ADSL ........................................................... 2-1
Transcription
ADSL ........................................................... 2-1
ADSL ........................................................... 2-1 ISDN.......................................................... 2-12 Faceplate-USA ....................................... 2-17 Faceplate-European ............................. 2-24 Baluns ...................................................... 2-39 ADSL ADSL Pots Filter Adapter Con n e c t o r s D e s i g n Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com ADSL T-MOD8-XX ADSL/PSTN Filter Mechanical Specification: Plastic: ABS, UL 94V-0 Cable: 2C flat modular cable Strain-relief: PVC PCB: FR4, UL 94V-0 Plug: 6P2C 3µ" UTP Jack: 6P2C 3µ" UTP Electronics Specification: Pots port impedance: 600Ω Pots tip and ring DC voltage: 0-105V T-MOD 8-01 DC resistance:<50 Impedance: @20Hz and 50Hz ≥ 40KΩ Insulation resistance: DC/100V (A-wire and B-wire) >10MΩ to earth > 25MV Insertion loss: @1KHz < 0.35dB Frequency Response/Insertion loss distortion: The absolute difference between the insertion loss at any frequency in the rang 200Hz to 4000Hz and the insertion loss at 1KHz shall beless than 0.35dB Lsolation (High frequency insertion loss < ADSL band attenuation>): @30KHz to 200KHz > 22dB @200KHz to 1.104KHz > 55dB Return loss (line to phone and phone to line < with Z-HP and without Z-HP >): @200Hz to 500Hz > 12dB @500Hz to 2KHz > 18dB @2KHz to 3.4KHz > 14dB @3.4KHz to 4KHz > 8dB Delay distortion: @200Hz to 4KHz < 200Us Con n e c t o r s D e s i g n Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com ADSL T-MOD6-11UGR ADSL in-line Filter Mechanical Specification: • Plastic: ABS UL 94V-0 • Strain-relief: PVC 5 4 3 2 5 4 3 2 • Cable: UL20251 4C • PCB: FR4, UL 94V-0 • Plug: RJ11 6P4C • Jack: RJ11 6P4C 6μ" gold plating • X'MER: 6.0mH 10P • Capacitance: 0.022uF 275V AC Electrical: • 3dB Cutoff point, line to telephon port, frequency at 12kHz • Attenuation at 20kHz: 9.0 dB 40kHz: 20.0dB • Insertion loss 200Hz to 4kHz: 0.5dB • Pass band ripple 200Hz to 4kHz: +/-0.5dB • D.C resistance: 4.0 ohms max. • Return loss at 1kHz 600 ohms ref.: 27dB Ordering Information: T-MOD 6 - Jack - Plug XX X XX 11 : RJ11x1-RJ11 15 : RJ11x1-RJ45 51 : RJ45x1-RJ11 U : Unshielded S : Shielded BK : Black IV : Ivory GR : Grey T-MOD 6-11 Con n e c t o r s D e s i g n Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com ADSL LINE TA8301 ADSL Microfilter Splitter Box (one to two) T- MOD 5 POTS Filter FOR DSL Mechanical Specification: • Housing & Cover: ABS,UL94V-0 • PCB: FR4, UL94V-0 • Jack: RJ11 6p4c 30μ" gold plating • ICON: ABS,UL94V-0 • HOLDER:ABS,94V-0 Electronic Specification: • 3dB Cutoff point, line to telephone port, frequency at 12kHz • Attenuation at 20kHz: 9.0 dB, 40kHz: 20.0 dB • Insertion Loss 200Hz to 4kHz: 0.5dB • Pass Band Ripple 200Hz to 4kHz: +/-0.5dB • D.C Resistance: 4.0 ohms max. TA8301 (one to two) • Return loss at 1kHz 600 ohms ref.: 27 d Function: Plain Old Telephone Service (POTS) filter allows only voice signals to the subscriber's phone,answering/fax machine and other analog devices while DATA signals pass onto the computer. "PHONE" line (pin 3&4) is conditioned and "ADSL" line (pin 2/5&3/4) is remains clear for DSL compatible devices. Physicals: • Isolate telephone equipment impedance from ADSL and Home Phone Network (HPN) housing wiring • Attenuate ADSL and (HPN) signal to phone equipment to prevent conversion to voice band signal • Minimize voice band interferene-transmission,signaling,and supervision. Con n e c t o r s D e s i g n Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com ADSL TA8311 ADSL Microfilter Box (one to one) T- MOD 5 POTS Filter FOR DSL Mechanical Specification: • Housing & Cover: ABS,UL94V-0 • PCB: FR4, UL94V-0 • Jack: RJ11 6p4c 30μ" gold plating • ICON: ABS,UL94V-0 • HOLDER:ABS,94V-0 Electronic Specification: • 3dB Cutoff point, line to telephone port, frequency at 12kHz • Attenuation at 20kHz: 9.0 dB, 40kHz: 20.0 dB • Insertion Loss 200Hz to 4kHz: 0.5dB • Pass Band Ripple 200Hz to 4kHz: +/-0.5dB • D.C Resistance: 4.0 ohms max. TA8311 (one to one) • Return loss at 1kHz 600 ohms ref.: 27 d Function: Plain Old Telephone Service (POTS) filter allows only voice signals to the subscriber's phone,answering/fax machine and other analog devices while DATA signals pass onto the computer. "PHONE" line (pin 3&4) is conditioned and "ADSL" line (pin 2/5&3/4) is remains clear for DSL compatible devices. Physicals: • Isolate telephone equipment impedance from ADSL and Home Phone Network (HPN) housing wiring • Attenuate ADSL and (HPN) signal to phone equipment to prevent conversion to voice band signal • Minimize voice band interferene-transmission,signaling,and supervision. Con n e c t o r s D e s i g n Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com ADSL PHO NE ADSL PLUG T-MOD E TYPE ADSL MICROFILTER RJ11x2 to RJ11 splitter for DSL phone Features: • FCC Part 68 Registration No.: TBX TAI - 36306-OT-N • Isolate telephone equipment impedance from ADSL and Home Phone Network (HPN) housing wiring. • Attenuate ADSL and (HPN) signal to phone equipment to prevent conversion to voice band signal. • Minimize voice band interference in transmission, signaling, and supervision. Ordering Information: T-MOD 5 - XX 01 05 Con n e c t o r s D e s i g n : : (Plug) (Jack) RJ11 RJ45 RJ11-RJ11 RJ11-RJ45 Telebox Industries Corp. T-MOD 5-01 Patented: TW : 189891 2002/05/11 CN : ZL01211103.1 2002/01/23 TW : M241903 2004/08/21 Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com ADSL T-MODE type ADSL Microfilter RJ11x1 to RJ11 filter for DSL phone Functions: Plain Old Telephone Service (POTS) filter allows only voice signals to the subscriber's phone, answering/fax machine and other analog devices while DATA signals pass onto the computer. "PHONE" line (pin 3&4) is conditioned and "ADSL" line (pin 2/5&3/4) is remained clear for DSL compatible devices. Electronic Specification: • 3dB Cutoff point, line to telephone port, frequency at 12kHz • Attenuation at 20kHz: 9.0dB, 40kHz: 20.0dB • Insertion Loss 200Hz to 4kHz:0.5dB • Pass Band Ripple 200Hz to 4kHz: +/-0.5dB • D.C Resistance: 4.0 ohms max. T-MOD 5-11 • Return loss at 1kHz 600 ohms ref.: 27dB Mechanical Specification: • Housing & Cover:ABS,UL 94V-0 • Cable:UL20251 4C • Strain-relief: PVC, UL 94V-0 • PCB:FR4, UL 94V-0 • Jack: RJ11 6P4C 30μ" gold plating • Plug: RJ11 6P4C 30μ" gold plating Features: • FCC part 68 registration No.: TBX TAI-36306-OT-N • Isolate telephone equipment impedance from ADSL and Home Phone Network (HPN) housing wiring • Attenuate ADSL and (HPN) signal to phone equipment to prevent conversion to voice band signal • Minimize voice band interferene-transmission,signaling,and supervision. Ordering Information: T-MOD 5 - XX 11 : (Plug) (Jack) RJ11 RJ11 Patented: TW : 189891 2002/05/11 CN : ZL01211103.1 2002/01/23 TW : M241903 2004/08/21 Con n e c t o r s D e s i g n Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com ADSL RJ11+BT to BT splitter for ADSL Functions: Plain Old Telephone Service (POTS) filter allows only voice signals to the subscriber's phone, answering/fax machine and other analog devices while DATA signals pass onto the computer. "PHONE" line (pin 3&4) is conditioned and "ADSL" line (pin 2/5&3/4) is remained clear for DSL compatible devices. Electronic Specification: • 3dB Cutoff point, line to telephone port, frequency at 12kHz • Attenuation at 20kHz: 9.0dB, 40kHz: 20.0dB • Insertion Loss 200Hz to 4kHz:0.5dB • Pass Band Ripple 200Hz to 4kHz: +/-0.5dB • D.C Resistance: 4.0 ohms max. T-MOD 5-02 • Return loss at 1kHz 600 ohms ref.: 27dB Mechanical Specification: • Housing & Cover: ABS,UL 94V-0 • Cable: UL20251 4C • Strain-relief: PVC • PCB:FR4, UL 94V-0 • Jack:RJ11 6P4C 30μ" gold plating • Jack: BT 6P4C 30μ" gold plating • Plug: BT 6P4C 30μ" gold plating Features: • Isolate telephone equipment impedance from ADSL and Home Phone Network (HPN) housing wiring • Attenuate ADSL and (HPN) signal to phone equipment to prevent conversion to voice band signal • Minimize voice band interferene-transmission,signaling,and supervision. Ordering Information: T-MOD 5 - XX 02 04 : : (Plug) (Jack) BT TT RJ11-BT RJ11-TT Patented: TW : 189891 2002/05/11 CN : ZL01211103.1 2002/01/23 TW : M241903 2004/08/21 Con n e c t o r s D e s i g n Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com ADSL BT to BT Filter for DSL Phone Functions: Plain Old Telephone Service (POTS) filter allows only voice signals to the subscriber's phone, answering/fax machine and other analog devices while DATA signals pass onto the computer. "PHONE" line (pin 3&4) is conditioned and "ADSL" line (pin 2/5&3/4) is remained clear for DSL compatible devices. Electronic Specification: • 3dB Cutoff point, line to telephone port, frequency at 12kHz • Attenuation at 20kHz: 9.0dB, 40kHz: 20.0dB • Insertion Loss 200Hz to 4kHz:0.5dB • Pass Band Ripple 200Hz to 4kHz: +/-0.5dB • D.C Resistance: 4.0 ohms max. T-MOD 5-22 • Return loss at 1kHz 600 ohms ref.: 27dB Mechanical Specification: • Housing & Cover:ABS,UL 94V-0 • Cable:UL20251 4C • Strain-relief: PVC • PCB:FR4, UL 94V-0 • Jack: BT 6P4C 30μ" gold plating • Plug: BT 6P4C 30μ" gold plating Features: • Isolate telephone equipment impedance from ADSL and Home Phone Network (HPN) housing wiring • Attenuate ADSL and (HPN) signal to phone equipment to prevent conversion to voice band signal • Minimize voice band interferene-transmission,signaling,and supervision. Ordering Information: T-MOD 5 - XX 12 22 : : (Plug) (Jack) BT BT RJ11 BT Patented: TW : 189891 2002/05/11 CN : ZL01211103.1 2002/01/23 TW : M241903 2004/08/21 Con n e c t o r s D e s i g n Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com ADSL TAE filter for DSL phone Functions: Plain Old Telephone Service (POTS) filter allows only voice signals to the subscriber's phone, answering/fax machine and other analog devices while DATA signals pass onto the computer. "PHONE" line (pin 3&4) is conditioned and "ADSL" line (pin 2/5&3/4) is remained clear for DSL compatible devices. Electronic Specification: • 3dB Cutoff point, line to telephone port, frequency at 12kHz • Attenuation at 20kHz: 9.0dB, 40kHz: 20.0dB • Insertion Loss 200Hz to 4kHz:0.5dB • Pass Band Ripple 200Hz to 4kHz: +/-0.5dB • D.C Resistance: 4.0 ohms max. T-MOD 5-03 • Return loss at 1kHz 600 ohms ref.: 27dB Mechanical Specification: • Housing & Cover: ABS,UL 94V-0 • Cable:UL20251 4C • Strain-relief: PVC • PCB: FR4, UL 94V-0 • Jack: RJ11 6P4C 30μ" gold plating • Jack: TAE 6P6C 30μ" gold plating • Plug: TAE 6P4C 30μ" gold plating Features: • Isolate telephone equipment impedance from ADSL and Home Phone Network (HPN) housing wiring • Attenuate ADSL and (HPN) signal to phone equipment to prevent conversion to voice band signal • Minimize voice band interferene-transmission,signaling,and supervision. Ordering Information: T-MOD 5 - XX 03 : (Plug) (Jack) TAE RJ11-TAE Patented: TW : 189891 2002/05/11 CN : ZL01211103.1 2002/01/23 TW : M241903 2004/08/21 Con n e c t o r s D e s i g n Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com ADSL BT to BT Fiter for DSL Phone Functions: Plain Old Telephone Service (POTS) filter allows only voice signals to the subscriber's phone, answering/fax machine and other analog devices while DATA signals pass onto the computer. "PHONE" line (pin 3&4) is conditioned and "ADSL" line (pin 2/5&3/4) is remained clear for DSL compatible devices. Electronic Specification: • 3dB Cutoff point, line to telephone port, frequency at 12kHz • Attenuation at 20kHz: 9.0dB, 40kHz: 20.0dB • Insertion Loss 200Hz to 4kHz:0.5dB • Pass Band Ripple 200Hz to 4kHz: +/-0.5dB • D.C Resistance: 4.0 ohms max. T-MOD 5-33 • Return loss at 1kHz 600 ohms ref.: 27dB Mechanical Specification: • Housing & Cover:ABS,UL 94V-0 • Cable:UL20251 4C • Strain-relief: PVC • PCB:FR4, UL 94V-0 • Jack: TAE 6P6C 30μ" gold plating • Plug: TAE 6P4C 30μ" gold plating Features: • Isolate telephone equipment impedance from ADSL and Home Phone Network (HPN) housing wiring • Attenuate ADSL and (HPN) signal to phone equipment to prevent conversion to voice band signal • Minimize voice band interferene-transmission,signaling,and supervision. Ordering Information: T-MOD 5 - XX 13 33 : : (Plug) (Jack) TAE TAE RJ11 TAE Patented: TW : 189891 2002/05/11 CN : ZL01211103.1 2002/01/23 TW : M241903 2004/08/21 Con n e c t o r s D e s i g n Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com ISDN T-MOD3-UX unshilded / T-MOD3-SX shielded splitter Mechanical Specification: Current rating: 1.5 Amps Insulation resistance: 500 Mohms minimum Contact resistance: 20 mohms maximum DC resistance: 0.1 ohms maximum Plug insertion life: 750 cycles minimum Plug & Jack contact force: 100 grams Plug retention force: 30 lbs minimum Temperature: -40ºF to 150ºF (-40ºC to 68ºC ) Housing: High impact flame retardant plastic, UL 94V-0 rated Spring wire: 50μ"/1.27 μm of gold over 100μ"/2.54μm of nickel RJ45 Shielded plug: TA5708FS plug cover: TA5608 T-MOD 3 RJ45 Shielded jack: MJ0543-88S RJ45 Unshielded plug: TA2788 plug cover: TA5608 RJ45 Unshielded jack: MJ0543-88 Con n e c t o r s D e s i g n Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com ISDN T-MOD 3 wiring diagram and labling Description: Ordering Information: P/N: T-Mod3-U1 P/N: T-Mod3-S1 Splites a 4-pair USOC jack, pairs 1 & 2 to jack 1 and pairs 3 & 4 to jack 2, for Token Ring or voice applications at either jack. P/N: T-Mod3-U2 P/N: T-Mod3-S2 Splites a 4-pair T568B jack, pairs 1 & 2 to jack 1 and pairs 3 & 4 to jack 2, for Token Ring or voice applications at either jack. P/N: T-Mod3-U3 P/N: T-Mod3-S3 Splites a 4-pair T568A/T568B jack, pairs 2 & 3 to jack 1and pairs 1 & 4 to jack 2, for Token Ring or voice applications at either jack. P/N: T-Mod3-U4 P/N: T-Mod3-S4 Splites a 4-pair T568A/T568B jack, pairs 2 & 3 to jack 1and pairs 1 & 4 to jack 2, for 10BASE-T ( jack 1) and Token Ring or voice applications ( jack 2). P/N: T-Mod3-U5 P/N: T-Mod3-S5 Splites a 4-pair T568A/T568B jack, pairs 2 & 3 to jack 1and pairs 1 & 4 to jack 2, for 10BASE-T applications at either jack. P/N: T-Mod3-U6 P/N: T-Mod3-S6 Splites a 4-pair T568B jack, pairs 1, 2 and 3 to jack 1 (356A) and pairs 4 to jack 2, for 1, 2 or 3 pairs voice/modem ( jack 2). P/N: T-Mod3-U7 P/N: T-Mod3-S7 Bridges all jack pairs. Compatible with any jack wiring. Provides an additional 4-pair jack with the same wiring. Con n e c t o r s D e s i g n Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com ISDN T-MOD 3 option wiring diagram P/N: T-Mod3-U201 unshielded T-Mod3-S201 shielded P/N: T-Mod3-U501 unshielded P/N: T-Mod3-U502 unshielded T-Mod3-S501 shielded P/N: T-Mod3-U701 unshielded P/N: T-Mod3-U9 unshielded P/N: T-Mod3-S8 shielded P/N: T-Mod3-S9 shielded P/N: T-Mod3-S10 shielded P/N: T-Mod3-S11 shielded P/N: T-Mod3-U11 unshielded P/N: T-Mod3-U13 unshielded Con n e c t o r s D e s i g n Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com ISDN T-MOD 4 Housing dimension: L105 X W43.5 X H27-20mm (slope) T-Mod 4 with cable Housing dimension: L105 X W43.5 X H27-20mm (slope) T-Mod 4 compact box Ordering Information: T-MOD4 - X X XX U : Unshielded S : Shielded 1. RJ45 to RJ45X4 (with side-entry cable) 2. RJ45 to 8P2CX4 (with side-entry cable) 3. RJ45 to RJ45X4 (with side-entry cable) 4. RJ45 to 8P2CX4 (with side-entry cable) IV : Ivory WH : White Wiring Diagram and labeling Con n e c t o r s D e s i g n Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com ISDN TA27T ISDN Terminator TA27T Important features • Designed for ISDN S-BUS services. • Uses 100ohms, 1/4W resistorX 2 • 4-pair,8-position plug:active pin 3-6 and 4-5. • Part No.:TA27T Con n e c t o r s D e s i g n Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com Faceplates-USA TA680X/TA681X USA type keystone jack faceplate Material: 1. Housing: High-Impact, Self-Extinguishing plastic rated UL 94V-0. 2. Screws: Nickel-plated steel. 3. Standard color: Ivory(IV) and White(WH). 4. 1 Unit includes 2-Screw. Ordering Information: TA680 X TA Faceplate (w/o icon) 0 : Blank 1 : 1 Port 2 : 2 Ports 3 : 3 Ports 4 : 4 Ports 6 : 6 Ports Con n e c t o r s D e s i g n - XX I V : Ivory WH : White GR : Grey Telebox Industries Corp. TA680X Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com Faceplates-USA TA681X/TA681X USA type Keystone Jack Faceplate Material: 1. Housing: High-Impact, Self-Extinguishing plastic rated UL 94V-0. 2. Screws: Nickel-plated steel. 3. Standard color: Ivory(IV) and White(WH). 4. 1 Unit includes 2-Screw. Ordering Information: TA680 X TA Faceplate (With icon) 0 : Blank 1 : 1 Port 2 : 2 Ports 3 : 3 Ports 4 : 4 Ports 6 : 6 Ports Con n e c t o r s D e s i g n - XX I V : Ivory WH : White GR : Grey Telebox Industries Corp. TA680X Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com Faceplates-USA TA551X USA type Keystone Jack Faceplate Material: 1. Housing: High-Impact, Self-Extinguishing plastic rated UL 94V-0. 2. Screws: Nickel-plated steel. 3. Standard color: Ivory(IV) and White(WH). 4. 1 Unit includes 2*Screw, 2*Write-on paper and 2 transparent covers Ordering Information: TA55 RJ faceplate X X Type of gang 1: Single gang 2: Double gang 0 : Blank 1 : 1 Port 2 : 2 Ports 3 : 3 Ports 4 : 4 Ports 6 : 6 Ports 8 : 8 Ports - XX I V : Ivory WH : White GR : Grey TA551X Note: Single gang are not available in 8 ports Con n e c t o r s D e s i g n Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com Faceplates-USA TA552X USA type Keystone Jack Faceplate Material: 1. Housing: High-Impact, Self-Extinguishing plastic rated UL 94V-0. 2. Screws: Nickel-plated steel. 3. Standard color: Ivory(IV) and White(WH). 4. 1 Unit includes 2*Screw, 2*Write-on paper and 2 transparent covers Ordering Information: TA55 RJ faceplate X X Type of gang 1: Single gang 2: Double gang 0 : Blank 1 : 1 Port 2 : 2 Ports 3 : 3 Ports 4 : 4 Ports 6 : 6 Ports 8 : 8 Ports - XX I V : Ivory WH : White GR : Grey TA552X Note: Single gang are not available in 8 ports Con n e c t o r s D e s i g n Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com Faceplates-USA TA518X USA type Keystone Jack Faceplate with Shuttler TA5181-WH TA5182-WH Material: Plate & screw insert : ABS, UL 94V-0 Color: White & Ivory Screws: 6#(3.3mm)x 25mm Ordering Information: TA518 1 : 1 PORT 2 : 2 PORTS 4 : 4 PORTS TA5184 Con n e c t o r s X D e s i g n Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 - XX I V : Ivory WH : White http:// www.telebox.com Faceplates-USA TA3700-X USA type wallplate for keystone jack TA3700-1 TA3700-2 TA3700-3 TA3700-4 TA3700-6 TA3700-F TA3700-B for one keystone jack for two keysytone jacks for three keysyone jacks for four keystone jacks for six keystone jacks Insert for F81 coaxial Blank insert TA3700-X Insert Con n e c t o r s D e s i g n Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com Faceplates-USA TA4709 USA type Backbox Back box: The Backbox is designed to mount on the wall or other surface-mount. Provides convenient rear and side knock-outs for coax or fiber optical cable entries. Each unit includes screws and double-sided adhesive tape for mounting, rubber-door and cable tie. TA4709 Con n e c t o r s D e s i g n Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com Faceplate-European TA23XA-WH UK type keystone jack frame Specifications: 1. High impact flame retardant Plastic,UL 94V-0 2. Outside process: Texture TA23XA-WH TA5215D-WH Con n e c t o r s D e s i g n Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com Faceplate-European TA5101 Center Plate German Outlet Plate: ABS, UL 94V-0. TA5101 Color: White & Ivory. ID paper: White. ID cover: Clear, ABS. Screw: 4#x16x2 pcs. TA5102 Center Frame for German Outlet (Se type) For Setec or Telebox TA251XX wall outlets TA5102 TA5103 Center Frame for German Outlet (Ru type) 1.Jung / Merten / Gira type compatoble TA5103 2.for Rutenbeck or Telebox TA252XX wall outlet Con n e c t o r s D e s i g n Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com Faceplate-European TA5105-2WH03 UK Single Gang Bevelled Faceplate Specifications: 1. Plastics Faceplate: High-impact, self-extinguidhing plastic rated UL 94V-0. 2. Screw: Nickel-Plated Steel TA5105-2WH03 Con n e c t o r s D e s i g n Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com Faceplate-European TA5105-2XX British beveled faceplate (86x86) Ordering Information: TA5105 - X XX 2 : 86x86 mm Version 4 : 86x146 mm Version I V : Ivory WH : White TA5105-2XX TA5105-4XX British beveled faceplate 2 Gang (86x146) TA5105-4XX Ordering Information: TA5105 - X XX 2 : 86x86 mm Version 4 : 86x146 mm Version Con n e c t o r s D e s i g n I V : Ivory WH : White Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com Faceplate-European TA511X European Keystone Jack Faceplate 80x80 TA5111-XX TA5112-XX 2*Inser 2*Screw Material: 1. Housing: High-impact, Self-extinguishing plastic rated UL 94V-0. 2. Screws: Nickel-plated steel, machine screw 4mmT X 15mmL 3. Standard color: Ivory(IV) and White(WH). 4. 1 Unit includes 2*Screw, 2*Insert. Ordering Information: TA511 X One Gang 1 : 1-port 2 : 2-port - XX I V : Ivory WH : White TA5111 TA5112 Con n e c t o r s D e s i g n Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com Faceplate-European TA512X European Keystone Jack Faceplate 80X80 With Icon TA5121-XX 2*Clear Cover TA5122-XX 2*Wirte on Pape 2*Screw Data & Voice Ic Material: 1. Housing: High-impact, Self-extinguishing plastic rated UL 94V-0. 2. Screws: Nickel-plated steel, machine screw 4mmT X 15mmL 3. Standard color: Ivory(IV) and White(WH). 4. 1 Unit includes 2*Screw, 2*Insert. Ordering Information: TA512 X One Gang 1 : 1-port 2 : 2-port - XX I V : Ivory WH : White TA5121 TA5122 Con n e c t o r s D e s i g n Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com Faceplate-European TA513X British type Keystone Jack Faceplate 86X86 TA5131-XX TA5132-XX 2*Inser 2*Screw Material: 1. Housing: High-impact, Self-extinguishing plastic rated UL 94V-0. 2. Screws: Nickel-plated steel, machine screw 3.5mmT X 25mmL 3. Standard color: Ivory(IV) and White(WH). 4. Unit includes 2*Screw, 2*Insert. Ordering Information: TA513 X One Gang 1 : 1-port 2 : 2-port - XX I V : Ivory WH : White TA5131 TA5132 Con n e c t o r s D e s i g n Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com Faceplate-European TA514X British type Keystone Jack Faceplate 86X86 with Icon TA5141-XX TA5142-XX 2*Clear Cover 2*Wirte on Pap 2*Screw Data & Voice Ic Material: 1. Housing: High-impact, Self-extinguishing plastic rated UL 94V-0. 2. Screws: Nickel-plated steel, machine screw 3.5mmT X 25mmL 3. Standard color: Ivory(IV) and White(WH). 4. Unit includes 2*Screw, 2*Insert. Ordering Information: TA514 X One Gang 1 : 1-port 2 : 2-port - XX I V : Ivory WH : White TA5141 TA5142 Con n e c t o r s D e s i g n Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com Faceplate-European TA515X British Type Keystone Jack Faceplate 86x86 TA5151 TA5152 TA5154 Ordering Information: TA515 X 1 : 1-port 2 : 2-port 4 : 4-port Con n e c t o r s D e s i g n - XX WH : White Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com Faceplate-European TA516X 45-Degree British type wallplate family series 45 degree Keystone adapter 45 degree ST connector adapter 45 degree SC connector adapter Part No. TA516A-WH w/o Icon Part No. TA516C-WH w/o Icon Part No. TA516E-WH w/o Icon TA516B-WH with Icon TA516D-WH with Icon 45 degree Blank adapter Icon blank Part No. TA516X-WH Icon tel- mark TA516F-WH with Icon Icon computer-mark Ordering Information: TA516 X - 1:1-port wallplate 2:2-port wallplate 3:3-port wallplate 4:4-port wallplate A: RJ45 Jack Insert (w/o icon) B: RJ45 Jack Insert (w/o icon) C: SC Insert (w/o icon) D: SC Insert (w/o icon E: ST Insert (w/o icon) F: ST Insert (w/o icon) X: Blank Insert Con n e c t o r s D e s i g n XX Color Code WH:White(309) Telebox Industries Corp. • Single gang two ports UK wallplate 86x86mm with cutout 50x50mm • Double gang four ports UK wallplate 86x146mm with cutout 50x100mm • RJ45 insert shutter dust cover • Option for icon and different Inserts • UL Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com Faceplate-European TA5162 45-degree British Wallplate Family Series TA5162 Part No. TA5162-WH Single Gang 2 Port Faceplate U.K. Style (50mm x 50mm) 45 degree angled walloutlet provides applealing appearance and fits into structure cabling dimension. Choices of snap-in modules of RJ45 jack, BNC & F type connector, ST and SC fiber adaptors provide different wiring system application. • 45degree keystone adaptor • 45degree SC connector adaptor • 45degree ST connector adaptor • Blank adaptor • Single Gang 3 port faceplate U.S. Style • Single Gang 2 port faceplate U.K. Style (50mm x 50mm) • Double Gang 4 port faceplate U.K. Style (100mm x 50mm) • Icons Ordering Information: TA516 X - 1 : 1-port wallplate 2 : 2-port wallplate 3 : 3-port wallplate 4 : 4-port wallplate A : RJ45 Jack Insert (w/o icon) B : RJ45 Jack Insert (with icon) C : SC Insert (w/o icon) D : SC Insert (with icon) E : ST Insert (w/o icon) F : ST Insert (with icon) X : Blank Insert Con n e c t o r s D e s i g n XX COLOR CODE WH:WHITE(309) Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com Faceplate-European TA5164 45-degree British type Wallplate Family Series TA5151 Part No. TA5164-WH Double Gang 4 Port Faceplate U.K. Style (100mm x 50mm) Ordering Information: TA516 X - 1 : 1-port wallplate 2 : 2-port wallplate 3 : 3-port wallplate 4 : 4-port wallplate A : RJ45 Jack Insert (w/o icon) B : RJ45 Jack Insert (with icon) C : SC Insert (w/o icon) D : SC Insert (with icon) E : ST Insert (w/o icon) F : ST Insert (with icon) X : Blank Insert Con n e c t o r s D e s i g n Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 XX COLOR CODE WH:WHITE(309) http:// www.telebox.com Faceplate-European TA517X French Wallplate (81x81) Features: • Single gang plate with 46 x 46 cutout for French snap-in modules • Interchangeable between 45 x 45 and 45 x 22.5 jack module • RJ45 insert shutter dust cover • Color coded ring for networking control • UL Ordering Information: TA517 X - 1 : Wallplate 2 : Wallplate w/station ID Con n e c t o r s D e s i g n XX WH : White Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com Faceplate-European TA517X French wallplate (81x81) insert & color ring Features: • Single gang plate with 46 x 46 cutout for French snap-in modules • Interchangeable between 45 x 45 and 45 x 22.5 jack module • RJ45 insert shutter dust cover • Color coded ring for networking control • UL TA5162 TA5173 TA517A TA517D TA517F TA517E TA517B TA517X Ordering Information: TA517 X - 3 : 45X45 RJ45 Insert 4 : 45X45 Insert color ring 5 : 45X22.5 Insert color ring A : RJ45 JACK 45X22.5 Insert XX WH : White GN : Green RD : Red YL : Yellow B : F TV CONN 45X22.5 Insert C : 1-BNC CONN 45X22.5 Insert D : 2-BNC CONN 45X22.5 Insert E : 1-ST CONN 45X22.5 Insert F : 2-ST CONN 45X22.5 Insert X : Blank 45x22.5 Insert Con n e c t o r s D e s i g n Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com Faceplate-European TA5215D-WH UK Single Gang Backbox Material: 1. Plastics Faceplate: High-impact, self-extinguidhing plastic rated UL 94V-0. 2. Screw: M3.5 NUT Brass TA5215D-WH Con n e c t o r s D e s i g n Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com Baluns Why Baluns? When network equipment and teminals are equipped with different type of cable and connectors. It makes the direct connection a problem. For example, using cable like coaxial, twinaxial, STP or UTP is not possible to terminate to different connectors like BNC, Twinaxial, or RJ45. Balun (Balanced-unbalanced) is created to match different cableimpedance and connectors. A good Balun should be able to match the cabling system's impedance and attenuation, and minimize signal distortion. Types of Baluns: 1. Balun: To connect balanced transmisson lines (such as UTP cable) with unbalanced transmission lines (such as coaxial cable). Inside the Balun is a transformer which can be used to step up or down both the AC voltage and the AC current, and it provides a means of isolating electrical circuit. For example a Balun can match IBM STP cable (150 ohm balanced) with a coaxial cable of IBM3270 terminals (93 ohm unbalanced). 2. Impedance Matching Device (IMD) Both lines are balanced, but different impedance . For example, IBM Cabling System (150 ohm balanced) needs to attach to a 10Base-T terminal (100 ohm balanced). 3. Adapter: Adapters do not contain transformers. They provide mechanical adaption and electrical contact between two types of connects UTP with RJ45 modular connector (100 ohm balanced). Features: The Video Balun allows CCTV video signals to be transmitted via versatile UTP cabling. The video balun eliminates costly and bulky coax cable, allowing CCTV security and surveillance equipment to be connected to any convenient modular outlet. Con n e c t o r s D e s i g n Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com Baluns BL3295 CCTV Video Balun with Flip-Top IDC Connector BL3295 BL3295 BL3295 BL3295 Multiplexer (MUX) Toolless make things easier for you!!! ● Allows maximum distance of color video upto 2200 ft (671m) of Cat.5 UTP cable. ● Easy and fast installation ● Includes surge protection 40mm ● Converts Bi-directional signal ● Compact enclosure ● Support NTSC, PAL, and SECAM systems ● Limited Lifetime warranty Specification: Environment TV (CCTV) equipment for security and surveillance. Bandwidth Video: DC to 8MHz Maximum Input 1.1vp-p Impedance Input: 75 ohms (BNC) ; Output: 100 ohms (Toolless Connector) Insertion Loss <1 dB, Frequency range from DC to 8 MHz Return Loss -20dB, Frequency range from DC to 8 MHz Common Mode Rejection -50dB, Frequency range from DC to 8 MHz Max. Distance Color Cat.3 --- 1200 ft (365m) ; Cat.5 --- 2200 ft (670m) Max. Distance B&W Cat.3 --- 1500 ft (457m) ; Cat.5 --- 2500 ft (762m) Cable - BNC Impedance: 75 ohms at 1 MHz (RG59/U). Maximum 25 ft coax allowed per end to end link. Cable - UTP 24 gauge or lower solid copper twisted pair wire impedance: 100 ohms at 1 MHz. Maximum capacitance: 20 pf/foot Attenuation: 6.6dB/1000 ft at 1 MHz Temperature Operating: 0 to 55°C ; Storage: -20 to 85°C Humidity Up to 95% non condensing Connectors Input: (BNC) female ; Output: toolless connector Enclosure Fire retardant plastic, UL 94V-0 Warranty Limited lifetime Dimensions Size: 54.6mm(L) x 17mm(W)x 14.6mm(H) Con n e c t o r s D e s i g n Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com Baluns BL3285 CCTV Video Balun with BNC to Toolless Connector BL3285 BL3285 BL3285 BL3285 Multiplexer (MUX) Toolless make things easier for you!!! ● Allows maximum distance of color video upto 2200 ft (671m) of Cat.5 UTP cable. ● Easy and fast installation ● Includes surge protection ● Converts Bi-directional signal ● Compact enclosure ● Support NTSC, PAL, and SECAM systems ● Limited Lifetime warranty Specification: Environment TV (CCTV) equipment for security and surveillance. Bandwidth Video: DC to 8MHz Maximum Input 1.1vp-p Impedance Input: 75 ohms (BNC) ; Output: 100 ohms (Toolless Connector) Insertion Loss <1 dB, Frequency range from DC to 8 MHz Return Loss -20dB, Frequency range from DC to 8 MHz Common Mode Rejection -50dB, Frequency range from DC to 8 MHz Max. Distance Color Cat.3 --- 1200 ft (365m) ; Cat.5 --- 2200 ft (670m) Max. Distance B&W Cat.3 --- 1500 ft (457m) ; Cat.5 --- 2500 ft (762m) Cable - BNC Impedance: 75 ohms at 1 MHz (RG59/U). Maximum 25 ft coax allowed per end to end link. Cable - UTP 24 gauge or lower solid copper twisted pair wire impedance: 100 ohms at 1 MHz. Maximum capacitance: 20 pf/foot Attenuation: 6.6dB/1000 ft at 1 MHz Temperature Operating: 0 to 55°C ; Storage: -20 to 85°C Humidity Up to 95% non condensing Connectors Input: (BNC) female ; Output: toolless connector Enclosure Fire retardant plastic, UL 94V-0 Warranty Limited lifetime Dimensions Size: 54.6mm(L) x 17mm(W)x 14.6mm(H) Con n e c t o r s D e s i g n Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com Baluns PH1621 16-port Passive Video Transceiver Hub BL3295 BL3295 Multiplexer (MUX) BL3295 Perfect for larger CCTV installations! • Allows maximum distance of color video over 1000 ft (305m) of Cat.5 UTP cable. • Includes surge protection • Support NTSC, PAL, and SECAM systems • Coexists with qualified camera with built-in UTP transmitter • Includes female BNC and detachable terminal blocks • Includes 16 two-foot coax Jumper Cables • Limited Lifetime warranty Applications: Security and Surveillance Department Store Security Casino Security Hospitals and Airports School Campuses Specification: Frequency response DC to 5MHz Common Mode Rejection -60dB, Frequency range from 15KHz to 5MHz Insertion Loss <2dB, Frequency range from 15KHz to 5MHz Impedance 75 ohms (Coaxial, BNC female --RG59/U) Impedance 100 ohms (Network Wiring: 16~24gauge UTP twisted pair wire) Temperature Operating: 0 to 55ºC; Storage: -20 to 75ºC Humidity Up to 95% Con n e c t o r s D e s i g n Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com Baluns BL3215 Video Balun 75Ω to 100 BNC Plug to RJ45 Unshilded Jack Specification: Transmission bandwidth Transmission distance DC (50Hz) to 8MHz 400 metres (24 AWG UTP) MAX. Insertion loss Signal return loss Signal voltage <0.5dB ≥-20dB 0.5 to 1.5V rms Part No.: BL3215 Video balun BNC male 75Ω-100Ω Bandwidth Video: DC to 8 MHz. Impedance BNC side: 75 ohms RJ45 side: 100 ohms UTP cat 5: 24 gauge or lower solid copper Cable BL3215 BNC M twisted pair wire. Impedance: Distance Connectors Environment RF characteristics 100 ohms at 1MHz Capacitance max: 15pF/foot Attenuation: 6.6 dB/1000 ft at 1 MHz Coax: 75 ohms, RG type or eq. TV color (Cat 3 ) 1200 feet (2400 Max) B&W (Cat 3) 2200 feet (4400 Max) TV color (Cat5): 1500 feet (3000 Max) B&W (Cat 5): 2500 feet (5000 Max) Coax: 25 ft inclusive to distance BNC female: 75 ohms RJ45 jack: Active pins 7&8 Storage: -20 to 85 Operating temperature: 0 to 55 Humidity ESD: 95% non condensing Insertion Loss Max: 2 dB from DC to 8MHz Return Loss min: 14 dB from DC to 8MHz Max. Amplitude: 1.1 Vpp CMRR min: -54 dB Size LxWxH: 2.2 x 0.75 x 1.2 Mass : 0.84 oz typ. (24gm) Mounting: float Warranty Limited: Life Regulatory FCC Mechanical Flammability Con n e c t o r s D e s i g n 94V-0 Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com Baluns BL7126/BL7256 G703 Balun 75Ω to 120Ω BNC-1.6/5.6 to RJ45 BL7126 1.6/5.6F BNC M BL7526 BL7126 G703 is the connection standard for E1 services in Europe. This balun is similar to T1 or DDS standards in the USA. This interface standard is used throughout the world to specify the physical and electrical characteristics, which enable the interconnection of digital network components. This balun converts 75 ohms G703 transmit signals to 120 ohms signals for transmission over network, or reception by a CPE. It also converts 120 ohms G703 transmit signals to 75 ohms signals. BL7526 Part No.: BL7126 BL7526 G703 balun BNC to RJ45 G703 balun 1.6/5.6 to RJ45 Specification: • Allows maximum distance of color video upto 2200 ft (671m) of Cat.5 UTP cable. • Includes surge protection • Converts Bi-directional signal • Compact enclosure • Support NTSC, PAL, and SECAM systems • Limited Lifetime warranty Features: • • • • • • High Reliability and Durability Bi-directional signal conversion Miniature enclosure Standard or custom configuration Low cost, high quality and performance Passive Device (No power supply required) Con n e c t o r s D e s i g n Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com Baluns BL6116 G703 Balun Panel type BNC 75Ω to 120Ω Jack to RJ45 BL6116 BL6116 G703 Transmission Baluns 75/100 and 75/120Ω impedance matching baluns allow users to use inexpensive STP cabling in place of expensive coax cabling. Especially useful in telecommunication application for patching the distribution frame. Units meet CCITT Recommendation G703 and are great for America or European application. BNC M G703 baluns in T1/E1 Communication systems The T1 line is the most widely used switched digital communication circuit used in America today. T1 are used for connecting phone and computer networks to public switched network infrastructures. Each T1 is equivalent to 24 64Kbps communication channels. Each Channel utilizes two 100Ω shielded twisted pairs; one for transmit (TX) and one for receive (RX). Some T1 equipment uses two 75Ω coax connections for the TX and RX channels. Baluns are used to bridge the gap between 75Ω coax and 100Ω Twisted pair. An E1 Circuit is the European equivalent of the American T1. The Infrastructure use 120Ω shielded twisted pairs so 75/120 baluns would be used in European application. T1 - E1 DIFFERENCES Standards Name #64K Channels TWISTED Pairs Type COAX TYPE USA Standard T1 24 2X100Ω STP (RJ45) 75Ω (BNC type) European Standard E1 32 2X120Ω STP (RJ45) 75Ω (BNC, 1.6/5.6 type) Con n e c t o r s D e s i g n Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com Baluns BL7426 G703 balun 75Ω to 120Ω DB15 male to RJ45 shielded jack BL7426 • Data rates to 2.048 Mbps • 75Ω dual coax to 120Ω twisted pair • Bi-Directional signal conversion • No AC power or batteries needed • Ultra-mininature enclosure Part No.: BL7426 DB15 male to RJ45 jack G703 balun 75Ω to 120Ω BL7426 DM15M Con n e c t o r s D e s i g n Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com Baluns BL7A26/BL7E26 G703 balun 75Ω to 120Ω dual BNC-1.6/5.6 to RJ45 BL7A26 BL7E26 BL7E26 BNC F+F 1.6/5.6 F+F BL7A26 BL7A26 BNC F+F Specification: • Data rate to 2.048 Mbps • 75Ω dual coax to 120Ω twisted pair • Meets or exceeds CCITT recommendation G703 Specification and IEEE Standards • Female BNC connectors to RJ45 • Male BNC connectors to RJ45 • 1.6/5.6 DIN connectors to RJ45 • Cable Length 6" Standard. Custom length available Features: • • • • • • High Reliability and Durability Bi-directional signal conversion Miniature enclosure Standard or custom configuration Low cost, high quality and performance Passive Device (No power supply required) Con n e c t o r s D e s i g n Telebox Industries Corp. G703 is the connection standard for E1 services in Europe. This balun is similar to T1 or DDS standards in the USA. This interface standard is used throughout the world to specify the physical and electrical characteristics, which enable the interconnection of digital network components. This balun converts 75Ω G703 transmit signals to 120Ω signals for transmission over network, or reception by a CPE. It also converts 120Ω G703 transmit signals to 75Ω signals. Part No.: BL7A26 G703 balun dual BNC to RJ45 BL7E26 G703 balun dual 1.6/5.6 to RJ45 Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com Baluns BL7B26-6/BL7F26-6 G703 balun 75Ω to 120Ω dual BNC-1.6/5.6 to RJ45 with cable BL7B26-6 BL7F26-6 G703 is the connection standard for E1 services in Europe. This balun is similar to T1 or DDS standards in the USA. This interface standard is used throughout the world to specify the physical and electrical characteristics, which enable the interconnection of digital network components. This balun converts 75Ω G703 transmit signals to 120Ωsignals for transmission over network, or reception by a CPE. It also converts 120Ω G703 transmit signals to 75Ω signals. BL7B26-6 1.6/5.6 M+M BNC M+M BL7F26-6 Ordering information: Specification: • Data rate to 2.048 Mbps • 75Ω dual coax to 120Ω twisted pair • Meets or exceeds CCITT recommendation G703 Specification and IEEE Standards • Female BNC connectors to RJ45 • Male BNC connectors to RJ45 • 1.6/5.6 DIN connectors to RJ45 • Cable Length 6" Standard. Custom length available Features: • • • • • • High Reliability and Durability Bi-directional signal conversion Miniature enclosure Standard or custom configuration Low cost, high quality and performance Passive Device (No power supply required) Con n e c t o r s D e s i g n Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com Baluns IBM Balun IBM coax to twisted pair balun IBM twinax to ywisted pair adapter IB 1103 RJ11/PIN3/4 IB 1104 RJ45/PIN4/5 IB 1203 RJ11/PIN3/4 IB 1204 RJ45/PIN4/5 Con n e c t o r s D e s i g n Telebox Industries Corp. Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com Baluns IBM 3270 Balun Specification: RG62A/U coaxial 93 ohm to RJ11/RJ45 UTP 100 ohm Application: IBM 3270 and 3174 Category A dervices Data rate: 0.5-5M bps Insertion Loss: Less than 0.8db over 100KHz-5MHz Return Loss: -20db min. Operating distance: 1000ft/305m max. on 22/24 AWG cable IBM 3270 Balun Coax (BNC) Balun Connects between IBM 3270 and 3174 CU use UTP cabling. Part No. Spec: Active pin Wiring configuration BL1311-A BNC(M)/RJ11(6P2C) Pin 3 & 4 IBM BL1311-B BNC(M)/RJ11(6P2C) Pin 2 & 5 ROLM BL1211-A BNC(F)/RJ11(6P2C) Pin 3 & 4 IBM BL1211-B BNC(F)/RJ11(6P2C) Pin 2 & 5 ROLM BL1111-A BNC(M)/RJ45(8P2C) Pin 4 & 5 IBM BL1111-B BNC(M)/RJ45(8P4C) Pin 2 & 1 AT&T 7.8NC BL1011-A BNC(F)/RJ45(8P2C) Pin 4 & 5 IBM BL1011-B BNC(F)/RJ45(8P4C) Pin 2 & 1 AT&T 7.8NC • (A)100Ω to 100Ω (B)150Ω to 100Ω BL1X 1X-X X " " : W/O Screw A : IBM 1 : Standard 0 : F-RJ45 2 : F-RJ11 Con n e c t o r s D e s i g n Telebox Industries Corp. Tel:+886-2-26429337 S : W/Screw B : Others 2 : Special wiring 1 : M-RJ45 3 : M-RJ11 Fax:+886-2 -26425779 http:// www.telebox.com Baluns IBM AS/400 Balun Specification: 100 ohm Twinax cabling UL style 2498 to RJ11/RJ45 UTP 100 ohm Application: IBM AS/400 and 5250 system Data Rate: 0.5-5m bps Insertion Loss: Less than 0.8 db over 100KHz-5MHz Return Loss: -20db min. Operating distance: 1000ft/305m max. on 22/24 AWG UTP cable IBM AS/400 Balun Twinax balun connects between AS/400 host and peripherals using UTP cabling. Active pin Wiring configuration Part No. Spec: BL1811 Twinax(M)/RJ11(6P2C) Pin 3 & 4 IBM BL1711 Twinax(F)/RJ11(6P2C) Pin 3 & 4 IBM BL1611 Twinax(M)/RJ45(8P2C) Pin 4 & 5 IBM BL1511 Twinax(F)/RJ45(8P2C) Pin 4 & 5 IBM BL2011 Twinax(M) or (F) to RJ11 with 15.24mm(6 inches) cable BL1911 Twinax(M) or (F) to RJ45 with 15.24mm(6 inches) cable • (A)100Ω to 100Ω (B)150Ω to 100Ω BL1 X 1X - X " " : W/O Screw 1 : Standard 5 : F-RJ45 7 : F-RJ11 9 : M/F-RJ45+Cable Con n e c t o r s D e s i g n Telebox Industries Corp. Tel:+886-2-26429337 S : W/Screw 2 : Special wiring 6 : M-RJ45 8 : M-RJ11 20 : M/F-RJ11+Cable Fax:+886-2 -26425779 http:// www.telebox.com Baluns WANG Balun Specification: RG59U BNC/TNC pair, 75 ohm to RJ11/RJ45 100 ohm Application: Wang VS system and OIS devices Data rate: 0.5-10M bps Insertion Loss: 0.8db Operating distance: 400ft/122m max. on 22/24 AWG UTP cable Wang Balun connects Wang VS and OIS devices using UTP cabling Part No. Desp. (Coax Conn. male only) BL2111-A RJ11(6P2C) BNC 3 Active SIG. Pin Shld Wiring configuration NWS 4 BL2111-B BL2111-C BL2112 RJ11(6P4C) BNC 2 1 5 6 RJ11(6P4C) BNC 3 2 4 5 RJ45(8P2C) BNC 4 ROLM NWS NWS 5 Con n e c t o r s D e s i g n Telebox Industries Corp. BL2211-A RJ11(6P4C) to BNC/TNC with 15.24mm(6 inches) cable BL2211-B RJ45(8P2C) to BNC/TNC with 15.24mm(6 inches) cable Tel:+886-2-26429337 Fax:+886-2 -26425779 http:// www.telebox.com