Storage and handling solutions for the corrugated

Industrivej 3
DK - 5672 Broby
Denmark
+45 62 63 23 93
+45 40 84 41 93
www.bcmtranstech.com
[email protected]
Storage and handling solutions for the corrugated industri
Contents
About bcm transtech as
3
Flat bed die storage
4-5
Rotary die storage
6-7
Rotary die storage - Vertical
8-9
Stereo storage
10-11
Mobilator Rotary die
12-13
Mobilator Flat bed die
14-15
Covering wall
16
Washing mashine
17
Customized storage solutions
Worldwide sale
18-19
20
2
Dedication & innovation
For the last 15 years bcm transtech has been developing a wide range of storage
and handling solutions for cutting dies, stereos, thin cutting and offset plates.
These systems have been delivered to a large number of the leading corrugated
and solid board converters world wide. The systems can be supplied as manual,
semi automatic as well as fully automatic operated systems.
During the last few years bcm transtech has developed the following innovative
equipment:
RDC MOBILATOR for handling of RDC tools from the hydraulic
trolley which is placed in the bcm-storage. The RDC MOBILATOR is custom
designed from machine to machine depending on the size of the tools as well as
the layout around the machine. One operator can handle all sizes of RDC dies
without any help from colleagues. The RDC MOBILATOR can handle dies with
SERRAPID and POSILOCK cylinders as well as with screws.
Low cost manual storage solution for all rotary dies which is hanging in a rail system.
Storage solution for fl at bed dies. Single rack with crane without crane rail fi xation
to roof structure.
Please notice the following important things by using the bcm transtech storage
and handling systems:
No heavy lifting for the operators
One operator can handle the biggest dies without extra help from colleagues
No damages of the knives and the rubber during handling and storage of dies
Space saving: Storage facilities up to 8,5 meters in the height
Storage systems can be built above conveyor lanes
All bcm storage systems are modular designed, and all systems can be mixed
Easy to change and extend for future demands
The storage and handling solutions are sold and acknowledged
in more than 40 countries
3
Flat bed die storage
Modular storage for fl at bed dies
Increase your storage capacity with a fl at bed die storage
Use the cubic meters instead of the square meters
Manual, semi-automatic or full-automatic storage solutions
Safe and fast handling of dies from storage into production
Easy access to all fl at bed dies
Minimize maintenance costs for fl at bed dies
A good storage solution improves “Health and Safety”
No heavy lifting
5
Rotary die storage
Modular storage for rotary dies
Increase your storage capacity with a rotary die storage
Use the cubic meters instead of the square meters
Up to 8 meters in the height
Manual, semi-automatic or full-automatic storage
Safe handling of dies from storage into production
Easy access to all rotary dies
Minimize maintenance costs for rotary dies
A good storage solution improves “Health and Safety”
7
Vertical rotary die storage
This manually operated storage solution fi ts all kinds of rotary dies. The dies are
placed in a special aluminum rail system developed by bcm.
This solution is designed for dies with a length of up to 3000 mm, in all diameters.
Easy acces to each die
Safe handling in rack
Minimize damagage to the tools
Modular: Start sections, ready for future extensions
Easy to install and to move to other locations
Place the rack near the machine for the most frequently used dies
9
Stereo storage
Modular storage solution for stereos and printing plates
Increase your storage capacity with a stereo storage solution
Use the cubic meters instead of the square meters
Safe handling of stereos from storage into production
Easy access to all stereos
A good ergonomic solution
A good storage solution to improve the “Health and Safety” in the production
11
Mobilator rotary die
Pick up the rotary die in the bcm rotary storage
Bring the trolley to the machine
Use the mobilator to place the rotary die on the cylinder
No heavy lifting
No damage on tools during setup
13
Mobilator for flat bed dies
Pick up the fl at bed die in the bcm storage
Bring the die on the trolley to the machine
Use the mobilator to place the die on the turn table
No heavy lifting
No damage on tools during setup
15
Covering wall
Protect your dies from dust
Nice clean layout of your factory
Increased safety - tools can’t be pushed
through the storage
16
CLEANFlex Washing Machine
Fully automatic fl exo washing machine
Minimal consumption of water and energy
Low noise level belob 80 dB
Environmentally friendly
Twice as fast as manual washing
17
Customized solutions
15 years of experience in the corrugated industry, has made bcm transtech a serious
and credible partner, also when it comes to individual and versatile solutions.
Present the task to our agent or representative, and we will help you with a storage
or handling solution, that fi ts your needs and economy.
19
England
Sweden
BHS Corrugated Ltd.
BORIN AB
The Granary
Spårgatan 2
Congresbury
Box 656 SE-601 15
Bristol
Norrköping
BS49 5EB
Sweden
Phone : +44 (0) 1934839900
[email protected]
[email protected]
Phone : +46 11190630
France, Spain and Portugal
USA, Canada
Propco SAS
Hitek Equipment Inc.
Quartier Bois Vieux
8920 58th Place #700
26400 EURRE
Kenosha, WI 53144
Phone : +33 (0) 4.75.76.77.26
USA
[email protected]
Phone : 001 262 842 1700
www.propco-sas.com
[email protected]
Germany, Switzerland and Austria
Russia
Corrugated Solutions
VD-Com Ltd. Russia Moscow
Hahngericht
Bulvar G.Karbusheva 8.
D-58135 Hagen
Phone : +7 (499) 946-80-12\02
Phone : +49 (0) 17 17 71 45 54
Phone : +7 (495) 737-88-07
[email protected]
[email protected]
Benelux
Denmark
Corrusystems
bcm transtech as
Mazurkastraat 2
Industrivej 3
7323 KE Apeldoorn
DK - 5672 Broby
Phone : +31 612372900
Phone : +45 62 63 23 93 or +45 40 84 23 93
[email protected]
[email protected]
South America
Goettsch International Inc.
9852 Redhill Drive
Cincinnati, Ohio 45242-5627
USA
(513) 563-6500
[email protected]
www.bcmtranstech.com