SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS

Transcription

SINGLE SOURCE SUPPLIER
FOR BUILDING PRODUCTS
T E C H N I C A L S U P P O RT
1 (800) SE-SPECS [737-7327]
GENERAL INFORMATION
COMPANY HISTORY
For more than 40 years, Southeastern Metals Manufacturing
Company has been a trusted industry leader, providing superior
quality architectural sheet metal components to building
professionals, and to the do-it-yourselfer. From top to bottom,
the comprehensive range of products offered within a single
source, assures you the unlimited creative flexibility to
accomplish any job on time, and within budget.
LOCATIONS
Strategically located manufacturing and warehouse locations.
Our distribution network assures that when you specify and
order Southeastern Metals products that they will make it to your
jobsite promptly. See back cover for locations.
Materials
GALVANIZED
· Economical
· May be used in direct contact with concrete or masonry
· Durable long term performance
· Caution: do not use in conjunction with copper or pressure
treated lumber
All galvanized steel products are zinc coated as specified by
ASTM-A-653, Federal specification AA-S-775 E.
ALUMINUM
· Lightweight & highly corrosion resistant
· Will not stain adjacent surfaces
· Easily fabricated
· Avoid direct contact with dissimilar metal and with concrete
or mortar
All aluminum products are as specified by ASTM B-209
Federal specification QQ-A-250 E.
FINISH
All bare 26 gauge galvanized products have a zinc coating of
G-90 for corrosion resistance.
All painted products have a gloss polyester color coating
over primer.
CUSTOM PRODUCTS
Southeastern Metals manufactures a full line of typical
products, unusual needs may require custom trim components.
Our customer service/technical assistance staff can work from
your sketch, or provide a detail drawing. Upon customer
approval your custom component(s) can be fabricated,
packaged, and shipped, generally within 5 working days.
QUALITY ASSURANCE
Good sheet metal practice demands that trim & flashing products be
accurate and consistently manufactured to precision tolerances. We
are committed to the highest in total product quality by employing
the latest in roll forming technology; producing products as
efficiently as possible.
REFERENCE MATERIAL
US Standard steel and aluminum gauge decimal thickness table.
AISI THICKNESS TOL. RANGE
ALUMINUM SHEET
Gauge
No.
Thickness
Inches
Dec.
Equiv.
20
.0320
22
.0253
24
.0201
26
.0159
28
.0126
29
.0113
30
.0100
ST
.0145
EC
.0085
AISI THICKNESS TOL. RANGE
GALVANIZED STEEL SHEET
Approx
Toler. Lbs. Per
sq.ft.
Range
.0365
.0305
.0284
.0224
.0234
.0173
.0183
.0123
.0132
.0119
.0122
.0112
.0115
.0095
.0180
.0140
.0085
.0078
Gauge
No.
Thickness
Inches
Dec.
Equiv.
.451
20
.0396
.352
22
.0336
.282
24
.0276
.224
26
.0217
.177
28
.0187
.159
29
.0172
.141
30
.0157
.208
ST
.0120
.123
HT
.0100
Approx
Toler. Lbs. Per
sq.ft.
Range
.0436
.0356
.0376
.0296
.0316
.0236
.0247
.0179
.0217
.0157
.0202
.0142
.0187
.0127
.0125
.0118
.0115
.0098
1.656
1.405
1.154
.907
.782
.719
.657
.507
.408
Note: That nonferrous gauges (aluminum) are not the same as ferrous gauges (steel)!
Roof slope conversion table with roof pitch length multiplier.
Rise & Run
Multiply Flat
Area by
LF of Hips or
Valleys per LF of
Common Run
2 in 12
3 in 12
4 in 12
5 in 12
6 in 12
7 in 12
8 in 12
9 in 12
10 in 12
11 in 12
12 in 12
1.014
1.031
1.054
1.083
1.118
1.158
1.202
1.250
1.302
1.357
1.413
1.424
1.436
1.453
1.474
1.500
1.530
1.564
1.600
1.641
1.685
1.732
TABLE OF CONTENTS
METAL ROOFING
PRODUCTS
Code Approval/Description Page . . . . . . . . . . . . . . . . 1
5V -Crimp Metal Roofing Panels . . . . . . . . . . . . . . . . 2
Residential Full Line Trims & Accessories . . . . . . . . . 2
PBR & R Panel Metal Roofing Panels . . . . . . . . . . . . 3
SM-Rib Metal Roofing Panels . . . . . . . . . . . . . . . . . . 3
Verti-Lok Metal Roofing Panels . . . . . . . . . . . . . . . . . 4
Commercial Full Line Trims & Accessories . . . . . . . . 4
Sem-Lok Metal Roofing Panels . . . . . . . . . . . . . . . . . 5
Rock-Lok . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Corrugated Metal Roofing Panels . . . . . . . . . . . . . . . 6
FLASHING & EXTERIOR
TRIM PRODUCTS
Angle Flashing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Step Flashing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Eave Drip-Galvanized Steel . . . . . . . . . . . . . . . . . . . . 9
Eave Drip-Aluminum . . . . . . . . . . . . . . . . . . . . . . . . 10
Roof Edge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Apron/Dormer Flashing . . . . . . . . . . . . . . . . . . . . . . 12
Stucco Flashing . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Tin Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Ridge Roll-Galvanized . . . . . . . . . . . . . . . . . . . . . . . 13
Water Diverter . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Z Flashing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
VALLEY PRODUCTS
Preformed Valley . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
V Formed Valley . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
V Formed Valley Hemmed . . . . . . . . . . . . . . . . . . . . 15
Preformed Valley Hemmed . . . . . . . . . . . . . . . . . . . 16
Preformed Tile Valley 24” Open Angle . . . . . . . . . . . 16
Valley Rolled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
FASCIA & SOFFIT
PRODUCTS
Fascia Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Lap Siding Starter Strip . . . . . . . . . . . . . . . . . . . . . 18
H Molding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Soffit J Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Soffit System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
VENTILATION
PRODUCTS
Static Ventilators . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Turbine Ventilators . . . . . . . . . . . . . . . . . . . . . . . . . 20
Aluminum Soffit-Strip . . . . . . . . . . . . . . . . . . . . . . . 21
Venturi Vent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Universal Ridge Vent Aluminum . . . . . . . . . . . . . . . 22
Aluminum Under-Eave Louver . . . . . . . . . . . . . . . . . 23
Foundation Vents . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Weather Vent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Gooseneck Vent . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Galvanized Roof Jack . . . . . . . . . . . . . . . . . . . . . . . 26
Galvanized Shanty Cap . . . . . . . . . . . . . . . . . . . . . . 26
CONCRETE &
MASONRY PRODUCTS
Rod Chairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Tie Wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Anchor Bolts & Washers . . . . . . . . . . . . . . . . . . . . . 28
Bar Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Pier Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Bar Tie Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Cavity Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Rebar Safety Caps . . . . . . . . . . . . . . . . . . . . . . . . . 30
Rebar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Termite Shield . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Wall Tie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Dovetail Anchor . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
DRYWALL CORNER
BEAD PRODUCTS
Arched Corner Bead . . . . . . . . . . . . . . . . . . . . . . . . 34
Bullnose Corner Bead . . . . . . . . . . . . . . . . . . . . . . . 34
Drywall Corner Bead . . . . . . . . . . . . . . . . . . . . . . . . 35
J Bead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Galvanized Bullnose Corner Bead . . . . . . . . . . . . . . 36
Vinyl Corner Bead . . . . . . . . . . . . . . . . . . . . . . . . . . 36
L Bead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
BUILDER HARDWARE
PRODUCTS
Aluminum Plywood Clip . . . . . . . . . . . . . . . . . . . . . 37
Galvanized Plywood Clip . . . . . . . . . . . . . . . . . . . . . 37
Insulation Support Wire . . . . . . . . . . . . . . . . . . . . . 37
STUCCO & PLASTER
LATH PRODUCTS
Cornerite Inside Corner (Lath Accessories) . . . . . . . 38
Expanded Corner Bead (Lath Accessories) . . . . . . . 38
Casing Bead (Lath Accessories.) . . . . . . . . . . . . . . . 38
Corner Bead (Vinyl Lath Accessories) . . . . . . . . . . . 39
Expansion Joint (Vinyl Lath Accessories) . . . . . . . . 39
Casing Bead (Vinyl Lath Access.) . . . . . . . . . . . . . . 40
KAL-Korner Bead . . . . . . . . . . . . . . . . . . . . . . . . . . 40
METAL FRAMING
PRODUCTS
Drywall Studs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Drywall Track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Furring Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
HVAC TRIM & SHEET
METAL PRODUCTS
Can Stock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Mobile Home Skirting . . . . . . . . . . . . . . . . . . . . . . . 43
Flat Sheets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
STORM PANEL
PRODUCTS
Aluminum Storm Panels . . . . . . . . . . . . . . . . . . . . . 45
INDEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
METAL
ROOFING
A complete line of roof,
wall & fascia panel systems
for residential, agricultural,
commercial & industrial
applications.
7 Panel Profiles plus Flat Sheets
Multiple Gauges
More Attractive & Lasts Longer
than Conventional Roofing
Cost Effective & Energy Efficient
METAL ROOFIN G PRODUCTS
Reduces Insurance Premiums
Metro Dade and UL Listings
High Wind and Hurricane
Zone Ratings
Fire Resistant
100% Recyclable
Low Maintenance
Technical Assistance
Superior Warranties
Full Line of Color Matched
Accessories & Trims
Special Order Colors Available
1
METAL ROOFING PRODUCTS
METAL ROOFING PANELS
[DETAILED INSTALLATION GUIDES AVAILABLE]
5-V CRIMP
Design Features: Architectural exposed fastener panel.
• 24” width coverage
• Anti-siphon channel side lap design
• 7/16” height inverted V(s)
• Minimum roof slope 3/12 pitch
• Utility, 29, 26 and 24 gauge
Material: Galvanized Steel, Galvalume, SemCoat &
SemCoat Plus
METAL ROOF ING PRODU C TS
5V-Crimp Inside Closure
Universal Closure
5V-Crimp Outside Closure
1 Ridge/Peak
5 Eave Drip
9 Endwall
2 Ridge/Hip
6 Gable/Rake
10 J-Channel
3 Vented Ridge
7 Preformed
Valley
11 Pipeboot
4 Eave Flashing
8 Sidewall
Gambrell Flashing
Hex Head
Woodfast Screws
Butyl Tape
Sealant Tape
Touch-up
Paint
2
SM-RIB
• 36” width coverage (roofing or siding)
• 9” on center spacing major ribs with 2 equally spaced stiffening ribs between major ribs
• 3/4” major rib height
• 29 and 26 gauge
• 26 gauge Metro-Dade County approved
Material: Galvanized Steel, Galvalume, SemCoat
PBR & R PANELS
• 36” width coverage roofing (PBR) or siding (R-Panel)
• 12” on center spacing major ribs with 2 equally spaced stiffening ribs between major ribs
• 1-1/8” major rib height
• 29 & 26 gauge
Material: Galvanized Steel, Galvalume, SemCoat
3
COMMERCIAL LINE OF TRIMS & ACCESSORIES
Outside
Universal Closure
Gable/Rake
Ridge/Peak
Double Angle
Inside
Vented Ridge
Ridge/Peak
J-Channel
Outside Corner
Eave
Base Drip
Inside Corner
Drip Cap
Endwall
J-Channel
Post Cover
Sliding Door
Track Cover
Sidewall
VERTI-LOK
Design Features: Architectural / Structural concealed
standing seam panel.
• 1-3/4” seam height
• 24 gauge
• Snap lock panel design
• Striations are optional
Material: Galvalume & SemCoat Plus
4
SEM-LOK
Design Features: Architectural concealed fastener
standing seam panel.
• 1” seam height
• 26 and 24 gauge
• Hemmed snap lock design
• Low gloss paint finish
ROCK-LOK
Design Features: Architectural / Structural concealed
clip standing seam panel.
• 2” seam height
• 24 gauge
• Mechanically seamed design
5
2-1/2” & 1-1/4” CORRUGATED
• 21-1/2” width coverage (roof) and 24” width coverage (siding).
• 1-1/4” and 2-1/2” corrugations on center
spacing availability
• 1/2” corrugation height
• Utility, 29, 26 and 24 gauge
Material: Galvanized Steel, Galvalume, SemCoat &
SemCoat Plus
6
ANGLE FLASHING
Design Features: Protects against leaks at walls and chimneys to
roof connections.
• 10’ Lengths
FLAS HING & EXTER IOR TR IM PRODUCTS
• 20 Pieces Per Bundle - Pallet quantities vary
SIZE
1-1/2”X1-1/2”
3”X3”
4”X4’
4”X5”
4”X6”
5”X5”
5”X7”
6”X6”
GALVANIZED
ZINC/ALUM
ALUMINUM
26 GA. 28 GA.
ST
HT
26 GA.
.032 NOM .024 NOM
10090
10154 10154
10104
10168
10110 23167
10083
10112
10186
23352
10118
10196 10206
10084
21402
10126
40266
10128
10210 10216
HEMMED
3”X3-1/2”X1/2”
10156
4”X3-1/2”X1/2” 10102 10136 10174 10176
4”X4”X1/2” 10106 10138 10170 10172
4”X4-1/2”X1/2”
10182
4”X5-1/2”X1/2”
10192
5”X4-1/2”X1/2” 10122
10202 10204
5”X5”X1/2”
10198 10200
6”X5-1/2”X1/2” 10130
10212 10214
10072
PAINTED
BROWN 5”X5”
WHITE 5”X5”
BLACK 5”X5” 10129
7
10080
10082
FLASHING & EXTERIOR TRIM PRODUCTS
STEP FLASHING
Design Features: Separate pieces of Step Flashing are installed
as each course of shingles are applied. The upper edge of each
piece of Step Flashing should extend 2” above each course of
shingles. The lower edge should be 1/2” above the butte of the
shingles forming the next course. This step application allows for
all fasteners to be concealed.
Material: Aluminum and Galvanized Steel
Footnote: 100 Pieces Per Bundle, Pallet quantities vary
DESCRIPTION
FLAT
GALVANIZED
26 GA
ST
ALUMINUM
HT
FLASHING FLAT STEP 5”X7”
FLASHING FLAT STEP 5”X7” BLACK
FORMED 7”
EC
11956
11970
GALVANIZED
26 GA
ST
ALUMINUM
HT
ST
EC
0.024
FLASHING FORMED STEP 2”X3”X7”
11996 11998 11958
FLASHING FORMED STEP 2”X3”X7” BLACK
11972
12008
11984
11974
12014
18911
70195 11992
23369
21473
40230
DESCRIPTION
FORMED 8”
GALVANIZED
26 GA
HT
ST
EC
0.024
12002
12018 12020
DESCRIPTION
FORMED 10”
26 GA
FLASHING FORMED STEP 5”x7”x10”
ST
ALUMINUM
GALVANIZED
ST
ALUMINUM
HT
ST
EC
0.024
50019 8
FLASHING & EXTERI OR TR IM PR ODU CTS
DESCRIPTION
ST
EAVE DRIP-GALVANIZED STEEL
Design Features: Directs rain water run-off to drip away from fascia.
Material: Galvanized Steel
Footnotes: 10’ Lengths
• 25 pieces per carton
• Pallet quantities vary
• Available in zinc/aluminum coating; use item #11062 6”x 2-1/2 F #11290
• Other sizes, colors & roof pitches available upon request.
• 6”x2-1/2”F available in 26 GA forest green, use item # 11290 & painted gray,
use item #11290
NAME & FACE
SIZE
MILL
26 GAUGE
BROWN
BLACK
WHITE
BEIGE MILL
4X1” F
4X1-1/8” F
4-1/2X1-1/8” F
4-1/2X1-1/4” F 11020 11222
11426
11208
5X1-1/8” F
11443
5X1-1/2” F
11040 11232
11442
60034
5X1-3/4” F
20747
11440
5X2” F
11046
6X1-1/8” F
6x1-1/2” F
11050
11052
6X1-3/4” F
11056
11054
6X2-1/2” F
11048 11244 11264 11454
11214
7X1-1/2” F
11092
7X2-1/2” F
11088 21404 11090
8X2-1/2”F
11096
9
HT
ST
BROWN
BLACK
WHITE
BEIGE
MILL
11422
11330
11332
11324 11224
11430
11322
11316 11220 11256 11419
18612
11340 11230
11436
11238 NH/NR 11266NH/NR 11446NH/NR
11356 11240
11448
11354
11352 11236
11444
EAVE DRIP-ALUMINUM
Design Features: Directs rain water run-off to drip away from fascia.
Material: Aluminum and Painted
.025 NOM
.032 NOM
NAME & FACE
SIZE
BROWN WHITE BROWN WHITE
.020 NOM
BROWN WHITE
MILL
BROWN
WHITE
BLACK
CLAY
11294
11168 11368 11248
11274
11366
11204 11412
11296
11170 11370 11250
11390
11402
11194 11396
10
4”, 1”F
4-1/2”, 1”F
4-1/2”, 1-1/8”F
4-1/2”, 1-1/4”F
11172 11372
5”, 1-1/2”F
29997 29998
11392
5”, 1-3/4”F
60053 60051
11384
6”, 1-3/4”F
6”, 2-1/2”F
11200 11404 11196 11398 11202 11408
ST
ROOF EDGE
Design Features: Protects roofing from water damage along entire eave.
Material: Galvanized Steel, Aluminum and Painted
Footnotes: 10’ Lengths. Also available in 26 GA Galvalume.
• For 4”x2” face use item #15439
• For 6”x3” face use item #15463
• For 3”x1-1/2” F use item #15425
• Carton and pallet quantities vary - Call for amounts
ALUMINUM
NAME & FACE
SIZE
ST
0.025
MILL
WHITE
BROWN
3”, 1-1/2” FACE
15525
4”, 2” FACE
23049
6”, 2” FACE
6”, 3” FACE
50058
15565
15569
26577
15491
98058
WHITE
BROWN
GALVANIZED STEEL
NAME & FACE
SIZE
MILL
3”, 1” FACE
3”, 1-1/2” FACE
4”, 2” FACE
4-1/2”, 2-1/2” FACE
5”. 2” FACE
5”, 2-1/2” FACE
5”, 3” FACE
6”, 2” FACE
6”, 3” FACE
8”, 4” FACE
23290
11
29 GA
26 GAUGE
24 GA
MILL
WHITE
BROWN
ST
MILL
WHITE
HT
BROWN MILL
15535
15531 15585
15539
15421
15541
15547
15431
15435 15589
15485
50021
15549
15453
15449
15555
15459
15553 15593
15559
15455 15595 15507
15562
15471
TIN CAPS
Design Features: Utilized in securing the moisture barrier felt paper
base sheet to roof decks.
Material: 30 Gauge Galvanized Steel
Footnote: Galvanized Tin Caps Miami Dade County product control
approved for corrosion resistance.
ITEM
DESCRIPTION
DIAMETER
16741
16742
TIN CAPS TN
TIN CAPS GALVANIZED
1-5/8”
1-5/8”
PER CTN
PER PLT
50 lbs
50 lbs
48
48
STUCCO FLASHING
Design Features: Used as a stucco stop to separate either
wallboard siding or stucco plaster.
DESCRIPTION
GAUGE
SIZE
26
26
QTY PER PLT
5”
5”
25
25
500
500
APRON/DORMER FLASHING
Design Features: Protects roofing from water damage; wall to roof
connections typically beneath a dormer.
Footnote: 20 Pieces Per Bundle, Pallet quantities vary
DESCRIPTION
26 GA
28 GA
ST
HT
APRON FLASHING 7-1/2”
11889 11899 11905 11907
APRON FLASHING 8-1/2”
11903
APRON FLASHING 7”
11909
DORMER FLASHING 8”
10866 10868
12
ITEM
16017
STUCCO FLASHING 16019 STUCCO FLASHING EX. BEND
RIDGE ROLL-GALVANIZED
Design Features: Flashing for hip and ridge roof sections. For shingle or
metal roof applications.
Footnote: Corrugated edge to match roofing profile.
• 10’ Lengths
• 10 per bundle minimum order
SIZE
ST
10”
10”
12”
15637
15636
70008
DESCRIPTION
SIZE
ST
HT
RIDGE ROLL
RIDGE ROLL
RIDGE ROLL
RIDGE ROLL
10”
12”
14”
18”
15648
15652
15654
15658
15650
DESCRIPTION
RIDGE ROLL 1-1/4” CORRUGATED
HT
WATER DIVERTER
Design Features: Directs rain water run-off away from entrances and
other structures.
Material: Galvanized Steel, Aluminum
Footnote: 10’ Lengths
DESCRIPTION
WATER DIVERTER
WATER DIVERTER
WATER DIVERTER
WATER DIVERTER
13
SIZE
COLOR
GALVANIZED STEEL
26 GA
ST
HT
ALUM.
ST
7-1/2”
17676 17690 17692
9”
17682
7-1/2” BLACK
17684
7-1/2” BROWN
Z FLASHING
Design Features: Protects top edge of siding sheets from water
infiltration.
Material: Galvanized, Steel, Aluminum
Footnotes: 10’ Lengths; 20 Pieces Per Bundle, 2500 Per Pallet
SIZE
2”X5/8”X3/8”
2-1/8”X1/2”X3/8”
2-1/4”X3/8”X3/8”
GALVANIZED STEEL
HT
17845
17837
ST
26 GA
17843
17839
17835
17807
60039
14
VALLEY PRODUCTS
Design Features: Directs rain water run-off where two slopes form a
valley “V” drainage to the eave.
Material: Galvanized Steel & Aluminum
• 10 per bundle minimum order, 100 Pieces Per Pallet
“V” FORMED VALLEY
DESCRIPTION
NO HEM
GALVANIZED
26 GA 28 GA
VALLEY FORMED 15”
ST
12038
“V” FORMED VALLEY hem
DESCRIPTION
HEM
GALVANIZED
26 GA 28 GA
VALLEY FORMED 18”
12037
ST
PREFORMED VALLEY
DESCRIPTION
NO HEM
15
VALLEY PREFORMED 18”
GALVANIZED
26 GA 28 GA
ST
14866 18484
PREFORMED VALLEY hemMED
DESCRIPTION
HEMMED
GALVANIZED
26 GA 28 GA
ALUM.
ST
.032 NOM
VALLEY PF 18” BLACK HEM 14897
14896
VALLEY PF 18” BROWN HEM
14898
VALLEY PF 18” HEM
14868 14877
OPEN WATER BREAK
DESCRIPTION
TILE VALLEY 24”
GALV
ALUM
ZINC/ALUM
26 GA
.032 N
26 GA
60037
60041
CLOSED WATER BREAK
DESCRIPTION
TILE VALLEY 24” CLOSED
GALV
ALUM
ZINC/ALUM
26 GA
.032 N
26 GA
22095
16
PREFORMED TILE VALLEY
24” OPEN ANGLE
VALLEY ROLLED
Design Features: Rolled sheet metal available in
various thicknesses and widths. Both in Galvanized
Steel & Aluminum for multiple uses of flashing or “do
it yourself projects.”
Material: Galvanized Steel & Aluminum
ALUMINUM
GALVANIZED
SIZE
HT
ST
26 GA.
.024 NOM
.019 NOM
STANDARD
.010 NOM
ECONOMY
.013 NOM
WHT/BRN
6” X 10’
17472
17388
8” X 10’
17480
10” X 10’
17404
17275
17191
12” X 10’
17413
17291
14” X 10’
17420
17306
17197
16” X 10’
17426
20” X 10’
17439
17339
24” X 10’
17447
17359
8” X 25’
17482
17393
10”X25’
17406
10”X25’
17277
12” X 25’
17415
17293
14” X 25’
17422
16” X 25’
17428
17330
20” X 25’
17441
24”X25’
17355
4” X 50’
17465
6” X 50’
17471
17387
8” X 50’
17479
17214
17390
10” X 50’
17403
17215
17280
17208
17274
12” X 50’
17412 17407 17216
17295
17290
14” X 50’
17419 17416
17210
17305
16” X 50’
17425 17423 17222
20766
17317
17324
17211
17318
18” X 50’
17431 17429 17223
17331
17332
20' X 50’
17438 17435* 17226
17212
17338
24” X 50’
17446 17442 17227
17352
28”X50’
17435
30” X 50’
17456
17237
36” X 50’
17460 17458
17369
12”X50’ BLK 17467 17467
28X50”
17435
10” X 70’
17402
17
FASCIA & SOFFIT PRODUCTS
FASCIA TRIM
Design Features: Aluminum Fascia Trim covers existing wood fascia,
providing a moisture barrier and maintenance-free roof edge fascia.
Material: .019 Painted Aluminum
• Pallet quantity may vary
DESCRIPTION
SIZE
ST WHITE
ALUMINUM
ST BROWN
ALUMINUM
PER
CTN
FASCIA TRIM
4”X12’
17557
17532
25
FASCIA TRIM
6”X12’
17559
17534
25
FASCIA & S OFF IT PR ODU CTS
LAP SIDING STARTER STRIP
Design Features: Provides a straight, true & level starter for lap siding.
Provides a straight starter for the finished siding jobs.
Material: Aluminum
Footnotes:
* Universal for vinyl, aluminum, wood & hardboard siding.
* Mill finished aluminum for excellent corrosion resistance.
* Slotted Nail hole spaces to allow for expansion & contraction.
* Hemmed edges & stiffener ribs help to maintain alignment.
PRODUCT
CODE
17528
FINISH
MILL FINISH
ALUMINUM
GAUGE
26
LENGTH
10’-0”
CTN WT
(lbs)
39
PER
CTN
PER CTN
PALLET
50
45
18
H-MOLDING
Design Features: Used to splice butt joints of plywood soffit systems.
Material: Aluminum Extrusion
12754
DESCRIPTION
SIZE
MATERIAL
PER CTN
H-MOLDING
3/8”X12’
ALUMINUM
50
SOFFIT J CHANNEL
Design Features: Used to secure the soffit system at the sidewall or
undereave connection.
Material: Aluminum
DESCRIPTION
FAS C IA & S OF FI T PRODUCTS
SOFFIT J CHANNEL
SIZE
12’
ST WHITE
ALUMINUM
ST BROWN
ALUMINUM
17566
17537
SOFFIT SYSTEM
Design Features: Aluminum Soffit Panels protect the underside of roof
overhang or porch ceilings. Perforated Panels allow eave air intake to
circulate through the attic to reduce heat and unwanted moisture.
Material: Painted, Perforated
DESCRIPTION
SIZE
PERFORATED
SOFFIT (BROWN)
12”X12’
17541
17
SOFFIT (WHITE)
12”X12’
17564
17
19
PER CTN
VENTILATION PRODUCTS
12” & 14” TURBINE
Design Features:
• Maintenance-free dual ball bearing system
• Heavy-duty polypropylene bracing system
• Adjustable base
• 12”– 95 square inch net free area
• 14” – 132 square inch net free area
• Limited lifetime warranty
Material: Aluminum and Galvanized Steel
MODEL
NUMBER
MATERIAL
TIB-12S
Turbine and Base
Internal Bracing
TURBINES WITHSTAND HURRICANE
FORCE WINDS OF 150 mph!
AVAILABLE COLORS
MILL
WHITE
BLACK
BRACING
DIAMETER
OPENING
BROWN
NET FREE AREA NO. PER CARTON
COMPLETE SETS - TURBINE WITH BASE Internal Bracing
TIB-12S
TIB-14S
ALUMINUM
17007
INTERNAL
12”
95 sq. in.
1 SET
ALUMINUM
TIBS1400
INTERNAL
14”
132 sq. in.
1 SET
Design Features: Engineered for efficient roof ventilation
• Roof Louvers have 8”x8” Aluminum Screen
• Ideal for kitchen or bathroom exhaust caps on roof
• Fast, Easy-Up Installation
• Saves energy and reduces moisture damage to painted surfaces
• Helps prolong the life of your roof
• Rain diverter bead on base
Material: Aluminum & Galvanized Steel
MODEL
NUMBER
AVAILABLE COLORS
MILL
BLACK
BROWN
FLASHING
WHITE
GRAY
DIMENSIONS
HEAVY-DUTY POLYPROPYLENE MATERIAL WITH ALUMINUM SCREEN
SLP 61
15898
16-1/4”X19-1/2”
RV-61
PLASTIC
CSA Approved
OPENING
SIZE
NET FREE
AREA
NO. PER
CARTON
PER
PLT
9”
61 sq. in.
12
20
20
VENTILATION PROD UC TS
STATIC VENTILATORS
VENTURI VENT
Design Features: Designed for RIDGE & HIP applications.
• External baffle shingle-over
• Built-in end plug
• 18” NFA per linear foot
• Individual cartons can ship UPS
• 30-Year limited warranty;
5-year Replacement Plus protection
• Dade County Approval
Material: Durable Polypropylene
MODEL
NUMBER
ITEM
NUMBER
MATERIAL
NET FREE AREA
PER LIN. FT
NO. PER
CARTON
18 sq. in.
10
VENTURI VENT
BLACK
VVP POLYPROPYLENE
VENTIL ATION PRODUCTS
84718
ALUMINUM SOFFIT-STRIP
Design Features: Provides a continuous under soffit air
flow to provide superior ventilation.
Material: Aluminum
SA SERIES
SA SERIES
MODEL
NUMBER
AVAILABLE COLORS
MILL
WHITE
WIDTH
BROWN
SECTION FREE
LENGTH AREA
NO. PER
CARTON
SA SERIES Bi-Directional Louvers (1/8” x 1” louvers)
SV201
15914
15916
15915 2”
8 ft.
92 sq. in.
50
2”
8 ft.
61 sq. in.
50
SP SERIES Perforated 1/8” Hole Pattern
SP-8
SP SERIES
21
16086
16088
16087
UNIVERSAL RIDGE VENT-ALUMINUM
Design Features: Removes superheated attic air
• Self-flashing
• Low profile blends easily with roof line
• Reduces damage to painted surfaces in winter from trapped moisture
• Weather baffle of aluminum is built into the ridge vent shape
• Can be installed on new or existing construction.
• May be installed with or without connectors
Material: Embossed Aluminum
AVAILABLE COLORS
MILL
WHITE
BROWN
BLACK
BRONZE W. GRAY
NET FREE
AREA
PER LIN. FT.
NO. PER
CARTON
MODEL
NUMBER
RIDGE VENT Bulk 10 ft. lengths
RV-10 H.D.
RV-10 98079
84401
98080
98082
98081
16 sq. in.
12
84405
84403
84402
16 sq. in.
12
NA
36
84406
END/PLUG CONNECTOR
RAF-12R
# 15900 (BLACK PLASTIC)
22
FOUNDATION VENTS
11854
ALSL
SQ FT OF
FLOOR AREA
1000
13
1500
20
2000
27
2500
33
3000
40
Design Features:
• Aluminum Screen
• Adjustable Sliding Damper
• Aluminum screen furnished
Material: Cast Aluminum, Stamped Aluminum & Plastic
ALSL Cast Aluminum
Sliding Damper
MODEL
NUMBER
COLORS
MILL
CAST ALUMINUM
FA 108
11854
SIZE
NET FREE
AREA
PER
CARTON
16”X8”
36 sq. in. 12
U.S. Building Codes require 1 sq. ft. of ventilation for every 300 sq. ft. of crawl space. However, certain areas require 1 sq. ft. of
ventilation for every 150 sq. ft. of crawl space. If you are in these areas, you should double the number of foundation vents used.
Note: Proper vapor barriers should be used in conjunction with foundation vents.
LOUVERS
Design Features: Vent opening designed to keep out insects
and weather while providing proper wall or under eave
ventilation. Eleminates damage caused by trapped moisture.
Material: Aluminum
ALUMINUM UNDER-EAVE LOUVER
MODEL
NUMBER
UA 16-8
UA 16-4
23
AVAILABLE COLORS
MILL
17103
17101
WHITE
BROWN
17104
17102
SIZES
FREE AREA
PER
CARTON
16”X8”
16”X4”
56 sq. in.
27 sq. in.
12
24
WEATHER VENT
Design Features:
• Screened external wind baffle provides superior air flow with maximum weather protection
• Utilized with gable and/or undereave soffit vents, this system provides an effective natural air flow
• Self flashing flanges allow for easy installation
• Install Off Ridge on roof slope for unobstructed peak line
• Available in other colors and gauges, Pallet quantities vary
• U.S. Patent Number: 7,044,852 B2
• Miami Dade approved, NOA Number 03-1008.02
Material: Galvanized, Galvalume Steel
DESCRIPTION
MILL
WHITE
BROWN
SIZE
NET
SQ. IN.
PER CARTON
2’
4’
6’
8’
10’
4’
4’
8’
4’
6’
8’
10’
52
104
156
207
259
2
1
2
2
2
144
248
248
2
2
2
BLACK
17612
17590
80004
63000
63003
63002
63001
60548
17642
17594
17603
60549
17643
17595
17604
17611
17588
60014
60016
60028
17625
17626
17627
17624
26 GA GALV
26 GA GALV
26 GA GALV
26 GA GALV
26 GA GALV
26 GA GM TILE
26 GA GM TILE
26 GA GM TILE
26 GA GALV TILE
26 GA GALV TILE
26 GA GALV TILE
26 GA GALV TILE
AVAILABLE COLORS
A slight breeze up and over the vent will
exponentially increase attic air exhaust!
Wind
&
Weather
Elements
Attic Exhaust
Pressure Gradiant
24
GOOSE NECK VENT
Design Features:
• Sheltered internal air dampers provides one-way air venting with damper
• Round design provides superior air flow
• Most effective when utilized in a kitchen or bath exhaust application
• Self flashing flanges make for easy installation on new or existing construction
• Available without dampers
• Available in higher profile for tile special order
Materials: 26 Gauge Galvanized Galvalume Steel or Aluminum
DESCRIPTION
26 GA GALV. 4” NO DAMPER
26 GA GALV. 4” WITH DAMPER
MILL
17614
17615
17618
17619
17609
22999
WHITE
BROWN
BLACK
17640
17592
60027
60031
60035
17637
17587
17644
17596
17605
NET
SQ. IN.
PER CARTON
12
12
18
18
30
30
12
12
6
6
6
6
26 GA GALV. 4” NO DAMPER TILE
60024
14
6
26 GA GALV. 6” WITH DAMPER TILE
26 GA GALV. 10” NO DAMPER TILE
26 GA GALV. 10” WITH DAMPER TILE
60021
60022
60020
20
35
35
4
4
4
26 GA GM. 4” NO DAMPER
26 GA GM. 4” WITH DAMPER
60013
60011
60630
60635
60012
60010
12
12
18
18
35
30
12
12
6
6
6
6
.020 AL 4” NO DAMPER
.020 AL 4” WITH DAMPER
17575
60029
60025
12
17576
12
17579
12
12
6
.020 AL 10” NO DAMPER
17568
17570
.020 AL 4” NO DAMPER TILE
.020 AL 10” NO DAMPER TILE
25
AVAILABLE COLORS
17633
60262
17583
30
30
6
6
60023
17572
16
35
12
4
GALVANIZED SHANTY CAP
Rain cap for snap lock round pipe. For 3”-8” diameter snap lock pipe.
MODEL
NUMBER
15931
15933
SIZE
3”
5”
PER
CARTON
100
50
SIZE
GALVANIZED ROOF JACK
MODEL
NUMBER
SIZE
PER
CARTON
17510
17512
17514
17519
17521
3”
4”
5”
6”
7”
15
12
9
12
12
Rain cap with wind band & roof, deck mounting flange.
• Items are 4/12 pitch
• Also available in flat
26
ROD CHAIRS
Design Features: To maintain the steel a proper
distance from forms. Rod chair bar supports accurately
locate and firmly hold in place all reinforcing steel
before and during the placing of concrete. Single level
design as required by specification.
DOUBLE
Installation: Spacing between rod chair bar supports
is a maximum of 4’-0” o.c. and 2’-0” from corners.
For further information refer to your building code for
proper distances.
TRIPLE
ITEM STEEL
W SIZE H PER CTN
15072
2
9” 3-1/4”
100
15145
3
12” 3-1/4”
100
14997 PLASTIC2-1/4”
20
14998 PLASTIC2-1/4”
500
C ONC RETE & MAS ONRY PRODUCTS
PLASTIC
TIE WIRE
Design Features: Proper tying of reinforcing bars
is essential in order to maintain position during
concrete placement. 340 ft. coil allows virtually
any length wire ties.
ITEM
17092
27
DESCRIPTION
GAUGE
BLACK TIE WIRE 3.5# ROLL
16
PER
CTN
20
PER
PLT
960
CONCRETE & MASONRY PRODUCTS
ANCHOR BOLTS & WASHERS
Design Features: Bolt only with code minimum
embedment with 3000 PSI concrete will resist
4,800 lbs, see washer capacity below.
Materials: Black and galvanized steel
Footnote: Other sizes available on request . All
references to bolts or MB’s are structural quality through
bolts equal to or better than ASTM Standard A307
ITEM
SIZE & DIAMETER
1 0003
10019
10021
10006
1/2” X 10”
1/2” X 6”
1/2” X 8”
5/8” X 10” W/3” X 1/8” SLOTTED WASHER
PER
CTN
PER
PLT
50
50
2500
50
2500
50
CONCRETE & MAS ONRY PROD UC TS
ANCHOR BOLT
WITH NUT & 1” WASHER
28
PIER CAPS
Design Features: Provides an effective metal moisture
barrier separation between concrete and wood floor
framing.
ITEM
10485
10495
DESCRIPTION
SIZE
PIER CAP
PIER CAP
GAUGE PER CTN
8” X 8”
8” X 16”
26
26
50
50
PER CTN
500
500
BAR TIES
Design Features: Proper tying of bars is
essential in order to maintain their position
during concrete placement. Eye hooks on
bar tie ends allow fast securement by
hand or with available installation tool.
Materials: 16 gauge black,
soft-annealed wire
29
ITEM
SIZE
BUNDLE
34002
34004
34003
34006
34005
4”
5”
5-1/2”
6”
6-1/2”
1000/BD
1000/BD
1000/BD
1000/BD
1000/BD
PER
CTN
4,000
4,000
4,000
4,000
4,000
PER
PLT
54
63
63
63
63
BAR TIE TOOLS-TWISTER
Design Features: Swivel or spiral twisting handle
speeds tying process.
ITEM
10430
10431
DESCRIPTION
PER CTN
BAR TIE AUTOMATIC TWISTER TOOL
BAR TIE MANUAL TWISTER TOOL
1
1
CAVITY CAPS
Design Features: Preformed center locks firmly between
concrete block cells to stop mortar infiltration.
DESCRIPTION
CAVITY CAP #2 FOR 8”X16” BLOCK
PER CTN
PER PLT
200/CT
8400
REBAR SAFETY CAPS
Design Features: Provides a safety cover for
the tops of exposed reinforcing bars.
Material: Safety Orange Plastic
Footnote: Not for impalement protection
ITEM
DESCRIPTION
14980 REBAR SAFETY CAP
SIZE
PER CTN
#3 - #8
250
30
ITEM
10564
ITEM
DESCRIPTION
14949
14950
14952
14956
14958
14959
14960
14975
50016
14965
14967
14968
14970
18605
14974
31
REBAR
REBAR
REBAR
REBAR
REBAR
REBAR
REBAR
REBAR
REBAR
REBAR
REBAR
REBAR
REBAR
REBAR
U
STEEL
SIZE
COLOR
ANGLE
3
3
3
4
4
4
4
5
5
5
5
5
5
6
5
3/8”X10’
3/8”X2’
3/8”X4’
1/2”X10’
1/2”X2’
1/2”X20’
1/2”X4’
5/8”X1’X4’
30”X30”
5/8”X10’
5/8”X2’
5/8”X20’
5/8”X4’
3/4”X20’
3’X3’
ORANGE
ORANGE
ORANGE
YELLOW
YELLOW
YELLOW
YELLOW
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
BLUE
WHITE
STRAIGHT
STRAIGHT
STRAIGHT
STRAIGHT
STRAIGHT
STRAIGHT
STRAIGHT
BENT 90O
BENT 90O
STRAIGHT
STRAIGHT
STRAIGHT
STRAIGHT
STRAIGHT
BENT 90º
REBAR
Design Features: Provides expansion and contraction
reinforcement for concrete.
Material: ASTM A615 (60,000 PSI Minimum Yield
Strength)
ASTM STANDARD REINFORCING BARS
BAR SIZE
DESIGNATION
WEIGHT
POUND
PER FOOT
#3
0.376
0.375 (3/8”)
0.11
1.178
#4
0.668
0.500 (1/2”)
0.20
1.571
#5
1.043
0.625 (5/8”)
0.31
1.963
#6
1.502
0.750 (3/4”)
0.44
2.356
NOMINAL DIMENSIONS - ROUND SECTIONS
DIAMETER
INCHES
CROSS
SECTIONAL
AREA
SQ. INCHES
PERIMETER
INCHES
SCALLOPED
WALL TIE
Design Features: Firmly anchor brick veneer wall
courses to the supporting wood or block wall structure.
Deep corrugations provide strong anchorage in mortar
courses. Heavy galvanizing over steel protects against
corrosion and rust. Easy to install by bending at proper
angles and nailing to wood header, or use flat when
veneering brick to masonry substructures. Codes usually
require one wall tie for three sq. ft. of surface area. Wall
Ties are spaced two ft. on center horizontally and 16-18
inches on center vertically.
STRAIGHT EDGE
Materials: Standard gauge and 22 gauge galvanized steel.
DIMENSIONS
W
L
ITEM
34400
34401
34402
34403
7/8
3/4
7/8
3/4
7
7
7
7
DESCRIPTION
STRAIGHT EDGE DUPLEX
gRIPTITE-sCALLOPED
STRAIGHT EDGE DUPLEX
gRIPTITE-sCALLOPED
GAUGE PER
CTN
22
22
STD
STD
500
500
500
500
PER
PLT
48
48
64
64
TERMITE SHIELD
Design Features: Provides a moisture & termite barrier
for wood sill-to-concrete contact.
ITEM
17049
17043
17051
DESCRIPTION
TERMITE SHIELD
TERMITE SHIELD
TERMITE SHIELD
GAUGE
28
ST
ST
SIZE
4”X2”X10’
8”X2”X10’
4”X2”X10’
BNDL 20/BD
20/BD
20/BD
PER PLT
500
32
DOVETAIL ANCHOR
Design Features: To anchor brick or brick veneer
wall courses to the supporting wall structure. Heavy
galvanizing over steel protects against corrosion and
rust. For poured in place concrete columns or walls.
Material: 24 & 16 gauge galvanized steel.
ITEM
18842
18841
18733
20804
10918
SIZE
DESCRIPTION
GAUGE
8’
10’
3-1/2”
5-1/2”
7-1/2”
DOVETAIL ANCHOR SLOT
24
24
16
16
16
DOVETAIL ANCHOR SLOT
DOVETAIL ANCHOR
DOVETAIL ANCHOR
DOVETAIL ANCHOR
PER
CTN
PER
PLT
25 360
25 360
500 12000
400 9600
300 7200
SLOT
ANCHOR
33
DRYWALL CORNER BEAD PRODUCTS
VINYL DRYWALL BEADS
ARCHED CORNER BEAD
Design Features: Pre-notched to form curves easily.
Improved slots for better radius.
ITEM
10513
DESCRIPTION
CORNER BEAD ARCHED
Flange
WIDTH LENGTH
1-1/4”
10’
CTN PLT
50 2500
Arched Corner Bead
DRYWALL CORNER BEAD PR OD UC TS
BULLNOSE CORNER BEAD
Design Features: Provides an architecturally
attractive corner that is both durable and straight
for a soft appearance.
ITEM
DESCRIPTION
Flange
Width RADIUS LENGTH
10514 CORNER BEAD BULLNOSE
3/4”
10’
CTN PLT
35 1750
Bull Nose Corner Brad
34
DRYWALL CORNER BEAD
Design Features: Extra wide knurled flanges provide excellent joint
compound, paint and texture plaster bond adhesion. Superior, strong,
straight, protection from edge chipping or cracking. Excellent for use
with fast setting joint compounds for easy finishing. Can be fastened
to drywall corners with nails, screws or clinching tools. Unlike paper
tape, steel nose beads are the most problem free from scuffing and
fuzing.
Material: Galvanized & Electroplated (Grey) Steel
DRYWAL L COR NER BEAD PRODUCTS
GALVANIZED CORNER BEAD
ITEM
LENGTH
APPROX
PKG/WT
PER
CTN
PER
PLT
8’- 0”
9’- 0”
10’- 0”
12’- 0”
56
56
69
84
63
56
50
50
3087
2744
2450
2450
10530
10532
10524
10526
GREY CORNER BEAD
ITEM
LENGTH
APPROX
PKG/WT
PER
CTN
PER
PLT
10542
10544
10534
8’- 0”
9’- 0”
10’- 0”
56
48
69
63
56
50
3087
2744
2450
“J” BEADS
Design Features: This is a channel type trim that provides a neat
protective edge for wallboard at windows and doors. Widely used as
a terminal at intersections of wallboard and other surfaces
Footnote: Added advantage of not requiring treatment of the joint
before the wall is finished.
ITEM
12842
12840
12839
35
DRYWALL SIZE
5/8”
1/2”
1/2”
LENGTH
8’
8’
10’
PER CTN
63
63
50
PER PLT
3087
3024
2450
DRYWALL CORNER BEAD PRODUCTS
“L” BEADS
Design Features: Easily installed angle-type trim provides
finished appearance for wallboard edges at door and
window openings. Hemmed edge on front flange adds
rigidity and keeps bead straight. Nailing flange is knurled
and perforated to aid cement adhesion.
ITEM
DRYWALL SIZE
LENGTH
13039
1/2”
10’
PER CTN PER PLT
50
3000
DRYWALL BEADS
CORNER BEAD
ITEM
DESCRIPTION
Flange
WIDTH
10512
10518
CORNER BEAD
CORNER BEAD
1-1/4”
1-1/4”
LENGTH
CTN
PLT
8’
10’
35
50
2500
2500
DRYWALL CORNER BEAD PR OD UC TS
Design Features: Strong, durable and straight
reinforcement for drywall and veneer plaster corners.
Corner Bead
BULLNOSE CORNER BEAD
Design Features: Corner bead used for a smooth, rounded
finish on exposed edges of wallboard. Apply using standard
industry practice. Available in a 3/4” radius, in galvanized steel.
ITEM
DESCRIPTION
LENGTH
10505
BULLNOSE CORNERBEAD
10’
3/4” Radius
PER CTN PER PLT
40
2400
36
GALVANIZED PLYWOOD CLIP
Design Features: Easy and fast, just slip over
sheathing edge. Snug self-lock keeps clip firmly in
position throughout panel placement. Eliminates
unreliable wood edge blocking.
ITEMS
SIZE
34027 7/16
34025 15/32
34026 5/8
PER
GAUGE CTN
20
20
20
250
250
250
PER
PLT
Materials: 20 Gauge Galvanized Steel
ALUMINUM PLYWOOD CLIP
Design Features: Easy and fast, just slip over
sheathing edge. Snug self-lock keeps clip firmly in
position throughout panel placement. Eliminates
unreliable wood edge blocking.
Materials: Aluminum extrusion
ITEMS
SIZE
PER
CTN
34019
34021
34023
34022
1/2
5/8
3/4
7/16
2000
2000
2000
2000
13
4
BU IL DER HARDWARE PRODUCTS
Footnote: With built in spacer
INSULATION SUPPORT WIRE
Design Features: Insulation Spikes are the simple,
quick and economical way to hold insulation in
place between studs and joist. Easy to use, just
flex-locate and it will remain locked until desired to
remove.
Materials: 13 Gauge Galvanized Steel
37
ITEM
34015
34016
SIZE GAUGE
PER
CTN
16”
24”
500
500
13
13
PER
PLT
50
100
100
STUCCO & PLASTER PRODUCTS
LATH ACCESSORIES
CASING BEAD
Design Features: Creates a flush stucco stop for
framed doors, windows, and other openings. The
casing are designed with a ridge of nail holes to
provide easy installation.
ITEM
DESCRIPTION
SIZE
10521
CASING BEAD
1/2”X10’
PER CTN PER PLT
30
600
EXPANDED CORNER BEAD
STUCCO & PLASTER L ATH PROD UC TS
Design Features: Expanded diamond mesh wings
allow for keying the plaster right up to the nose of the
bead. Provides plumb reinforcement at corners.
Material: Galvanized Steel for corrosion resistance.
ITEM
DESCRIPTION
LENGTH
PER CTN
PER PLT
10508
10507
CORNER BEAD
CORNER BEAD
8’
10’
40
30
800
630
CORNERITE INSIDE CORNER
Design Features: Finished edge corner lath provides
reinforcement for plastered inner corners. Preshaped
to 105% for a snug fit in 90% corners with wings
tight against the plaster base.
Material: Galvanized Steel for corrosion resistance.
ITEM
DESCRIPTION
10509 CORNERBEAD CORNERITE
SIZE PER CTN PER PLT
3”X3”X8’
75
1125
38
VINYL LATH ACCESSORIES
CORNER BEAD
S TUC C O & PL AS TER LAT H PRODUCTS
Reinforces exterior corners with durable and straight corners.
ITEM
DESCRIPTION
MATERIAL
SIZE
PER CTN PER PLT
10515
CORNER BEAD
VINYL
2-1/2” X 10’
50
1250
EXPANSION JOINT
”M” type expansion providing mechanical keying to stucco
membrane. Ideal for one coat systems.
ITEM
10519
39
DESCRIPTION
EXPANSION JOINT
MATERIAL
SIZE
VINYL
1/2” X 10’
PER CTN
35
PER PLT
875
STUCCO & PLASTER PRODUCTS
VINYL LATH ACCESSORIES
CASING BEAD
Utilized to terminate stucco.
ITEM
DESCRIPTION
MATERIAL
SIZE
PER CTN PER PLT
10516
CASING BEAD
VINYL
1/2” X 10’
100
2500
STUCCO & PLASTER L ATH PROD UC TS
KAL-KORNER BEAD
Design Features: Formed of galvanized steel to protect
exterior corners with veneer plastering. Flange length 1-1/4”.
ITEM
10510
DESCRIPTION
KAL-KORNER BEAD
LENGTH
10’
PER CTN
60
PER PLT
1680
40
DRYWALL STUDS
Design Features: Roll-formed channel type non-bearing steel members used
extensively for interior partitions. Outer flanges are knurled to prevent screw
ride and to expedite attachment of gypsum wallboard. Studs are prepunched
24” O.C. to accomodate a snap in gromet for plumbing and electrical conduits.
*Custom Lengths Available
DETAILED INSTALLATION PAMPHLET AVAILABLE
ITEM
WEB WIDTH
LENGTH
15962
15968
15966
15978
15970
15972
15974
1-5/8”
2-1/2”
2-1/2”
3-5/8”
3-5/8”
3-5/8”
3-5/8”
10’
8’
10’
8’
10’
12’
14’
PER
BNDL
10
10
10
10
10
10
10
PER
PLT
240
240
240
180
180
180
180
METAL FRAM ING PRODUCTS
B
A
Section Properties
DIMENSIONS
(inches)
DESIGNATION
.0179 Design Thickness
1-5/8” DWS
2-1/2” DWS
3-5/8” DWS
6” DWS
41
25
25
25
25
A
1.625
2.500
3.625
6.000
MINOR AXIS
MAJOR AXIS
Area
Wt.
I x
Sx
rx
Iy
Sy
ry
RESISTING
MOMENT
B
(In. ) (Lb./Ft.)
(In. )
(In. )
(In.)
(In.4)
(In.3)
(In.)
(In./Lbs.)
1.25
1.25
1.25
1.25
0.08
0.10
0.12
0.16
0.038
0.100
0.235
0.783
0.047
0.080
0.129
0.261
0.68
1.01
1.41
2.19
0.016
0.018
0.020
0.023
0.019
0.021
0.022
0.023
0.441
0.432
0.415
0.376
931
1584
2554
5176
2
.300
.360
.440
.600
4
3
METAL FRAMING PRODUCTS
DRYWALL TRACK
Design Features: Track is used to anchor the partition at floor and
ceiling. Channel configuration formed with unhemmed legs sized to
receive the corresponding size stud.
Footnote: Studs available with or without pre-punched holes
ITEM
WEB WIDTH
LENGTH
17036
17038
17040
1-5/8”
2-1/2”
3-5/8”
10’
10’
10’
PER
BNDL
10
10
10
PER
PLT
240
240
180
Physical & Structural Properties
WT
(lb/ft)
A
(in2)
Ix
(in4)
Sx
(in3)
Mx
(in-k)
1-5/8”
2-1/2”
3-5/8”
0.230
0.286
0.358
0.068
0.084
0.105
0.024
0.065
0.162
0.022
0.043
0.078
0.419
0.820
1.311
METAL FRAM ING PR ODUC TS
WEB W
(in)
FURRING CHANNEL
Design Features: Section designed for screw alignment of finished
surface material in wall and ceiling furring.
ITEM
13194
DESCRIPTION
HIGH HAT FURRING CHANNEL
SIZE
PER BDL
7/8”X12’
10
PER PLT
500
42
CAN STOCK
Design Features: Can Stock is used to seal a return or supply framed
HVAC opening. Also provides a lip to support the filter.
Material: HT Galvanized Steel
Footnote: 10’ Lengths
ITEM
DESCRIPTION
HVAC TR IM & SHEET METAL PRODUCTS
10725
10719
CAN STOCK
CAN STOCK
MOBILE HOME SKIRTING
Design Features: Economical block embossed galvanized steel panels in
an easy to handle size. The panels may be attached to a simple frame for
mobile home skirting or utilized as a decorative wall covering.
ITEM
13174
43
DESCRIPTION MOBILE HOME SKIRTING R/FACE
SIZE
PER BDL
PER PLT
28”X60”
10
500
WSIZE H
4-7/8” CROWN
4-1/2”1-1/4F 1/2OH CL
GAUGE
HT
HT
CTN PER PLT
25
25
900
750
HVAC TRIM & SHEET METAL PRODUCTS
FLAT SHEETS
Design Features: Flat Sheet Metal available in various thicknesses and
widths. Both in Galvanized Steel & Aluminum for multiple uses of flashing
or “do it yourself projects.”
Material: Aluminum, Galvanized Steel, Zinc/Aluminum Coated
Footnote: Available Per Piece
ALUMINUM
ITEM
DESCRIPTION
ALUM.
SIZE
21492
20873
FLAT SHEET
FLAT SHEET
.024
.032
46.75”X10’
47.75”X10’
ZINC/ALUMINUM COATED
DESCRIPTION
GAUGE
SIZE
27722
16251
26641
16271
16342
16341
15049
26619
FLAT SHEET
FLAT SHEET
FLAT SHEET
FLAT SHEET
FLAT SHEET
FLAT SHEET
FLAT SHEET
FLAT SHEET
24
24
24
26
26
26
29
29
22”X10’
27.5”X10’
43”X10’
27.5”X10’
42”X10’
48”X10’
27.5”X10’
40.874”X10’
HVAC TRIM & SHEET M ETA L PR OD UC TS
ITEM
GALVANIZED
ITEM
26617
21571
26612
16287
16306
16308
16310
16303
16343
21139
16371
DESCRIPTION
GALV.
FLAT SHEET
FLAT SHEET
FLAT SHEET
FLAT SHEET
FLAT SHEET
FLAT SHEET
FLAT SHEET
FLAT SHEET
FLAT SHEET
FLAT SHEET
FLAT SHEET
.010
.012
.0125
26
26
26
26
26
26
28
29
SIZE
COLOR
35.75”X10’
47.75”X10’
36”X10’
WHITE
36”X4’
47.25”X10’
BLACK
47.25”X10’
BROWN
47.25”X10’
WHITE
48”X10’
48”X10’ BROWN/WHITE
35.75”X10’
40.88”X10’
44
ALUMINUM STORM PANELS
Design Features: Storm Panels protect window and door openings against hurricane
storm damage resulting from wind born debris.
• .063 Aluminum
• Miami Dade County
• Product Approval No. 01-0718.15
• Aluminum: lightweight for easy assembly
Material: .063 Aluminum, Miami-Dade county approval, Pallet quantities vary
Footnote: Available Per Piece
STORM PANEL PRODUCTS
TYPICAL .063 ALUMINUM PANEL
ITEM
16234
16235
16236
16237
16238 DESCRIPTION
W SIZE H QTY
ALUM. STORM PANEL
44”
50
ALUM. STORM PANEL
56”
50
ALUM. STORM PANEL
68”
50
ALUM STORM PANEL
86”
50
Special Length Panels Per Inch
ea
ALUMINUM PATIO
SILL/ STUDDED ANGLE 106”
ITEM 16199
Used to secure storm panels to walls for quick &
easy removal or where fasteners are required. To
be installed either up in the soffit framing or down
into the patio or driveway.
45
INDEX
Insulation Support Wire........................................37
Aluminum Plywood Clip.......................................37
J Bead.................................................................35
Aluminum Soffit-Strip..........................................21
KAL-Korner Bead.................................................40
Aluminum Storm Panels......................................45
Lap Siding Starter Strip.......................................18
Aluminum Under-Eave Louver..............................23
L Bead.................................................................36
Anchor Bolts & Washers......................................28
Mobile Home Skirting..........................................43
Angle Flashing.......................................................7
PBR & R Panel Metal Roofing Panels.....................3
Apron/Dormer Flashing........................................12
Pier Caps.............................................................29
Arched Corner Bead............................................34
Preformed Valley..................................................15
Bar Ties...............................................................29
Preformed Valley Hemmed...................................16
Bar Tie Tools........................................................30
Preformed Tile Valley 24” Open Angle..................16
Bullnose Corner Bead..........................................34
Rebar Safety Caps...............................................30
Can Stock............................................................43
Rebar..................................................................31
Casing Bead (Vinyl Lath Accessories)...................40
Residential Full Line Trims & Accessories..............2
Casing Bead (Lath Accessories)...........................38
Ridge Roll-Galvanized..........................................13
Cavity Caps.........................................................30
Rock-Lok...............................................................5
Code Approval/Description Page............................1
Rod Chairs...........................................................27
Commercial Full Line Trims & Accessories.............4
Roof Edge............................................................11
Vinyl Corner Bead................................................36
Sem-Lok Metal Roofing Panels..............................5
Corner Bead (Vinyl Lath Accessories)...................39
SM-Rib Metal Roofing Panels................................3
Cornerite Inside Corner (Lath Accessories)...........38
Soffit J Channel...................................................19
Corrugated Metal Roofing Panels...........................6
Soffit System.......................................................19
Dovetail Anchor...................................................33
Static Ventilators..................................................20
Drywall Studs......................................................41
Step Flashing.........................................................8
Drywall Track.......................................................42
Stucco Flashing...................................................12
Drywall Corner Bead............................................35
Termite Shield.....................................................32
Eave Drip-Galvanized Steel....................................9
Tie Wire...............................................................27
Eave Drip-Aluminum............................................10
Tin Caps..............................................................12
Expanded Corner Bead (Lath Accessories)...........38
Turbine Ventilators...............................................20
Expansion Joint (Vinyl Lath Accessories)..............39
Valley Rolled........................................................17
Fascia Trim..........................................................18
Venturi Vent.........................................................21
Flat Sheets..........................................................44
Verti-Lok Metal Roofing Panels..............................4
Foundation Vents.................................................23
V Formed Valley...................................................15
Furring Channel...................................................42
V Formed Valley Hemmed....................................15
Galvanized Bullnose Corner Bead........................36
Universal Ridge Vent Aluminum...........................22
Galvanized Plywood Clip......................................37
Wall Tie................................................................32
Galvanized Roof Jack..........................................26
Water Diverter.....................................................13
Galvanized Shanty Cap........................................26
Weather Vent.......................................................24
Gooseneck Vent...................................................25
Z Flashing............................................................14
INDEX
5V -Crimp Metal Roofing Panels............................2
H Molding............................................................19
46
I ND EX
NOTES
Southeastern Metals
Technical Support: (800) SE Specs (737 - 7327) • www.semetals.com
SALES: (800) 874-0335 • FAX (904) 696-2511
gibraltar1.com
(800) 777-0675
TOTAL QUALITY
Total control over every aspect of production
The industry standard for quality in every product line
Low return and callback records
SUPERIOR MANUFACTURING
& ENGINEERING
State-of-the-art manufacturing facilities
The most comprehensive product lines in the industry
Broad range of materials to match any need
Every product engineered for its application
Flexibility and custom manufacturing
SERVICE EXCELLENCE
On-time delivery is a given
Manufacturing expertise means short lead times
Integrated Customer Service Centers answer questions promptly
Complete network of trained factory representatives
SEMCO MISSION STATEMENT
“Forming the Future”
We are committed to providing quality products
at competitive prices delivered on time with
unsurpassed service.
We will accomplish this through an ongoing
committment to fostering integrity, dedication, responsibility
and pride among our team members.
Technical Support: (800) SE Specs (737 - 7327) • www.semetals.com
SALES: (800) 874-0335 • FAX (904) 696-2511
SOUTHEASTERN METALS LOCATIONS
JACKSONVILLE
11801 Industry Drive
•
Jacksonville, FL 33218
MIAMI
7265 NW 74th Street
•
Medley, FL 33166
LAKELAND
4950 S. Frontage Road
•
Lakeland, FL 33815
ATLANTA
3025 Sylvan Road
•
Hapeville, GA 30352
SOUTHEASTERN METALS
SALES: (800) 874-0335 • FAX (904) 696-2511

SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS

Transcription

Similar documents

Metal Roofing Beauty That Lasts!