SPECIFICATIONS

ColorEdge CE210W
No. SS-6616C
SPECIFICATIONS
53 cm (21.1 inch) class Calibration Color LCD Monitor
Viewable Image Size 53.4 cm (21.0 inches)
CONTENTS
1
2
3
4
5
6
7
8
9
10
ABOUT THE SPECIFICATIONS .......................................................................... 2
PRECAUTIONS.................................................................................................... 3
USER CONTROL SPECIFICATIONS .................................................................. 5
LCD SPECIFICATIONS........................................................................................ 8
ELECTRICAL SPECIFICATIONS....................................................................... 12
MECHANICAL SPECIFICATIONS ..................................................................... 14
ACCESSORIES.................................................................................................. 18
CERTIFICATIONS & STANDARDS ................................................................... 20
RELIABILITY & OPERATING ENVIRONMENT ................................................. 22
REVISION TRACE ............................................................................................. 23
Page 1/23
ColorEdge CE210W
No. SS-6616C
1 ABOUT THE SPECIFICATIONS
The specifications apply only to the following monitor for use in North American,
European and Asian countries.
EIZO ColorEdge CE210W
Country
Europe
Switzerland
U.K.
China
Taiwan
U.S.A
Canada
White
CE210WEDWS
CE210WESWS
CE210WUKWS
CE210WCNWS
CE210WTRWS
CE210WUSWS
Black
CE210WEDBK
CE210WESBK
CE210WUKBK
CE210WCNBK
CE210WTRBK
CE210WUSBK
The specifications contain copyrighted or original know-how. No part of these
specifications may be reproduced or disclosed to the third party without the permission of
Eizo Nanao Corporation.
If a situation not specified in these specifications or a question about them arises,
negotiations should be made between the customer and Eizo Nanao Corporation on the
modification of specifications.
DPMS is a trademark and VESA is a registered trademark of Video Electronics Standards Association.
VGA is a registered trademark of International Business Machines Corporation.
Windows is registered trademarks of Microsoft Corporation.
PowerManager is trademarks of EIZO NANAO CORPORATION.
ColorEdge, ScreenManager and EIZO are registered trademarks of EIZO NANAO CORPORATION.
All brand names and product names are trademarks or registered trademarks of their respective companies.
Page 2/23
ColorEdge CE210W
No. SS-6616C
2 PRECAUTIONS
2.1 Applications
This product is intended to be used with data processing devices for the personal
computer or OA devices.
This product is not developed for applications which would require higher reliability,
and safety such as those listed below.
•
Transportation systems (Ship, aircraft, train, automobile, etc.)
•
Safety devices (Disaster prevention system, security control system, etc.)
•
Aviation & Spacecraft devices
•
Equipment for the use that have direct effect on human life (Life support system,
Medical equipment or devices used in the operating room, etc.)
•
Nuclear energy control devices (Nuclear energy control system, security control
system of nuclear facility, etc.)
•
Main line devices (Operation control for the transportation, control systems
specific to the aircraft, etc.)
Please contact Eizo Nanao Corporation for consultation, if you plan to use a product
in the manners listed above or for any other deviation of use from the standard
application.
2.2 Precautions for the product specifications
The product is designed for in-door use only. Please read the User’s manual
included into the product package carefully before use.
This product has been adjusted specifically for use in the region to which it was
originally shipped. If operated outside the region, to which it was originally shipped,
the product may not perform as stated in the specifications.
The product specifications are also guaranteed with the EIZO standard power cord
and signal cable provided with the product and/or EIZO optional cables.
Please find listed below phenomena caused by the characteristics inherent to the
LCD itself that are not defects of the product.
(1) Defective pixels, bright point
The screen may have some defective pixels as slightly light or dark areas on the
screen.
(2) After image, retained image
When the screen image has been changed after displaying the same image for a
period, after images (retained image) may appear.
(3) Backlight life
The backlight of the LCD monitor has a fixed life span. When the screen becomes
dark or begins to flicker, the backlight needs to exchange.
(4) Characteristics for the LCD panel
Take care when handling the LCD panel. Do not scratch or press on the panel
with any sharp objects, such as pencil or pen. Cleaning the panel with a dirty or
rough cloth also may damage the panel. Do not press on the panel or edge of the
frame strongly as this will result in damage to the screen.
(5) Warm-up period
It takes approx. 30 minutes until the monitor and component stabilizes. Allow the
monitor to warm up for at least 30 minutes before making adjustment.
Page 3/23
ColorEdge CE210W
No. SS-6616C
When transferring the monitor from a cold environment to a warm environment,
dew condensation might occur. When this occurs, please wait until the dew
condensation disappears from the monitor before turning on the power. Turnings
the power on too soon with dew condensing will damage the monitor.
Periodic cleaning of the screen is recommended to maintain image clarity.
2.3 Exclusion of liability
EIZO and EIZO authorized distributors shall have no obligation under this warranty
whatsoever in respect of any of such defects, or in any of such cases, as set forth below:
(1)
(2)
(3)
(4)
(5)
(6)
(7)
Any defect of the product caused by freight damage, modification, alteration,
abuse, misuse, accident, incorrect installation, disaster, faulty maintenance
and/or improper repair by third party other than EIZO and EIZO authorized
distributors.
Any incompatibility of the product due to possible technical innovations and/or
regulations.
Any deterioration of display performance due to expendable parts such as LCD
panel and/or backlight, etc… (e.g. changes in brightness, color, brightness
uniformity, color uniformity, color uniformity, defective pixels and/or burnt
pixels, etc…)
Any defect of the product caused by external equipment.
Any defect of the product on which the original serial number has been altered
or removed.
Any normal deterioration of the product, particularly that of consumables,
accessories, and/or attachments (e.g. buttons, rotating parts, cables, user’s
manual, etc…).
Any deformation, discoloration, and/or warp of the exterior of the product
including that of the surface of the LCD panel.
2.4 Limited Warranty
The product is warranted by “LIMITED WARRANTY” included with the product.
Product Number
Monitor
LCD Panel
*1
5 years
3 years
CE210WEDWS/ CE210WEDBK
CE210WESWS/ CE210WESBK
*1
3 years
5 years
CE210WUKWS/ CE210WUKBK
*1
5 years
3 years
CE210WTRWS/ CE210WTRBK
*1
5 years
3 years
CE210WCNWS/ CE210WCNBK
*1
3 years
5 years
CE210WUSWS/ CE210WUSBK
*1
The product shall be free from defects in material and workmanship for a
period of five (5) years, but subject to the usage time being 30,000 hours or less
from the date of purchase.
Panel qualification (Bright dots, Black dots) is guaranteed 6-month after production.
EIZO NANAO COPORATION will stock parts of this monitor at least seven years
after the stop of production. In repairing the monitor, we will use renewal parts
which comply with our QC standards for preserving the environment.
Page 4/23
ColorEdge CE210W
No. SS-6616C
3
USER CONTROL SPECIFICATIONS
3.1 Function & Control
A1: Front
(1) ScreenManager (OSD menu)
(2) FineContrast menu
(3) Input signal selection button
(1)
(4) Auto adjustment button
(5) Enter button
(6) Control buttons (Up, Down, Left, Right key)
SIGNAL
AUTO
* Right and Left buttons can be used as the fine
contrast mode switching buttons.
ENTER
(2)
(7) Power button
Control Panel
(3)
(4)
(8) Power indicator (LED)
(6)
(5)
(7)
(8)
A2: Rear / side
(9) Stand (Height adjustable)
(10)Slot for security lock
(9)
(11)Cable holder
(15)
(12)Power connector
(13)DVI-I 29 pin input connector x2
(11)
(14)USB Downstream (Series A) port x1
(10)
(12)
(15)USB Upstream (Series B) port x 2
(13)
(14)
• Status of Power Indicator (LED)
Monitor
Power button Off
On
Signal check
Power saving mode
Advanced notice for Off timer
LED
No light
Blue
Blue
Orange
Blue blinking
Page 5/23
ColorEdge CE210W
No. SS-6616C
3.2 ScreenManager (OSD) menu
Pushing the Enter button, ScreenManager menu appears. The followings are
adjustment items adjusted by using the control buttons. Performing the reset
function, all settings return to below. (both analog input and digital input)
Main Menu
Adjustment/Setting(Sub menu)
Analog
Digital
Default
Input
Input
settings
Screen
Clock
√
Phase
√
Position
√
Resolution
√
Range Adjustment
√
Smoothing
3
√
√
Signal Filter
*1
√
Color
Brightness
30%
√
√
Temperature
6500K
√
√
Gamma
2.2
√
√
Saturation
0
√
√
Hue
0
√
√
Gain
100%
√
√
6 Color
0
√
√
Reset
√
√
PowerManager Set
DVI DMPM
DVI DMPM
√
VESA DPMS
VESA DPMS
√
Others
Screen Size
Full Screen
√
√
Border Intensity
127 (Gray)
√
√
Input Signal Priority
Signal1
√
√
Off Timer (on/off)
Disable
√
√
Beep
On
√
√
Menu settings Menu Size
Normal
√
√
Menu Position
Center
√
√
Translucent
Opaque
√
√
Menu Off Timer
45 sec.
√
√
Power Indicator
Enable
√
√
Reset
√
√
Information
Page 1: input signal, current
√
√
displayed frequency and
(3 pages) (3 pages)
resolution,
Page 2: PowerManager setting, Off
timer
Page 3: Model Name, Serial
Number and Usage Time
Language
English, German, French, Spanish,
English
√
√
Italian, Swedish, Japanese
FineContrast
Custom
√
√
EIZO Logo
On
√
√
Adjustment lock
Disable
√
√
*1 Default Setting of the signal filter
Dot clock
~34MHz
34~49MHz
49MHz~
Default settings
3
2
1
Page 6/23
ColorEdge CE210W
No. SS-6616C
3.3 Others
• FineContrast selection
Following modes can be selected only by pushing Control button (Left/Right). At
this time, small information window appears on the bottom-left corner.
FineContrast default settings
Mode
Brightness
Temperature
Gamma
Saturation
Hue
Custom
30%
6500K
2.2
0
0
sRGB
100%
6500K (Fixed)
2.2(Fixed)
Calibration
CAL(USB application control)
• Auto Adjustment, Range Adjustment (Only analog input)
Pushing the Auto adjustment button automatically centers the displayed image,
adjusting the clock, phase level and resolution. Pushing the Auto Adjustment
button while displaying the Range Adjustment menu automatically optimizes the
tone of analog input signal.
• Adjustment Lock function
To Lock the buttons, switch the power on while pressing the Auto adjustment
button. Then, the Auto Adjustment button and the settings on the ScreenManager
are locked. Control buttons (Left, Right key) by FineContrast, brightness control
buttons (Up, Down key), the Input signal selection button and the Power button
remain enabled. FineContrast shortcut menu is always effective.
To unlock the buttons, switch the power on again while pressing the Auto
adjustment button.
Page 7/23
ColorEdge CE210W
No. SS-6616C
4 LCD SPECIFICATIONS
4.1 Panel specifications
Type
Size
Resolution
Viewable Image Size
Dot Pitch
Face Treatment
Color TFT (VA type)
21.1 inch (53.4 cm)
1680x 1050
453.6 mm (H) x 283.5 mm (V) (Diagonal: 534 mm)
0.270 mm x 0.270 mm
Haze44% Hard-coating (Hardness 3H*)
* Protection from scratching with the 3H pencil
4.2 Optical specifications
(1) Guideline
Measured under the condition of the
right diagram in the dark room or
the same level condition.
Item
Viewing Angle
Value
θ11 (Top): 89° typ.
θ12 (Bottom): 89° typ.
θ21 (Left): 89° typ.
θ22 (Right): 89° typ.
Conditions
At Contrast Ratio;
CR≥10:1 with white field
and black field pattern.
Contrast Ratio
1000:1 typ.
θ=0°
(Contrast ratio with the
center brightness of black
field and white field
pattern.)
10%
90%
Response
time
Rise time
Fall time
Gray to
Gray
8ms typ.
8ms typ.
8ms typ.
Page 8/23
Average response time
between each grayscale
level of 31, 63, 95, 127,
159, 191 and 223
ColorEdge CE210W
No. SS-6616C
Item
Chromaticity
Value
White x:0.31, y:0.33 typ.
Bright Uniformity
Red x:0.64, y:0.33 typ.
Green x:0.30, y:0.60 typ.
Blue x:0.15, y:0.06 typ.
(Lmax-Lmin)/Lmax x100 ≤ 25
Conditions
White field. Measured at
center of the panel.
Digital input. Color
Temperature: OFF
Color temperature: OFF
Measured at below points
in White field.
10%
90%
(1
(2 (3
(4
(5
(7
10%
²
Brightness
450 cd/ m typ.
γ value
2.2±0.1 (whole characteristic)
±5% of whole characteristics.
(Each point variation)
The light leakage is excluded.
Page 9/23
50%
(6
(8 (9
50%
90%
Measured at center of the
panel with white field
pattern at 25°C. (Default
setting)
Calibration mode
γ = 2.2
ColorEdge CE210W
No. SS-6616C
4.3 LCD Panel Qualification
* Panel qualification (Bright dots, Black dots) is guaranteed 6-month after
production.
4.3.1 Definition
A dot observed through a ND filter or on the prescribed gray background is a
bright dot.
A blinking dot is also counted as a bright dot.
A black dot observed by human eyes is counted as a black dot no matter how
bright or big it is.
A set of coupled defective dots is counted as 1 defective dot.
e.g.) A set of 2 coupled dot ··· counted as a 1 defective dot
A set of 3-coupled dot ··· counted as a 1 defective dot
A Single and/or coupled defective dot(s) is/are counted separately and
applied each standard value.
e.g.) a single defective dot, a 2-coupled dot ··· total 2 dots
A single and/or coupled defective dot(s) within the allowable distance/ area
is/are counted separately and applied each standard value.
e.g.) a single defective dot + a 2-coupled dot = 2 dots
A shining dot due to a foreign substance (transparent substance like acrylic
chip) on polarizer is not counted as a bright/black dot. Inspect this shinning
dot referring the standard of foreign substance.
4.3.2 Condition
Item
Condition
Ambient light
About 500~700Lx
Ambient temperature
0~35°C
Observation distance from the panel
surface
About 300~500mm (Straight angle)
Measurement pattern
White screen, Black screen
(Prioritize conditions of panel qualification)
Whole area
Area Definition
Page 10/23
ColorEdge CE210W
No. SS-6616C
4.3.3 Panel Qualification
* Panel qualification (Bright dots, Black dots) is guaranteed 6-months after production.
Item
Value
Conditions
Notes
Signal: black field Couplled dots are
Bright dot:
pattern
defined as anyone of
1 defective dot
2 or less
slasshed or dotted
(Green)
condition：
dot and the center
2 coupled
1 or less
Dots visible on
dot in the picture
3 coupled or over
0 or less
background of
below.
2 or less
Total
more than 96
Allowable distance/ Distance: 15 mm or levels of gray.
area
less
Area: φ Black dot
1 defective dot
2 coupled
3 coupled
Total
Allowable distance/
area
Bright + black dots:
Total
Allowable distance/
area
5 or less
2 or less0 or less
5 or less
Distance: 5 mm or
less
Area:φ -
Signal: white, red,
green and blue
field pattern
Couplled dots are
defined as anyone of
slasshed or dotted
dot and the center
dot in the picture
below.
-
The distance
between bright dot
and black dot is
excluded.
It judges by the
distance only of
bright (Black) dot on
one screen.
5 or less
Distance Area
-
4.3.4 Measurement Standard of the outline
Items
Scratch
Line
Circle
Foreign
substan
ce
Line
Circle
Values
W ≤ 0.01mm
L ≤ 0.3mm
W ≤ 0.1mm
0.3 < L ≤ 5.0mm
W=5.0mm < L
0.1mm < W
W=D ≤ 0.5mm
0.5mm < D
W ≤ 0.01mm
L ≤ 0.3mm
W ≤ 0.08mm
0.3 < L ≤1.0mm
W=1.0mm < L
0.8mm < W
L=D ≤ 0.1mm
D ≤ 0.3mm*
0.3mm < D ≤0.5mm
0.5mm < D
3
0
0
3
0
3
0
0
8
4
0
10
Total
Page 11/23
Notes
W: width (mm.)
L: length (mm.)
D: diameter (mm.)
W: width (mm.)
L: length (mm.)
D: diameter (mm.)
*Tiny bright dot due
to a foreign
substance on
polarizer
ColorEdge CE210W
No. SS-6616C
5 ELECTRICAL SPECIFICATIONS
All measurements are subject to the conditions listed in 6.1, unless otherwise specified by
the item in section 6.2 to 6.5.
5.1 Standard measurement conditions
Items
Condition
Analog input
Digital input
Black and White two dotted mesh pattern
TMDS Single Link
0.7 Vp-p 75 Ω terminal
Pattern of the signal
Video signal level
Brightness
Gamma value
Ambient temperature & humidity
Input current
100 % (Custom)
2.2
15 ~ 35°C
AC100-120V±10% 50/60Hz
AC200-240V±10% 50/60Hz
After warm up for at least 30 minutes
VESA 1650 Dots x 1050 lines @60 Hz
Measurement
Mode
5.2 Displaying Performance
Items
Values
Conditions
Analog input
Scanning Frequency
Horizontal
Vertical
Synchronizing range
Display Area Size
Display Colors
Digital input
24kHz ~ 82kHz
31kHz ~ 65kHz
49Hz ~ 86Hz
59 ~ 61Hz
1280 x1024 Mode: ~76Hz (VGA TEXT: 69 Hz ~ 71 Hz)
1680 x 1050 Mode: ~61Hz
59.0~61.0Hz
453 x 283mm
16.7 million colors
Non Interlaced
5.3 Signal Input
Items
Values
Conditions
Analog input
Retrace Time
Min sync pulse width
Min sync pulse +
Back Porch
Signal input
Sync Input Signal
Form
Video Input Signal
Form
Input Signal
Dot Clock
Horizontal: 0.5µS
Vertical: 1 H
Horizontal: 1.2 µS
Vertical: 12 H
(a) H/V Separate, TTL, Positive
/ Negative
(b) H/V Composite, TTL,
Positive/ Negative
Analog, Positive
(0.7 Vp-p / 75 Ω)
150MHz Max.
Page 12/23
Digital input
Horizontal: 0.5µS
Vertical: 1 H
Vertical: 12 H
The image is
not lacked.
The image is
adjustable to
the center
-
Non Interlaced
-
Separate sync
TMDS (Single Link)
120MHz Max.
ColorEdge CE210W
No. SS-6616C
5.4
Power Supply
Items
Values
Analog input
Input voltage
Input current
In-rush current
Leakage current
Condition
Digital input
100-120 VAC±10 % 50/60 Hz
200-240 VAC±10 % 50/60 Hz
80W or less
Less than 0.8A at 100-120 VAC
Less than 0.45A at 200-240 VAC
70W or less
Less than 0.7A at 100-120 VAC
Less than 0.4A at 200-240 VAC
70 A peak max. (Cold)
100 A peak maxi. (Hot)
Less than 0.25mA at 100VAC
Less than 0.7mA at 240VAC
Power Consumption
Power saving mode
Standby power
consumption
2W or less*1
1W or less*2
Power save function
VESA DPMS
USB load
No USB load
AC246V Input
AC100/115/230V,
USB upstream port in
non-operation.
*1
Single input signal
*2
When secondly
power is off. No USB.
DVI-DMPM
Page 13/23
ColorEdge CE210W
No. SS-6616C
6 MECHANICAL SPECIFICATIONS
6.1 Configuration
NOTE: All of the dimensions, weights and angles below are reference values.
With Stand
Dimensions (net)
Weight (net)
501mm (W) x 341.1~459.5mm (H) x 230mm (D)
19.7” (W) x 13.4” - 18.1” (H) x 9.1” (D)
approx. 8.2kg (18.1 lbs)
Tilt Angle
Up: 60° Down: 5°
Rotation Angle
Right: 172° Left: 172°
Outline Drawing
Refer to the below.
Unit: mm (inches)
60(2.36)
85(3.35)
Ø230(9.1)
466(18.3)
2˚
˚
39.7(1.56)
17
172
SWIVEL
TILT
501(19.7)
55.6(17.9)
1
1(0.04)
5˚
25˚
25(0.98)
14.5(0.57)
294(11.6)
22.75(0.9)
1(0.04)
285.5(11.2)
24(0.94)
331(13.0)
459.5(18.1)
22.7(0.89)
1(0.04)
457.6(18.0)
100(3.9)
80(3.15)
21.7(0.85)
341.1(13.4)
100(3.9)
344.2(13.6)
116(4.6)
Page 14/23
ColorEdge CE210W
No. SS-6616C
Without Stand
Dimensions (net)
501 mm (W) x 355 mm (H) x85 mm (D)
19.7” (W) x 14.0” (H) x 3.35” (D)
Approx. 5.8 kg (12.8 lbs)
Weight (net)
Hole spacing
Screw mounting hole size
Compatible with VESA standard
100 mm x 100 mm
4-M4
Outline Drawing
Refer to the below.
Unit: mm (inches)
501(19.7)
55.6(17.9)
85(3.35)
60(2.36)
200.5(7.9)
100(3.9)
200.5(7.9)
139.5(5.5)
100(3.9)
285.5(11.2)
331(13.0)
355(14.0)
24(0.94)
22.75(0.9)
115.5(4.5)
22.7(0.89)
25(0.98)
6.2 Packing Specifications
NOTE: All of the dimensions and weight below are reference values.
Packing Dimensions
600 mm (W) x 530 mm (H) x 325 mm (D)
23.6” (W) x 20.9” (H) x 12.8” (D)
Packaging weight
approx. 11.2kg (32.4 lbs)
Stack limit
4 units (Maximum)
Packaging Drawing
Refer to page 25
Page 15/23
ColorEdge CE210W
No. SS-6616C
6.3 Connector Specifications
(1) DVI-I connector
1 2 3 4
5 6
7 8
C1 C2
9 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
C3 C4
C5
Pin No. Input Signal
1
TMDS Data22
TMDS Data2+
12
Input Signal
TMDS Data1/3
ShielD
-
3
TMDS Data2/4
shielD
-
13
-
23
TMDS Clock
ShielD
TMDS Clock+
14
15
24
C1
TMDS ClockAnalog Red
16
+5V Power
Ground (return
for +5V, H sync
and V sync)
Hot plug Detect
C2
Analog Green
17
TMDS Data0-
C3
Analog Blue
18
TMDS Data 0+
C4
19
TMDS Data/5
ShielD
C5
20
-
-
Analog
Horizontal Sync
Analog Ground
(analog R,G & B
return)
-
4
5
6
9
DDC Clock
(SCL)
DDC
Data(SDA)
Analog Vertical
Sync
TMDS Data1-
10
TMDS Data1+
7
8
Pin No.
11
Pin No.
21
Input Signal
-
22
(2) USB Ports
Upstream
Downstream
Series B Connector
No.
1
2
3
4
Series A Connector
Signal
VCC
- Data
+ Data
Ground
Page 16/23
Note
Cable power
Serial Data
Serial Data
Cable Ground
ColorEdge CE210W
No. SS-6616C
6.4 Materials
Cabinet
Stand
Packing Case
Packing Cushion
PC + ABS
ABS
Cardboard
Foam polystyrene
6.5 Free Mount installation conditions
It is possible to perform free mount installation in the following combination.
Monitor rotation direction
(A)
(B)
Inclination on the surface
(1), (2), (4) and the middle
(1), (2), (4) and the middle
Page 17/23
ColorEdge CE210W
No. SS-6616C
7 ACCESSORIES
Power Cord
Signal Cable
Setup Guide
User’s Manual
CD-ROM (EIZO LCD Utility Disk)
Quick Reference
Warranty Card
Adjustment Certificate
Screw for the mount option installation
2.0 m, VDE approved separate cord with 3 pin plug
2.0 m, UL/CSA approved separate cord with 3 pin plug
2.0 m, BS approved separate cord with 3 pin plug
2.0 m, SEV approved separate cord with 3 pin plug
2.0 m, BSMI approved separated cord with 3 pin plug
2.0 m, CCC approved separate cord with 3 pin plug
√
FD-C39 (DVI-D~DVI-D, 2.0m)
FD-C16 (DVI-I~D-sub mini 15pin-15pin, 2 m)
MD-C93 (USB Cable)
English, German, French
Taiwan (Supplied)
Chinese
Refer to section 8.2
English and Japanese
English, German, French
English and Japanese
4 pcs of M4 x 12
√
√
√
√
√* Color: Black
(Note) Precaution or notation sheets may be added or removed.
Page 18/23
CNBK
√*
√*
√
√*
√
√*
√
√*
√
√
√
√
√
√
TRBK
ESBK
UKBK
USBK
EDBK
CNWS
TRWS
ESWS
UKWS
Item
USWS
EDWS
7.1 Accessories
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√*
√*
√*
√
√
√
√
√
√
√*
√*
√*
√
√
√
√
√
√
√*
√*
√*
√
√
√
√
√
√
√*
√*
√*
√
√
√
√
√
√*
√*
√*
√
√
√
√
√
√
√
√*
√*
√*
√*
√
√
√
√
√
√
√
ColorEdge CE210W
No. SS-6616C
7.2 EIZO LCD Utility Disk
Item
Launcher software
Monitor manual
ColorNavigator CE
ColorNavigator CE manual
Screen adjustment software
INF file
INF file manual
ICC / ColorSync Profile (2 kinds)
ICC / ColorSync Profile Manual
Readme
Windows area
√
√ (English, Japanese, German, French)
√
√ (English, Japanese, German, French)
√ (2000/XP)
√ (English, Japanese)
√
√ (OS X)
√ (English, Japanese)
√ (OS 9 OS X)
√
√ (English, Japanese, German, French)
√
√ (English, Japanese, German, French)
√ (English, Japanese, German, French)
√
√ (English, Japanese, German, French)
√ (English, Japanese, German, French)
Page 19/23
Macintosh area
ColorEdge CE210W
No. SS-6616C
8 CERTIFICATIONS & STANDARDS
Standard
Origin
ED
ES
UK
US
TR
CN
8.1 Certifications
TÜV/GS
CE
EN60950-1:
[72/23/EEC:Low Voltage Directive]
EN60950-1
[89/336/EEC:EMC Directive]
EN55022 (Class B)
EN55024
EN61000-3-2
EN61000-3-3
UL60950-1
CAN/CSA-C22.2 No.60950-1
FCC part.15 subpart B Class B
ICES-003 Class B (Canada)
ISO13406-2
prEN 50279
√
√ √ √
c-TÜV-us
FCC
ICES-003
TÜV/Ergonomie
√
√
√
√ √ √ √ √ √
TCO’03 Flat Panel Displays
√ √ √ √ √ √
Ecological requirement
Type Approval (-TR only) CNS13438 (Class B)
√
CNS14336
CCC (Planned)
GB4943
√
GB9254
GB17625.1
AS/NZS CISPR22 (Class B)
C-tick
(Australia, New Zeeland) AS/NZS 61000.3.3
AS/NZS 61000.3.2
Energy Star
Energy Star Ver.4.0
√ √ √ √
(Caution) In order to comply with the standards in the chart above, it is necessary to
bundle the Power Cord and User’s Manual specified by these standards.
TCO’03
8.2 Standards
Origin
ED
ES
UK
US
TR
CN
Organization
IEC60950-1
√ √ √ √ √
RoHS (2002/95/EC)
EC Directive
√ √ √
WEEE (2002/96/EC)
DPMS
√ √ √ √ √
VESA
DDC2B
DDWG
Digital Visual Interface (DVI) Revision 1.0
√ √ √ √ √
USB Implementers Forum Universal Serial Bus (USB) Specification Revision 2.0 √ √ √ √ √
EIZO NANAO
√ √ √ √ √
EIZO Eco Products 2004
CORPORATION
(Caution) In order to comply with the standards in the chart above, it is necessary to bundle the
Power Cord and User’s Manual specified by these standards.
CB
Page 20/23
√
√
√
√
√
ColorEdge CE210W
No. SS-6616C
8.3 Name Plate
(1) White color version
(2) Black color version
(Note) Additional standards or marking may be added to this label.
In accordance with this addition, the label code (05D***), in the lower left bottom corner will
be changed.
Page 21/23
ColorEdge CE210W
No. SS-6616C
9 RELIABILITY & OPERATING ENVIRONMENT
9.1 Reliability
Item
Value
MTBF
(Meantime between failure)
30,000 hours at standard
power input excluding
backlights.
Backlight life
50,000 hours min.
Conditions
Values calculated according to the
simplified "Parts Count Reliability
Prediction" method as specified in
MIL- HDBK-217F.
25°C for only backlight
temperature, at maximum
brightness, More than 50% of
maximum brightness at the default
9.2 Operating environment
Item
Value
Ambient
Temperature
Operation
Storage
0 °C~35 °C (32 °F~95 °F)
-20 °C~60 °C (-4 °F~-140 °F)
Ambient
Humidity
Altitude
Operation
Storage
Operation
Shipping
or Storage
30 %~80 % R.H.
30 %~80 % R.H.
up to 3,000 m (9,840 ft.)
up to 12,000 m (39,370 ft.)
Vibration
(Standard Package)
Drop Test
(Standard Package)
To be free from any damage on
the vibration test (left/right,
up/down, forward/backward) to be
carried out under the following
conditions.
To be free from any damage on
free drop from 65 cm height.
To be validated one corner,
three edges and six faces.
Page 22/23
Conditions
To be kept for 4 hours at 25 °C
<77°F> before use.
Non condensing
Frequency: 5~100~5 Hz in
every 10 minutes
Speed: 1.0G
Time: 1 hour for each direction
ColorEdge CE210W
No. SS-6616C
10 REVISION TRACE
No.
Date
Alternation
A
24 January 2006
Established
B
27 February 2006
Revised
Countries (ED, ES, UK, CN, TR) added
Page 2: 1. About the specifications
Page 4: 2.4 Limited warranty
Page20: 8.1 Accessories
Page 21: 9. Certifications and standards
User’s Manual (for TR, CN) added
Page 20: 8.1 Accessories
Page 25: 11. Packaging specification
Certifications (CCC, Type Approval) added
Page 21: 9.1 Certifications
Name plate changed
Page 23: 9.3 Name plate
EMC Label added
Page 25: 11. Packaging specification
Combination list changed
Page 19: 7.5 Free mount installation conditions
Packing Dimensions corrected (616 x 653 x 326mm
600 x 530 x 325mm)
Page 17: 7.2 packing Specifications
C
2 August 2006
Revised
Following items deleted
•
Features
•
Brightness adjustable range
•
Packaging specification
•
EAN/UPC Code
•
Options
Chromaticity: Gx 0.29
0.30
Brightness uniformity changed
{(Lmax)/(Lmin)–1} x 100 ≤ 25
(Lmax-Lmin)/Lmax x100 ≤ 25
• Page 9: 4.2 Optical specifications
Packing cushion added
•
Page 17: Packing specification
Note added
•
Page 18: Accessories
•
Page 21: Name plate
Page 23/23