2008 snow removal equipment catalog

2008 SNOW REMOVAL EQUIPMENT CATALOG
Snow/Light Material Blade
The Per fect Blade...
The Erskine Universal Snow/Light Material Blade is the perfect way
to remove snow from walks, driveways, or parking lots. Use it in
the summer for light material grading; add the optional wing kit and
your blade becomes a snow pusher, increasing your production of
larger areas and lots. Fits most newer skid steers and compact
tractors with the universal quick attach system.
Quality hoses are
used on all of our
equipment
FEATURES
Unique hinge joint allows
limited flex of blade from
side to side. Four trip
springs provide strength and
eliminate any unneccesary
moldboard trip
Easy adjustable depth
shoes make for
desired depth control
2
• 28” curved blade
• Moldboard has four (4) spring trips
for component protection
• Strong, high-carbon steel cutting edge for long life
• Features the quick attach mounting
system for fast, easy hook-up
• Our universal mounting plates fit most skid steers
• Highly visible guide markers for easy
location of blade edge/corners
• Easy-adjust depth shoes
• Hydraulic cylinder provides 25° left/right angling
• Optional wing kit turns blade into a “pusher”
• Optional urethane skid shoe and cutting edge prevents
unwanted damage when used on decorative driveways,
sidewalks, cobblestone and pavers
Guide markers provide
better visibility to locate
blade corners
Large 28” curved moldboard
3/8” x 4” strong high-carbon steel
cutting edge for long life
STANDARD SPECIFICATIONS
Optional self-contained Wing Kit
allows snow to be pushed straight
with less end-spill
Model
72”
Width
72”
Height
28”
Working Width (fully angled) 66”
Trip Type
moldboard
Trip Springs
4
Cutting Edge
3/8” x 4”
Cylinders
3 x 8 (1)
Mounting Plate
universal
Shipping Weight
675#
AVAILABLE IN...
72”, 84”, 96” and 108” models
OPTIONS
•
•
•
•
•
•
84”
84”
28”
76”
moldboard
4
3/8” x 4”
3 x 8 (1)
universal
710#
96”
108”
96”
108”
28”
28’
87”
98”
moldboard moldboard
4
4
3/8” x 4”
3/8” x 4”
3 x 8 (1)
3 x 8 (1)
universal
universal
745#
780#
Optional Wing Kit
Hardened Skid Shoes
Urethane Skid Shoes
Protective Urethane Cutting Edge
Factory Installed Faster Flat-Faced Couplers
Factory Installed Parker Flat-Faced Couplers
Optional Hardened
Skid Shoe
Optional Urethane Skid Shoe and Optional
Protective Cutting Edge prevents unwanted
damage when used on decorative driveways,
sidewalks, cobblestone and pavers
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
3
Snow Pusher
Optional “Pull-Back” System for
increased versatility. Helps pull
back snow from tight spaces. Ideal
for curbs, overhead doors, loading
docks, and against buildings
Extra thick 3/4” AR400 Skid
Shoes are 2-position adjustable
for depth control
Tubular steel frame for added
strength
Move Mountains...
The Snow Pusher is designed to move a large volume of snow very quickly –
up to five times faster than a conventional snow blade. Perfect way to
remove snow from parking lots, driveways, and from up against buildings
utilizing the optional “Pull Back” System. The universal quick attach system
fits most skid steers and compact tractors.
• 37” high side panels
• Strong, high-carbon steel cutting edge for long life
• Features the Quick Attach mounting system
for fast, easy hook-up
• Easy-adjust depth shoes
• Optional “pull-back scraper blade” turns pusher
into a “scraper” for more versatility.
High strength 1/2” carbon steel provides
extra long wear. Reversible feature allows
for twice the life of the cutting edge
4
Optional “Pull Back” System
Reinforced end plates
1/2” x 8” strong high-carbon steel
cutting edge for long life
Adjustable height skid shoes
Optional
Urethane
Protective Cutting
Edge prevents unwanted
damage when used on parking
lots, decorative driveways,
sidewalks, cobblestone and pavers
Shown here with optional “Pull-Back” System
STANDARD SPECIFICATIONS
Reinforced 3/4” end
plates are engineered
to withstand high
impact
8’
37”
37”
100”
1/2” x 8 Reversible
High Carbon
Optional Pull Back Weight
230 lbs.
Optional Pull Back
3/8” x 6 Reversible
Cutting Edge
High Carbon
Optional Urethane
Cutting Edge
1 1/2” x 8 Urethane
Shipping Weight
940 lbs.
Operating Weight
900 lbs.
Width
Height
Length
Main Cutting Edge
10’
37”
37”
125”
1/2” x 8 Reversible
High Carbon
311 lbs.
3/8” x 6 Reversible
High Carbon
1 1/2” Urethane
1020 lbs.
980 lbs.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
5
Power Angle Broom
A Per fect Sweep...
The Erskine Universal Power Angle Broom is designed for heavy-duty
sweeping of dirt, snow, and other unwanted material. It quickly
mounts to your skid steer or tractor loader. Featuring a 68” or 84”
width, hydraulic angle change, and the exclusive Floating Torsion
Suspension System™! Fits most newer skid steers and compact tractors
with the universal quick attach system.
The exclusive Floating Torsion
Suspension System™ assists
the operator in keeping
consistent and correct bristle
down-pressure. This allows the
broom to float, while sweeping
uneven areas for excellent
performance. This reduces
excessive wear on the bristles,
resulting in longer bristle life
FEATURES
Direct Drive Motor mounted
inside the brush arbor (no more chain tightening)
Shown with optional
hydraulic solenoid angling
6
• Our universal mounting plates fit most
skid steers
• Easy operation
• Exclusive Torsion Float Suspension
• Fast bristle change time
• Manual 25° right and left angle
• Optional power angling 25° right & left angle
• Requires minimum hydraulic system of
10 gpm @ 2000 psi
• Greaseable bearings for longer wear life
• Hydraulic drive motor (no chains) mounted
inside brush arbor
• Loader arms raise and lower broom
• Large 32” heavy-duty bristle packages available.
Easily assembled
greaseable bearings
for extended wear life
Large 32” heavy-duty bristle
packages available
Storage stand
Optional:
Pistol Grip Control Harness
is required if skid steer is
NOT equipped with
attachment control
system. Only needed
when ordering
hydraulic angling
model
AVAILABLE IN...
68” and 84” manual
angling models
Larger diameter bristle and more
filament than the competition allowing
for a better job and better value for
our customers
STANDARD SPECIFICATIONS
Optional:
Universal wire harness for
hydraulic models with
attachment controls. Fits
Cat/Case (8-pin) and
John Deere/New
Holland/Case/Bobcat
(14-pin)
SELECT WAFER PKG.
Model
68”
84”
Working Width
68”
84”
Working Width (fully angled)
63” @ 25°
77” @25°
Broom Angling
man 25°/opt. hyd.
man 25° /opt. hyd.
Drive System
hyd. motor direct drive hyd. motor direct drive
Flow Range
10 - 20 GPM
10 -20 GPM
Bristle Diameter
32”
32”
Bristle Sections (number) 33 zig-zag, 2 straight 42 zig-zag, 2 straight
Mounting Plate
universal
universal
Shipping Weight
790#
850#
• Poly
• Poly/Steel
• Steel
OPTIONS
• Hydraulic Angling Package
• Pistol Grip Control Harness
(for hydraulic model only NOT equipped with attachment control)
• Universal Wire Harness
(for hydraulic model only equipped with attachment control)
• Factory Installed Faster Flat-Faced Couplers
• Factory Installed Parker Flat-Faced Couplers
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
7
Snow Blower - SKID STEER
MODEL ES2400 - is a true
industrial snow blower, built to
meet the tough demands of skid
steer loaders with 24 to 42 GPM
Blowin’ Away...
MODEL ES2000 - is ruggedly built,
while remaining very economically
priced, for skid steer loaders with
11 to 25 GPM
8
A quality built blower that really works! The Erskine Universal Snow
Blower meets the tough demands of your skid-steer loader throwing snow up
to 40’ while clearing paths down to the ground. Featuring a No-Freeze-Up
chute design! Two important factors must be considered when
purchasing a snow blower for your skid steer loader – gallons per minute and
hydraulic pressure (psi) are very important to the ultimate performance and
your satisfaction. Erskine strongly recommends discussing these factors with
your dealer before purchasing a snow blower attachment for any skid steer.
Fits most newer skid steers and compact tractors with the universal quick
attach system.
Hydraulic control
valve w/electric
solenoid to control
chute functions with
built-in pressure
relief system
eliminating the need
for shear pins
A tough & durable, Super-Slide® plastic is
used to line the Erskine™ discharge chute.
This unique material is formulated especially
to help prevent plugging under heavy, wet
snow conditions.
Hydraulic chute rotation and deflection is
standard equipment. The Erskine™ design
eliminates metal-to-metal contact between
the blower and the rotating chute base,
preventing freeze-up under any conditions.
No-Freeze-Up Chute design seals
out snow and freezing slush
Optional:
Pistol Grip Control Harness
is required if skid steer is
NOT equipped with
attachment control system
The auger is protected by a
Pressure Relief Valve which
replaces the need for shear pins
Hardened
Skid Shoe
Standard on
ES2400
The fan is mounted
on a hydraulic motor
eliminating the need
for a gear box
No chains, sprockets, or PTO
shafts. Direct drive hydraulic
auger eliminates problematic
chain drive
Standard high-carbon steel cutting
edge. Optional protective
Urethane cutting edge shown here
Optional Hardened
Skid Shoe
on ES2000
Optional Urethane
Skid Shoe
on ES2000 only
Optional:
Universal wire harness for hydraulic models with
attachment controls. Fits Cat/Case (8-pin) and
John Deere/New Holland/Case/Bobcat (14-pin)
Available Options and Specifications on next page
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
9
Snow Blower - SKID STEER
...continued from page 9
FEATURES
MODEL ES1600 - attaches to
most mini skid steers
•
•
•
•
•
•
Our universal Quick Attach Plates fit most skid steers
Direct drive hydraulic auger
Replaceable bolt-on high carbon-steel cutting edge
Durable, super slippery chute prevents plugging
Hydraulic relief – no shear pins
Hydraulic control valve with electric solenoid controls
all chute functions
• Easily-adjustable depth shoes
MODEL ES2000
10
MODEL ES2400
STANDARD SPECIFICATIONS
Model
ES1600/TORO
ES2000
ES2400
ES2400XL 1
Stage
2
2
2
Width of Cut
53”
61” / 73” / 79”
73” / 85”
73” / 85”
Cutting Height
22”
29”
36”
36”
Cutting Edge
3/8” x 3” Bolt-on 1/2” x 4” Bolt-on 1/2” x 4” Bolt-on
Skid Shoes
Adjustable
Adj./Hardened
Adj. / Hardened
Auger Diameter
12”
16” Open Flight 18” Open Flight 18” Open Flight
Fan Diameter
12”
20” 4-Blade
24” 4-Blade
24” 4-Blade
Chute Rotation
Hydraulic 270°
Hydraulic 270°
Hydraulic 270°
Hydraulic 270°
Shear Protection
Pressure Relief
Pressure Relief
Pressure Relief
Casting Distance
up to 20’
up to 30’
up to 40’
up to 40’
Approx. Ship. Weight 350/370/NA
850#
1,100#
1,300#
Hoses
Included
Included
Included
Hyd. Flow Req.
11-25 GPM
24-42 GPM
30-50+ GPM
Mounting Plate
Mini Skid Steers/
Universal
Universal
Universal
ASV RC30
1 XL Series for commercial use
AVAILABLE IN...
OPTIONS
ES1600/TORO - 53”
ES2000 - 61”, 73” and 79” models
ES2400 - 73” and 85” models
ES2400XL - 73” and 85” models
• Pistol Grip Control Harness
(required if skid steer is NOT equipped with attachment control)
• Universal Wire Harness
(for skid steers equipped with attachment control)
•
•
•
•
•
•
Hardened Skid Shoes
Urethane Skid Shoes
Protective Urethane Cutting Edge
Truck Loading Chute
Factory Installed Faster Flat-Faced Couplers
Factory Installed Parker Flat-Faced Couplers
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
11
Snow Blower - REAR PULL
Model 601-RP cleans up snow that
has been previously driven on
Start Headin’ in the Right Dir ection...
An easy fit for all tractors is the
standard hand crank chute rotator
901-RP, Erskine’s largest rear pull
with standard hydraulic chute
rotation
12
Founded in 1948, Erskine was one of the first companies to make rotary
snow blowers. The first Erskine snow blowers, commonly known as pull
types or v-plows, were made to fit on the rear of tractors and pulled through
the snow.
Why a rear pull-type snow blower?
The obvious answer is that you don’t have to drive backwards, which is
literally a pain in the neck, but also is not a very safe way to operate
equipment. While being more economical than a front mounted snow
blower the RP (rear pull) still allows you to drive forward while giving you
the option to leave the front loader on the tractor if so desired. The blower
lifts very high with the 3-point, so when a very deep drift is encountered,
the tractor can be turned around and backed into the drift to drag it out.
Also, it can be used on older model tractors without ‘live’ PTO because you
can clear the snow out of the chute before stopping the tractor by simply
raising the 3-point. The new RP series is a 2-stage blower, so it gathers
snow just like the backups. This eliminates the main problem of the old
single stage pull-type blower, which bridged snow across the front of the
blower, preventing it from feeding into the fan.
Optional hydraulic chute rotation for
ease of operation – ideal for tractors
with cabs. Standard on 901 RP
Standard hand crank
chute rotator
(models 601 RP/781 RP)
Large open flight
auger with shear bolt
protection
Efficient 4-blade fan
with shear bolt
protection
Heavy-duty enclosed
drive chain
STANDARD SPECIFICATIONS
AVAILABLE IN...
601 RP - 60” model
781 RP - 78” model
901 RP - 90” model
OPTIONS
• Hydraulic Chute Rotation
(Models 601 RP/781 RP)
• Hydraulic Deflector Control
• Electric Deflector Control
• Hardened Skid Shoes
(Models 601 RP/781 RP,
Standard on 901 RP)
Model
Stage
Cutting Width
Cutting Height
Auger Diameter
Fan Diameter
Discharge Chute
601RP
2
60”
27”
16” Open Flight
20” 4-Blade
Manual
Rotator 1 2
PTO Speed
540 RPM
Casting Distance
up to 30’
Minimum Horsepower
20
Hitch Requirement
Cat. I
Drive Line
14 Series
Cutting Edge
3/8” x 3” Weld-on
Skid Shoes
Adj. & Replaceable
Shipping Weight
840#
781RP
2
78”
29”
16” Open Flight
22” 4-Blade
Manual
Rotator 1 2
540 RPM
up to 35’
30
Cat. I
35 Series
3/8” x 3” Weld-on
Adj. & Replaceable
1050#
901RP
2
90”
32”
18” Open Flight
26” 4-Blade
270° Hydraulic
Rotator 1
540 or 1000 RPM
up to 40’
50
Cat. II or III narrow
35 Series
3/8” x 3” Weld-on
Adj. & Replaceable
1410#
1 Includes deflector & 3-position linkage. Hydraulic or electric is optional. 2 Hydraulic Chute Rotator is optional
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
13
Snow Blower - FRONT MOUNT
On/Off in 5 Minutes!
Fits all tractors with or without
front loader mounting bracket
Model 601-FM
The Erskine QUICK ATTACH
MOUNTING SYSTEM allows for
easy attachment and removal of
blower unit
14
Ready to Blow in Minutes...
Erskine™ Snow Blowers have been proven for over 50 years by people
who need to move snow fast after every snowfall or blizzard. This tough,
dependable blower is built to go day after day. Features quick mount and
dismount along with trouble-free chute rotation in all conditions. The
Erskine™ chews through deep drifts and clears to the bare ground.
We offer several different widths from 60” to 108”, all of which are true
quick attach systems that allow easy on/off attachment in approximately
5 minutes. Standard features include
hydraulic lift and chute rotation, bolt-on
cutting edge, and adjustable skid shoes.
These ruggedly built Erskine Snow Blowers
are second to none in features,
performance, and durability.
The efficient transfer case transfers
power from the rear PTO to the
front mounted snow blower
Model 721-FM
with snow blower
head, frame, and
transfer case
Large open flight
auger with shear bolt
protection
Model 960-FM
No-Freeze-Up Chute
design seals out snow and
freezing slush
Standard hydraulic
orbit motor
chute rotator
Efficient transfer case rotates on
its side providing clearance for
ease of installation and removal
Adjustable frame system
fits all makes/model of
tractors
AVAILABLE IN...
601-FM - 60”
721-FM - 72”
781-FM - 78”
901-FM - 90”
960-FM - 96”
1080-FM - 108”
Efficient 4-blade fan
with shear bolt
protection
Bolt-on, high-carbon
steel cutting edge
Ask Ab
Our 8’ out
rear m and 9’
ount b
lo
models wer
Heavy-duty enclosed
drive chain
OPTIONS
• Electric chute rotator (601-FM) in place of
hydraulic chute rotator
• Hydraulic deflector
• Electric deflector
• Hardened skid shoes (601-FM/721-FM/781-FM)
(Standard on 901-FM/960-FM/1080-FM)
• Optional truck loading chute (901-FM/960-FM/1080-FM)
STANDARD SPECIFICATIONS
Model
Stage
Width of Cut
Cutting Height
Auger Diameter
Fan Diameter
Discharge Chute
PTO Speed
Casting Distance
Minimum Horsepower
Driveline Series
Cutting Edge
Skid Shoes
Shipping Weight
1080-FM
2
108”
36”
12” Top/18” Bottom
30” 4-Blade
210° Hyd Rotator 1 2
540 or 1000 RPM
up to 50’
85
55
5/8” x 6” Bolt-on
Adj. & Replaceable
3300#
960-FM
2
96”
36”
12” Top/18” Bottom
30” 4-Blade
210° Hyd Rotator 1 2
540 or 1000 RPM
up to 50’
85
55
5/8” x 6” Bolt-on
Adj. & Replaceable
3245#
1
901-FM
2
90”
32”
18” Open Flight
26” 4-Blade
270° Hyd Rotator 1 2
540 or 1000 RPM
up to 40’
50
35
1/2” x 4” Bolt-on
Adj. & Replaceable
2250#
781-FM
2
78”
29”
16” Open Flight
22” 4-Blade
270° Hyd Rotator 2
540 RPM
up to 35’
30
35
1/2” x 4” Bolt-on
Adj. & Replaceable
1660#
Truck loading chute with deflector control is optional
721-FM
2
72”
29”
16” Open Flight
22” 4-Blade
270° Hyd Rotator 2
540 RPM
up to 35’
30
35
1/2” x 4” Bolt-on
Adj. & Replaceable
1630#
601-FM
2
60”
27”
16” Open Flight
20” 4-Blade
270° Hyd Rotator 2
540 RPM
up to 30’
20
12
3/8” x 3” Bolt-on
Adj. & Replaceable
1050#
2 Includes deflector & 3-position linkage. Hydraulic or electric is optional.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
15
The Industry Leader in Quality and Customer Service
AUTHORIZED ERSKINE DEALER
P.O. Box 1083 • Alexandria, MN 56308
Toll Free 800-437-6912
Phone 218-687-4045
Fax 218-687-5293
[email protected]
www.erskineattachments.com
V0071607