r / a0 ,
⎛ 1 ⎞ − r / a0
1
∂ 2ψ
e
and
−
=
⎜
⎟
2
∂r
π a03
⎝ a0 ⎠
⎛ 1 ⎞ − r / a0
.
⎜ 2 ⎟e
⎝ a0 ⎠
2
⎡
⎛ 1 − r / a0
2 − r / a0 ⎞
e 2 − r / a0 ⎤
e
e
e
−
−
−
⎢
⎥
⎜ 2
⎟
a0 r
π a03 ⎣ 2m ⎝ a0
⎠ 4πε 0 r
⎦
1
=
1
π a03
with E = −
e − r / a0
e2 ⎛ 1
1 1⎞
1 e2
ψ 1,0,0 ( r, θ , φ ) = Eψ 1,0,0 ( r, θ , φ )
−
+
−
=
−
⎜
⎟
4πε 0 ⎝ 2a0 r r ⎠
2a0 4πε 0
1 e2
1 e 2 me 2
me 4
=−
=
−
2a0 4πε 0
2 4πε 0 4πε 0 2
32π 2ε 02
2
which is E1 from Equation 7.13.
11. (a) For n = 2, l = 1, ml = 0, the probability to find the electron in a volume element dV is
given by Equation 7.16:
1 r 2 − r / a0 ⎛ 3
⎞
ψ 2,1,0 (r ,θ , φ dV =
e
cos 2 θ ⎟ r 2 sin θ dr dθ dφ
⎜
3
2
24a0 a0
⎝ 4π
⎠
2
and for ml = ±1,
159
2
ψ 2,1,±1 (r , θ , φ dV =
1 r 2 − r / a0 ⎛ 3
⎞ 2
2
e
⎜ sin θ ⎟ r sin θ dr dθ dφ
3
2
24a0 a0
⎝ 8π
⎠
For θ = 0, both probabilities are zero due to the sin θ terms. (b) For θ = 90°, the 2,1,0
probability is zero due to the cos θ term. With dr = 0.02a0, dθ = 0.11° = 0.00192 rad, and
dφ = 0.25° = 0.00436 rad, the 2,1,±1 probability is
(0.50a0 ) 2 −0.5 a0 / a0 ⎛ 3
⎞
2
2
ψ 2,1,±1 (r , θ , φ dV =
e
⎜ sin 90° ⎟ (0.50a0 ) (sin 90°)
5
24a0
⎝ 8π
⎠
× ( 0.02a0 )(0.00192 rad)(0.00436 rad) = 3.2 ×10 −11
2
(c) Because the probability density associated with any particular state in hydrogen is
always independent of φ , the 2,1,0 probability is again zero and the 2,1,±1 probability is
again 3.2 × 10−11. (d) The only change in the 2,1,±1 probability is to replace sin 90° with
sin 45° in three locations, so the new probability is (3.2 × 10−11 )( 12 2)3 = 1.1× 10−11 . For
the 2,1,0 probability, the angular factors are the same because cos 45° = sin 45°. The
only change comes about because of the change from 3/8π to 3/4π in the Θ(θ) term, so
the 2,1,0 probability is 2.2 × 10−11.
12.
2
For n = 1, l = 0 we have P( r ) = r 2 R1,0 ( r ) = 4 r 2e −2 r / a0 / a03 . To find the maximum, we set
dP/dr to zero:
⎤ 8r
⎛2⎞
⎛
dP 4 ⎡ −2 r / a0
r ⎞
= 3 ⎢ 2 re
− r 2 ⎜ ⎟ e −2 r / a0 ⎥ = 3 e −2 r / a0 ⎜ 1 − ⎟ = 0
dr a0 ⎣
⎝ a0 ⎠
⎝ a0 ⎠
⎦ a0
There are three solutions to this equation: r = 0, r = ∞, r = a0. The first two solutions
correspond to minima of P(r); only the solution at r = a0 gives a maximum.
2
1 ⎛
r ⎞ − r / a0
1 ⎛ 2 4 r 3 r 4 ⎞ − r / a0
13. For n = 2, l = 0, P( r ) = r R2,0 ( r ) = r
2
e
−
=
+ ⎟e
⎜
⎟
⎜ 4r −
8a03 ⎝
a0 ⎠
8a03 ⎝
a0 a02 ⎠
Setting dP/dr to zero, we have
2
2
2
1
16r 8r 2 r 3 ⎞
1
r ⎞⎛
6r r 2 ⎞
− r / a0 ⎛
− r / a0 ⎛
−
+
−
=
−
−
+ 2⎟=0
re
8
re
2
4
⎜
⎜
⎟⎜
2
3 ⎟
3
8a03
a
a
a
8
a
a
a
a0 ⎠
0
0
0 ⎠
0
0 ⎠⎝
0
⎝
⎝
The five solutions are: r = 0, r = ∞, r = 2a0 , r = (3 ± 5)a0 . The first three solutions give
minima and the last two give maxima.
160
14.
2
For n = 2, l = 1, we have P( r ) = r 2 R2,1 ( r ) = r 2
1 r 2 − r / a0
. The total probability
e
24a03 a02
between r = a0 and r = 2a0 is
P ( a0 : 2 a0 ) = ∫
2 a0
a0
P( r ) dr =
1 2 a0 4 − r / a0
re
dr
24a05 ∫a0
We can use Equation 7.4 to evaluate this integral. The result is
P ( a0 : 2 a0 ) =
2
2 a0
1
⎡ − a0e − r / a0 ( r 4 + 4a0 r 3 + 12a02 r 2 + 24a03r + 24) ⎤⎦ = 0.0490
5 ⎣
a0
24a0
4 −2
e (0.01a0 ) = 0.0054
a03
15.
P( r )dr = r 2 R1,0 ( r ) dr = (1.00a0 ) 2
16.
The angular probability density is P (θ , φ ) = 815π sin 2 θ cos 2 θ . To find the locations of the
maxima and minima, we set the derivative equal to zero:
dP 15
15
=
(2sin θ cos 3 θ − 2sin 3 θ cos θ ) =
(sin θ )(cos θ )(cos 2 θ − sin 2 θ ) = 0
dθ 8π
4π
The three angular terms in parentheses give three sets of solutions: θ = 0,π; θ = π/2; and θ
= π/4,3π/4. By checking the second derivative, we find that the first two give minima
(the second derivative is positive) and the third gives maxima (negative second
derivative). The angular probability density thus starts at zero along the positive z
direction, rises to a maximum at θ = 45°, falls again to zero in the xy plane (θ = 90°),
rises again to a maximum at θ = 135°, and finally falls again to zero on the negative z
axis.
17.
The angular probability density is P (θ , φ ) = 165π (3cos 2 θ − 1) 2 . To find the locations of the
maxima and minima, we set the derivative equal to zero:
dP 5
15
=
(3cos 2 θ − 1)(−6sin θ cos θ ) = −
(sin θ )(cos θ )(3cos 2 θ − 1)
dθ 8π
4π
The three angular terms in parentheses give three sets of solutions: θ = 0,π; θ = π/2; and
θ = cos −1 (±1/ 3) = 0.955, 2.186 . The first two give maxima and the third gives minima.
The angular probability density is a maximum on the positive z axis, falls to zero at θ =
55°, rises again to a maximum in the xy plane (θ = 90°), falls to zero at θ = 125°, and
rises to a maximum on the negative z axis.
161
18.
(a) degeneracy = 2n2 = 2(5)2 = 50
(b) For each value of l, the degeneracy is 2(2l+1).
l = 0:
l = 1:
l = 2:
l = 3:
l = 4:
total:
19.
2(0+1) = 2
2(2+1) = 6
2(4+1) = 10
2(6+1) = 14
2(8+1) = 18
50
n −1
n −1
n −1
l =0
l =0
l =0
∑ 2(2l + 1) = 4∑ l + 2∑1 = 4
n( n − 1)
+ 2n = 2n 2
2
20. (a) l exceeds the maximum permitted value (n – 1).
(b) ml exceeds the maximum permitted value (l)
(c) ms can be only +1/2 or -1/2
(d) negative values of l are not permitted
21.
The selection rule is Δl = ±1, so the 4p state can make transitions to any lower s state (Δl
= −1) or d state (Δl = +1). The possible transitions are then:
4p → 3s, 4p → 2s, 4p → 1s, and 4p → 3d
22. (a) The transitions that change l by one unit are
n=5
n=4
n=3
s
p
d
n=2
n=1
(b) Starting instead with 5d, the permitted transitions are
162
f
g
n=5
n=4
n=3
s
p
d
f
g
n=2
n=1
23. (a) 7s, 7p, 7d, 7f, 7g, 7h, 7i (b) 6p, 6f, 5p, 5f, 4p, 4f, 3p, 2p
24.
(a)
ΔE
3d
mli
+2
+1
0
−1
−2
mlf
+1
0
−1
2p
(b) Transitions shown with dashed lines violate the Δml = ±1 selection rule.
(c) The energy of the initial state is Ei = E3d + mli ΔE and the energy of the final state
is Ef = E2 p + mlf ΔE (where ΔE is the spacing between adjacent states). The transition
energies can be found from the energy difference:
Ei − Ef = ( E3d − E2 p ) + ( mli − mlf )ΔE = ( E3d − E2 p ) + Δml ΔE
There are only three permitted values of Δml (0, ±1), so there are only three possible
values of the energy difference: E3d − E2 p , E3d − E2 p + ΔE , E3d − E2 p + ΔE .
163
25.
(a) In the absence of a magnetic field, the 3d to 2p energy difference is
⎛1 1⎞
E = ( −13.6057 eV) ⎜ 2 − 2 ⎟ = 1.88968 eV
⎝3 2 ⎠
and the wavelength is
λ=
hc 1239.842 eV ⋅ nm
=
= 656.112 nm
E
1.88968 eV
The magnetic field gives a change in wavelength of
Δλ =
λ2
hc
ΔE =
(656.112 nm) 2
(5.79 × 10−5 eV/T)(3.50 T) = 0.0703 nm
1239.842 eV ⋅ nm
The wavelengths of the three normal Zeeman components are then 656.112 nm, 656.112
nm + 0.070 nm = 656.182 nm, and 656.112 nm − 0.070 nm = 656.042 nm.
26.
The energy of the 2p to 1s Lyman transition is
⎛ 1 1⎞
E = (−13.60570 eV) ⎜ 2 − 2 ⎟ = 10.20428 eV
⎝2 1 ⎠
and its wavelength (in the absence of fine structure) is
λ=
hc 1239.842 eV ⋅ nm
=
= 121.5022 eV
E
10.20428 eV
With the fine structure energy splitting of 4.5 × 10-5 eV, the wavelength splitting is
λ2
(121.5 nm) 2
Δλ =
ΔE =
(4.5 × 10−5 eV) = 0.00054 nm
hc
1240 eV ⋅ nm
The fine structure splits one level up by 0.5ΔE and the other down by the same amount,
so the wavelengths are
λ + 12 Δλ = 121.5024 nm
27.
and
λ − 12 Δλ = 121.5019 nm
The 3d fine structure splitting is roughly
ΔE = mc 2α 4 315 = 6.0 × 10−6 eV
164
Assuming that the parallel and antiparallel states are affected equally by this splitting, the
3d fine structure levels are each shifted upward and downward by half this amount so
their energies are −1.51 eV ± 3.0 × 10-6 eV, while the 2p fine structure levels are each
shifted upward and downward by half of the 2p fine structure splitting (4.5 × 10-5 eV) so
their energies are -3.40 eV ± 2.25 × 10-5 eV. The possible energy differences are then
1.89 eV ± 2.55 × 10−5 eV
and
1.89 eV ± 1.95 × 10−5 eV
The wavelength differences are
Δλ =
Δλ =
λ2
hc
λ2
hc
ΔE =
(656 nm) 2
(2.55 × 10−5 eV) = 0.00885 nm
1240 eV ⋅ nm
ΔE =
(656 nm) 2
(1.95 × 10−5 eV) = 0.00677 nm
1240 eV ⋅ nm
We might therefore observe as many as 4 component wavelengths: 656.1123 nm ±
0.0089 nm and 656.1123 ± 0.0068 nm.
28.
With ψ ( x) = A( x + cx 2 )e − bx , we find dψ / dx = A(1 + 2cx)e− bc − bA( x + cx 2 )e− bx and
d 2ψ / dx 2 = 2cAe− bx − 2bA(1 + 2cx)e− bx + b 2 A( x + cx 2 )e− bx . Substituting into Equation 7.2
and canceling the common factor Ae − bx , we obtain
−
2
2m
[2c − 2b(1 + 2cx) + b ( x + cx )] −
2
2
e2
4πε 0
(1 + cx) = E ( x + cx 2 )
or
2
2 2
⎛ 2c
⎛ 2 2bc
⎞ 2 ⎛ 2b 2 c
⎞
b
e2 ⎞
b
e2c
−
+
−
+
−
−
−
− Ec ⎟ = 0
x
E
⎜
⎟
⎜
⎟+ x ⎜−
m 4πε 0 ⎠
2m 4πε 0
⎝ 2m
⎠
⎝ m
⎝ m
⎠
For this expression to be true for any x, all three expressions in parentheses must equal
zero. Solving the third for E and substituting into the second, we find
b = me 2 / 8πε 0 2 = 1/ 2a0 . Substituting this result into the first expression, we
obtain c = −me 2 / 8πε 0 = −1/ 2a0 . The third expression then gives
E = − 2b 2 / 2m = − me 4 /128π 2ε 02 2 = 14 (− me 4 / 32π 2ε 02 2 ) , which is the energy of the first
excited state in the Bohr model. To find the value of A, we must normalize the wave
function:
∫
∞
0
∞
∞
ψ ( x) dx = A2 ∫ ( x − x 2 / 2a0 ) 2 e− x / a dx = A2 ∫ ( x 2 − x 3 / a0 + x 4 / 4a02 )e − x / a dx = 1
2
0
0
0
165
0
Evaluating the integrals with Equation 7.3, we find
⎛ 2
1
3!
1
4! ⎞
A2 ⎜
−
+ 2
=1
3
4
5 ⎟
⎝ (1/ a0 ) a0 (1/ a0 ) 4a0 (1/ a0 ) ⎠
or
A=
1
2a03
2
1 ⎛
r ⎞
2 − ⎟ e − r / a0 . The probability to
29. For n = 2, l = 0, we have P( r ) = r R2,0 ( r ) = r
3 ⎜
8a0 ⎝
a0 ⎠
find the electron beyond r = 5a0 is
2
2
∞
P(5a0 : ∞) = ∫ P( r ) dr =
5 a0
2
1 ∞ ⎛ 2 4 r 3 r 4 ⎞ − r / a0
1 ∞
+ 2 ⎟e
4r −
dr = ∫ (4 x 2 − 4 x 3 + x 4 )e − x dx
3 ∫5 a ⎜
8a0 0 ⎝
a0 a0 ⎠
8 5
with x = r / a0 . The integrals can be evaluated using Equation 7.4. The result of the
integration is
P(5a0 : ∞) =
1
( 4 × 0.2493 − 4 × 1.5902 + 10.5718) = 0.651
8
1 r 2 − r / a0
. The probability is
e
For n = 2, l = 1, we have P( r ) = r R2,1 ( r ) = r
24a03 a02
2
2
P(5a0 : ∞) =
2
1 ∞ 4 − r / a0
1 ∞ 4 −x
re
dr =
x e dx = 0.440
5 ∫5 a
24a0 0
24 ∫5
Thus the n = 2, l = 0 electron is more likely to be found beyond r = a0 than the n = 2, l = 1
electron.
∞
∞
0
0
2
rav = ∫ rP ( r )dr = ∫ r 3 R1,0 ( r ) dr =
30.
31. 2s level:
=
∞
∞
0
0
rav = ∫ rP ( r ) dr = ∫
4 ∞ 3 −2 r / a0
4
3!
3
re
dr = 3
= a0
3 ∫0
4
a0
a0 (2 / a0 )
2
2
1 ∞ ⎛
r ⎞
r R2,0 ( r ) dr = 3 ∫ r 3 ⎜ 2 − ⎟ e − r / a0 dr
8a0 0 ⎝
a0 ⎠
2
3
1 ∞⎛ 3
r 4 r 5 ⎞ − r / a0
1 ⎛
3!
4
4!
1
5! ⎞
−
+ 2 ⎟e
−
+ 2
4
r
4
dr = 3 ⎜ 4
⎟ = 6 a0
3 ∫0 ⎜
4
5
8a0 ⎝
a0 a0 ⎠
8a0 ⎝ (1/ a0 ) a0 (1/ a0 ) a0 (1/ a0 )6 ⎠
2p level:
∞
∞
0
0
2
rav = ∫ rP( r ) dr = ∫ r 3 R2,1 ( r ) dr =
166
1 ∞ 5 − r / a0
1
5!
re
dr =
= 5a0
5 ∫0
5
24a0
24a0 (1/ a0 )6
32.
∞
∞⎛
2
e2 ⎞ 2
e 2 4 ∞ −2 r / a0
=
−
U av = ∫ U ( r ) P ( r ) dr = ∫ ⎜ −
r
R
(
r
)
dr
re
dr
⎟
1,0
0
0
4πε 0 a03 ∫0
⎝ 4πε 0 r ⎠
e2
4
1
e2
=−
=−
4πε 0 a03 (2 / a0 ) 2
4πε 0a0
33.
Assuming a beam of silver atoms (m = 108 u) and estimating the magnetic moment of the
atom to be about one Bohr magneton, we have
Fz = μ z
dB
= (9.27 × 10−24 J/T)(10 T/m) = 9.3 × 10−23 N
dz
The acceleration in the region of the field is
Fz
9.3 × 10−23 N
az =
=
= 518 m/s2
−27
m (108 u)(1.66 × 10 kg/u)
For an oven temperature of 1000 K, the kinetic energy of the atoms is
K = 23 kT = 23 (1.38 × 10−23 J/K)(1000 K) = 2.1 × 10−20 J
and the speed of these atoms is
2K
2(2.1 × 10−20 J)
v=
=
= 480 kg/s
m
(108 u)(1.66 × 10−27 kg/u)
The time for an atom to travel 1 meter through the magnetic field region is
t=
1m
= 2.1 × 10−3 s
480 m/s
Let the atoms enter the field with z = 0 and vz = 0. Then after passing through the 1meter field region,
z = 12 a z t 2 = 12 (518 m/s2 )(2.1 × 10−3 s)2 = 1.1 mm
v z = a z t = (518 m/s2 )(2.1 × 10−3 s) = 1.1 m/s
After leaving the region of the field there is no longer an acceleration, but the z
component of the velocity causes an additional displacement in the z direction. The
horizontal velocity is unchanged, to the atom takes 2.1 × 10−3 s to pass through the fieldfree region, and the additional displacement is
167
z = v z t = (1.1 m/s)(2.1 × 10−3 s) = 2.2 mm
The total displacement is then 1.1 mm + 2.2 mm = 3.3 mm. We would thus expect to see
images on the screen separated by a few mm.
34.
For 1s:
∞
0
0
( r )av = ∫
−1
For 2s:
=
∞
2
( r −1 )av = ∫ r −1P ( r ) dr = ∫ r R1,0 ( r ) dr =
∞
0
4 ∞ −2 r / a0
4
1
1
re
dr = 3
=
3 ∫0
2
a0
a0 (2 / a0 )
a0
2
1 ∞ ⎛
r ⎞
r R2,0 ( r ) dr = 3 ∫ r ⎜ 2 − ⎟ e − r / a0 dr
8a0 0 ⎝
a0 ⎠
2
1 ∞⎛
r 2 r 3 ⎞ − r / a0
1 ⎛
1
4
2
1
3! ⎞
1
−
+ 2 ⎟e
−
+ 2
=
4
r
4
dr = 3 ⎜ 4
3 ∫0 ⎜
2
3
4 ⎟
8a0 ⎝
a 0 a0 ⎠
8a0 ⎝ (1/ a0 ) a0 (1/ a0 ) a0 (1/ a0 ) ⎠ 4a0
For 2p:
( r )av = ∫
−1
∞
0
1 ∞ r 2 − r / a0
1
3!
1
=
r R2,1 ( r ) dr =
r 2e
dr =
3 ∫0
5
4
24a0
a0
24a0 (1/ a0 )
4 a0
2
168
Chapter 8
The theme of this chapter is to extend our simple model for one-electron atoms to
help us understand the properties of atoms with more than one electron. This attempt can
meet with only limited success, but it is necessary to avoid delving into many-body
theory or formal perturbation methods. As a result, this chapter is built mostly on
conceptual rather than mathematical arguments.
Supplemental Materials
Tabulations of atomic properties can be found in:
C. Kittel, Introduction to Solid State Physics 8th ed. (Wiley, 2004).
Handbook of Chemistry and Physics (CRC Press, published annually).
National Institute of Standards and Technology (http://www.nist.gov/pml/data/).
J. G. Speight, Lange’s Handbook of Chemistry, 16th ed. (McGraw-Hill, 2004).
Suggestions for Additional Reading
Some additional basic features of the vector representation of atomic states are in:
K. W. Ford, Classical and Modern Physics (Xerox College Publishing, 1974), Vol. 3,
Chapt. 24.
More advanced and detailed works on atomic structure are:
C. J. Foot, Atomic Physics (Oxford University Press, 2005).
H. G. Kuhn, Atomic Spectra (Academic Press, 1969).
H. Semat and J. R. Albright, Introduction to Atomic and Nuclear Physics (Holt,
Rinehart and Winston, 1972).
J. C. Willmott, Atomic Physics (Wiley, 1975).
Three classic works that include some introductory and advanced material covering
almost all aspects of atomic structure:
A. C. Candler, Atomic Spectra and the Vector Model (Cambridge University Press, 1937).
G. Herzberg, Atomic Spectra and Atomic Structure (Prentice-Hall, 1937).
H. E. White, Introduction to Atomic Spectra (McGraw-Hill, 1934).
Many reference works, both popular and technical, are available about lasers. A good
introductory work is:
B. A. Lengyel, Lasers (Wiley, 1971).
Two popular articles by the 1981 Nobel prize recipient (for his work with lasers):
A. W. Schawlow, “Optical Masers,” Scientific American 204, 52 (June 1961).
A. W. Schawlow, “Laser Light,” Scientific American 219, 120 (September 1968).
169
Materials for Active Engagement in the Classroom
A. Reading Quizzes
1. The Pauli principle states that
(1) Atoms emit photons when electrons change from one quantum state to another.
(2) No two electrons in an atom can have the same set of quantum numbers.
(3) Electrons in an atom are forbidden from occupying certain orbits.
(4) An atom with Z positive charges in its nucleus cannot hold more than Z electrons.
2. Which statement best describes the emission of discrete X rays in atoms?
(1) The energies of the X rays depend on the quantum numbers of the atomic
states but not on the atomic number of the atom.
(2) The energies of the X rays depend strongly on the orbital angular momentum
quantum number.
(3) X rays are emitted when one of the outer electrons returns to its original state
after being promoted to a higher state.
(4) X rays are emitted when one of the inner electrons jumps from one state to a
state where a vacancy has occurred.
3. X rays are emitted:
(1) When one of the outer electrons jumps from an excited state to its original state.
(2) Only from atoms of elements with small atomic number Z.
(3) Only from atoms of elements with large atomic number Z.
(4) After one of the inner electrons of an atom is removed.
4. In an excited state, a certain atom has the configuration 3p13d1. What range of values
is possible for the total orbital angular momentum L of the two electrons?
(1) 0,1,2
(2) 1,2,3,4
(3) 1,2,3
(4) 1,2
Answers
1. 2
2. 4
3. 4
4. 3
B. Conceptual or Discussion Questions
1. (a) In what period (horizontal row) of the periodic table would we expect to find the
element with Z = 167?
(b) What would be the most probable electronic configuration of the element with Z = 167?
(c) What would be the most likely atomic number of the next inert gas after Z = 118?
(1) 136
(2) 150
(3) 168
(4) 180
2. Comparing elements from Ne (Z = 10) to Ca (Z = 20), approximately how would you
expect the energy necessary to remove a 1s electron to vary with Z?
(3) Linearly with Z
(4) Like Z2
(1) Independent of Z
(2) Like Z1/2
Answers
1. (a) 8 (b) 8p5 (c) 3
2. 4
170
Sample Exam Questions
A. Multiple Choice
1. The Kα wavelength of an element with atomic number Z = 17 is 8. What is the
atomic number of an element with a Kα wavelength of 48?
(a) 3 (b) 7 (c) 9 (d) 33 (e) 65
2. In the ground state of a sodium atom, which has 11 electrons, the valence electron
goes into the 3s state rather than the 3p state because:
(a) the 3s state is lower in energy than the 3p state.
(b) the 3p state is already filled with electrons.
(c) the 3s orbit occupies less space than the 3p orbit.
(d) the 3s orbit is always closer to the nucleus than the 3p orbit.
3. If electrons did not have spin (intrinsic angular momentum), how many elements
would occupy the second row in the periodic table?
(a) 3
(b) 4
4. If the Kα (2 → 1) X-ray energy in a certain element is E, what is the Kβ (3 → 1)
energy in that element?
(a) 1.2E
(b) 2.25E
(c) 9E
(d) 1.5E
5. Put the energies of the Kα, Kβ, Lα X-rays from an element in order of increasing
energy (from smallest to largest).
(b) Kα, Kβ, Lα
(c) Kα, Lα, Kβ
(d) Lα, Kβ, Kα
(a) Lα, Kα, Kβ
6. Consider two elements with atomic numbers Z and 2Z. How do the wavelengths of
the Kα X-rays compare in the two elements?
(a) λ(Z)/λ(2Z) = 4
(b) λ(Z)/λ(2Z) > 4
(c) λ(Z)/λ(2Z) < 4
7. Oxygen has the electronic configuration 1s22s22p4. In the ground state, the total ms of
all 8 of the electrons has the largest possible value consistent with the Pauli principle.
What is this value?
(a) 1
(b) 2
(c) 3
(d) 4
8. The sodium atom (Z = 11) has a single valence electron in the 3s subshell. The
properties of the electron can be analyzed as if the electric force acting on that
electron were due to an effective charge of about
(a) +e
(b) –e
(c) +5e
(d) +10e
9. Consider an atom of oxygen, which has 4 electrons in the 2p (l = 1) subshell. If we
add the z components of the intrinsic spins of these 4 electrons, what is the maximum
total z component of the intrinsic spin that is consistent with the Pauli principle?
(b) + 32
(c) +
(d) + 12
(e) 0
(a) +2
171
(c) 6
Answers
1. c
2. a
3. b
4. a
5. a
6. b
7. a
8. a
9. c
B. Conceptual
1. The lanthanide elements (Z = 57 to Z = 70) have the outer electron configuration
6s24f k where k = 1 to 14. Based on this configuration, explain why:
(a) the atomic radius is very nearly constant over all 14 elements.
(b) these elements have very similar chemical properties.
2. Consider the ionization energy (the least energy needed to remove an electron) from
the ground state of a neutral atom of Li (Z = 3). Compared with the ionization energy
of the ground state of H, is the ionization energy of Li much larger, much smaller, or
about the same? EXPLAIN YOUR ANSWER.
3. The Lα x ray occurs when an electron in the n = 3 atomic level jumps to a vacancy in
the n = 2 atomic level. Suppose you are doing an experiment to measure the Lα x ray
frequencies in a variety of different elements with atomic numbers Z greater than 20.
You graph your data in the form of (frequency)1/2 on the y axis against the atomic
number Z on the x axis. You find that the data fall very nicely along a straight line.
Would your straight line cross the x axis at a value whose magnitude is nearly equal
to one, much greater than one, or much less than one? EXPLAIN YOUR ANSWER.
4. The Moseley formula for the frequency of the K x ray in an element of atomic
number Z depends not on Z but on Z - 1. Explain in detail the reason for the 1. Base
your discussion on the quantum mechanical wave functions of the atom, and specify
whether the 1 is exact or an approximation.
5. The electronic configuration of nitrogen (Z = 7) is 1s22s22p3. There is an empirical
rule that requires the electrons in unfilled shells to have quantum numbers so that the
sum of the z components of their spins has the maximum possible value. Using this
rule, give the complete set of quantum numbers n,l,ml,ms for the three 2p electrons.
EXPLAIN YOUR ANSWER.
Answers
1. all have “outer” 6s electrons that determine chemical properties
2. much smaller
3. much greater then one
4. approximate factor based on screening by remaining 1s electron
5. (2,1,+1,+1/2), (2,1,0,+1/2), (2,1,-1,+1/2)
C. Problems
1. (a) The Kα X ray in a certain element has an energy of 8585 eV. Identify the element
by its atomic number.
(b) The Kα X ray is emitted when an electron in the n = 2 shell makes a transition to
fill a vacancy that has been created in the n = 1 shell. The Kβ X ray is emitted
172
when an electron in the n = 3 shell makes a transition to fill a vacancy that has
been created in the n = 1 shell. Estimate the energy of the Kβ X ray in this
element.
2. (a) In a certain one-electron atom, the longest wavelength at which the atom in its
ground state can absorb a photon is 7.598 nm. What is the next longest
wavelength at which a photon can be absorbed from the ground state of this atom?
(b) A neutral atom of zinc has 30 electrons. What is the energy of the Kα X ray of
zinc?
Answers
1. (a) 30 (b) 10,175 eV
2. (a) 6.411 nm (b) 8.58 keV
173
Problem Solutions
1. (a) For a 2p electron, n = 2, l = 1, ml = 0,±1 and ms = ±½, so the possible sets of quantum
numbers (n,l,ml,ms) are:
(2,1,+1,+½), (2,1,+1,−½), (2,1,0,+ ½), (2,1,0,−½), (2,1,−1,+½), (2,1,−1,−½)
(b) There are 6 possible sets of quantum numbers for each electron, so the total number
of possibilities for 2 electrons is 6 × 6 = 36.
(c) The Pauli principle prevents the two sets from being identical. There will be 6
combinations in which the two sets are identical; eliminating these combinations leaves
30 allowed combinations.
(d) Because the n values are different, the Pauli principle does not restrict the number of
combinations, to there will be 36 possible combinations.
2. (a) The two electrons in the 1s level have ms of +1/2 and −1/2, so they do not contribute
to the total ms, and the same is true for the two electrons in the 2s level. In the 2p level,
there are three different possible values of ml, and for each of those values we can assign
a set of quantum numbers with ms = +1/2, so the maximum possible value of the total ms
is +3/2.
(b) (n, l, ml, ms) = (2, 1, +1, +1/2), (2, 1, 0, +1/2), (2, 1, −1, +1/2)
(c) There is only one possible value of the total ml in the states that maximize ms, and
from the states listed in (b) that value is +1 + 0 + (−1) = 0.
(d) We could maximize the total ml by giving the first 2p electron ml = +1, and the second
electron can also have ml = +1 if we give these two electrons opposite values of ms. The
third electron cannot have ml = +1, so we must assign it ml = 0 and the maximum total ml
is +2.
3. (a) There are seven possible values of ml (+3, +2, +1, 0, −1, −2, −3). For each choice of
ml, the value of ms can be either +1/2 or −1/2, so there will be a total of 14 possible
combinations of ml and ms.
(b) By a suitable choice of ml, it is possible to have as many as seven electrons in the 4f
level with ms = +1/2. So the three electrons can each be assigned ms = +1/2 for a total of
+3/2.
(c) Two electrons can be assigned ml = +3 (one with ms = +1/2 and one with ms = −1/2).
The next highest possible value of ml available for the third electron is ml = +2, so the
maximum value of the total is +3 + 3 + 2 = +8.
(d) We can assign ms = +1/2 to no more than seven 4f electrons, and so the last three must
have ms = −1/2 which gives a total of 7(+1/2) + 3(−1/2) = +2.
(e) We can maximize the total ml by assigning two electrons each to ml = +3, +2, +1, 0,
and −1, for a total of +10.
4. (a) In beryllium (1s22s2) the smallest energy jump is from 2s to 2p.
(b) In neon (1s22s22p6) the smallest energy jump is from 2p to 3s.
(c) From Figure 8.1 we see that the 2s→2p energy difference is smaller than the 2p→3s
difference, so the minimum absorption energy would be smaller for beryllium.
174
5. (a) From Figure 8.2 we find: N (2p3), P (3p3), As (4p3), Sb (5p3), Bi (6p3).
(b) Co (3d7), Rh (4d7), Ir (5d7), Mt(6d7)
6. (a) [Ne] 3s23p3
(b) [Ar] 4s23d3
(c) [Kr] 5s24d105p3
(d) [Xe] 6s24f145d106p2
7. (a) [Ar]4s23d6.
(b) The 4s electrons and the Ar core have a total ms of zero. Of the six 3d electrons, at
most five can have ms = +1/2 without violating the Pauli principle (because there are only
five different ml labels that can be used), and the sixth electron must then have ms = −1/2.
The total ms is then 5 × (+1/2) + (−1/2) = 2.
(c) The five electrons with ms = +1/2 use up all of the possible ml values (+2, +1, 0, −1,
−2), which sum to zero. The sixth electron has a maximum ml of +2, so the maximum
total ml is +2.
(d) The next available level for one of the 3d electrons is 4p. The remaining five 3d
electrons can all have ms = +1/2, and so can the single 4p electron. The maximum total
ms is 5 × (+1/2) + (+1/2) = 3. The ml values of the five 3d electrons again sum to zero,
and the 4p electron has a maximum ml of of +1, so the total ml is +1.
8. Singly ionized lithium has two electrons. When one of those is excited to a higher level,
it is screened by the one electron remaining in the 1s level so Z eff = 3 − 1 = 2 . The
expected energy when the outer electron is excited to the 2p level is
En = (−13.6 eV)
2
Z eff
22
(
13.6
eV)
=
−
= −13.6 eV
22
n2
which agrees very well with the measured value of −13.4 eV. When the outer electron is
in the 3d level, its expected energy is
En = (−13.6 eV)
2
Z eff
22
(
13.6
eV)
=
−
= −6.0 eV
32
n2
in excellent agreement with the measured value.
9. The outer electron is screened by the three inner electrons, so Z eff = 4 − 3 = 1 . The
expected energy of the 3p excitation is
En = (−13.6 eV)
2
Z eff
12
(
13.6
eV)
=
−
= −1.51 eV
32
n2
En = (−13.6 eV)
2
Z eff
12
(
13.6
eV)
=
−
= −0.85 eV
42
n2
and for 4d
175
10.
In lithium,
3d→3p
λ = 610.4 nm
4d→3p
λ = 460.3 nm
1240 eV ⋅ nm
= 2.03 eV
λ
610.4 nm
hc 1240 eV ⋅ nm
ΔE =
=
= 2.69 eV
λ
460.3 nm
ΔE =
hc
=
ΔE (4d → 3d ) = ΔE (4d → 3 p) − ΔE (3d → 3 p) = 2.69 eV − 2.03 eV = 0.66 eV
In sodium,
3d→3p
λ = 819.1 nm
4d→3p
λ = 568.6 nm
1240 eV ⋅ nm
= 1.51 eV
λ
819.1 nm
hc 1240 eV ⋅ nm
ΔE =
=
= 2.18 eV
λ
568.6 nm
ΔE =
hc
=
ΔE (4d → 3d ) = ΔE (4d → 3 p ) − ΔE (3d → 3 p) = 2.18 eV − 1.51 eV = 0.67 eV
⎛ 1 1⎞
In hydrogen, ΔE (4 → 3) = (−13.6 eV) ⎜ 2 − 2 ⎟ = 0.66 eV
⎝4 3 ⎠
The agreement is very good, because in lithium and sodium the outer electron is screened
by the Z−1 inner electrons, and so the outer energy levels are well approximated by the
hydrogenic levels with Z = 1.
11.
(a) From Figure 8.4 we find the 3d→3p energy difference to be
ΔE (3d → 3 p) = ΔE (3d → 2 s) − ΔE (3 p → 2 s ) = ΔE (3d → 2 p ) + ΔE (2 p → 2s ) − ΔE (3d → 2s )
hc
hc
hc
=
+
−
λ (3d → 2 p) λ (2 p → 2 s) λ (3 p → 2 s)
⎛
⎞
1
1
1
= (1240 eV ⋅ nm) ⎜
+
−
⎟ = 0.045 eV
⎝ 610.4 nm 670.8 nm 323.3 nm ⎠
(b)
ΔE (ns → 2 s ) = ΔE (ns → 2 p ) + ΔE (2 p → 2 s ) =
hc
hc
+
λ (ns → 2 p) λ (2 p → 2s)
⎛
⎞
1
1
ΔE (3s → 2s ) = (1240 eV ⋅ nm) ⎜
+
⎟ = 3.374 eV
⎝ 812.7 nm 670.8 nm ⎠
⎛
⎞
1
1
ΔE (4 s → 2 s ) = (1240 eV ⋅ nm) ⎜
+
⎟ = 4.373 eV
⎝ 491.2 nm 670.8 nm ⎠
⎛
⎞
1
1
ΔE (5s → 2s ) = (1240 eV ⋅ nm) ⎜
+
⎟ = 4.750 eV
⎝ 427.3 nm 670.8 nm ⎠
176
(c)
ΔE (2 p → 2 s ) = E (2 p) − E (2 s )
E (2 p ) = E (2 s ) + ΔE (2 p → 2 s ) = E (2 s ) +
= −5.39 eV +
hc
λ (2 p → 2s)
1240 eV ⋅ nm
= −3.54 eV
670.8 nm
The 2p ionization energy is therefore 3.54 eV.
E (3s ) = E (2s ) + ΔE (3s → 2s ) = −5.39 eV + 3.37 eV = −2.02 eV
The 3s ionization energy is 2.02 eV.
12. Solving Equation 8.4 for Z with ΔE =
Z = 1+
hc
λ
=
1240 eV ⋅ nm
= 6392 eV , we obtain
0.1940 nm
ΔE
6392 eV
= 1+
= 26
10.2 eV
10.2 eV
so the element is iron.
13. Ca (Z = 20):
Zr (Z = 40):
Hg (Z = 80):
ΔE = (10.2 eV)( Z − 1) 2 = (10.2 eV)(19) 2 = 3.68 keV
ΔE = (10.2 eV)( Z − 1) 2 = (10.2 eV)(39) 2 = 15.5 keV
ΔE = (10.2 eV)( Z − 1) 2 = (10.2 eV)(79) 2 = 63.7 keV
The values computed from Moseley’s law are smaller than the measured values, and the
discrepancy increases as Z increases.
14.
There is nothing that prevents all 6 electrons from having ms = +½, so
M S ,max = 1 2 + 1 2 + 1 2 + 1 2 + 1 2 + 1 2 = 3 and S = 3 . According to the Pauli principle, the five
3d electrons must all have different ml values, which are +2, +1, 0, −1, −2. The 4s
electron has only ml = 0. Thus M L ,max = +2 + 1 + 0 + (−1) + (−2) + 0 = 0 and so L = 0. The
configuration is L = 0, S = 3.
15. (a) The two 6s electrons have opposite spins (ms = +½ and ms = −½) but each of the other
two electrons can have ms = +½, so S = M S ,max = + 1 2 + (− 1 2 ) + 1 2 + 1 2 = 1 . The Pauli
principle does not restrict the ml values of the 4f and 5d electrons, so
L = M L ,max = 0 + 0 + 3 + 2 = 5 . The ground state is L = 5, S = 1.
(b) Once again, the two 6s electrons have opposite ms values. The 4f shell can hold up to
14 electrons, so all 7 electrons can have ms = +½, as can the single 5d electron. Thus
M S ,max = 8(+ 1 2) = 4 so S = 4. If all seven of the 4f electrons have the same ms, they must
all have different ml values: +3, +2, +1, 0, −1, −2, −3, which sum to zero. The only
contribution to L comes from the 5d electron with ml = 2. Thus L = 2.
177
(c) There is no contribution to L or S from the filled 4f subshell. The spin of the nine 5d
electrons is maximized by giving five of them ms = +½ while the other four must then
have ms = −½. The 6s electron also contributes ms = +½, so M S ,max = 1 and S = 1. The 6s
electron has ml = 0 and the five 5d electrons with ms = +½ must have ml = +2, +1, 0, −1,
−2. To maximize ML, the remaining four 5d electrons must have ml = +2, +1, 0, −1, so L
= 2.
16.
(a) The configuration of fluorine is [He]2s22p5. Only the five 2p electrons contribute to L
or S. The total spin is maximized with three having ms = +½ and two having ms = −½,
and thus S = M S ,max = 1 2 . The three electrons with ms = +½ have ml = +1, 0, −1 for a
total of zero. The two electrons with ms = −½ maximize ML if they are assigned ml = +1
and 0, so L = M L ,max = 1 .
(b) The configuration of magnesium is [Ne]2s2. The 2s electrons must have opposite
spins, so S = 0, and they both have l = 0, so L = 0.
(c) The configuration of titanium is [Ar]4s23d2. The 4s electrons do not contribute to L
or S. The two 3d electrons can both have ms = +½, so S = M S ,max = 1 2 + 1 2 = 1 . If they
have the same ms, they must have different ml, and the maximum values are +2 and +1,
so L = M L ,max = 2 + 1 = 3 .
(d) The configuration of iron is [Ar]4s23d6. The 4s electrons do not contribute to L or S.
Maximizing the spins of the six 3d electrons gives five with ms = +½ and one with ms =
−½, so S = M S ,max = 1 2 + 1 2 + 1 2 + 1 2 + 1 2 − 1 2 = 2 . The five 3d electrons with ms = +½ must
have ml = +2, +1, 0, −1, −2, for a total of zero. The maximum ml of the remaining 3d
electron is +2, so L = M L ,max = 2 .
17.
Each electron has s = ½, so the possible values of the total S for the two electrons is 0 or
1. The two d electrons, each with l = 2, can couple to give L = 0, 1, 2, 3, 4.
18.
Figure 8.18 shows 6 states with different L and S values that make up the 2p13p1 group.
Each of these states has a degeneracy of (2S + 1)(2L + 1):
degeneracy
L = 0, S = 0
1
L = 1, S = 0
3
L = 2, S = 0
5
L = 0, S = 1
3
L = 1, S = 1
9
L = 2, S = 1
15
Total = 36
The total number of individual states is 36, in agreement with the number found in
Problem 1(d).
178
19.
(a) For λ = 632.8 nm,
E=
P=
hc
λ
=
1240 eV ⋅ nm
= 1.96 eV = 3.14 × 10−19 J
632.8 nm
3.5 × 10−3 J/s
= 1.12 ×1016 photons/s
−19
3.14 ×10 J/photon
(b) From Equation 3.10,
E=
2μ0 cPav
2(4π ×10−7 T ⋅ m/A)(3.00 ×108 m/s)(3.5 ×10−3 W)
=
= 763 V/m
A
π (1.2 ×10−3 m)2
For the incandescent bulb,
E=
20.
2μ0 cPav
2(4π ×10−7 T ⋅ m/A)(3.00 × 108 m/s)(100 W)
=
= 77 V/m
A
π (1 m)2
(a) There are 6 possible sets of quantum numbers for an electron in the 2p level,
corresponding to the three possible values of ml (+1, 0, −1) and the two possible values of
ms (+1/2, −1/2). The first electron can be assigned any one of these 6 sets, leaving 5 sets
that could be assigned to the second electron, 4 for the third, and 3 for the fourth. The
total number of possibilities is then 6 × 5 × 4 × 3 = 360. This would be the result if we
could somehow tell the difference among the electrons. Because all the electrons are
identical, we must correct for the different permutations obtained by simply switching the
assigned states among the four electrons; for each way of assigning the states, there are
4 × 3 × 2 = 24 different permutations, so the actual number of different ways of assigning
the quantum numbers is 360/24 = 15.
(b) We cannot have all four electrons with ms = +1/2 (nor all four with ms = −1/2),
because that would violate the Pauli principle (there are only three possible ml values that
can be assigned to the electrons). So the possible distributions of the ms values are three
with +1/2 and one with −1/2, two each with +1/2 and −1/2, and one with +1/2 and three
with −1/2, giving possible totals of +1, 0, and −1.
(c) We can assign at most two electrons with ml = +1; if the two others both have ml = 0,
we get the largest possible total ml of +2. Reversing the signs, we find that the smallest
possible value is −2. Other combinations can give all values in between, so the possible
values of the total are +2, +1, 0, −1, and −2.
(d) We maximize ms by assigning three electrons with ms = +1/2 and the fourth with ms =
−1/2. The first three electrons must have ml = +1. 0, and −1, which contributes a sum of
0 to the total ml. The fourth electron can have any allowed value of ml, so the possible
values of the total ml are +1, 0, or −1.
(e) The maximum total ml occurs when two electrons have ml = +1 and two have ml = 0.
In each case the two electrons must have ms = +1/2 and −1/2, so the total ms is 0.
179
21.
(a) For the 3s outer electron of sodium, inserting E3 = −5.14 eV into Equation 8.1 gives
Z eff = n
En
−5.14 eV
=3
= 1.84
−13.6 eV
−13.6 eV
The simple screening model predicts Zeff = 1, so clearly the 3s electron is slightly
penetrating the inner orbits and so is less screened by the inner electrons.
(b) For the 4f state,
Z eff = n
En
−0.85 eV
=4
= 1.00
−13.6 eV
−13.6 eV
so the screening is complete, with the 11 positive charges in the nucleus screened by the
10 electrons in the n = 1 and n = 2 shells.
22.
180
150
ΔE 120
(eV)1/2 90
60
30
0
0
10
20
30
40
50
60
Z
The slope of the line is 3.48 eV1/2 and the intercept is 1.8.
The Kβ X rays originate from the n = 3 shell, so we must modify Equation 8.4
accordingly:
⎛1 1⎞
ΔE = E3 − E1 = (−13.6 eV)( Z − 1) 2 ⎜ 2 − 2 ⎟ = (12.1 eV)( Z − 1) 2
⎝3 1 ⎠
The expected slope is then (12.1 eV)1/2 = 3.48 eV1/2, which agrees exactly with the slope
of the graph. The screening model predicts an intercept of 1; the value from the graph is
slightly larger, which suggests that our assumption that the screening is due to a single 1s
electron is not quite correct.
180
23.
80
ΔE
(eV)1/2
60
40
20
0
0
10
20
30
40
50
60
70
Z
The slope is 1.40 eV1/2 and the intercept is 6.4.
The Lα X rays originate from the n = 3 shell and lead to the n = 2 level. It is difficult to
calculate the screening effect of the 1s, 2s, and 2p electrons on the n = 3 electron that
makes the transition, so we’ll represent it by the value k.
⎛1 1 ⎞
ΔE = E3 − E2 = (−13.6 eV)( Z − k ) 2 ⎜ 2 − 2 ⎟ = (1.89 eV)( Z − k ) 2
⎝3 2 ⎠
The expected slope is (1.89 eV)1/2 = 1.38 eV1/2, in very good agreement with the slope of
the graph. If all of the n = 1 and n = 2 electrons contributed to the screening, we would
expect k = 9, in contrast to the value 6.4 obtained from the intercept of the graph.
24.
The wavelength difference is Δλ = 0.59 nm. By taking differentials of E = hc/λ, we can
find the corresponding energy difference:
ΔE =
hc
λ
2
Δλ =
1240 eV ⋅ nm
(0.59 nm) = 2.1×10−3 eV
2
(590 nm)
This energy difference comes from the interaction of a magnetic field B with a magnetic
moment that we assume is of the order of 1 μB. The energy difference between the cases
with the magnetic moment parallel to B and antiparallel to B is (see Figure 7.25)
ΔE = 2 μ B B , so
ΔE
2.1× 10−3 eV
B=
=
= 18 T
2 μ B 2(5.8 × 10−5 eV/T)
This is quite a large magnetic field, of the order of the largest that can be produced in the
laboratory with superconducting electromagnets.
25.
(a) Figure 8.4 shows that the longest absorption wavelength from the ground state is
670.8 nm, in the visible region of the spectrum.
(b) From Figure 8.17, the longest ground-state absorption wavelength is 58.4 nm, in the
ultraviolet region.
181
(c) The shortest absorption wavelengths (largest absorption energies) are those that ionize
the atom. For lithium this is
λ=
hc 1240 eV ⋅ nm
=
= 230 nm
E
5.39 eV
in the near ultraviolet region. For helium,
λ=
hc 1240 eV ⋅ nm
=
= 50.6 nm
E
24.5 eV
in the ultraviolet region.
26.
ΔE (4 p → 3 p ) = ΔE (4 p → 2s ) − ΔE (3 p → 2s ) =
=
hc
hc
−
λ (4 p → 2s ) λ (3 p → 2s )
1240 eV ⋅ nm 1240 eV ⋅ nm
−
= 0.655 eV
396.5 nm
501.6 nm
In hydrogen, ΔE (4 → 3) = (−13.6 eV)(1/ 42 − 1/ 32 ) = 0.661 eV . The agreement is very
good, because the 4p electron in helium is screened by the 1s electron, so that
Z eff = 2 − 1 = 1 .
hc
hc
ΔE (4d → 3d ) = ΔE (4d → 2 p ) − ΔE (3d → 2 p ) =
−
λ (4d → 2 p) λ (3d → 2 p)
1240 eV ⋅ nm 1240 eV ⋅ nm
=
−
= 0.663 eV
447.1 nm
587.6 nm
Again, the agreement with hydrogen is very good.
182
Chapter 9
This chapter provides an introduction to the structure and properties of molecules and
how the spatial properties of the atomic wave functions described in Chapters 7 and 8 can
be applied to understanding the arrangements of atoms in simple molecules. The
mathematics of molecular orbitals is beyond the level of this text, so only very simple
molecular wave functions are included: the hydrogen molecule ion H 2+ and the hydrogen
molecule H2. The structures of some simple molecules containing s and p orbitals are
illustrated. Both ionic and covalent bonds are briefly considered. Quantum states
associated with rotation and vibration are reviewed, and then applied to the analysis of
excited states in molecules. Electromagnetic transitions between states are discussed in
connection with molecular spectroscopy. The major changes from the 2nd edition involve
the restructuring of the latter material on rotations, vibrations, and spectroscopy.
Supplemental Materials
Information on the properties of molecules is tabulated in many locations; see, for
example, the Handbook of Chemistry and Physics (Chemical Rubber Publishing Co.), the
American Institute of Physics Handbook (American Institute of Physics), or the Journal
of Physical and Chemical Reference Data. The National Institute of Standards and
Technology (NIST) maintains a web site with chemistry reference data that includes
properties of diatomic molecules (http://webbook.nist.gov/chemistry).
Chapter 14 of Physlet Quantum Physics has programs for displaying the H +2 and H2 wave
functions and also the representation of the potential energy for diatomic molecules by
various functions such as Morse and Lennard-Jones. The PhET programs “Quantum
Bound States” and “Double Wells and Covalent Bonds” have the option of displaying the
one-dimensional wave functions and energy levels for an electron interacting with two
positive charges separated by a distance that may be varied by the user.
More than 100 different types of molecules have been discovered in space, some with
more than10 atoms. Two popular-level articles on the search for molecules in space:
B. E. Turner, “Interstellar Molecules,” Scientific American 228, 50 (March 1973).
B. Zuckerman, “Interstellar Molecules,” Nature 268, 491 (August 1977).
The web sites of NASA, the Jet Propulsion Laboratory, and the National Radio
Astronomy Observatory provide links to lists of molecules discovered in space. Other
good sites include http://astrochemistry.net/ and the University of Cologne’s data base for
molecular spectroscopy: http://www.astro.uni-koeln.de/site/vorhersagen/ .
Suggestions for Additional Reading
Books on molecular spectroscopy that include introductory as well as advanced material:
G. M. Barrow, Introduction to Molecular Spectroscopy (McGraw-Hill, 1962).
183
M. Karplus and R. N. Porter, Atoms and Molecules (W. A. Benjamin, 1970).
P. S. C. Mathews, Quantum Chemistry of Atoms and Molecules (Cambridge University
Press, 1986)
L. Pauling, The Chemical Bond (Cornell University Press, 1967).
W. G. Richards and P. R. Scott, Structure and Spectra of Molecules (Wiley, 1985).
An advanced but very detailed work:
G. Herzberg, Molecular Spectra and Molecular Structure (Van Nostrand, 1950).
molecules.
Materials for Active Engagement in the Classroom
A. Reading Quizzes
1. Which is the correct procedure for combining the wave functions of the two electrons
in the H2 molecule to get the total electron probability density?
(1) First add (or subtract) the two individual wave functions, then square the
result; that is, |ψ1 ± ψ2|2.
(2) First square the two wave functions, then add or subtract the results; that is,
|ψ1|2 ± |ψ2|2.
2. As the rotational energy of a molecule increases, what happens to the spacing
between the rotational energy states?
(1) The energy spacing increases.
(2) The energy spacing decreases.
(3) The energy spacing remains constant.
Answers
1. 1
2. 1
B. Conceptual or Discussion Questions
1. Using the following atomic numbers for the 2p elements:
B
C
N
O
F
Ne
Z=
5
6
7
8
9
10
identify the molecule in each pair that has the larger dissociation energy.
(b) C2 or B2
(c) BC or BO
(a) CO or O2
(f) N2 or NO
(d) CF or CN
(e) FO or F2
2. Molecules have three different types of excited states: electronic, vibrational,
rotational. Put these in increasing order according to the amount of energy generally
required for each type of excitation.
(1) Vibrational, electronic, rotational
(2) Vibrational, rotational, electronic
(3) Electronic, vibrational, rotational
(4) Electronic, rotational, vibrational
(5) Rotational, electronic, vibrational
(6) Rotational, vibrational, electronic
184
3. As the angular momentum quantum number L increases, the actual energy of the
rotational states differs slightly from the predicted value EL = L( L + 1) 2 / 2mReq2 .
How would you expect the actual energy to differ from the predicted energy?
(1) The actual energy is a little larger than the predicted energy.
(2) The actual energy is a little smaller than the predicted energy.
4. The figure shows the energy curves of two different molecules that have the same
reduced mass. Which molecule has the larger (a) equilibrium radius? (b) dissociation
energy? (c) rotational constant B? (d) rotational inertia? (e) vibrational energy
spacing? (f) zero point energy?
Molecule 1
0
Answers
0.1
0.2
0.3
0.4
0.5
0.6
Molecule 2
1. (a) CO (b) C2 (c) BO (d) CN (e) FO (f) N2
4. (a) 2 (b) 1 (c) 1 (d) 2 (e) 1 (f) 1
2. 6
3. 2
Sample Exam Questions
A. Multiple Choice
1. A certain diatomic molecule absorbs energy by rotating. The first excited rotational
state is at an energy of 0.10 eV above the ground state. What is the energy of the
second excited rotational state above the ground state?
(a) 0.15 eV (b) 0.20 eV (c) 0.30 eV (d) 0.40 eV
2. In a measurement of the absorption of microwaves by a diatomic gas, you find that
the lowest absorption frequency is f0. What is the next lowest absorption frequency?
(b) 3f0
(c) 4f0
(d) 1.2f0
(a) 2f0
3. A certain diatomic molecule absorbs energy by vibrating. The first excited
vibrational state is at an energy of 2.0 meV above the ground state. What is the
energy of the second excited vibrational state above the ground state?
(a) 2.5 meV (b) 4.0 meV (c) 6.0 meV (d) 8.0 meV
4. Which has the smaller molecular binding energy, neutral H2 or ionized H2+?
185
(b) H2+
(a) H2
(c) They are the same.
5. Photons emitted in transitions among the rotational or vibrational states of molecules
generally are in what region of the electromagnetic spectrum?
(a) X-ray
(b) Optical
(c) Ultraviolet
(d) Infrared
(e) Radio
6. The energy difference between the ground state and the first excited vibrational state
of molecular H2 is E. The energy difference between the first excited state and the
second excited state is:
(a) E
(b) 2E
(c) 3E
(d) 4E
7. In a certain rotating diatomic molecule, the energy difference between the ground
state and first excited state is 3.0 eV. What is the energy difference between the first
and second excited states?
(a) 1.5 eV
(b) 3.0 eV
(c) 6.0 eV
(d) 9.0 eV
(e) 12.0 eV
Answers
1. c
2. a
3. b
4. a
5. d
6. a
7. c
B. Conceptual
1. Depending on whether their spins are parallel or antiparallel, two electrons (each with
spin 1/2) can combine to give a total spin of 1 (parallel) or 0 (antiparallel). Only one
of these two possible values is correct for the two electrons in a H2 molecule. Which
one is correct? EXPLAIN YOUR ANSWER.
2. Consider what happens to the rotational and vibrational spacings of KH (mK = 39 u,
mH = 1 u) when the hydrogen is replaced by deuterium (heavy hydrogen, mD = 2 u).
Compared with KH, are the rotational spacings of KD larger or smaller? Are the
vibrational spacings of KD larger or smaller than those of KH? Which changes by
the larger amount, the rotational or the vibrational spacings? (Assume the
equilibrium separations of KH and KD are the same.) EXPLAIN YOUR
ANSWERS.
3. Put the following compounds in order of increasing dissociation energy of the carboncarbon bond: C2H2 , C2H4 , C2H6 . EXPLAIN YOUR ANSWER.
Answers
1. 0 (antiparallel)
2. smaller, smaller, rotational
3. C2H6 < C2H4 < C2H2
C. Problems
1. In a certain diatomic molecule, the two atoms can vibrate relative to their common
center of mass and also rotate about the center of mass. The masses of the two atoms
186
are 10.0 u and 30.0 u. At equilibrium, the two atoms are separated by a distance of
0.236 nm. The vibrational frequency is found to be 2.42 × 1013 s−1.
(a) Considering only vibrational motion and assuming there to be no rotation,
calculate the energies of the ground state and the first two excited states. Draw a
diagram showing the vibrational energy levels.
(b) Considering only rotational motion and assuming there to be no vibration,
calculate the energies of the ground state and the first two excited states. Draw a
diagram showing the rotational energy levels.
2. (a) Calculate the energies of the first 3 rotational excited states of molecular CN. The
equilibrium separation of CN is 0.117 nm and the masses of carbon and nitrogen are
12.00 u and 14.00 u.
(b) Draw an energy-level diagram showing the ground state and first 3 excited states.
Label each state with its energy, angular momentum, and degeneracy.
(c) On your diagram show all allowed absorption transitions and calculate their
wavelengths.
Answers 1. (a) 0.050 eV, 0.150 eV, 0.250 eV
(b) 0, 100 μeV, 300 μeV
2. (a) 0.471 meV, 1.413 meV, 2.827 meV
(c) 2.632 mm, 1.316 mm, 0.877 mm
187
Problem Solutions
1. The energy of H +2 is −16.3 eV, and the energy of H2 is −31.7 eV. The ionization energy
is the difference between these values:
Eion (H 2 ) = E (H +2 ) − E (H 2 ) = −16.3 eV + 31.7 eV = 15.4 eV
2. Let the negative charge on the sphere be −q. Then the potential energy between the
sphere and either of the protons is
Ue = −
1
qe
4πε 0 Req / 2
The total energy of the system includes the repulsion of the protons and the attraction of
the negative sphere for each of the protons:
E = U p + 2U e =
e2
1
qe
1 e
−2
=
(e − 4 q )
4πε 0 Req
4πε 0 Req / 2 4πε 0 Req
1
Inserting the value of Req = 0.106 nm and E = −B = −2.7 eV, we can solve to find
q = 0.30e
This quantity of charge is roughly consistent with the fraction of ψ2 that appears between
the two protons in Figure 9.3a.
3. (a) Each mole contains 6.022 × 1023 molecules, so
E=
410 × 103 J/mole
1
= 4.25 eV/molecule
23
6.022 × 10 molecules/mole 1.602 × 10−19 J/eV
(b)
E=
106 × 103 J/mole
1
= 1.10 eV/molecule
23
6.022 × 10 molecules/mole 1.602 × 10−19 J/eV
(c)
E=
945 × 103 J/mole
1
= 9.80 eV/molecule
23
6.022 × 10 molecules/mole 1.602 × 10−19 J/eV
4. NO has 15 electrons, NF has 16, and OF has 17. A total of 8 electrons will occupy the 1s
and 2s bonding and antibonding states, and 6 electrons can be placed in the three 2p
bonding states. The remaining electrons in each molecule must go into the 2p
antibonding states: one in NO, two in NF, and three in OF. So we would expect NO to
188
have the largest dissociation energy, followed by NF and then by OF. The measured
bond strengths and corresponding dissociation energies are consistent with these
predictions – NO: 631 kJ/mole and 6.54 eV; NF: 333 kJ/mole and 3.45 eV; OF: 222
kJ/mole and 2.30 eV.
5. (a) Be2 has four electrons, which fill the 1s bonding and antibonding states. Li2 has six
electrons, so in addition to filling the 1s bonding and antibonding states there are two
electrons available for the 2s bonding state. So we expect Li2 to have the greater
dissociation energy. The measured values are 0.61 eV for Be2 and 1.10 eV for Li2.
(b) B2 has 10 electrons, with 8 filling the 1s and 2s bonding and antibonding states so that
there are 2 electrons left for the 2p bonding state. C2 has 10 electrons, so 4 are available
for the 2p bonding states. We thus expect C2 to have the greater dissociation energy.
The measured values are 3.08 eV for B2 and 6.29 eV for C2.
(c) There are 14 electrons in CO and 16 in O2. In CO, 8 of the electrons fill the 1s and 2s
bonding and antibonding states, and so there are 6 electrons available for the 2p bonding
states. O2 has 8 electrons available for the 2p states, of which 6 go into bonding states
and 2 into antibonding states. We thus expect CO to have the greater dissociation energy.
The measured values are 11.17 eV for CO and 5.16 eV for O2.
6. (a) F2 has 18 electrons, 8 in the 1s and 2s bonding and antibonding states, 6 in the 2p
bonding states, and 4 in the 2p antibonding states. F2+ has one less electron in the
antibonding state, so it should have the greater dissociation energy. The measured values
are: 1.6 eV for F2 and 3.2 eV for F2+.
(b) N2 (14 electrons) has 6 electrons in the 2p bonding state, while N2+ has only 5. Thus
N2 should have the greater dissociation energy. The measured values are: 9.8 eV for N2
and 8.7 eV for N2+.
(c) NO (15 electrons) has 1 antibonding 2p electron while NO+ has none, so NO+ should
have the greater dissociation energy. The measured values are: 6.5 eV for NO and 10.9
eV for NO+.
(d) CN (13 electrons) has 5 bonding 2p electrons while CN+ has only 4, so CN should
have the greater dissociation energy. The measured values are: 7.9 eV for CN and 4.9 eV
for CN+.
7. The equilibrium separation of KBr is 0.282 nm, so
U=
e 2 1 1.440 eV ⋅ nm
=
= 5.11 eV
4πε 0 R
0.282 nm
8. The difference between the ionization energy of K and the electgron affinity of I is
4.34 eV − 3.06 eV = 1.28 eV
The potential energy will be 1.28 eV when the separation R is
189
R=
1 1.440 eV ⋅ nm
=
= 1.13 nm
4πε 0 U
1.28 eV
e2
Whenever R is less than 1.13 nm it is advantageous to have K+ and I− ions.
9. (a)
(b)
10.
p = qReq = (1.602 × 10−19 C)(0.193 × 10−9 m) = 30.9 × 10−30 C ⋅ m
pmeas 27.2 ×10−30 C ⋅ m
=
= 0.88, so NaF is 88% ionic.
qReq 30.9 ×10−30 C ⋅ m
p = qReq = (1.602 × 10−19 C)(0.160 × 10−9 m) = 25.6 × 10−30 C ⋅ m
pmeas 1.47 × 10−30 C ⋅ m
=
= 0.057 = 5.7% ionic
qReq 25.6 × 10−30 C ⋅ m
11.
p = qReq = 2(1.602 × 10−19 C)(0.194 × 10−9 m) = 62.1× 10−30 C ⋅ m
pmeas 26.5 × 10−30 C ⋅ m
=
= 0.427 = 42.7% ionic
qReq 62.1× 10−30 C ⋅ m
12.
(a) The reduced mass of the CN molecule is
m=
m(C)m(N)
(12.00 u)(14.00 u)
=
= 6.462 u
m(C) + m(N) 12.00 u + 14.00 u
The vibrational energy is
E= ω=
k
k
1.017 ×104 eV/nm 2
(197.3
eV
nm)
= c
=
⋅
= 0.2565 eV
m
mc 2
(6.462 u)(931.5 × 106 eV/u)
The first excited state would be at energy E = 0.2565 eV above the ground state and the
second excited state would be at energy 2E = 0.5130 eV above the ground state.
(b) The force constant is smaller by 3.42% or by a factor of 0.9658, so the energy, which
is proportional to k1/2, would be smaller by 0.96581/2 = 0.9828. The vibrational energy
would then be 0.9828 × 0.2565 eV = 0.2521 eV, so the first excited state would be 0.2521
eV above the ground state and the second excited state would be 0.5042 eV above the
ground state.
13.
The reduced mass of BeO is
190
m=
m(Be)m(O)
(9.012 u)(15.995 u)
=
= 5.764 u
m(Be) + m(O) 9.012 u + 15.995 u
The vibrational frequency is
f =
c
λ
=
2.998 × 108 m/s
= 4.459 × 1013 Hz
−6
6.724 × 10 m
and the force constant is then
4π 2 f 2 mc 2 4π 2 (4.459 ×1013 Hz) 2 (5.764 u)(931.5 ×106 eV/u)
=
c2
(2.998 × 108 m/s) 2 (109 nm/m) 2
= 4.689 ×103 eV/nm 2
k = ω 2m =
14.
2(0.25 eV)
= 310 eV/nm 2 = 310 × 1018 eV/m 2
(0.040 nm) 2
(23 u)(35.5 u)
mm
= 13.96 u using average mass of Cl
m= 1 2 =
m1 + m2 23 u + 35.5 u
k=
1
kc 2
=
2
2π
mc
(310 × 1018 eV/m 2 )(3.0 × 108 m/s) 2
= 7.4 ×1012 Hz
(13.96 u)(931.5 ×106 eV/u)
f =
1
2π
λ=
c 3.00 × 108 m/s
=
= 40 μ m (infrared region)
7.4 × 1012 Hz
f
hf = 0.031 eV
The approximation is valid for an energy range of about 0.25 eV, or up to about N = 8.
15.
(a) The vibrational energy is E = ω = k / m , and so E depends on the reduced mass as
m−1/2. The reduced mass of CO made with 12C and 16O is
m(12 C16 O) =
m(12 C)m(16 O)
(12.00 u)(16.00 u)
=
= 6.857 u
12
16
m( C) + m( O) 12.00 u + 16.00 u
Substituting 18O for 16O would give a reduced mass of
m(12 C18O) =
m(12 C)m(18 O)
(12.00 u)(18.00 u)
=
= 7.200 u
12
18
m( C) + m( O) 12.00 u + 18.00 u
Because the vibrational energy depends on m−1/2, the vibrational energy of 12C18O is
191
E (12 C18O) = E (12 C16O)
m(12 C16 O)1/2
6.857 u
= (0.2691 eV)
= 0.2626 eV
12 18
1/2
m( C O)
7.200 u
(b) The reduced mass of 14C16O is
m(14 C16 O) =
m(14 C)m(16 O)
(14.00 u)(16.00 u)
=
= 7.467 u
14
16
m( C) + m( O) 14.00 u + 16.00 u
The vibrational energy is then
E (14 C16 O) = E (12 C16 O)
16.
m(12 C16 O)1/2
6.857 u
= (0.2691 eV)
= 0.2579 eV
14 16
1/2
m( C O)
7.467 u
⎛ m + m2 ⎞ m12 x12 + m1m2 x22 + m1m2 x12 + m22 x22
I = m1 x12 + m2 x22 = ( m1 x12 + m2 x22 ) ⎜ 1
⎟=
m1 + m2
⎝ m1 + m2 ⎠
m1m2 x12 + 2m1m2 x1 x2 + m1m2 x22
mm
=
= 1 2 ( x12 + 2 x1 x2 + x22 ) = m
m1 + m2
m1 + m2
17.
For NaCl (using the average mass of 35.5 u for Cl) and with Req = 0.236 nm,
m=
(23.0 u)(35.5 u)
m1m2
=
= 13.96 u
m1 + m2 23.0 u + 35.5 u
(197 eV ⋅ nm) 2
c
=
=
= 2.68 × 10−5 eV
B=
2
2 2
6
2
2mReq 2mc Req 2(13.96 u)(931.5 × 10 eV/u)(0.236 nm)
2
2 2
hc 1240 eV ⋅ nm
=
= 23.1 mm
ΔE 5.36 ×10−5 eV
hc 1240 eV ⋅ nm
=
= 11.6 mm
L = 2 to L = 1: ΔE = 4 B = 1.07 × 10−4 eV and λ =
ΔE 1.07 × 10−4 eV
hc 1240 eV ⋅ nm
=
= 7.71 mm
L = 3 to L = 2: ΔE = 6 B = 1.61× 10−4 eV and λ =
ΔE 1.61×10−4 eV
L = 1 to L = 0: ΔE = 2 B = 5.36 × 10−5 eV and λ =
18.
For rotations about an axis that passes through the central carbon atom, the rotational
inertia involves only the two oxygen atoms: I = 2mO R 2 , where mO is the mass of an
oxygen atom and R is the distance of the oxygens from the rotation axis. The rotational
energy then depends on
192
c
(197 eV ⋅ nm) 2
=
=
=
2 I 4mO R 2 4mO c 2 R 2 4(16 u)(931.5 × 106 eV/u)(0.116 nm) 2
2
2
2 2
= 4.84 × 10−5 eV = 48.4 μ eV
and the energies of the rotational states are given by Equation 9.12, with
EL = (48.4 μ eV)L( L + 1) :
E0 = 0
E1 = (48.4 μ eV)(1)(2) = 96.8 μ eV
E3 = (48.4 μ eV)(3)(4) = 580.8 μ eV
19.
E2 = (48.4 μ eV)(2)(3) = 290.4 μ eV
E4 = (48.4 μ eV)(4)(5) = 968.0 μ eV
The reduced masses are
m35 =
(1.007825 u)(34.968853 u)
m1m2
=
= 0.979593 u
m1 + m2 1.007825 u + 34.968853 u
m37 =
(1.007825 u)(36.965903 u)
m1m2
=
= 0.981077 u
m1 + m2 1.007825 u + 36.965903 u
2 2
⎛ 1
1 ⎞
1 ⎞
c ⎛ 1
δ B = B (H Cl) − B(H Cl) = 2 ⎜
−
−
⎟=
⎟
2 ⎜
2
2 Req ⎝ m35 m37 ⎠ 2 Req ⎝ m35c m37 c 2 ⎠
35
2
37
2
⎞
1 ⎛ 197.3 eV ⋅ nm ⎞ ⎛
1
1
1
= ⎜
−
= 2.00 ×10−6 eV
⎟ ⎜
⎟
6
2 ⎝ 0.127 nm ⎠ ⎝ 0.979593 u 0.981077 u ⎠ 931.5 × 10 eV/u
20.
(a) Because there are no transitions with wavelengths between the two observed values,
these wavelengths must correspond to emissions from L + 1 → L and L + 2 → L + 1
(although we don’t yet know the value of L). The transition energies are:
L + 2 → L + 1:
ΔE =
L +1 → L :
ΔE =
hc
λ
hc
λ
=
1239.8 eV ⋅ nm
= 2.354 × 10−3 eV
526.6 × 103 nm
=
1239.8 eV ⋅ nm
= 1.883 × 10−3 eV
3
658.3 × 10 nm
From Equation 9.17, we see that successive values of ΔE increase by 2B, and so the
rotational spacing 2B is just the difference between the energies of successive emissions:
2 B = 2.354 ×10−3 eV − 1.883 ×10−3 eV = 4.71×10−4 eV
For the first transition, Equation 9.17 gives
193
L +1 =
ΔE 2.354 ×10−3 eV
=
=5
2B
4.71×10−4 eV
and thus the reported wavelengths must be from the 6 → 5 and 5 → 4 transitions.
(b) With Req = 0.1172 nm, the reduced mass is
m=
1 ( c) 2
(197.3 eV ⋅ nm) 2
=
= 6.459 u
c 2 2 BReq2 (931.5 ×106 eV/u)(4.71×10−4 eV)(0.1172 nm) 2
With m1 = 12.00 u for carbon, we solve Equation 9.10 for m2 to give
m2 =
(12.000 u)(6.459 u)
m1m
=
= 13.988 u
m1 − m 12.000 u − 6.459 u
The only stable atom with a mass near 14 u is nitrogen, so the molecule must be CN.
21.
ENL = ( N + 1/ 2)hf + BL( L + 1) = 2( N + 1/ 2) + 10 L( L + 1)
120
0
3
3
3
2
3
1
23
0
1 2
100
80
60
0
1 2
40
20
0
1 2
0
0
1
N
E
22.
(a)
194
L
20
1
5
15
1
4
10
1
1
1
1
3
2
1
0
0
5
5
0
4
0
0
0
0
0
3
2
1
0
E
N L
(b) ENL = ( N + 1/ 2) hf + BL( L + 1) = 10( N + 1/ 2) + 0.25 L( L + 1)
For N = 0 to N = 1, there are two sequences of absorption lines:
ΔE = E0 L − E1L ±1 = − E0 L + E1L ±1
L → L − 1: ΔE = 10 − L / 2
L=5 L=4 L=3 L=2 L=1
to
to
to
to
to
L=4 L=3 L=2 L=1 L=0
8
23.
9
L → L + 1: ΔE = 10 + ( L + 1) / 2
L=0 L=1 L=2 L=3 L=4
to
to
to
to to
L=1 L=2 L=3 L=4 L=5
11
10
12
For emission transitions N → N − 1 and L → L ± 1, so with ΔE = E NL − E N −1 L±1
L → L + 1: ΔE = hf + BL( L + 1) − B ( L + 1)( L + 2) = hf − 2 B ( L + 1)
L → L − 1: ΔE = hf + BL( L + 1) − B ( L − 1)( L) = hf + 2 BL
24.
(a)
m=
(39.1 u)(35.5 u)
mK mCl
=
= 18.6 u = 1.73 × 104 MeV/c 2
mK + mCl 39.1 u + 35.5 u
195
(b)
B=
2
2mReq2
=
(197.3 eV ⋅ nm) 2
c
=
= 1.58 × 10−5 eV
2 2
10
2
2mc Req 2(1.73 × 10 eV)(0.267 nm)
2 2
The spacing of the transitions is 2B = 3.16 × 10−5 eV.
25.
p( ENL ) = (2 L + 1)e − ENL / kT = (2 L + 1)e −[( N +1/ 2) hf + BL ( L +1)]/ kT
dp
B
= 2e −[( N +1/ 2) hf + BL ( L +1)]/ kT − (2 L + 1)e−[( N +1/ 2) hf + BL ( L +1)]/ kT (2 L + 1)
=0
dL
kT
2kT
2L + 1 =
B
p ( N = 1) e − (3/ 2) hf / kT
= − (1/ 2) hf / kT = e − hf / kT
p ( N = 0) e
26.
T=
27. For CO, m =
B=
−hf
−0.358 eV
=
= 3780 K
k ln[ p( N = 1) / p ( N = 0)] (8.617 ×10−5 eV/K) ln(1/ 3)
(12 u)(16 u)
mCmO
=
= 6.86 u = 6.39 × 103 MeV/c 2
28 u
mC + mO
2
2mReq2
2L + 1 =
28.
=
(197.3 eV ⋅ nm) 2
c
=
= 2.39 × 10−4 eV
2 2
9
2
2mc Req 2(6.39 ×10 eV)(0.113 nm)
2 2
2kT
2(0.025 eV)
=
= 14.5
2.39 ×10−4 eV
B
so
L=7
At the equilibrium separation R = Req, E = − E0 and dE / dR = 0 :
− E0 =
A
B
−
9
Req Req
and
dE −9 A B
= 10 + 2 = 0
dR Req
Req
Solving these two equations simultaneously, we obtain
A=
E0 Req9
8
B=
and
9A 9
= E0 Req
Req8 8
With these values we can write the energy equation as
196
E0
9E
1
1
− 0
9
8 ( R / Req )
8 R / Req
E=
20
Energy (eV)
15
10
5
Separation (nm)
0
-5
0
0.05
0.1
0.15
0.2
0.25
-10
29.
A
L
θ
O
L
B
AB = 2 L and
L
C
AC = ( AB ) 2 + ( BC ) 2 = 2 L2 + L2 = 3L
Using the law of cosines on triangle OAB:
( AB ) 2 = ( AO ) 2 + (OB )2 − 2( AO )(OB ) cos θ
but AO = OB = 12 AC , so
( AB ) 2 = 2( 12 AC ) 2 − 2( 12 AC ) 2 cos θ
⎡
θ = cos −1 ⎢1 −
⎣
( AB ) 2 ⎤
2 L2 ⎤
1⎞
−1 ⎡
−1 ⎛
=
−
=
−
cos
1
cos
⎜
⎟ = 109.5°
⎥
⎢
⎥
2
2
1
1
⎝ 3⎠
2 ( AC ) ⎦
⎣ 2 (3L ) ⎦
197
m=
m1m2
(m )(mH ) 1
= H
= mH
2
m1 + m2
mH + mH
For HD
m=
m1m2
(m )(2mH ) 2
= H
= mH
3
m1 + m2
mH + 2 mH
For D2
m=
m1m2
(2mH )(2mH )
=
= mH
2 mH + 2 mH
m1 + m2
30. For H2
With f ∝
f D2
mH / 2
mH / 2
1
3
1
f
we get HD =
=
= 0.866 and
=
=
= 0.707
4
2
f H2
f H2
2mH / 3
m
mH
f HD = 0.866(1.32 × 1014 Hz) = 1.14 × 1014 Hz
f D2 = 0.707(1.32 × 1014 Hz) = 9.33 × 1013 Hz
Req does not depend on the nuclear mass, so HD and D2 should have the same Req as H2.
The rotational parameter B depends inversely on the mass, so the rotational parameters
for HD and D2 can be found from the rotational parameter for H2 ( B = 0.0076 eV ) and
the mass ratios:
31.
For HD
B = (0.0076 eV)
mH / 2
= 0.0057 eV
2mH / 3
For D2
B = (0.0076 eV)
mH / 2
= 0.0038 eV
mH
(a) The vibrational energies depend on the reduced mass like m−1/2. With the deuterium
mass mD = 2mH, where mH is the mass of the ordinary hydrogen atom, the reduced masses
are m(H2) = mH/2, m(HD) = 2 mH/3, and m(D2) = mH. The vibrational energies are then
For HD
Evib (HD) = Evib (H 2 )
For D2
Evib (D 2 ) = Evib (H 2 )
m(H 2 )1/ 2
0.5mH
=(0.54 eV)
= 0.47 eV
1/ 2
m(HD)
0.667 mH
m(H 2 )1/ 2
0.5mH
=(0.54 eV)
= 0.38 eV
1/ 2
m(D 2 )
mH
The zero-point energy is half the vibrational energy, so the zero-point energies are 0.27
eV for H2, 0.23 eV for HD and 0.19 eV for D2.
198
(b) The depth of the minimum of the molecular energy curve is lower than the
dissociation energy (which is the energy necessary to add to the vibrational ground state
to reach E = 0) by the zero-point energy, so for H2 the minimum would be at an energy of
4.52 eV + 0.27 eV = 4.79 eV below zero. Assuming the same value for the energy
minimum for HD, the vibrational ground state of HD would then be 0.23 eV above the
minimum, or 4.79 eV − 0.23 eV = 4.56 eV below zero. For D2, the vibrational ground
state would be 4.79 eV − 0.19 eV = 4.60 eV below zero. Thus the dissociation energies
are 4.56 eV for HD and 4.60 eV for D2.
32.
(a) For H2, Evib = 0.54 eV and B = 0.0076 eV , so from Equation 9.16
L( L + 1) =
Evib
0.54 eV
=
= 71 and L ≅ 8
0.0076 eV
B
so 9 rotational states (L = 0 to 8) are between the vibrational states.
(b) For HCl, Evib = 0.358 eV and B = 0.00132 eV , so from Equation 9.16
L( L + 1) =
Evib
0.358 eV
=
= 271 and L ≅ 16
0.00132 eV
B
so 17 rotational states (L = 0 to 16) are between the vibrational states.
(c) For NaCl, Evib = 0.30 eV and B = 2.68 × 10−5 eV :
L( L + 1) =
Evib
0.030 eV
=
= 1119 and L ≅ 33
2.68 × 10−5 eV
B
so 34 rotational states are between the vibrational states.
33.
(a) The “missing” transition is at an energy of about 0.317 eV.
(b)
0.317 eV
E
=
= 7.66 ×1013 Hz
−15
h 4.14 ×10 eV ⋅ s
m m
(1 u)(80 u)
= 0.988 u = 920 MeV/c 2
m = H Br =
81 u
mH + mBr
f =
mc 2 (2π f ) 2 (920 ×106 eV)(2π ) 2 (7.66 ×1013 Hz) 2
=
= 2.37 × 1021 eV/m 2
k=
2
16
2 2
9.00 ×10 m /s
c
(c) With Req = 0.141 nm,
199
2B =
2
mReq2
=
(197.3 eV ⋅ nm) 2
c
=
= 2.1× 10−3 eV
2 2
6
2
mc Req (920 × 10 eV)(0.141 nm)
2 2
This value agrees nicely with the spacing of the lines in the spectrum, estimated to be
about 0.002 eV.
34. (a) The vibrational energy is hf = 0.54 eV . The vibrational states are non-degenerate, so
p ( N = 1) e − (3/ 2) hf / kT
= − (1/ 2) hf / kT = e − hf / kT
p ( N = 0) e
At T = 293 K, kT = 0.02525 eV.
p( N = 1)
= e − hf / kT = e −0.54 eV/0.02525 eV = 5.15 × 10−10
p( N = 0)
(b) In the N = 2 state,
p ( N = 2) e − (5/ 2) hf / kT
= − (1/ 2) hf / kT = e −2 hf / kT = e −2(0.54 eV)/0.02525 eV = 2.65 × 10−19
p ( N = 0) e
35.
(a) For NaCl, hf = 0.063 eV.
p ( N = 1) e − (3/ 2) hf / kT
=
= e − hf / kT = e −0.063 eV/0.02525 eV = 8.2 × 10−2
p ( N = 0) e − (1/ 2) hf / kT
(b)
36.
p ( N = 2) e − (5/ 2) hf / kT
= − (1/ 2) hf / kT = e −2 hf / kT = e −2(0.063 eV)/0.02525 eV = 6.8 × 10−3
p ( N = 0) e
(a) For H2, B = 0.0076 eV. At T = 293 K, kT = 0.02525 eV.
p( L)
= (2 L + 1)e − BL ( L +1) / kT = (2 L + 1)e − L ( L +1)(0.0076 eV)/(0.02525 eV) = (2 L + 1)e −0.301L ( L +1)
p (0)
p(1)
p(2)
p(3)
= 1.64,
= 0.822,
= 0.189
p(0)
p(0)
p(0)
(b) At T = 30 K, kT = 0.002585 eV and p( L) / p(0) = (2 L + 1)e −2.94 L ( L+1) .
p(1)
= 8.38 × 10−3 ,
p(0)
p(2)
= 1.09 × 10−7 ,
p(0)
200
p(3)
= 3.33 × 10−15
p(0)
37.
(a) For NaCl, B = 2.68 ×10−5 eV. At T = 293 K, kT = 0.02525 eV.
2
−5
−3
p( L)
= (2 L + 1)e − BL ( L +1) / kT = (2 L + 1)e − L ( L +1)(2.68×10 eV)/(0.02525 eV) = (2 L + 1)e −1.06×10 L ( L +1)
p (0)
p(1)
p(2)
p(3)
= 2.99,
= 4.97,
= 6.91
p(0)
p (0)
p (0)
(b) At T = 30 K, kT = 0.002585 eV and p ( L) / p(0) = (2 L + 1)e −1.04×10
p(1)
= 2.94,
p(0)
38.
p(2)
= 4.70,
p (0)
−2
L ( L +1)
.
p(3)
= 6.18
p (0)
(a) The difference in electronegativity between K and Br is 2.96 – 0.82 = 2.14. Based on
the values in Figure 9.21, we expect an ionic content in the range of 60-80%.
(b) The tabulated value of the electric dipole moment of KBr is 3.47 × 10−29 C⋅m. The
equilibrium separation is 0.282 nm so the expected dipole moment in a purely ionic
molecule would be
p = qReq = (1.602 ×10−19 C)(0.282 × 10−9 m) = 4.52 × 10−29 C ⋅ m
and thus the fractional ionic content is
3.47 × 10−29 C ⋅ m
= 77%
4.52 ×10−29 C ⋅ m
which agrees very well with the prediction based on the electronegativity values.
39.
(a) The energies corresponding to the reported frequencies are 388.7 μeV, 583.1 μeV,
and 971.7 μeV. The differences between successive values are 194.4 μeV and 388.6
μeV. For a sequence of rotational transitions, we know that the difference between
consecutive emissions is 2B. Noting that 388.6 μeV ≈ 2 × 194.4 μeV, these transitions
would be consistent with a rotational sequence with 2B = 194.4 μeV if the experiment
had not been able to observe a transition at 583.1 μeV + 194.4 μeV = 777.5 μeV. (b)
With 388.7 μeV/194.4 μeV = 2, the observed transitions must correspond to angular
momentum quantum numbers 2 → 1, 3 → 2, and 5 → 4 (with 4 → 3 missing from the
sequence). (c) The reduced mass of PN is
m=
(30.97 u)(14.00 u)
m(P)m(N)
=
= 9.642 u
m(P) + m(N) 30.97 u + 14.00 u
The equilibrium separation of PN is 0.1491 nm, so the rotational spacing is expected to
be
201
2B =
2
mReq2
=
( c)2
(197.3 eV ⋅ nm) 2
=
= 195.0 μ eV
mc 2 Req2 (9.642 u)(931.5 × 106 eV/u)(0.1491 nm)2
which agrees with the observed value of 194.4 μeV.
40. The energies corresponding to these two transitions are 663.05 μeV and 647.48 μeV.
The reduced masses of AlCl for the two different stable isotopes of Cl (masses 34.969 u
and 36.966 u) are:
m(Al35Cl) =
(26.982 u)(34.969 u)
m(Al)m(35 Cl)
=
= 15.230 u
35
m(Al) + m( Cl) 26.982 u + 34.969 u
m(Al37 Cl) =
(26.982 u)(36.966 u)
m(Al)m(37 Cl)
=
= 15.597 u
37
m(Al) + m( Cl) 26.982 u + 36.966 u
The equilibrium separation of the atoms is 0.2130 nm, so the rotational constants are:
B (Al35Cl) =
2
2mReq2
=
( c) 2
(197.3 eV ⋅ nm) 2
=
= 30.240 μ eV
2mc 2 Req2 2(15.230 u)(931.50 × 106 eV/u)(0.2130 nm) 2
( c)2
(197.3 eV ⋅ nm) 2
=
=
= 29.528 μ eV
B (Al Cl) =
2mReq2 2mc 2 Req2 2(15.597 u)(931.50 ×106 eV/u)(0.2130 nm) 2
37
2
We assume that the larger of the observed close-lying emissions is associated with
Al35Cl, because it has the larger rotational constant. Equation 9.16 then gives
L + 1 = ΔE / 2 B = 663.05 μ eV/2(30.240 μ eV) = 11 and similarly for Al37Cl the other
emission gives L + 1 = ΔE / 2 B = 647.48 μ eV/2(29.528 μ eV) = 11 . Thus both emissions
arise from the rotational transition with angular momentum quantum numbers 11 → 10.
(b) The rotational state with L = 11 is at an energy given by Equation 9.16:
E11 = BL( L + 1) = (30.240 μ eV)(11)(12) = 0.00399 eV
To have a reasonable probability to reach an excited state at this energy, the environment
of the molecules must be at a temperature of
T=
0.00399 eV
E
=
= 46 K
k 8.617 × 10−5 eV/K
(Here k is the Boltzmann constant, not the force constant for vibrations.) Although this is
cold by ordinary standards, it is far above the temperature of interstellar space (2.7 K),
which suggests that the star is warming the dust cloud.
202
Chapter 10
This chapter begins with a short exercise in discrete statistics that motivates the
ensuing discussion of classical and quantum statistics. New to this edition is an explicit
calculation of the density of states functions for particles and photons. The discussion of
the classical statistics has been changed from the 2nd edition by starting with a discussion
of the Maxwell-Boltzmann energy distribution and then deriving the speed and velocity
distributions from the energy distribution. The discussion of Doppler broadening of
spectral lines has been moved from a worked example to a full discussion. In the
presentation of the applications of Bose-Einstein statistics, the discussion of the Einstein
specific heat has been moved to Chapter 11 and a new section on Bose-Einstein
condensation has been added. Applications of Fermi-Dirac statistics now include white
dwarf stars and mixtures of 3He and 4He.
Supplemental Materials
Chapter 15 of Physlet Quantum Physics has several animations and exercises that
illustrate quantum statistical distributions. The statistical and thermal physics package in
the ComPADRE digital library (http://www.compadre.org/stp/items/detail.cfm?ID=7308)
also has animations that may be instructive for students.
Suggestions for Additional Reading
An excellent introduction to statistical physics, including examples of arranging and
sorting problems similar to the one in Section 10.2:
D. McLachlan Jr., Statistical Mechanical Analogies (Prentice-Hall, 1968).
More extensive treatments of statistical physics, at about the same mathematical level as
this chapter:
F. Reif, Statistical Physics, Volume 5 of the Berkeley Physics Series (McGraw-Hill, 1967).
W. G. V. Rosser, An Introduction to Statistical Physics (Ellis Horwood, 1982).
D. V. Schroeder, An Introduction to Thermal Physics (Addison Wesley Longman, 2000).
M. D. Sturge, Statistical and Thermal Physics: Fundamentals and Applications (A. K.
Peters, 2003).
Advanced texts, with many applications of classical and quantum statistics:
C. Kittel, Thermal Physics (Wiley, 1969).
P. M. Morse, Thermal Physics (Benjamin, 1965).
R. D. Reed and R. R. Roy, Statistical Physics for Students of Science and Engineering
(Intext, 1971).
The properties of liquid helium are discussed in a very general and highly readable book:
K. Mendelssohn, The Quest for Absolute Zero (McGraw-Hill, 1966).
203
For additional work on the properties of 3He, see:
N. D. Mermin and D. M. Lee, “Superfluid Helium 3,” Scientific American 235, 56
(December 1976).
Materials for Active Engagement in the Classroom
A. Reading Quizzes
1. Which distribution function provides the best description of the behavior of electrons
in a metal?
(1) Maxwell-Boltzmann
(2) Bose-Einstein
(3) Fermi-Dirac
2. Which statistical distribution might describe the energy distribution of photons from
the Sun?
(1) Maxwell-Boltzmann
(2) Bose-Einstein
(3) Fermi-Dirac
3. The density of states gives information about:
(1) the number of filled states at a particular energy
(2) the number of states available (either filled or empty) at a particular energy
(3) the probability for a particular state to be occupied
(4) the type of distribution function that describes the particles
4. The unusual properties of liquid helium occur because:
(1) there is a strong attractive force between the helium atoms
(2) the liquid exists only at a particularly low temperature
(3) two helium atoms in the liquid can combine to form a molecule
(4) the helium atoms can occupy the same quantum state
5. In a metal the Fermi energy describes
(1) the highest occupied energy state of a free electron at zero temperature
(2) the minimum energy necessary to remove an electron from the metal
(3) the mean thermal energy of the atoms at temperature T
(4) the energy necessary to break the bonds between the metal atoms
Answers
1. 3
2. 2
3. 2
4. 4
5. 1
B. Conceptual or Discussion Questions
1. Consider the states of the combined total spin of two particles, each of which has spin
5/2 with ms = +5/2, +3/2, +1/2, −1/2, −3/2, and −5/2.
(a) How many macrostates are there corresponding to the different values of the total
spin if the particles are distinguishable?
(1) 2 (2) 5 (3) 6 (4) 12 (5) 36
204
(b) If the two particles are distinguishable, what is the total number of microstates for
all the allowed macrostates?
(1) 6 (2) 12 (3) 18 (4) 24 (5) 36
(c) If the two particles are indistinguishable, what is the total number of microstates
for all the allowed macrostates?
(1) 6 (2) 12 (3) 15 (4) 21 (5) 36
(d) What are the allowed values for the total spin if the two particles are
indistinguishable?
(1) 0,1,2,3,4,5
(2) 1,3,5
(3) 0,5
(4) 5
(5) 0
2. Consider a collection of 4 identical atoms obeying the rules of quantum mechanics.
The atoms can occupy a set of equally spaced energy levels:
8 eV
6 eV
4 eV
2 eV
At a temperature of T = 0 K, what would be the average energy of these 4 atoms if
they behaved like:
(a) spin-1 particles
(b) spin-1/2 particles
(c) spin-1/2 particles in a strong magnetic field in which all the electron spins
point in the same direction
Give your answer in units of eV rounded to the nearest integer.
Answers
1. (a) 3 (b) 5 (c) 4 (d) 2
2. (a) 2 (b) 3 (c) 5
Sample Exam Questions
A. Multiple Choice
1.
Protons and neutrons have spin ½, just like the electron. Which function would best
describe the statistical energy distribution of protons and neutrons in a nucleus?
(a) Fermi-Dirac
(b) Maxwell-Boltzmann
(c) Bose-Einstein
(d) Protons and neutrons do not follow statistical rules in a nucleus.
2. Which statistical distribution function allows all particles to occupy the same
quantum state?
(a) Maxwell-Boltzmann
(b) Fermi-Dirac
(c) Bose-Einstein
3. In a “gas” of photons filling a container, the sharing of energy among the photons is
best described by which statistical distribution?
205
(a) Maxwell-Boltzmann
(b) Fermi-Dirac
(c) Bose-Einstein
4. A gas of atoms can be described with classical rather than quantum statistics only if
(a) the atoms exert strong forces on one another
(b) the atoms have no intrinsic spin
(c) the temperature of the gas is very low
(d) the average spacing between atoms is larger than their de Broglie wavelength
Answers
1. a
2. c
3. c
4. d
B. Conceptual
1. Let E represent the average energy of spin-1/2 electrons in a certain block of metal at
a temperature of 0 K. Now suppose the electrons have spin 1 instead of spin ½.
Would you expect the average energy of the spin = 1 electrons in an otherwise
identical block of metal at 0 K to be greater than, the same as, or less than the energy
E? EXPLAIN YOUR ANSWER.
2.
Answers
1. less than
C. Problems
1. (a) Consider a one-dimensional “lattice” of electrons in which a total of N electrons
occupy a length L. Derive the expression g ( E )dE = 2m / Eh 2 dE for the density of
states for this system.
(b) Assuming these particles to be described by the Fermi-Dirac distribution, find the
total number of particles at T = 0 and derive an expression for the Fermi energy of the
electrons.
2. Consider an atom at the surface of the Sun, where the temperature is 6000 K. The
atom can exist in only 2 states. The ground state is an s state and the excited state at
1.25 eV is a p state. What is the probability to find the atom in the excited state?
Answers
1. (b) EF = ( h 2 / 2m)( N / 2 L) 2
206
2. 21%
Problem Solutions
1. (a) There are 3 macrostates: A, in which one particle has 3 units of energy; B, in which
one particle has 2 units of energy; and C, in which each particle has 1 unit.
(b) In macrostate A, there are 3 different ways to choose which particle gets the 3 units.
We can represent the distribution of energy to the three particles in these microstates as
300, 030, and 003. For macrostate B, the microstates are 210, 201, 021, 120, 012, and
102 for a total of 6. For macrostate C, there is only one microstate, 111.
(c) There is a total of 10 microstates. Macrostate A has 3 of the 10 microstates, so there
is a 30% probability of finding the system in macrostate A. None of the particles in
macrostate A has 2 units of energy. There are 6 microstates in macrostate B, so there is a
60% probability of finding the system in B. Only one of the 3 particles in state B has 2
units of energy, so the probability is 1/3 × 60% = 20%. None of the particles in
macrostate C has 2 units of energy, so the overall probability of finding a particle with 2
units of energy is 20%.
There is a 2/3 chance of finding a particle with energy 0 in macrostate A and a 1/3 chance
in macrostate B, so the net probability of finding a particle with energy 0 is 2/3 × 30% +
1/3 × 60% = 40%.
2. (a) The possible macrostates (H = heads, T = tails) are 5H0T, 4H1T, 3H2T, 2H3T, 1H4T,
and 0H5T, for a total of 6 macrostates.
(b) Each toss has 2 possible outcomes, so the total number of possible outcomes is 25 =
32 microstates.
(c) 5H0T – 1 microstate
4H1T – 5 microstates
3H2T – 10 microstates
0H5T – 1 microstate
1H4T – 5 microstates
2H3T – 10 microstates
Total = 32 microstates
3. (a) There are 3 different z components ( + , 0, − ) for s = 1 and 2 different z components
( + / 2, − / 2 ) for s = 1/2, so the total number of possible combinations is 3 × 2 = 6.
(b) Two particles of spins 1 and 1/2 can combine to give a total spin of either 3/2 or 1/2.
So there are 2 macrostates of the total spin.
(c) For total spin 3/2 there are 4 microstates (z components +3 / 2, + / 2, − / 2, −3 / 2 ).
For total spin 1/2 there are 2 microstates ( + / 2, − / 2 ). The total number of microstates
is 4 + 2 = 6.
4.
p (0) =
4 × 5 + 3 × 20 + 3 × 20 + 2 × 30 + 3 × 10 + 2 × 60 + 2 × 10 + 1× 20 + 1× 30 + 0 × 5
= 0.400
5 × 210
p (3) =
0 × 5 + 0 × 20 + 0 × 20 + 0 × 30 + 2 × 10 + 1× 60 + 0 × 10 + 1× 20 + 0 × 30 + 0 × 5
= 0.095
5 × 210
p (5) =
0 × 5 + 1× 20 + 0 × 20 + 0 × 30 + 0 × 10 + 0 × 60 + 0 × 10 + 0 × 20 + 0 × 30 + 0 × 5
= 0.019
5 × 210
207
5. (a) Integral spin:
p (0) =
4 × 1 + 3 × 1 + 3 × 1 + 2 × 1 + 2 × 1 + 3 × 1 + 2 × 1 + 1 × 1 + 1× 1 + 0 × 1
= 0.420
5 × 10
p (3) =
0 × 1 + 0 × 1 + 0 × 1 + 0 × 1 + 1× 1 + 2 × 1 + 0 × 1 + 1× 1 + 0 × 1 + 0 × 1
= 0.080
5 × 10
(b) Spin 1/2:
p (0) =
2 × 1 + 2 × 1 + 1× 1
= 0.333
5× 3
p (3) =
0 × 1 + 1× 1 + 0 × 1
= 0.067
5× 3
6. (a) The expected total number of microstates, using Equation 10.2, is 11!/8!3! = 165.
Ignoring factors of 0! and 1!, which are equal to 1, we have
Macrostate
Distinguishable
8000
7100
6200
6110
5300
5210
5111
4400
4310
4220
4211
3320
3311
3221
2222
Total
4!/3! = 4
4!/2! = 12
4!/2! = 12
4!/2! = 12
4!/2! = 12
4! = 24
4!/3! = 4
4!/2!2! = 6
4! = 24
4!/2! = 12
4!/2! = 12
4!/2! = 12
4!/2!2! = 6
4!/2! = 12
4!/4! = 1
165
Number of Microstates
Indistinguishable,
integral spin
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
15
Indistinguishable,
half-integral spin
0
1
1
1
1
1
0
1
1
1
1
1
1
1
0
12
(b) For distinguishable particles, including the 15 macrostates in order
p (2) =
0 + 0 + 1 × 12 + 0 + 0 + 1 × 24 + 0 + 0 + 0 + 2 × 12 + 1× 12 + 1× 12 + 0 + 2 × 12 + 4 × 1
= 0.170
4 × 165
208
For indistinguishable particles with integral spin,
0 + 0 + 1 × 1 + 0 + 0 + 1 × 1 + 0 + 0 + 0 + 2 × 1 + 1 × 1 + 1× 1 + 0 + 2 × 1 + 4 × 1
= 0.200
4 × 15
p(2) =
and for indistinguishable particles with half-integral spin,
p(2) =
0 + 1 × 1 + 0 + 0 + 1 × 1 + 0 + 0 + 2 × 1 + 1 × 1 + 1× 1 + 0 + 2 × 1
= 0.167
4 ×12
7. (a) The z components of the spin of each of the particles are sz = ms with ms = +3/2,
+1/2, −1/2, −3/2. The z component of the combined spin S is S z = M S , with
M S = ms1 + ms 2 . There are 4 different possible ms for each particle, so the total number
of combinations is 4 × 4 = 16.
ms1,ms2
MS
+3
+2
+1
0
−1
−2
−3
Multiplicity
+3/2,+3/2
+3/2,+1/2; +1/2,+3/2
+3/2,−1/2; +1/2,+1/2; −1/2,+3/2
+3/2,−3/2; −3/2,+3/2; +1/2,−1/2; −1/2,+1/2
−3/2,+1/2; −1/2,−1/2; +1/2,−3/2
−3/2,−1/2; −1/2,−3/2
−3/2,−3/2
Distinguishable
Indistinguishable
1
2
3
4
3
2
1
1
1
2
2
2
1
1
Note that the total multiplicity is 16, as expected.
(b) The possible values of the total spin S are 3, 2, 1, and 0. For S = 3, we can have MS =
+3, +2, +1, 0, −1, −2, −3 for a multiplicity of 7. For S = 2, MS = +2, +1, 0, −1, −2 for a
multiplicity of 5. For S = 1, MS = +1, 0, −1 with multiplicity 3, and for S = 0, MS = 0.
The total multiplicity of these states is 7 + 5 + 3 + 1 = 16.
(c) Because the particles are indistinguishable, we cannot count the arrangements
obtained by interchanging ms1 and ms2 as separate microstates, for example +3/2,+1/2 and
+1/2,+3/2. The multiplicities are then reduced to 1 for the states with MS = +3, +2, −2, −3
and to 2 for states with MS = +1, 0, −1. The total multiplicity is now 10.
(d) Because we have states with MS = ±3, there must be a state with total spin S = 3. This
state must have MS = +3, +2, +1, 0, −1, −2, −3. That uses up 7 of the 10 permitted states.
The 3 remaining states have MS = +1, 0, −1, which must be S = 1.
8. From Equation 10.15,
g ( E )dE =
8π
8π (109 nm/m)3
2
=
E
dE
(2 ×10−4 eV) 2 (10−5 eV) = 5 × 106 m −3 = 5 cm −3
(hc )3
(1240 eV ⋅ nm)3
209
This is an extremely small number of available states, which suggests that the actual
density of these photons must be very small.
9. In two dimensions, the energy of a particle in a square region is E = (h 2 / 8mL2 )(nx2 + n y2 ) ,
with n 2 = nx2 + n y2 . If we imagine a two-dimensional nx n y coordinate system, the points
with a given value of E lie on a circle of radius n, and the points with energies between E
and E + dE lie on a circular ring of radius n and thickness dn, and thus of area 2π n dn .
Because the segment of the ring with positive values of nx and ny occupies only ¼ of its
area, the density of available states for particles of spin s is
g (n) dn =
1 2s + 1
2π n dn
4 L2
which gives the number of states per unit area. With E = h 2 n 2 / 8mL2 , we get
dE = (h 2 / 8mL2 )2n dn and so
g ( E ) dE = g (n) dn =
1 2s + 1 π dE
2π (2 s + 1)m
=
dE
2
2
2
4 L h / 8mL
h2
Note that g(E) for this case is independent of E.
10.
The energy of the photons is E = c px2 + p y2 = ( cπ / L) nx2 + n y2 . In two dimensions, we
can represent the possible energies of the photons as points in a nxny coordinate system.
The points with energy E lie on a circle of radius n = nx2 + n y2 , and the number of
photons with energies between E and E + dE is determined by the area of the ring
between radii n and n + dn, which is 2π n dn . Because nx and ny must be positive, only ¼
of the area of the ring contributes to the density of states. Allowing for the 2 polarization
states of the photons, the density of states is
g (n) dn =
1 2
2π n dn
4 L2
where the area occupied by the photons is L2. With E = cn / L and dE = ( c / L)dn , we
obtain
π ⎛ L⎞
2
4π 3
g ( E ) dE = g (n) dn = 2 ⎜ ⎟ E dE =
E dE
(hc ) 2
L ⎝ c⎠
11.
With s = 1/2 and mc2 0.511 MeV for electrons, we obtain
210
4π (2s + 1) 2(mc 2 )3/ 2 1/ 2
E dE
(hc )3
8π 2(0.511× 106 eV)3/ 2
=
(0.0252 eV)1/2 (0.000252 eV) = 2.7 × 1023 m −3
3
9
3
(1240 eV ⋅ nm) (1 m/10 nm)
g ( E )dE =
The atomic density of copper metal is 8.5 × 1028 atoms per m3, so there seems to be a
discrepancy between the density of states calculation and a model in which each atom
contributes an electron. The error lies in assuming that the electrons behave as if they
had thermal energies. In reality, the electrons that participate in electrical conduction
have much greater average energies, of the order of a few eV, which is sufficient to
provide rough agreement between the number of available energy states and the number
of conduction electrons available to occupy those states.
12.
With kT = (8.617 × 10−5 eV/K)(960 K) = 0.0827 eV , the ratio of the number of particles
N2 in the excited state E2 to the number N1 in the ground state E1 is
N 2 d 2 e − E2 / kT
=
= 3e − ( E2 − E1 ) / kT = 3e −0.25 eV / 0.0827 eV = 0.146
− E1 / kT
N1 d1e
The total number of particles is N = N1 + N 2 , so with ( N − N1 ) / N1 = 0.146 we get
N1 =
13.
1
N = 0.87 N
1 + 0.146
and
N 2 = N − N1 = 0.13 N
The levels are E1, E2, E3 with numbers of particles N1, N2, N3 such that the total number
of particles is N = N1 + N 2 + N 3 , or N / N1 = 1 + N 2 / N1 + N 3 / N1 . With
kT = (8.617 × 10−5 eV/K)(650 K) = 0.0560 eV , the Maxwell-Boltzmann distribution for
nondegenerate states gives
N 2 e − E2 / kT
= − E1 / kT = e − ( E2 − E1 ) / kT = e −0.045 eV/0.0560 eV = 0.448
N1 e
N 3 e − E3 / kT
= − E1 / kT = e − ( E3 − E1 ) / kT = e −0.135 eV/0.0560 eV = 0.090
N1 e
N / N1 = 1 + N 2 / N1 + N 3 / N1 = 1 + 0.448 + 0.090 = 1.538
N 2 / N = ( N 2 / N1 )( N1 / N ) = (0.448)(0.65) = 0.29
N 3 / N = 1 − N1 / N − N 2 / N = 1 − 0.65 − 0.29 = 0.06
211
so
N1 / N = 0.65
14. The most probable speed vp occurs where N(v) has its maximum value, which we find by
setting dN/dv to zero:
dN
⎛ m ⎞
= 4π N ⎜
⎟
dv
⎝ 2π kT ⎠
3/ 2
⎡ (2v )e − mv
⎣
2
/ 2 kT
+ v 2 ( −2mv / 2kT )e − mv
2
/ 2 kT
⎤=0
⎦
Cancelling common factors we find 2v − mv 3 / kT = 0 , so
vp =
15.
(a) With kT = (8.617 × 10−5 eV/K)(293 K) = 0.02525 eV , then Em = 32 kT = 0.0379 eV .
2 NA
(b) dN = N ( Em )dE =
Em1/2 e − Em / kT dE
π (kT )3/ 2
=
16.
2kT
m
2(6.02 × 1023 )
(0.0379 eV)1/2 e −0.0379 eV/0.02525 eV (0.000379 eV) = 2.78 ×1021
π (0.02525 eV)3/ 2
(a) With v = 505 m/s and dv = 10 m/s, Equation 10.20 gives
2⎛ m⎞
dN = N (v)dv = N
π ⎝⎜ kT ⎠⎟
3/ 2
2 − mv 2 / 2 kT
ve
× (505 m/s) 2 e − (39.95 u)(1.6605×10
−27
2 ⎡ (39.95 u)(1.6605 × 10−27 kg/u) ⎤
dv = (6.02 × 10 )
π ⎢⎣ (1.38 ×10−23 J/K)(293 K) ⎥⎦
23
kg/u)(505 m/s)2 / 2(1.38×10−23 J/K)(293 K)
(10 m/s) = 1.00 × 1022
(b) Now using Equation 10.25 we get
1/ 2
1/ 2
⎛ m ⎞
dN = N (vx ) dvx = N ⎜
⎟
⎝ 2π kT ⎠
× e− (39.95 u)(1.6605×10
−27
e
− mvx2 / 2 kT
⎡ (39.95 u)(1.6605 × 10-27 kg/u) ⎤
dvx = (6.02 ×10 ) ⎢
⎥
−23
⎣ 2π (1.38 ×10 J/K)(293 K) ⎦
23
kg/u)(505 m/s)2 / 2(1.38×10−23 J/K)(293 K)
(10 m/s) = 1.20 ×1021
Note that there are about an order of magnitude more atoms in the speed interval at 500
m/s than in the same velocity interval. This is because there are many ways to have a
speed of 500 m/s that don’t involve a velocity of 500 m/s in any particular direction. For
example, it is just as likely to have an atom with 3 components of 289 m/s (which gives a
speed of 500 m/s) as it is to have an atom with one component of 500 m/s and two
components of 0.
17. (a) The energy of the n = 2 to n = 1 transition in hydrogen is 10.2 eV. Multiplying on
both sides by Planck’s constant h, we can turn Equation 10.30 into an equation for the
energy linewidth, and with kT = (8.617 × 10−5 eV/K)(5800 K) = 0.500 eV we obtain
212
3/ 2
ΔE = 2 E0 (2 ln 2)kT / mc 2 = 2(10.2 eV) (2 ln 2)(0.500 eV)/(938.8 × 106 eV) = 554 μeV
(b) The natural linewidth is determined by the uncertainty relationship:
ΔE ∼
Δt
=
1.055 × 10−34 J ⋅ s
= 0.066 μeV
(10−8 s)(1.602 × 10−19 J/eV)
The natural linewidth is negligible in comparison with the Doppler-broadened linewidth.
18. (a) At a pressure of 1 atmosphere = 1.0 × 105 N/m2, the density of nitrogen gas is
1.0 × 105 N/m 2
N
P
=
=
= 2.5 × 1025 m −3
−23
V kT (1.38 × 10 J/K)(293 K)
With kT = (8.617 × 10−5 eV/K)(293 K) = 0.0252 eV , the ratio in Equation 10.36 is
λ
=
d
hc ( N / V )1/ 3
2mc 2 kT
=
(1240 eV ⋅ nm)(2.5 × 1025 m −3 )1/ 3 (10−9 m/nm)
2(28 u)(931.5 × 106 eV/u)(0.0252 eV)
= 0.010
Thus Equation 10.36 is easily satisfied in this case.
(b) The density of water is 1.0 × 103 kg/m3, which is equivalent to
⎞
N
1u
⎛ 1 molecule ⎞ ⎛
28
−3
= (1.0 ×103 kg/m3 ) ⎜
⎟ = 3.3 ×10 m
⎟⎜
−27
V
⎝ 18 u ⎠ ⎝ 1.67 ×10 kg ⎠
With kT = (8.617 × 10−5 eV/K)(293 K) = 0.0252 eV , the ratio in Equation 10.36 is
λ
d
=
hc ( N / V )1/ 3
2mc 2 kT
=
(1240 eV ⋅ nm)(3.3 × 1028 m −3 )1/ 3 (10−9 m/nm)
2(18 u)(931.5 ×106 eV/u)(0.0252 eV)
= 0.14
This ratio does not appear to be small enough to allow us to neglect quantum effects.
(c) The density of liquid helium at 4 K is 0.125 kg/L = 0.125 × 103 kg/m3, so
⎞
N
1u
⎛ 1 atom ⎞ ⎛
28
−3
= (0.125 ×103 kg/m3 ) ⎜
⎟ = 1.9 ×10 m
⎟⎜
−27
V
⎝ 4 u ⎠ ⎝ 1.67 × 10 kg ⎠
With kT = (8.617 ×10−5 eV/K)(4 K) = 3.45 ×10−4 eV , the ratio in Equation 10.36 is
213
λ
d
=
hc ( N / V )1/ 3
2mc 2 kT
=
(1240 eV ⋅ nm)(1.9 × 1028 m −3 )1/ 3 (10−9 m/nm)
2(4 u)(931.5 × 106 eV/u)(3.45 × 10−4 eV)
= 2.1
Clearly it is not correct to use Maxwell-Boltzmann statistics in this case.
(d) The density of solid copper is 8.95 g/cm3 and its molar mass is 63.5 g/mole, so
N ρ N A (8.95 g/cm3 )(6.02 ×1023 atoms/mole)
=
=
= 8.5 × 1028 atoms/m3
3
3
−6
V
M
(63.5 g/mole)(10 m / cm )
With one conduction electron per atom, the density of conduction electrons has this same
value. The ratio in Equation 10.36 is
λ
d
=
hc ( N / V )1/ 3
2mc 2 kT
=
(1240 eV ⋅ nm)(8.5 × 1028 m −3 )1/ 3 (10−9 m/nm)
2(0.511× 106 eV)(0.0252 eV)
= 34
It would not be appropriate to use Maxwell-Boltzmann statistics for this case, nor is it
correct to estimate the kinetic energy of the conduction electrons as kT.
19.
(a) Let’s assume that Maxwell-Boltzmann statistics will fail when the ratio in Equation
10.36 becomes larger than 0.1. When thus occurs, hc ( N / V )1/ 3 = 0.1 2mc 2 kT , or
with kT = (8.617 × 10−5 eV/K)(293 K) = 0.0252 eV ,
N ⎛ 0.1 2mc 2 kT
=⎜
V ⎜⎝
hc
3
3
⎞ ⎛ 0.1 2(28 u)(931.5 ×106 eV/u)(0.0252 eV) ⎞
⎟ = 2.5 × 1028 m −3
⎟ =⎜
−9
⎟ ⎜
⎟
(1240 eV ⋅ nm)(10 m/nm)
⎠ ⎝
⎠
Using the ideal gas law
P = ( N / V )kT = (2.5 × 1028 m −3 )(1.38 × 10−23 J/K)(293 K) = 1.01× 108 N/m 2 = 103 atm
At pressures below this extremely large value, we may safely use Maxwell-Boltzmann
statistics for nitrogen gas.
(b) At a pressure of 1 atmosphere = 1.0 × 105 N/m2, the density of nitrogen gas is
1.0 × 105 N/m 2
N
P
=
=
= 2.5 × 1025 m −3
V kT (1.38 × 10−23 J/K)(293 K)
Again choosing 0.1 as the critical value of the ratio in Equation 10.36, we solve for T:
T=
(hc ) 2 ( N / V ) 2 / 3
(1240 eV ⋅ nm) 2 (2.5 × 1025 m −3 ) 2 / 3 (10−9 m/nm) 2
=
= 2.9 K
0.01(2mc 2 k )
(0.01)(2)(28 u)(931.5 × 106 eV/u)(8.617 ×10−5 eV/K)
214
Nitrogen becomes a liquid at 77 K and a solid at 63 K, so clearly we are safe in using
Maxwell-Boltzmann statistics over most of the range in which nitrogen is a gas.
20. (a) Integrating Equation 10.38 over all photon energies, we obtain
∞
N = ∫ dN = ∫ N ( E )dE =
0
8π V ∞ E 2 dE
(hc )3 ∫0 e E / kT − 1
N 8π (kT )3 ∞ x 2 dx
=
.
V
(hc )3 ∫0 e x − 1
eV)(300 K) = 0.02585 eV , so
With x = E / kT and dx = dE / kT , we obtain
(b) At T = 300 K, kT = (8.617 × 10−5
N 8π (0.02585 eV)3
=
(107 nm/cm)3 (2.404) = 5.5 × 108 cm −3
V
(1240 eV ⋅ nm)3
At 3 K the number is reduced by (100)3 = 106, so the number is 550 cm−3.
21. (a) The total energy density is given by Equation 10.41:
U=
8π 5 k 4 4
8π 5 (8.617 × 10−5 eV/K) 4
=
(2.50 × 103 K) 4 = 1.84 × 107 eV/m3
T
15(hc)3
15(1240 eV ⋅ nm)3 (10−9 m/nm)3
(b) At T = 2.5 × 103 K, kT = (8.617 ×10−5 eV/K)(2.5 ×103 K) = 0.215 eV . The energy
emitted in the interval dE = 0.05 eV at E = 1.00 eV is
8π
E3
8π (109 nm/m)3 (1.00 eV)3
u ( E ) dE =
dE =
(0.05 eV) = 6.36 ×1015 eV/m3
3 E / kT
3 1.00 eV/0.215 eV
−1
−1
(hc ) e
(1240 eV ⋅ nm) e
The fraction of the total energy that this represents is
u ( E ) dE 6.36 × 1015 eV/m3
=
= 0.035
U
1.84 ×1017 eV/m3
(c) At 10.00 eV,
u ( E ) dE =
8π
E3
8π (109 nm/m)3 (10.00 eV)3
dE
(0.05 eV) = 4.16 eV/m3
=
3 E / kT
3 10.00 eV/0.215 eV
(hc ) e
(1240 eV ⋅ nm) e
−1
−1
u ( E ) dE
4.16 eV/m3
=
= 2.3 ×10−17
17
3
U
1.84 × 10 eV/m
215
22.
u(E ) =
8π E 3
1
3
E / kT
−1
(hc ) e
du
8π
=
dE (hc )3
⎡ 3E 2
⎛ e E / kT ⎞ ⎤
E3
−
⎢ E / kT
⎟ ⎥ = 0 for
E / kT
2 ⎜
e
1
(
e
1)
kT
−
−
⎝
⎠⎦
⎣
E = Emax
3(e Emax / kT − 1) = ( Emax / kT )e Emax / kT
This equation cannot be solved exactly, but an approximate solution can be found
numerically for Emax / kT = 2.8214 :
Emax = (2.8214)(8.617 ×10−5 eV/K)T = (2.4313 × 10−4 eV/K)T
Note that, using Equation 3.28,
hc
λmax
=
1240 eV ⋅ nm
= (4.2784 ×10−4 eV/K)T
−3
(2.8978 × 10 m ⋅ K)T
and thus Emax ≠ hc / λmax . This occurs because u(E) and u(λ) do not simultaneously reach
their maximum values. That is, when du / dE = 0, du / d λ ≠ 0 .
23.
We assume each copper atom contributes one free electron to the metal. The density of
copper atoms (and therefore of the free electrons) is
N ρ N A (8.95 g/cm 3 )(6.02 ×1023 atoms/mole)
=
=
= 8.48 × 1028 m −3
3
V
M
(63.5 g/mole)(1 m/100 cm)
h 2 ⎛ 3N ⎞
EF =
⎜
⎟
2m ⎝ 8π V ⎠
2/3
(hc) 2 ⎛ 3 N ⎞
=
⎜
⎟
2mc 2 ⎝ 8π V ⎠
2/3
(1240 eV ⋅ nm) 2 ⎛ 3(8.48 × 1028 m −3 ) ⎞
=
⎜
⎟
2(0.511× 106 eV) ⎝ 8π (109 nm/m)3 ⎠
2/3
= 7.04 eV
Em = 53 EF = 53 (7.04 eV) = 4.22 eV
24.
ρ NA
N
= (2 electrons/atom)
V
M
= (2 / atom)
h2 ⎛ 3N ⎞
EF =
⎜
⎟
2m ⎝ 8π V ⎠
2/3
(hc) 2 ⎛ 3 N ⎞
=
⎜
⎟
2mc 2 ⎝ 8π V ⎠
2/3
(1.74 g/cm 3 )(6.02 × 1023 atoms/mole)
= 8.62 × 1028 m
3
(24.3 g/mole)(1 m/100 cm)
(1240 eV ⋅ nm) 2 ⎛ 3(8.62 × 1028 m −3 ) ⎞
=
⎜
⎟
2(0.511×106 eV) ⎝ 8π (109 nm/m)3 ⎠
216
2/3
= 7.12 eV
25.
(a) At 295 K, kT = (8.617 × 10−5 eV/K)(295 K) = 0.0254 eV .
N ( E )dE 8π 2m3/ 2 1/ 2
1
8π 2(mc 2 )3/ 2 E1/ 2 dE
=
E
dE =
V
h3
e( E − EF ) / kT + 1
(hc)3
e( E − EF ) / kT + 1
=
8π 2(0.511×106 eV)3/2
(5.00 eV)1/2 (0.10 eV)
= 4.37 × 10−36 m −3
3
3 (5.00 eV − 3.00 eV)/(0.0254 eV)
−9
+1
(1240 eV ⋅ nm) (10 m/nm) e
(b) At 2500 K, kT = (8.617 × 10−5 eV/K)(2500 K) = 0.215 eV .
N ( E )dE 8π 2m3/ 2 1/ 2
1
8π 2(mc 2 )3/ 2 E1/ 2 dE
=
=
E
dE
V
h3
e( E − EF ) / kT + 1
(hc)3
e( E − EF ) / kT + 1
=
26.
1
Em =
N
∫
∞
0
8π 2(0.511× 106 eV)3/2
(5.00 eV)1/2 (0.10 eV)
= 6.00 ×10−6 m −3
(1240 eV ⋅ nm)3 (10−9 m/nm)3 e(5.00 eV −3.00 eV)/(0.215 eV) + 1
1 8π 2m3/ 2
E N ( E ) dE = V
N
h3
1 8π 2m3/ 2
= V
N
h3
3 h 2 ⎛ 3N ⎞
=
⎜
⎟
5 2m ⎝ 8π V ⎠
∫
EF
0
2/3
=
∫
∞
0
E 3/ 2
1
e
( E − EF ) / kT
+1
dE
1 8π 2m3/ 2 2 5/2 1 8π 2m3/ 2 2 ⎛ h 2 ⎞
E dE = V
EF = V
⎜
⎟
N
h3
5
N
h3
5 ⎝ 2m ⎠
3/ 2
5/ 2
⎛ 3N ⎞
⎜
⎟
⎝ 8π V ⎠
5/3
3
EF
5
27. (a) Repeating the derivation of Section 10.7, we have, for a star of mass M = Nmn
(where mn is the mass of a neutron)
Egrav = −
3 GM 2
3 GN 2 mn2
=−
5 R
5 R
and
Eneut
3
3
h 2 ⎛ 3N ⎞
= NEm = NEF = N
⎜
⎟
5
5 2mn ⎝ 8πV ⎠
E = Egrav + Eneut
2/3
3
h 2 ⎛ 3N ⎞
= N
⎜
⎟
5 2mn ⎝ 8π 43 π R 3 ⎠
2/3
3
h2 1 ⎛ 9N ⎞
= N
⎜
⎟
5 2mn R 2 ⎝ 32π 2 ⎠
3 GN 2 mn2 3
h2 1 ⎛ 9N ⎞
=−
+ N
⎜
⎟
5 R
5 2mn R 2 ⎝ 32π 2 ⎠
217
2/3
2/3
The minimum radius is found by setting dE/dR to zero:
dE 3 GN 2 mn2 3
h 2 ⎛ −2 ⎞ ⎛ 9 N ⎞
=
+ N
⎜ ⎟⎜
⎟
5 2mn ⎝ R 3 ⎠ ⎝ 32π 2 ⎠
dR 5 R 2
2/3
=0
Solving, we obtain
R=
h2
⎛ 9 ⎞
⎟
1/ 3 3 ⎜
GN mn ⎝ 32π 2 ⎠
2/3
(b) For M = 3M Sun = 3(2.00 × 1030 kg) = 6.00 × 1030 kg , we have
N = M / mn = 6.00 × 1030 kg/1.67 × 10−27 kg = 3.6 × 1057 . Then
R=
h2
⎛ 9 ⎞
⎟
1/ 3 3 ⎜
GN mn ⎝ 32π 2 ⎠
2/3
=
(6.67 ×10−11
(6.626 × 10−34 J ⋅ s) 2
⎛ 9 ⎞
⎟
2
2
57 1/ 3
3 ⎜
−27
N ⋅ m /kg )(3.6 × 10 ) (1.67 × 10 kg) ⎝ 32π 2 ⎠
2/3
which evaluates to 8.6 km.
(c) The density is
ρ=
M 6.00 × 1030 kg
= 4
= 2.2 × 1018 kg/m 3
3
π
V
(8600
m)
3
This unimaginably large density is comparable to the central density of an atomic
nucleus!
28.
(a) For M = 2 M Sun = 2(2.00 × 1030 kg) = 4.00 × 1030 kg , the number of neutrons would
be N = M / mn = 4.00 × 1030 kg/1.67 × 10−27 kg = 2.4 × 1057 . The Fermi energy is
h 2 ⎛ 3N ⎞
EF =
⎜
⎟
2mn ⎝ 8πV ⎠
2/3
6.626 × 10−34 J ⋅ s ⎛ 3(2.4 × 1057 ) ⎞
=
⎜
⎟
2(1.67 × 10−27 kg) ⎝ 8π 43 π (1 × 104 )3 ⎠
2/3
= 140 MeV
This is smaller than the rest energy of the neutron (940 MeV), but not negligibly smaller.
We probably don’t make too large an error by using the nonrelativistic kinetic energy to
compute the Fermi energy, but for larger stars relativistic effects should become
important.
(b) The de Broglie wavelength is (again assuming nonrelativistic energy and momentum)
λ=
1240 MeV ⋅ fm
h
h
hc
=
=
=
= 2.4 fm
2
p
2mE
2(940 MeV)(140 MeV)
2mc E
218
The radius of this neutron star would be
h2
⎛ 9 ⎞
R=
⎟
1/ 3 3 ⎜
GN mn ⎝ 32π 2 ⎠
2/3
=
(6.626 ×10−34 J ⋅ s) 2 (9 / 32π 2 )2 / 3
= 9.8 km
(6.67 × 10−11 N ⋅ m 2 /kg 2 )(2.4 × 1057 )1/ 3 (1.67 × 10−27 kg)3
giving a neutron density of N / V = (2.4 × 1057 ) /( 43 π )(9.8 ×103 m)3 = 6.1×1044 m −3 and thus
an average particle spacing of ( N / V ) −1/ 3 = 1.18 fm . The de Broglie wavelength is much
larger than the particle spacing, meaning that neighboring neutrons lie within each other’s
wave packets and so quantum effects are very important.
29. The density of the 3He atoms is (0.05)(2.2 × 1028 m −3 ) = 1.1× 1027 m −3 . With m = 3.02 u
and an effective mass 2.5 times as large, we have for the Fermi energy
h2 ⎛ 3N ⎞
EF =
⎜
⎟
2m ⎝ 8π V ⎠
2/3
h2c 2 ⎛ 3N ⎞
=
⎜
⎟
2mc 2 ⎝ 8π V ⎠
2/3
(1240 eV ⋅ nm) 2 (10−9 m/nm) 2 ⎛ 3
−3 ⎞
27
=
⎜ 1.1× 10 m ⎟
6
(2)(2.5)(3.02 u)(931.5 ×10 eV/u) ⎝ 8π
⎠
2/3
= 2.83 × 10−5 eV
0.50 mole of 4He is 3.0 × 1023 atoms, so a 5% solution would have 1.5 × 1022 atoms of
3
He. The heat capacity is then
C=
30.
π 2 k 2 NT
2 EF
=
π 2 (1.38 ×10−23 J/K) 2 (1.5 ×1022 )(0.025 K)
2(2.83 ×10 −5 eV)(1.6 × 10−19 J/eV)
= 0.078 J/K
The particles with s = 2 can have ms = +2, +1, 0, −1, −2. The maximum value of the total
M S = ms1 + ms 2 is +4, for which we can have only ms1,ms2 = +2,+2. With MS = +3, we
can have ms1,ms2 = +2,+1 (but we cannot list +1,+2 as a separate microstate because the
particles are indistinguishable). For MS = +2 we have ms1,ms2 = +2,0 or +1,+1. For MS =
+1, ms1,ms2 = +1,0 or +2,−1, and for MS = 0, ms1,ms2 = +2,−2 or +1,−1 or 0,0. For
negative values of MS we get the same number of microstates as the positive values, with
all plus signs becoming minus signs and minus signs becoming plus signs. So instead of
the 25 microstates that would characterize distinguishable particles, we have 15
microstates. The 9 states with MS = +4,+3,+2,+1,0,−1,−2,−3,−4 must go with S = 4.
There are no addition microstates with MS = ±3, so we cannot have a state with S = 3.
The remaining 6 microstates have MS = +2,+1,0,0,−1,−2. Five of them (+2,+1,0,−1,−2)
can be assigned to go with S = 2, and the remaining MS = 0 state must go with S = 0.
This situation commonly arises in nuclear excited states, which can be treated as
vibrational states in analogy with molecular vibrations. The vibrations behave as if they
have two units of angular momentum. The first excited state has one of these vibrational
quanta and thus has 2 units of angular momentum. At about twice the energy of the first
excited state there is often a triplet of states with angular momentum 0,2,4.
219
31.
(a) Let E1 = 0, E2 = E . The states are nondegenerate, so d1 = 1 and d 2 = 1 . If N1 and N2
are respectively the number of atoms with energies E1 and E2, then
N 2 d 2 f MB ( E2 )
=
= e − ( E2 − E1 ) / kT = e − E / kT
N1 d1 f MB ( E1 )
N1 E1 + N 2 E2 E1 + ( N 2 / N1 ) E2 0 + Ee − E / kT
E
(b) Em =
=
=
= E / kT
− E / kT
N1 + N 2
1 + N 2 / N1
1+ e
e
+1
(c) Etotal = N1 E2 + N 2 E2 = NEm =
NE
+1
e
E / kT
(d) Assume N = N A (corresponding to one mole of the atoms)
2
dEtotal
1
d ⎛
−1
e E / kT
⎞
⎛ E E / kT ⎞
⎛ E ⎞
C=
= NA E
e
⎜
⎟ = N A E E / kT
⎜−
⎟ = R⎜
⎟ E / kT
(e
dT
dT ⎝ e E / kT + 1 ⎠
+ 1) 2 ⎝ kT 2
+ 1) 2
⎠
⎝ kT ⎠ (e
32. (a) At height h, E = K + mgh , so the ratios of the energy distributions would be
N ( E2 ) g ( E2 ) e − E2 / kT e − ( K + mgh ) / kT
=
=
= e − mgh / kT
− E1 / kT
− K / kT
N ( E1 ) g ( E1 ) e
e
(b) The density at height h is proportional to the number of molecules at that height, so
we expect
ρ ( h ) N ( E2 )
=
ρ (0) N ( E1 )
so
ρ (h ) = ρ 0
N ( E2 )
= ρ 0e − mgh / kT
N ( E1 )
(c) This simple model gives a surprisingly good account of the variation of density with
altitude, even though our assumption that the gas at all altitudes is in thermal equilibrium
at temperature T is not an accurate description of the atmosphere.
33.
(a) With μ = μB , we have ΔE = μB B = (9.27 × 10−27 J/T)(5.0 T) = 4.64 × 10−23 J for the
energy splitting of the ml states. Because the degeneracies of the ml states are identical,
the ratio of the number of atoms N ml with different values of the energy Eml is, for ml = 0
and ml = −1,
-23
−23
N0
d e − E0 / kT
= 0 − E−1 / kT = e − ( E0 − E−1 ) / kT = e −ΔE / kT = e − (4.64×10 J)/(1.38×10 J/K)(293 K) = 0.9886
N −1 d −1 e
220
Because the ml = +1 and ml = 0 states have the same energy splitting ΔE , the ratio of
their populations is the same: N +1 / N 0 = 0.9886 . The fraction of the atoms in any
particular state is the number in that state divided by the total number:
f ml =
N ml
N +1 + N 0 + N −1
so we have
f +1 =
N +1 / N 0
N +1
0.9886
=
=
= 0.3295
N +1 + N 0 + N −1 N +1 / N 0 + 1 + N −1 / N 0 0.9886 + 1 + 1/ 0.9886
f0 =
N0
1
1
=
=
= 0.3333
N +1 + N 0 + N −1 N +1 / N 0 + 1 + N −1 / N 0 0.9886 + 1 + 1/ 0.9886
f −1 = 1 − f +1 − f 0 = 0.3372
(b) The three normal Zeeman components represent the 2p → 1s transitions that begin in
the initial levels with ml = +1, 0, and −1. The relative intensities would then be
proportional to the populations of the initial substates. The lowest energy substate (ml =
−1) has the largest population and so has the largest relative intensity (0.3372). The next
substate (ml = 0) has the next highest population (0.3333), and so it has a smaller relative
intensity, and the transition from the n ml = +1 substate, which lies highest in energy, has
the smallest relative intensity (0.3295).
34. Consider a molecule of the liquid at the location x measured from the axis of rotation.
The apparent “centrifugal” force on it is F = mxω 2 . We assume that the forces in the
liquid that give rise to this force have an associated potential energy U(x),
where F = − dU / dx :
x
U = − ∫ F dx = − ∫ mxω 2dx = − 12 mω 2 x 2
0
where we take U = 0 at x = 0. The Maxwell-Boltzmann distribution then gives
2 2
ρ ( x ) N ( x ) emω x / 2 kT
=
=
= e mω x
ρ (0) N (0)
e0
2 2
2 2
and thus ρ ( x ) = ρ 0e mω x
/ 2 kT
/ 2 kT
with ρ 0 = ρ (0) .
35. At room temperature (293 K), kT = (8.617 × 10−5 eV/K)(293 K) = 0.02525 eV . With
EF = 3.15 eV for sodium, the distribution function has the value 0.9 where
221
f FD ( E ) =
1
e
( E − EF ) / kT
= 0.9
+1
e( E − EF ) / kT = 1/ 9
or
E − EF
= − ln 9
kT
and
E = EF − kT ln 9 = 3.15 eV − (0.02525 eV)(2.20) = 3.09 eV
The distribution function has the value 0.1 where
f FD ( E ) =
1
e
( E − EF ) / kT
+1
= 0.1
or
e( E − EF ) / kT = 9
and
E − EF
= ln 9
kT
E = EF + kT ln 9 = 3.15 eV+(0.02525 eV)(2.20) = 3.21 eV
The energy difference is 3.21 eV − 3.09 eV = 0.12 eV, so the distribution is rather sharp.
The distribution changes from 90% full to 10% full within ±2% of the Fermi energy.
36.
For E = 1.89 eV and kT = 0.02525 eV (corresponding to T = 293 K), the Fermi-Dirac
distribution function is
f FD =
1
e
( E − EF ) / kT
+1
=
1
e
(1.89 eV −3.15 eV) / 0.02525 eV
+1
= 1.000
8π 2(mc 2 )3/ 2 1/2
dN N ( Em )dE 8π 2m3/ 2 1/2
=
=
=
(
)
E
f
E
dE
Em f FD ( Em )dE
m
FD
m
(hc)3
V
V
h3
=
37.
8π 2(0.511×106 eV)3/2
(1.89 eV)1/2 (0.0315 eV) = 2.95 × 1028 m −3
(1240 eV ⋅ nm)3 (10−9 m/nm)3
The volume of the nucleus is V = 43 π R 3 = 43 π (7.4 fm)3 = 1697 fm3 . The number of
protons per unit volume is N / V = 92 /1697 fm3 = 0.0542 fm −3 . The Fermi energy of the
protons is
EF =
h2 ⎛ 3N ⎞
⎜
⎟
2m ⎝ 8π V ⎠
2/3
=
(hc) 2 ⎛ 3 N ⎞
⎜
⎟
2mc 2 ⎝ 8π V ⎠
2/3
=
(1240 MeV ⋅ fm) 2 ⎛ 3
⎞
0.0542 fm −3 ⎟
⎜
2(938.3 MeV) ⎝ 8π
⎠
2/3
= 28.5 MeV
Em = 53 EF = 53 (28.5 MeV) = 17.1 MeV
For the neutrons, N / V = 143 /1697 fm3 = 0.0843 fm −3
h2 ⎛ 3N ⎞
EF =
⎜
⎟
2m ⎝ 8π V ⎠
2/3
(hc) 2 ⎛ 3 N ⎞
=
⎜
⎟
2mc 2 ⎝ 8π V ⎠
2/3
(1240 MeV ⋅ fm) 2 ⎛ 3
⎞
=
0.0843 fm −3 ⎟
⎜
2(939.6 MeV) ⎝ 8π
⎠
222
2/3
= 38.1 MeV
Em = 53 EF = 53 (38.1 MeV) = 22.9 MeV
38.
(a) The gravitational potential energy of two uniform spherical objects of masses m1 and
m2 is U = −Gm1m2 / r , where r is the distance between their centers. When the separation
is infinite, the initial potential energy is zero. When mass dm is brought from an infinite
separation to the surface of the spherical mass m, the final potential energy is
dU = −G
m dm
( ρ 4 π r 3 )dm
= −G 3
= − 43 π G ρ r 2 dm
r
r
(b) The total mass brought in from infinity is in the spherical shell of radius r, surface
area 4π r 2 , and volume dV = 4π r 2 dr . Its mass is dm = ρ dV = 4πρ r 2dr , and the
corresponding change in potential energy is
dU = − 43 π G ρ r 2 (4πρ r 2dr ) = − 163 π 2G ρ 2 r 4dr
(c)To assemble the entire sphere from r = 0 to r = R, we have
2
R
⎛ M ⎞ R5
16
16
R5
16
3 GM 2
U = ∫ dU = − π 2G ρ 2 ∫ r 4 dr = − π 2G ρ 2
= − π 2G ⎜ 4
=
−
3 ⎟
0
3
3
5
3
5 R
⎝ 3πR ⎠ 5
39.
(a) When the Sun becomes a white dwarf star, the number of alpha particles in it will be
MSun/mα = 1.99 × 1030 kg/6.64 × 10−27 kg = 3.00 × 1056. The number of electrons is twice
this number, so N = 6.00 ×1056 . Its radius will be
h2
R=
GN 1/ 3 me mα2
=
⎛ 9 ⎞
⎜ 2⎟
⎝ 4π ⎠
(6.67 × 10−11
2/3
(6.626 × 10−34 J ⋅ s) 2
⎛ 9 ⎞
⎟
−31
−27
2
2
56 1/ 3
2 ⎜
N ⋅ m /kg )(6.00 ×10 ) (9.11× 10 kg)(6.64 × 10 kg) ⎝ 4π 2 ⎠
= 7.28 × 106 m
The Fermi energy is
h 2 ⎛ 3N ⎞
EF =
⎜
⎟
2m ⎝ 8π V ⎠
2/3
(hc) 2 1 ⎛ 9 N ⎞
=
⎜
⎟
2mc 2 R 2 ⎝ 32π 2 ⎠
2/3
(1240 eV ⋅ nm)2 (10−9 m/nm) 2 ⎛ 9(6.00 ×1056 ) ⎞
=
⎜
⎟
2(0.511× 106 eV) (7.28 × 106 m)2 ⎝
32π 2
⎠
2/3
Using nonrelativistic mechanics, the de Broglie wavelength is
223
= 1.88 ×105 eV
2/3
λ=
1240 eV ⋅ nm
h
h
hc
=
=
=
= 2.83 × 10−3 nm
2
6
5
p
2mE
2mc E
2(0.511×10 eV)(1.88 × 10 eV)
(b) The star contains 6.00 × 1056 electrons in a volume V = 43 π R 3 = 43 π (7.28 ×106 m)3
= 1.62 × 1021 m3, so the particle density is N/V = 6.00 × 1056/1.62 × 1021 m3 = 3.70 × 1035
m−3. The average distance between particles is ( N / V ) −1/ 3 = 1.39 × 10−3 nm . The de
Broglie wavelength is larger than the spacing between the electrons, which means that
quantum effects are indeed important.
40. (a) In a magnetic field, a state with spin 5 splits into 11 substates with S z = M S (MS =
+5, +4, +3, …, −4, −5). The magnetic energy of the substate MS is
EM S = −μ ⋅ B = γ BS ⋅ k = γ BS z = γ B M S . The lowest state (MS = −5) has energy
E−5 = −5γ B and the second lowest state (MS = −4) has energy E−4 = −4γ B . The ratio
of the populations N M S is (with nondegenerate substates)
r=
N −4 d −4 e − E−4 / kT e 4γ B
=
=
N −5 d −5e− E−5 / kT e5γ B
/ kT
= e−γ B
/ kT
/ kT
With ln r = −γ B / kT , we have
T =−
(b)
γB
k ln r
r=
=−
(3.64 ×107 T −1s −1 )(29.0 T)(1.055 ×10−34 J ⋅ s)
= 0.00925 K
(1.38 ×10−23 J/K)ln(0.418)
N0
d e − E0 / kT
e0
= 0 − E−5 / kT = 5γ B / kT = e −5γ B
N −5 d −5e
e
/ kT
= e −5(3.64×10
41.
7
T −1s −1 )(29 T)(1.055×10−34 J ⋅s)/(1.38×10−23 J/K)(0.00925 K)
(a) The degeneracies of the rotational states are 2L + 1, so the ratio of the populations of
the L = 1 and L = 0 states is
r10 =
T=
N1 d1e − E1 / kT
=
= 3e − ( E1 − E0 ) / kT = 3e −ΔE / kT
− E0 / kT
N 0 d0e
−ΔE
−4.71× 10−4 eV
=
= 2.78 K
k ln(r10 / 3) (8.617 ×10−5 eV/K)ln(0.421/3)
The uncertainties can be analyzed by taking differentials of the first equation, which
gives dr10 = 3e −ΔE / kT (ΔE / kT 2 )dT = r10 (ΔE / kT 2 )dT :
224
= 0.0128
dT =
dr10 kT 2 0.017 (8.617 ×10−5 eV/K)(2.78 K) 2
=
= 0.06 K
r10 ΔE 0.421
4.71× 10−4 eV
so the deduced temperature is 2.78 ± 0.06 K.
(b) The second excited rotational state has L = 2. Because the energy of the rotational
states is proportional to L(L+1), this state has 3 times the energy of the first excited state:
−4
−5
N 2 d 2 e − E2 / kT
=
= 5e − ( E2 − E0 ) / kT = 5e −3ΔE / kT = 5e −3(4.71×10 eV)/ (8.617×10 eV/K)(2.78 K) = 0.0137
r20 =
− E0 / kT
N0 d0e
The range of ±0.06 K in temperature corresponds to a range of ±0.0017 in r20, so this
ratio is in very good agreement with the observed value.
225
Chapter 11
This chapter discusses several properties of solids in the context of applying
quantum statistics and thus demonstrating the importance of quantum theory in studying
condensed matter. The previous editions of this text included only applications to
electrical conduction in solids, primarily that of semiconductors. In the present edition,
the coverage of electrical conduction has been reduced somewhat in order to add
discussions of the heat capacity of solids and paramagnetism. In both cases, theoretical
formalisms have been coupled with analysis of actual experimental data, emphasizing the
success of the interpretation based on quantum theory.
Suggestions for Additional Reading
More detailed and comprehensive books on solid-state physics:
R. H. Bube, Electrons in Solids: An Introductory Survey, 3rd ed. (Academic Press, 1992).
J. R. Christman, Fundamentals of Solid State Physics (Wiley, 1988).
A. J. Dekker, Solid State Physics (Prentice-Hall, 1957).
A. Hart-Davis, Solids: An Introduction (McGraw-Hill, 1975).
C. Kittel, Introduction to Solid State Physics, 7th ed. (Wiley, 1996).
H. P. Myers, Introductory Solid State Physics (Taylor and Francis, 1990).
M. N. Rudden and J. Wilson, Elements of Solid State Physics, 2nd ed. (Wiley, 1993).
H. M. Rosenberg, The Solid State, 3rd ed. (Oxford, 1988).
R. T. Sanderson, Chemical Bonds and Bond Energy (Academic Press, 1976).
R. Turton, The Physics of Solids (Oxford, 2000).
High-temperature superconductors are discussed in R. J. Cava, “Superconductors beyond
1-2-3,” Scientific American 263, 42 (August 1990).
Bulk properties of solids are tabulated in many references, including the Handbook of
Chemistry and Physics (Chemical Rubber Publishing Co.) and the American Institute of
Physics Handbook (McGraw-Hill, 1963).
Materials for Active Engagement in the Classroom
A. Reading Quizzes
1. At the lowest temperatures, the molar heat capacity of metals can be explained
primarily by the application of:
(1) the equipartition theorem
(2) Fermi-Dirac statistics of electrons
(3) Bose-Einstein statistics of vibrating atoms
226
2. Which of the following processes can produce a substantial increase in the electrical
conductivity of a semiconductor?
(1) Lower the temperature.
(2) Add certain impurities.
(3) Both 1 and 2.
(4) Neither 1 nor 2.
3. How does the electrical conductivity of a semiconductor depend on the temperature?
(1) The conductivity increases as the temperature increases.
(2) The conductivity decreases as the temperature increases.
(3) The conductivity does not depend on the temperature.
Answers
1. 3
2. 2
3. 1
B. Conceptual or Discussion Questions
1. Put these types of solids in order of increasing values of typical melting points:
(1) ionic
(2) covalent (3) metallic (4) molecular
2. Classify the following materials as:
(1) Conductor (2) Insulator (3) Semiconductor
(4) Conductor and insulator
(5) Conductor and semiconductor
(6) Insulator and semiconductor
(7) Conductor, insulator, and semiconductor
(8) None of these
(a) Filled valence band, empty conduction band, energy gap = 8 eV.
(b) Filled valence band, empty conduction band, energy gap = 1 eV.
(c) Half-filled valence band, empty conduction band, energy gap = 1 eV.
(d) The Fermi energy is located in the gap between the valence and conduction bands.
(e) The electrical resistance decreases significantly as the temperature is lowered.
3. In an intrinsic semiconductor, the number of electrons in the conduction band is
_______ the number of holes in the valence band.
(1) exactly equal to
(2) approximately equal to
(3) much greater than
(4) much less than
4. In an intrinsic semiconductor, the contribution of the electrons to the current is usually
_______ the contribution of the holes to the current.
(1) exactly equal to
(2) approximately equal to
(3) much greater than
(4) much less than
5. In a p-type semiconductor, the number of electrons in the conduction band is _______
the number of holes in the valence band.
(1) exactly equal to
(2) approximately equal to
(3) much greater than
(4) much less than
6. In a p-type semiconductor, the contribution of the electrons to the current is usually
_______ the contribution of the holes to the current.
(1) exactly equal to
(2) approximately equal to
(3) much greater than
(4) much less than
227
Answers
1. 4,3,2,1
2. (a) 2 (b) 3 (c) 1 (d) 6 (e) 1
3. 1
4. 3
5. 4
6. 4
Sample Exam Questions
A. Multiple Choice
1. In the range from 100 K to 200 K, the temperature variation of the molar heat
capacity of metals is best explained in terms of
(a) the equipartition theorem
(b) Fermi-Dirac statistics of electrons
(c) Bose-Einstein statistics of lattice vibrations
2. An intrinsic semiconductor at room temperature has:
(a) a greater density of electrons in its conduction band than holes in its valence band.
(b) a greater density of electrons in its conduction band than electrons it its valence band.
(c) a greater density of electrons in its valence band than it would at a temperature of 0 K.
(d) a greater density of holes in the valence band than it would at a temperature of 0 K.
3. In a certain intrinsic semiconductor, the probability for electron states at the bottom of
the conduction band to be occupied at room temperature (300 K) is 1.0 × 10−10. What
would be the probability for these electron states to be occupied if the temperature
were raised to 330 K?
(b) 1.2 × 10−11
(c) 1.1 × 10−10
(d) 2.4 × 10−9 (e) 9.0 × 10−11
(a) 8.1 × 10−10
4. In a certain intrinsic (undoped) semiconducting material, the occupation probability
near the bottom of the conduction band at room temperature (300 K) is 10-9. If the
temperature is raised to 390 K, what would you estimate to be the new occupation
probability near the bottom of the conduction band?
(c) 10-8
(d) 10-7
(e) 10-6
(a) 10-10 (b) 10-9
5. A piece of silicon contains a small amount of an impurity that forms states located in
the energy gap very close to the edge of the valence band. What category would best
describe this material?
(a) insulator
(b) p-type semiconductor
(c) n-type semiconductor
(d) intrinsic semiconductor
(e) conductor
6. A certain semiconductor has an energy gap of about 1 eV and a certain insulator has
an energy gap of about 6 eV. Which of these would you expect to be transparent to
all visible light?
(a) semiconductor
(b) insulator
(c) both
(d) neither
7. A certain intrinsic (undoped) semiconducting material has an energy gap of 1.6 eV
between the valence and conducting bands. What is the approximate probability to
find electrons at the bottom of the conduction band at room temperature (300 K)?
(c) 10-14
(d) 10-16
(e) 10-18
(a) 10-10 (b) 10-12
228
Answers
1. c
2. d
3. a
4. d
5. b
6. c
7. c
B. Conceptual
1. A certain insulator has an energy gap of 6.0 eV. When visible light (400 to 700 nm)
shines on this material, would you expect the light to be strongly absorbed (so the
material would be opaque) or not absorbed (so that the material would be
transparent)? EXPLAIN YOUR ANSWER.
2. Suppose we raise the temperature of a semiconductor from room temperature (20°C
or about 300 K) to the temperature of hot tap water (40°C or about 320 K). Would
you expect the electrical conductivity to increase or decrease, and would you expect
the change in electrical conductivity to be large or small? EXPLAIN YOUR
ANSWER.
3. In a certain intrinsic (undoped) semiconductor, the Fermi energy at the absolute zero
of temperature is at the middle of the gap between the valence band and the
conduction band. The temperature is now raised to a value in the neighborhood of
room temperature. At this temperature, it is found that there are Ne empty states in
the valence band. At this temperature, is the number of filled states in the conduction
band greater than Ne, less than Ne, or equal to Ne? EXPLAIN YOUR ANSWER.
Answers
1. not absorbed
2. increase, large
3. equal to
C. Problems
1. In a certain conducting material at T = 0 K, all of the electron energy levels below
3.15 eV are filled, and all of the levels above 3.15 eV are empty. The material is now
heated to a temperature of 120 K. Consider electrons with energies in a small interval
dE around E1 = 3.10 eV and also electrons with energies in a small interval dE around
E2 = 3.20 eV. Find the ratio of the probabilities to find electrons in these two
intervals.
2. In a certain semiconductor, the energy gap is 1.10 eV and the Fermi energy is at the
center of the gap.
(a) What is the probability that a state at the bottom of the conduction band is
occupied at room temperature (300 K)?
(b) What is the probability that a state at the top of the valence band is empty at room
temperature?
(c) What is the probability that a state at the bottom of the conduction band is
occupied at 0 K?
Answers
1. 0.0079
2. (a) 5.76 × 10−10 (b) 5.76 × 10−10 (c) 0
229
Problem Solutions
1. (a) 1/8
(b) If the spheres are in contact along each edge of the cube, then a = 2r .
(c) With Vcube = a 2 = (2r )3 and Vspheres = 8 × 18 × 43 π r 3 , the packing fraction is
packing fraction =
Vspheres
4
3
=
Vcube
π r3
8r
3
=
π
6
= 0.5236
2. (a) In the fcc lattice, inside the basic cube there is 1/8 of a sphere at each of the 8 corners
and 1/2 of a sphere at each of the 6 faces. Thus Vspheres = ( 8 × 18 + 6 × 12 ) 34 π r 3 = 163 π r 3 . The
diagonal along any face of the cube has length a 2 , where a is the length of an edge of
the cube. The spheres are in contact along one of these diagonals, so a 2 = 4r ,
and Vcube = a 3 = (4r / 2)3 = 16 2r 3 . The packing fraction is
packing fraction =
Vspheres
Vcube
=
16
3
π r3
16 2r
3
=
π
3 2
= 0.7405
(b) In the bcc lattice, inside the basic cube there is a full sphere at the center and 1/8 of a
sphere at each of the 8 corners, so Vspheres = ( 8 × 18 + 1) 43 π r 3 = 83 π r 3 . The body diagonal has
length a 3 . The spheres are in contact along the body diagonal, so a 3 = 4r , and
Vcube = a 3 = (4r / 3)3 = 64r 3 / 3 3 . The packing fraction is
packing fraction =
Vspheres
Vcube
=
8
3
π r3
3
64r / 3 3
=
π 3
8
= 0.6802
The fcc arrangement allows for more dense packing of the spheres (and both fcc and bcc
are more efficient packing schemes than the simple cubic).
3. Starting with E = −α
e2 1 A
+
, we take the derivative to obtain:
4πε 0 R R n
dE
e2 1
nA
=α
− n +1 = 0 at
2
dr
R
4πε 0 R
With α
1
nA
e 2 R0n −1
=
=
α
and so
we
get
A
4πε 0 R02 R0n +1
4πε 0 n
e2
230
R = R0
n −1
e 2 R0n −1 1
e2 1
α e2 ⎡ 1 ⎛ R0 ⎞ ⎤
E = −α
+α
=−
⎢1 − ⎜ ⎟ ⎥
4πε 0 R
4πε 0 n R n
4πε 0 R ⎣⎢ n ⎝ R ⎠ ⎦⎥
The binding energy is
α e2 ⎛ 1 ⎞
B = − E ( R0 ) =
⎜1 − ⎟
4πε 0 R0 ⎝ n ⎠
4. In the CsCl (bcc) structure, a Cs+ ion at the center of a cube is surrounded by 8 Cl− ions at
a distance R. With a as the length of a cube edge, the distance R is half the body diagonal
a 3 , so a = 2 R / 3 . At this distance from each Cs+ ion, there are 6 Cs+ ions, each at
the center of an adjacent cube. At the 4 far corners of each of the 6 adjacent cubes there
is a total of 24 Cl− ions at a distance of (a 2 / 2) 2 + (3a / 2) 2 = a 11/ 4 = R 11/ 3 . The
potential energy due to these three terms is
U = −8
5. (a)
(b)
B=
1
1
24 3 ⎞
e2 1
e2
e2
e2 ⎛
+6
− 24
=−
⎜⎜ 8 − 3 3 +
⎟
4πε 0 R
4πε 0 2 R 3
4πε 0 R 11/ 3
4πε 0 R ⎝
11 ⎟⎠
Ecoh
657 ×103 J/mole
=
= 6.82 eV
N A (6.02 ×1023 ions/mole)(1.60 ×10 −19 J/eV)
α e2 ⎛ 1 ⎞ (1.7627)(1.440 eV ⋅ nm) ⎛
1 ⎞
B=
⎜1 − ⎟ =
⎜1 −
⎟ = 6.45 eV
4πε 0 R0 ⎝ n ⎠
0.356 nm
⎝ 10.5 ⎠
(c) To find the binding energy per atom pair, we start with the binding energy per ion
pair, add the electron affinity of Cl, and subtract the ionization energy of Cs: 6.82 eV +
3.61 eV − 3.89 eV = 6.54 eV. The binding energy per atom is half this value, or 3.27 eV.
6. (a)
(b)
B=
Ecoh
1030 ×103 J/mole
=
= 10.69 eV
N A (6.02 × 1023 ions/mole)(1.60 ×10−19 J/eV)
α e2 ⎛ 1 ⎞ (1.7476)(1.440 eV ⋅ nm) ⎛ 1 ⎞
B=
⎜1 − ⎟ =
⎜1 − ⎟ = 10.43 eV
4πε 0 R0 ⎝ n ⎠
0.201 nm
⎝ 6⎠
(c) To find the binding energy per atom pair, we start with the binding energy per ion
pair, add the electron affinity of F, and subtract the ionization energy of Li: 10.69 eV +
3.45 eV − 5.39 eV = 8.75 eV. The binding energy per atom is half this value, or 4.38 eV.
7.
U C = −α
1
1.440 eV ⋅ nm
= −1.7476
= −8.96 eV
4πε 0 R0
0.281 nm
e2
231
UR =
A
α e2
1
1
=
= (−U C ) = (8.96 eV) = 1.00 eV
n
R0 4πε 0 R0 n n
9
8. The density of atoms is
ρ NA
(0.971 g/cm3 )(6.02 × 1023 atoms/mole)
n=
=
= 2.54 × 1028 atoms/m3
2
3
M
(23.0 g/mole)(1 m/10 cm)
In the bcc structure, each basic cell contains 2 atoms: 1/8 atom at each of the 8 corners
and one at the center of the cube. If a is the length of one edge of the cube, then
2 atoms / a 3 = 2.54 ×1028 atoms/m3 , or
1/ 3
2 atoms
⎛
⎞
a=⎜
28
3 ⎟
⎝ 2.54 ×10 atoms/m ⎠
= 4.29 × 10−10 m = 0.429 nm
The body diagonal has length a 3 , so the atomic spacing is 12 a 3 = 0.371 nm .
9.
The density of atoms is
n=
ρ NA
M
=
(8.96 g/cm 3 )(6.02 × 1023 atoms/mole)
= 8.49 × 1028 atoms/m3
(63.5 g/mole)(1 m/102 cm)3
In the fcc structure, each basic cell contains 4 atoms: 1/8 atom at each of the 8 corners
and 1/2 atom at the center of each of the 6 faces. If a is the length of one edge of the
cube, then 4 atoms / a 3 = 8.49 ×1028 atoms/m3 , or
1/ 3
4 atoms
⎛
⎞
a=⎜
28
3 ⎟
⎝ 8.49 × 10 atoms/m ⎠
= 3.61×10−10 m = 0.361 nm
The face diagonal has length a 2 , so the atomic spacing is 12 a 2 = 0.255 nm .
10.
Na:
B=
Ecoh (107 × 103 J/mole)(1 eV/1.60 × 10−19 J)
=
= 1.11 eV
NA
6.02 × 1023 atoms/mole
Cu:
B=
Ecoh (337 ×103 J/mole)(1 eV/1.60 ×10−19 J)
=
= 3.50 eV
NA
6.02 ×1023 atoms/mole
11. Equating the electronic (Equation 11.9) and lattice (Equation 11.12) contributions to the
heat capacity gives
232
12π 4 ⎛ T ⎞
R=
R⎜ ⎟
2 EF
5
⎝ TD ⎠
π 2 kT
3
Solving for T, we obtain
5kTD3
5(8.617 × 10−5 eV/K)(343 K)3
T=
=
= 3.23 K
24π 2 EF
24π 2 (7.03 eV)
Above 3.23 K, the lattice contribution to the heat capacity is larger than the electronic
contribution, but below 3.23 K the electronic contribution is larger.
12.
(a) From Equation 11.12,
1/ 3
⎛ 12π 4 R ⎞
TD = T ⎜
⎟
⎝ 5C ⎠
⎡12π 4 (8.31 J/mole ⋅ K) ⎤
= (2.00 K) ⎢
⎥
⎣ 5(0.0200 J/mole ⋅ K) ⎦
1/ 3
= 91.9 K
(b) The heat capacity should increase as T 3, so the heat capacity at 3.00 K should be
greater than the heat capacity at 2.00 K by the factor (3.00 K/2.00 K)3 = 3.375 . The heat
capacity at 3.00 K is therefore (2.00 ×10−2 J/mole ⋅ K)(3.375) = 6.75 × 10−2 J/mole ⋅ K .
13. From Equation 11.12, the slope b is 12π 4 R / 5TD3 , so
1/ 3
⎛ 12π 4 R ⎞
TD = ⎜
⎟
⎝ 5b ⎠
⎡ 12π 4 (8.31 J/mole ⋅ K) ⎤
=⎢
−3
4 ⎥
⎣ 5(2.57 ×10 J/mole ⋅ K ) ⎦
1/ 3
= 91.1 K
14. (a) The lattice contribution to the heat capacity at 4 K is
3
3
12π 4 R ⎛ T ⎞ 12π 4 (8.31 J/mole ⋅ K) ⎛ 4 K ⎞
C=
⎜ ⎟ =
⎜
⎟ = 0.0109 J/mole ⋅ K
5 ⎝ TD ⎠
5
⎝ 225 K ⎠
The electronic contribution is then 0.0134 J/mole⋅K − 0.0109 J/mole⋅K = 0.0025
J/mole⋅K.
(b) The lattice contribution to the heat capacity is proportional to T 3, so at 2 K it is
smaller by (2 K/4 K)3 = 0.125 and thus 0.125(0.0109 J/mole ⋅ K) = 0.00136 J/mole ⋅ K .
The electronic contribution is proportional to T and so at 2 K its value is reduced by half,
to 0.00125 J/mole⋅K. The total heat capacity at 2 K is 0.00136 J/mole⋅K + 0.00125
J/mole⋅K = 0.00261 J/mole⋅K.
233
f FD ( E ) =
15. (a)
1
e
( E − EF ) / kT
+1
= 0.1
e( E − EF ) / kT + 1 = 10
so
E − EF
= ln 9
kT
At room temperature (293 K), kT = (8.617 × 10−5 eV/K)(293 K) = 0.0252 eV , so
E = EF + kT ln 9 = 7.03 eV + (0.0252 eV)(2.20) = 7.09 eV
(b) E − EF is 2.20 times kT, indicating the sharpness of the Fermi-Dirac distribution – it
drops from 0.9 to 0.1 within 4.40kT or about 0.11 eV.
16. An electron at the Fermi energy of 7.03 eV has momentum p = 2mE and de Broglie
wavelength
λ=
1240 eV ⋅ nm
h hc
hc
=
=
=
= 0.463 nm
2
p pc
2mc E
2(0.511×106 eV)(7.03 eV)
This is comparable to the atomic spacing of copper (0.256 nm).
17. From Equation 10.47 for the Fermi-Dirac distribution, with EF = 3.15 eV for sodium and
kT = (8.617 × 10−5 eV/K)(293 K) = 0.0252 eV ,
dN 8π 2(mc 2 )3/ 2 E1/ 2 dE
=
V
(hc)3
e( E − EF ) kT + 1
=
8π 2(0.511×106 eV)3/ 2 (3.25 eV)1/2 (0.01 eV)
= 2.3 × 1024 m −3
3
0.1 eV/0.0252 eV
+1
(1240 eV ⋅ nm)
e
18. Solving Equation 11.19 for τ, we obtain
τ=
σm
ne 2
=
(5.96 ×107 Ω −1m −1 )(9.11×10−31 kg)
= 2.50 × 10−14 s
28
3
−19
2
(8.49 × 10 atoms/m )(1.60 × 10 C)
Using the Fermi velocity of 1.57 × 106 m/s, the mean free path is
l = τ vF = (2.50 ×10−14 s)(1.57 × 106 m/s) = 39.2 nm
234
In terms of the atomic spacing of Cu (0.256 nm), this amounts to more than 150 lattice
spacings.
EF (T )
π 2 ⎛ kT ⎞
= 0.99 = 1 − ⎜
⎟
EF (0)
12 ⎝ EF (0) ⎠
19.
kT = EF (0)
12(1 − 0.99)
π
2
= (5.53 eV)
2
12(0.01)
π2
= 0.610 eV
T = (0.610 eV)/k = (0.610 eV)/(8.617 × 10−5 eV/K) = 7080 K
20. The current density (current per unit area) is
j = i / A = 2.5 × 10−3 A/π (0.00025 m) 2 = 1.27 × 104 A/m 2
and the drift velocity is
vd =
j
1.27 × 104 A/m 2
=
= 9.37 × 10−7 m/s
28
−3
−19
ne (8.49 × 10 m )(1.60 × 10 C)
The number of electrons in a narrow strip of width dE is dN = N ( E )dE . We’ll assume
that it is sufficient to evaluate N(E) at the Fermi energy because the strip is very narrow.
With dE = (dE / dv)dv = mv dv (evaluating dE/dv for E = 12 mv 2 ) we have
dN = N ( EF ) dE = N ( EF ) mv dv = N ( EF ) mvF vd
using dv = vd for the width of the strip as in Figure 11.16. We can show that
N ( EF ) = 1.5 N / EF , and so
dN 1.5mvFvd 1.5(9.11× 10−31 kg)(1.57 × 106 m/s)(9.37 × 10−7 m/s)
=
=
= 1.8 × 10−12
−19
N
EF
(7.03 eV)(1.602 ×10 J/eV)
Only a very small fraction of the electrons participates in the conduction.
21.
22.
K = Lσ T = (2.44 × 10−8 W ⋅ Ω/K 2 )(5.96 ×107 Ω −1 ⋅ m −1 )(293 K) = 426 W/K ⋅ m
The concentration is dependent on the Fermi-Dirac distribution, which is to be evaluated
at kT = (8.617 × 10−5 eV/K)(293 K) = 0.0252 eV . For states at the bottom of the
conduction band, E − EF = Eg / 2 and
235
1
e
( E − EF ) / kT
e
Eg / 2 kT
=
+1
1
e
+1
=
1
e
5.5 eV/2(0.0252 eV)
1
=
+1
1
Eg / 2 kT
1.1 eV/2(0.0252 eV)
e
+1
+1
= 4.0 × 10−48 for C
= 3.3 ×10−10 for Si
The ratio of the electron concentrations of C and Si is about 1.2 × 10−38.
23. At kT = (8.617 × 10−5 eV/K)(400 K) = 0.0345 eV the Fermi-Dirac distribution gives
1
e
( E − EF ) / kT
e
Eg / 2 kT
+1
1
+1
=
=
1
e
Eg / 2 kT
+1
=
1
e
0.66 eV/2(0.0345 eV)
1
1.12 eV/2(0.0345 eV)
e
+1
+1
= 7.0 ×10−5 for Ge
= 8.9 ×10−8 for Si
The Ge/Si ratio is about 790.
24.
(a) The cube has a volume of (0.10 cm)3 = 1.0 × 10−3 cm3 and thus a mass of 2.3 × 10−3 g,
so N = (2.3 × 10−3 g)/(28 g/mole)(6.02 × 1023 atoms/mole) = 5.0 ×1019 atoms . The
number of states in the valence band is 4N = 2.0 × 1020.
(b) The valence band has a width of 12 eV, so the average spacing between the states is
12 eV / 2.0 ×1020 = 6.0 ×10−20 eV .
25.
(a) From Equation 11.25,
Eg = 3.53kTc = 3.53(8.617 × 10−5 eV/K)(0.65 K) = 0.20 meV
(b)
26.
λ=
hc 1240 eV ⋅ nm
=
= 6.3 × 106 nm = 6.3 mm in the microwave region
−3
E 0.20 × 10 eV
The minimum energy of the photons that can destroy the superconductivity are
E=
hc
λ
=
1240 eV ⋅ nm
= 1.36 ×10−3 eV = 1.36 meV
6
0.91× 10 nm
This must be the same as the gap energy, so Eg = 1.36 meV for Ta. According to the
BCS theory, the critical temperature is
Tc =
Eg
3.53k
=
1.36 ×10−3 eV
= 4.47 K
3.53(8.617 ×10−5 eV/K)
27. The frequency f = ω / 2π is
236
f =
ω 2eΔV 2(1.60 × 10−19 C)(1.25 ×10−6 V)
=
=
= 603 MHz
2π
2π
6.63 × 10−34 J ⋅ s
Such frequencies in the radio region of the electromagnetic spectrum can be measured
with very high precision.
28. Assuming the Fermi energy to be at the middle of the gap, the relative number of
electrons excited from the valence band to the conduction band will be proportional to
− E / 2 kT
e − ( E − EF ) / kT = e g
, so the ratio of the conductivities at two different temperatures
should be roughly
− E / 2 kT
-5
e g 1 e − (1.1 eV)/2(8.617×10 eV/K)(393 K)
=
= 255
-5
− E / 2 kT
e g 2 e − (1.1 eV)/2(8.617×10 eV/K)(293 K)
There are other temperature-dependent factors on which the conductivity depends, but
their temperature variation is much weaker than the exponential factor. Note that a
relatively small change in the temperature produces a huge change in the conductivity.
29.
(a) With the Fermi energy at the middle of the gap, the number of excited electrons is
− E / 2 kT
and so the fraction is approximately
proportional to Ne − ( E − EF ) / kT = Ne g
− E / 2 kT
−5
e g
= e − (1.1 eV) / 2(8.617×10 eV/K)(100 K) = 1.9 × 10−28 at 100 K
−5
− E / 2 kT
= e − (1.1 eV) / 2(8.617×10 eV/K)(293 K) = 3.5 × 10−10 at 293 K
e g
(b) In a metal, the conductivity decreases linearly with the temperature, so it would drop
by roughly a factor of 3 over this temperature range.
30.
− E / 2 kT
,
The occupation probability in the conduction band is roughly e − ( E − EF ) / kT = e g
assuming the Fermi energy is at the middle of the gap. If the occupation probabilities are
equal, then the values of the exponents must be equal: Eg (Si) / 2kTSi = Eg (Ge) / 2kTGe , or
TGe = TSi
Eg (Ge)
Eg (Si)
= (293 K)
0.66 eV
= 173 K
1.12 eV
This is only a rough estimate, because we have ignored several factors that give an
additional temperature dependence as well as a dependence on the different effective
masses of electrons in Ge and Si. The correct value is closer to 200 K, but even this
rough calculation gives a fairly good estimate of the temperature.
31.
(a) The electric field in a dielectric is reduced by a factor of 1/κ, where κ is the dielectric
constant. In electric field equations, that change can be accomplished by replacing ε0 by
237
κε0 everywhere it appears. In the Bohr theory (Equation 6.30), the energy levels include
the factor 1/ ε 02 , so the energy of the single phosphorous electron in Si is
E=
−13.6 eV
κ
2
=
−13.6 eV
= −0.094 eV
122
(b) Again from the Bohr theory, the electron energy is directly proportional to the
electron mass, so the effective mass changes the energy by the factor meff / m = 0.43 . The
energy would then be (−0.094 eV)(0.43) = −0.040 eV . This is very close to the observed
energy necessary to excite an electron for phosphorous impurities in Si (0.045 eV).
32. (a) For kT = (8.617 × 10−5 eV/K)(293 K) = 0.0252 eV and E − EF = Eg / 2 = 0.55 eV , we
have
f FD ( E ) =
1
e
( E − EF ) / kT
+1
=
1
e
Eg / 2 kT
+1
=
1
e
0.55 eV/0.0252 eV
+1
= 3.32 × 10−10
(b) The occupied states in the conduction band exactly correspond to the empty states in
the valence band, so the occupation probability in the valence band is 1 − 3.32 × 10−10 .
33. The fraction of electrons in the conduction band is roughly e − ( E − EF ) / kT = e
the Fermi energy is at the center of the gap:
e
− Eg / 2 kT
= e −0.66 eV/2(8.617×10
−5
eV/K)(293 K)
− Eg / 2 kT
, assuming
= 2.1×10−6
To increase the population of the conduction band by a factor of 3, it is necessary to
provide twice this number of donor atoms, so the relative population of donor atoms must
be 4.2 × 10−6.
34.
(a) From Equation 11.31 with kT = 0.0252 eV, we have
i (2 V) e 2.00 eV/0.0252 eV − 1
= 1.00 eV/0.0252 eV
= 1.7 ×1017
−1
i (1 V) e
(b) At 400 K, kT = (8.617 ×10−5 eV/K)(400 K) = 0.0345 eV and
i (2 V) e 2.00 eV/0.0345 eV − 1
= 1.00 eV/0.0345 eV
= 3.9 × 1012
−1
i (1 V) e
This sensitive dependence of current on temperature is in part what distinguishes
semiconductors from ordinary metals.
238
35.
From Equation 11.30, the coefficient i0 is (with kT = 0.025 eV at room temperature)
i0 =
i
e
eΔVext / kT
−1
=
1.5 mA
e
0.25 eV/0.025 eV
−1
= 6.8 ×10−5 mA
Under reverse bias, the exponential factor in the denominator will be e−10 = 4.5 ×10−5 ,
which is negligible compared with the 1 in the denominator. Thus under reverse biasing,
i = −i0 = −6.8 × 10−5 mA .
36.
GaP :
λ=
hc 1240 eV ⋅ nm
=
= 549 nm (green)
ΔE
2.26 eV
ZnSe:
λ=
hc 1240 eV ⋅ nm
=
= 432 nm (blue)
ΔE
2.87 eV
37. (a) For green light, the photon energy is E = hc / λ = 1240 eV ⋅ nm / 550 nm = 2.25 eV .
With a mixture of InxGa1−xN, the effective energy gap would be
x(0.7 eV) + (1 − x )(3.4 eV) = 2.25 eV
or
x = 0.43
so we would need 43% InN and 57% GaN.
(b) For violet light, the photon energy is E = hc / λ = 1240 eV ⋅ nm / 400 nm = 3.10 eV and
x(0.7 eV) + (1 − x)(3.4 eV) = 3.10 eV
or
x = 0.11
The mixture should be 11% InN and 89% GaN.
38. The number of electrons in the narrow strip is dN = N ( E ) dE , where the width of the strip
is dE = μB Bapp . We’ll assume that we are at a low enough temperature that we can
approximate the Fermi-Dirac distribution by its T = 0 limit, and we’ll also assume that
the strip is so narrow that we can replace N(E) by its value at E = EF. Then using
Equations 10.47 and 10.49 with E = EF, we obtain for the fraction dN/N:
3(9.27 × 10−24 J/T)(1 T)
dN EF1/ 2 dE 3μB Bapp
= 2 3/ 2 =
=
= 2.8 × 10−5 = 0.0028%
−19
×
2
2(3.15
eV)(1.6
10
J/eV)
N
E
E
F
3 F
Even with a relatively large field of 1 T, only a small fraction of the electron spins will
flip.
39. (a) The states have energies of E = − g J μB mJ Bapp = ∓ μB Bapp with gJ = 2 and mJ = ±1/ 2 .
E = ∓ μB Bapp = ∓ (9.27 × 10−24 J/T)(0.25 T) = ∓2.32 × 10−24 J = ∓1.45 × 10−5 eV
239
At room temperature, kT = (8.617 × 10−5 eV/K)(293 K) = 0.0252 eV . The Boltzmann
population factors are then
−5
N+
e − E+ / kT
e −1.45×10 eV/0.0252 eV
= − E+ / kT
=
= 0.4997
5
−
−5
+ e − E− / kT e −1.45×10 eV/0.0252 eV + e +1.45×10 eV/0.0252 eV
N+ + N− e
N−
N+
= 1−
= 1 − 0.4997 = 0.5003
N+ + N−
N+ + N−
The difference between the relative spin-down and spin-up populations is 0.0006.
(b) At 4.2 K, kT = (8.617 ×10−5 eV/K)(4.2 K) = 3.62 × 10−4 eV and so
−5
−4
N+
e − E+ / kT
e −1.45×10 eV/3.62×10 eV
= − E+ / kT
=
= 0.480
−5
−4
−5
−4
+ e − E− / kT e −1.45×10 eV/3.62×10 eV + e +1.45×10 eV/3.62×10 eV
N+ + N− e
N−
N+
= 1−
= 1 − 0.480 = 0.520
N+ + N−
N+ + N−
At the lower temperature, the population difference is about 4%.
40.
(a) For Li, with ρ = 0.534 g/cm3 and M = 6.94 g/mole,
N ρ N A (0.534 × 103 kg/m3 )(6.02 ×1023 atoms/mole)
=
=
= 4.63 ×1028 m −3
−3
6.94 × 10 kg/mole
V
M
χ=
3μ0 μB2 N 3(4π ×10−7 T ⋅ m/A)(9.27 × 10−24 J/T) 2 (4.63 ×1028 m −3 )
=
= 10.0 × 10−6
2EF V
2(4.70 eV)(1.60 × 10−19 J/eV)
The experimental value for comparison is
χ expt =
4πρ cgs
4π (0.534)
(14.2 ×10−6 ) = 13.7 ×10−6
χ molar =
M
6.94
(b) For Ba, with ρ = 3.50 g/cm3 and M = 137.3 g/mole,
N ρ N A (3.504 × 103 kg/m3 )(6.02 × 1023 atoms/mole)
=
=
= 1.53 ×1028 m −3
−3
137.34 × 10 kg/mole
V
M
χ=
3μ0 μB2 N 3(4π ×10−7 T ⋅ m/A)(9.27 × 10−24 J/T) 2 (2 × 1.53 × 1028 m −3 )
=
= 8.5 × 10−6
−19
2EF V
2(3.65 eV)(1.60 × 10 J/eV)
240
The experimental value for comparison is
χ expt =
4πρ cgs
4π (3.50)
(20.6 × 10−6 ) = 6.6 × 10−6
χ molar =
M
137.3
41. (a) For gold, the number of free electrons per unit volume is
N ρ N A (19.3 ×103 kg/m3 )(6.02 × 1023 atoms/mole)
=
=
= 5.90 ×1028 m −3
V
M
0.197 kg/mole
The Pauli paramagnetic susceptibility is
χ=
3μ0 μB2 N 3(4π ×10−7 T ⋅ m/A)(9.27 × 10−24 J/T) 2 (5.90 × 108 m −3 )
=
= 10.8 × 10−6
−19
2 EF V
2(5.53 eV)(1.60 ×10 J/eV)
(b) The experimental volume susceptibility in SI units is
SI
= 4π
χ volume
ρ
M
cgs
= 4π
χ molar
19.3 g/cm3
(−28.0 × 10−6 ) = −34.5 × 10−6
197 g/mole
With χ total = χ para + χ dia , we have χ dia = −45.3 ×10−6 .
42. (a) For MnCl2, ρ = 3.0 g/cm3 and M = 126 g/mole. The SI volume susceptibility is then
SI
= 4π
χ volume
ρ
M
cgs
= 4π
χ molar
3.0 g/cm3
(14350 ×10−6 ) = 4.29 ×10−3
126 g/mole
N ρ N A (3.0 × 103 kg/m3 )(6.02 × 1023 atoms/mole)
=
=
= 1.43 ×1028 m −3
V
M
0.126 kg/mole
g J2 J ( J + 1) =
3kT χ
3(1.38 ×10−23 J/K)(293 K)(4.29 × 10−3 )
=
= 33.7
μ0 ( N / V ) μB2 (4π ×10−7 T ⋅ m/A)(1.43 ×1028 m −3 )(9.27 × 10−24 J/T)2
(b) The neutral Mn atom has the electronic configuration 3d 5s2. If we remove the two
outer 4s electrons, the Mn++ ion will have the configuration 3d 5 The 3d subshell can
accommodate a total of 10 electrons with 5 different ml values. Without duplicating any
ml values, each of the five 3d electrons in Mn++ can have ms = +1/2, so we have S = 5/2.
The 5 electrons with ms = +1/2 must use up all of the allowed ml values for l = 2 (+2, +1,
0, −1, −2), so the total L is zero.
(c) With J = L + S = 0 + 5 / 2 = 5 / 2 , we have
g J = 33.7 / J ( J + 1) = 33.7 /(2.5)(3.5) = 1.96
241
This is in excellent agreement with the value 2.0 expected when the magnetic moment
depends only on the spin and not on the orbital angular momentum.
43.
Let a represent the spacing between the ions. Any particular ion in the lattice will
experience an attractive potential energy due to the two closest neighbors of the opposite
charge:
U1 = 2
(+ e)(−e) 1
e2 1
= −2
4πε 0 a
4πε 0 a
At a distance of 2a from this ion, there will be two ions of the same charge, so the next
term in the series is
U 2 = +2
e2
1
4πε 0 2a
The series continues as follows:
e2
1
U 3 = −2
4πε 0 3a
and
U 4 = +2
e2
1
4πε 0 4a
and so forth. The total potential energy is U = U1 + U 2 + U 3 + U 4 +
U = −2
e2 ⎛ 1 1
1
1
+ −
+
⎜ −
4πε 0 ⎝ a 2a 3a 4a
, or
e 2 ∞ (−1) n +1
e2
e2
⎞
α
=
−
2
=
−
2
(ln
2)
=
−
∑
⎟
4πε 0 a n =1 n
4πε 0 a
4πε 0 a
⎠
where α = 2 ln 2 .
Cohesive energy (kJ/mole)
44.
3000
2000
1000
0
0
1000
2000
3000
4000
Melting temperature (K)
There does seem to be a rough correlation between cohesive energy and melting point.
242
Cohesive energy (kJ/mole)
45.
2000
1500
1000
500
0
0
100
200
300
400
500
Melting temperature (K)
There seems to be a very good correlation between cohesive energy and melting point for
the metallic solids – the larger the cohesive energy, the higher the melting point. The line
shows that the relationship is very nearly linear.
46.
(a) With U ( R ) = −α
e 2 1 α e 2 R0n −1 1
+
, we obtain
4πε 0 R 4πε 0 n R n
F ( R) = −
(b) F ( R0 + x) = −
dU
α e2 ⎛ 1 R0n −1 ⎞
=−
−
⎜
⎟
dR
4πε 0 ⎝ R 2 R n +1 ⎠
R0n −1 ⎞
dU
α e2 ⎛
1
=−
−
⎜
⎟
dR
4πε 0 ⎝ ( R0 + x) 2 ( R0 + x) n +1 ⎠
⎛
⎞
⎡
α e2
1
1
α e2
1
x⎤
1−
(n − 1) ⎥
=−
≅−
n −1 ⎟
2 ⎜
2
2 ⎢
R0 ⎦
4πε 0 ( R0 + x) ⎝ (1 + x / R0 ) ⎠
4πε 0 R0 (1 + x / R0 ) ⎣
=−
(c) k =
f =
(d)
α e2 (n − 1)
x = − kx
4πε 0 R03
with
k=
α e2 (n − 1)
4πε 0 R03
α e 2 (n − 1) (1.75)(1.44 eV ⋅ nm)(8)
=
= 909 eV/nm 2
3
3
4πε 0 R0
(0.281 nm)
1
2π
k
1
=
m 2π
kc 2
1
=
2
mc
2π
(909 eV/nm 2 )(9.00 × 1016 m 2 /s 2 )
= 9.83 × 1012 Hz
(23 u)(931.5 × 106 eV/u)(10−9 m/nm) 2
c 3.00 ×108 m/s
= 30.5 × 10−6 m = 30.6 μ m
λ= =
12
f 9.83 × 10 Hz
243
which is in the infrared region of the electromagnetic spectrum.
47. The potential energy of electric dipole B in the electric field of dipole A is U = −p B ⋅ E A .
With pB ∝ EA and EA ∝ 1/ r 3 , it follows that pB ∝ 1/ r 3 and thus U ∝ 1/ r 6 . With
U = C / r 6 , we obtain
F =−
dU
d
= − Cr −6 = 6Cr −7
dr
dr
48.
T (K)
1
2
3
4
6
8
C (J/mole⋅K)
0.00138
0.00292
0.00475
0.00705
0.0135
0.0238
T (K)
10
15
20
25
30
40
20
40
C (J/mole⋅K)
0.0378
0.108
0.240
0.473
0.851
2.09
T (K)
50
60
70
80
90
100
C (J/mole⋅K)
3.83
5.78
7.75
9.64
11.4
13.0
15
C (J/mole.K)
12
9
6
3
0
0
60
80
100
T (K)
The best fit with the Einstein model is obtained for an Einstein temperature of about
280 K, but the lowest temperature data are not fit very well.
(b)
0.004
C/T
0.003
0.002
0.001
0
0
20
40
244
T2
60
80
100
The slope of the line is b = 2.55 × 10−5 J/mole⋅K4. From Equation 11.12 we have
1/ 3
⎛ 12π 4 R ⎞
TD = ⎜
⎟
⎝ 5b ⎠
⎡ 12π 4 (8.31 J/mole ⋅ K) ⎤
=⎢
4 ⎥
−5
⎣ 5(2.44 ×10 J/mole ⋅ K ) ⎦
1/ 3
= 430 K
The intercept of the line is 1.37 × 10−3 J/mole⋅K2. With EF = 11.7 eV, Equation 11.9
gives the expected intercept as
a=
3π 2 kR 3π 2 (8.617 ×10−5 eV/K)(8.31 J/mole ⋅ K)
=
= 9.06 ×10−4 J/mole ⋅ K 2
2 EF
2(11.7 eV)
The expected value can be forced into agreement with the value deduced from the graph
if we modify the Fermi energy by reducing it by a factor of 1.51. This reduction in the
Fermi energy in turn comes about by using an effective mass for the electron that is 1.51
times its actual mass.
(a)
T (K)
1
2
3
4
6
8
C (J/mole⋅K)
0.00118
0.00493
0.0138
0.0315
0.0985
0.236
T (K)
10
15
20
25
30
40
20
40
C (J/mole⋅K)
0.433
1.46
3.13
5.18
7.31
11.3
T (K)
50
60
70
80
90
100
C (J/mole⋅K)
14.3
16.6
18.3
19.5
20.5
21.3
25
20
C (J/mole.K)
49.
15
10
5
0
0
60
80
100
T (K)
The best fit to the higher temperature data is for an Einstein temperature of about 135 K,
although the Einstein model doesn’t fit the lower temperature data very well.
(b)
245
0.05
C/T
0.04
0.03
0.02
0.01
0
0
20
40
T2
60
80
100
The slope of the line is b = 4.31 × 10−4 J/mole⋅K4. From Equation 11.12 we have
1/ 3
⎛ 12π 4 R ⎞
TD = ⎜
⎟
⎝ 5b ⎠
⎡ 12π 4 (8.31 J/mole ⋅ K) ⎤
=⎢
4 ⎥
−4
⎣ 5(4.31×10 J/mole ⋅ K ) ⎦
1/ 3
= 165 K
The intercept is a = 8.95 × 10−4 J/mole⋅K2. From Equation 11.9 we have (with EF = 5.53
eV)
a=
π 2 kR
2 EF
=
π 2 (8.617 ×10−5 eV/K)(8.31 J/mole ⋅ K)
2(5.53 eV)
= 6.39 × 10−4 J/mole ⋅ K 2
If we reduce the Fermi energy by using an effective mass for the electron of 1.40 times its
actual mass, the expected value of the intercept will agree with the value obtained from
the graph.
50.
(a) If we take p = 2mE , then dp =
we have
Δx ∼
Δp
=
1
2
2m / E dE . With E = EF, dE = Eg, and m = 2me,
me / EF Eg
=
EF c
me c 2 Eg
(b) For aluminum,
Δx ∼
EF c
11.7 eV
197 eV ⋅ nm
=
= 2.8 × 103 nm
2
6
−3
me c Eg
0.511× 10 eV 0.34 × 10 eV
This amounts to about 104 times the atomic separation in aluminum, so the Cooper pair is
indeed very large compared with the distance between atoms.
246
51.
662 ×103 eV
= 1.00 × 106 electrons
0.66 eV/electron
(a)
N=
(b)
δ N = N = 1.00 × 103
(c)
δE
E
=
δN
N
δN
N
= 1.00 × 10−3
δE =
= 1.00 × 10−3
δE
E
E = (1.00 ×10−3 )(662 keV) = 0.662 keV
52. Grouping the constants in Equation 11.39 together, we can write the susceptibility as
+J
χ = −C
∑
mJ =− J
+J
−J
mJ e − mJ c / T
∑
=C
e − mJ c / T
mJ =− J
∑
mJ =+ J
+J
∑
mJ e m J c / T
e − mJ c / T
mJ =− J
We then have:
0.5e0.5c / T + (−0.5)e −0.5c / T
e −0.5c / T + e0.5c / T
J = 1/ 2 :
χ =C
J = 1:
(1.0)ec / T + 0 + (−1.0)e − c / T
χ =C
e− c / T + 1 + ec / T
J = 3/ 2:
(1.5)e1.5c / T + (0.5)e0.5c / T + (−0.5)e −0.5c / T + (−1.5)e −1.5c / T
χ =C
e −1.5c / T + e −0.5c / T + e0.5c / T + e1.5c / T
1
χ / χ max
J = 3/2
J=1
J = 1/2
0
1/T (K−1)
53. The interaction energy of two adjacent dipoles in iron separated by the atomic spacing
(0.248 nm) is
247
E = μB =
μ0 μ 2 (4π × 10−7 T ⋅ m/A)(2.2 × 9.27 × 10−24 J/T) 2
=
= 3.4 × 10−5 eV
3
3
−9
−19
2π r
2π (0.248 ×10 m) (1.6 × 10 J/eV)
This would correspond to a thermal energy of kT for T = 0.4 K. That is, above about 0.4
K the thermal energy is sufficient to destroy the tendency of the dipoles to align due to
the interaction with neighboring dipoles. This indicates that the dipole-dipole interaction
is far too weak to be responsible for ferromagnetism as observed at ordinary
temperatures.
54. (a) In N2, the six 2p electrons fill all of the bonding states, with 2 electrons in each state
(px, py, pz). These electrons are paired with spin up and spin down. When all electrons
spins are paired, we expect the substance to be diamagnetic. O2 has 2 additional
electrons, which go into the first antibonding state. This state includes the degenerate py
and pz orbitals, so it is possible to have the 2 electron spins in the same direction without
violating the Pauli principle. So for oxygen to be paramagnetic, we must indeed have the
two spins in the antibonding states in the same direction. (b) NO would have a single
electron in the antibonding state, and thus all electrons cannot be paired. We therefore
expect NO to be paramagnetic. It is indeed observed to be paramagnetic, with a magnetic
susceptibility of roughly half that of O2.
248
Chapter 12
This chapter presents a basic introduction to the structure of nuclei, including masses,
binding energies, and radioactive decays. New to this edition are sections that improve
the integration of nuclear properties with previous material in the text, thereby presenting
a more coherent view of nuclear structure as a manifestation of phenomena that have
already been discussed in quantum mechanics or applied to atoms or molecules.
Examples of this material include proton and neutron separation energies (which are the
counterpart of ionization energies in atoms), quantum states in nuclei (similar to states in
potential energy wells discussed in Chapter 5 and filled in analogy to electron states in
atoms as discussed in Chapter 8), and nuclear rotational and vibrational excited states
(analogous to the molecular states considered in Chapter 9).
Supplemental Materials
A complete tabulation of nuclear masses, decay properties, isotopic abundances, excited
states is:
R. B. Firestone and V. S. Shirley, editors, Table of Isotopes, 8th Edition (Wiley, 1999).
A more compact listing of radioactive isotopes and their decay properties can be found in
the Table of Radioactive Isotopes, which is available both in print format (E. Browne
and R. B. Firestone, editors; Wiley, 1986) and electronic format (http://ie.lbl.gov/toi/).
Suggestions for Additional Reading
The following are some intermediate-level, comprehensive nuclear physics texts.
B. L. Cohen, Concepts of Nuclear Physics (McGraw-Hill, 1971).
R. D. Evans, The Atomic Nucleus (McGraw-Hill, 1955).
I. Kaplan, Nuclear Physics (Addison-Wesley, 1962).
K. S. Krane, Introductory Nuclear Physics (Wiley, 1987).
Materials for Active Engagement in the Classroom
A. Reading Quizzes
1. The nuclear force
(1) has infinite range, like the electromagnetic or gravitational force.
(2) becomes infinite in strength as the distance between two particles approaches
zero.
(3) is exerted by each proton or neutron on only its nearest neighbors.
249
(4) is exerted by each proton or neutron on all other protons or neutrons in the
nucleus.
2. The binding energy of a nucleus is:
(1) the energy needed to remove one proton or neutron.
(2) the energy needed to take apart a nucleus into its constituent protons and
neutrons.
(3) the energy with which the nucleus attracts the atomic electrons.
(4) the energy equivalent of the mass of the nucleus.
3. The number of neutrons in a nucleus is:
(1) always equal to the number of protons.
(2) usually greater than the number of protons.
(3) usually smaller than the number of protons.
(4) always equal to the number of electrons in the atom.
4. In which type of decay process is the total number of protons before the decay not
equal to the total number of protons after the decay?
(1) Alpha decay
(2) Beta decay
(3) Gamma decay
(4) All of the decay processes
(5) None of the decay processes
5. Which of the following is allowed to change in a radioactive decay process?
(1) Total energy
(2) Total number of nucleons (protons plus neutrons)
(3) Total electric charge
(4) Total number of electrons
Answers
1. 3
2. 2
3. 2
4. 2
5. 4
B. Conceptual or Discussion Questions
1. Suppose we combine two nuclei of Ca to make a single nucleus of Zr.
(a) Compared with one of the original Ca nuclei, the newly formed nucleus of Zr will
have:
(1) twice the radius (2) twice the surface area
(3) twice the volume
(b) If B represents the total binding energy of a Ca nucleus, then the total binding
energy of a Zr nucleus is approximately
(1) 0.5B
(2) B
(3) 2B
(4) 4B
(5) 8B
2. For two protons separated by a distance of about 1 fm (a typical separation in a
nucleus), the attractive nuclear (strong) force is stronger than the Coulomb repulsion
force. Why then do nuclei need neutrons? Why don’t we find nuclei with Z protons
and zero neutrons?
3. Light nuclei generally have N ≈ Z, but more massive nuclei have N ≈ 1.5Z. That is,
as nuclei become more massive the number of neutrons increases more rapidly than
the number of protons. Why?
250
4. Choose from among the following decay processes:
(1) Alpha decay
(2) All beta decays (3) Negative beta decay
(4) Positive beta decay
(5) Negative or positive beta decay
(6) Electron capture decay (7) Gamma decay
(8) Alpha and gamma decays
(9) Alpha, electron capture, and gamma decays
(10) Alpha, beta, and gamma decays
(a) In which type of decay might we expect to see bremsstrahlung?
(b) Which type of decay is accompanied by monoenergetic X rays?
(c) Which type of decay is accompanied by two 0.511-MeV photons?
(d) In which type of decay is a monoenergetic particle emitted?
(e) In which type of decay is new matter created?
(f) Assuming the same Q value, in which type of decay would the residual nucleus
have the largest kinetic energy?
Answers
1. (a) 3 (b) 3
2. Neutrons are necessary to oppose the Coulomb force with its infinite range.
3. The Coulomb force (with infinite range) affects all protons in the nucleus.
4. (a) 5 (b) 6 (c) 4 (d) 9 (e) 2 (f) 1
Sample Exam Questions
A. Multiple Choice
1. A sample contains a large number of radioactive nuclei. At any instant of time, the
rate of decay is:
(a) directly proportional to the number of nuclei that have already decayed.
(b) directly proportional to the number of nuclei that have not yet decayed.
(c) constant in time.
(d) directly proportional to the half-life of the decay.
2. The nuclear force:
(a) has infinite range.
(b) is generally stronger than the electromagnetic force.
(c) becomes infinite as the distance between particles approaches zero.
(d) acts on electrons that may be inside the nucleus.
3. Nucleus A has a half-life T and nucleus B has a half-life 2T. Initially the number of
nuclei of type A equals the number of nuclei of type B. After a certain time, 10% of
the nuclei of type B remain. At this same time, what fraction of the nuclei of type A
remains?
(a) 5%
(b) 1%
(c) 0.01%
(d) 20%
(e) 50%
4. The energy necessary to remove a proton or a neutron from a nucleus is typically
about
(a) 1 MeV
(b) 10 MeV
(c) 100 MeV
(d) 1000 MeV
251
5. Two nuclei of 40Ca (atomic number 20) undergo fusion to form a nucleus of 80Zr
(atomic number 40). The total binding energy of 40Ca is B. What would be the best
estimate for the total binding energy of 80Zr?
(a) 4B
(b) 2B
(c) B
(d) B/2
(e) B/4
Answers
1. b
2. b
3. b
4. b
5. b
B. Conceptual
1. A nucleus of 4He absorbs a photon of energy E which causes it to split apart into two
nuclei of 2H. The two 2H nuclei fly apart with kinetic energies K1 and K2. Is the total
final kinetic energy K (which is equal to K1 + K2) greater than, less than, or equal to
the photon energy E? EXPLAIN YOUR ANSWER.
2. Suppose we can break apart a nucleus of
48
24
Cr24 in two different ways: 2 nuclei of
24
12
Mg12 or 3 nuclei of
24
12
Mg12 greater than, less than, or equal to the amount of energy required to break it
into three
16
8
16
8
O8 . Is the amount of energy required to break it into two
O8 ? EXPLAIN YOUR ANSWER.
3. You wish to obtain a supply of 20 free neutrons and 20 free protons. You have
available either one nucleus of 40Ca (Z = 20, N = 20) or two nuclei of 20Ne (Z = 10, N
= 10). Will the energy necessary to obtain the 20 neutrons and 20 protons from one
40
Ca nucleus be less than, greater than, or equal to the energy necessary to obtain the
same number of neutrons and protons from the two 20Ne nuclei? EXPLAIN YOUR
ANSWER.
4.
224
Ra can decay either by alpha emission or by 12C emission. The probability for
alpha emission is about 109 greater than the probability for 12C emission. How would
you explain this great difference?
Answers
1. less than
2. less than
3. greater than
12
4. The Coulomb barrier for C is 3 times higher than for 4He.
C. Problems
1. (a) Natural uranium today consists of about 0.7% of the isotope 235U (half life = 7.1 ×
108 y) and 99.3 % of 238U (half life = 4.5 × 109 y). At some time in the past, natural
uranium would have contained 3.0% of 235U, enough to make natural watermoderated fission reactors. How long before the present time did this occur?
(b) Compute the binding energy per nucleon of 238U (atomic number = 92, atomic
mass = 238.050784 u).
252
2. Consider the decay
226
88
Ra →
212
82
(a) The kinetic energy of the
Pb + 146 C , which is similar to alpha decay.
14
6
C emitted in this decay process is 26.704 MeV.
Calculate the kinetic energy of the “recoiling”
rest before the decay.
(b) Given the atomic masses of
atomic mass of
212
82
226
88
212
82
Pb . Assume the original
226
88
Ra is at
Ra (226.025410 u) and 146 C (14.003242 u), find the
Pb .
(c) Suppose the half-life for this decay is T. In terms of T, how long does it take for
95% of the nuclei in a sample of 226
88 Ra to decay?
3. In a process similar to alpha decay, a nucleus can emit a 12C particle instead of an
212
12
alpha particle (4He). Consider the decay 224
88 Ra → 82 Pb + 6 C . The masses are:
m(224Ra) = 224.020212 u; m(212Pb) = 211.991898 u; m(12C) = 12.000000 u.
(a) How much energy is released in this decay?
(b) Suppose the original 224Ra is at rest. Find the ratio of the kinetic energies
K(12C)/K(212Pb).
4. In the alpha decay of 226Ra (originally at rest) to 222Rn (m = 222.017578 u), an alpha
particle (m = 4.002603 u) is emitted with a kinetic energy of 4.785 MeV. The masses
given here are atomic masses.
(a) Find the recoil kinetic energy of the 222Rn and the total energy released in the
decay.
(b) From this information, find the atomic mass of 226Ra.
(c) The half-life of 226Ra is 1600 y. How long must you wait for 90% of the original
Ra nuclei in a sample to decay?
5. (a) Find the total binding energy and the binding energy per nucleon for 61
28 Ni (atomic
61
mass = 60.931056 u). (b) Would you expect Ni to decay by beta decay?
61
Neighboring nuclei are 61
29 Cu (mass = 60.933458 u) and 27 Co (mass = 60.932476 u).
Explain your answer.
6. (a) Calculate the binding energy per nucleon of 84 Be (atomic mass = 8.005305 u).
(b) 84 Be decays into two alpha particles, 42 He 42He2 (atomic mass = 4.002603 u).
Calculate the kinetic energy of the two alphas if the original Be is at rest.
Answers
1. (a) 1.8 × 109 y (b) 7.57 MeV
2. (a) 1.763 MeV (b) 211.991608 u (c) 4.32T
3. (a) 26.4 MeV (b) 17.7
4. (a) 0.086 MeV, 4.871 MeV (b) 226.025410 u (c) 5315 y
5. (a) 534.7 MeV, 8.77 MeV (b) No, because mf > mi
6. (a) 7.06 MeV (b) 0.0461
253
Problem Solutions
1. (a) Fluorine has Z = 9, and given A = 19, we have N = A − Z = 19 − 9 = 10. The symbol
is 199 F10 .
(b) Gold has Z = 79, so A = Z + N = 79 + 120 = 199. The symbol is
199
79
Au120 .
(c) With A = 107 and N = 60, Z = A − N = 107 − 60 = 47. The element with Z = 47 is
silver, and the symbol is 107
47 Ag 60 .
2. The atomic number of tin is Z = 50, and so the symbols are
114
50
116
117
118
119
120
122
124
Sn 64 , 115
50Sn 65 , 50Sn 66 , 50Sn 67 , 50Sn 68 , 50Sn 69 , 50Sn 70 , 50Sn 72 , 50Sn 74
3. (a) The radius of 16O is R = (1.2 fm)A1/3 = (1.2 fm)(16)1/3 = 3.0 fm. The Coulomb
repulsion energy of two charges of 8e whose centers are separated by 6.0 fm is
U=
1 q2
e 2 Z 2 (1.440 MeV ⋅ fm)(82 )
=
=
= 15 MeV
4πε 0 r 4πε 0 r
6.0 fm
(b) For 238U, R = (1.2 fm)A1/3 = (1.2 fm)(238)1/3 = 7.4 fm, and with Z = 92 the repulsion
energy is
e 2 Z 2 (1.440 MeV ⋅ fm)(922 )
U=
=
= 824 MeV
4πε 0 r
14.8 fm
4. (a) R = (1.2 fm)A1/3 = (1.2 fm)(197)1/3 = 7.0 fm
(b) R = (1.2 fm)A1/3 = (1.2 fm)(4)1/3 = 1.9 fm
(c) R = (1.2 fm)A1/3 = (1.2 fm)(20)1/3 = 3.3 fm
5. (a) B = [ Nmn + Zm(1 H) − m( A X )]c 2
= [126(1.008665 u) + 82(1.007825 u) − 207.976652 u](931.50 MeV/u) = 1636.4 MeV
B / A = (1636.4 MeV) / 208 = 7.868 MeV per nucleon
(b) B = [78(1.008665 u) + 55(1.007825 u) − 132.905452 u](931.50 MeV/u) = 1118.5 MeV
B / A = (1118.5 MeV) /133 = 8.410 MeV per nucleon
(c) B = [50(1.008665 u) + 40(1.007825 u) − 89.904704 u](931.50 MeV/u) = 783.9 MeV
B / A = (783.9 MeV) / 90 = 8.710 MeV per nucleon
(d) B = [32(1.008665 u) + 27(1.007825 u) − 58.933195 u](931.50 MeV/u) = 517.3 MeV
B / A = (517.3 MeV) / 59 = 8.768 MeV per nucleon
254
6. (a) B = [ Nmn + Zm(1 H) − m( A X )]c 2
= [2(1.008665 u) + 2(1.007825 u) − 4.002603 u](931.50 MeV/u) = 28.30 MeV
B / A = (28.30 MeV) / 4 = 7.074 MeV per nucleon
(b) B = [10(1.008665 u) + 10(1.007825 u) − 19.992440 u](931.50 MeV/u) = 160.6 MeV
B / A = (160.6 MeV) / 20 = 8.032 MeV per nucleon
(c) B = [20(1.008665 u) + 20(1.007825 u) − 39.962591 u](931.50 MeV/u) = 342.1 MeV
B / A = (342.1 MeV) / 40 = 8.551 MeV per nucleon
(d) B = [30(1.008665 u) + 25(1.007825 u) − 54.938045 u](931.50 MeV/u) = 482.1 MeV
B / A = (482.1 MeV) / 55 = 8.765 MeV per nucleon
7.
He: B = [1(1.008665 u) + 2(1.007825 u) − 3.016029 u](931.50 MeV/u) = 7.718 MeV
H: B = [2(1.008665 u) + 1(1.007825 u) − 3.016049 u](931.50 MeV/u) = 8.482 MeV
The radius of a nucleus with A = 3 is R = 1.2 A1/ 3 = 1.2(3)1/ 3 = 1.7 fm and the Coulomb
repulsion energy of two protons separated by 1.7 fm is
3
3
e 2 1 1.440 eV ⋅ nm
U=
=
= 0.85 MeV
4πε 0 R
1.7 fm
This is very close to the difference in binding energy of 8.482 MeV − 7.718 MeV = 0.764
MeV, which suggests that the smaller binding energy of 3He arises primarily from the
Coulomb repulsion of its two protons.
8. (a) S n (17 O) = [mn + m(16 O) − m(17 O)]c 2
= [1.008665 u + 15.994915 u − 16.999132 u](931.50 MeV/u) = 4.143 MeV
7
(b) Sn ( Li) = [mn + m( 6 Li) − m( 7 Li)]c 2
= [1.008665 u + 6.015123 u − 7.016005 u](931.50 MeV/u) = 7.250 MeV
57
(c) Sn ( Fe) = [mn + m(56 Fe) − m( 57 Fe)]c 2
= [1.008665 u + 55.934937 u − 56.935394 u](931.50 MeV/u) = 7.647 MeV
9. (a) S p ( 4 He) = [m(1 H) + m( 3 H) − m( 4 He)]c 2
= [1.007825 u + 3.016049 u − 4.002603 u](931.50 MeV/u) = 19.814 MeV
(b) S p ( C) = [m(1 H) + m(11 B) − m(12 C)]c 2
12
= [1.007825 u + 11.009305 u − 12.000000 u](931.50 MeV/u) = 15.958 MeV
(c) S p ( Ca) = [m(1 H) + m( 39 K) − m( 40 Ca)]c 2
40
= [1.007825 u + 38.963707 u − 39.962591 u](931.50 MeV/u) = 8.329 MeV
10. By analogy with Equation 12.8,
mc 2 =
c 197 MeV ⋅ fm
=
= 790 MeV
x
0.25 fm
255
c 197 MeV ⋅ fm
=
= 2.5 × 10−3 fm
2
3
mc
80 × 10 MeV
11.
x=
12.
(a) We first need the proton and neutron separation energies for 16O:
S p (16 O) = [m(1 H) + m(15 N) − m(16 O)]c 2
= [1.007825 u + 15.000109 u − 15.994915 u](931.50 MeV/u) = 12.127 MeV
S n ( O) = [mn + m(15 O) − m(16 O)]c 2
= [1.008665 u + 15.003066 u − 15.994915 u](931.50 MeV/u) = 15.664 MeV
16
The nuclear radius of 16O is R = R0 A1/ 3 = (1.2 fm)161/ 3 = 3.0 fm so the volume of the
nucleus is V = 43 π R 3 = 116 fm3 . The Fermi energy of the protons and neutrons is
(hc) 2 ⎛ 3Z ⎞
EFp =
⎜
⎟
2mc 2 ⎝ 8π V ⎠
2/3
(hc) 2 ⎛ 3 N ⎞
EFn =
⎜
⎟
2mc 2 ⎝ 8π V ⎠
2/3
⎞
(1240 eV ⋅ nm) 2 ⎛
3⋅8
=
⎜
3 ⎟
2(938.3 MeV) ⎝ 8π (116 fm ) ⎠
⎞
(1240 eV ⋅ nm) 2 ⎛
3⋅8
=
⎜
3 ⎟
2(939.6 MeV) ⎝ 8π (116 fm ) ⎠
2/3
= 33.
2/3
= 33.
The well depths are then the sums of the separation energy and Fermi energy:
U 0p = S p + EFp = 12.127 MeV + 33.4 MeV = 45.4 MeV
U 0n = Sn + EFn = 15.664 MeV + 33.4 MeV = 49.1 MeV
(b) For 235U we have
S p ( 235 U) = [m(1 H) + m( 234 Pa) − m( 235 U)]c 2
Sn (
235
= [1.007825 u + 234.043308 u − 235.043930 u](931.50 MeV/u) = 6.710 MeV
U) = [mn + m( 234 U) − m( 235 U)]c 2
= [1.008665 u + 234.040952 u − 235.043930 u](931.50 MeV/u) = 5.297 MeV
R = R0 A1/ 3 = (1.2 fm)2351/ 3 = 7.4 fm
(hc) 2 ⎛ 3Z ⎞
EFp =
⎜
⎟
2mc 2 ⎝ 8π V ⎠
2/3
(hc) 2 ⎛ 3 N ⎞
EFn =
⎜
⎟
2mc 2 ⎝ 8π V ⎠
2/3
⎞
(1240 eV ⋅ nm) 2 ⎛
3 ⋅ 92
=
⎜
3 ⎟
2(938.3 MeV) ⎝ 8π (1700 fm ) ⎠
⎞
(1240 eV ⋅ nm) 2 ⎛
3 ⋅143
=
⎜
3 ⎟
2(939.6 MeV) ⎝ 8π (1700 fm ) ⎠
2/3
= 28.4 MeV
2/3
= 38.1 MeV
U 0p = S p + EFp = 6.710 MeV + 28.4 MeV = 35.1 MeV
U 0n = S n + EFn = 5.297 MeV + 38.1 MeV = 43.4 MeV
256
and
V = 43 π R 3 = 43 π
13. Starting with 160Dy, we first extract 2 neutrons and then extract 2 protons from the
resulting 158Dy. The total energy cost is
E = S 2n (160 Dy) + S 2p (158 Dy) = 15.4 MeV + 12.4 MeV = 27.8 MeV
The gain in energy if those 4 nucleons were formed into an alpha particle would be 28.3
MeV, and thus there is an excess energy of 0.5 MeV available and alpha decay is
allowed. (However, the barrier penetration probability for such a low-energy alpha
particle is extremely small, and as a result 160Dy is a stable nucleus.)
Starting instead with 164Dy, we first extract 2 neutrons and then 2 protons from
the resulting 162Dy. The total energy cost is
E = S 2n (164 Dy) + S 2p (162 Dy) = 13.9 MeV + 14.8 MeV = 28.7 MeV
The energy cost exceeds the gain (28.3 MeV) obtained by forming an alpha particle, so
alpha decay is strictly forbidden for 164Dy.
14.
N / N 0 = e − λt = e −0.693t / t1/ 2 = 0.5t / t1/ 2
(a) t / t1/ 2 = 2 :
N / N 0 = 0.52 = 0.25 = 1/ 4
(b) t / t1/ 2 = 4 :
N / N 0 = 0.54 = 0.0625 = 1/16
(a) t / t1/ 2 = 10 :
15.
N / N 0 = 0.510 = 1/1024 = 0.000977
(a) With a0 = 548 s−1 and a = 213 s−1 at t = 48 min, the radioactive decay equation
a = a0e − λt gives 213 s −1 = (548 s −1 )e −0.693(48 min) / t1/ 2 or
ln
16.
213 s −1
0.693(48 min)
=−
−1
548 s
t1/ 2
so
t1/ 2 = 35 min
0.693 0.693
=
= 0.020 min −1
t1/ 2
35 min
(b)
λ=
(c)
a = a0e − λt = (548 s −1 )e − (0.020 min
With t1/ 2 = 5.0 h = 1.8 × 104 s ,
λ=
-1
)(125 min)
= 46 s −1
0.693
0.693
=
= 3.9 × 10−5 s
4
t1/ 2
1.8 × 10 s
N / N 0 = e −0.693t / t1/ 2 = e −0.693(50.0 y)/(12.3 y) = 0.0598
17.
18. (a)
(b)
a0 = (2.00 mCi)(3.7 × 1010 s −1/Ci) = 7.40 × 107 s −1
a = a0e −0.693t / t1/ 2 = (7.40 × 107 s −1 )e −0.693(28 d) /(8.04 d) = 6.62 × 106 s −1
257
N=
19. (a)
1000 g
6.022 × 1023 atoms/mole = 1.54 × 1025 atoms
39.1 g/mole
Of these, 0.012% or 1.85 × 1021 are radioactive 40K. The activity is
a = λN =
0.693
0.693
N=
1.85 × 1021 = 3.1 × 104 s −1 = 0.85 μCi
9
t1/ 2
(1.3 × 10 y)(3.156 × 107 s/y)
(b) In a sample of N atoms, Nr are radioactive and Nnr are nonradioactive ( N = N r + N nr ).
Presently, N r / N = 0.012% . With N r = N r0e − λt , we obtain for the original number of
radioactive nuclei
N r0 = N r eλt = N r e0.693(4.5×10
9
y) /(1.3×109 y)
= 11.0 N r
At that time (4.5 × 109 years ago), the total number was N 0 = N nr + N r0 and the fraction of
40
K was
N r0
N r0
11N r
11N r
11( N r / N )
11(1.2 × 10−4 )
=
=
=
=
=
= 0.13%
N 0 N nr + N r0 N nr + 11N r N + 10 N r 1 + 10( N r / N ) 1 + 10(1.2 × 10−4 )
20. Conservation of momentum gives p X ' = pα , if the original decaying nucleus is at rest.
Q = K X ' + Kα =
p X2 '
p2
p2
p2
p2
+ α = α + α = α
2m X ' 2mα 2m X ' 2mα 2mα
Kα =
⎛
⎛
mα ⎞
mα ⎞
⎜1 +
⎟ = Kα ⎜ 1 +
⎟
⎝ mX ' ⎠
⎝ mX ' ⎠
⎛ mX ' ⎞
Q
= Q⎜
⎟
1 + mα / m X '
⎝ m X ' + mα ⎠
To a very good approximation,
m X ' ≅ ( A − 4) u
and
m X ' + mα ≅ ( A − 4) u + 4 u = A u
so
⎛ A−4⎞
Kα ≅ Q ⎜
⎟
⎝ A ⎠
21.
(a)
210
Bi → 206Tl + α :
Q = [m( 210 Bi) − m( 206 Tl) − m( 4 He)]c 2
Q = [209.984120 u − 205.976110 u − 4.002603 u](931.50 MeV/u) = +5.04 MeV
258
22.
(b)
203
Hg → 199 Pt + α :
Q = [m( 203 Hg) − m(199 Pt) − m( 4 He)]c 2
Q = [202.972872 u − 198.970593 u − 4.002603 u](931.50 MeV/u) = −0.30 MeV
(c)
211
At → 207 Bi + α :
Q = [m( 211 At) − m( 207 Bi) − m( 4 He)]c 2
Q = [210.987496 u − 206.978471 u − 4.002603 u](931.50 MeV/u) = +5.98 MeV
234
U→
Th + α :
Q = [m( 234 U) − m( 230 Th) − m( 4 He)]c 2
Q = [234.040952 u − 230.033134 u − 4.002603 u](931.50 MeV/u) = 4.859 MeV
230
⎛ A−4⎞
⎛ 230 ⎞
Kα = Q ⎜
⎟ = (4.859 MeV) ⎜
⎟ = 4.776 MeV
⎝ A ⎠
⎝ 234 ⎠
23. For negative beta decay, ZA X →
the mass of the neutrino,
A
Z +1
X ′ + e − + ν , using nuclear masses mN and neglecting
Q = [mN ( ZA X ) − mN ( Z +A1 X ′) − me ]c 2
Converting the nuclear masses to atomic masses and neglecting the atomic binding
energy of the electrons, we then obtain
Q = {[m( ZA X ) − Zme ] − [m( Z +A1 X ′) − ( Z + 1)me ] − me }c 2 = [m( ZA X ) − m( Z +A1 X ′)]c 2
For positron beta decay, ZA X →
A
Z −1
X ′ + e+ + ν ,
Q = [mN ( ZA X ) − mN ( Z −A1 X ′) − me ]c 2
= {[m( ZA X ) − Zme ] − [m( Z −A1 X ′) − ( Z − 1)me ] − me }c 2 = [m( ZA X ) − m( Z −A1 X ′) − 2me ]c
For electron capture, ZA X + e − →
A
Z −1
X ′ +ν ,
Q = [mN ( ZA X ) + me − mN ( Z −A1 X ′)]c 2
= {[m( ZA X ) − Zme ] + me − [m( Z −A1 X ′) − ( Z − 1)me ]}c 2 = [m( ZA X ) − m( Z −A1 X ′)]c
24.
For
11
Be → 11B + e − + ν , assuming the antineutrino mass is negligible,
Q = [m(11 Be) − m(11 B)] = [11.021658 u − 11.009305 u](931.50 MeV/u) = 11.506 MeV
With Q = K B + K e + Kν , the electrons have their maximum kinetic energy when the
antineutrino energy is zero, and assuming the kinetic energy of the 11B is negligibly
small, we conclude that the maximum electron kinetic energy is
K e,max = Q = 11.506 MeV
259
25.
With
75
Se + e − → 75As + ν and assuming the neutrino mass is negligible,
Q = [m(75 Se) − m(75 As)]c 2 = [74.922523 u − 74.921596 u](931.5
Then Q = K As + Eν − K e and neglecting the electron and As kinetic energies,
Eν = Q = 0.864 MeV
26.
(a) With 15 O → 15 N + e + + ν and assuming a negligible neutrino mass,
Q = [m(15 O) − m(15 N) − 2me ]c 2
= [15.003066 u − 15.000109 u](931.50 MeV/u) − 2(0.511 MeV) = 1.732 MeV
(b) With Q = K N + K e + Kν , the kinetic energy of the 15N is negligibly small and the
electrons have their maximum kinetic energy when the neutrino energy is zero. Thus
K e,max = Q = 1.732 MeV
27.
Let E1 = 0.000 MeV represent the ground state, and E2 = 0.412 MeV and E3 = 1.088 MeV
then represent the excited states. Neglecting the small recoil energy, the energies of the
emitted gamma rays are equal to the energy differences between the levels:
ΔE12 = E2 − E1 = 0.412 MeV − 0.000 MeV = 0.412 MeV
ΔE13 = E3 − E1 = 1.088 MeV − 0.000 MeV = 1.088 MeV
ΔE23 = E3 − E2 = 1.088 MeV − 0.412 MeV = 0.676 MeV
28.
(a) If we assume that 5 MeV is the kinetic energy of the alpha particle, then from
Equation 12.23 we can find the Q value to be Q = Kα A /( A − 4) , and combining this
result with Equation 12.21 we can find the recoil energy of the nucleus X′:
K X ′ = Q − Kα =
A
4
4
Kα − Kα =
Kα =
(5.0 MeV) = 0.10 MeV
A−4
A−4
196
(b) The gamma-ray recoil energy is given by Equation 12.38:
KR =
Eγ2
2 Mc 2
=
(5.0 MeV) 2
= 6.7 ×10−5 MeV = 67 eV
2(200 u)(931.5 MeV/u)
The recoil energy from the alpha decay is about three orders of magnitude larger than that
from the gamma decay.
260
ΔE10 = E1 − E0 = 100.1 keV – 0 = 100.1 keV
ΔE20 = E2 − E0 = 300.9 keV – 0 = 300.9 keV
ΔE21 = E2 − E1 = 300.9 keV – 100.1 keV = 200.8 keV
ΔE31 = E3 − E1 = 603.6 keV – 100.1 keV = 503.5 keV
ΔE32 = E3 − E2 = 603.6 keV – 300.9 keV = 302.7 keV
ΔE42 = E4 − E2 = 1010.0 keV – 300.9 = 709.1 keV
ΔE43 = E4 − E3 = 1010.0 keV – 603.6 = 406.4 keV
29. L = 1 → L = 0:
L = 2 → L = 0:
L = 2 → L = 1:
L = 3 → L = 1:
L = 3 → L = 2:
L = 4 → L = 2:
L = 4 → L = 3:
30.
1010.0
4
603.6
3
300.9
2
100.1
0.0
1
0
E
L
The ratio of the number of Th atoms to the number of Pb atoms is
R=
N Th mTh N A / M Th mTh M Pb (3.65 g)(208 g/mole)
=
=
=
= 4.36
N Pb mPb N A / M Pb mPb M Th (0.75 g)(232 g/mole)
10
t1/ 2
⎛ 1 ⎞ 1.41× 10 y ⎛ 1
⎞
t=
ln ⎜ + 1⎟ =
ln ⎜
+ 1⎟ = 4.2 × 109 y
0.693 ⎝ R ⎠
0.693
⎝ 4.36 ⎠
31.
232
90
Th142 →
208
82
Pb126 + Nα 24 He 2 + N e e − + N e ν
(a) Balancing the mass numbers, we obtain
232 = 208 + 4 N α
or
Nα = 6
(b) Balancing the electric charges, we obtain
90 = 82 + 2 N α − N e
or
Ne = 4
(c) Q = [m( 232 Th) − m( 208 Pb) − 6m( 4 He)]c 2
= [232.038050 u − 207.976636 u − 6(4.002603 u)](931.50 M
(d) The number of atoms in the sample is
N=
mN A (1000 g)(6.022 × 1023 atoms/mole)
=
= 2.60 × 1024 atoms
M
232 g/mole
261
a = λN =
0.693
(2.60 × 1024 ) = 4.07 × 106 s −1
7
(1.40 × 10 y)(3.156 × 10 s/y)
10
P = (42.659 MeV)(1.602 × 10−13 J/MeV)(4.07 × 106 s −1 ) = 27.8 μ W
3.5 decays/min = (12.4 decays/min)e − λt
32.
t=
ln(12.4 min −1 / 3.5 min −1 )
λ
=
1.26
= 1.04 × 104 y
0.693/ 5730 y
33. For 60° scattering with K = 28 MeV, Equation 6.8 gives
b=
zZ e 2
θ
(2)(82)
cot =
(1.440 MeV ⋅ fm)(cot30°) = 7.3 fm
2 K 4πε 0
2 2(28 MeV)
The minimum distance between alpha particle and nucleus is found from Equation 6.18:
K=K
2
rmin
−
b2
e 2 zZ
+
2
rmin
4πε 0 rmin
e 2 zZ
rmin − b2 = 0
4πε 0 K
or
2
rmin
− 8.43rmin − 53.35 = 0
with all distances expressed in fm. Using the quadratic formula, we find solutions for
rmin = 12.6 fm or −4.2 fm. The negative root is physically unacceptable, so we conclude
rmin = 12.6 fm
The nuclear radius of 208Pb is R = (1.2 fm)A1/3 = (1.2 fm)(208)1/3 = 7.1 fm. The minimum
distance is thus greater than the nuclear radius of 208Pb, and even when we include the
nuclear radius of the alpha particle (1.9 fm) we might question why the Rutherford
formula fails even when the projectile and target are still “outside” of each other’s
nuclear charge distributions. Figure 12.1 shows that the nuclear charge actually extends
1-2 fm beyond the computed mean radius, so the alpha particle charge distribution
extends to 3-4 fm and 208Pb to 8-9 fm. It is therefore not surprising that they begin to
overlap in the range of 12-13 fm.
34. For diffraction by a circular disk, the first minimum occurs at θ = sin −1 1.22λ / D . For
12
C at 420 MeV, θ = 51° and the diameter of the disk is
262
D=
1.22λ 1.22 hc (1.22)(1240 MeV ⋅ fm)
=
=
= 4.64 fm
sin θ sin θ E
(sin 51°)(420 MeV)
so
R = 2.32 fm
For 16O at 420 MeV, θ = 45° and
D=
1.22 hc (1.22)(1240 MeV ⋅ fm)
=
= 5.09 fm
sin θ E
(sin 45°)(420 MeV)
so
R = 2.54 fm
so
R = 2.63 fm
For 16O at 360 MeV, θ = 53° and
D=
35.
1.22 hc (1.22)(1240 MeV ⋅ fm)
=
= 5.26 fm
sin θ E
(sin 53°)(360 MeV)
We assume that the radiation is emitted by the source uniformly in all directions. It is
thus distributed over a sphere of radius R = 25 cm and area 4πR2, and the detector
receives a fraction of the radiation equal to the fraction of the area that it occupies. If as
represents the actual activity of the source and ad represents the activity measured by the
detector of radius r, then ad = as (π r 2 / 4π R 2 ) or
as = ad
2
4π R 2
−1 4π (25 cm)
=
= 1.39 × 106 s −1 = 37.5 μCi
(1250
s
)
π r2
π (1.5 cm)2
PV (5.0 × 105 N/m 2 )(125 × 10−6 m3 )
n=
=
= 0.0251 mole
RT
(8.31 J/mole ⋅ K)(300 K)
36.
N = (0.0251 mole)(6.022 × 1023 molecules/mole)(2 atoms/moleclule) = 3.02 × 1022 atoms
a = λN =
37.
0.693N
0.693(3.02 × 1022 )
=
= 5.39 × 1013 s −1 = 1460 Ci
t1/ 2
(12.3 y)(3.156 × 107 s/y)
(a) Let tn +1 = tn + Δt . The number of decays Nn between tn and tn+1 is
N n = N (tn ) − N (tn +1 ) = N 0e − λtn − N 0e − λtn +1 = N 0e − λtn (1 − e − λΔt ) ≅ N 0e − λ tn (λ Δt )
for Δt
1/ λ . The mean lifetime is then
τ=
1
N n tn = ∑ e − λtn tn λ Δt = λ ∑ e − λtn tn Δt
∑
N0 n
n
n
If the time interval Δt becomes infinitesimally small, the sum becomes an integral:
∞
τ = λ ∫ e − λt t dt
0
263
1
(b)
τ=
λ∫
(c)
τ=
1
∞
0
λ
=
e − λ t (λ t )d (λ t ) =
1
λ∫
0
t1/ 2
= 1.44t1/ 2
0.693
38. (a)
27
14
27
Si13 → 13
Al14 + e + + ν
(b)
74
33
−
As41 → 74
34Se 40 + e + ν
(c)
228
92
(d)
93
42
(e)
131
53
U136 → 42 He 2 +
224
90
∞
e − x x dx =
so
1
λ
[e − x ( − x − 1)]0∞ =
1
λ
τ > t1/ 2
Th134
Mo51 + e → Nb52 + ν
−
93
41
−
As78 → 131
54 Xe 77 + e + ν
39. 1.00 g of 239Pu is 1/239 mole or (6.022 × 1023)/239 = 2.52 × 1021 atoms. The activity is
a = λN =
0.693N
(0.693)(2.52 × 1021 )
=
= 2.30 × 109 s −1
t1/ 2
(2.41 × 104 y)(3.156 × 107 s/y)
The energy output per 239Pu nucleus is
Q = [m( 239 Pu) − m( 235 U) − m( 4 He)]c 2
= [239.052163 u − 235.043930 u − 4.002603 u](931.50 MeV/u) = 5.245 MeV
An energy output of 5.245 MeV = 8.404 × 10−13 J is released in each decay, and there are
2.30 × 109 decays per second, so the power output is
P = (8.404 × 10−13 J)(2.30 × 109 s −1 ) = 1.93 × 10−3 W
40.
The mass of 224Ra in its excited state is 224.020212 u +
The Q-value for the decay
Q = [ m(
228
Th) − m(
224
228
Th →
224
0.217 MeV
= 224.020445 u .
931.50 MeV/u
Ra + α is
Ra) − m( He)]c 2
4
= [228.028741 u − 224.020445 u − 4.002603 u](931.50 MeV/u) = 5.303 MeV
⎛ A−4⎞
⎛ 224 ⎞
Kα = Q ⎜
⎟ = (5.303 MeV) ⎜
⎟ = 5.210 MeV
⎝ A ⎠
⎝ 228 ⎠
264
41.
For 232Th, R = 1.2 A1/ 3 = 1.2(232)1/ 3 = 7.37 fm and
e 2 z ( Z − z ) (1.440 MeV ⋅ fm)(2)(88)
=
= 34.37 MeV
UB =
4πε 0
7.37 fm
R
e 2 z ( Z − z ) (1.440 MeV ⋅ fm)(2)(88)
=
= 63.20 fm
4πε 0 Kα
4.01 MeV
R′ =
2K
2(34.01 MeV)
v
=
=
= 0.135
2
3727 MeV
c
mc
U 0 = 12 (U B + Kα ) = 19.20 MeV so U 0 − Kα = 15.19 MeV
2m
k=
2
(U 0 − Kα ) =
2(3727 MeV)
(15.19 MeV) = 1.71 fm −1
2
(197 MeV ⋅ fm)
L=
R′ − R
= 27.92 fm so kL = 47.74
2
λ=
v −2 kL (0.135)(3.00 × 108 m/s) −2(47.74)
e
e
=
= 1.04 × 10−20 s−1
2R
2(7.37 × 10−15 m)
For 218Th, R = 1.2 A1/ 3 = 1.2(218)1/ 3 = 7.22 fm and
UB =
e 2 z ( Z − z ) (1.440 MeV ⋅ fm)(2)(88)
=
= 35.10 MeV
4πε 0
7.22 fm
R
R′ =
e 2 z ( Z − z ) (1.440 MeV ⋅ fm)(2)(88)
=
= 25.73 fm
4πε 0 Kα
9.85 MeV
2K
2(39.85 MeV)
v
=
=
= 0.146
2
3727 MeV
c
mc
U 0 = 12 (U B + Kα ) = 22.48 MeV so U 0 − Kα = 12.63 MeV
k=
2m
2
(U 0 − Kα ) =
2(3727 MeV)
(12.63 MeV) = 1.56 fm −1
(197 MeV ⋅ fm) 2
L=
R′ − R
= 9.26 fm so kL = 14.45
2
λ=
v −2 kL (0.146)(3.00 × 108 m/s) −2(14.45)
e
e
=
= 9.0 × 108 s −1
−15
2R
2(7.22 × 10 m)
265
42.
(a) For 226Ra, R = 1.2 A1/ 3 = 1.2(226)1/ 3 = 7.31 fm and
e 2 z ( Z − z ) (1.440 MeV ⋅ fm)(2)(86)
UB =
=
= 33.88 MeV
R
4πε 0
7.31 fm
R′ =
e 2 z ( Z − z ) (1.440 MeV ⋅ fm)(2)(86)
=
= 51.76 fm
4πε 0 Kα
4.785 MeV
v
2K
2(34.785 MeV)
=
=
= 0.1366
2
c
mc
3727 MeV
U 0 = 12 (U B + Kα ) = 19.33 MeV so U 0 − Kα = 14.545 MeV
2m
k=
2
(U 0 − Kα ) =
2(3727 MeV)
(14.545 MeV) = 1.67 fm −1
2
(197 MeV ⋅ fm)
L=
R′ − R
= 22.23 fm so kL = 37.12
2
λ=
v −2 kL (0.1366)(3.00 × 108 m/s) −2(37.12)
=
= 1.5 × 10−11 s −1
e
e
−15
2R
2(7.31 × 10 m)
A − 14
Q = 26.47 MeV .
A
e 2 z ( Z − z ) (1.440 MeV ⋅ fm)(6)(82)
UB =
=
= 96.92 MeV
R
4πε 0
7.31 fm
For 14C emission, Q = 28.215 MeV and K C =
R′ =
e 2 z ( Z − z ) (1.440 MeV ⋅ fm)(6)(82)
=
= 26.77 fm
4πε 0 Kα
26.47 MeV
v
2K
2(56.47 MeV)
=
=
= 0.093
2
c
mc
(14 u)(931.50 MeV/u)
U 0 = 12 (U B + K C ) = 61.70 MeV so U 0 − K C = 35.23 MeV
k=
L=
2m
2
(U 0 − K C ) =
2(14 u)(931.50 MeV/u)
(35.23 MeV) = 4.87 fm −1
(197 MeV ⋅ fm) 2
R′ − R
= 9.73 fm so kL = 47.39
2
v −2 kL (0.093)(3.00 × 108 m/s) −2(47.39)
=
= 1.4 × 10−20 s−1
e
e
λ=
−15
2R
2(7.31 × 10 m)
(b)
λC 1.4 × 10−20 s −1
=
= 1.1 × 10−9
λα 1.5 × 10−11 s−1
266
43. (a) In the decay n → p + e − + ν , assume the neutrino is of negligible mass and carries no
energy. Then
En = Ep + Ee = mp c 2 + K p + Ee
K p + Ee = mn c 2 − mp c 2 = (1.0086650 u − 1.0072765 u)(931.50 MeV/u) = 1.293 MeV
Momentum conservation (with the initial neutron at rest) gives pp = pe . The proton can
be treated nonrelativistically, but the electron is relativistic. With Ee2 = ( pe c ) 2 + ( mec 2 ) 2 ,
( K p − 1.293 MeV) 2 = Ee2 = ( pe c )2 + ( me c 2 ) 2 = ( ppc ) 2 + ( me c 2 ) 2 = 2mp K pc 2 + ( me c 2 ) 2
K p2 − (1879.15 MeV)K p + 1.412 MeV 2 = 0
Solving using the quadratic formula, we find two roots: 7.52 × 10−4 MeV and 1879.15
MeV. Only the smaller root is physically meaningful, so
Kp = 7.52 × 10−4 MeV
(b) For the neutrino to have its maximum energy, the electron must have a kinetic energy
of zero. In this case
En = mn c 2 = K p + mpc 2 + me c 2 + Eν
Eν = ( mn c 2 − mpc 2 − me c 2 ) − K p = 0.782 MeV − K p
In analogy with the results of part (a), we know that Kp will be small (of order 10−4
MeV). Thus to a good approximation Eν = 0.782 MeV , and with pp = pν = Eν / c ,
pp2
pν2
Eν2
(0.782 MeV) 2
=
=
=
= 3.26 × 10−4 MeV
Kp =
2
2mp 2mp 2mpc
2(938.3 MeV)
44. For
24
Na → 24 Mg + e − + ν ,
Q = [m( 24 Na) − m( 24 Mg)]c 2 = [23.990963 u − 23.985042 u](931.50 MeV/u) = 5.515 MeV
With Q = K Mg + K e + Eν and neglecting KMg, we obtain
Eν = Q − K e = 5.515 MeV − 2.15 MeV = 3.37 MeV
267
45. (a)
ΔE =
τ
=
Eγ2
(b)
K=
(c)
v=c
2mc 2
6.58 × 10−16 eV ⋅ s
= 4.67 × 10−9 eV
−9
141 × 10 s
=
(14.4 keV) 2
= 1.95 × 10−3 eV
2(56.935 u)(931.50 MeV/u)
ΔE
4.67 × 10−9 eV
=c
= 3.24 × 10−13 c = 0.097 mm/s
E
14.4 keV
46. The volume of CO2 in one breath is (0.0003)(0.5 L) = 1.5 × 10−4 L = 1.5 × 10−7 m3. The
number of CO2 molecules is then
N=
PV (1.01×105 Pa)(1.5 × 10−7 m3 )
=
= 3.75 × 1018
kT
(1.38 ×10−23 J/K)(293 K)
so the number of 14C atoms in the lungs will be about N14 = 10−12N = 3.75 × 106.
Because the decay constant λ gives the decay probability per nucleus per unit
time, the total probability for decay in a time interval Δt is
probability = λ N14 Δt =
0.693
(3.75 × 106 )(3.5 s) = 5.0 × 10−5
7
(5730 y)(3.155 × 10 s/y)
268
Chapter 13
This chapter broadens the previous study of nuclear science from Chapter 12 by
including nuclear reactions, including fission and fusion. To improve continuity, the
section fission opens with a discussion of fission as a competing mode of radioactive
decay for certain nuclei before moving on to neutron-induced fission. In this new edition
there is less discussion of them technology of reactors compared with the 2nd edition.
The discussion of fusion has been updated to include reference to the current facilities
attempting to exploit fusion by magnetic confinement and inertial confinement. Because
much current nuclear research is oriented toward studying astrophysics, a section on
nucleosynthesis has been added to this chapter.
Supplemental Materials
The Nuclear Science Wall Chart (Contemporary Physics Education Project, 1997)
contains much useful information about nuclear reactions. The accompanying on-line
guide (http://www.lbl.gov/abc/wallchart/guide.html) provides supporting information as
well as links to references and other sites. The content covers fission, fusion,
nucleosynthesis, transuranic elements, and applications of nuclear science.
Suggestions for Additional Reading
See the references listed in Chapter 12 for more detail on nuclear reactions. Other
references at about the same level as this chapter are:
H. Semat and J. R. Albright, Introduction to Atomic and Nuclear Physics (Holt, Rinehart
and Winston, 1972).
M. R. Wehr, J. A. Richards, and T. W. Adair, Physics of the Atom (Addison-Wesley,
1984). Particularly good discussion of fission reactors.
A detailed history of the development of fission is:
R. Rhodes, The Making of the Atomic Bomb (Simon and Schuster, 1986).
The natural fission reactor is discussed in:
G. A. Cowan, “A Natural Fission Reactor,” Scientific American 235, 36 (July 1976).
A. P. Meshik, “The Workings of an Ancient Nuclear Reactor,” Scientific American 293,
82 (November 2005).
For a comprehensive and nontechnical history of fusion, see:
R. Herman, Fusion: The Search for Endless Energy (Cambridge University Press, 1990).
T. K. Fowler, The Fusion Quest (Johns Hopkins University Press, 1997).
The history of progress in fusion power development can be traced through a series of
articles in Scientific American, including the following: W. C. Gough and B. J. Eastland,
“The Prospects of Fusion Power,” (February 1971); M. J. Lubin and A. P. Fraas, “Fusion
269
by Laser,” (June 1971); B. Coppi and J. Rem, “The Tokamak Approach in Fusion
Research,” (July 1972); J. L. Emmett, J. Nuckolls, and L. Wood, “Fusion Power by Laser
Implosion,” (June 1974); H. Furth, “Progress toward a Tokamak Fusion Reactor,”
(August 1979); R. W. Conn, V. A. Chuyanov, N. Inoue, and D. R. Sweetman, “The
International Thermonuclear Experimental Reactor,” (April 1992); M. Moyer, “Fusion’s
False Dawn,” (March 2010).
For more information on medical applications of nuclear physics, see:
N. A. Dyson, An Introduction to Nuclear Physics with Applications in Medicine and
Biology (Halsted Press, 1981).
More detail on the effects of radiation on living organisms can be found in:
S. C. Bushong, “Radiation Exposure in our Daily Lives,” The Physics Teacher, March
1977, p. 135.
For more information on the stable elements beyond uranium, see:
G. T. Seaborg and W. D. Loveland, The Elements Beyond Uranium (Wiley, 1990)
Materials for Active Engagement in the Classroom
A. Reading Quizzes
1. Energy is released in the fission of 238U because:
(1) the binding energy per nucleon increases with A for large A.
(2) the binding energy per nucleon decreases with A for large A.
(3) the binding energy per nucleon increases with A for small A.
(4) the binding energy per nucleon decreases with A for small A.
2. In the radioactive decays of fission fragments, the most common emitted particles
are:
(1) electrons
(2) positrons
(3) neutrons
(4) alphas
3. Producing electricity from fusion reactors is currently not practical because:
(1) the temperatures required to initiate the reaction in bulk matter are very high.
(2) the energy release per nucleon is very small.
(3) the nuclei needed for the reactions are found only in chemical elements that
are very rare in nature.
(4) fusion reactions occur only in the Sun and have never been achieved under
laboratory conditions on Earth.
4. In a nuclear fusion reaction such as 2H + 3H → 4He + n, the binding energy per
nucleon
(1) Increases
(2) Decreases
(3) Does not change
(4) Depends on the kinetic energy of the colliding particles
270
5. Thermonuclear fusion
(1) requires isotopes that are very scarce.
(2) requires extremely high temperatures.
(3) requires that the particles move at speeds close to the speed of light.
(4) presently is used to generate electricity in certain power plants.
Answers
1. 2
2. 1
3. 1
4. 1
5. 2
B. Conceptual or Discussion Questions
1. Without doing any calculations, which reaction would you expect to have the higher
Q value?
(1) 2H + 4He → 6Li (2) 3H + 3He → 6Li
2. Which of the following fusion reactions would you expect to release the most energy
per reacting nucleon?
(2) 12C + 12C
(3) 40Ca + 40Ca
(4) 56Fe + 56Fe
(1) 2H + 2H
3. Answer each of the following with:
(1) Fission
(2) Fusion
(3) Both
(a) Nuclei produced in the reaction are usually highly radioactive.
(b) Energy release can be as large as several MeV per reacting nucleon.
(c) It is usually necessary to overcome a Coulomb barrier for the reaction to occur.
(d) Usually induced by the capture of a neutron.
(e) Reacting nuclei come from commonly available chemical elements.
(f) Electrical power could be generated by boiling water using heat obtained from
kinetic energy of nuclei produced in the reaction.
Answers
1. 2
2. 1
3. (a) 1 (b) 2 (c) 2 (d) 1 (e) 2 (f) 3
Sample Exam Questions
A. Multiple Choice
1. Suppose a nucleus of
of
238
92
238
92
U fissions into two nuclei of
U , the total mass of the two
(a) the same
(b) larger
119
46
119
46
Pd . Compared with the mass
Pd is
(c) smaller
2. Fusion releases energy because the binding energy per nucleon:
(a) increases with increasing mass number at high mass numbers.
(b) increases with increasing mass number at low mass numbers.
(c) decreases with increasing mass number at high mass numbers.
(d) decreases with increasing mass number at low mass numbers.
271
3. The total nuclear binding energy of an alpha particle (a nucleus of 4He) is about 28
MeV. When 4 protons undergo fusion in the Sun to form an alpha particle, the total
energy released is about
(a) 7 MeV
(b) 14 MeV (c) 28 MeV (d) 56 MeV (e) 112 MeV
Answers
1. c
2. b
3. c
B. Conceptual
1. Would you expect the core of a fission reactor to emit mostly neutrinos, mostly
antineutrinos, or a roughly equal mixture of neutrinos and antineutrinos? EXPLAIN
YOUR ANSWER.
2. In the reactions 2H + 2H → 3He + n and 2H + 3H → 4He + n initiated in each case by
2
H with kinetic energy K incident on a target at rest, in which case would you expect
the total kinetic energy of the reaction products to be greater? EXPLAIN YOUR
ANSWER.
Answers
1. antineutrinos (because fission products have an excess of neutrons)
2. the large binding energy of 4He gives the second reaction a much larger
Q value and thus a much larger total kinetic energy
C. Problems
1. (a) The fusion reaction 2H + 2H → 3He + n is initiated by two 2H colliding head-on
with equal kinetic energies of 0.124 MeV. Find the total kinetic energy of the
products of this reaction. Atomic masses are: 2H – 2.014102 u, 3He – 3.016029 u.
(b) Find the kinetic energy of the neutron.
2. (a) The nucleus 14C (halflife 5730 y) is used in radiocarbon dating to determine the
age of previously living material. A certain sample of wood currently shows a decay
rate of 25.0 decays/s of 14C. The wood is taken from a structure that was built from a
tree that was cut 15,000 years ago. What would have been the 14C decay rate of this
wood sample when the tree was cut?
(b) Given that 14C has 6 protons and 8 neutrons and an atomic mass of 14.003242 u,
find the total binding energy (in MeV) of 14C. Use 1.008665 u for the neutron mass and
1.007825 u for the mass of a hydrogen atom.
(c) Suppose it were possible to form a nucleus of 14C by colliding two 37 Li nuclei. Is
energy absorbed or released in this process? (Choose which one.) Calculate the
energy absorbed or released in MeV. The mass of 37 Li is 7.016004 u.
Answers
1. (a) 3.52 MeV (b) 2.64 MeV
2. (a) 153 decays/s (b) 105.3 MeV (c) 26.8 MeV released
272
Problem Solutions
1. (a) 42 He 2 + 147 N 7 → 178 O9 + 11H 0
(c)
27
13
30
Al14 + 42 He 2 → 10 n1 + 15
P15
Be5 + 24 He 2 → 126 C6 + 10 n1
(d)
12
6
C6 + 12 H1 → 137 N 6 + 10 n1
(b)
9
4
2. Assuming the highest energy protons (16.2 MeV) lead to the ground state, the next
highest to the first excited state, and so forth, the energies of the excited states are
16.2 MeV − 14.8 MeV = 1.4 MeV
16.2 MeV − 8.9 MeV = 7.3 MeV
16.2 MeV − 11.6 MeV = 4.6 MeV
16.2 MeV − 6.7 MeV = 9.5 MeV
9.5
7.3
4.6
1.4
0.0
E (MeV)
3. Using the density of gold of 19.3 g/cm3, the mass of the foil is
m = ρV = (19.3 g/cm 3 )(π )(0.15 cm) 2 (1.81× 10−4 cm) = 2.47 × 10−4 g
Solving Equation 13.2 for the cross section, we find
σ=
RM
(5.37 × 106 s −1 )(197 g/mole)
=
= 9.8 × 10−23 cm 2 = 98 b
φ mN A (7.25 ×1010 neutrons/cm 2 /s)(2.47 × 10−4 g)(6.02 ×1023 mole−1 )
4. The mass of Co in the foil is (46 mg)(0.0044) = 0.202 mg, and the corresponding number
of Co nuclei is
N=
m
0.202 mg
NA =
6.02 × 1023 = 2.07 ×1021
M
58.9 g
and the neutron beam intensity is, from Equation 13.1,
I0 =
RS (1.07 × 1012 s-1 )(π )(0.50 cm) 2
=
= 1.1× 1013 s −1
−24
2
21
σN
(37 ×10 cm )(2.07 × 10 )
273
I0 =
5.
20 × 10−6 A
= 1.25 × 1014 protons/s
−19
1.60 × 10 C/proton
Let t represent the thickness of the target. Then
N ( N A ρ / M )V N A ρ t
=
=
S
S
M
=
(6.022 × 1023 atoms/mole)(10.5 g/cm3 )(4.5 × 10−4 cm)
= 2.65 × 1019 atoms/cm 2
107 g/mole
Because 3 neutrons are produced in each reaction, the reaction rate R is 13 (8.5 × 106 s−1 ).
R / I 0 13 (8.5 × 106 s −1 ) /(1.25 × 1014 s−1 )
=
= 8.6 × 10−28 cm 2 = 8.6 × 10−4 b
σ=
19
−2
N /S
2.65 × 10 cm
6. The irradiated target has a thickness of 2.5 μm and a diameter of 0.50 cm. Its mass is
m = ρV = (8.96 g/cm3 )(2.5 × 10−4 cm)π (0.25 cm)2 = 4.40 × 10−4 g
N = (6.022 × 1023 atoms/mole)
I0 =
R=
4.40 × 10−4 g
= 4.20 × 1018 atoms
63 g/mole
7.5 × 10−6 A
= 2.34 × 1013 particles/s
−19
2(1.6 × 10 C/particle)
I 0σ N (2.34 × 1013 s−1 )(1.25 × 10−24 cm 2 )(4.20 × 1018 )
=
= 6.26 × 108 neutrons/s
2
S
π (0.25 cm)
7. From Equation 13.6, the fraction of the maximum activity f = a (t ) / R
is f = 1 − e − λt = 1 − e −0.693t / t1/ 2 = 1 − (0.5)t / t1/ 2
(a) at t = t1/ 2
f = 1 − (0.5)1 = 0.5
8.
9.
(b) at t = 2t1/ 2
f = 1 − (0.5) 2 = 0.75
(c) at t = 4t1/ 2
f = 1 − (0.5) 4 = 0.9325
p + 56 Fe → 56 Co + n
4
He + 55 Mn → 56 Co + 3n
H + 56 Fe → 56 Co + 2n
3
He + 55 Mn → 56 Co + 2n
2
H + 54 Fe → 56 Co + γ
2
H + 58 Ni → 56 Co + 4 He
2
dN
d ⎡R
⎤
+ λ N = ⎢ (1 − e − λt ) ⎥ + R (1 − e − λt ) = Re − λt + R(1 − e − λt ) = R
dt
dt ⎣ λ
⎦
274
10. (a) The number of nitrogen molecules in the cell is
PV (2.25 atm)(1.01× 105 Pa/atm)(0.0124 m)3
N=
=
= 1.07 × 1020
−23
kT
(1.38 × 10 J/K)(293 K)
and the number of nitrogen nuclei is twice that, or 2.14 × 1020. The incident beam
contains I0 = (2.05 × 10−6 C/s)/(1.60 × 10−19 C/deuteron) = 1.28 × 1013 deuterons/s. The
reaction rate is then
R=
σN
S
I0 =
(0.21× 10−28 m 2 )(2.14 × 1020 )
(1.28 × 1013 s −1 ) = 4.03 × 108 s −1
(0.0124 m) 2
a = R(1 − e− λt ) = (4.03 × 108 s −1 )(1 − e− (0.693)(60 s) /(122 s) ) = 1.16 × 108 s −1 = 3.14 mCi
(b)
11. With φσ = (2.5 × 1013 neutrons/cm 2 ⋅ s)(0.53 × 10−24 cm 2 /atom) = 1.33 × 10−11 s −1atom −1 ,
R = φσ
⎛ 1.0 × 10−6 g ⎞ ⎛
m
23 atoms ⎞
5 −1
N A = (1.33 × 10−11 s −1atom −1 ) ⎜
⎟ = 3.47 × 10 s
⎟ ⎜ 6.022 × 10
M
mole ⎠
⎝ 23.0 g/mole ⎠ ⎝
a = R(1 − e − λt ) = (3.47 × 105 s −1 )(1 − e −0.693(4 h)/(15 h) ) = 5.85 × 104 s −1 = 1.58 μCi
12.
1
2
mx ( v x − v ) 2 + 12 m X ( − v ) 2 + mx c 2 + m X c 2 = m y c 2 + mY c 2
Substituting v = v x mx /(mx + m X ) , we obtain
2
1
2
2
⎛
⎛
vm ⎞
vm ⎞
mx ⎜ v x − x x ⎟ + 12 m X ⎜ − x x ⎟ = ( m y + mY − mx − m X )c 2 = −Q
mx + m X ⎠
⎝
⎝ mx + m X ⎠
1
2
⎡
m X2
mx m X ⎤
+
= −Q
mx v x2 ⎢
2
2⎥
⎣ ( mx + m X ) (mx + m X ) ⎦
⎡ mX
K th ⎢
⎣ mx + m X
⎤
⎥ = −Q
⎦
or
275
⎡ m ⎤
K th = −Q ⎢1 + x ⎥
⎣ mX ⎦
13. (a) p + 55 Mn → 54 Fe + 2n
Q = [m(1 H) + m(55 Mn) − m(54 Fe) − 2m(n)]c 2
= [1.007825 u + 54.938045 u − 53.939611 u − 2(1.008665 u)](931.50 MeV/u)
= −10.313 MeV
(b) 3 He + 40 Ar → 41K + 2 H
Q = [m( 3 He) + m( 40 Ar) − m( 41 K) − m( 2 H)]c 2
= (3.016029 u + 39.962383 u − 40.961826 u − 2.014102 u)](931.50 MeV/u)
= 2.314 MeV
14. (a)
Li + n → 3H + 4 He
Q = [m(6 Li) + m(n) − m(3 H) − m( 4 He)]c 2
6
= (6.015123 u + 1.008665 u − 3.016049 u − 4.002603 u)(931.50 MeV/u)
= 4.784 MeV
(b) p + 2 H → 2p + n
Q = [m(1 H) + m( 2 H) − 2m(1 H) − m(n)]c 2
= [1.007825 u + 2.014102 u − 2(1.007825 u) − 1.008665 u](931.50 MeV/u)
= −2.224 MeV
(c)
Li + 2 H → 8 Be + n
Q = [m(7 Li) + m( 2 H) − m(8 Be) − m(n)]c 2
7
= (7.016005 u + 2.014102 u − 8.005305 u − 1.008665 u)(931.50 MeV/u)
= 15.032 MeV
15.
2
H + 3He → p + 4 He
Q = [m( 2 H) + m( 3 He) − m(1 H) − m( 4 He)]c 2
= (2.014102 u + 3.016029 u − 1.007825 u − 4.002603 u)(931.50 MeV/u)
= 18.353 MeV
Let y = p, Y = 4He, x = 2H. Then Q = K y + KY − K x , so
K y + KY = Q + K x = 18.353 MeV + 5.00 MeV = 23.353 MeV
p 2y
2m y
+
pY2
= 23.353 MeV
2mY
276
p x = 2m x K x =
1
1
2m x c 2 K x =
2(2.014102 u)(931.50 MeV/u)(5.00 MeV) = 137.0 MeV/c
c
c
Momentum conservation gives p y = px − pY = 137.0 MeV/c − pY . Substituting into the
energy equation gives
(137.0 MeV/c − pY )2
p2
+ Y = 23.353 MeV
2m y
2mY
⎡ 1
1 ⎤ 137.0 MeV
(137.0 MeV) 2
c 2 pY2 ⎢
+
−
cp
+
− 23.353 MeV = 0
⎥
Y
2
2mY c 2 ⎥⎦
2m y c 2
myc2
⎢⎣ 2m y c
Solving for pY using the quadratic formula, we obtain
cpY = 288.4 MeV or −69.5 MeV
The first solution corresponds to the 4He moving in the same direction as the original 2H,
while the protons move in the opposite direction
( cp y = 137.0 MeV − cpY = −151.4 MeV ). The kinetic energies are
KY =
( cpY ) 2
(288.4 MeV) 2
=
= 11.152 MeV
2mY c 2 2(4.002603 u)(931.50 MeV/u)
K y = 23.353 MeV − 11.152 MeV = 12.201 MeV
The second solution gives 4He moving opposite to the original direction of the 2H, with
kinetic energy
(69.5 MeV) 2
KY =
= 0.647 MeV
2(4.002603 u)(931.50 MeV/u)
K y = 23.353 MeV − 0.647 MeV = 22.706 MeV
16. (a)
p + 4 He → 2 H + 3He
Q = [m(1 H) + m( 4 He) − m( 2 H) − m( 3 He)]c 2
= (1.007825 u + 4.002603 u − 2.014102 u − 3.016029 u)(931.50 MeV/u)
= −18.353 MeV
(b) For protons incident on 4He, x = 1H and X = 4He:
277
⎛
m(1 H) ⎞
⎛ 1.007825 u ⎞
K th = −Q ⎜1 + 4
⎟ = (18.353 MeV) ⎜1 +
⎟ = 22.974 MeV
⎝ 4.002603 u ⎠
⎝ m( He) ⎠
(c) For 4He incident on protons, x = 4He and X = 1H:
⎛ m( 4 He) ⎞
⎛ 4.002603 u ⎞
K th = −Q ⎜1 +
⎟ = (18.353 MeV) ⎜ 1 +
⎟ = 91.242 MeV
1
m( H) ⎠
⎝ 1.007825 u ⎠
⎝
17. (a) The Q value is
Q = [m( 254 Cf ) − 2m(127 In)]c 2
= [254.087323 u − 2(126.917353 u)](931.5 MeV/u) = 235.3 MeV
(b) Q = [m( 254 Cf ) − m(140 Xe) − m(110 Ru) − 4m(n)]c 2
= (254.087323 u − 139.921641 u − 109.914136 u − 4(1.00866
= 202.0 MeV
18. The number of 235U atoms in 1000 g of U (= 30 g of 235U) is
(30 g)(6.022 × 1023 atoms/mole)
= 5.9 × 1022 atoms
235 g/mole
If each fission releases about 200 MeV, the total energy released is
E = (200 MeV/atom)(5.9 × 1022 atoms) = 1.2 × 1031 eV = 1.9 × 1012 J
19. (a)
(b)
ΔE = [m( 235 U) + m(n) − m( 236 U)]c 2
= (235.043930 u + 1.008665 u − 236.045568 u)(931.50 MeV/u) = 6.546 MeV
ΔE = [m(238 U) + m(n) − m(239 U)]c2
= (238.050788 u + 1.008665 u − 239.054293 u)(931.50 MeV/u) = 4.807 MeV
(c) If 235U + n gives enough energy of excitation to make the 236U fission easily, then
U + n needs about 1.7 MeV of additional energy to reach the same state of excitation
and therefore to have about the same probability to fission. This additional energy must
come from the incident neutrons, so 238U can be fissioned easily only by “fast” neutrons
with 1-2 MeV of kinetic energy.
238
(d)
ΔE = [m(239 Pu) + m(n) − m(240 Pu)]c2
= (239.052163 u + 1.008665 u − 240.053814 u)(931.50 MeV/u) = 6.534 MeV
278
Because 239Pu + n has about the same relative excitation as 235U + n, we expect that 239Pu
(like 235U) can be easily fissioned by slow neutrons.
Q = [m( 235 U) + m(n) − m( 93 Rb) − m(141 Cs) − 2m(n)]c 2
= (235.043930 u − 92.922042 u − 140.920046 u − 1.008665 u)(931.50 MeV/u)
20.
= 179.94 MeV
21. (a)
12
C + 1H →
13
N+γ
Q = [m( C) + m( H) − m(13 N)]c 2
12
1
= (12.000000 u + 1.007825 u − 13.005739 u)(931.50 MeV/u) = 1.943 MeV
N → 13C + e + + ν
Q = [m(13 N) − m(13 C) − 2m(e)]c 2
13
= (13.005739 u − 13.003355 u − 2 × 0.0005486 u)(931.50 MeV/u) = 1.199 MeV
13
C + 1H →
14
N+γ
Q = [m( C) + m( H) − m(14 N)]c 2
13
1
= (13.003355 u + 1.007825 u − 14.003074 u)(931.50 MeV/u) = 7.551 MeV
14
N + 1H →
O+γ
15
Q = [m( N) + m( H) − m(15 O)]c 2
14
1
= (14.003074 u + 1.007825 u − 15.003066 u)(931.50 MeV/u) = 7.296 MeV
O → 15 N + e + + ν
Q = [m(15 O) − m(15 N) − 2m(e)]c 2
15
= (15.003066 u − 15.000109 u − 2 × 0.0005486 u)(931.50 MeV/u) = 1.732 MeV
N + 1H → 12C + 4 He
Q = [m(15 N) + m(1 H) − m(12 C) − m( 4 He)]c 2
15
= (15.000109 u + 1.007825 u − 12.000000 u − 4.002603 u)(931.50 MeV/u)
= 4.966 MeV
(b) When the 6 reactions or decays are combined, 4 electrons must be added to each side
of the equations, as in the proton-proton cycle. (Two electrons are necessary to balance
each of the two positron decays in the carbon cycle.) The net Q value is then the sum of
the Q values for the 6 processes plus 4mec2, which gives 26.7 MeV.
279
22.
2
H + 3H → 4 He + n
Q = [m( 2 H) + m(3 H) − m( 4 He) − m(n)]c 2
= (2.014102 u + 3.016049 u − 4.002603 u − 1.008665 u)(931.50 MeV/u)
= 17.590 MeV
23.
H + 3H → 4 He + n with Q = K He + K n = 17.6 MeV , neglecting the initial kinetic
energies of the 2H and 3H (which are less then 0.01 MeV for temperatures up to 108 K).
Making also the approximation that the initial momentum is small, conservation of
momentum then gives pHe + pn = 0, or pHe = − pn .
2
Q = K He + K n =
Kn =
24. (a)
2
⎛
pHe
p2
p2
p2
p2 ⎛
m ⎞
m ⎞
+ n = n + n = n ⎜1 + n ⎟ = Kn ⎜1 + n ⎟
2mHe 2mn 2mHe 2mn 2mn ⎝ mHe ⎠
⎝ mHe ⎠
Q
17.6 MeV
=
= 14.1 MeV
1 + mn / mHe
1 + 0.25
nτ ≥ 1020 s ⋅ m −3
n≥
for τ = 0.60 s
1020 s ⋅ m −3
τ
=
1020 s ⋅ m −3
= 1.67 × 1020 m −3
0.60 s
(b) For n = 1.67 × 1021 m−3, Figure 13.16 indicates T > 1.5 × 108 K.
25.
4
He + 4 He + 4 He → 12C
Q = [3m( 4 He) − m(12 C)]c 2
= (3 × 4.002603 u − 12.000000 u)(931.50 MeV/u) = 7.274 MeV
This energy is about 0.6 MeV per reacting nucleon, far smaller than the 6.7 MeV per
reacting nucleon that is released in the fusion of 4 protons to form 4He.
26. We must first find the Coulomb barrier that keeps the helium nuclei from coming
together. To find the potential energy of two helium nuclei that just touch at their
surfaces, we need the nuclear radius, R = 1.2 A1/ 3 = 1.2(4)1/ 3 = 1.9 fm . When the charges
of +2e are separated by a distance of 2R, the potential energy is
1 q1q2
1
(2e) 2
2(1.440 MeV ⋅ fm)
U=
=
=
= 1.5 MeV
4πε 0 r
4πε 0 2(1.9 fm)
1.9 fm
We could overcome this barrier if each helium had a kinetic energy of 0.75 MeV. The
corresponding temperature is determined from K = 23 kT :
280
T=
27.
63
Cu + n → 64 Cu
K
0.75 MeV
=
= 5.8 × 109 K
−5
1.5k 1.5(8.6 × 10 eV/K)
(t1/ 2 = 13 h)
69
64
Cu → 64 Zn + e − + ν
64
Zn + n → 65 Zn
(t1/ 2 = 244 d)
70
65
Zn → 65Cu + e + +ν
65
Cu + n → 66 Cu
(t1/ 2 = 5 m)
71
Cu → 66 Zn + e − + ν
66
Zn + n → 67 Zn
(stable)
67
68
Zn + n → Zn
(stable)
68
69
Zn + n → Zn
(t1/ 2 = 56 m)
72
(t1/ 2 = 21 m)
Ga → 70 Ge + e − + ν
70
Ge + n → 71Ge
(t1/ 2 = 11 d)
Ge + e − → 71Ga +ν
71
Ga + n → 72 Ga
(t1/ 2 = 14 h)
Ga → 72 Ge + e − + ν
72
Ge + n → 73Ge
(stable)
73
74
Ge + n → Ge
(stable)
74
75
Ge + n → Ge
(t1/ 2 = 83 m)
66
28.
Ga + n → 70 Ga
69
Zn → 69 Ga + e − + ν
75
Ge → 75 As + e − +ν
81
Br + n → 82 Br
89
Sr → 89 Y + e − +ν
82
Br → 82 Kr + e − +ν
89
Y + n → 90 Y
Kr + n → Kr
83
Kr + n → 84 Kr
84
Kr + n → 85 Kr
82
83
(t1/ 2 = 35 h)
(stable)
(stable)
(t1/ 2 = 11 y)
85
Kr + n → 86 Kr
(stable)
92
93
Zr + n → Zr
(t1/ 2 = 1.5 × 106 y)
86
Kr + n → 87 Kr
87
Kr → 87 Rb + e − +ν
87
Rb + n → 88 Rb
95
(t1/ 2 = 76 m)
Zr → Nb + e − + ν
88
90
−
93
Zr + n → 94 Zr
(stable)
94
Zr + n → 95 Zr
(t1/ 2 = 64 d)
95
Nb → 95 Mo + e − + ν
(t1/ 2 = 18 m)
95
Rb → Sr + e + ν
88
Sr + n → 89Sr
(t1/ 2 = 51 d) (
88
(t1/ 2 = 64 h)
Y → Zr + e + ν
90
Zr + n → 91Zr
(stable)
91
92
Zr + n → Zr
(stable)
90
(t1/ 2 = 35 d)
−
)
29. Let the alpha particle move with velocity v before the collision. After the collision, the
alpha particle moves (in the reverse direction) with velocity v′ and kinetic energy K′, and
the atom moves with recoil velocity vR and kinetic energy KR. We assume the kinetic
energies to be nonrelativistic.
Conservation of energy: K = K ′ + K R
mv 2 = 12 mv′2 + 12 MvR2
m
( v + v′)
Conservation of momentum: mv = MvR − mv′ or vR =
M
or
1
2
281
2
m 2
⎡m
⎤
( v − v′2 ) = vR2 = ⎢ ( v + v′) ⎥ and so
Combining these two equations, we obtain
M
⎣M
⎦
v − v′ =
m
(v + v′)
M
⎛1− m / M ⎞
v′ = v ⎜
⎟
⎝1+ m / M ⎠
or
⎡ ⎛ 1 − m / M ⎞2 ⎤
⎛ v′2 ⎞
⎡ 4m / M ⎤
ΔK = mv − mv′ = K ⎜ 1 − 2 ⎟ = K ⎢1 − ⎜
⎟ ⎥=K⎢
2⎥
v ⎠
⎣ (1 + m / M ) ⎦
⎝
⎣⎢ ⎝ 1 + m / M ⎠ ⎥⎦
2
1
2
63
30. (a)
⎡ 4m / M ⎤
⎡ 4(4 / 63) ⎤
ΔK = K ⎢
= (2.50 MeV) ⎢
= 0.561 MeV
2⎥
2⎥
⎣ (1 + m / M ) ⎦
⎣ (1 + 4 / 63) ⎦
Cu:
107
Ag:
⎡ 4m / M ⎤
⎡ 4(4 /107) ⎤
ΔK = K ⎢
= (2.50 MeV) ⎢
= 0.347 MeV
2⎥
2⎥
⎣ (1 + m / M ) ⎦
⎣ (1 + 4 /107) ⎦
197
Au:
⎡ 4m / M ⎤
⎡ 4(4 /197) ⎤
ΔK = K ⎢
= (2.50 MeV) ⎢
= 0.195 MeV
2⎥
2⎥
⎣ (1 + m / M ) ⎦
⎣ (1 + 4 /197) ⎦
65
(b)
2
1
2
⎡ 4m / M ⎤
⎡ 4(4 / 65) ⎤
ΔK = K ⎢
= (2.50 MeV) ⎢
= 0.546 MeV
2⎥
2⎥
⎣ (1 + m / M ) ⎦
⎣ (1 + 4 / 65) ⎦
Cu:
109
⎡ 4m / M ⎤
⎡ 4(4 /109) ⎤
ΔK = K ⎢
= (2.50 MeV) ⎢
= 0.342 MeV
2⎥
2⎥
⎣ (1 + m / M ) ⎦
⎣ (1 + 4 /109) ⎦
Ag:
The energy difference is 0.015 MeV for Cu and 0.005 MeV for Ag.
31. (a)
Pu → 234 U + α
Q = [m( 238 Pu) − m( 234 U) − m( 4 He)]c 2
238
= (238.049560 u − 234.040952 u − 4.002603 u)(931.50 MeV/u) = 5.594 MeV
(b)
1.0 g =
1
238
a = λN =
mole =
1
238
(6.022 × 1023 atoms) = 2.53 × 1021 atoms
0.693
2.53 × 1021 atoms = 6.30 × 1011 s −1
(88 y)(3.16 × 107 s/y)
P = aQ = (6.30 × 1011 decays/s)(5.594 MeV/decay)(1.60 × 10−13
32. Titanium:
R = a (1 − e − λt ) −1 =
105 s −1
1 − e −0.693(2.5 min)/(5.8 min) )
282
= 407 s −1
N=
R
407 s −1
= 9.68 × 1014 atoms of 50Ti
12
2
−24
2
(3.0 × 10 n/cm /s)(0.14 × 10 cm )
=
φσ
Titanium is 5.25% 50Ti, so the total number N of titanium atoms is
9.68 × 1014 / 0.0525 = 1.84 × 1016 . With N = N A m / M ,
m=
NM (1.84 × 1016 atoms)(47.9 g/mole)
=
= 1.47 μ g
NA
6.022 × 1023 atoms/mole
R = a (1 − e − λt ) −1 =
Cobalt:
N=
R
φσ
=
12 s −1
1− e
−0.693(2.5 min)/[(5.27 y)(5.26×105 min/y)]
)
= 1.92 × 107 s −1
1.92 × 107 s −1
= 3.36 × 1017 atoms of 59Co
12
2
−24
2
(3.0 × 10 n/cm /s)(19 × 10 cm )
m=
NM (3.36 × 1017 atoms)(58.9 g/mole)
=
= 33 μ g
NA
6.022 × 1023 atoms/mole
33. The total number of copper atoms in the target is
N=
mN A (2.0 × 10−3 g)(6.022 × 1023 atoms/mole)
=
= 1.90 × 1019 atoms
M
63.5 g/mole
For 63Cu + n → 64Cu, N ( 63 Cu) = 0.69 N (Cu) = 0.69(1.90 × 1019 ) = 1.31 × 1019 atoms
a
(72 × 10−6 Ci)(3.7 × 1010 s −1 / Ci)
R=
=
= 2.94 × 108 s −1
− λt
−0.693(10 min)/[(12.7 h)(60 min/h)]
1− e
1− e
From Equation 13.2,
σ=
RM
R
2.94 × 108 s −1
=
=
= 4.49 × 10−24 cm 2 = 4.49 b
12
2
19
φ mN A φ N (5.0 × 10 n/cm /s)(1.31 × 10 )
For 65Cu + n → 66Cu, N ( 65 Cu) = 0.31N (Cu) = 0.31(1.90 × 1019 ) = 0.589 × 1019 atoms
R=
a
(1.30 × 10−3 Ci)(3.7 × 1010 s −1 / Ci)
=
= 6.47 × 107 s −1
1 − e − λt
1 − e −0.693(10 min)/(5.1 min)
283
σ=
RM
R
6.47 × 107 s −1
=
=
= 2.20 × 10−24 cm 2 = 2.20 b
12
2
19
φ mN A φ N (5.0 × 10 n/cm /s)(0.589 × 10 )
34. (a) The number of atoms in the target is N = mN A / M = ρ AN A dx / M = nAdx
where n = ρ N A /M is the number of target nuclei per unit volume. The rate at which
reactions occur in the target is
R = φσ
m
N A = φσ nAdx = Iσ n dx
M
where the neutron beam intensity I (neutrons/s) is φA. The beam therefore loses intensity
dI:
dI = − I σ n dx
(b) The total absorption after passing through a thickness x is
∫
x
dI
= − ∫ σ n dx
0
I0 I
I
ln I − ln I 0 = −σ nx
(c)
n=
ρ NA
M
=
I = I 0e −σ nx
or
(8.95 g/cm3 )(6.022 × 1023 atoms/mole)
= 8.49 × 1022 atoms/cm3
63.5 g/mole
nσ = (8.49 × 1022 atoms/cm3 )(5.0 × 10−24 cm 2 ) = 0.424 cm −1
x = 1.0 mm = 0.10 cm: I / I 0 = e − nσ x = e − (0.424 cm
x = 1.0 cm: I / I 0 = e − nσ x = e − (0.424 cm
−1
)(1.0 cm)
4
He + 7 Li →
11
)(0.10 cm)
= 0.958 so 4.2% is lost.
= 0.654 so 34.6% is lost.
x = 1.0 m = 100 cm: I / I 0 = e − nσ x = e − (0.424 cm
35.
−1
−1
)(100 cm)
= 3.85 × 10−19 so all is absorbed.
Be + γ
Q = [m( He) + m(7 Li) − m(11 B)]c 2
4
= (4.002603 u + 7.016005 u − 11.009305 u)(931.50 MeV/u) = 8.666 MeV
Neglecting the energy of the incident particles,
Q = K B + Eγ
and
284
pB = pγ
pγ2
Eγ2
pB2
+ Eγ =
+ Eγ =
+ Eγ
K B + Eγ =
2mB
2mB
2mBc 2
Eγ2
2mBc 2
+ Eγ − Q = 0
)
(
Eγ = −1 ± 1 + 4Q / 2mBc 2 mBc 2 = 8.662 MeV
The kinetic energy of the boron is only 0.004 MeV, but it is not negligible at the
precision of this calculation.
36.
γ + 7 Li → 3 H + 4 He
Q = [m(7 Li) − m(3 H) − m( 4 He)]c 2
= (7.016005 u − 3.016049 u − 4.002603 u)(931.50 MeV/u) = −2.4657 MeV
With the 7Li at rest, energy conservation gives Q = K H + K He − Eγ . Similarly,
conservation of momentum gives pγ = pH + pHe . If we supply only the minimum
gamma-ray energy, the 3H and 4He will move together, as in a reaction at threshold.
With vH = vHe = v , we have
pγ
Eγ
pγ = mH v + mHev
so
v=
=
mH + mHe c(mH + mHe )
Q = − Eγ + K H + K He = − Eγ + ( mH + mHe ) v = − Eγ + ( mH + mHe )
1
2
2
1
2
Eγ2
2( mH + mHe )c 2
(
1
2
Eγ2
c 2 ( mH + mHe ) 2
− Eγ − Q = 0
)
Eγ = 1 ± 1 + 4Q / 2(mH + mHe )c 2 (mH + mHe )c 2 = 2.4661 MeV
The gamma ray must supply the energy to break up the 7Li (2.4657 MeV) plus an
additional 0.0004 MeV to give the kinetic energies to the products that is necessary to
conserve momentum.
37.
Cd + n → 114 Cd + γ
Q = [m(113 Cd) + m(n) − m(114 Cd)]c 2
113
= (112.904402 u + 1.008665 u − 113.903359 u)(931.50 MeV/u) = 9.043 MeV
Energy conservation gives Q = K Cd + Eγ − K n , where KCd is the kinetic energy given to
the product 114Cd (the original nucleus 113Cd being at rest). The neutron kinetic energy
(0.025 eV) is negligible. We then have
285
K Cd + Eγ = 9.043 MeV
Momentum conservation gives pn = pCd + pγ , and with pn negligibly small, we get
pCd = − pγ . The heavy Cd nucleus can take this much momentum at a cost of very little
energy, so we can neglect KCd to obtain
Eγ = 9.043 MeV
We can check these assumptions by computing the kinetic energy of the Cd nucleus. The
result is 4 × 10−4 MeV, which is indeed negligible within the precision of the numbers
used in this problem.
38.
ΔK
4m / M
=
(1 + m / M )2
K
with m = 1 u (neutron)
ΔK 4
= 2 = 1 (all kinetic energy is lost)
K
2
ΔK
4(1/ 2)
M = 2 u (deuteron):
=
= 0.89
(1 + 1/ 2) 2
K
ΔK
4(1/12)
M = 12 u (carbon):
=
= 0.28
(1 + 1/12) 2
K
(a) M = 1 u (hydrogen):
(b) After one scattering, the new kinetic energy is
4mM
⎛1− m / M ⎞
K ′ = K − ΔK = K − K
= K⎜
⎟
2
(1 + m / M )
⎝1+ m / M ⎠
2
After n scatterings, the kinetic energy is
⎛1− m / M ⎞
K′ = K ⎜
⎟
⎝1+ m / M ⎠
2n
⎛ 1 − 1/12 ⎞
0.025 eV = 2.0 MeV ⎜
⎟
⎝ 1 + 1/12 ⎠
n=
39.
2n
log[(0.025 eV) /(2 × 106 eV)]
= 54.5 or 55 scatterings
2 log(11/13)
(a) The number of molecules of water is
6.022 × 1023 molecules/mole
N=
(100 cm3 )(1 g/cm3 ) = 3.3 × 1024 molecules
18 g/mole
286
The number of D2O molecules is 0.015% of this, or 5.0 × 1020. Each molecule includes 2
deuterons, but each fusion reaction takes 2 deuterons, so that consuming all of the D2O
would result in 5.0 × 1020 fusion reactions, each of which releases 4.0 MeV. The total
energy release is
E = (5.0 × 1020 reactions)(4.0 MeV/reaction) = 2.0 × 1021 MeV = 3.2 × 108 J
(b) If only 2/3 of the deuterium participated in the first reaction, the energy released
would be 2/3 of that found in part (a), or 2.1 × 108 J. Each reaction produces a single 3H,
so the number of 3H produced is 13 (5.0 × 1020 ) . These 3H then react with the remaining
1
3
(5.0 × 1020 ) deuterons, with each reaction releasing 17.6 MeV for an energy release of
E = 13 (5.0 × 1020 reactions)(17.6 MeV/reaction) = 2.9 × 1021 MeV = 4.7 × 108 J
The total energy released in the combined set of processes is
E = 2.1 × 108 J + 4.7 × 108 J = 6.8 × 108 J
More than twice as much energy is obtained from this second set of processes.
40.
(a) 4 He + 4 He → 8 Be
Q = [2m( 4 He) − m(8 Be)]c 2
= (2 × 4.002603 u − 8.005305 u)(931.50 MeV/u) = −0.092 MeV
(b) At a temperature T, the relative number of helium pairs with energy ΔE = 0.092 MeV
is approximately given by the Boltzmann factor
1
2
e −ΔE / kT = 12 e − (0.092 MeV)/(8.62×10
−5
eV/K)(108 K)
= 1.12 × 10−5
The factor of ½ is necessary because we need to know the number of He pairs that have
the necessary energy.
287
Chapter 14
This chapter provides an introduction to particle physics, including classifications
of particles, decays and reactions of particles, and a brief introduction to the explanation
of particle structure in terms of quarks. The emphasis is on achieving a basic
phenomenological understanding of the underlying structure of matter, rather than
acquiring the mathematical skills necessary to analyze that structure.
Supplemental Materials
Current listings of particle properties, quark contents, and decay modes can be
found in the tables published by the Particle Data Group at the Lawrence Berkeley
National Laboratory: http://pdg.lbl.gov/.
For an interactive and animated tour through the world of particle physics, see
The Particle Adventure, also from the LBNL Particle Data Group:
http://particleadventure.org/index.html.
A similar hands-on tutorial from CERN is at:
http://hands-on-cern.physto.se/hoc_v21en/index.html.
And another from Fermilab:
http://ed.fnal.gov/projects/labyrinth/games/index1.html.
For interactive questions interpreting bubble chamber tracks, see
http://epweb2.ph.bham.ac.uk/user/watkins/seeweb_feb99/BubbleChamber.htm.
Suggestions for Additional Reading
Advanced books on particle physics tend to be mathematically difficult, full of field
theory and relativistic quantum mechanics. Fortunately there are many popular-level
books and articles that can be read for background material. These are generally
descriptive and nonmathematical. For example, see
G. Feinberg, What is the World Made Of? (Anchor Press, 1977).
J. C. Polkinghorne, The Particle Play (W. H. Freeman, 1981).
C. Schwarz, A Tour of the Subatomic Zoo (American Institute of Physics, 1992).
R. Gilmore, The Wizard of Quarks (Copernicus Books, 2001).
M. J. G. Veltman, Facts and Mysteries in Elementary Particle Physics (World
Scientific, 2003).
The book by Gilmore is a fanciful tour through the world of particles written as a parody
of The Wizard of Oz.
A little more challenging, but still containing lots of general introductory material:
G. D. Coughlan, J. E. Dodd and B. M. Gripaios, The Ideas of Particle Physics, 3rd ed.
(Cambridge University Press, 2006).
D. Griffiths, Introduction to Elementary Particles, 2nd ed. (Wiley, 2008).
288
For histories of some discoveries in particle physics, see:
A. Pickering, Constructing Quarks (University of Chicago Press, 1984).
R. P. Crease and C. C. Mann, The Second Creation, (MacMillan, 1986).
A historical and lavishly illustrated introduction is:
F. Close, M. Marten, and C. Sutton, The Particle Odyssey, (Oxford University Press,
2002).
For speculations about unification by one of the developers of the electroweak theory,
see:
S. Weinberg, Dreams of a Final Theory (Pantheon, 1992).
Good sources of information about particle physics at a general level are the occasional
articles in the magazine Scientific American:
S. L. Glashow, “Quarks with Color and Flavor,” (October 1975); Y. Nambu, “The
Confinement of Quarks,” (November 1976); C. Quigg, “Elementary Particles and
Forces,” (April 1985); J. M. LoSecco, F. Reines, and D. Sinclair, “The Search for Proton
Decay,” (June 1985); G. Kane, “The Dawn of Physics Beyond the Standard Model,”
(June 2003); C. Quigg, “The Coming Revolutions in Particle Physics,” (February 2008).
Many articles on particle physics from Scientific American are collected in:
Particles and Forces: At the Heart of the Matter, edited by R. A. Carrigan, Jr. and W. P.
Trower (Freeman, 1990).
Materials for Active Engagement in the Classroom
A. Reading Quizzes
1. Which of the following particles is a composite (made up of other more fundamental
particles)?
(1) meson
(2) quark
(3) electron
(4) neutrino
2. Arrange the 4 basic forces in order of increasing values of the typical time over which
the force acts.
(1) electromagnetic, gravitational, weak, strong
(2) weak, strong, electromagnetic, gravitational
(3) gravitational, electromagnetic, weak, strong
(4) strong, electromagnetic, weak, gravitational
3. If a new particle with spin 3/2 were discovered, it would be a
(1) field particle
(2) lepton
(3) meson
Answers
1. 1
2. 4
3. 4
289
(4) baryon
B. Conceptual or Discussion Questions
1. Give the quark content of mesons with the following properties:
(a) charge = +1, charm = 0, strangeness = 0, topness = 0, bottomness = +1
(b) charge = 0, charm = 0, strangeness = 0, topness = 0, bottomness = +1
(c) charge = 0, charm = 0, strangeness = +1, topness = 0, bottomness = −1
(d) charge = −1, charm = −1, strangeness = 0, topness = 0, bottomness = −1
2. The two dimensional (strangeness vs. charge) chart of the spin-0 mesons (Figure
14.11) became 3-dimensional (Figure 14.17) when a new axis was added for charm.
Extend the 2 dimensional chart for the spin-3/2 baryons (Figure 14.16) to 3
dimensions by adding a charm axis and indicate the locations of all possible baryons
that can be constructed from u, d, s, and c quarks.
3. In the multiplet of 10 spin-3/2 baryons (Figures 14.13 and 14.16), each row differs
from the row below by replacing a u or d quark with an s quark. The average rest
energy of the baryons in each row should therefore differ from the average rest
energy of the next row by the difference in rest energy between the s quark and the u
or d quark. Find the average rest energy differences between the rows and compare
with the rest energy difference of the quarks.
4. The Ω− baryon decays through several processes in sequence, ultimately resulting in
only stable particles. After all decays have occurred, what are the remaining stable
particles?
5. The rest energy of the Ω− baryon (quark content sss) is 1672 MeV. Estimate the rest
energy you would expect for the charmed Ω (ssc), the bottom Ω (ssb), and the
charmed bottom Ω (scb). Find the measured values of the rest energies of these
particles (if known) and compare with your estimates.
Answers
1. (a) ub (b) db (c) b s (d) bc
3. 153 MeV, 148 MeV, 139 MeV; 170 MeV
4. p + 2e- + 2ν e (other paths might also include 2ν μ + 2ν μ )
5. 2672 MeV, 5872 MeV, 6872 MeV
Sample Exam Questions
A. Multiple Choice
1. In the reaction p + p → p + p + X (where p represents an antiproton), what might X
represent?
(a) Two protons
(b) Two mesons
(c) Two positrons (positive electrons)
(d) One proton
(e) One baryon with an electric charge of +2e
290
2. The decay Ω- → Λ0 + K- can be written in terms of quarks as sss → uds + su .
Which interaction is responsible for this decay?
(a) Strong
(b) Weak
(c) Electromagnetic
(d) Gravitational
3. Other than gravity, two protons can interact through which forces?
(a) only electromagnetic
(b) only electromagnetic and strong
(c) only electromagnetic and weak
(d) strong, electromagnetic, and weak
4. In the reaction p + p → p + n + X, the single particle represented by X could be a
(c) quark
(d) meson
(e) photon
(a) proton
(b) positron, e+
Answers
1. a
2. b
3. d
4. d
B. Conceptual
1. The Δ baryon decays into 2 particles. To which families do these 2 particles belong?
EXPLAIN YOUR ANSWER.
2. The D+ meson (quark content cd ), which is the least massive charmed meson, decays
with a lifetime of about 10−12 s. Some of its decay modes produce only 2 other
mesons, for example 2 π mesons or a π and a K. Would you expect to find a decay
mode for the D+ meson in which its direct decay products are only leptons or
antileptons? Either give an example of an allowed decay process and explain why it
is allowed, or else explain why the decay process would not be allowed.
3. The Ω− baryon (strangeness = −3) decays through a series of processes that eventually
lead to a nucleon (proton or neutron). What is the minimum number of decay
processes necessary for the Ω− to transform into p or n? EXPLAIN YOUR
ANSWER.
Answers
1. Baryon + meson (baryon + photon would be acceptable)
2. D + → μ + + ν μ , because the lifetime (and the change in charm) indicate
a decay by the weak interaction.
3. Two (first a strangeness-changing weak decay including the emission
of a strange meson, followed by another strangeness-changing weak
decay. (Full credit for a well-explained answer arguing for a series of 3
weak decays each changing S by 1.)
C. Problems
1. An unknown particle X moving in the x direction decays into a proton and a π−.
(a) To what family does X belong? Explain your answer.
291
(b) From the length of the track left by X, it is concluded that the decay lifetime is in
the range of 10−10 s. What does this imply about the interaction that is responsible for
this decay, and what can you conclude about the properties of particle X?
(c) You observe the proton to move with momentum 360 MeV/c at 14° above the x
axis and the pion to move with momentum 155 MeV/c at 34° below the x axis. Find
the momentum and energy of particle X. The proton rest energy is 938 MeV and the
pion rest energy is 140 MeV.
(d) What is the rest energy of particle X?
2. (a) What is the minimum kinetic energy necessary to produce the reaction
π 0 + p → p + p + p with π0 incident on protons at rest? (Rest energies are
mπ c 2 = 135 MeV, mpc 2 = 938 MeV .)
(b) Find the kinetic energy of each of the final particles if the pions are incident at the
threshold energy.
Answers
1. (a) baryon (b) weak interaction; a conservation law (such as strangeness)
may be violated in the decay (c) 478 MeV/c, 1214 MeV (d) 1116 MeV
2. (a) 3607 MeV (b) 622 MeV
292
Problem Solutions
1. (a) Strong, because of the lifetime.
(c) Weak, because of the leptons.
(e) Strong, because of the lifetime.
(b) Electromagnetic, because of the photons.
(d) Weak, because of the lifetime.
(f) Weak, because of the lifetime.
2. We can estimate the range Δx using the uncertainty principle in the form of ΔE Δt ∼ ,
with ΔE = mc 2 and Δt = Δx / c :
Δx ∼
c
197 MeV ⋅ fm
=
= 2.46 × 10−3 fm
2
3
mc
80.2 × 10 MeV
(b) ρ − → π − + π 0
3. (a) π − → μ − +ν μ
(c) D − → K + + π − + π −
(d) K 0 → π − + π +
4. (a) n → p + e + + ν e
(b) Λ 0 = p + π +
(c) Ω − → Λ 0 + K +
(d) Σ 0 → Λ 0 + γ
5. (a) K 0 → π − + e + +ν e
(c) K 0 → π − + μ + + ν μ
(b) K 0 → π + + e − +ν e
(d) K 0 → π + + μ − + ν μ
6. (a) Lepton number (Le = 0 → Le = −1)
(b) Energy ( mΛ c 2 < mp c 2 + mK c 2 )
(c) Strangeness (S = −3 → S = −1; only ΔS = ±1 or 0 is allowed for the weak interaction)
(d) Baryon number (B = 1 → B = 0)
(e) Strangeness (S = −1 → S = 0; only ΔS = 0 is allowed for electromagnetic decays)
(f) Energy ( mΩ c 2 < mΞ c 2 + mK c 2 )
(g) Energy ( mΞ c 2 < mΣ c 2 + mπ c 2 )
(h) Electron and muon lepton numbers (Le = 0 → Le = 1 and Lμ = 1 → Lμ = 0)
7. (a) Electron lepton number (Le = +1 → Le = −1)
(b) Strangeness (S = 0 → S = −1)
(c) Baryon number (B = 2 → B = 3)
(d) Strangeness (S = 0 → S = −2)
(e) Baryon number (B = 1 → B = 2)
8. (a) νe
9. (a) K+
(b) π0
(b) n
(c) K0
(c) π0
(d) π−
(e) μ+
293
(f) Ξ−
10.
(a)
px = p1x + p2 x = (528 MeV/c) cos 30° + (2166 MeV/c) cos 7° = 2607 MeV/c
p y = p1 y + p2 y = (528 MeV/c) sin 30° − (2166 MeV/c) sin 7° = 0
E1 = c 2 p12 + mπ2 c 4 = (528 MeV) 2 + (140 MeV) 2 = 546 MeV
E2 = c 2 p22 + mπ2 c 4 = (2166 MeV) 2 + (140 MeV) 2 = 2171 MeV
mc 2 = ( E1 + E2 ) 2 − c 2 p 2 = (546 MeV + 2171 MeV)2 − (2607 MeV) 2 = 764 MeV
(b)
px = p1x + p2 x = (645 MeV/c) cos 20° + (4223 MeV/c) cos 3° = 4823 MeV/c
p y = p1 y + p2 y = (645 MeV/c) sin 20° − (4223 MeV/c) sin 3° = 0
E1 = c 2 p12 + mπ2 c 4 = (645 MeV) 2 + (140 MeV) 2 = 660 MeV
E2 = c 2 p22 + mπ2 c 4 = (4223 MeV) 2 + (140 MeV)2 = 4225 MeV
mc 2 = ( E1 + E2 ) 2 − c 2 p 2 = (660 MeV + 4225 MeV) 2 − (4823 MeV) 2 = 775 MeV
(c)
px = p1x + p2 x = (119 MeV/c) cos 45° + (962 MeV/c) cos 5° = 1042 MeV/c
p y = p1 y + p2 y = (119 MeV/c) sin 45° − (962 MeV/c) sin 5° = 0
E1 = c 2 p12 + mπ2 c 4 = (119 MeV) 2 + (140 MeV) 2 = 183 MeV
E2 = c 2 p22 + mπ2 c 4 = (962 MeV) 2 + (140 MeV)2 = 972 MeV
mc 2 = ( E1 + E2 ) 2 − c 2 p 2 = (183 MeV + 972 MeV)2 − (1042 MeV) 2 = 498 MeV
11.
(a) ΔE =
(b) ΔE =
(c) ΔE =
(d) ΔE =
12.
Δt
Δt
Δt
Δt
=
=
=
=
τ
τ
τ
τ
6.58 ×10−16 eV ⋅ s
=
= 1.29 keV
5.1× 10−19 s
6.58 × 10−16 eV ⋅ s
=
= 0.21 MeV
3.2 × 10−21 s
6.58 ×10−16 eV ⋅ s
=
= 8.9 keV
7.4 × 10−20 s
6.58 ×10−16 eV ⋅ s
=
= 118 MeV
5.6 × 10−24 s
For Σ − the proper lifetime is τ 0 = 1.5 × 10−10 s .
E = K + mc 2 = 3642 MeV + 1197 MeV = 4839 MeV =
2
mc 2
1 − v2 / c2
2
⎛ mc 2 ⎞
v
⎛ 1197 MeV ⎞
= 1− ⎜
⎟ = 1− ⎜
⎟ = 0.9689
c
⎝ 4839 MeV ⎠
⎝ E ⎠
τ=
τ0
1− v / c
2
2
=
1.5 × 10−10 s
1 − (0.9689)
2
= 6.07 × 10−10 s
D = vτ = (0.9689)(3.00 × 108 m/s)(6.07 × 10−10 s) = 0.18 m
294
13.
With Kπ = 0 , and assuming mν to be negligibly small,
Q = K e + Eν = ( pe c) 2 + (me c 2 ) 2 − me c 2 − pν c
Momentum conservation gives pe = pν , so
Q + me c 2 − pe c = ( pe c) 2 + (me c 2 ) 2
Q 2 + (me c 2 ) 2 + ( pe c) 2 + 2Qme c 2 − 2Qpe c − 2me pe c 3 = ( pe c) 2 + (me c 2 ) 2
cpe =
Q 2 + 2Qme c 2 (358.2 MeV) 2 + 2(358.2 MeV)(0.511 MeV)
=
= 179.4 MeV
2Q + 2me c 2
2(358.2 MeV) + 2(0.511 MeV)
Ee = ( pe c) 2 + (me c 2 ) 2 = (179.4 MeV) 2 + (0.511 MeV) 2 = 179.4 MeV
14. (a)
(b)
(c)
15. (a)
16.
Q = mi c 2 − mf c 2 = mπ c 2 = 135 MeV
Q = mi c 2 − mf c 2 = mΣ c 2 − mp c 2 − mπ c 2
= 1189 MeV − 938 MeV − 135 MeV = 116 MeV
Q = mi c 2 − mf c 2 = mD c 2 − mK c 2 − 2mπ c 2
= 1869 MeV − 494 MeV − 2(140 MeV) = 1095 MeV
Q = mi c 2 − mf c 2 = mπ c 2 − mμ c 2 − mν c 2 = 140 MeV − 105.7 MeV = 34 MeV
(b)
Q = mi c 2 − mf c 2 = mK c 2 − 2mπ c 2 = 498 MeV − 2(140 MeV) = 218 MeV
(c)
Q = mi c 2 − mf c 2 = mΣ c 2 − mΛ c 2 = 1192 MeV − 1116 MeV = 76 MeV
(a)
Momentum conservation: pπ + = pπ − so Eπ + = Eπ −
Energy conservation: EK = Eπ + + Eπ −
Eπ + = Eπ − = 12 EK = 12 (498 MeV) = 249 MeV
Kπ + = Kπ − = Eπ + − mπ c 2 = 249 MeV − 140 MeV = 109 MeV
(b)
Momentum conservation: pn = pπ
Energy conservation: En + Eπ = ( pn c) 2 + (mn c 2 ) 2 + ( pπ c) 2 + (mπ c 2 ) 2 = EΣ
( pπ c) 2 + (mn c 2 ) 2 = EΣ − ( pπ c) 2 + (mπ c 2 ) 2 = mΣ c 2 − ( pπ c) 2 + (mπ c 2 ) 2
( pπ c) 2 + (mn c 2 ) 2 = (mΣ c 2 ) 2 + ( pπ c) 2 + (mπ c 2 ) 2 − 2mΣ c 2 ( pπ c) 2 + (mπ c 2 ) 2
295
(mΣ c 2 ) + (mπ c 2 ) 2 − (mn c 2 ) 2
Eπ = ( pπ c) + (mπ c ) =
2mΣ c 2
(1197 MeV) 2 + (140 MeV) 2 − (940 MeV) 2
=
= 221 MeV
2(1197 MeV)
2
2 2
Kπ = Eπ − mπ c 2 = 221 MeV − 140 MeV = 81 MeV
En = EΣ − Eπ = 1197 MeV − 221 MeV = 976 MeV
K n = En − mn c 2 = 976 MeV − 940 MeV = 36 MeV
17.
(a)
Momentum conservation: pΛ = pK
Energy conservation: EΛ + EK = ( pΛ c) 2 + (mΛ c 2 ) 2 + ( pK c) 2 + (mK c 2 ) 2 = EΩ
( pK c) 2 + (mΛ c 2 ) 2 = EΩ − ( pK c) 2 + ( mK c 2 ) 2 = mΩ c 2 − ( pK c) 2 + (mK c 2 ) 2
( pK c) 2 + (mΛ c 2 ) 2 = (mΩ c 2 ) 2 + ( pK c) 2 + (mK c 2 ) 2 − 2mΩ c 2 ( pK c) 2 + (mK c 2 ) 2
(mΩ c 2 ) + (mK c 2 ) 2 − (mΛ c 2 ) 2
EK = ( pK c) + (mK c ) =
2mΩ c 2
(1672 MeV)2 + (494 MeV) 2 − (1116 MeV) 2
=
= 537 MeV
2(1672 MeV)
2
2 2
K K = EK − mK c 2 = 537 MeV − 494 MeV = 43 MeV
EΛ = EΩ − EK = 1672 MeV − 537 MeV = 1135 MeV
K Λ = EΛ − mΛ c 2 = 1135 MeV − 1116 MeV = 19 MeV
(b)
Momentum conservation: pμ = pν
Energy conservation: Eμ + Eν = ( pμ c) 2 + (mμ c 2 ) 2 + pν c = Eπ = mπ c 2
where we assume the ν has a negligible mass. Then
( pν c) 2 + (mμ c 2 ) 2 = (mπ c 2 − pν c) 2 = (mπ c 2 ) 2 − 2mπ pν c 3 + ( pν c) 2
Eν = pν c =
(mπ c 2 ) 2 − (mμ c 2 ) 2
2mπ c 2
=
(140 MeV) 2 − (105.7 MeV) 2
= 30 MeV
2(140 MeV)
Eμ = Eπ − Eν = 140 MeV − 30 MeV = 110 MeV
K μ = Eμ − mμ c 2 = 110 MeV − 106 MeV = 4 MeV
296
18.
EΣ = K Σ + mΣ c 2 = 250 MeV + 1197 MeV = 1447 MeV
cpΣ = EΣ2 − (mΣ c 2 ) 2 = (1447 MeV)2 − (1197 MeV) 2 = 813 MeV
Let the neutron move at an angle θ with the positive x axis, which is the original direction
of motion of the Σ. Then conservation of momentum gives:
x direction: pΣ = pn cos θ
y direction: 0 = pn sin θ − pπ or pπ = pn sin θ
which combine to give pΣ2 + pπ2 = pn2 . Conservation of energy gives
EΣ = En + Eπ = (cpn ) 2 + (mn c 2 ) 2 + (cpπ ) 2 + (mπ c 2 ) 2
(cpπ ) 2 + (mπ c 2 ) 2 = EΣ2 − 2 EΣ (cpn ) 2 + ( mn c 2 ) 2 + (cpn ) 2 + (mn c 2 ) 2
(mn c 2 ) 2 + EΣ2 − (mπ c 2 ) 2 + (cpn ) 2 − (cpπ ) 2
2 EΣ
2 2
2
2 2
2
(m c ) + EΣ − (mπ c ) + (cpK )
= n
2 EΣ
2
(940 MeV) + (1447 MeV) 2 − (140 MeV) 2 + (813 MeV) 2
=
= 1250 MeV
2(1447 MeV)
En = (cpn ) 2 + (mn c 2 ) 2 =
K n = En − mn c 2 = 1250 MeV − 940 MeV = 310 MeV
Eπ = EΣ − En = 1447 MeV − 1250 MeV = 197 MeV
Kπ = Eπ − mπ c 2 = 197 MeV − 140 MeV = 57 MeV
cpn = En2 − (mn c 2 ) 2 = (1250 MeV) 2 − (940 MeV) 2 = 824 MeV
θ = cos −1
19.
pΣ
813 MeV/c
= cos −1
= 9.4°
824 MeV/c
pn
Let θ be the angles that the directions of the two outgoing pi mesons make above and
below the x axis (which represents the direction of the original K meson). We’ll use p+
and p− to represent the momenta of the pions and E+ and E− for their energies. Then
conservation of momentum gives:
x direction: pK = p+ cos θ + p− cos θ
y direction: 0 = p+ sin θ − p− sin θ
From the y equation, we get immediately p+ = p− , which in turn gives E+ = E− . The
total energy of the K meson is EK = K K + mK c 2 = 276 MeV + 498 MeV = 774 MeV .
Conservation of energy then gives:
EK = E+ + E−
so
E+ = E− = 12 EK = 12 (774 MeV) = 387 MeV
297
cpK = EK2 − (mK c 2 ) 2 = (774 MeV) 2 − (498 MeV) 2 = 592.5 MeV
cp+ = E+2 − (mπ c 2 ) 2 = (387 MeV)2 − (140 MeV) 2 = 360.8 MeV
From the x component momentum equation with p+ = p− we get pK = 2 p+ cos θ , so
θ = cos −1
20.
pK
592.5 MeV
= cos −1
= 34.9°
2 p+
2(360.8 MeV)
In the nonrelativistic limit, all kinetic energies are very small compared with rest
energies, so that the total rest energy in the reaction does not change:
m1 + m2 ≅ m3 + m4 + m5 +
The threshold kinetic energy is then
K th = −Q
21.
m1 + m2 + m3 + m4 + m5 +
2m2
= −Q
⎛ m ⎞
2(m1 + m2 )
= −Q ⎜ 1 + 1 ⎟
2m2
⎝ m2 ⎠
(a)
Q = mi c 2 − mf c 2 = mK c 2 + mp c 2 − mΛ c 2 − mπ c 2
(b)
= 494 MeV + 938 MeV − 1116 MeV − 135 MeV = 181 MeV
Q = mi c 2 − mf c 2 = mπ c 2 + mp c 2 − mΣ c 2 − mK c 2
(c)
= 140 MeV + 938 MeV − 1189 MeV − 494 MeV = −605 MeV
Q = mi c 2 − mf c 2 = mp c 2 + mp c 2 − mp c 2 − mπ c 2 − mΛ c 2 − mK c 2
= 938 MeV − 140 MeV − 1116 MeV − 498 MeV = −816 MeV
22.
(a)
(b)
(c)
Q = mi c 2 − mf c 2 = mn c 2 − mπ c 2 − mp c 2
= 940 MeV − 140 MeV − 938 MeV = −138 MeV
Q = mi c − mf c 2 = mK c 2 + mp c 2 − mΩ c 2 − mK + c 2 − mK0 c 2
= 494 MeV + 938 MeV − 1672 MeV − 494 MeV − 498 MeV = −1232 MeV
Q = mi c 2 − mf c 2 = mp c 2 + mp c 2 − mp c 2 − mΣ c 2 − mK c 2
2
= 938 MeV − 1189 MeV − 498 MeV = −749 MeV
23.
(a)
Q = mi c 2 − mf c 2 = mp c 2 + mp c 2 − mn c 2 − mΣ c 2 − mK c 2 − mπ c 2
= 2(938 MeV) − 940 MeV − 1189 MeV − 498 MeV − 140 MeV = −891 MeV
298
K th = −Q
2mp + mn + mΣ + mK + mπ
2mp
2(938 MeV) + 940 MeV + 1189 MeV + 498 MeV + 140 MeV
= (891 MeV)
2(938 MeV)
= 2205 MeV
24.
(b)
Q = mi c 2 − mf c 2 = mπ c 2 + mp c 2 − mΣ c 2 − mK c 2
= 140 MeV + 938 MeV − 1192 MeV − 498 MeV = −612 MeV
m + mn + mΣ + mK
K th = −Q π
2mp
140 MeV + 938 MeV + 1189 MeV + 498 MeV
= (612 MeV)
= 903 MeV
2(938 MeV)
(a)
Q = mi c 2 − mf c 2 = mp c 2 + mn c 2 − mp c 2 − mΣ c 2 − mK c 2
K th = −Q
= 940 MeV − 1197 MeV − 494 MeV = −751 MeV
mp + mn + mp + mΣ + mK
2mn
2(938 MeV) + 940 MeV + 1197 MeV + 494 MeV
= (751 MeV)
= 1800 MeV
2(940 MeV)
(b)
Q = mi c 2 − mf c 2 = mπ c 2 + mp c 2 − mp c 2 − mp c 2 − mn c 2
K th = −Q
= 140 MeV − 938 MeV − 940 MeV = −1738 MeV
mπ + 3mp + mn
2mp
140 MeV + 3(938 MeV) + 940 MeV
= (1738 MeV)
= 3608 MeV
2(938 MeV)
25.
(a)
K− + p → Ω− + K+ + K0
su + uud → sss + u s + d s
u+u → s+ s+s+ s
The fundamental processes are annihilation of the uu pair followed by the
creation of two ss pairs.
(b)
π+ + p → Σ+ + K+
ud + uud → uus + us
d + d → s + s
The fundamental processes are annihilation of the dd pair followed by creation of
the ss pair.
(c)
γ + n → π− + p
γ + udd → du + uud
γ → u + u
299
The incident photon creates a uu pair.
26. (a)
K− + p → Λ0 + π0
su + uud → usd + uu
The quarks are merely rearranged among the particles; no quarks are created or
destroyed.
(b)
p + p → p + π+ + Λ0 + K0
uud + uud → uud + ud + usd + ds
energy → d + d + s + s
The incident proton energy creates dd and uu pairs.
(c)
γ + p → D + + D0 + n
γ + uud → cd + uc + udd
γ → c+c+d+d
The incident photon creates cc and dd pairs.
27. (a)
(b)
Ω− → Λ0 + K−
sss → usd + su
s → u+d+u
The weak interaction processes are s → u + W − followed by W − → d + u .
n →
p + e− + ν e
udd → uud + e − + ν e
d → u + e− + ν e
The weak interaction process is d → u + W − followed by W − → e − + ν e .
(c)
π0 → γ + γ
uu → γ + γ
Photons are created from the annihilation of the uu pair.
(d)
28. (a)
(b)
D+ → K− + π+ + π+
cd → su + ud + ud
c → s+u+d+u+u
The weak interaction processes are c → s + W + followed by W + → u + d and
creation of a uu pair.
K0 → π+ + π−
ds → ud + du
s → d+u+u
The weak interaction processes are s → u + W + followed by W + → u + d .
Δ*++ → p + π+
uuu → uud + ud
300
energy → d + d
The dd pair is created from the decay energy.
29.
30.
(c)
Σ− → n + π−
dds → udd + du
s → u+d+u
The weak interaction processes are s → u + W − followed by W − → d + u .
(d)
D0 → K + + π −
uc → us + du
c → s+d+u
The weak interaction processes are c → s + W − followed by W − → d + u .
D0 - cu
D + - cd
Ds+ - cs
D0 - uc
D − - dc
Ds− - sc
K + → e+ +ν e
K+ → π + + π − + π +
31.
K + → π 0 + μ + +ν μ
K+ → π + + π 0
K + → π 0 + e+ +ν e
K+ → π + + π 0 + π 0
The mean lifetime in the laboratory τ is related to the halflife in the laboratory as
τ = t1/ 2 / ln 2 . The beam must travel a distance d = 2.0 m at speed v within one halflife, so
t1/ 2 = d / v . Starting with the time dilation formula for the particle/s mean lifetime τ0 we
have
t
τ0
d /v
τ=
= 1/ 2 =
2
2
ln 2 ln 2
1− v / c
Solving for v/c,
v
1
=
= 0.999635
c
1 + (cτ 0 ln 2 / d ) 2
E=
mc 2
1− v / c
2
2
=
1116 MeV
1 − (0.999635) 2
= 41.3 GeV
K = E − mc 2 = 41.3 GeV − 1.116 GeV = 40.2 GeV
32.
(a) Ω − → Ξ − + π 0
(b) Λ 0 → n + π 0
or
(c) Σ + → Λ 0 + e + +ν e
33.
Ξ0 + π −
or
p + e− +ν e
or
n +π +
(a) The two protons have velocities of equal magnitude and thus equal kinetic energies.
Conservation of energy then gives
301
mp c 2 + K p + mp c 2 + K p = mp c 2 + mp c 2 + mπ c 2
so K p = 12 mπ c 2 and Ep = K p + mp c 2 = 12 (135 MeV) + 938.3 MeV = 1005.8 MeV . With
E = mc 2 / 1 − v 2 / c 2 we get
v = c 1 − (mc 2 / E ) 2 = c 1 − (938.3 MeV/1005.8 MeV) 2 = 0.360c
(b) In this frame of reference the protons are moving with velocities +v and −v. If we
move at a transformation velocity −v, then the proton that was originally moving at
velocity −v will appear at rest, and the velocity of the proton originally moving at +v can
be found from the Lorentz velocity transformation:
v′ =
v−u
v + ( −v)
2v
2(0.360c)
=
=
=
= 0.637c
2
2
2
2
1 − vu / c 1 − v(−v) / c 1 + v / c 1 + (0.360) 2
(c) K = E − mc 2 =
34.
mc 2
1 − v2 / c2
− mc 2 =
938.3 MeV
1 − (0.637) 2
(a) Weak interaction.
Ds+ → φ + π +
(b)
Ds+ → μ + + ν μ
C: +1 → 0 + 0
S: +1 → 0 + 0
Ds+ → φ + π +
(c)
C: +1 → 0 + 0
S: +1 → 0 + 0
Ds+ → μ + + ν μ
cs → ss + ud
c → s + W + and
W+ → u + d
cs → leptons
c + s → W + and
W + → μ + +ν μ
− 938.3 MeV = 279 MeV
Ds+ → K + + K 0
C: +1 → 0 + 0
S: +1 → +1 + (−1)
Ds+ → K + + K 0
cs → us + sd
c → s + W + and
W+ → u + d
(d) The weak interaction cannot change S by 2 units.
35.
One of the pions will have its maximum kinetic energy when the other 2 pions move in
the opposite direction with equal momenta. In this way they have the least possible
energy necessary for momentum conservation. To conserve momentum, if one pion has
momentum p, then the other 2 pions each move in the opposite direction with momentum
p/2. Conservation of energy then gives
EK = Eπ 1 + Eπ 2 + Eπ 3 = (cp) 2 + (mπ c 2 ) 2 + 2 (cp / 2) 2 + (mπ c 2 ) 2
(mK c 2 ) 2 − 2mK c 2 (cp ) 2 + (mπ c 2 ) 2 + (cp ) 2 + (mπ c 2 ) 2 = 4[(c 2 p 2 / 4 + (mπ c 2 ) 2 ]
302
(mK c 2 ) 2 − 3(mπ c 2 ) 2 (494 MeV) 2 − 3(140 MeV)2
Eπ 1 = (cp ) + (mπ c ) =
=
= 187 MeV
2mK c 2
2(494 MeV)
2
2 2
Kπ 1 = Eπ 1 − mπ c 2 = 187 MeV − 140 MeV = 47 MeV
36. (a) The initial momentum of the pion is
pπ =
mv
1 − v2 / c2
=
1 (mc 2 )(v / c) 1 (139.6 MeV)(0.998)
=
= 2204 MeV/c
c 1 − v2 / c2 c
1 − (0.998) 2
and the momentum components of the K meson are
pKx = pK cos θ K = (1560 MeV/c) cos 20.6° = 1460 MeV/c
pKy = pK sin θ K = (1560 MeV/c) sin 20.6° = 549 MeV/c
so that the momentum components of the unknown particle are
px = pπ − pKx = 2204 MeV/c − 1460 MeV/c = 744 MeV/c
p y = pKy = 549 MeV/c
and its momentum and direction are thus
p=
px2 + p y2 = (744 MeV/c)2 + (549 MeV/c) 2 = 925 MeV/c
p
549 MeV/c
θ = tan −1 y = tan −1
= 36.4°
px
744 MeV/c
(b) The initial energy and the final energy of the K meson are
Einitial = Eπ + Ep =
mπ c 2
1− v / c
2
2
+ mp c 2 =
139.6 MeV
1-(0.998) 2
+ 938.3 MeV = 3147 MeV
EK = (cpK ) 2 + (mK c 2 ) 2 = (1560 MeV) 2 + (498 MeV) 2 = 1638 MeV
and so the energy of the second outgoing particle is
E = Einitial − EK = 3147 MeV − 1638 MeV = 1509 MeV
(c) The rest energy of the second outgoing particle is
mc 2 = E 2 − (cp ) 2 = (1509 MeV) 2 − (925 MeV) 2 = 1192 MeV
303
Because the reaction started with one baryon, this particle must also be a baryon, and a
look at Table 14.6 shows that it must be a Σ0. This would be expected based also on the
conservation of electric charge and strangeness.
304
Chapter 15
Supplemental Materials
Suggestions for Additional Reading
There are many introductory, advanced, and popular-level books and articles that cover
in more detail the subjects touched only briefly in this chapter. To pursue any of these
subjects, you may first need some background material on astronomy and astrophysics:
B. W. Carroll and D. A. Ostlie, An Introduction to Modern Astrophysics, 2nd ed.
(Benjamin Cummmings, 2006).
S. A. Gregory and M. Zeilik, Introductory Astronomy and Astrophysics, 4th ed.
(Saunders, 1997).
M. Harwit, Astrophysical Concepts, 4th ed. (Springer, 2006).
Some nonmathematical introductory books on general relativity and cosmology are:
T. Ferris, The Red Limit (Wm. Morrow & Co., 1977).
S. W. Hawking, A Brief History of Time (Bantam, 1988).
L. Krauss, Quintessence: The Mystery of Missing Mass in the Universe (Basic Books,
2000).
K. Larsen, Cosmology 101 (Greenwood Press, 2007).
A. Lightman, Ancient Light (Harvard University Press, 1991).
S. Weinberg, The First Three Minutes (Basic Books, 1977).
Some additional detail on general relativity, without the advanced math:
P. G. Bergmann, The Riddle of Gravitation (Scribner’s, 1968).
M. Berry, Principles of Cosmology and Gravitation (Cambridge University Press, 1976).
P. C. W. Davies, Space and Time in the Modern Universe (Cambridge University Press,
1977).
W. Rindler, Essential Relativity (Van Nostrand, 1969).
R. M. Wald, Space, Time, and Gravity, 2nd ed. (University of Chicago Press, 1992).
Books on cosmology which include mostly calculus-level math (no tensors):
A. Liddle, An Introduction to Modern Cosmology, 2nd ed. (Wiley, 2003).
P. J. E. Peebles, Principles of Physical Cosmology (Princeton University Press, 1993).
305
M. Rowan-Robinson, Cosmology, 3rd ed. (Clarendon Press, 1996).
D. W. Sciama, Modern Cosmology (Cambridge University Press, 1971).
E. R. Harrison, Cosmology, 2nd ed. (Cambridge University Press, 2000).
A more challenging work, but still very readable and containing much information on
observations:
J. V. Narlikar, Introduction to Cosmology, 3rd ed. (Cambridge University Press, 2002).
As with many of the subjects covered in this book, a good source for current, popularlevel articles is the magazine Scientific American:
S. W. Hawking, “The Quantum Mechanics of Black Holes,” Scientific American 236, 34
(January 1977).
M. J. Rees, “Black Holes in Galactic Centers,” Scientific American 263, 56 (November
1990).
W. L. Freedman, “The Expansion Rate and Size of the Universe,” Scientific American
267, 54 (November 1992).
D. E. Osterbrock, J. A. Gwinn, and R. S. Brashear, “Edwin Hubble and the Expanding
Universe,” Scientific American 269, 84 (July 1993).
C. H. Lineweaver and T. M. Davis, “Misconceptions About the Big Bang,” Scientific
American 292, 36 (March 2005).
L. M. Krauss and R. J. Scherrer, “The End of Cosmology?”, Scientific American 298, 46
(March 2008).
Materials for Active Engagement in the Classroom
A. Reading Quizzes
Answers
B. Conceptual or Discussion Questions
Answers
Sample Exam Questions
A. Multiple Choice
306
Answers
B. Conceptual
Answers
C. Problems
Answers
307
Problem Solutions
1. (a)
d = 1.0 × 106 light-years = 0.307 Mpc
v = Hd = (72 km/s/Mpc)(0.307 Mpc) = 22.1 km/s = 7.37 × 10−5 c
λ′ = λ
(b)
1+ v / c
1 + 7.67 × 10−5
= (590.0 nm)
= 590.0 nm
1− v / c
1 − 7.67 ×10−5
d = 1.0 × 109 light-years = 307 Mpc
v = Hd = (72 km/s/Mpc)(307 Mpc) = 22,100 km/s = 7.37 × 10−2 c
λ′ = λ
1+ v / c
1 + 7.67 × 10−2
= (590.0 nm)
= 637.1 nm
1− v / c
1 − 7.67 ×10−2
2. With λ ′ / λ = 2 , Equation 15.1 gives
λ′
1+ v / c
=2=
1− v / c
λ
v / c = 0.60
which gives
and from Hubble’s law
d=
3. (a)
v
(0.60)(3.00 × 105 km/s)
=
= 2.5 × 103 Mpc = 8.15 × 103 light-years
H0
72 km/s/Mpc
⎞ 24π E 2
du
d ⎛ 8π E 3
1
1
8π E 3 e E / kT (1/ kT )
=
=
−
=0
⎜
⎟
dE dE ⎝ (hc)3 e E / kT − 1 ⎠ ( hc)3 e E / kT − 1 ( hc)3 (e E / kT − 1) 2
3−
E e E / kT
=0
kT e E / kT − 1
e− x = 1 −
or
x
3
with
x = E / kT
This equation must be solved numerically. Note that a good starting guess is x = 3. The
numerical solution gives x = 2.841 and so
E = 2.821kT = (2.431×10−4 eV/K)T
(b)
E = (2.431×10−4 eV/K)(2.73 K) = 6.64 × 10−4 eV
4. From Equation 15.7 we have
308
N 8π k 3
8π (8.617 × 10−5 eV/K)3 (2.404) 3
3
T
T = (2.03 × 107 photons/m3 ⋅ K 3 )T 3
=
(2.404)
=
3
3
9
3
V (hc)
(1240 eV ⋅ nm) (1 m/10 nm)
Equation 10.41 gives
U=
8π 5 k 4 4
8π 5 (8.617 × 10−5 eV/K) 4
T
T 4 = (4.72 × 103 eV/m3 ⋅ K 4 )T 4
=
3
3
9
3
15(hc)
15(1240 eV ⋅ nm) (1 m/10 nm)
5. The tangential rotational speed of the Sun in our galaxy is 220 km/s. From Equation 15.1
we can find the Doppler shift when v << c, for λ ′ = λ + Δλ :
⎛
⎝
v⎞
λ + Δλ ≅ λ ⎜1 + ⎟
c
⎠
so
Δλ = λ
v
220 km/s
= (121.5 nm)
= 0.089 nm
c
3.00 × 105 km/s
6. (a) The tangential speed at the Sun’s equator is
v = Rω = (6.96 × 108 m)
2π
= 1950 m/s
(26 d)(86400 s/d)
For such a small speed, we can approximate the Doppler shift (see Equation 15.1) as
Δλ ≅ λ
v
1950 m/s
= (121.5 nm)
= 0.790 pm
c
3.00 ×108 m/s
This is about 3 times larger than the gravitational shift.
(b) The width of the spectral line, due to the thermal Doppler broadening, can be found
from Equation 10.30, with T = 6000 K (the surface temperature of the Sun) and thus
kT = (8.617 × 10−5 eV/K)(6000 K) = 0.517 eV :
Δλ = 2λ (2 ln 2)kT / mc 2 = 2(121.5 nm) (2 ln 2)(0.517 eV)/(939 MeV) = 6.7 pm
It is difficult to measure the small gravitational effect for this relatively broad spectral
line.
7.
gH
(9.8 m/s 2 )(150 ×103 m)
9
Δf = f 2 = (10 Hz)
= 1.6 ×10−2 Hz
8
2
c
(3.00 × 10 m/s)
8.
ΔE = h Δf = h(2.5 × 10−15 f ) = 2.5 × 10−15 E
309
Δt =
ΔE
FCoulomb =
9.
=
6.58 ×10−16 eV ⋅ s
= 1.8 × 10−5 s
3
−15
(2.5 × 10 )(14.4 × 10 eV)
e 2 zZ
4πε 0 r 2
and
Fgrav =
GmM
r2
so we can change expressions based on the Coulomb force into those based on the
gravitational force by replacing zZe 2 / 4πε 0 with GmM. Equation 6.8 then becomes
b=
zZ
e2
cot 12 θ
2
1
4
πε
2 ( 2 mv )
0
→
b=
For a photon that just grazes the Sun, b = R and v = c, so R =
GmM
cot 12 θ
mv 2
GM
cot 12 θ and, assuming θ
c2
is a small angle,
GM
= tan 12 θ ≅ 12 θ
2
Rc
10.
so
θ≅
2GM
Rc 2
The orbital period is 7.75 h, so with (24)(365.25) = 8766 hours per year that works out to
1131 orbits per year or 113,100 orbits per century. The mass of each star is about 1.4
solar masses, so the total mass M is (2.8)(2.0 × 1030 kg) = 5.6 × 1030 kg. The eccentricity
is 0.617, and the periastron distance rmin is 746,600 km. From Equation 15.25 we then
have
Δφ =
6π GM
6π (6.67 ×10−11 N ⋅ m 2 / kg 2 )(5.6 × 1030 kg)
=
= 6.45 ×10−5 rad
c 2 rmin (1 + e)
(3 × 108 m/s) 2 (7.5 × 108 m)(1.617)
Thus
N Δφ = (113,100)(6.45 ×10−5 rad)(57.3deg/ rad)(3600 arc sec/deg)
= 1.5 × 106 arc seconds per century
11.
(a) If the star originally contains N nucleons (protons and neutrons), then in comparison
with the Sun we have N = N ( M / M ) . Also, N = M / mn = 1.188 × 1057 . Equation
10.58 is then
310
h 2 (9 / 32π 2 ) 2 / 3
h 2 (9 / 32π 2 ) 2 / 3
R=
=
GN 1/ 3mn3
GN 1/ 3 ( M / M )1/ 3 mn3
⎛ M ⎞
(6.626 × 10−34 J ⋅ s) 2 (9 / 32π 2 ) 2 / 3
=
⎟
−11
−27
2
2
57 1/ 3
3 ⎜
(6.673 ×10 N ⋅ m /kg )(1.188 ×10 ) (1.675 × 10 kg) ⎝ M ⎠
⎛ M ⎞
= (12.3 km) ⎜
⎟
⎝M ⎠
−1/ 3
−1/ 3
(b) The radius of the neutron star is R = (12.3 km)(1.5)−1/3 = 11 km. The angular
momentum L = I ω is conserved during the collapse, so I iωi = I f ωf :
2
2
2
⎛ Ri ⎞
⎛ 7 ×105 km ⎞
MRi2
I
9
ωf = ωi i = ωi 52
ω
(1
rev/y)
=
=
⎟
⎜
⎟ = 4.0 ×10 rev/y = 128 rev/s
i⎜
2
If
⎝ 11 km ⎠
⎝ Rf ⎠
5 MRf
12.
(a) For the matter-dominated universe, R = At 2 / 3 , so dR / dt = 23 At −1/ 3 and
d 2 R / dt 2 = − 92 At −4 / 3 . The deceleration parameter is
( At 2 / 3 ) ( − 92 At −4 / 3 )
R(d 2 R / dt 2 )
q=−
=−
= 0.5
2
(dR / dt ) 2
( 2 At −1/ 3 )
3
For the radiation-dominated universe, R = A′t1/ 2 , so dR / dt = 12 A′t −1/ 2 and
d 2 R / dt 2 = − 14 A′t −3/ 2 . The deceleration parameter is
q=−
( A′t1/ 2 ) ( − 14 A′t −3/ 2 )
R(d 2 R / dt 2 )
=
−
= 1.0
−1/ 2 2
1
(dR / dt ) 2
′
( At )
2
(b) Starting with (dR / dt ) 2 = 83π G ρ m R 2 , we take the derivative with respect to time:
dR d 2 R 8π d ρ m 2 8π
dR ⎞
⎛
2
G
R +
G ρm ⎜ 2 R
=
⎟
2
3
3
dt dt
dt
dt ⎠
⎝
With ρ m = CR −3 where C is a constant, d ρ m / dt = −3CR −4 (dR / dt ) = −3ρ m R −1 (dR / dt ) and
2
dR d 2 R 8π ⎛
dR
dR ⎞
8π
dR
G ⎜ −3 ρ m R
=
+ 2ρm R
⎟ = − G ρm R
2
dt dt
3 ⎝
dt
dt ⎠
3
dt
311
q=−
R(d 2 R / dt 2 ) (4π / 3)G ρ m R 2 4π G ρ m
=
=
(dR / dt ) 2
(dR / dt ) 2
H2
where the last step uses H = R −1 (dR / dt ) .
13.
With U = (4.72 ×103 eV/m3 ⋅ K 4 )T 4 = (7.56 × 10−16 J/m3 ⋅ K 4 )T 4 , Equation 15.32 for the
radiation-dominated universe gives
t=
3
3c 2
3(3.00 × 108 m/s) 2
=
=
32π G ρ r
32π GU
32π (6.67 × 10−11 N ⋅ m 2 /kg 2 )(7.56 × 10−16 J/m3 ⋅ K 4 )T 4
= (2.31×1020 s ⋅ K 2 )T −2
1/ 2
⎛ 2.31× 1020 s ⋅ K 2 ⎞
T =⎜
⎟
t
⎝
⎠
14.
T=
(a)
=
1.5 × 1010 s1/2 ⋅ K
t1/ 2
mc 2
940 ×106 eV
=
= 1.09 × 1013 K
−5
k
8.617 × 10 eV/K
2
2
⎛ 1.5 ×1010 s1/2 ⋅ K ⎞ ⎛ 1.5 ×1010 s1/2 ⋅ K ⎞
−6
t =⎜
⎟ =⎜
⎟ = 1.9 × 10 s
13
T
1.09
10
K
×
⎝
⎠ ⎝
⎠
mc 2
140 × 106 eV
T=
=
= 1.62 × 1012 K
−5
k
8.617 × 10 eV/K
(b)
2
2
⎛ 1.5 ×1010 s1/2 ⋅ K ⎞ ⎛ 1.5 ×1010 s1/2 ⋅ K ⎞
−6
t =⎜
⎟ =⎜
⎟ = 8.6 × 10 s
12
T
1.62
10
K
×
⎝
⎠ ⎝
⎠
T=
15. (a)
mc 2
500 ×106 eV
=
= 5.8 ×1012 K
−5
k
8.617 × 10 eV/K
2
(b)
16.
2
⎛ 1.5 × 1010 s1/2 ⋅ K ⎞ ⎛ 1.5 × 1010 s1/2 ⋅ K ⎞
−6
t =⎜
⎟ =⎜
⎟ = 6.7 ×10 s
12
T
⎝
⎠ ⎝ 5.8 ×10 K ⎠
N E > E0
V
∞
= V −1 ∫ N ( E )dE =
E0
∞
8π ∞ 2 − E / kT
8π
E e
dE =
x 2 e− x dx
(kT )3 ∫
3 ∫E
3
E0 / kT
(hc) 0
(hc)
312
8π
8π
3
2 −x
−x
−x ∞
⎡
⎤⎦
kT
x
e
xe
e
(
)
2
2
(kT )3 e− E0 / kT
=
−
−
−
=
3
3
⎣
E
kT
/
0
(hc)
(hc)
f =
N E > E0 / V
N /V
=
8π (kT )3
e − E0 / kT
3
7
3
−3
−3
(hc) (2.03 × 10 m ⋅ K )T
8π (8.617 × 10−5 eV/K)3 (109 nm/m)3 − E0 / kT
=
e
(1240 eV ⋅ nm)3 (2.03 ×107 m −3 ⋅ K −3 )
= 0.42e
17.
(a)
− E0 / kT
(c)
⎡⎛ E0 ⎞ 2
⎛ E0
⎢⎜
⎟ + 2⎜
⎝ kT
⎣⎢⎝ kT ⎠
⎡⎛ E0 ⎞ 2
⎛ E0 ⎞ ⎤
2
+
⎢⎜
⎟
⎜ kT ⎟ + 2 ⎥
⎝
⎠ ⎦⎥
⎣⎢⎝ kT ⎠
⎞ ⎤
⎟ + 2⎥
⎠ ⎥⎦
⎞ ⎤
⎟ + 2⎥
⎠ ⎦⎥
E0
= 25
kT
gives
E0
2.22 ×106 eV
=
= 1.0 ×109 K
25k 25(8.617 ×10−5 eV/K)
2
(b)
⎡⎛ E0 ⎞ 2
⎛ E0
⎢⎜
⎟ + 2⎜
⎝ kT
⎢⎣⎝ kT ⎠
⎡⎛ E0 ⎞ 2
⎛ E0 ⎞ ⎤
2
+
⎢⎜
⎟
⎜ kT ⎟ + 2 ⎥
⎝
⎠ ⎦⎥
⎣⎢⎝ kT ⎠
1
f = ×10−8 = 0.42e − E0 / kT
6
T=
⎡⎛ E0 ⎞ 2
⎛ E0 ⎞ ⎤
⎢⎜
⎟ + 2⎜
⎟ + 2⎥
⎝ kT ⎠ ⎥⎦
⎣⎢⎝ kT ⎠
2
⎛ 1.5 × 1010 s1/2 ⋅ K ⎞ ⎛ 1.5 ×1010 s1/2 ⋅ K ⎞
t =⎜
⎟ =⎜
⎟ = 225 s
9
T
⎝
⎠ ⎝ 1.0 × 10 K ⎠
−8
f = 10 = 0.42e
T=
− E0 / kT
⎡⎛ E0 ⎞ 2
⎛E ⎞ ⎤
+ 2 ⎜ 0 ⎟ + 2⎥
⎢⎜
⎟
⎝ kT ⎠ ⎥⎦
⎣⎢⎝ kT ⎠
gives
E0
= 24
kT
E0
13.6 eV
=
= 6600 K
24k 24(8.617 ×10−5 eV/K)
2
2
⎛ 1.5 × 1010 s1/2 ⋅ K ⎞ ⎛ 1.5 × 1010 s1/2 ⋅ K ⎞
12
5
t =⎜
⎟ =⎜
⎟ = 5.2 × 10 s = 1.6 × 10 y
T
6600
K
⎝
⎠ ⎝
⎠
These times are not very different from those computed using 10−9 for the matterantimatter imbalance.
18.
With N p / N n = 0.60 / 0.40 = 1.5 , we have
Nn
= e −ΔE / kT
Np
or
⎛N
ΔE
= − ln ⎜ n
⎜ Np
kT
⎝
313
⎞
⎟⎟ = ln(1.5) = 0.41
⎠
T=
ΔE
1.3 MeV
=
= 3.7 × 1010 K
−5
0.41k 0.41(8.62 ×10 eV/K)
2
2
⎛ 1.5 × 1010 s1/2 ⋅ K ⎞ ⎛ 1.5 ×1010 s1/2 ⋅ K ⎞
t =⎜
⎟ =⎜
⎟ = 0.17 s
10
T
⎝
⎠ ⎝ 3.7 × 10 K ⎠
19.
20.
21.
With ρ = 0.046 ρcr = 0.046(0.97 × 10−26 kg/m3 ) = 4.5 × 10−28 kg/m3 . This amounts to 0.27
nucleons per cubic meter, or about 1 nucleon in every 4 cubic meters.
1 star
= 2.2 × 10−58 stars/m3 so the
2.0 × 1030 kg
average spacing is (2.2 ×10−58 ) −1/ 3 = 1.65 × 1019 m = 1700 light-years .
1 galaxy
(b) ρ = 0.046 ρcr = 0.046(0.97 × 10−26 kg/m3 )
= 3.7 × 10−70 galaxy/m3 so the
42
1.2 × 10 kg
−70 −1/ 3
average spacing is (3.7 ×10 ) = 1.39 ×1023 m = 1.5 × 107 light-years .
(a) ρ = 0.046 ρcr = 0.046(0.97 × 10−26 kg/m3 )
From Equation 15.8, the present photon density (with T = 2.73 K) is
N / V = (2.07 × 107 photons/m3 ⋅ K 3 )(2.73 K)3 = 4.1× 108 photons/m3
If the universe has its critical mass and if 23% is nonbaryonic dark matter, then the
density of the nonbaryonic dark matter is 0.23(0.97 × 10−26 kg/m3 ) = 2.2 ×10−27 kg/m3 . If
4.1 × 108 neutrinos have a mass of 2.2 × 10−27 kg, then one neutrino has a rest energy of
E = mc 2 =
2.2 ×10−27 kg
1
(3.00 × 108 m/s) 2
= 3.0 eV
8
4.1×10
1.60 × 10−19 J/eV
This fairly close to the upper limit on the rest energy of the electron neutrino (see Table
14.4), but well within the limits on the rest energies of the muon and tau neutrinos.
22.
(a) At T = 2.73 K, kT = 2.352 × 10−4 eV and E/kT = 10630 for E = 2.5 eV. Then from
Equation 15.37 we have
N ( E )dE 8π E 2 − E / kT
8π (2.5 eV) 2 (1.0 eV)
e
dE
e −10630 = 2.9 × 10−4596 m −3
=
=
3
3
9
3
V
(hc)
(1240 eV ⋅ nm) (1 m/10 nm)
In doing this evaluation, it is helpful to replace ex with 10x log e.
Such a small density is impossible to observe.
(b) Again using Equation 15.37,
314
e − E / kT =
N ( E )dE (hc)3
100 cm −3 (1240 eV ⋅ nm)3 (1 m/109 nm)3
=
= 1.21×10−12
2
3
2
V
8π E dE (1 m/100 cm)
8π (2.5 eV) (1.0 eV)
from which E/kT = 27.4, and so kT = (2.5 eV)/27.4 = 0.091 eV and T = 1060 K. This
temperature occurred at time
2
2
⎛ 1.5 × 1010 s1/2 ⋅ K ⎞ ⎛ 1.5 ×1010 s1/2 ⋅ K ⎞
14
6
t =⎜
⎟ =⎜
⎟ = 2.0 ×10 s = 6.4 ×10 y
T
1060 K
⎝
⎠ ⎝
⎠
2
23. (a)
(b)
(c)
2
⎛ 1.5 × 1010 s1/2 ⋅ K ⎞ ⎛ 1.5 ×1010 s1/2 ⋅ K ⎞
12
5
t =⎜
⎟ =⎜
⎟ = 9.0 × 10 s = 2.9 × 10 y
T
5000
K
⎝
⎠ ⎝
⎠
This occurred during the time when atoms were forming.
Em = (2.33 × 10−4 eV/K)T = (2.33 ×10 −4 eV/K)(5000 K) = 1.17 eV
The nucleon rest energy is 940 MeV, so the ratio of the energy densities is
ρ r ρ r c 2 109 (1.17 eV)
=
=
= 1.24
ρ m ρ m c 2 940 ×106 eV
24.
(a) We assume that ρ r = ρ m occurred after antimatter annihilation. With 109 photons per
nucleon and an average photon energy of Em, then
ρr ρr c 2
109 Em
109 (2.33 ×10−4 eV/K)T
=
=
=
=1
ρ m ρ m c 2 mnucleon c 2
940 × 106 eV
2
25.
or
T = 4000 K
2
(b)
⎛ 1.5 × 1010 s1/2 ⋅ K ⎞ ⎛ 1.5 × 1010 s1/2 ⋅ K ⎞
13
5
t =⎜
⎟ =⎜
⎟ = 1.4 × 10 s = 4.4 × 10 y
T
4000
K
⎝
⎠ ⎝
⎠
(a)
R = (12.3 km)( M / M ) −1/ 3 = (12.3 km)(2.00) −1/3 = 9.79 km
(b)
K = 12 I ω 2 =
1
2
(
2
5
MR 2 ) ω 2
= 15 (2.00)(1.99 ×1030 kg)(9.79 ×103 m) 2 (2π rad/s) 2 = 3.01× 1039 J
(c) With K = 12 I ω 2 , then dK = I ω d ω and dK / K = 2 d ω / ω :
Δω
ΔK = 2 K
= 2(3.01× 1039 J)(10−9 ) = 6.02 × 1030 J
ω
(d)
P=
ΔE
6.02 × 10 J
=
= 6.98 × 1025 W
Δt (1 d)(86400 s/d)
30
315
(e) If the radiation were distributed uniformly over a spherical surface at the Earth’s
distance d = 104 light years = 9.46 × 1019 m, the fraction of the power received by the
antenna of area A would be
Preceived = Ptransmitted
26.
A
10 m 2
25
(6.98
10
W)
=
×
= 6.21× 10−14 W
2
19
2
4π d
4π (9.46 × 10 m)
(a) With t ∝ hi c j G k , we have [t ] = [ h ] [ c ] [G ] where
i
j
k
[ ] indicates dimensions.
Inserting the appropriate units, we have
s = (J ⋅ s)i (m ⋅ s −1 ) j (N ⋅ m 2 ⋅ kg −2 ) k = (kg ⋅ m 2 ⋅ s −1 )i (m ⋅ s −1 ) j (m3 ⋅ s −2 ⋅ kg −1 ) k
= (kg)i − k (m) 2i + j +3k (s) − i − j − 2 k
Equating powers of the units on both sides of the equation, we obtain
i−k =0
2i + j + 3k = 0
− i − j − 2k = 1
which can be solved to give i = 1/ 2, j = −5 / 2, k = 1/ 2.
hG
(6.626 ×10−34 J ⋅ s)(6.67 ×10−11 N ⋅ m 2 /kg 2 )
=
= 1.3 × 10−43 s
5
8
5
c
(3.00 ×10 m/s)
(b)
t=
(c)
R = ct = (3.00 ×108 m/s)(1.3 × 10−43 s) = 3.9 × 10−35 m
27. By taking differentials of Equations 2.23a and 2.23d, we obtain
dx′ =
dx − u dt
1 − u 2 / c2
and
dt ′ =
dt − (u / c 2 )dx
1 − u 2 / c2
Making the substitutions in the expression for (ds′) 2 ,
2
⎡ c dt − (u / c)dx ⎤ ⎡ dx − u dt ⎤
(ds′) = (c dt ′) − (dx′) = ⎢
⎥ −⎢
⎥
2
2
2
2
⎣ 1− u / c ⎦ ⎣ 1− u / c ⎦
2
2
2
2
=
c 2 (dt ) 2 − 2u dx dt + (u 2 / c 2 )(dx) 2 − (dx) 2 + 2u dx dt − u 2 (dt ) 2
1 − u 2 / c2
=
c 2 (1 − u 2 / c 2 )(dt ) 2 − (1 − u 2 / c 2 )(dx) 2
= c 2 (dt ) 2 − (dx) 2 = (ds ) 2
2
2
1− u / c
316
28. (a) For small angles, the distance between I and the horizontal axis is θ d S , the distance
between S and the axis is β d S , and the distance between I and S is α (d S − d L ) . Thus
θ d S = β d S + α (d S − d L )
From Equation 15.22, after inserting the extra factor of 2 to account for the difference
between special and general relativity for the deflection angle, we have (again for small
angles)
4GM 4GM
α=
=
θ d Lc2
bc 2
so
4GM
θ dS = β dS +
(d − d L )
θ d Lc2 S
(b) We can rewrite this equation as
θ E2
4GM
θ =β+
−
=
β
+
(
d
d
)
L
θ dLdS c2 S
θ
or
θ 2 − βθ − θ E2 = 0
with θ E = 4GM (d S − d L ) / c 2 d S d L . Using the quadratic formula then gives the solutions
(
θ ± = 12 β ± β 2 + 4θ E2
)
and the difference between the angular positions of the two images is
Δθ = θ + − θ − = β 2 + 4θ E2
(c) For β = 0, we have θ = θ E and the problem has rotational symmetry about the
horizontal axis. The image of the star is thus a circle.
317