Metal Roofing Beauty That Lasts!

Metal Roofing Beauty That Lasts!
Metal
Roofing
Trusted Quality
Tested Strength
VERTI-LOK
ROCK-LOK
Design Features
Design Features
• Approved for metal decking and wood
decking applications
• Architectural concealed fastener panel
•16ʺ width coverage
•1-3/4ʺ seam height
• Minimum roof slope 2/12 pitch
• 24 gauge
• Snap-Lock design
• Anti-siphon channel side lap design
• Available in flat pan and ribbed options
• Architectural Applications
• Approved for metal decking and wood
decking applications
• Architectural concealed fastener panel
•16ʺ width coverage
• Mechanically seamed 2ʺ seam height
• Minimum roof slope 1/12 pitch
• 24 gauge
• Available in flat pan and ribbed options
• Architectural Applications
Applied over decking
Applied over decking
Material
Material
•Galvalume
• SemCoat Plus
•Galvalume
• SemCoat Plus
Approvals: TDI • MIAMI-DADE • UL • FL CODE
Approvals: TDI • MIAMI-DADE • UL • FL CODE
VERTI-LOK
ROCK-LOK
Authorized Dealer
®
Metal Roofing Beauty That Lasts!
Residential
•
Commercial
Trusted Quality. Tested Strength.
•
Agricultural
•
Industrial
A complete line
of roof and wall
panel systems
• Lasts longer than
conventional roofing
• Low maintenance
• Color matched
accessories and trims
• Fire-resistant and
non-combustible
• May reduce insurance
premiums
• Energy efficient
• Superior warranty
• Impact resistant to hail
• Good value-to-life
cycle cost
SM-RIB
PBR & R PANELS
SEM-LOK
2-1/2ʺ & 1-1/4ʺ
CORRUGATED
5-V CRIMP
Design Features
Design Features
Design Features
• Architectural/structural exposed
fastener panel
•36ʺ width coverage roofing (PBR)
• Or siding (R-Panel)
•12ʺ on center spacing major ribs
with 2 equally spaced stiffening
ribs between major ribs
•1-1/8ʺ major rib height
• Minimum roof slope 1/12 pitch
• PBR – 26 and 24 gauge
• R – 29 gauge
• Architectural and Structural
Applications
Design Features
Design Features
• Architectural exposed
fastener panel
•36ʺ width coverage
•9ʺ on center spacing major ribs
with 2 equally spaced stiffening
ribs between major ribs
•3/4ʺ major rib height
• Minimum roof slope 3/12 pitch
• 29 and 26 gauge
• Anti-siphon channel side
lap design
• Architectural Applications
• Architectural exposed
fastener panel
•24ʺ width coverage (siding) and
21-1/2ʺ width coverage (roof)
•1-1/4ʺ and 2-1/2ʺ corrugations
on center spacing availability
•1/4ʺ or 1/2ʺ corrugation height
• Minimum roof slope 3/12 pitch
• Utility, 29, 26 and 24 gauge
• Architectural Applications
• Architectural exposed
fastener panel
•24ʺ width coverage
•7/16ʺ height inverted V(s)
• Minimum roof slope 3/12 pitch
• Utility, 29, 26 and 24 gauge
• Anti-siphon channel side
lap design
• Architectural Applications
Applied over decking
Applied over decking and over open framing
• Enhances resale value
• Architectural concealed fastener
standing seam panel
•16ʺ width coverage
•1ʺ seam height
• Minimum roof slope 2/12 pitch
• Hemmed snap lock design
• Low gloss paint finish
• 26 and 24 gauge
• Anti-siphon channel side lap design
• Available in Ribbed, Flat or Striated
• Nail fin design with slotted holes
for attachment
• Architectural Applications
Applied over decking
• 100% recyclable
Material
Material
Material
• Attractive appearance
• Galvanized Steel or Galvalume
• SemCoat SP or SemCoat Plus
• Galvanized Steel or Galvalume
• SemCoat SP or SemCoat Plus
•Galvalume
• SemCoat Plus
Approvals: TDI • MIAMI-DADE • UL • FL CODE
Approvals: TDI • UL • FL CODE
Approvals: MIAMI-DADE • UL • FL CODE
SM-RIB
PBR-PANEL RECOMMENDED FOR ROOFING
Applied over decking
Applied over decking
Material
Material
• Galvanized Steel or Galvalume
• SemCoat SP or SemCoat Plus
• Galvanized Steel or Galvalume
• SemCoat SP or SemCoat Plus
Approvals: UL • FL CODE
Approvals: TDI • MIAMI-DADE • UL • FL CODE
2-1/2ʺ CORRUGATED
5-V CRIMP
1-1/4ʺ CORRUGATED
SEM-LOK
R-PANEL RECOMMENDED FOR SIDING ONLY
RIBBED
See individual product descriptions for applicable certifications.
www.semetals.com
Technical Support 800.SE Specs 800.737.7327