kim stahlmöbel ag dreidimensionale objekte

AAA
Funktional und ästhetisch.
Der hydraulische Tisch Cavalletto verbindet
Funktionalität mit klassischer Ästhetik. Sein
Aussehen erinnert an die klassischen Studiotische der 50er-Jahre. Die Unterkonstruktion
aus schwarz gepulvertem Stahl trägt jede
Last. Bezüglich Länge und Material des Tischblattes sind beinahe keine Grenzen gesetzt.
Das Geniale am Cavalletto ist seine hydraulisch verstellbare Höhe. So lässt es sich auch
im Stehen effizient arbeiten. Von den ersten
Gestaltungsentwürfen bis zu den Konstruktionszeichnungen zeichnen die Produktdesigner von Hauser & Partner verantwortlich.
Ut audanimustia eaquibus Natur
quos ditatis eost, et lam ut et pore voloreptia
voleste nimoluptur ratur sus ullupnti reperuptae volor repudis doluptatur reprore re, alia
vent eumquam quosapelit quuntorrovit que
conse sanihictemod ulpa vidus inisque si sit
quis volute qui tempore verumet magnamus
aut aut della sed quo officimus veliquam
rerum vendanducium fuga. Ibus vero quae
volori totatis magnim vo
Ut audanimustia eaquibus Natur
lorro videbita nus, ium resti voluptatiae
dolorro consed earia etum quatur re et quam
illabor ecabor ma dolupta taspelente ipsam
quaspe occum quaesti dolupta temoluptur,
ad que lat.
tis ipsamtatur, omni iniendi officia nosapit ut
ma pa quibus quodiciet aut maiore aute veris
KIM STAHLMÖBEL AG
DREIDIMENSIONALE OBJEKTE
1
TABLE OF CONTENTS
Office desks and conference tables
Rondo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Alpha . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Primo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Semo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Quadro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Magnum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Fusio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Calma . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Height adjustable desks
Cavalletto . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Cambio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Semplice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Seduta . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Control center and command tables
Vario II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Vario Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Vario S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Table lamp Tekno . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Accessories for office tables
Table accessories . . . . . . . . . . . . . . . . . . . . . . . . 39
Cable duct Vasca . . . . . . . . . . . . . . . . . . . . . . . . . 40
CPU holder Erculeo . . . . . . . . . . . . . . . . . . . . . . . 40
Hanging file systems . . . . . . . . . . . . . . . . . . . . . . 41
Chairs
Chair Punti . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Barstool Zero. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Coat racks
Angolo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Hospital and clinic accessories
Cabinet boards. . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Telescopic curtain rail. . . . . . . . . . . . . . . . . . . . . 51
Material samples
Metal surfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Coated surfaces . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Wooden surfaces . . . . . . . . . . . . . . . . . . . . . . . . . 54
Drawings (all measurements in mm) – technical changes reserved
Kim Stahlmöbel AG Dreidimensionale Objekte | Ringstrasse 15 | CH-8600 Dubendorf | Telephone +41 (0)44 801 90 10 | Telefax +41 (0)44 801 90 19 | www.kim.ch
1
AAA
Funktional und ästhetisch.
Der hydraulische Tisch Cavalletto verbindet
Funktionalität mit klassischer Ästhetik. Sein
Aussehen erinnert an die klassischen Studiotische der 50er-Jahre. Die Unterkonstruktion
aus schwarz gepulvertem Stahl trägt jede
Last. Bezüglich Länge und Material des Tischblattes sind beinahe keine Grenzen gesetzt.
Das Geniale am Cavalletto ist seine hydraulisch verstellbare Höhe. So lässt es sich auch
im Stehen effizient arbeiten. Von den ersten
Gestaltungsentwürfen bis zu den Konstruktionszeichnungen zeichnen die Produktdesigner von Hauser & Partner verantwortlich.
Ut audanimustia eaquibus Natur
quos ditatis eost, et lam ut et pore voloreptia
voleste nimoluptur ratur sus ullupnti reperuptae volor repudis doluptatur reprore re, alia
vent eumquam quosapelit quuntorrovit que
conse sanihictemod ulpa vidus inisque si sit
quis volute qui tempore verumet magnamus
aut aut della sed quo officimus veliquam
rerum vendanducium fuga. Ibus vero quae
volori totatis magnim vo
Ut audanimustia eaquibus Natur
lorro videbita nus, ium resti voluptatiae
dolorro consed earia etum quatur re et quam
illabor ecabor ma dolupta taspelente ipsam
quaspe occum quaesti dolupta temoluptur,
ad que lat.
tis ipsamtatur, omni iniendi officia nosapit ut
ma pa quibus quodiciet aut maiore aute veris
OFFICE DESKS AND
CONFERENCE TABLES
2
RONDO
RONDO
The classic office desk.
– Tabletop in screwed steel tube
– Metal surface: (raw) chromium-plated,
dull chromed, powder-coated or glossy
galvanized
– Table leaf available in different materials
and finishings
– Execution in different sizes and heights
– Rectangular, trapezoid or triangular
– Table legs running to top edge of the
table leaf
– Profile cross-section (plinth): 40 × 20 mm,
legs ø 35 mm
740
The Rondo office desk is based on a modular
system. The tabletop support is made out of
screwed steel tube. The table leaf is available
in different materials and finishings. Different
measurements – rectangular, trapezoid or
triangular are possible. This desk also comes
with a very vast range of different accessories. Thanks to its modular concept, it can be
transformed easily into a complete and highly
functional work space.
800–2000
800–1000
4
ALPHA
ALPHA
The indestructible office desk.
– Tabletop in screwed steel tube
– Metal surface chromium plated,
dull-chromed, powder-coated or
glossy galvanized
– Table leaf available in different materials
and finishings
– Execution in different sizes and heights
– Rectangular, trapezoid or triangular
– Table legs running to top edge of the
table leaf
– Profile cross-section (plinth): 40 × 20 mm,
legs ø 35 mm
630 –760
The Alpha desk has a convincingly streamlined and elegant form. Thanks to the use
of robust materials, this desk is as good as
indestructible. The tabletop is available in
different sizes and materials and can be
chosen in rectangular, trapeze or triangular
form. Alpha offers a myriad of different possibilities of combination. The legs run to the
lower edge of the tabletop, thus ensuring a
generous, flat working surface all the way to
the edges.
800–2000
800/1000
6
PRIMO
PRIMO
Tested and proved a thousand times over.
– Tabletop in screwed steel tube
– Metal surface powder-coated, (raw) chromium-plated, raw waxed or glossy galvanized
– Table leaf available in different materials
and finishings
– Execution in different sizes and heights
– Table legs running to top edge of the
table leaf
– Various accessories available
– Wheels can be added for mobile usage
– Profile cross-section (plinth): 40 × 20 mm,
legs 30 × 30 mm
630 –760
Modular, robust and simple. The tabletop
support is manufactured out of screwed steel
pipe. The table leaf is available in different
materials and versions. Wheels can easily
be added to the Primo office desk in view of
mobile usage – ideal for schools, craft rooms
or workshops – also available in an extra
robust version («Office table Semo» profile
cross-section (plinth): height 50 mm,
legs 35 × 35 mm).
800–2000
800/1000
8
SEMO
SEMO
The extra stable version.
– For tables of a length of over 2000 mm
– Tabletop in screwed steel tube
– Metal surface powder-coated, raw waxed
or glossy galvanized
– Profile cross-section (plinth): 50 × 25 mm,
legs 35 × 35 mm
630 –760
This extra-strong version of an all-purpose
desk comes in a frame of steel pipe, thus
ensuring elegance, despite its great loading capacity. Semo is available in different
sizes and heights as well as in a version with
wheels for mobile usage. The tabletop can be
produced out of a large choice of different
materials and finishings – an ideal solution
for workshops, factories or schools.
800–3000
800/1000
10
QUADRO
QUADRO
The robust aluminum table.
– Tabletop support in screwed aluminum.
– Metal surface in natural anodized or black
anodized aluminum
– Table leaf available in different materials
and finishings
– Execution in different sizes and heights
– Table legs running to top edge of the
table leaf
– Profile cross-section (plinth): 50 × 25 mm,
legs 35 × 35 mm
740
The Quadro office desk convinces with its
clear lines and traditional forms. The tabletop
support is made out of screwed aluminum.
The table leaf is available in different materials and finishings. Execution possible in
different sizes and heights – the legs run to
the top edge of the table leaf.
800–2000
800–1000
12
MAGNUM
MAGNUM
Robust and sturdy.
– Tabletop support in steel pipe
– Metal surface powder-coated
– Table leaf available in different materials
and finishings
– Execution in different sizes and heights
– Steel pipe frame 70 × 40 mm, welded
– Steel pipe legs, ø 80 mm, with frame
screwed on, drill holes for fixing of tabletop
– Surface: black powder-coated frame,
chromed legs (shiny) or black frame,
black powder-coated legs
690
The conference table Magnum is robust and
sturdy. Its size varies in order to cater to
multi-part non self-supporting tabletops. The
substructure is made out of screwed steel.
The tabletop is available in a myriad of different forms and materials.
2000/3000
1000/1200
14
FUSIO
FUSIO
Welded universal table.
– Tabletop support in steel pipe or in welded
chrome steel pipe
– Metal surface raw, waxed, powder-coated
or polished chrome steel
– Table leaf available in different materials
and finishings
– Execution in different sizes and heights
– Profile cross-section 30 × 30 mm (tables as
of 2000 mm length, 35 × 35 mm)
630–760
Robust, simple and modular is what best
describes the office desk Fusio. The tabletop
support is made out of steel pipe or welded
chrome steel pipe; the surfaces are available
in raw, waxed, coated or in CRNI steel, polished or brushed. The table leaf is available in
different materials and finishings; execution
is possible in different measurements.
800–2000
800/1000
16
CALMA
CALMA
The universal table with the special
substructure.
– Tabletop support in steel pipe or welded
chrome steel pipe
– Metal surface raw, waxed, powder-coated
or polished chrome steel
– Table leaf available in different materials
and finishings
– Execution in different sizes and heights
– Profile cross-section 30 × 30 mm (tables
as of a length of 2000 mm, 35 × 35 mm to
50 × 50 mm)
– Also available as a stand-up table
630–760
Robust, simple, modular: this is how we
would describe Calma. The tabletop support
can be chosen in steel pipe or in chrome
steel pipe. Surfaces are available in raw,
waxed, coated or in CRNI steel, polished or
brushed. Table leaves come in various different materials and finishings. This model can
be executed in different measurements.
800–2000
800/1000
18
AAA
Funktional und ästhetisch.
Der hydraulische Tisch Cavalletto verbindet
Funktionalität mit klassischer Ästhetik. Sein
Aussehen erinnert an die klassischen Studiotische der 50er-Jahre. Die Unterkonstruktion
aus schwarz gepulvertem Stahl trägt jede
Last. Bezüglich Länge und Material des Tischblattes sind beinahe keine Grenzen gesetzt.
Das Geniale am Cavalletto ist seine hydraulisch verstellbare Höhe. So lässt es sich auch
im Stehen effizient arbeiten. Von den ersten
Gestaltungsentwürfen bis zu den Konstruktionszeichnungen zeichnen die Produktdesigner von Hauser & Partner verantwortlich.
Ut audanimustia eaquibus Natur
quos ditatis eost, et lam ut et pore voloreptia
voleste nimoluptur ratur sus ullupnti reperuptae volor repudis doluptatur reprore re, alia
vent eumquam quosapelit quuntorrovit que
conse sanihictemod ulpa vidus inisque si sit
quis volute qui tempore verumet magnamus
aut aut della sed quo officimus veliquam
rerum vendanducium fuga. Ibus vero quae
volori totatis magnim vo
Ut audanimustia eaquibus Natur
lorro videbita nus, ium resti voluptatiae
dolorro consed earia etum quatur re et quam
illabor ecabor ma dolupta taspelente ipsam
quaspe occum quaesti dolupta temoluptur,
ad que lat.
tis ipsamtatur, omni iniendi officia nosapit ut
ma pa quibus quodiciet aut maiore aute veris
HEIGHT ADJUSTABLE
DESKS
19
CAVALLETTO
CAVALLETTO
The height adjustable designer desk.
– Sitting / standing desk with electrohydraulic height adjustment 750–1150 mm)
– Tabletop support in welded steel pipe
–Powder-coated metal surface
–Table leaf available in different materials
and finishings
–Standard heights table leaf:
2500 × 900 mm, 3000 × 900 mm and
3200 × 900 mm, other measurements
subject to demand
Cavaletto is a hydraulic height adjustable
desk that cleverly combines functionality
with classic aesthetics. Its look reminds you
of the classic studio desks of the 50s. The
substructure manufactured out of black powdered steel will support any load. In terms of
length and materials of the table leaf, there
are almost no boundaries.
The ingenious thing about Caveletto is its
hydraulic height adjustment allowing for
efficient work when standing.
2500/3000/3200
750
1150
Designed by the product designers of
Hauser & Partner AG.
900
900
21
CAMBIO
CAMBIO
The height adjustable office desk.
– Sitting/standing desk with electro-hydraulic
height adjustment 750–1150 mm)
– Tabletop support in welded steel pipe
– Powder-coated metal surface
– Table leaf available in different materials
and finishings
– Standard heights table leaf:
2500 × 900 mm, 3000 × 900 mm and
3200 × 900 mm, other measurements
subject to demand
Working at such a desk is pure pleasure.
If one has the wish to work in the standing position, the tabletop can be infinitely
adjusted by the hydraulic system to have it
lifted to the desired height; to lower the desk
to sitting level again, it is sufficient to push a
discreetly hidden button on the work surface.
Disturbing cables of electronic equipment
can be stored away nicely in the cable duct in
the middle of the desk area.
2500/3000/3200
750
1150
Cambio’s table leaf color and size can be
adapted to meet almost all wishes and
desires.
900
900
23
SEMPLICE
SEMPLICE
Electric height adjustable office desk.
– Sitting/standing desk with electro-hydraulic
height adjustment 622–1272 mm)
– Tabletop support in welded steel pipe and
powder-coated
– Table leaf available in different materials
and finishings
– Standard measurements:
2000 × 800 × 622/1272 mm
1800 × 800 × 622/1272 mm
1600 × 800 × 622/1272 mm
– This desk complies with the ergonomics
standard DIN EN 527-1
The lifting table “Semplice” allows for comfortable and efficient work. The built-in lifting
motors will ensure the continuously variable
positioning of the desk at the desired height
for work sitting or standing. Desk manufactured out of welded steel pipe with two lifting
columns for electric height adjustment from
622 to 1272 mm; with a foldable cable tray
on the back; coated tabletop and ABS edge
banding throughout.
Desktop surface in pale grey (standard) with
black ABS edge banding (other versions subject to demand).
min. 622
1272
Semplice with accessories: Simply
“Semplice”! The desk’s beautiful form and
numerous accessories such as the computer
mount, printer shelf or privacy screens make
it a wonderful choice. Hand-crafted in powercoated steel.
1600/1800/2000
800
800
25
SEDUTA
SEDUTA
The perfect all-rounder.
– Sitting/standing desk with electro-hydraulic
height adjustment 750–1150 mm)
– Tabletop support in welded steel pipe
– Metal surface powder-coated
– Table leaf available in different materials
and finishings
– Standard measurement: 3500 × 1200 mm
750
1150
As an office desk or meeting table, Seduta
offers major advantages. In addition to the
height adjustable table area (electro-hydraulic system ensuring settings of between 750
and 1150 mm) and its impeccable workmanship, Seduta is also a perfect all-rounder as
a conference table. Thanks to the mounting
angles turned inwards, both ends of the table
can also be used for seating with sufficient
legroom and the possibility to position office
chairs comfortably. The table frame is manufactured out of steel pipe and then powder-coated. Different materials and sizes are
possible for the tabletop. The height-adjustable feature ensures utmost comfort – sitting
or standing at the desk.
3500
1200
1200
27
AAA
Funktional und ästhetisch.
Der hydraulische Tisch Cavalletto verbindet
Funktionalität mit klassischer Ästhetik. Sein
Aussehen erinnert an die klassischen Studiotische der 50er-Jahre. Die Unterkonstruktion
aus schwarz gepulvertem Stahl trägt jede
Last. Bezüglich Länge und Material des Tischblattes sind beinahe keine Grenzen gesetzt.
Das Geniale am Cavalletto ist seine hydraulisch verstellbare Höhe. So lässt es sich auch
im Stehen effizient arbeiten. Von den ersten
Gestaltungsentwürfen bis zu den Konstruktionszeichnungen zeichnen die Produktdesigner von Hauser & Partner verantwortlich.
Ut audanimustia eaquibus Natur
quos ditatis eost, et lam ut et pore voloreptia
voleste nimoluptur ratur sus ullupnti reperuptae volor repudis doluptatur reprore re, alia
vent eumquam quosapelit quuntorrovit que
conse sanihictemod ulpa vidus inisque si sit
quis volute qui tempore verumet magnamus
aut aut della sed quo officimus veliquam
rerum vendanducium fuga. Ibus vero quae
volori totatis magnim vo
Ut audanimustia eaquibus Natur
lorro videbita nus, ium resti voluptatiae
dolorro consed earia etum quatur re et quam
illabor ecabor ma dolupta taspelente ipsam
quaspe occum quaesti dolupta temoluptur,
ad que lat.
tis ipsamtatur, omni iniendi officia nosapit ut
ma pa quibus quodiciet aut maiore aute veris
CONTROL CENTER AND
COMMAND TABLES
28
CONTROL CENTER AND
COMMAND TABLES
Ergonomic workstations –
made to measure.
Work space design is defined by space and
function. Our modular system ensures madeto-measure individual or group work spaces
for control and coordination, guidance and
monitoring.
The thought-through steel tube construction
ensures a robust basis for work surfaces and
bearing systems. This allows for the arranging of screens and other devices in line with
requirements, thereby ensuring a neat and
process-oriented arrangement of the work
environment.
Experience
Benefit from our many years of experience
in the development and design of practical,
functional, and ergonomic work spaces. As a
competent partner, we offer everything from
one single source – from planning to delivery
and beyond.
Individual comprehensive solutions
Thanks to our in-house production, we are
able to meet individual requirements. Our
modular system comprising thought-through
detailed solutions allows us to ensure comprehensive solutions that meet your individual
requirements.
Functional detailed solutions
Our monitor support system allows for the
easy installation of ergonomically arranged
groups of monitors. Thanks to the modular
principle, an electrification of the work space
in line with individual specifications can
be ensured. Sophisticated details allow for
ergonomic work at functional, modern work
spaces.
29
VARIO II
VARIO II
650
1310
Variable, dynamic, ergonomic.
Thanks to its rounded work surface, Vario II is
a made-to-measure workspace that fulfills all
desires in terms of variability, comfort of use
and ergonomics. The desk surface and monitors can be electrically adjusted separately
and thanks to their modular composition,
form an intelligent comprehensive solution
that can be adapted to meet individual
requirements. Vario II fulfills the ergonomics
standard DIN EN 527-1.
max. 2550
1290/1390
1630/1760
31
VARIO LINE
VARIO LINE
650
1310
Exemplary throughout.
The control room desk Vario Line combines
comfort, ease, innovation and design. The
electric height adjustment allows for efficient
work – sitting or standing. To ensure a perfectly arranged workspace, monitors can be
variably adjusted up to a height of 160 mm.
The Vario Line complies with the ergonomics
standard DIN EN 527-1.
2000–2740
1290/1390
1290/1390
33
VARIO S
VARIO S
The guiding star among control center
desks.
Much space for efficient work is what the
space-saving control center desk Vario S
ensures – the powerful lifting motors guarantee the precise positioning of your work
surface and allow you to work when you’re
standing as well.
The version with the inward facing lifting
motors ensures additional space beneath the
table surface for the positioning of drawer
racks.
710
1200
Vario S, hand-manufactured out of steel with
utmost precision, is available as of a length
of 1800 mm.
1800–2740
1800–2740
1000/1100
1000/1100
35
TEKNO
TEKNO
Directional light.
This elegant continuously dimmable LED table
lamp was designed for use with the Vario I
and II, Vario Line and Vario S tables as well
as other office desks equipped with corresponding mounts. Thanks to a central joint,
Tekno’s swivel arm directs the light precisely
to where it is needed. The lamp is equipped
with 2 LED modules of 1250 lumen.
37
ACCESSORIES FOR
OFFICE TABLES
ACCESSORIES FOR
OFFICE TABLES
Large range available.
Thanks to our large range of accessories, our
office desks and conference tables can easily
be transformed into comprehensive, highly
functional work spaces.
39
VASCA
Elegant cable duct.
This cable duct made out of powder-coated
metal ensures order beneath your work
space. Discreet and elegant as well as highly
functional.
ERCULEO
Computer mount.
Erculeo will help you to position your computer perfectly underneath your work surface.
The delicate crossbar design of powder-coated or chrome-plated metal is easy to mount
and will bear the weight of your computer
effortlessly.
40
HANGING FILE SYSTEMS
280/290/370/660
Gain space and store away neatly.
Hanging file systems are practical and help
to save space. Containers for classic hanging
files props in black or chrome steel (A4, A3
and folio formats) are part of our offer that
is completed by our hanging file support
frames.
350/390/520
310/620
41
CHAIRS
42
PUNTI
PUNTI
420
460
830
Maximum points for this model.
This chair offers everything that makes for
a good piece of seating furniture: comfort,
timeless design, functionality and excellent
quality in terms of the materials used and
product execution.
The welded substructure consists of folded
16 mm of brilliantly chromed steel tube. The
seat bucket is made out of oak plywood that
was perforated, stained black and lacquered.
The Punti chair, at a height of 460 mm, can
be stapled easily (up to seven chairs) and is
equipped with a chair glider and a stapling
cover made out of black plastic.
The chair is available in different materials
and finishings.
420
44
ZERO
ZERO
420
1010
805
Classic stapler.
This attractive barstool can be used everywhere where uncomplicated seating and
flexible room design are called for. The delicate substructure made out of 14 mm welded
and brilliantly chromed steel tube. The seat
bucket consists of oak plywood that was
stained black and lacquered. Equipped with
a foot rest, a stapling cover made out of
black plastic and a stool glider, up to four
such barstools can be stapled easily.
This product has a height of 805 mm and a
design and color that match excellently with
the Punti chair model.
This model is available in different materials
and finishings.
415
46
COAT RACKS
LEITSTELLENTISCHE
ANGOLO
Stylish coat racks.
–Simple and space-saving design
–Vertical column in powder-coated
steel pipe
–Brackets in polished chrome steel
–Available in different RAL colors
48
HOSPITAL AND CLINIC
ACCESSORIES
WARDROBE TRAYS
Chrome-plated.
Mobile wardrobe made out of tubular steel
with retractable shelves, open corners, in
anodized aluminum. Edge protection in pale
grey plastic. Swivel castors: Ø 75 mm, with
grey rubber wheels.
min. 1690
Aluminum, naturally anodized
Mobile wardrobe with deposit board, corners
and rear wall with large radii and openings to
facilitate cleaning, comes with three special
coat hangers. Edge protection in pale grey
plastic. Swivel castors: Ø 75 mm, with grey
rubber wheels.
400
500
50
TELESCOPIC
CURTAIN RAIL
Insertable curtain rails, easy to connect and
disconnect to wall panels. Matching curtain
rings with spring clips, without wall panel.
Available in two different sizes, with and
without joints.
51
METAL SURFACES
Raw steel
Bright chrome-plated steel
Matt chrome-plated steel
Stainless steel
Aluminium
52
COATED SURFACES
Black, RAL 9005
Anthracite B1 KIM métalis
Graphite grey, RAL 7015
Aluminium, white RAL 9006
Pale grey, RAL 7035
53
WOODEN SURFACES
Stained ash, black
Natural walnut
Stained beechwood
Natural maple
Pale beechwood
Oak
Oak, silver-brown
54
KIM STAHLMÖBEL AG
Three-dimensional objects.
Office furniture for professional use. Our
office future is based on timeless design –
the objects are functional, ergonomic and
affordable.
Take a look: We manufacture functional office
desks based on classic design, electrically
and hydraulically height-adjustable tables,
modular universal desks and various accessories.
Our products can be customized to offer your
staff efficient workplaces tailored to meet
their requirements. Kim manufactures madeto-measure offices and workstations, desks
and control stations.
Single source solution.
We advise, plan, produce, assemble and
dedicate sufficient time to providing
corresponding service.
Visit our website:
www.kim.ch
55