polishing - Star Struck, LLC

polishing
A. ‰ PolYWAtcH crYstAl PolisH
Removes scratches from watch crystals. Simply
polish scratched area with a piece of cotton or
wool using pressure for 2-3 minutes to renew the
luster of the crystal.
sst-988
A
remoVes scrAtcHes
$4.95
3 for $13.50
B. ‰ simicHrome PolisH
from watch crystals
Simichrome all metal polish brings gold, silver,
brass, aluminum, pewter, copper and stainless steel
to a brilliant shine. It also leaves a thin protective
coating to help prevent tarnishing. Simichrome is
available in a convenient 1.76 oz tube.
sst-40
$8.95
3 for $24.69
c. ‰ AUtosol metAl PolisH
This world-famous winner of International Gold
Medals provides a brilliant gloss finish. In a single
treatment, Autosol metal polish cleans and
conditions metal removing dirt and rust, while
leaving lasting protection from tarnishing.
B
sst-39
$8.95
3 for $24.69
d. ‰ WHite diAmond triPoli
Hard compound for use with brass copper,
aluminum, bronze, nickel, silver and soft metals.
Shipping weight - 2 lbs.
c
sst-1367
$9.79
3 for $27.00
e. ‰ roUge sticKs
Fine quality rouges for various polishing needs.
Each is 4 oz. and boxed for your convenience.
‰ roYAl red VelVet roUge
d
For producing final luster to gold and silver.
sst-1365
$3.59
3 for $9.90
‰ YelloW roUge
Very dry, low residue compound imparts
a brilliant finish to gold, silver, and platinum.
sst-1370
polishing
e
$2.75
3 for $7.80
f. ‰ crYstAl-Kleer PlAstic
reneWer
SST-1365
SST-1370
Makes old crystals new again by removing
scratches and blemishes. Wheel is charged with
compound, and the crystal is then gently buffed.
sst-415
$5.59
3 for $14.97
f
feAtUred item
Foredom Bench Lathe With
Tapered Spindles
See pg. 20
52
star struck, llc
| ph: 800-243-6144 | fx: 800-962-8345
Welding Without Laser!
‰ PUK3
professional and
PUK3 Professional PLUS
Dozens of uses: pinning bands, making repairs close to stone
without heating them, filling porosity, closing loops, repair and
retip prongs, and numerous fastening jobs. Both units require the
use of “Argon” gas to prevent oxidation at the weld point. Welding
is possible for all precious metals, stainless steel and titanium.
The PUK3 Professional and the PUK3 Professional Plus
include the following accessories:
• Mezzo Stereomicroscope • Soldering tweezers
• Handpiece
• Soldering pliers
• 10 Electrodes
• 2 year manufacturer warranty
• Diamond grinding wheel
*Additional accessories available upon request
A
“Mezzo” Stereomicroscope
included with both PUK3 models
a. ‰ PUK3 professional
PUK3 Automatic Spot Welder can be used to position small,
very precise welds in even hard to reach positions. Welding tips
from 0.7 to 2.0mm in diameter can be positioned. Starting from
the point of contact, the arc can be precisely controlled by the
device during the short burning time. The heat created is very
low! Therefore the piece being worked on can be hand-held.
The PUK3 has 9 easy adjustable settings that control energy
and 5 impulse settings. 115 Volts AC.
• The new micro-mode (welding of sheets within 0.10mm and
wires of 0.25 mm thickness)
• Joint-mode which is also much more efficient for silver.
Innovative it is also possible now to control the welding time in
milliseconds which is another great advantage of PUK 3.
PUK3
B
$4495.00
c
d
b. ‰ PUK3 professional PLUS
PUK3 Professional Plus extends the characteristics of the PUK3 Professional
by using a substantially stronger power module with 5 possible program
memories which releases more than 30% power over PUK3 professional.
The welding arc can be even more accurately controlled than with PUK3
Professional. This model has been designed for the ambitious user or
industrial applications. This model is simply the High-End unit in our range
of PUK - Generation 3.
PUK3 PLUS
$4995.00
c. ‰ Argon Gas Regulator
Regulates the flow of inert argon gas to
prevent oxidation, and give the piece
a clean, smooth finish.
PUK 600
$159.95
d. ‰
Replacement electrode
needles
PUK 300
Set of 10
$45.95
www.starstruckllc.com
53