Hampton HI400 - Regency Fireplace Products

14
+
HOURS
BURN TIME
Hampton HI400 wood insert in enamel timberline brown finish.
Hampton HI400
Large Hybrid Catalytic Wood Insert
Featuring Eco-Boost™ Technology
EPA
APPROVED
86%
EFFICIENCY
22"
MAX. LOG SIZE
sq.
2,600 ft.
HEATING CAPACITY
70,000
MAX BTU
2.6
cu. ft. FIREBOX
1.8
g/hr. EMISSIONS
One of the largest, most efficient wood burning inserts available in North America
www.regency-fire.com
Style meets technology.
This hybrid wood insert by Hampton completes the look of any room
– with modern technology and traditional design; you get the best of
both worlds – without sacrificing style or efficiency. The HI400 is the next
generation of wood inserts, with the ability to heat homes up to 2600
square feet while meeting strict EPA standards.
A broad heating range
means increased flexibility.
The loading capacity combined with the controllable burn rate of our
Eco-Boost™ technology provides flexibility to heat smaller homes with
less reloading and large homes with the maximum capacity available.
Regency HI400 wood insert in metallic black finish.
Eco-Boost™ Technology
The hybrid catalytic system allows the fuel to burn
at a slower rate, delivering 14 or more hours of
heat* with a single load of wood. Fuel is utilized to
its full potential with only 1.8 g/hr. of emissions and
86.1% efficiency!
Burn Overnight without re-loading
The large firebox measuring 2.6 cubic feet means
you can load up overnight, without worrying about
waking up to a cold house. Providing 14 hours or
more* of consistent, reliable heat - the large firebox
has room for up to a 22" log.
Easy Single-Lever Operation
A simple single-lever air control conveniently
located at the front of the insert can be adjusted
to meet home heat requirements, from a hot burn
to a smoldering glow that keeps the chill away.
Large View Cast Iron Door
The heavy duty cast iron door offers a 250 square
inch viewing area, delivering an excellent view of
the stunning fire. The door opens to 110° making
wood loading easier.
Superior Lifetime Warranty
With over 35 years of wood insert
manufacturing expertise, along with the
most comprehensive warranty in the
industry, the HI400 is guaranteed to deliver a
lifetime of dependable heat.
Standard Features
Optional Features
• Eco-Boost™ Technology
• 2.6 cu. ft. firebox accommodating 22" logs
• Single lever bypass damper
• Single-lever air control
• High performance brick-lined firebox
• Clean glass airwash system
• 250 sq. inch viewing area
• 110° opening door for easy loading
•Quick access leveling bolts
•Rollers for easy installation
•Surround in metallic black or
Enamel timberline brown
•Backing plate in 2 sizes
•Concealed 2 speed blower
•Digital Catalytic
temperature gauge
•Offset flue adapter for
installation flexibility
Technology
Eco-Boost™ combustion technology
Heating capacity**
up to 2,600 sq. ft.
Firebox capacity
2.6 cu. ft.
Maximum wood load
40 lbs***
Burn Time*
14+ hrs
Maximum BTUs*
382,000
Maximum BTUs per hour
70,000 ***
Log size
22 in.
Emissions
1.8 g/hr.
Efficiency
86.1%
Viewing area
250 sq. in.
Loading opening
20 in. W x 10 in. H
Temperature activated blower
(optional)
125 CFM
Firebox construction
Heavy gauge premium steel
Vent
6 in.
Width
Height
Depth
Minimum Fireplace Opening
28-13/16”
21-3/4"
19"
Faceplate Size
41-3/8"
26-1/2"
-
Optional Backing Plate
Width
Height
Standard
44"
29-7/8"
Oversized
48"
33-7/8"
* Length of burn time and BTU output depend upon wood species used, moisture
content of wood, elevation, climate conditions and installation.
** Varies depending on home floor plan, house layout, heat loss of the house and
quality/moisture content of wood.
*** Based on 8,500 BTUs per lb.
How does Eco-Boost™ technology work?
Secondary Air Tube
The secondary air tube, working with the catalyst,
ensures the fuel is burned to its full potential
resulting in low emissions and high heat output.
Catalytic Combustor
Creates consistent heat by slowly re-burning
wood smoke particles that would normally go
up the chimney. Best combustor warranty in the
industry (6 years).
Heavy Duty
Stainless Steel
Flame Shield
Provides better
distribution of gases over
the catalyst and protects
the catalyst from direct
flame exposure.
Bypass Damper
Used to close the
damper & engage the
catalytic combustor.
Air wash System
Keeps the glass clean
and provides an
excellent view of the fire.
High
Performance
Bricks
Single Lever
Air Control
Provides superior
insulation and heat
reflection.
Easily controls the heat
output and intensity of
the fire by adjusting the
amount of air intake.
Blower
Combustion Air
The 2-speed blower
distributes heat
throughout the room.
Blower cassette can be
removed for cleaning.
Air from the room is
drawn in for primary
and secondary
combustion.
Eco-Boost™ Technology
Why Eco-Boost™ Technology?
A Green Solution
that will save you money
Higher Efficiency = Saves you Fuel, Money & Time.
Emissions
Efficiency
$ $ $
$ $ $ $ $
$$
$
Open Fireplace
EPA Non-Catalytic
EPA Eco-Boost™
Open Fireplace
EPA Non-Catalytic
EPA Eco-Boost™
40-80 g/hr
3-7 g/hr
1-2 g/hr
15% efficient
70% efficient
87% efficient
1-2 hr burn time
8-10 hr burn time
14+ hr burn time
Specifications
28 7/8" Dimensions
18 1/2"
Minimum Clearances to Combustible Materials
BUILT FIREPLACE CLEARANCES
Adjacent
Mantel**
Side Wall
Top
combustible materials
when installed
into a masonry
built fiof
replace are(to
listed
below.
Minimum
Clearances
to or factory
(to Side
of Door)
Combustible Materials
Door)
ent
Wall
de
or)
Mantle **
(to Top of Door)
6"
21-5/8"
B
HI400
Top
Facing
(to Top of Door
C
Side
Facing
A
(to Side of Door)
D
14"
7-3/8"
12-3/16"
Minimum
Hearth
B
Extension*
E
Top Facing
(to Top
of Door)
Minimum
Hearth Side
Extension*
F
21-5/8"
US 16"
Canada 18"
8"
9
28 7/8"
18 1/2"
1815/16"
Side Facing
(to Side
of Door)
Minimum
Hearth
Extension*
C
D
E
14"
7-3/8"
US 16"
Canada 18"
Minimum
Hearth Side
Extension*
31/16"
1815/16"
Top
The minimum required clearances to combustible materials when |
installation
installed into a masonry or factory built fireplace are listed below.
F
8"
31/16"
40"
133/8"
Measurements A,B,C,D are from Top/Side of Door
are from Top/Side of Door
40"
" thick.
.
Side and Top facing is a maximum
of 1.5" thick.
the unit is
bottom of
or protecmbustible
e US and
e unit and
* Side hearth extension for Canada
measured from side of appliance.
stible (i.e.,
, etc.) Any
products,
d.The floor
of thermal
esistance)
F
Minimum Hearth Extension for the front
(E) and sides (F) are measured from the
fuel door opening.
TERNATE FLOOR PROTECTION MATERIALS ARE ACCEPTABLE
m) brick
mineral
cification
Step (b):
Calculate R of proposed system.
4" brick of C = 1.25, therefore
Rbrick = 1/C = 1/1.25 = 0.80
1/8" mineral board of k = 0.29, therefore
Rmin.bd. = 1/0.29 x 0.125 = 0.431
Total R = Rbrick + Rmineral board =
0.8 + 0.431 = 1.231.
Step (c):
Compare proposed system R of 1.231 to
specified R of 0.893. Since proposed system
R is greater than required, the system is
acceptable.
40"
26"
** A non-combustible mantel may
be installed at a lower height
if the framing is made of metal
studs covered with a noncombustible board.
Your Regency Dealer Is
be 3/8"
of 0.84.
27 3/4"
* Hearth to have minimum:
R value of 2.13 or greater.
Clearance diagram for Installations
** Max. mantle depth is 10”
(254mm)
DEFINITIONS
Thermal Conductance:
C
=
Btu
(hr)(ft2 )(oF)
=
W
(m2))(K)
Thermal Conductivity:
k = (Btu)(inch) = W
(hr)(ft3)(oF)
(m)(K)
= Btu
(hr)(ft)(oF)
Thermal Resistance:
R
=
(ft2)(hr)(oF)
=
(m2)(K)
211/2"
dimensions
|
7
26"
DIMENSIONS - CAST FACEPLATE
41-3/8"
41-3/8"
1051mm
27 3/4"
40"
26-1/2"
26-1/2"
673mm
installed
made of
mbustible
Side
Minimum Hearth26"
Extension
for the front (E) and sides (F)
are measured from the fuel
door opening.
Cast Iron Faceplate
measured
13.5°
26"
29"
Standard
WidthCI2600 | wood insert
Height
29"
44"
29-7/8"
Oversized
48"
Optional Backing Plate
33-7/8"
These are guidelines only, subject to change without notice. Always refer to the actual product manual that
comes with your unit for specific, current dimensions and clearances.
© 2014 FPI Fireplace Products International Ltd. Regency is a registered or proprietary trademarks of FPI
Fireplace Products International Ltd. All rights reserved. Printed in Canada (09/14)
Part no. 944-419
CI2600/HI400 | wood insert