Key Selector Switches (Wave-key Type)

ø16 A6/L6
Key Selector Switches (Wave-key Type)
Seven different keys available
Wave-keys are hard to duplicate
and provide increased security.
Installed with flush silhouette bezels
ø16
A6 Series Key Selector Switches (Wave-key Type)
Unibody 22mm deep, Light duty
•Seven different keys are available.
•Hard-to-duplicate wave-keys
•Gold-clad cross-bar contacts
•IP40 and IP65 (IEC60529)
•UL recognized, CSA certified,
EN compliant (EN60947-1, EN60947-5-1)
Specifications
Operating Temperature
Storage Temperature
Humidity
Contact Resistance
Insulation Resistance
Contact Ratings
−25 to +55℃ (no freezing)
−30 to +80℃
45 to 85% RH (no condensation)
50 mΩ maximum (initial value)
100 MΩ minimum (500V DC megger)
Between live part and ground:
2000V AC, 1 minute
Between terminals of different poles:
2000V AC, 1 minute
Between terminals of the same pole:
1000V AC, 1 minute
Operating extremes:
5 to 55 Hz, amplitude 0.75 mm
Damage limits: 5 to 55 Hz, amplitude 0.75 mm
2
Operating extremes: 200 m/s
Damage limits: 500 m/s2
250,000 operations minimum
100,000 operations minimum
(operating frequency 1200 operations/hour)
IP40, IP65 (IEC 60529)
Solder/tab terminal #110
Approx. 21g (AS6H-2KS2B)
Dielectric Strength
Vibration Resistance
Shock Resistance
Mechanical Life
Electrical Life
Degree of Protection
Terminal Style
Weight
Dimensions
Rated Insulation Voltage (Ui)
Rated Thermal Current (Ith)
Rated Operating Voltage (Ue)
Resistive Load
(AC-12)
AC
50/60Hz Inductive Load
Rated
(AC-15)
Operating
Resistive Load
Current (Ie)
(DC-12)
DC
Inductive Load
(DC-13)
Contact Material
250V
3A
12V
24V
110V
220V
—
—
1.0A
0.5A
—
—
0.7A
0.5A
1.0A
1.0A
0.2A
—
0.7A
0.7A
0.1A
—
Gold-clad silver
•Minimum applicable load (reference value): 5V AC/DC, 1 mA
Panel thickness 0.5 to 6
Gasket
2.5
Locking Ring
3
TOP
Anti-rotation Ring
Round/Square
C
C
SPDT
DPDT
22
0.6
10.2
�18
24
C
C
ø18
�18
24
18
NC
NO
DPDT
NC1
NC2
NO1
NO2
C1
C2
Mounting Hole Layout
•Round/Square
•Rectangular
ø16.2 +0.20
ø16.2 +0.2
0
18
(TOP)
Key No.: 3H to 6H
Note:
Determine mounting
centers to ensure easy
operation.
18
NC
Terminal Arrangement (Bottom View)
18
2
ø18
31.3
Key No.: 0H to 2H
NO
SPDT
1
8
Rectangular
Rectangular
18
NC
NO
Square
5
NC
NO
Round
5
Terminal Width 2.8×0.5t
24
All dimensions in mm.
A6 Series Key Selector Switches (Wave-key Type) ø16
A6 Series Key Selector Switches (Wave-key Type)
Shape
AS6o
Position
Bezel Style
M:Round
Q:Square
H:Rectangular
Key Retained at l
90°
2-position
Maintained
90°
2-position
Spring return from right
A
L
R
B
L
R
C
L
R
B
L
R
A
L
C
L
C
AS6o-21KS2PB
DPDT
AS6o-3KS2A
AS6o-3KS2PA
R
DPDT
AS6o-3KS2B
AS6o-3KS2PB
L
C
R
DPDT
AS6o-3KS2C
AS6o-3KS2PC
L
C
R
DPDT
AS6o-3KS2D
AS6o-3KS2PD
L
C
R
DPDT
AS6o-3KS2E
AS6o-3KS2PE
L
C
R
DPDT
AS6o-3KS2G
AS6o-3KS2PG
H
L
C
R
DPDT
AS6o-3KS2H
AS6o-3KS2PH
B
L
C
R
DPDT
AS6o-31KS2B
AS6o-31KS2PB
D
L
C
R
DPDT
AS6o-31KS2D
AS6o-31KS2PD
G
L
C
R
DPDT
AS6o-31KS2G
AS6o-31KS2PG
C
L
C
R
DPDT
AS6o-32KS2C
AS6o-32KS2PC
D
L
C
R
DPDT
AS6o-32KS2D
AS6o-32KS2PD
H
L
C
R
DPDT
AS6o-32KS2H
AS6o-32KS2PH
D
L
C
R
DPDT
AS6o-33KS2D
AS6o-33KS2PD
E
G
45°
3-position
Spring return from right
AS6H (Rectangular)
45°
3-position
Spring return from left
45°
3-position
Spring return two-way
AS6o-21KS1PB
AS6o-21KS2B
D
AS6Q (Square)
AS6o-21KS1B
DPDT
C
45°
3-position
Maintained
SPDT
Contact
R
B
AS6M (Round)
SPDT
DPDT
SPDT
DPDT
SPDT
DPDT
Package quantity: 1
Type No.
IP40
IP65
AS6o-2KS1A
AS6o-2KS1PA
AS6o-2KS2A
AS6o-2KS2PA
AS6o-2KS1B
AS6o-2KS1PB
AS6o-2KS2B
AS6o-2KS2PB
AS6o-2KS1C
AS6o-2KS1PC
AS6o-2KS2C
AS6o-2KS2PC
•Bezel style code: M (round), Q (square), H (rectangular)
•Key is retained in l positions and removable in  positions.
•Two keys are supplied.
•Besides the standard key (key number 0H), six other keys are also available.
To order other keys, specify the key number as shown below:
AS6M-2KS1PA-1H
(blank): Standard key (0H)
1H to 2H: Reversible key
3H to 6H: Non-reversible key
Contact Operation
Note:
Key number is indicated on the key cylinder.
Standard keys do not have a key number indication.
Key Operator Position and Contact Operation (Top View)
Position
Contact
L
90°
2-position
L
R
Maintained
Left
SPDT
R
45°
3-position
C
R
Manual
L
Spring return from right
C
R
Spring return
from right
L
C
R
Spring return
from left
Right
NO NC
—
C
C
DPDT
Left
Right
Contact Contact
NO NC NO NC
C
L
Center
NO NC
L
C
R
Spring return
two-way
DPDT
—
C
C
Left
Right
Contact Contact
NO NC NO NC
C
Left
Right
Contact Contact
NO NC NO NC
C
Left
Right
Contact Contact
NO NC NO NC
C
C
C
Left
Right
Contact Contact
NO NC NO NC
C
C
3
ø16
L6 Series Key Selector Switches (Wave-key Type)
Removable contact block allows
for single-board control panels
•Seven different keys are available.
•Hard-to-duplicate wave-keys
•Gold-clad or silver cross-bar contacts
•IP65 (IEC60529)
•UL recognized, CSA certified,
EN compliant (EN60947-1, EN60947-5-1, TÜV Rheinland)
Specifications
Operating Temperature
Storage Temperature
Humidity
Contact Resistance
Insulation Resistance
Electric Shock Protection
Dielectric Strength
Vibration Resistance
Shock Resistance
Mechanical Life
Electrical Life
Degree of Protection
Terminal Style
Weight
−25 to +55℃ (no freezing)
−30 to +80℃
45 to 85% RH (no condensation)
50 mΩ maximum (initial value)
100 MΩ minimum (500V DC megger)
Class II (IEC61140)
Between live part and ground:
2500V AC, 1 minute
Between terminals of different poles:
2500V AC, 1 minute
Between terminals of the same pole:
1000V AC, 1 minute
Operating extremes:
5 to 55 Hz, amplitude 0.5 mm
Damage limits: 5 to 55 Hz, amplitude 0.5 mm
2
Operating extremes: 100 m/s
Damage limits: 1000 m/s2
250,000 operations minimum
100,000 operations minimum
(operating frequency 1200 operations/hour)
IP65 (IEC 60529)
Solder/tab terminal #110, PC board terminal
Approx. 27g (LA3K-2SC6B)
Dimensions
Gasket
Contact Ratings
•Gold Contact (Switch base: Blue)
Rated Insulation Voltage (Ui)
Rated Thermal Current (Ith)
Rated Operating Voltage (Ue)
Rated Operating Current (Ie)
Contact Material
250V
3A
125V AC
0.1A
Gold-clad silver
30V DC
0.1A
Minimum applicable load (reference value): 5V AC/DC, 1 mA
•Silver Contact (Switch base: Gray)
Rated Insulation Voltage (Ui)
Rated Thermal Current (Ith)
Rated Operating Voltage (Ue)
Resistive Load (AC-12)
AC
Rated
50/60Hz Inductive Load (AC-15)
Operating
Resistive Load (DC-12)
Current (Ie)
DC
Inductive Load (DC-13)
Contact Material
250V
5A
30V
—
—
2A
1A
Silver
125V
3A
2A
0.4A
0.2A
250V
2A
1.5A
—
—
AC inductive load: PF = 0.6 to 0.7
DC inductive load: L/R = 7 ms maximum
Panel thickness 0.5 to 6
Locking Ring
1.45
6.8
LOCK
T OP
0.6
Round
Solder/Tab Terminal: Width 2.8×0.5t
C
LO
R15.5
Square
Rectangular
ø18
�18
24
ø18
�18
24
18
2-
10.5
36
13.5
10.2
31.3
Key No.: 0H to 2H
18
NC
NO
C
X1
NC
NO
X2
C
X2
2.6
K
ø21
9
C
15.8
1
LO
R15.5
Rectangular
R0
17.8
.6
1.2
6
NO
C
6
NC
NC
NO
X2
C
X2
ø21
15.8
X1
1
K
Round/Square
Anti-rotation Ring
Key No.: 3H to 6H
17.8
Terminal Arrangement (Bottom View)
Mounting Hole Layout
ø16.2 +0.2
0
NC2
NC1
NO2
NO1
C2
C1
Note:
Determine mounting centers
to ensure easy operation.
24
(TOP)
24
4
All dimensions in mm.
L6 Series Key Selector Switches (Wave-key Type) ø16
L6 Series Key Selector Switches (Wave-key Type)
Package quantity: 1
Shape
LAoK
Bezel Style
1: Round
2: Square
3: Rectangular
Position
Key Retained
at l
A
90°
2-position
Maintained
B
C
90°
2-position
Spring return
from right
LA1K (Round)
45°
3-position
Maintained
LA2K (Square)
45°
3-position
Spring return
from right
LA3K (Rectangular)
45°
3-position
Spring return
from left
45° 3-position
Spring return
two-way
B
L
R
Contact
Material
Gold
Silver
Gold
Silver
Gold
Silver
Gold
Silver
Gold
Silver
Gold
Silver
Gold
Silver
Gold
Silver
Gold
Silver
Gold
Silver
Gold
Silver
Gold
Silver
Gold
Silver
SPDT
DPDT
SPDT
DPDT
SPDT
DPDT
SPDT
DPDT
SPDT
DPDT
SPDT
DPDT
SPDT
DPDT
SPDT
DPDT
DPDT
DPDT
DPDT
DPDT
DPDT
DPDT
DPDT
DPDT
DPDT
DPDT
DPDT
DPDT
DPDT
DPDT
DPDT
DPDT
DPDT
DPDT
DPDT
DPDT
DPDT
DPDT
DPDT
DPDT
DPDT
DPDT
Silver
DPDT
Gold
Silver
L
R
Gold
Silver
L
R
Gold
Silver
L
R
Gold
Silver
A
L
C
B
L
C
C
L
C
R
D
L
C
R
E
L
C
R
G
L
C
R
H
L
C
R
B
L
C
R
D
L
C
R
G
L
C
R
C
L
C
R
D
L
C
R
H
L
C
R
D
L
C
R
R
R
Contact
Gold
DPDT
Type No.
Solder/Tab Terminal
PC Board Terminal
LAoK-2SC1A
LAoK-2SC1VA
LAoK-2SC2A
LAoK-2SC2VA
LAoK-2SC5A
−
LAoK-2SC6A
−
LAoK-2SC1B
LAoK-2SC1VB
LAoK-2SC2B
LAoK-2SC2VB
LAoK-2SC5B
−
LAoK-2SC6B
−
LAoK-2SC1C
LAoK-2SC1VC
LAoK-2SC2C
LAoK-2SC2VC
LAoK-2SC5C
−
LAoK-2SC6C
−
LAoK-21SC1B
LAoK-21SC1VB
LAoK-21SC2B
LAoK-21SC2VB
LAoK-21SC5B
−
LAoK-21SC6B
−
LAoK-3SC2A
LAoK-3SC2VA
LAoK-3SC6A
−
LAoK-3SC2B
LAoK-3SC2VB
LAoK-3SC6B
−
LAoK-3SC2C
LAoK-3SC2VC
LAoK-3SC6C
−
LAoK-3SC2D
LAoK-3SC2VD
LAoK-3SC6D
−
LAoK-3SC2E
LAoK-3SC2VE
LAoK-3SC6E
−
LAoK-3SC2G
LAoK-3SC2VG
LAoK-3SC6G
−
LAoK-3SC2H
LAoK-3SC2VH
LAoK-3SC6H
−
LAoK-31SC2B
LAoK-31SC2VB
LAoK-31SC6B
−
LAoK-31SC2D
LAoK-31SC2VD
LAoK-31SC6D
−
LAoK-31SC2G
LAoK-31SC2VG
LAoK-31SC6G
−
LAoK-32SC2C
LAoK-32SC2VC
LAoK-32SC6C
−
LAoK-32SC2D
LAoK-32SC2VD
LAoK-32SC6D
−
LAoK-32SC2H
LAoK-32SC2VH
LAoK-32SC6H
−
LAoK-33SC2D
LAoK-33SC6D
LAoK-33SC2VD
−
•Bezel style code: 1 (round), 2 (square), 3 (rectangular)
•Key is retained in l positions and removable in  positions.
•Two keys are supplied.
•L-shaped lever contact types are also available for collective mounting.
To order L-shaped lever contacts, specify “T” in place of “C” in the Type No.
(Straight lever contact)
(L-shaped lever contact)
LA1K-2SC1A
LA1K-2ST1A
Example:
•Besides the standard key (key number 0H), six other keys are also available.
To order other keys, specify the key number as shown below:
LA1K-2SC2VA-1H
(blank): Standard key (0H)
1H to 2H: Reversible key
3H to 6H: Non-reversible key
Note:
Key number is indicated on the key cylinder.
Standard keys do not have a key number indication.
5
ø16 A6/L6 Series Key Selector Switches (Wave-key Type)
L6 Series Key Selector Switches (Wave-key Type)
Contact Operation
Key Operator Position and Contact Operation (Top View)
Position
Contact
L
90°
2-position
L
R
Maintained Left
SPDT
R
L
45°
3-position
L
R
Maintained
Spring return
from right
C
R
C
L
Spring return
from right
L
R
Spring return
from left
Right
NO NC
—
C
C
DPDT
Left
Right
Contact Contact
NO NC NO NC
C
C
Center
NO NC
C
R
DPDT
Spring return
two-way
—
C
C
Left
Right
Contact Contact
NO NC NO NC
C
Left
Right
Contact Contact
NO NC NO NC
C
C
C
Left
Right
Contact Contact
NO NC NO NC
Left
Right
Contact Contact
NO NC NO NC
C
C
C
Collective Mounting
•The L6 series are available with L-shaped lever contact blocks which allow for collective mounting on 18-mm horizontal
centers (round and square types) or 24-mm horizontal centers (rectangular types).
Dimensions
Mounting Hole Layout
NC
NO
C
X1
NC
NO
C
NC
NO
X2
C
X2
X1
NC
NO
X2
X2
NO
C
NC
NO
C
NC
X2
X1
NC
NO
C
X2
X1
NC
X2
NO
18 (Round/Square)
24 (Rectangular)
9
C
13.5
36
18
2.6
9
X2
1.2
5.5
6
2
17.8
C
18
6
1
5 5
NC
NO
C
X1
NC
X2
NO
C
X2
17.8
15.8
18 (Round/Square)
24 (Rectangular)
ø16.0 +0.1
0
Tab Terminal
Width 2.8×0.5t
1
PC Board Terminal
Width 0.8×0.5t
LOCK
All dimensions in mm.
A6/L6 Series Key Selector Switches (Wave-key Type) Common Information
Accessories
Shape
Material
Type No.
Key
Ordering
Type No.
Package
Quantity
Metal
LA9Z-SK-o
LA9Z-SK-oPN02
2
Metal
(nickel-plated
brass)
MT-001
MT-001
1
Locking Ring Wrench
ø18.0
0
60.
Remarks
Specify a key number in place of o in the
Type No.
0H:
Standard key (reversible)
1H to 2H: Reversible key
3H to 6H: Non-reversible key
•Used to tighten the locking ring when installing an A6 or L6 control unit to a panel.
•Tighten the locking ring to a torque of 0.88
N·m maximum.
•For other accessories, see A6 and L6 control unit pages in the Industrial Automation Catalog A101.
6
A6/L6 Series Key Selector Switches (Wave-key Type) ø16
!
Safety Precautions
•Turn off the power to A6/L6 control units before installation,
removal, wiring, maintenance, and inspection. Failure to
turn power off may cause electrical shocks or fire hazard.
•For wiring, use wires of proper size to meet the voltage
and current requirements. Solder the wires correctly.
Improper soldering may cause overheating and create a
fire hazard. When using quick connect receptacles, use
applicable receptacles of the proper size.
Instructions
Key Selector Switches
Observe the following instructions to prevent malfunction or
damage.
•Insert the key to the bottom of the key hole.
•Do not attempt to remove the key from any key retained
position.
•Besides the standard key (key number 0H), six other key
numbers are available. Use a key of the matching number
with the key cylinder. The standard key does not have a
key number indication.
•Keys are available in two types.
Key numbers 0H (standard), 1H, and 2H are reversible
keys which can be inserted in two ways.
Key numbers 3H, 4H, 5H, and 6H are non-reversible keys.
Make sure of correct insertion direction.
Panel Mounting
•A6/L6 series
To install the A6/L6 unit to a panel cut-out, use the optional locking ring wrench (MT-001) and tighten the locking
ring to a torque of 0.88 N·m. Do not use pliers and do not
tighten the locking ring excessively, otherwise the locking
ring may be damaged.
•L6 series
Remove the operator from the contact block, insert the
operator into the panel cut-out from the front of the panel,
then attach the contact block.
To remove the contact block, turn the
locking lever in the direction opposite
to the arrow on the housing, and pull
out the operator from the contact
block.
To install the contact block, align the
TOP markings on the contact block
and the operator in the same direction, then lock the lever in the direction of the arrow.
Other Notes
•A6/L6 series
•Operating and storage environment
Make sure that the ambient temperature and humidity are
within the rated values.
•Do not use IP40 selector switches in places where the
switches are subject to oil and water splashes. In such
areas, use IP65 selector switches.
•Microswitch contacts
Do not connect NO and NC contacts of a microswitch to
different voltages or different power sources to prevent a
dead short-circuit.
•IP65 selector switches
IP65 selector switches are evaluated with conventional cutting and cooling oils, and cannot be used with some special oils. Contact IDEC for resistance against specific oils.
•L6 series
•Operating and storage environment
Make sure that the ambient temperature and humidity are
within the rated values.
•Connection
Positive lock connectors and easy-lock connectors can be
used on the tab terminals.
•Recommended connectors
Item
Terminal
Housing
Positive-lock Connector
(Tyco Electronics)
0.2 to 0.5 mm
2
2
0.5 to 1.25 mm
175412-1
174778-1
174779-1
Easy-lock Connector
(Nichifu Co., Ltd.)
0.2 to 0.3 mm2
OSS-62852F3
0.5 to 1.25 mm2 OSS-62815F3
NET1-28-1P
Note: Positive-lock is a registered trademark of Tyco Electronics.
•For other details about operating instructions,
see the A6 and L6 pages in the Industrial
Control & Automation Catalog A101.
Wiring
Solder the terminal at 350°C within 3 seconds using a 60W
soldering iron. Use lead-free Sn-Ag-Cu solder. Use a noncorrosive rosin flux.
When soldering, do not touch the switch housing with the
soldering iron. Also, ensure that no tensile force is applied
to the terminal. Do not bend the terminal or apply excessive
force to the terminal.
7
Flush Silhouette A6/L6 Series Accessories
Flush silhouette bezels for A6/L6 series miniature control units
protrude only 2 mm from the panel surface to provide stylish panel appearance.
Smaller protrusion reduces dust accumulation to increase cleanliness.
Bezel
Thickness
2 mm
Flush Silhouette Accessory
Flush Silhouette Accessory
Flush Silhouette Bezel
•A6/L6 series control units can be installed in the flush silhouette style.
•Available in metal bezel and black plastic bezel.
•Degree of protection depends on that of the control unit.
Metal Bezel
Round
Specification
Bezel:
Aluminum
Gasket:
Nitrile
Mounting Bracket:
Stainless steel
Type No.
Dimensions
• A6 Series
Panel thickness 0.5 to 5
Locking Ring
LA9Z-SM61
1
8
Black Plastic Bezel
Round
• L6 Series
Locking Ring
LA9Z-S71B
9
43
2
22.3
• Mounting Hole Layout
+
– 0 0.2
.1
Bezel:
Polyamide
Gasket:
Nitrile
Mounting Bracket:
Stainless steel
22.3
Panel thickness 0.5 to 5
LA9Z-S61B
0.
ø2
24
LA9Z-S81B
26.2 +0.2
– 0.1
�20.2 +0.2
– 0.1
2
Black Plastic Bezel
Rectangular
24
Black Plastic Bezel
Square
2
29
20.2 +0.2
– 0.1
Shape
Package quantity: 1
24
24
24
Types
30
All dimensions in mm.
Specifications and other descriptions in this catalog are subject to change without notice.
7-31,Nishi-Miyahara1-Chome, Yodogawa-ku,Osaka532-8550,Japan
Tel:+81-6-6398-2571,Fax:+81-6-6392-9731
E-mail: [email protected]
IDECCORPORATION (USA)
Tel:+1-408-747-0550/(800)262-IDEC(4332)
Fax:+1-408-744-9055/(800)635-6246
E-mail: [email protected]
IDECCANADA LIMITED
Tel:+1-905-890-8561, TollFree:(888)317-4332
Fax:+1-905-890-8562
E-mail: [email protected]
IDEC AUSTRALIA PTY. LTD.
www.idec.com
Tel:+61-3-9763-3244, TollFree:1800-68-4332
Fax:+61-3-9763-3255
E-mail: [email protected]
IDECELECTRONICSLIMITED
IDECIZUMI(H.K.)CO.,LTD.
IDECELEKTROTECHNIKGmbH
IDEC TAIWANCORPORATION
Tel:+44-1256-321000,Fax:+44-1256-327755
E-mail: [email protected]
Tel:+49-40-253054-0,Fax:+49-40-253054-24
E-mail: [email protected]
IDEC(SHANGHAI)CORPORATION
Tel:+86-21-5353-1000,Fax:+86-21-5353-1263
E-mail: [email protected]
IDEC(BEIJING)CORPORATION
Tel:+852-2803-8989,Fax:+852-2565-0171
E-mail: [email protected]
Tel:+886-2-2698-3929,Fax:+886-2-2698-3931
E-mail: [email protected]
IDECIZUMIASIA PTE. LTD.
Tel:+65-6746-1155,Fax:+65-6844-5995
E-mail: [email protected]
Tel:+86-10-6581-6131,Fax:+86-10-6581-5119
IDEC(SHENZHEN)CORPORATION
Tel:+86-755-8356-2977,Fax:+86-755-8356-2944
Cat.No.EP1275-0NOVEMBER2009PDF