tjm collection - Arshaan Business Corporation
Transcription
tjm collection - Arshaan Business Corporation
TJM COLLECTION ... a member of the group pg section tjm company profile tjm testing product list table of contents about tjm TJM PRODUCTS head office & factory Hello and thank you for choosing TJM Serious 4WD Equipment. TJM Products Pty Ltd began operation in QLD in 1973. The three founders; Lloyd Taylor, Cliff Jones and Steve Mollenhauer came together and pooled their ideas and passion to form a manufacturing business with one goal in mind; to build quality engineered 4WD Equipment. Today, we continue to engineer and manufacture 4WD products with the same philosophy as our founders. As a result, we are one of the world’s leading design, manufacturering and distribution companies for serious 4WD equipment. TJM manufactures an extensive range of vehicle frontal protection systems (bull bars), side and rear protection bars, sports bars, roof racks, side steps, tyre carriers, and canopies. Our accessory range includes recovery equipment, winches, suspension, wheel arch flares, snorkels, air operated differential locks and other lines built to TJM design specifications. TJM Canopies, TJM XGS Suspension, TJM Pro Locker, TJM OX Recovery Equipment and TJM Airtec Snorkels are among our range of branded products. Our 4WD accessory range is distributed and serviced throughout an Australia Wide Network of over 50 outlets, offering after sales backup and service that is second to none. Internationally, we supply to over 40 countries, spanning every continent. Our broad range of appeal has seen us as successful in supplying to the Original Equipment Market both here and overseas, including Nissan, Mazda, Mitsubishi, GMH and Ford, as well as State/Local Governments and commercial fleet operations. In 1999, CMI Limited, a proud Australian company with its head tjm company profile office located in Brisbane, acquired TJM Products. CMI is a diverse public company listed on the Australian Stock Exchange, and has a vast developmental and manufacturing network in Australia and around the world. For more information on CMI, please visit www. cmilimited.com.au Striving to maintain a quality assured product, we are certified to QS9000 and the International Standard ISO9001 and Environmental Standards. TJM is renowned for consistent innovation in design of practical and visually appealing equipment. The stylish look, quality, value and legendary fit of our products have made TJM the 4WD accessory of choice. We have been relentless in our pursuit of excellence in product innovation and leading edge technology in design, testing and manufacturing to ensure TJM continues to be at the forefront of the market. This pursuit is continually driven by consumer demand and feedback. Our vehicle frontal protection system range is constantly expanding as new 4WD vehicles enter the market. By choosing to purchase your 4WD accessories from TJM, you have invested in over 30 years of experience, dedication and reliability. Your choice will give you peace of mind to take on the world’s vast landscapes. We are proud that you have chosen to review our products in the hope they will accompany you on your 4WDing experience. sample tjm is committed to safety EXECUTIVE SUMMARY FOR THE TOYOTA LANDCRUISER 100 SERIES 02+ COIL TJM T13 STEEL FRONTAL PROTECTION BAR +3/4 SIDE BARS AND SIDE STEPS TJM T17 STEEL FRONTAL PROTECTION BAR p/n 070SO13N81Z, 073SO17N81Z (STEEL BARS) p/n 780SO4SS81Z (3/4 SIDE BARS AND SIDE STEPS) It can be concluded that as a result of the crash testing (for ADR69 type collisions) witnessed by my that the installation of the TJM bar does not detrimental effect the normal operation of the airbag triggering system on the vehicle. A report on this test is held by TJM Products Pty Ltd. As the exact airbag triggering algorithm was not available for this particular vehicle model at the time of testing, it would be reasonable to assum that this SRS (Supplementary Restraining System) airbag triggering system has one of the KNOWN sensing devices, which does not activae the airbag below a certain “g” deceleration (given in the report) during greater than 2 milliseconds duration. The bar tested, did not have a maximum crumpling rate in excess of this “g” deceleration during greater than 2ms duration when dynamically tested and therefore is suitable for installation on the airbag equipped vehicle described above. NOTE: Toyota Landcruiser 100 Series 02+ Coil TJM T13 steel frontal protection bar with 3/4 side bars and side steps is comparable design to Toyota Landcruiser 100 Series 02+ IFS TJM T13 steel frontal protection bar with 3/4 side bars and side steps (Test No 1064, Test Date 15.12.04). tjm testing TJM product list - frontal protection bars TYPE 1 ALLOY frontal protection bar The classic styling of a TJM T1 Bar is perfect for many of today’s sophisticated vehicle designs. This Air Bag compatible bar has a high polish finish one piece extruded channel and is designed to replace the original bumper and will always look great. • Made from high grade aluminium • Fully welded construction • Includes driving light mounting points • Inludes ADR approved indicators • Accomodates fog lights TYPE 3 ALLOY frontal protection bar The sleek design of this alloy bar has unique appeal. Replacing the original bumper the Air Bag T3 frontal protection bar offers increased protection. Driving light mounting points are also a feature along with polyurethane bumperettes. O.E fog lights fit where applicable. • Winch Compatible • Custom designed for each vehicle • Polyurethane bumperettes • Mirror finish TYPE 5 ALLOY frontal protection bar TJM Type 5 bars are able to take small to medium size driving lights. The T5 has a 64mm center tube with 45mm outer loops to protect the headlights from flying debris or animal strike. TYPE 11 ALLOY frontal protection bar The TJM Type 11 Bars are a stylish and functional protection bar designed with a full width, one piece channel that fits over the original bumper. They are designed for increased protection to the bumper and grille of the vehicle, while still being light. • Accept driving lights TYPE 13 STEEL frontal protection bar A traditional no nonsense bar designed for the serious off road or agricultural user. The Type 13 Bar has been extensively tested in the harsh Australian Outback. • T-Slots for recovery jack • Winch compatible • Accomodates HF Aerial • Accomodates Driving lights next frontal protection bars con’t TJM frontal protection bars con’t TYPE 15 FLEET frontal protection bar Style, versatility and solid steel construction, the TJM T15 Protection Bar has it all. Featuring a replacement channel for improved approach and departure angles and: • Engineered to suit most low mount winches • Accomodates driving lights & aerials • Blasted, zinc treated and polyester powdercoated • Side bars won’t affect Air Bag compatibility TYPE 15 ALLOY frontal protection bar The astute purchaser will not go past the stylish, rugged, versatile, no compromise TJM T15 Frontal Protection Bar; it has it all. Replacement channel for improved approach and departure angles. Large diameter raised centre section to accommodate driving lights and engineered for installation of most low mount winches. • Light weight • Polyurethane bumperettes • Polycarbonate indicators • Seamlessly fits vehicle TYPE 15 STEEL frontal protection bar The Type 15 Steel Bull Bar has all of the features of its alloy counterpart, with the added strength that only steel can offer. TYPE 16 STAINLESS STEEL grille guard The stylish and sporty TJM T16 Frontal Protection Grille Guard is manufactured from 76mm diameter tube, is highly polished and fits neatly over the existing front bumper. It comes in two variations, either High or Low loop designs. It also includes provision for mounting driving lights. TYPE 16 ALLOY grille guard The traditional TJM T16 Alloy Frontal Protection Grille Guard is manufactured from high quality tube, is highly polished and fits neatly over the existing front bumper. Also comes in two designs, either High or Low loop. Again this bar also includes provision for mounting driving lights. next frontal protection bars con’t TJM frontal protection bars con’t TYPE 17 STEEL frontal protection bar The TJM Type 17 Bull Bar is all about functionality. The bag offers an exceptional approach angle, is winch compatible and can take a recovery jack using TJM’s unique T-Slots. A steering box guard is and two Bowshackle mounting points are standard on this particular version. TYPE 17 ALLOY frontal protection bar The Type 17 Alloy Bull Bar is made as a full featured lightweight alternative to its steel counterpart. • Excellent approach angle • Polycarbonate Indicator lenses • Winch frame as standard • Accomodates large driving lights TJM o/e nudge bars TJM ORIGINAL EQUIPMENT nudge bar for nissan x-trail next rear bars TJM rear bars TJM RB6 rear protection bar TJM Steel Tube Wrap Around Rear Bars, constructed in 50mm tube, are designed to provide additional protection to pick-ups. Featuring a useful tread plate step these rear bars also incorporate a class 4 heavy duty towbar certified to ADR62. Each bar is sand blasted, then pretreated with a zinc phosphate to prevent rusting and then polyester powder coated in black. TJM RB8 rear protection bar Add style, protection and improved departure angle to the rear of the vehicle with a TJM Replacement Rear Bar, designed to fit with most popular Class 4 towbars. Constructed from steel plate, the TJM Replacement Rear Bars are finished in black powder-coat, or as an option, painted to match the vehicle. The tread plate step on top of the bumper makes for easy access to the rear of the vehicle or roof rack. ADR, DOT and ECE approved stop, tail and turn signal lights with wiring looms are supplied. TJM STAINLESS STEEL rear protection bar This Stainless Steel rear protection bar is a good looking accessory that provides a useful step and will stop the vehicle being damaged by minor bumps. Made from high grade Stainless Steel, you won’t have to worry about corrosion or regularly polishing this piece to keep it looking great. next side steps TJM side steps TJM OUTBACK sidesteps TJM Outback Side Steps are the ‘Premium’ Side Step in the TJM range. While they offer the ultimate in style they also still offer heavy duty protection to vehicle body panels and sills. The Outback Side Steps are mounted directly to the chassis with TJM’s unique mounting system. Manufactured from 50mm Steel tube, they are further enhanced with a Stainless Steel Step Tread. TJM STYLEMASTER alloy steps TJM Stylemaster Side Steps are manufactured in bright anodised aluminium extrusion to suit most 4WD’s. Special features of the TJM Stylemaster Side Steps include non-slip tread and moulded end caps. The TJM Stylemaster Side Steps are attached to the vehicle sub-frame with black polyester powdercoated steel mounts. TJM CLASSIQUE alloy steps TJM’s Classique step range offers a custom aluminium extrusion with greater grip and plastic step treads as standard. This good looking step also has plastic end caps and a solid mounting system. TJM SPORTZMASTER sidesteps • Stainless Steel tube • Easy access to vehicle • Powder coated pressed steel mounting brackets • Sill Protection • Mirror finish • Step tread TJM STAINLESS STEEL tube step • Stainless Steel tube • Vehicle specific design • Sill protection next sports bars • Mirror finish • Low Maintenance • Solid mounting system TJM sports bars TJM STAINLESS STEEL sports bar As well as adding sports appeal to any vehicle, the large 76mm diameter, Stainless Steel TJM Sports Bars provide optional mounting locations for off-road lights or communication aerials on some models. TJM ALLOY sports bar Aluminium Sports Bars are made from 76mm alloy tube and polished to give a mirror like finish. Sports bars can be used to protect the rear of the car from cargo. TJM dual battery systems TJM DBS dual battery system TJM DBS DUAL BATTERY SYSTEM • Under body mounted • Auto Disconnect Function • Installation Kit Included • LED Status Display • 180amp Nagares Relay • Swiss Made Quality & • Manual Over-ride Switch • Spike Protection • Starts on Main Battery • Maintenance Free Technology TJM IBS dual battery system TJM IBS DUAL BATTERY SYSTEM • Cabin Mounted Control Unit • Manual Over-ride Switch • Maintenance Free • 2 Voltage Indicators • Starts On Main Battery • Swiss Made Quality & • Manual Over-ride Switch • 180amp Nagares Relay • Auto Disconnect Function • Spike Protection next suspension Technology TJM suspension TJM XGS shock absorbers TJM XGS 4WD Suspension have of kits available for most 4WD’s, to meet specific needs. Towing, load carrying and ground clearance can all be imporved while still retaining ride quality. Choose from standard height, raised or extra heavy duty Hi-Lift kits with TJM XGS Gas Charged and X-panded Gas Charged Shock Absorbers. TJM XGS leaf springs Original leaf springs are considered by some to be harsh riding, and often sag with age or when under constant load. TJM XGS 4WD Suspension resolves these problems with heavy duty springs of multi-leaf design. Australian made, using high grade steel, each spring is prestressed to eliminate the possibility of sagging. TJM XGS Springs are available in either medium or heavy duty load carrying capacities. TJM XGS components U-Bolts - Made from quality carbon steel with a rolled thread to increase strength. Shackles - Stronger than original equipment and greasable for easy servicing. • Case hardened and gold cadmium plated for corrosion protection. • Made from high grade steel. TJM XGS torsion bars TJM TORSION BARS - Are available to improve the vehicles load carrying ability and stability. Increased spring rate ensures ride height is maintained, especially when the vehicle is fitted with load bearing accessories. STEERING DAMPER - For superior steering and shimmy control, fit a TJM XGS 35mm big bore steering damper. TJM XGS polyurethane bushes TJM POLY BUSH KITS - Manufactured from resilient high grade polyurethane, these bushes are designed to reduce suspension noise, vibration and harshness. next suspension con’t TJM suspension con’t TJM POLYAIR bags & bellows Coupled with TJM XGS springs and shock absorbers, the Polyair Spring further assists in solving suspension problems and greatly improves handling, ride height and stability of your vehicle. A pressure increase of between 5 to 25psi (Polyair) and 5 to 100psi (Bellows) will give a load increase of between 10 to 60%. TJM canopies TJM CANOPIES fibreglass Quality, reliability, performance - a few of the things you must have in a canopy. A TJM Canopy delivers - and then some. On the job, or away on a trip, TJM Canopies will take the harshest of conditions in their stride. Not only are TJM Canopies tough and durable, they combine practical design and style along with a host of features you’ve always wanted in a vehicle canopy. TJM Canopies are 100% Australian made by TJM Products, a world leader in the design and manufacture of four wheel drive and commercial vehicle equipment. All TJM Canopies are crafted from hand-laid fibreglass. It’s a process that provides a high quality and consistent thickness and finish as well as adding strength and durability. The heavy duty aluminium hardware, designed and manufactured by TJM specifically to withstand rugged Australian conditions, means the canopy always rides and feels like it’s built on, not bolted on. Rain or shine, a TJM Canopy protects your gear and makes life easier, wherever you travel. With TJM you get to choose from the widest range of canopy designs, options and accessories. NATIONWIDE SERVICE AND WARRANTY A wide network of authorised stockists and fitting centres offer expert advice on a TJM Canopy to best suit your vehicle and your requirements. All TJM Canopies carry a comprehensive Nationwide Warranty, and being Australian Made, TJM can offer prompt availability of all spare parts and service. TJM Canopies are built to perform. Whether on the job, away for the weekend or around Australia, a TJM Canopy on your vehicle will handle it all. STANDARD FEATURES: • • • • • • Hand-laid fibreglass shell Lockable tinted rear tailgate Australian Made Parts/spares are readily available Quality Assured to ISO9001 Concealed load board design (where applicable) OPTIONS INCLUDE: • Side Access Windows • XL Side Access Doors • XL Sliding Side Access Doors • Front Fold Down Window Security Mesh • Security Mesh • Interior Roof Lining • Air Vents • Rear Brake Light • Medium Duty Carry Racks • Paint Colour Coding TJM CANOPIES fibreglass For most 2WD and 4WD Factory Body or Drop Side Tray Pickups, the TJM Canopy in high or low roof style includes a front panel with a drop down window separating the canopy from the cab of the vehicle. next canopies con’t TJM canopies con’t TJM CANOPIES load board concealled, removed or retained Some vehicles are equipped as standard with a “Load Board”. When purchasing a canopy you have the choice of removing or retaining the “Load Board”. Specify your preference when ordering the canopy. TJM CANOPIES side access windows The TJM Side Access Window is supplied with unique twin ‘Push Lock’ system and Gas Stays. Push Lock - TJM Australian Made Side Access Windows are fitted with a unique flat design ‘Push Lock’ system. TJM CANOPIES xl side access windows The TJM heavy duty XL Side Access Doors provide an extra large opening and also feature lockable flush “T” Handles and Gas Stays. TJM CANOPIES pop-up & rotating style air vent The installation of Air Vents assists the circulation of fresh air throughout the interior of the canopy. Two types are available, the “Pop-up Style” (left) and the “Rotating Style” (right). TJM CANOPIES interior roof lining The optional TJM fabric Interior Roof Lining provides added comfort and improved presentation with a high quality “automotive finish”. next canopies con’t TJM canopies con’t TJM CANOPIES brake light An ADR approved, LED, centre high mounted brake light is also available as an option on most TJM Canopies. Anti-Abrasive Tape - Over a period of time movement between the canopy rear door and the vehicle tailgate may cause the tailgate paint to rub. Prevent this from occuring with TJM’s 30mm wide clear Anti-Abrasive Tape. TJM CANOPIES roof racks TJM medium duty carry racks comply to australian standard 1235/1991, and are uniquely designed by tjm for installation to the tjm canopy. (available for some models only) TJM pro locker TJM PRO LOCKER air locking differential The TJM Pro Locker is an air-operated differential lock that, when fitted and engaged using compressed air, allows you to have equal drive to both wheels. Pro Locker works by engaging a locking ring over one axle gear which locks the gear to the carrier and immobilizes the differential pinion gears, giving you equal drive to both wheels, allowing you to tackle the toughest terrain. A FEW ADVANTAGES OF USING THE TJM PRO LOCKER ARE: 1. Unique air operated piston style actuator aims to eliminate the risk of oil being pumped up the airline. 2. Hardened thrust washers and the size of the locking ring make Pro Locker extremely strong in operation. 3. Stronger materials and a thicker carrier compared to most standard differentials. 4. Larger pinion gears compared to most standard differential. 5. No carrier modification needed other than the drilling and tapping of a bulkhead fitting port. 6. Pre tensioned 10mm bolts hold hemisphere together. 7. Robust design, carefree maintenance. 8. Reinforced rubber external hose extension is supplied as standard to minimize the risk of the airline being damaged by debris. 9. Recessed coloured L.E.D cabin switches show clearly when TJM Pro Locker is on or off. 10. Patented design that has been used and proven in the field for over 20 years. 11. Heavy Duty Wire Harness. next recovery equipment TJM recovery equipment TJM OX electric winches TJM has a range of electric winches to suit almost any need. The electric winch range can easily be fitted into any winch compatible bar and feature a positive braking mechanism to prevent the winch from allowing a vehicle to slide back down a hill when the user is not engaging the winch. TJM OX hydraulic winches The power and strength of the OX Hydraulic Winch is harnessed through the vehicle’s hydraulic system. The unique solenoid valve overides the winching function should a change in steering direction be required. The hydraulic system allows the winch to operate for extended periods under load, providing constant and smooth recovery power. The patented two-speed OX winch allows for fast rope retrieval on one-speed while the other speed provides strong recovery capacity. TJM compressors TJM’s range of air compressors aim to give the user a choice between a budget compressor and a premium compressor. All TJM compressors come with an extensive warranty and are bundled with a accessories as standard. TJM recover y winches TJMs new hand winch is a great accessory for any adventurer to have whether it be your primary or backup winch. Capable of 2500kg pull & 1600 kg lift, this strong and durable accessory will help you to get out of sticky situations. The winch comes with 20 meters of spooled cable with a quick-fit clevis hook to attach to the vehicle. • Spare sheer pins inside handle • One easy to use lock/unlock lever • Cable is coiled inside drum - easier to put away • Easy to remove pin allows quick connection to anchor point next snorkels TJM snorkels TJM AIRTEC snorkels E V E RY 4 W D S H O U L D E N J O Y T H E T J M A I RT E C A D VA N TA G E 1. Fitting a TJM Airtec Snorkel means the air supply is drawn from roof level providing cooler and cleaner air to the engine. 2. Because the air supply is drawn from roof level, dust is not as thick and plentiful as in the engine bay or inner guard. This will help extend the life of the air cleaner element, therefore reducing the wear of vital components. 3. With the positively sealed TJM Airtec Snorkel, well above water level, you can expect worry-free water crossings. 4. When driving along the open road, the TJM Airtec Snorkel creates what’s known as a ram air effect, that has often been found to increase engine performance. Upper Snorkel Bracket Snorkel Air Ram Original Air Cleaner Assembly Tube Clamp Airtec Snorkel Body T J M A I RT E C S N O R K E L F E AT U R E S • Airtec’s intake design separates rain or moisture from the air stream before it enters the engine. • The snorkel body is manufactured with a smooth inner wall allowing uninterrupted air flow to assist engine performance. • Moulded from high quality UV-resistant polyethylene for maximum strength and rigidity and incorporating stainless steel hardware. air t ec • A wide range fits most popular 4WD makes and models. • Easy installation minimising modifications to vehicle’s original components. Intermediate Snorkel Tube • Designed exclusively for TJM and supplied through the TJM Australia-wide and international sales and service network. TJM front underbody guards TJM FUG front underbody guard TJMs range of F.U.G’s are made from steel which is pre-treated in zinc phosphate to prevent rusting then powdercoated in black. Care is taken to ensure the steel plate is bent and mounted in the right manner to make it as strong as possible. When a vehicle is regularly taken off-road it is very important to protect the underside of your vehicle to ensure that logs, rocks and other hard objects do not cause serious damage.
Similar documents
PART NO: TJMROV001
dual battery system TJM IBS DUAL BATTERY SYSTEM • Cabin Mounted Control Unit
More information