Patent: D421,179
Transcription
Patent: D421,179
1 TABLE OF CONTENTS Gun Boot® Cases ...................................................................................... Specialty Boots & Brackets ....................................................................... KXP Accessories ....................................................................................... Rhino Grips ............................................................................................... Grips & Presses ........................................................................................ UTV Gun Rack ......................................................................................... Truck Accessories .................................................................................... Utility Gear Rail System ........................................................................... Lights ......................................................................................................... Stealth Exhaust System ........................................................................... Soft-Sided Luggage .................................................................................. Loungers ................................................................................................... Hard-Sided Storage (ATV) ....................................................................... UTV Storage/Consoles ........................................................................... Stereos ...................................................................................................... Basket Racks ............................................................................................ UTV Roofs ................................................................................................ UTV Windshields ..................................................................................... Riding Accessories ................................................................................... Plow Systems .............. ............................................................................... Plow Accessories ....................................................................................... DirtWorks Series ..................................................................................... Hitches / Frame Support ......................................................................... Notes .......................................................................................................... ® 4-6 6-8 9-12 13-14 14 14-15 16 17 18 19 20-21 22-23 24-25 26-29 30 31 32 33-35 36-41 42-43 44-45 46-50 51-53 54-55 Disclaimer: Kolpin reserves the right to make changes in our products without notice as the need arises. At the time of printing, we believe all specifications and applications are correct but are subject to change. For the latest information on application charts or instruction manuals, please check our website at www.kolpin.com. You can also e-mail our customer service directly at [email protected] or call us at 877-956-5746 UTV Compatible ATV Compatible Pickup Truck Compatible Utility Gear Rail Compatible 2 Made in the USA Limited Warranty: Kolpin Powersports is proud of the craftsmanship and materials used in producing our high-quality ATV and UTV products. Kolpin Powersports warrants our products to be free from defects due to materials or workmanship for a period of ONE (1) year to the original purchaser with proof of purchase. This warranty covers products found to be defective under normal use and conditions. Kolpin Powersports will, at our discretion, either repair or replace any defective product covered by this warranty. This warranty does not include reimbursement for labor or related costs in the event of component failure. 3 3 GUN B OOT S GUN BOOT ® IV Patent: D421,179 GUN BOOT ® 6.0 »» »» »» »» »» »» »» »» »» »» »» Mossy Oak® Breakup™ Features the largest interior room of all Kolpin® Gun Boot® cases Extra room for pistol grip type weapons & small bipods Easily fits firearms up to 51” in total length Provides ample room for up to 60mm scopes Hatchback design allows easy access Snap close cover with locking capability Ergonomically designed handle & molded attachment points for a sling Designed to accommodate left & right hand bolt action rifles & shotguns Utilizes all existing Gun Boot® IV brackets (sold separately) in order to mount to your ATV or UTV Not compatible with our UTV specific mounts (20036 & 20129) Compatible with the Utility Gear Rail System (20035 or 26510 required) 20025 Impact™ Realtree ® All Purpose™ Impact™ model (20061, 20091, 20050, 20051) »» Includes a removable 2 piece Velcro, shock absorbing foam & nylon Impact™ liner that provides superior interior protection Impact™ model (20025) Black »» Includes a removable Velcro, shock absorbing foam & nylon Impact™ liner that provides superior interior protection Transport™ model (20020) »» Includes a separate fully zippered soft carrying gun case that fits within the hard case instead of the standard Impact™ liner. »» Constructed of a durable Cordura exterior with full length zipper access »» Spacious interior includes two layers of dense closed cell foam providing the ultimate in protection, fit & convenience. “Case within a case” Transport Case Open Impact Liner in Gun Boot GUN BOOT ® 5.0 Impact model (20095) ™ »» Includes a removable 2 piece Velcro, shock absorbing foam & nylon Impact™ liner that provides superior interior protection Transport™ model (20090) »» Includes a separate fully zippered soft carrying gun case that fits within the hard case instead of the standard Impact™ liner »» Constructed of a durable Cordura exterior with full length zipper access »» Spacious interior of two layers of dense closed cell foam providing the ultimate in protection, fit & convenience Transport - Soft case fits inside the hard case 20061 Mossy Oak® BU ............................. MSRP - $105.79 20091 Realtree® AP ................................. MSRP - $105.79 20055 Black Transport™ ........................... MSRP - $ 94.29 20051 Black Impact™ ............................... MSRP - $ 59.79 20050 Black Five Pack ............................ MSRP - $ 52.89 (20050 - Order increments of 5 ONLY - price is $52.89 each) GUN BOOT ® 4.3 WITH UNIVERSAL BRACKET Patent: D477,141 Gun Boot® case & mounting system all in one! Universal built-in bracket mounts directly to your tubular ATV rack Bracket allows for multiple angle adjustments Ergonomically designed handle & molded attachment points for a sling Designed to accommodate left & right hand bolt action rifles & shotguns Provides ample room for firearms up to 51” in length, for 50mm scopes, & even rifles with slings attached. Transport™ model (20055) »» Includes a separate fully zippered soft carrying gun case that fits within the hard case instead of the standard Impact™ liner »» Constructed of a durable Cordura exterior with full length zipper access »» Spacious interior of two layers of dense closed cell foam providing the ultimate in protection, fit & convenience 20020 Transport™ 20025 Impact™ ................................ MSRP - $ 68.99 20020 Transport™ ............................ MSRP - $103.49 »» »» »» »» »» »» »» Most popular & versatile Gun Boot® case for over 10 years! »» The Kolpin® Gun Boot® IV case has traveled around the world & back & is an industry standard in hard cases. »» Only model available in Mossy Oak® Breakup or Realtree ® AP camouflage patterns »» Provides ample room for 50mm scopes & even rifles with slings attached or shotguns up to 51” in length »» Ergonomically designed handle & molded attachment points for a sling »» Designed to accommodate left & right hand bolt action rifles & shotguns »» Utilizes all existing Gun Boot® IV brackets (sold separately) »» Compatible with the Utility Gear Rail System The universal fit built in bracket adjusts without the use of any tools. »» Includes Gun Boot® case and universal bracket »» Removable 2 piece Velcro, shock absorbing foam & nylon Impact™ liner included »» Designed to accommodate left & right hand bolt action rifles & shotguns »» Provides ample room for 50mm scopes & even rifles with slings attached or shotguns up to 51” in length »» Compact design of this NEW bracket provides for universal fitment to most tubular ATV racks or UTV roll bars »» All mounting hardware included to fit 3 /4” - 2” round tubing and 3 /4” - 1 3 /4” square tubing »» Ergonomically designed handle & molded attachment points for a sling »» Protects your gun & optics on the trail »» Installs quickly & easily »» Dimensions are the same as the Gun Boot® IV, please see page 3 for specifics 20205 ............................... MSRP - $114.99 20095 Impact™.................................... MSRP - $114.99 20090 Transport™ ................................ MSRP - $149.49 4 4 5 5 GUN B OOT /B R A C K ET S GUN BOOT ® 4.3 WITH BRACKET GUN BOOT ® LOOP BRACKET »» »» »» »» »» »» »» »» »» »» »» ® Patent: 6,705,498 ® Includes Gun Boot IV case convenience with Gun Boot III case type mount! Includes Gun Boot® case and bracket Removeable, 2 piece shock absorbing foam and nylon Impact™ liner included Designed to accommodate left and right hand bolt action rifles and shotguns Provides ample room for 50mm scopes and even rifles with slings attached or shotguns up to 51” in length Compact design of this bracket provides for universal fitment to most ATV racks or UTV roll bars Ergonomically designed handle and molded attachement points for a sling Protects your gun and optics on the trail Installs quickly and easily All mounting hardware included Made in the USA »» Fits Gun Boot® IV, Gun Boot® 6.0 & Saw Boot cases only! »» Universal fit mounting system will accommodate nearly all ATV racks »» All-metal constructed loop bracket »» Bracket can be adjusted to multiple angle positions between 0° & 45° »» Rubber coated ring holds your Gun Boot® case securely »» Locking pin prevents additional movement & vibration when bouncing over rugged terrain »» Compact design provides more room on ATV racks »» Can also be mounted to the bed rail of a UTV or to any flat (drillable) surface! 20053 ............................... MSRP - $103.49 20032 .................................. MSRP - $57.49 UTV DOUBLE GUN BOOT ® IV MOUNT BOOTTECTOR® BRACKET »» Fits Kolpin® Gun Boot® IV case only! »» Mounts to UTV rear mesh or center roll bar tubing »» Securely mount two Gun Boot® cases (sold separately) »» Heavy-duty construction with multiple attachment points »» Bracket does not interfere with rear dump box use »» Fits Yamaha Rhino 2004-2008 Models »» Does NOT fit Polaris/Ranger Models »» Fits Kolpin® Gun Boot® IV, Gun Boot® 6.0 & Saw Boot cases only! »» Compact design provides more room on the ATV rack »» Lightweight & extremely durable »» Mounts to nearly all ATV racks »» Adjusts without the use of any tools »» Offers precision gun angle adjustability »» Compatible with the Kolpin® Utility Gear Rail System 20035 ............................... MSRP - $68.99 20036 .......... MSRP - $160.99 GUN BOOT ® IV METAL BRACKET »» Accommodates Kolpin® Gun Boot® IV case only! »» Made to mount horizontally on the bed rail of most utility vehicles »» Gun Boot® case sold separately »» Mounting Base: 3.5”w & uses 1 1/2” bolt center TACTICAL GUN BOOT BRACKET ® TACTICAL GUN BOOT ® »» Another industry first from Kolpin® – the only ATV/UTV hard case for tactical weapons! »» Specifically designed for sporting/tactical rifles up to 44” in length »» Ample space for 50mm scopes, & even attached bi-pods »» Hinged hatchback design provides quick access with snap close, lockable lid »» Includes revolutionary soft Transport™ case with full length zipper that unfolds into a gun rug or shooting mat »» Utilizes Tactical Gun Boot® Bracket (20105) only »» Dimensions: 45” l x 4” w x height varies (front 8”, rear 13”) 20100 ................................. MSRP - $172.49 6 6 »» Fits Tactical Gun Boot® case (20100) only! »» Heavy duty, metal loop style bracket »» Adjust to multiple angles between 0° & 45° for a custom fit on your ATV »» Locking pin prevents vibration & movement »» Compact design provides universal fit to tubular ATV racks while still leaving room for other valuable gear. »» Can even be mounted to your UTV bed rail or any flat, drillable surface! 20105 ................................ MSRP - $57.49 20129 .. MSRP - $63.24 GUN BOOT IV ONE PIECE BRACKET ® Patent: D452,290 »» Fits Kolpin® Gun Boot® IV & Gun Boot® 6.0 cases only! »» One piece design with superior geometry »» Mounts quickly to either side of your tubular ATV rack »» Metal wire pin lock keeps Gun Boot® case in place to prevent vibration & movement »» Pre-set angle design is a perfect fit for intermediate & smaller sized ATV’s »» Gun Boot® IV & Gun Boot® 6 case sold separately 20029 ........................... MSRP - $45.99 UNIVERSAL GUN BOOT ® /SAW BOOT BRACKET »» Fits Kolpin® Gun Boot® IV, 4.3, 6.0 cases and Saw Boot only! (sold separately) »» Universal bracket fits most ATV tubular steel racks or UTV frames up to 2” diameter (Also fits square tubing) »» All metal constructed loop bracket »» Bracket can be adjusted to multiple angle positions between 0° and 45° »» Rubber coated ring holds your Gun Boot® case securely »» Bracket design lets you utilize your entire ATV rack 20200 ............................ MSRP - $57.49 7 7 KX P A C C ES S OR I ES IN BED DOUBLE GUN BOOT ® 6.0 MOUNT »» Secure mount cradles two Kolpin® Gun Boot® 6.0 cases (sold separately) in the bed of your UTV »» Mounting location does not interfere with rear visibility »» Compact design allows plenty of bed space »» Accommodates Gun Boot® 6.0 case only (sold separately) »» 20005 - Bed dimensions: 47.5” min - 55” max »» 20010 - Bed dimensions: 43.5” min - 48.5” max * Ranger Full Size Boxes 2005-current use Kolpin part number 20006 - KXP In Bed Single Gun Boot® Mount on pg. 12 20005 .................................................... MSRP - $91.99 Fits models: Polaris Ranger*, Polaris Ranger XP, Kawasaki Mule, Arctic Cat Prowler 20010 .................................................... MSRP - $91.99 Fits models: Yamaha Rhino, Polaris Ranger 400, Kymco UXV, Kawasaki Teryx Finally.... a selection of Kolpin® Accessories compatible with Polaris® composite racks and/or bed rails using the Polaris® Lock & Ride® system!!! SAW BOOT »» Secure & protect your chain saw when traversing over rough terrain »» Fits up to a 20” bar »» Fits in standard Kolpin® Gun Boot® brackets Simply remove your Gun Boot® case & install your Saw Boot!!! »» Designed to be used with Universal Gun Boot® IV Bracket (20032 - sold separately), Boottector® Bracket (20035 - sold separately), or Universal Gun Boot® / Saw Boot Bracket (20200 - sold separately) »» Saw can be quickly secured/removed with a bungee tie down »» Included heat shielding allows for carrying a hot saw »» Universal fit for most ATV racks The Kolpin® X-Pansion system (KXP) uses our unique expansion plunger - Simply attach, tighten with NO tools, & ride! Specially designed mounting plates line up your Kolpin® accessory perfectly with existing OEM rack mounts. The Kolpin® KXP system provides secure accessory positioning with quick & easy changeover. Now you can attach all of our world famous Gun Boot® cases, including the newest Kolpin® Gun Boot® 6.0 case - all with a twist of the wrist. Quickly mount our handy Fuel Pack Jr. for extra fuel on a trail ride... or use our versatile Rhino Grip holders to carry utility tools... whatever your use requires, we have you covered!!! Purchase extra KXP plungers to attach Kolpin® molded boxes or even your own accessories - the possibilities are endless! The terms POLARIS & LOCK & RIDE are registered trademarks of Polaris Industries, Inc. Kolpin® Outdoors, Inc. is not affiliated with Polaris Industries Inc. & the products shown in this catalog are not endorsed or sponsored by Polaris Industries, Inc. 20600 .......................................... MSRP - $68.99 KXP PLUNGER »» Ergonomically designed handle with brass insert »» Expanding plunger provides a solid attachment for accessories »» Available in two different sizes (ATV & UTV) »» Easy installation - no tools required »» Quick on/off - change accessories by rotating the power twist handle »» Compatible with Polaris ® composite ATV racks /UTV bed rails using the Polaris ® Lock & Ride ® System »» 98500 ATV - 1” Diameter x 1 1/2” »» 98510 UTV - 1.25” Diameter x 4 1/4” UNIVERSAL FIT SAW PRESS® II BRACKET Patent: D442,454 »» Transport your chain saw securely & safely on any ATV »» Heavy duty, black powder-coated metal bracket is designed to attach any model chain saw to an ATV »» Rubber pads provide cushion & tight fit »» Hinged design for quick removal »» Holds saw in vertical position or 45˚ in either direction »» Accommodates any brand chain saw with up to 20” bar »» Fits most ATV’s with tubular racks 98500 ...................................... MSRP - $11.49 98510 ...................................... MSRP - $17.24 20044 ................................................ MSRP - $80.49 8 8 98500 - ATV 98510 - UTV 9 9 KX P A C C ES S OR I ES KXP SADDLE STORAGE GEN 2 EUW N CT P ROD »» Easy installation to Polaris ® Ranger bed rails using the Polaris ® Lock & Ride ® locations »» (2) Kolpin KXP plungers included »» Lockable latch »» Provides 1.1 cu ft of weather resistant storage »» Dimensions: 22”l x 12.25”w x 12.50”h 4413 POLARIS UTV ................. MSRP - $143.74 KXP ATV MIRROR »» »» »» »» Fully adjustable 4” mirror Safely view who is behind you Easy installation - no tools required Quick on/off - by rotating the power twist handle »» Compatible with Polaris ® composite ATV racks using the Polaris ® Lock & Ride ® System 97205 POLARIS ATV .............. MSRP - $34.49 KXP POLARIS® SPORTSMAN MOUNTING KIT FOR FRONT TRAIL BOX (93101) »» Brackets securely mount Front Trail Box #93101 (sold separately) to Polaris ® front composite ATV racks 2005- newer using the Polaris ® Lock & Ride ® System »» Mount kit includes (2) mounting brackets & (4) 98500 KXP ATV Plungers & all hardware »» Quick & easy attachment/removal of your Front Trail Box »» Custom design mounting brackets incorporate KXP mounting system »» Only fits the Kolpin® Front Trail Box #93101 (sold separately) »» Compatible with Polaris ® ATV composite front racks using the Polaris ® Lock & Ride ® System only 21517 - UTV KXP RHINO GRIP XL 21511 POLARIS ATV (Pair) .................... MSRP - $45.99 21512 POLARIS UTV (Pair) .................. MSRP - $51.74 93103 POLARIS ATV ...................................... MSRP - $28.74 KXP RHINO GRIP XL DOUBLE 21516 POLARIS ATV (Pair) .................... MSRP - $74.74 21517 POLARIS UTV (Pair) .................... MSRP - $80.49 21511 - ATV »» Durable flexible grips cushion & protect while providing a custom fit »» Rotates 360˚ & tilts 0˚ - 180˚ in 45˚ increments »» NEW Kwik clip design for on/off rotational in field adjustments »» Custom design base plate incorporates built-in KXP mounting system »» Compatible with Polaris ® composite ATV racks /UTV bed rails 2005 newer using the Polaris ® Lock & Ride ® System KXP POLARIS® SPORTSMAN MOUNTING KIT 21516 - ATV 21512 - UTV FOR REAR TRAIL BOX (93201) »» Brackets securely mount Rear Trail Box #93201 (sold separately) to the rear composite rack of your Polaris ATV 2005 - newer using the Polaris Lock & Ride System »» Mount kit includes (2) mounting brackets & (4) 98500 KXP ATV Plungers, (2) Kwik Cinch Straps & all hardware »» Quick & easy attachment/removal of your Rear Trail Box »» Included Kwik Cinch straps provide additional security without drilling your OEM rack »» Custom design mounting brackets incorporate KXP mounting system »» Only fits the Kolpin® Rear Trail Box #93201 (sold separately) »» Compatible with Polaris ® composite ATV rear racks using the Polaris ® Lock & Ride ® System only 93203 POLARIS ATV ........................................ MSRP - $28.74 10 10 KXP RATCHETING RHINO GRIP »» Soft cross pattern rubber grips provide increased cushioning & gripping power for items in a variety of shapes & sizes »» Heavy duty design carries guns, bows, fishing poles, ice augers, shovels, rakes, farm tools, etc. »» Kwik Clip design for on/off rotational in field adjustments »» Quick release button opens the grip quickly for easy access to gear »» Ratcheting design allows for securing items from 1-4 inch diameter »» Custom design base plate incorporates built-in KXP mounting system »» Compatible with Polaris ® composite ATV/UTV bed rails using the Polaris ® Lock & Ride ® System 21541 POLARIS ATV (Pair) ................................. MSRP - $68.99 21542 POLARIS UTV (Pair) ................................. MSRP - $74.74 21541 - ATV 21542 - UTV 11 11 RHI NO G R I P S KXP GUN BOOT ® 5.0 »» Gun Boot® 5.0 case & mounting system all in one! »» Complete system includes - universal built-in bracket that mounts directly to your Polaris ® ATV rack / UTV Bed Rail »» Designed to accommodate left & right hand bolt action rifles & shotguns »» Bracket allows for multiple angle adjustments »» Custom design base plate incorporates built-in KXP mounting system »» Compatible with Polaris ® composite ATV racks / UTV Bed Rails using the Polaris ® Lock & Ride ® System RHINO GRIPS All Rhino Grips include - ATV Bracket Impact™ model »» Includes a removable, shock absorbing foam & nylon Impact™ liner »» Provides ample room for firearms up to 51” in length, for 50mm scopes, & even rifles with slings attached. 21505 21500 21500 Single ................................................... MSRP - $28.74 21505 Double .................................................. MSRP - $45.99 21520 Window Mount Suction Cup ................... MSRP - $34.49 21525 Window/Wall Mount Adhesive Strip ........ MSRP - $34.49 Transport™ model »» Includes a separate soft carrying gun case that fits within the hard case instead of the standard Impact™ liner. »» Constructed of a durable Cordura exterior with full length zipper access 20097 Impact™ (POLARIS ATV) ............................. MSRP - $137.99 20096 Transport™ (POLARIS ATV) ........................ MSRP - $172.49 20099 Impact™ (POLARIS UTV) ............................ MSRP - $149.49 20098 Transport™ (POLARIS UTV) ........................ MSRP - $183.99 »» Durable flexible grips that cushion & protect while providing a custom fit »» Rubber securing straps »» Utilize Rhino grips in any vehicle! They are designed to fit trucks, SUV’s, UTV’s, RV’s, trailers, pretty much anything that has a smooth surface! »» Sold as a pair (2) »» Fit all tubular ATV racks - drilling required to mount on composite racks UTV Bracket The universal fit built in bracket adjusts without the use of any tools. »» Single Grip features off-set mounting to maximize rack space »» Fits all ATV tubular racks »» 21520 only - includes (4) industrial grade suction cups for secure mounting on glass surface »» 21525 only - includes industrial strength adhesive strip for secure mounting on any smooth surface 21520 21525 21510 XL Single ............................................... MSRP - $34.49 21515 XL Double .............................................. MSRP - $63.24 21530 XL Bar Mount ......................................... MSRP - $34.49 »» »» »» »» »» KXP GUN BOOT ® IV OR 6.0 LOOP BRACKET »» »» »» »» »» Fits Kolpin® Gun Boot® IV, Gun Boot® 6.0 & Saw Boot cases only! All-metal constructed loop bracket Bracket can be adjusted to multiple angle positions between 0° & 45° Rubber coated ring holds your Gun Boot® case securely Locking pin prevents additional movement & vibration when bouncing over rugged terrain »» Compact design provides more room on ATV racks »» Custom design base plate incorporates built-in KXP mounting system »» Compatible with Polaris ® composite ATV racks using the Polaris ® Lock & Ride ® System KXP IN BED SINGLE GUN BOOT ® MOUNT 12 »» Secure mount cradles ONE Gun Boot® 6.0 case in bed of your Polaris Ranger® 2005 - current »» Mounting location does not interfere with rear visibility »» Compact design allows for plenty of accessible bed space »» Compatible with Polaris ® Lock & Ride ® system »» Gun Boot® Case sold separately »» Install as many as SIX Gun Boot® 6.0 cases in the back of your Ranger!! (additional mounts sold separately) 20006 POLARIS FULL SIZE RANGER UTV »» Fits Kolpin® Gun Boot® IV, Gun Boot® 6.0 & Saw Boot cases only! »» Compact design provides more room on the ATV/UTV »» Lightweight & extremely durable »» Adjusts without the use of any tools »» Offers precision gun angle adjustability »» Custom design base plate incorporates built-in KXP mounting system »» Compatible with Polaris ® composite ATV/UTV racks using the Polaris ® Lock & Ride ® System 20350 POLARIS ATV ....................... MSRP - $80.49 20351 POLARIS UTV ....................... MSRP - $86.24 20033 POLARIS ATV ........................... MSRP - $68.99 12 KXP BOOTTECTOR® BRACKET First fully adjustable grip that does not need tools Rotates 360˚ Tilts 0˚ - 180˚ in 45˚ increments Larger heavy duty mounting base fits tubing 3/4” - 2” diameter Kwik clip design for on/off rotational in field adjustments 21510 RHINO GRIP XL UTV MOUNT 21515 »» Mount directly to your UTV roll bar »» Heavy-duty base provides multiple mounting orientations for UTV roll bars from 7/8” – 2” diameter »» Can also be mounted to any vertical or horizontal surface such as your UTV bed, garage wall, tool box, or just about anywhere! »» Flexible grips are able to tilt between 0° & 180° in 45° increments to hold gear in a variety of sizes & shapes. »» Sold as a pair (2) 21535 ................................................... MSRP - $34.49 RUBBER STRAPS Replacement Straps (2) for the following products 21500 Rhino Grip® - Single 21505 Rhino Grip® - Double 21510 Rhino Grip® XL - Single 21511 KXP Rhino Grip® XL - ATV 21512 KXP Rhino Grip® XL - UTV 21515 Rhino Grip® XL - Double 21516 KXP Rhino Grip® XL Double - ATV 21517 KXP Rhino Grip® XL Double - UTV 21520 Rhino Grip® w/ Suction Cup Mount 21525 Rhino Grip® w/ Adhesive Mount 20072 Gun Grips® II MSRP - $57.49 87010 Pair .................................... MSRP - $5.74 21530 21535 13 13 UT V GUN R A C K RATCHETING RHINO GRIPS »» Soft cross pattern rubber grips provide increased cushioning & gripping power for items in a variety of shapes & sizes »» Heavy duty design carries guns, bows, fishing poles, shovels, rakes, farm tools, etc. »» Kwik Clip design for on/off rotational in field adjustments »» Quick release button opens the grip quickly for easy access to gear »» Ratcheting design allows for securing items from 1-4 inch diameter »» Dimensions: 9” h x 4” when opened, 1” when closed 21540 .............................................. MSRP - $57.49 UTV GUN RACK RUBBER STRAPS »» Replacement rubber strap for the Kolpin® UTV Gun Rack (20073) »» (2) Straps Included »» Please note UTV Gun Rack requires a total of (2) straps »» Dimensions: 8 1/4” long 70732 Pair ................ MSRP - $5.99 UTV GUN RACK ATV ICE AUGER HOLDER »» Securely holds standard size Ice Augers in v-shaped lockers and straps »» Auger Holder attaches to tubular ATV rack, either perpendicular to vehicle or parallel to vehicle for narrow portages or pathways »» Easily attaches to front or rear ATV racks with thumbscrews and U-bolts »» No tools required to remove from ATV 26100 ................................. MSRP - $91.99 UTV GEAR TRANSPORT SYSTEM »» In cab gun rack mounts to the floor or cargo bed of your UTV or truck for easy access to your firearms »» Safely & securely hold either a shotgun or scoped rifle »» Constructed with a heavy-duty over-molded butt section to securely hold the stock of your firearm »» Over molded v-blocks with tough rubber straps provide firearm & barrel support »» Fits UTV’s with flat floor such as 2009-current Polaris Ranger »» Gun Rack Mount adapter riser (20074) required for Polaris 2008 & earlier & Yamaha 2007 & earlier utility vehicles with center transmission hump »» Other specific adaptor plates available »» Will accommodate a firearm in a protective gun sock »» Adjustable height from 27 1/2” to 35 1/2” »» Fully adjustable, angling up to 45˚ in either direction »» Base Dimensions: 5.25”w x 6” front to back 20073 ............................................. MSRP - $103.49 »» Compatible with Kolpin® Gear Grips ®, Boottector® Bracket, Gun Boot® 5.0, Fuel Pack Jr. »» Accommodates round roll bars varying in diameter from 1.25” (31.75 mm) to 2” (50.8 mm) »» Mounting angle adjusts in 15˚ increments 26200 ........................... MSRP - $34.49 UTV GUN RACK RISER MOUNT UTV OVERHEAD GUN CARRIER »» Adjustable length 20 1/2”-28 1/2” to fit many UTV models (inside of UTV frame) »» Rubber coated ends protect the frame from scratching »» Foam padding protects your firearms and provides secure fit »» Designed to hold 2 firearms »» No tools required for assembly, easy on / easy off 20078 ....................... MSRP - $91.99 UTV GUN RACK ADAPTOR PLATE RANGER MID-SIZE UTV GUN RACK ADAPTOR PLATE - TERYX »» Riser plate adapts UTV Gun Rack (20073 - sold separately) to Kawasaki Teryx 14 14 20076 ........................ MSRP - $40.24 »» Adapts UTV Gun Rack (20073 - sold separately) to Polaris Ranger Mid-Size »» Mounts securely to existing location on floor »» **No adapter needed for new 2010-current full size Ranger »» Does not fit 800cc Mid-Size 2008-current 20077 ................................. MSRP - $40.24 »» Riser plate adapts UTV Gun Rack (20073 - sold separately) for clearance on machines with raised transmission tunnel »» Dimensions: 4” w x 10 3 /4” holt to hole »» Will not accommodate the 2008-current Yamaha Rhino model with factory center console »» Fits models with center transmission hump such as 2004-2007 Yamaha Rhino, 2008 & earlier Polaris Ranger »» Does NOT fit 2013 Polaris ® XP 900 20074 ...................... MSRP - $40.24 15 15 UTILITY GEAR RAIL SYSTEM TRUCK ACCESSORIES UTILITY GEAR RAIL SYSTEM »» Stationary rail system mounts behind driver & passenger on UTV roll bar »» Fits parallel upright roll cages only! »» Universal mounting options for many Kolpin® accessories »» Accommodates Kolpin® Gear Grips ®, Rhino Grips, Gun Boot® IV, 5.0 & 6.0 cases, Boottector® Bracket, & ATV/ UTV Basket. »» Injection molded mounts accommodate tubing sizes from 1.25” - 2” »» Rail is made with heavy-duty 7 gauge extruded anodized black aluminum »» Cut-to-fit design »» Includes one versatile Gear Rail Bracket (26500) »» Does NOT fit Commander or Polaris RZR ROCK BLOCKER »» »» »» »» »» »» 26400 Universal (54 1/2”).......... MSRP - $160.99 Fits Compact, Mid-Size Full Size Vehicles and Dually Pickup Trucks Adjustable height and width for perfect fit-up. Width adjusts 66” to 94” Protect your ATV, Snowmobiles, Motorcycles, Vehicles and other towables Secures to a 2” ball mount Flaps are 24” x 24” x 3/8” thick rubber Easy Installation Specifically cut to fit the following 26400PS - Ranger - 54 1/2” 26400YA - Rhino - 46 1/ 8” 26400JD - Gator - 47 5/16” 26400KC - Kymco - 50” 85300 ..................................... MSRP - $194.35 LOCK-IT RITE ATV SYSTEM The Lock-it Rite ATV System is a security and safety device uniquely designed to fit any pick-up truck with a 2” receiver. Prevent forward, backward, and side movement and protect against the ATV entering the cab in event of an accident. Built in, 2” Class 1 hitch receiver - ideal for pulling a small trailer. »» »» »» »» »» »» One of the many ways the Utility Gear Rail System works for you...... Faster and stronger than tie-down straps Universal fit to any pick-up truck with 2” receiver Easy installation / removal Heavy-duty steel construction Ideal for ATV’s and smaller UTV’s that can fit in a truck bed Incorporated accessory trailer hitch - rated 2,000 lb.. towing weight and 250lb tongue weight LGD-30-U ................................................. MSRP - $183.99 GEAR RAIL DOUBLE GUN BOOT ® MOUNT LOCK-IT RITE TRAILER SYSTEM »» »» »» »» Secure an ATV or UTV to your trailer for safe transport Faster and stronger than straps alone Prevents forward, backward, and side movement When not in use, simply remove the upright arm, leaving only the base plate attached to the floor of your trailer »» Takes up minimal floor space »» Comes with bolts for wood or steel trailer beds LGD-TRL-16 ................................... MSRP - $172.49 16 16 »» Everything you need to mount (2) Gun Boot® cases (sold separately) to the Utility Gear Rail System (26400) »» Includes (1) c-clamp, (2) metal Gun Boot® mounting plates, (2) Boottector® Gun Mounts, & all necessary hardware »» Separate purchase of Utility Gear Rail System (26400) required »» Accommodates Gun Boot® IV & 6.0 cases (not included) ** To accommodate multiple accessories, additional Gear Rail System Brackets (26500) can be purchased separately 26510 ........................................... MSRP - $172.49 GEAR RAIL SYSTEM ACCESSORY BRACKET »» Mount additional accessories to the Kolpin® Utility Gear Rail System with this accessory bracket »» Includes c-clamp & metal mounting brackets »» Can be utilized - U-Shaped • Vertical • Horizontal 26500 ....................... MSRP - $34.49 17 17 S T E ALT H EX HAUS T LIGHTS LIGHT BARS »» Sealed connector for all-weather applications »» Easy two wire installation »» Optimizes functional light spread and distance for increased visibility »» 270 Lumens of output per LED »» 6” Light Bar - 2160 Lumens / 1.5 Amps »» 8.4” Light Bar - 3240 Lumens / 2.3 Amps »» Extruded Aluminum housing with 93% optically pure PMMA lens »» IP68 dust and water intrusion rated »» Black powder coat with black Kolpin Lens »» Switch, wire harness and base mounts included »» Dimensions: 6” Light Bar - 6”l x 3.25”h x 3.5”w 8.4” Light Bar - 8.4”l x 3.25”h x 3.5”w 6” Light Bar 97991 - 6” LIGHT BAR .................. MSRP - $362.24 97992 - 8.4” LIGHT BAR ............... MSRP - $482.99 STEALTH EXHAUST SYSTEM 2.0 WITH HEAT SHIELD Patent: 6,591,935 »» The Stealth Exhaust is a secondary muffler designed to be used in conjunction with your stock system. It is not a replacement for your existing muffler! »» Reduces ATV & UTV exhaust noise by up to 5-7 decibels with no loss in performance! »» Universal design fits most ATV’s or UTV’s with a four-stroke engine »» High flow/low restriction muffler uses baffled design - no packing to burn out »» All mounting hardware & detailed instructions included »» No need for cumbersome welding or vehicle modifications (in most cases) »» Honda Models require an additional adapter (not included) »» Does NOT fit 2013 John Deere XUV 550, Yamaha Viking or Honda Big Red »» Dimensions: 12.25” long x 4.5” diameter 53570 Black ...................................................... MSRP - $172.49 8.4” Light Bar ADVANTAGES OF LED LIGHTING »» »» »» »» »» 50,000 hour life expectancy Very high lumens per watt No glass lens to break No bulbs to burn out No ballast to mount HONDA & UNIVERSAL BOLT-ON ADAPTER »» Fits Honda TRX 250, 300, 350, 400, 450 & Universal for other flat or concave OEM Muffler Outlets »» Includes gasket & self-tapping screws »» 3 1/4” diameter flange with 1 1/4” OD tailpipe DUALLY LIGHTS »» 4 LED per light in a compact package »» Unlimited use for trucks, ATV’s, UTV’s, trailers, toy haulers, RV’s, boats, etc. »» 1080 Lumens, less than 1 Amp draw »» No warm up, instant on/off »» No hot spots, vibration or bouncing beams »» Waterproof »» Off-road use only »» Works great for backup applications »» Switch, wire harness and base mounts included 97994 SINGLE FLOOD ................ MSRP - $149.49 97995 SINGLE SPOT .................. MSRP - $149.49 97996 DOUBLE FLOOD (Pair)..... MSRP - $287.49 97997 DOUBLE SPOT (Pair) ....... MSRP - $287.49 53520 ......................................... MSRP - $40.24 BULLiTT LED LIGHT »» »» »» »» »» »» »» »» Single 10 W Cree LED produces 900 Lumens Draws less than 1 Amp IP68 dust and water intrusion rated Cast aluminum housing 50,000 hour life span Wire harness included Single M6 Mounting Stud Dimensions: 2.25” diameter 97993 ................................... MSRP - $126.49 18 18 HONDA RUBICON BOLT-ON ADAPTER »» Fits all Honda 500 Rubicon »» Bolts on over OEM Spark Arrester using existing bolts »» 3 bolt design includes gasket 53530 ........................................... MSRP - $40.24 19 19 S OF T LUG G A G E Mossy Oak® Breakup™ MATRIX™ SEAT BAG »» Constructed of 600D nylon with exclusive Hydro Shield™ coating and UV protection coating »» Padded, back rest style seat for added comfort »» Features multi-piece, detachable gear bags with center Matrix cooler »» Center Matrix cooler section keeps up to a 12-pack of beverages cold with room for additional goodies. »» Patented water bottle holder zips out only when you need it »» Exterior shock-cord provides even more storage for your items such as gloves & jackets! »» Includes two removable gear bags with gusseted wet/dry compartments & water bottle pockets »» Web reinforced buckles attachments secure to any ATV rack »» 2.02 cubic feet of accessible storage »» Overall Dimensions 32” x 22” x 11” »» Side Pod Dimensions: 16” x 6” x 8” »» Available in black & Mossy Oak® Breakup™ 91150 Mossy Oak® Breakup™ ............ MSRP - $143.74 91155 Black .................................... MSRP - $132.24 Black TRAILTEC CARGO BAG Realtree® All Purpose™ 91165 Black .......................... MSRP - $137.99 91166 Realtree® AP™ ............. MSRP - $149.49 Cooler with Matrix™ grid to hold beverages & containers Realtree® All Purpose™ Cooler bag detaches for easy transport Black REAR SEAT BAG Black »» Constructed of 600D nylon »» Zipperless Design »» Quickly attaches to ATV rear rack using adjustable straps & quick release buckles »» Two spacious side pods & one rear pod for organization »» Includes padded seat for comfort & relaxation »» Available in Black or Realtree ® AP »» Overall Dimensions: 34.5” l x 19” w x 10.5” h »» Side Pod Dimensions: 18” x 8” x 7.5” »» 1.75 cubic ft of storage 91191 Black .................................. MSRP $103.49 91192 Realtree® AP™ ..................... MSRP $114.99 TRAILTEC DELUXE CARGO BAG »» »» »» »» »» »» »» »» »» »» »» TRAILTEC GEAR BAG »» »» »» »» »» »» »» »» »» »» Low profile, zipperless design UV protection coating Use on front or rear rack of your ATV Form-fitted rain/dust cover included Internal Sta-Con frame construction maintains bag shape and provides extra protection for your cargo Two metal cam buckles for quick/secure attachment Fully lined interior is light grey in color for high visibility Reflective material enhances visibility to provide a safer riding experience Dimensions: 13” l x 28” w x 9.5” h 2 cubic ft of storage »» Zipperless Design »» UV Protection coating »» Adjustable interior divider allows for gear organization & added protection »» Form-fitted rain/dust cover included »» Internal Sta-Con frame construction maintains bag shape & provides extra protection for your cargo »» Two metal cam buckles for quick/secure attachment »» Fully lined interior is light grey in color for high visibility »» Reflective material enhances visibility to provide a safer riding experience »» Dimensions: 15” l x 36” w x 14.5” h »» 4.5 cubic ft of storage »» »» »» »» Realtree® All Purpose™ Our largest available cargo bag Zipperless Design UV Protection coating Removable, roll-top cooler & accessory pods Easily fits up to 3 adult sized helmets with cooler removed Form-fitted rain/dust cover included Internal Sta-Con frame construction maintains bag shape & provides extra protection for your cargo One removable center cargo divider Two metal cam buckles for quick/secure attachment Fully lined interior is light grey in color for high visibility Reflective material enhances visibility to provide a safer riding experience Overall Dimensions: 22.5” l x 36” w x 14.5” h Side Pods: 7.5” l x 9” w x 11” h Back Rest: 17” w 4.96 cubic ft of storage Realtree® All Purpose™ 91175 Black .................................. MSRP - $206.99 91176 Realtree® AP™ ..................... MSRP - $218.49 Black Black 91160 Black ............................... MSRP $114.99 91161 Realtree® AP™................... MSRP $126.49 20 20 21 21 L OUNG ER S ATV REAR LOUNGER WITH COOLER »» Heavy duty, Rotomolded, & uv-stabilized LLDPE (linear low-density polyethylene) construction »» Perfect for transporting gear & other items »» Relax comfortably on the trail with integrated backrest, armrests & seat cushion »» Convenient arm storage compartments »» Mounts to most tubular racks using four U-bolts & sealing washers »» Center cooler has removable drain plug »» 2.5 cubic feet of weather resistant storage in arms »» Cooler Dimension: 13” l x 4” w x 6.5” h »» Dimensions: 39.75” l x 27.88” w x 17” h 4421 ............................................. MSRP - $367.99 F A B C D E (base) 4421 38” 12” 24” 21” 13” 16.5” 4438 37.5” 11” 26” 21.75” 13” 15” 4447 33.5” 10.5” 27” 21” 13” 12” * Approximate Measurements ATV REAR LOUNGER WITH HELMET STORAGE »» Perfect lounger with easy storage access »» Heavy duty, Rotomolded, & uv-stabilized LLDPE (linear low-density polyethylene) construction »» Accommodates up to two adult helmets or other large items »» Mounts to most tubular racks using four U-bolts & sealing washers »» Opens in the rear with access to arm cavities »» 3.5 cubic feet of weather-resistant storage »» Dimensions: 36.75” l x 27.88” w x 17” h 4438 ................................................... MSRP - $264.49 ATV KOLPIN LEGACY LOUNGER EW N CT PRODU »» The perfect lounger with easy storage access »» Accommodates up to two adult helmets or other large items »» Heavy duty, black rotomolded, and uv-stabilized LLDPE (linear low-density polyethylene) »» Easily mounts to tubular racks using four U-bolts and sealing washers »» Includes comfortable padded backrest and seat cushion »» Lockable latch »» Dimensions: 33.5” l x 27” w x 10.5”h 4447 ................................................... MSRP - $206.99 22 22 23 23 HARD LUG G A G E FRONT TRAIL BOX NAVIGATOR BOX »» »» »» »» »» »» »» »» Conveniently sized storage box Rotomolded construction with snap closure Rear hinged lid won’t warp or dent Molded in rear step design allows box to be mounted with no rack modifications Mounts to most tubular racks using four U-bolts & sealing washers 4.3 cubic feet of accessible storage Dimensions: 36” l x 19” w x 14” h Front to back base footprint - 14” »» »» »» »» Contoured design allows for minimum sight reduction while operating ATV Great storage for supplies & equipment Double wall lid construction for added rigidity Roto-molded UV-stabilized LLDPE (linear low-density polyethylene) construction »» Separate heavy duty keyed lockable center latch »» Dimensions: 30.25” l x 13.5” w x 8.8” h »» If mounting on a 2005-current Polaris ® ATV with Lock & Ride ® front rack, use our 93103 Accessory Mount Kit 93101 ............................................................ MSRP - $149.49 93405 ........................................................ MSRP - $114.99 REAR TRAIL BOX »» Contoured design allows for maximum use of rack space »» Large storage area that fits up to 2 XL helmets with extra storage room »» Double wall lid construction for added rigidity allows for extra weight of the optional Accessory rack (93202 - sold separately) »» Roto-molded UV-stabilized LLDPE (linear low-density polyethylene) construction »» Separate heavy duty keyed lockable center latch »» Dimensions: 37” l x 17.3” w x 13.6” h »» Fits most machines including the BRP Outlander Max »» If mounting on a 2005-newer Polaris ® ATV, use our 93203 Accessory Mount Kit SCOUT BOX »» »» »» »» »» Low-profile front or rear box Rotomolded construction with snap closure 2.5 cubic feet of accessible storage Dimensions: 34” l x 14” w x 9” h Mounts to most tubular racks using four U-bolts & sealing washers 93400 ............................... MSRP - $80.49 93201 ..................................................... MSRP - $172.49 Navigator and Scout Box »» »» »» »» Economical rotomolded storage boxes Single wall construction Molded in hinges Pin lock latch can be replaced with a padlock for security (not included) ACCESSORY RACK »» »» »» »» »» Designed to be used with Kolpin® Rear Trail Box (93201 - sold separately) Heavy duty 1/2” tubular steel construction Threaded tubular ends allow for easy mounting on molded box lids Holds up to 150 lbs. Base dimensions: 26 5/8” l x 9 3/8” w 93202 .............................................. MSRP - $57.49 OUTFITTER BOX BUCKET HUGGER™ II »» Molded design cradles up to (2) 5 gallon buckets & (1) Fuel Pack Jr. securely (not included) »» Removable, snap closure lid provides additional security when transporting gear »» Great for hauling all your gear whether hunting, ice fishing, landscaping or just hitting the trails »» Mounting hardware included »» Dimensions: 27” l x 14.5” w x 8.5” h 91750 ............................................ MSRP - $91.99 24 24 »» Largest hard-sided storage box offered by Kolpin® »» Easily accommodates 4 adult sized helmets & more!!! »» Reinforced structure accepts (2) Fuel Pack Jr.’s with mounting brackets »» Lid has molded-in tray & double wall construction for extra storage capacity & rigidity »» Includes Kwik-Cinch straps for quick on/off attachment & metal Accessory Rack for increased load carrying capacity »» Fits most ATV tubular & composite racks »» Dimensions: 42.5” l x 21.5” w x 16.75” h »» Front to back base footprint - 13” in the center between the rear of the seat to the rear of the rack, 19” on the outside 93450 ..................................................... MSRP - $287.49 25 25 UT V STOR A G E RHINO UNIVERSAL UTV RHINO COOLER TRUNK »» Constructed of heavy duty, Rotomolded, & uv-stabilized LLDPE (linear low-density polyethylene) with foam insulated body »» Unique design allows for convenient storage, separating ice & beverages from your dry goods »» 2 large wet/dry storage areas with drain plugs »» Provides 1.0 cu ft of storage in each area »» Center wet/dry storage area with removable lid, storage tray, & drain plug »» Center area provides .4 cu ft of additional secure storage »» Fits all Rhino Models »» 46” w (42 ½” between the bed rails) x 24” l (front-back) x 17 ¼” h UTV SADDLE STORAGE BOX »» Easy installation to inside bed rails of most utility vehicles »» Provides 1.375 cu ft of weather resistant storage Dimensions: 26.875” l x 4.875” w x 14.75” h 4408 - Single ............................... MSRP - $114.99 1478 ................................ MSRP - $459.99 (2 boxes shown) UNIVERSAL SADDLE STORAGE GEN 2 »» Easy attachment to any UTV dump box edge with a flat mounting surface »» Lockable latch »» Provides 1.1 cu ft of weather resistant storage »» Dimensions: 22” l x 12.25” w x 12.50” h 4412 - Single ............................... MSRP - $114.99 NOEDUW CT PR RHINO CROSSOVER TOOL BOX »» Constructed of heavy duty, Rotomolded, & uv-stabilized LLDPE (linear low-density polyethylene) »» Provides weather resistant storage for your valuable tools & gear »» Lockable gull wing doors can be easily accessed from either side of your utility bed »» Scissors-type locking strut hold lids open for convenient access »» Fits all Rhino Models »» Bed Dimensions: 43.75” min x 54” max 1479 ......................................................... MSRP - $344.99 BENCH CENTER CONSOLE »» Easily access necessary gear »» Padded lid exterior features straps (not shown) to secure your laptop when work calls »» Heavy-duty, black Rotomolded, & uv-stabilized LLDPE (linear low-density polyethylene) construction »» Two cup holders »» Overall Dimensions: 21”l x 10”w x 8”h 4470 ............................... MSRP - $172.49 26 26 OVERHEAD CONSOLE WITH MIRROR RHINO CENTER CONSOLE 2004-2007 »» Provides additional overhead storage »» UTV rear mirror included »» Rear mirror features a convex lens providing high visibility over rough terrain »» Rear mirror is easily adjustable »» Universal clamps attach to roll bars even with a roof installed »» Fits 1 3/4” roll bars only »» Dimensions: 9.25”l x 5.5”w x 6”h 4480 ..................................MSRP - $114.99 »» Features a weather resistant storage compartment with lid & two cup holders »» Fits 2004-2007 Yamaha Rhino 700 models without factory center console »» Fits all 450 Rhino Models without factory center console »» Stainless Steel hardware included »» Dimensions: 16”l x 12.75”w x 10.25”h 1421 ..... MSRP - $114.99 27 27 UT V STOR A G E POLARIS RANGER® TERYX RANGER FRONT TRAIL BOX »» Additional gear storage for your Ranger »» Easy installation to your Ranger’s existing mounting points »» Rugged, roto-molded design includes KXP mounting points that are Polaris Lock & Ride compatible »» Conveniently attach KXP accessories such as Rhino Grips for added hauling versatility »» Fits full size Ranger models 2009-current »» Does NOT fit 2013 Ranger XP 900 »» Metal mounting framework included »» Dimensions: 46” x 22” x 6 2692 ....................................................... MSRP - $229.99 TERYX COOLER TRUNK TERYX CENTER CONSOLE »» Constructed of heavy duty, Rotomolded, & uv-stabilized LLDPE (linear low-density polyethylene) with foam insulated body »» Unique design allows for convenient storage, separating ice & beverages from your dry goods »» 2 large wet/dry storage areas with drain plugs »» Provides 1.0 cu ft of storage in each area »» Center wet/dry storage area with removable lid, storage tray, & drain plug »» Center area provides .4 cu ft of additional secure storage »» Fits all Teryx Models »» 46” w (42 ½” between the bed rails) x 24” l (front-back) x 17 ¼” h »» Dimensions are the same as the 1478 Rhino Cooler Truck, please see page 32 for specifics »» Features a weather resistant storage compartment with lid & two cup holders. »» Easy installation – mounts with only two fasteners »» Fits models 2009 & earlier »» Dimensions: 20” x 12” x 11.5, 6 lbs. 1490 ........................................... MSRP - $114.99 1489 ............................................ MSRP - $459.99 POLARIS RZR® RZR COOLER TRUNK RANGER CROSSOVER TOOL BOX »» Constructed of heavy duty, Rotomolded, & uv-stabilized LLDPE (linear low-density polyethylene) »» Provides weather resistant storage for your valuable tools & gear »» Lockable gull wing doors provide shallow storage »» Main hinged lids can be easily accessed from either side of your utility bed »» Scissors-type locking strut hold lids open for convenient access »» Attachment plates & (4) KXP plungers included »» Bed Dimensions: 43.75” min x 54” max 2690 Ranger Mid Size 2010-current ..... MSRP - $344.99 2691 Ranger Full Size 2005-current ..... MSRP - $344.99 »» Constructed of heavy duty, Rotomolded, & uv-stabilized LLDPE (linear low-density polyethylene) with foam insulated body »» Unique design allows for convenient storage, separating ice & beverages from your dry goods »» 2 large wet/dry storage areas with drain plugs »» Provides 1.0 cu ft of storage in each area »» Center wet/dry storage area with removable lid, storage tray, & drain plug »» Center area provides .4 cu ft of additional secure storage »» Fits standard models 2010 & older (not RZR-S, XP or 570) »» Will fit 2011 and newer if the rail or skirting is removed (NOT the XP or 570) »» 46” w x 21 ½” w (front-back) x 16 ½” h 2004 ............................................................................. MSRP - $459.99 28 28 29 29 BAS KET R A C K S UTV/ATV STEREOS CONVERTIBLE REAR DROP RACK »» 3 racks for the price of 1 »» Convertible welded basket can be used with the rear rack extension in either the dropped or raised position »» Can use it separately for contained storage on your ATV’s front rack. »» Designed to fit tubular steel ATV racks »» The welded, expanded mesh basket easily transports up to three 5 gallon buckets, tools, & more! »» Constructed of 1 ½ “ diameter tubing for perimeter support »» Universal fit design »» 1 ¼” space before drop allows fitment to machines with vertical rear rack loops »» Welded basket dimensions: 38” l x 13” w x 7 ½” h »» Total assembled dimensions: 40 ½” x 27 ¼” x 10”, 28 lbs. »» NOT recommended with Polaris ATV’s due to having to drill into composite rack UNIVERSAL UTV STEREO WITH DUAL SPEAKER »» Universal UTV mount stereo console with dual speaker tower »» Weather resistant & durable design »» Fits tubing 1 3/4” x 1 7/8” diameter Stereo Features: »» Jensen JMS2212 Marine Grade Waterproof AM/FM/USB/iPod/ iPhone ready »» 200 Watts (50w x 4) »» Compact “black box” design »» USB input supports MP3 & WMA digital music formats »» Full iPod/iPhone control »» NOAA Weather band »» Sirius Satellite ready (separate software is required) »» Zero memory current draw »» Low Battery Warning »» Wired Remote capable (JWR200) »» Positive, multiple line LCD display for better viewing in all conditions »» Dimensions 5 1/8” x 3 3/4” Speaker Features: »» Two Jensen 6.0”/100 Watt Marine Grade Speakers »» Mounting Brackets & Hardware »» 10.0’ Long Pre-Wired Lead **Extra speakers sold separately 3500 ............................................................ MSRP - $689.99 UTV DUAL SPEAKER »» Two Jensen 6.0”/100 Watt Marine Grade Speakers in stylish housing »» Mounting Brackets & Hardware »» 10.0’ Long Pre-Wired Lead »» Clamp fits 1 3/4” x 1 7/8” diameter tubing »» Standard with Kolpin® 3500 Universal Stereo package »» Dimensions: 18” l x 11.5” w x 7” h 3505 ..................................................... MSRP - $299.99 UTV SPEAKER CUBE Each speaker has: »» One Jensen 6.0”/100 Watt Marine Grade Speaker »» Mounting Brackets & Hardware »» 10.0’ Long Pre-Wired Lead »» Clamp fits 1 3/4” x 1 7/8” diameter tubing »» Sold as a pair »» Dimensions: 9” l x 11.5” w x 7” h 53350 ............................................. MSRP - $172.49 FLAT BASKET »» »» »» »» »» »» »» »» »» 1 1/2” steel tubing for perimeter support Bolt together design allows for standard UPS shipping Powder coated matte black finish Welded expanded metal mesh to contain small items Mounts to front or rear of ATV Designed to fit tubular steel ATV racks Flat design increases rack space Built-in tie down points 1 ¼” space at 16” allows fitment to machines with vertical rack loops »» Assembled dimensions: 40” l x 33” w x 6” h »» NOT recommended with Polaris ATV’s due to having to drill into composite rack 53400 ....................................... MSRP - $183.99 FRONT GEAR BASKET »» Easily add extra front or rear storage to your ATV »» Transport up to three 5 gallon buckets, tools, & more! »» One-piece, welded expanded metal design can handle any task & any terrain. »» Universal fit to any front or rear tubular rack. »» Perfect for use on the trail, farm, ice fishing, or just about anywhere! »» Designed to fit tubular steel ATV racks »» Dimensions are 38” l x 13” w x 7 ½” h, weight 16 lbs. »» NOT recommended with Polaris ATV’s due to having to drill into composite rack 3510 Pair .......................... MSRP - $299.99 ATV FRONT STEREO BOX »» »» »» »» Heavy duty, Rotomolded, construction 1.5 cu ft of weather-resistant storage Clear polycarbonate windscreen for protection Two braided stainless-steel lanyards that hold the dry storage compartment open for easy access »» Mounts to most tubular or composite racks using four U-bolts & sealing washers Face Plate Features: »» Jensen MSR 2010 weatherproof, wired remote with display »» Single line dot matrix display with blue backlight »» Selectable US/Euro frequency tuner »» Sirius Ready (requires additional software) »» UV resistant front panel »» Corrosion resistant 4435 ....................................... MSRP - $689.99 30 30 53360 ................................................ MSRP - $114.99 REAR DROP RACK »» »» »» »» »» »» »» »» »» »» Black powder coated steel construction offers the strength of traditional metal baskets Drop basket includes fold down tailgate & cable supports Inside drop area dimensions are 12” x 37 ½” with an 8” drop 1 1/4” space 16” before drop allows fitment on machines with vertical rear rack loops Fits three 5 gal buckets with the tailgate closed Perfect for use on the farm, ice fishing, or just about anywhere! Bolt together design allows for standard UPS shipping Designed to fit tubular steel ATV racks NOT recommended with Polaris ATV’s due to having to drill into composite rack Dimensions: 43” x 31” x 10”, 51lbs. 53300 ................................................. MSRP - $229.99 31 31 UT V WI ND S HI ELD S UTV ROOFS UTV ROOF »» Rotomolded plastic, foam-filled construction »» Mounting Hardware included »» Sport Roofs have molded in speaker cavity & mounting bases for Kolpin® Overhead Stereo Consoles »» Roofs are trailerable »» Made in the USA 1419 1495 1496 1497 2002 1496 - Teryx Sport Roof Rhino Slim Line Roof .......................... MSRP - $319.99 Rhino Sport Roof ................................ MSRP - $287.49 Teryx Sport Roof ................................. MSRP - $287.49 Arctic Cat Wildcat Roof ....................... MSRP - $209.99 RZR Sport Roof .................................. MSRP - $279.99 EUW N CT PROD FULL-FIXED WINDSHIELDS »» Windshield is cut with superior CNC 5-Axis Router... All edges are super-smooth »» Extremely durable custom nylon injectedclamps »» All hardware (nuts & bolts) are stainless steel with black-coated finish.. No Rust! »» Easy to install... Do drilling required »» Comes complete with all mounting hardware & detailed instructions »» Compatible with most aftermarket roofs »» GP (General Purpose) .236” Thick AbrasiveResistant Polycarbonate, but does NOT have scratch resistant finish. (Good) »» HC (Hard Coated) .236” Thick Abrasive-Resistant Polycarbonate with scratch resistant finish (Best) POLARIS RANGER UTV ROOF ® »» Overlapping, 3-piece design offers stability & easy mounting to your Polaris Ranger® »» Easy installation (requires drilling of the roof) »» All mounting hardware included »» Provides excellent sun shade & rain cover »» Roofs are 4” narrower in the front than the rear »» Made in the USA »» Does NOT fit 2013 Ranger XP 900 4440 Ranger Roof (2009-current) .............. MSRP - $249.99 4441 Ranger Roof (up to 2008) ................. MSRP - $287.49 UNIVERSAL UTV ROOF EUW N CT PROD KOLPIN PRO SERIES ROOF »» Constructed of heavy duty, rotomolded & UV-stabilzed LLDPE (linear low-density polyethylene) »» Custom fit, model specific single wall construction »» Compatible with Kolpin windshield offering »» All mounting hardware included »» Made in the USA 4452 4453 4454 4455 4456 32 32 Polaris XP900 ........................ MSRP Polaris RZR1000 .................... MSRP Honda Pioneer ....................... MSRP Yamaha Viking ....................... MSRP Can-Am Maverick .................... MSRP - $229.99 $229.99 $229.99 $241.49 $241.49 4450 - Universal Roof Medium »» Overlapping, 3-piece design offers stability & easy mounting to fit the most popular brands of utility vehicles »» Easy installation requires drilling of the roof »» All mounting hardware included »» Provides excellent sun shade & rain cover »» Roofs are 4” narrower in front than the rear »» Does not fit any crew cab models! 2711 2712 2705 2706 2708 2709 2703 2704 2722 2723 2716 2717 2714 2715 2625 2626 2628 2629 2739 2740 2719 2720 Arctic Cat Wild Cat HC Arctic Cat Wild Cat GP Can Am Commander HC Can Am Commander GP Can Am Maverick HC Can Am Maverick GP Honda Big Red HC Honda Big Red GP Honda Pioneer HC Honda Pioneer GP John Deere RSX850i HC John Deere RSX850i GP Kawasaki Teryx HC Kawasaki Teryx GP Polaris Ranger XP900 (2013) HC Polaris Ranger XP900 (2013) GP Polaris Ranger XP900 GP Polaris Ranger XP900 HC Polaris RZR1000 HC Polaris RZR1000 GP Yamaha Viking HC Yamaha Viking GP MSRP MSRP MSRP MSRP MSRP MSRP MSRP MSRP MSRP MSRP MSRP MSRP MSRP MSRP MSRP MSRP MSRP MSRP MSRP MSRP MSRP MSRP - $459.99 $339.99 $459.99 $339.99 $459.99 $339.99 $459.99 $339.99 $449.95 $324.95 $459.99 $339.99 $459.99 $339.99 $459.99 $339.99 $339.99 $459.99 $329.99 $249.99 $459.99 $339.99 2008 - Polaris RZR HALF-FIXED WINDSHIELDS »» »» »» »» »» »» Unique half-fixed design 1/4” abrasive-resistant GE Lexan MR10 Extremely durable - injection molded c-clamps Black coated finish hardware Easy to install Lip on upper shield deflects air over operator and passenger »» Trailerable »» GP (General Purpose Polyvarbonate) does NOT have scratch resistant finish 2451 2461 2713 2707 2710 2718 2901 2008 2627 2633 2741 »» Adjustable side width - 49”- 55” front, 53”- 59” rear »» Fits most machines including Rhino, Teryx, 2009-up Ranger 400/500/800 »» Front to Back Dimension: 36” (outside) 32” (inside) »» Adjustable side width - 54”- 60” front, 58”- 64” rear »» Fits larger UTV’s including 2008-earlier Ranger »» Front to Back Dimension: 36” (outside) 32” (inside) 1456 - Kawasaki Teryx PRODU W NE CT PRODU W NE CT PRODU W NE CT PRODU W NE CT PRODU W NE CT PRODU W NE CT PRODU $319.99 $269.99 $159.99 $159.99 $159.99 $159.99 $269.99 $159.99 $159.99 $159.99 $159.99 Convenient half-folding design 1/4” abrasive-resistant GE Lexan MR10 Injection-molded clamps & hinges Black coated finish hardware Easy to install Lip on upper shield deflects air over operator & passenger Trailerable in up position 2456 2301 1456 1463 1461 2600 2610 2632 4451 Universal Roof X-Large ................................. MSRP - $287.49 NE W CT HALF-FOLDING WINDSHIELDS »» »» »» »» »» »» »» 4450 Universal Roof Large ................................. MSRP - $249.99 Arctic Cat Prowler MSRP Arctic Cat Wildcat MSRP Arctic Cat Wild Cat GP MSRP Can Am Commander GP MSRP Can Am Maverick GP MSRP John Deere RSX850i GP MSRP John Deere 625/825 MSRP Polaris RZR (shown) MSRP Polaris Ranger XP900 (2013) GP MSRP Polaris Ranger XP900 GP MSRP Polaris RZR100 GP MSRP - Arctic Cat Prowler (Round Tubes) Honda Big Red Kawasaki Teryx (2008-2009) Kawasaki Teryx-4 Teryx (2010-current) Polaris Ranger Full Size (2009-current) Polaris Ranger (2005-2009) Polaris Ranger Mid Size MSRP - $349.99 MSRP - $369.99 MSRP - $299.99 MSRP - $299.99 MSRP - $299.99 MSRP - $349.99 MSRP - $369.99 MSRP - $299.99 33 33 UT V WI ND S HI ELD S REAR SHIELD / BACK PANEL COMBOS* »» Provides an effective barrier to keep debris from entering the cab »» 1/8” FMR GE Lexan rear shield »» 3/16” high-density polyethylene lower panel construction on models Extremely durable injection molded clamps »» All stainless steel, black coated finish hardware »» Easy installation »» GP (General Purpose Polycarbonate) does NOT have scratch resistant finish * Some models do not have separate back panel FULL-VENTED WINDSHIELDS 1492 - Kawasaki Teryx FULL-TILTING WINDSHIELDS »» Versatile three-position tilt mechanism permits airflow into the driver compartment if desired »» Opens 3” or 5 1/2” »» 1/4” abrasive-resistant GE Lexan MR10 »» Extremely durable injection molded clamps »» All stainless steel, black coated finish hardware »» Easy installation »» Trailerable in closed position »» **NOTE: Open position is for low-speed air flow only!! »» Please see application chart on online 2450 2455 2460 3000 3005 2300 2737 2903 2510 1460 1462 1492 2630 2601 2611 2621 2623 2010 2738 2736 Arctic Cat Prowler Arctic Cat Prowler (Round Tubes) Arctic Cat Wildcat Can-Am Commander Can Am Maverick Honda Big Red Honda Pioneer John Deere XUV550 Kawasaki Mule 600/610 Kawasaki Teryx (2010-current) Kawasaki Teryx-4 Kawasaki Teryx (2008-2009) (Shown) Polaris Ranger Mid Size (2010-current) Polaris Ranger XP (2009 ONLY) Polaris Ranger (2005-08)(Crew only 2009) Polaris Ranger XP 800 (2010-current) Polaris Ranger XP 900 Polaris RZR Polaris RZR1000 Yamaha Viking W NE CT PRODU W NE CT PRODU W NE CT PRODU W NE CT PRODU W NE CT PRODU W NE CT PRODU MSRP - $529.99 MSRP - $529.99 MSRP - $449.99 MSRP - $499.99 MSRP - $499.99 MSRP - $549.99 MSRP - $529.99 MSRP - $449.99 MSRP - $549.99 MSRP - $429.99 MSRP - $429.99 MSRP - $429.99 MSRP - $499.99 MSRP - $549.99 MSRP - $649.99 MSRP - $549.99 MSRP - $518.26 MSRP - $369.99 MSRP - $369.99 MSRP - $499.99 »» »» »» »» »» »» »» »» Inexpensive windshield with expensive features! Not only protects - vents provide additional airflow 1/4” abrasive-resistant GE Lexan MR10 Extremely durable injection molded clamps Black coated finish hardware Easy to install - Easy operation Fits with most roofs Trailerable 2007 Polaris RZR MSRP - $269.99 2624 2721 2724 2725 2726 2727 2728 2729 2730 2731 2732 2733 2734 2735 2742 Polaris Ranger XP900 MSRP - $279.25 Yamaha Viking GP MSRP - $213.99 Honda Pioneer GP MSRP - $213.99 Kawasaki Teryx GP MSRP - $213.99 Polaris RZR 570/800/S (09,10,12-current) GP MSRP - $181.89 Polaris RZR 900 (2012-current) GP MSRP - $181.89 Honda Big Red GP MSRP - $267.49 Polaris Ranger XP 2009 GP MSRP - $213.99 Polaris Ranger (2005-2008) GP MSRP - $213.99 Polaris Ranger XP (2010-current) GP MSRP - $213.99 Polaris Ranger Midsize GP MSRP - $181.89 John Deere 625i/825i/HPX GP MSRP - $267.49 John Deere XUV550 GP MSRP - $181.89 Can Am Commander GP MSRP - $267.49 Polaris RZR1000 GP MSRP - $181.89 W NE CT PRODU W NE CT PRODU W NE CT PRODU W NE CT PRODU W NE CT PRODU W NE CT PRODU W NE CT PRODU W NE CT PRODU W NE CT PRODU W NE CT PRODU W NE CT PRODU W NE CT PRODU W NE CT PRODU W NE CT PRODU FULL WINDSHIELDS (HINGED) 1449 Yamaha Rhino (shown) MSRP - $429.99 »» 60/40 Full Folding - upper folds down military style »» Trailerable in up position 2500 Kawasaki Mule 4000/4010 2900 John Deere HPX / Gator 625 / 825 MSRP - $449.99 MSRP - $479.99 »» New Design - 1/4” hard coated Lexan with 5 hinges »» Full Windshield - cannot be opened when riding »» Cowl section of windshield flips up for under hood access only POLARIS® RZR YOUTH 170 COMBO »» Provide extra protection & enhance the look of your Youth RZR 170! »» Includes front windshield, rear windshield & a roof! »» Material used for the front & rear windshield 1/8” abrasive resistant polycarbonate »» Roof is HMW haircell polyethylene, 1/8” thick »» A must for additional safety!! »» Easy installation 34 2100 ........................................................... MSRP - $319.99 34 Polaris RZR Youth 170 Roof & Front/Rear Windshield Combo 35 35 ACCE SS OR I ES EW N CT PRODU CARGO SPYDER Secure your gear with this completely adjustable shock cord storage system. The adjustable design easily accommodates various cargo sizes & shapes, providing a secure fit. »» Ideal for ATV, scooter, motorcycle & other vehicle use »» Shock cord diameter .28 in (7 mm) »» Shock cord length 27.6 in (70 cm) »» By diagonal shock cord length 49.2 in (125 cm) 95175 .................................................. MSRP - $17.24 ATV BACKREST »» Adds back support to your ATV »» Easy-to-install on ATV rear tubular racks using included U-Bolts and turn knobs »» Three position angle adjustment »» 2” thick cushioned back covered with high-density water resistant 600D nylon »» Back pocket for storage 91881 .................................. MSRP - $68.99 CROSSOVER SPORT GLASSES »» Polycarbonate lenses exceed ANSI Z87.1 standards & provide impact resistance from trail debris »» Fitted foam helps to keep out dust & debris »» Superior peripheral vision vs traditional goggles »» Removable/Adjustable goggle strap »» Gray, anti-Fog treated lenses designed for bright outdoor conditions »» Indoor/Outdoor, anti-Fog treated lenses designed for moving between indoor & outdoor lighting »» Ideal for: ATV/UTV, Shooting/Hunting, General Safety, Outdoors LED KWIK LIGHT »» Great for lighting dark or compact spaces »» Unlimited uses include storage boxes, truck boxes, tool boxes, car trunks, cabinets & more »» Push button operation »» Adhesive back for placement »» (3) white LED’s »» Batteries Included (AAA) I/O Lens 97900 ........................................ MSRP - $9.19 96010 I/O Lens .................................... MSRP - $22.99 96020 Gray Lens ..................................MSRP - $22.99 EUW N CT PROD Gray Lens TRAILTEC RACK PAD Black Realtree® All Purpose™ 36 36 »» »» »» »» »» »» »» »» »» 600 x 600D poly/pvc fabric (7) Velcro straps for easy attachment to ATV racks or composite racks 3” open cell foam for riding comfort 1/2” closed cell foam on base for shock absorption Great pad for dogs, sporting events, fishing boats, etc. Reduces shock & discomfort from ATV racks Easily folds in half for shipping/storage or to double the cushioning effect Available in Black or Realtree ® AP™ Dimensions: 36” l x 15” w x 3” h 91880 Black .................................................................. MSRP - $57.49 91885 Realtree® AP™ ...................................................... MSRP - $68.99 ATV/UTV TOOL KIT FIRE EXTINGUISHER BRACKET »» Nylon web adjustable straps with hook and loop fastening for securing easily on your UTV »» Fits all 1.25-2” roll bars »» Heavy-duty bracket »» Holds most household or shop fire extinguishers »» Fire extinguisher not included »» Fire extinguisher is required to be carried on UTV’s in some states 26600 ............. MSRP - $21.26 »» »» »» »» Easy to carry for Trailside repairs Compact durable carry case Metric tools 18 Piece Kit »» Fabric Case with Zipper »» 8” Adjustable Wrench »» 14 mm Combination Wrenches »» 5” Locking Pliers »» Spark Plug Socket (13/16” & 5/8”) »» Spark Plug Handle »» Multi Function Screw Driver »» Electrical Tape »» 3,4,5 & 6mm Hex Key Wrench »» Nylon Zip Tie »» Square, Cotton Weave Rag »» Air Pressure Gauge 89515 ................................ MSRP - $28.74 37 37 ACCE SS OR I ES TIRE REPAIR KIT FLAT PACK Patent Pending »» »» »» »» »» Everything you need to repair & inflate multiple ATV tires »» Packed conveniently in our handy storage pouch Includes all of the tools a rider will need to fix up to 10 flats Tools are secured inside a handy, easy-to-use pump Easily straps to ATV racks or stores inside gear box Dimensions: 9 1/2”l x 3” Diameter Includes: »» (3) CO2 cartridges (1 to 2 cartridges will fill most ATV tires) »» Regulator/adapter tool »» (5) 4” tire seals »» Tire roughing tool plus installation tool 89500 ......................................................... MSRP - $40.24 89510 .................... MSRP - $28.74 THROTTLE MASTER »» »» »» »» »» »» »» Eliminate fatigued or sore thumbs More precise throttle control Easy universal bolt on design Unique design allows blade length to be adjusted Blade angle can be bent for individual preference Available in standard or heated version Heated version features off, hi-low temperature settings HEATED GRIP CYCLE COUNTRY »» Keep your hands warm during those cold winter activities - plowing, hunting, etc. »» Handlebar mounted dial switch »» Comfortable rubber grips »» Plug & Play connectors 50-0360 ............. MSRP - $57.49 98005 Standard ............... MSRP - $22.99 98010 Heated .................. MSRP - $45.99 UTV CAB HEATER SYSTEM »» Big heat in a Small Size »» Utilizes engine coolant as heat source, includes a coolant diverter valve for summer use »» Low fan amp draw means long hours of comfort without draining your battery »» Integrated, variable speed switch allows the operator to set the comfort level »» One installation kit fits most UTV’s »» Mounting bracket rotates 180° from top to bottom for easy mounting to floor, firewall, or under dash »» 4000BTU/hour HEATED GRIP - KOLPIN »» Protect your hands from the cold »» 4 level temperature settings »» Fits any 7/8” standard handlebars on ATV or snowmobiles »» Easy to install with pre-wired electrical connectors »» Handlebar or tank mounted electronic control unit with LED display »» To assist in installation use contact cleaner or a type of lubrication Specifications: »» CFM : 0 to 200 »» Amp Draw : 0 to 2 »» Size (Inches) : 5.5 x 5.5 x 9.5 »» Weight: 3.5 lbs 96155 .............................. MSRP - $68.99 98600 ............... MSRP - $689.99 ATV COVER »» »» »» »» »» »» Mossy Oak® New Breakup™ GEARTECTOR® MITTS (PAIR) Light duty storage cover Reinforced tie-down grommets Available in Black only Standard size fits most ATV’s 400cc & smaller Standard Dimensions: 85” l x 35” w x 32” h XXL Dimensions: 95” l x 50” w x 50” h »» Extra large, reinforced opening for easy access to handlebars »» Plush lining to keep your hands warm »» Simple locking draw cord to securely seal to handlebars »» Durable Rhino plate front panel for abrasion resistance »» Roomy interior allows complete access to all controls *** Special note: cover must be removed for trailering 92180 Mossy Oak® Breakup™ ............. MSRP - $36.79 92185 Black ...................................... MSRP - $30.46 95110 Standard .......................................... MSRP - $51.74 95104 XXL ................................................. MSRP - $57.49 38 38 Black 39 39 ACCE SS OR I ES ATV MIRROR GEL-TECH™ SEAT COVER »» Easily mount to handle bars or front tubular racks (hardware included) »» Fully adjustable 4” mirror »» Kwik clip allows for easy positioning & removal »» Safely view who is behind you »» Accommodates 5/8” to 1” diameter tubing »» Can be mounted on the left or right hand side of the rack EUW N CT PR OD UTV REAR MIRROR »» Convex mirror provides wide viewing range and image stabilization »» Shatter-proof tempered glass »» High Impact ABS Housing »» Ball Socket Joint for unlimited viewing angles »» Mirror Dimensions: 4.5” x 8” »» Includes 1.75” OD Clamp to fit most major brand UTV’s »» Polaris Ranger (Non-900XP) »» Polaris RZR »» Yamaha Rhino »» Kawasaki Mule 600’s »» Arctic Cat Prowler (Round Tube) »» John Deere Gator (All) 97200 ............................................... MSRP - $28.74 HAND GUARD WITH MIRROR »» Constructed of durable molded polyurethane with Kolpin’s trademark Rhino Rib ® reinforcement for added protection »» Features round, 3” (76.2mm) fish-eye rearview mirror »» Universal fit design mounts directly to most ATV handlebars »» Does NOT fit Can-Am ATV’s with hand guards or Kawasaki Brute Force Models with plastic handlebar fascia »» Includes (2) hand guards with mirror & hardware »» Fits most ATV’s »» Gel padding & ergonomic design provides maximum cushioning & temperature control for exceptional riding comfort »» Easy to install with Velcro straps »» Dimensions: 14” front, 21” back, 30” length 91855 Black .................................. MSRP - $51.74 91865 Mossy Oak® Breakup™ .......... MSRP - $63.24 98310 ................ MSRP - $22.99 SEAT COVER 97300 ........................................... MSRP - $51.74 EUW N CT PROD »» Designed to fit small & mid-size ATV’s up to 400cc »» Rugged 600D nylon for long wear & protection of your ATV seat »» Available in Black or Mossy Oak® Breakup™ »» Dimensions: 13” front, 15 1/2” back, 26” length »» Does NOT work on Sportsman 500 93645 Black ........................................ MSRP - $20.69 93640 Mossy Oak® Breakup™................. MSRP - $28.74 UTV SIDE MIRROR UTV REAR/SIDE MIRROR »» Rear and/or side mounting options »» Easy to adjust with the quick-pivot design »» Clamp design allows overhead mounting in your UTV with a roof installed »» The wide angle, convex lens provides high visibility »» Over-molded grips help to reduce vibration »» Accommodates up to 1 3/4” tubing »» Dimensions: 10” x 3” 98300 ..................................... MSRP - $45.99 »» »» »» »» »» »» »» »» Package includes a set of two mirrors (Passenger and driver side) Convex mirror provides wide viewing range and image stabilization Shatter-proof tempered glass High Impact ABS Housing Ball Socket Joint for unlimited viewing angles Break away feature Mirror Dimensions: 4.125” x 7.75” Includes 1.75” OD Clamp to fit most major brand UTV’s »» Polaris Ranger (Non-900XP) »» Polaris RZR »» Yamaha Rhino »» Kawasaki Mule 600’s »» Arctic Cat Prowler (Round Tube) »» John Deere Gator (All) 98315 (Pair)........................... MSRP - $51.74 40 40 EUW N CT PR OD PADDED SEAT COVER »» Padded ergonomic design provide maximum comfort »» For optimal performance and rider safety, a layer of Ultra Grip™ material prevents slippage in a wet or damp condition »» Stretchable fit design to accommodate most ATV models »» Durable nylon web straps are easy to install, ensuring a secure fit while quick-release buckles facilitate effortless seat cover removal »» Dimensions: 14” front, 21” back, 30” length 41 91895 Black ............................... MSRP - $39.99 41 PLOW SYSTEMS DRIFTER PLOW X-FACTOR™ “PLOW IN A BOX” The Kolpin® X-Factor™ Plow System comes with everything you need to start plowing with your ATV today! Easy to assemble & install on your ATV, this durable ATV plow will have you pushing Mother Nature around. »» »» »» »» »» »» »» »» »» »» »» »» »» Industry first complete bolt together plow system in a box! Light duty, 3-piece steel & tube steel frame that will withstand years of plowing use Easy on / easy off push tube X-Factor™ Plow System comes complete with everything you need to start plowing today Forward ATV Plow Mount fits most ATV frames from 2002-current models Rugged 52” 14 gauge steel blade with double layer of steel at center X Strong square tubed push frame 5 position blade angle Dual trip springs & height adjustable HD skid shoes protect plow & ATV Double sided steel wear bar that can be turned over to double the life Easy to assemble One year limited warranty ****REQUIRES Winch, Manual or Electric Lift system (NOT INCLUDED) »» ATV Drifter Plow System comes complete with blade, heavy-duty push tube and mount »» Design features Patent Pending Forward Plow Mount (US Patent 8,505,973) and fits most ATV frames from 2002-current »» Rugged 52” Poly Blade with Patented RibCore construction (US Patent 7,685,748 B1) »» Easy on / easy off push tube attachment »» Strong square push tube »» 5 position blade angle adjustment »» Double sided steel wear bar that can be turned over to double the life »» Easy to assemble »» One year limited warranty »» NOT recommended for Can-Am models. See application chart for model specific fitments »» ****REQUIRES Winch, Manual or Electric Lift system (NOT INCLUDED) EW N CT PRODU 10-0550 ................................................................................... MSRP - $528.99 10-0520 ................................................................................................ MSRP - $459.99 42 42 43 43 P L OW A C C ES S OR I ES MANUAL QUICK LIFT »» Manually Raise & Lower any ATV Plow System easily from the Driver’s Seat »» Attaches to front rack with the included EZ Mount system »» Ratcheting handle allows user to lock blade in any of four positions »» Operates with minimal lifting effort »» Works with most ATV plow systems 15-0030 ............................... MSRP - $166.74 THROTTLE MASTER »» »» »» »» »» »» »» Eliminate fatigued or sore thumbs More precise throttle control Easy universal bolt on design Unique design allows blade length to be adjusted Blade angle can be bent for individual preference Available in standard or heated version Heated version features off, hi-low temperature settings HEATED GRIP CYCLE COUNTRY »» Keep your hands warm during those cold winter activities - plowing, hunting, etc. »» Handlebar mounted dial switch »» Comfortable rubber grips »» Plug & Play connectors 50-0360 ............. MSRP - $57.49 98005 Standard ............... MSRP - $22.99 98010 Heated .................. MSRP - $45.99 HEATED GRIP - KOLPIN PLOW MARKER KIT »» »» »» »» BLADE FLAP Increases visibility of plow edges for added safety Easily bolts to sides of plow blades Steel markers have 45° bend base Poly markers have 90° bend base »» Universal Rubber Blade Flap fits plow blades with widths 42” - 72” »» Keeps snow from flying into your face »» Available in any size from 42” to 72” 10-0140 Pair (Steel) ...... MSRP - $13.99 10-0145 Pair (Poly) ...... MSRP - $13.99 »» Protect your hands from the cold »» 4 level temperature settings »» Fits any 7/8” standard handlebars on ATV or snowmobiles »» Easy to install with pre-wired electrical connectors »» Handlebar or tank mounted electronic control unit with LED display »» To assist in installation use contact cleaner or a type of lubrication 96155 .............................. MSRP - $68.99 10-0190 ...................... MSRP - $41.39 POWER MAX LED BLADE LIGHT Mossy Oak® New Breakup™ GEARTECTOR® MITTS (PAIR) »» »» »» »» »» 36 ultra bright LEDs provide more light on the plowing surface LED light strip enclosed in weather proof enclosure 10’ cord with 12V adapter supplies power from in-dash receptacle Low amp draw allows extended use with minimal battery draw Adjustable for best light direction & swivels 180 degrees to face vehicle »» Removable for use as trouble light when needed »» Mounts to steel blades, poly blades, or on ATV racks »» Also fits most other brands of ATV/Side by Side blades »» Extra large, reinforced opening for easy access to handlebars »» Plush lining to keep your hands warm »» Simple locking draw cord to securely seal to handlebars »» Durable Rhino plate front panel for abrasion resistance »» Roomy interior allows complete access to all controls 92180 Mossy Oak® Breakup™ ............. MSRP - $36.79 92185 Black ...................................... MSRP - $30.46 Black 44 44 50-0550 .................................................................... MSRP - $114.99 50-0560 (Poly BLade Bracket) ................................... MSRP - $ 24.99 45 45 DI RT WOR K S Your complete source of ATV & UTV Implements - EASY AS 1 - 2 - 3 !!! HD 3-POINT HITCH SYSTEM »» Category “0” 3-point hitch with a 20” tool bar width & 5/8” diameter pins »» Heavy-duty 1 1/2” square tubing mainframe for use on ATV’s or UTV’s »» Fits any 2” automotive style receiver hitch or if you don’t have one … check out our complete line of heavy duty hitches »» Easy change over from work to play in just minutes with quick, easy installation & adjustments without the need for tools. »» Convenient rocker switch can be mounted to your handle bars »» 12v electric actuator lift system with 20 amp maximum current draw »» 250 lb. lift capacity at the tool bar with 300 lbs down pressure capacity »» 15” vertical lift at the tool bar »» Fully adjustable lift arms & top link »» Additional frame support kit may be required, please check out our suspension locks & frame support kits »» Requires Accessory Tool Bar (sold separately) WHS03HD ......................................................... MSRP - $804.99 ACCESSORY TOOL BAR »» »» »» »» »» »» 48” Tool Bar for use with ATV’s or UTV’s 60” Tool Bar for use with UTV’s Category “0”, 5/8” hitch pins with 20” spacing Heavy-duty, black powder coated tool bar Allows a quick change from one implement to another Each of our Dirtworks ® implements are designed to slide into, or plug into the tool bar for use with the 3-Point Hitch »» Required to use with any DirtWorks ® Implements Dirtworks® by Kolpin® Kolpin® provides the largest assortment of the quality tools you need to put your ATV or UTV to work! Whether you’re establishing a wildlife food plot or just maintaining your property, Kolpin ® has the right accessory for the job. ATB48 48” WIDTH (ATV) ............................ MSRP - $126.49 ATB60 60” WIDTH(UTV) ............................ MSRP - $149.49 Our complete line of rugged, heavy duty Category “0” agricultural implements includes disc plow, cultivator, landscape rake, chisel plow, rear blades/scrapers & a growing line of hitches. Simply the TOUGHEST implements available for ATV’s & UTV’s on the market today! 3 2 1 ATV 3-POINT HITCH SYSTEM WITH 48” TOOL BAR »» Same features our WHS03HD 3-point, but includes 48” Tool Bar in one package! WHS03HDTB ......................................................... MSRP - $919.99 Step 1 46 46 Choose your 2” Receiver Hitch & Suspension lockout (pg. 51-53) Step 2 - Add the 3-point hitch & tool bar (pg. 47) Step 3 - Choose your Implement(s) (pg. 48-50) 47 47 DI RT WOR K S CHISEL PLOW/SCARIFIER LANDSCAPE RAKE »» Clear trails, groom horse corrals, rake the beach or maintain your gravel driveway »» Five position angling provides more customized results »» 21 – 1 5/16” hardened landscape rake tines »» Requires either the 48” or 60” Accessory Tool Bar & 3-Point Hitch System (sold separately) »» 60” width LSR60 .............................................. MSRP - $344.99 »» 2 applications in one – use as a Blade Scarifier OR as a Chisel Plow! »» As a scarifier it is ideal for loosening material for more use »» As a chisel plow, clear away roots, sod & debris for preparation of food plots & other land maintenance tasks. »» Hardened steel teeth loosen hard packed surfaces such as driveways, sand trails, or can be used to cut into hard, solid sod. »» Adjustable blade height for specific ground type & extra clearance during transportation »» (6) ½” heavy-duty, hardened steel plow teeth »» Requires either the 48” or 60” Accessory Tool Bar & 3-Point Hitch System (sold separately) »» ** Helpful Hint: We recommend the use of an additional tool bar for speedy changeover of the Chisel Plow/Scarifier when utilizing other DirtWorks ® implements 86100 ...................................................................... MSRP - $252.99 Can also be used with the Rear Blade attachment CULTIVATOR SET DISC PLOW »» Our best selling implement is also the most versatile - It cuts.. It digs.. It slices.. It dices.. »» Two individual gangs of (4) discs are easy to attach to the DirtWorks ® & the accessory tool bar »» Five adjustable cutting angles to accommodate different soil types & conditions »» Live axle & sealed ball bearing design »» 54” width »» Requires either the 48” or 60” Accessory Tool Bar & 3-Point Hitch System (sold separately) »» Price includes 2 Parts (DP8 - Hardware & DP82 Discs) MUST be ordered together. »» Great implement for the initial preparation of hard packed soil »» Cultivator tines break up compacted ground providing deeper penetration & more aeration when preparing your seed bed. »» Agricultural grade Danish “S” tines feature reversible sweeps »» Includes six each of the “S” tines with 1 1/2” sweeps »» Requires either the 48” or 60” Accessory Tool Bar & 3-Point Hitch System (sold separately) »» ** Helpful Hint: We recommend the use of a separate tool bar for mounting convenience of the cultivator set if you are utilizing other DirtWorks ® implements CT036 ............................................... MSRP - $379.49 DP8 & DP82 ................................... MSRP - $402.49 48 48 49 49 HITCHES/FRAME SUPPORT 48” REAR BLADE SUSPENSION LOCKOUT »» Easy one pin mounting »» Five position angling »» 13” blade height with a replaceable & reversible wear bar for long life »» Requires the 48” Accessory Tool Bar (sold separately) »» Incorporated flange plates allow our popular Box Scraper attachment (sold separately) to be bolted on to quickly convert the blade to a box scraper »» Eliminate rear suspension sag when under load »» Highly recommended for use with the Kolpin® DirtWorks ® 3-Point Hitch System or for any heavy load »» Can be used for pulling a boat, trailer, ice house or even during ATV pulls »» Fits most ATV’s with Independent Rear Suspension »» *** Please review our fit list online for model specifics FRB48 ................................................. MSRP - $287.49 Right side shown only 85210 85200 Part Number Name 85200 Universal IRS 85210 Can Am SLUSA Universal Swingarm Fits Model MSRP Fits most ATV models with Independent Rear Suspension* $68.99 Can Am Outlander & Renegade ATV Models* with trailing arm suspension Fits up to 2011 only $68.99 ATV Models with solid axle rear suspension* $68.99 SLUSA 4” LIGHT DUTY DRAG HARROW »» Attaches quickly to your ATV, UTV or garden tractor to help loosen compacted dirt »» Ideal for leveling dirt/gravel, seeding food plots, prepping for sod, or even dragging ball fields. »» Made from heavy-duty, powder coated steel framing & galvanized mesh »» Light weight for easy handling & storage »» 4’ w X 5‘ l = 20 sq ft ATV 2” IRS RECEIVER 86840 .................................. MSRP - $137.99 85100 85110 Part Number Name 85100 Universal 85110 85145 85185 Fits Model 85190 MSRP Fits most ATV models with Independent Rear Suspension $80.49 Can Am Outlander Can Am ATV Models with trailing arm suspension $91.99 85145 Honda Rancher AT Honda Rancher AT Independent Suspension Models $80.49 85185 Polaris Sportsman 2011 - current Polaris Sportsman New Chassis 400/500/HO/800 $80.49 (**Not for use with our DirtWorks System) 50 50 85190 Polaris Sportsman XP 2009 ONLY Polaris Sportsman XP Models $91.99 85195 Polaris Sportsman XP 2010-2013 Polaris Sportsman XP Models $91.99 (Not Touring Models) 85195 »» 2” IRS Receiver Hitches are frame mounted »» Long lasting powder coat finish for ground engaging & heavy towing capabilities »» Kolpin® hitches are the heaviest duty hitches on the market! »» For off-road use only »» *** Please review our fit list online for model specifics 51 51 HITCHES/FRAME SUPPORT ATV 2” SWINGARM RECEIVER HITCH 85140 MULTI HITCH »» *** Please review our fit list online for model specifics (85610, 85620) BOLT ON 3-WAY HITCH (85630) BOLT ON ATV RECEIVER (85640) »» Unique design enables dual towing capability with the ball mount or pin mount »» Side loops for tie down, tow straps or safety chain attachment »» Durable powder coat finish for long life »» 3/4” hitch ball mounting hole, 5/8” clevis hitch hole »» For off-road use only 85150 »» Heavy duty Class 1 frame mounted 2” receiver hitch »» Long lasting powder coat finish for ground engaging & heavy towing capabilities »» Kolpin® hitches are the heaviest duty hitches on the market! »» 200 lb. max tongue weight »» For off-road use only 3-WAY MULTI HITCH 85155 85160 »» Three easy mounting options; ball (sold separately), clevis & tow hook mount »» Not recommended for use with the Kolpin® Dirtworks ® 3-Point Hitch System »» 3/4” hitch ball mounting hole; 5/8 clevis »» 3” rise »» For off-road use only 85180 Part Number Name Fits Model MSRP 85140 Honda Foreman Fits Honda Foreman 2012-current new chassis with single rear shock $80.49 85150 Honda Foreman Fits most Honda Foreman and Rubicon Models (Twin Shocks)* $80.49 85155 Honda Fits most Honda Rancher Models (Single Shock)* also fits 2012 Rubicon Foreman (Single Shock)* $80.49 85160 Kawasaki (Prairie/Bayou) Fits most Kawasaki non-independent rear suspension ATV Models 2002 & newer* $80.49 85180 Suzuki (Eiger/Vinson) Fits most Suzuki ATV Models with straight axle* $80.49 »» Unique design enables dual towing capability with the ball mount or pin mount »» Heavy-duty 2” receiver mount for additional ball mount inserts »» Reversible for trailer hitch height adjustment »» 3/4” hitch ball mounting hole; 5/8 clevis »» For off-road use only 85610 85620 85630 85640 Part Number Name Fits Model MSRP 85610 3-Way 1 1/4” Multi Hitch Heavy-duty drawbar fits 1 1/4” factory receiver hitches $28.74 85620 3-Way 2” Multi Hitch Heavy-duty drawbar fits 2” factory receiver hitches $28.74 85630 Bolt on 3 Way Hitch (Light Duty) For 3/4” shaft trailer ball (sold separately) $28.74 85640 Bolt on ATV Receiver Hitch (Light Duty) Fits most ATV’s with factory hitch For 3/4” shaft trailer ball (sold separately) $45.99 UTV 2” RECEIVER HITCH All of our Application and fitment charts for Kolpin products can be found online at: 90250 www.kolpinpowersports.com/owners-parts-manuals.html 52 52 Part Number Name 90250 Kawasaki Mule (Rear) Fits Model Kawasaki Mule (Rear) - Fits models 3010/4010 ONLY - does not fit Mule 610 MSRP $172.49 53 53 NOT E S 54 54 40 55 55 41 61 56