2009 sampe - Wichita Chapter

Transcription

2009 sampe - Wichita Chapter
2009 SAMPE
Fall Technical Conference & Exhibition
Century II Convention Center, Wichita, Kansas
October 19-22, 2009
Co-Located with ASTM-D30 Conference
Final Program and Exhibitors Guide
Global Material Technology: Soaring to New Horizons
Hosted by SAMPE’s New Jersey and Wichita Chapters
Welcome to Wichita and the 2009 SAMPE Fall Technical Conference, co-located with the ASTM D-30 conference. SAMPE’s Wichita and New
Jersey chapters are pleased to present this conference, whose theme is “Global Material Technology: Soaring to New Horizons.”
The conference features 41 technical sessions with over 175 papers, two keynote presentations, three featured lectures, and six panels. Eight
tutorial sessions are offered on Monday, along with a multi-scale modeling workshop on Thursday. Also on Thursday, tours are offered of
the Spirit AeroSystems manufacturing facility, and laboratories of the National Institute for Aviation Research at Wichita State University. The
exhibit hall will showcase over 100 exhibitors. You are invited to network with your fellow conference attendees at the Welcome Reception on Tuesday evening, and at morning and afternoon
coffee breaks Tuesday and Wednesday. Wednesday evening’s entertainment will feature a Kansas Saloon, with a barbecue and calf roping. In
addition, the SAMPE awards luncheon will be held Thursday.
Wichita, a city of more than 400,000 people, is the heart of industry and commerce in the state of Kansas. Known as the “air capitol of the
world,” it is the local presence of six major aerospace companies: Airbus, Boeing, Bombardier/Learjet, Cessna, Hawker Beechcraft, and Spirit
AeroSystems.
We hope you enjoy the conference and your stay in Wichita.
Benjamin Rasmussen and Melanie Violette, General Co-Chairs, 2009 Fall Technical Conference
SAMPE Thanks Our Organizing Committee:
General Co-Chairs
Ben Rasmussen, BMR Associates
Melanie Violette, Wichita State University
Technical Program Co-Chairs
Timothy Chavez, Spirit AeroSystems
Howard Kliger, HS Kliger & Associates Inc.
Brad Lucht, Honeywell Federal Manufacturing & Technologies
Louis Pilato, Consultant
Volunteers Chairs
Ralph Carson, Retired
Yeow Ng, National Institute for Aviation Research
AV Support Chair
Tracee Friess, National Institute for Aviation Research
Financial Chairs
John Osterndorf, US Army RDECOM-ARDEC
Bill Washburn, Spirit AeroSystems
Exhibits Chair
Tony Constantino, Fiber-Line Inc.
Sponsors Chair
Borys Schafran, Evonik Degussa
Attention SAMPE Conference Attendees!
w This year’s SAMPE Fall Technical Conference is co-
located with the ASTM D30 Meeting. The ASTM D30
meeting requires separate registration from the SAMPE
Conference. ASTM D30’s registration area is located in
the Stimson/Santa Fe Room, Hyatt Regency Hotel.
w Also, SAMPE Fall Technical Conference and Exhibition attendees
will be able to attend, at no charge, the Wichita Industrial Trade Show
(WITS) which is also being held in the Bob Brown hall of the Century
II Convention Center.
The WITS show hours are:
Tuesday, October 20
1:00 – 7:00 PM
Wednesday, October 21 10:00 AM – 7:00 PM
Thursday, October 22 10:00 AM – 4:00 PM
w Join us for the 2009 SAMPE Technical Communities Meeting. Discuss
ways SAMPE’s Technical Communities can work better for you. This
meeting will take place on Wednesday, October 21, 2009 from 4:30
– 5:30 PM in the Chisholm Room at the Hyatt Regency Hotel.
w Tour registration is not available onsite. Tours are available only
to attendees who registered and confirmed their attendance by Sept.
30.
A Special Thank You to Our Conference Sponsors!
A division of Tec Industries, LLC
www.sampe.org
Century II Convention Center and Hyatt Regency Hotel Layout
SAMPE
registration
SAMPE
EXHIBITS
W.I.T.S. Exhibits
Hyatt Regency Meeting Rooms
Exhibits Hours
Tuesday
10:00 AM - 4:00 PM
Wednesday
10:00 AM - 4:00 PM
Coffee Breaks
Tuesday and Wednesday
Complimentary coffee will be available in the
exhibition hall, sponsored by Evonik Jayhawk Fine
Chemicals, during these breaks.
10:40 – 11:00 AM
2:55 – 3:25 PM
SAMPE Fall Tech Conference & Exhibits–Wichita, KS
2009 SAMPE Fall Technical
Monday, October 19
Tuesday, October 20
Registration 7:30 AM - 5:00 PM
Registration 7:30 AM - 5:00 PM
Tutorials (Tutorials require additional fees)
9:00 AM – 12:00 PM
•Tooling for Composite Materials–Room 204
•Composites Damage Tolerance: Materials & Structures–Room 205
•Composite Materials Overview–Room 207
•Design & Analysis of Composite Materials & Structures–Room 208
8:00 AM – Keynote
•Global Materials Technology–Room 209A
9:00 AM – Panels
•Benchmarking of Composite Technology for Aircraft Structures Europe vs. USA–Room 204
•Damage Resistance of Composite Sandwich Structures–Room 206 (Joint SAMPE and ASTM D-30 Program)
9:00 AM - 12:00 PM – Sessions
•Resin & Plastics Technology - Non-Epoxy Systems–Room 207
Tutorials require a fee separate from conference registration.
•Advances in Manufacturing & Out-of-Autoclave I*
ITAR
Room 209B
•Sensors in Aerospace Systems–Room 205
10:40 AM – Coffee Break sponsored by
ITAR
*Sessions include ITAR restricted presentations.
11:00 AM - 12:00 PM – Session
•Design & Analysis of Composite Structures I–Room 208
•Epoxy Resin Technology I–Room 207
11:00 AM – Featured Lecture/Session
•The Role of Education in Composites Engineering–Room 205
No Exhibits
Exhibits 10:00 AM - 4:00 PM
2:00 – 5:00 PM
•Thermoset Resins Technology–Room 204
•Testing of Composite Materials–Room 205
•Composites Repair Technology & Issues–Room 207
•Composites Fabrication & Manufacturing Overview–Room 208
Coffee Breaks - Sponsored by
1:15 - 5:00 PM – Panel
•Energy Issues in Aviation–Room 204
1:15 - 3:15 PM Session
•Advances in Manufacturing & Out-of-Autoclave II*
ITAR
Room 209B
1:15 - 5:00 PM – Sessions
•Epoxy Resin Technology II–Room 207
•Design & Analysis of Composite Structures II–Room 208
•3-D Nanostructured Advanced Composites–Room 206
•Damage Tolerance & Fracture Mechanics–Room 205
2:55 PM – Coffee Break sponsored by
Tuesday and Wednesday
10:40 – 11:00 AM
and
2:55 – 3:25 PM
Complimentary coffee will be available
in the exhibition hall.
3:15 - 5:00 PM – Sessions
•Tooling Advancements–Room 209B
•Ballistic Composites–Room 204
4:15 - 5:00 PM – Sessions
•Automated Tape Placement/Automated Fiber Placement–Room 204
5:00 - 6:00 PM – Welcome Reception–Upper Gallery
SAMPE Fall Tech Conference & Exhibits–Wichita, KS
Conference At-A-Glance
Wednesday, October 21
Thursday, October 22
Registration 7:30 AM - 5:00 PM
Registration 7:30 AM - 1:30 PM
8:00 AM – Keynote
•Materials, Processing and Manufacturing Technology: A Rich History and Promising Future–Room 209A
8:15 AM – Featured Lecture
•Acoustic Emission (AE) Offers New Horizons for Composites–
Room 205
9:00 AM - 12:00 PM – Panel
•Commercializing Composites: The Outlook for High-Volume, Sustainable Material Applications–Room 206
8:45 AM - 5:00 PM – AFOSR Workshop
•Multiscale Modeling for Polymer Matrix Composites–Room 208
9:00 AM - 12:00 PM – Sessions
•Testing & Qualification of Materials–Room 208
•Technologies to Assist Composite Manufacturers I–Room 209B
•Nanocomposites & Multifunctional Materials–Room 204
•Composite Foams–Room 205
9:00 - 10:40 AM – Session
•Epoxy Resin Technology III–Room 207
10:40 AM – Coffee Break sponsored by
11:00 AM – Featured Lecture
•Metal Composite Hybrid Materials & Products–Room 205
11:00 AM - 12:00 PM – Session
•Bio-, Natural & Innovative Materials I–Room 207
9:00 AM - 10:40 AM – Session
ITAR
ITAR •Lightning Strike Protection*–Room 206
9:00 AM - 12:00 PM – Sessions
ITAR
1:40 - 2:55 PM – Sessions
•Technologies to Assist Composite Manufacturers II–Room 209B
•Infusion Technology – Applications–Room 205
1:40 - 5:00 PM – Session
•Bio-, Natural & Innovative Materials II–Room 207
•Nanofiber Technology, Uses–Room 204
•Core & Sandwich Materials–Room 208
2:55 PM – Coffee Break sponsored by
3:15 - 5:00 PM – Panel
•Technologies to Assist Composite Manufacturers–Room 206
3:15 - 5:00 PM – Sessions
•Building Blocks to Advanced Materials Applications–Room 209B
•Infusion Technology - Resins/Preforms–Room 205
4:30 PM – Technical Communities Meeting
6:00 PM
Night on the Kansas Prairie–Eagle Ballroom, Hyatt Regency Hotel
•EMI Shielding, Conductive Materials*–Room 205
•Nano-Enhanced Resins for Aerospace Applications I–Room 204
ITAR
•High Temperature Resins & Composites I*–Room 207
10:40 AM – Brief Session Break–Room 209A
11:00 AM - 12:00 PM - Sessions
•Filament Winding & Pultrusion I–Room 209B
•Infusion Technology - Processing Effects–Room 206
12:15 PM – SAMPE Awards Luncheon–Room 210B
Exhibits 10:00 AM - 4:00 PM
1:15 - 2:55 PM – Panel
•Design & Analysis Tool Demonstration–Room 206
•Manufacturing with Nano-modified Composites*–Room 209B
No Exhibits
1:45 - 5:00 PM – Tours
(Registration closed)
•National Institute of Aviation Research, Wichita State University
•Spirit AeroSystems
Meet in Hyatt Regency Hotel lobby at 1:45 sharp
1:45 - 3:35 PM – Sessions
•POSS Resin Systems–Room 206
ITAR
ITAR
•Nano-Enhanced Resins for Aerospace Applications II*
Room 204
•High Temperature Resins & Composites II–Room 207
1:45 - 5:00 PM – Session
•Filament Winding & Pultrusion II–Room 209B
3:25 PM – Brief Session Break
3:45 - 5:00 PM – Sessions
•Automation & Optimization of Autoclave Cure–Room 204
•POSS Resin Systems Round Table–Room 206
•Nondestructive Evaluation & Inspection*–Room 207
www.sampe.org
Monday, October 19 Tutorials
Tutorials are half-day courses that require a separate cost from the conference registration. Depending upon the tutorial, either a printed
handout or electronic handout will be included.
Prices are: $150 with conference registration, $75 for students, $199 for other registrants.
9:00 AM – Noon
2:00 – 5:00 PM
Tooling for Composites–Room 204
Robert Stratton, Stratton Composite Solutions
Thermoset Resin Matrices–Room 204
Dr. James Senger, Cytec Engineered Materials
Composites Damage Tolerance: Materials & Structures–Room 205
Dr. Keshavanarayana Raju, Wichita State University
Testing of Composite Materials–Room 205
Dr. Don Adams, Wyoming Test Fixtures
Composite Materials Overview–Room 207
Dr. Linda Clements, C&C Innovation Strategies Inc.
Composites Repair Technology & Issues–Room 207
Louis Dorworth, Abaris Training Resources Inc.
Design & Analysis of Composite Materials & Structures–Room 208
Dr. Dan Adams, University of Utah
Composites Fabrication & Manufacturing Overview–Room 208
Dr. James C. Leslie, ACPT Inc.
Important session information for all attendees.
SAMPE Restricted Papers —ITAR Regulations Session Admittance
ITAR
(REVISED PROCEDURES 6/05)
Several papers to be presented at this conference will be restricted papers governed by ITAR (International Traffic in Arms Regulations). The U.S.
citizens SAMPE list used at previous conferences will not be available. If you plan to attend any presentations restricted by ITAR, you must bring proof
of citizenship plus the other verification documents as shown below. Please note that only U.S. citizens and U.S. Resident Aliens can be considered
for attendance at these restricted presentations.
Admittance to restricted sessions and access to restricted technical papers is implemented and controlled by U.S. International Traffic in Arms Regulations
(ITAR). All restricted session attendees MUST abide by the procedures and submittal of verification documents as noted below – no exceptions:
ATTENDEE CLASSIFICATION
IDENTIFICATION & PROOF OF EMPLOYMENT REQUIREMENTS
U.S. Government Employees
1. Proof of Citizenship (for example, passport, birth certificate, voters registration card, naturalization papers), and,
2. Personal photographic identification (passport, driver’s license, corporate ID, etc.)
U.S. Citizens
1. Proof of Citizenship (for example, passport, birth certificate, voters registration card, naturalization papers), and,
2. Personal photographic identification (passport, driver’s license, corporate ID, etc.), and,
3. Certification credentials based on DD Form 2345 (see below for details)
Resident Aliens (U.S.)
1. Resident Alien Card, and,
2. Personal photographic identification (passport, driver’s license, corporate ID, etc.), and,
3. Certification credentials based on DD Form 2345 (see below for details)
DD Form 2345 individual certification credentials (required for U.S. & Resident Aliens) must be from one of the following:
1. Copy of an approved and active DD Form 2345 for the individual, or,
2. Copy of an approved and active DD Form 2345 for the individual’s employer PLUS evidence of current employment status with that employer (corporate ID, business card, etc.), or,
3. A listing of the individual’s employer in the most recent DoD quarterly Qualified U.S. Contractor Access List PLUS evidence of current employment status with that employer (corporate ID, business card, etc.).
DD Form 2345 may be downloaded and completed online in order to apply for approval to be listed on the Qualified U.S. Contractor List, www.
dlis.dla.mil/jcp/. Allow at least 4 weeks prior to the SAMPE symposia or technical conference dates for this process.
How to get your ITAR Clearance:
Bring all of the above listed identification, proof of employment and certification credentials to the to the SAMPE Clearance counter at the SAMPE
Registration area. Your documents will be verified and you will be provided with a stamp indicating your ITAR clearance. Photo ID will be checked
against your ITAR badge before admittance is granted to any ITAR presentation.
SAMPE Fall Tech Conference & Exhibits–Wichita, KS
Tuesday, October 20
Technical Program
8:00 – 9:00 AM • Room 209A
9:00 AM • Room 206
Global Materials Technology
Moderator: Carl Rousseau - ASTM D30 Committee and Lockheed Martin
Aeronautics
SAMPE Keynote Presentation
Presenter: John Pilla: Senior VP/General Manager,
Propulsion Segment, Spirit AeroSystems
The aviation industry is embarking upon a
historic transformation from all metallic fuselages to light-weight
composite aero-structures. In the decades past there has been a
six-fold increase in air traffic provided by the U.S. aviation system,
while there has been a 60 percent improvement in fuel efficiency.
Concerned with the spiraling fossil fuel consumption and its debilitating
environmental impact, we are focusing on a new paradigm shift
toward the development of disruptive, energy efficient (“green”),
global material technology for effective energy utilization and efficient
manufacturing. These emerging technologies for advanced material
and process are paving way for the future of aviation. Also, in this
era of globalization, we are growing our diverse business portfolio
through open innovations and leveraged collaborations for the costeffective and rapid implementation of these technologies. As the
premier aero-structure producer and system integrator of the aviation
industry, Spirit AeroSystems is actively and strategically engaged in
this Global Material Technology revolution.
9:00 AM • Room 204
Panel: Benchmarking of Composite Technology for Aircraft and
Marine Structures: Europe vs. USA
Panel: Damage Resistance of Composite Sandwich Structures
The purpose of this combined presentation/panel session will be to
bring together subject-matter-experts in the area of durability, damage
resistance, and damage tolerance of aerospace sandwich structures
and discuss near-term needs for standardized test methods, practices,
and/or guides. Brief presentations will be given on recent sandwich
structure DaDT certification requirements, methods of compliance, and
related field service history and repair. A panel discussion will follow,
which will focus on a strategy for development of sandwich DaDT
standards and a recommended path/plan for development. Notes will
be taken and subsequently distributed, along with presentations, to
attendees. Possible resulting new work items for ASTM Sub-Committee
D30.09 (Sandwich Structures) will then be addressed in the D30.09
meeting that afternoon.
Panelists:
• Dr. Dan Adams, University of Utah
• Mr. Mark Chris, Bell Helicopter Textron
• Mr. Wade Jackson, NASA Langley Research Center
• Dr. Paul Lagace, Massachusetts Institute of Technology
• Dr. Alan Nettles, NASA Marshall Space Flight Center
• Mr. Adam Sawicki, Boeing Company
• Dr. K. Suresh Raju, Wichita State University
Moderator: Len Poveromo - Director, Northrop Grumman
Panelists:
• Charlie Rowe – Technical Director, SCRA
• Tom Carstenson – Chief, Air Frame Development Program, Sikorsky
• Nick Melillo – Senior Manager Structures Technology, Boeing
• Paul Oldroyd – Bell Helicopter
• Bob Gray – President, Maverick Corp.
• Scott Lewit – President, Structural Composites, Inc.
• Chris Hicks – Northrop Grumman
• Danna Kelley-Haddad - Chairwoman of The Composite Consortium (TCC)
Coffee Breaks - Sponsored by
Tuesday and Wednesday
10:40 – 11:00 AM and 2:55 – 3:25 PM
Complimentary coffee will be available in the exhibition hall.
www.sampe.org
Tuesday, October 20 Technical Program
Room 209B
Room 207
Advances in Manufacturing & Out-of-Autoclave I
Resin & Plastics Technology - Non-Epoxy Systems
9:00 AM – 2nd Place Winner
9:00 AM
Session Chairs: Gail Hahn, The Boeing Company - Phantom Works; John
Russell, AFRL/RXMT; and Amit Vyas, Spirit AeroSystems Inc.
Advanced Composite Cargo Aircraft, J. D. Russell, Air
Force Research Laboratory, Wright-Patterson Air Force Base,
OH; B. Shenk, R. Holzwarth, Air Force Research Laboratory,
Wright-Patterson Air Force, Base, OH; M. Swanson, D. Paige,
M. Tresnak, S. Ames, Lockheed Martin Aeronautics Company,
Palmdale, CA; P. Neumeier, Lockheed Martin Aeronautics
Company, Marietta, GA
9:25 AM
ITAR
Prototype Fabrication and Assembly of Large Scale Integrated
Out-of-Autoclave (OOA) Structures, G. Rossi, J. D. Russell, Air
Force Research Laboratory, Wright-Patterson AFB, OH
9:50 AM
Properties of an Out-of-Autoclave Prepreg Material: Oven Versus
Autoclave, J. Courter, J. Dustin, A. Ritchey, R. B. Pipes, Purdue University,
West Lafayette, IN; L. Sargent, W. Purcell, Applied Composites Engineering,
Indianapolis, IN
10:15 AM
Non-autoclave Prepreg Manufacturing Technology for Primary
Aerospace Structure, G. Hahn, G. G. Bond, The Boeing Company,
Berkeley, MO
11:00 AM
Low Cost, Short Lead Tooling for Limited Use and Lower Temperatures,
N. Froeschner, J. M. Griffith, The Boeing Company, St. Louis, MO
11:25 AM
Advanced Materials and Technologies for Wide-body Aircraft
Structures, L. B. Rosa, F. D. R. Amado, UESC – Universidade Estadual de
Santa Cruz, Brazil
Session Chairs: Axel Böettcher, Boettcher Consult; Jeff Wiggins, University of
Southern Mississippi; and Volker Altstädt, Universitaet Bayreuth
Impact of Cure Environment on Mechanical Properties and Network
Morphology of Vinyl Ester Resin Systems, J. Swanson, J. W. Rawlins,
University of Southern Mississippi, Hattiesburg, MS
9:25 AM
New Developments in Polyaryl Ether Amide Resin Technology, F.-A.
von Itter, B. Schafran, Evonik Degussa GmbH, Marl, Germany
9:50 AM
Reactive Rotational Molding of Thermoset Polyurethane: Application
to H2 Storage Liner Production, J. Viale, F. Nony, L. Delnaud, P.
Mazabraud, CEA Le Ripault, Monts, France; J.-F. Gerard, UMR 5223
– INSA Lyon, Villeurbanne, France; A. Tcharkhtchi, PIM – ENSAM Paris,
Paris, France; A. Baron, Raigi, Rouvray St. Denis, France
10:15 AM
Benzoxazine Resins for Composite Materials - Recent Developments,
R. Schönfeld, S. Kreiling, C. Sawaryn, A. Taden, Henkel AG & Co. KGaA,
Düsseldorf, Germany
11:00 AM
Effects of Annealing on Mechanical Properties of Uniaxial Oriented
Polypropylene Film, M. Deevey, B. Chen, J. Chung, Frontier Performance
Polymers Corporation, Dover, NJ; J. Song, M. Sennett, US Army, RDECOM
- NSRDEC, Natick, MA; T. Woo, US Army, RDECOM - ARDEC, Picatinny
Arsenal, NJ
Room 207
Epoxy Resin Technology I
Session Chairs: Axel Böettcher, Boettcher Consult; Jeff Wiggins, University of
Southern Mississippi; and Volker Altsadt, Universitaet Bayreuth
11:25 AM
11:50 AM
Morphing Mold Tools, B. Halford, Surface Generation Ltd, London, UK
Room 205
Atomistic Modelling of Crosslinked Epoxy Polymer, A. Bandyopadhyay,
P. K. Valavala, G. M. Odegard, Michigan Technological University,
Houghton, MI
11:50 AM
Sensors in Aerospace Systems
Session Chair: Anindya Ghoshal, United Technologies Research Center
9:00 AM
Structural Health Monitoring of Carbon Fiber Composites Using
Inherently Conducting Polymeric Films, A. K. Singh, D. Kim, H. Yang,
B. W. Pitts, G. J. Tregre, Crosslink, Hattiesburg, MO; P. J. Kinlen, Crosslink,
St. Louis, MO
9:25 AM
Metallized Carbon Nanofiber Based Nanocomposites for
Electrochemical Sensing, L. Li, K. Lafdi, University of Dayton Research
Institute, Dayton, OH
9:50 AM
Visibility of Viscoelastic Properties During Processing of Fiber
Reinforced Thermoset Resin Systems, L. Dorworth, Abaris Training
Near IR Kinetics and Correlation of Cure of Epoxy Resins, M.
Pramanik, J. O. Swanson, J. A. Scott, S. K. Mendon, J. W. Rawlins, The
University of Southern Mississippi, Hattiesburg, MS
Visit our 120+ exhibitors in the
Century II Convention Hall!
Tuesday 10:00 AM - 4:00 PM
Wednesday 10:00 AM - 4:00 PM
Resources Inc., Reno, NV
10:15 AM
The Embedding of Optical Fibre Sensors for SHM, M. Volanthen, L.
Rumsey, R. Caesley, Insensys, Fareham, UK; A. Ghoshal, G. Welsh, United
Technologies Research Center, East Hartford, CT; N. Bordick, US Army
RDECOM, Fort Eustis, VA
Coffee Breaks - Sponsored by
Tuesday and Wednesday
10:40 – 11:00 AM and 2:55 – 3:25 PM
Complimentary coffee will be available in the exhibition hall.
SAMPE Fall Tech Conference & Exhibits–Wichita, KS
Tuesday, October 20 11:00 AM • Room 205
Featured Lecture - The Role of Education in
Composites Engineering
Lecturer: Beckry Abdel-Magid: Chair, Composite
Materials Engineering, Winona State University
In the early 1990s, leaders in the composite
materials industry declared that the major
problem with composite materials was neither technical nor economic,
but rather educational, and called for shifting the emphasis in the
academic community from focusing on research and development to
educating and graduating large numbers of engineers with broad
and in-depth knowledge in composite materials.
A number of universities responded by developing strong programs
in composites engineering both at the undergraduate and graduate
levels. In the subsequent two decades, graduates of these programs
were in the forefront of a second revolution not only in new applications
in myriad products and industries, but also in the material and
processing technologies of composite materials. This presentation
will highlight the role of education in taking composite materials from
artisan fabrication and laboratory research to advanced technology
and applications ranging from aerospace, to consumer goods and
nano-scale materials. A review of the current state of education in
composites engineering in the United States and other industrial
nations will also be presented.
Technical Program
Panelists:
• John L. Graham, Ph.D., University of Dayton Research Institute
• Donald Minus, Fuels & Energy Branch, AFRL
• Omar Mendoza, Materials Engineer, AFRL
• Tim Edwards, Fuels & Energy Branch, AFRL
• James Hileman, Research Engineer, Massachusetts Institute of Technology
• Kevin Trayer, USAF Reserves, Air Mobility Command Fuel Efficiency Office
• Gregory L. Rhoads, Fuels & Energy Branch, AFRL
Room 209B
Advances in Manufacturing & Out-of-Autoclave II
Session Chairs: Gail Hahn, The Boeing Company - Phantom Works; John
Russell, AFRL/RXMT; and Amit Vyas, Spirit AeroSystems Inc.
1:40 PM
ITAR
The Cure Cycle Reduction of Advanced High Temperature
Polyimide, E. Stone, B. Pinkerton, A. Arhelger, Vought Aircraft
Industries, Dallas, TX
2:05 PM
Optimization of Composite Ply Kits, J. A. Petermeier, R. P. Willardson,
K. R. Wilkinson, eServ, A Perot Systems Company, Plano, TX
2:30 PM
Experimental Study of Milling Bifurcations, A. Radhakrishnan, J.
Kennedy, R. Fales, University of Missouri - Columbia, Columbia, MO
Room 205
The Role of Education in Composites Engineering
Session Chair: Brad Jorgenson, South Dakota School of Mines & Technology
11:50 AM
Experimental Characterization of Composite Materials Across
the Curriculum, B. Abdel-Magid, M. Grami, S. Ziaee, Winona State
University, Winona, MN
Room 208
Design & Analysis of Composite Structures I
Session Chairs: Brian Kitt, Spirit AeroSystems Inc.; Phil Sears, eServ; and
Walter Horn, Wichita State University
11:00 AM
Scatter Analysis of Composites and Adhesive Joints for Substantiation
of Modern Aircraft Structures, W. Seneviratne, J. S. Tomblin, National
Institute for Aviation Research, Wichita, KS
11:25 AM
The Buckling Response of Tapered Composite Plates Based on Thirdorder Theory, S. Akhlaque-E-Rasul, R. Ganesan, Concordia University,
Montreal, Canada
11:50 AM
Asymmetric and Tension-shear Coupling Model Based on NonOrthogonal Constitutive Law for Dry Fabric Composites, W. Lee, M.K. Um, J.-H. Byun, KIMS, Changwon, South Korea
1:15 PM • Room 204
Panel: Energy Issues in Aviation
Moderators: Wade Adams - Director of the Center for Nanoscale Science and
Technology, Rice University; Don Erbschloe - Chief Scientist, Air Mobility Command;
and Gregory L. Rhoads - AFRL Propulsion and Power Directorate.
This panel presentation and discussion will cover the broad issues in
energy needs, availability and opportunities for aviation, including
new technologies and applications, alternative fuels, operational
strategies for conservation, and climate change issues.
www.sampe.org
Tuesday, October 20 Room 208
Design & Analysis of Composite Structures II
Session Chairs: Brian Kitt, Spirit AeroSystems Inc.; Phil Sears, eServ; and
Walter Horn, Wichita State University
1:40 PM
Simple Analytical Techniques for Laminated Cylinders and Plates, T.
Fronk, S. L. Folkman, E. Clark, Utah State University, Logan, UT
2:05 PM
21st Century Analysis and Design of Composite Flight Vehicle
Structures Using an FEA-Based Electronic Handbook, S. J. Leemans,
Advatech Pacific, Tempe, AZ
2:30 PM
Bridging the Gap Between Physics and Large-scale Structural
Analysis: A Novel Method for Fatigue Life Prediction of Composites,
R. Fertig III, Firehole Technologies, Laramie, WY
3:25 PM
Simulating Impact Damage to Composite Structures, A. Hsu, NEi
Software Inc., Westminster, CA
Room 206
3-D Nanostructured Advanced Composites
Session Chairs: Brian Wardle, MIT; and Larry Drzal, Michigan State
University
1:40 PM
Health Monitoring of Aligned Carbon Nanotube (CNT) Enhanced
Composites, D. M. Barber, S. S. Wicks, B. L. Wardle, Massachusetts
Institute of Technology, Cambridge, MA; A. Raghavan, C. T. Dunn, S. S.
Kessler, Metis Design Corporation, Cambridge, MA
2:05 PM
Towards Multifunctional Enhancement of Composite Aerostructures
via the Incorporation of Aligned Carbon Nanotubes, M. S. Tsai, R.
Guzman de Villoria, B. L. Wardle, Massachusetts Institute of Technology,
Cambridge, MA
2:30 PM
Polymer-based Carbon Nanotube Composites in the Space
Environment, L. Daniel, MIT, Boston, MA; M. Chipara, The University of
Texas Pan American, Edinburg, TX
3:25 PM
3:50 PM
Composite Aircraft Assemblies: The Complete Solution, O. Guillermin,
Vistagy, Waltham, MA
Investigation of Nanostructure Effects and Interactions on the Elastic
Properties of Buckypaper-polymer Nanocomposites, C. Tsai, C.
Zhang, A. Vanli, B. Wang, Florida State University, Tallahassee, FL
4:15 PM
Quantitative Microstructural Analysis of a Nylon 6,6/E-Glass Long
Fiber Thermoplastic Composite, V. S. Chevali, U. K. Vaidya, G. M.
Janowski, The University of Alabama at Birmingham, Birmingham, AL
4:40 PM
Design and Analysis Methods for Composite Load Introduction
Fittings, P. Middendorf, M. Siemetzki, T. Havar, K. Zimmermann, EADS
Deutschland GmbH, Innovation Works, Munich, Germany
Room 205
3:50 PM
Processing and Properties of Functionalized Graphite Nanoplatelet/
Epoxy Composites, Z. Wang, H. T. Hahn, UCLA, Los Angeles, CA; D.
Wang, L.-S. Tan, Air Force Research Laboratory, Wright-Patterson AFB,
OH
4:15 PM
Optimal Matching of Thermal Vibrations into Carbon Nanotubes,
K.G.S.H Gunawardana, K. Mullen, The University of Oklahoma, Norman,
OK
Room 207
Damage Tolerance & Fracture Mechanics
Session Chairs: Waruna Seneviratne, National Institute for Aviation Research;
and Rick Willardson, eServ
1:40 PM
Computational Simulation of Progressive Damage in Composite
Stiffened Panels with Discrete Source Damage, H. Zhang, F. Abdi,
Alpha STAR Corporation, Long Beach, CA
2:05 PM
Robust Design of Assembled Composite Joining Concepts, a
Combined Durability-Reliability Evaluation, F. Abdi, F. Rognin, Alpha
STAR Corporation, Long Beach, CA; J. Housner, Analytical Enterprises,
Newport News, VA; K. Nikbin, Imperial College of London, UK
2:30 PM
Load Rate Effects on the Crush Response of Laminated Corrugated
Beams, S. Keshavanarayana, K. Y. Tan, S. F. Elyas, Wichita State
University, Wichita, KS
3:25 PM
Rate Sensitivity of Fracture Toughness of Laminated Composites, S.
Keshavanarayana, P. N. Nandakumar, Wichita State University, Wichita,
KS
3:50 PM
Damage Tolerance of Full-scale Notched Composite Sandwich
Panels, Keshavanarayana, J. Tomblin, Wichita State University, Wichita,
KS; P. Shyprykevich, C. Davies, FAA William J. Hughes Technical Center,
Atlantic City, NJ
10
Technical Program
Epoxy Resin Technology II
Session Chairs: Axel Böettcher, Boettcher Consult; Jeff Wiggins, University of
Southern Mississippi; and Volker Altstädt, Universitaet Bayreuth
1:40 PM
Effect of Amine Isomerism on Glass Transition and Free Volume
of Epoxy-Amine Network Based on Glycidyl Ether of BisphenolF (DGEBF) and Diaminodiphenyl Suffone (DDS), M. Kaushik, M.
B. Jackson, S. R. Heinz, J. S. Wiggins, S. Nazarenko, The University of
Southern Mississippi, Hattiesburg, MS
2:05 PM
Measuring Compression Strain Recovery in Thermoset Matrices
Using Digital Image Correlation, S. Heinz, J. Wiggins, The University
of Southern Mississippi, Hattiesburg, MS
2:30 PM
Mechanical Properties and Network Structure of Blended Epoxy
Resins, M. Pramanik, J. O. Swanson, J. A. Scott, S. K. Mendon, J. W.
Rawlins, The University of Southern Mississippi, Hattiesburg, MS
3:25 PM
Characterizing Fortified Epoxy Amine Matrixes with Latent Uretdione
Crosslinking Agents, J. Rawlins, K. Davis, The University of Southern
Mississippi, Hattiesburg, MS
3:50 PM
The Effect of Different Matrix Materials on the Properties of Structural
Composites Fabricated from Waste Carpet, A. Jain, G. Pandey, R.
Vaidyanathan, R. P. Singh, Oklahoma State University, Stillwater, OK
SAMPE Fall Tech Conference & Exhibits–Wichita, KS
Tuesday, October 20 Technical Program
4:15 PM
Specialty Anhydrides for High-Performance Composites, K. Shah,
Evonik Jayhawk Fine Chemicals Corporation, Galena, KS
4:40 PM
Technical Advances in Epoxy Technology for Wind Turbine Blade
Composite Fabrication, G. C. Jacob, B. Hoevel, H. Q. Pham, M. L. Dettloff,
N. E. Verghese, R. H. Turakhia, G. Hunter, Dow Chemical Co., Freeport,
TX; J. F. Mandell, D. D. Samborsky, Montana State University, Bozeman, MT
Room 209B
Tooling Advancements
Session Chairs: Carl Fiegenbaum and Jeff Priest, Spirit AeroSystems Inc.
3:25 PM
Rapid Manufacturing of Large Master Models and High Temperature
Resistant Tools, W. L. Miller, P. D. Christou, D. Howland, Huntsman
Advanced Materials, The Woodlands, TX
3:50 PM – 1st Place Winner
900°F Glass Transition Temperature Material for Structural
Composites and High Temperature Composite Tooling
Applications, J. E. Lincoln, Z. McHale, R. J. Jurek, S. L. Hout, D.
B. Curliss, Performance Polymer Solutions Inc., Moraine, OH
4:15 PM
Machining, Bonding, Sealing, and Venting of Carbon Foam for
Production Tooling, D. M. Kaschak, R. Shao, G. D. Shives, A. J. Francis,
GrafTech International, Parma, OH
4:40 PM
Nanocomposite Mold Fabrications and Applications, K. Han, B.
Rice, J. Hickey, T. Glenchur, D. Johnson, J. Hartings, University of Dayton
Research Institute, Dayton, OH
Room 204
Ballistic Composites
Session Chair: John F. Osterndorf, USA, RDECOM-ARDEC
3:25 PM
Low and Medium Speed Multi-axial Impact Responses of Fiber
Reinforced Thermoplastic and Thermoset Composites, B. Chen, O.
Kizhner, O. Chainani, J. Chung, Frontier Performance Polymers Corporation,
Dover, NJ; T. Woo, L. Moy, J. Osterndorf, D. Prillaman, US Army, RDECOMARDEC; R. Basavaraju, US Army, TARDEC; J. Song, US Army, NSRDEC; B.
Liaw, F. Delale, City College of New York, New York, NY
3:50 PM
The Ballistic Impact Resistance of Polypropylene Composites,
R. Roylance, T. Godfrey, E. Welsh, US Army Natick Soldier Research
Development & Engineering Center, Natick, MA
Room 204
Automated Tape Placement/Automated Fiber Placement
Session Chair: Brice Johnson, Boeing Phantom Works
4:15 PM
Machine-Independent Automated Fiber Placement Programming
and Simulation, J. Schule, CGTech, Irvine, CA
4:40 PM
Tow Steered CFRP Aircraft Parts – Preforming and Mechanical
Properties, K. Hazra, K. Potter, M. Wisnom, ACCIS, University of Bristol,
Bristol, UK
5:00 – 6:00 PM Upper Gallery
Welcome Reception
Join us for the Welcome Reception, an excellent place to network
with new and existing colleagues and business partners.
www.sampe.org
11
Wednesday, October 21 8:00 – 9:00 AM • Room 209A
Technical Program
Room 209B
SAMPE Keynote Presentation
Materials and Processing & Manufacturing
Technology: A Rich History and Promising Future
Presenter: Persis A. Elwood - Division Chief,
Materials & Manufacturing Directorate, WPAFB
As the world has gotten flatter, the defense industry has gotten
smaller. Globalization and decreased demand have impacted many
industries that supply the Air Force and DoD. There is also increased
competition for critical commodities – energy and specialty metals,
for example. Internal to the Air Force the two communities, materials
and processing and manufacturing technology, have shared a very
productive relationship. The communities share the same customer
base, and the breadth of products and disciplines are the same.
We are different links in the same chain. In order for materials and
processing to deliver to their potential, it is essential that manufacturing
readiness be considered earlier than ever before in the development
cycle. By partnering more effectively we can help ensure scale up and
timely transition of new capabilities.
9:00 AM • Room 206
Panel: Commercializing Composites: The Outlook for HighVolume, Sustainable Material Applications
Moderator: Sara Black - Technical Editor, Gardner Publications, CompositesWorld
The focus of this panel will be successful real-world, non-aerospace
applications of composite materials. While the composites industry
has been challenged by the design and manufacturing demands of
lucrative, high-volume markets, the barriers are starting to break
down — particularly as alternative energy sources, infrastructure
upgrades, and new industrial technologies begin to shape policy
decisions. Panelists will address application areas including wind
energy, offshore oil exploration and production, infrastructure,
pressure vessels for fuel and compressed gas storage, automotive
components and composite design. They will describe how composite
materials, processing and design concepts are being used in specific
market areas, in innovative ways — and how the material or process
or design approach is helping to facilitate composites’ growth, in light
of the current difficult economy.
Panelists:
• Dr. Vistaph Karbhari, University of Alabama, Huntsville
• Paul Oldroyd, Bell Helicopter Textron
• James Patterson, HyPerComp Engineering
• Chris Red, Composite Market Reports
• Andrew Rich, Plasan Carbon Composites
• Thomas Royle, Gurit
Technologies to Assist Composite Manufacturers I
Session Chairs: Jim Leslie, ACPT Inc.; Linda Clements, C&C Innovation
Strategies Inc.
9:00 AM
Technology Gained from Composite Development Programs, J. C.
Leslie, Advanced Composite Products & Technology, Huntington Beach,
CA
9:25 AM
New Low/No VOC Coating Technologies for Composite
Applications, M. O. Wells, K. A. Wood, S. Lacock, Arkema Inc., King
of Prussia, PA
9:50 AM
Nano-fiber Reinforced Enhancements in Composite Polymer
Matrices, C. Chamis, NASA Glenn Research Center, Cleveland, OH
10:15 AM
Specialty Building Blocks for Composites: An Overview, K. Shah,
Evonik Jayhawk Fine Chemicals Corporation, Galena, KS; T.-P. Sauer,
Evonik Degussa GmbH, Marl, Germany
11:00 AM
Developing Breakdown Tooling from Initial Concept Stage Through
Final Production, R. Starck, Paragon D&E, Grand Rapids, MI
11:25 AM
Cleaning for Effective Coating of Composites, B. Kanegsberg, E.
Kanegsberg, BFK Solutions LLC, Pacific Palisades, CA
11:50 AM
Tooling for Composite Materials: Problems and Solutions, L. L.
Clements, J. L. Crowley, C&C Innovation Strategies Inc., Dayton, NV
Room 208
Testing & Qualification of Materials
Session Chairs: Beth Clarkson, NASA National Center for Advanced Materials
Performance
9:00 AM
Multivariate Equivalence Testing for Composite Materials, E.
Clarkson, National Institute for Aviation Research, Wichita, KS
9:25 AM
Evaluation of Cubic Specimens for Compression Testing at Different
Strain Rates, J.F. Acosta, K. S. Raju, Wichita State University, Wichita,
KS
9:50 AM
Mechanical Behavior of Woven Thermoplastic Composites Under
Varying Strain Rates, U. Sharma, G. Reyes, University of MichiganDearborn, Dearborn, MI
10:15 AM
Modified Coefficient of Variation Approach to set Basis Values for
Newly Developed Composite Materials, E. Clarkson, Y. Ng, Wichita
State University, Wichita, KS
Visit our 120+ exhibitors in the
Century II Convention Hall!
Tuesday 10:00 AM - 4:00 PM
Wednesday 10:00 AM - 4:00 PM
12
11:00 AM
Impact Strength of Hybrid Fiber-Reinforced Polymers at Cryogenic
Temperatures, M. Lambert, E. A. Clark, T. H. Fronk, Utah State University,
Logan, UT; J. Noorda, HyPerComp Engineering Inc., Brigham City, UT
11:25 AM
Representing Viscoelastic Response of a Curing Laminate, M. Stover,
B. Kelpine, AvPro Inc., Norman, OK
SAMPE Fall Tech Conference & Exhibits–Wichita, KS
Wednesday, October 21 11:50 AM
Simple Destructive Test Methodology to Determine the Mechanical
Bond Strength of Coatings on Ceramic Fibers, J. Lincoln, R. J. Jurek,
D. B. Curliss, M. Grigsby, M. Napoli, Performance Polymer Solutions Inc.,
Moraine, OH; M. Rich, L. T. Drzal, B. Rook, Michigan State University, East
Lansing, MI
Room 204
Nanocomposites and Multifunctional Materials
Session Chair: Bob Minaie, Wichita State University
9:00 AM
Multifunctional Carbon Fiber Epoxy-matrix Composites for Energy
Harvesting, S. Han, S. Wang, D. D. L. Chung, State University of New
York, Buffalo, NY
9:25 AM
Nanotube Buckypaper Composite Actuators for Morphing Structure
Applications, S.-Y. Tsai, I.-W. Chen, Z. Liang, B. Wang, C. Zhang, FAMUFSU College of Engineering, Tallahassee, FL; S. Walsh, Army Research
Laboratory (ARL), Aberdeen Proving Ground, MD
9:50 AM
Thermoplastic Polyurethane Elastomer-Clay and -Carbon Nanofiber
Nanocomposites: Flammability Studies, J. H. Koo, K. C. Nguyen, J. C.
Lee, W. K. Ho, M. C. Bruns, O. A. Ezekoye, University of Texas at Austin,
Austin, TX
10:15 AM
Influence of Nanoparticles on the Thermal and Mechanical Properties
of PMR-15 and Candidate Replacement Resins, S. G. Miller, NASA
Glenn Research Center, Cleveland, OH; P. Heimann, Ohio Aerospace
Institute, Cleveland, OH; M. Maryanski, University of Akron, Akron, OH; J.
Bauer, University of Michigan, Ann Arbor, MI
11:00 AM
Dispersion Optimization of Exfoliated Graphite Nanoplatelets in
Polyetherimide Nanocomposites: Extrusion vs Precoating vs Solid
State Ball Milling, H. Wu, B. Rook, L. T. Drzal, Michigan State University,
Lansing, MI
11:25 AM
Multifunctional Exfoliated Graphite Nanoplatelets/High Density
Polyethylene Nanocomposites, X. Jiang, L. T. Drzal, Michigan State
University, Lansing, MI
11:50 AM
Composite Films Prepared by Deposition of Manganese Dioxide
and Polypyrrole on In-Situ Grown Carbon Nanotubes for
Supercapacitors, L. Li, K. Lafdi, University of Dayton Research Institute,
Dayton, OH
Room 205
Composite Foams
Session Chairs: David Kaschak, Graftech; James Klett, Oak Ridge National
Laboratory; and Ed Semmes, Consultant
9:00 AM
Flexible Molded Polyurethane Foams with Clay and Silica NanoFillers, I. Javni, K. Song, J. Lin, Z. S. Petrovic, Kansas Polymer Research
Center, Pittsburg State University, Pittsburg, KS
9:25 AM
Graphite Foam Performance in Heat Exchanger Applications, P. G.
Stansberry, E. Pancost, Y. Xiong, J. Norley, GrafTech International Holdings
Inc., Parma, OH
www.sampe.org
Technical Program
9:50 AM
Tensile Strength of Aluminum Foam-Polypropylene Interpenetrating
Phase Composites, J. Hadley, N. Rayess, N. Dukhan, University of Detroit
Mercy, Detroit, MI; D. Q. Houston, Ford Motor Company, Dearborn, MI
10:15 AM
Coal Derivatives for Sprayable Carbon Foams, E. B. Kennel, M. E.
Heavner, M. Mukka, O. A. Olajide, C. Prasad, P. Subramanian, A. H.
Stiller, West Virginia University, Morgantown, WV
Room 207
Epoxy Resin Technology III
Session Chairs: Axel Böettcher, Boettcher Consult; Jeff Wiggins, University of
Southern Mississippi; and Volker Altstädt, Universitaet Bayreuth
9:00 AM
A Nanoscale Investigation of Epoxy Resin Nodule Development, C.
Sahagun, S. Morgan, University of Southern Mississippi, Hattiesburg, MS
9:25 AM
Fast Composite Production with Reactive Epoxy Resins, M. Döring,
U. Arnold, A. Schmidt, Karlsruhe Research Center, Baden-Wuerttemberg,
Germany
9:50 AM
Aspects of High-volume Series Production with High Performance
Fibre-reinforced Plastics, V. Altstädt, J. Krämer, B. Uwe, University of
Bayreuth, Bayreuth, Germany
11:00 AM • Room 205
Featured Lecture - Metal Composite Hybrid
Materials and Products
Lecturer: Jim Stevenson - Corporate Composite Fellow,
Honeywell Aerospace
A hybrid metal-composite structure has the
potential advantages of combining the best properties of metals
and composite materials–synergies that can lead to exceptional
performance–along with the challenges of interfacing these dissimilar
materials. This talk will examine the rationale for hybrids and several
applications: fiber metal laminates and 3D structures including turbine
blades, flow control valves, structural housings, avionics chassis and
molten metal bonded links.
Room 207
Bio-, Natural and Innovative Materials I
Session Chairs: Borys Schafran, Evonik Degussa Corporation; and Warren
Hatfield, Hawker Beechcraft
11:00 AM
New Bio-based Polyurethane Resins for Composites and Polymeric
Concrete, I. Javni, M. Ionescu, D. P. Hong, Z. S. Petrovic, Pittsburg State
University, KPRC, Pittsburg, KS
11:25 AM
Novel Monomer Process for Parylene Coating Applications, C. Lee,
A. Kumar, Dielectric Systems Inc., Fremont, CA; M. Capalongan, Stratamet
Inc., Fremont, CA
11:50 AM
Structure-Properties Relationship of Polyimides Derived from
Different Composition of Diamines and Dianhydrides, Q. Luo, N. Bilic,
Z. Petrovic, Kansas Polymer Research Center, Pittsburg State University,
Pittsburg, KS
13
Wednesday, October 21 Technical Program
Room 204
1:15 – 2:55 PM Room 206
Panel: Design and Analysis Tool Demonstration
Moderator: DeWayne Howell, President, Peak Composites Inc.
Every trade has its tools. Carpenters use hammer and saw, painters the
brush and roller, and plumbers the wrench and torch. As engineers in
the field of composites, we also require tools to do our job. In particular,
we rely on our software tools to help us analyze laminates, process
materials, and design structures. It would be quite a benefit if there
were one place you could go to see a variety of these software tools
in action and have a chance to compare them versus your specific
needs. Panelists will present their respective software packages for
you to review and give you the opportunity to get your questions
answered by the experts.
Panelists:
Nanofiber Technology, Uses
Session Chair: Frank Ko, University of British Columbia
1:40 PM
Recent Progress in Carbon Nanotube Fibers and Yarns, F. Ko, Y.
Wan, AMPEL, The University of British Columbia, Vancouver, Canada
2:05 PM
Nanoclay Reinforced Flax Nanocomposite by Electrospinning, C. Wang,
F. K. Ko, M. Alcock, The University of British Columbia, Vancouver, Canada
2:30 PM
Manufacturing Neat SWCNT Fibers from Reduced SWCNT in DMSO,
J. Guan, L. Tay, B. Simard, National Research of Canada, Ottawa, Canada
3:25 PM
Superhydrophobic Behavior of Electrospun Micro and Nanofibers,
M. Ceylan, R. Asmatulu, W. Khan, Wichita State University, Wichita, KS;
N. Nuraje, Massachusetts Institute of Technology, Cambridge, MA
• Craig Collier, Collier Research Corporation
• John Tierney, University of Delaware Center for Composite Materials
• Jason Gies and Dr. Ray Fertig, Firehole Technologies Inc.
• Dr. Sungk Ha, Think Composites
• DeWayne Howell, Peak Composites Inc.
3:50 PM
Room 208
Bio-, Natural and Innovative Materials II
Core & Sandwich Materials
Properties of Recycled PVC and PS Nanocomposite Fibers at Various
NiZn Ferrite Loadings, R. Asmatulu, V. Dandin, W. Khan, Wichita State
University, Wichita, KS
Room 207
Session Chair: Abhishek K. Singh, Crosslink
Session Chairs: Borys Schafran, Evonik Degussa Corporation; and Warren
Hatfield, Hawker Beechcraft
1:40 PM
1:40 PM
Mechanical Properties of Laser-Welded Grade 9 Titanium
Honeycomb Core, G. Jones, Benecor Incorporated, Wichita, KS
2:05 PM
Electrically Conductive Hollow Carbon Microspheres in a Polymer
Matrix, C. Walls, A. Simpson, BAM Inc., Knoxville, TN
Chopped Prepregs - A Compelling Performance and Cost Alternative
Material Form, J. D. Fudge, Blackbird Composites, San Ramon, CA
2:05 PM
Biobased Adhesives for Wood and Metal, A. Zlatanic, Z. S. Petrovic,
Kansas Polymer Research Center, Pittsburg, KS
2:30 PM
2:30 PM
Interfacial Fracture Properties of Novel Carbon Foam Sandwich Structures,
S. Rangaraj, G. Reyes, University of Michigan Dearborn, Dearborn, MI
3:25 PM
Effect of Core Shear Modulus on the Transmission Loss of Composite
Honeycomb Panels, T. Wang, J. Maxon, D. Hornick, A. Foose, J. Fila,
Gulfstream Aerospace Corporation, Savannah, GA
Examination of a Low Temperature Paste Adhesive as an Alternative
to Film Adhesives for Process Cost Reduction, D. Klapprott, Henkel
Aerospace, Bay Point, CA
3:25 PM
Vegetable Oil Based Epoxy Resins, D. P. Hong, I. Javni, Z. S. Petrovic,
Pittsburg State University, KPRC, Pittsburg, KS
3:50 PM
3:50 PM
Mechanical Properties of Sandwich Composites from Recycled Tires,
A. Bhadra, G. Pandey, R. Vaidyanathan, R. P. Singh, Oklahoma State
University, Stillwater, OK
Creep Friction of Neoprene on Graphite Epoxy, S. J. Mills, United
Launch Alliance, Trinity, AL
4:15 PM
Thermal and Mechanical Studies of Wood Flour Reinforced
Polyurethane Composites, G. T. Strawder, M. V. Hosur, S. Jeelani, Y.
Zhou, Tuskegee University, Tuskegee, AL
Room 209B
Coffee Breaks - Sponsored by
Technologies to Assist Composite Manufacturers II
Session Chairs: Jim Leslie, ACPT Inc; Linda Clements, C&C Innovation
Strategies Inc.
1:40 PM
Tuesday and Wednesday
10:40 – 11:00 AM and 2:55 – 3:25 PM
Complimentary coffee will be available in the exhibition hall.
A Comparison of the Environmental Attributes of Thermoplastic vs. Thermoset
Composites, M. Favaloro, Ticona Engineering Polymers, Amesbury, MA
2:05 PM
The Basics of Materials Engineering, S. Peters, Process Research,
Mountain View, CA
2:30 PM
Performance of New Repair Adhesives in State-of-Art Structural
Composite Repairs, S. Lehmann, O. Lammerschop, Henkel Corporation,
Bay Point, CA
14
SAMPE Fall Tech Conference & Exhibits–Wichita, KS
Wednesday, October 21 Technical Program
Room 205
Room 209B
Infusion Technology - Applications
Building Blocks to Advanced Materials Applications
1:40 PM
3:25 PM
Session Chair: Dirk Heider, University of Delaware
A New Empirical Approach to Predict Microcracking in Composites
– Resin and Fiber Preform Effects, Y. Yoon, X. Fang, W. W. Lin, GE
Global Research, Niskayuna, NY; J. A. Woods, The Boeing Company,
Seattle, WA
2:05 PM
Design and Fabrication of VARTM Fabricated Skin Panels with
Integrated Hollow Stiffeners, D. Heider, P. Schulze, J. Tierney, J. W.
Gillespie, Jr., University of Delaware, Newark, DE
2:30 PM
Cost Effective Production and Lightweight Transportation Frames
Made in Tri Dimensional Composite Materials, J. Verhaeghe, G.
Nouwen, J. Kustermans, Acrosoma NV, Lokeren, Belgium
3:25 – 5:00 PM Room 206
Panel: Technologies to Assist Composite Manufacturers
Moderator: Linda Clements - Chief Executive Officer, C&C Innovation
Strategies
Many exciting technologies have emerged in recent years that may
be of significant assistance in the manufacturing of composites.
Unfortunately, in many cases a manufacturer with a problem now
either does not have access to details of these technologies or finds
that they are not yet ready for practical application. This panel of
experts is here to address your questions about manufacturing with
practical solutions.
Panelists:
•Dr. Jim Leslie, ACPT Inc.
•Louis Dorworth, Abaris Training Inc.
•Dr. Frances Abrams, US Air Force Research Laboratory
•Dr. Tracy Colwell, Lockheed Martin Space Systems
Session Chair: Michael Knight, Teijin Aramid USA
Prosthetics and Orthotics Manufacturing Initiative (POMI): Composite
Socket Testing and Novel Design and Fabrication Paradigm, C. W.
Norfolk, J. Osborn, SCRA / ARDI, Anderson, SC
3:50 PM
Toxicity of Nanomaterials and Recent Developments in Protection
Methods, R. Asmatulu, E. Asmatulu, A. Yourdkhani, Wichita State
University, Wichita, KS
4:15 PM
Increasing the Efficiency of Pharmaceutical Drugs for Magnetic
Targeted Drug Delivery, H.L. Wamocha, R. Asmatulu, M. M. El-Tabey,
H. Misak, J. S. Gopu, B. Cooper, J. Ho, and H. H. Hamdeh, Wichita State
University, Wichita, KS
4:40 PM
ImpacGard® for Long Lasting Protection in Transportation
Applications, M. Kubota, J. W. Long, Kubota Research Associates Inc.,
Hockessin, DE; S. Yarlagadda, University of Delaware, Newark, DE
6:00 - 8:00 PM Hyatt Regency Hotel, Eagle Ballroom
SAMPE’s Night on the Kansas Prairie
Prepare for a “genuine, honest-to-goodness, sky’s the limit, good
time” at our “Kansas Saloon”.
Join us for food, fun and entertainment. The fun begins on Wednesday
from 6:00 – 8:00 PM at the Hyatt Regency’s Eagle Ballroom.
Tickets are included with a full-package registration. Additional
tickets can be purchased for $55 at the Additional Purchases Counter
in the SAMPE Registration Area.
Room 205
Infusion Technology - Resins/Preforms
Session Chair: Dirk Heider, University of Delaware
3:25 PM
High Service Temperature Polymer Matrix Composite Process
Development, C. Homrighausen, A. Mereness, Eltron Research &
Development Inc., Boulder, CO
3:50 PM
Chopped Carbon Fiber Airplane Propeller Spinner, M. Janney,
E. Geiger, Jr., T. Gunder, N. Baitcher, R. Johnson, Materials Innovation
Technologies LLC, Fletcher, NC
4:15 PM
Continuous Process Chain for Robot Stitched Preforms, J. Filsinger,
EADS Deutschland GmbH, Munich, Germany
4:40 PM
Cost-efficient Preforming Process for Complex High-performance
Fibre-reinforced Composites: Mechanical Properties, U. Beier, J.
K. W. Sandler, V. Altstädt, Polymer Engineering, University of Bayreuth,
Bayreuth, Germany; H. Spanner, C. Weimer, Eurocopter Deutschland
GmbH, Munich, Germany
SAMPE Technical Communities Meeting
Join us on Wednesday, October 21, 2009 from 4:30 – 5:30 PM in
the Chisholm Room at the Hyatt Regency Hotel. Discuss ways SAMPE’s
Technical Communities can work better for you.
www.sampe.org
Producer of high quality,
affordable
carbon nanofibers.
Pyrograf Products, Inc.
Cedarville, Ohio
937-766-2020 x139 • [email protected]
www.pyrografproducts.com
See us in booth 1003
15
Thursday, October 22 8:15 – 8:45 AM • Room 205
Room 205
Featured Lecture - Acoustic Emission (AE)
Offers New Horizons for Composites
Nano and Conductivity/EMI
Session Chair: Nate Hansen, Conductive Composites Company
Lecturer: Adrian Pollock - Principal Scientist,
Mistras Group
9:00 AM
Acoustic emission (AE) is an excellent tool for
detecting damage in composites at the moment it is occurring. AE
testing can also be used to recognize the presence of pre-existing
damage. It can be used to locate the sites where damage is developing
early in the fatigue life of a structure; and near the end of the structure’s
life, it can be used to give a direct warning of incipient failure. As a
nondestructive testing method, AE works even better on composites
than on metals, because composites are more generous in their
emitting properties. Applications include fatigue testing of prototypes
(to prevent premature failure), routine maintenance inspection (of
bucket trucks, for example), and materials characterization.
This presentation will discuss these capabilities, give examples to show
what can be done with AE today, review the technical elements that
must be in place for successful AE testing, and indicate directions for
future growth. The horizons of material technology can indeed be
expanded by the use of this method.
8:45 AM – 3:00 PM • Room 208
AFOSR Workshop: Multiscale Modeling for Polymer Matrix
Composites
Moderator: Charles Lee, Program Manager, AFOSR and Tia Benson-Tolle,
Air Force Research Laboratory/Materials and Manufacturing Directorate
This panel/workshop is focused on one of the many links in the
multiscale modeling of Fiber Reinforced Composites, specifically
between the molecular scale modeling and the micromechanics scale
modeling. Efforts to directly link these two scales are needed to make a
rudimentary prediction of composite structure behaviors based on the
consituent’s properties. A direct linkage between these two scales will
lead to better prediction of new resin chemistry on the performance
of the composite structures. This linkage can also lead to prediction of
cure cycle effects and chemical aging effects on the properties of the
composite structures.
Panel members are drawn from researchers who are in the
micromechanics and molecular scale modeling areas that are offering
potential possibilities for this linkage.
Panelists:
8:45 AM – Charles Lee, AFOSR
9:00 AM – Steve Christensen, Boeing
9:25 AM – Jon Gosse, Boeing
9:50 AM – Sung Ha, HanHang University and Prof. Steve Tsai, Stanford
University
10:15 AM – Tom Clancy, National Inst of Aerospace Associates
11:00 AM – Rajev Berry, Materials Laboratory
11:25 AM – Prof. Reinhold Daustadkt, Stanford University
11:50 AM – Ray Fertig , Firehole Technologies Inc.
1:45 PM – Soumya Patniak, AFRL/RX
2:10 PM – Greg Odegard, Michigan Tech University
2:35 PM – Kishore Pochiraju, Stevens Institute
16
Technical Program
ITAR
Lightweight Highly Effective Shielding Veil for Conductive
Composites, G. Hansen, N. Hansen, Conductive Composites
Company, Midway, UT
9:25 AM
ITAR
Electromagnetically Shielding Spray Paints Using
Commercial-off-the-Shelf Polymer Systems, G. Hansen, N.
Hansen, Conductive Composites Company, Midway, UT
9:50 AM
Highly Electrical Conductive Multi-walled Carbon Nanotube/BMI
Composites, Q. Cheng, J. G. Park, J. Bao, Z. Liang, C. Zhang, B. Wang,
FAMU-FSU College of Engineering, Tallahassee, FL
10:15 AM
Eliminating Tradeoffs in Conductive Composites via Novel
Heterogeneous Structures, T. Fornes, N.D. Huffman, S.B. Carruthers,
LORD Corporation, Cary, NC
11:00 AM
Electrically-conductive Skins for Morphing UAVs, E. S. Handy, GVD
Corporation, Cambridge, MA; T. Sanderson, Raytheon Missile Systems,
Tucson, AZ; R. Justice, Air Force Research Laboratory, Wright-Patterson
AFB, OH
11:25 AM
Integrated EMI Coatings for Composites Through Engineered Use of
Nanofillers, A. Morgan, T. J. Stonecash, J. L. Pierce, University of Dayton
Research Institute, Dayton, OH
11:50 AM
Preparation of Hollow Metallic Fibers for Electromagnetic Wave
Absorbing Materials, J. Woo Yi, S. Bok Lee, J. Bong Kim, S. Kwan Lee, K.
Yeon, Park, Korea Advanced Institute of Science and Technology, Daejeon,
Korea; M. Keun Yoon, South Dakota School of Mines & Technology, Rapid
City, SD
Room 204
Nano-Enhanced Resins for Aerospace Applications I
Session Chair: Ming C. Liu, Spirit AeroSystems Inc.
9:00 AM
Carbon Nanotube Enhanced Composite Materials, W. Wang,
F. Meyer, Y. Wang, G. Miller, S. Potluri, Zyvex Performance Materials,
Columbus, OH
9:25 AM
Development of Boron Cage Compound Nanocomposite Elastomers,
M. F. Hawthorne, M. W. Lee, Jr., University of Missouri–Columbia
International Institute of Nano and Molecular Medicine, University of
Missouri – Columbia, Columbia, MO; D. E. Bowen III, E. A. Eastwood,
National Nuclear Security Administration’s Kansas City Plant Honeywell
Federal Manufacturing & Technologies, Kansas City, MO
9:50 AM
Development of Epoxy and Urethane Boron Cage Compound
Nanocomposites, M. F. Hawthorne, M. W. Lee, Jr., University of
Missouri–Columbia International Institute of Nano and Molecular Medicine,
University of Missouri – Columbia, Columbia, MO; E. A. Eastwood, D. E.
Bowen III, National Nuclear Security Administration’s Kansas City Plant
Honeywell Federal Manufacturing & Technologies, Kansas City, MO
SAMPE Fall Tech Conference & Exhibits–Wichita, KS
Thursday, October 22 10:15 AM
Carbon Nanofibers Toughened AS-4/EPON862 Prepreg and its
Laminate Properties, K.-T. Hsiao, J. Ryals, University of South Alabama,
Mobile, AL; P. H. Wu, M. C. Liu, Chief Scientist Office, Spirit AeroSystems
Inc., Wichita, KS
11:00 AM
Room 206
Lightening Strike Protection
Session Chair: Yulia Kostogorova-Beller, National Institute for Aviation Research
9:00 AM
ITAR
Nano-scale Resin Modifications in Fiberglass Laminates Containing
Ply Drops, S. L. Donaldson, University of Dayton, Dayton, OH; T. J.
Stonecash, S. Sihn, University of Dayton Research Institute, Dayton, OH
11:25 AM
Dispersion of Short and Long Nanotubes Using Microfluidic Method
for Composite Applications, Y. Tian, C. Zeng, Z. Liang, C. Zhang, B.
Wang, FAMU-FSU College of Engineering, Tallahassee, FL
11:50 AM
Shape Memory Polymer Nanocomposites with Carbon Nanofiber
Paper, H. Lu, Y. Tang, E. Chew, J. Gou, University of Central Florida,
Orlando, FL; H. Lu, J. Leng, S. Du, Harbin Institute of Technology, Harbin,
China
Room 207
High Temperature Resins & Composites I
Session Chair: Kenny Johnson, Air Force Research Laboratory
9:00 AM
ITAR
9:25 AM
ITAR
ITAR
11:00 AM
ITAR
Moisture Effects on Silicon Carbide-reinforced Imide Matrix
Composites with High-temperature Finishes, R. E. Allred, J.-
ITAR
Technology, Seattle, WA
10:15 AM
Carbon Nanofiber Paper for Lightning Strike Protection of
Composite Materials via Hybrid Carbon Nanofiber Paper, F. Liang,
Y. Tang, J. Gou, University of Central Florida, Orlando, FL; D. Firsich,
Inorganic Specialists Inc., Miamisburg, OH; J. Fielding, Air Force Research
Laboratory, Wright-Patterson Air Force Base, OH
Manufacturing with Nano-modified Composites
Session Chair: Susan Robitaille, Renegade Materials Corp.
Field Emission Improvement of Carbon Nanotube Buckypaper by
Laser Post-treatment, H. Y. Miao, Department of Electrical Engineering,
Tunghai University, Taichung, Taiwan; Y. Chen, M. Zhang, R. Liang, C.
Zhang, B. Wang, Florida State University, Tallahassee, FL; S. Walsh, Army
Research Laboratory Aberdeen Proving Ground, MD
9:25 AM
The Distribution and Flow of Nickel Powder and Carbon Nanotubes
Mixed in an Aluminum Matrix via Friction Stir Welding, H. E. Misak,
C. A. Widener, D. A. Burford, R. Asmatulu, Wichita State University,
Wichita, KS
M. Gosau, J. P. Barlow, H. Wang, Adherent Technologies Inc.,
Albuquerque, NM
9:50 AM
Effect of Stacking Sequence on Oxidation Behavior of
Polymeric Matrix Composites, G. Tandon, University of Dayton
10:15 AM
Research Institute, Dayton, OH; K. V. Pochiraju, Stevens Institute of
Technology, Hoboken, NJ; R. B. Hall, Materials and Manufacturing
Directorate, Air Force Research Laboratory, WPAFB, OH
11:25 AM
Hole Protection with Expanded Grommets in Carbon Fiber
Reinforced Plastic, J. Ransom, M. Wehrmeister, D. Bakken, Fatigue
9:00 AM
Solutions Inc., Moraine, OH
10:15 AM
Kawakami, University of Washington, Seattle, WA
9:50 AM
Improving the Manufacturability and Durability of Thick
Polyimide Matrix Composites, J. Lincoln, S. Hout, D. B. Curliss,
High Temperature Structural Adhesives for Wide Area Bonding
Applications, J. Lincoln, A. Javorina, D. B. Curliss, Performance Polymer
Ravine, NanoTechLabs Inc., Kettering, OH; R. Czerw, NanoTechLabs
Inc., Yadkinville, NC; J. Schultz, National Composite Center,
Kettering, OH
Damage Response of Carbon/Epoxy Composite Plates Subjected
to Mechanical Impact and Simulated Lightning Strike, P. Feraboli, H.
Room 209B
9:50 AM
Carbon Nanomembrane for Lightning Strike Protection, J.
9:25 AM
Thermal Oxidative Barrier Coating for Polymer Matrix
Composites, T. Bullions, W. Ronk, GE Aviation, Cincinnati, OH
Performance Polymer Solutions Inc., Moraine, OH
Technical Program
Novel Core Shell Rubber Particles for High Performance Thermosets,
D. Sober, R. Nishimura, S. Walsh, Kaneka Texas Corp., Pasadena, TX
Mechanical Characterization of Unidirectional Thermoplastic
Nanocomposites, K. Narasimhan, S. Roy, The University of Alabama,
Tuscaloosa, AL
Alternate Monomer Suppliers for AFR-PE-4, J. Magato, R. A.
Gray, Maverick Corporation, Blue Ash, OH
11:50 AM
Compimide® P500: A New Bismaleimide Powder for Advanced
Composites, S. Evsyukov, B. Kramer, T. Pohlmann, H. D. Stenzenberger,
Evonik Technochemie GmbH, Dossenheim, Germany
Thursday Breaks
10:40 – 11:00 AM* and 3:25 – 3:35 PM
*Complimentary coffee in the SAMPE Registration area
sponsored by SAMPE Asia.
19-20 January 2010 • Kuala Lumpur, Malaysia
www.sampe.org
17
Thursday, October 22 Room 206
Technical Program
2:10 PM
Improving the Reliability of Electrical Grid Infrastructure: Case Study
of Pultruded Fiber Reinforced Inorganic (FRI) for Fire Protection, C.
Infusion Technology - Processing Effects
Session Chair: Dirk Heider, University of Delaware
Hiel, Composite Support & Solutions Inc., Rancho Palos Verdes, CA
11:00 AM
Pressure Behavior During Vacuum Assisted Processing (VAP), Ö.
Eksik, TUBITAK Marmara Research Center, Material Institute, Kocaeli,
Gebze, Turkey; S. Chandrabalan, Ö. Eksik, H. Deffor, P. Simacek, J. W.
Gillespie, Jr., S. Advani, D. Heider, University of Delaware, Newark, DE
11:25 AM
Spring-In Prediction for Cylindrical Composite Specimens Manufactured with VARTM, K. Jin Teoh, K.-T. Hsiao, University of South Alabama,
Mobile, AL
11:50 AM
Use of Controlled Radical Polymerization in Elevated Temperature
Vacuum Infusion of Large Parts, M. O. Wells, A. Cocquyt, Arkema Inc.,
King of Prussia, PA
Room 209B
2:35 PM
Research and Development Towards New Generations of Full
Composite Tanks Dedicated to 70MPa Gaseous Hydrogen Storage,
C. Thomas, F. Nony, S. Villalonga, P. Mazabraud, French Atomic Energy
Commission, Monts, France; M.-C. Lafarie, M. Bertin, D. Bertheau, ENSMA
– LMPM-UMR CNRS, Chasseneuil, France
3:35 PM
Carbon Fiber Sandwich Construction Beam Using Continuous Resin
Transfer Molding, B. Hochman, Glasforms Inc., San Jose, CA
4:00 PM
How Aerospace Technology is Improving the Electrical Transmission
Grid, E. Bosze, CTC Cable Corporation, Irvine, CA
Room 204
Filament Winding and Pultrusion I
Session Chairs: John Green, GSG Inc.; Anand Rau, Toray; and Clem Hiel,
Composites Support and Solutions
11:00 AM – 3rd Place Winner
Improvements in FEA of Composite Overwrapped Pressure
Vessels, R. Willardson, eServ, a Perot Systems Company, Plano,
TX; D. Gray, Dassault Systemes Simulia Corp., Lewisville, TX; T.
Delay, NASA, MSFC, Huntsville, AL
11:25 AM
Mechanical Property Characterization and Finite Element Analysis
of Pultruded I-beam, M. Saha, J. Anderson, University of Oklahoma,
Norman, OK
11:50 AM
Polyurethane Resins for Pultrusion, R. A. Cageao, J. Hayes, C. Snyder,
Bayer Material Science LLC, Pittsburgh, PA
Nano-Enhanced Resins for Aerospace Applications II
Session Chair: Ming C. Liu, Spirit AeroSystems Inc. and Kuang-Ting Hsiano,
University of South Alabama
2:10 PM
Nano-Enhanced, High Temperature, Abrasion Resistant Coatings,
R. A. Gray, J. R. Magato, S. Gronauer, Maverick Corp., Blue Ash, OH
2:35 PM
Corrosion Protection of Unclad 2024-T3 Aluminum Surface with
both Chromium Conversion and MWCNT Nanocomposite Coatings,
R. Asmatulu, C. Hille, H. Misak, Wichita State University, Wichita, KS
1:45 PM
Enhancement of Mechanical and Electrical Properties of FiberReinforced Polymer Composites Through Addition of CNF by
Electrophoretic Deposition, A. Rodriguez, M. Guzman, C. Lim, B.
Minaie, Wichita State University, Wichita, KS
3:00 PM
12:15 – 1:45 PM • Room 210B
Nano InTM Resin Film, An Innovative Solution for Nanocomposites,
SAMPE Awards Luncheon
Tickets are included with full registration. Additional tickets are $35
and can be purchased at the Additional Purchases counter in the
SAMPE Registration Area.
Luncheon Presentation: The Many Airplane Factories of the Air
Capitol
Speaker: Walter House, Kansas Aviation Museum, Volunteer Curator Mr. House will present on the history of aviation factories in Wichita
Kansas since 1924. His presentation includes photos and depictions
of factory buildings in Wichita from 1920 to present, and includes
buildings that are still in use today.
Room 209B
P. Lucas, Nanoledge Inc., Boucherville, Québec, Canada; J. Le Corvec, V+I
Composites, Ottawa, Canada
Room 207
High Temperature Resins & Composites II
Session Chair: Kenny Johnson, Air Force Research Laboratory
1:45 PM
Carbon Dioxide Filtration Through Sustainable Carbon Carbon
Composite Filters, A. Sfakianakis, V. Drakonakis, J. C. Seferis,
Polymeric Composites Laboratory - GloCal/FREEDOM, Seattle, WA; G.
C. Papanicolaou, Dept. of Mechanical Engineering and Aeronautics, Rio,
Patras, Greece; C. C. Doumanidis, University of Cyprus, Nicosia, Cyprus
2:10 PM
Fabrication and Characterization of High Temperature Resin/
Carbon Fiber/Carbon Nanotube Multi-scale Composites, X. Fu, C.
Zhang, T. Liu, Z. Liang, B. Wang, Florida State University, Tallahassee, FL
Filament Winding and Pultrusion II
Session Chairs: John Green, GSG Inc.; Anand Rau, Toray; and Clem Hiel,
Composites Support and Solutions
1:45 PM
The Cryogenic Bonding Evaluation of a Thin-walled Aluminum Lined
Composite Overwrapped Pressure Vessel, E. Clark, T. H. Fronk, M. D.
2:35 PM
Advances in Material Testing Methods for High Temperature
Composites, K. Mercer, K. A. Kenzel, San Diego Composites Inc., San
Diego, CA
Lambert, Utah State University, Smithfield, UT
18
SAMPE Fall Tech Conference & Exhibits–Wichita, KS
Thursday, October 22 Technical Program
Room 206
Room 204
POSS Resin Systems
Automation & Optimization of Autoclave Cure
1:45 PM
3:35 PM
Session Chair: Jeff Wiggins, University of Southern Mississippi
High Temperature Epoxies Enhanced by Nanostructured Polyhedral
Oligomeric Silsesquioxane (POSS) Molecules, B. X. Fu, C. DeArmitt, J.
Schwab, Hybrid Plastics Inc., Hattiesburg, MS
2:10 PM
High Performance Polyimide Materials Enhanced by Polyhedral
Oligomeric Silsesquioxane (POSS) Molecules, J. Lichtenhan, J.
Schwab, B. Fu, Hybrid Plastics Inc., Hattiesburg, MS
2:35 PM
Novel POSS-epoxy Based High Temperature Composite Matrix,
M. Jackson, J. S. Wiggins, Southern Miss, Hattiesburg, MS; B. Fu, Hybrid
Plastics, Hattiesburg, MS
3:00 PM
Clay-Thermoset Nanocomposites for Different Applications, T.-D. Ngo,
M.-T. Ton-That, National Research Council Canada- IMI, Boucherville, Canada
Session Chair: Tom Rose, Av Pro Inc.
Modification of Time-Temperature-Transformation Diagram to Obtain
a Comprehensive Cure Map for Polymer Composites, S.M. Sabzevari,
S. Alavi-Soltani, H. Koushyar, and B. Minaie, Wichita State University,
Wichita, KS
4:00 PM
Correlation Between Viscoelastic and Mechanical Properties for an
Out-of-Autoclave Polymer Composite, C. Gernaat, S. Alavi-Soltani, M.
Guzman, A. Rodriguez, B. Minaie, Wichita State University, Wichita, KS;
J. Welch, Spirit AeroSystems, Wichita, KS
Room 207
Nondestructive Evaluation & Inspection
Session Chair: Nick Gianaris, General Dynamics Land Systems
3:35 PM
ITAR
3:35 PM Room 206
POSS Round-table Discussion
4:00 PM – 3rd Place Winner
Fiber Optic Monitoring of Structural Composites Using
Optical Backscatter Reflectometry, D. Peairs, L. Sterner, K.
Session Chair: Jeff Wiggins, University of Southern Mississippi
Polyhedral oligomeric silsesquioxanes (POSS) are used to impart unique
properties to thermoplastics, thermosets, elastomers and coatings.
POSS technology possesses broad utility for consumer products,
aerospace, biological, pharmaceutical, agricultural, transportation,
and construction industries. In order to be successful in realizing full
potential, one must understand that POSS behaves differently than
conventional additives. We will discuss POSS in an open forum during
this round-table session to review what POSS can deliver in terms of
performance, and to give some insights on how to formulate POSS to
realize the benefits of this exciting nano-technology.
Participants:
• Dr. Joseph Lichtenhan, President, Hybrid Plastics
• Dr. Joseph Schwab, Chief Technology Officer, Hybrid Plastics
• Dr. Bruce Fu, Thermoset Materials Manager, Hybrid Plastics
• Dr. Jeff Wiggins, Assistant Professor, University of Southern Mississippi
Large Radome NDI, S. Hall, Raytheon, McKinney, TX
Flanigan, V. Kochergin, Luna Innovations, Blacksburg, VA
4:25 PM
Ultrasonic Phased Array Tools for Composite Inspection During
Maintenance and Manufacturing, A. Lamarre, J. Habermehl, Olympus
NDT, Quebec City, Canada
Thursday Breaks
10:40 – 11:00 AM* and 3:25 – 3:35 PM
*Complimentary coffee in the SAMPE Registration area
sponsored by SAMPE Asia.
19-20 January 2010 • Kuala Lumpur, Malaysia
Congratulations to the Winning Authors of the Outstanding Papers!
1st Place Outstanding Paper
900°F Glass Transition Temperature Material for Structural Composites and High Temperature Composite Tooling Applications
J. E. Lincoln, Z. McHale, R. J. Jurek, S. L. Hout, D. B. Curliss, Performance Polymer Solutions Inc., Moraine, OH
2nd Place Outstanding Paper
Advanced Composite Cargo Aircraft
J. D. Russell, Air Force Research Laboratory, Wright-Patterson Air Force Base, OH; B. Shenk, R. Holzwarth, Air Force Research Laboratory, Wright-Patterson Air Force, Base, OH; M. Swanson, D. Paige, M. Tresnak, S. Ames, Lockheed Martin Aeronautics Company,
Palmdale, CA; P. Neumeier, Lockheed Martin Aeronautics Company, Marietta, GA
3rd Place Outstanding Paper - Tie
Improvements in FEA of Composite Overwrapped Pressure Vessels
R. Willardson, eServ, a Perot Systems Company, Plano, TX; D. Gray, Dassault Systemes Simulia Corp., Lewisville, TX; T. Delay, NASA,
MSFC, Huntsville, AL
Fiber Optic Monitoring of Structural Composites using Optical Backscatter Reflectometry
D. Peairs, L. Sterner, K. Flanigan, V. Kochergin, Luna Innovations, Blacksburg, VA
www.sampe.org
19
Show Floor and Exhibitor Alpha Listing
Coffee Service
Entrance
Fall Tech Conference Exhibitors current as of 9-29-09
3M Aerospace 901
A2 Technologies 808
A&P Technology 917
AAR Composites 915
Abaris Training 603
Acrosoma 919
Advanced Ceramics Manufacturing TT202
AFRL/RX 913
Airtech International 409
American Autoclave Co. TT101
A.P.C.M. Manufacturing 106
Applied Aerospace Structures Corporation TT317
Applied Sciences, Inc. 1003
ASC Process Systems 609
Assembly Guidance 209
Associated Industries, Inc. 912
AvPro, Inc & Alpha Technologies/
Dynisco 1006
Benecor, Inc. 704
Bondtech Corp. 510
Burnham Composite Structures611
Carl Zeiss MicroImaging, Inc.
102
Canyon Composites TT200
Carolina Narrow Fabric 702
CGTech TT412
CMS North America TT109
Composiflex, Inc. TT107
Composites One TT113
Cytec Engineered Materials 504
De-Comp Composites, Inc. 904
Delsen Testing Laboratories, Inc. TT414
Dexmet TT218
DIAB Sales, Inc. 909
Diversified Machine Systems, Inc. 710
www.sampe.org
Dunstone Company TT311
Dutch Thermoplastic Components BV TT408
Elantas PDG, Inc. 703
eServ 922
Evonik Degussa Corporation 300
Evonik Foams, Inc. - Rohacell 302
Exova OCM, formerly OCM Testlabs 701
Extec Corp. 926
Fiber-Line, Inc. TT303
FlackTek, Inc. 1008
General Plastics Mfg. Co. 211
General Test & Automation Grp TT305
Graco Supply & Integrated Services TT406
Greater Wichita EDC
108
GSG, Inc. TT119
HEATCON Composite Systems801
Helicomb International 705
Henkel Corporation 910
Hexcel Corporation 711
HITCO Carbon Composites, Inc. 405
ICES Corporation
924
Ingersoll Machine Tools, Inc. TT402
Integran Technologies, Inc.
TT111
International Business Wales
1002
iSi Environmental Services800
ITT 407
L.C.O.A. Composites 805
J.D. Lincoln, Inc./UMECO Composites 914
Lucas Industries 920
Magnolia Plastics, Inc. 203
Matrix Composites, Inc. 906
Maverick Corporation 902
McCausey Lumber Co. 708
McGill Air Pressure LLC TT212
Milliken & Company 803
MTS Systems Corporation 306
NanoSperse LLC 1007
National Institute for Aviation Research
- Wichita State University
304
NEi Software, Inc. 811
Newport Adhesives & Composites 903
NuSil Technology TT416
Paragon D&E TT214
Park Electrochemical Corp.
508
Performance Polymer Solutions, Inc. 502
Pharr Yarns, LLC TT404
Pinette Emidecau TT216
Plastics Design & Manufacturing TT103
Precision Aero Services 506
Pyromeral Systems, Inc. 908
Purdue Institute for Defense Innovation 607
Quantum Composites TT301
Quatro Composites TT105
Quartus Engineering, Inc. TT204
Renegade Materials Corporation 201
Reno Machine Company, Inc. 601
Royal Plastic TT210
Sigmatex 500
SL Laser Systems 916
Solid Concepts, Inc. 1001
SouthWest Nano Technologies, Inc. (SWeNT) 706
Specialty Materials, Inc. 403
STADCO TT115
Starlite Industries 310
Stepan Company 700
Stiles Machinery, Inc. TT410
Structural Diagnostics, Inc.
Talon Test Laboratories 921
TE Wire & Cable TT208
Technical Fibre Products 907
Teijin Aramid TT313
Tencate Advanced Composites USA, Inc. 207
Textile Products, Inc. TT400
Thermwood Corporation 810
The University of Southern Mississippi 605
Ticona Engineering Polymers 308
Tiodize Co., Inc. 709
Toho Tenax America, Inc. 807
Triumph Aerospace Systems-Wichita 1004 & 1005
Universal Laser Systems, Inc.
1009
Upland Fab, Inc. 911
Vistagy 401
Wacker Silicones 809
Waters Corporation TT307
Watkins & Associates, Inc.
TT315
Web Industries TT309
Weber Manufacturing Technologies Inc. 707
Wichita State University College of Engineering 802
Wolff Industries, Inc. TT117
Zyvax, Inc. 918
Zyvex Performance Materials, Inc. TT206
21
Exhibitor Products
3M Aerospace
901
3M Center, Bldg 223-1N-14, St. Paul, MN 55144-1000
www.3M.com/Aerospace
3M is a leading supplier to the global aerospace industry, providing
innovative products & solutions to aviation industry. 3M products
include adhesives & tapes; abrasives; electronic materials & equipment;
primers & coatings; protective, decorative & reflective films to make
aerospace operations more effective, profitable, safe & efficient.
A2 Technologies
808
14 Commerce Drive, Danbury, CT 06810
www.A2technologies.com
A2 Technologies is focused on out-of-laboratory FTIR measurements
A2’s primary goal is on bringing FTIR to more and more diverse
applications and end users. The portable FTIR systems are designed
to enable experienced FTIR users to develop dedicated methods, and
then for those methods to be deployed with A2’s innovative FTIR
analyzers in out-of-lab environments.
A & P Technology
4595 E. Tech Drive, Cincinnati, OH 45245
www.braider.com
917
A&P Technology is the world’s largest producer of braided
reinforcements for the composite industry. A&P provides custom
solutions at low costs by taking advantage of the benefits of braided
architecture. Braid provides composites with increased damage
tolerance, improved energy absorption and lighter weight, along with
ease of design and easy lay-up. Check out A&P’s new quasi-isotropic
broadgood, QISO - a single layer balanced laminate.
AAR Composites
915
14201 Myerlake Circle, Clearwater, FL 33760
www.aarcorp.com/composites
AAR Composites is an advanced composite technologies design,
certification & manufacturing company. AAR is a leader in aircraft
interior structures, honeycomb panel fabrication, autoclave cured
primary structures, RTM structures, trapped rubber molding, VARTM
and compression molded composites. AAR Composites also offers
aircraft interior adhesives & fastening systems, acoustic panels,
autoclave cured mounting structures & honeycomb panel edge fill
materials. From concept to production, AAR Composites is the one
stop composites source.
Abaris Training Resources, Inc.
603
5401 Longley Lane, Suite #49, Reno, NV 89511
www.abaris.com
Dedicated to excellence in advanced composite training since 1983,
Abaris currently has 20 different
courses ranging from design to
manufacturing to repair & NDI.
We now offer wind blade repair
training as well. All of our courses include both theoretical & practical
“hands-on” lessons in the lab. Be sure to visit our website for more
information about these courses & the scheduled dates for 20092010.
22
Acrosoma
Wolfsakker 2, Lokeren 09160 Belgium
www.acrosoma.com
919
Advanced Ceramics Manufacturing
TT202
7800-A South Nogales Highway, Tucson, AZ 85756
www.acmtucson.com
Advanced Ceramics Manufacturing, a Native American AS9100
certified company, is an aerospace company, supplying water
soluble mandrels, ceramic cutting tools, & composite parts. ACM’s
FASTCORE process allows our customers to provide a CAD drawing
& receive a finished mandrel or composite prototype in 30 days or
less. Furthermore, our production capabilities allows for repetitive,
certified disposable mandrel production, mostly used for air ducts &
other complex hollow composite geometries. Contact ACM for free
sample.
AFRL/RX
2079 Tenth St. Bldg 255 Area B, WPAFB, OH 45433
913
Airtech International
409
5700 Skylab Road, Huntington Beach, CA 92647
www.airtechonline.com
Airtech Advanced Materials Group manufactures vacuum bagging
& composite tooling materials for resin infusion, hand lay-up, &
oven/autoclave cures up to 750°F. Our product line includes vacuum
bags made to any size & shape, release films, peel plies, breathers,
sealant tapes & much more. Our resin infusion tooling systems
produce autoclaves quality at room temperature cures. Technical
service worldwide. Kitting of our products is also available for labor
saving cost reductions. Four worldwide locations, Huntington Beach,
California; Differdange, Luxembourg; Rochdale, England & Tianjin,
China.
American Autoclave Co.
TT101
93 Pioneer Industrial Blvd., Jasper, GA 30143
www.americanautoclave.com
American Autoclave Company manufactures and remanufactures
new/used autoclaves to customer process requirements including R&D
to larger production autoclaves, 12 inches to 20 feet in diameter.
Additionally, we provide inspection, relocation and renovation of
existing systems. We also provide on-site service, replacement parts,
repair, preventative maintenance, and upgrades to existing autoclave
systems, including control system updates. American Autoclave has
an East Coast factory and service center in Atlanta, Georgia.
A.P.C.M. Manufacturing LLC
106
1366 Norwich Road, P.O. Box 264, Plainfield, CT 06374
www.prepregs.com
A.P.C.M. is a manufacturer of structural toughened thermo-set epoxy
prepregs with cure temperatures ranging from 190°F to 400°F. These
systems are available on most commercially available reinforcement
fabrics & fibers. Custom prepreging & toll coating services are
available. Lightning strike prepregs are available for composite
aircraft.
SAMPE Fall Tech Conference & Exhibits–Wichita, KS
& Services
Applied Aerospace Structures Corp.
TT317
P.O. Box 6189, 3437 S. Airport Way, Stockton, CA 95206
www.aascworld.com
53 years of heritage in complex, lightweight composite and metal
bonded structures. AASC is a small business with large facilities
including a 16’ diameter x 30’ autoclave. Certifications include
AS9100 Rev B and NADCAP (NDT, chemical processing, composites).
Experience in commercial and defense products for space, aircraft,
ship borne and ground systems.
Applied Sciences, Inc.
1003
141 W. Xenia Avenue, P.O. Box 579, Cedarville, OH 45314
[email protected]
Applied Sciences, Inc. (ASI) develops innovative carbon materials
and their applications for various commercial and military customers.
ASI’s manufacturing affiliate, Pyrograf Products, Inc. (PPI), is one of the
world’s leading producers of high-quality, affordable, multi-functional
carbon nanofibers. Products include Pyrograf-III-a vapor-grown carbon
nanofiber which can be added to composite materials to enhance the
host materials’ strength, stiffness, & electrical conductivity.
ASC Process Systems
609
14062 Balboa Blvd., Sylmar, CA 91342
www.aschome.com
ASC Process Systems is the largest supplier of autoclaves, and control
software in North America producing over 25 systems per year. ASC
offers a line of standard Econoclave’s™, as well as custom equipment
to meet or exceed your application. Over the last year ASC has
provided systems from 1’X2’ to the largest autoclave in the world
at 30’X75’. No project is too large or small. ASC’s CPC™ control
package has become the industry standard, controlling over 1,800
pieces of equipment worldwide.
www.sampe.org
Assembly Guidance Systems, Inc.
209
27 Industrial Avenue, Chelmsford, MA 01824
www.assemblyguide.com
Assembly Guidance has been providing 3D-laser projection systems
for high-accuracy assembly tasks
since 1988. LASERGUIDE projects
CAD images directly onto tooling,
eliminating templates for handlayed composites. Automatic ply
verification, verifies and documents ply presence, location, fiber
orientation. FOD detection with APV robustly detects and documents
full ply liner FOD when the fix can be made at the lowest cost. KitGuide
improves nesting efficiency by projecting ply pick-up sequence.
Associated Industries, Inc.
912
225 Wabash, Wichita, KS 67214
Small business. Aerospace & general industry. Aircraft sealants,
vacuum bagging materials, fiberglass cloth, resins, adhesives, tooling
materials.
AvPro, Inc./Alpha Technologies/Dynisco
1006
2795 Broce Drive, Suite A, Norman, OK 73072
www.avproinc.com
Providing advanced processing control for autoclaves, ovens, &
presses advanced process control systems based upon the joining
together of the Alpha Technologies ATD 2000 and the progressive
application of Material State Management (MSM) software to
standard production and repair environments. The union of these two
leaders provides solutions to your composite manufacturing process.
Alpha Technologies and AvPro supports this effort through the use of
training, engineering support and advanced control systems.
23
Benecor, Inc.
704
8250 E. Marion, Wichita, KS 67210
www.benecorinc.com
Benecor, Inc. is a manufacturer of laser welded metallic honeycomb
core in the following alloys: Titanium, stainless, Inconel. Benecor’s
honeycomb is used in aerospace applications such as: heat shields,
unmanned vehicles, acoustic inlets, exhaust plugs, manned spacecraft,
panels & ramps. Our process provides an array of cell sizes &
densities utilizing CAM technology. Customer applications that require
the following characteristics can benefit from Benecor honeycomb:
lightweight, strong, corrosion resistant, formable, higher temperature
& energy absorption.
Bondtech Corporation
510
1278 Highway 461, Somerset, KY 42503
www.bondtech.net
Bondtech specializes in the manufacturing, designing, engineering, and
selling of autoclaves and autoclave systems for aerospace composites.
Bondtech Corporation manufactures the most reliable autoclaves in
the market, providing you with many years of safe service. Bondtech
invites you to visit our manufacturing facility in Salisbury, NC.
Burnham Composite Structures, Inc.
611
6262 W. 34th Street South, Wichita, KS 67215
www.BurnhamCS.com
Burnham Composite Structures, Inc. is a composites supplier with
capabilities including design & fabrication of high performance
composite bond tools (epoxy or bismaleimide), prototype tooling,
Fiber-Lok tooling reinforcement materials & eggcrate kits. We can
support your tool string with Catia V5 design, 5-axis milling, autoclave
curing, laser & ultrasonic inspection capabilities.
Canyon Composites
TT200
1548 N. Gemini Place, Anaheim, CA 92801
www.canyoncomposites.com
Canyon Composites, a leading supplier of complex aerospace
structures and an expanding aerospace fabrication and assembly
company involved in prime spacecraft and aircraft manufacture.
Our Anaheim, CA facility is 38,500 sq. ft., divided functionally to
provide optimal environments for different processes. We fabricate
and assemble hardware on spacecraft using state of the art materials
and processes. We are a full machine shop as well. Supported by
clientele such as Raytheon, Boeing, TRW, NASA.
Carl Zeiss MicroImaging, Inc.
102
One Zeiss Drive, Thornwood, NY 10594
www.zeiss.com/materials
Carl Zeiss offers a full line of upright, inverted, stereo and confocal
microscopes, image analysis systems and digital cameras for all
materials applications including research, metallurgy, surface
topography, particle analysis, metrology, quality assurance, and
failure analysis. Carl Zeiss specializes in high-resolution digital
imaging systems for demanding applications.
Carolina Narrow Fabric
702
1100 Patterson Avenue, Winston-Salem, NC 27101
www.carolinanarrowfabric.com
Fabrics, Tapes, and Coatings for Today’s World and Tomorrow’s
Solutions. Since 1929, Carolina Narrow Fabric has been manufacturing
custom designed specialty textiles for a variety of applications. CNF
currently supplies tapes & fabrics to a broad range of industries &
markets including electrical, medical, automotive, aerospace, marine,
24
Exhibitor Products
industrial, military & liquid/gas transport. If you have a problem that
requires a unique solution CNF engineers will work with you to design
& manufacture products to fit your special requirements. Whether it is
reinforcing & sealing a natural gas pipeline or providing orthopedic
casts to the medical community, CNF is up to the challenge. Let our
designers & engineers be a part of your next solution.
CGTech
TT412
9000 Research Drive, Irvine, CA 92618
www.cgtech.com
CGTech specializes in numerical control (NC/CNC) simulation,
verification, optimization, & analysis software technology for
manufacturing. Since 1988 CGTech’s product, VERICUT® software,
has been the industry standard for simulating CNC machining. VERICUT
enables NC programmers to reduce prove-outs, virtually eliminate
errors, & optimize NC programs for more efficient machining. CGTech
also offers machine-independent off-line programming & simulation
software for automated fiber-placement CNC machines. CGTech
software is used by companies of all sizes in over 55 countries.
CMS North America, Inc.
TT109
4095 Karona Court, Caledonia, MI 49316
www.cmsna.com
CMS, manufacturer since 1969 of CNC machining centers/routers
(3,4,5,6 axis) available for working plastics/
composites, light alloys, wood, glass, natural &
engineered stone, and solid surface material.
Custom CNC solutions for production needs.
Offers full service of sales, personalized training,
user-friendly software, 24/7 tech support and
extensive parts inventory.
Composiflex, Inc.
TT107
8100 Hawthorne Drive, Erie, PA 16509
www.composiflex.com
For nearly a quarter century, Composiflex has been an innovator
in design and manufacture of advanced composite components for
high performance structural and ballistic applications. We employ the
latest material and process technologies to produce products including
fairings, nacelles, electronic enclosures and racks, UAV components,
interior seating, springs, struts, and armor. Certified to ISO9001:2000
and AS9100, Composiflex is characterized by “art-to-part” projects
supported by its knowledgeable engineering staff, broad materials
expertise, and cost-effective prototyping methods.
Composites One
TT113
85 W. Algonquin Road, Suite 600, Arlington Heights, IL 60005
www.compositesone.com
Composites One is the nation’s largest composites distributor.
Composites One likes to think of itself as a member of our customer’s team
– always there when assistance is needed – we have the industry’s
most complete product line, along with the technical know-how and
market experience necessary to guarantee your success. We offer
unmatched regulatory assistance, process & applications audits,
productivity solutions & online business-to-business capabilities with
b2bcomposites.com, & much more. The Power of One…Composites One.
SAMPE Fall Tech Conference & Exhibits–Wichita, KS
& Services
Cytec Engineered Materials
504
2085 E. Technology Circle, Suite 300, Tempe, AZ 85284
www.cytec.com
CEM is a global provider of technologically advanced materials that
make it possible for designers and engineers for aerospace, highperformance industrial and other extreme-demand environments to
anticipate their time, performance and quality requirements. A business
unit of Cytec Industries Inc. (NYSE: CYT), the company has eleven
manufacturing plants, four technology centers and numerous sales
offices worldwide. CEM produces high-performance, pre-impregnated
composites and adhesives, ablatives, carbon-carbon materials for
high-temp applications, high-temp silicon-based sealants, a variety of
thermoplastic materials, and PAN and Pitch-based carbon fibers.
De-Comp Composites, Inc.
904
RR 4 Box 4460, Cleveland, OK 74020
www.decomp.com
Distributor of a broad range of vacuum bagging materials and
components. One stop shop for all of your needs.
Delsen Testing Laboratories, Inc.
TT414
1024 Grand Central Avenue, Glendale, CA 91201
www.delsen.com
An independent testing laboratory with services including mechanical,
electrical, & flammability properties testing, polymer analyses,
metallography, & environmental exposures. Specialties include testing
advanced composites, fatigue, fracture toughness, impact, OSU heat
release rate, smoke density & toxicity testing & evaluation of printed
wiring products.
Dexmet Corporation
TT218
22 Barnes Industrial Road South, Wallingford, CT 06492
www.dexmet.com
Dexmet manufactures expanded metals and plastics with configurations
ranging from one to 10,000 openings per square inch for Lightning
Strike and shielding protection for aircraft and composite applications.
Our specialty is making the highest quality fine mesh material in widths
from 0.099 inches to 60 inches in thickness’s from 0.001 inch. Let our
experienced engineering team and ISO certified facilities design a
configuration to meet your specifications and deliver it on time.
DIAB Sales, Inc.
909
1621 Falcon Drive, DeSoto, TX 75115
www.diabgroup.com
DIAB is a global supplier of core materials and composite solutions,
serving a wide range of markets including marine, wind energy,
transportation, aerospace and industry. DIAB’s Divinycell and Renicell
polymer foam cores, end-grain Pro-Balsa, and Divilette core bedding
adhesives are designed for demanding applications. Services include
analysis, testing, and training.
DMS - Diversified Machine Systems, Inc.
710
2310 Executive Circle, Colorado Springs, CO 80906
www.dmscncrouters.com
DMS is a builder of precision 3 & 5 axis CNC routers, as well as
custom engineered machine tool solutions. With more than 30 years
of innovation and industry experience as an original equipment
manufacturer, DMS serves virtually every industry segment from
aerospace and automotive to entertainment and green energy. DMS
CNC routers are routinely used on materials such as composites,
aluminum, steel, plastics, woods and foams. When quality and
precision matter...DMS delivers!
www.sampe.org
Dunstone Company, Inc.
TT311
2104 Crown View Drive, Charlotte, NC 28227
www.shrinktape.com
Dunstone announces a new product for the aerospace industry, LST
Sleeving. LST Sleeving is a heat-shrinkable sleeve that has various
applications in the manufacture of ducts, spars, stringers, and other
composite aerospace structures. Available in ETFE or PET forms,
LST Sleeving offers the user quick application of a shrinkable, hightemperature release film over the mandrel, or a shrinkable outer sleeve
for ply compaction. Dutch Thermoplastic Components
TT408
Bolderweg 1, Almere 1332 AT Netherlands
www.composites.nl
Custom molding of continuous fibre reinforced thermoplastics. Specialist
in carbon and glass PPS/PEEK/PEKK/PEI. Molded components for
aircraft structure & interior. Hot press forming. 5-axis CNC 4’x12’, Cscan inspection. Wing ribs, shear webs, clips & cleats, components for
seating. Carbon-PEEK plates up to 2” thickness. Qualified for Boeing
& Airbus structure.
ELANTAS PDG, Inc.
703
5200 N. 2nd Street, St. Louis, MO 63147
www.elantas.com/pdg
A premier global manufacturer of a wide range of liquid electrical
insulation products including potting compounds, conformal coatings,
adhesives, specialty epoxy
products used in hi-temp
applications & insulating
resins
offering
heat,
chemical, shock, & moisture resistance as well as good thermal
conductivity & dielectric protection. The Epoxylite®, ELAN-Tron®,
ELAN-Cast®, Pedigree®, and Sterling® brands are used for coating, sealing
& potting electronic components, sensors, PCBs & other applications.
Registered ISO 9001:2000 & ISO/TS 16949:2002-SecondEd.
eServ, a Perot Systems Company
922
8200 N. Allen Road, Peoria, IL 61615
www.eserv.biz
eServ, a Perot Systems Company provides engineering services that
help our clients meet challenges throughout the entire product lifecycle.
Our global delivery team (including the Wichita, KS office) allows
us to develop teams that can tackle any program regardless of size
or complexity. eServ’s ValueSourcing engineering business model
combines variable resources, lean product development methodologies,
and advanced collaboration technologies to customize solutions for
customers (ranging from the largest OEM’s to the smallest Tier Level
Suppliers) that maximize ROI while improving time to market.
Evonik Degussa Corporation
300
379 Interpace Parkway, Parsippany, NJ 07054
www.degussa-nafta.com/north_america/en
Evonik Degussa Corporation is the US subsidiary of Evonik Industries,
the creative industrial
group from Germany.
Evonik offers a wide
range of high quality
specialty chemicals and custom manufacturing services essential to
bismaleimide, epoxy, phenolic, polyimide, unsaturated polyester and
vinyl ester binder resins for composite applications.
25
Evonik Foams, Inc. – ROHACELL®
302
1560 Highway 371 South, Magnolia, AR 71753
www.Evonik.com
Evonik, Röhm GmbH, Evonik Foams, Inc. maintains the world leadership
position as manufacturer/
seller of the widest range
of
structural
sandwich panel foam core,
marketed under the trade name ROHACELL®. Ten different grades
in various densities are available to suit commonly used composite
manufacturing processes, i.e. VARTM, VARI, SLI, RFI, RTM and hand
lay-up/autoclaving. Our ROHACELL® foam cores meet the demanding
sandwich structural requirements in markets such as: aerospace,
medical, automotive, wind energy, mass transportation, marine &
others. ROHACELL® foam core applications range from wind turbine
blades to large satellite launch vehicle fairing/components.
Exova OCM
701
3883 E. Eagle Drive, Anaheim, CA 92807
www.exova.com
Exova includes 130 labs in 25 countries. OCM has over 33 years
of expertise testing non-metallic materials specializing in composites.
Including physical, chemical, thermal, mechanical, fatigue, electrical,
NDT, environmental and analysis. We are ISO 17025 accredited
and soon to be NADCAP approved. Exova has the ability to provide
an extremely wide variety of testing for an equally large variety of
industries with one phone call.
Extec Corp.
926
99 Phoenix Avenue, Enfield, CT 06082
www.extec.com
Extec/Benetec, is pleased to present the Labcut 5000 Series Precision
Cutting Composite Plate Saw. The Labcut 5000 has been designed
to meet the needs of the modern
composite test laboratory for
producing high quality, accurate
& reproducible test coupons
from production sheets. For the structural investigation of composite
materials Extec offers a full range of cutting, grinding, mounting &
polishing supplies & equipment, optical equipment, & integrated
image analysis solutions.
Fiber-Line, Inc.
TT303
3050 Campus Drive, Hatfield, PA 19440
www.fiber-lineinc.com
Apply specialty coatings & impregnation of high performance fibers.
Coatings include; colors, PTFE/abrasion resistant, adhesion promotion,
anti-microbial, UV resistance, water absorption, water repellent,
rubber, flame/smoke properties, glow in the dark & thermoplastics.
Fiber technology in fiberglass, Kevlar, Twaron, carbon, Spectra,
Dyneema, Nomex, PBO, Vectran, Technora, polyester & nylon.
Develop new products by combining fiber & coating technologies.
Have high volume twisting & winding capabilities. Manufacture small
diameter pultruded rod & fiber-optic micro cable.
FlackTek, Inc.
1008
1708 Hwy II Bld Bldg G, Landrum, SC 29356
www.spectrumxer.com
Discover the unique possibility of Non-Invasive Mixing™! FlackTek
Inc. will be demonstrating the lab size SpeedMixer™ which has the
capacity to mix samples from 3-700 grams, offers quick & uniform
26
Exhibitor Products
mixing and absolutely no clean-up! Able to disperse, as well as
mix, powders, putties, pastes, low viscosity materials, without air
entrapment, & all done in a matter of seconds. Stop by our booth &
ask how to make your mixing operations more efficient and precise.
General Plastics Manufacturing Company
211
4910 Burlington Way, Tacoma, WA 98499
www.generalplastics.com
AS9100/ISO9000 certified manufacturer of LAST-A-FOAM® rigid
& flexible high-density polyurethane foam & tooling materials. We
provide advanced materials for use in
composite core, nuclear transport vessels,
composite tooling, thermoforming, marine FRP
structure, & industrial styling industries.
We are specialists in fulfilling highperformance, high-quality requirements.
We have very broad manufacturing capability (CNC machining, resininfusion, bonding, painting, fabrication, assembly), & are qualified to most
major airframe & defense quality systems & material specifications.
Graco Supply and Integrated Services
TT406
2056 S. Edwards, Suite C, Wichita, KS 67213
www.gracosupply.com
Since 1959, Graco Supply & Integrated Services has provided
quality adhesives, sealants, paints, coatings, primers, lubricants,
tapes, cleaners & MRO products to the aerospace, aircraft &
industrial markets. In addition to product supply, we also offer custom
packaging & supply chain solutions giving our valued customers
unequaled choices regarding how materials are received, & how their
product inventory is managed. Setting Graco apart is the high level
of technical support provided throughout the product & supply chain
process. Graco is ISO9001 & AS9120 registered.
Green Sales Guy - GSG, Inc.
TT119
8443 Strato Drive, Sandy, UT 84093
www.theGREENsalesguy.com
The Green Sales Guy - GSG, Inc. is a manufacturers representative
selling & supporting filament winding machines, pultrusion machines
& other composite process equipment. GSG represents EHA/BSD,
Brenner International, Eastman Machine Company, Lynco Grinding,
Material S.A. & MJC Engineering. GSG assists customers with a single
piece of composite process equipment or can assist with plany layout,
testing, certification & complete turnkey facilities.
HEATCON Composite Systems
801
600 Andover Park E, Seattle, WA 98188
www.heatcon.com
HEATCON® Composite Systems is the leading international
manufacturer and supplier of aerospace composite repair training,
equipment, accessories, and materials. Our HCS9200B is the world’s
premier hot bonder and our new HCS3100 series repairclave may be
an alternative to expensive autoclaves. We also supply heat blankets,
tools, prepregs, resins, honeycomb, and bagging materials, in large
and small quantities for immediate delivery. Stop by our booth to find
out why HEATCON® should be your composite industry partner.
Helicomb International
705
1402 South 69th East Avenue, Tulsa, OK 74112
www.helicomb.com
Helicomb International, a Division of Synchronous Aerospace Group,
is engaged in the manufacture and repair of metal and composite
bonded structures serving the commercial and military fixed wing and
SAMPE Fall Tech Conference & Exhibits–Wichita, KS
& Services
helicopter markets. We hold multiple OEM approvals for bonding
and chemical processing and are NADCAP certified. To support our
manufacturing and repair, our 80,000 sq ft. facility utilizes two 6x20’
autoclaves, a full cleanline and two Faro CMM machines. We are
Catia V4,V5 and DPD approved for Boeing and Spirit AeroSystems.
polymer and composite parts. Examples include adding erosion
and impact protection to composites and functionally strengthening
polymer parts. In addition, Integran also produces a low frequency
magnetic shield coating - Nanovate EM - which can be used to replace
awkward shielding foils.
Henkel Corporation
910
2850 Willow Pass Road, Bay Point, CA 94565
www.henkelna.com/aerospace
Henkel’s aerospace group provides structural adhesives and metal
surface treatments that serve the aircraft OEM and MRO industries.
Henkel’s structural film and paste adhesives are used for composite,
metal and honeycomb assembly applications in all sectors of aerospace.
Key brands include Hysol® for structural adhesives, Turco® for metal
surface treatments, Frekote® mold release chemicals and Alodine®
conversion coatings.
International Business Wales
1002
405 Lexington Avenue, 21st Floor, New York, NY 10174
[email protected]
International Business Wales is one of Europe’s foremost economic
development agencies. As the inward investment and trade promotion
arm of the Welsh Assembly Government it assists companies with their
international location decisions as well as expanding the overseas
trade of businesses already located in Wales, UK. IBW’s experienced
team provides relocation and recruitment support, information on the
competitive Government financial incentives available and industry
specific knowledge across a range of sectors including aerospace,
defence, advanced engineering, life sciences, energy & clean tech.,
financial services and more.
Hexcel Corporation
711
www.Hexcel.com
Hexcel is a leading advanced composites company. It develops,
manufactures & markets lightweight performance structural materials,
including carbon fibers, reinforcements,
prepregs, honeycomb, adhesives &
composite structures, used in commercials
aerospace, space & defense & industrial
applications such as wind turbine blades. Latest Hexcel innovations
include HexTOOL machinable composite tooling compound & AcoustiCap noise minimizing honeycomb for aero-engines.
HITCO Carbon Composites, Inc.
1600 W. 135th Street, Gardena, CA 90249-2506
www.hitco.com
405
HITCO Carbon Composites, Inc. manufactures advanced composite
materials for aerospace and industrial applications. Its products
range from solid rocket motor nozzle assemblies, large aircraft
structures & assemblies, naval composite structures, wet & dry friction
applications such as aircraft and automotive torque control assemblies
and transmissions, along with materials for industrial insulation for
the aluminum & steel industries. HITCO recently reached new heights
in its ability to manufacture composite structures with the addition
of both automated fiber placement and automated tape-laying
capabilities. HITCO also manufactures & markets REFRASIL™ silica
materials for thermal protection. Founded in 1922, HITCO continues
to be an innovative leader in the advancement of carbon composite
technologies.
Ingersoll Machine Tools, Inc.
TT402
707 Fulton Avenue, Rockford, IL 61103
www.Ingersoll.com
Ingersoll Machine Tools, Inc. is a manufacturer of CNC gantry type
machining centers, horizontal profilers, horizontal boring and milling
machines and advanced fiber placement machines.
Integran Technologies, Inc.
TT111
1 Meridian Road, Toronto, ONT M9W 4Z6 Canada
www.integran.com
Integran Technologies specializes in high performance, lightweight,
nanocrystalline Nanovate metal coatings which protect and strengthen
www.sampe.org
iSi Environmental Services
800
215 S. Laura, Wichita, KS 67211
www.iSienvironmental.com
iSi Environmental Services (iSi) is a full-service environmental and
safety consulting firm which assists businesses with OSHA and
EPA compliance. This includes helping businesses comply with the
regulations as well as environmental site investigations, workplace
safety and health, industrial cleaning, asbestos abatement, hazardous
waste management, and training. iSi plans on building and operating
a facility that will collect scrap composites, remove the carbon fiber
and return the fiber to market through iSi Recycling Services, LLC.
ITT - ES/IS - Integrated Structures
407
1500 New Horizons Blvd., North Amityville, NY 11701
www.ITT.com
ITT Integrated Structures (IS) provides full design, analysis, prototyping
and production fabrication of advanced composite structural systems,
mechanized and static structures, utilizing state of the-art 3D design
and analysis tools. ITT-IS products include primary aerospace
structures, pressure vessels, and launch tubes. ITT’s has multiple
composite technologies including: braided structures, net-shape preforms, precision filament wound structures, prepreg stiffened and
sandwich structures, Resin Transfer Molding (RTM), Resin Film Infusion
(RFI), Vacuum assisted RTM (VaRTM), Thermoset and thermoplastic
composites, special applications and materials. ITT-IS is a total system
design & fabrication and integration supplier for development &
full rate production. ITT’s multiple technology divisions provide the
customer with comprehensive turnkey products, including major flight
vehicle composite airframe sections integrated with mechanisms,
electronics, pneumatics, hydraulics, and more. ITT-ISS is an AS 9100/
ISO 9001 company with NADCAP certifications.
L.C.O.A. Composites
805
20322 Windrow Drive, Lake Forest, CA 92630
www.lcoa.com
L.C.O.A. Composites creates and manufactures advanced composite
products for the government, homeland security, and commercial
markets. We draw on our more than 30 years of high volume
lamination expertise to ensure every product meets or exceeds the
specification requirements.
27
Exhibitor Products
J.D. Lincoln, Inc.
914
851 W. 18th Street, Costa Mesa, CA 92627
www.jdlincoln.com
The J.D. Lincoln, Inc. company is a formulator and manufacturer of
advanced composite materials, film adhesives, hot melt and solution
coated prepregs, x-plied face-sheets, two component adhesives and
potting materials, insert adhesives, lightning strike resistant prepregs,
acoustic dampening films, artificial stone coatings, ballistic prepregs
and many specialty products.
Lucas Industries
920
10 Precision Drive, North Springfield, VT 05150
www.lucasindustries.com
Lucas Industries is a ISO9001/2000 & AS9100B certified company,
specializing in the design & fabrication of composite & metal tools,
models, patterns, molds, various foams, prototype & production parts.
We work with our customers from concept to finish product. Our
engineers have unsurpassed expertise in the most advanced levels of
Catia & Surf Cam. We service the aerospace, aircraft & commercial
industries.
Magnolia Plastics, Inc.
5547 Peachtree Blvd., Chamblee, GA 30341
www.magnoliaplastics.com
203
For over 52 years, Magnolia Plastics has been providing highperformance epoxy systems worldwide to diverse markets including:
aerospace; commercial and general aviation; defense; electronics and
electrical; energy; marine; transportation; civil engineering; recreation;
communications; and general industry. Magnolia produces a variety
of innovative, bromide-free epoxies including: aerospace adhesives,
syntactics, electrically and thermally conductive epoxies, potting and
encapsulating epoxies, general purpose adhesives, and tooling resins.
Custom-formulated and custom-packaged epoxy systems are also
available. AS9100 certified.
Matrix Composites, Inc.
906
275 Barnes Blvd., Rockledge, FL 32955
www.matrixcomp.com
Matrix Composites is a full service provider to the aviation, military,
space and commercial industries with particular emphasis on critical
structures fabricated with polymeric composites. The company applies
superior design, analysis, prototyping, development, and manufacturing
capabilities to produce vital high performance composite structures
for demanding customers. Our experienced staff has helped Matrix
achieve industry-wide recognition as a pioneering provider of highquality, cost-effective composite solutions. Our proven track record of
reliable on-time performance is a reflection of our strong commitment
to customer satisfaction and continuous improvement.
Maverick Corporation
902
11379 Grooms Road, Blue Ash, OH 45242
www.maverickcorp.com
Maverick Corporation is a leader in research, development & production
of advanced polymer materials for the aerospace, medical, industrial
& related industries. Maverick’s product portfolio includes aerospace
qualified polymide resins (liquid & powder) capable of withstanding
28
environments over 700°F & a family of affordable, non-toxic resins
for RTM, autoclave & compression molding applications from 400°F
to greater than 650°F. Maverick is also an aerospace qualified source
for compression molded composite parts & shapes.
McCausey Lumber Company
708
32205 Little Mack Avenue, Mount Clemens, MI 48043
www.mccauseylumber.com
McCausey Lumber Company is a primary vendor of model & tooling
materials to the automotive, aircraft & recreational industries. We take
great pride in sharing our product knowledge, providing solutions for
customer needs, & servicing our clients with the utmost attention.
McGill AirPressure LLC
TT212
1777 Refugee Road, Columbus, OH 43207-2119
www.mcgillairpressure.com
McGill AirPressure is a leading supplier of bonding autoclave systems
to the world’s major aviation, automotive, and sporting goods
manufacturers. Autoclaves, from laboratory size to some of the world’s
largest & most sophisticated, bond composites such as polyamides,
polyimides, & graphite-epoxy combinations. We also rebuild &
upgrade existing autoclaves. Whatever size autoclave a customer
needs, we have the capabilities to design & manufacture a system that
will perform the processes reliably, quickly, & economically.
Milliken & Company
803
920 Milliken Road, M-169, Spartanburg, SC 29303
www.milliken.com
Technical and specialty products custom engineered for end uses
across the textile spectrum. Products include Tegris, a revolutionary,
100 percent polypropylene thermoplastic composite with excellent
impact resistance and stiffness as well as a lightweight composition,
and NexCore core material for sandwich applications.
MTS Systems Corporation
306
14000 Technology Drive, Eden Prairie, MN 55344
www.mts.com
Researchers & manufacturers worldwide
rely on MTS for the technology & expertise
required to address a full spectrum of
material testing needs - from simple
tension/compression to fracture toughness
to complex multi-axial fatigue. Featuring
complete families of servohydraulic & universal testing systems,
proven application software & reliable accessories, the MTS portfolio
provides all the static & dynamic material testing capabilities needed
to support advanced research, product development, manufacturing
optimization & quality assurance & control.
NanoSperse LLC
1007
2000 Composite Drive, Ketering, OH 45420
www.nanosperse.com
NanoSperse is a design & manufacturing company dedicated to
improving durability, reliability & functionality of defense, aerospace,
& industrial composites. NanoSperse’s specialization is uniform
dispersion of nanomaterials used as feedstocks for advanced
composites. Consistent, uniform dispersion of nano particles is critical
to achieve thermal, electrical, & mechanical performance in the next
generation of advanced composites. NanoSperse supplies custom
intermediate resin & polymer systems as required by our customers. SAMPE Fall Tech Conference & Exhibits–Wichita, KS
& Services
National Institute for Aviation Research - WSU
304
Wichita State University, 1845 Fairmount, Wichita, KS 67260-0093
www.niar.wichita.edu
The National Institute for Aviation Research at Wichita State University
provides research, design,
testing, certification & training
services to the aviation industry,
government agencies & nonaviation clients. NIAR is wellknown for its composites & advanced materials testing, qualification,
certification & research. Additional capabilities include aging
aircraft investigation, crash dynamics, low-speed wind tunnel testing,
mechanical testing, environmental testing, friction stir welding, virtual
reality, CAD/CAM training & NDT training.
NEi Software
811
5555 Garden Grove Blvd., Suite 300, Westminster, CA 90740
www.NEiSoftware.com
NEi Software is a world leader in Nastran Finite Element Analysis
(FEA), engineering simulation, and virtual test software for composites.
Engineers gain insight with capabilities like Progressive Ply Failure
Analysis (PPFA™) and Puck and LaRC02 Advanced Failure Criteria.
The website features case studies in aerospace, UAVs, automotive,
maritime, offshore oil, wind turbine, civil infrastructure, medical, and
sports products, with White Papers, videos, webinars, and tutorials.
Newport Adhesives and Composites, Inc.
903
1822 Reynolds Avenue, Irvine, CA 92614
www.newportad.com
As a subsidiary of Mitsubishi Rayon, Newport Adhesives & Composites,
Inc. is a member of one of the largest vertically integrated producers
of advance composite materials both in the USA & globally. Our
products include film-adhesives, uni-directional tapes, woven prepregs,
towpreg, & core-splice, all products are developed and produced
within our own facilities under strict process control (ISO 9001:2008
QMS registration). Newport Adhesives & Composites provides
exceptional products that include excellent mechanical properties, high
quality & fast delivery. Newport’s products are the materials of choice
by many knowledgeable users in industrial, recreational, aerospace,
marine, medical defense, energy, & automotive markets. Newport is
a domestic leader in carbon fiber prepregs. Newport’s strong position
is secured with dedicated supply of carbon fibers from both its sister
company Grafil, Inc. & parent company Mitsubishi Rayon. Newport’s
products are available in many other reinforcements of choice (E-glass,
S-glass, Quartz, & Aramid). Newport continues to provide industry
leadership through our dedicated product development team & our
full-service customer support center, Newport is ready to respond to
all your material needs.
NuSil Technology
TT416
1050 Cindy Lane, Carpinteria, CA 93013
www.nusil.com
NuSil Technology is a cutting edge manufacturer of silicone materials
for aerospace products requiring precise, predictable, cost-effective
materials. NuSil’s silicone materials deliver thermally and electrically
conductive adhesives, potting compounds, encapsulants, fast-curing
silicones, and the most extensive line of low outgassing silicone
materials in the industry. Our line of aerospace-applicable silicone
is highly resilient in the extreme temperatures of space. ISO 9001
and ASI9100B certified, NuSil operates state-of-the-art laboratories
www.sampe.org
and processing facilities and provides on-site, in-person application
engineering support worldwide.
Paragon D&E
TT214
5225 33rd Street SE, Grand Rapids, MI 49512
www.paragonde.com
Paragon D&E specializes in taking product from concept to production
via prototype and production molds/tools. We handle all phases
from specialized machining, rapid prototyping to steel/aluminum
production molds with expertise in large parts. Paragon produces
tooling and molds used to manufacture both rapid prototype parts,
as well as high-temperature tooling and parts. Paragon produces very
detailed, as well as extremely large composite tooling and parts.
Park Electrochemical Corp.
508
48 S. Service Road, Melville, NY 11747
www.parkelectro.com
Park Electrochemical Corp. is a global advanced materials company
which develops and manufactures Nelcote® advanced composite
materials and Nova™ composite parts principally for the aerospace
markets, and Nelco® high-technology digital and RF/microwave
printed circuit materials principally for the telecommunications and
internet infrastructure and high-end computing markets.
Performance Polymer Solutions, Inc.
502
2711 Lance Drive, Moraine, OH 45409
www.p2si.com
The mission of Performance Polymer Solutions, Inc. (P2SI) is to develop,
manufacture and support proprietary advanced materials that provide
discrete performance advantages to our customers. Composite
prepregs, resin transfer molding (RTM and VARTM) systems, fiber
molding compounds and structural adhesives that provide continuous
service temperatures in excess of 600°F and short-duration survivability
up to 1500°F are our primary commercial products. P2SI strives to
continually develop new materials specifically tailored to the meet
needs of customer groups representing sizable market opportunities.
Pharr Yarns, LLC
TT404
100 Main Street, McAdenville, NC 28101-1939
www.pharryarns.com
Pharr Yarns, LLC High Performance Group produces balanced plytwisted spun carbon yarn (from filament carbon tow) in yields from
6K to 1K and finer. These spun carbon yarns are used in market
applications ranging from sporting goods to industrial and aerospace.
Pharr Yarns also produces spun yarns from other fibers, such as OPF,
p-aramids and m-aramids for a variety of markets that require flame,
heat, cut, and chemical protection. Pharr is ISO 9001:2000 certified.
Pinette Emidecau, Inc.
TT216
60 Sycamore Street, Tiffin, OH 44883
www.pinetteemidecau.com
Pinette Emidecau, Inc., designs, and integrates the total molding
system. We design and manufacture custom compression molding
equipment, which includes hydraulic presses, heating systems (contact
heaters, convection ovens, and IR ovens) transfer and handling
systems. For the aerospace industry we produce systems to mold high
performance composite materials. For a turnkey solution our services
can also include tooling.
29
Plastics Design & Manufacturing, Inc.
TT103
6284 S. Nome Court, Centennial, CO 80111
www.plasticsdesign-mfg.com
Plastics Design & Mfg, (PDM), a Colorado company based in Denver
since 1976 is ISO 9001;2008 & UL/FDA/CE certified parts supplier
dedicated to quality. PDM employs a highly skilled workforce in
a modern 110,000 square foot facility specializing in custom
thermoforming, pressure forming, fabrication & profile extrision.
PDM offers in-house tooling expertise as well as EMI/RFI shielding,
color matching, & silk screening. In 2000 PDM received the Colorado
Business Leadership Award, & was presented with an Environmental
Stewardship Award in 2008 for efficiencies & recycling.
Precision Aero Services
506
1200 E. Highland Avenue, Nevada, MO 64772
www.precisionaero.net
Small, Veteran owned business founded in 1999, in Hot Springs,
Arkansas; Precision Aero Services is an FAA approved aircraft
maintenance facility specializing in the manufacturing, inspection,
repair, modification and overhaul for sheet metal, structural, bonded
and composite airframe assemblies on commercial, regional, corporate
and military aircrafts. In 2004 PAS moved to a 152,000 square foot
facility conveniently located in the Midwest. We added a 10 tank PAA
etch line and a 9x20 autoclave to expand our capabilities.
Purdue Univ. - Institute for Defense Innovation
607
Forney Hall of Chemical Engineering, 480 Stadium Mall Drive
West Lafayette, IN 47907-2100
https://engineering.purdue.edu/PIDI/
The primary objective of the Purdue Institute for Defense Innovation
(IDI) is the development of large & sustained programs of research &
development that support federal & state agencies charged with the
defense of American citizens. As such, the primary customers of the
IDI programs & products are the United States Department of Defense
& Homeland Security. The institute consists of multiple research centers
of excellence with expertise that meet specific DoD & DHS needs.
Pyromeral Systems, Inc.
908
3010 LBJ Freeway, Suite 1200, Dallas, TX 75234
www.pyromeral.com
Pyromeral Systems develops & manufactures composite materials
designed to resist prolonged exposure to high temperatures (up
to 2000°F). With expertise in inorganic polymers & their use in
composites manufacturing, we offer innovative glass-ceramic-matrix
composites for motorsports, aerospace or defense. Our solutions are
easy to use & quick to implement in applications requiring resistance
to heat & fire. They include: lightweight structural composites for heat
shields or exhaust ducts; insulating fire barriers; high-temperature
tooling materials.
Quantum Composites, Inc.
TT301
1310 S. Valley Center Drive, Bay City, MI 48706
www.quantumcomposites.com
QCI is a leading developer and supplier of structural and semi structural
thermoset material and parts solutions. QCI’s Engineered Structural
Composite (ESC) materials include carbon or glass reinforcement in
epoxy, phenolic, vinyl ester and polyimide resin matrices, supplied
under Lytex® AMC® QC trade names. These materials provide
exceptional properties in three dimensional compression molded
structures. QCI is a subsidiary of Premix, Inc. a leading supplier of
thermoset composite solutions based in North Kingsville, OH.
30
Exhibitor Products
Quartus Engineering Incorporated
TT204
10251 Vista Sorrento Parkway, Suite 250, San Diego, CA 92121
www.quartus.com
Quartus Engineering provided mechanical design, analysis, test, &
optimization services for the development of composite structures &
parts.
Quatro Composites™
TT105
403 14th Street SE, Orange City, IA 51041
www.quatrocomposites.com
At Quatro Composites™ we offer a full line of services including
design, analysis, laminate optimization,
quick prototyping and qualified production
of advanced composite structures. Our
OptiPart™ composite optimization process
results in significant weight savings over
equivalently loaded aluminum structures. We specialize in the design
of highly loaded brackets and fittings, as well as producing parts of
complex geometries using bladder molding, compression molding,
qualified autoclave and out-of-autoclave processes.
A division of Tec Industries, LLC
Renegade Materials Corporation
201
3363 S. Tech Blvd., Springboro, OH 45342
www.renegadematerials.com
High-temperature polymer prepregs, adhesives, films & molding
compounds. Aerospace industry leading affordability & lead-times.
Superior bismaleimide, polyimide, cyanate ester and epoxy products.
Proven performance with polyimide composite materials for service
temperatures to 1500°F. Uni-tape or fabric prepregs. High-rate and
development scale production; ISO 9001 & AS 9100 certified. Stateof-the-art manufacturing process controls & consistent product quality.
Nano-tailored resins, prepregs, films for engineered composite
solutions. Any Resin – Any Fiber – Any Filler. No set-up charges or
minimum buy.
Reno Machine Company, Inc.
601
170 Pane Road, Newington, CT 06111
www.reno-machine.com
Reduce energy costs and cure cycles while
increasing production with out-of-autoclave
tooling. Reno Machine will be displaying
and presenting Surface Generation’s Out-ofAutoclave and Reconfigurable Pin Tooling which
incorporates heating & cooling zones that can be cycled to locally
moderate & accelerate the cure. This design significantly enhances
process control and allows out-of-autoclave processing of complex
composite structures as well as providing a reconfigurable molding
surface to accommodate part revisions.
Royal Plastic MFG., Inc.
TT210
1046 E. 9th Street, Minden, NE 68959
www.rpm-composites.com
Royal Plastic designs & manufactures advanced composite structures.
We have broad-scope capability of producing composite products
for the defense, aerospace, & commercial industries. Precision design
attention to quality is part of every project from the first consultation
to delivery of the final manufactured product. Royal Plastic takes
pride in providing high quality composite products while maintaining
competitive pricing. We apply TOC principles & a lean manufacturing
philosophy to provide products at the lowest overall price.
SAMPE Fall Tech Conference & Exhibits–Wichita, KS
& Services
SDI-Talon
921
650 Via Alondra, Camarillo, CA 93012
www.sdindt.com, www.talontestlabs.com
SDI-Talon has been a leader in the NDT industry for 15 years.
Whether looking for equipment for in-house testing, or looking to
contract out your testing to true professionals, SDI-Talon will be able
to meet your needs. SDI manufactures an extensive range of stateof-the-art equipment at affordable prices. Talon Test Labs combines
exceptional equipment with highly qualified and experienced staff to
deliver quality testing at competitive prices, with fast turnaround.
Sigmatex High Technology Fabrics
500
6001 Egret Court, Benicia, CA 94510
www.sigmatex.com
Sigmatex converts carbon fiber into high performance composite
reinforcements for aerospace, space, marine, transportation, industrial
& leisure applications. Our reinforcements are manufactured using
state-of-the-art equipment & processes that provide high quality &
achieve optimal results. Strength & flex characteristics can be tailored
to different end uses to take full advantage of the carbon physical
properties. Our woven, unidirectional, 3D & multi-axial fabrics are
available in a wide range of styles, weights & weaves, utilizing PAN
& pitch carbon fibers.
SL-Laser Systems
916
8107-Q Arrowridge Blvd., Charlotte, NC 28273
www.sl-laser.com
Laser projection systems for templating exact parts location and
composite ply layup, drastically reducing setup times and increasing
placement accuracy - project directly from common IGES files. Fully
integrated software supporting many measurement templating devices
simplifies reverse engineering and prototyping.
Solid Concepts, Inc.
1001
28309 Avenue Crocker, Valencia, CA 91355
www.solidconcepts.com
Solid Concepts, Inc. is a supplier of rapid prototyping & direct digital
manufacturing services. Solid Concepts is a five-facility company
known to be a solutions provider with project management &
engineering expertise. Capabilities in PolyJet, Stereolithography (SLA),
HDSL, Selective Laser Sintering (SLS), QuantumCast™ Cast Urethanes,
CNC & FRP (Fiberglass Reinforced Panels) rapid prototypes allow for
low-volume production of plastic, urethane, & metal components.
Tooling & injection molding services will bring your project through
to completion.
Southwest NanoTechnologies, Inc.
706
2501 Technology Place, Norman, OK 73071
www.swentnano.com
Southwest NanoTechnologies (SWeNT) is a leading manufacturer of
single wall carbon nanotubes and specialty multiwall CNTs. Using
CoMoCAT®, it’s patented, scalable synthesis process, SWeNT produces
CNT with the highest degree of purity and diameter and chirality
control. SWeNT tailors CNT properties to meet specific customer
requirements, and offers its customers applications development
support through Chasm Technologies in the Boston area.
Specialty Materials, Inc.
403
1449 Middlesex Street, Lowell, MA 01851
www.specmaterials.com
Specialty Materials manufactures boron and silicon carbide fibers.
Boron fiber is used extensively in aerospace and sporting goods
www.sampe.org
applications. Boron/graphite fiber hybrid preforms are used for
selective reinforcement to enhance compression, impact and openhole compression properties. Our SiC fibers have outstanding high
temperature mechanical properties for increasing strength, stiffness
and use temperature of titanium matrix composites, and toughness
of ceramic matrix composites. SMI also produces nano-sized doped
boron powders for MgB2 superconductors.
STADCO
TT115
1931 N. Broadway, Los Angeles, CA 90031
www.stadco.com
STADCO is a leading designer and manufacturer of tooling supporting
composite part manufacturing. STADCO has an extensive history
providing reliable, exacting-tolerance tools made from Invar, steel,
and aluminum. Additionally, STADCO machines composites tooling
made from BMI, monolithic graphite, and other materials.
Starlite Industries
310
1111 E. Lancaster Avenue, Rosemont, PA 19010
www.starliteindustries.com
Starlite Industries designs diamond & solid carbide rotary cutters
specifically for composites. Diamond coated, PCD & solid carbide
cutters. Diamond, carbide drills & drill reamers for fuzz free exit holes
in carbon fiber. Drills & hole saws for ballistic materials. Threaded
drills & reamers for aerospace drill units. Countersinks, saw blades,
mounted saw blades, band saw blades & jig saw blades including
stock & specials.
STEPAN Company
700
22 W. Frontage Road, Northfield, IL 60093
www.stepan.com
Stepan Company manufactures 2-part liquid polyurethane foam
systems for composite applications. STEPANFOAM® is durable,
lightweight, and can be poured or sprayed to fit all types of shapes
and voids. STEPANFOAM Kits are packaged in ready-to-use premeasured quantities and are shipped throughout the globe to meet
your need. Inquire with Stepan Company, [email protected], for
answers to all your foam needs.
Stiles Machinery
TT410
3965 44th Street SE, Grand Rapids, MI 49512
www.stilesmachinery.com
CNC Machining Centers. 3 & 5 Axis Mills and Waterjets for advanced
materials and composites.
TE Wire & Cable
TT208
107 5th Street, Saddle Brook, NJ 07663
www.tewire.com
Stop by for a free sample of our USA made autoclave/composite
cure thermocouples. Save money and layup time using our patented
AccuClave leak resistant, pre-made, ready-to-use thermocouples and
interconnects. All made under ISO-17025 accreditation and each
product is tested and laser etched for traceability. BAC-5621K and
AMS-2750D compliant.
Technical Fibre Products, Inc.
907
259 Route 17K, 2nd Floor, Newburgh, NY 12550
www.techfibres.com
Technical Fibre Products manufactures nonwoven products from a
diverse range of fibers and binders. Our products find application
in many fields, including: fire protection, surface engineering of
reinforced plastics, thermal insulation, fuel cells and battery separators.
31
Exhibitor Products
We work closely and confidentially with our partners to long term
mutual benefit. Bring us your challenges!
for aerospace packages capable of machining large parts in a single
setup to small shops.
Teijin Aramid USA, Inc.
TT313
801-F Blacklawn Road, Conyers, GA 30012
www.teijinaramid.com
We are Teijin Aramid, a subsidiary of the Teijin Group with a passion
for aramid. Our commitment both to our products & to our customers
has made us a global leader in aramids. Wherever strength, safety,
heat or flame resistance, low weight or sustainability is required, you
will find our Twaron®, Sulfron®, Teijinconex® or Technora®. Our
products are used worldwide in many different applications & markets,
including automotive, ballistic protection, marine, civil engineering,
protective clothing, optical fiber cables, oil & gas. With our four high
performance aramids – produced at our plants in The Netherlands
& Japan – we offer the widest range of products. With unrivalled
expertise & experience we are able to continuously work on further
innovations. Often in cooperation with customers & partners through
our worldwide sales & marketing organization. That’s the power of
aramid. If you would like to learn more about the world of aramid or
to exchange ideas on developing new solutions.
Ticona Engineering Polymers
308
8040 Dixie Highway, Florence, KY 41042
www.ticona.com/composites
Thermoplastics and prepregs for composites. Fortron® Polyphenylene
Sulfide (PPS) for applications involving thermoplastic prepregs, fibers,
filaments, films and papers. PPS
is inherently flame resistant with
superior FST performance, has
excellent chemical and hydrolysis
resistance and high temperature
performance to 240°C. Applications
include wings & interiors for the aerospace industry. Celstran® long
fiber thermoplastic composites and unidirectional prepreg tapes of
glass, carbon, aramid, stainless steel. Green solution – recyclable, less
energy to manufacture, no VOCs unlike thermosets.
TenCate Advanced Composites USA, Inc.
207
18410 Butterfield Blvd., Morgan Hill, CA 95037
www.tencate.com
Manufactures thermoset & thermoplastic prepregs, resins, adhesives
& syntactics serving the
aircraft, helicopter, radome,
interiors & satellite industry.
Thermoset prepregs include epoxy, cyanate ester, BMI & high
temperature polymides. Thermoplastic prepregs include Cetex® multiply laminates, & Cetex® Thermo-Lite® PEEK & PPS thermo-plastic
unitapes. TenCate designs & manufactures compression molded parts,
& is a leading manufacturer of ballistic hard & soft composite armor.
YLA & CCS Composites are now part of TenCate.
Textile Products, Inc.
TT400
2512-2516 W. Woodland Drive, Anaheim, CA 92801
www.Textileproducts.com
Engineered woven fabrics for aerospace, commercial, recreational and
industrial applications. Bidirectional, unidirectional and multilayered
fabrics, are woven from carbon, glass, aramid and ceramic fibers.
The University of Southern Mississippi
605
118 College Drive #10076, Hattiesburg, MS 39406
www.usm.edu/polymer/
School of Polymers - The School of Polymers and High Performance
Materials at the University of Southern Mississippi offers undergraduate
and graduate programs leading to Bachelor of Science and Master
of Science degrees in polymer science as well as sports & high
performance materials, and Doctor of Philosophy degrees in polymer
science & engineering and sports & high performance materials.
Thermwood Corporation
810
904 Dale-Buffaloville Road, P.O. Box 436, Dale, IN 47523
www.thermwood.com
In the technology and capital goods area, Thermwood is the oldest
manufacturer of highly flexible, high-speed machining centers known
as CNC routers. We primarily market to the woodworking, aerospace,
plastics and composites industries but have found applications in
almost every major industry from medical to entertainment. Thermwood
builds a wide selection of systems in both 3 and 5 axis configurations,
32
Tiodize Co., Inc.
709
5858 Engineer Drive, Huntington Beach, CA 92649
www.tiodize.com
Tiodize has been manufacturing composite fasteners, screws, bolts,
nuts, rivets, hinges, latches, & self-lubricating bearings for over 20
years. We have just released our Hush Kit bearing for jet engines,
used to reduce noise levels in jet engines, & able to withstand
temperatures of 600°F. Our self-locking nut is re-usable & highly
resistant to moisture. Our composites fly on the BAE Nimrod & the
GA Predator.
Toho Tenax America, Inc.
807
121 Cardiff Valley Road, Rockwood, TN 37854
www.tohotenaxamerica.com
Toho Tenax America, Inc., is your Americas source for Tenax® brand
carbon fibers. Tenax® fibers deliver reinforcing excellence for diverse
end-use applications including aerospace, wind energy, surface
transportation, offshore oil & pressure vessels. Toho Tenax is proud
to announce the qualification of Tenax® HTS40 3k, 6k & 12k carbon
fibers to the NCAMP NMS 818 specification for general aviation
applications.
Triumph Aerospace Systems - Wichita 1004/1005
9823 E. 34th Street North, Wichita, KS 67226
www.taswichita.com
Since 1989, Triumph Aerospace Systems - Wichita, has manufactured
windshields, cockpit side windows, wingspar and leading edge sheet
metal assemblies, pilot / co-pilot control wheels, sunvisor assemblies,
and autoclave cured composite parts for the most respected aircraft
manufacturers in the industry.
Upland Fab, Inc.
911
1445 W. Brooks Street, Unit L, Ontario, CA 91762
www.uplandfab.com
Plastic & composite materials machined to exacting tolerances.
Virtually any plastic material including glass & carbon filled materials
machined. Machine prototype, small quantities and production runs.
CNC turning & milling. 5-Axis milling. CAD files accepted. CMM
inspection. AS9100 certified.
SAMPE Fall Tech Conference & Exhibits–Wichita, KS
& Services
VISTAGY, Inc.
401
200 5th Avenue, 5th Floor, Waltham, MA 02451
www.vistagy.com
VISTAGY, Inc. is a leading global provider of engineering software
& consulting services that optimize product development processes by
enhancing the functionality of commercial 3D CAD systems. For almost
20 years, VISTAGY has been a pioneer in providing industry-specific
solutions that capture complete virtual product definitions & facilitate
automatic reuse & efficient exchange of engineering information
across the enterprise & supply chain. Customers include over 200
of the world’s leading manufacturers in the aerospace, automotive,
transportation interiors & wind energy industries.
Wacker Silicones
809
3301 Sutton Road, Adrian, MI 49221
www.wacker.com
Wacker Silicones has been producing and refining its brand of HDK®
pyrogenic silica for over 40 years. Wacker Silicones continues to push
forward with its R&D to seek new potential solutions to further boost
product performance and quality. The extensive selection of both
untreated (hydrophilic) and treated (hydrophobic) HDK® grades and
HDK® dispersions offer highly versatile and comprehensive solutions
for a wide range of composites applications.
Waters Corporation
TT307
34 Maple Street, Milford, MA 01757
www.waters.com
For over 50 years, Waters has developed innovative analytical science
solutions to support customer discoveries, operations, performance,
and regulatory compliance.
Watkins & Associates, Inc.
TT315
5395 Webb Parkway, Lilburn, GA 30047
www.watkins-associates.com
Authorized distributor for Henkel Aerospace Adhesives, 3M Aerospace
Adhesives, ITW Plexus, and FREKOTE Mold Release Agents. ISO
9001:2000 & AS9120:2002 certified.
Web Industries
TT309
377 Simarano Drive, Marlboro, MA 01752
www.webindustries.com
For over 20 years, Web Industries has provided converting services to
the composites industry, pioneering the development and qualification
of prepreg slit tapes
in
spooled
form
for fiber placement
applications in military
& large commercial programs. Web operates in a new 125,000 sq.
ft. facility in Atlanta, GA, which is AS9100 registered, in class 100K
clean room manufacturing environments controlled for temperature &
humidity, where we recently added our 3rd generation production line.
Onsite freezer capacity stores raw goods & finished spools. Highly
productive, customized slitting & spooling equipment, automated
inspection systems, & a highly trained staff ensure we can meet your needs
for aerospace grade, tight-tolerance, precision-wound products.
Weber Manufacturing Technologies, Inc.
707
16566 Highway 12, Midland, ONT L4R4L1 Canada
www.webermfg.ca
Weber Manufacturing Technologies, Inc. is a modern tool and machined
component supplier, and operates a nickel vapour deposition facility
for nickel shell lay up tools. Founded in 1962, Weber builds tooling for
www.sampe.org
autoclave, compression, injection, RTM, infusion, spray and new outof-autoclave applications. Experienced in tooling materials including
NVD Nickel, Invar, steel, and aluminum. The in-house pattern shop
provides tooling and models in silicon, epoxy and REN board. Weber
has ISO9001:2000, AS9100 and CCGP registrations.
Wichita State University College of Engineering
802
1845 Fairmount Box 44, Wichita, KS 67260
www.wichita.edu/engineering
The Wichita State University College of Engineering has a solid
foundation of preparing engineers. World-class facilities, renowned
programs, seasoned faculty & real-world learning through cooperative
education & internships prepare CoE graduates for industry. Located
in Wichita, Kansas, with Boeing, Spirit AeroSystems, Bombardier
Aerospace, Hawker Beechcraft & Cessna, students have access
to industry experts. The CoE offers Masters and PhD programs in
aerospace, electrical, industrial, & mechanical, & Masters program in
engineering management as well as several graduate certificates.
Wolff Industries, Inc.
TT117
107 Interstate Park, Spartanburg, SC 29303
www.wolffind.com
Wolff Industries is the North American distributor for KAI® scissors.
The KAI® 7000 series is a high carbon, stainless steel, heavy duty
industrial scissor. It is light weight and excellent at cutting all Aramid
and hard to cut material. The 7000 series shear is used in many hard
to cut applications including military/civilian aircraft construction,
military/civilian protective clothing, automotive, marine construction,
outdoor canvas and wind protection fabric.
Zyvax, Inc.
918
P.O. Box 1666, Ellijay, GA 30540
www.zyvax.com; www.waterworks.com
Zyvax develops and manufactures proprietary lines of mold care
products for cleaning, sealing and releasing metal, composite and
gelcoated molds. Zyvax is the leading producer of high performance,
solvent free, easy to use, environmentally friendly products which are
available through worldwide distribution. Zyvax is certified under ISO
9001:2000 and AS9100:2004 Rev. BBREEZ: Zyvax announces a
new line of water based, solvent free mold coatings for all tooling used
in the wind power industry. BREEZ is based on a newly developed
polymer that has had over two years of testing within the wind
power market prior to market introduction. New application methods
include spraying, automatic robot, and conventional. STAYZ: Zyvax
is bringing a new concept to the RTM, infusion and prepreg processes
with spray interface. Spray interface is an epoxy based adhesive that
goes beyond normal spray glue characteristics by providing tack plus
a seamless bond strength to the variety of components such as metal,
glass, carbon or other synthetic laminate.
Zyvex Performance Materials
TT206
1255 Kinnear Road, Suite 100, Columbus, OH 43212
www.zyvexpro.com
At Zyvex Performance Materials we create the highest performing, nanoenhanced composite materials. We design & build special molecules
for improved mechanical & electrical properties in composites. We
create the ultimate level of performance prepregs & epoxies to achieve
superior results. If you are currently designing or building products
made from composites, we can make it stronger, lighter, & tougher.
Our vision is to provide our customers with enabling technology for
breakthrough results using our prepregs, resins, & adhesives.
33
General Information Registration Hours
Registration is located in the Upper Connecting Lobby on the
second floor between the Hyatt and the Century II Convention
Center.
Monday, October 19 7:30 AM – 5:00 PM
Tuesday, October 20 7:30 AM – 5:00 PM
Wednesday, October 21 7:30 AM – 5:00 PM
Thursday, October 22 7:30 AM – 1:30 PM
Exhibit Hall Hours
Tuesday, October 20 10:00 AM – 4:00 PM
Wednesday, October 21 10:00 AM – 4:00 PM
Badges are required for entrance into the exhibit halls. Exhibit
registration is free and can be completed at the On-site
Registration counter in the SAMPE Registration Area.
On-site Registration
Do not fill out the pre-registration form that is in the Preliminary
Program. You must fill out an on-site registration form when you
are ready to register. Payment in full must be made at the time
of registration. Acceptable forms of payment are cash, check,
VISA, MasterCard, American Express, and Discover.
D30 Meeting
•The ASTM D30 meeting requires a separate conference
registration.
•Both SAMPE conference attendees and ASTM D30 meeting
attendees may attend the joint panel “Damage Resistance of
Composite Sandwich Structures” on Tuesday, October 20.
•For more information, please contact Jennifer Rodgers at
[email protected] or +1 610.832.9694.
Cancellation/Refund/Substitution Policy
All registrations are subject to the following policies.
Cancellations: Notify SAMPE in writing or by e-mail by
September 30. No cancellations can be accepted after that
date. No cancellations will be accepted over the phone.
Refunds: Registrations cancelled prior to September 30 are
subject to a $100 service charge. Registrants who fail to attend
and have not cancelled as noted above are liable for the entire
fee.
Refunds are not given for failure to attend, late arrival,
unattended events or early departure from the meeting. Refunds
are processed approximately 60 days after the meeting.
Substitutions: Substitutions may be made at any time, by letter,
e-mail or fax. The appropriate member/nonmember rate will
apply to attending substitutions. There is no charge for making
a substitution.
34
Session Chairs, Panel Moderators, & Speakers’ Meeting, Room
210A
It is very important that all paper presenters, session chairs,
panel moderators, and panelists attend the speakers’ meeting
at 7:00 AM on the day of your session, presentation, or panel.
This will provide you with the opportunity to meet the other
session/panel participants, coordinate with you session chair
or panel discussion moderator, arrange for pre-loading of
presentations, and also hear announcements from the technical
program chairs.
Volunteer Center – Room 203
Check-in here for your volunteer assignment and instructions.
ITAR Regulations – Restricted Papers ITAR
Among other credentials needed, you must show proof of
citizenship (most overlooked item). The U.S. citizens SAMPE list
used at previous conferences will not be available.
For more information about ITAR Clearance Requirements, see
page 6.
Parking
Parking can be difficult to find at the Century II Convention
Center. To see parking and rates visit: Wichita.sampe.org.
Notes
•Attire at all events is business casual.
•All presentations are in English.
•If you have any disability and require special needs, please
note them on our registration form.
Wichita Industrial Trade Show
SAMPE Fall Technical Conference and Exhibition attendees
will be able to attend, at no charge, the Wichita Industrial
Trade Show (WITS) which is also being held in the Century II
Convention Center.
The WITS show hours are:
Tuesday, October 20
1:00 – 7:00 PM
Wednesday, October 21
10:00 AM – 7:00 PM
Thursday, October 22 10:00 AM – 4:00 PM
For Further Information Contact
SAMPE
1161 Park View Drive, Suite 200 • Covina, CA 91724-3759
Phone: +1 626.331.0616 • Fax: +1 626.332.8929
www.sampe.org
Registration:
Priscilla Heredia, ext. 610 • [email protected]
Exhibits:
Karen Chapman, ext. 616 • [email protected]
Membership:
Patricia Padelford, ext. 632 • [email protected]
SAMPE Fall Tech Conference & Exhibits–Wichita, KS
Save the Dates...
SAMPE Asia 2010
Kuala Lumpur Convention Center, Kuala Lumpur, Malaysia
19-20 January 2010
Join us for the 2nd global advanced materials & processes conference & exhibition in Asia. Offering a comprehensive technical program featuring sessions &
tutorials. To compliment the technical program an exhibition featuring tabletop
& exhibit stands will also be featured.
asia.sampe.org
SAMPE Europe 32nd International Conference and Forum
Paris, Porte de Versailles, France
12-14 April 2010
The SAMPE Europe 32nd International Conference and Forum is one of the foremost events on the Technical Conference calendar for advanced materials, processes and systems. The conference shall focus on a wide field of materials
including the strength of composites to get them applied as very innovative
materials for smart solutions in industrial segments.
www.sampe-europe.org
SAMPE Seattle 2010
Seattle State Convention Center, Seattle, Washington
Conference: 17-20 May 2010 • Exhibition: 18-20 May 2010
SAMPE’s first ever major expo in Seattle, the home of Boeing Corporate Headquarters and Integrated Defense Systems. International attendees and major
manufacturers from multiple industries will come to find innovative new materials and business solutions in the SAMPE exhibit hall. Next May, expect a completely sold out exhibit show floor filled with 300 materials industry suppliers.
Reserve your exhibit space now, while selection is at it’s best.
seattle.sampe.org
2010 SAMPE Fall Technical Conference
Advanced Materials and Processes: Enabling the Future
Salt Lake City, UT
Conference: October 11-14, 2010 • Exhibit: October 12-13, 2010
Attend applications sessions, panels and workshops at the 2010 SAMPE Fall
Technical Conference. Benefit from the presentation of new materials and processes and how they can be applied to your current projects. Plan to spend
time in SAMPE’s exhibit hall to meet with exhibitors representing all facets of
the M&P industry. Discover what they have to offer to increase your productivity
and profitability.
Visit Utah.sampe.org.
For information about exhibits contact:
U.S. & Europe: Karen Chapman at [email protected] or
call +1 626.331.0616, ext. 616.
Asia: Jonathan Kan at [email protected] or call +603 5636 1788.
www.sampe.org
35
SAMPE 2010 Fall Technical Conference
11-14 October 2010 • Salt Lake City, Utah, USA
Advanced Materials and Processes: Enabling the Future
Call for Papers
SAMPE is currently seeking high quality technical papers that focus on advanced materials and processes, research,
development, applications and engineering for consideration for the 2010 Fall Technical Conference. Have your
findings published and present them to an engaged audience.
Applications
Aerospace Structures and Applications
Alternative Energy, Batteries, Energy Storage
Composites for Automotive Industry
Composites for Marine Applications
Composites for Ballistic / Armor Applications
Trends in Industrial Applications
Infrastructure Applications
Pressure Vessel Technology
Propulsion Technologies (Engines, Motors, Components)
Space Materials and Structures
Structural Health Monitoring
Wind Energy Materials and Technology
M&P Support Technologies
Adhesion and Adhesive Bonding
Composite Fatigue and Fracture
Composite Repair Technology
Durability, Impact, Crashworthiness and Damage
Environmental Considerations
Joints/Joining Composite Structures
Modeling and FEA of Composites
Non-Destructive Testing and Inspection
Recycling and Reuse Technology Advances
Testing: Materials and Structures
Manufacturing Technology
Automated Material Placement
Filament Winding and Fiber Placement Technology
Lean Manufacturing Processes and Affordability
Manufacturing, Tooling and Processing Advances
Manufacturing Very Large Structures
Manufacturing for High Volume Production
Out-of-Autoclave M&P for Aerospace
Pultrusion Technology
Resin Infusion/Liquid Molding Technology
36
Materials Technology
Aligned, Discontinued Fiber Materials
Carbon-Carbon Composites and Ceramics
Carbon Fiber Technology
Fire Safety and Materials Technology
Green Materials and Associated Processes
High Temperature Resins, Composites and Coatings
Infrastructure and Architecture Materials Technology
Metalmaterials Technology
Morphing Materials and Structures
Multifunctional Materials
Natural Materials: Fibers and Resins
Next Generation Fibers
Resins and Interface Technology
Sandwich, Foam and Core Structures
Smart Materials / Shape Memory
Textiles / Preform Technology
Thermoplastic Composites
Nanocomposites Technology
Nanocomposites: Analysis and Characterization
Nanocomposites: Electrical / Thermal Aspects
Nanocomposites: Processing Developments
Nanocomposites: Commercial/Industrial Applications
To take advantage of this opportunity, submit a 100-200
word abstract by February 1, 2010 for consideration.
Upon acceptance of your abstract, a full length technical
paper will be due by June 7, 2010. Contact Michelle at
[email protected] or + 1 626.331.0616 ext. 603
with any questions.
SAMPE Fall Tech Conference & Exhibits–Wichita, KS