Dapping Tools - Metalliferous

Dapping Punches Ball Stakes • DAPPiNg ToolS
u
dapping punches (individual sizes)
Precision-made, highly polished dapping punches made from hardened tool steel. Made in Europe.
item no. inch
item no. inch
PE199
PE200
PE201
PE202
7
⁄ 64"
1
⁄ 8"
9
⁄ 64"
5
⁄ 32"
mm
price
item no. inch
2.8
3.2
3.6
4.0
$2.65
$3.50
$3.50
$3.60
PE203
PE204
PE205
PE206
7
⁄ 32"
1
⁄ 4"
9
⁄ 32"
5
⁄ 16"
mm
price
5.6
6.4
7.1
7.9
$4.05
$4.45
$4.45
$5.65
PE207
PE208
PE209
PE210
PE211
PE212
PE213
PE214
PE215
PE216
PE217
dapping punch set
Set of 30 hardened steel highly
polished punches. A laminated
hardwood stand with a clearly
marked hole for each punch
is included. Punch size
diameters from 7⁄ 64" to 2"
(2.8 – 50.8mm).
Made in Europe.
PE228.30 $151.00
mushroom Former sets
Set consists of 2 hardened steel
convex punches and a hardened two-sided steel
die with 2 concave depressions
that correspond to the
punches. Use to form
bowls and shapes.
Includes hardwood stand.
Made in Europe.
PE266.00 2 1⁄ 4" & 2 1⁄ 2" $68.00
PE267.00 2 1⁄ 2" & 2 3 ⁄ 4" $81.00
$98.00
PE269.00 3" & 3 1⁄ 4"
⁄ 8"
13
⁄ 32"
7
⁄ 16"
15
⁄ 32"
1
⁄ 2"
9
⁄ 16"
19
⁄ 32"
5
⁄ 8"
11
⁄ 16"
23
⁄ 32"
3
⁄ 4"
mm
price
item no. inch
9.5
10.3
11.1
11.9
12.7
14.3
15.1
15.9
17.5
18.3
19.1
$5.65
$5.65
$5.75
$5.75
$5.75
$5.75
$5.75
$6.50
$6.50
$6.50
$7.40
PE218
PE219
PE220
PE221
PE222
PE223
PE224
PE225
PE226
PE227
PE229
25
⁄ 32"
13
⁄ 16"
7
⁄ 8"
29
⁄ 32"
31
⁄ 32"
1"
1 1 ⁄ 8"
1 1 ⁄ 4"
1 1⁄ 2"
1 3 ⁄ 4"
2"
mm
price
19.8 $8.20
20.6 $8.20
22.2 $10.80
23.0 $10.90
24.6 $11.65
25.4 $12.40
28.6 $14.90
31.8 $20.50
38.1 $23.40
44.5 $31.50
50.8 $31.50
dapping punch set
Set of 24 highly polished, hardened punches
for shaping metal and/or use
with dapping block.
Punch size diameters
from 7⁄ 64" – 1"
(2.8mm to 25.4mm).
Hardwood stand included.
Made in India.
DB200 $95.00
i.d. punch set
Punches are 1mm
smaller than the corresponding cavity
(inside diameter) of a Pepe 2 1⁄ 2"
dapping block. Punch and die
combinations can be used on
18 ga. (1mm) metal to form
perfect domes and hemispheres.
5 punches: 27.6mm, 30mm, 37.1mm,
43mm and 49.8mm. Includes wooden stand.
Made in Europe.
PE228.05 $81.00
3
dapping punch sets
Punches made of hardened steel with finely polished
ends for chasing and shaping metal in dapping
blocks. Made in India.
Set of 18 ( 7⁄ 64" to 3 ⁄ 4")
DB218 $43.50
Set of 24 ( 7⁄ 64" to 1")
DB224 $58.80
Set of 36 ( 7⁄ 64" to 1")
DB236 $75.00
dapping-cutter set
Precision-hardened
tool steel cutting-punches provide
fabrication and design
versatility. Cut soft, thin metal
(28 ga.) Create surface design
textures. Close bezels.
Concave work surface.
Includes hardwood stand,
22 punches: 7⁄ 64" to 7⁄ 8" diameter
(2.8 – 22.2mm) Made in Europe.
PE250.22 $89.00
timothy miller ball stakes
TMBS5
$115.00
3.6"
ball
dia.
TMBS6
$135.00
Shank: 12"L x 1.5"W
TMBS4
$67.50
3.1"
ball
dia.
Shank: 11"L x 1.4"W
TMBS3
$50.50
2.7"
ball
dia.
Shank: 10"L x 1.25"W
TMBS2
$48.00
2.4"
ball
dia.
Shank: 10"L x 1.25"W
TMBS1
$41.00
1.9"
ball
dia.
Shank: 8"L x 1"W
1.5"
ball
dia.
Shank: 8"L x 1"W
Shank: 7"L x .75"W
Hand forged using the finest carbon steel.
Standard size beveled shanks. Highly polished,
hardened working surfaces.
3.9"
ball
dia
TMBS7
$145.00
Metalliferous
Metals • tools • supplies
111
DaPPing Tools • Dapping Bending Blocks
u
Flat DaPPinG Block
2" DaPPinG Block
Preferred for smaller and progressive dapping.
Precision-machined and hardened tool steel.
27 full half-sphere dies measure: 1.5, 2.0, 2.4, 2.8,
3.2, 3.6, 4.4, 4.8, 5.6, 6.4,
7.1, 7.9, 8.7, 9.5, 10.7,
11.1, 12.7, 14.3, 15.5,
15.9, 17.1, 17.5, 19.1,
20.6, 22.2, 23.8,
25.4mm ( 1⁄ 8" to 1").
Made in Europe.
PE161.00 5 1⁄ 8" x 2 1⁄ 2" x 3 ⁄ 4" $77.00
Precision-machined and hardened
tool steel. 17 full half-sphere dies
measure: 3.2, 4.8, 6.4, 7.9, 9.5,
11.1, 12.7, 14.3, 15.9, 17.5, 19.1,
20.6, 22.2, 25.4, 28.6,
31.8, 34.9mm.
PE158.00 2" x 2" $59.00
2 1⁄ 2" DaPPinG Block
DaPPinG Die
and DeSiGn Block
Precision-machined and hardened
tool steel. 21 full half-sphere dies
measure: 2.0, 3.2, 4.8, 6.4, 7.9,
9.5, 11.1, 12.7, 14.3, 15.9, 17.5,
19.1, 20.6, 22.2, 25.4, 27.0, 28.6,
31.8, 34.9, 44.5, 50.8mm.
Made in Europe.
PE159.00 2 1⁄ 2" x 2 1⁄ 2" $75.00
Precision-machined and hardened tool steel.
14 full half-sphere dies 1⁄ 8" to 1"
(3.2 – 25.4mm). 8 different size
half cylinders ( 1⁄ 8" – 1"dia.)
along the edge of the block
for shaping strip, rings
and setting stones.
Made in Europe.
PE162.00 3 3 ⁄ 4" x 2 1⁄ 2" x 7⁄ 8" $57.85
BenDinG
Block
Use to form rings, tubing,
bezels. 5 semi-circular
grooves (1 3 ⁄ 8" – 2 7⁄ 8" dia.).
Hardened tool steel. Made in Europe.
PE268.00 6 1⁄ 4" x 2 3 ⁄ 8" x 2" $68.00
1 1⁄ 4", 1 5 ⁄ 8", 2" dia.
7 7⁄ 8" length. Made in USA.
PE268.500 Mandrel $42.00
rinG BenDinG Block
Use to form rings, tubing,
bezels. 11 semi-circular
grooves ( 1⁄ 16" – 1" dia.)
and 45° “V” groove.
Hardened tool steel. Made in Europe.
PE264.00 4" x 2" x 1" $71.50
DeSiGnerS’ ForMinG BlockS
A large variety of half-round, triangular, square, rectangular and “V” grooves for shaping
and forming. Precision-machined and hardened tool steel. Made in Europe.
PE118.00 2 1⁄ 4" sq. (55mm) $64.85
PE117.00 2 3 ⁄ 4" sq. (70mm) $65.00
Deluxe DaPPinG and ForMinG Set
• 30 Piece Dapping Set
• 5 Piece I.D. Punch Set
• 2" x 2" Dapping Cube
• 2 1⁄ 2" x 2 1⁄ 2" Dapping Cube
PE228.500 $455.00
• Designer Dapping Block
• 27 Hole Flat Dapping Block
• 22 Piece Dapping Cutter
• Laminated Hardwood Stand
BraSS DaPPinG BlockS
leaD DaPPinG
Block
Provides a soft base
for chasing and stamping.
3 1⁄ 4" x 3 1⁄ 4" x 7⁄ 8"
25.061 $14.25
112
Metalliferous
Metals • tools • supplies
Highly polished
brass blocks with
depressions on six
sides. Softer than
steel blocks.
Use with dapping
punches to dome thin,
high karat or fine alloy sheet metal.
DB055
2"
$27.50
DB065
2 3 ⁄ 8" $32.50
Blocks Punches Disc Cutters • DAPPiNg ToolS
u
u
Wood Forming block
Wood dapping block
and punches
Made of hardwood and hand sanded to a
smooth finish. Use when marring
could be an issue while working
with fine or soft metals.
Four round depressions:
2.25", 2.125", 1.875" and 1.75".
Five “U” channels.
Two 90° channels.
Two 45° grooves.
DAP130.00 2 3 ⁄ 4" square $12.50
Hardwood block
with 2 punches.
Use for shaping
and removing dents.
Will not mar metal.
2 1⁄ 4" square block.
DB043 $7.75
hardWood dapping punch set
Quality-finished hardwood punches won’t mar metal
when shaping and forming. Use on thin, fine, or high
karat metal. 24 punches (7 – 40mm dia.).
190.203 $19.85
bezel blocks
Hardened, polished tool steel bezel blocks. Used for forming tapered
bezels from flat stock. The complementary hardened tapered punch fits
all the depressions in the block. Made in Italy.
item no.
shape
DB501
DB502
DB503
DB505
DB507
DB508
DB509
TX1500
Emerald
Round
Octagon
Oval
Hexagon
Pear
Square
Round
profile
range
punch angle
#/holes
price
4-14mm
5-20mm
4-14mm
4-14mm
4-14mm
4-14mm
4-14mm
5-20mm
17°
17°
17°
17°
17°
17°
17°
28°
11
20
11
11
11
11
11
20
$125.00
$95.00
$98.00
$131.00
$96.90
$143.75
$110.00
$94.70
super bending tool
The base and handle provide a high level of torque and strength for
bending metal effortlessly. Set contains round center core dies with
matching outer dies in sizes 12, 14, 16, 20 & 22mm, plus additional
45° & 90° dies. Mounting hardware included.
PE301.00 $125.00
disc cutters
Made from high carbon tool steel. Each disc cutter is individually machined to exacting tolerances, hardened
and tempered. Each punch has a shoulder ring to prevent it from falling through the base after it has been
struck. Cut discs from gold, silver, brass and copper up to a thickness of 18 gauge (0.040"). Made in Europe.
small
disc cutter
7 punches with diameters of:
1
⁄ 8", 3 ⁄ 16", 1⁄ 4", 5 ⁄ 16", 3 ⁄ 8", 7 ⁄ 16", 1⁄ 2".
PE194.10 $84.00
large
disc cutter
5 punches with diameters of:
1
⁄ 2", 5 ⁄ 8", 3 ⁄ 4", 7 ⁄ 8", 1".
PE195.10 $80.00
combination
disc cutter
11 punches with diameters of:
1
⁄ 8", 3 ⁄ 16", 1⁄ 4", 5 ⁄ 16", 3 ⁄ 8", 7 ⁄ 16", 1⁄ 2",
5
⁄ 8", 3 ⁄ 4", 7 ⁄ 8", 1".
PE196.10 $124.00
Metalliferous
Metals • tools • supplies
113