Oilless Scroll Compressor NEW

Transcription

Oilless Scroll Compressor NEW
Oilless Scroll
Medical Air Compressor
Duplex
Triplex
Features
No oil
No water
Ultra-reliable PLC controls
Digital temperature displays for each compressor
Low maintenance
Pre-packaged and pre-wired
Simple installation
One electrical connection
One inlet connection and one outlet connection
Specifications
Class 1 Inc. triplex, oilless, rotary scroll Medical Air Compressor
system, factory assembled and tested, prewired and prepiped on a
horizontal receiver and frame as follows:
Model:
OLS500-S200X3DD-DSA
Capacity (each pump):
15 SCFM @ 100 PSI
Max. pressure:
145 PSI
Electrical (each pump):
5 HP,575V / 3 / 60 Hz
Receiver:
200 USG
.
Compressors & Piping Components: Powerex model SLAE air
cooled, oilless, rotary scroll complete with:
cast aluminium crankcase
one fixed and one moving orbital scroll
Teflon tip seal
continuously lubricated sealed bearings
shaft driven radial fan, air shroud, and finned flywheeel for
cooling
motor pulley, V-belt drive and OSHA guard
air-to-air aftercooler
air intake filter with replaceable element, inlet isolation valve,
and 316L stainless steel flexible coupling
outlet check valve, outlet isolation valve, ASME pressure
relief valve, condensate separator, unloader solenoid valve,
and 316L stainless steel flexible coupling
Piping: Discharge piping of Type L degreased copper and Schedule 40
brass pipe and fittings. Unions to be provided for ease of installation and
service.
Receiver: Welded steel, galvanized inside and outside, powdercoated, ASME certified and CRN registered for a working pressure
of 200 PSI and complete with: sight glass; ASME rated pressure
relief valve; 2½” liquid-filled, 200 PSI pressure gauge; automatic
and manual drain valves; test valve and muffler; two inspection
openings.
Control Panel: Special inspection approved, NEMA 12 enclosure,
factory prewired, system mounted, and tested, and complete with:
main disconnect switch
door interlock disconnect switch (each pump)
motor circuit controllers with motor overload protection and
push-button manual disconnect (each pump)
variable-speed motor drives (each pump)
two control transformers with primary and secondary fusing
Manual / Off / Auto selector,switches (each pump)
90 dB alarm buzzer, Silence Button, Alarm Reset Button
PLC controls
4-line interactive text display complete with system status and
alarm events, hour meters, vacuum level, user adjustable
settings, and password protection.
Numbered terminal strip with dry contacts for site connection
to Master Alarm panel for: Lag/Failure; Motor Overload; High
Temperature; Transformer Failure.
Programming and Control:
Lead pump(s) to operate between 90 and 120 PSI.
Lead pump(s) to automatically alternate.
High temperature alarm and shutdown set at 175o C.
Lag alarm set at 85 PSI and to require manual reset.
Lag/Failure alarm contacts to open on: Lag condition; Motor
Overload; Power Failure; Transformer Failure; Selector
Switch not in Auto position.
ã 1997 - 2008 Class 1 Inc.
class1inc.com
Updated: November 18, 2008
Oilless Scroll
Medical Air Compressor
Receiver Mount
Duplex
1) ASME AIR RECEIVER
6) AIR INTAKE FILTER
2) AIR PRESSURE GAUGE
7) SIGHT GLASS
3) RECEIVER SAFETY VALVE
8) MANUAL RECEIVER DRAIN VALVE
4) ISOLATION VALVE
9) AUTOMATIC RECEIVER DRAIN VALVE
5) VEE BELT GUARD
10) CONTROL PANEL
6
6
5
Triplex
5
2.82
10
3
Height
4
ASME
2
1
7
9
Length
3.36
8
Width
1.30
Duplex
HP
Model Number
*Flow Each
*Flow Total
SCFM
LPM SCFM
Length
LPM In.
mm
Width
In.
Height
mm
In.
**Weight
mm
Lb.
kg
3
OLS300-R80X2
8.6
244
17.2
487
66
1676 30
762
56
1422
650
295
5
OLS500-R120X2
14.7
416
29.4
833
80
2032 30
762
56
1422
780
355
Triplex
HP
Model Number
*Flow Each
*Flow Total
SCFM
LPM SCFM
Length
LPM In.
mm
Width
In.
Height
mm
In.
**Weight
mm
Lb.
kg
3
OLS300-R120X3
8.6
244
25.8
731
80
2032 30
762
56
1422
780
355
5
OLS500-R120X3
14.7
416
44.1
1249
80
2032 30
762
56
1422
950
432
Note: All weights are approximate and subject to change.
class1inc.com
ã 1997 - 2006 Class 1 Inc.
Updated: November 14, 2006