B-TACT (TACTICAL ACCESSORIES) CC 2015

Transcription

B-TACT (TACTICAL ACCESSORIES) CC 2015
B-TACT
(TACTICAL ACCESSORIES) CC
Product Catalogue
2015
B-TACT (TACTICAL ACCESSORIES) CC
Table of Contents
Background
3
Tactical Slings & Belts
4
Shooter Mats
7
Drag Bags
8
Discrete Bags
10
Universal Taper Rifle Bags
13
Duffle Bags
16
Grab-Bags
18
Range Bags
20
Mag-Grip, Scope Guard and Suppressor Cover
22
Tactical Vests
23
Drop Leg Rigs & Holsters
24
Pouches and Patches
26
Suppressors
31
Ghillie Suits
32
General Terms and Conditions
34
Order Form
39
Contact details: [email protected]
Website: http://www.b-tact.co.za
2|Page
B-TACT (TACTICAL ACCESSORIES) CC
The beginning …
B-Tact (tactical accessories) was established in 2005 to meet the growing demand for tactical accessories especially
since imports were rarely available in the specifications required for the specific task at hand. When an imported
product could be obtained certain adjustments had to be made to the product before it could be utilized for the
purpose you had in mind which was time consuming as well as costly and in certain instances impacted the
efficiency of the product.
The designing of the first products began soon after. The product line continuously grew with every new product
concept and development. Even with the extended product line we still ensure that the products we sell are
products that we will proudly use ourselves
The Name B-Tact …
We found that to design tactical accessories we had to think, analyse and become tactical for the designs and
products to be effective and efficient, therefore the name B-Tact was an obvious choice.
What B-Tact offer …
The tactical accessories that we produce are of high quality and offer durability even in extreme conditions. In
addition on request certain custom adjustments can be done on all products, taking into account that the prices of
the specific product would vary according to adjustment requested.
Bags are manufactured according to customer material preference of 600D or Rip-Stop Canvas material which is
available in a variety of colours. The following 3 colours are our standard colours: Black, Military Green and Sand
Contact details: [email protected]
Website: http://www.b-tact.co.za
3|Page
B-TACT (TACTICAL ACCESSORIES) CC
PRODUCTS: TACTICAL SLINGS & BELTS
Tactical Sling: Single Point with bungee cord
A tactical sling permits fast and easy transition between your
primary weapon and other weapon systems.
Product code: TS 001
Tactical Sling: Two Point (3rd point optional)
A tactical sling permits fast and easy transition between your
primary weapon and other weapon systems.
Product code: TS 002
Rifle Sling
A Plain rifle sling 50mm wide
Product code: TS 003
Ammunition Waist Belt
A Broad waist-belt with loops or pockets for holding ammunition
(e.g. shotgun ammunition waist-belt)
(Ammunition NOT included)
Product code: TS 004
Contact details: [email protected]
Website: http://www.b-tact.co.za
4|Page
B-TACT (TACTICAL ACCESSORIES) CC
PRODUCTS: TACTICAL SLINGS & BELTS (continue….)
Tactical Sling: Dual / Biathlon
This tactical sling has 2 shoulder straps that give the operator the
ability to carry the primary weapon (rifle) system on his back.
(Rifle NOT Included)
Product code: TS 005
View from another side.
(Rifle NOT Included)
Contact details: [email protected]
Website: http://www.b-tact.co.za
5|Page
B-TACT (TACTICAL ACCESSORIES) CC
PRODUCTS: TACTICAL SLINGS & BELTS (continue….)
Weigh belt: Large Molle Rig
This padded tactical belt is 70mm in width and has a dual adjustable
quick release buckle, with its large Molle type design makes it ideal
for use of drop leg rigs
Product code: TS 007
Tactical Weigh belt:
This stiff tactical belt is 50mm in width and has a quick release
buckle, with Velcro adjuster. This belt design makes it ideal for
use of drop leg rigs
Product code: TS 010
Tactical Sling: 2 Point Adjustable to 1 Point "Budget"
This is a budget sling, with a single layer 38mm webbing with a
38mm YKK quick release buckle and two 25mm loop connectors
Product code: TS 015
Contact details: [email protected]
Website: http://www.b-tact.co.za
6|Page
B-TACT (TACTICAL ACCESSORIES) CC
PRODUCTS: SHOOTER MAT
Shooter Mat: Plain
Dual layer Rip Stop Canvas
Open dimensions: 200cm x 80cm
Product code: SM 001
Shooter Mat: Pro
Dual layer Rip Stop Canvas with
100cm x 70cm x 0.5cm SVA closed cell inner
Open dimensions: 200cm x 80cm
Product code: SM 002
Shooter Mat: Ultimate
Dual layer Rip Stop Canvas with
100cm x 70cm x 0.5cm SVA closed cell inner with an
additional extension for rifle with Bipod and sleeve for
shooting chart or hydration pack.
Open dimensions: 200cm x 80cm
Open dimensions (with sleeve): 250cm x 80cm
Product code: SM 003
Contact details: [email protected]
Website: http://www.b-tact.co.za
7|Page
B-TACT (TACTICAL ACCESSORIES) CC
PRODUCTS: DRAG BAGS
Contact details: [email protected]
Website: http://www.b-tact.co.za
8|Page
B-TACT (TACTICAL ACCESSORIES) CC
PRODUCTS: DRAG BAGS
Drag Bag: Sniper Rifle with MOLLE system
Deep rifle bag for your primary weapon systems and due to the
Molle system it has diverse configuration capability.
Rifle is strapped into place for extra protection.
(Standard sizes: 120cm, 140cm, 150cm & 180cm)
(Custom sizes: available on order)
Product code: DGB 001
Drag Bag: Assault Rifle (No Molle system)
Deep rifle bag for your primary weapon system.
Rifle / Carbine is strapped into place for extra protection.
Product code: DGB 002
Drag Bag: Assault Rifle with MOLLE system
Deep rifle bag for your primary weapon systems and due to the
Molle system it has diverse configuration capability.
Rifle / Carbine is strapped into place inside for extra protection.
Product code: DGB 003
Drag Bag: Assault Rifle with MOLLE system
(View of back)
Contact details: [email protected]
Website: http://www.b-tact.co.za
9|Page
B-TACT (TACTICAL ACCESSORIES) CC
PRODUCTS: DISCRETE BAGS
Discrete Bag: Rifle
Standard deep rifle bag, with no extras fitted on the outside of the bag.
With inner straps the rifle is strapped into position for extra protection.
Product code: DSB 001
Discrete Bag: Assault Rifle
Standard deep rifle bag, with no extras fitted on the outside of the bag.
With inner straps the rifle is strapped into position for extra protection.
Product code: DSB 002 (Dimensions: 105cm x 35cm x 10cm)
Discrete Bag:
Standard deep rifle bag, with no extras fitted on the outside of the bag.
With NO Extras
Product code: DSB 004 (Dimensions: 70cm x 35cm x 10cm)
DSB 005 (Dimensions: 85cm x 35cm x 10cm)
DSB 006 (Dimensions: 120cm x 35cm x 10cm)
DSB 007 (Dimensions: 140cm x 35cm x 10cm)
Discrete Bag: Thin
Plain thin bag, padded with 5mm layer of SVA closed cell foam.
With NO Extras
Product code: DSB 008 (Dimensions: 70cm x 35cm)
DSB 009 (Dimensions: 85cm x 35cm)
DSB 010 (Dimensions: 120cm x 35cm)
DSB 011 (Dimensions: 140cm x 35cm)
Contact details: [email protected]
Website: http://www.b-tact.co.za
10 | P a g e
B-TACT (TACTICAL ACCESSORIES) CC
PRODUCTS: DISCRETE BAGS (continue….)
Discrete Bag: Handgun Caddy
Deep bag, with no extras fitted on the outside of the bag. It has 5 magazine pouches.
It has an inner sleeve, to keep 2 handguns in position and for extra protection.
Molle System can be fitted to expand versatility
(Handguns & Magazines NOT Included)
Product code: DGC 001
Discrete Bag: Handgun Caddy Universal
Deep bag, with no extras fitted on the outside of the bag. It has 4 magazine pouches.
It has Velcro strips to keep up to 2 large handguns (e.g. Beretta 92F) in position and for extra protection.
Molle System can be fitted to expand versatility. (Handgun, Holster and Magazines NOT Included)
Product code: DGC 003
Contact details: [email protected]
Website: http://www.b-tact.co.za
11 | P a g e
B-TACT (TACTICAL ACCESSORIES) CC
PRODUCTS: DISCRETE BAGS (continue….)
Discrete Bag: Handgun Traveller - Basic
Zip pouch, with wrist sling. No extras fitted on the outside of the bag. It has 2 magazine sleeves and a small utility pouch.
It will hold 1x large handguns (e.g. Beretta 92F) in position underneath an additional sleeve for extra protection.
Molle System can be fitted to expand versatility. (Handgun and Magazines NOT Included)
Product code: DGC 004
Contact details: [email protected]
Website: http://www.b-tact.co.za
12 | P a g e
B-TACT (TACTICAL ACCESSORIES) CC
PRODUCTS: UNIVERSAL TAPER RIFLE BAGS
Universal Taper Rifle Bag: 70
Deep rifle bag for your primary weapon systems (e.g. Hand Machine
Carbines/FN SCAR-L or LM5/LM6/Galil SAR folded). Molle system is an
added option.
Standard length of 70cm
Product code: UTB 001
Universal Taper Rifle Bag: 85
Deep rifle bag for your primary weapon systems (e.g. FN SCAR-H or
LM4/Galil ARM/FN FAL Para folded). Molle system is an added option.
Standard length of 85cm
Product code: UTB 002
Contact details: [email protected]
Website: http://www.b-tact.co.za
13 | P a g e
B-TACT (TACTICAL ACCESSORIES) CC
PRODUCTS: UNIVERSAL TAPER RIFLE BAGS (continue….)
Universal Taper Rifle Bag: 120 with MOLLE system
Deep rifle bag for your primary weapon systems and due to the Molle
system it has diverse configuration capability.
Standard length of 120cm
Product code: UTB 003
Universal Taper Rifle Bag: 140 with MOLLE system
Deep rifle bag for your primary weapon systems and due to the Molle
system it has diverse configuration capability.
Standard length of 140cm
(Rifle NOT Included)
Product code: UTB 004
(Shotgun NOT Included)
Contact details: [email protected]
Website: http://www.b-tact.co.za
14 | P a g e
B-TACT (TACTICAL ACCESSORIES) CC
PRODUCTS: UNIVERSAL TAPER RIFLE BAGS (continue….)
Universal Taper Drag Bag: 120 with MOLLE system
Deep rifle bag for your primary weapon systems and due
to the Molle system it has diverse configuration
capability.
Standard length of 120cm
Product code: UTDB 001 (120cm)
UTDB 002 (150cm)
Contact details: [email protected]
Website: http://www.b-tact.co.za
15 | P a g e
B-TACT (TACTICAL ACCESSORIES) CC
PRODUCTS: DUFFLE BAGS
Duffle Bag: 35l
This is a basic duffle bag with no hard edges or inners, which can be
rolled or folded to store away for later use.
It can be manufactured in a wide range of colours and in 600D
material or Rip Stop Canvas.
Product code: DB 001
Duffle Bag: 35l task force
Basically the same as the standard duffle bag with the addition of
shoulder straps for easier carry capability.
It can be manufactured in a wide range of colours and in 600D
material or Rip Stop Canvas.
Product code: DB 002
Duffle Bag: 50l
This is a basic duffle bag with no hard edges or inners, which can be
rolled or folded to store away for later use.
It can be manufactured in a wide range of colours and in 600D
material or Rip Stop Canvas.
Product code: DB 003
Duffle Bag: 50l task force
Basically the same as the standard duffle bag with the addition of
shoulder straps for easier carry capability.
Can be manufactured in a wide range of colours and in 600D material
or Rip Stop Canvas.
Product code: DB 004
Contact details: [email protected]
Website: http://www.b-tact.co.za
16 | P a g e
B-TACT (TACTICAL ACCESSORIES) CC
PRODUCTS: DUFFLE BAGS (continue….)
Duffle Bag: 80l wide open
This is a basic duffle bag with no hard edges or inners, which can
be rolled or folded to store away for later use.
It can be manufactured in a wide range of colours and in 600D
material or Rip Stop Canvas.
Product code: DB 005
Example of customised Duffle Bag Set
Contact details: [email protected]
Website: http://www.b-tact.co.za
17 | P a g e
B-TACT (TACTICAL ACCESSORIES) CC
PRODUCTS: GRAB-BAGS
GRAB-BAG: Shoulder Caddy & B.O.B.
This Grab-Bag is manufactured with Rip Stop Canvas, with 1 (one) large
compartment and features Molle System to fit any of a range of smaller
pouches. The bag has a 10mm YKK RC zip chain with 2 (two) steel sliders.
Inside the main compartment are 2 (two) sleeves fitted with velcro (loop)
to fit extras like e.g. holster, magazine pouches and other pouches. The
shoulder pads are padded with SVA closed cell foam for comfort and
durability.
Currently available in: Black, Military Green/Olive, Sand/Beige, Navy Blue
Product code: GB 005a (Caddy)
GB 005b (B.O.B.)
Contact details: [email protected]
Website: http://www.b-tact.co.za
18 | P a g e
B-TACT (TACTICAL ACCESSORIES) CC
PRODUCTS: GRAB-BAGS (continue….)
SCHOOL-BAG: Day pack type
This School-Bag is manufactured with Rip Stop Canvas, with 2 (two) large
compartments and 1 (one) small outer pouch. Every compartment has a
10mm YKK RC zip chain with 2 (two) steel sliders per compartment and
pouch. The shoulder pads and backside are padded with SVA closed cell
foam for comfort and durability.
(Currently available in: Black, Military Green/Olive, Sand/Beige)
Product code: GB 003
Contact details: [email protected]
Website: http://www.b-tact.co.za
19 | P a g e
B-TACT (TACTICAL ACCESSORIES) CC
PRODUCTS: RANGE BAGS
Range Bag: (with molle system)
Range Bag: Large
This Range Bag is manufactured with Rip Stop Canvas, with 1 (one) large compartment. All zips are YKK RC zip chain
with steel sliders. The range bag has 4 internal sleeve pouches with flap and 2 removable stiffeners inside the bag. The
bag features Molle system on all 4 sides making it more versatile and able to be setup to each shooters individual
needs.
Dimensions: 460mm x 260mm x 240mm
(Currently available in: Black, Military Green / Olive, Sand / Beige)
Product code: RB 001
Contact details: [email protected]
Website: http://www.b-tact.co.za
20 | P a g e
B-TACT (TACTICAL ACCESSORIES) CC
PRODUCTS: RANGE BAGS (continue….)
Range Bag: Medium
This Range Bag is manufactured with Rip Stop Canvas, with 1 (one) large compartment. All zips are YKK RC zip chain
with steel sliders. The range bag has 4 internal sleeve pouches with flap and 2 removable stiffeners inside the bag. The
bag features Molle system on all 4 sides making it more versatile and able to be setup to each shooters individual
needs.
Dimensions: 380mm x 200mm x 200mm
(Currently available in: Black, Military Green / Olive, Sand / Beige)
Product code: RB 002
Example of already customised Range Bag: Medium
Contact details: [email protected]
Website: http://www.b-tact.co.za
21 | P a g e
B-TACT (TACTICAL ACCESSORIES) CC
PRODUCTS: MAG-GRIP, SCOPE GUARD and SUPPRESSOR COVER
Mag-Grip:
This product gives one the ability to strap two magazines side by
side.
The blocks are made from aluminum for durability (set on left)
Magazine grips used in the set on the right are imported on special
request.
(Magazines Not Included)
Product code: MG 001
Scope Guard & Carry
This product is manufactured with a dual layer 600D material or Rip
Stop Canvas to make it durable.
It protects the scope and gives the sniper an easy way to carry the
rifle on the shooting range between exercises
It is adjustable, and fits most rifles with scopes.
(Rifle Not Included)
Product code: SG 001
Suppressor Cover:
This Cover is manufactured with Rip Stop Canvas and helps to
insulate the suppressor. The heat built up in a suppressor during
shooting can cause a mirage in front of the scope.
(Suppressor NOT Included)
Product code: SC 001
Contact details: [email protected]
Website: http://www.b-tact.co.za
22 | P a g e
B-TACT (TACTICAL ACCESSORIES) CC
PRODUCTS: TACTICAL VESTS
Tactical Vest: Front View
This tactical vest is manufactured with a durable mesh, with Molle System
all round for easy custom fitment of pouches.
It allows for a hydration pack to be fitted in the back
It is also adjustable on the shoulders and the sides
Product code: TV 001
Tactical Vest: Back view
Load Bearing Vest: Front View
This tactical vest is manufactured out of durable Rip Stop Canvas, with
Molle System all round for easy custom fitment of pouches.
 It is also has adjustable padded shoulder straps
 Adjustable side straps
 4 (four) adjustable stability straps to connect to waist belt
Colours: Black, Military Green/Olive, Sand/Beige, Navy Blue
Product code: TV 005
Load Bearing: Back view
Contact details: [email protected]
Website: http://www.b-tact.co.za
23 | P a g e
B-TACT (TACTICAL ACCESSORIES) CC
PRODUCTS: DROP LEG RIGS AND HOLSTERS
Drop Leg Holster: XX Large Pistol
This holster is manufactured for the Dual Pepper ball Pistol,
It has slots for extra ammo as well as gas propellant canisters
(Left hand holsters also available)
Colours: Black, Military Green/Olive, Sand/Beige, Navy Blue
Product code: DLR 002
Drop Leg Rig
This rig is fitted with Molle System and gives you the ability to carry
extra magazines of ammunition or smoke grenades on your leg for
easy access.
(Please specify for what side it’s needed)
Colours: Black, Military Green/Olive, Sand/Beige, Navy Blue
Product code: DLR 003
Drop Leg Holster: Large Pistol
This holster is manufactured to be carried on the operator’s thigh for
fast and easy transition between your primary weapon and handgun.
(Left hand holsters also available)
Product code: DLR 004
Contact details: [email protected]
Website: http://www.b-tact.co.za
24 | P a g e
B-TACT (TACTICAL ACCESSORIES) CC
PRODUCTS: DROP LEG RIGS AND HOLSTERS (continue….)
Drop Leg: Drop Pouch / Utility Pouch
This pouch is manufactured to be carried on the operator’s thigh
for fast and easy access for dropping spent cartridges or empty
magazines into.
(Left & Right sided available)
Product code: DLR 005
Holster: XX Large Pistol
This holster is manufactured for use with the Dual Pepper ball pistol
or other XX Large handguns, to be carried on the belt or with the
addition of shoulder sling be carried across the shoulder.
(Left hand holsters also available)
Product code: DLR 006
Holster: Adjustable to fit Tactical light or laser sight
This holster is manufactured to be carried on the operator’s thigh
for fast and easy transition between your primary weapon and
handgun. It is adjustable to fit a tactical light or laser sight
underneath the handgun
(Left hand holsters also available)
Product code: DLR 007
Contact details: [email protected]
Website: http://www.b-tact.co.za
25 | P a g e
B-TACT (TACTICAL ACCESSORIES) CC
Contact details: [email protected]
Website: http://www.b-tact.co.za
26 | P a g e
B-TACT (TACTICAL ACCESSORIES) CC
PRODUCTS: POUCHES AND PATCHES
Hand Radio Pouch: (Molle system)
This pouch fits most current hand radios been used in service and
is fitted with Molle straps, so it can be strapped onto tactical vests,
bags or drop leg rigs that employ Molle system
Product code: PS 001
Suppressor Pouch: (Molle system)
This pouch can be strapped into or onto tactical vests, bags or drop
leg rigs that employ Molle system
(Suppressor sold separately)
Product code: PS 002
Tactical Torch Pouch: (Molle system)
This pouch can be strapped into or onto tactical vests, bags or drop
leg rigs that employ Molle system. The pouch lid is adjustable to
accommodate a wider range of tactical torches
(Torches sold separately)
Product code: PS 039
Smoke / Stun Grenade Pouch: (Molle system)
This pouch can be strapped into or onto tactical vests, bags or drop
leg rigs that employ Molle system. The pouch lid is adjustable to
accommodate a wider range of smoke and stun grenades
Product code: PS 026
Contact details: [email protected]
Website: http://www.b-tact.co.za
27 | P a g e
B-TACT (TACTICAL ACCESSORIES) CC
PRODUCTS: POUCHES AND PATCHES (continue)
Ammunition Patch: (Molle system)
This patch can be strapped into or onto tactical vests, bags or drop leg
rigs that employ Molle system for easy access for e.g. 12GA Shotgun
ammunition
(Dummy rounds sold separately)
Product code: PS 003
Ammunition Patch - Large: (Molle system or Velcro)
This patch can be strapped into or onto tactical vests, bags or shooter
mat that employ Molle system or Velcro for easy access to ammunition.
Sizes: depends on quantity of ammo – 10, 20, 40 or 60 rounds
(Ammunition NOT Included)
Product code: PS 004
Magazine Pouch Large Pistol (adjustable)
This magazine pouch fits most large pistol magazines single / double
stack. It features an adjustable lid-strap to accommodate different
lengths of magazines. Due to the modular design the pouch can be
fitted on belts or any molle system rigs
Product code: PS 005a (Non-adjustable)
PS 005b (Single magazine pouch)
PS 005c (Double magazine pouch)
Contact details: [email protected]
Website: http://www.b-tact.co.za
28 | P a g e
B-TACT (TACTICAL ACCESSORIES) CC
PRODUCTS: POUCHES AND PATCHES (continue….)
Magazine Pouch: Assault – Molle System
This magazine pouch is for e.g. Ak47, Galil, AR15. It has bungee cord
retention system to keep the magazines in place.
It’s available with Molle system, the magazine pouches can be
connected to one another to become double magazine pouches
It is available in belt fit as well as Molle system.
Product code: PS 006a (fits 5,56 NATO magazines)
PS 006b (fits 7,62 NATO magazines)
Ammo Patch: Velcro
This ammo patch is fitted to shotgun with velcro and can be
removed. Because it has velcro (Hook) back it can be fitted to any
velcro (Loop) panel on rifle, tactical vest or rig for easy access
Product code: PS 025 (fits 12GA ammo)
Contact details: [email protected]
Website: http://www.b-tact.co.za
29 | P a g e
B-TACT (TACTICAL ACCESSORIES) CC
PRODUCTS: POUCHES AND PATCHES (continue….)
Rifle Rest (Sand- / Bean Bag):
This bag is manufactured with Rip Stop Canvas for durability and can
be carried empty and then be filled in the field with sand or client
can use his own choice of material to fill it.
(Rifle NOT Included)
Product code: PS 008a - dim: 15cm x 10cm x 10cm
PS 008b - dim: 20cm x 15cm x 10cm
PS 008c - dim: 20cm x 30cm x 10cm
Contact details: [email protected]
Website: http://www.b-tact.co.za
30 | P a g e
B-TACT (TACTICAL ACCESSORIES) CC
PRODUCTS: POUCHES AND PATCHES (continue….)
Club Magazine Pouch:
This bag is manufactured with 600D material or Rip Stop Canvas for
durability and can accommodate 8 (eight) double stack magazines
or 16 (sixteen) 1911 type single stack magazines.
(Magazines NOT Included)
Product code: PS 013
Xtra Kit Pouch – Molle System
These pouches are molle system pouches and are available in
different sizes. They are available as add-ons to our range bags,
tactical rifle bags or rigs.
(Currently available in: Black, Military Green / Olive, Sand / Beige)
Product code: PS 014 - dim: 12cm x 12cm x 6cm (M4-G2)
PS 015 - dim: 32cm x 12cm x 6cm (M8-G2)
PS 016 - dim: 16cm x 23cm x 6cm (M4-G4)
PS 017 - dim: 32cm x 23cm x 6cm (M8-G4)
Contact details: [email protected]
Website: http://www.b-tact.co.za
31 | P a g e
B-TACT (TACTICAL ACCESSORIES) CC
PRODUCTS: SUPPRESSORS
Suppressor: .22
These suppressors are made from steel that makes it durable. The
standard thread for .22 rifle is cut: ½ inch UNF (20 TPI).
They are available in 2 lengths.
Product code: SUP 001
Suppressor: .223 / 5.56mm NATO
These suppressors are made from steel that makes it durable. Thread
cut to client’s order
Please specify if suppressor is for bolt action or semi auto rifles.
Suppressor is available in aluminium for lighter product.
ALUMINIUM IS USED FOR BOLT ACTION USE ONLY!
Product code: SUP 002
Suppressor: .308 / 7.62mm
These suppressors are made from steel that makes it durable. Thread
cut to client’s order
Please specify if suppressor is for bolt action or semi auto rifles.
Suppressor is available in aluminium for lighter product.
ALUMINIUM IS USED FOR BOLT ACTION USE ONLY!
Product code: SUP 003
Suppressor:
NOTE:

Other caliber suppressors also available to be made on
request of client.

Suppressors also available in aluminium
Product code: SUP ### A – (aluminium)
Contact details: [email protected]
Website: http://www.b-tact.co.za
32 | P a g e
B-TACT (TACTICAL ACCESSORIES) CC
PRODUCTS: GHILLIE SUITS
Ghillie Suit: Tux
This Ghillie suit is built on a top base e.g. jacket or sweater. To provide
coverage to the legs while stalking the back is based on a tuxedo
pattern.
Product code: GST 001
Ghillie Suit: Full
This Ghillie suit basis is a full overall e.g. flight suit or a jacket and
pants.
Product code: GST 002
Ghillie Suit: Bush Rag
This Ghillie suit incorporates a poncho type base and is easy to get
into.
Product code: GST 003
NOTE: All Ghillie suits are available in 2 (two) variations:
1. Burlap and Jute coverage
2. Jute coverage only
Contact details: [email protected]
Website: http://www.b-tact.co.za
33 | P a g e
B-TACT (TACTICAL ACCESSORIES) CC
PRODUCTS: GHILLIE SUITS (continue ….)
PRODUCTS: Camo Range (continue ….)
Contact details: [email protected]
Website: http://www.b-tact.co.za
34 | P a g e
B-TACT (TACTICAL ACCESSORIES) CC
General Terms and Conditions
Unless otherwise agreed to in writing by B-Tact (Tactical Accessories) (hereinafter called "the Closed Corporation"), the following
terms and conditions shall apply to the supply of goods and services (hereinafter called "the Goods") by the Closed Corporation to the
Customer and shall take precedence over the Customer's Terms and Conditions of Sale.
1.
Obligation
A quotation represents no obligation until the Closed Corporation accepts the Customer's official Purchase Order.
2.
Instructions
Verbal instructions will not be accepted by the Closed Corporation under any circumstances. All instructions must be in writing
received per facsimile or e-mail.
3.
Specification
3.1. The Goods delivered will be in accordance with the specification in terms of the quotation. The Closed Corporation will not
be liable for non-compliance with any other specification. It is the Customer's responsibility to ensure that the Quotation
and Purchase Order are correct and in accordance with the drawings and/or specifications.
3.2. Changes to the drawings and/or specifications by the Customer will be undertaken only by agreement in writing with the
Closed Corporation. If any such changes cause an increase in the cost or time required for performance, the Closed
Corporation shall be entitled to an equitable adjustment in the contract price and the delivery schedule.
3.3. The order of precedence for this Purchase Order shall be the :
3.3.1. Closed Corporation’s design and/or specifications;
3.3.2. Customer's design and/or specifications;
3.3.3. Closed Corporation's Quotation;
3.3.4. Customer acceptance of the Close corporation’s quotations
3.3.5. Customer’s official purchase order and payment
4.
Applicable Law
The Quotation, Purchase Order and any Agreement that shall result there from shall be governed by the laws of the Republic of
South Africa.
5.
Payment
5.1. Unless otherwise agreed to in writing, the Customer shall effect payment for the Goods with placement of order. Interest
shall be paid on all overdue amounts at the rate of 1,5% per month or part thereof unless otherwise agreed.
5.2. All prices quoted are exclusive of VAT unless otherwise stated.
5.3. All prices quoted are exclusive of postage charges unless otherwise stated.
Contact details: [email protected]
Website: http://www.b-tact.co.za
35 | P a g e
B-TACT (TACTICAL ACCESSORIES) CC
5.4. In the event of the Customer failing to effect payment of the purchase price, the Closed Corporation shall be entitled, at its
option, and notwithstanding any indulgence or relaxation granted to the Customer without prejudice to any other rights it
may have in terms of this agreement or common law, to cancel this contract and repossess the Goods and/or claim the
balance thereof. The Closed Corporation shall be entitled to re-sell such Goods either by auction or by private treaty.
5.5. The Customer shall be liable for any shortfall or shall be passed a credit note for all amounts received in excess of the
expenses of recovery and resale.
5.6. The Customer shall be liable for all legal costs, including collection charges, incurred by the Closed Corporation in the
recovery of such debt on the Attorney and Own Client Scale.
The Customer shall pay all accounts in full and cannot exercise any rights of set-off or counterclaim against invoices submitted.
6.
Price Fluctuations
Unless otherwise stated the price quoted in the Quotation or Offer, the price is in South African Rands and exclusive of cost such
as freight, applicable insurances, coastal and landing charges, customs, dock and import duties, cartage and railage, rates of
exchange, any statutory costs and all other such similar encumbrances.
However, if after the date of the Closed Corporation’s Quotation (whether before or after the placing of the Purchase Order),
these costs will be for the Customer's account.
7.
Delivery
7.1. The Closed Corporation undertakes to make every effort to meet the delivery period as quoted, but does not guarantee to
do so. The Closed Corporation will not under any circumstances accept responsibility for delivery delays due to causes
beyond its control, including, but not limited to, acts of God, fire, explosion, strikes, lockouts, inability to obtain
components, delays by sub-contractors, actions by government, or losses and delays in transit. A reasonable extension of
time shall be granted to the Closed Corporation in event of any delays that are beyond its control. The place of delivery will
be as specified on the quotation.
7.2. Where the Goods are not delivered by the Closed Corporation or collected by the Customer, but are delivered to an
independent carrier, delivery to the carrier shall be deemed to be delivery to the Customer.
8.
Risk and Ownership
8.1. Where the Goods have been delivered pursuant to Clause 7.2, the appointed carriers shall be fully responsible for materials
lost or damaged in transit.
8.2. The ownership in the Goods shall not pass to the Customer until all amounts due from the Customer to the Closed
Corporation in respect of Goods sold, delivered or made available in any other way to the Customer has been paid for in full.
8.3. The Closed Corporation shall have the right at any time to give notice of its continued ownership in the Goods to every
possessor and every landlord of premises in which the Goods are stored or may be placed, whether for sale, repair,
assembly or otherwise.
8.4. Without prejudice to any of its rights in terms of law, the Closed Corporation reserves the right to enter the Customer's
premises and to repossess the Goods in the event of the Customer failing to make any payments on due date or at all.
Contact details: [email protected]
Website: http://www.b-tact.co.za
36 | P a g e
B-TACT (TACTICAL ACCESSORIES) CC
9.
Packaging, Packing and Shipment
Packing will be in accordance with the Closed Corporation’s standards, unless otherwise specified in writing. Any special packing
required by the Customer will be charged for as an extra.
10. Cancellation
10.1. In the event of cancellation by the Customer of the contract or part thereof, or in the event of the Closed Corporation
canceling the contract as a result of a breach by the Customer of any of these conditions, the Closed Corporation shall be
entitled to payment of a standard cancellation fee not less than 50% of the value of the contract so cancelled, or in the
case where a 50% deposit was paid by the Customer it will so be forfeited by the Customer to the Closed Corporation plus :
10.1.1.
The sales value of all Goods delivered.
10.1.2.
The sales value of all Goods finished and not delivered at the time of such cancellation.
10.1.3.
The sales value of all materials ordered by the Closed Corporation especially for such order whether such
materials have been received or not.
10.1.4.
The cost of all labour accumulated on any unfinished Goods in process of manufacture.
10.1.5.
The sales value of any special engineering and other costs incurred up to the time of cancellation.
10.2. The Closed Corporation shall be entitled to suspend or cancel further deliveries and to suspend or cancel work under this
or any other contract between the Closed Corporation and the Purchaser if any payment is overdue.
10.3. The Closed Corporation may, by notice in writing, cancel the Purchase Order if the Customer becomes insolvent or makes
an arrangement with its creditors or goes into voluntary liquidation or is placed under a provisional or final order of
sequestration or judicial management.
11. Warranty
11.1. Unless otherwise agreed in writing, the Closed Corporation warrants that in the event of any defect occurring within a
period of one year or any other period as agreed to in writing from the date of delivery to the Customer, as a result of
faulty material or workmanship which can be attributed to the Closed Corporation, the Closed Corporation will repair, or
refund the cost of the Goods at its option provided that :
11.1.1.
The Goods have not been misused, inadequately stored, neglected or used for other than its intended purpose, or
if its operating instructions have not been adhered to;
11.1.2.
The Goods have not been serviced by any person who has not been authorized by the Closed Corporation;
11.1.3.
The Closed Corporation is notified in writing within the warranty period and the Goods or faulty component
thereof is sent to the Closed Corporation's designated address at the Customer's risk.
11.2. Should any parts, materials or components forming part of the Goods sold by the Closed Corporation to the Customer, be
manufactured by anyone else than the Closed Corporation, then the manufacturer's normal warranty in respect of those
parts, materials or components shall apply and no further warranties in this regard will be given by the Closed Corporation.
The Closed Corporation's liability will not extend beyond that of the manufacturer's liability.
Contact details: [email protected]
Website: http://www.b-tact.co.za
37 | P a g e
B-TACT (TACTICAL ACCESSORIES) CC
12. Return of Goods
12.1. The Customer shall not be entitled to return any Goods to the Closed Corporation without the Closed Corporation's
express consent.
12.2. Unless otherwise agreed in writing, the Closed Corporation's normal express consent for the return of Goods shall be by
means of a Return Material Authorization (RMA).
12.3. No claim regarding material defects will be entertained by the Closed Corporation unless made in writing and delivered to
the Closed Corporation within the warranty period from the date of delivery of the Goods.
12.4. In the event of material defects or shortages in the Goods proved to the Closed Corporation's satisfaction and upon being
properly notified, the Closed Corporation shall at its option :
12.4.1.
Either exchange the Goods for similar Goods; or
12.4.2.
Repair the Goods.
12.5. If no material faults are found with the Goods, then the Closed Corporation will charge a handling fee of 50% of the sales
price of the Goods.
13. Indemnity
The Customer shall indemnify the Closed Corporation against all damages, penalties, costs, charges and expenses to which the Closed
Corporation may become liable as a result of work done in accordance with the Customer's drawings and/or specifications.
14. Liability
14.1. These terms set out the Closed Corporation’s entire liability in respect of the Goods and the Closed Corporation's liability
under these terms shall be in lieu and to the exclusion of all other warranties, conditions, terms and liabilities expressed or
implied statutory or otherwise in respect of the quality or the fitness for any particular purpose of the Goods.
14.2. The Closed Corporation shall not, under any circumstances, be liable for:
14.2.1.
Any loss or injury whatsoever (including indirect or consequential loss including loss of profit) arising from the
supply of the Goods, including any loss or injury (whether direct, indirect or consequential) attributed to any
negligent act of the Closed Corporation or the Closed Corporation's servants or agents'; or
14.2.2.
Any representations or warranties as to the Goods given by any of the Closed Corporation’s servants or agents;
14.2.3.
Any loss or injury (whether direct, indirect or consequential) attributed to any misuse of the Goods or any
negligent act by the Customer.
15. Intellectual Property Rights
Any patent, copyright or other intellectual property rights owned by the Closed Corporation shall remain those of the Closed
Corporation whether or not the purchase price under that transaction has been paid by the Customer. Any information obtained by
the Customer from the Closed Corporation which is identified as confidential and/or proprietary or is confidential and/or proprietary
in nature, may not be disclosed to any third party without the prior written approval of the Closed Corporation.
Contact details: [email protected]
Website: http://www.b-tact.co.za
38 | P a g e
B-TACT (TACTICAL ACCESSORIES) CC
16. General
16.1.
This document constitutes the sole and entire agreement between the parties.
16.2.
The Closed Corporation shall not be bound by any express or implied term, representation, warranty, promise or the like
not recorded herein.
16.3.
No addition to, variation of, or agreed cancellation of this contract shall be of any force or effect unless reduced to
writing and signed by both parties.
16.4.
No indulgence which the Closed Corporation may grant to the Customer party shall constitute a waiver of any of the
rights of the Closed Corporation, who shall not thereby be precluded from exercising any rights against the Customer
which may have arisen in the past or which might arise in the future.
17. Notices
All notices or demands to either party shall be in writing and may be served by hand delivery, registered mail, e-mail or facsimile at
the address of the receiving party as set forth in the Request for Quotation, Quotation or Purchase Order as applicable. All notices and
demands by mail shall be deemed to have been received within seven (7) days of postage, unless proved otherwise by the receiving
party.
Contact details: [email protected]
Website: http://www.b-tact.co.za
39 | P a g e
B-TACT (TACTICAL ACCESSORIES) CC
ORDER FORM
Kindly submit the completed form per e-mail at [email protected] or per fax to 086 670 6256.
PRODUCT
CODE
ADDITIONAL DESCRIPTION
COLOUR
SIZE
QUANTITY
CONTACT DETAILS (complete in PRINT)
NAME
_________________________________________________________________
SURNAME
_________________________________________________________________
CONTACT NUMBER
_________________________________________________________________
FAX NUMBER
_________________________________________________________________
E-MAIL ADDRESS
_________________________________________________________________
PREFERED CONTACT HOURS
_________________________________________________________________
Contact details: [email protected]
Website: http://www.b-tact.co.za
40 | P a g e