N30U DIGITAL PANEL METER Input Digital Interface

Transcription

N30U DIGITAL PANEL METER Input Digital Interface
N30U DIGITAL PANEL METER
• Measurement: temperature, resistance, standard signals.
• 3-colour display (14 mm high), programmable in 3 ranges
of the measured value.
• Meter programming from keyboard or through the RS-485
interface by means of the free LPConfig program.
• 4 alarm outputs with signalling on LED diodes,
working in 6 different modes.
• Conversion of any measured value into an analog signal
0/4...20 mA or 0...10 V.
• Storage of minimal and maximal values for all measured
quantities.
• Supply of object transducers (ver. N30U-1XXXXXXX).
• 21-point individual characteristic for the measured value.
FeATUReS:
LPConfig
Program
MOD
BUS
21 points
charact.
RTC
Password
protection
IP65
Example of Application
INPUTS:
Alarms
RS485,
Modbus
Wireless transmission
SM7 modules
N30U
digital
meter
-10..10 -20..20
V
mA
RS485/USB
converter
(e.g. PD10)
60 mV
Temperature
Pt100 probe
oUTPUTS:
0 .. 20 0..10
V
mA
2x
RS
485
GAlVANIC
ISolATIoN:
Supply
RS
485
Export department:
+48 68 45 75 302 / 321 /
276 / 386 / 233
Fax:
+48 68 32 54 091
e-mail: [email protected]
LUMEL S.A.
ul. Słubicka 1
65-127 Zielona Góra
POLAND
WWW.LUMEL.COM.PL
HMI panel
Measurement
and
visualization of analog
standard signals: Pt100,
TC, 20 mA, 60 mV, 10 V.
Measured parameters
are transmitted to the
HMI operator panel
through radio modules.
PC Computer/programming
using the LPConfig
program
Shunt
Input kind
Pt100
Pt500
Pt1000
400 Ω
4000 Ω
Thermocouple of J type
Thermocouple of K type
Thermocouple of N type
Thermocouple of E type
Thermocouple of R type
Thermocouple of S type
Voltage input 0...10 V
Current input
Input
Maximal measuring range
Class
Additional error
- due to automatic compensation of the reference
junction
temperature
 1°C
-205...855°C (-200...850°C)
0...410 Ω (0...400 Ω)
0...4010 Ω (0...4000 Ω)
-200..1200 °C (-100..1200 °C)
-200..1370 °C (-100..1370 °C)
-200..1300 °C (-100..1300 °C)
-200..1000 °C (-100..1000 °C)
-50..1768 °C (-50..1760 °C)
-50..1768 °C (-50..1760 °C)
-13...13 V (-10...10 V)
-24...24 mA (-20...20 mA)
Voltage input
-10...63 mV (0...60 mV)
Current time
00.00...23.59
- due to automatic compensation of the cable resistance for thermoresistors
 0,5°C
0.1
- due to automatic compensation of the cables for
resistance
measurement
 0,2Ω
- from temperature changes
100 % of the class / 10 K
0.5 sec./ 24h
Outputs
Output kind
Properties
Relay
output
• 2 x relays, voltageless NOC contacts
load-carrying capacity 250 V a.c./ 0.5 A a.c.
• 2 x relays, voltageless switched contacts
load-carrying capacity 250 V a.c./ 0.5 A a.c.
Analog
output
• current programmable 0/4..20mA,
load resistance ≤ 500 Ω
• voltage programmable 0...10 V load resistance ≥ 500 Ω
Error of analog output: 0.2% of the set range
Additional error from temperature changes: 50% of the
class/10K
• typu OC, passive npn, 30 V d.c./30 mA
Voltageless output
• 24 V d.c./ 30mA
only for meter version: N30U-1XXXXXXX
OC output
Auxiliary
supply
Remarks
Digital Interface
Interface type
RS-485
transmission protocol
MODBUS RTU
modes
8N2, 8E1, 8O1, 8N1
baud rates
4.8, 9.6, 19.2, 38.4, 57.6, 115.2 kbit/s
N30U DIGITAL PANEL METER
External Features
5 digit LED display indication range -19999..99999
digit height: 14 mm
< 0.2 kg
96 ´ 48 ´ 93 mm
from frontal side: IP65
Readout field
Weight
Dimensions
Protection grade (acc. to EN 60529)
three-color display (colour changes depending on
displayed value): red, green, orange
Rated Operating Conditions
85...253 V a.c. (40...400 Hz) or d.c.,
20...40 V a.c. (40...400 Hz), 20...60 V d.c.
ambient: -25...23...55°C
25...95%
any
0...400 A/m
Supply voltage
Temperature
Relative humidity
Operating position
External magnetic field
See Also:
Panel cut-out: 92+0,6 ´ 45+0,6 mm
from rear side: IP 10
Free LPConfig
software for easy
programming of
LUMEL's products.
Available on our
website
power consumption < 6 VA
storage: -30...70°C
condensation inadmissible
Safety And Compatibility Requirements
Noise immunity
Noise emissions
basic
2
III
for the supply circuit: 300 V
for remaining circuits: 50 V
< 2000 m
Electromagnetic compatibility
Isolation between circuits
Pollution grade
Installation category
Maximal phase-to-earth operating voltage
Altitude above sea level
acc. to EN 61000-6-2
acc. to EN 61000-6-4
acc. to EN 61010-1
KD7 recorder with
MODBUS master
protocol for recording
data measured by
N30U.
Connection Diagrams
Supply
Supply
Fig. 1 Description of signals on connection
strips.
Supply
Fig. 2 Ways of the meter connection.
OUR OFFER
Ordering
Table 1. Ordering codes:
N30U - X
Supply:
85...253 V a.c./d.c.
20...40 V a.c., 20...60 V d.c.
Additional outputs:
lack
OC output, RS-485, analog outputs
OC output, RS-485, analog outputs
switched-over relay outputs
Unit:
unit code acc. to the table 2
Version:
standard
custom-made*
Language:
Polish
English
other*
Acceptance tests:
without extra requirements
with an extra quality inspection certificate
acc. to customer’s request*
Table 2. Codes of highlighted unit:
X XX XX X
X
1
2
0
1
2
XX
00
XX
Order example: The code N30U - 1 0 26 00 E 0 means
N30U - programmable N30U digital panel meter
1 - supply: 85...253 V a.c./d.c.
0 - lack of additional outputs
26 - unit "°C" acc. to tabel 2
00 - standard option
E - English language
0 - without extra requirements
Shunts for
measurement DC
current from 5A up
to 15 kA. For more
details see our
ANALOG METERS
catalogue.
P
E
X
0
1
X
Code
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
Unit
lack of unit
V
A
mV
kV
mA
kA
W
kW
MW
var
kvar
Mvar
VA
kVA
MVA
kWh
MWh
kvarh
Mvarh
Code
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
Unit
kVAh
MVAh
Hz
kHz
Ω
kΩ
°C
°F
K
%
%RH
pH
kg
bar
m
l
s
h
m3
obroty
* - after agreeing with the manufacturer
Code
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
Unit
szt.
imp
rps
m/s
l/s
obroty/min
rpm
mm/min
m/min
l/min
m3/min
pcs/h
m/h
km/h
m3/h
kg/h
l/h
XX
on order*
www.lumel.com.pl
For more information
about LUMEL's
products please visit
our website:
www.lumel.com.pl
Export department:
+48 68 45 75 302 / 321 /
276 / 386 / 233
Fax: +48 68 32 54 091
e-mail: [email protected]
LUMEL S.A.
ul. Słubicka 1
65-127 Zielona Góra
POLAND
WWW.LUMEL.COM.PL
N30U-19A/2