Capacitor Ordering Information Guide

Transcription

Capacitor Ordering Information Guide
KEMET makes it possible.
Electronic Components
Why Choose KEMET
KEMET Electronics Corporation is a leading global supplier of
electronic components. We offer our customers the broadest
selection of capacitor technologies in the industry, along
with an expanding range of electromechanical devices,
electromagnetic compatibility solutions and supercapacitors.
Our vision is to be the preferred supplier of electronic
component solutions for customers demanding the highest
standards of quality, delivery and service.
TABLE OF CONTENTS
Aluminum Capacitors
Axial Leads...................................................................................................................................................... 9
Radial Crown................................................................................................................................................. 10
Screw Terminal...............................................................................................................................................11
Snap-In.......................................................................................................................................................... 13
Solder Pin/Tag............................................................................................................................................... 16
Single-Ended................................................................................................................................................. 16
Surface Mount............................................................................................................................................... 18
Motor Start..................................................................................................................................................... 20
Ceramic Capacitors
Surface Mount............................................................................................................................................... 23
Commercial Grade.................................................................................................................................. 23
Flex Mitigation......................................................................................................................................... 25
Automotive Grade.................................................................................................................................... 28
High Reliability Commercial Off-The-Shelf (COTS) ................................................................................ 33
SnPb End Metallization........................................................................................................................... 34
Bulk Capacitance.................................................................................................................................... 37
High Temperature.................................................................................................................................... 38
High Voltage............................................................................................................................................ 40
Aerospace & Defense.............................................................................................................................. 43
RF & Microwave...................................................................................................................................... 45
Through-Hole................................................................................................................................................. 46
High Temperature.................................................................................................................................... 48
High Voltage.............................................................................................................................................51
Aerospace & Defense.............................................................................................................................. 52
Disc................................................................................................................................................................ 55
Safety...................................................................................................................................................... 55
Film Capacitors
Through-Hole................................................................................................................................................. 61
General Purpose..................................................................................................................................... 61
Metallized Polyester ......................................................................................................................... 61
Metallized Paper & Polyphenylene Sulfide........................................................................................ 63
Pulse & AC.............................................................................................................................................. 64
Single Metallized Polypropylene....................................................................................................... 64
Double Metallized Polypropylene...................................................................................................... 66
Film/Foil Polypropylene..................................................................................................................... 66
Safety/EMI............................................................................................................................................... 67
X1 Class............................................................................................................................................ 67
X2 Class........................................................................................................................................... 70
Y1 Class............................................................................................................................................ 73
Y2 Class............................................................................................................................................74
Multiple X & Y................................................................................................................................... 76
Film Capacitors (cont.)
Surface Mount .............................................................................................................................................. 78
Polyester (PET)....................................................................................................................................... 78
Polyethylene Naphthalate (PEN)............................................................................................................. 79
Metallized Polyphenylene Sulfide (PPS).................................................................................................. 81
Y2 Class.................................................................................................................................................. 82
Power & Application Optimized...................................................................................................................... 83
Power Film............................................................................................................................................... 83
Axial.................................................................................................................................................. 83
Radial................................................................................................................................................ 84
Screw/Faston Terminal..................................................................................................................... 85
Motor Run Applications........................................................................................................................... 87
Screw/Faston Terminal..................................................................................................................... 87
High Voltage Transient Suppression........................................................................................................ 88
Radial................................................................................................................................................ 88
Low Voltage Transient Suppression........................................................................................................ 90
Radial................................................................................................................................................ 90
Capacitive AC Power Supply................................................................................................................... 91
Radial................................................................................................................................................ 91
Supercapacitors
Small Cell....................................................................................................................................................... 95
Radial...................................................................................................................................................... 95
Surface Mount......................................................................................................................................... 96
Large Cell...................................................................................................................................................... 97
Snap-In.................................................................................................................................................... 97
Screw Terminal........................................................................................................................................ 97
Bank Module........................................................................................................................................... 97
Tantalum Capacitors
Surface Mount............................................................................................................................................... 99
Standard Tantalum.................................................................................................................................. 99
Polymer Tantalum KEMET Organic Capacitor (KO-CAP)......................................................................101
Polymer Aluminum Organic Capacitor (AO-CAP).................................................................................. 104
High Temperature.................................................................................................................................. 104
High Reliability Commercial Off-The-Shelf (COTS)............................................................................... 105
MIL–PRF CWR Style............................................................................................................................. 109
Fused.....................................................................................................................................................112
Automotive Grade...................................................................................................................................112
Space Grade..........................................................................................................................................114
Through-Hole................................................................................................................................................116
Hermetically Sealed Axial.......................................................................................................................116
Radial Dipped.........................................................................................................................................123
Molded Axial...........................................................................................................................................125
Molded Radial........................................................................................................................................125
Aluminum Capacitors
ALUMINUM CAPACITORS
Axial Leads
Radial Crown
Screw Terminal
Snap-In
Solder Pin/Tab
Single-Ended
Surface Mount
Motor Start
PEG124
Very Long Life
105°C & 125°C
10 – 450 VDC
PEH126
High Ripple Current
150°C
25 – 63 VDC
ALS30/31
High CV Value & Long Life
85°C
25 – 500 VDC
ALC10
Long Life
85°C
35 – 550 VDC
ALP/T 20/21
Low ESR
85°C
40 – 450 VDC
ESK
General Purpose
85°C
6.3 – 450 VDC
A700
Polymer Aluminum
125°C
2 – 16 VDC
MS/MD
60°C / 70°C
120 – 300 VAC
PEG126
High Ripple Current
150°C
25 – 63 VDC
PEH220
High Ripple Current
150°C
25 – 63 VDC
ALS32/33
High CV Value & Long Life
85°C
350 – 500 VDC
ALC10S
Slit Foil Audio
85°C
50 – 100 VDC
ALP/T 22/23
High Ripple
85°C
40 – 450 VDC
ESH
High CV
105°C
6.3 – 500 VDC
EDH
Gerneral Purpose
105°C
6.3 – 100 VDC
PEG127
High Ripple Current
150°C
25 – 63 VDC
PEH225
High Ripple Current
125°C & 150°C
25 – 63 VDC
ALS36/37
High Ripple Current
85°C
25 – 500 VDC
ALC40
High Ripple Current
105°C
25 – 500 VDC
ALN20S
T-Network
85°C
50 & 100 VDC
ESC
Low ESR
105°C
6.3 – 100 VDC
EDK
General Purpose
85°C
4 – 450 VDC
PEG130
Very Long Life
105°C
25 – 63 VDC
PEH226
High Ripple Current
150°C
25 – 63 VDC
ALS40/41
High CV Value
105°C
25 – 500 VDC
PEH506
Low ESR & ESL
85°C
35 – 450 VDC
ESG
High Ripple Current
105°C
160 – 450 VDC
EEV
Ultra-Low Impedance
105°C
6.3 – 50 VDC
PEG220
Very High Ripple Current
150°C
25 – 63 VDC
ALS42/43
High CV Value
105°C
350 – 450 VDC
PEH526
Automotive
125°C
25 – 80 VDC
ESY
Low Impedance
105°C
6.3 – 100 VDC
EXV
Ultra-Low Impedance
105°C
6.3 – 50 VDC
PEG225
ALS60/61
High CV Value
85°C
550 VDC
PEH532
Low ESR & ESL
105°C
35 – 450 VDC
ESW
Low Impedance
105°C
6.3 – 100 VDC
PEH169
Low ESR
85°C
10 – 450 VDC
PEH534
Low ESR & ESL
105°C
35 – 450 VDC
EST
Long Life
105°C
6.3 – 63 VDC
PEH169
Low ESR & ESL
105°C
10 – 350 VDC
PEH536
Low ESR & ESL
105°C
35 – 450 VDC
EAK
Long Life
125°C
10 – 63 VDC
PEH200
High CV Value
85°C
25 – 500 VDC
ELH
Low Impedance
85°C
6.3 – 450 VDC
PEH205
High Ripple
125°C
16 – 100 VDC
ELG
General Purpose
105°C
6.3 – 450 VDC
Extremely High Ripple Current
125°C & 150°C
25 – 63 VDC
PEG226
Extremely High Ripple Current
150°C
25 – 63 VDC
8
•and
Outstanding
performance
high
qualityelectrical
rubber
gasket.
Low ESR is the result of a low
Axial
Aluminum
Electrolytic
Capacitors
resistive electrolyte/paper system and an all-welded design.
Thanks to its mechanical robustness, the PEG126 is suitable
for use in mobile and aircraft installations with operation up to
+150°C.
PEG127 Series, +150ºC
Aluminum Capacitors
Overview
Applications
KEMET's PEG127 is an electrolytic capacitor with outstanding
KEMET's PEG127 is a high performance axial electrolytic
electrical performance. The device has a polarized all-welded
capacitor. It is designed for automotive applications with
design, tinned copper wire leads, a negative pole connected to
high demands on resistance to vibrations and high ambient
PEG124 Series Very Long
Life
& 125°C, 10 – 450 VDC
Benefi
tsand105°C
the case,
plastic
insulation. The PEG127 winding is housed
Part
Number
System
temperature.
Capacitance Range: 1 to 4,700
µF • Temperature
Range:
−40°C
to aluminum
+105°C and
−40°C to +125°C • Lifetime: 27,500 Hours
in a cylindrical
aluminum can
with a high
purity
lid and
• 2,000 hours at +150°C (D20 Case Size)
highPEG124
quality
rubberElectrolytic
gasket, as well as high temperature
capability
Axial
Aluminum
F
410
0
Q
T1
• Resistance
to vibrations E Capacitors
in small case sizes. The PEG127 has 1,600 hours operational life
Capacitance
• Resistance
to high ambient
temperature Size Code
Packaging
Series
Capacitance Code (µF)
Version
at +150°C
for all caseVoltage
sizes.(VDC)
Tolerance
• Low ESR
E= 10
P = 100
See Dimension Table
The second two digits
0 = Standard
Q = -10 +30%
See Ordering
• Axial
HighAluminum
ripple capability
Electrolytic
G = 16
R = 200
indicate the two most
A-Z = High
M = ±20%
Options Table
•Overview
Polarized all-welded
design
Applications
H = 25
U = 350
significant
digits of the
Performance
T = -10 +50%
• Outstanding electrical
K = 40 performance
V = 400
capacitance value. The
M Series
= 63 is an
Y =electrolytic
450
first digit indicates
thePEG130
total
KEMET's
PEG130
capacitor
with
KEMET's
is a new generation of high performance axial
Benefits
number digits.
outstanding electrical performance. This product is constructed in
electrolytic capacitors, designed for applications with very long
a• polarized,
all-welded
design with tinned copper wire leads and
service life requirements. The capacitors are especially suitable
1,600 hours
at +150°C
the
negative
pole
connected
the –case
the capacitor. The
for LED/lamp power supplies, automotive and low voltage power
• Resistance
to vibrations
PEG126 Series High Ripple
Current
150ºC,to25
63ofVDC
PEG130
winding
isSystem
housed
in temperature
a cylindrical aluminum can with a
electronic applications.
Part
Number
• Resistance
to high
ambient
Capacitance Range: 250 to 4,000 µF • Temperature Range: −40°C to +150°C • Lifetime: D=16 6,300 Hours, D=20 8,400 Hours
high
purity
aluminium
lid and aCapacitors
high quality rubber gasket. The
• High
ripple
capability
Axial
Aluminum
Electrolytic
low
ESR
is aall-welded
result of adesign
low
system 368
• Polarized
PEG126
H resistive electrolyte/paper
F
E
Q
E1
and
an all-welded
design.performance
• Outstanding
electrical
Capacitance
Axial Leads
PEG130 Series, 105ºC
PEG220 Series, +150ºC
One world.Packaging
One KEMET
Series
Voltage (VDC)
Size Code
Version
Tolerance
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
A4011_PEG124 • 4/16/2015
1
Axial Aluminum
H = 25
See Dimension
The second two digits indicate
E = Standard
Q = -10 +30%
E1 = Bulk
Overview
Applications
Electrolytic
K = 40
Table
the two most significant digits of
M = ±20%
M = 63
the capacitance value. The first
digit indicates the total
number PEG220 is a new generation of high performance axial
KEMET's
KEMET's
BenefitsPEG220 is an electrolytic capacitor with outstanding
digits.
electrical performance. The device has a polarized all-welded
electrolytic capacitors. It is designed for automotive applications
design,
tinned copper
leads, andaxial
a negative
with extremely high demands.
• Next-generation
highwire
performance
series pole connected
to Very
the case.
The
PEG220lifewinding
is housedhours
in a cylindrical
•
long
operational
(up
to
160,000
at
80°C)
PEG127 Series High Ripple
Current
150ºC, 25 – 63 VDC
aluminum
can
with
a high purity aluminum lid and high
Number
System
•Part
Minimal
heat
generation
µF
•
Temperature
Range:
quality
gasket.
Low ESR issystem
the result of a low resistive
• New rubber
low ESR
electrolyte/paper
electrolyte/paper
system and
Thanks
to its 318
PEG127with capacitances
H an
Adesign.
0
Q
T1
• Available
asall-welded
high as 6,300
µF and
voltage
mechanical
robustness,
the
PEG220
is
suitable
for
use
in
mobile
options of 25, 40, and 63 VDC
Capacitance
Series installations
Voltage
SizetoCode
Version
Packaging
and
aircraft
with(VDC)
operation up
+150°C. Capacitance Code (µF)
Tolerance
• Polarised
all-welded design
One world. One KEMET
• KEMET
Outstanding
electrical
Axial Aluminum
H = 25performance
The
second
two963-6300
digits indicate
0 = Standard
©
Electronics
Corporation
• P.O. Box See
5928Dimension
• Greenville, SC
29606
(864)
• www.kemet.com
Electrolytic
K = 40
Table
M = 63
digit indicates the total number
Benefits
digits.
• 2,000 hours at +150°C
• VeryLife
high 105ºC,
ripple current
PEG130 Series Very Long
25 – 63 VDC
Part
Number
System
•
Up
to
21A
RMS, continuous
Capacitance Range: 900 to 6,300 µF •ripple,
Temperature
Range:load
• High vibration resistance
PEG130all-welded design
H
H
436
0
• Polarized
• Outstanding electrical performance
Series
Voltage (VDC)
Size Code
Q = -10
+30%
See
Ordering 1
A4012_PEG126
• 4/16/2015
Options Table
Q
Version
Axial Aluminum
H = 25
The
second
two963-6300
digits indicate
0 = Standard
© KEMET
Electronics Corporation
• P.O. Box See
5928Dimension
• Greenville, SC
29606
(864)
• www.kemet.com
Electrolytic
K = 40
Table
M = 63
digits.
L1
Capacitance
Packaging
Tolerance
Q = -10
+30%
See
Ordering 1
A4013_PEG127
• 4/16/2015
Options Table
PEG220 Series Very High Ripple Current 150ºC, 25 – 63 VDC
Part Number System
Capacitance Range: 250 to 4,700 µF • Temperature Range: −40°C to +150°C • Lifetime: 2,000 Hours
PEG220
Series
H
Voltage (VDC)
F
Size Code
415
0
Version
Axial Aluminum
= 25
See5928
Dimension
The29606
second
two 963-6300
digits indicate
the
0 = Standard
© KEMET
Electronics HCorporation
• P.O. Box
• Greenville, SC
(864)
• www.kemet.com
Electrolytic
K = 40
Table
two most significant digits of the
M = 63
capacitance value. The first digit
indicates the total number digits.
Q
E1
Capacitance
Packaging
Tolerance
Q = -10
+30%
E1 = Bulk
A4045_PEG130
• 4/16/2015
M = ±20%
1
9
Radial Crown Aluminum Electrolytic Capacitors
electrolyte/paper
system and an all-welded design. Thanks to its
• High vibration resistance
mechanical
the PEG226 is suitable for use in mobile
• Polarized robustness,
all-welded design
and
aircraft installations
operation up to +150°C.
• Outstanding
electrical with
performance
PEH126, +150°C, PEH220, +150°C,
PEH225, +125ºC and +150ºC, and PEH226, +150ºC
Benefits
Overview
Aluminum Capacitors
Applications
• 2,000electrolytic
hours at +150°C
Axial Leads (cont.)
These
capacitors contain a radial crown which
KEMET’s PEH126, PEH220, PEH225, and PEH226 are a high
• Extremely
high
current
allows
them to
be ripple
mounted
in a standing position. They feature
electrolytic capacitor. It is designed for automotive
PEG225 Series Extremely
High
Ripple
Current
125°C
150°C, 25 – 63 performance
VDC
• Up to
28 Aelectrical
ripple,
RMS,
continuous
load & all-welded
outstanding
performance,
a polarized,
Part
Number
System
applications with high demands on resistance to vibrations and
• Temperature
+125°C
(at UR) and −40°C to +150°C (at reduced voltage) • Lifetime: 2,000 Hours
•design,
HighµF
vibration
resistance
tinned
copper
wire Range:
leads, a −40°C
negativetopole
connected
high ambient temperature.
•to Polarized
all-welded
design
the PEG225
case, and plastic insulation.
in a
H The winding is housed
F
422
0
M
• Outstanding
electrical
cylindrical
aluminium
canperformance
with a high purity aluminium lid and a
Seriesrubber gasket.
Voltage
Version
Capacitance Tolerance
high quality
Low(VDC)
ESR is a resultSize
of aCode
low resistive Capacitance Code (µF)
electrolyte/paper
design.
Thanks
Axial Aluminum system
H = and
25 an all-weldedSee
Dimension
Tableto itsThe second two digits indicate the
0 = Standard
Q = -10 +30%
Electrolytic
40 capacitors are suitable for use in two most significant digits of the
M = ±20%
mechanical
robustnessK =these
M = 63
mobile and aircraft installations
with operation up to +150°C. capacitance value. The first digit
Benefi
ts Ripple Current 150°C, 25 – 63 VDC
PEG226 Series Extremely
High
Part Number System
Radial Crown
• Up to 2,000 hours at +150°C
• Resistance
PEG226to vibrations H
F
415
• Resistance
Series to high ambient
Voltagetemperature
(VDC)
Size Code
• High ripple current
Axial Aluminum
H = 25
See Dimension Table
The second two digits indicate the
• LowElectrolytic
ESR
K = 40 • P.O. Box 5928 • Greenville, SC 29606 (864)
two963-6300
most signifi
cant digits of the
© KEMET
• www.kemet.com
= 63
• Polarized all-weldedMdesign
• Outstanding electrical performance
• Radial crown which
allows mounting in a standing position
0
M
Version
0 = Standard One world.
Q = -10One
+30%KEMET
M = ±20%
A4015_PEG225
• 4/16/2015
1
PEH126 High Ripple Current
150°C, 25 – 63 VDC
Part Number System
PEH126
Series
H
Voltage (VDC)
F
Size Code
368
Capacitance Code (pF)
© KEMET
• Greenville,
SCTable
29606 (864)
RadialElectronics
Crown Corporation
H = 25 • P.O. Box 5928See
Dimension
The 963-6300
second two• www.kemet.com
digits indicate the
Aluminum Electrolytic K = 40
with Soldering Star
M = 63
Termination
Radial Crown Aluminum Electrolytic Capacitors
E
Q
Capacitance
Version
One world.Tolerance
One KEMET
A4016_PEG226
1
E = Standard
Q = -10• 4/16/2015
+30%
PEH126, +150°C, PEH220, +150°C, PEH225, +125ºC and +150ºC, and PEH226, +150ºC
Radial Crown
Aluminum 25
Electrolytic
150°C,
– 63Capacitors
VDC
System
PEH126,Number
+150°C, PEH220,
+150°C,cont'd
PEH225, +125ºC and +150ºC, and PEH226, +150ºC
Capacitance Range: 250 to Part
4,700 µF
• Temperature
Range:
H
Part PEH220
Number System cont'd
Series
PEH220
Voltage (VDC)
H
F
Size Code
F
415
415
Radial
Crown Corporation
H = 25 • P.O. Box 5928See
Dimension
The 963-6300
second two
digits indicate the
© KEMET
Electronics
• Greenville,
SCTable
29606 (864)
• www.kemet.com
Aluminum
Electrolytic K =Voltage
40
two most
significant
digits
of the
Series
(VDC)
Size Code
Capacitance
Code
(pF)
with Soldering Star
M = 63
Termination
indicates
thetwo
total
number
digits.
Radial
Crown
H = 25
See Dimension Table
The
second
digits
indicate
the
Aluminum Electrolytic K = 40
with Soldering Star
M = 63
Termination
125ºC & 150ºC,
25 – 63 VDCF
PEH225
H
422
0
Version
0
M
Capacitance
One world.Tolerance
One KEMET
M
0 = Standard
Q = -10
+30%
A4017_PEH126_220_225_226
• 4/16/2015
M = Capacitance
±20%
Version
Tolerance
0 = Standard
Q = -10 +30%
M = ±20%
0
M
Capacitance
Tolerance
Capacitance Range: 470 to 6,300 µF • Temperature Range: −40°C to +125°C (at UR) and −40°C to +150°C (at reduced voltage) • Lifetime: 2,000 Hours
Series
PEH225
Radial Crown
Aluminum
Electrolytic
Series
with Soldering Star
Termination
Radial
Crown
Aluminum Electrolytic
with Soldering Star
Termination
PEH226
10
Series
PEH226
Radial Crown
Aluminum
Electrolytic
Series
Voltage (VDC)
H
H = 25
K =Voltage
40
(VDC)
M = 63
H = 25
K = 40
M = 63
H
Voltage (VDC)
H
H = 25
K =Voltage
40
(VDC)
Size Code
Version
See Dimension Table
Size Code
0 = Standard
Version
Q = -10 +30%
M = Capacitance
±20%
Tolerance
See Dimension Table
two most
significant
digits
of the
Capacitance
Code
(pF)
indicates
thetwo
total
number
digits.
The
second
digits
indicate
the
0 = Standard
Q = -10 +30%
M = ±20%
F
415
0
M
Capacitance
Tolerance
F
422
0
Size Code
Version
See Dimension Table
Size Code
two most
significant
digits
of the
Capacitance
Code
(pF)
0 = Standard
Version
F
415
0
M
M
Q = -10 +30%
M = Capacitance
±20%
1
for industrial and commercial applications demanding high
Screw Terminal Aluminum Electrolytic Capacitors
reliability and long-life expectancy such as frequency converters,
uninterruptible power supply (UPS) systems and switch mode
power supplies (SMPS).
PEH225
H
F
AC motor control, traction, welding, and measuring.
ALS32/33 Series, +85°C
Aluminum Capacitors
Overview
Series
Voltage (VDC)
Size Code
422
Applications
Capacitance
Code (pF)
0
M
Version
Capacitance
Tolerance
RadialALS32/33
Crown
H = 25of screw terminal
Seecapacitors
Dimension Table
two digits
indicate the
= Standard is designed
Q = -10 for
+30%
KEMET’s
Series
meets The second
KEMET’s
ALS32/33
Series of 0capacitors
industrial
Aluminum
Electrolytic
= 40 market. This range offers high CV two most
cant digits of
the
M = ±20%
the
requirements
of theK Asian
andsignifi
commercial
applications
such as switch mode
power
Radial Crown (cont.)
with Soldering
M = 63
Benefi
ts Star
per unit
volume
coupled with high ripple currents and long-life indicates
supplies
uninterruptible power supply (UPS) systems,
Termination
the total(SMPS),
number digits.
performance.
variable speed drives, frequency inverters, welding equipment,
150ºC, 25 – 63 VDC
• Compact size
and2,000
energyHours
storage in pulse discharge applications.
Capacitance Range: 250 to 4,700 µF • Temperature Range: −40°C to +150°C • Lifetime:
• Long life, up to 20,000 hours at +85°C (VR, IR applied)
PEH226
H
F
415
0
M
• Excellent surge voltage capability
Capacitance
Terminal
Aluminum
Electrolytic
Capacitors
Seriesdesigns available
Voltageupon
(VDC)request Size Code
Version
•Screw
Optimized
ALS36/37
Series,
+85°C See Dimension Table
Radial Crown
H = 25
with Soldering Star
Termination
Overview
Benefits
K = 40
M = 63
ALS36/37
Series offorscrew
terminal
capacitors meets
•KEMET's
Case sizes
and terminals
the Asian
market
the
requirements
of
the
North
American
market.
This range
CVcurrent
per unit volume coupled with high ripple currents
Screw Terminal •offers
Highhigh
ripple
long-lifesurge
performance.
The ALS36/37 Series range is
•and
Excellent
voltage capability
ALS30/31 Series High •manufactured
CV
Valuedesigns
&
Long
Lifeupon
85°C,
25 – 500 VDC
in China.
Optimized
available
request
Part Number System
Tolerance
indicates
the total number digits.
Applications
0 = Standard
Q = -10 +30%
M = ±20%
KEMET's ALS36/37 Series of capacitors is designed for industrial
and commercial applications such as switch mode power
supplies (SMPS), uninterruptible power supply (UPS) systems,
variable speed drives, frequency inverters, welding equipment,
and energy storage in pulse discharge applications.
ALS3
Series
Screw Terminal
Aluminum
Electrolytic
0
Stud Option
0 = Plain Can
1 = Threaded
mounting stud
A
153
DA
Termination
Size Code
See Termination
Table
First 2 digits equals first 2
significant figures, 3rd digit
is the number of additional
zeros.
See Dimension
Table
Benefits
• Imperial case sizes and terminals for the North American
market
Long
life, up&to Long
20,000 hours
+85°C 350
(VR, IR–applied)
ALS32/33 Series High •CV
Value
Life at85°C,
500 VDC
System Range: −40°C
HighNumber
ripple
Capacitance Range: 220 to•Part
18,000
µF •current
Temperature
to +85°C • Lifetime: 40,000 Hours
ALS3designs available upon
2
A
391
•© KEMET
Optimized
Electronics Corporation • P.O. Boxrequest
5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
Series
Stud Option
Termination
© KEMET
• P.O.
SC 29606 (864) 963-6300
• www.kemet.com
ScrewElectronics
Terminal Corporation
2 = Plain
CanBox 5928 • Greenville,
See Termination
First 2 digits
equals first 2
025
3 = Threaded mounting
stud
Table
significant figures, 3rd digit is
the number of additional zeros.
Voltage (VDC)
025 = 25
040 = 40
063 = 63
100 = 100
200 = 200
250 = 250
D2C
350 = 350
400 = 400
415 = 415
450 = 450
500 = 500
350
A4017_PEH126_220_225_226 • 4/16/2015
2
One(VDC)
KEMET
Size Code One world.
Voltage
A4031_ALS30_31
• 4/16/2015
1
See Dimension
Table 350 = 350
400 = 400
450 = 450
500 = 500
ALS36/37 Series High Ripple Current 85°C, 25 – 500 VDC
Number
System Range: −40°C to +85°C • Lifetime: 40,000 Hours
Capacitance Range: 150 toPart
470,000
µF • Temperature
ALS3
6
A
153
D2C
Series
Stud Option
Capacitance
Code (µF)
Size Code
© KEMET
• P.O. Box 5928 Termination
• Greenville, SC 29606
(864) 963-6300
• www.kemet.com
Screw Terminal
Aluminum
Electrolytic
6 = Plain Can
7 = Threaded
mounting stud
See Termination
Table
zeros.
See Dimension
Table
One 025
world. One KEMET
Voltage (VDC)
A4032_ALS32_33
• 4/16/2015
025 = 25
040 = 40
050 = 50
063 = 63
075 = 75
100 = 100
160 = 160
1
200 = 200
250 = 250
350 = 350
400 = 400
450 = 450
500 = 500
A4033_ALS36_37 • 4/16/2015
1
11
ALS60/61 Series, +85°C
• Excellent
surgeand
voltage
(UPS)
systems,
switchcapability
mode power supplies (SMPS) but the
• Optimized
designs available
upon increased
request ripple currents at
extended
temperature
range allows
lower temperatures.
Overview
Aluminum Capacitors
Applications
KEMET's ALS60/61 Series of screw terminal capacitors is
Typical applications for KEMET's ALS60/61 Series of capacitors
designed
for high Aluminum
voltage, high
ripple current
applications. They
include smoothing, energy storage, demanding power supplies,
Screw
Terminal
Electrolytic
Capacitors
Benefi
ts
are ideally suited for industrial and commercial applications
AC motor control, traction and welding.
Screw Terminal (cont.)
demanding
high
reliability
and
long-life
expectancy
such
as
• Case sizes and terminals for the Asian market
power
ALS40/41 Series High frequency
Value
25 –at500
VDCsupply (UPS)
•CV
Long
life,converters,
up105°C,
to 9,000uninterruptible
hours
+105°C
Number
System
systems
and
switch
mode
power
supplies
(SMPS).to +105°C • Lifetime: 15,000 Hours
680,000
µF
•
Temperature
Range:
−40°C
PEH169 Series, +85°C
Overview
ALS4
0
A
•KEMET's
Optimized
designs
available
upon request
PEH169
Series
is a long-life
electrolytic capacitor with
Applications
DA
025
Typical applications for KEMET's PEH169 capacitor
Size Code
Voltage (VDC)
outstanding reliability and electrical performance. The device
include smoothing, energy storage or pulse operation in
Terminalall-welded
0 = Plain
Can heavy See
First 2 digits equals
first 2
See Dimension
= 25 supplies, process
250 = 250control,
hasScrew
a polarized
design,
dutyTermination
screw terminals,
telecommunication
demanding025
power
Aluminum
1 = Threaded
Table
Table
040 = 40
350 = 350
extended
cathode
construction,
safety
vent,
and
plastic
AC
motor
control,
traction,
welding,
and
measuring.
Electrolytic
mounting stud
063 = 63
400 = 400
insulation.
100 = 100
415 = 415
BenefitsThe PEH169 Series winding is housed in a cylindrical zeros.
160 = 160
450 = 450
aluminum can with a reinforced molded lid incorporating a
200 = 200
500 = 500
Screw
Terminal
Aluminum
Electrolytic
Capacitors
safety
Thetosealing
designed
• Longvent.
life, up
20,000system
hours atis +85°C
(VRfor
, IR electrolyte
applied)
•leakage-free
High ripple operation
current and a very low gas-diffusion rate of
contact
the winding and case
Excellent
surge
voltage
capability
ALS42/43 Series High •electrolyte.
CV
ValueMechanical
105°C,
350
–between
450 VDC
allows
excellent
heat
transfer
from
the
winding
to the
•Part
Optimized
designs
available upon
request
Number
System
Capacitance Range: 1,000 to
15,000
µF
• Temperature
Range:
−40°C
to ambient,
+105°C • Lifetime: 15,000 Hours
which
means
cooler
operation.
Low
ESR
is
the
result
of a low
Overview
Applications
resistiveALS4
paper/electrolyte system,2 at least two tabs perAfoil and
102
K3C
350
an all-welded
design.
KEMET's
PEH169
Series
is
a
long-life
electrolytic
capacitor
with
Typical
applications
for
KEMET's
PEH169
capacitor
Series
Stud Option
Termination
Size Code
Voltage (VDC)
outstanding reliability and electrical performance. The device
include smoothing, energy storage or pulse
in KEMET
Oneoperation
world. One
Screw Terminal
2 = Plain Can
See Termination
See Dimension Table 350 = 350
has
a polarized
all-welded
heavy
screw Table
terminals,
telecommunication
demanding power
supplies,
control,1
©
KEMET
Electronics
Corporation
• P.O. Box
5928duty
• Greenville,
SC 29606 (864) 963-6300
A4036_ALS40_41
4/16/2015
Aluminum
Electrolytic
3 = design,
Threaded
mounting
signifi
cant• fiwww.kemet.com
gures, 3rd digit is
400process
= •400
extended cathode construction,
safety vent, and plastic
AC motor
control,zeros.
traction, welding, and measuring.
stud
the number
of additional
415 = 415
Benefi
ts
450 = 450
insulation. The PEH169 Series winding is housed in a cylindrical
aluminum
with a reinforced molded lid incorporating a
• High CVcan
value
safety
vent.
The
system
designed
electrolyte
IR applied)
Long
life, up85°C,
tosealing
38,000
hours atis +85ºC
(VR,for
ALS60/61 Series High •leakage-free
CV
Value
550
operation
and a VDC
very low gas-diffusion
rate of
•
Low
ESR
and
ESL
Part
System Range: −40°C to +85°C
Capacitance Range: 560 toelectrolyte.
3,300Number
μF •Mechanical
Temperature
• Lifetime: 20,000 Hours
contact
between
the
winding
and case
• High stability, 10 years shelf life
excellent
heat transfer from the winding to the ambient,
•allows
Optimized
ALS6designs available on0request
A
561
KE
550
which means cooler operation. Low ESR is the result of a low
Stud Option
Size Code
Voltage (VDC)
resistive Series
paper/electrolyte system,
at least two tabs Termination
per foil and
Screw Terminal
0 = Plain Can
See Termination Table
First 2 digits equals first
See Dimension Table
550 = 550
all-welded
design.
Series
Stud Option
Termination
153
PEH169 Series, +105°C
2 significant figures, 3rd
1 = Threaded mounting
digit is the number of
stud
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300
• www.kemet.com
additional
zeros.
A4037_ALS42_43 • 4/16/2015
1
Benefits
• High
performance
PEH169 Series Low ESR
85°C,
10 – 450 VDC
Part
System
• LongNumber
life,
to 18,000
hours Range:
at +105ºC−40°C
(VR, IR applied)
µFup• Temperature
• Low ESR and ESL
PEH169
E life
• High
stability, 10 years shelf
• Optimized
designs
available
on request
Series
Rated Voltage (VDC)
A
Size Code
510
V
M
U2
Version
Capacitance
Tolerance
Stud Option
Screw Terminal E = 10
R = 200
See Dimension Table The second 2 digits indicate
0 = Standard
Aluminum
= 16
S• P.O.
= 250
2 most
signifi•cant
digits
© KEMET
ElectronicsGCorporation
Box 5928 • Greenville, SC 29606 the
(864)
963-6300
www.kemet.com
Electrolytic
H = 25
U = 350
of the capacitance value.
K = 40
V = 400
The first digit indicates the
M = 63
O = 420
total number digits.
P = 100
Y = 450
Q = 160
PEH169 Series Low ESR & ESL 105°C, 10 – 350 VDC
Number
System
Capacitance Range: 100 to©Part
330,000
µF • Temperature
to +105°C
• Lifetime:
Hours
KEMET Electronics
Corporation • P.O.Range:
Box 5928−40°C
• Greenville,
SC 29606 (864)
963-6300 25,000
• www.kemet.com
PEH169
Series
Screw Terminal
Aluminum
Electrolytic
12
E
A
Rated Voltage (VDC)
E = 10
G = 16
H = 25
K = 40
M = 63
P = 100
Q = 160
R = 200
S = 250
U = 350
468
One world.
KEMET
Q = -10 +30%
U2One
= Plain
Can
MA4042_ALS60_61
= ±20%
B2• 4/16/2015
= Threaded 1
mounting stud
A4035_PEH169_85ºC • 4/16/2015
0
Q
U2
Capacitance
Tolerance
Stud Option
Size Code
Version
See Dimension Table
The second 2 digits indicate
the 2 most significant digits
0 = Standard
Q = -10 +30%
1
U2 = Plain Can
B2 = Threaded
mounting stud
A4038_PEH169_105ºC • 4/16/2015
1
cooler operation and very high current ratings.
Aluminum Capacitors
Snap-In
Aluminum Electrolytic Capacitors
Benefits
ALC10
Series,
+85ºC
• Long life, up
to 8,000 hours
at +125°C (V , I
• High ripple current capability
Screw Terminal (cont.)
R
R
applied)
Overview
Applications
Part Number System
PEH200 Series High CV Value 85°C, 25 – 500 VDC
KEMET’s ALC10 Series of snap-in capacitors covers a wide
KEMET’s ALC10 Series of capacitors is ideally suited for
range
of case sizes and voltage
ratings. The ALC10
industrial
and commercial
high reliability
PEH200
H
A Series is
515
0 applications demanding
M
U2
designed for high voltage, up to 550 VDC, high ripple current
and long life expectancy. Typical applications
Capacitanceinclude frequency
Stud and
Option
Series and features
Voltage
(VDC)
Size Code
Code (µF)uninterruptible
Versionpower supply (UPS) systems
applications
surge
voltage capability
and very long-Capacitance
converters,
Tolerance
life performance.
switch
mode
power
supplies
(SMPS).
Screw Terminal H = 25
X = 385
See Dimension table
The second 2 digits indicate
0 = Standard
Q = -10 + 30%
U2 = Plain Can
Aluminum
K = 40
V = 400
Pin/Solder
ElectrolyticTag/Audio
M = 63 Aluminum
O = 420Electrolytic Capacitors
P = 100
Y = 450
ALC10S Series,
+85°C
S = 250
Z = 500
U = 350
the 2 most significant digits
M = ±20%
B2 = Threaded
mounting stud
Overview
Benefits
Applications
KEMET's ALC10S Series of capacitors features improvements in
Modern electrolytic capacitors are designed
use inOne
power
Oneforworld.
KEMET
PEH205 Series High Ripple 125°C, 16 – 100 VDC
Part
Number
• Compact
size
390,000
µF • System
Temperature Range: −40°C to +125°C • Lifetime: 6,000 Hours
general
construction
of the
capacitors
to achieve
better
in 963-6300
supplies,
thus, most aspects of their design
have been
optimized1
©
Electronics
Corporation
• P.O.
Box 5928
SCresults
29606 (864)
• www.kemet.com
A4034_PEH200
• 4/16/2015
, I applied)
• KEMET
Long life,
up to 18,000
hours
at +85°C
(V• Greenville,
R
R
audio,
where
delity of the waveshape
is very important.
Great
advances inQdesign may not be
G
A
518for this application. Some
0
• HighPEH205
ripple ficurrent
U3
attention
has
been
paid
to
the
construction
details
that
can
affect
benefi
cial
in
audio
applications
where the requirements of the
• High voltage
Capacitance
Stud Option
Series such as foil
Voltage (VDC)
Sizeand
Codemechanical
Capacitance capacitors
Code (µF) are very
Version
performance
its connections
different.
• Excellent surge
voltage type,
capability
Tolerance
construction.
Details
of
capacitance
and
case
sizes
are
available
• Optimized
designs Gavailable
upon request
Screw Terminal
= 16
See Dimension
The second 2 digits
0 = Standard
Q = -10 + 30%
U3 = Plain Can
in KEMET's
slit foil capacitor
Aluminum
H = 25 range.
Table
indicate theKEMET
2 most has produced the ALC10S Series of slit foil
B3 capacitors
= Threaded
Electrolytic
K = 40
significant digits
of the
mounting
stud
specifi
cally for audio applications. Its patented design
eliminates
L = 55
capacitance circulating
value. The currents in the aluminium foils. This spurious current
M = 63
first digit indicates the total
ow on the capacitor plates is known to occur but not apparent in
P = 100
number fldigits.
most applications.
Snap-In
A4039_PEH205 • 4/16/2015
ALC10 Series Long Life
85°C,
Benefi
ts 35 – 550 VDC
Part Number System
•
•
•
•
2 pin snap-in
ALC10
A
Long life,
up to 18,000 hours at +85°C
(VR, IR applied) 392
Termination
Slit foil Series
technology
Specifi
cally
designed
for
audio
applications
use
only
Snap-In type Aluminum
See Termination Table
First
two digits represent
Electrolytic
significant figures. Third
digit specifies number of
zeros.
BB
040
Size Code
Rated Voltage (VDC)
See Dimension Table
035 = 35
040 = 40
063 = 63
100 = 100
200 = 200
250 = 250
1
350 = 350
400 = 400
450 = 450
500 = 500
550 = 550
ALC10S Series Slit Foil Audio 85°C, 50 – 100 VDC
System
Capacitance Range: 10,000Part
µF •Number
Temperature
Range: −40°C to +85°C • Lifetime: 29,000 Hours
ALC10
S
110 2
DF
Series
Construction
Unique Sequential Number
Size Code
Snap-InElectronics
type Aluminum
= Slit5928
foil • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
See Dimension Table
© KEMET
Corporation • P.O.S Box
Electrolytic
A4020_ALC10 • 4/16/2015
1
A4029_ALC10S • 4/16/2015
1
13
Aluminum Capacitors
Snap-In Aluminum Electrolytic Capacitors
PEH526 Series, +125ºC
Benefits
Snap-In (cont.)
• Snap-In
Overview
Applications
• Long life, 3,000 hours at +85°C (VR, IR applied)
KEMET's
PEH526105°C,
is an electrolytic
capacitor
with outstanding
• PCBCurrent
mounting
KEMET's PEH526 is a high performance electrolytic capacitor
ALC40 Series High Ripple
25 – 500
VDC
electrical
performance.
The
device
is
polarized,
a negative
Part
Number
System
•
Low
ESR
and
ESL
designed
for Hours
automotive applications with high vibrations and
Capacitance Range: 47 to 120,000 µF • Temperature Range: −40°Chas
to +105°C
• Lifetime:
14,000
pole
connected
to the case and a plastic cover for the outer case.
• High
ripple current
high ambient temperatures.
Low ESR
is the result of a low resistive
electrolyte/paper system.
ALC40
A
822
BB
025
TogetherSeries
with the TDC thermal
concept, this range gives
the Code (µF)
Termination
Capacitance
Size Code
Voltage (VDC)
PEH526 a very high ripple current capability. It is suitable for
Snap-In type Aluminum See Termination Table
First two digits equals first two
See Dimension Table
025 = 25
250 = 250
use in both
mobile and aircraft applications with operation up to
Electrolytic
040 = 40
350 = 350
Snap-In
Aluminum Electrolytic Capacitors significant figures, third digit is the
+125°C.
number of additional zeros.
063 = 63
400 = 400
PEH532 Series, +105ºC
100 = 100
200 = 200
Benefits
Overview
450 = 450
500 = 500
Applications
& ESLfor85°C,
35 –applications
450 VDC
• Designed
automotive
Part Number
System
KEMET's
PEH532
is a long-life
capacitor
designed
• Temperature
to +85°C
• Lifetime:Typical
6,000applications
Hours
for KEMET's PEH532 capacitor include
I electrolytic
applied)−40°C
• 3,000µF
hours
at +125°C
(V , Range:
R
R
offer high ripple
current capability and low mounting cost. Low
switch mode power supplies (SMPS), drives, welding equipment,
•to Resistance
to vibrations
PEH506
J resistive paper/electrolyte
AC
433
0
M other power electronic
2
ESR
is
the
result
of
a very low
system.
uninterruptible
power supplies
(UPS), and
• Low ESR
Capacitance
Low
ESR,
together
with
the
TDC
thermal
concept,
gives
the
applications
where
high
current
ratings
and
compact
size
are
• High Series
ripple current capability
Voltage (VDC)
Size Code
Version
Termination
Tolerance
PEH532 a high ripple current capability.
important.
Snap-In
type
J = 35 • P.O. Box 5928See
Dimension
The(864)
second
two digits
indicate
0 = Standard
© KEMET
Electronics
Corporation
• Greenville,
SC 29606
963-6300
• www.kemet.com
Aluminum
M = 63
Table
Electrolytic
P = 100
R = 200
S = 250
digits.
U = 350
V = 400
Y = 450
M A4026_ALC40
= ±20%
See
Termination 1
• 4/16/2015
Table
Benefits
• Snap-In
PEH526 Series Automotive
25 – 63
IR applied)
• 1,500125°C,
hours at +105°C
(VR,VDC
Part Number System
PCB mounting
Capacitance Range: 820 to•6,800
µF • Temperature Range: −40°C to +125°C • Lifetime: 20,000 Hours
• Low ESR and ESL
PEH526
H
AB
427
0
•© KEMET
High ripple
current
Electronics
Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
Series
Snap-In type
Aluminum
Electrolytic
Voltage (VDC)
H = 25
K = 40
M = 63
Size Code
Version
See Dimension
Table
significant digits of the
first digit indicates the
0 = Standard
M
3
A4019_PEH506 • 4/16/2015
Capacitance
Termination
Tolerance
M = ±20%
See Termination
Table
M
2
1
Part Number
µF • Temperature
PEH532
J
AC
433
0
Series
Voltage (VDC)
Size Code
Version
Snap-In type
Aluminum
Electrolytic
J = 35
M = 63
P = 100
R = 200
S = 250
U = 350
V = 400
Y = 450
See Dimension
Table
0 = Standard
Termination
A4028_PEH526 • 4/16/2015
M = ±20%
1
See Termination
Table
14
A4023_PEH532 • 4/16/2015
1
PEH536 a high ripple current capability.
important.
Aluminum Capacitors
Benefits
Snap-In (cont.)
• Snap-In
• 4,600 hours at +105°C (VR, IR applied)
& ESL
105°C, 35 – 450 VDC
•Part
PCB
mounting
Number
Capacitance Range: 150 toSnap-In
µF
• Temperature
Aluminum
Capacitors
•22,000
Low ESR
and
ESLElectrolytic
• HighPEH534
ripple current
J
BC
456
0
ELH Series, +85ºC
Series
Voltage (VDC)
Size Code
Version
M
2
Termination
Snap-In type
Overview
Aluminum
Electrolytic
J = 35
See Dimension
0 = Standard
M = ±20%
See Termination
M = 63
Table
indicate the twoApplications
most
Table
P = 100
KEMET's ELH SeriesRof= 200
aluminum electrolytic snap-in capacitors
Typical applications include general purpose power electronics,
S = 250
are designed with snap-lock
UPS, SMPS and battery chargers.
U = 350 terminals for printed circuit board
mounting. The case isV aluminum
with an insulated sleeve and
= 400
Y = 450
safety vent at the bottom.
Part Number System
Benefits
PEH536
J
Snap-In
CapacitorsAD
439
0
• Suited for high quality, high reliability applications
Series
Voltage (VDC)
Size Code
Version
• Low impedance
• Operating
temperature
Snap-In type
J = 35 of up to 85°C See Dimension
0 = Standard
Aluminum
M = 63
Table
• 2,000
hour operating
life
Electrolytic
P = 100
Overview
• RoHS Compliant and
lead-free
Applications
R = 200
M
ELG Series, +105ºC
S = 250
2
Capacitance
One world.Termination
One KEMET
Tolerance
A4024_PEH534 • 4/16/2015
1
M = ±20%
See Termination
Table
KEMET's ELG Series
aluminum electrolytic snap-in capacitors
Typical applications include general purpose power electronics,
U =of350
V = 400 terminals for printed circuit board
are designed with snap-lock
UPS, SMPS and battery chargers.
450
mounting. The caseYis=aluminum
with an insulated sleeve and
safety vent at the bottom.
ELH Series Low Impedance
85°C, 6.3
– 450 VDC
Part Number
System
Benefits
ELH
159
M
6R3
Corporation
• P.O.
Boxapplications
•© KEMET
Suited Electronics
for high reliability,
low
ESR
Series
Tolerance
Rated Voltage (VDC)
• Operating temperature of up to 105°C
• 2,000
hour operating
Snap-In
Digits 4life
– 5 represent the first
Aluminum
digits
of the capacitance
• RoHS
Complianttwo
and
lead-free
Electrolytic
M = ±20%
value. The final digit indicates
the number of zeros to be
added.
6R3 = 6.3
010 = 10
016 = 16
025 = 25
035 = 35
050 = 50
063 = 63
080 = 80
100 = 100
160 = 160
180 = 180
200 = 200
250 = 250
350 = 350
400 = 400
450 = 450
A
Electrical
Parameters
One world. OneAA
KEMET
Q1
A4025_PEH536 • 4/16/2015
Size Code
Packaging
A = Standard
See Dimension
Table
See Ordering
Options Table
A
Q1
AA
Electrical
Parameters
Size Code
Packaging
See Dimension
Table
See Ordering
Options Table
1
ELG Series General Purpose
105°C,
6.3 – 450 VDC
Part Number
System
µF • Options
Temperature
Ordering
Table
ELG
Packaging Type
Series
129
Lead Length (mm)
M
6R3
Lead and
Tolerance
Packaging
Code Rated Voltage (VDC)
Standard
Bulk Packaging
Snap-In
Digits
4 – 5 represent
the firstOptionsM = ±20%
Aluminum
Bulk (box) two digits of the5.8capacitance
± 1.0
AA
Electrolytic
Bulk (box)
± 0.2to be
AV
the number of4.0
zeros
6R3 = 6.3
100 = 100
A = Standard
010 = 10
160 = 160
016 = 16
180 = 180
025 = 25
200 = 200
added.
035 = 35
250 = 250
050 = 50
350 = 350
063 = 63
400 = 400
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606080
(864)
963-6300 •450
www.kemet.com
= 80
= 450
A4018_ELH • 4/16/2015
1
Ordering Options Table
Packaging Type
Lead Length (mm)
Lead and
Packaging Code
Standard Bulk Packaging Options
15
inductance force the input and output together electrically, making
its unwanted characteristics very critical for performance - Figure 1.
Solder Pin/Tag
Aluminum Capacitors
The new TNC behaves differently because the input must flow
along the capacitor plate to reach the output. The signal is forced
into pure capacitance with most of the unwanted resistance and
inductance
Benefits appearing on each side of the bulk capacitance. The
residual defects, therefore, tend to assist capacitance filtering in
the
T-Network
design
2.
• Solder
tag (ALT)
and- Figure
DIN standard
solder pin (ALP)
IR applied)
• Long life,
up toESR
26,000
hours at
(VR,VDC
ALP20 and ALT20/21 Series
Low
85°C,
40+85°C
– 450
Figure 2: Network Capacitor
TNC
is designed
for
most demanding
filtering situations
Part
Number
System
•The
ALC
snap-in
should
bethe
considered
for −40°C
new designs
µF
• Temperature
Range:
and it will redefine performance standards in many non-audio
applications.
ALPFor use in audio amplifi
20A ers, the TNC incorporates
682
current slit
foil
technology
to
produce
the ultimateCapacitance
audio capacitor.
Series
Version
Code (µF)
These capacitors give excellent results against standard
ALP = Solder pin
20A = Standard
components
on tag
a direct 21A
replacement.
However,signifi
TNC
high
ALT = Solder Aluminum
= Threaded Capacitors
cant figures, 3rd digit is
Single-Ended
Electrolytic
frequency performance is
so enhanced
compensation
Mounting
Stud (ALTthat the H.F.number
of zeros
only)resetting for best results.
of test amplifiers may need
AB
010
Size Code
Voltage (VDC)
See Dimension Table
040 = 40
063 = 63
100 = 100
200 = 200
ESK Series, +85ºC
250 = 250
385 = 385
400 = 400
450 = 450
Overview
Applications
Benefi
ts
Part
Number
System
ALP22 and ALT22/23 Series High Ripple 85°C, 40 – 450 VDC
KEMET's ESK Series of single-ended aluminum electrolytic
Typical applications include general purpose coupling,
are tag
designed for high-density printed circuit boards.
decoupling, bypass and filtering.
•capacitors
4 pin Solder
ALP
682
AB
010
22A
Version
Size Code
Voltage (VDC)
• Slit foilSeries
technology
One world.
One KEMET
ALP
=
Solder
pin
22A
=
Standard
First
2
digits
equals
fi
rst
2
See
Dimension
Table
040
=
40
250 = 250
• Specifically designed for audio applications use only.
ALT =Electronics
Solder tag Corporation
23A = •Threaded
significant
digit
is
© KEMET
P.O. Box 5928 • Greenville,
SCfigures,
296063rd
(864)
963-6300
• www.kemet.com
Mounting Stud (ALT
number of zeros
only)
Benefits
063 = 63 A4040_ALP_T20_21
385 = •385
4/16/2015
100 = 100
400 = 400
200 = 200
450 = 450
1
• Operating temperature of up to 85°C
• 2,000 hour operating life
ALN20S Series T-Network
85°C,
50 5&– 100
• Case
diameters
22 mmVDC
System
• µF
Safety
vent on the
capacitor
Capacitance Range: 10,000Part
•Number
Temperature
Range:base
ALN20
S
1053
DD
Series
Construction
Unique Sequential Number
Size Code
Snap-In type Aluminum
S = Slit foil
See Dimension Table
© KEMETElectrolytic
Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
A4046_ALP_T22_23 • 4/16/2015
1
Single-Ended
A4030_ALN20S • 4/16/2015
1
ESK Series General Purpose
85°C, 6.3 – 450 VDC
Part Number System
Capacitance Range: 0.1 to 22,000 µF • Temperature Range: −40°C to +85°C • Lifetime: 2,000 Hours
ESK
226
M
6R3
A
C3
AA
Rated Voltage
(VDC)
Electrical Parameters
Size Code
Packaging
A = Standard
See Dimension
Table
See Ordering
Options Table
Series
Tolerance
Single-Ended
Aluminum
Electrolytic
Digits 4 – 5 represent
the first two digits of the
capacitance value. The final
digit indicates the number of
zeros to be added.
M = ±20%
6R3 = 6.3
010 = 10
016 = 16
025 = 25
035 = 35
050 = 50
063 = 63
100 = 100
160 = 160
200 = 200
250 = 250
350 = 350
400 = 400
450 = 450
16
A4004_ESK • 4/16/2015
1
• Case diameters 5 – 18 mm
Overview
• Safety vent on the capacitor base
Applications
KEMET's ESC Series of single-ended aluminum electrolytic
capacitors are designed for high frequency applications.
Typical applications include high frequency switch mode circuits.
Aluminum Capacitors
Single-Ended (cont.)
Benefits
Single-Ended
ESH Series High CV 105°C,
6.3 – Aluminum
450 VDCElectrolytic Capacitors
System
LowNumber
impedance
Capacitance Range: 0.47 to•Part
15,000
µF • Temperature
ESG
Series,
+105ºC
• Operating temperature of up to +105°C
ESH
107life
• 2,000
– 3,000 hour operating
• Case with Ø D ≥ 6.3 mm
Overview
Series
M
6R3
Tolerance
Rated Voltage
Applications
(VDC)
Single-Ended
4 – 5 representaluminum
M = electrolytic
±20%
6R3 = 6.3
KEMET's
ESG SeriesDigits
of single-ended
Aluminum
010 = 10
capacitors
are designed
for long
lifeThe
(5,000
Electrolytic
capacitance
value.
final hours) and high016 = 16
reliability applications.
digit indicates the number of
025 = 25
zeros to be added.
A
100 = 100
A = Standard
C3
AA
Size Code
Packaging
See Dimension
See Ordering
Typical
applications include electronic ballast
and long-life
160 = 160
Table
Options Table
equipment.
200 = 200
250 = 250
350 = 350
400 = 400
450 = 450
035 = 35
050 = 50
063 = 63
Single-Ended Aluminum Electrolytic Capacitors
Benefits
ESY Series,
ESC Series Low ESR 105°C,
6.3 – 100+105ºC
VDC
Part
Number
System
• Suited
for •long
life,
high reliability
applications
Capacitance Range: 4.7 to 15,000
µF
Temperature
Range:
• Operating temperature of up to +105°C
•Overview
5,000
hour operating life 157
ESC
M
6R3
C3
AA
Applications A
• Case
with
Ø
D
≥
6.3
mm
Series
Tolerance
Rated Voltage (VDC)
Size Code
Packaging
• Safety vent
the capacitor
base aluminum electrolytic
KEMET's
ESYon
Series
of single-ended
include high frequency
switch mode
circuits.
Single-Ended
Digits 4 – 5 represent the first
M = ±20%
6R3 = 6.3 Typical applications
A = Standard
See Dimension
See Ordering
capacitors
are designed
forofvery
low impedance and high ripple
Aluminum
two digits
the capacitance
010 = 10
Table
Options Table
Electrolytic
016 = 16
current
applications.
025 = 25
added.
035 = 35
(864)
963-6300 • www.kemet.com
= 50
063 = 63
100 = 100
A4005_ESH • 4/16/2015
1
Benefits
• Very low impedance
ESG Series High Ripple
Current 105°C, 160 – 450 VDC
PartµF
Number
System
Capacitance Range: 4.7 to 330
• Temperature
• Operating
temperature ofRange:
up to +105°C
• 1,000
– 5,000 hour operating
ESG
336life
• Case with Ø D ≥ 6.3 mm
Series
M
160
A
Tolerance
Rated Voltage (VDC)
Single-Ended
Aluminum
Electrolytic
M = ±20%
160 = 160
A = Standard
two digits of the capacitance
200 = 200
250 = 250
350 = 350
added.
400 = 400
= 450
(864)
H4
AA
Size Code
Packaging
See Dimension
Table
See Ordering
Options Table
A4006_ESC • 4/16/2015
1
ESY Series Low Impedance 105°C, 6.3 – 100 VDC
Part Number
µF • Temperature
ESY
396
M
6R3
A
Rated Voltage (VDC)
Series
Tolerance
Single-Ended
Aluminum
Electrolytic
added.
M = ±20%
6R3 = 6.3
A = Standard
010 = 10
016 = 16
025 = 25
035 = 35
050 = 50
063 = 63
(864)
= 100
B2
AA
Size Code
Packaging
See Dimension
Table
See Ordering
Options Table
A4008_ESG • 4/16/2015
1
17
Overview
Applications
KEMET's EST Series of single-ended aluminum electrolytic
capacitors are designed for low impedance and long life (up to
10,000 hours) applications.
Typical applications include SMPS, power supplies, adaptors,
chargers, monitors and computers.
Aluminum Capacitors
Single-Ended (cont.)
Single-Ended
Benefits Aluminum Electrolytic Capacitors
ESW Series Low Impedance
105°C,System
6.3
– 100 VDC
EAK
Series,
+125ºC
Part Number
• Long life, up to 10,000 hours
• Low impedance
ESW temperature of up
226to +105°C
M
• Operating
Overview
• Case
with Ø D ≥ 6.3
mm
Series
Capacitance
Code (pF)
Tolerance
• Safety
vent on the
capacitor
base the first
Single-Ended
Digitsof4 aluminum
– 5 representelectrolytic
M = ±20%
KEMET's
EAK Series
single-ended
Aluminum
capacitors
are
designed
for
long
life
(up
to
5,000
hours) and
Electrolytic
higher operating temperatures
up to
125°C.
the number ofof
zeros
to be
Capacitance Range: 6.8 to 15,000 µF • Temperature Range: −40°C to +105°C • Lifetime: 5,000 Hours
6R3
A
Applications
Rated Voltage
(VDC)
6R3 = 6.3
010 = 10
016 = 16
025 = 25
035 = 35
050 = 50
063 = 63
100 = 100
added.
C3
AA
Size Code
Packaging
A = Standard
See Dimension
See Ordering
Typical applications
include electronic
ballast and lighting
ballast.
Table
Options Table
Benefits
EST Series Long Life 105°C,
6.3temperature
– 63 VDC
• Operating
of up to +125°C
Part
Number
System
µF
• Temperature
hour
operatingRange:
life
• 2,000
– 5000
EST
157
Series
M
6R3
A
C3
AA
Tolerance
Rated Voltage (VDC)
Size Code
Packaging
See Dimension
Table
See Ordering
Options Table
Single-Ended
Aluminum
Electrolytic
M = ±20%
6R3 = 6.3
A = Standard
010 = 10
016 = 16
025 = 25
added.
035 = 35
(864)
= 50
063 = 63
A4009_ESW • 4/16/2015
1
EAK Series Long Life 125°C, 10 – 63 VDC
Part µF
Number
SystemRange: −40°C to +105°C • Lifetime: 5,000 Hours
• Temperature
EAK
227
Series
Aluminum
Organic Capacitor
Single-Ended
Digits 4 (AO-CAP)
– 5 represent the first
A700Aluminum
Series Polymer Aluminum
Electrolytic
SPICE
added.
M
010
A
Tolerance
Rated Voltage (VDC)
010 = 10
A = Standard
016 = 16
025 = 25
035 = 35
050 = 50
063 = 63
Surface Mount
AA
G3
M = ±20%
Size Code
Packaging
See Dimension
Table
See Ordering
Options Table
A4010_EST • 4/16/2015
For a detailed analysis of specific part numbers, please visit www.kemet.com for a free download of KEMET's SPICE software.
The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over
frequency, temperature, ripple, and DC bias conditions.
1
A700 Series Polymer Aluminum 125°C, 2 – 16 VDC
Ordering
Information
µF • Temperature
A
Capacitor
Class
700
Series
V
476
M
006
A
T
E018
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance
Rated Voltage
(VDC)
Failure Rate/
Design
Termination
Finish
ESR Code
A=
700 =
D, V, X
First two digits M = ±20%
002 = 2
A = N/A
Aluminum
Aluminum
represent
2R5 = 2.5
Polymer
cant SC 29606 (864) 963-6300
004 = 4 • www.kemet.com
© KEMET Electronics
Corporation • P.O. Box 5928 •signifi
Greenville,
figures. Third
006 = 6.3
digit specifies
008 = 8
number of
010 = 10
zeros.
12R = 12.5
016 = 16
T = 100%
Matte Tin
(Sn) plated
Performance Characteristics
18
Item
Operating Temperature
-55°C to 125°C
Packaging
(C-Spec)
E = ESR
Blank = 7"
Onethree
world. One
Last
ReelKEMET
digits
specify • 4/16/2015
7280 = 13" 1
A4047_EAK
ESR in mΩ
Reel
(018 = 18
mΩ)
KEMET's EDK Series of aluminum electrolytic surface mount
capacitors are designed for high density printed circuit boards.
Typical applications include coupling, decoupling, bypass, and
filtering.
Aluminum Capacitors
Surface Mount Aluminum Electrolytic Capacitors
Benefits
Surface Mount (cont.)
EEV Series, +105ºC
• Surface 105°C,
mount lead6.3
terminals
EDH Series General Purpose
– 100 VDC
System
LowNumber
profi
vertical
chip Range: −40°C to +105°C • Lifetime: 2,000 Hours
Capacitance Range: 1.0 to •Part
1,500
µF •leTemperature
• General purpose +85°C/2,000 hours
Overview
Applications
EDH
226
M
6R3
A
9B
AA
KEMET's EEV Series of aluminum electrolytic surface mountRated Voltage
Typical applications include audio/visual (AV), computer/monitor,
Series
Tolerance
Size Code
Packaging
capacitors
are designed
for applications requiring
ultra-low
(VDC) communications, and switch mode power supplies (SMPS).
Surface Mount
represent
050 = 50
A = Standard
See Dimension
AA = T&R
impedance
and a lowDigits
profi4le– 5vertical
chip. M = ±20% 6R3 = 6.3
Aluminum
Electrolytic
Surface Mount
Benefits
final digit indicates the
number of zeros to be
Aluminumadded.
Electrolytic
EXV Series, +105ºC
Capacitors
010 = 10
016 = 16
025 = 25
035 = 35
063 = 63
100 = 100
Table
• Surface mount lead terminals
EDK Series General Purpose
4 chip
– 100 VDC
• Low profi85°C,
le vertical
Number
Capacitance Range: 0.1 to Part
µF •impedance
Temperature
•1,000
Ultra-low
Overview
Applications
• +105°C/2,000 hours
EDK
226
M
004
A
9B
AA
KEMET's EXV Series of aluminum electrolytic surface mount
Typical applications include audio/visual (AV), computer/monitor,
Series
Capacitance
Code
(pF)
Tolerance
Rated
Voltage
(VDC)
Electrical
Parameters
Size
Code
Packaging
capacitors are designed for applications requiring ultra-low
communications, and switch mode power supplies (SMPS).
Surface Mount
represent
050 = 50
A = Standard
See Dimension
AA = Tape & Reel
impedance
and a lowDigits
profi4le– 5vertical
chip. M = ±20% 004 = 4
Aluminum
Electrolytic
added.
6R3 = 6.3
010 = 10
016 = 16
025 = 25
035 = 35
063 = 63
100 = 100
Table
Benefi
©
KEMET ts
A4049_EDH • 4/16/2015
1
• Surface mount lead terminals
EEV Series Ultra-Low Impedance
105°C, 6.3 – 50 VDC
• Low profile vertical chip
Number
µF •impedance
Temperature
•1,500
Ultra-low
• +105°C/3,000
– 5,000 hours
EEV
226
M
Series
Tolerance
Surface Mount
Aluminum
Electrolytic
added.
M = ±20%
6R3
A
Rated Voltage (VDC)
Size Code
Packaging
A = Standard
See Dimension Table
AA = Tape & Reel
6R3 = 6.3
010 = 10
016 = 16
025 = 25
035 = 35
050 = 50
9B
AA
A4001_EDK • 4/16/2015
1
EXV Series Ultra-Low Impedance 105°C, 6.3 – 50 VDC
PartµF
Number
SystemRange: −40°C to +105°C • Lifetime: 5,000 Hours
• Temperature
EXV
226
Series
Surface Mount
Aluminum
Electrolytic
added.
M
6R3
A
9B
AA
Tolerance
Rated Voltage (VDC)
Size Code
Packaging
M = ±20%
6R3 = 6.3
010 = 10
016 = 16
025 = 25
035 = 35
050 = 50
A = Standard
See Dimension
Table
AA = Tape & Reel
A4002_EEV • 4/16/2015
A4003_EXV • 4/16/2015
1
19
1
• VDE approved to IEC 60252–2
Aluminum Capacitors
Motor Start
MS/MD Series 60ºC/70°C, 120 – 260 VAC
PartµFNumber
System
Capacitance Range: 25 to 750
• Temperature
Range: MS: −20°C to +60°C, MD: −20°C to +70°C • Lifetime: 500 Hours
080
Capacitance Code
(µF)
Example:
080 = 80 µF
120 = 120 µF
MS
Rating
MS = Motor start
single rating
MD = Motor start
dual rating
12
Voltage (VAC)
12 = 120
22 = 220
26 = 260
AA
M
A
1
STD
Size Code
Manufacturing
Style
Capacitance
Tolerance
Terminal Code
Version
A = -0% +25%
K = ±10%
1 = Double amp
tag
STD = Standard
See Dimension
Table
M = Molded case
20
A4041_MS_MD • 4/16/2015
1
Ceramic Capacitors
CERAMIC SURFACE MOUNT CAPACITORS
SnPb End
Metallization
Bulk
Capacitance
High
Temperature
(> 125°C)
High
Voltage
(> 500 V)
Aerospace &
Defense
RF &
Microwave
CBR Series Ultra High Q
C0G
6.3 – 500 VDC
Commercial
Grade
Flex
Mitigation
Automotive
Grade
High Reliability
Commercial
Off-the-Shelf
(COTS)
C0G
10 – 250 VDC
Open Mode Design
X7R
16 – 200 VDC
C0G
10 – 250 VDC
C0G
10 – 250 VDC
C0G
10 – 250 VDC
KPS
X7R
10 – 250 VDC
150°C
X8R
25 –100 VDC
ArcShieldTM Technology
X7R
500 – 1,000 VDC
MIL-PRF-123
BP & BX
6.3 – 200 VDC
X7R
6.3 – 250 VDC
Floating Electrode
X7R
6.3 – 250 VDC
X7R
6.3 – 250 VDC
X7R
6.3 – 250 VDC
X7R
6.3 – 250 VDC
KPS High Voltage
X7R
500 – 630 VDC
150°C
X8L
10 –50 VDC
C0G
500 – 3,000 VDC
GR900
BP & BX
16 – 200 VDC
X5R
4 – 50 VDC
Flexible Termination
C0G
10 – 250 VDC
Capacitor Array
C0G
10 – 200 VDC
COTS
C0G
10 – 200 VDC
KPS High
Temperature 150°C
X8L
10 – 50 VDC
200°C
C0G
10 – 200 VDC
X7R
500 – 3,000 VDC
MIL-PRF-55681
BP & BX
50 – 100 VDC
Z5U
50 VDC & 100 VDC
X7R
6.3 – 250 VDC
Capacitor Array
X7R
10 – 200 VDC
COTS
X7R
6.3 – 250 VDC
KPS MIL Series
50 – 1,000 VDC
HV-HT Series 200°C
C0G
500 – 2,000 VDC
C0G
500 – 3,000 VDC
DLA 03028
BR & BX
6.3 – 200 VDC
Y5V
6.3 – 50 VDC
High Voltage Flexible
Termination
C0G
500 – 3,000 VDC
Open Mode Design
X7R
16 – 200 VDC
High Temperature
X8R
25 – 100 VDC
150°C
X8R
25 – 100 VDC
X7R
500 – 3,000 VDC
DLA 03029
BR & BX
6.3 – 100 VDC
Telecom "Tip & Ring"
X7R
250 VDC
Termination
X7R
500 – 3,000 VDC
Floating Electrode
X7R
6.3 – 250 VDC
High Temperature
X8L
10 – 50 VDC
175°C
X7R
16 – 200 VDC
KPS
X7R
500 – 630 VDC
DLA 05006
BP, BR & BX
10 – 200 VDC
Capacitor Array
C0G
10 – 200 VDC
X8R
25 – 100 VDC
X7R
6.3 – 250 VDC
Telecom "Tip & Ring"
X7R
250 VDC
KPS 150°C
X8L
10 VDC – 50 VDC
HV-HT Series 200°C
C0G
500 – 2,000 VDC
DLA 05007
BP, BR & BX
10 – 200 VDC
Capacitor Array
X7R
10 – 200 VDC
Floating Electrode w/
X7R
6.3 – 250 VDC
KPS
X7R
10 – 250 VDC
Open Mode Design
X7R
16 – 200 VDC
200°C High Voltage
Pulse Discharge
C0G
500 – 2,000 VDC
200°C High Voltage
Pulse Discharge
C0G
500 – 2,000 VDC
DLA 91019
BR
25 – 50 VDC
KPS
X7R
10 – 250 VDC
High Voltage
X7R
500 – 3,000 VDC
Floating Electrode
X7R
6.3 – 250 VDC
KPS HV Large Case
C0G
500 – 10K VDC
KPS High Voltage
X7R
500 – 630 VDC
KPS High Voltage
X7R
500 – 630 VDC
X7R
6.3 – 250 VDC
KPS HV Large Case
X7R
500 – 10K VDC
KPS High
Temperature 150°C
X8L
10 – 50 VDC
KPS High
Temperature 150°C
X8L
10 – 50 VDC
X7R
6.3 – 250 VDC
C0G
10 – 250 VDC
X8R
25 – 100 VDC
X7R
6.3 – 250 VDC
CERAMIC THROUGH-HOLE CAPACITORS
mmercial
Grade
Aximax
X7R & Z5U
formally Coated
250 VDC
ies Goldmax
X7R & Z5U
nformally Coated
250 VDC
Axial & Radial
G & X7R
200 VDC
High
Temperature
(> 125°C)
High
Voltage
(> 500 V)
HT 200°C
C0G & X7R
Radial Molded
50 – 200 VDC
HV 300 Series Goldmax
C0G & X7R
HT/HP 200°C
C0G & X7R
Axial & Radial
25 – 200 VDC
C0G & X7R
HV 200°C
C0G & X7R
HV
C0G & X7R
Radial Conformally Coated
500 – 4,000 VDC
ACR/ACA 200°C
Axial & Radial
C0G
50 – 100 VDC
ARR/ARA 200°C
Axial & Radial
X7R
50 – 100 VDC
TCR/TCA 260°C
Axial & Radial
C0G
50 – 100 VDC
TRR/TRA 260°C
Axial & Radial
X7R
50 – 100 VDC
VCR 200°C
Axial & Radial
C0G
500 – 5,000 VDC
VRR 200°C
Axial & Radial
X7R
500 – 5,000 VDC
Aximax 150°C
X8L & X8R
Molded Axial
25 – 200 VDC
22
500 – 3,000 VDC
500 – 3,000 VDC
500 –10,000 VDC
CERAMIC DISC CAPACITORS
Aerospace
&Temperature
High
Defense X8R
Safety
Commercial
Grade
High Temperature
MIL-PRF-123
150°C
BP & BX
X8L
Molded Radial
50 – 100 VDC 10 – 50 VDC
900
Radial Encapsulated
AC Type
X1 400 VAC/Y2 250 VAC
KHA
X7R
1,000 – 2,000 VDC
900
Radial Encapsulated
AC Type
X1 440 VAC/Y2 300 VAC
KHB
Y5P
1,000 – 2,000 VDC
25 – 100 VDC
GR900 High Reliability
High Voltage
BP & BX
X7R
Molded Radial
500 – 3,000 VDC
50 – 200 VDC
MIL-PRF-20
Termination
CG
Molded Axial & Radial C0G
500 – 3,000 VDC
50 – 200 VDC
MIL-C-11015/
MIL-PRF-39014
BX & BR
Molded Axial
50 – 100 VDC
MIL-C-11015/
MIL-PRF-39014
BX (X7R)
Molded Radial
50 – 200 VDC
HV
MIL-PRF-46467 Equivalent
BP, BR & BZ
500 – 5,000 VDC
HS High Voltage
Space Quality
C0G & X7R
500 – 10,000 VDC
SCR/SCA Standard
Axial & Radial
C0G
50 – 200 VDC
SRR/SRA Standard
Axial & Radial
X7R
50 – 200 VDC
900
Radial Encapsulated
AS Type
X1 760 VAC/Y1 500 VAC
KHC
SL
1,000 – 2,000 VDC
CERAMIC THROUGH-HOLE CAPACITORS
Commercial
Grade
Aximax
C0G, X7R & Z5U
Axial Conformally Coated
25 – 250 VDC
300 Series Goldmax
C0G, X7R & Z5U
25 – 250 VDC
Molded Axial & Radial
C0G & X7R
50 – 200 VDC
High
Temperature
(> 125°C)
High
Voltage
(> 500 V)
HT 200°C
C0G & X7R
Radial Molded
50 – 200 VDC
C0G & X7R
HT/HP 200°C
C0G & X7R
Axial & Radial
25 – 200 VDC
C0G & X7R
HV 200°C
C0G & X7R
HV
C0G & X7R
500 – 4,000 VDC
900
Radial Encapsulated
AH Type
X1 400 VAC/Y1 250 VAC
ACR/ACA 200°C
Axial & Radial
C0G
50 – 100 VDC
900
Radial Encasulated
AH Type
X1 400 VAC/Y1 400 VAC
ARR/ARA 200°C
Axial & Radial
X7R
50 – 100 VDC
ERO610
Radial AC Type
X1 440 VAC/Y2 250 VAC
TCR/TCA 260°C
Axial & Radial
C0G
50 – 100 VDC
ERK610
Radial AC Type
X1 440 VAC/Y2 300 VAC
TRR/TRA 260°C
Axial & Radial
X7R
50 – 100 VDC
ERP610
Radial AC Type
X1 760 VAC/Y2 500 VAC
VCR 200°C
Axial & Radial
C0G
500 – 5,000 VDC
KJN
Y5P, Y5U & Y5V
Y1 250/400 VAC/
X1 440 VAC
VRR 200°C
Axial & Radial
X7R
500 – 5,000 VDC
KJY
Y5P, Y5U & Y5V
Y2 250 VAC/
X1 400 VAC
Aximax 150°C
X8L & X8R
Molded Axial
25 – 200 VDC
500 – 3,000 VDC
500 – 3,000 VDC
500 –10,000 VDC
C
Aerospace &
Defense
MIL-PRF-123
BP & BX
Molded Radial
50 – 100 VDC
X
GR900 High Reliability
BP & BX
Molded Radial
50 – 200 VDC
X
MIL-PRF-20
CG
Molded Axial & Radial
50 – 200 VDC
X
MIL-C-11015/
MIL-PRF-39014
BX & BR
Molded Axial
50 – 100 VDC
MIL-C-11015/
MIL-PRF-39014
BX (X7R)
Molded Radial
50 – 200 VDC
HV
MIL-PRF-46467 Equivalent
X
X
X
BP, BR & BZ
500 – 5,000 VDC
HS High Voltage
Space Quality
C0G & X7R
X
500 – 10,000 VDC
SCR/SCA Standard
Axial & Radial
C0G
50 – 200 VDC
SRR/SRA Standard
Axial & Radial
X7R
50 – 200 VDC
X
• DC voltage ratings of 10 V, 16 V, 25 V, 50 V, 100 V, 200 V and 250 V
X7R dielectric
a 125°C
maximum
operating
for frequency discriminating circuits where Q and stability of
•KEMET’s
Capacitance
offerings features
ranging from
0.5 pF
up to 0.47
μF
and is considered
“temperature
stable.”
capacitance characteristics are not critical. X7R exhibits a
•temperature
Available capacitance
tolerances
of ±0.10 pF,
±0.25The
pF, ±0.5
Electronics
Components,
Assemblies
& Materials Association
predictable change in capacitance with respect to time and
pF, ±1%, ±2%,
±5%, ±10%,
and ±20%
characterizesnoise
X7R dielectric as a Class II material.
voltage and boasts a minimal change in capacitance with
•(EIA)
No piezoelectric
of this
classifi
cation are fixed, ceramic dielectric
reference to ambient temperature. Capacitance change is limited
•Components
Extremely low
ESR
and ESL
suitedstability
for bypass and decoupling applications or
to ±15% from -55°C to +125°C.
•capacitors
High thermal
• High ripple
current
capability
Surface
Mount
Multilayer
Ceramic Chip Capacitors (SMD MLCCs)
Ceramic Capacitors
Surface Mount
Commercial Grade
X5R Dielectric, 4 – 50 VDC (Commercial Grade)
Benefi
C0G Dielectric, 10 – 250
VDCts
Applications
Information
Capacitance Range: 0.50 pFOrdering
to 0.47toµF
• Temperature
Range: −55°C
• -55°C
+125°C
operating temperature
range to +125°C
Overview
Typical applications include decoupling, bypass, filtering and
transient voltage suppression.
• Lead (Pb)-Free, RoHS, and REACH Compliant
C
1206
C
104
J
3
G
A
C
TU
•KEMET’s
Temperature
stable
dielectric
X5R dielectric features an 85°C
maximum operating
discriminating circuits Failure
whereRate/
Q and stability of capacitance
Case Size Specification/
Capacitance
Capacitance Rated Voltage
Packaging/Grade
•Ceramic
EIA 0402, and
0603, 0805, 1206,
1210, 1808, 1812,
1825, 2220, 2 characteristics
Dielectric
Termination Finish3
4
temperature
The Electronics
are not critical.
change
(L" x W")is considered
Series1 “semi-stable.”
Code (pF)
Tolerance
(VDC)
Design X5R exhibits a predictable
(C-Spec)
and
2225
case
sizes
Components,
Assemblies
&
Materials
Association
(EIA)
in
capacitance
with
respect
to
time
and
voltage
and
boasts
0201
C = Standard 2 significant digits +
B = ±0.10 pF
8 = 10
G = C0G A = N/A
C = 100% Matte Sn Blank = Bulk
• DC voltage
ratings
of 6.3 V,as10a V,
16 V,II 25
V, 35 V,
50C =V,±0.25
100 pF
V, a4 =minimal
characterizes
X5R
dielectric
Class
material.
Components
change in capacitance with reference to ambient
0402
number
of zeros.
16
TU = 7" Reel
V, and
250 V are fixed, ceramic
0603
Use 9 dielectric
for 1.0 – 9.9capacitors
pF D = ±0.5 pF
3 = 25
of 200
this classifi
cation
temperature.
Capacitance change is limited to ±15%Unmarked
from -55°C
0805offerings ranging from
Use 810
for pF
0.5 to
– .99
pF
F = ±1%
5 = 50
• Capacitance
47for
μFfrequency
suited
for bypass
and
decoupling
applications
or
to
+85°C.
2.2 pF = 229
= ±2%
1 = 100
1206
• Available
capacitance tolerances e.g.,
ofChip
±5%,
±10%, andG(SMD
±20%
Surface
Mount
Capacitors
e.g.,
0.5 pF
= 508
J = ±5% MLCCs)
2 = 200
1210 Multilayer Ceramic
• Non-polar1808
device, minimizing installation concerns K = ±10%
A = 250
1812
M =for±20%
• 100% pure
matte tin-plated termination finish allowing
excellent 1825
solderability
Applications
Benefi
ts 2220 finish option available upon request
• SnPb termination
2225
Overview
(5% minimum)
1
Typical applications include decoupling, bypass, and filtering.
• Flexible
-55°Ctermination
to +85°Coption
operating
temperature
range
is available.
Please see
FT-CAP product bulletin C1062_C0G_FT-CAP_SMD
2
Additional
capacitance
tolerance
offerings
may
be available. Contact KEMET for details.
•
Lead
(Pb)-Free,
RoHS
and
REACH
compliant
KEMET’s
Z5U dielectric features an 85°C maximum
applications in which dielectric losses, high insulation resistance
X7R Dielectric, 6.3 – 250
VDCtermination
3
Additional
finish
options may be available. Contact KEMET for details.
Information
•4Ordering
Temperature
stable
dielectric
operating
temperature
and
is
considered
“general-purpose.”
and capacitance stability are not of major importance. Z5U exhibits
Capacitance Range: 10 pF toAdditional
47 µFreeling
• Temperature
Range:
to +125°C
or packaging options
may −55°C
be available.
Contact KEMET for details.
•The
EIAElectronics
0201, 0402,
0603, 0805,Assemblies
1206, 1210,&and
1812 case sizes
Components,
Materials
a predictable change in capacitance with respect to time and
•Association
DC
ratings
of 4 V,
10 dielectric
V,106
16 V, 25
V,
(EIA)
characterizes
Z5U
asV,a 35
Class
III 50 V voltage
and displays
wide variations
in capacitance
with reference
C voltage
1206
C 6.3 V,
M and
4
R
A
C
TU
©
KEMET
Electronics
Corporation
•
P.O.
Box
5928
•
Greenville,
SC
29606
(864)
963-6300
•
www.kemet.com
C1003_C0G
• 4/16/2015
1
•material.
Capacitance
offerings
ranging
fromcation
0.01 are
μF to
100 ceramic
μF
Components
of
this
classifi
fi
xed,
to
ambient
temperature.
Capacitance
change
is
limited
to +22%,
Capacitance
Failure Rate/
Termination
Packaging/
Ceramic
Dielectric
•dielectric
Available
capacitance
tolerances
of
±10%
and
±20%
capacitors
for1 bypassCode
and(pF)
decoupling
or other
-56% from +10°C to +85°C.Design
(L" x W") suited
Series
Tolerance
(VDC)
Finish2
Grade (C-Spec)3
• Non-polar0402
device, minimizing
installation concerns
C = Standard Two significant J = ±5%
9 = 6.3
R = X7R
A = N/A
C = 100%
Blank = Bulk
• 100% pure
matte tin-plated termination
for
0603
digitsfi+nish allowing
K = ±10%
8 = 10
Matte Sn
TU = 7" Reel
0805
number of
M = ±20%
4 = 16
Unmarked
excellent solderability
Z5U Dielectric, 50 – 100 VDC (Commercial Grade)
zeros.
1206
Benefits 1210
3 = 25
TM = 7" Reel
6 = 35Applications
Marked
5 = 50
1 = 100
Typical applications include limited temperature, decoupling and
2 = 200
bypass.
A = 250
1808
1812
+10°C to +85°C
1825 operating temperature range
Lead (Pb)-Free,
2220 RoHS and REACH compliant
EIA 0805,2225
1206, 1210, 1812, 1825, and 2225 case sizes
•
•
•
•1 Flexible
DC voltage
ratings
of is50available.
and 100
V see FT-CAP product bulletin C1013_X7R_FT-CAP_SMD.
termination
option
Please
2
termination
finish options
be available.
• Additional
Capacitance
offerings
rangingmay
from
6,800 pFContact
to 2.2KEMET
μF for details.
X5R Dielectric, 4 – 50 VDC
3
reeling
or packaging
options may
available.
• Additional
Available
capacitance
tolerances
of be
±20%
and Contact
+80%/ KEMET
-20% for details.
Ordering
Information
Capacitance Range: 0.01 μF3 The
to terms
100 "Marked"
μF • Temperature
−55°C
to +85°C
and "Unmarked"Range:
pertain to laser
marking
option of components.
• Non-polar
device,
minimizing installation
concerns
• 100%
matte tin-plated
C pure1206
C termination
107finish allowing
M for
9
P
A
© KEMET
Electronics
excellent
solderability
Case Size Specification/ Capacitance
Failure Rate/
Ceramic
(L" x W")
Series
Code (pF)
0201
0402
0603
0805
1206
1210
1812
C = Standard
Two
significant
digits +
number of
zeros.
Tolerance
K = ±10%
M = ±20%
(VDC)
7=4
9 = 6.3
8 = 10
4 = 16
3 = 25
6 = 35
5 = 50
Dielectric
P = X5R
Design
A = N/A
C
TU
C1002_X7R_SMD • 4/16/2015
1
Termination
Packaging/Grade
Finish1
(C–Spec)2
C = 100%
Matte Sn
Blank = Bulk
TU = 7" Reel
Unmarked
TM = 7" Reel
Marked
Additional termination finish options may be available. Contact KEMET for details.
Additional reeling or packaging options may be available. Contact KEMET for details.
2
The terms "Marked"
and "Unmarked" pertain to laser marking option of components.
Ordering
Information
1
Z5U Dielectric, 50 & 100 VDC
2
Capacitance Range: 6,800 pF to 2.2 μF • Temperature Range: −10°C to +85°C
C Electronics
1825 Corporation
C • P.O. Box 5928225
M (864) 963-6300
5 • www.kemet.com
U
© KEMET
Case Size
Ceramic
(L" x W")
0805
1206
1210
1812
1825
2225
Specification/
Series
Capacitance
Code (pF)
Capacitance
Tolerance
C = Standard
2 significant digits
+ number of zeros
M = ±20%
Z = +80%/ -20
A
C
TU
C1006_X5R_SMD
• 4/16/2015
1
Rated Voltage
Failure Rate/
Packaging/Grade
Dielectric
Termination Finish2
(VDC)
Design
(C-Spec)2
5 = 50
1 = 100
U = Z5U
A = N/A
C = 100% Matte Sn Blank = Bulk
TU = 7" Reel
Unmarked
TM = 7" Reel
Marked
2
The terms "Marked" and "Unmarked" pertain to laser marking option of components.
1
2
23
C1004_Z5U_SMD • 4/16/2015
1
filmexcellent
devices,solderability
these smaller surface mount technology footprints
save valuable board space which is critical when creating new
designs.
and voltage and boasts a minimal change in capacitance with
to ±15% from -55°C to +125°C.
KEMET Tip and Ring capacitors feature a 125°C maximum
operating temperature and are considered “temperature
stable.” The Electronics Components, Assemblies & Materials
Association (EIA) characterizes X7R dielectric as a Class II
These devices are able to withstand today’s higher lead-free reflow
processing temperatures and offer superior high frequency filtering
characteristics and low ESR.
Ceramic Capacitors
Surface Mount
Commercial Grade (cont.)
Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
Y5V Dielectric, 6.3 – 50Surface
VDC ts
Benefi
Ordering
Capacitance Range: 0.022 μF
to 22 μFInformation
• Temperature
Range:
−30°C to +85°C
Capacitor
Array, C0G
Dielectric,
10
– 200 VDC
• -55°C to +125°C operating temperature range
C (Pb)-Free,
1210 RoHS and
C REACH compliant
226
Z
4
V
A
C
TU
• Lead
Case
Size 1210,
Specifi
cation/
• Ceramic
EIA 0805,
1206,
1812,
1825, Capacitance
2220, and 2225 Capacitance
case sizes Rated Voltage Dielectric Failure Rate/ Termination Finish1 Packaging/Grade
(L" xrating
W") of 250
Series
Code (pF)
Tolerance
(VDC)
Design
(C-Spec)2
• DC voltage
V
Z
=
+80%/
-20%
9
=
6.3
V
=
Y5V
A
=
N/A
C
=
100%
Matte
Blank
= Bulk
0402
C
=
Standard
2
signifi
cant
digits
• Capacitance offerings ranging from 1,000 pF to 6.8 μF
Overview
+ number of zeros M = ±20%
8 = 10
Sn
TU = 7" Reel
0603
• Available capacitance
tolerances
of
±10%
and
±20%
4 = 16
Unmarked
0805
KEMET’s Ceramic
3time
= 25and voltage and boasts a negligible change in capacitance
1206 Chip Capacitor Array in C0G dielectric is an
5with
= 50reference to ambient temperature. Capacitance change is
1210 technology where multiple capacitor elements
advanced passive
are
integrated into one common monolithic structure. Array
limited to ±30 ppm/ºC from -55°C to +125°C.
1
technology
promotes
reduced
placement
costs
and
increased
Surface
Ceramic
Capacitors
(SMD
2
AdditionalMount
reeling
orMultilayer
packaging
options
may Chip
be available.
Contact
KEMET MLCCs)
for details.
2
throughput.
This isand
achieved
by VDC
alternatively
KEMET automotive grade array capacitors meet the demanding
TheX7R
terms "Marked"
"Unmarked"
pertain to laserplacing
marking one
optiondevice
of components.
Telecom “Tip and Ring”
Dielectric,
250
rather
than
two
or
four
discrete
devices.
Use
of
capacitor
arrays
Automotive Electronics Council's AEC–Q200 qualification
Ordering
Information
Capacitance Range: 180 pF to 1.2 μF • Temperature Range: −55°C to +125°C
also saves board space which translates into increased board
requirements.
density
more functions
board.
Arrays
consume
C and
1825
C per
105
K (864) 963-6300
A • www.kemet.com
R
A
C
TU
© KEMET
Electronics
Corporation
• P.O.
Box 5928
• Greenville,
SConly
29606
C1005_Y5V_SMD
• 4/16/2015
1
a portion ofCase
theSize
spaceSpecifi
required
for
standard
chips
resulting
in
cation/
Capacitance
Failure Rate/
Packaging/Grade
Ceramicin inventory and pick/place machine positions.
Dielectric
Termination Finish1
savings
(L" x W")
Series
Code (pF)
Tolerance
(VDC)
Design
(C-Spec)2
(Commercial & Automotive Grade)
Capacitor Array, X7R Dielectric, 10 – 200 VDC
Overview
0805
C = Standard
2 significant digits +
J = ±5%
A = 250
R = X7R
A = N/A
C = 100% Matte Sn
Blank = Bulk
KEMET’s C0G
dielectric
features a 125°C
1206
X = Flexible
numbermaximum
of zeros operating
K = ±10%
L = SnPb (5% Pb
TU = 7" Reel
KEMET’s Ceramic
Chip
Capacitor Array in X7R dielectric
is an
respect to time and voltage and boasts
a minimal change
in
Termination
minimum)
Unmarked
temperature 1210
and is considered
“stable.”The ElectronicsM = ±20%
advanced passive
capacitance with reference to ambient temperature. Capacitance
1812 technology where multiple capacitor elements
TM = 7" Reel
Industries Alliance
(EIA) characterizes C0G dielectric as a Class
1825
are integrated
into one common monolithic structure. Array
change is limited to ±15% from -55°C to +125°C. Marked
I material. Components
of this classification are temperature
2220
technology promotes
reduced
placement
costs
and
increased
2225
compensating
and are suited for resonant circuit applications
throughput. This is achieved by alternatively placing one device
1or those where Q and stability of capacitance characteristics are
rather
than
two
or
four
discrete
devices.
Use
of
capacitor
arrays
2required. C0G exhibits no change in capacitance with respect to
requirements.
Capacitor Array, C0G Dielectric,
10functions
– 200 per
VDC
density and more
board. Arrays consume only
Information
Capacitance Range: 10 pF aOrdering
toKEMET
2,200Electronics
Range:
+125°C
©
Corporation
• P.O.
Box
5928−55°C
• Greenville,
SC 29606
C1011_X7R_TIP_RING_SMD • 4/16/2015
1
portion
ofpFthe• Temperature
space
required
for
standard
chipsto
resulting
in (864) 963-6300 • www.kemet.com
savings in inventory and pick/place machine positions.
4
104
K
4
G
A
C
TU
CA
06
C
Ceramic Case
Number
of Specifi
cation/ maximum
Capacitance
Capacitance
KEMET’s
X7RSize
dielectric
features
a 125°C
operating
Array
(L" x W")1 Capacitors
Series
Code (pF)
temperature
and is considered “temperature
stable.”
The Tolerance
05Industries
= 0508 2 Alliance
=2
C = Standard
2 signifiX7R
cant dielectric
J = ±5%
Electronics
(EIA)
characterizes
06 = 0612 4 = 4
X = Flexible
digits +
K = ±10%
as a Class II material. Components
of this classifi
cation
Termination
number
of are
M = ±20%
fixed, ceramic dielectric capacitors suited for bypass
zeros and
decoupling applications or for frequency discriminating circuits
where Q and stability of capacitance characteristics are not
critical. X7R exhibits a predictable change in capacitance with
Rated Voltage
Failure Rate/ Termination
Dielectric
(VDC)
Design
Finish2
8 = 10
4 = 16
3 = 25
5 = 50
1 = 100
2 = 200
G = C0G
A = N/A
C = 100%
Matte Sn
L = SnPb (5%
minimum)
Packaging/Grade
(C-Spec)3
Blank = Bulk Bag
(Commercial Grade)
TU = 7" Tape & Reel
(Commercial Grade)
AUTO = 7" Reel
(Automotive Grade)
AUTO 7411 = 13"
Reel/Punched Paper
(Automotive Grade)
AUTO 7210 = 13" Reel/
Embossed Plastic
(Automotive Grade)
All previous reference to metric case dimension "1632" has been replaced with an inch standard reference of "0612". Please reference all new designs using the
"0612" nomenclature. "CA064" replaces "C1632" in the ordering code.
2
Ordering
Information
2,3
SnPb
termination
finish option is notRange:
available on
automotive
grade product.
pF3 to
0.22
μF • Temperature
−55°C
to +125°C
3
Reeling
on capacitor
dimension.
Quantities"
CA tape options
C
4
R See "Chip AThickness/Packaging
C
TU and
06 (Paper or4Plastic) are dependent
104 case size (L"x
K W") and thickness
"Tape & Reel Packaging Information" sections of this document.
Packaging/
3Ceramic
Number
Specifi
cation/options,
Capacitance
Capacitance
Rated Voltage
Case
Size
For additional
Information
regardingof"AUTO"
C-Spec
see "Automotive
C-Spec Information"
section
of this document.
Dielectric
Grade
Design
Finish2
Capacitors
Series
Code (pF)
Tolerance
(VDC)
Array
(L" x W")1
3
(C-Spec)
One world. One
KEMET
1
Capacitor Array, X7R Dielectric, 10 – 200 VDC
Capacitance Range: 330
• Greenville,
SCcant
29606J(864)
963-63008 •=www.kemet.com
05 = 0508 Corporation
2 = 2 • P.O. Box
C =5928
Standard
2 signifi
= ±5%
10
R = X7R
06 = 0612
4=4
X = Flexible
digits +
K = ±10%
4 = 16
Termination
number of
M = ±20%
3 = 25
zeros
5 = 50
1 = 100
2 = 200
"0612" nomenclature. "CA064" replaces "C1632" in the ordering code.
2
2,3
SnPb termination finish option is not available on automotive grade product.
3
1
24
C1016_C0G_ARRAY_SMD
1
A = N/A
C = 100% • 4/16/2015
See
Matte Sn
"Packaging
L = SnPb
C-Spec
(5%
Ordering
minimum) Options Table"
below
filters) and general electronic applications.
single monolithic structure. This unique configuration results in
enhanced voltage and ESD performance over standard capacitor
Concerned with flex cracks resulting from excessive tensile
designs while allowing for a fail-open condition if mechanically
and shear stresses produced during board flexure and thermal
damaged (cracked). If damaged, the device may experience
cycling? These devices are available with KEMET's Flexible
a drop in capacitance but a short is unlikely. The FE-CAP is
termination technology which inhibits the transfer of board
designed to reduce the likelihood of a low IR or short circuit
stress to the rigid ceramic body, therefore mitigating flex cracks
condition and the chance for a catastrophic and potentially costly
which can result in low IR or short circuit failures. Although flexfailure event.
ible termination technology does not eliminate the potential for
values. These devices exhibit a predictable change in capacitance
with respect to time and voltage and boast a minimal change in
change is limited to ±15% from -55°C to +125°C.
Ceramic Capacitors
Surface Mount
Flex Mitigation
In addition to Commercial Grade, Automotive Grade devices
are available which meet the demanding Automotive Electronics
Council's AEC–Q200 qualification requirements.
Driven
the
demand
for a Ceramic
more robust
reliable
Open Mode Design (FO-CAP),
X7R
Dielectric,
16Chip
– and
200
VDCcomponent,
(Commercial
SurfacebyMount
Multilayer
Capacitors
(SMD MLCCs) & Automotive Grade)
the to
FE-CAP
designed for critical
applications
where
Ordering
Information
Capacitance Range: 1,000 pF
6.8 μFwas
• Temperature
Range:
−55°C to
+125°C
Flexible
Termination
System
(FT-CAP),
C0G Dielectric,
higher
operating
temperatures and mechanical
stress
are a
concern.
These
capacitors
are
manufactured
in
state
of
the
art
C– 250
1210
J
685 & Automotive
K
3Grade)R
10
VDC (Commercial
ISO/TS 16949:2009 certified facilities and are widely used in
Capacitance
Ceramic
power
supplies
(input andSeries
output filters)Code
and general
electronic
(L" x W")
(pF)
Tolerance
(VDC)
applications.0805
Overview
F = Open Mode Two significant
K = ±10%
1206
J = Open Mode digits + number of M = ±20%
1210
with Flexible
zeros
KEMET’s Flexible
(FT-CAP) Multilayer Ceramic
1812 Termination
Termination
Dielectric
A
C
TU
Failure Rate/
Design
Termination
Finish1
Packaging/Grade
(C-Spec)2
4 = 16
R = X7R
A = N/A
C = 100%
See "Packaging
3 = 25
Matte Sn
C-Spec
5 = 50
L = SnPb
Ordering
with the stability of C0G dielectric
and designed
to Table"
1Combined
= 100
(5% Pb
Options
all capacitance requirements,
these flex-robust
devices
2accommodate
= 200
minimum)
below
Capacitor in C0G dielectric incorporates a unique, flexible
termination system that is integrated with KEMET’s standard
are RoHS Compliant, offer up to 5 mm of flex-bend capability and
termination materials. A conductive silver epoxy is utilized between
exhibit no change in capacitance with respect to time and voltage.
1
Additional
termination
finish barrier
options layers
may beof
available.
Contact
KEMET for details.Capacitance change with reference to ambient temperature is limited to
the
base
metal
and
nickel
KEMET’s
standard
1, 2
termination
system in order to establish pliability while maintaining
±30 ppm/ºC from -55°C to +125°C.
2
Additional
reeling or packaging
may be available.
KEMET for details.
Floating Electrode Design
X7Roptions
Dielectric,
6.3 Contact
– 250
terminal(FE-CAP),
strength, solderability
and
electrical performance.
ThisVDC (Commercial & Automotive Grade)
Information
Capacitance Range: 150 pFOrdering
to 0.22 μF
• developed
Temperature
−55°C
to +125°C
technology
was
in orderRange:
to address
the primary
failure
One world.
Oneare
KEMET
In addition to Commercial Grade, Automotive Grade
devices
mode
of MLCCs–
cracks, which
are 5928
typically
the result
available• www.kemet.com
which meet the demanding
Automotive Electronics
Council's 1
© KEMET
Electronicsflex
Corporation
• P.O. Box
• Greenville,
SCof29606 (864) 963-6300
C1012_X7R_OPENMODE_SMD
• 4/16/2015
excessive
tensile
AEC–Q200
qualifiRcation requirements.
C
0805and shearS stresses produced
104 during boardKflexure
5
A
C
TU
and thermalCase
cycling.
Flexible termination
technology inhibits
the
Size Specification/
Capacitance
Failure Rate/
Termination
Packaging/
Ceramicof board stress to the rigid ceramic body, therefore mitigating
Dielectric
transfer
(L" x W")
Series
Code (pF)
Tolerance
(VDC)
Design
Finish1
Grade (C-Spec)2
flex cracks which can result in low IR or short circuit failures.
0402
S = Floating 2 significant digits + J = ±5%
0603
Electrode
number of zeros
K = ±10%
Although this0805
technology does not eliminate the potential
M = ±20%
1206damage that may propagate during extreme
for mechanical
1210
environmental
and handling conditions, it does provide superior
1812
9 = 6.3
8 = 10
4 = 16
3 = 25
5 = 50
1 = 100
2 = 200
A = 250
R = X7R
A = N/A
C = 100%
Matte Sn
L = SnPb (5%
Pb minimum)
flex performance over standard termination systems. FT-CAP
complements KEMET’s Open Mode, Floating Electrode (FECAP),
Floating Electrode with Flexible Termination (FF-CAP),
1
and
KEMET Power Solutions (KPS) product lines by providing a
1,2
2complete portfolio of flex mitigation solutions.
See
"Packaging
C-Spec
Ordering
Options
Table" below
Additional reeling
or packaging
options
may be available.10
Contact
KEMET
for details.
Flexible Termination System
(FT-CAP),
C0G
Dielectric,
– 250
VDC
to 0.47 μF Information
• Temperature Range: −55°C to +125°C
C
Ceramic
1206
X
(L" x W")
Series
0603
0805
1206
1210
1812
1825
2220
2225
X = Flexible
Termination
563
Capacitance
Code (pF)
number of zeros.
Use 9 for 1.0 – 9.9 pF
Use 8 for 0.5 – .99 pF
e.g., 2.2 pF = 229
e.g., 0.5 pF = 508
J
3
G
A
C1014_X7R_FE-CAP_SMD • 4/16/2015
C
1
TU
Dielectric
Packaging/Grade (C-Spec)3
Tolerance1
(VDC)
Design
Finish2
B = ±0.10 pF
C = ±0.25 pF
D = ±0.5 pF
F = ±1%
G = ±2%
J = ±5%
K = ±10%
M = ±20%
8 = 10
4 = 16
3 = 25
5 = 50
1 = 100
2 = 200
A = 250
G = C0G
A = N/A
C = 100%
Matte Sn
L = SnPb
(5%
minimum)
Blank = Bulk (Commercial
Grade)
TU = 7" Reel (Commercial
Grade)
AUTO = 7" Reel
(Automotive Grade)
AUTO 7411 = 13"
Reel/Punched Paper
(Automotive Grade)
AUTO 7210 = 13" Reel/
Embossed Plastic
(Automotive Grade)
Additional capacitance tolerance offerings may be available. Contact KEMET for details.
2,3
SnPb termination finish option is not available on Automotive Grade product.
3
3
Reeling tape options (Paper or Plastic) are dependent on capacitor case size (L"x W") and thickness dimension. See "Chip Thickness/Packaging Quantities" and
3
For additional Information regarding "AUTO" C-Spec options, see "Automotive C-Spec Information" section of this document.
1
2
C1062_C0G_FT-CAP_SMD • 4/16/2015
1
25
High
with
System (HV FT-CAP),
AlthoughVoltage
this technology
doesFlexible
not eliminateTermination
the potential
for mechanical damage that may propagate during extreme
C0G
Dielectric, 500 – 3,000 VDC (Commercial & Automotive Grade)
environmental and handling conditions, it does provide superior
Ceramic Capacitors
complements KEMET’s Open Mode, Floating Electrode (FEOverview
CAP), Floating Electrode with Flexible Termination (FF-CAP)
and KEMET Power Solutions (KPS) product lines by providing a
KEMET’s
High Voltage
Flexiblesolutions.
Termination (HV FT-CAP)
KEMET’s high voltage surface mount MLCCs in C0G dielectric
complete portfolio
of flexwith
mitigation
surface mount MLCCs in C0G dielectric address the primary
feature a 125°C maximum operating temperature and offers the
failure mode of MLCCs—flex cracks, which are typically
most stable voltage and temperature performance of all ceramic
the result of
excessive tensile
shear stresses
dielectric materials.&C0G
(NP0) dielectricGrade)
capacitors exhibit no
(FT-CAP)
X7R and
Dielectric,
6.3produced
– 250 VDC (Commercial
Automotive
Mount
Multilayer
Ceramic
Chip
Capacitors
(SMD MLCCs)
during
flexure
and thermal
cycling.
Featuring
several
change in capacitance with respect to time and voltage and boasts
Ordering
Capacitance Range: 180 pFSurface
to 22board
μF
• Information
Temperature
Range:
−55°C
to +125°C
of the highest CV (capacitance/voltage) values available in
a negligible change in capacitance with reference to ambient
the C
industry,1206
these devices
and
conductive
change
is limited Cto ±30ppm/ºC
from
X utilize a pliable
106
K
4temperature. Capacitance
R
A
AUTO
silver epoxy
between
the
base
metal
and
nickel
barrier
layers
-55°C
to
+125°C.
Capacitance
Rated Voltage
Failure Rate/
Termination Packaging/Grade
Dielectric
ofCeramic
the termination
of this epoxy
layer
(L" x W") system.
SeriesThe addition
Code (pF)
Tolerance
(VDC)
Design
Finish1
(C-Spec)2
inhibits the 0603
transfer Xof=board
stress
to
the
rigid
ceramic
body,
Flexible
2 significant
J = ±5%
9 = 6.3
R = X7R
A = N/A
C = 100%
See
0805
Termination
digits
±10%IR or 8 = 10
Matte Sn
"Packaging
therefore mitigating
flex cracks which
can+ resultKin= low
Overview1206
number
of
M =technology
±20%
4 = 16
L = SnPb (5%
C-Spec
short circuit failures. Although flexible
termination
1210
zeros
3 = 25
Pb minimum)
Ordering
does
not eliminate
the potential
for mechanical
that 5 = 50 Combined with the stability of an X7R dielectric and designed
1808Voltage
Options to
Table"
KEMET’s
High
with Flexible
Termination damage
(HV FT-CAP)
may
propagate
during
extreme
environmental
and
handling
1812
below
surface mount MLCCs in X7R dielectric address the primary 1 = 100accommodate all capacitance requirements, these flex-robust
1825
2 = 200
conditions,
it ofdoes
provide
ex performance
failure mode2220
MLCCs–
flexsuperior
cracks, flwhich
are typicallyover
the resultA = 250devices are RoHS Compliant, offer up to 5 mm of flex-bend
standard
termination
systems.
of excessive2225
tensile and shear stresses produced during board
capability and exhibits a predictable change in capacitance with
Surface Mount
Flex Mitigation (cont.)
High Voltage with Flexible Termination System (HV FT-CAP)
X7R Dielectric, 500 – 3,000 VDC (Commercial & Automotive Grade)
1flexure and thermal cycling. Featuring several of the highest
Additional termination finish options may be available. Contact KEMET for details.respect to time and voltage. Capacitance change with reference to
1,2
CVSnPb
(capacitance/voltage)
values
the industry,
these
termination finish option
is not available
available oninAutomotive
Grade
product. ambient temperature is limited to ±15% from -55°C to +125°C.
2
devices
utilize
a or
pliable
and
conductive
silver
epoxyContact
between
the for
Additional
reeling
packaging
options
may(HV
be
available.
KEMET
details.
High Voltage with Flexible
Termination
System
FT-CAP),
C0G
Dielectric,
base metal and nickel barrier layers of the termination system.
Automotive Grade is available for applications
requiring
proven,
One
world. One
KEMET
500 – 3,000 VDC (Commercial
&ofAutomotive
Grade)
The
addition
this
epoxy
layer
inhibits
the
transfer
of
board
reliable
performance
in
harsh
environments.
Whether
under-hood
C1013_X7R_FT-CAP_SMD • 4/16/2015
1
Capacitance Range: 1 pF toOrdering
0.039 μF •Information
Temperature Range: −55°C to +125°C
or in-cabin, these capacitors are designed for mission and safety
which can result in low IR or short circuit failures. Although
critical automotive circuits. Stricter testing protocol and inspection
C
2225
X
393
J
C
G
A
C
TU
flexible termination technology does not eliminate the potential
criteria have been established for automotive grade products in
Voltage
Case Size
Specifithat
cation/
Capacitance
Capacitance Rated recognition
Failure Rate/
for
mechanical
damage
may propagate
during extreme
of potentially
harsh Termination
environmental
conditions. KEMET
Ceramic
Packaging/Grade
(C-Spec)3
Dielectric
(L" x W")
Series
Code (pF)
Tolerance1
(VDC)
Design
Finish2
automotive grade series capacitors meet the demanding Automotive
0805
X= Flexible
Two significant
pF C = 500
G = C0G
= N/A
C = 100%
= Bulk Bag
flex performance
over
standard termination
systems.BC == ±0.10
Electronics
Council'sA AEC–Q200
qualificationBlank
requirements.
1206
Termination
digits +
±0.25 pF B = 630
Matte Sn
(Commercial Grade)
1210
number of zeros.
D = ±0.5 pF
D = 1000
L = SnPb (5% TU = 7” Reel
Pb minimum) (Commercial Grade)
AUTO = 7” Reel
(Automotive Grade)
AUTO 7411 = 13” Reel/
Punched Paper
(Automotive Grade)
AUTO 7210 = 13” Reel/
Embossed Plastic
(Automotive Grade)
1808 offers low leakage current, exhibits low
F = ±1%
The HV FT-CAP
ESR at F = 1500
1812
G = ±2%
G = 2000
high frequencies
and
fi
nds
conventional
use
as
snubbers
or filters Z = 2500
1825
J = ±5%
2220such as switching power supplies andKlighting
= ±10%
H = 3000
in applications
2225
M = ±20%
ballasts. Their
exceptional performance at high frequencies
has
made them a preferred choice of design engineers worldwide.
In addition to their use in power supplies, these capacitors
are widely used in industries related to automotive(hybrid),
1
Additional capacitance tolerance
be available.
telecommunications,
medical,offerings
military,may
aerospace,
semiconductors
2
and test/diagnostic equipment.
2, 3
SnPbTermination
is not available
automotive grade
product.
System
(HVonFT-CAP)
X7R
Dielectric,
&
Automotive
Grade)
Reeling tape options (Paper or Plastic) are dependent on capacitor case size (L”x W”) and thickness dimension. See “Chip Thickness/Packaging Quantities” and
3
3
to“Tape
0.33
μFInformation
• Temperature
Range:
−55°C
to +125°C
& Reel
Packaging
Information”
sections of
this document.
3
For additional Information regarding “AUTO” C-Spec options, see “Automotive C-Spec Information” section of this document.
C
1210
X
154
K
C
R
A
COne world. OneTUKEMET
Case Size Corporation
Specification/
Capacitance
Rated
Voltage • www.kemet.com Failure Rate/
Termination
Packaging/Grade
• P.O. Capacitance
Box 5928 • Greenville,
SC 29606 (864)
963-6300
C1070_C0G_HV_FT-CAP
• 4/16/2015 1
Dielectric
Ceramic
(L" x W")
Series
Code (pF)
Tolerance
(VDC)
Design
Finish1
(C-Spec)2
0805
1206
1210
1808
1812
1825
2220
2225
X = Flexible
Termination
Two significant
digits + number
of zeros.
J = ±5%
K = ±10%
M = ±20%
C = 500
B = 630
D = 1,000
F = 1,500
G = 2,000
Z = 2,500
H = 3,000
R = X7R
A = N/A
C = 100%
Matte Sn
L = SnPb (5%
Pb minimum)
See "Packaging
C-Spec Ordering
Options Table"
below
2
1
1, 2
26
C1025_X7R_HV_FT-CAP_SMD • 4/16/2015
1
flex performance
termination systems.
FT-CAP
Floating
Electrodeover
andstandard
Flexible Termination.
The floating
product lines by providing an ultimate fail-safe design optimized
complements
KEMET’s
OpenaMode,
Floating
Electrode
(FEelectrode component
utilizes
cascading
internal
electrode
for low to mid range capacitance values. These devices exhibit a
CAP), Floating
Electrode
Flexible
Termination
(FF-CAP),
design
configured
to formwith
multiple
capacitors
in series
within
predictable change in capacitance with respect to time and voltage
KEMET
Powerstructure.
Solutions This
(KPS)
product
lines
by providing
aand
single
monolithic
unique
confi
guration
results a
and boast a minimal change in capacitance with reference to
Surface
Mount
Multilayer
Ceramic
Chip Capacitors
(SMD MLCCs)
complete
portfolio
of and
flex mitigation
solutions.
in
enhanced
voltage
ESD
performance
over standard
ambient temperature. Capacitance change is limited to ±15% from
capacitor designs while allowing for a fail-open condition if
-55°C to +125°C.
mechanically damaged (cracked). The flexible termination
component utilizes a conductive silver epoxy between the base
metal
and
nickel
barrier
layers
of
KEMET’s
standard
termination
Overview
system in order to establish pliability while maintaining terminal
strength,Power
solderability
and
electrical
performance.
Both
(FT-CAP),
Ultra-Stable
X8R
Dielectric,
25 capacitors
– 100 VDC
(Commercial
& Automotive
Grade)
KEMET
Solutions
(KPS)
Commercial
Series
stacked
are environmentally
friendly
and in compliance
with
Information
technologies
address
the primary
failure mode
of to
MLCCs–
to 0.22 μF
• Temperature
Range:
−55°C
+150°C
capacitors
utilize
a proprietary
lead-frame
technology
to flex
RoHS legislation. Available in X7R dielectric, these devices are
cracks, which
the result of
excessive
and
vertically
stackare
onetypically
or two multilayer
ceramic
chip tensile
capacitors
capable of Pb-Free reflow profiles and provide lower ESR, ESL
C
1206
X
104
shear
stresses
produced
during
board
fl
exure
and
thermal
J
3 and higher ripple
H current capability
A
C
AUTO
into a single compact surface mount package. The attached
when compared
to other
cycling.
Case
Size
Specifi
cation/
Capacitance
Capacitance
Reated
Voltage
Failure
Rate/
Termination
Packaging/Grade
lead-frame mechanically isolates the capacitor/s from the
dielectric solutions.
Ceramic Capacitors
Surface Mount
KPS Series, X7R Dielectric, 10 – 250 VDC (Commercial Grade)
Ceramic
Dielectric
(L" x W")
Series Ceramic
CodeChip
(pF)
Tolerance
(VDC)
Design
Finish
(C-Spec)
Surfacecircuit
Mount
Multilayer
Capacitors
(SMD MLCCs)
printed
board,
therefore
offering
advanced
mechanical
Although
neither
technology
the Fpotential
0603
X = Flexiblecan 2eliminate
significantalso
= ±1% for 3 = 25 Combined
H = Ultra-Stable
= N/A
= 100% Matte
See "Packaging
and
thermal
stress
performance.
Isolation
addresses
with the stabilityA of
an X7R Cdielectric,
KEMET’s
KPS
0805
Termination
digits + duringG extreme
= ±2%
5 = 50
X8R
Sn
C-Spec Ordering
mechanical
damage
may propagate
concerns
for1206
audible,that
microphonic
noise
that
may
occur
when
Series
devices
exhibit
a
predictable
change
in
capacitance
number of
J = ±5%
1 = 100
L = SnPb (5%
Options Table"
and/or handling conditions,
the Kcombination
of
aenvironmental
bias voltage
stack offers
to double
with respect to time and voltage and boast
a minimal change
1210is applied. A two chipzeros.
=up
±10%
minimum)
belowin
these
two technologies
provide
the ultimate
level
protection
1812 in the same
M
=of
±20%
the
capacitance
or smaller
design
footprint
when
IR or short
circuit may
condition.
The Contact
FF-CAP
1against a low
compared
to traditional
mount
MLCCs
devices.
Additional termination
finishsurface
options
be available.
KEMET for details.change is limited to ±15% from -55°C to +125°C.
1
2
KPS Series, High Voltage, X7R Dielectric,
500 – 630 VDC (Commercial Grade)
SnPb termination
is not flavailable
on Automotive
Grade product.
Providing
up to 10finish
mmoption
of board
ex capability,
KPS Series
Overview
1,2
Additional
or packaging
options may beSystem
available. Contact
KEMET forX7R
details.Dielectric,
Floating Electrode Design
withreeling
Flexible
Termination
(FF-CAP),
One world.
KEMET&Power
Solutions (KPS)
High Voltage stacked capacitors
KEMET’s KPS Series devices in X7R dielectric
exhibitOne
a KEMET
6.3 – 250 VDC (Commercial
Automotive
Grade)
2
© KEMET
Electronics
Corporation
• P.O.
Box 5928 •toGreenville,
SCstack
29606one
(864) 963-6300
• www.kemet.com
C1063_X8R_FT-CAP_SMD
utilize
a proprietary
lead-frame
technology
vertically
predictable
change in capacitance
with respect to time• 4/16/2015
and
Benefi
ts
to 0.22
μFInformation
• Temperature
Range:
−55°C
to +125°C
KPS Series, X7R
1
or two multilayer ceramic chip capacitors into a single compact
voltage, and boast a minimal change in capacitance with reference
package.
The
lead-frame
to5 ambient temperature.
Capacitance
changeCis limited to ±15%
C mount
0805
Y attached
104range mechanically
K
•surface
-55°C
to +125°C
operating
temperature
R
A
TU
the
capacitor(s)
from
the printed
circuit board,
thereby
from -55°C to +125°C. These
devices are
capable of Pb-Free
•isolates
Reliable
and
robustSpecifi
termination
Case
Size
cation/ system
Capacitance
Failure Rate/
Termination
Packaging/
Dielectric
Ceramicadvanced mechanical and thermal stress performance.
reflow profiles
and provide lower
and1 higher
ripple
•offering
EIA 1210,(L"1812,
x W") and 2220
Seriescase sizes
Code (pF)
Tolerance
(VDC)
DesignESR, ESLFinish
Grade
(C-Spec)2
also0603
addresses
concerns
for
audible
microphonic
current
capability
when
compared
to
other
dielectric
solutions.
•Isolation
DC voltage
ratingsYof= 10
V,
16
V,
25
V,
50
V,
100
V,
and
250
V
Floating 2 significant digits J = ±5%
9 = 6.3
R = X7R
A = N/A
C = 100%
See
that may
when
a biasfrom
is zeros
applied.
two-chip 8 = 10
0805occur
Electrode
+voltage
number
of
K =AμF
±10%
Matte Sn
"Packaging
•noise
Capacitance
offerings
ranging
0.1 μF
up to 47
1206
with Flexible
M = or
±20%
L =and
SnPbfilters
(5% in applications
C-Spec
offers capacitance
up to double
the capacitance
in the
smaller 4 = 16Conventional uses include both snubbers
•stack
Available
tolerances
of ±10%
andsame
±20%
1210
Termination
Pb minimum)
Ordering
3 = 25
design
footprint
when
compared
to
traditional
surface
mount
such
as
switching
power
supplies
and
lighting
ballasts.
Their
• Higher capacitance
in the same footprint
1812
5 = 50
Options Table"
devices.
Providing
up to 10 mm of board flex capability, 1 = 100
exceptional performance at high frequencies has made high
•MLCC
Potential
board
space savings
below
Series High
Voltage
capacitors
areand
environmentally
friendly2 = 200
voltage ceramic capacitors the preferred dielectric choice of
•KPS
Advanced
protection
against
thermal
mechanical stress
A = 250
in compliance
legislation.
design engineers worldwide. In addition to their use in power
•and
Provides
up to 10with
mmRoHS
of board
flex capability
1
Additional termination finish options may be available. Contact KEMET for details.supplies, these capacitors are widely used in industries related
1,2
to automotive (hybrid), telecommunications, medical, military,
2
Additional
or packaging
may be available.Grade)
Dielectric,
10reeling
– 250
VDCoptions
(Commercial
aerospace, semiconductors, and test/diagnostic equipment.
InformationRange: −55°C to +125°C
Capacitance Range: 0.1 μFOrdering
to 47 μF • Temperature
C
Benefi
ts2220
•
•
•
•
•
•
Ceramic
C
106
Capacitance
M
5
R
Dielectric
1
(VDC)
x W") operating
Series temperature
Code (pF)
-55°C to(L"+125°C
range Tolerance
1210robust
C =termination
Standard system
2 significant
K = ±10%
Reliable and
digits +
M = ±20%
EIA 2220 1812
case size
2220
number of
DC voltage ratings of 500 V and 630zeros
V
Capacitance offerings ranging from 0.047 µF up to 1.0 µF
Available capacitance tolerances of ±10% and ±20%
8 = 10
4 = 16
3 = 25
5 = 50
1 = 100
A = 250
R = X7R
2
C1015_X7R_FF-CAP_SMD • 4/16/2015
C
1
7186
Leadframe Packaging/Grade
Finish2
(C-Spec)3
Failure Rate/Design
1 = KPS Single Chip Stack C = 100%
2 = KPS Double Chip Stack Matte Sn
7186 = 7" Reel
Unmarked
7289 = 13" Reel
Unmarked
Double chip stacks ("2" in the 13th character position of the ordering code) are only available in M (±20%) capacitance tolerance. Single chip stacks ("1" in the
13th character position of the ordering code) are available in K (±10%) or M (±20%) tolerances.
2
Additional leadframe finish options may be available. Contact KEMET for details.
3
Additional reeling
or packaging options may be available. Contact KEMET for details.
Ordering
Information
1
KPS Series, High Voltage, X7R Dielectric, 500 – 630 VDC (Commercial Grade)
Capacitance Range: 0.047 μF to 1.0 μF • Temperature Range: −55°C to +125°C
© KEMET
29606 (864) 963-6300
• www.kemet.com
C Electronics
2220 Corporation
C • P.O. Box 5928
105• Greenville, SC M
C
R
Ceramic
(L"x W")
Series
2220
C=
Standard
Capacitance
Code (pF)
number of zeros.
Capacitance
Tolerance1
K = ±10%
M = ±20%
Rated Voltage
Dielectric
(VDC)
C = 500
B = 630
R = X7R
2
C1020_X7R_KPS_SMD
• 4/16/2015
C
7186
1
Failure Rate/
Design
Leadframe
Finish2
Packaging/Grade
(C-Spec)3
1 = KPS Single
Chip Stack
2 = KPS Double
Chip Stack
C = 100%
Matte Sn
7186 = 7" Reel/
Embossed Plastic
7289 = 13" Reel/
Embossed Plastic
Double chip stacks ("2" in the 13th character position of the ordering code) are only available in M (±20%) capacitance tolerance.
Single chip stacks ("1" in the 13th character position of the ordering code) are available in K (±10%) or M (±20%) tolerances.
2
3
1
C1036_X7R_KPS_HV_SMD • 4/16/2015
1
27
Overview
are environmentally friendly and in compliance with RoHS
legislation. Combined with X8L dielectric, these devices are
KEMET’s Automotive Grade Series surface mount capacitors
C0G dielectric features a 125°C maximum operating temperature
capable of reliable operation up to 150°C and are well suited for
in C0G dielectric are suited for a variety of applications
and is considered “stable.” The Electronics Industries Alliance
high temperature filtering, bypass and decoupling applications.
requiring proven, reliable performance in harsh environments.
(EIA) characterizes C0G dielectric as a Class I material.
Whether under-hood or in-cabin, these devices emphasize
Components of this classification are temperature compensating
X8L exhibits a predictable change in capacitance with respect to
the vital and robust nature of capacitors required for mission
and are suited for resonant circuit applications or those where
time and voltage, and boasts a minimal change in capacitance
and safety critical automotive circuits. Stricter testing protocol
Q and stability of capacitance characteristics are required. C0G
with reference to ambient temperature up to 125°C. Beyond
and
inspection
criteria
have
been
established
for
automotive
exhibits no change in capacitance with respect to time and voltage
grade products in recognition of potentially harsh environmental
and boasts a negligible change in capacitance with reference to
conditions.
KEMET
automotive
grade
seriesCapacitors
capacitors
ambient
temperature.
Capacitance change is limited to ±30 ppm/
KPS HT Series, High Temperature
150°C,
X8L
Dielectric,
10 –meet
50 VDC
(Commercial
Grade)
Surface
Mount
Multilayer
Ceramic
Chip
(SMD
MLCCs)
Ordering
ºC from -55°C to +125°C.
Capacitance Range: 0.47 μFthe
todemanding
47 μF •Information
Temperature
Range: Council's
−55°C toAEC–Q200
+150°C
qualification requirements
C
2220
C
476
M
4
N
2
C
7186
Ceramic Capacitors
Surface Mount
X7R Dielectric, 6.3 – 250 VDC (Automotive Grade)
Ceramic
Series
(L"x W")
Overview
Benefits 1210
Automotive
C0G Dielectric,
C=
Capacitance
Code (pF)
Dielectric
Tolerance1
(VDC)
2 significant
K = ±10%
8 = 10
N = X8L
Failure Rate/
Design
Leadframe
Finish
Packaging/Grade
(C-Spec)
1 = KPS Single
C = 100%
7186 = 7" Reel/Embossed
2220
Standard
digits
+ number
M =capacitors
±20%
4in= 16 X7R dielectric features
Chip Stack
Sn
Plastic
(Commercial
Grade)
KEMET’s Automotive
Grade Series
surface
mount
a 125°CMatte
maximum
operating
temperature
2 = “temperature
KPS Double stable,” The7289
= 13" Reel/Embossed
• AEC–Q200
automotive
qualifi
ed of zeros.
X7R
dielectric are
suited for
a variety
of applications requiring3 = 25 and is considered
Electronics
5 = 50
Chip Stack
Plastic (Commercial Grade)
• -55°Creliable
to +125°C
operating in
temperature
range
proven,
performance
harsh environments.
Whether
Industries Alliance (EIA) characterizes X7RAUTO
dielectric
a 7"Reel
= Autoas
Grade
•under-hood
Lead (Pb)-Free,
RoHSthese
and REACH
or in-cabin,
devices compliant
emphasize the vital and
Class II material. Components of this classifi
cation are
fixed,
(Embossed
Plastic)
AUTOand
7289=
Auto Grade
• EIA 0402,
0805, 1206,
1210,for1812,
and and
2220safety
case critical
sizes
robust
nature0603,
of capacitors
required
mission
ceramic dielectric capacitors suited for bypass
decoupling
Reel (Embossed
• DC voltagecircuits.
ratings of
10 V, 16
V, 25protocol
V, 50 V, 100
200 V and 250 V applications or for frequency discriminating13"
automotive
Stricter
testing
and V,
inspection
circuits
where
Q
Plastic)
•1 Double
Capacitance
offerings
ranging
from
0.5
pF
up
to
0.47
μF
criteria
have
been
established
for
automotive
grade
products
and
stability
of
capacitance
characteristics
are
not
critical.
X7R
chip stacks ("2" in the 13th character position of the ordering code) are only available in M (±20%) capacitance tolerance.
• Single
Available
tolerances
of ±0.10
±0.25
pF, ±0.5
in
recognition
of potentially
harsh
environmental
conditions
. pF,
exhibits
predictable
change
in capacitance with respect to time
chip capacitance
stacks
("1" in the
13th
character
positionpF,
of the
ordering
code)
are available
in Ka(±10%)
or M (±20%)
tolerances.
2 ±1%, ±2%, ±5%, ±10%, and ±20%
grade
series
theKEMET
demanding
Additionalautomotive
leadframe finish
options
maycapacitors
be available.meet
Contact
for details. and voltage and boasts a minimal change in capacitance with
GradeKEMET
3
Additional reeling
or packaging
optionsAEC–Q200
may be available.
Contact
Automotive
Electronics
Council's
qualifi
cationKEMET for details.
3
Reeling tape options (Paper or Plastic) are dependent on capacitor case size (L"x W")
and thickness
dimension.
See "Chip Thickness/Packaging Quantities" and
requirements
to ±15%
from -55°C
to +125°C.
10 – 250
VDC
Information
3 to 0.47 μF • Temperature Range: −55°C to +125°C
3
All Automotive packaging C-Specs listed exclude packaging of laser mark components. Please contact KEMET if you require a laser marked option.
C
1206
C
104
J
3
(L" x W")
Series
Code (pF)
Tolerance1
(VDC)
G
A
C One world. One
AUTO
KEMET
Failure Rate/
Specification/
Rated
Voltage• www.kemet.com
Packaging/Grade
© KEMET ts
Electronics
• P.O. BoxCapacitance
5928 • Greenville,Capacitance
SC 29606 (864)
963-6300
C1038_X8L_KPS_150C_SMD
• 4/16/2015
Benefi
Termination Finish
Dielectric
Ceramic
•
•
•
•
•
•
0402
C = Standard
AEC–Q200
automotive
qualified 2 significant digits B = ±0.10 pF
0603 operating temperature
+ numberrange
of zeros C = ±0.25 pF
-55°C to +125°C
Use 9 for
D = ±0.5 pF
0805
Lead (Pb)-Free,
RoHS
and
REACH
compliant
F = ±1%
1206
1.0 – 9.9 pF
Temperature
1210stable dielectric
Use 8 for
G = ±2%
– .99and
pF 2220,
J =case
±5% sizes
EIA 0402, 1812
0603, 0805, 1206, 1210, 0.5
1812,
2220
ex. 2.2 pF = 229 K = ±10%
DC voltage ratings of 6.3 V, 10 V, ex.
16 0.5
V, 25
V, 50 V, 100 V,
pF = 508 M = ±20%
200 V, and 250 V
8 = 10
4 = 16
3 = 25
5 = 50
1 = 100
2 = 200
A = 250
2
Design
G = C0G
A = N/A
C = 100% Matte Sn
(C-Spec)3
1
AUTO = 7" Reel
AUTO 7411 = 13"
Reel/Punched
Paper
AUTO 7210 = 13"
Reel/Embossed
Plastic
Additional termination finish options may be available. Contact KEMET for details
3
3
options
(Paper or Plastic)
are dependent
capacitor case size (L"x W") and thickness dimension . See "Chip Thickness/Packaging Quantities" and
Information
pF Ordering
toReeling
22 μFtape• Temperature
Range:
−55°C toon +125°C
3
1
2
X7R Dielectric, 6.3 – 250 VDC
C
0805
C
225
M
4
R
A
C
AUTO
Failure Rate/
Capacitance
Packaging/Grade
Termination
Finish1
Dielectric
©Ceramic
KEMET Electronics
Greenville,Tolerance
SC 29606 (864) (VDC)
C1022_C0G_AUTO_SMD
• 4/16/2015
1
3
Design
(L" x W") Corporation
Series• P.O. Box 5928
Code• (pF)
(C-Spec)
0402
0603
0805
1206
1210
1812
2220
C = Standard
Two significant
digits + number
of zeros.
J = ±5%
K = ±10%
M = ±20%
9 = 6.3
8 = 10
4 = 16
3 = 25
5 = 50
1 = 100
2 = 200
A = 250
R = X7R
A = N/A
C = 100% Matte
Sn
AUTO = 7" Reel
AUTO 7411 = 13"
Reel/Punched Paper
AUTO 7210 = 13"
Reel/Embossed
Plastic
3
3
3
All Automotive packaging C-Specs listed exclude packaging of laser mark components. Please contact KEMET if you require a laser marked option.
1
2
28
C1023_X7R_AUTO_SMD • 4/16/2015
1
savings in inventory and pick/place machine positions.
Overview
Ceramic Capacitors
KEMET’s C0G dielectric features a 125°C maximum operating
KEMET’s
Ceramic
Capacitor
Array in X7R
dielectric is an
respect to time and voltage and boasts a minimal change in
temperature
and is Chip
considered
“stable.”The
Electronics
advanced
passive
technology
where
multiple
capacitor
elements
Industries Alliance (EIA) characterizes C0G dielectric as a Class
are
integrated
into
one
common
monolithic
structure.
Array
Surface
Multilayer
Ceramic
Chip Capacitors
(SMD MLCCs)
I material.Mount
Components
of this
classification
are temperature
technology
promotes
reduced
placement
costs
and
increased
compensating and are suited for resonant circuit applications
throughput.
ThisQisand
achieved
one device
or those where
stabilitybyofalternatively
capacitanceplacing
characteristics
are
than
twoexhibits
or four discrete
devices.
Use of capacitor
arrays
Automotive Graderather
(cont.)
required.
C0G
no change
in capacitance
with respect
to
requirements.
Capacitor Array, C0G Dielectric,
10
–
200
VDC
density and more
functions
per
board. Arrays consume only
Ordering Information
space required for
standard
chipsto
resulting
in
Capacitance Range: 10 pF atoportion
2,200ofpFthe• Temperature
Range:
−55°C
+125°C
Overview
savings
in inventory and pick/place machine positions.
4
104
K
4
G
A
C
TU
CA
06
C
KEMET’s
Ceramic
Open
Mode
capacitor
in
X7R
dielectric
is
mechanical
damage
that
may
propagate
during
extreme
enviCeramic Case
Number
of Specifi
cation/ maximum
Capacitance
Packaging/Grade
KEMET’s
X7RSize
dielectric
features
a 125°C
operating
Dielectric
2
Array
(VDC) and handlingDesign
(L"
x W")1 cantly
Capacitors
Series
Codeof(pF)
Tolerance
Finish
(C-Spec)3flex
designed
to
signifi
minimize
the
probability
a
low
IR
or
ronmental
conditions,
it
does
provide
superior
temperature and is considered “temperature stable.” The
short circuit
condition
tocharacterizes
failure 2insignifi
a board
performance
standard
termination
systems.
When
combined
Blank
= Bulk
Bag
05Industries
= 0508 2when
= 2 forced
C = Standard
cant stress
J = ±5%
8 = 10
Gover
= C0G
A = N/A
C = 100%
Electronics
Alliance
(EIA)
X7R
dielectric
(Commercial
Grade)
06 = thus
0612 reducing
4 = 4 theXpotential
= Flexible for catastrophic
digits +
Kfailure.
= ±10%
4 = 16flexible termination technology
Matte
Sn devices
flasexasituation,
with
these
offer
the
ultimate
Class II material. Components
of this classifi
cation
L = SnPb (5% TU = 7" Tape & Reel
Termination
number
of are
M = ±20% 3 = 25
The
Open
Mode
capacitor
may
experience
a
drop
in
capacilevel
of
protection
against
a
low
IR
or
short
circuit
condition.
Open
fixed, ceramic dielectric capacitors suited for bypass
minimum)
(Commercial Grade)
zeros and
5 = 50
tance;
however,
a
short
is
unlikely
because
a
crack
will
not
Mode
devices
compliment
KEMET's
Floating
Electrode
(FEAUTO = 7" Reel
1 = 100
decoupling applications or for frequency discriminating circuits
Surface
Mount Multilayer
Ceramic
Chip Capacitors
MLCCs)
(Automotive
Grade)
2 = 200and Floating Electrode with Flexible Termination
typicallyQ propagate
across
counter
electrodes
within are
the(SMD
device’s
CAP)
(FF-CAP)
where
and stability
of capacitance
characteristics
not
AUTO 7411
=mid
13" to
“active
area.”
Since
there
will
not
be
any
current
leakage
associproduct
lines
by
providing
a
fail-safe
design
optimized
for
critical. X7R exhibits a predictable change in capacitance with
Reel/Punched Paper
ated with a typical Open Mode flex crack, there is no localized
high range capacitance values. These devices exhibit
a predict(Automotive
Grade)
heating and therefore little chance for a catastrophic and poten7210 = 13"and
Reel/
able change in capacitance with respect to timeAUTO
and voltage
Embossed
tially costly failure event.
boast a minimal change in capacitance with reference
to Plastic
ambient
(Automotive Grade)
temperature. Capacitance change is limited to ±15% from -55°C
1
Driven
by the
demand
for acase
moredimension
robust and
reliable
com+125°C.
All previous
reference
to metric
"1632"
has been
replaced with anto
inch
standard reference of "0612". Please reference all new designs using the
Overview
"0612" the
nomenclature.
"CA064"
replaces
"C1632"
in the ordering
code.
ponent,
Open Mode
capacitor
was
designed
for critical
Capacitor Array, X7R Dielectric,
10 –finish
200 VDC
2
may betemperatures
available. Contact
for details.
applications
whereElectrode
higheroptions
operating
andKEMET
mechaniKEMET’s
(FE-CAP)
multilayer
ceramic
Combined with the stability of an X7R dielectric, the FE-CAP
2,3to 0.22 Floating
μFInformation
• Temperature
−55°C
to
+125°C
SnPb termination
finish option is notRange:
available on
automotive
grade product.
cal
stress
are
a
concern.
These
capacitors
are
widely
used
in
capacitor
X7Rordielectric
a cascading
internal
complements KEMET’s “Open Mode” devices by providing a
3
Additional in
reeling
packagingutilizes
options may
be available.
Contactelectrode
KEMET for details.
asform
well
as
power
supplies
(input
andwithin
output
3automotive
design
gured
to
multiple
capacitors
in
series
a
design
optimized
for "Chip
low to
mid range Ccapacitance
Reeling
tapecircuits
options
(Paper
or
Plastic)
are
dependent
on
capacitor
case
size
(L"x
W")
and thickness
dimension.
Quantities"
CA confi
C
4
R See
TU and
06
4
104
K fail-safe
AThickness/Packaging
filters)
and
general
electronic
applications.
"Tapemonolithic
& Reel
Packaging
Information"
sectionsconfi
of this
document.
single
structure.
This
unique
guration
results in
values. These devices exhibit a predictable change in capacitance
Packaging/
3
Failure
Ceramic
of"AUTO"
Specifi
cation/
Capacitance
Capacitance
Rated
Voltage
Case
Sizeand Number
For additional
Information
regarding
C-Spec
see "Automotive
C-Spec
of this
document.
enhanced
voltage
ESD
performance
overoptions,
standard
capacitor
with Information"
respect
to section
timeDielectric
and
voltage
andRate/
boastTermination
a minimal
change
Gradein
1
Design
Finish2
Capacitors
Seriesexcessive
Code
(pF)
Tolerance
(VDC)
Array
(L"with
x W")
3
Concerned
fl
ex
cracks
resulting
from
tensile
(C-Spec)
One world.Capacitance
One
KEMET
designs while allowing for a fail-open condition if mechanically
capacitance with reference to ambient temperature.
and
shear
stresses
produced
during
board
fl
exure
and
thermal
©
KEMET
Electronics
Corporation
•
P.O.
Box
5928
•
Greenville,
SC
29606
(864)
963-6300
•
www.kemet.com
C1016_C0G_ARRAY_SMD
•
4/16/2015
1
damaged 05
(cracked).
the
may 2experience
= 0508 If 2damaged,
=2
C =device
Standard
significant J = ±5% change
8 =is
10limited toR±15%
= X7R from A-55°C
= N/A to +125°C.
C = 100%
See
06 = 0612
4 =are
4a short
=with
Flexible
digits
+ is K = ±10%
4 = 16
Matte Sn
"Packaging
devicesbut
available
KEMET's
Flexible
acycling?
drop inThese
capacitance
isXunlikely.
The FE-CAP
Termination
number
of
M = ±20%
3 = 25
L = SnPb
C-Spec
termination
inhibits
of board
designed
to technology
reduce the which
likelihood
of athe
lowtransfer
IR or short
circuit
In addition
to Commercial Grade, Automotive
Grade devices
zeros
5 = 50
(5%
Ordering
stress to the
body,
flex cracks
condition
andrigid
the ceramic
chance for
a catastrophic
and potentially
costly
are available
1 = 100 which meet the demanding Automotive
minimum) Electronics
Options Table"
which
result in low IR or short circuit failures. Although flexbelow
2 = 200
failure can
event.
Council's
AEC–Q200 qualification requirements.
1ible termination technology does not eliminate the potential for
Driven
the demand
for a more
robust
andin reliable
component,
"0612"by
nomenclature.
"CA064"
replaces
the ordering
code.
X7R
Dielectric,
16"C1632"
– 200
VDC
2
Additional
termination
finish options
may be applications
available. Contact
KEMET for details.
the
FE-CAP
was designed
for critical
where
Ordering
2,3
to 6.8
μFInformation
• Temperature
Range:
to grade
+125°C
SnPb
termination
fitemperatures
nish option is notand
available
on−55°C
automotive
higher
operating
mechanical
stress
are product.
a
3
concern. These capacitors are manufactured in state of the art
C 16949:2009
1210 certified
J facilities and 685
3
R
A
C
TU
ISO/TS
are widely used K
in
Case Size
Specifi
cation/ filters)Capacitance
Failure Rate/
Termination
Packaging/Grade
power
supplies
(input
and
output
and
general
electronic
Dielectric
©Ceramic
KEMET Electronics
• P.O. Box 5928
• Greenville,
SCTolerance
29606 (864) 963-6300
C1017_X7R_ARRAY_SMD
• 4/16/2015
(L" x W") Corporation
Series
Code
(pF)
(VDC) • www.kemet.com
Design
Finish1
(C-Spec)2 1
applications.
Surface Mount
Open Mode Design (FO-CAP), X7R Dielectric, 16 – 200 VDC
Floating Electrode Design (FE-CAP), X7R Dielectric,
6.3 – 250 VDC (Commercial & Automotive Grade)
0805
1206
1210
1812
J = Open Mode digits + number of
with Flexible
zeros
Termination
K = ±10%
M = ±20%
4 = 16
3 = 25
5 = 50
1 = 100
2 = 200
R = X7R
A = N/A
C = 100%
Matte Sn
L = SnPb
(5% Pb
minimum)
See "Packaging
C-Spec
Ordering
Options Table"
below
2
1
1, 2
Floating Electrode Design (FE-CAP), X7R Dielectric, 6.3 – 250 VDC
to 0.22 μFInformation
C
Ceramic
0805
S
(L" x W")
Series
0402
0603
0805
1206
1210
1812
104
K
5
R
Capacitance
Code (pF)
Capacitance
Tolerance
Rated Voltage
(VDC)
J = ±5%
K = ±10%
M = ±20%
9 = 6.3
8 = 10
4 = 16
3 = 25
5 = 50
1 = 100
2 = 200
A = 250
S = Floating 2 significant digits +
Electrode
number of zeros
C1012_X7R_OPENMODE_SMD • 4/16/2015
1
A
C
TU
Dielectric
Failure Rate/
Design
Termination
Finish1
Packaging/
Grade (C-Spec)2
R = X7R
A = N/A
C = 100%
Matte Sn
L = SnPb (5%
Pb minimum)
See
"Packaging
C-Spec
Ordering
Options
Table" below
2
1
1,2
29
C1014_X7R_FE-CAP_SMD • 4/16/2015
1
Although this technology does not eliminate the potential
for mechanical
mayAutomotive
propagate Series
during stacked
extreme
KEMET
Power damage
Solutionsthat
(KPS)
Combined with the stability of an X7R dielectric, KEMET’s KPS
environmental
anda proprietary
handling conditions,
it does
providetosuperior
capacitors
utilize
lead-frame
technology
Series devices exhibit a predictable change in capacitance
flex performance
over
standard
termination
FT-CAP
vertically
stack one
or two
multilayer
ceramicsystems.
chip capacitors
complements
KEMET’s
Open mount
Mode, package.
Floating Electrode
(FEinto
a single compact
surface
The attached
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
CAP), Floating
Electrode isolates
with Flexible
Termination
(FF-CAP)
lead-frame
mechanically
the capacitor/s
from
the
and KEMET
product
lines mechanical
by providing a
printed
circuitPower
board,Solutions
therefore(KPS)
offering
advanced
complete
portfolio
flex mitigation
solutions.
and
thermal
stressofperformance.
Isolation
also addresses
KPS Series automotive grade capacitors meet the demanding
concerns for audible, microphonic noise that may occur when
a bias voltage is applied. A two chip stack offers up to double
requirements.
(FT-CAP)
X7RorDielectric,
– 250
the capacitance
in the same
smaller design 6.3
footprint
whenVDC
Ordering
Capacitance Range: 180 pFcompared
to 22 μFto• Information
Temperature
Range:
−55°Cdevices.
to +125°C
Overview
traditional
surface
mount MLCC
Providing
up to 10 mm of board flex capability, KPS Series capacitors
Cenvironmentally
1206Voltage
X Flexible
KEMET’s
High
with
Termination
(HV RoHS
FT-CAP)
to
106
K
4Combined withRthe stability of Aan X7R dielectric
C and designed
AUTO
are
friendly
and in compliance
with
surface
mount
MLCCs
in
X7R
dielectric
address
the
primary
accommodate all capacitance
these flex-robust
Case
Size Specifi
cation/
Capacitance
Capacitance
Rated Voltage
Failurerequirements,
Rate/
Termination
Packaging/Grade
legislation.
Available
in
X7R
dielectric,
these
devices
are
Ceramic
Dielectric
xofW")
(pF)are typically
Tolerance
Design
(C-Spec)2
failure mode
MLCCs–
flexprofi
cracks,
which
the result
devices are RoHS Compliant,
offer up to 5 Finish
mm of1 flex-bend
capable
of(L"Pb-Free
reflSeries
ow
les Code
and
provide
lower
ESR,
ESL (VDC)
of excessive
tensile
and
shear
stresses
produced
board 9 = 6.3 capability and
a predictable
in capacitance See
with
0603
X
= Flexible
2 signifi
cant
J during
= ±5%
R =exhibits
X7R
A = N/A change
C = 100%
and
higher
ripple
current
capability
when
compared
to other
Surface
Mount
Multilayer
Ceramic
Chip
Capacitors
(SMD MLCCs)
0805
Termination
digits
+
= ±10%
Sn with reference
"Packaging
flexure and
thermal cycling.
Featuring
several
of Kthe
highest 8 = 10 respect to time and voltage. CapacitanceMatte
change
to
dielectric
solutions.
1206
number of
M = ±20%
4 = 16
L = SnPb (5%
C-Spec
CV (capacitance/voltage)
values available
in the industry, these 3 = 25 ambient temperature is limited to ±15% Pb
from
-55°C to +125°C.
1210
zeros
minimum)
Ordering
devices utilize
a pliable and conductive silver epoxy between the5 = 50
1808
Options Table"
1812 nickel barrier layers of the termination system. 1 = 100Automotive Grade is available for applications requiring proven,
below
base metal and
The addition1825
of this epoxy layer inhibits the transfer of board 2 = 200reliable performance in harsh environments. Whether under-hood
2220
A = 250
stress to the2225
rigid ceramic body, therefore mitigating flex cracks
Overview
which
can result in low IR or short circuit failures. Although
1
fl1,2exible
termination technology does not eliminate the potential
criteria have been established for automotive grade products in
KEMET
Power Solutions (KPS) High Voltage stacked capacitors
KEMET’s
Series devices
in X7R dielectric
exhibit aKEMET
2for mechanical damage that may propagate during extreme
recognitionKPS
of potentially
harsh environmental
conditions.
Additional
reeling
or packaging
may be available. Contact KEMET for details.
KPS Series, X7R Dielectric,
10
– 250
VDC options
utilize
a
proprietary
lead-frame
technology
to
vertically
stack
one
predictable
change
in
capacitance
with
respect
to time and
environmentalInformation
and handling conditions, it does provide superior
automotive grade series capacitors meet theOne
demanding
Automotive
world. One
KEMET
totwo
47 multilayer
μF • Temperature
Range:
−55°C
tosingle
+125°C
or
ceramic
chip
capacitors
into
a
compact
voltage,
and
boast
a
minimal
change
in
capacitance
with reference
fl©ex
performance
over
standard
termination
systems.
Electronics
Council's
AEC–Q200
qualifi
cation
requirements.
KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
C1013_X7R_FT-CAP_SMD • 4/16/2015
1
surface mount package. The attached lead-frame mechanically
to ambient temperature. Capacitance change is limited to ±15%
C
2220
C
106
M
5
R
2
C
AUTO
isolates
the capacitor(s)
from
the printed
board,
from -55°C to +125°C. These devices are capable of Pb-Free
The
HV FT-CAP
offers low
leakage
current,circuit
exhibits
low thereby
ESR at
Case Size
cation/
Capacitance
Capacitance
Ratedrefl
Voltage
Packaging/Grade
offering
advanced
mechanical
and thermal
performance.
ow profiDielectric
les and provide
lower ESR,Termination
ESL and higher
ripple
high
frequencies
and
fiSpecifi
nds conventional
use stress
as snubbers
or filters
Ceramic
Failure Rate/Design
2
Finish
(L" xaddresses
W")
Series
Code
(pF)microphonic
Tolerance1
(VDC)
(C-Spec)3
Isolation
also
concerns
for
audible
current
capability
when
compared
to
other
dielectric
solutions.
in applications such as switching power supplies and lighting
1210
C = Standard
Two signifi
cant
KA= two-chip
±10%
R = X7R 1 = KPS Single
C = 100% AUTO = 7" Reel/
noise
thatTheir
may
occur when
a bias voltage
is applied.
ballasts.
exceptional
performance
at high
frequencies
has 8 = 10
1812
digits + number M = ±20%
4 = 16
Chip Stack
Matte Sn
Embossed Plastic
stack
offers
up
to
double
the
capacitance
in
the
same
or
smaller
Conventional
uses
include
both
snubbers
and filters
in applications
made them a2220
preferred choice of designofengineers
worldwide.
AUTO 7289 = 13"
zeros
3 = 25
2 = KPS Double
design
footprint
to traditional
mount
such as switching power
supplies and lighting ballasts.
Their
5 = 50
Chip Stack
Reel/Embossed
In
addition
to theirwhen
use compared
in power supplies,
thesesurface
capacitors
Plastichigh
MLCC
devices.
Providing
uprelated
to 10 mm
of board flex capability, 1 = 100
exceptional performance at high frequencies has made
are widely
used in
industries
to automotive(hybrid),
KPS
Series High Voltage
capacitors
environmentally
friendly A = 250
telecommunications,
medical,
military,are
aerospace,
semiconductors
and
in
compliance
with
RoHS
legislation.
1and test/diagnostic equipment.
supplies, these capacitors are widely used in industries related
telecommunications,
medical, military,
2
Termination
System
FT-CAP)
X7RforDielectric,
500(hybrid),
– 3,000
VDC
Additional
termination finish options
may be(HV
available.
Contact KEMET
details.to automotive
3
Additional
may be available.
KEMET for details.
to 0.33 reeling
μFInformation
• Temperature
Range:
−55°C Contact
to +125°C
Ceramic Capacitors
Surface Mount
Dielectric, 500 – 3,000 VDC (Commercial & Automotive Grade)
Automotive GradeX7R
(cont.)
"Tape
Packaging Information"
sections
C & Reel
1210
X
154of this document.
K
C
R
A
C
TU
3
Failure
Rate/
Termination
Case
Size
Specifi
cation/
Capacitance
Capacitance
Rated
Voltage
Packaging/Grade
3Benefits
Dielectric
Ceramic
All
Automotive packaging C-Specs listed exclude packaging of laser mark components. Please
contact KEMET if you require a laser marked
option.
Design
Finish1
(L" x W")
Series
Code (pF)
Tolerance
(VDC)
(C-Spec)2
3
One world.
KEMET
0805 operating
X = Flexibletemperature
Two significant
C = 500
R = X7R
A = N/A
C = 100%
SeeOne
"Packaging
• -55°C to +125°C
range J = ±5%
+ number
C-Spec
Ordering 1
• P.O.digits
Box 5928
• Greenville,
SC 29606 (864)
C1021_X7R_KPS_AUTO_SMD
• 4/16/2015
Termination
K = ±10%
B = 630
Matte Sn
1206 Corporation
• Reliable and robust termination system
of zeros.
Options Table"
M = ±20%
D = 1,000
L = SnPb (5%
1210
below
• EIA 2220 1808
case size
F = 1,500
Pb minimum)
G = 2,000
• DC voltage1812
ratings of 500 V and 630 V
1825offerings ranging from 0.047 µF up to 1.0 µF Z = 2,500
• Capacitance
H = 3,000
2220
tolerances of ±10% and ±20%
2225
2
1
1, 2
KPS Series, High Voltage, X7R Dielectric, 500 – 630 VDC
Ordering
Information
to 0.47 μF
C
Ceramic
2220
C
(L"x W")
Series
2220
C=
Standard
105
M
Capacitance
Code (pF)
Capacitance
Tolerance1
number of zeros.
K = ±10%
M = ±20%
C
R
2
C
7186
Failure Rate/
Design
Leadframe
Finish2
Packaging/Grade
(C-Spec)3
1 = KPS Single
Chip Stack
2 = KPS Double
Chip Stack
C = 100%
Matte Sn
7186 = 7" Reel/
Embossed Plastic
7289 = 13" Reel/
Embossed Plastic
Rated Voltage
Dielectric
(VDC)
C = 500
B = 630
R = X7R
C1025_X7R_HV_FT-CAP_SMD • 4/16/2015
1
2
3
1
30
C1036_X7R_KPS_HV_SMD • 4/16/2015
1
legislation. Combined with X8L dielectric, these devices are
capable
of reliable operation up to 150°C and are well suited for
Overview
high temperature filtering, bypass and decoupling applications.
KEMET’s Flexible Termination (FT-CAP) Multilayer Ceramic
Combined with the stability of C0G dielectric and designed to
Surface
Mount
Multilayer
Ceramic Chip
Capacitors (SMD MLCCs)
Capacitor
in C0G
dielectric incorporates
a unique, flexible
accommodate all capacitance requirements, these flex-robust devices
X8L exhibits
a predictable
with respect to
termination
system
that
is
integrated
with
KEMET’s
standard
are RoHS Compliant, offer up to 5 mm of flex-bend capability and
termination
materials.
A conductive
silver epoxy
is utilizedBeyond
between
exhibit no change in capacitance with respect to time and voltage.
with reference
to ambient
temperature
up to 125°C.
base metal and nickel barrier layers of KEMET’s standard
Capacitance change with reference to ambient temperature is limited to
Automotive Gradethe (cont.)
termination system in order to establish pliability while maintaining
±30 ppm/ºC from -55°C to +125°C.
150°C, X8L
Dielectric,
10 This
– 50 VDC
terminal strength, solderability
and electrical
performance.
technology
developed in order
to address
the primary
failure
In addition to Commercial Grade, Automotive Grade devices are
to 47 μFwas
•Information
Temperature
Range:
−55°C
to +150°C
Overview
mode of MLCCs– flex cracks, which are typically the result of
available which meet the demanding Automotive Electronics Council's
excessive
tensile
C
2220 and shear
C stresses produced
476 during board
M flexure 4 AEC–Q200
N qualification2requirements.C
7186
KEMET’s Flexible Termination (FT-CAP) Multilayer Ceramic
Combined with the stability of KEMET’s Ultra-Stable high
and thermal
cycling.
Flexible
termination
technologyCapacitance
inhibits the Rated Voltage
Case
Size
Specifi
cation/
Capacitance
Failure
Rate/
Leadframe
Packaging/Grade
Capacitor
in Ultra-Stable
X8R
dielectric
incorporates
a unique,
temperature
Ceramicof board
Dielectricdielectric technology, these flex-robust devices
1
transfer
to the
rigid
ceramic
body, therefore
mitigating
(L"x W")stress Series
Code (pF)
Tolerance
(VDC)
Design
Finish
(C-Spec)
flflex
exible
termination
system
that
is
integrated
with
KEMET’s
are
RoHS
Compliant, offer up to 5 mm of flex-bend capability
cracks which
can result
in low IR2orsignifi
short
circuit Kfailures.
1210
C=
cant
= ±10%
8 = 10
N = X8L 1 = KPS Single C = 100% 7186 = 7" Reel/Embossed
standard termination materials. A conductive silver epoxy is
and feature a 150°C maximum operating temperature. Ultra2220
Standard
4 = 16
Chip Stack
Matte Sn
utilized
the basedoes
metalnot
and
layers of 3 = 25 Stable X8R dielectric
offers
the same temperature
capability
as
Althoughbetween
this technology
eliminate
the potential
ofnickel
zeros. barrier
2 = KPS
Double
7289 = 13"
Reel/Embossed
Chip
Plastic
Grade)
KEMET’s
standard
termination
system
in order
to establish
butStack
without the capacitance
loss(Commercial
due to applied
for mechanical
damage
that may
propagate
during
extreme 5 = 50 conventional X8R
AUTO
= Auto Grade 7"Reel
environmental
and handling
conditions,
it does
provide
pliability
whileMultilayer
maintaining
terminal
strength,
solderability
and
DC voltage. These devices exhibit no change
in capacitance
with
Surface
Mount
Ceramic
Chip Capacitors
(SMD
MLCCs)superior
(Embossed Plastic)
flelectrical
ex performance
over
standard
termination
systems.
FT-CAP
performance. This technology was developed in order
respect to voltage and boast a minimal change
capacitance
AUTOin7289=
Auto Grade
complements
Open mode
Mode,ofFloating
Electrode
(FEto address theKEMET’s
primary failure
MLCCs–
flex cracks,
with reference to ambient temperature. They13"are
also
suitable
Reel
(Embossed
CAP), are
Floating
Electrode
withofFlexible
Termination
(FF-CAP),
Plastic)
which
typically
the result
excessive
tensile and
shear
replacements for higher capacitance and larger
footprint devices
1and KEMET Power Solutions (KPS) product lines by providing a
Double chip
stacks ("2"
in the board
13th character
of the ordering
code) are only
available
M (±20%)
capacitance
tolerance.
stresses
produced
during
flexureposition
and thermal
cycling.
that
fail to inoffer
capacitance
stability.
Capacitance change with
complete
portfolio
of flinexthemitigation
solutions.
Single chip
stacks ("1"
13th character
position of the ordering code) are available in K (±10%) or M (±20%) tolerances.
Flexible
termination
technology
inhibits
the
transfer
of
board
respect
to
temperature
is
limited
to
±15%
from -55°C to +150°C.
2
(FT-CAP),
C0GmayDielectric,
10 –KEMET
250forVDC
Additional leadframe
finish options
be available. Contact
details.
3stress to the rigid ceramic body, therefore mitigating flex cracks
Additional
reeling
may be −55°C
available.to
Contact
KEMET for details.
Ordering
Information
Capacitance Range: 0.5 pFOverview
to
0.47 μF
• Temperature
Range:
+125°C
3which can result in low IR or short circuit failures.
to Commercial
Grade,
Grade devices
Reeling tape options (Paper or Plastic) are dependent on capacitor case size (L"x In
W")addition
and thickness
dimension. See
"ChipAutomotive
Thickness/Packaging
Quantities" and
C & Reel
1206
X
G
are3 available which
meetAthe demanding
"Tape
sections
of this document. J
563
C
TU(FE-CAP),
KEMET’s
Floating
Electrode
with
Flexible
Termination
capacitor
complements KEMET’s Open Mode, Floating Electrode
3
For additional
regarding
"AUTO"
C-Specthe
options,
see
"AutomotiveRated
C-Spec
Information"
section
of thisRate/
document.
Although
thisInformation
technology
does not
eliminate
potential
Council's
AEC-Q200
qualifi
cation
requirements.
Case
Size Specifi
cation/
Capacitance
Capacitance
Voltage
Failure
Termination
(FF-CAP)
combines
two
existing
KEMET
technologies–
Flexible
Termination
(FT-CAP)
and
KEMET
Power
Solutions
(KPS)3
3 Ceramic
Dielectric
Packaging/Grade
Allmechanical
Automotive
C-Specs
listed
exclude
packaging
of Tolerance
laser mark1 components.
if you require
a laser
marked
option. (C-Spec)
2
(L" x packaging
W")
Series
Code (pF)
(VDC) Please contact KEMET
Design
Finish
for
damage
that may
propagate
during extreme
Floating Electrode and Flexible Termination. The floating
product lines by providing an ultimate fail-safe
design
optimized
environmental
it does
0603and handling
X = Flexibleconditions,
2 significant
digitsprovide
+
B =superior
±0.10 pF 8 = 10
G = C0G
A = N/A
C = 100% Blank = Bulk (Commercial
electrode
component
utilizes •aP.O.
cascading
internal
electrode
for low to
mid
range capacitance
values. These devices
exhibit a 1
©
KEMET
Electronics
Corporation
Box
5928
•
Greenville,
SC
29606
(864)
963-6300
•
www.kemet.com
0805
Termination
number
of
zeros.
C
=
±0.25
pF
4
=
16
Matte
Sn
Grade) • 4/16/2015
design confi1206
gured to form multiple
in pF
seriesD within
change in capacitanceL =with
respect
voltage
Usecapacitors
9 for 1.0 – 9.9
= ±0.5 pF 3 =predictable
25
SnPb
TU =to7"time
Reeland
(Commercial
complements
KEMET’s Open Mode,
Floating
Electrode
(FE1210
Use
8 for 0.5confi
– .99guration
pF F =results
±1%
5 =and
50 boast a minimal change in capacitance
(5%
Grade)
a single monolithic
structure. This
unique
with
reference to
CAP), Floating
Electrode with Flexible
Termination
(FF-CAP),
e.g., 2.2
pF =over
229 standard
G = ±2%
1 =ambient
100
minimum)
= 7"toReel
in enhanced1812
voltage and ESD performance
temperature. Capacitance
change isAUTO
limited
±15% from
e.g.,product
0.5 pF =lines
508 by Jproviding
= ±5% a 2 = 200
(Automotive Grade)
and KEMET1825
Power Solutions (KPS)
capacitor designs
while
allowing
for
a
fail-open
condition
if
-55°C
to
+125°C.
2220
K = ±10%
A = 250
AUTO 7411 = 13"
complete portfolio
of flex mitigation solutions.
mechanically
damaged (cracked). The flexible termination
2225
M = ±20%
Reel/Punched Paper
Grade)
component utilizes a conductive silver epoxy between the base
In addition to Commercial Grade, Automotive(Automotive
Grade devices
AUTO 7210 = 13" Reel/
metal and nickel barrier layers of KEMET’s standard termination
are available which meet the demanding Automotive
Electronics
Embossed Plastic
system in order to establish pliability while maintaining terminal
(Automotive Grade)
1strength, solderability and electrical performance. Both
2technologies address the primary failure mode of MLCCs– flex
2,3
(FT-CAP),
Ultra-Stable
X8R tensile
Dielectric,
SnPb termination
option
is not
available
on Automotive
Grade
product. 25 – 100 VDC
cracks,
which
arefinish
typically
the
result
of excessive
and
3
Information
Additional
reeling
or
packaging
options
may
be
available.
Contact
KEMET
for details.
to
0.22
μF
•
Temperature
Range:
−55°C
to
+150°C
shear
stresses produced during board flexure and thermal
3
cycling.
"Tape
sections
C & Reel
1206
X
104 of this document.
J
3
H
A
C
AUTO
3
Ceramic Capacitors
Surface Mount
Flexible Termination System (FT-CAP), Ultra-Stable X8R
Dielectric, 25 – 100 VDC (Commercial & Automotive Grade)
Floating Electrode Design with Flexible Termination System
(FF-CAP), X7R Dielectric, 6.3 – 250 VDC (Commercial & Automotive Grade)
Capacitance
Reated Voltage
Failure Rate/
Although
Ceramic neither technology can eliminate the potential for
Dielectric
(L" x W")
Series
Code (pF)
Tolerance
(VDC)
Design
Finish1
(C-Spec)2
mechanical
damage
that may• propagate
extreme
©
KEMET Electronics
Corporation
P.O. Box 5928during
• Greenville,
SC 29606 (864) 963-6300 • www.kemet.com
C1062_C0G_FT-CAP_SMD • 4/16/2015
1
0603and/or
X =handling
Flexible conditions,
2 significantthe Fcombination
= ±1%
H = Ultra-Stable
A = N/A
C = 100% Matte See "Packaging
environmental
of 3 = 25
0805
Termination
digits +
G = ±2%
5 = 50
X8R
Sn
C-Spec Ordering
these two technologies
provide thenumber
ultimate
of protection1 = 100
1206
of level
J = ±5%
L = SnPb (5%
Options Table"
against a low
IR or short circuit condition.
1210
zeros. The KFF-CAP
= ±10%
minimum)
below
1812
M = ±20%
2
1
1,2
Floating Electrode Design with Flexible Termination System (FF-CAP), X7R Dielectric, 6.3 – 250 VDC
C
Ceramic
0805
Y
(L" x W")
Series
0603
0805
1206
1210
1812
104
K
5
R
Capacitance
Code (pF)
Capacitance
Tolerance
Rated Voltage
(VDC)
Y = Floating 2 significant digits J = ±5%
Electrode
+ number of zeros K = ±10%
with Flexible
M = ±20%
Termination
9 = 6.3
8 = 10
4 = 16
3 = 25
5 = 50
1 = 100
2 = 200
A = 250
C1063_X8R_FT-CAP_SMD • 4/16/2015
1
A
C
TU
Dielectric
Failure Rate/
Design
Termination
Finish1
Packaging/
Grade (C-Spec)2
R = X7R
A = N/A
C = 100%
Matte Sn
L = SnPb (5%
Pb minimum)
See
"Packaging
C-Spec
Ordering
Options Table"
below
2
1
1,2
31
C1015_X7R_FF-CAP_SMD • 4/16/2015
1
ment for higher capacitance and larger footprint devices that fail
Overview
to offer capacitance stability. Capacitance change with respect to
temperature is limited to ±15% from -55°C to +150°C.
KEMET’s X8L dielectric features a 150°C maximum operating
temperature and is considered “general purpose high
flexible termination technology does not eliminate the potential
Driven by the demand for a more robust and reliable component,
temperature.” These components are fixed, ceramic dielectric
for mechanical damage that may propagate during extreme
Ultra-Stable X8R dielectric capacitors were developed for critical
capacitors suited for high temperature bypass and decoupling
applications where reliability and capacitance stability at higher
applications or frequency discriminating circuits where Q and
flex performance over standard termination systems.
operatingMount
temperatures
are Ceramic
a concern.Chip
These
capacitors(SMD
are MLCCs)
Multilayer
Capacitors
Automotive GradeSurface
(cont.)
stability
of capacitance
characteristics
are not
critical. X8L
exhibits a predictable change in capacitance with respect to time In addition to commercial grade, automotive grade devices
High Temperature 150°C,
X8R
Dielectric,
– 100 VDC
and Ultra-Stable
voltage and boasts
a minimal
change in25
capacitance
with
are available and meet the demanding Automotive Electronics
Information
Capacitance Range: 10 pF Ordering
to 0.22 μFto •ambient
Temperature
Range:
to +150°C
reference
temperature
up to −55°C
125°C. Beyond
125°C
X8L displays a wider variation in capacitance. Capacitance
1210 to ±15%
C from -55°C184
H
C
AUTO
C is limited
K +15, -40% 3
A
change
to +125°C and
Case
Size
Specifi
cation/
Capacitance
Capacitance
Rated
Voltage
Failure
Rate/
Packaging/Grade
from
125°C to 150°C.
Overview
Dielectric
Termination Finish2
Ceramic
Ceramic Capacitors
Surface Mount
High Voltage X7R Dielectric, 500 – 3,000 VDC
(L" x W")
Series1
Code (pF)
Tolerance
(VDC)
Design
(C-Spec)2
0402
C = for
Standard
2 signifi
cant
= ±1%
3 = 25
H = UltraGrade
A =isN/A
C = 100%
Matte Sn Blank
= Bulkproven,
Bag
Driven
by high
the
demand
a more
robust
and reliable
KEMET’s
voltage
surface
mount
MLCCs
inFX7R
Automotive
available
for applications
requiring
0603
5 = 50
Stable X8R
L = SnPb (5% Pb
(Commercial Grade)
digits + number G = ±2%
component,
X8L
dielectric
capacitors
were
developed
for
critical
Dielectric
feature
a
125°C
maximum
operating
temperature
reliable
performance
in
harsh
environments.
Whether
under-hood
0805
J = ±5%
1 = 100
minimum)
TU = 7” Tape & Reel/
of zeros
applications
where reliability
at higher
operating
and
are considered
“temperature
stable.”
The Electronics
or in-cabin, these capacitors are designed for mission
safety
1206
Ktemperatures
= ±10%
Unmarkedand
(Commercial
1210 These
M =in±20%
Grade)
are a concern.
capacitors
are widely
used
automotive
Industries
Alliance
(EIA)
characterizes
X7R dielectric
as a
critical automotive circuits. Stricter testing protocol
and inspection
1812
AUTO = 7” Reel
circuitsII as
well
asComponents
general high of
temperature
Class
material.
this classifiapplications.
cation are fixed,
criteria have been established for automotive grade
products
(Automotive Grade)
Concerned
with
fl
ex
cracks
resulting
from
excessive
tensile
ceramic dielectric capacitors suited for bypass and decoupling
in recognition of potentially harsh environmental
conditions.
AUTO
7411 = 13”
Reel/Punched
Paper
and shear stresses
produceddiscriminating
during board flcircuits
exure and
thermal
applications
or for frequency
where
Q
KEMET automotive grade series capacitors meet
the demanding
(Automotive
cycling?
These
devices are characteristics
available with KEMET's
Flexible
and
stability
of capacitance
are not critical.
X7R
Automotive Electronics Council's AEC–Q200 qualifi
cationGrade)
AUTO 7210 = 13” Reel/
termination
technologychange
which inhibits
the transfer
boardto
exhibits
a predictable
in capacitance
with of
respect
requirements.
Embossed Plastic
stressand
to the
rigidand
ceramic
body,
therefore
mitigating
flex cracks
time
voltage
boasts
a minimal
change
in capacitance
(Automotive Grade)
with reference to ambient temperature. Capacitance change is
1
Flexibletotermination
option
is available.
Please see FT-CAP product bulletin C1013_X8R_FT-CAP_SMD
limited
±15% from
-55°C
to +125°C.
2
SnPb
termination
finish option 10
is not–available
on automotive grade product.
X8L
Dielectric,
50 VDC
Available in a variety of case sizes and industry leading CV
2,3
Ordering
Additional
may be available.
KEMET for details.
to 10 reeling
μFInformation
• Temperature
Range:
−55°C Contact
to +150°C
3
3
values
these
exhibit
low leakage
Reeling(capacitance/voltage),
tape options (Paper or Plastic)
aredevices
dependent
on capacitor
case size (L”x W”) and thickness dimension. See “Chip Thickness/Packaging Quantities” and
“Tape
&
Reel
Packaging
sections
ofConventional
this document.
current
and
low
ESR atInformation”
high frequencies.
uses
C
1210
X
106
K
8
N
A
C
TU
3
For additional
Information and
regarding
C-Spec options,
include
both snubbers
filters“AUTO”
in applications
suchsee
as“Automotive C-Spec Information” section of this document.
Size and
Specifi
cation/ pertain
Capacitance
Capacitance
Rated Voltage
Failure Rate/
Packaging/Grade
3
The termsCase
“Marked”
“Unmarked”
to laser marking
option
of components.
Ceramic
Dielectric
Termination Finish2
switching
power
lighting
Their
exceptional
1
(L"
x W") supplies
Seriesand
Codeballasts.
(pF)
Tolerance
(VDC)
Design
(C-Spec)3
performance
at
high
frequencies
has
made
high
voltage
MLCC’s
0402
C = Standard 2 significant J = ±5%
8 = 10
N = X8L
A = N/A
C = 100% Matte Sn
See "Packaging
© KEMET
Electronics
Corporation
Box
5928
• Greenville,
SC 296063 (864)
• 4/16/2015
the
preferred
dielectric
choice• P.O.
of design
worldwide.
0603
X = Flexible
digits
+engineers
K = ±10%
= 25 963-6300 • www.kemet.com C1007_X8R_ULTRA_150C_SMD
L = SnPb (5% Pb
C-Spec
Ordering 1
M
=
±20%
5
=
50
minimum)
Options
Table"
0805
Termination
number
of
below
are widely 1206
used in industries relatedzeros
to automotive (hybrid),
1210
telecommunications, medical, military, aerospace, semiconductors
and test/diagnostic equipment.
The flexible termination option is not available on EIA 0402 case size product. "C" must be used in the 6th character position when ordering this case size.
2, 3
3
reeling
may be−55°C
available.to
Contact
KEMET for details.
pF Ordering
toAdditional
0.33 μF
•Information
Temperature
Range:
+125°C
1
2
High Voltage X7R Dielectric, 500 – 3,000 VDC
C Electronics
1210 Corporation
C • P.O. Box 5928
154• Greenville, SCK 29606 (864) 963-6300
C
R
A C1008_X8L_150C_SMD
C
TU
© KEMET
• www.kemet.com
• 4/16/2015
1
Capacitance
Failure Rate/
Termination
Packaging/Grade
Ceramic
Dielectric
(L" x W")
Series
Code (pF)
Tolerance
(VDC)
Design
Finish1
(C-Spec)2
0805
1206
1210
1808
1812
1825
2220
2225
C = Standard
Two significant
digits + number
of zeros.
J = ±5%
K = ±10%
M = ±20%
C = 500
B = 630
D = 1,000
F = 1,500
G = 2,000
Z = 2,500
H = 3,000
R = X7R
A = N/A
C = 100%
Matte Sn
L = SnPb (5%
Pb minimum)
See "Packaging
C-Spec Ordering
Options Table"
below
2
1
1, 2
32
C1010_X7R_HV_SMD • 4/16/2015
1
therefore mitigating flex cracks which can result in low IR or
short circuit failures. Although flexible termination technology
Overview
does not eliminate the potential for mechanical damage that
may propagate during extreme environmental and handling
KEMET’s
program
is an
extension
KEMET knowledge
Test Level A
conditions,COTS
it does
provide
superior
flexofperformance
over
of
high
reliability
test
regimes
and
requirements.
KEMET
regularly
standard termination systems.
Voltage Conditioning
supplies “up-screened” products by working with customer drawings
DWV
IR@25°C
and imposing specified design and test requirements. The COTS
CAP
program offers the same high quality and high reliability components
DF
Automotive Gradeas up-screened
(cont.)products, but at a lower cost to the customer. This is
PDA 8%
accomplished by eliminating the need for customer-specific drawings
Termination
System
(HV
FT-CAP),
C0G
Dielectric, 500 –
to
achieve
the
reliability
level
required
for
customer
applications.
A
Surface
Mount
Multilayer Ceramic
Chip
Capacitors
(SMD MLCCs)
C of C
0.039
μF
•Information
Temperature
Range:
−55°C
to provide
+125°C
series
of tests
and
inspections have
been selected
to
the
accelerated conditioning and 100% screening necessary to eliminate
C mortal2225
J
C
G
infant
failures fromXthe population. 393
Ceramic Capacitors
Surface Mount
Test Level B
Test Level C
DWV
IR@25°C
CAP
DF
DWV
IR@25°C
CAP
DF
PDA 8%
PDA 8%
DPA
DPA
3,000 VDC
Commercial Off-The-Shelf (COTS) for Higher Reliability
A
Applications,
6.3
–
250
RatedVDC
Voltage
Case Size SpecifiX7R
cation/ Dielectric,
Capacitance
Capacitance
Failure Rate/
Ceramic
Dielectric
C of C
85/85
C
TU
Termination
C of C
(L" x W")
Codemaximum
(pF)
Tolerance1
(VDC)
Design
Finish2
KEMET’s C0G
dielectricSeries
features a 125°C
operating
temperature0805
and is considered
Electronics
X= Flexible“stable.”
TwoThe
signifi
cant
BComponents,
= ±0.10 pF C = 500
G = C0G
A = N/A
C = 100%
Blank = Bulk Bag
Termination
digits
+
CC0G
= ±0.25 pF B = 630
Matte Sn
(Commercial Grade)
Overview
Assemblies 1206
& Materials
Association (EIA)
characterizes
1210
number of zeros.
D = ±0.5 pF
D = 1000
L = SnPb (5% TU = 7” Reel
dielectric as1808
a Class I material. Components of this classifi
F = cation
±1%
F = 1500
KEMET’s
COTS
program is an and
extension
of KEMET
knowledge
Test Level B
Test Level C
1812 compensating
G = ±2%
G = 2000 Test Level A
AUTO = 7” Reel
are temperature
are suited
for resonant
1825 test
J = regularly
±5%
Z = 2500
(Automotive Grade)
of
highapplications
reliability
and requirements.
circuit
orregimes
those where
Q and stability KEMET
of capacitance
2220
K = ±10%
AUTO 7411
= 13”
Reel/
Conditioning
Voltage
Conditioning
supplies
“up-screened”
products
working
customer
drawings H = 3000 Voltage DWV
characteristics
are required.
C0G by
exhibits
no with
change
inMcapacitance
2225
= ±20%
Punched PaperDWV
DWV
IR@25°C
IR@25°C
IR@25°C
and
ed design
requirements.
COTS
(Automotive Grade)
with imposing
respect tospecifi
time and
voltageand
andtest
boasts
a negligibleThe
change
in
CAP
CAP
CAP
AUTO 7210 = 13”
Reel/
program
offers
same high
quality and
high reliability
components
DF
DF
DF
capacitance
withthereference
to ambient
temperature.
Capacitance
Embossed Plastic
as
up-screened
but at from
a lower
costtoto+125°C.
the customer. This
change
is limitedproducts,
to ±30 ppm/ºC
-55°C
(Automotive Grade)
PDA 8%
PDA 8%
PDA 8%
is accomplished by eliminating the need for customer-specific
1
Additional
capacitance
tolerance
offerings
may be available.
All
COTS
testing
includes
voltage
conditioning
and
post-electrical
drawings
to
achieve
the
reliability
level
required
for
customer
2
C of C
DPA
DPA
testing
as perAMIL–PRF–55681.
For
enhancedhave
reliability,
KEMET
also
applications.
series of tests and
inspections
beengrade
selected
2,
3
SnPb termination finish option
is not available on automotive
product.
High Reliability Commercial
Off-The-Shelf
(COTS)
provides
test level
options and conformance
certifications:
providethe
thefollowing
accelerated
conditioning
100% screening
3to
C of C
85/85
Additional
reeling
or packaging
options may be available.
3necessary to eliminate infant mortal failures from the population.
options
(Paper orReliability
Plastic) are dependent
on capacitor case size (L”x W”) and thickness dimension. See “Chip Thickness/Packaging Quantities” and
C0G Dielectric, 10 – 250Reeling
VDCtapefor
Higher
Applications
Information”
sections−55°C
of this document.
to“Tape
0.47& Reel
μF Information
•Packaging
Temperature
Range:
to +125°C
3KEMET’s X7R dielectric features a 125°C maximum operating
C of C
One
KEMET
K
5
C world. OneTU
C
1206
G
A
Electronics
Components,T Assemblies 104
& Materials Association (EIA)
C1070_C0G_HV_FT-CAP • 4/16/2015 1
Case Size
cation/
Capacitance
Rated
characterizes
X7R Specifi
dielectric
as a Class
II material.Capacitance
Components
of Voltage Dielectric
Failure Rate/Design
Ceramic
(L" x W")
Series
Code (pF)
Tolerance1
(VDC)
Finish2
(C-Spec)3
this classification are fixed, ceramic dielectric capacitors suited for
T = COTS
2 signifi
digits B = discriminating
±0.10 pF 8 = 10
G = C0G A = Testing per MIL–PRF– C = 100%
Blank = Bulk
bypass and0402
decoupling
applications
or cant
for frequency
0603
+ number of zeros C = ±0.25 pF 4 = 16
55681 PDA 8%
Matte Sn
TU = 7" Reel
circuits where
Q
and
stability
of
capacitance
characteristics
are
0805
D = ±0.5 pF 3 = 25
B= Testing per MIL–PRF– L = SnPb (5%
Use 9 for
not critical. 1206
X7R exhibits a predictable
1.0 –change
9.9 pF in capacitance
F = ± 1%
6 = 35
55681 PDA 8%, DPA per Pb minimum)
8 for a minimal
G = ±2%
EIA–469
with respect1210
to time and voltage andUse
boasts
change in5 = 50
J =Capacitance
±5%
1 = 100
C = Testing per MIL–
0.5 –temperature.
.99 pF
capacitance1812
with reference to ambient
2220
2 = 200
PRF–55681 PDA 8%, DPA
ex. 2.2 pF = 229 K = ±10%
change is limited to ±15% from -55°C
to +125°C.
A = 250
per EIA–469, Humidity per
ex. 0.5 pF = 508 M = ±20%
All COTS testing includes voltage conditioning and post-electrical
testing as per MIL–PRF–55681. For enhanced reliability, KEMET also
1
provides the following test level options and conformance certifications:
2
MIL–STD–202, Method 103,
Condition A
X7R Dielectric, 6.3 – 250Additional
VDCreeling
for Higher
Applications
or packagingReliability
3
C
Ceramic
1210
T
(L" x W")
Series
0402
0603
0805
1206
1210
1812
2220
T = COTS
104
Capacitance
Code (pF)
K
5
R
Dielectric
Tolerance
(VDC)
2 significant
J = ±5%
digits + number K = ±10%
of zeros
M = ±20%
9 = 6.3
8 = 10
4 = 16
3 = 25
5 = 50
1 = 100
2 = 200
A = 250
R = X7R
A
C1026_C0G_COTS_SMD • 4/16/2015
Failure Rate/Design
A = Testing per MIL–PRF–
55681 PDA 8%
B= Testing per MIL–PRF–
55681 PDA 8%, DPA per
EIA–469
C = Testing per MIL–PRF–
55681 PDA 8%, DPA per EIA–
469, Humidity per MIL–STD–202,
Method 103, Condition A
2
The terms "Marked" and "Unmarked" pertain to laser marking option of components.
1
C
TU
Termination
Finish1
Packaging/Grade
(C-Spec)2
C = 100%
Matte Sn
L = SnPb (5%
Pb minimum)
Blank = Bulk
TU = 7" Reel
Unmarked
TM = 7" Reel
Marked
1
2
C1027_X7R_COTS_SMD • 4/16/2015
1
33
Benefi
ts
Overview
•KEMET’s
-55°C toCommercial
+125°C operating
temperature
rangeTermination
“L” Series
with Tin/Lead
•surface
Reliable
and
robust
termination
system
mount capacitors in X7R dielectric are designed to meet
•theEIA
0402,
1206, 1210,
1812,
2220,
needs
of 0603,
critical0805,
applications
where1808,
tin/lead
end1825,
metallization
2225 KEMET’s
case sizestin/lead electroplating process is designed
is and
required.
•to DC
voltage
of 10lead
V, 16
V, 25 V,
50address
V, 100 V,concerns
200 V andfor250 V
meet
a 5% ratings
minimum
content
and
•a more
Capacitance
offerings
ranging
from
0.5
pF
up
to
0.47system.
μF
robust and reliable lead containing termination
•AsAvailable
capacitance
tolerances
of
±0.10
pF,
±0.25
pF,
±0.5 pF,
the bulk of the electronics industry moves towards RoHS
Metallization
±1%, ±2%,KEMET
±5%, ±10%,
and to
±20%
compliance,
continues
provide tin/lead terminated
Ceramic Capacitors
KEMET’s X7R dielectric features a 125°C maximum operating
Electronics Components, Assemblies & Materials Association (EIA)
characterizes X7R dielectric as a Class II material. Components of
this classification are fixed, ceramic dielectric capacitors suited for
bypass and decoupling applications or for frequency discriminating
circuits where Q and stability of capacitance characteristics are
SnPb End
not critical. X7R exhibits a predictable change in capacitance
Surface
Multilayer Ceramic Chip Capacitors (SMD MLCCs)
C0G Dielectric, 10 – 250
VDCMount
products
for(Commercial
military, aerospaceGrade)
and industrial applications and
with respect to time and voltage and boasts a minimal change in
Information
to 0.47
• Temperature
Range:
to source
+125°C
will
ensureμFcustomers
have a stable
and−55°C
long-term
of
supply.
C
1206
C
J
G
A
104
3
L
TU
Surface Mount
Commercial Off-The-Shelf (COTS) for Higher Reliability
Applications, C0G Dielectric, 10 – 250 VDC
Ceramic
(L" x W")
Series
Overview
Benefi
ts 0402
Capacitance
Code (pF)
Capacitance
Tolerance1
C = Standard
Two significant
B = ±0.10 pF
0603
digits +
C = ±0.25 pF
is an temperature
extension
of KEMET
0805program
number
of zeros.knowledge
D = ±0.5 pF
•KEMET’s
-55°C toCOTS
+125°C
operating
range
1206test regimes and requirements.
Use 9 for 1.0 KEMET
– 9.9 pF regularly
F = ±1%
of
high
reliability
• Temperature
stable dielectric Use 8 for 0.5 – .99 pF G = ±2%
1210
supplies
“up-screened”
products
by
working
with
customer
drawings
• Reliable and
1808robust termination system
ex. 2.2 pF = 229
J = ±5%
and
imposing
specifi
ed
design
and
test
requirements.
The
COTS
0.5 pF1812,
= 5081825,K = ±10%
• EIA 0402, 1812
0603, 0805, 1206, 1210,ex.1808,
program offers
the same high quality and high reliability components
M = ±20%
2220, and1825
2225 case sizes
2220
as up-screened
products, but at a lower cost to the customer. This is
• DC voltage2225
ratings of 6.3 V, 10 V, 16 V, 25 V, 50 V, 100 V,
accomplished by eliminating the need for customer-specific drawings
Rated Voltage
(VDC)
Dielectric
Failure Rate/
Design
Termination
Finish2
A = N/A
L = SnPb (5%
Pb minimum)
8 = 10
G = C0G
4 = 16
3 = 25 Test Level A
5 = 50
1 = 100
2 = 200 DWV
A = 250 IR@25°C
CAP
200 V, and 250 V
toAdditional
achieve capacitance
the reliabilitytolerance
level required
customer
applications.
A
offeringsfor
may
be available.
Contact KEMET
for details.
2
Additional
termination
finish options
maybeen
be available.
KEMET
series of tests
and inspections
have
selectedContact
to provide
thefor details
3
Additional
or packaging
may be available.
Contact
for details.
accelerated
conditioning
and options
100%
screening
necessary
to KEMET
eliminate
VDCreeling
(Commercial
Grade)
infant
mortal
failures
from
the
population.
Ordering
Information
Capacitance Range: 10 pF to 22 μF • Temperature Range: −55°C to +125°C
1
Blank = Bulk
TU = 7" Reel
Test Level B
Test Level C
DF
DWV
IR@25°C
CAP
DF
DWV
IR@25°C
CAP
DF
PDA 8%
PDA 8%
PDA 8%
C of C
DPA
DPA
C of C
85/85
C of C
C1019_C0G_SnPb_SMD • 4/16/2015
KEMET’s C0G dielectric features a 125°C maximum operating
C
8
R
C
C
1206
226
K
A
temperature and is considered “stable.” The Electronics Components,
Capacitance
Failure Rate/
Assemblies
Dielectric
Termination Finish1
Ceramic & Materials Association (EIA) characterizes C0G
(L" x W")
Series
Code (pF)
Tolerance
(VDC)
Design
dielectric as a Class I material. Components of this classification
0402
C = Standard 2 Significant Digits J = ±5%
9 = 6.3
R = X7R
A = N/A
L = SnPb (5% Pb
are temperature
compensating
and are suited for resonant
0603
+ Number of Zeros K = ±10%
8 = 10
minimum)
circuit applications
or
those
where
Q
and
stability
of
capacitance
0805
M = ±20%
4 = 16
characteristics1206
are required. C0G exhibits no change in capacitance
3 = 25
6 = 35
with respect to1210
time and voltage and boasts a negligible change in
1808
5 = 50
capacitance with
reference to ambient temperature. Capacitance
1 = 100
1812
change is limited
1825to ±30 ppm/ºC from -55°C to +125°C.
2 = 200
2220
Packaging/Grade
(C-Spec)3
TU
1
Packaging/Grade
(C-Spec)2
Blank = Bulk
TU = 7" Reel
Unmarked
TM = 7" Reel
Marked
A = 250
All COTS testing
2225includes voltage conditioning and post-electrical
testing as per MIL–PRF–55681. For enhanced reliability, KEMET also
1
2provides the following test level options and conformance certifications:
terms "Marked"
and "Unmarked"
pertain to laser marking
option of components.
C0G Dielectric, 10 – 250TheVDC,
Commercial
Off-The-Shelf
(COTS)
for Higher Reliability Applications
2
to 0.47 μF Information
C
Ceramic
1206
T
(L" x W")
Series
0402
0603
0805
1206
1210
1812
2220
T = COTS
104
Capacitance
Code (pF)
+ number of zeros
Use 9 for
1.0 – 9.9 pF
Use 8 for
0.5 – .99 pF
ex. 2.2 pF = 229
ex. 0.5 pF = 508
K
5
G
Dielectric
Tolerance1
(VDC)
B = ±0.10 pF
C = ±0.25 pF
D = ±0.5 pF
F = ± 1%
G = ±2%
J = ±5%
K = ±10%
M = ±20%
8 = 10
4 = 16
3 = 25
6 = 35
5 = 50
1 = 100
2 = 200
A = 250
G = C0G
A
Failure Rate/Design
A = Testing per MIL–PRF–
55681 PDA 8%
55681 PDA 8%, DPA per
EIA–469
C = Testing per MIL–
PRF–55681 PDA 8%, DPA
per EIA–469, Humidity per
MIL–STD–202, Method 103,
Condition A
3
C1018_X7R_SnPb_SMD • 4/16/2015
1
C
TU
Termination
Finish2
Packaging/Grade
(C-Spec)3
C = 100%
Blank = Bulk
Matte Sn
TU = 7" Reel
L = SnPb (5%
Pb minimum)
1
2
34
C1026_C0G_COTS_SMD • 4/16/2015
1
bypass and decoupling applications or for frequency discriminating
High
Temperature
150°C,characteristics
Ultra-Stable
X8R Dielectric,
circuits where
Q and stability of capacitance
are
not critical. X7R exhibits a predictable change in capacitance
25
– 100 VDC (Commercial & Automotive Grade)
with respect to time and voltage and boasts a minimal change in
Ceramic Capacitors
Surface Mount
Overview
All COTS testing includes voltage conditioning and post-electrical
testing as per
MIL–PRF–55681.
For enhanced
reliability,
KEMET
also
KEMET’s
Ultra-Stable
X8R dielectric
features
a 150°C
maximum
widely used in automotive circuits as well as general high temSnPb End Metallization
(cont.)
provides thetemperature,
following testoffering
level options
and conformance
certifications:
operating
the latest
in high temperature
perature applications.
dielectric
technology
and reliability
forChip
extreme
temperature
ap-for
VDC,Mount
Commercial
Off-The-Shelf
(COTS)
Higher Reliability Applications
Surface
Multilayer
Ceramic
Capacitors
(SMD
MLCCs)
Information
plications.
offers
the sameRange:
temperature
capability
as convenIn addition to commercial grade, automotive grade devices are
to 22 μF •ItTemperature
−55°C
to +125°C
tional X8R, but without the capacitance loss due to applied DC
available and meet the demanding Automotive Electronics CounC Ultra-Stable
1210
T exhibits no104
K
5
TU
voltage.
X8R
with
cil’sRAEC–Q200 qualifiA
cation requirements. C
High Temperature 150°C, X8L Dielectric, 10 – 50 VDC
Rated Voltage
Size and
Specifi
cation/ a minimal
Capacitance
Capacitance
respect
toCase
voltage
boasts
change
in capacitance
Ceramic
Dielectric
Failure Rate/Design
(L" x W")
Seriestemperature.
Code (pF)
Tolerancereplace(VDC)
Finish1
(C-Spec)2
with reference
to ambient
It is a suitable
0402 capacitance
T = COTS and 2larger
significant
J =devices
±5%
9 = fail
6.3
R = X7R A = Testing per MIL–PRF–
C = 100%
Blank = Bulk
ment for higher
footprint
that
Overview
0603
8 = 10
55681 PDA 8%
Matte Sn
TU = 7" Reel
to offer capacitance
stability. Capacitance
change with respect
to
0805
M = ±20% 4 = 16
L = SnPb (5% Unmarked
of zeros
temperature1206
is limited to ±15% from -55°C to +150°C. 3 = 25
55681 in
PDA
8%,
per circuit
Pbfailures.
minimum) Although
TM = 7" Reel
which can result
low
IRDPA
or short
1210
5 = 50
EIA–469
Marked
temperature1812
and is considered “general purpose high
fl
exible
termination
technology
does
not
eliminate
the
potential
1 = 100
C = Testing per MIL–PRF–
temperature.”
These components are fixed, ceramic dielectric
for mechanical
may
propagate during extreme
2220
2 = 200
55681damage
PDA 8%, that
DPA per
EIA–
Ultra-Stable X8R dielectric capacitors were developed for Acritical
= 250
469, and
Humidity
per MIL–STD–202,
environmental
handling
conditions, it does provide superior
applications where reliability and capacitance stability at higher
Method 103, Condition A
applications or frequency discriminating circuits where Q and
flex performance over standard termination systems.
operating temperatures are a concern. These capacitors are
1
stability
oftermination
capacitance
are not critical.
X8L for details.
Additional
finishcharacteristics
Contact KEMET
2
Additional
or packaging
options
may be available.
for details.
exhibits
a reeling
predictable
change
in capacitance
withContact
respectKEMET
to time
In addition to commercial grade, automotive grade devices
2
X8R
Dielectric,
– 100
VDC
(Commercial
& Automotive
Grade)
TheUltra-Stable
terms "Marked"
and "Unmarked"
pertain
to laser
marking
option
of components.
and
voltage
and boasts
a minimal
change
in25
capacitance
with
are available and
meet the demanding
Information
to
0.22
μF
•
Temperature
Range:
−55°C
to
+150°C
reference to ambient temperature up to 125°C. Beyond 125°C
C1027_X7R_COTS_SMD • 4/16/2015
1
1210
C
184
3
H
C
AUTO
C is limited to ±15% from -55°C to +125°C and
K +15, -40%
A
change
CasetoSize
Specification/
from
125°C
150°C.
Ceramic
(L" x W")
Series1
Capacitance
Code (pF)
Tolerance
(VDC)
F = ±1%
3 = 25
0402
C = for
Standard
2 significant
Driven by the
demand
a more robust
and reliable
0603
5 = 50
component,0805
X8L dielectric capacitors
were developed
for critical
of zeros
J = ±5%
1 = 100
applications1206
where reliability at higher operatingKtemperatures
= ±10%
1210 These capacitors are widely used
M =in±20%
are a concern.
automotive
1812 as general high temperature applications.
circuits as well
Concerned with flex cracks resulting from excessive tensile
cycling? These devices are available with KEMET's Flexible
termination technology which inhibits the transfer of board
Dielectric
H = Ultra
Stable X8R
Failure Rate/
Termination Finish2
Design
A = N/A
C = 100% Matte Sn
L = SnPb (5% Pb
minimum)
Packaging/Grade
(C-Spec)2
Blank = Bulk Bag
(Commercial Grade)
TU = 7” Tape & Reel/
Unmarked (Commercial
Grade)
AUTO = 7” Reel
(Automotive Grade)
AUTO 7411 = 13”
Reel/Punched Paper
(Automotive Grade)
AUTO 7210 = 13” Reel/
Embossed Plastic
(Automotive Grade)
Flexible termination option is available. Please see FT-CAP product bulletin C1013_X8R_FT-CAP_SMD
2,3
3Ordering Information
Additional
may be available.
KEMET for details.
μF
to 10 reeling
μF • Temperature
Range:
−55°C Contact
to +150°C
3
“Tape
Packaging Information”
sections
C & Reel
1210
X
106 of this document.
K
8
N
A
C
TU
3
Case
Size
Capacitance
Capacitance
Rated
Voltage
Failure
Rate/
Packaging/Grade
Specifi
cation/
3
2
The terms “Marked” and “Unmarked”
pertain to laser marking option of components.
Dielectric
Termination Finish
Ceramic
Code (pF)
Tolerance
(VDC)
Design
(C-Spec)3
(L" x W")
Series1
1
2
High Temperature 150°C, X8L Dielectric, 10 – 50 VDC (Commercial & Automotive Grade)
Capacitance Range: 0.012
0402
8 = 10
N = X8L
A = N/A
C = 100% Matte Sn
See "Packaging
Corporation
5928
• 4/16/2015
0603
X = Flexible • P.O. Box
digits
+ • Greenville,
K = ±10%SC 296063 (864)
= 25 963-6300 • www.kemet.com C1007_X8R_ULTRA_150C_SMD
L = SnPb (5% Pb
C-Spec
Ordering 1
0805
1206
1210
Termination
number of
zeros
M = ±20%
5 = 50
minimum)
Options Table"
below
2, 3
3
1
2
C1008_X8L_150C_SMD • 4/16/2015
1
35
flex situation, thus reducing the potential for catastrophic failure.
with flexible termination technology these devices offer the ultimate
• Lead (Pb)-Free, RoHS and REACH compliant
The Open Mode capacitor may experience a drop in capacilevel of protection against a low IR or short circuit condition. Open
• EIA 0805, 1206, 1210, 1812, 1825, 2220, and 2225 case sizes
tance; however, a short is unlikely because a crack will not
Mode devices compliment KEMET's Floating Electrode (FE• DC voltage rating of 250 V
typically
propagate
across
counter
electrodes
within
the
device’s
CAP) and Floating Electrode with Flexible Termination (FF-CAP)
Mountofferings
Multilayer
Ceramic
•Surface
Capacitance
ranging
fromChip
1,000Capacitors
pF to 6.8 μF(SMD MLCCs)
“active area.” Since there will not be any current leakage associproduct lines by providing a fail-safe design optimized for mid to
• Available capacitance tolerances of ±10% and ±20%
ated with a typical Open Mode flex crack, there is no localized
high range capacitance values. These devices exhibit a predictheating and therefore little chance for a catastrophic and potenable change in capacitance with respect to time and voltage and
tially costly failure event.
boast a minimal change in capacitance with reference to ambient
temperature. Capacitance change is limited to ±15% from -55°C
SnPb End Metallization (cont.)
Driven by the demand for a more robust and reliable comto +125°C.
Telecom “Tip and Ring”
X7RtheDielectric,
250 VDC
(Commercial
Overview
ponent,
Open Mode capacitor
was designed
for critical & Automotive Grade)
Information
to 1.2 μF •where
Temperature
Range:
−55°C to and
+125°C
applications
higher operating
temperatures
mechaniKEMET’s
Floating
Electrode
(FE-CAP)
multilayer
ceramic
Combined with the stability of an X7R dielectric, the FE-CAP
cal stress are a concern.
These
capacitors
are widely
used in
C
1825
C
105
K
A
R
A
C
TUa
capacitor
in
X7R
dielectric
utilizes
a
cascading
internal
electrode
complements
KEMET’s
“Open
Mode” devices
by providing
automotive circuits as well as power supplies (input and output
design
confi
gured
to
form
multiple
capacitors
in
series
within
a
fail-safe
design
optimized
for
low
to
mid
range
capacitance
Case
Size
Specifi
cation/
Capacitance
Capacitance
Rated
Voltage
Failure
Rate/
Packaging/Grade
filters)
and general electronic applications.
Dielectric
Termination Finish1
Ceramic
single
monolithic
This unique Code
confi(pF)
guration results
in
values.
exhibit a predictable
(L" x W")structure.
Series
Tolerance
(VDC) These devices Design
(C-Spec)2
enhanced
voltage
and
ESD
performance
over
standard
capacitor
with
respect
to
time
and
voltage
and
boast
a
minimal
change
0805flex cracks
C = Standard
digits + tensile
J = ±5%
A = 250
R = X7R
A = N/A
C = 100% Matte Sn Blank = Bulkin
Concerned with
resulting2 signifi
from cant
excessive
1206
X =for
Flexible
number
of zeros
K = ±10%
L = SnPb
(5% Pb
TU
= 7" Reel
designs
while
allowing
a
fail-open
condition
if
mechanically
capacitance
with
reference
to
ambient
temperature.
Capacitance
and shear stresses
produced
during board flexure andMthermal
1210
Termination
= ±20%
minimum)
Unmarked
damaged
(cracked).
If
damaged,
the
device
may
experience
change
is
limited
to
±15%
from
-55°C
to
+125°C.
cycling? These
1812devices are available with KEMET's Flexible
TM = 7" Reel
aSurface
drop in Mount
capacitance
but
a Ceramic
short
is unlikely.
The FE-CAP
is MLCCs)
1825 Multilayer
Marked
Chiptransfer
Capacitors
(SMD
termination
technology
which
inhibits
the
of board
designed
to 2220
reduce
the likelihood
of a low mitigating
IR or shortflcircuit
stress to the
rigid ceramic
body, therefore
ex cracks
2225
condition
theinchance
a catastrophic
and potentially
which canand
result
low IR for
or short
circuit failures.
Although flcostly
ex1failure event.
Additional
termination
fi
nish
options
may
be
available.
Contact
KEMET
for
details.
ible termination technology does not eliminate the potential for
Ceramic Capacitors
Surface Mount
Floating Electrode Design (FE-CAP), X7R Dielectric,
Flexible Termination System (FT-CAP) X7R Dielectric,
6.3
– 250 VDC (Commercial & Automotive Grade)
2
Driven by the
demand
for a more robust
X7R
Dielectric,
16 – and
200reliable
VDCcomponent,
the
FE-CAP
designed
for• P.O.
critical
where
Ordering
Information
to
6.8Electronics
μFwas
• Temperature
Range:
to
+125°C
© KEMET
Corporation
Box applications
5928−55°C
• Greenville,
SC 29606 (864) 963-6300 • www.kemet.com
Overview
higher operating temperatures and mechanical stress are a
C1011_X7R_TIP_RING_SMD • 4/16/2015
1
concern.
C These
1210capacitors Jare manufactured
685in state of theKart
3
R
A
C
TU
KEMET’s
(FT-CAP)
multilayer
ceramic
Combined with the stability of an X7R dielectric and designed to
ISO/TS 16949:2009
certifi
ed
facilities
and
are
widely
used
in
Specifiincorporates
cation/
Capacitance
Capacitance Rated
Voltage
Failure Rate/
Termination
capacitor
inCase
X7RSize
dielectric
aand
unique,
flexible
accommodate
all capacitance
requirements,
these flPackaging/Grade
ex-robust 2
Ceramic
Dielectric
power
supplies
(input
andSeries
output filters)Code
general
electronic
(L" x W")
(pF)
Tolerance
(VDC)
Design
Finish1
(C-Spec)
termination
system
that
is
integrated
with
KEMET’s
standard
devices
are
RoHS-compliant,
offer
up
to
5
mm
of
fl
ex-bend
applications.0805
K = ±10%
4 = 16
R = X7R
A = N/A
C = 100%
See "Packaging
termination materials. A conductive silver epoxy is utilized
capability and exhibit a predictable change
in capacitance
with
1206
J = Open Mode digits + number of M = ±20%
3 = 25
Matte Sn
C-Spec
between the 1210
base metal
nickel barrierzeros
layers of KEMET’s
to time and voltage. Capacitance
change with reference
withand
Flexible
5respect
= 50
L = SnPb
Ordering to
1812
Termination
1ambient
= 100 temperature is limited to ±15%
(5%from
Pb -55°C to
Options
Table"
system
in order to establish pliability
+125°C.
2 = 200
minimum)
below
while maintaining terminal strength, solderability and electrical
performance. This technology was developed in order to
In addition to commercial grade, automotive grade devices are
1address the primary failure mode of MLCCs– flex cracks, which
Additional termination finish options may be available. Contact KEMET for details.available which meet the demanding Automotive Electronics
1, 2
termination
finish option
is not available
on and
automotive
product.
areSnPb
typically
the result
of excessive
tensile
sheargrade
stresses
2
Additional
reeling
or
packaging
options
may
be
available.
Contact
KEMET
details.
produced
during
board
fl
exure
and
thermal
cycling.
Flexible
Floating Electrode Design (FE-CAP), X7R Dielectric, 6.3 – 250 VDCfor(Commercial
& Automotive Grade)
termination
inhibits the
transfer
of board
stress to the
Information
to 0.22 μFtechnology
• Temperature
Range:
−55°C
to +125°C
rigid
ceramic
body,Corporation
therefore •mitigating
flex• cracks
which
can (864) 963-6300 • www.kemet.com C1012_X7R_OPENMODE_SMD • 4/16/2015 1
© KEMET
Electronics
P.O. Box 5928
Greenville,
SC 29606
result
IR or short circuit
C in low0805
S failures. 104
K
5
R
A
C
TU
Capacitance
Capacitance
Ceramic this technology does not eliminate the potential
Although
(L" x W")
Series
Code (pF)
Tolerance
for mechanical
that may2propagate
during
0402damage
S = Floating
significant digits
+ extreme
J = ±5%
environmental
and handling
conditions,
superior
0603
Electrode
numberitofdoes
zerosprovide
K = ±10%
0805 over standard termination systems.
M FT-CAP
= ±20%
flex performance
1206
complements1210
KEMET’s Open Mode, Floating Electrode (FECAP), Floating
1812Electrode with Flexible Termination (FF-CAP)
and KEMET Power Solutions (KPS) product lines by providing a
complete portfolio of flex mitigation solutions.
Rated Voltage
(VDC)
9 = 6.3
8 = 10
4 = 16
3 = 25
5 = 50
1 = 100
2 = 200
A = 250
Dielectric
Failure Rate/
Design
Termination
Finish1
Packaging/
Grade (C-Spec)2
R = X7R
A = N/A
C = 100%
Matte Sn
L = SnPb (5%
Pb minimum)
See
"Packaging
C-Spec
Ordering
Options
Table" below
2
1
1,2
Flexible Termination System (FT-CAP) X7R Dielectric, 6.3 – 250 VDC (Commercial & Automotive Grade)
to 22 μF • Information
C
1206
X
Ceramic
(L" x W")
Series
0603
0805
1206
1210
1808
1812
1825
2220
2225
X = Flexible
Termination
106
K
4
Capacitance
Code (pF)
Capacitance
Tolerance
Rated Voltage
(VDC)
2 significant
digits +
number of
zeros
J = ±5%
K = ±10%
M = ±20%
9 = 6.3
8 = 10
4 = 16
3 = 25
5 = 50
1 = 100
2 = 200
A = 250
C1014_X7R_FE-CAP_SMD • 4/16/2015
1
R
A
C
AUTO
Dielectric
Failure Rate/
Design
Termination
Finish1
Packaging/Grade
(C-Spec)2
R = X7R
A = N/A
C = 100%
Matte Sn
L = SnPb (5%
Pb minimum)
See
"Packaging
C-Spec
Ordering
Options Table"
below
2
1
1,2
36
C1013_X7R_FT-CAP_SMD • 4/16/2015
1
capacitors
utilize
a proprietary
technology
to
RoHS legislation. Available in X7R dielectric, these devices are
shear stresses
produced
duringlead-frame
board flexure
and thermal
vertically
capable of Pb-Free reflow profiles and provide lower ESR, ESL
cycling. stack one or two multilayer ceramic chip capacitors
into a single compact surface mount package. The attached
and higher ripple current capability when compared to other
lead-frame
mechanically
isolates
the capacitor/s
from the
dielectric solutions.
Although neither
technology
can eliminate
the potential
for
Surface
Mount
Multilayer
Ceramic
Capacitors
(SMD MLCCs)
printed
circuit
board,
therefore
offeringChip
advanced
mechanical
mechanical
damage
that
may propagate
during extreme
and
thermal stress
performance.
Isolation also
addresses of
Combined with the stability of an X7R dielectric, KEMET’s KPS
environmental
and/or
handling conditions,
the combination
concerns
audible, microphonic
thatlevel
may of
occur
when
Series devices exhibit a predictable change in capacitance
these two for
technologies
provide thenoise
ultimate
protection
aagainst
bias voltage
is
applied.
A
two
chip
stack
offers
up
to
double
a low IR or short circuit condition. The FF-CAP
SnPb End Metallization
(cont.)
the capacitance
in the same or smaller design footprint when
compared
to
traditional
surface
mount
MLCCs
devices.
is limited to ±15% from -55°C to +125°C.
Floating Electrode Design with Flexible Termination System (FF-CAP), X7Rchange
Dielectric,
Providing
up to 10 mm of board flex capability, KPS Series
Overview
Ceramic Capacitors
Surface Mount
to 0.22Power
μFInformation
• Solutions
Temperature
−55°C
to +125°C
KEMET
(KPS) Range:
High Voltage
stacked
capacitors
KEMET’s KPS Series devices in X7R dielectric exhibit a
utilize a proprietary lead-frame technology to vertically stack one
predictable change in capacitance with respect to time and
Benefi
ts 0805
C multilayer
104
K
5
R a minimal change
A
C
TU
or two
ceramic Ychip capacitors
into a single compact
voltage,
and boast
in capacitance
with reference
Failure
Rate/
Termination
Case
Size
Specifi
cation/
Capacitance
Capacitance
Rated
Voltage
Packaging/
package.
The attached
lead-frame
to ambient temperature.
Capacitance change is limited to ±15%
Dielectric
Ceramic
•surface
-55°Cmount
to +125°C
operating
temperature
range mechanically
1
Design
x W")
Series
Code (pF)
Tolerance
(VDC)
(C-Spec)2
the(L"
capacitor(s)
from the printed
from -55°C to +125°C. These
devices are Finish
capable ofGrade
Pb-Free
•isolates
Reliable
and
robust termination
systemcircuit board, thereby
0603 mechanical
Y = Floatingand2 signifi
cantstress
digits performance.
J = ±5%
9 = 6.3
R =and
X7Rprovide lower
A = N/AESR, ESL
C = 100%
See
advanced
thermal
reflow profiles
and higher ripple
•offering
EIA 1210,
1812, and
2220 case+sizes
0805
Electrode
number of zeros K = ±10%
8 = 10
Matte Sn
"Packaging
Isolation
also
addresses
concerns
for
audible
microphonic
current
capability
when
compared
to
other
dielectric
solutions.
• DC voltage1206
ratingswith
of 10
V, 16 V, 25 V, 50 V, 100 MV,=and
250 V 4 = 16
Flexible
±20%
L = SnPb (5%
C-Spec
that may
when
a biasfrom
voltage
is applied.
two-chip 3 = 25
1210occur
Termination
Pb minimum)
Ordering
•noise
Capacitance
offerings
ranging
0.1 μF
up to 47AμF
1812to double the capacitance in the same or smaller 5 = 50Conventional uses include both snubbers and filters inOptions
Table"
offers capacitance
up
applications
•stack
Available
1 = 100
below
design
footprint
when
compared
to
traditional
surface
mount
such
as
switching
power
supplies
and
lighting
ballasts.
Their
• Higher capacitance in the same footprint
2 = 200
devices.
Providing
upCeramic
to 10 mmChip
of board
flex capability,
exceptional performance at high frequencies has made high
Surface
Mount
Multilayer
Capacitors
(SMD MLCCs)
A = 250
•MLCC
Potential
board
space savings
KPS
Series
High
Voltage
capacitors
are
environmentally
friendly
•1 Additional
Advanced
protection
thermal
and mechanical
stress
termination
finishagainst
options may
be available.
Contact KEMET
for details.
and
in
compliance
with
RoHS
legislation.
1,2
• SnPb
Provides
up to fi10
of board
flex capability
termination
nishmm
option
is not available
on automotive grade product.
2
Additional
reeling
or
packaging
options
may
be
available.
Contact
KEMET
for
details.
Bulk Capacitance
KPS Series, X7R Dielectric, 10 – 250 VDC (Commercial Grade)
KPS HT Series, High Temperature 150°C, X8L Dielectric,
10 – 50 VDC (Commercial & Automotive Grade)
Overview
C1015_X7R_FF-CAP_SMD • 4/16/2015
1
C Power
106 (KPS HT)Mstacked
Benefi
ts2220Solutions CHigh Temperature
KEMET
5 125°C, X8L
R displays a wider
C
7186
2 variation in capacitance.
Capacitance
Case
Sizea proprietary
Specification/lead-frame
Capacitance
Capacitance
Rated Voltage
Leadframe
Packaging/Grade
capacitors
utilize
technology
to
change
is
limited
to
±15%
from
-55°C
to
+125°C
and
+15,
-40%
Ceramic
Dielectric
Failure Rate/Design
1
(L"+125°C
x W")
Series
Code
(pF)
Finish2
(C-Spec)3
• -55°C tostack
temperature
range
vertically
one operating
or two
multilayer
ceramic
chipTolerance
capacitors (VDC)from 125°C to 150°C.
• Reliable
robustC surface
system
1210
=termination
Standard
2 signifi
cant The
K =attached
±10%
8 = 10
R = X7R 1 = KPS Single Chip Stack C = 100% 7186 = 7" Reel
into
a singleand
compact
mount
package.
1812
+
M = ±20%
4 = 16
2 = KPS Double Chip Stack Matte Sn
Unmarked
•lead-frame
EIA 2220mechanically
case size isolates the digits
capacitor(s)
from
the
In
addition
to Commercial grade, Automotive grade devices
3 = 25
2220
number of
7289 = 13" Reel
•printed
DC voltage
ratings
of
500
V
and
630
V
circuit board, thereby offering advanced
mechanical 5 = 50 are available and meet the demanding Automotive Electronics
zeros
Unmarked
• Capacitance
offerings
ranging from
0.047
µFaddresses
up to 1.0 µF 1 = 100 Council's AEC-Q200 qualification requirements.
and
thermal stress
performance.
Isolation
also
• Available
tolerancesnoise
of ±10%
concerns
forcapacitance
audible, microphonic
that and
may±20%
occur when A = 250
1a bias voltage is applied. A two-chip stack offers up to double
Double chip stacks ("2" in the 13th character position of the ordering code) are only available in M (±20%) capacitance tolerance. Single chip stacks ("1" in the
the13th
capacitance
in theofsame
or smaller
footprint
when or M (±20%) tolerances.
character position
the ordering
code) design
are available
in K (±10%)
2
compared
to Dielectric,
traditional
mount
MLCC
devices.
Providing
Additional
leadframe
finish surface
options
may
be
available.
Contact
KEMET
for details. Grade)
KPS Series, High Voltage,
X7R
500
–
630
VDC
(Commercial
3
Additional
reeling
or packaging
options mayKPS
be available.
KEMET for details.
Ordering
up
toto10
of• board
flex capability,
Series Contact
capacitors
1.0mm
μFInformation
Temperature
Range:
−55°C
to +125°C
©
KEMET
Corporation
• P.O.
Box 5928
• Greenville,
SC are
29606 (864) 963-6300
• www.kemet.com
• 4/16/2015
1
C Electronics
2220
C X8L
105these
M
C
R
2 C1020_X7R_KPS_SMD
C
7186
legislation.
Combined
with
dielectric,
devices
capable ofCase
reliable
up to 150°C
and are well
suited forRated Voltage
Size operation
Specification/
Capacitance
Capacitance
Failure Rate/
Leadframe
Packaging/Grade
Ceramic
Dielectric
(L"x W") filtering,
Series
(pF)
Tolerance1
(VDC)
Design
Finish2
(C-Spec)3
high temperature
bypass andCode
decoupling
applications.
2220
C=
K = ±10%
C = 500
Standard
of zeros. with
M =respect
±20% to B = 630
X8L exhibits a predictable
changenumber
in capacitance
with reference to ambient temperature up to 125°C. Beyond
1
R = X7R
1 = KPS Single
Chip Stack
2 = KPS Double
Chip Stack
C = 100%
Matte Sn
2
3
Additional reeling
Ordering
Information
7186 = 7" Reel/
Embossed Plastic
7289 = 13" Reel/
Embossed Plastic
KPS HT Series, High Temperature 150°C, X8L Dielectric, 10 – 50 VDC (Commercial & Automotive Grade)
Capacitance Range: 0.47 μF to 47 μF • Temperature Range: −55°C to +150°C
© KEMET
5928 • Greenville,MSC 29606 (864)4 963-6300 • www.kemet.com
C Electronics
2220 Corporation
C • P.O. Box476
N
2
Ceramic
(L"x W")
Series
1210
2220
C=
Standard
Capacitance
Code (pF)
2 significant
digits + number
of zeros.
Dielectric
Tolerance1
(VDC)
K = ±10%
M = ±20%
8 = 10
4 = 16
3 = 25
5 = 50
N = X8L
C1036_X7R_KPS_HV_SMD
• 4/16/2015
C
7186
1
Failure Rate/
Design
Leadframe
Finish
Packaging/Grade
(C-Spec)
1 = KPS Single
Chip Stack
2 = KPS Double
Chip Stack
C = 100%
Matte Sn
AUTO = Auto Grade 7"Reel
(Embossed Plastic)
AUTO 7289= Auto Grade
13" Reel (Embossed
Plastic)
2
3
3
3
1
37
place of the “M” for T level
product.
number of
zeros
E = 500
J = Formed "J"
K = Formed "J"
Ceramic Capacitors
Indicates performance and reliability requirements. "B" level represents standard reliability."T" level represents high reliability.
Please refer to performance specification sheet MIL–PRF–49470 for details regarding test levels. The latest revision of the specification sheet is available
through DSCC.
1, 3
Test level option "T" is not available on encapsulated stacked devices (i.e. MIL–PRF–49470/2).
2
Dielectric classification and characteristic details are outlined in the "Electrical Parameters" section of this document.
4
Lead configuration and dimension details are outlined in the "Dimensions" section of this document.
1
1
Surface Mount
Bulk CapacitanceKPS
(cont.)
MIL Series, SMPS Stacks Ordering Information
not use this
ordering code25
if a–QPL
MIL–SPEC
part type is required.
Please order
using MIL–SPEC
KPS MIL Series, SMPS(Do
Stacked
Capacitors,
1,000
VDC (Commercial,
Military,
& Space
Grades)ordering code. Details
regarding
MIL–PRF–49470
QPL
ordering
information
is outlined
above.)
Surface
Multilayer Ceramic
Chip
Capacitors
(SMD
MLCCs)
to 75Mount
μF
• Temperature
Range:
−55°C
to +125°C
HighL1Temperature
150°C,
Ultra-Stable
X8R
Dielectric,
R
N
30
C
106
K
25 – 100 VDC
(Commercial
&
Automotive
Grade)
Dielectric
Case Size/ Rated
Lead
Capacitance Capacitance
Case Code
Product Family1 Classification/
Configuration3
Characteristic2
(CC)
Voltage
(VDC)
Code (pF)
Tolerance
S
12
Testing Option4
Maximum Height
Dimension (in.)5
L1 =
Q = BQ
N = Straight
30 = CC 3 3 = 25
Two
J = ±5%
B = M49470 "B" Level Unencapsulated Encapsulated
R = BR
L = Formed "L" 40 = CC 4 5 = 50
significant K = ±10% T = M49470 "T" Level 12 = 0.12"
27 = 0.27"
L2 =
X = BX
M = Formed "L" 50 = CC 5 1 = 100
digits +
M = ±20% C = DSCC87106
24 = 0.24"
39 = 0.39"
Encapsulated
W = X7R
J = Formed
"J"
= 200
number
of used in automotive
S = Commercial
36 =as
0.36"
53 =tem0.53"
KEMET’s
Ultra-Stable
X8R dielectric
features
a 150°C 2maximum
widely
circuits as well
general high
Formed
C = 500
zeros
X = Non-Standard
48 = 0.48"
66 = 0.66"
operating temperature, offeringK =the
latest"J"in high temperature
perature applications.
Surface Mount and Through-Hole Multilayer Ceramic Chip Stacked
– KPS MIL Series, SMPS (Customer
Stacked Capacitors
B Capacitors
= 630
Specific
65 = 0.65"
80 = 0.80"
dielectric Mount
technology
and reliability
forChip
extreme
temperature
ap-MLCCs)
Surface
Multilayer
Ceramic
Capacitors
D(SMD
= 1,000
Requirements)
Overview
Unencapsulated
plications. It offers the same temperature capability as convenIn addition to commercial grade, automotive grade devices are
High
Temperature
150°C,
X8L
Dielectric,
10 – 50a QPL
VDC
, TestX8R,
level
option
"T" is not
available
on encapsulated
stacked
devices,
i.e., MIL–PRF–49470/2.
MIL–Spec
part type
is required, please
order using
the
MIL–PRF–49470
Ordering
Information
tional
but
without
the
capacitance
loss
due
to
applied
DC
available andIfmeet
the
demanding
Automotive
Electronics
CounMIL–PRF–49470,
DSCC 87106
MIL–Spec
ordering
code.
voltage. Ultra-Stable X8R
no change in capacitance
(Commercial
&exhibits
Automotive
Grade) with cil’s AEC–Q200 qualification requirements.
1 4
2
respect
toM49470
voltage and boasts a minimal
R change in capacitance01
474
K
C
N
3
Lead configuration and dimension details are outlined in the "Dimensions" section of this document. Additional lead configurations may be available. Contact
with
reference
to ambient
Itcation/
is a suitable
replace-Specification Sheet
Performance
Specifi
cation temperature.
Dielectric Classifi
Performance
Capacitance Capacitance Rated Voltage
Lead
KEMET
for details.
2
3
4 Indicating
ment
for higher
capacitance
and
larger footprint
devices
that fail
MIL–PRF–49470
Characteristic
Number
Code (pF)
Tolerance
(VDC)
Indicates
performance
and 1reliability
requirements.
Testing
option(Indicating
details
areMIL–PRF–49470/1)
outlined in the "Performance
& Reliability"
section of this
document. Configuration4
Overview
4
Please
performance
specifi
for additional
revision of A
the= specifi
is Pin
to
offer refer
capacitance
stability.
change01with
respect
to details regarding test levels.
M49470
= Btolevel
Q Capacitance
= cation
BQ sheet MIL–PRF–49470
= Unencapsulated
Two The latest
J = ±5%
50 cationNsheet
= Straight
available= through
DSCC.to ±15%
T49470
T level
R = BR
02 = Encapsulated
significant
K = ±10%
B = 100
L = Formed "L"
temperature
is
limited
from
-55°C
to
+150°C.
4
DSCC
Drawing
87106
DSCC+Drawing
A “T” prefi
x is used
in was cancelled
X = BXon 01/03/2005. MIL–PRF–49470 capacitors are preferred over digits
M =87106
±20%capacitors.
C = 200
M = Formed "L"
5 place of the “M”
temperature
anddimensions
“general
purpose
high
exible termination
technology
does not Eeliminate
forisTconsidered
level are provided
number
of
= 500 the Jpotential
= Formed "J"
Maximum height
in product
tables
1A, 1B, and 1C of thisfldocument
Driven
by the demand
for a more robust
andceramic
reliabledielectric
component, for mechanical damage
product.
zeros that may propagate during extreme
K = Formed "J"
temperature.”
These components
are fixed,
Ultra-Stable
X8R for
dielectric
capacitors were
developed
for critical environmental and handling conditions, it does provide superior
capacitors
suited
high temperature
bypass
and
decoupling
1
Indicates performance
and reliability
requirements.
"B"stability
level
represents
standard
reliability."T"
level represents high reliability.
Ordering
Information
Requirements
per
DSCC
Drawing
87106
applications
where
reliability
and
capacitance
at
higher
applications
orperformance
frequency discriminating
circuits
where Q
and
flex performance
over
systems.
1
Please
refer to
specifion
cation
sheet
MIL–PRF–49470
for details
regarding
test levels.
The
latest
of the
specifi
cation
sheet
is available
DSCC
Drawing
87106
was
cancelled
01/03/2005.
Customers
can
continue
to
order
per
87106
requirements
usingrevision
the original
DSCC
ordering
code,i.e.,
87106–001.
temperatures
are a concern. are
These
capacitors
are
stability
of
capacitance
characteristics
not
critical.
X8L
through
DSCC.
High Temperatureoperating
(>
125ºC)
When available, MIL–PRF–49470 devices are preferred over DSCC Drawing 87106. The MIL–PRF–49470 military specification product provides additional quality
1, 3
Test level
option "T"that
is not
on encapsulated
stacked
devices
(i.e. MIL–PRF–49470/2).
exhibits
aprovisions
predictable
change
in capacitance
with
respect
to time
In addition
commercial
grade, automotive grade devices
assurance
areavailable
not required
by the DSCC
drawing.
These
extra
provisions
create to
a more
robust replacement.
2
Dielectric
classifi
and
details are
outlined
in theVDC
"Electrical
Parameters"
section
of this
document.
Ultra-Stable
X8R
Dielectric,
–
100
(Commercial
&
Automotive
Grade)
and
voltage
andcation
boasts
acharacteristic
minimal
change
in25
capacitance
with
are available
and
meet
the demanding
4
Information
configuration
and dimension details are outlined in the "Dimensions" section of this document.
reference
temperature
up to −55°C
125°C. Beyond
125°C
toLead
0.22
μFto •ambient
Temperature
Range:
to +150°C
1210
C from
3 963-6300 H
C
AUTO
C MIL
K +15,
A C1031_KPS_SMPS_49470_STACKS
©
KEMET
• P.O.
Box184
5928
• Greenville,
SCInformation
29606
• www.kemet.com
• 4/16/2015 2
change
isElectronics
limited
toCorporation
±15%
-55°C
to +125°C
and
-40%(864)
KPS
Series,
SMPS
Stacks
Ordering
Case
Size
Specifi
cation/
Capacitance
Capacitance
Rated
Voltage
Failure
Rate/
Packaging/Grade
from
125°C
to
150°C.
(Do
not use this ordering code if a QPL MIL–SPEC part type is required.
Please order using
MIL–SPEC ordering code. Details
Dielectric
Termination Finish2
Ceramic
x W")
Series1 QPL ordering
Code (pF) information
Tolerance is outlined
(VDC) above.)
Design
(C-Spec)2
regarding(L"MIL–PRF–49470
0402
C = for
Standard
2 significant
F = ±1%
3 = 25
H = Ultra
A = N/A
C = 100% Matte Sn Blank = Bulk Bag
Driven by the
demand
a more robust
and reliable
0603
digits +were
number
G = ±2%for critical
5 = 50
Stable X8R
L = SnPb (5% Pb
(Commercial Grade)
component,
X8L
dielectric
capacitors
developed
L1 0805
R
Nof zeros
30
K
Sminimum)
12Tape & Reel/
J = ±5% C 1 = 100 106
TU = 7”
applications1206
whereDielectric
reliability at higher operating
temperatures
= ±10% Rated
Unmarked (Commercial
CaseKSize/
Leadwidely used
Maximum
12101 These
M =in±20%
Grade) Height
are
a concern.
are
automotive
Product
Family
Classificapacitors
cation/
Voltage
Testing Option4
3 Case Code
5
Code (pF) Tolerance
Dimension
2 Configuration
1812 as
AUTO = 7”(in.)
Reel
Characteristic
(CC)
(VDC)
circuits as well
general high
temperature applications.
(Automotive Grade)
Concerned
with flex
resulting
from excessive
L1 =
Q =cracks
BQ
N = Straight
30 = CC 3tensile
3 = 25
Two
J = ±5%
B = M49470 "B" Level Unencapsulated
AUTO 7411Encapsulated
= 13”
Unencapsulated
R
=
BR
L
=
Formed
"L"
40
=
CC
4
5
=
50
signifi
cant
K
=
±10%
T
=
M49470
"T"
Level
12
=
0.12"
27 =Paper
0.27"
Reel/Punched
L2 =
X = BX
M = Formed "L" 50 = CC 5 1 = 100
digits +
M = ±20% C = DSCC87106
24 = 0.24"
39
= 0.39"
(Automotive
Grade)
cycling?
These devices
are available
with KEMET's Flexible
Encapsulated
W = X7R
J = Formed "J"
2 = 200
number of
S = Commercial
36 = 0.36"
0.53"
AUTO 721053= =13”
Reel/
termination technology which inhibits
the"J"transfer of board
K = Formed
C = 500
zeros
X = Non-Standard
48 = 0.48"
= 0.66"
Embossed66
Plastic
630
(Customer Specific
65 = 0.65"
80Grade)
= 0.80"
stress to the rigid ceramic body, therefore mitigating flexB =cracks
(Automotive
D = 1,000
Requirements)
Flexible termination option is available. Please see FT-CAP product bulletin C1013_X8R_FT-CAP_SMD
, Test level option "T" is not available on encapsulated stacked devices, i.e., MIL–PRF–49470/2. If a QPL MIL–Spec part type is required, please order using the
MIL–Spec ordering code.
2,3
2 SnPb termination fi nish option is not available on automotive grade product.
3Ordering Information
may be available.
Contact
KEMET for details.
3 Additional
μF
to confi
10 reeling
μF • Temperature
Range:
−55°C
to"Dimensions"
+150°C
Lead
guration
and dimension details
are outlined
in the
section of this document. Additional lead configurations may be available. Contact
3
KEMET for details.
“Tape
&
Reel
Packaging
Information”
sections
of
this
document.
4
C
1210
106
K details are outlined
8
N
C this document. TU
Indicates
performance
andXreliability requirements.
Testing option
in the "Performance
&A
Reliability" section of
3
4 For additional Information regarding “AUTO” C-Spec options, see “Automotive C-Spec Information” section of this document.
Please
refer
to
performance
specifi
cation
sheet
MIL–PRF–49470
for
additional
details
regarding
test
levels.
The
latest
revision
of
the specification
sheet is
Case
Size
Capacitance
Capacitance
Rated
Voltage
Failure
Rate/
Packaging/Grade
Specifi
cation/
3
The terms “Marked” and “Unmarked”
pertain to laser marking option of components.
Dielectric
Termination Finish2
Ceramic
available(L"through
Code (pF)
Tolerance
(VDC)
Design
(C-Spec)3
x W") DSCC.
Series1
4
DSCC Drawing 87106 was cancelled on 01/03/2005. MIL–PRF–49470 capacitors are preferred over DSCC Drawing 87106 capacitors.
0402
8 = 10
N = X8L
A = N/A
C = 100% Matte Sn
See "Packaging
5
Maximum
height
dimensions
are
provided
in
product
tables
1A,
1B,
and
1C
of
this
document
©
KEMET Electronics
Corporation
•
P.O.
Box
5928
•
Greenville,
SC
29606
(864)
963-6300
•
www.kemet.com
C1007_X8R_ULTRA_150C_SMD
• 4/16/2015
0603
X = Flexible
digits +
K = ±10%
3 = 25
L = SnPb (5% Pb
C-Spec
Ordering 1
1
1 4
2
High Temperature 150°C, X8L Dielectric, 10 – 50 VDC (Commercial & Automotive Grade)
38
0805
Termination
number of
M = ±20%
5 = 50
minimum)
Options Table"
1206
zeros
below
Ordering1210Information Requirements per DSCC Drawing 87106
DSCC Drawing 87106 was cancelled on 01/03/2005. Customers can continue to order per 87106 requirements using the original DSCC ordering code,i.e., 87106–001.
When available, MIL–PRF–49470 devices are preferred over DSCC Drawing 87106. The MIL–PRF–49470 military specification product provides additional quality
assurance provisions that are not required by the DSCC drawing. These extra provisions create a more robust replacement.
1
2
2, 3
3
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1031_KPS_SMPS_49470_STACKS • 4/16/2015 2
Components
this classifi
cation
are temperature
surface mountofC0G
Multilayer
Ceramic
Capacitorscompensating
(MLCCs) are
to ±30ppm/ºC from -55°C to +200°C. In addition, these capacitors
Surface
Mount
(SMD MLCCs)
constructed
of a Multilayer
robust and Ceramic
proprietaryChip
baseCapacitors
metal electrode
exhibit high insulation resistance with low dissipation factor at
Ceramic Capacitors
Surface Mount
(BME) dielectricTermination
system that offers industry-leading
performance Ultra-Stable
elevated temperaturesX8R
up to 200°C. They also exhibit low ESR
Flexible
System (FT-CAP),
at extreme temperatures. These surface mountable devices
at high frequencies and offer superior volumetric efficiency over
Dielectric,
25 – operating
100 VDC
(Commercial
&competitive
Automotive
Grade)
feature a 200ºC maximum
temperature
and are
high temperature
precious metal electrode (PME) and
specifically designed to withstand the demands of harsh
base metal electrode (BME) dielectric system devices.
industrial environments such as oil exploration and automotive/
These devices are Lead (Pb)-Free, RoHS and REACH compliant
avionics
engine compartment circuitry. They also offer
Overview
without the need of any exemptions.
High Temperaturehigher
(> and
125ºC)
(cont.)
more uniform
breakdown voltage performance
than competitive
resulting
in increased
yields
in
KEMET’s
Flexibleproducts,
Termination
(FT-CAP)
Multilayer
Ceramic
Combined with the stability of KEMET’s Ultra-Stable high
C0GfiineldDielectric,
10dielectric
– dealing
200incorporates
VDC
(Industrial
customer
applications.
When
with expensive
high Grade)
Capacitor
Ultra-Stable
X8R
a unique,
temperature dielectric technology, these flex-robust devices
Information
to
0.47termination
μF circuitry
• Temperature
+200°C
and systems,
higher−55°C
yields
can
quickly
fltemperature
exible
system
thatRange:
is integrated
withto
KEMET’s
are RoHS Compliant, offer up to 5 mm of flex-bend capability
result in signifi
cant cost
savings.A conductive silver epoxy is
standard
termination
materials.
and feature a 150°C maximum operating temperature. Ultra124 barrier layers of
5
C temperature capability
TU
C between
1210 the base
H metal and nickel
J
G
A the same
utilized
Stable
X8R dielectric
offers
as
KEMET’s
HV-HT
series
MLCCs
are
temperature
compensating
Voltage
Case
Size Specifi
cation/ system
Capacitance
Capacitance Rated
Failure
Rate/ the
Termination
KEMET’s
standard
termination
in
order
to
establish
conventional
X8R
but
without
capacitance
loss
due
to
applied
Ceramic
Dielectric
1
2
(L" x W")
Seriesterminal
Code (pF)solderability
(VDC)
Design
and
are suited
for resonant
circuit applications
or thoseTolerance
where
pliability
while
maintaining
strength,
and
DC voltage. These devices
exhibitFinish
no change in capacitance with
Q and stability
characteristics
are+ required.
= C0G and
A =boast
N/A a Cminimal
= 100% change
Blank
Bulk
10
B = ±0.10
pF 8 = respect
H=This
High technology
2 significant
0402of capacitance
electrical
performance.
wasdigits
developed
in order
toGvoltage
in =capacitance
Matte Sn
TU = 7” Reel (full reel
C =time
±0.25 pF 4 = 16
Temperature
number
of zeros.
They
exhibit0603
noprimary
change
in capacitance
with
respect
to
to address
the
failure
mode
of
MLCCs–
fl
ex
cracks,
with
reference
to
ambient
temperature.
They
are
also
L = SnPb (5% quantity) suitable
3 = 25
(200°C)
Use 9 for 1.0 – 9.9 pF D = ±0.5 pF
0805
and
and boast
a negligible
in
capacitance
minimum)
T050footprint
= 50 pcs devices
/ 7” Reel
5 = replacements
50
= ±1%with
Usechange
8 for 0.5tensile
– .99
pFandF shear
1206
whichvoltage
are typically
the result
of excessive
for higher capacitance
and larger
T100 = 100pcs / 7” Reel
1 = 100
G = ±2%
e.g., 2.2 pF = 229
1210
stresses produced
during
board
fl
exure
and
thermal
cycling.
that
fail
to
offer
capacitance
stability.
Capacitance
change
with
T250 = 250pcs / 7” Reel
2 = 200
J = ±5%
e.g., 0.5 pF = 508
1812
technology inhibits the transfer of
respect to temperature is limited to ±15% from
-55°C
to +150°C.
T500
= 500pcs
/ 7” Reel
K =board
±10%
2220
T1K0 = 1,000 pcs / Reel
= ±20%
stress to the rigid ceramic body, therefore mitigating Mflex
cracks
In
addition
to
Commercial
Grade,
Automotive
Grade devices
1which can result in low IR or short circuit failures.
2
Additional termination finish options may be available. Contact KEMET for details.are available which meet the demanding Automotive Electronics
Surface
Mount Temperature
Multilayer Ceramic200°C,
Chip Capacitors
(SMD MLCCs)
HV-HT Series, High Voltage,
High
C0G
Dielectric,
500 – 2,000
VDC
(Industrial
Grade)
3
Reeling quantities
are dependent
size andthe
thickness
dimension. When Council's
ordering using
the “T1K0”qualifi
packaging
option,
1812 thru 2225 case size devices
Although
thisInformation
technology
doesupon
notchip
eliminate
potential
AEC-Q200
cation
requirements.
0.039
μF
•
Temperature
Range:
−55°C
to
+200°C
chip thickness
of ≥1.9that
mm (nominal)
may be shipped
multiple 7” reels or a single 13” reel. Additional reeling or packaging options may be available.
forwith
mechanical
damage
may propagate
duringonextreme
Contact KEMETand
for details.
environmental
handling
conditions,
it
does
provide
superior
C
2225
H
393
J
C
G
A
C
TU
Failure Rate/ Termination One world. One KEMET
Capacitance
Packaging/Grade
(C-Spec)3 1
complements
KEMET’s
Open• P.O.
Mode,
Floating
Electrode
1 (864) 963-6300 • Dielectric
©Ceramic
KEMET Electronics
Corporation
Box
5928(pF)
• Greenville,
SC (FE29606
www.kemet.com
C1001_C0G_200C_SMD
• 4/16/2015
(VDC)
Design
Finish2
(L" x W")
Series
Code
Tolerance
CAP), Floating Electrode with Flexible Termination (FF-CAP),
G = C0G
A = N/A
C = 100%
Blank = Bulk
H= High
2 significant digits + B = ±0.10 pF C = 500
0805
Overview
and KEMET1206
Power Temperature
Solutions (KPS)
product
lines by
TU = 7” Reel (full reel
Matte Sn
number
of zeros.
C =providing
±0.25 pF aB = 630
D = 1000
L = SnPb (5% quantity)
D = ±0.5 pF
1210 of fl(200°C)
complete portfolio
ex mitigation solutions.
F = 1500
Pb minimum) T050 = 50 pieces/7” Reel
F = ±1%
1808Temperature X7R Dielectric capacitors
KEMET’s High
are
T100 = 100 pieces/7” Reel
G
=
2000
G
=
±2%
1812
formulated and designed for extreme temperature applications.
J = ±5%
1825
Constructed2220
of a robust and proprietary base metalKelectrode
= ±10%
T1K0 = 1,000 pieces/Reel
M
=
±20%
2225
(BME) dielectric system, these devices are capable of reliable
1operation in temperatures up to 175°C. Providing an attractive
2
finish options
be available.inContact
KEMET
combination
of performance
andmay
robustness
general
high for details.
(FT-CAP),
Ultra-Stable
X8R
Dielectric,
25 ordering
– 100using
VDC
(Commercial
&1812
Automotive
Grade)
3
Reeling quantities
are dependent
upon
chip size and
thickness
dimension. When
the “T1K0”
packaging option,
thru 2225 case size
devices
temperature
applications,
High
Temperature
X7R
dielectric
Information
to
0.22
μF
•
Temperature
Range:
−55°C
with
chip thickness
of ≥1.9 mm (nominal)
may be
shippedtoon+150°C
multiple 7” reels or a single 13” reel. Additional reeling or packaging options may be available.
capacitors are well suited for high temperature bypass and
decoupling applications or frequency discriminating circuits
C
1206
X
104
J
3
H
A
C world. One
AUTO
One
KEMET
where Q and stability of capacitance characteristics are not
Specification/
Capacitance
• P.O.Capacitance
SC 29606Reated
(864) 963-6300
C1069_C0G_HV_HT_200C
• 4/16/2015 1
critical.
CeramicThey exhibit a predictable change in capacitance with
Dielectric
(L" x W")
Series
Code (pF)
Tolerance
(VDC)
Design
Finish1
(C-Spec)2
respect to time, voltage and temperature up to 175°C.
High Temperature 175ºC, X7R Dielectric, 16 – 200 VDC
(Industrial Grade)
0603
0805
1206
1210
1812
X = Flexible
Termination
2 significant
digits +
number of
zeros.
F = ±1%
G = ±2%
J = ±5%
K = ±10%
M = ±20%
3 = 25
5 = 50
1 = 100
H = Ultra-Stable
X8R
A = N/A
C = 100% Matte See "Packaging
C-Spec Ordering
Sn
Options Table"
L = SnPb (5%
below
minimum)
2
1
High Temperature 175ºC, X7R Dielectric, 16 – 200 VDC (Industrial Grade)
1,2
Capacitance Range: 2.7 nFOrdering
to 3.3 µF •Information
C
Ceramic
1210
R
Case Size1 Specification/
(L" x W")
Series1
0402
0603
0805
1206
1210
1812
G = 175°C
with standard
termination
R = 175°C
w/ Flexible
Termination
225
Capacitance
Code (pF)
First two digits
represent
significant
figures. Third
digit specifies
number of
zeros.
C1063_X8R_FT-CAP_SMD • 4/16/2015
1
C
T050
Failure Rate/
Dielectric
Tolerance
(VDC)
Design
Termination
Finish
J = ±5%
K = ±10%
M = ±20%
C = 100%
Matte Sn
K
3
4 = 16
3 = 25
5 = 50
2 = 200
R
R = X7R
A
A = N/A
Blank = Bulk
7292 = Waffle Pack/Tray
TU = 7" Reel - Unmarked
(full reel quantity)
T050 = 50 pieces/7" Reel Unmarked
T1K0 = 1,000 pieces/Reel Unmarked
Flexible termination option is only available in 0603 (1608 metric) and larger case sizes.
Reeling quantities are dependent upon chip size and thickness dimension. When ordering using the "T1K0" packaging option, 1812 case size devices with
chip thickness of ≥ 1.9 mm (nominal) may be shipped on multiple 7" reels or a single 13" reel. The term "Unmarked" pertains to laser marking of components.
All packaging options labeled as "Unmarked" will contain capacitors that have not been laser marked. Additional reeling or packaging options may be available.
1
2
39
Constructed
of a robust
and and
proprietary
base metal
in C0G dielectric exhibit no change in capacitance with respect
are environmentally
friendly
in compliance
with electrode
RoHS
(BME)
dielectric
system,
offer
industry-leading
to time and voltage and boast a negligible change in capacitance
legislation.
Combined
withthese
X8L devices
dielectric,
these
devices are
performance
relative
to capacitance
and case
KEMET
capable of reliable
operation
up to 150°C
and size.
are well
suited for with reference to ambient temperature. These devices retain
Pulse
Discharge
capacitors
average
than 30%
higher
high insulation resistance with low dissipation factor at elevated
high temperature
filtering, bypass
andgreater
decoupling
applications.
Surface
Mount Multilayer
Ceramic
Chip
Capacitors
(SMD MLCCs)
breakdown voltage than competitive precious metal electrode
temperatures up 200°C.
(PME)
devices
with similarchange
capacitance
& voltage with
ratings.
X8L exhibits
a predictable
in capacitance
respect to
KEMET’s Pulse Discharge surface mount MLCCs are
Designed
for down-hole
exploration up
andtoperforation,
these
manufactured in state of the art ISO/TS 16949:2009 certified
with reference
to ambientoiltemperature
125°C. Beyond
feature a 200°C
maximum operating temperature.
Temperaturedevices
(> 125ºC)
(cont.)
facilities and are proven to function reliably in harsh, high
The Electronics Industries Alliance (EIA) characterizes C0G
temperature and high humidity, down-hole environments.
Ceramic Capacitors
High
Surface Mount
ArcShield™ Technology, High Voltage, X7R Dielectric,
500 – 1,000 VDC (Commercial & Automotive Grade)
Overview 150°C, X8L Dielectric, 10 – 50 VDC (Commercial & Automotive Grade)
Capacitance Range: 0.47 μF to 47 μF • Temperature Range: −55°C to +150°C
KEMET ”ArcShield” high voltage surface mount capacitors in
and typically the result of excessive tensile and shear stresses
C for use in 476
M
4 producedNduring board2flexure and thermal
C
7186
Benefi
ts2220are designed
X7RCDielectric
high voltage applications
cycling. Flexible
Case
Size Specifi
cation/
Capacitance
Failure inhibits
Rate/ the
Leadframe
Packaging/Grade
susceptible
to
surface
arcing
(arc-over
discharge).
Termination
technology
transfer
of
board
stress
to the
Dielectric
• Ceramic
-55°C to(L"x
+200°C
W") operating
Series temperature
Code (pF)range Tolerance1
(VDC)rigid body of the MLCC,
Design
Finish
(C-Spec)
flex cracks
which can
The
phenomenon
surface
caused
voltage8 = 10 result in
• Lead
(Pb)-Free,
RoHS
REACH
compliant
1210 of
C =andarcing
2issignifi
cant by aKhigh
= ±10%
N =low
X8LIR or1 short
= KPScircuit
Single failures.
C = 100% 7186 = 7" Reel/Embossed
2220
digitssurfaces
+ number or between
M = ±20%one4 = 16
Chip Stack
Matte Sn
gradient
between
the Standard
two termination
• Base metal
technology
of zeros.internal electrode 3 = 25 KEMET’s “ArcShield”
2 = KPS
Double
7289 = 13"
Reel/Embossed
of
the termination
the counter
high
voltage surface mount
MLCCs
are
• High
breakdownsurfaces
voltageand
capability
up to +200°C
5 = 50
Chip Stack
structure
ceramicthan
body.competitive
It occurs most
frequently
stricter
• Higher within
UVBDthe
capability
dielectric
technologies available in automotive grade, which undergo
AUTO
= Autotesting
Grade 7"Reel
at
application voltages
thatranging
meet orfrom
exceed
300upV,toin0.15
highμF
protocol and inspection criteria. Whether under-hood
or in(Embossed Plastic)
• Capacitance
offerings
0.5 pF
AUTO
Auto Grade
humidity
environments,
in chip sizes
with ±10%
minimal
cabin, these devices are designed for mission
and7289=
safety-critical
• Available
capacitanceand
tolerances
of ±5%,
orbandwidth
±20%
13" Reel (Embossed
separation
(creepage
automotive circuits or applications requiringPlastic)
proven, reliable
• Extremely
low ESRdistance).
and ESL This phenomenon can either
surrounding
or lead
to a breakdown
ofcode)
the are only
performance in harsh environments. Automotive grade devices
• Double
High thermal
stability
1damage
chip
stacks
("2" components
in the 13th
character
position
of the ordering
Surface
Mount
Multilayer
Ceramic
Chip
Capacitors
(SMD
MLCCs)available in M (±20%) capacitance tolerance.
dielectric
material,
ultimately
resulting
inposition
a short-circuit
condition
meet the
Automotive
Electronics Council’s AEC–Q200
Single chip
stacks ("1"
in the 13th
character
of the ordering
code) are available
in Kdemanding
(±10%) or M (±20%)
tolerances.
Additional leadframe
ContactC0G
KEMETDielectric,
for details. qualifi500
failure
mode).
cation–requirements.
High2(catastrophic
Voltage,
Highfinish
Temperature
200°C,
2,000 VDC (Industrial Grade)
High Voltage C0G Dielectric, 500 – 3,000 VDC
Additional reeling
Information
to
0.15 μFoptions
• Temperature
Range:
−55°C
to
+200°Chighly
(Commercial
&or Plastic)
Automotive
Reeling tapeTechnology
(Paper(Patent
are dependent
on Grade)
capacitor
size (L"x W") and thickness dimension. See "Chip Thickness/Packaging Quantities" and
“ArcShield”
Pending)
features
KEMET’scase
Pulse Discharge,
3
3
"Tape &
Reelmetal
Packaging
Information"
sections
of this with
document.
reliable
base
dielectric
system
combined
a unique
Contact
KEMET forC-Spec
ordering
information
3
For additional
Information
regarding
"AUTO"
C-Spec
options,
see "Automotive
Information" section of this document.
internal
shield
electrode
structure
that
is
designed
to
suppress
an
3
Casepackaging
Size Specifi
cation/
Capacitance
Rated Voltage
Failure ifRate/
Termination
All Automotive
C-Specs
listed exclude
packaging Capacitance
of laser mark components.
Please contact KEMET
you require
a laser marked Packaging/Grade
option.
Ceramic event while increasing available capacitance. Developed
Dielectric
arc-over
3
Overview
(L" x W")
Series
Code (pF)
Tolerance
(VDC)1
Design
Finish2 One world.(C-Spec)
One KEMET
on the principle of a partial Faraday cage, this internal system
2824 Corporation
H= High Temp
signifi•cant
J =SC
±5%
C =963-6300
500
G = C0G
W = Pulse
C = 100%
Contact
KEMET for 1
• P.O. Box2 5928
Greenville,
29606 (864)
• www.kemet.com
• 4/16/2015
offers
unrivaled
performance
reliability
when
compared
KEMET’s
high
voltage
surface
mount
MLCCs
in C0G
dielectric
Automotive Grade is available
proven,
3040
(200°C)and
digits
+ number
K = ±10%to
B = 630
Discharge for applications
Matte Sn requiring
packaging
availability
3640maximum
of zeros and M
D = 1,000
details
externalasurface
coating technologies.
feature
125°C
are= ±20%
reliable performance in harsh environments. Whether and
under-hood
4540
F = 1,500
considered “stable.” The Electronics Industries Alliance (EIA)
G = 2,000
For
added
reliability,
KEMET's
Flexible
Termination
technology
is
characterizes C0G dielectric as a Class I material. Components
1
breakdown
voltage
(UVBD)
valuessuperior
see Tableflex
1, Pulse
Dischargeover
Series, Capacitance Range Waterfall.
anForavailable
option
that
provides
performance
2of this classification are temperature compensating and are suited
Additional termination finish options may be available. Contact KEMET for details.criteria have been established for automotive grade products in
standard termination systems. This technology was developed to
3for resonant circuit applications or those where Q and stability of
recognition of potentially harsh environmental conditions. KEMET
Additional
High Voltage (> 500
V)flexreeling
address
cracks, which are
arerequired.
the primary
mode
of MLCCs
capacitance
characteristics
C0Gfailure
exhibits
no change
in
automotive grade series capacitors meet theOne
demanding
Automotive
world. One
KEMET
capacitance
with
respect
to
time
and
voltage
and
boasts
a
negligible
Electronics
Council's
AEC–Q200
qualifi
cation
requirements.
ArcShield™ Technology,
High
Voltage,
X7R
Dielectric,
500
–
1,000
VDC
(Commercial
&
Automotive
Grade)
C1035_C0G_PULSE_SMD • 4/16/2015 1
Ordering
Information
change
in capacitance
with referenceRange:
to ambient
temperature.
to 0.33
μF
• Temperature
−55°C
to +125°C
Capacitance change is limited to ±30 ppm/ºC from -55°C to +125°C.
C
1812
V
334
K
C
R
A
C
TU
These devices
exhibit
low
ESR
at
high
frequencies
find
Failure Rate/
Termination
Capacitance and
Capacitance
Rated Voltage
Packaging/
Dielectric
Ceramic
Design
Finish1
(L"use
x W")as snubbers
Series or filters in
Code
(pF)
Tolerance
(VDC)
Grade (C-Spec)2
conventional
applications
such
as
J = ±5%
C = 500
R = X7R
A = N/A
C = 100%
See
0805supplies
V = ArcShield
significant
switching power
and lightingTwo
ballasts.
Their exceptional
"Packaging
+ number of K = ±10%
Matte Sn
W = ArcShieldhasdigits
performance1206
at high frequencies
made
high voltage MLCCs B = 630
zeros.
C-Spec
1210
M = ±20%
D = 1,000
L = SnPb (5%
with Flexible
Ordering
the preferred1808
dielectricTermination
choice of design engineers worldwide.
PB minimum)
Options
1812
Table" below
are widely used in industries related to automotive (hybrid),
telecommunications, medical, military, aerospace, semiconductors
1
Additional
terminationequipment.
finish options may be available. Contact KEMET for details.
and
test/diagnostic
High Voltage C0G Dielectric,
3,000 VDC
(Commercial
&KEMET
Automotive
Additional 500
reeling –
or packaging
options may
be available. Contact
for details. Grade)
1, 2
2
© KEMET
C Electronics
1210 Corporation
C • P.O. Box 5928
332• Greenville, SC 29606
J (864) 963-6300
C • www.kemet.com
G
Ceramic
(L" x W")
Series
0805
1206
1210
1808
1812
1825
2220
2225
Two significant
digits + number of
zeros.
Use 9 for
1.0 – 9.9 pF
Use 8 for
0.5 – .99 pF
ex. 2.2 pF = 229
ex. 0.5 pF = 508
Failure Rate/
Dielectric
Design
Tolerance1
(VDC)
B = ±0.10 pF
C = ±0.25 pF
D = ±0.5 pF
F = ±1%
G = ±2%
J = ±5%
K = ±10%
M = ±20%
C = 500
B = 630
D = 1,000
F = 1,500
G = 2,000
Z = 2,500
H = 3,000
G = C0G
A = N/A
Termination
Finish2
Packaging/Grade
(C-Spec)3
C = 100%
Matte Sn
L = SnPb (5%
Pb minimum)
Blank = Bulk Bag
(Commercial Grade)
TU = 7" Reel
(Commercial Grade)
AUTO = 7" Reel
(Automotive Grade)
AUTO 7411 = 13"
Reel/Punched Paper
(Automotive Grade)
AUTO 7210 = 13" Reel
/Embossed Plastic
(Automotive Grade)
2, 3
3
3
1
2
40
C = Standard
Capacitance
Code (pF)
A
C1034_X7R_HV_ARC_SMD
• TU
4/16/2015
C
1
switching power supplies and lighting ballasts. Their exceptional
performance at high frequencies has made high voltage MLCC’s
the preferred dielectric choice of design engineers worldwide.
Overview
are
widelyHigh
usedVoltage
in industries
related Termination
to automotive(HV
(hybrid),
KEMET’s
with Flexible
FT-CAP)
KEMET’s high voltage surface mount MLCCs in C0G dielectric
telecommunications,
medical,
military,
aerospace,
semiconductors
surface mount MLCCs in C0G dielectric address the primary
feature a 125°C maximum operating temperature and offers the
and
test/diagnostic
equipment.
failure
mode of MLCCs—fl
ex cracks, which are typically
most stable voltage and temperature performance of all ceramic
the result
of(cont.)
excessive tensile and shear stresses produced
dielectric materials. C0G (NP0) dielectric capacitors exhibit no
High Voltage (> 500
V)
Surface
Mount
Multilayer
Ceramic
ChipFeaturing
Capacitors
(SMD MLCCs)
during board
flexure
and thermal
cycling.
several
change in capacitance with respect to time and voltage and boasts
High Voltage X7R Dielectric,
500CV– (capacitance/voltage)
3,000 VDC (Commercial
& Automotive
Grade)
of the highest
values available
in
a negligible
change in capacitance with reference to ambient
Information
the
industry,
devices utilize
a pliable
and conductive
temperature. Capacitance change is limited to ±30ppm/ºC from
to 0.33
μF •these
Temperature
Range:
−55°C
to +125°C
silver epoxy between the base metal and nickel barrier layers
-55°C to +125°C.
C termination
1210 system.CThe addition154
K
C
R
A
C
TU
of the
of this epoxy layer
Case
Size of
Specifi
cation/
Capacitance
Capacitance
Rated Voltage
Failure Rate/
Termination
Packaging/Grade
inhibits
the
transfer
board
stress
to
the
rigid
ceramic
body,
Ceramic
Dielectric
(L" x W") flexSeries
Tolerance
(VDC)
Design
Finish1
(C-Spec)2
therefore
mitigating
cracks whichCode
can (pF)
result in low
IR or
Overview
0805
C
=
Standard
Two
signifi
cant
J
=
±5%
C
=
500
R
=
X7R
A
=
N/A
C
=
100%
See
"Packaging
short circuit failures. Although flexible termination technology
1206
B = 630
Matte Sn
C-Spec Ordering
does not eliminate
the potential
for mechanical
that D = 1,000
KEMET’s
High
Voltage
with Flexible
Termination
(HVM FT-CAP)
Combined with the stability of an X7RL dielectric
to
1210
of zeros. damage
= ±20%
= SnPb (5%and designed
Options Table"
1808
F = 1,500
Pb minimum)
below
may
propagate
during in
extreme
environmental
surface
mount
MLCCs
X7R dielectric
addressand
thehandling
primary
accommodate all capacitance requirements,
these flex-robust
1812
G = 2,000
conditions,
provide
ex performance
failure modeit1825
ofdoes
MLCCs–
flexsuperior
cracks, flwhich
are typicallyover
the resultZ = 2,500
devices are RoHS Compliant, offer up to 5 mm of flex-bend
standard
termination
systems.
2220
H = 3,000
of
excessive
tensile
and
shear
stressesChip
produced
during board
capability and exhibits a predictable change in capacitance with
Surface
Mount
Multilayer
Ceramic
Capacitors
(SMD MLCCs)
2225
flexure and thermal
cycling. Featuring several of the highest
respect to time and voltage. Capacitance change with reference to
1
CV
(capacitance/voltage)
valuesmay
available
in theContact
industry,
thesefor details.ambient temperature is limited to ±15% from -55°C to +125°C.
Additional
termination finish options
be available.
KEMET
1, 2
SnPb termination
finish option
is not available
on Automotive
Grade product.
devices
utilize a pliable
and conductive
silver
epoxy between
the
Termination
System
(HV
FT-CAP),
C0G
Dielectric,
2
Additional
reeling
or
packaging
options
may
be
available.
Contact
KEMET
for
details.
base metal and nickel barrier layers of the termination system.
Automotive Grade is available for applications requiring proven,
Grade)
world.under-hood
One KEMET
The addition&ofAutomotive
this epoxy layer inhibits
the transfer of board
reliable performance in harsh environments.One
Whether
Information
© 0.039
KEMET
Electronics
Corporation
• Range:
P.O.
Box 5928
• Greenville,
29606 (864) 963-6300
• www.kemet.com
C1010_X7R_HV_SMD
• 4/16/2015
Temperature
−55°C
to +125°C
stress
to μF
the •rigid
ceramic
body,
therefore
mitigating
flexSCcracks
or in-cabin,
these capacitors are designed
for mission and
safety 1
Overview
C termination
2225 technology
X
J
C
A
C
TU in
flexible
does not393
eliminate the potential
criteria haveGbeen established
for automotive
grade products
KEMET Power Solutions (KPS) High Voltage stacked capacitors
KEMET’s KPS Series devices in X7R dielectric exhibit a
Rated
Voltage
Case
Size
Specifi
cation/
Capacitance
Capacitance
Failure
Rate/
Termination
for
mechanical damage that may propagate during extreme
recognition
of potentially harsh environmentalPackaging/Grade
conditions. KEMET 3
Ceramic
Dielectric
2
utilize
a proprietary
technology
to vertically stack1 one (VDC)
predictable
change Design
in capacitance
with
respect to time and(C-Spec)
(L" x W") lead-frame
Series
Code (pF)
Finish
environmental
and handling
conditions,
it does provideTolerance
superior
automotive grade series
capacitors
meet the demanding Automotive
or two multilayer
ceramic
chip capacitors
into
a single
compact
voltage,Gand
boast aA =minimal
change
capacitance
with reference
C0G
N/A
C =qualifi
100%incation
X=standard
Two signifisystems.
cant
B = ±0.10 pF C = 500
0805 over
Blank
= Bulk Bag
flex performance
Electronics= Council's
AEC–Q200
requirements.
surface mount
The attacheddigits
lead-frame
mechanically
to ambient temperature. Capacitance
is limitedGrade)
to ±15%
Matte Sn change
Termination
+
C = ±0.25 pF B = 630
1206package.
(Commercial
D = 1000
zeros. board,
D = ±0.5
pF
= SnPb (5%
TU = 7” Reel
isolates the1210
capacitor(s) from the number
printedofcircuit
thereby
from -55°C to +125°C. TheseLdevices
are capable
of Pb-Free
F = ±1%
1808 offers low leakage current, exhibits low
The HV FT-CAP
ESR at F = 1500
offering advanced
reflow profiles and provide lower ESR, ESLAUTO
and higher
ripple
G = 2000
G = ±2%
1812 mechanical and thermal stress performance.
= 7” Reel
high frequencies
and
fi
nds
conventional
use
as
snubbers
or
fi
lters
Z = 2500
J = ±5%
1825
(Automotivesolutions.
Grade)
Isolation also
addresses concerns for audible microphonic
current capability when compared to other dielectric
in applications
2220such as switching power supplies andKlighting
AUTO 7411 = 13” Reel/
noise that may
occur when a bias voltage is applied.M =A= ±10%
two-chip H = 3000
±20%
2225
Punched Paper
ballasts. Their
exceptional performance at high frequencies
has
stack offers up to double the capacitance in the same or smaller
Conventional uses include both snubbers and
filters inGrade)
applications
(Automotive
made them a preferred choice of design engineers worldwide.
AUTO
7210 = 13”
Reel/
design footprint when compared to traditional surface mount
such as switching power supplies and lighting
ballasts.
Their
Embossed Plastic
MLCC devices. Providing up to 10 mm of board flex capability,
exceptional performance at high frequencies(Automotive
has made
high
Grade)
are widely used in industries related to automotive(hybrid),
KPS Series High Voltage capacitors are environmentally friendly
1
Additional capacitance tolerance
be available.
telecommunications,
medical,offerings
military,may
aerospace,
semiconductors
2and in compliance with RoHS legislation.
Additional
terminationequipment.
finish options may be available. Contact KEMET for details.design engineers worldwide. In addition to their use in power
and
test/diagnostic
2, 3
SnPbTermination
is not available
automotive grade
product.
System
(HVonFT-CAP)
X7R
Dielectric,
3
& Automotive Grade)
3
Reeling tape options (Paper or Plastic) are dependent on capacitor case size (L”x aerospace,
W”) and thickness
dimension. Seeand
“Chiptest/diagnostic
Thickness/Packaging
Quantities” and
semiconductors,
equipment.
Ceramic Capacitors
Surface Mount
X7R Dielectric, 500 – 3,000 VDC (Commercial & Automotive Grade)
Capacitance Range: 130 pF to“Tape
0.33
μF Packaging
• Temperature
Range:
−55°C
to +125°C
& Reel
Information”
sections of
this document.
3
C
1210
X
154
K
C
(L" x W")
Series
Code (pF)
Tolerance
(VDC)
R
A
COne world. OneTUKEMET
Benefi
tsCase Size Corporation
Termination
Specification/
Capacitance
Rated
Packaging/Grade
• P.O. Capacitance
SC 29606 (864)
963-6300
C1070_C0G_HV_FT-CAP
• 4/16/2015 1
Ceramic
•
•
•
•
•
•
-55°C to +125°C
range J = ±5%
0805 operating
X = Flexibletemperature
Two significant
+ number K = ±10%
1206robustTermination
Reliable and
terminationdigits
system
of zeros.
M = ±20%
EIA 2220 1210
case size
1808
DC voltage1812
ratings of 500 V and 630 V
Capacitance
1825offerings ranging from 0.047 µF up to 1.0 µF
2220
Available capacitance
2225
C = 500
B = 630
D = 1,000
F = 1,500
G = 2,000
Z = 2,500
H = 3,000
Dielectric
R = X7R
Design
Finish1
(C-Spec)2
A = N/A
C = 100%
Matte Sn
L = SnPb (5%
Pb minimum)
See "Packaging
C-Spec Ordering
Options Table"
below
2
1
1, 2
KPS Series, High Voltage, X7R Dielectric, 500 – 630 VDC (Commercial Grade)
Ordering
C
Ceramic
2220
C
(L"x W")
Series
2220
C=
Standard
105
M
Capacitance
Code (pF)
Capacitance
Tolerance1
number of zeros.
K = ±10%
M = ±20%
C
R
Rated Voltage
Dielectric
(VDC)
C = 500
B = 630
R = X7R
C1025_X7R_HV_FT-CAP_SMD • 4/16/2015
1
2
C
7186
Failure Rate/
Design
Leadframe
Finish2
Packaging/Grade
(C-Spec)3
1 = KPS Single
Chip Stack
2 = KPS Double
Chip Stack
C = 100%
Matte Sn
7186 = 7" Reel/
Embossed Plastic
7289 = 13" Reel/
Embossed Plastic
2
3
1
41
Constructed
of a robust
and proprietary
base metal
electrode
in C0G dielectric exhibit no change in capacitance with respect
KEMET’s HV-HT
series MLCCs
are temperature
compensating
(BME)
dielectric
system,
these
devices
offer
industry-leading
to time and voltage and boast a negligible change in capacitance
and are suited
resonant circuit
applications
or those where
Surface
MountforMultilayer
Ceramic
Chip Capacitors
(SMD MLCCs)
performance
to capacitance
and caseare
size.
KEMET
with reference to ambient temperature. These devices retain
Q and stabilityrelative
of capacitance
characteristics
required.
Pulse
Discharge
capacitors
average
greater
than
30%
higher
high insulation resistance with low dissipation factor at elevated
They exhibit no change in capacitance with respect to time
breakdown
voltage
than
competitive
precious
metal
electrode
temperatures up 200°C.
and voltage and boast a negligible change in capacitance with
(PME) devices with similar capacitance & voltage ratings.
KEMET’s Pulse Discharge surface mount MLCCs are
Designed for down-hole oil exploration and perforation, these
manufactured in state of the art ISO/TS 16949:2009 certified
devices
feature
a
200°C
maximum
operating
temperature.
facilities and are proven to function reliably in harsh, high
Overview
High Voltage (> 500 V) (cont.)
The Electronics Industries Alliance (EIA) characterizes C0G
temperature and high humidity, down-hole environments.
KPS HV (KEMET
Power Solutions, High
Voltage),
Large
offer
up to(Industrial
10 mm of boardGrade)
flex capability and
HV-HT Series, High Voltage,
High Temperature
200°C,
C0G
Dielectric,Series
500 –devices
2,000
VDC
Case
(≥
1515),
SM
Series
capacitors
in
C0G
dielectric
are
exhibit
lower
ESR,
ESL
and
higher
current
discharge capability
designed to meet robust performance standards required in
when compared to other dielectric solutions.
Benefi
ts industrial applications. Utilizing lead-frame
higher
C reliability
2225
H
393
J
C
G
A
C
TU
technology,
SM
Series
devices
isolate
the
multilayer
ceramic
Combined
with
the
stability
of
an
C0G
dielectric,
KEMET’s
High
Case
Size
Specifi
cation/
Capacitance
Capacitance
Rated
Voltage
Failure
Rate/
Termination
• Ceramic
-55°C to +200°C operating temperature range
chip
component
the
printed
circuit
board
Voltage Dielectric
SM Series devices
no2 change
in capacitance with
(L" x W")from
Series
Code
(pF) providing
Tolerance1
(VDC)
Design exhibit
Finish
•Surface
Lead
(Pb)-Free,
RoHS
and
REACH
compliant
Mount
Multilayer
Ceramic
Chipperformance.
Capacitors (SMD MLCCs)
advanced
mechanical
stress
respect G
to=time
change in
C0GandAvoltage
= N/A and
C = boasts
100% a negligible
Blank = Bulk
H=and
Highthermal
2 signifi
cant digits + B = ±0.10 pF C = 500
0805
• Base metal
technology
TU = 7” Reel
(full reel
Matte
Sn temperature.
Temperature
number
of zeros. concerns
C = ±0.25
pF B = 630
1206
Isolation
of
the
chip
component
also
addresses
for
capacitance
with
reference
to
ambient
Capacitance
• High breakdown
voltage
D = 1000
L = SnPb (5% quantity)
(200°C)capability up to +200°CD = ±0.5 pF
1210
audible,
microphonic
noise
that
may
occur
when
a
bias
voltage
change
is
limited
to
±30
ppm/ºC
from
-55°C
to
+125°C.
T050
=
50
pieces/7”
Reel
F = 1500
Pb minimum)
F = technologies
±1%
1808 capability than competitive dielectric
• Higher UVBD
is
applied.
Although
this
technology
does
not
eliminate
the
G = 2000
G = ±2%
1812
• Capacitance
offerings ranging from 0.5 pF up to J0.15
μF
= ±5%
potential
for1825
mechanical damage
thatof may
during
KEMET's Industrial Grade products offer additional
T500 = 500screening
pieces/7” Reel
• Available
capacitance
tolerances
±5%,propagate
±10% Kor= ±20%
±10%
2220
T1K0
= 1,000
extreme
environmental
and
handling
conditions,
it
does
options
for
higher
reliability
applications.
Both
Group
A pieces/Reel
and Group
M = ±20%
• Extremely2225
low ESR and ESL
demonstrate
superior
performance
over
non-isolating
systems.
B
testing/inspection
options
per
MIL–PRF–49467
are
available
for
Overview
1• High thermal stability
the
SM
Series.
2Available in both formed "L" and "J" lead configurations, SM
3
HVquantities
(KEMETarePower
Solutions,
High
Large
Case When flordering
ex capability
exhibit
loweroption,
ESR,1812
ESLthru
and2225
higher
Reeling
dependent
upon chip
sizeVoltage),
and thickness
dimension.
using theand
“T1K0”
packaging
casecurrent
size devices
Pulse Discharge, HighKPS
Voltage,
High
Temperature
200°C,
C0G
Dielectric,
500
– 2,000
VDC
(Industrial
Grade)
(≥with
1515),
Series
capacitors
in X7R
to ordischarge
when
compared
to other
dielectric
solutions.
chip SM
thickness
of ≥1.9
mm (nominal)
maydielectric
be shippedare
on designed
multiple 7” reels
a single 13” capability
reel. Additional
reeling
or packaging
options
may be available.
Ordering
Information
Capacitance Range: 0.5 pF toContact
0.15 KEMET
μF • Temperature
Range: −55°C to +200°C
for details. standards
meet
robust
performance
required
in
higher
reliability
Benefits
Combined with the stability of an X7R dielectric,
KEMET’s
industrial applications. Utilizing lead-frame technology, SM SeOne world.
One High
KEMET
Contact KEMET for ordering information
Voltage• SM
Series devices exhibit
a predictable change
in
devices
isolateCorporation
the multilayer
chip
component
from(864) 963-6300
© KEMET
Electronics
•temperature
P.O. ceramic
Box 5928 range
• Greenville,
SC 29606
www.kemet.com
C1069_C0G_HV_HT_200C
• 4/16/2015
1
•ries
-55°C
to
+125°C
operating
Failure Rate/
Capacitance
Termination
Packaging/Grade
capacitance
with respect to time and voltage
and boast a minimal
Ceramic
Dielectric
printed
circuit
board
providing advanced mechanical and
•the
Large
Case
Sizes
(≥
1515)
1
2
3
(L" x W")
Series
Code (pF)
Tolerance
(VDC)
Design
Finish
(C-Spec)
change in capacitance with reference to ambient temperature.
thermal
stress
Isolation
of the chip component
• Formed
“L”2824
orperformance.
“J” leadframe
configurations.
H= High Temp
2 significant
J = ±5%
C = 500
G = C0G
W = Pulse
C = 100%
Contact KEMET for
Capacitance changeDischarge
is limited to ±15%
to +125°C.
also
addresses
concerns
forper
audible,
microphonic
noise
that
• Group
A and
screening
MIL–PRF–49467
3040B
Mattefrom
Sn -55°C
packaging
availability
(200°C)
digits
+ number available
K = ±10%
B = 630
3640robust
of zeros
= ±20%
and details
may
occur and
when
a biasleadframe
voltage istermination
applied.
Although
tech- D = 1,000
• Reliable
systemM this
F = 1,500
KEMET's Industrial grade products offer additional screening
nology
does4540
not
eliminate
the1 KV,
potential
mechanical
• DC voltage
ratings
of 500 V,
2 KV, 3forKV,
4 KV, 5 KV,damage G = 2,000
options for higher reliability applications. Both Group A and Group
that
may
propagate
during
extreme
environmental
and
handling
7.5
KV,
and
10
KV
1
For breakdown voltage (UVBD) values see Table 1, Pulse Discharge Series, Capacitance Range Waterfall.
B testing/inspection options per MIL–PRF–49467 are available for
conditions,
it
does
demonstrate
superior
performance
over
2• Capacitance offerings ranging from 10 pF up to 0.39 μF
the SM Series.
3non-isolating systems. Available in both formed "L" and "J" lead
Additional
reelingC0G
or packaging
options may be
available.
Contact KEMET
details.
KPS HV, Large Case, SM
Series,
Dielectric,
500
– 10,000
VDCfor(Industrial
Grade)
configurations, SM Series devices offer up to 10 mm of board
Ceramic Capacitors
KPS HV, Large Case, SM Series, C0G Dielectric,
500 – 10,000 VDC (Industrial Grade)
Surface Mount
KPS HV, Large Case, SM Series, X7R Dielectric,
500 – 10,000 VDC (Industrial Grade)
to 0.39 μF •Information
SM20
Benefits
Style/Size
C1035_C0G_PULSE_SMD • 4/16/2015 1
N
472
J
501
B
M
Dielectric
Capacitance
Code (pF)
Capacitance
Tolerance
Rated Voltage
(VDC)
Lead
Configuration1
Testing/
Inspection Option2
•
•
•
•
•
•
-55°C
operating Ntemperature
range
A = Formed "L" Blank = None
= C0G
2 signifi
cant digits J = ±5%
501 = 500
SM20to +125°CSM30
B = Formed "J" M = Group A per MIL–PRF–49467
102 = 1,000
SM31
SM21Case Sizes
Large
(≥ 1515)
M = ±20%
202 = 2,000
SM33
SM22
Formed
“L”
or
“J”
leadframe
confi
gurations
302 = 3,000
SM34
SM23
Group
per MIL–PRF–49467 available
402 = 4,000
SM35
SM24A and B screening
502 = 5,000
SM36leadframe termination system
SM25 and robust
Reliable
752 = 7,500
SM26
DC voltage ratings of 500 V, 1 KV, 2 KV, 3 KV, 4 KV, 5 KV,
103 = 10,000
7.5 KV, and 10 KV
1
lead configuration is formed "J". If the appropriate character is excluded from the ordering code, the assumed lead configuration will be formed "J".
•2 Standard
Capacitance
offerings ranging from 150 pF up to 5.6 μF
Group B testing/inspection option per MIL–PRF–49467 is available upon request. Please contact KEMET for ordering details.
KPS HV, Large Case, SM Series, X7R Dielectric, 500 – 10,000 VDC (Industrial Grade)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1032_C0G_KPS_HIVOLT_SMD • 4/16/2015
SM20
SM21
SM22
SM23
SM24
SM25
SM26
1
2
SM20
B
153
K
501
B
M
Style/Size
Dielectric
Capacitance
Code (pF)
Capacitance
Tolerance
Rated Voltage
(VDC)
Lead
Configuration1
Testing/
Inspection Option2
501 = 500
102 = 1,000
202 = 2,000
302 = 3,000
402 = 4,000
502 = 5,000
752 = 7,500
103 = 10,000
A = Formed "L"
B = Formed "J"
Blank = None
M = Group A per MIL–PRF–49467
SM30
SM31
SM33
SM34
SM35
SM36
B = X7R
2 significant
digits + number
of zeros
K = ±10%
M = ±20%
1
Standard lead configuration is formed "J". If the appropriate character is excluded from the ordering code, the assumed lead configuration will be formed "J".
Group B testing/inspection option per MIL–PRF–49467 is available upon request. Please contact KEMET for ordering details.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1033_X7R_KPS_HIVOLT_SMD • 4/16/2015
42
1
Surface Mount Ceramic Capacitors
GR900 High Reliability Series, BP and BX Dielectric,
Ceramic Capacitors
Surface Mount 16 – 200 VDC
Aerospace & Defense
Overview
MIL–PRF–123, BP & BX Dielectric, 6.3 – 200 VDC
Information
1 μF • Temperature
CC
Ceramic
Ceramic
0805
0805
Style/
Style/
Size
Size
0805
0805
1206
1206
1210
1210
1808
1808
1812
1812
1825
1825
2225
2225
ZZ
Specifi
Specification/
cation/
Series
Series
ZZ == MILMILPRF-123
PRF-123
101
101
55
K
K
Capacitance
Capacitance
Code
Code (pF)
(pF)
Two
Two signifi
significant
cant digits
digits ++
number
number of
of zeros
zeros
Use
Use 99 for
for 1.0
1.0 -- 9.9
9.9 pF
pF
ex.
ex. 0.5
0.5 pF
pF == 508
508
ex.
2.2
pF
=
229
ex. 2.2 pF = 229
Use
Use 88 for
for 0.5
0.5 -- 0.99
0.99 pF
pF
Capacitance
Capacitance Rated
Rated Voltage
Voltage
Tolerance
(VDC)
Tolerance
(VDC)
C
C == ±0.25
±0.25 pF
pF 55 == 50
50
D
11 == 100
D == ±0.5
±0.5 pF
pF
100
FF == ±1%
±1%
JJ == ±5%
±5%
KK == ±10%
±10%
G
G
Dielectric
Dielectric
G
G == BP
BP (Ultra(Ultrastable)
stable)
X
X == BX
BX (Stable)
(Stable)
A
A
Failure
Failure Rate/
Rate/
Design
Design
A
A == N/A
N/A
A
A
LL
Termination
Termination
Finish
Finish
H
H == Nickel
Nickel
guarded,
guarded,
(solder
(solder
coated)
coated)
LL == 70/30
70/30
SnPb
plated
SnPb plated
Failure Rate
Rate
Failure
A == N/A
N/A
A
MIL–PRF–123
MIL–PRF–123
M123
M123
Series
Series
M123
M123 ==
MIL-PRF
MIL-PRF
A
Specifi
Specification/
cation/
Series
Series
AA == Indicates
Indicates the
the
latest
latest characteristics
characteristics
of
of the
the part
part in
in the
the
specifi
specification
cation sheet.
sheet.
10
Style/Size
Style/Size
10
10 == 0805
0805
11
11 == 1210
1210
12
12 == 1808
1808
13
13 == 2225
2225
21
21 == 1206
1206
22
=
1812
22 = 1812
23
23 == 1825
1825
B
BX
Rated
Rated Voltage
Voltage
Dielectric
Dielectric
(VDC)
(VDC)
BP
BP == G
G (Ultra-stable)
(Ultra-stable) BB == 50
50
BX
C=
BX == XX (Stable)
(Stable)
C= 100
100
472
K
Capacitance
Capacitance
Code
Code (pF)
(pF)
Two
Two signifi
significant
cant digits
digits ++
number
number of
of zeros
zeros
Use
Use 99 for
for 1.0
1.0 -- 9.9
9.9 pF
pF
ex.
ex. 0.5
0.5 pF
pF == 508
508
ex.
ex. 2.2
2.2 pF
pF == 229
229
Use
Use 88 for
for 0.5
0.5 -- 0.99
0.99 pF
pF
Capacitance
Capacitance
Tolerance
Tolerance
C
C == ±0.25
±0.25 pF
pF
D
D == ±0.5
±0.5 pF
pF
FF == ±1%
±1%
JJ == ±5%
±5%
K
K == ±10%
±10%
Z
Termination Finish
Finish
Termination
70/30 SnPb
SnPb
ZZ == 70/30
plated
plated
S == Nickel
Nickel
S
guarded, (solder
(solder
guarded,
coated)
coated)
GR900 High Reliability Series, BP & BX Dielectric, 16 – 200 VDC
Information
C
0805
A
103
K
5
X
©© KEMET
KEMET Electronics
Specification/
Capacitance
Dielectric
Ceramic Style/Size
Series
Code (pF)
Tolerance
(VDC)
0504
0805
1005
1206
1210
1805
1808
1812
1825
2225
A = GR900
Q = Q-Spec
Two significant digits +
number of zeros
Use 9 for 1.0 - 9.9 pF
ex. 0.5 pF = 508
ex. 2.2 pF = 229
Use 8 for 0.5 - 0.99 pF
C = ±0.25 pF
D = ±0.5 pF
F = ±1%
G = ±2%
J = ±5%
K = ±10%
M = ±20%
1 = 100
2 = 200
3 =25
4 = 16
5 = 50
G = BP (Ultrastable)
X = BX
(Stable)
A
C
A
• 4/16/2015
1
Failure Rate
Failure Rate/
Design
Termination
Finish
A = N/A
C = 100% Tin
plated
H = 60/40
SnPb coated
L = 70/30
SnPb plated
G = Gold
plated
A = N/A
• 4/16/2015
1
43
Ceramic Capacitors
Surface Mount
DSCC Approved 03028 (BR/BX Dielectrics)
Aerospace & Defense (cont.)
MIL-PRF-55681, BP & BX Dielectric, 50 – 100 VDC
0.47 μF • Temperature
Overview
CC
0805
0805
PP
Specification/
Ceramic Style/Size
Style/Size Specification/
Ceramic
Series
Series
Surface
KK
0805
MILTwo signifi
significant
cant digits
digits
0805
PP == MILTwo
1206
PRF-55681
number of
of zeros
zeros
1206
PRF-55681
++ number
1210
(CDR01 ––
Use 99 for
for 1.0
1.0 -- 9.9
9.9 pF
pF
1210
(CDR01
Use
1805
CDR06)
ex. 0.5
0.5 pF
pF == 508
508
1805
CDR06)
ex.
1808
MILex. 2.2
2.2 pF
pF == 229
229
1808
NN == MILex.
1812
PRF-55681 Use
Use 88 for
for 0.5
0.5 -- 0.99
0.99
1812
PRF-55681
1825
(CDR31 ––
pF
1825
(CDR31
pF
Mount
Ceramic
Capacitors
2225
CDR35)
2225
CDR35)
11
G
G
M
M
LL
Failure Rate/
Rate/
Failure
Design
Design
Capacitance Rated
Rated Voltage
Voltage
Capacitance
Dielectric
Dielectric
Tolerance
(VDC)
Tolerance
(VDC)
B
=
±0.1
pF
5
=
50
G
BP (C0G,
(C0G,
B = ±0.1 pF
5 = 50
G == BP
±0.25 pF
pF 11 == 100
100
NP0)
CC == ±0.25
NP0)
±0.5 pF
pF
BX (X7R)
(X7R)
DD == ±0.5
XX == BX
±1%
FF == ±1%
±5%
JJ == ±5%
±10%
KK == ±10%
M == ±20%
±20%
M
M == 1%/k
1%/k hours
hours
M
0.1%/k hours
hours
PP == 0.1%/k
0.01%/k hours
hours
RR == 0.01%/k
0.001%/k hours
hours
SS == 0.001%/k
AA
Termination
Termination
Finish
Finish
Failure
Failure
Rate
Rate
100% Tin
Tin
CC == 100%
plated
plated
60/40
HH == 60/40
SnPb plated
plated
SnPb
70/30
LL == 70/30
SnPb plated
plated
SnPb
N/A
AA == N/A
DLA Approved 03029 (BR/BX Dielectrics)
MIL–PRF–55681
MIL-PRF-55681
CDR
CDR
01
01
BB
Temperature
Style/Size Temperature
Style/Size
(°C ))
(°C
Overview
Ceramic 01
01 == 0805
0805 BB == -55
-55 to
to
CC == Ceramic
Dielectric, 02
02 == 1805
1805 +125
+125
DD == Dielectric,
Fixed Chip
Chip
03 == 1808
1808
Fixed
03
04 == 1812
1812
RR ==
04
Established
05 == 1825
1825
Established
05
Reliability
06 == 2225
2225
Reliability
06
31 == 0805
0805
31
32 == 1206
1206
32
33 == 1210
1210
33
34 == 1812
1812
34
35 == 1825
1825
35
Series
Series
101
101
Capacitance
Capacitance
Code (pF)
(pF)
Code
PP
101
101
BB
KK
Capacitance Rated
Rated Voltage
Voltage Capacitance
Capacitance
Capacitance
Code (pF)
(pF)
(VDC)
Tolerance
Code
(VDC)
Tolerance
(BP, Two
Two signifi
significant
cant AA == 50
50
±0.1 pF
pF
PP == GG (BP,
BB == ±0.1
C0G)
digits ++ number
number BB == 100
100
±0.25 pF
pF
C0G)
digits
CC == ±0.25
BX
of zeros
zeros
±0.5 pF
pF
XX == BX
of
DD == ±0.5
(X7R)
Use 99 for
for 1.0
1.0 -±1%
(X7R)
Use
FF == ±1%
9.9 pF
pF
±5%
9.9
JJ == ±5%
ex. 0.5
0.5 pF
pF == 508
508
±10%
ex.
KK == ±10%
ex. 2.2
2.2 pF
pF == 229
229
M == ±20%
±20%
ex.
M
Use 88 for
for 0.5
0.5 -Use
0.99 pF
pF
0.99
ZZ
M
M
AA
Failure Rate/
Rate/ Failure
Failure
Failure
Design
Rate
Design
Rate
M == 1%/k
1%/k
N/A
M
AA == N/A
hours
hours
0.1%/k
PP == 0.1%/k
hours
hours
0.01%/k
RR == 0.01%/k
hours
hours
0.001%/k
SS == 0.001%/k
hours
hours
Termination Finish
Finish
Termination
Dielectric
Dielectric
Solder coated
coated
SS == Solder
Base metallization,
metallization,
UU == Base
(solder coated)
coated)
(solder
W == Base
Base metaliation,
metaliation,
W
(Tin/Lead alloy)
alloy)
(Tin/Lead
Base metalization,
metalization,
YY == Base
(100% Tin)
Tin)
(100%
Base metalization,
metalization,
ZZ == Base
metal-tinned (Tin/Lead
(Tin/Lead
metal-tinned
alloy)
alloy)
One world.
world. One
One KEMET
KEMET
One
KEMET Electronics
Corporation •• P.O.
P.O. Box
Box 5928
5928 •• Greenville,
Greenville, SC
SC 29606
29606 (864)
(864) 963-6300
963-6300 •• www.kemet.com
www.kemet.com
©© KEMET
4/16/2015
•• 4/16/2015
DLA Drawing 03028 BR & BX Dielectric, 6.3 – 200 VDC, 0603 Case Size (1608 Metric)
11
03028
Series
03028 =
DSCC
Drawing
Number
(0603 case
size)
BX
104
Y
J
Z
Dielectric
Capacitance
Code (pF)
Rated Voltage
(VDC)
Capacitance
Tolerance
BR
BX
number of zeros
Use 9 for 1.0 - 9.9 pF
ex. 0.5 pF = 508
ex. 2.2 pF = 229
Use 8 for 0.5 - 0.99 pF
W = 6.3
X = 10
Y = 16
Z = 25
A = 50
B = 100
C = 200
J = ±5%
K = ±10%
M = ±20%
C
7189
Termination Finish
Screening Option
Packaging/Grade
(C-Spec)2
U = SnPb (4% Pb
minimum)
Z = SnPb (4% Pb
minimum)
Blank = No group C
testing
C = Full Group C
L = 2,000 hour life
test only
M = 1,000 hour life
test only
H = Low voltage
humidity only
1
Blank = Bulk bag
7246 = Anti-static
bulk bag
7292 = Waffle pack
7189 = 7” Reel
marked
DLA Drawing 03029 BR & BX Dielectric, 6.3 – 100 VDC, 0402 Case Size (1005 Metric)
to 2,200 pFInformation
© KEMET
• P.O. Box222
5928 • Greenville, SC Z29606 (864) 963-6300
• www.kemet.com
03029Electronics Corporation
BX
J
Z
Series
03029 =
DSCC
Drawing
Number
(0402 case
size)
44
Dielectric
BR
BX
Capacitance
Code (pF)
number of zeros
Use 9 for 1.0 - 9.9 pF
ex. 0.5 pF = 508
ex. 2.2 pF = 229
Use 8 for 0.5 - 0.99 pF
Rated Voltage
(VDC)
W = 6.3
X = 10
Y = 16
Z = 25
A = 50
B = 100
Capacitance
Tolerance
J = ±5%
K = ±10%
M = ±20%
C
• 4/16/2015
7189
Termination Finish
Screening Option
U = SnPb (4% Pb
minimum)
Z = SnPb (4% Pb
minimum)
Blank = No group C
testing
C = Full Group C
L = 2,000 hour life
test only
M = 1,000 hour life
test only
H = Low voltage
humidity only
1
Packaging/Grade
(C-Spec)2
Blank = Bulk bag
7246 = Anti-static
bulk bag
7292 = Waffle pack
7189 = 7” Reel
marked
1
Ceramic Capacitors
Surface Mount
Aerospace & Defense
DSCC(cont.)
Approved 91019
DLA Drawing 05006 BP, BR & BX Dielectric, 10 – 200 VDC, 0805 Case Size (2012 Metric)
Capacitance Range: 0.5 pF Ordering
05006
Overview
Series
05006 =
DSCC
Drawing
Number
Surface
Mount
(0805 case
size)
BP
681
Z
F
Z
Dielectric
Capacitance
Code (pF)
Rated Voltage
(VDC)
Capacitance
Tolerance
Termination Finish
BR
BX
BP
Multilayer
number of zeros
Use 9 for 1.0 - 9.9 pF
ex. 0.5 pF = 508
Ceramic
ex. 2.2 Capacitors
pF = 229
Use 8 for 0.5 - 0.99 pF
1
X = 10
C = ±0.25 pF U = SnPb (4% Pb
Y = 16
D = ±0.5 pF
minimum)
Z = 25
F = ±1%
Z = SnPb (4% Pb
A = 50
G = ±2%
minimum)
(SMD
High Power Applications
B = 100MLCCs)J =for
±5%
C = 200
CBR Series, C0G Dielectric, Ultra High Q, Low ESR,
6.3 – 500 VDC (RF & Microwave)
C
7189
Screening Option
Packaging/Grade
(C-Spec)2
Blank = No group C
testing
C = Full group C
L = 2,000 hour life
test only
M = 1,000 hour life
test only
H = Low voltage
humidity only
Blank = Bulk bag
7246 = Anti-static
bulk bag
7292 = Waffle pack
7189 = 7” Reel
marked
DLA Drawing 05007 BP,Overview
BR & BX Dielectric, 10 – 200 VDC, 1206 Case Size (3216 Metric)
4,700 pF •Information
world.toOne
KEMET’s CBR Series surface mount multilayer ceramic
ambient temperature. Capacitance changeOne
is limited
±30KEMET
ppm/
05007Electronics
BP
F from• -55°C
© KEMET
• P.O. Box222
5928 • Greenville,
www.kemet.com
• 4/16/2015
1
capacitors
(MLCCs)Corporation
in C0G dielectric
feature
a robustSC
and
ºC
to Z+125°C.
Z29606 (864) 963-6300
C
7189
Capacitance
Rated Voltage Capacitance
Packaging/Grade
exceptionally
stable
copper
electrode
dielectric
system
1
Termination Finish
Series
Dielectric
Screening Option
Code (pF)(High Q). These
(VDC)
Tolerance
(C-Spec)2
that offers excellent low loss performance
CBR Series devices are suitable for many circuit applications
05007
=
BR
2
signifi
cant
digits
+
X
=
10
C
=
±0.25
pF
U
=
SnPb
(4%
Pb
Blank
=
No
group
C
Blank
Bulk bag
devices provide extremely low ESR and high self-resonance
including RF power amplifiers, mixers, oscillators, low=noise
DSCC
BX
number of zeros
Y = 16
D = ±0.5 pF
minimum)
testing
7246 = Anti-static
characteristics,
and BP
are well-suited
for1.0
resonant
amplifiers,Zfi=lter
networks,
circuits,
Drawing
Use 9 for
- 9.9 pF circuit
Z = 25
F = ±1%
SnPb
(4% Pb antenna
C = Fulltuning,
group Ctimingbulk
bag delay
Number or those where Q and
ex. 0.5
pF = 508
A = 50
G = ±2%
applications
stability
of capacitance
lines, and minimum)
MRI imaging coils. L = 2,000 hour life 7292 = Waffle pack
(1206 case
ex.Series
2.2 pF =capacitors
229
Bexhibit
= 100 no J = ±5%
test only
7189 = 7” Reel
characteristics
are required. CBR
size)
Use 8 for 0.5 - 0.99 pF
C = 200
M = 1,000 hour life
marked
change in capacitance with respect to time and voltage, and
test only
boast a negligible change in capacitance with reference to
H = Low voltage
humidity only
DLA Drawing 91019, BR
Dielectric,
25 – 50 VDC, 2220 Case Size (5650 Metric)
Benefi
ts
RF & Microwave
01 • P.O. Box 5928 • Greenville, SC
- 29606 (864) 963-6300 • www.kemet.com
7189
•© KEMET
Ultra91019
high
Q
1
2
• BaseSeries
metal electrode
(BME)
dielectric system
Dash
Number
Termination Finish
Packaging/Grade (C-Spec)
• Pb-Free and RoHS Compliant
91019 = DSCC
01
Blank = "U" termination finish / SnPb
Blank = Bulk bag
• 0201,
0402,
0603, and 0805
(inches)
Drawing
Number
02 case sizes
(4% Pb
minimum)
7246 = Anti-static bulk bag
(2220
case size)
7292 = Waffle pack
• DC
voltage
ratings of 6.3 03
V, 10 V, 25YV,= 100%
50 V,Sn
100 V,
04
Z = SnPb (4% Pb minimum)
7189 = 7” Reel marked
250 V and 500 V
05
• Capacitance offerings ranging from 0.1 pF up to 100 pF
• Available capacitance tolerances of ±0.05 pF, ±0.1 pF,
±0.25 pF, ±0.5 pF, ±1%, ±2%, ±5%, and ±10%
• 4/16/2015
1
CBR Series, C0G Dielectric, Ultra High Q, Low ESR, 6.3 – 500 VDC
to 100 pF •Information
CBR
02
C
330
F
CBR
02 = 0201
04 = 0402
06 = 0603
08 = 0805
C=
Standard
number of zeros
Use 9 for 1.0 – 9.9 pF
Use 8 for 0.1 – .99 pF
e.g., 2.2 pF = 229
e.g., 0.5 pF = 508
A = ±0.05 pF
B = ±0.1 pF
C = ±0.25 pF
D = ±0.5 pF
F = ±1%
G = ±2%
J = ±5%
9
G
A
G = C0G
A = N/A
COne world. One KEMET
• 4/16/2015
1
Packaging/Grade
Capacitance
Termination
Dielectric
Termination Finish
Series
(C-Spec)1
(L"x W")
Series
Code (pF)
Tolerance
(VDC)
Style
9 = 6.3
8 = 10
3 = 25
5 = 50
1 = 100
2 = 200
A = 250
C = 500
C = 100% Matte Sn
Blank = 7" Reel
Unmarked
1
When ordering CBR series devices, a "suffix" or "C-Spec" is not required to indicate a 7" reel packaging option. CBR devices are only available and shipped on 7"
reels (paper tape). Bulk bag and cassette packaging options are not available. Please contact KEMET if you have a specific, non-standard packaging requirement.
C1030_C0G_CBR • 4/16/2015
451
Commercial
• RoHS Compliant
ceramic
capacitors
X7R
feature
• DC voltage
ratingsin of
50 dielectric
V, 100 V and
200aV125°C maximum
operating
temperature.
The
Electronics
Industries
• Capacitance offerings ranging from 1.0 pF up toAlliance
0.053 μF
(EIA)
characterizes
X7R tolerances
dielectric asofa±0.25
ClasspF,
II “temperature
• Available
capacitance
±0.5 pF, ±1%,
stable”
of this classification are fixed,
±2%,material.
±5%, andComponents
10%
Axial
Through-Hole
Multilayer
Ceramic
Capacitors
ceramic
dielectric
capacitors
suited
for bypass
and decoupling
• High temperature solder lead attach
applications
or
for
frequency
discriminating
circuits
where Q
• Extremely low ESR and ESL
• High thermal stability
Grade
• No capacitance change with respect to applied rated DC voltage
• Non-polar device, minimizing installation concerns
exhibits
predictable
in capacitance
with for
respect
to time
• 100% apure
matte tinchange
plated lead
finish allowing
excellent
and
voltage
and
boasts
a
minimal
change
in
capacitance
with
solderability
reference
to ambient
temperature.
Capacitance
change (60/40)
is limited
• SnPb plated
lead finish
option available
upon request
to
±15%
from
-55°C
to
+125°C.
These
devices
meet
the
• Encapsulation meets flammability standard UL 94 V–0 flame test
requirements outlined in UL Standard 94 V–0..
Ceramic Capacitors
Through-Hole
Aximax, 400 Series, Axial, Conformally Coated,
Z5U Dielectric, 50 and 100 VDC (Commercial Grade)
Benefi
ts
Aximax, 400 Series, Axial,
Conformally
Coated, C0G Dielectric, 50 – 200 VDC
Ordering
Capacitance Range: 1 pF toOverview
μF •Information
Temperature
• 0.015
Axial through-hole
form factor
• Conformally
coated
• Non-polar
device, minimizing
installation
concernsinsulation
KEMET’s
Aximax
conformally
coated
axial
through-hole
ceramic
or
in which
dielectric
C
410
C
5 other applications
G
5
T losses, high
A
472
J
7200
•capacitors
Encapsulation
flammability
standard
UL 94 V–0
100% pure
tin platedstability
lead finish
allowing
for excellent
in Z5Umeets
dielectric
feature an
85°C maximum
operating •resistance
andmatte
capacitance
are not
of major
importance.
Packaging/
Specifi
cation/temperature
Capacitance
RatedZ5U
Voltage
Failure
•temperature
-55°C to +125°C
operating
range Capacitance
solderability
2
and are
considered
The
exhibits
a predictable
in Finish
capacitance
with respect
Dielectric
Designchange
Lead
Ceramic Style/Size
Grade to
Series
Code (pF)
Tolerance1
(VDC)
Rate
•Electronics
RoHS Compliant
•
SnPb
plated
lead
fi
nish
option
available
upon
(60/40)
Industries Alliance (EIA) characterizes Z5U dielectric
time and voltage and displays wide variations inrequest
capacitance
with
(C-Spec)
• X7R
Temperature
dielectric
410material.
C =stable
Standard
2 signifi
C = ±0.25
5 = 50referenceGto= ambient
C0G 5 =temperature.
Multilayer T =Capacitance
100%
A =change
N/A Blank
= Bulk
as
a Class
III
Components
ofcant
thisdigits
classification
arepFfixed,
is limited
412ratings
number
of zeros
Ddecoupling
=250
±0.5VpF
1 = 100
Matte Sn
7200 = 12"
• DC voltage
of 25 V,suited
50+V,
100
V,
200 and
V and
ceramic
dielectric
capacitors
for bypass
to +22%, -56% from +10°C to +85°C.
420 offerings ranging from
Use10
9 for
2 = 200
H = SnPb
Reel
• Capacitance
pF to 4.7 FμF= ±1%
430
1.0 – 9.9 pF
G = ±2%
(60/40)
7293 = Ammo
• Available440
capacitance tolerances Use
of ±5%,
±10%
and
±20%
8 for
J = ±5%
Pack
0.5 – .99 pF
K = ±10%
Radial Through-Hole Multilayerex.Ceramic
Capacitors
2.2 pF = 229
Benefits
Applications
ex. 0.5 pF = 508
Goldmax, 300 Series,
Radial, Conformally Coated,
capacitance tolerance offerings may be available. Contact KEMET for details.
• Additional
Axial through-hole
technology
Typical applications include limited temperature, decoupling and
C0G
Dielectric, 50 – 200 VDC (Commercial
Grade)
Lead materials:
• Conformally coated
bypass.
1
2
Standard:
100% matte tinCoated,
(Sn) with nickel
(Ni) underplate
and steel25
core–
( “T”
designation).
Aximax, 400 Series, Axial,
Conformally
X7R
Dielectric,
250
VDC
• +10°C to +85°C operating temperature range
AlternativeInformation
1: 60% tin (Sn)/40% lead (Pb) finish with copper-clad steel core ( “H” designation).
to 4.7
μF • Temperature
• RoHS Compliant
Alternative 2: 60% tin (Sn)/40% lead (Pb) finish with 100% copper core (available with “H” designation code with C-Spec). Contact KEMET for C-Spec details.
•Overview
DC voltage ratings of 50 V, 100 V and 200 V
C
410
C
105
K
3
R
5
T
A world. One
7200
One
KEMET
•© KEMET
Capacitance
offerings ranging
from
6,800• Greenville,
pF to 2.2SC
μF29606 (864) 963-6300 • www.kemet.com
•
P.O.
Box
5928
C1040_AXIMAX_C0G
•
4/16/2015
Specifi
cation/ coated
Capacitance
Failure
Packaging/Grade
Goldmax
conformally
radial and
through-hole
Q and
stability of Design
capacitanceLead
characteristics
are required.
C0G 1
•KEMET’s
Available
capacitance
tolerances
of ±20%
+80%/-20%
Dielectric
Finish2
Ceramic
Style/Size
1
Series
Code
(pF)
Tolerance
(VDC)
Rate
(C-Spec)
capacitors
C0G dielectric
featureconcerns
a 125°C maximum
•ceramic
Non-polar
device,inminimizing
installation
410
C = Standard
2 significant
J = ±5%
3 = 25
R = X7Ra negligible
5 = Multilayer
T = 100%
A = N/A
Blank = Bulkto
temperature.
The Electronics
Industries
Alliance
(EIA)
and boasts
change
in capacitance
with reference
•operating
100% pure
matte
tin-plated
lead
fi
nish
allowing
for
excellent
412
5 = 50
Matte Sn
7200 = 12" Reel
characterizes
C0G
dielectric
as
a
Class
I
“stable”
material.
ambient
temperature.
Capacitance
change
is
limited
to ±30 ppm/
solderability
420
of zeros
M = ±20%
1 = 100
H = SnPb
7293 = Ammo
Components
of
this
classifi
cation
are
temperature
compensating
ºC
from
-55°C
to
+125°C.
These
devices
meet
the
fl
ame
430 lead finish option available upon request (60/40)
2 = 200
(60/40)
Pack test
• SnPb-plated
440 for resonant circuit applications or those where
A = 250 requirements outlined in UL Standard 94 V–0.
and
are
suited
• Encapsulation meets flammability standard UL 94 V–0
Lead materials:
Benefi
ts 100% matte tin (Sn) with nickel (Ni) underplate and steel core ( “T” designation).
Standard:
Ordering
pF
toAlternative
2.2through-hole
μF •2:Temperature
Range: +10°C to +85°C
60% tin form
(Sn)/40%
lead (Pb) finish with 100% copper core (available
with “H”
designation
code with C-Spec). Contact KEMET for C-Spec details.
• Radial
factor
• High
thermal
stability
1
2
Aximax, 400 Series, Axial, Conformally Coated, Z5U Dielectric, 50 – 100 VDC
• Conformally coated
C
410
C
105
K
3
U
5
One
KEMET
A world. One
7200
T
• KEMET
0.100",Electronics
0.200" and
0.400" lead
• No capacitance
change with respect
to applied rated• DC
voltage 1
©
Corporation
• P.O.spacing
Box 5928 • Greenville, SC 29606 (864) 963-6300
• www.kemet.com
C1041_AXIMAX_X7R
4/16/2015
cation/temperature
Capacitance
Rated Voltage
Failure
Packaging/Grade
2
•Ceramic
-55°C Style/Size
to +125°CSpecifi
operating
rangeCapacitance
•
Negligible
capacitance
change
with
respect
to
temperature
from
Dielectric
Design
Lead Finish
Series
Code (pF)
Tolerance1
(VDC)
Rate
(C-Spec)
•
•
•
•
RoHS Compliant
-55°C to +125°C
410
C = Standard Two significant M = ±20%
5 = 50
U = Z5U 5 = Multilayer
DC voltage
ratings
of 50 V, 100 V and 200 V
412
digits + number Z =+80%, -20% 1 = 100
Capacitance
1.0 pF up to 0.12 μF
420 offerings ranging from
of zeros
Available430
capacitance tolerances of ±0.5 pF, ±1%, ±2%, ±5%,
and ±10%440
1
• Additional
Extremely
low ESR and ESL
2
A = N/A
T = 100%
Matte Sn
H = SnPb
(60/40)
Blank = Bulk
7200 = 12" Reel
7293 = Ammo
Pack
Lead materials:
Standard: 100% matte tin (Sn) with nickel (Ni) underplate and steel core ( “T” designation).
Ordering
to 0.15
μF • Temperature Range: −55°C to +125°C
Goldmax, 300 Series, Radial, Conformally Coated, C0G Dielectric, 50 – 200 VDC
Capacitance Range: 1 pF
C
320
C
153
J
5
G
Specification/
Capacitance
Dielectric
Ceramic
Style/Size
Series
Code (pF)
Tolerance1
(VDC)
315
316
317
318
320
321
322
323
335
336
340
346
350
356
C = Standard 2 significant digits
+ number of zeros
Use 9 for
1.0 – 9.9 pF
Use 8 for
0.5 – .99 pF
ex. 2.2 pF = 229
ex. 0.5 pF = 508
B = ±0.1 pF
C = ±0.25 pF
D = ±0.5 pF
F = ±1%
G = ±2%
J = ±5%
K = ±10%
5 = 50
1 = 100
2 = 200
G = C0G
T
OneAworld. One
KEMET
7301
C1042_AXIMAX_Z5U • 4/16/2015
1
Lead
Failure Packaging/Grade
Design
2
3
Finish
Rate
(C-Spec)
5=
T = 100% A = N/A
Multilayer Matte Sn
H = SnPb
(60/40)
Blank = Bulk
7301 = 12" Reel
7303 = 12" Reel
7293 = Ammo
Pack
Lead materials:
Alternative 1: 60% tin (Sn)/40% lead (Pb) finish with copper-clad steel core ( “H” designation).
3
Reeling options:
C-Spec 7301: Recommended for straight lead configuration part types.
C-Spec 7301: Recommended for formed (bent) lead configuration part types.
1
2
46
324
325
326
327
328
330
331
333
5
•Overview
0.100", 0.200", and 0.400" lead spacing
• RoHS Compliant
KEMET’s
Goldmax conformally coated radial through-hole
• X7R temperature
ceramic
capacitors instable
Z5U dielectric feature an 85°C maximum
•operating
DC voltage
ratings ofand
25 V,
V, 100 V, 200
V and 250 V
temperature
are50considered
•The
Capacitance
offerings
ranging
from
100
pF
to
10 μF
Electronics Industries Alliance (EIA) characterizes
•Z5U
Available
capacitance
tolerances
of
±5%,
±10%,
±20%
dielectric as a Class III material. Components of
this and
+80%/-20%
classifi
cation
are
fi
xed,
ceramic
dielectric
capacitors
suited
Grade
(cont.)
Radial
Through Hole Multilayer Ceramic Capacitors for
• High temperature
solder
lead attach
bypass
and decoupling
or other
applications in which dielectric
Ceramic Capacitors
Through-Hole
Commercial
solderability
• SnPb-plated lead finish option available upon request (60/40)
• Encapsulation
meetsresistance
flammability
UL 94stability
V–0 are
losses,
high insulation
andstandard
capacitance
not of major importance. Z5U exhibits a predictable change in
capacitance with respect to time and voltage and displays wide
variations in capacitance with reference to ambient temperature.
Capacitance change is limited to +22%, -56% from +10°C to
+85°C.
Radial,Conformally
Molded, C0G
Dielectric,
50 – 200
VDCVDC
Goldmax, 300 Series, Radial,
Coated,
X7R Dielectric,
25 – 250
Ordering
Capacitance Range: 100 pF(Commercial
to 10 μF • Information
Temperature
Grade)
C ts
Benefi
320
C
Specification/
Style/Size technology
Overview
•Ceramic
Radial through-hole
Series
106
Capacitance
Code (pF)
K
3
R
5
T
A
7301
Lead
Dielectric Design
2
nish allowing
Tolerance1 • 100%
Ratefor excellent
(C-Spec)3
(VDC)pure matte tin-plated lead fiFinish
• Conformally
315 coated
324 335 C = Standard
2 significant
J = ±5%
3solderability
= 25
R = X7R
5=
T = 100% A = N/A Blank = Bulk
KEMET’s
epoxy325
molded
through-hole
capacitors
Q
and
capacitance
characteristics
arerequest
required.
336radial
+ number
K = ±10%
= 50stability of
Matte Sn upon
7301(60/40)
= C0G
12" Reel
• 0.100", 316
0.200",
and 0.400"
lead
spacingdigitsceramic
• 5SnPb-plated
lead
finishMultilayer
option
available
317
326
340
of
zeros
M
=
±20%
1
=
100
H
=
SnPb
7303
Reel
in
C0G
dielectric
feature
a
125°C
maximum
operating
exhibits
no
change
in
capacitance
with
respect
to
time
and
voltage
• +10°C to +85°C operating temperature range
• Encapsulation meets flammability standard UL 94 V–0 = 12"
318 The
327Electronics
346
Z = +80%
2 =boasts
200
(60/40)
7293 = Ammo
temperature.
Industries
Alliance
(EIA)
and
a
negligible
change
in
capacitance
with
reference
to
• RoHS Compliant
320 328 350
-20%
A = 250
Pack
characterizes
C0G
a Class
“stable”
ambient temperature. Capacitance change is limited to ±30 ppm/
• DC voltage
of35650 V,as
100
V and I200
V material.
321 ratings
330 dielectric
Components
this classifi
cationfrom
are temperature
compensating
ºC from -55°C to +125°C. These devices meet the flame test
322 of offerings
331
• Capacitance
ranging
1,000 Capacitors
pF to 6.8
μF
Radial
Hole
Multilayer
Ceramic
323 for
333
and
areThrough
suited
resonant
circuit of
applications
or those
where
requirements outlined in UL Standard 94 V–0.
• Available
capacitance
tolerances
±20%, +100/-0
and +80%/-20%
1
capacitance
offerings
may be available.
• Additional
Non-polar
device, tolerance
minimizing
installation
concernsContact KEMET for details.
Radial, Molded, X7R Dielectric, 50 – 200 VDC
Lead materials:
Standard: 100% matte Grade)
tin (Sn) with nickel (Ni) underplate and steel core ( “T” designation).
(Commercial
Goldmax, 300 Series, Radial,
Conformally
Coated, Z5U Dielectric, 50 – 200 VDC
2
ts • Information
Ordering
Capacitance Range: 100 pFBenefi
to 10
μF
Temperature
Range:
+85°C
Alternative
2: 60% tin (Sn)/40%
lead (Pb) +10°C
finish withto
100%
copper core (available with “H” designation code with C-Spec). Contact KEMET for C-Spec details.
3
Reeling options:
2
Lead materials:
• Radial
through-hole
form factor
• No capacitance change with respect to
Recommended
for straight
guration part types.
CC-Spec 7301:335
C lead confi225
M
5
U
5
T
A
7303
Overview
• Molded
C-Speccase
7301: Recommended for formed (bent) lead configuration part types. applied rated DC voltage
Specification/ Capacitance
•KEMET’s
-55°C toepoxy
+125°C
operating
range
• Negligible or
capacitance
change
withLead
respect
One world.
OneQKEMET
Dielectric
Design
Ceramic
Style/Size
molded
radialtemperature
through-hole
ceramic
for
frequency
discriminating
Finish2 circuits
Series
Code
(pF) capacitors
Tolerance1 applications
Rate where
(VDC)
(C-Spec)3
•© KEMET
DC
ratings
of 50
V,125°C
and
200
Voperating
to stability
temperature
from -55°Ccharacteristics
to C1050_GOLDMAX_X7R
+125°C are not critical.
Electronics
Corporation
•100
P.O. V
Box
5928
• Greenville,
SC 29606 (864) 963-6300
• www.kemet.com
• 4/16/2015
1
in
X7Rvoltage
dielectric
feature
an
maximum
and
of
capacitance
315
324
335 C = Standard 2 significant M = ±20%
5 = 50
U = Z5U
5=
T = 100% A = N/A Blank X7R
= Bulk
•temperature
Capacitance
offerings
ranging “temperature
from 1.0digits
pF up
to 0.18 μF
• No
capacitance
decay
with
time
are considered
a predictable
change
in capacitance
time
316 and325
336
+stable.”
number The
Z = +80%, -20%exhibits
1 = 100
Multilayer
Matte Sn with respect
7301 to
= 12"
Reel
•Electronics
Available
capacitance
tolerances
±0.5 pF,
±1%,
±2%,
±5%, •and
Non-polar
device,
minimizing
installation
317Industries
326 Alliance
340
of zeros
2voltage
= 200 and
H = SnPb
7303 with
= 12" Reel
(EIA)ofcharacterizes
X7R
dielectric
boasts
a minimal
change
in capacitance
318
327
346
(60/40)
7293 = Ammo
and
±10%
concerns
as a Class320II 328 350
reference to ambient temperature. Capacitance change
is
limited
•material.
No piezoelectric
noise
•to SnPb-plated
lead fito
nish
(60/40)These devices meet Pack
Components
of
±15% from -55°C
+125°C.
the flame test
321
330
356this classification are fixed, ceramic
• Extremely
low331
ESRsuited
and ESL
• 100% pure matte
tin-plated
lead finish
322
dielectric
capacitors
for bypass and decoupling
requirements
outlined
in UL Standard
94 option
V–0. available upon
323 stability
333
• High thermal
request (RoHS)
1• High ripple current capability
Benefits
Information
0.18
μF • Temperature
Range:
+125°C
Alternative
2: 60% tin (Sn)/40%
lead (Pb)−55°C
finish withto100%
copper core (available with “H” designation code with C-Spec). Contact KEMET for C-Spec details.
Radial, Molded, C0G Dielectric,
100 – 200 VDC
• Radial through-hole form factor
• 100% pure matte tin-plated lead finish option available upon
3
options:
• Reeling
Molded
case
request (RoHS)
7301: Recommended
for straight272
lead configuration part
CC-Spec052
C
F types.
2
G
5
T
A
7303
• -55°C
to 7301:
+125°C
range
C-Spec
Recommended
for formed (bent)
lead configuration part types. • Encapsulation meets flammability standard UL 94 V–0
Capacitance
•Ceramic
RoHSStyle/Size
CompliantSpecification/
Dielectric
Design
Lead Finish2
3
Series
Tolerance1
(VDC)
Rateworld. One
(C-Spec)
One
KEMET
• X7R temperature stable
dielectric Code (pF)
Electronics
P.O.
Box 5928
• Greenville,
29606
963-6300 • G
www.kemet.com
• 4/16/2015
052ratings
CCorporation
= of
Standard
2 signifi
cant
digits
pF (864)
1 = 100
= C0G 5 = Multilayer T =C1051_GOLDMAX_Z5U
100%
A = N/A Blank
= Bulk 1
•© KEMET
DC voltage
50 V,•100
V
and
200
V + D =SC±0.5
062
number of zeros
F = ±1%
2 = 200
Matte Sn
7301 = 12" Reel
• Capacitance
from
to pF
3.3 μF
512 offerings ranging
Use
9 for10
1.0pF
– 9.9
G = ±2%
C = SnPb
7303 = 12" Reel
• Available522
capacitance tolerances
and
Use 8of
for±10%
0.5 – .99
pF±20%
J = ±5%
(60/40)
7293 = Ammo
ex. 2.2 pF =concerns
229
K = ±10%
Pack
• Non-polar device, minimizing installation
ex. 0.5 pF = 508
• SnPb-plated lead finish (60/40)
Lead materials and finishes:
Standard: 60% tin (Sn)/40% lead (Pb) finish with 100% copper core ( “C” designation).
Optional
& C062 only):Range:
100% matte
tin (Sn) to
with+125°C
nickel (Ni) underplate and steel core ( “T” designation).
Information
pF Ordering
to 3.3
μF • (C052
Temperature
−55°C
Alternative lead materials and finishes may be available. Contact KEMET for details.
3
Reeling options:
CC-Spec062
C
105
1
R
5
7301: Recommended
for straight
lead configurationKpart types.
C-Spec 7301: Recommended
(bent) lead confi
guration part
types.
Specification/for formed
Capacitance
Capacitance
Rated
Voltage
Dielectric
Design
Ceramic Style/Size
Series
Code (pF)
Tolerance1
(VDC)
1
2
Radial, Molded, X7R Dielectric, 50 – 200 VDC
T
Lead Finish2
A
7301
3
Rate
(C-Spec)
One
world. One
KEMET
052
C = Standard• P.O. Box
2 signifi
cant
K = ±10%
= 50963-6300 R
= X7R 5 = Multilayer
T = 100%
A = N/A Blank
= Bulk 1
Corporation
5928
• Greenville,
SC 29606 5(864)
• www.kemet.com
C1058_C0G_RADIAL_MOLDED
• 4/16/2015
062
1 = 100
Matte Sn
7301 = 12" Reel
512
of zeros
2 = 200
C = SnPb
7303 = 12" Reel
522
(60/40)
7293 = Ammo
Pack
Lead materials and finishes:
Optional (C052 & C062 only): 100% matte tin (Sn) with nickel (Ni) underplate and steel core ( “T” designation).
3
Reeling options:
1
2
47
operating temperature. The Electronics Industries Alliance
• Capacitance offerings ranging from 1.0 pF up to 0.18 μF
(EIA) characterizes X7R dielectric as a Class II “temperature
• Available capacitance tolerances of ±0.5 pF, ±1%, ±2%, ±5%,
stable” material. Components of this classification are fixed,
and ±10%
ceramic dielectric capacitors suited for bypass and decoupling
• No piezoelectric noise
applications or for frequency discriminating circuits where Q
• Extremely low ESR and ESL
• High thermal stability
and voltage and boasts a minimal change in capacitance with
• SnPb-plated lead finish (60/40)
to ±15% from -55°C to +125°C. These devices meet the flame test
requirements outlined in UL Standard 94 V–0.
Ceramic Capacitors
Through-Hole
Benefi
ts
Commercial Grade
(cont.)
Applications
Axial, Molded, C0G Dielectric,
100 – 200
VDC Ceramic Capacitors
• Axial Through-Hole
through-hole
form
factor
Radial
Multilayer
Typical applications include decoupling, bypass, filtering and
transient voltage suppression.
μF •case
Temperature
• 0.1
Molded
High
Temperature 200°C, Radial, Molded, C0G Dielectric,
C
C (Industrial
F
1
G
5
114 VDC
• X7R
stable
dielectric 681 Grade)
50
– temperature
200
C
A
7200
• DC voltage
50 V andCapacitance
100 V
Style/ratings
Specifiofcation/
Failure
Packaging/Grade
Dielectric
Design
Lead Finish2
Ceramic
Size offerings
Seriesranging from
Code10
(pF)pF to 3.3
Tolerance
(VDC)
Rate
(C-Spec)
• Capacitance
μF 1
C = Standard
2 signifiofcant
digitsandD ±20%
= ±0.5 pF
1 = 100
G = C0G 5 = Multilayer
C = SnPb
A = N/A Blank = Bulk
• Available114capacitance
tolerances
±10%
Overview
124device, minimizing+ installation
number of zeros
F = ±1%
2 = 200
(60/40)
7200 = 12" Reel
• Non-polar
concerns
192
Use 9 for
G = ±2%
7293 = Ammo
• SnPb-plated
lead finish (60/40)
202 Temperature
1.0epoxy
– 9.9 pFmolded
J =radial
±5%
Pack voltage
KEMET’s
High
200ºC
With virtually no capacitance change at 200°C and rated
• Encapsulation
meets
flammability
standard
ULK =94
V–0 a
222ceramic
8 for
±10%
through-hole
capacitors
inUse
C0G
dielectric
features
applied, these radial molded capacitors in C0G dielectric are
0.5 – .99 pF
robust and proprietary base metal
dielectric
temperature compensating and are suited for resonant circuit
ex. 2.2
pF = 229system that offers
industry-leading performance inex.
extreme
applications or those where Q and stability of capacitance
0.5 pF =high
508 pressure and
high
temperature
environments
up
to
200°C.
These
capacitors
characteristics are required. They exhibit no change in capacitance
1
2
are
designed
with respect to time and voltage and boast a negligible change in
Lead
materials:specifically to withstand the severe shock and
vibration
conditions
associated
with
deep-well
and
horizontal
Standard:
60%
tin
(Sn)/40%
lead
(Pb)
fi
nish
with
100%
copper
core
(
“C”
designation).
Axial, Molded, X7R Dielectric, 50 – 100 VDC
Alternative
lead
materials
andsuited
finishesfor
mayuse
be available.
Contact KEMET for change
details. is limited to ±30ppm/ºC from -55°C to +200°C. In addition,
drilling
activities
and
are
well
in
aerospace
Ordering
Information
engine compartments, geophysical probes, hybrid and electric
these capacitors exhibit high insulation resistance
withOne
low KEMET
One world.
automotive
motor drives
applications.
dissipation
temperatures
upAto 200°C,
as well as1
C Electronics
114
Cand defense
R factor at elevated
5
C
7200
© KEMET
Corporation
• P.O. Box472
5928 • Greenville,MSC 29606 (864)1 963-6300
• www.kemet.com
C1045_C0G_AXIAL_MOLDED
• 4/16/2015
low
ESR
at
high
frequencies.
Specification/ Capacitance
Dielectric
Design
Lead Finish2
Ceramic
Style/Size
As
high temperature
electronic
module
increases,
1
Series
Code complexity
(pF)
Tolerance
Rate
(C-Spec)
(VDC)
the size reduction
ofC components
becomes
more 5 = 50
114
= Standard
2 significantmore
K =and
±10%
R = X7R 5 = Multilayer
C = SnPb
A = N/A Blank = Bulk
critical. These
cantly+ number
smaller by
124 devices are signifidigits
M =volume
±20%
1 = 100
(60/40)
7200 = 12" Reel
192
zeros
7293 = Ammo
than most competitor
radial molded ofcapacitors,
allowing for
Pack
downsizing 202
and replacement opportunities of larger high
222
temperature precious metal electrode (PME) and base metal
1
Additional (BME)
capacitance
tolerance
offerings
may be They
available.
Contact
KEMET for details.
electrode
dielectric
system
devices.
feature
gold2
Lead materials:
plated
lead wires for temperature resistance and an epoxy molded
60% tin (Sn)/40%
lead (Pb)
with 100% durability.
copper core ( “C” designation).
for125ºC)
environmental
protection
andfinish
mechanical
High Temperaturecase(>Standard:
High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade)
Capacitance Range: 1 pF upOrdering
to 0.22Electronics
μFInformation
• Temperature
Range:
to +200°C
© KEMET
Corporation • P.O.
Box 5928−55°C
• Greenville,
SC 29606 (864) 963-6300 • www.kemet.com
C
052
H
Specification/
Ceramic Style/Size
Series
052
062
272
Capacitance
Code (pF)
H = High Temp 2 Sig. Digits + Number
200ºC
of Zeros
Use 9 for 1.0 – 9.9 pF
ex. 2.2 pF = 229
F
2
G
Dielectric
Tolerance1
(VDC)
B = ±0.1 pF
C = ±0.25 pF
D = ±0.5 pF
F = ±1%
G = ±2%
J = ±5%
K = ±10%
5 = 50
1 = 100
2 = 200
C1046_X7R_AXIAL_MOLDED • 4/16/2015
5
Design
G
A
7301
Lead Finish2
Failure
Rate
Packaging
C-Spec3
1
G = C0G 5 = Multilayer G = Gold (Au) A = N/A Blank = Bulk Bag
T250 = 250 pcs /
12" Reel
T500 = 500 pcs /
12" Reel
T1K0 = 1,000
pcs / 12" Reel
7301 = Full Reel
Qty / 12" Reel
7303 = Full Reel
Qty / 12" Reel
7061 = Bulk Tray
Wire lead materials and finishes: Alternative lead materials and finishes may be available. Contact KEMET for details.
3
Default packaging for this product series is "Bulk Bag". KEMET will assume "Bulk Bag" packaging is required when the 15th thru 18th character positions are left blank.
3
C-Spec 7301 can only be used when ordering 052 style/size.
3
1
2
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1073_HT_C0G_RADIAL_MOLDED • 4/16/2015
48
1
As high temperature electronic module complexity increases,
the
size reduction of components becomes more and more
Overview
critical. These devices are significantly smaller by volume
than most competitor radial molded capacitors, allowing for
downsizing and replacement opportunities of larger high
temperature precious metal electrode (PME) and base metal
electrode
(BME)Ceramic
dielectricCapacitors
system devices. They feature goldThrough-Hole
plated lead wires for temperature resistance and an epoxy molded
environmental
protection and mechanical durability.
Temperaturecase(>for125ºC)
(cont.)
Ceramic Capacitors
Through-Hole
HV Series, 200ºC, C0G & X7R Dielectric,
Radial Conformally Coated, 500 – 4,000 VDC
High Temperature 200°C, Radial, Molded, X7R Dielectric, 50 – 200 VDC (Industrial Grade)
High
Information
Capacitance Range: 1,000 Ordering
pF up to 1 μF
Overview
C
062
H
Specification/
Ceramic Style/Size
Series
052
062
Through-Hole
K
105
Capacitance
Code (pF)
5
R
Dielectric
Tolerance1
(VDC)
H = High Temp 2 significant digits + J = ±5%
200ºC
number of zeros
K = ±10%
Use 9 for 1.0 – 9.9 pF M = ±20%
Ceramic Capacitors
ex. 2.2 pF = 229
5 = 50
1 = 100
2 = 200
5
G
Design
Lead Finish
2
A
7303
Failure
Rate
Packaging
C-Spec3
R = X7R 5 = Multilayer G = Gold (Au) A = N/A
ACR/ACA/ARR/ARA Series, 200ºC, C0G & X7R Dielectric,
Axial & Radial, 50 – 100 VDC
Overview
Blank = Bulk Bag
T250 = 250 pcs /
12" Reel
T500 = 500 pcs /
12" Reel
T1K0 = 1,000
pcs / 12" Reel
7301 = Full Reel
Qty / 12" Reel
7303 = Full Reel
Qty / 12" Reel
7061 = Bulk Tray
Wire lead materials and finishes: Alternative lead materials and finishes may be available. Contact KEMET for details.
3
Default packaging for this product series is "Bulk Bag". KEMET will assume "Bulk Bag" packaging is required when the 15th thru 18th character positions are left blank.
3
Information
pF3Ordering
to 2.7 7303
μF •can
Temperature
−55°C
to +200°C
C-Spec
only be used whenRange:
ordering 062
style/size.
1
2
HT/HP Series, 200ºC, C0G & X7R Dielectric, Axial & Radial, 25 – 200 VDC
HT06
A
W
472
HT05 – HT16
HP05 – HP16
A = 25
B = 50
C = 100
D = 200
N = C0G (NP0)
W = X7R
K
Capacitance
Rated Voltage
Dielectric
Style/Size
Code (pF)
(VDC)
N
C1074_HT_X7R_RADIAL_MOLDED • 4/16/2015
Capacitance
Lead Finish
Tolerance
number of zeros
J = ±5%
K = ±10%
M = ±20%
1
N = Nickel (Standard)
C = Solder Coated Clad
Steel
HV Series, 200ºC, C0G & X7R Dielectric, Radial Conformally Coated, 500 – 4,000 VDC
Information Range: −55°C to +200°C
to 1.0 μF • Temperature
10
HV12
Rated Voltage
(VDC)
Style/Size
W
472
K
Dielectric
Capacitance
Code (pF)
Capacitance
Tolerance
N
M
Lead Finish
Group A Screening
One world.
One KEMET
N = Nickel (Standard)
MIL-PRF-49467
C = Solder Coated
(Subgroup
1) except 1
• 4/16/2015
Clad Steel
Corona
05 = 500
HV10 – HV16
N = C0G (NP0)
2 significant digits + J = ±5%
= 1,000
W =• Greenville,
X7R
of zeros • www.kemet.com
K = ±10%
©10
KEMET
Electronics Corporation • P.O. Box 5928
SC 29606number
(864) 963-6300
20 = 2,000
M = ±20%
30 = 3,000
40 = 4,000
ACR/ACA/ARR/ARA Series, 200ºC, C0G & X7R Dielectric, Axial & Radial, 50 – 100 VDC
A
Series
C
R
Dielectric
Lead
Configuration
06
B
103
K
Case Size
Rated Voltage
(VDC)
Capacitance
Code (pF)
Capacitance
Tolerance
A = High
C = C0G
(NP0)/BP
= Axial
05 – 09 =SC 29606
B =(864)
50 963-6300
2 signifi
cant digits J = ±5%
© KEMET
Electronics
Corporation
• P.O.ABox
• www.kemet.com
Temperature R = X7R (BX)
R = Radial
Radial
D = 100
Axial and
16 – 69 =
S = Special
M = ±20%
Radial
Axial
Capacitors
G
S
Grade/
Lead Finish
One world.Test
OneLevel
KEMET
W = Solder
Coated Copper
Clad Steel
G = Gold Plated
Copper Clad
Steel
S = Standard
• 4/16/2015
1
A = MIL-PRF-39014,
Group A Test
A = MIL-PRF-20
(C0G)
X = Special
• 4/16/2015
491
Axial Through-Hole Multilayer Ceramic Capacitors
Ceramic Capacitors
Aximax, 400 Series, Axial, Conformally Coated, X8L
Dielectric, 25 – 50 VDC (Commercial & Automotive Grade)
Through-Hole
Overview
High Temperature (> 125ºC) (cont.)
KEMET’s Aximax conformally coated axial through-hole
TCR/TRR/TCA/TRA Series,
X7R Dielectric,
& Radial,
50 – 100
VDC were developed for critical applications
ceramic260ºC,
capacitorsC0G
in X8L&dielectric
feature a 150°CAxial
maximum
X8L dielectric
capacitors
to 5.6 μFtemperature
• Temperature
operating
and is considered "general purpose high
where reliability at higher operating temperatures are a concern.
temperature". These components are fixed, ceramic dielectric
These capacitors are widely used in automotive circuits as well as
06
103
T
C
R
B
K
G
S
general high temperature applications.
Grade/
Rated Voltage
Capacitance
Capacitance
Lead Capacitors
Axial
Through-Hole
Multilayer
Ceramic
Lead Finish
SizeQ and
Series or frequency
Dielectricdiscriminating circuitsCase
applications
where
Test Level
(VDC)
Code (pF)
Tolerance
Configuration
stability
of
capacitance
characteristics
are
not
critical.
X8L
In
addition
to
commercial
grade,
automotive
T = High
C = C0G (NP0)/BP A = Axial
05 – 09 =
B = 50
2 significant digits J = ±5%
W = Solder gradeS devices
= Standard
exhibits
a predictable
in capacitance
respect toDtime
the demanding
Temperature
R = X7Rchange
(BX)
R = Radial with
Radial
= 100 are+available
number of and
zerosmeet
K = ±10%
CoatedAutomotive
Copper A Electronics
= MIL-PRF-20,
and and boasts a minimal change in capacitance
16 – 69 = with
= ±20%
Steel
Group A Test (C0G)
andAxial
voltage
Council's AEC-Q200Mqualifi
cation Clad
requirements.
Radial
Axial
G = Gold Plated A = MIL-PRF-39014
reference
to ambient temperature up to 125°C. Beyond 125°C
Capacitors
Copper Clad
(X7R)
These devices meet the flame testSteel
requirements outlined
in UL
X = Special
change is limited to ±15% from -55°C to +125°C and +15, -40%
Standard 94V-0.
Overview
from 125°C to 150°C.
KEMET’s Aximax conformally coated axial through-hole ceramic
for a more robust and reliable component, the Ultra-Stable X8R
VCR/VRR Series, 200ºC,
C0G & X7R Dielectric, Radial, 500 – 5,000 VDC
capacitors
in
Ultra-Stable
X8R
dielectric
feature
a
150°C
dielectric Aximax though-hole capacitors were developed for
maximum operating temperature, offering the latest in high
critical applications where reliability and capacitance stability at
temperature
dielectric
technology
and
reliability
for
extreme
higher operating
102 temperatures
A
V
C
R
40
M
K are a concern.
W These capacitors
temperature applications. It offers theLead
same temperature
used in automotive
as generalGrade/
high
Case
Rated Voltageare widely
Capacitance
Capacitancecircuits as well
Lead Finish
Series
Dielectric
capability
as conventional
X8R, butConfi
without
the capacitance
applications.
Test Level
guration
Size
(VDC) temperature
Code (pF)
Tolerance
• 4/16/2015
1
lossVdue
to applied
DC (NP0)/BP
voltage. Ultra-Stable
exhibits
= High
R = Radial X8R 07
L =no
500
C = C0G
W = Solder
S = Standard
Voltage in
Radial
R = X7R (BX)
M = 1,000
+ numbertoofCommercial
zeros K = ±10%
Coated Copper
A =devices
MIL-PRF-20,
change
capacitance
with respect to voltage and40boasts
In addition
Grade, Automotive
Grade
Capacitors
50
T = 2,000
M = ±20%
Clad Steel
Group A Test
a minimal change in capacitance with reference to60ambient
are available and meet the demanding
V = 3,000
G = Gold Plated X = Special
temperature. It is a suitable replacement for higher70capacitance
Council's AEC-Q200 qualification requirements.
W = 4,000
Copper Clad
80
X = 5,000
Steel
and larger footprint devices that fail to offer capacitance
stability. Capacitance change with respect to temperature is
These devices meet the flame test requirements outlined in UL
limited to ±15% from -55ºC to 150ºC. Driven by the demand
Standard 94V-0.
Aximax, 400 Series, Axial, Conformally Coated, Ultra-Stable
X8R Dielectric, 50 – 200 VDC (Commercial & Automotive Grade)
Aximax, 400 Series, Axial, Conformally Coated, X8L Dielectric, 25 – 50 VDC (Commercial & Automotive Grade)
to 2.2 μF • Information
C
410
C
105
K
3
N
5
Specification/ Capacitance Capacitance Rated Voltage
Ceramic Style/Size
Dielectric
Design
1
Series • P.O.Code
(pF) • Greenville,
Tolerance
© KEMET Electronics Corporation
Box 5928
SC 29606(VDC)
(864) 963-6300 • www.kemet.com
410
430
C = Standard
2 significant J = ±5%
of zeros
M = ±20%
3 = 25 V
5 = 50 V
N = X8L
5=
Multilayer
Additional capacitance Tolerance offerings may be available. Contact KEMET for details.
Lead materials:
Information
pFOrdering
to 0.082
μF
Temperature
Range:
to +150°C
Alternative
1:•60%
tin (Sn)/40% lead
(Pb) finish−55°C
with copper-clad
steel core ( “H” designation).
Additional lead finish options may be available. Contact KEMET for details
T
A
Lead Finish
2
A = N/A
T = 100%
Matte Sn
H = SnPb
(60/40)
7200
Failure
Packaging/Grade
One world.
One KEMET
Rate
• (C-Spec)
4/16/2015
1
Blank = Bulk
7200 = 12" Reel
7293 = Ammo pack
AUTO = Automotive
grade
1
Aximax, 400 Series, Axial, Conformally Coated, X8R Dielectric, 50 – 200 VDC (Commercial & Automotive Grade)
2
C
410
C
472
J
5
H
5
Specification/ Capacitance Capacitance Rated Voltage
©Ceramic
KEMET Electronics
29606 (864) 963-6300
• www.kemet.com
Style/Size Corporation • P.O. Box 5928 • Greenville, SC
Dielectric
Design
Series
Code (pF)
Tolerance1
(VDC)
410
430
1
2
C = Standard
2 significant F = ±1%
of zeros
J = ±5%
K = ±10%
5 = 50
1 = 100
2 = 200
T
A
7200
2
C1072_AXIMAX_X8L
• 4/16/2015
1
Lead Finish
Rate
(C-Spec)
H = Ultra- 5 = Multilayer T = 100%
Stable X8R
Matte Sn
H = SnPb
(60/40)
A = N/A
Blank = Bulk
7200 = 12" Reel
7293 = Ammo
pack
AUTO =
Automotive grade
Additional capacitance Tolerance offerings may be available. Contact KEMET for details.
Lead materials:
Additional lead finish options may be available. Contact KEMET for details
50
C1071_AXIMAX_X8R • 4/16/2015
1
Overview
Benefits
KEMET’s 300 Series High Voltage Goldmax conformally coated
ambient temperature. Capacitance change is limited to ±15% from
radial
through-hole
ceramic
capacitors in X7R dielectric feature
-55°C to +125°C.
• Radial
through-hole
form factor
a• 125°C
maximum
operating temperature. The Electronics
Conformally
coated
Industries
Alliance
(EIA)
characterizes
X7R dielectric as a
These devices offer low leakage current, exhibit low ESR at high
• 0.100", 0.200"
and
0.400"
lead spacing
Class
II “temperature
stable” material.
Components
frequencies and find conventional use as snubbers or filters
• -55°C
to +125°C operating
temperature
range of this
classifi
cation
are fixed, ceramic dielectric capacitors suited
in applications such as switching power supplies and lighting
• RoHS
Compliant
for
bypass
andratings
decoupling
• DC
voltage
500applications
V, 1K V,
1.5 or
KV,forCapacitors
2frequency
KV, 2.5 KV and 3 KV ballasts. Their exceptional performance at high frequencies has
Radial
Through
HoleofMultilayer
Ceramic
High Voltage (> 500
V) offeringswhere
discriminating
Q and
stability
made them a preferred choice of design engineers worldwide. In
• Capacitancecircuits
ranging
from
1.0 pFofupcapacitance
to 0.12 μF
characteristics
are
not
critical.
X7R
exhibits
a
predictable
addition to their
use–in3,000
power supplies,
these capacitors are
widely
High Voltage Goldmax, 300 Series, Radial, Conformally Coated, C0G Dielectric,
500
VDC (Commercial
Grade)
change
in
capacitance
with
respect
to
time
and
voltage
and
used
in
industries
related
to
telecommunications,
medical,
military,
Ordering
Information
boasts a minimal change in capacitance with reference to
aerospace, semiconductor and test/diagnostic equipment.
Ceramic Capacitors
Through-Hole
High Voltage Goldmax , 600 Series, Radial, Conformally
Coated, C0G Dielectric, 500 – 3,000 VDC (Commercial Grade)
C
320
Overview
Ceramic
Style/Size
Benefits
C
332
Specification/
Series
Capacitance
Code (pF)
J
C
G
Dielectric
Tolerance1
(VDC)
5
T
Design
Lead
Finish2
A
7301
Rate
(C-Spec)3
324 335
= Standard
2 significonformally
cant digits + B = ±0.1 pF reference
C = 500 to ambient
G = C0Gtemperature.
5=
TCapacitance
= 100% A = N/A
Blankis=limited
Bulk
KEMET’s315
600 Series
HighCVoltage
Goldmax
change
316 through-hole
325 336
number meet
of zeros
C = ±0.25 pF toB±30
= 630ppm/ºC from -55°C
Multilayer
Matte Sn
7301 = 12" Reel
coated
special
to +125°C.
• Radialradial
through-hole
formceramic
factor capacitors
317 326 340
Use 9 for
D = ±0.5 pF
D = 1,000
H = SnPb
7303 = 12" Reel
lead
spacing
per MIL–PRF–49467.
OfferedFin= ±1%
• Conformally
coated
318 requirements
327
346
1.0 – 9.9 pF
F = 1,500
(60/40)
7293 = Ammo
C0G
dielectric,
these
capacitors
These
devices exhibit low ESR at high frequencies and
Use 8 formaximum
G = ±2%
G = 2,000
Packfind
320
328
• 0.100",
0.200"
and350
0.400"
leadfeature
spacinga 125°C
0.5
–
.99
pF
J
=
±5%
Z
=
2,500
321
330
356
operating
temperature.
The
Electronics
Industries
Alliance
(EIA)
conventional
use
as
snubbers
or
fi
lters
in
applications
such as
322 331
ex. 2.2 pF = 229 K = ±10%
H = 3,000
characterizes
C0G
dielectric
as
a
Class
I
“stable”
material.
switching
power
supplies
and
lighting
ballasts.
Their
exceptional
• RoHS Compliant
323 333Hole Multilayer Ceramic
ex. 0.5
pF = 508
Radial Through
Capacitors
Components
of this stable
classifidielectric
cation are temperature compensating performance at high frequencies has made them a preferred
• X7R temperature
1
suitedratings
for resonant
or those
• Lead
DCare
voltage
of 500 circuit
V, 1K V,applications
1.5 KV, 2 KV,
2.5 KVwhere
and 3 KV choice of design engineers worldwide. In addition to their use in
2and
materials:
and
stability
of capacitance
characteristics
areCoated,
required.
power
supplies,
capacitors
are (Commercial
widely used in industries
Standard:
100%
matte tin (Sn)Conformally
with
nickel (Ni) underplate
and steelX7R
core ( “T”
designation).
High Voltage Goldmax,Q300
Series,
Radial,
Dielectric,
500these
– 3,000
VDC
Grade)
Alternative
1:
60%
tin
(Sn)/40%
lead
(Pb)
fi
nish
with
copper-clad
steel
core
(
“H”
designation).
C0G
exhibits
no
change
in
capacitance
with
respect
to
time
related
to
telecommunications,
medical,
military, aerospace,
Capacitance Range: 10 pF 3Ordering
toReeling
0.56 options:
μF •Information
and voltage and boasts a negligible change in capacitance with
semiconductors and test/diagnostic equipment.
High Voltage Goldmax, 600 Series, Radial, Conformally
Coated, X7R Dielectric, 500 – 3,000 VDC (Commercial Grade)
Recommended for
CC-Spec 7301:
320
C formed (bent) lead
473configuration partK types.
Overview
C
R
5
T
A
7301
Specification/
Capacitance
Lead One
Failure
Packaging/Grade
world.
One KEMET
Ceramic
Style/Size
Dielectric Design
1
(pF) SC 29606
Tolerance
(VDC)
Finish2
Rate
(C-Spec)3
© KEMET ts
Electronics CorporationSeries
• P.O. Box 5928 Code
• Greenville,
(864) 963-6300
• www.kemet.com C1054_HV_GOLDMAX_300_C0G
• 4/16/2015
Benefi
KEMET’s 600 Series High Voltage Goldmax conformally coated
capacitance with reference to ambient temperature. Capacitance 1
315 324 335 C = Standard 2 significant digits + J = ±5%
C = 500
R = X7R
5=
T = 100% A = N/A Blank = Bulk
radial through-hole
ceramic capacitors meet
special lead
change
is limited
to ±15%
from
-55°C
to +125°C. 7301 = 12" Reel
316
325 336form factor
number of zeros K = ±10%
B = 630
Multilayer Matte Sn
• Radialrequirements
through-hole
spacing
per
MIL–PRF–49467.
Offered
in
X7R
M = ±20%
D = 1,000
H = SnPb
7303 = 12" Reel
317 326 340
•dielectric,
Conformally
coated
(60/40) exhibit low ESR
7293 =atAmmo
318
346
F = 1,500
these327
capacitors
feature a 125°C maximum operating
These
devices offer low leakage current,
high
•temperature
Lead spacing
per
320 and
328
350
G = 2,000 and find conventional use as snubbers orPack
areMIL–PRF–49467
considered “temperature stable.” The
frequencies
filters in
321+125°C
330 operating
356
Z = 2,500
•Electronics
-55°C to
range X7R dielectric applications
Alliancetemperature
(EIA) characterizes
322Industries
331
H = 3,000 such as switching power supplies and in lighting
•asRoHS
Compliant
a Class
Components of this classification are
ballasts. Their exceptional performance at high frequencies has
323II material.
333
DC ceramic
voltage ratings
of 500
V, 1 KV,suited
1.5 KV,
KV, 2.5and
KV and 3 KV made them a preferred choice of design engineers worldwide. In
fi•1 Additional
xed,
dielectric
capacitors
for2bypass
•decoupling
Capacitance
offeringsorranging
from 1.0discriminating
pF up to 0.1 μF
2
applications
for
frequency
circuits
addition to their use in power supplies, these capacitors are widely
Lead materials:
matte
(Sn)Conformally
with nickel
(Ni) underplate
and steel
core ( “T”
designation).
High Voltage Goldmax,where
600Standard:
Radial,
Coated,
Dielectric,
500related
– 3,000
VDC (Commercial
Grade)
QSeries,
and 100%
stability
oftin
capacitance
characteristics
are
not C0G
used
in industries
to telecommunications,
medical,
military,
Alternative
1: 60% tin
(Sn)/40%
lead change
(Pb) finishinwith
copper-clad with
steel core ( “H”
designation).
Ordering
Information
X7R
exhibits
a
predictable
capacitance
aerospace,
semiconductor
and
test/diagnostic
equipment.
Capacitance Range: 12 pF critical.
to
0.1
μF
•
Temperature
Range:
−55°C
to
+125°C
3
Reeling options:
respect
to time
voltage and
a minimal
change
C-Spec
7301:and
Recommended
for boasts
straight lead
configuration
partin
types.
CC-Spec 7301:
627
C formed (bent) lead
182configuration partJtypes.
D
G
5
T
A
7301
Recommended for
Specification/
Capacitance
Ceramic
Style/Size
Dielectric
Benefi
(pF) SC 29606
Tolerance
(VDC)
© KEMET ts
Electronics CorporationSeries
• P.O. Box 5928 •Code
Greenville,
(864) 963-6300
• www.kemet.com
617
637
1
648 C = Standard Two significant digits + C = ±0.25 pF C = 500
• Radial 622
through-hole
638 657form factor
number of zeros
D = ±0.5 pF D = 1,000
623 640
658
Use 9 for 1.0 – 9.9 pF J = ±5%
F = 1,500
• Conformally
coated
Use 8 for 0.5 – .99 pF K = ±10%
G = 2,000
627 641 667
• Lead spacing
per
MIL–PRF–49467
628 642 668
ex. 2.2 pF = 229
M = ±20%
Z = 2,500
• -55°C to
630+125°C
643 operating temperature
ex.range
0.5 pF = 508
H = 3,000
631 647
• RoHS Compliant
•1 Additional
X7R temperature
dielectric
capacitance stable
tolerance
offerings may be available. Contact KEMET for details.
2
G = C0G
world.
One KEMET
Lead One
Failure
Packaging/Grade
Design
Finish2
Rate
(C-Spec)3 1
C1055_HV_GOLDMAX_300_X7R
• 4/16/2015
5=
Multilayer
T = 100% A = N/A
Matte Sn
H = SnPb
(60/40)
Blank = Bulk
7301 = 12" Reel
7303 = 12" Reel
7293 = Ammo
Pack
Lead materials:
Standard:
100% Radial,
matte tin (Sn)Conformally
with nickel (Ni) underplate
and steelX7R
core ( “T”
designation). 500 – 3,000 VDC (Commercial Grade)
High Voltage Goldmax, 600
Series,
Coated,
Dielectric,
Alternative
1:
60% Tin (Sn)/40%Range:
Lead (Pb)−55°C
finish withtocopper-clad
to 2.9
μF •Information
Temperature
+125°Csteel core ( “H” designation).
Alternative 2: 60% Tin (Sn)/40% Lead (Pb) finish with 100% copper core (available with “H” designation code with C-Spec). Contact KEMET for C-Spec details.
Reeling options:
CC-Spec 7301:
627
C straight lead confi
224guration part types.
K
C
R
5
T
A
7301
Recommended for
C-Spec 7301: Recommended
for
formed
(bent)
lead
confi
guration
part
types.
Specification/
Capacitance
Lead
Ceramic
Style/Size
Dielectric
Design
3
world. One
KEMET
Series
Code (pF)
Tolerance1
(VDC)
Finish2 One
Rate
(C-Spec)
• P.O. Box 25928
• Greenville,
• www.kemet.com
• 4/16/2015
617 637 Corporation
648 C = Standard
signifi
cant digits +SCJ29606
= ±5%(864) 963-6300
C = 500
R = X7R C1056_HV_GOLDMAX_600_C0G
5=
T = 100% A = N/A Blank
= Bulk 1
3
622
623
627
628
630
631
638
640
641
642
643
647
657
658
667
668
number of zeros
K = ±10%
D = 1,000
M = ±20%
F = 1,500
Z = +80%, -20% G = 2,000
Z = 2,500
H = 3,000
Multilayer
Matte Sn
H = SnPb
(60/40)
7301 = 12" Reel
7303 = 12" Reel
7293 = Ammo
Pack
Lead materials:
Alternative 1: 60% Tin (Sn)/40% Lead (Pb) finish with copper-clad steel core ( “H” designation).
Alternative 2: 60% Tin (Sn)/40% Lead (Pb) finish with 100% copper core (available with “H” designation code with C-Spec). Contact KEMET for C-Spec details.
3
Reeling options:
1
2
51
Ceramic Capacitors
Through-Hole
Through-Hole Ceramic
Ceramic Capacitors
Capacitors
Through-Hole
MIL–PRF–123, BP and BX Dielectric, Molded Radial,
50 and 100 VDC
High Temperature (> 150ºC) (cont.)
Overview
HV Series, C0G and X7R,
Radial Conformally Coated, 500 – 10,000 VDC
Overview
10
HV23
N
102
K
N
M
Rated Voltage
(VDC)
Style/Size
Dielectric
Capacitance
Code (pF)
Capacitance
Tolerance
Lead Finish
Group A Screening
05 = 500
HV20 – HV36
Through-Hole
Ceramic Capacitors
10 = 1,000
20 = 2,000
N = C0G (NP0)
B = X7R
number of zeros
J = ±5%
K = ±10%
M = ±20%
N = Nickel
MIL-PRF-49467
C = Solder Coated
(Subgroup 1) except
Clad Steel (Standard)
Corona
GR900
30 = 3,000 High Reliability, BP and BX Dielectric,
40 = 4,000
Molded
50 = 5,000 Radial, 50 – 200 VDC
75 = 7,500
100 = 10,000
Overview
Aerospace & Defense
MIL–PRF–123, BP & BX Dielectric, Molded Radial, 50 – 100 VDC
Information
Ordering
C
C
052
052
ZZ
Specifi
Specification/
cation/
Ceramic
Ceramic Style/Size
Style/Size
Series
Series
052
ZZ == MIL052
MIL062
PRF-123
062
PRF-123
512
512
102
102
Capacitance
Capacitance
Code
Code (pF)
(pF)
Two
signifi
Two significant
cant digits
digits ++
number
number of
of zeros
zeros
Use
Use 99 for
for 1.0
1.0 -- 9.9
9.9 pF
pF
ex.
ex. 0.5
0.5 pF
pF == 508
508
ex.
ex. 2.2
2.2 pF
pF == 229
229
Use
Use 88 for
for 0.5
0.5 -- 0.99
0.99 pF
pF
55
K
K
55
G
G
Capacitance
Capacitance Rated
Rated Voltage
Voltage
Dielectric
Design
Dielectric
Design
Tolerance
(VDC)
Tolerance
(VDC)
C
=
±0.25
pF
5
=
50
G
=
BP
(Ultra5
=
C = ±0.25 pF 5 = 50
G = BP (Ultra- 5 = Standard
Standard
D
1=
stable)
D == ±0.5
±0.5 pF
pF
1= 100
100
stable)
FF == ±1%
XX == BX
±1%
BX (Stable)
(Stable)
JJ == ±5%
±5%
K
K == ±10%
±10%
• 4/16/2015
1
A
A
C
C
Lead
Lead Finish
Finish
Failure
Failure Rate
Rate
C
C == Solder
Solder
coated
coated copper
copper
(standard)
(standard)
AA == N/A
N/A
K
K
C
C
MIL–PRF–123
MIL–PRF–123
MIL–PRF–123
M123
M123
Series
Series
M123
M123 == MILMILPRF
PRF
A
A
Specifi
Specification/
cation/
Series
Series
A
A == Indicates
Indicates the
the
latest
latest characteristics
characteristics
of
of the
the part
part in
in the
the
specifi
specification
cation sheet.
sheet.
01
01
Style/Size
Style/Size
01
01 == 052
052
02
02 == 062
062
03
03 == 512
512
B
B
BX
BX
Rated
Rated Voltage
Voltage
Dielectric
Dielectric
(VDC)
(VDC)
BP
BP == G
G (Ultra-stable)
(Ultra-stable) B
B == 50
50
BX
C=
BX == X
X (Stable)
(Stable)
C= 100
100
103
103
Capacitance
Capacitance
Code
Code (pF)
(pF)
Two
Two signifi
significant
cant digits
digits ++
number
number of
of zeros
zeros
Use
Use 99 for
for 1.0
1.0 -- 9.9
9.9 pF
pF
ex.
ex. 0.5
0.5 pF
pF == 508
508
ex.
2.2
pF
=
229
ex. 2.2 pF = 229
Use
Use 88 for
for 0.5
0.5 -- 0.99
0.99 pF
pF
Capacitance
Capacitance
Tolerance
Tolerance
C
C == ±0.25
±0.25 pF
pF
D
D == ±0.5
±0.5 pF
pF
FF == ±1%
±1%
JJ == ±5%
±5%
KK == ±10%
±10%
Lead
Lead Finish
Finish
C
C == Solder
Solder coated
coated
copper
copper
GR900 High Reliability, BP & BX Dielectric, Molded Radial, 50 – 200 VDC
C
052
B
223
K
1
X
5
Specification/
Capacitance
Dielectric
Design
Ceramic Electronics
Style/Size
©
Greenville,
29606
Series •• P.O.
Code••(pF)
(VDC)•• www.kemet.com
© KEMET
KEMET Electronics Corporation
Corporation
P.O. Box
Box 5928
5928
Greenville, SC
SCTolerance
29606 (864)
(864) 963-6300
963-6300
www.kemet.com
052
B = Leaded Two significant digits + C = ±0.25 pF 1 = 100
G = C0G (CG, 5 = Standard
062
devices
number of zeros
D = ±0.5 pF
2 = 200
BP)
512
Use 9 for 1.0 - 9.9 pF F = ±1%
5 = 50
X = X7R (BX)
ex. 0.5 pF = 508
G = ±2%
ex. 2.2 pF = 229
J = ±5%
Use 8 for 0.5 - 0.99 pF K = ±10%
M = ±20%
C
A
Lead Finish
Failure Rate
•• 4/16/2015
4/16/2015 11
A = N/A
One
One world.
world. One
One KEMET
KEMET
C = Solder
coated copper
(standard)
52
• 4/16/2015
1
Ceramic Capacitors
Through-Hole
Through-Hole Ceramic Capacitors
HV Series, MIL–PRF–46467 Equivalent, BP BR and BZ,
Aerospace & Defense
500 – 5,000 VDC
MIL-PRF-20, CG, Molded Axial & Radial, 50 – 200 VDC
Overview
C
052
G
102
J
1
G
5
C
A
Ceramic
Style/Size
Specification
Capacitance
Code (pF)
Capacitance
Tolerance
Rated Voltage
(VDC)
Dielectric
Design
Lead Finish
Failure Rate
C052 – C522
(Radial)
C114 – C222
(Axial)
G – MILPRF-20
Through-Hole Ceramic Capacitors
2 significant C = ±0.25 pF
digits + number D = ±0.5 pF
of zeros
F = ±1%
G = ±2%
J = ±5%
K = ±10%
1 = 100
2 = 200
5 = 50
G = C0G, CG
5 = Standard C = 60/40 Tin/ A = N/A
Lead (SnPb) M = 1.0%
P = 0.1%
R = 0.01%
S = 0.001%
HS Series High Voltage Space Quality, C0G & X7R,
Radial
MIL–C–11015/MIL–PRF–39014, BX & BR, Molded Axial & Radial, 50 – 200 VDC
Ordering
Capacitance Range: Axial: 10
pF to 3.3Information
μF, Radial: 10 pF to 0.1 μF • Temperature Range: −55°C to +125°C
Overview
C
052
K
102
K
2
X
Dielectric
Ceramic
Style/Size
Specification
Code (pF)
Tolerance
(VDC)
C052 – C066
(Radial)
C114 – C222
(Axial)
Military
2 significant K = ±10%
T – MILdigits + number M = ±20%
PRF-39014
of zeros
K–
MIL-C-11015
1 = 100 V
2 = 200 V
5 = 50 V
X = BX (X7R)
R = BR
5
C
Design
A
Lead Finish
• 4/16/2015
1
Failure Rate
5 = Multilayer C = 60/40 Tin/ A = N/A
Lead (SnPb) M = 1.0%
P = 0.1%
R = 0.01%
S = 0.001%
HV Series, MIL–PRF–49467 Equivalent, BP BR & BZ, 500 – 5,000 VDC
10
HV60
R
102
05 = 500
06 = 600
10 = 1,000
20 = 2,000
30 = 3,000
40 = 4,000
50 = 5,000
HV60 – HV69
P = BP C0G (NP0)
R = BR (X7R)
Z = BZ (X7R)
number of zeros
K
Capacitance
Rated Voltage
Style/Size
Dielectric
Code (pF)
(VDC)
C
Capacitance
Tolerance
J = ±5%
K = ±10%
M = ±20%
• 4/16/2015
Grade/
Test Level
1
C = CSAM
HS Series High Voltage Space Quality, C0G & X7R, Radial, 500 – 10,000 VDC
to 5.6 µF • Information
10
HS24
B
103
K
Capacitance
Capacitance
Rated Voltage
Style/Size
Dielectric
Code (pF)
Tolerance
(VDC)
05 = 500
10 = 1,000
20 = 2,000
30 = 3,000
40 = 4,000
50 = 5,000
75 = 7,500
100 = 10,000
HS20 – HS36
B = X7R
N = BP C0G (NP0)
number of zeros
J = ±5%
K = ±10%
M = ±20%
P = 0/+100%
Z = -20%/+80%
C
Grade/
Test Level
C = CSAM
F
• 4/16/2015
Lead Finish
1
INERT LIQUID
(BURN-IN)
Standard for > 2kV;
Add “F” if required
for 500 V or 1 kV
parts
53
• 4/16/2015
1
• Axial through-hole
form factor
Technology
and are designed
to meet the needs of critical, high
• Non-encapsulated
reliability
and higher temperature applications. C3 Technology
design
•Axial
Proprietary
and lead
robust
C3 Technology
features
a unique
attach
confi
guration
with direct internal
Through-Hole
Multilayer
Ceramic
Capacitors
•connection
-55°C to +125°C
operating
temperature
range(MLCC)
to the Multilayer Ceramic3 Capacitor
• DC voltage
ratings
50 V,guration
100 V and
200 V superior “pull
electrode
system.
Thisofconfi
promotes
• Capacitance
offerings
ranging coeffi
from cient
10 pFofuplinear
to 0.1expansion
μF
away”
performance
and uniform
tolerances
of ±5%,
±10%
and ±20%
characteristics
at elevated
temperatures
when
compared
to
(EIA) characterizes C0G dielectric as a Class I material.
Components of this classification are temperature compensating
and are suited for resonant circuit applications or those where
Q and stability of capacitance characteristics are required. C0G
and boasts a negligible change in capacitance with reference to
ambient temperature. Capacitance change is limited to ±30 ppm/
ºC from -55°C to +125°C.
Ceramic Capacitors
SRA Series, Axial, C Technology, X7R Dielectric,
conventional through-hole technologies. Design details are
Aerospace & Defense
outlined in(cont.)
U.S. Patent Number 4931899.
Through-Hole
Overview
SCA Series, Axial, C3 Technology, C0G Dielectric, 50 – 200 VDC (Commercial Grade)
Information
KEMET’s
Series axial through-hole
ceramic
capacitors in
to 0.1 μFSRA
• Temperature
Range: −55°C
to +125°C
X7R dielectric features a 125°C maximum operating temperature
Benefi
ts feature proprietary Ceramic Cased Capacitor (C3) and is considered “temperature stable.” The Electronics Industries
X7R dielectric
S and areCdesigned toAmeet the 69
B high
104
J
W
Technology
needs of critical,
Alliance (EIA) characterizes
X7R dielectricSas a Class II material.
• Specifi
Radialcation/
through-hole
form factor
Leadapplications. C3Rated
Voltage
Capacitance
Capacitance
Screening
2
reliability
and higher
temperature
Components
of this classifi
cation
fixed,
ceramicPackaging/Grade
dielectric
Dielectric
Style/Size Technology
Lead
Finishare
Series
Configuration
(VDC)
Code (pF)
Tolerance1
Option
(C-Spec)
Radial
Through
Hole
Multilayer
Ceramic
Capacitors
•features
Non-encapsulated
a unique lead attach configuration with direct internal
capacitors suited for bypass and decoupling applications or
S=Standard & robust
C = C0GC3 Technology
A = Axial 3design
16
B = 50
W = SnPb
S = Standard
Blank = Tray
•connection
Proprietary
to the Multilayer Ceramic Capacitor
foroffrequency
circuits where
Q and
25 (MLCC)
D = 100
+ number
zeros K =discriminating
±10%
(60/40)
A = Group
A stability of
• 0.200" and
0.400"
lead
spacing
electrode
system.
This
confi
guration promotes
X7R exhibits a
39 superior
F = 200“pull
Usecapacitance
9 for
Mcharacteristics
= ±20%
G = are
Au not critical.
(MIL–PRF–20)
• -55°C
to +125°C operating
temperature
range
9.9 pF
away”
performance
and uniform
coefficient50
of linear expansion 1.0 –predictable
change in capacitance with respect to time and voltage
69
Use 8 for
• DC voltage ratings
of 50 temperatures
V, 100 V and 200
characteristics
at elevated
whenV compared to
and
boasts
a minimal change in capacitance with reference to
0.5 – .99 pF
• Capacitance
offerings ranging
from 10Design
pF up todetails
0.18 μF
conventional
through-hole
technologies.
are
ex. 2.2ambient
pF = 229 temperature. Capacitance change is limited to ±15% from
• Available
capacitance
tolerances
of ±5%, ±10% and ±20% ex. 0.5-55°C
pF = 508
outlined
in U.S.
Patent Number
4931899.
to +125°C.
SRR Series, Radial, C Technology, X7R Dielectric,
Overview
1
KEMET’s
SRR Series radial through-hole ceramic capacitors in
X7R dielectric features a 125°C maximum operating temperature
Lead materials:
3
3X7R Standard:
)
dielectric
feature
proprietary
Ceramic
Cased
Capacitor
(C
and is considered
“temperature stable.” The Electronics Industries
60%
tin
(Sn)/40%
lead
(Pb)
fi
nish
with
100%
copper
core
(
“C”
designation).
SCR Series, Radial, C Benefi
Technology,
C0G Dielectric, 50 – 200 VDC (Commercial
Grade)
ts and
Alternative
leadare
materials
and fito
nishes
may
beneeds
available.
Contact KEMET
for details.
Technology
designed
meet
the
of
critical,
high
Alliance
(EIA)
characterizes
X7R dielectric as a Class II material.
reliability and higher temperature applications. C3 Technology
Components of this classification are fixed, ceramic dielectric
• Axial through-hole form factor
world. One KEMET
features
unique lead
attach confi
capacitors suited for
decouplingOne
or
S aElectronics
CCorporation
R guration
09with directDinternal
184
J bypass and
WC1047_C0G_AXIAL_SCA
Sapplications
•© KEMET
Non-encapsulated
• P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
• 4/16/2015
1
connection to the Multilayer
Ceramic
Capacitor
(MLCC)
for
frequency
discriminating
circuits
where
Q
and
stability
of
design Rated Voltage Capacitance Code Capacitance Lead Finish2 Screening Packaging/Grade
• Specifi
Proprietary
cation/ & robust C3 Technology
Lead
Dielectric
Style/Size
electrode
This confi
guration
superior “pull
capacitance characteristics
are not critical.Option
X7R exhibits(C-Spec)
a
Seriestosystem.
Confi
guration promotes
(pF)
Tolerance1
• -55°C
+125°C operating
temperature
range (VDC)
away”
performance
and
uniform
coeffi
cient
of
linear
expansion
predictable
change
in
capacitance
with
respect
to
time
and
C = C0G
05 V B = 50
2 significant digits + J = ±5%
W = SnPb
S = Standard
Blank =voltage
Tray
• S=Standard
DC voltage ratings
of 50 RV,=Radial
100 V and 200
characteristics at elevated temperatures when
compared
and
boasts a Kminimal
in capacitance
with
06
D = 100 to
number
of zeros
= ±10% change
(60/40)
A = Group
A reference to
• Capacitance offerings ranging from 1,000
pF
up
to
5.6
μF
07
F = 200 are Use 9 forambient
1.0 – 9.9 pF
M = ±20% Capacitance
G = Au
(MIL–PRF–20)
conventional through-hole technologies. Design
details
temperature.
change
is limited to ±15% from
• Available capacitance tolerances of ±5%,
08 ±10% and ±20%Use 8 for 0.5 – .99 pF
outlined in U.S Patent Number 4931899. 09
-55°C
to
+125°C.
ex. 2.2 pF = 229
• Temperature stable dielectric
2
ex. 0.5 pF = 508
1• SnPb-coated lead finish (60/40)
2
Benefi
ts lead finish option available upon request (RoHS)
materials:
• Lead
Gold-plated
Standard: 60% tin
(Sn)/40%
lead (Pb) finish50
with–100%
core (Commercial
( “C” designation).
SRA Series, Axial, C3 Technology,
X7R
Dielectric,
200copper
VDC
Grade)
lead materials
finishes may be available. Contact KEMET for details.
formandfactor
Capacitance Range: 1,000 •Ordering
pFRadial
toAlternative
5.6through-hole
μFInformation
• Temperature
• Non-encapsulated
design
• Proprietary
and R
robust C3 Technology
S
A
69
B
475
J
W C1060_C0G_RADIAL_SCR
S
• 4/16/2015
1
• 0.200" and 0.400" lead spacing
Specification/
Lead
Rated Voltage Capacitance Capacitance
Screening
Packaging/Grade
2
Dielectric
Style/Size
Lead Finish
• -55°C
range
Seriesto +125°C operating
Confitemperature
guration
(VDC)
Code (pF)
Tolerance1
Option
(C-Spec)
• S=Standard
DC voltage ratings
of
50
V,
100
V
and
200
V
R = X7R
A = Axial
16
B = 50
2 significant
J = ±5%
W = SnPb
S = Standard
Blank = Tray
• Capacitance offerings ranging from 680 25
pF up toD4.7
μF
= 100
digits +
K = ±10%
(60/40)
A = Group A
= 200
number of
M = ±20%
G = Au
(MIL–PRF–39014)
• Available capacitance tolerances of ±5%,39±10%Fand
±20%
50
zeros
• Temperature stable dielectric
69
1• SnPb-coated lead finish (60/40)
materials: lead finish option available upon request (RoHS)
•2 Lead
Gold-plated
Standard: 60% tin X7R
(Sn)/40%Dielectric,
lead (Pb) finish with
copperVDC
core ( “C”
designation).
SRR Series, Radial, C3 Technology,
50100%
– 200
(Commercial
Grade)
lead
materials and fiRange:
nishes may−55°C
be available.
to Alternative
Temperature
to +125°C
S ElectronicsRCorporation •RP.O. Box 592809• Greenville, SC
D 29606 (864) 963-6300
475
J
© KEMET
• www.kemet.com
Specification/
Lead
Dielectric
Series
Configuration
S=Standard
1
2
R = X7R
R =Radial
Rated Voltage
Style/Size
(VDC)
05
06
07
08
09
B = 50 V
D = 100 V
F = 200 V
Capacitance
Code (pF)
+ number of
zeros
1
Capacitance
Lead Finish2
Tolerance1
Packaging/
Screening Option
Grade (C-Spec)
J = ±5%
K = ±10%
M = ±20%
S = Standard
A = Group A
(MIL–PRF–39014)
Lead materials:
54
W C1048_X7R_AXIAL_SRA
S
• 4/16/2015
W = SnPb
(60/40)
G = Au
Blank = Tray
C1061_X7R_RADIAL_SRR • 4/16/2015
1
Safety Certifi
ed Capacitors
are classifi
as either X and/or Y
Radial
Through-Hole
Ceramic
Disc ed
Capacitors
Ceramic Capacitors
capacitors. Class X capacitors are primarily used in line-to line
Disc
Safety
Standard
900
(across-the-line)
applications.Recognized,
In this application there
is no Series, Radial Disc,
danger
of
electric
shock
to
humans
should
the
capacitor
fail, but
Encapsulated, AC Type, X1 440 VAC/Y2
300 VAC (Industrial Grade)
could result in a risk of fire. The class Y capacitor is primarily
used in line-to-ground (line by-pass) applications. In this application, failure of the capacitor could lead to danger of electric
Overview
shock.
Safety
KEMET’s 900 Series encapsulated radial through-hole ceramic
With a working voltage of 440 VAC in line-to-line (Class X) and
Safety Standard Recognized,
900 Series,
Disc,forEncapsulated,
AC Type,
400 VAC/Y2
250Y)VAC
(Industrial
Grade)
disc capacitors
are specifiRadial
cally designed
interference300 VACX1
in line-to-ground
(Class
applications,
these safety
Ordering
Information
line filtering applications.
Having to
internationally
capacitors meet the impulse test criteria outlined in IEC Standard
Capacitance Range: 2 pF tosuppression
10,000 pFAC
• Temperature
Range: −40°C
+125°C
recognized safety certifications, these capacitors are well-suited
60384. Meeting subclass X1 and Y2 requirements, these devices
C9
8 require keeping
1
U
103
M
Y ed to withstand
V
DimpulsesAup to 4 A
for
applications
that
potentially
disruptive
or
are certifi
KV (X1) and7317
5 KV (Y2)
Radial Through-Hole Ceramic Disc Capacitors
Ceramic line Body
Lead
Capacitance
Capacitance respectively.
Rated
Dielectric/
Lead
Failure
Packaging
damaging
transients and
EMI outSpec.
of susceptible
equipment.
These encapsulated
devices
also
meet
the
flame test
Design
Series
Spacing1,2,4
Code (pF)
Voltage Temp.
Char. in UL Standard
Config.1,3,494V–0.
Rate
(C-Spec)2,3,4
They
are alsoDiameter
an ideal solution
in situations where
there isTolerance
a
requirements
outlined
C9to
= suppress
0 = 7.0 mm
5 = 5.0 mm at Uthe
= source.
2 significant C = ±0.25 pF Y = X1
N = CH
D=
A=
A = 7317 = Ammo Pack
need
line disturbances
Safety Standard Recognized, 900 Series, Radial Disc,
Encapsulated,
Type,
760
VAC
Grade)
Ceramic 1 = 8.0 mm 7 AS
= 7.5 mm
Safety X1digits
+ VAC/Y1
D = ±0.5 pF 500
400 VAC
(NP0)(Industrial
Disc Straight
N/A WL30 = Bulk/3.0 mm
900
2 = 9.0 mm
1 = 10.0 mm
number of
J = ±5%
/Y2 250
S = SL
B = Vertical
Lead length
Safety
Capacitors
are classified as either
X and/or
SeriesCertifi3ed
= 10.0
mm
zeroes
K =Y
±10%
VAC
Y = Y5P
Kink
WL35 = Bulk/3.5 mm
4 = 11.0Xmm
Use 9inforline-to-line
M = ±20%
W = Y5U
C=
Lead length
capacitors.
Class
capacitors
are
primarily
used
Overview6 = 13.0 mm
Outside
WL40 = Bulk/4.0 mm
1.0 V = Y5V
(across-the-line)
applications.
In
this
application
there
is
no
Kink
Lead length
8 = 15.0 mm
9.9 pF
danger of 900
electric
shock
to humansradial
shouldthrough-hole
the
capacitor
fail, but
KEMET’s
series
encapsulated
With a working voltage of 760 DVAC
in line-to-lineWL45
(Class
X)and mm
e.g.,
2.2 pF ceramic
= Inside
= Bulk/4.5
= 229
KinkY) applications,Lead
length
couldcapacitors
result in aare
riskspecifi
of fire.cally
Thedesigned
class Y capacitor
is primarily
disc
for interference500 VAC in line-to-ground (Class
these
safety
= Bulk/5.0 mm
used in line-to-ground
(line by-pass)
applications.
In this apsuppression
AC line filtering
applications.
Having internationally
capacitors meet the impulse test criteria outlinedWL50
in IEC
Standard
Lead length
plication, failure
the capacitor
could capacitors
lead to danger
of electric
recognized
safetyofcertifi
cations, these
are well-suited
60384. Meeting subclass X1 and Y1 requirements,
these
devices
WL20 = Bulk/20
mm
shock.
Lead
length
for
applications that require keeping potentially disruptive or
are certified to withstand impulses up to 4 KV (X1)
and
8 KV (Y1)
damaging
line transients and EMI out of susceptible equipment.
respectively. These encapsulated devices also meet the flame test
1
Due to a high risk of arcing, "Inside Kink" lead configuration cannot be combined with the 5 mm lead spacing option. The "Inside Kink" option is only available on
They
are with
alsolead
an spacing
ideal solution
when
to suppress line
requirements outlined in UL Standard 94V-0.
capacitors
of 7.5 mm
or 10 needing
mm.
2
disturbances
the source.
Capacitor900
bodyatdiameter
will Radial
limit available
lead spacing
and packaging options.
"Dimensions"
andVAC/Y2
"Product Ordering
Ratings" sections
of this
Series,
Disc,
Encapsulated,
AC See
Type,
X1 440
300 Codes
VACand(Industrial
Grade)
document to determine
availability.
10,000 pFInformation
• Temperature
3
"Vertical
Kink",ed"Outside
Kink" and
leadeither
configurations
Safety
Certifi
Capacitors
are"Inside
classifiKink"
ed as
X and/orcannot be combined with the bulk/20 mm lead length option (WL20). 20 mm lead length is
only
available
on
capacitors
with
straight
leads
(lead
confi
guration
ordering code "A"). For nonstandard lead length inquiries, please contact KEMET.
Y4 capacitors.
Class
used
C9
7 X capacitors
1 are primarily
U
472 in line-to M
Z
W
D
A
A
7317
Bulk packaging lead length availability is dependent upon "Lead Configuration" and "Lead Spacing." See "Dimensions" section of this document to verify
line
(across-the-line)
applications.
In this application
thereCapacitance
is
Lead
Capacitance
Rated
Dielectric/
Ceramic
Body
Lead
Failure
Packaging
availability of a specific lead length option. For
nonstandard lead length inquiries, please contact KEMET. Design
Spec.
1,3
no Series
danger of Diameter
electric shock
to humans
shouldCode
the capacitor
Config.2,3 Rate
(pF)
Tolerance
Voltage Temp. Char.
Spacing
(C-Spec)2,3
fail,C9
but= could0 =result
in
a
risk
of
fi
re.
The
class
Y
capacitor
is
7.0 mm 7 = 7.5 mm
U=
2 significant C = ±0.25 pF Z = X1
N = CH
D=
A=
A = 7317 = Ammo Pack
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1064_X1_400 VAC_Y2_250 VAC • 4/16/2015
1
Ceramic used
1 =in
8.0line-to-ground
mm 1 = 10.0 (line
mm by-pass)
Safety
digits +
D =In±0.5 pF 440 VAC (NP0)
Disc Straight
N/A WL30 = Bulk/3.0 mm
primarily
applications.
900
2
=
9.0
mm
number
of
J
=
±5%
/Y2
300
S
=
SL
Lead
length
B
=
Vertical
this application, failure of the capacitor could lead to danger of
Series
3 = 10.0 mm
zeroes
K = ±10%
VAC
Y = Y5P
Kink
WL35 = Bulk/3.5 mm
electric shock.
4 = 11.0 mm
Use 9 for
M = ±20%
W = Y5U
C=
Lead length
6 = 13.0 mm
8 = 15.0 mm
1.0 9.9 pF
e.g., 2.2 pF
= 229
V = Y5V
Outside
Kink
D = Inside
Kink
WL40 = Bulk/4.0 mm
Lead length
WL45 = Bulk/4.5 mm
Lead length
WL50 = Bulk/5.0 mm
Lead length
WL20 = Bulk/20 mm
Lead length
1
Capacitor body diameter will limit available lead spacing and packaging options. See "Dimensions" and "Product Ordering Codes and Ratings" sections of this
document to determine availability.
2
"Vertical Kink","Outside Kink" and "Inside Kink" lead configurations cannot be combined with the bulk/20 mm lead length option (WL20). 20 mm lead length is
only
available on
capacitors with straight leads (lead configuration ordering code "A"). For nonstandard lead length inquiries, please contact KEMET.
Information
2,200 Ordering
pF
• Temperature
3
Bulk packaging lead length availability is dependent upon "Lead Configuration" and "Lead Spacing." See "Dimensions" section of this document to verify
availability of a specific lead length option. For nonstandard lead length inquiries, please contact KEMET.
Safety Standard Recognized, 900 Series, Radial Disc, Encapsulated, AS Type, X1 760 VAC/Y1 500 VAC (Industrial Grade)
Capacitance Range:
C9
6
1
U
222
M
W
W
D
A
A
7317
Ceramic
Body
Lead
Rated
Dielectric/
Lead
Failure
Packaging
© KEMET Electronics Corporation • P.O.
BoxSpec.
5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.comDesign
C1065_X1_4401VAC_Y2_300 VAC • 4/16/2015
Series
Diameter
Spacing1
Code (pF)
Tolerance
Voltage Temp. Char.
Config.
Rate
(C-Spec)1
C9 =
Ceramic
900
Series
6 = 13.0 mm 1 = 10.0 mm
U=
Safety
2 significant
digits +
number of
zeroes
M = ±20%
W = X1
760 VAC
/Y1 500
VAC
W = Y5U
D=
Disc
A=
A=
Straight
N/A
B = Vertical
Kink
C=
Outside
Kink
1
7317 = Ammo Pack
WL35 = Bulk/3.5 mm
Lead length
WL40 = Bulk/4.0 mm
Lead length
WL45 = Bulk/4.5 mm
Lead length
WL20 = Bulk/20 mm
Lead length
1
"Vertical Kink" and "Outside Kink" lead configurations cannot be combined with the bulk/20 mm lead length option (WL20). 20 mm lead length is only available on
capacitors ordered with straight leads (lead configuration ordering code "A"). For nonstandard lead length inquiries, please contact KEMET.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1066_X1_760 VAC_Y1_500 VAC • 4/16/2015
1
55
no danger of electric shock to humans should the capacitor
Safety
Standard Recognized, 900 Series, Radial Disc,
fail, but could result in a risk of fire. The class Y capacitor is
primarily used in line-to-ground
by-pass)
In
Encapsulated,
AH (line
Type,
X1applications.
400 VAC/Y1
400 VAC (Industrial Grade)
Ceramic Capacitors
this application, failure of the capacitor could lead to danger of
electric shock.
Disc
Overview
KEMET’s 900 series encapsulated radial through-hole ceramic
With a working voltage of 400 VAC in line-to-line (Class X)and
disc capacitors are specifically designed for interference400 VAC in line-to-ground (Class Y) applications, these safety
suppression AC line filtering applications. Having internationally
capacitors meet the impulse test criteria outlined in IEC Standard
900
Series,
Radialthese
Disc,
Encapsulated,
AH Type,
X1 400 VAC/Y1 250 VAC (Industrial Grade)
recognized
safety
certifi
cations,
capacitors
are
well-suited
60384. Meeting subclass X1 and Y1 requirements, these devices
Ordering
Capacitance Range: 2.0 pFfor
to applications
4,700 pFInformation
• that
Temperature
Range:
−25°C
to
+125°C
require keeping potentially disruptive or
are certified to withstand impulses up to 4 KV (X1) and 8 KV (Y1)
damaging line transients and EMI out of susceptible equipment.
respectively. These encapsulated devices also meet the flame test
C9
1
1
U
620
J
U
S
D
A
A
7317
They
are also
an
ideal solution when needing to suppress line
requirements outlined in UL Standard 94V-0.
Ceramic
Disc
Capacitors
Ceramic
Body
Lead
Rated
Dielectric/
Lead
Failure
Packaging
Spec.
Design
disturbances at the source.
1
2
1,2
Safety (cont.)
Series
Diameter
(pF)
Tolerance
Voltage Temp. Char.
ERO610
Series,Spacing
Radial ACCode
Type,
X1
440 VAC/Y2
250 VAC Config.
C9 =
0 = 7.0 mm
1 = 10.0 mm
U=
2 significant
C = ±0.25pF
Safety
Certifi1ed
Capacitors
are classifi
ed as either
Ceramic
= 8.0
mm
Safety
digits X+ and/or
D = ±0.5pF
Y capacitors.
X capacitors are primarilynumber
used in
900
2 =Class
9.0 mm
of line-to
J = ±5%
Series
3 = 10.0 mmapplications. In this application
zeroes thereK is
= ±10%
line
(across-the-line)
Overview
4 = 11.0 mm
Use 9 for
M = ±10%
no danger of5 electric
shock
to
humans
should
the
capacitor
= 12.0 mm
1.0 fail, but could
in a risk of fire. The class Y9.9pF
capacitor is
7 =result
14.0 mm
2.2pF
primarily used in line-to-ground (line by-pass)e.g.,
applications.
In
= 229
this application, failure of the capacitor could lead
to danger of
electric shock.
U = X1
400 VAC
/Y1 250
VAC
N = CH
(NP0)
S = SL
Y = Y5P
W = Y5U
V = Y5V
D=
Disc
A=
Straight
B=
Vertical
Kink
C=
Outside
Kink
Rate
A=
N/A
(C-Spec)
7317 = Ammo Pack
WL30 = Bulk/3.0 mm
Lead length
WL35 = Bulk/3.5 mm
Lead length
WL40 = Bulk/4.0 mm
Lead length
WL45 = Bulk/4.5 mm
Lead length
WL50 = Bulk/5.0 mm
Lead length
WL20 = Bulk/20 mm
Lead length
1
2
Bulk packaging lead length availability is dependent upon "Lead Configuration." See "Dimensions" section of this document to verify availability of a specific lead
length option. For
nonstandard lead length inquiries, please contact KEMET.
Ordering
Information
Safety Standard Recognized, 900 Series, Radial Disc, Encapsulated, AH Type, X1 400 VAC/Y1 400 VAC (Industrial Grade)
Capacitance Range: 2.0 pF to 4,700 pF • Temperature Range: −25°C to +125°C
© KEMET
C1067_X1_400
VAC • 7317
4/16/2015
C9 Electronics
3 Corporation1• P.O. Box 5928
U • Greenville,
101 SC 29606J(864) 963-6300
V • www.kemet.com
S
D
A VAC_Y1_250
A
Ceramic
Series
C9 =
Ceramic
900
Series
Body
Diameter
Lead
Spacing1
Spec.
0 = 7.0 mm 1 = 10.0 mm U =
1 = 8.0 mm
Safety
2 = 9.0 mm
3 = 10.0 mm
4 = 11.0 mm
5 = 12.0 mm
6 = 13.0 mm
7 = 14.0 mm
Capacitance
Code (pF)
Capacitance
Tolerance
Rated
Voltage
2 significant
digits +
number of
zeroes
Use 9 for
1.0 9.9 pF
e.g., 2.2 pF
= 229
C = ±0.25 pF V = X1
D = ±0.5 pF 400 VAC
J = ±5%
/Y1 400
K = ±10%
VAC
M = ±20%
Dielectric/
Design
Temp. Char.
N = CH
(NP0)
S = SL
Y = Y5P
W = Y5U
V = Y5V
D=
Disc
Lead
Config.2
Failure
Rate
A=
A=
Straight
N/A
B = Vertical
Kink
C=
Outside
Kink
1
Packaging
(C-Spec)1,2
7317 = Ammo Pack
WL30 = Bulk/3.0 mm
Lead length
WL35 = Bulk/3.5 mm
Lead length
WL40 = Bulk/4.0 mm
Lead length
WL45 = Bulk/4.5 mm
Lead length
WL50 = Bulk/5.0 mm
Lead length
WL20 = Bulk/20 mm
Lead length
1
2
Bulk packaging lead length availability is dependent upon "Lead Configuration." See "Dimensions" section of this document to verify availability of a specific lead
Ordering
Information
length
For
nonstandard
lead length inquiries,
contact
pF
tooption.
12,000
pF
• Temperature
Range:please
−40°C
to KEMET.
+125°C
ERO610 Series, Radial AC Type, X1 440 VAC/Y2 250 VAC
Capacitance Range: 1,000
ERO610
R Box 5928 • Greenville,J SC 29606 (864) 963-6300 4250
K VAC_Y1_400 VAC • 4/16/2015
BF0
© KEMET
Electronics Corporation • P.O.
• www.kemet.com C1068_X1_400
1
Lead Configuration
Series
Safety Class/Sub-Class
Lead Spacing
& Packaging
ERO610
R = X1/Y2
J = 5.0 mm
K = 7.5 mm
Digits 2 – 4 indicate the first three
significant figures of capacitance
in pF.
The first digit indicates the total
number of significant figures of
capacitance.
Example: 12,000 pF = 5120
1,800 pF = 4180
150 pF = 3150
K = ±10%
M = ±20%
Please refer to
datasheet
56
• 4/16/2015
1
Ceramic Capacitors
Disc
Safety (cont.)
Ceramic Disc Capacitors
KJN Series, Y5P, Y5U & Y5V Dielectric,
ERK610 Series, RadialY1
AC250/400
Type, X1 VAC/X1
440 VAC/Y2
VAC
440300VAC
ERK610
Overview
R
K
4470
Series
Lead Spacing
ERK610
R = X1/Y2
K = 7.5 mm
in pF.
capacitance.
Example: 12,000 pF = 5120
1,800 pF = 4180
150 pF = 3150
K
CF0
Lead Configuration
& Packaging
K = ±10%
M = ±20%
Please refer to
datasheet
KJY Series, Y5P, Y5U & Y5V Dielectric,
Y2 250 VAC/X1 400 VAC
ERP610 Series, Radial AC Type, X1 760 VAC/Y2 500 VAC
Overview
ERP610
V
H
4470
Series
Lead Spacing
ERP610
V = X1 / Y1
H = 12.5 mm
in pF.
capacitance.
Example: 12,000 pF = 5120
1,800 pF = 4180
150 pF = 3150
• 4/16/2015
EF0
K
K = ±10%
M = ±20%
1
Lead Configuration
& Packaging
Please refer to
datasheet
KJN Series, Y5P, Y5U & Y5V Dielectric, Y1 250/400 VAC/X1 440 VAC
Information
to 4,700 pF
© KEMET
KJN
331 • P.O. Box 5928K• Greenville, SC 29606
Q (864) 963-6300 • www.kemet.com
35
Series
Capacitance
Code (pF)
2 significant
digits + number
of zeros
Capacitance
Tolerance
K = ±10%
M = ±20%
Rated Voltage
Q = 440 VDC/X1,
250 VAC/Y1
Size (mm)
28 = 7
31 = 8
35 = 9
39 = 10
43 = 11
47 = 12
51 = 13
55 = 14
59 = 15
63 = 16
67 = 17
71 = 18
79 = 20
87 = 22
• 4/16/2015
G
F
Lead Spacing
(mm)
F = 10
G = 12.5
1
Temperature Code
A = Y5U or better
B = Y5V
G = Y5P
KJY Series, Y5P, Y5U & Y5V Dielectric, Y2 250 VAC/X1 400 VAC
to 10,000 Information
pF • Temperature Range: −25°C to +125°C
KJY
102
M
R
31
Capacitance
Capacitance
© KEMET
Electronics Corporation • P.O. Box 5928 • Greenville, SC
29606
(864) 963-6300 • www.kemet.com
Rated
Voltage
Size (mm)
Series
Code (pF)
Tolerance
2 significant
digits + number
of zeros
K = ±10%
M = ±20%
R = 400 VAC/X1,
250 VAC/Y2
28 = 7
31 = 8
35 = 9
39 = 10
43 = 11
47 = 12
51 = 13
55 = 14
59 = 15
63 = 16
67 = 17
71 = 18
79 = 20
87 = 22
F One world. OneAKEMET
Lead Spacing
(mm)
F = 10
G = 12.5
• 4/16/2015Code1
Temperature
A = Y5U or better
B = Y5V
G = Y5P
57
Ceramic Capacitors
Disc
KHC Series, SL Dielectric, 1,000 – 2,000 VDC
Commercial Grade
Overview
KHA Series, X7R Dielectric, 1,000 – 2,000 VDC
Information
to 4,700 pF
KHA
152
K
Series
Capacitance
Code (pF)
Capacitance
Tolerance
2 significant
digits + number
of zeros
K = ±10%
M = ±20%
N
Rated Voltage
N = 1,000 VDC
P = 2,000 VDC
35
C
H
Size (mm)
Lead Spacing
(mm)
Temperature Code
28 = 7
31 = 8
35 = 9
39 = 10
43 = 11
47 = 12
51 = 13
55 = 14
59 = 15
63 = 16
67 = 17
71 = 18
79 = 20
87 = 22
C=5
D = 7.5
H = X7R
KHB Series, Y5P Dielectric, 1,000 – 2,000 VDC
to 10,000 Information
pF • Temperature Range: −25°C to +85°C
KHB
122
K
N
31
Capacitance
Capacitance
© KEMET
29606
(864) 963-6300 • www.kemet.com
Rated
Voltage
Size (mm)
Series
Code (pF)
Tolerance
2 significant
digits + number
of zeros
K = ±10%
M = ±20%
N = 1,000 VDC
P = 2,000 VDC
28 = 7
31 = 8
35 = 9
39 = 10
43 = 11
47 = 12
51 = 13
55 = 14
59 = 15
63 = 16
67 = 17
71 = 18
79 = 20
87 = 22
D One world. OneGKEMET
Lead Spacing
(mm)
C=5
D = 7.5
• 4/16/2015Code1
Temperature
G = Y5P
KHC Series, SL Dielectric, 1,000 – 2,000 VDC
to 560 pF • Information
KHC
820
K
N
28
Capacitance
Capacitance
© KEMET
29606
(864) 963-6300 • www.kemet.com
Rated
Voltage
Size (mm)
Series
Code (pF)
Tolerance
2 significant
digits + number
of zeros
K = ±10%
M = ±20%
N = 1,000 VDC
P = 2,000 VDC
28 = 7
31 = 8
35 = 9
39 = 10
43 = 11
47 = 12
51 = 13
55 = 14
59 = 15
63 = 16
67 = 17
71 = 18
79 = 20
87 = 22
D One world. OneCKEMET
Lead Spacing
(mm)
C=5
D = 7.5
• 4/16/2015Code1
Temperature
C = SL
58
• 4/16/2015
1
General Purpose
Film Capacitors
General Purpose
General Purpose
Metallized
Polyester
F611 & F612
5 – 37.5 mm
50 – 1,000 VDC
F622 – 125°C
Halogen Free
5 mm (Stacked)
50 – 630 VDC
R60
10 – 37.5 mm
50 – 1,000 VDC
R66
7.5 mm Lead Spacing
50 – 630 VDC
R82
5 mm Lead Spacing
50 – 400 VDC
RSB – 125°C
5 mm (Stacked)
50 – 630 VDC
A50
Axial
50 – 1,000 VDC
MDK (F683/4/5/7/8)
Dual In-Line
High Current
50 – 630 VDC
Metallized
Polyester
Metallized Paper &
Polyphenylene Sulfide
Double Metallized
Polypropylene
Film/Foil
Polypropylene
Film/Foil
Polypropylene
X1 Class
PHE450 (F450)
PME261 (P561)
F461 – 464
R73
DC Applications
Impregnated Paper
Halogen Free
Radial
F871
F873VDC
250 R73
– 3,000 VAC
400
160 – 2,500
100 ––2,000
PHE450
(F450)VDC
F461– –1,000
464 VDC
Halogen
Free
DC Applications
Halogen Free
Radial
Metallized Polypropylene
250 – 3,000 VAC
160 –SMR
2,500(F211)
VDC
100
–
2,000
VDC
PFR (F411)
R79
R76
330/480/760
VAC
Radial
5 mm Lead Spacing
DC & Pulse Applications
150°C
63 R49
– 1,000 VDC
160R76
– 630 VDC
250
2,000 VDC
PFR–(F411)
50R79
– 400 VDC
Radial
5 mm Lead Spacing
63 – 1,000 VDC
310 VAC/330 VAC
160 – 630 VDC
250 – 2,000 VDC
A72
R75
Axial
160 – 2,000 VDC
100R47
– 2,000 VDC
A72
R75
Axial
160 – 2,000 VDC
440 VAC
100 – 2,000 VDC
R66
R74
7.5 mm Lead Spacing
AC Applications
P278
50 – 630 VDC
250 – 900 VDC
R74
Metallized Impregnated
AC Applications
Paper
250
–
900
VDC
R74 – 125°C
R82
480 VAC
AC Applications
5 mm Lead Spacing
P410
500 – 700 VDC
50 – 400 VDC
R74 – 125°C
Metallized
Impregnated
AC Applications
Paper
500 – 700 VDC
R71
RSB – 125°C
300 VAC
SMPS PFC Applications
5 mm (Stacked)
PME271E (P277)
420 – 1,000 VDC
50 – 630 VDC
R71
SMPS PFC Applications
Paper
420 – 1,000 VDC
A50
A70
300 VAC
Axial
Axial
50 – 1,000 VDC
160 – 630 VDC
PHE844 (F844)
A70
Axial
440/480 VAC
MDK (F683/4/5/7/8)
160 – 630 VDC
Dual In-Line
High Current
PHE845
(F845)
50 – 630 VDC
760 VAC
F611 & F612
5 – 37.5 mm
50 – 1,000
VDC
PME261
(P561)
Impregnated Paper
400 –F622
1,000
VDC
– 125°C
Halogen Free
5 mm(F211)
(Stacked)
SMR
50 – 630Sulfide
VDC
Polyphenylene
150°C
50 – 400R60
VDC
10 – 37.5 mm
50 – 1,000 VDC
Metallized
Polyester
Metallized Paper &
Single Metallized
Polypropylene
Double Metallized
Polypropylene
Film/Foil
Polypropylene
F611 & F612
5 – 37.5 mm
50 – 1,000 VDC
PME261 (P561)
Impregnated Paper
400 – 1,000 VDC
F461 – 464
Halogen Free
160 – 2,500 VDC
PHE450 (F450)
DC Applications
250 – 3,000 VAC
R73
Radial
100 – 2,000 VDC
R79
5 mm Lead Spacing
160 – 630 VDC
R76
250 – 2,000 VDC
PFR (F411)
Radial
63 – 1,000 VDC
THROUGH-HOLE FILM CAPACITORS
SMR (F211)
F622 – 125°C
THROUGH-HOLE FILM CAPACITORS Halogen Free
150°C
5 mm (Stacked)
50 – 400 VDC
50 – 630 VDC
Pulse & AC
R60
Pulse & AC
Safety/EMI
10 – 37.5 mm
Single Metallized
Polypropylene
Single Metallized
Double Metallized
Polypropylene
Polypropylene
Metallized Paper &
50 – 1,000 VDC
X1 Class
X2 Class
Axial
Axial
C4C
Axial Round
850 – 3,000 VDC/
450 – 750 VAC
C4DC
GTO Snubbing
850 – 1,400 VDC/
500 – 700 VAC
C4DR
GTO Clamping
400 – 3,000 VDC/
160 – 1,500 VAC
C4G
Axial Round
250 – 850 VDC/
160 – 450 VAC
Radial
C4C
Axial Round
850C4AE
– 3,000 VDC/
750 VAC
2 450
or 4–Leads
DC C4DC
Link
450 GTO
– 1,100
VDC
Snubbing
850C4AS
– 1,400 VDC/
700 VAC
2 500
or 4 –Leads
850 – 3,000
VDC/
C4DR
500GTO
– 750
VAC
Clamping
400C4AT
– 3,000 VDC/
1,500 VAC
2160
or 4– Leads
250 – 850
VDC/
C4G
160 Axial
– 450Round
VAC
250
–
850
C4BS VDC/
– 450
VAC
IGBT160
Direct
Mount
850 – 3,000 VDC/
550 – 750 VAC
C4BT
IGBT Direct Mount
400 – 850 VDC/
250 – 450 VAC
Radial
Screw/Faston
Terminal
C4AE
2 or 4 Leads
DC Link
C4DE
450
– 1,100 VDC
Low
Inductance
DC C4AS
Link
400 –21,000
VDC
or 4 Leads
850C44A
– 3,000 VDC/
500 – 750
VAC
General Purpose
& Snubbing
400 – 1,500 VDC/
C4AT
250 – 630
VAC
2 or 4 Leads
250
– 850 VDC/
C44B
160 – 450
VAC
General Purpose
& Snubbing
1,200 – 2,400 VDC/
C4BS
500 – 1,000
VAC
IGBT Direct Mount
850C44H
– 3,000 VDC/
550
– 750
VAC
PFC
& AC
Filter
330 – 440
VAC/
C4BT
700
– 1,000
IGBT
DirectVDC
Mount
400 – 850 VDC/
C44P/C20A
– 450
VAC
PFC250
& AC
Filter
330 – 1,000 VAC/
700 – 2,300 VDC
C44U
DC Link
700 – 1,300 VDC
C93
Filter Applications
400 – 600 VDC
C9T
PFC & AC Filter
415 – 690 VAC
C27
Plastic Case
425F43
– 450 VAC
Integrated Resistor
C87
250 – 630
VDC
General Purpose & Snubbing
Aluminum Case
400 – 1,500 VDC/
PMR205
(P405)
470
VAC
C87
250 – 630 VAC
Integrated Resistor
Aluminum Case
Metallized Impregnated Paper
470 VAC
C44B
General Purpose & Snubbing 125 VAC/250 VDC
1,200 – 2,400 VDC/
P409
500 – 1,000 VAC
Integrated Resistor
C44H
275 VAC
PFC & AC Filter
330 – 440 VAC/
P410
700 – 1,000 VDC Integrated 100 Ω Resistor
C44P/C20A
300 VAC
PFC & AC Filter
330 – 1,000 VAC/
PMZ2035 (P435)
700 – 2,300 VDC Integrated 100 Ω Resistor
Low Inductance
DC Link
400C27
– 1,000 VDC
Plastic Case
425 – 450
VAC
C44A
C44U
DC Link
700 – 1,300 VDC
300 VDC
400 – 3,000 VDC/
160 – 1,500 VAC
Suppression
Radial
Radial
Polyester
(PET)
60
F161
Encapsulated Stacked
50 – 400 VDC
MDC (F153/4/5/7/8)
Dual In-Line
Polyester
Polyethylene
(PET)
Naphthalate
(PEN)
Naphthalate
Metallized
(PEN)
Polyphenylene
Sulfide
LDE
(PPS)
Polyphenylene
Sulfide
(PPS)
Y2 Class
Y2 Class
SMP253 (P101)
LDB
F161
Encapsulated Stacked Unencapsulated Stacked Unencapsulated Stacked Metallized Impregnated
Paper
SMP253
(P101)
50LDE
– 400 VDC
50 LDB
– 1,000 VDC
16 VDC & 50 VDC
250 VAC
Unencapsulated Stacked Unencapsulated Stacked Metallized Impregnated
Paper
50
– 1,000
VDC
16 VDC
& 50(F115)
VDC
MDC
(F153/4/5/7/8)
GMC
250
VAC
SMC
(F125)
Dual In-Line
High(F115)
Current
Size 2220 – 6560
GMC
50 – 400 VDC
SMC
(F125)
50
–
630
VDC
50
–
630
VDC
Y2 Class
Multiple X & Y
C4AE
2 or 4 Leads
DC Link
450 – 1,100 VDC
C4DE
Low Inductance
DC Link
400 – 1,000 VDC
C27
Plastic Case
425 – 450 VAC
C4AS
2 or 4 Leads
850
– 3,000 VDC/
Capacitive
500 – 750 VAC
C44A
C87
Aluminum Case
470 VAC
AC Power Supply
C4AT
2 or 4 Leads
250 – 850 VDC/
160 – 450 VAC
Radial
C4G
C4BS
Axial Round
IGBT Direct Mount
Radial
Radial
250 –F5A
850 VDC/
850 – 3,000 VDC/
F43
160
– 450 VAC
550 –F862
750 VAC
Integrated Resistor
Integrated
Metallized
Varistor
F5APolypropylene
310
VAC
C4BT
F862
250 – 630 VDC
18 – 63 VDC
Integrated
IGBT Direct Mount
Varistor
400 – 850 VDC/
310 VAC
F5B
(P405)
R47
X1
X2
18PMR205
– 63 VDC
250 – 450– VAC
Integrated Suppression Metallized
Integrated Resistor
Polypropylene
Diode
MetallizedF5B
Impregnated Paper
440 VAC
R47
X1
–
X2
18– 63 VDC
125 VAC/250
VDC
Integrated
Suppression
Diode
440 VAC
F5D
R75 2/L
18– 63P409
VDC
Integrated
Integrated Resistor
Ceramic Capacitor
MetallizedF5D
Impregnated Paper
230 VAC / 250 VAC
R75
2/L
63 – 100 VDC
275 VAC
Integrated
Ceramic Capacitor
230 VAC / 250 VAC
PME271E (P277)
P410
63 – 100
VDC
Integrated 100 Ω Resistor
Paper
Metallized Impregnated Paper PME271E (P277)
300 VAC
300 VAC
Paper
PME271M X2 (P276)
PMZ2035 (P435)
300 VAC
Integrated 100 Ω Resistor
Paper
Metallized Impregnated Paper PME271M X2 (P276)
275 VAC
300 VDC
Paper
275 VAC
400 – 1,500 VDC/
250 – 630 VAC
Polyester
(PET)
Polyethylene
Naphthalate
(PEN)
Metallized
Polyphenylene
Sulfide
(PPS)
GMC (F115)
Size 2220 – 6560
50 – 630 VDC
SMC (F125)
50 – 400 VDC
MDS (F173/4/5)
Dual In-Line
High Current
50 – 630 VDC
GPC (F117)
Encapsulated Double
Metallized
63 – 1,000 VDC
SPC (F127)
Encapsulated Double
Metallized
100 – 630 VDC
Me
1,200 – 2,400 VDC/
500 – 1,000 VAC
C44H
PFC & AC Filter
330 – 440 VAC/
700 – 1,000 VDC
C44P/C20A
PFC & AC Filter
330 – 1,000 VAC/
700 – 2,300 VDC
C44U
DC Link
700 – 1,300 VDC
C93
Filter Applications
400 – 600 VDC
C9T
PFC & AC Filter
415 – 690 VAC
Y2 Class
SMP253 (P101)
LDE
LDB
Unencapsulated Stacked Unencapsulated Stacked Metallized Impregnated
Paper
50 – 1,000 VDC
16 VDC & 50 VDC
250 VAC
MDC (F153/4/5/7/8)
Dual In-Line
High Current
50 – 630 VDC
Me
C44B
SURFACE MOUNT FILM CAPACITORS
F161
50 – 400 VDC
SURFACE MOUNT FILM CAPACITORS
SURFACE MOUNT FILMPolyethylene
CAPACITORS Metallized
Y1 Class
A72
Axial
100 – 2,000 VDC
Power Film
C93
Filter Applications
400 – 600 VDC
C9T
PFC & AC Filter
415 – 690 VAC
R75
160 – 2,000 VDC
POWER & APPLICATION OPTIMIZED F
POWER & APPLICATION OPTIMIZED FILM CAPACITORS
C4DC
GTO Snubbing
POWER & APPLICATION OPTIMIZED FILM CAPACITORSHigh Voltage
Low
Voltage
850
– 1,400
VDC/
Motor Run
500
– 700 VAC
Transient
Transient
Power Film
Applications
High
Voltage
Low Voltage
Motor Run
Capacitive
C4DR
Suppression
Suppression
Transient
Transient
GTO Clamping
Power Film
Applications
AC Power
Supply
Suppression
Screw/Faston
Terminal
Radial
Safety/EMI
R66
R74
Multiple X & Y
Y1 Class
Y2
7.5X2
mmClass
Lead Spacing
AC Class
Applications
F871
– F873
F881
50
– 630
VDC
250 –P295
900 VDC
PHZ9004 (9004)
F861
Halogen Free
Metallized
Impregnated
Halogen Free
Paper
P295
F881
300 VAC (3x X2)
310
VAC
PHZ9004
F861
R74
125°C
R82 VAC Metallized Impregnated
330/480/760
500–Free
VAC
300(9004)
VAC
Halogen
Metallized
ACPolypropylene
Applications Metallized Polypropylene
5 mmPolypropylene
Lead Spacing
Paper
Metallized
300 VAC (3x X2)
PME295
(P295)
PMZ2074 (P374)
310
500
700
VDC
50 –VAC
400 VDC
R49
F862
R41
500 VAC
300 –VAC
Metallized Polypropylene Metallized Polypropylene Metallized Impregnated Metallized Polypropylene Metallized Impregnated
Paper
Paper
PME295
(P295)
PMZ2074
(P374)
310RSB
VAC/330
VAC
310
VAC
300
VAC
F862– 125°C
R71 VAC Metallized Impregnated
440 R41
VAC/480
275 VAC (2x X2)
Metallized
Polypropylene
Metallized
Polypropylene
SMPS PFC
Applications
5 mm
(Stacked)
Paper
Paper
PZB300
(P300)
310
300
VAC
420
–
1,000
VDC
50 –VAC
630
VDC
R47
R47VAC
440 VAC/480
275
VAC (2x
PME271Y
A –X2)
E (P272) Metallized Impregnated
Metallized Polypropylene Metallized Polypropylene
Impregnated
Paper
PZB300
(P300)Paper
440A50
VAC
440 VAC/520 VAC
R47
VAC
PME271Y A –A70
E (P272) Metallized300
275 VAC (X2 + 2x Y2)
Impregnated
Axial
Impregnated
Paper
Axial
Paper
440 50
VAC/520
P278VAC
– 1,000
VDC
300 –VAC
160
630 VDC
R46
PME271Y
(P271)
275 VAC
(X2 + 2x
Y2)
Metallized Impregnated Metallized Polypropylene
Impregnated Paper
Paper
310 VAC
MDKR46
(F683/4/5/7/8)
250 VAC
PME271Y (P271)
480In-Line
VAC
MetallizedDual
Polypropylene
Impregnated Paper
HighVAC
Current
310
250
VAC
P410
R46 (Miniature)
50 – 630
VDC
Metallized
Impregnated
Paper
275 VAC
R46 (Miniature)
300 VAC
275 VAC (P277)
PME271E
R46 – 125°C
Metallized Impregnated Metallized Polypropylene
Paper
275 VAC
R46 –300
125°C
VAC
275
VAC
PME264
(P264)
PHE844 (F844)
Metallized Polypropylene Metallized Impregnated
Paper
PME264
(P264)
440/480
VAC
660 VAC
Paper
P409
PHE845
660 VAC(F845)
Metallized
Impregnated
Paper
P409
760 VAC
275 VAC
Motor Run
Paper
PME271M (P276)
Applications
275 VAC
Paper
PME271M (P276)
275 VAC
Screw/Faston
Screw/Faston
Paper
Axial
Radial
275 VAC
Terminal
Terminal
C4C
Axial Round
850 – 3,000 VDC/
450 – 750 VAC
Screw/Faston
Terminal
Screw/Faston
Terminal
C4DE
Pulse & AC
Me
Int
Me
Int
Me
• Capacitance tolerance: ±10%, ±20%, ±5% on request
film capacitor with radial leads of tinned wire. Radial leads are
• Climatic category: 55/105/56, IEC 60068–1
electrically welded to the contact metal layer on the ends of
• Tape and reel packaging in accordance with IEC 60286–2
the capacitor
winding.
The capacitor
is encapsulated
in a selfGeneral
Purpose
Metallized
Polyester
Film Capacitors
• RoHS Compliant and lead-free terminations
extinguishing material meeting the requirements of UL 94 V–0.
• Operating temperature range of -55˚C to +105˚C
blocking, coupling, decoupling, bypassing and interference
suppression in low voltage applications such as automotive. Not
for use with the mains.
Film Capacitors
R60 Series, Radial, 10 – 37.5 mm Lead Spacing,
Through-Hole – General Purpose
50 – 1,000 VDC (Automotive Grade)
Metallized Polyester
Overview
Applications
Benefits Polyester Film, 5 – 37.5 mm Lead Spacing, 50 – 1,000 VDC
F611 & F612 Series Metallized
Part
Number
Capacitance Range: 0.001 to
μFSeries
• Temperature
−55°C
to +105°C
The180
R60
is System
constructedRange:
of metallized
polyester
film
Typical applications include blocking, coupling, decoupling,
bypassing and interference suppression in low voltage
104
M
050 for across-the-line
C
applications
such as automotive.
Not suitable
Capacitance
Code
Capacitance Capacitors).
Rated Voltage
application
(see Suppressor
Packaging
• Voltage range: 50 – 630 VDC
(wound or stacked technology) with radial leads of tinned wire.
• Capacitance range: 0.001 – 2.2 µF
F are electrically
611 welded to the Jcontact metal layer
F on
Radial leads
• Lead spacing: 5 mm
Lead
Spacing is encapsulated
theCapacitor
ends ofClass
the capacitor
winding.
The
capacitor
Series
Size Code
• Capacitance tolerance:
±10%, ±20%, (mm)
±5% on request
in a self-extinguishing solvent resistant plastic
case with
• Climatic
category:
55/125/56
F = Film
Metallized
J=5
See Dimension
thermosetting resinPolyester
material meetingK the
UL 94V–0 requirements.
= 7.5 with IEC 60286–2
Table
• Tape and reel packaging
in accordance
Purpose611
Metallized
= Wound Polyester
A = 10.0Film Capacitors
•General
RoHS Compliant
and
lead-free terminations
= Stacked
B = 15.0
Automotive Grade 612
devices
are available
(up to lead spacing 22.5
• Operating temperature range of -55˚C
to +125˚C
D = 22.5
mm) and meet the demanding Automotive
Electronics. Council's
F = 27.5
• Designed for high performance, high
temperature applications
R = 37.5
(pF)
First two digits
represent
significant
figures. Third
digit specifies
number of zeros.
Tolerance
J = ±5%
K = ±10%
M = ±20%
(VDC)
050 = 50
063 = 63
100 = 100
160 = 160
250 = 250
400 = 400
630 = 630
1K0 = 1,000
R66 Series, Radial, 7.5 mm Lead Spacing, 50 – 630 VDC
(Automotive Grade)
Overview
Benefi
Part
2.2Number
μFts• Temperature
See Ordering
Options Table
Applications
F622 Series, 125ºC, Halogen Free, 5 mm (Stacked), 50 – 630 VDC
The R66 Series is constructed of metallized polyester film
(wound
or
stacked
technology)
with
radial
leads
of
tinned
wire.
bypassing and interference suppression inOne
lowworld.
voltage
One KEMET
F are electrically
622 welded to the Jcontact metal layer
F on
104
M
050 for across-the-line
C
Radial
leads
applications
such
as
automotive.
Not
suitable
©
KEMET
Electronics
Corporation
•
P.O.
Box
5928
•
Greenville,
SC
29606
(864)
963-6300
•
www.kemet.com
F3065_F611_F612
• 4/16/2015
1
• Capacitance range: 0.001 µF – 150.0 µF
Capacitance
Code
Capacitance Capacitors).
Rated Voltage
Lead
Spacing is encapsulated
the
ends
of
the
capacitor
winding.
The
capacitor
application
(see
Suppressor
• Capacitor
Lead spacing:
37.5 mm
Packaging
Size Code
Class 10.0 –Series
(pF)
Tolerance
(VDC)
(mm) case with
in
a self-extinguishing
solvent
plastic
• Capacitance
tolerance:
±5%,resistant
±10%, ±20%
= 594V–0 requirements.
See Dimension
First two digits
See Ordering
F = Film resin material
Metallized
J = ±5%
050 = 50
thermosetting
meeting theJUL
• Climatic category:
55/105/56
Polyester
Table
represent
significant
figures. Third
digit specifies
number of zeros.
Automotive
Grade devices
are available
and meet the
• RoHS compliance
and lead-free
terminations
demanding
Automotive
Electronics
Council's
• Tape and reel packaging in accordance withAEC–Q200
IEC 60286–2
qualifi
cation requirements.
• Self-healing
• Automotive (AEC–Q200) grades available up to pitch 22.5 mm
K = ±10%
M = ±20%
063 = 63
100 = 100
250 = 250
400 = 400
500 = 500
630 = 630
Options Table
R60 Series, Radial, 10 – 37.5 mm Lead Spacing, 50 – 1,000 VDC (Automotive Grade)
Part
220Number
μF
Benefi
ts • Temperature
• Voltage
range: 50 – 630 VDC
R60
M
F
2470
60 One world. OneKKEMET
AA
©
Electronics
Corporation
• P.O.
• KEMET
Capacitance
range:
0.001 µF
– Box
4.7 5928
µF • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
Series
Rated Voltage (VDC)
Length (mm)
Packaging
• Lead Spacing: 7.5 mm
Polyester
C = 50±5%, ±10%, ±20%
F = 10
Digits 2-4 indicate the
• Metallized
Capacitance
tolerance:
D = 63
I = 15
first three digits of the
• Climatic category: 55/105/56
E = 100
N = 22.5
capacitance value.
• Operating temperature
range of -55˚C Rto=+105˚C
G = 160
27.5
First digit indicates the
= 250
W = 37.5
• RoHS compliance Iand
M = 400
added.
in
accordance
with
IEC
60286–2
P = 630
• Self-healing
Q = 1000
• Automotive (AEC–Q200) grades available
F3066_F622 Capacitance
• 4/16/2015
Internal Use
Tolerance
00
J = ±5%
01
K = ±10%
30
M = ±20%
40
50
6A
L0
L1
See Ordering
Options Table
R66 Series, Radial, 7.5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade)
© KEMET
CorporationRange:
• P.O. Box 5928
• Greenville,
SC 29606 (864) 963-6300 • www.kemet.com
Part
System
4.7Number
μFElectronics
• Temperature
−55°C
to +105°C
R66
Series
Metallized
Polyester
E
Rated Voltage
(VDC)
C = 50
D = 63
E = 100
I = 250
M = 400
P = 630
D
3100
Length (mm)
D = 7.5
Digits 2-4 indicate the first three
digits of the capacitance value.
First digit indicates the number of
zeros to be added.
F3103_R60 • 4/16/2015
AA
Lead and
Packaging Code
See Ordering
Options Table
1
7A
J
Internal Use
10
6A
7A
1
Capacitance
Tolerance
J = ±5%
K = ±10%
M = ±20%
F3102_R66 • 4/16/2015
1
61
• Capacitance tolerance: ±5%, ±10%, ±20%
Automotive
grade devices
are available and meet the demanding
55/105/56
Automotive
qualification
• OperatingElectronics
temperatureCouncil's
range ofAEC–Q200
-55˚C to +105˚C
requirements.
• RoHS compliance and lead-free terminations
Applications
Overview
• Self-healing
The
A50 ts
Series is constructed of metallized polyester film
Benefi
bypassing and interference suppression in low voltage
(wound technology) with axial leads of tinned wire. Axial leads
Metallized Polyester
(cont.)
applications such as automotive. Not suitable for across-the-line
•areVoltage
range:
50
–
630
VDC
electrically welded to the contact metal layer on the ends of
application (see Suppressor Capacitors).
•theCapacitance
range:
0.001
–
2.2
µF
capacitor winding. The capacitor is encapsulated in polyester
R82 Series, 5 mm Lead• Spacing,
50
– 400 VDC (Automotive Grade)
Lead
spacing:
5
mm
tape
wrapping
with
thermosetting
resin
end
fi
lled.
Part
4.7Number
μF • Temperature
• Capacitance
tolerance: ±20%,
±10% standard,
±5% on request
Automotive
grade
devices
are
available
and
R82
D
C meet the demanding
3470
AA
60
J
55/125/56
Automotive
Electronics
RatedCouncil's
Voltage AEC–Q200 qualification
Lead and
Capacitance
Series temperature range of -55˚C
Lengthto(mm)
Internal Use
• Operating
+125˚C
requirements.
(VDC)
Packaging Code
Tolerance
• RoHS
CompliantC and
Metallized
= 50 lead-free terminations
C = 5.0
See Ordering
30
J = ±5%
Polyester
D = 63
Options Table
50
K = ±10%
• Tape
and reel packaging
in accordance with IEC 60286–2
60
M = ±20%
• Self-healing E = 100
I = 250
zeros to be added.
70
• Automotive (AEC–Q200)
grades
available
M = 400
(Automotive Grade)
Film Capacitors
Benefi
Generalts
Purpose, Pulse and DC Transient Suppression
MDK
Series
Metallized
Polyester
Film,
Dual In-Line,
• Voltage
range: 50Pulse
–50
1,000
VDC
General
Purpose,
DCVDC
Transient
Suppression
RSB Series, 125ºC, 5 mm
(Stacked),
–and
630
(Automotive
Grade)
•Part
Capacitance
range:
0.001 – 10 µF
System
2.2Number
μF
• Temperature
−55°C
to +125°CFilm,
Low
ESR/ESL,
50Range:
– 630
VDC
MDK
Series
Metallized
Polyester
Dual In-Line,
• Diameter: 5 – 22 mm
• Length
11 – 33 mm
RSB
D
C
3100
AA
00 One world. One
J KEMET
•© KEMET
Capacitance
tolerance:
±5%,
±10%,
±20%
Electronics
Corporation
• P.O.
Box 5928
(864) 963-6300
F3101_R82Capacitance
• 4/16/2015
1
Capacitance
Code • www.kemet.com
Series
Rated Voltage (VDC)
Length (mm)
Packaging
Internal Use
Overview
(pF) Applications
Tolerance
Polyester
C = 50range of -55˚C to +105˚C
C = 5.0
The last three digits
See Ordering
30
J = ±5%
• Metallized
Operating
temperature
D = 63 polyester (PET) film capacitor. represent signifi
cant applications
Options Table
50
K = ±10%
Overview
Applications
Dual
in-line
(DIL) metallized
Typical
include high frequency
switched-mode
power
• RoHS
Compliant
and
E = 100
figures.supplies, DC/DC converters and input/output
60
M = ±20%
Encapsulation
in
self-extinguishing
material
meeting
the
fi
ltering.
I = 250 in accordance with IEC 60286–1First digit specifies
70
Dual in-line (DIL)
metallized
polyester (PET) film capacitor.
Typical applications include high frequency
switched-mode power
requirements
= 400
number of zeros.
• Self-Healingof UL 94MV–0.
Encapsulation in self-extinguishing
material
meeting
the
supplies,
DC/DC
converters
and
input/output
filtering.
W
=
500
= 630
requirements of UL 94PV–0.
Low ESR/ESL, 50 – 630 VDC
ts
A50 Series Axial PulseBenefi
DC Transient,
50 – 1,000 VDC (Automotive Grade)
Part
SystemRange: −55°C to +105°C
10 Number
µF • Temperature
Benefi
• Rated ts
voltage: 50 – 630 VDC
Electronics30
Corporation
•© KEMET
Rated
voltage:
– 220
A50
C VAC
F
3470
AA
Rated voltage:range:
50Rated
– 630
VDC
Voltage
Lead and
•• Capacitance
0.033
– 15 µF
Series
Length (mm)
Packaging Code
Rated voltage:tolerance:
30 – (VDC)
220±5%,
VAC ±10%, other tolerances on request
•• Capacitance
Metallized
C =55/125/56
50
F = 11
See Ordering
•• Capacitance
range:
0.033 – 15 µF
Climatic
category:
Polyester tolerance:
D = 63 ±5%, ±10%,
H= 14other tolerances
digitson
of the
capacitance value.
Options Table
•• Capacitance
request
RoHS CompliantE and
= 100lead-free terminations
K = 20.5
Climatic category:
55/125/56
•• Operating
temperature
range of -55˚C
I = 250
Q = 28 to +125˚C
zeros to be added.
• RoHS CompliantMand
= 400lead-free terminations
T = 33
P = 630 range of -55˚C to +125˚C
00
F3067_RSB • 4/16/2015
J
Internal Use
00, 60 (Standard)
1
Capacitance
Tolerance
J = ±5%
K = ±10%
M = ±20%
Q = 1000
MDK Series, Dual In-Line,
High
Current,
– 630 VDC
Legacy
Part
Number50System
Capacitance Range: 0.033 to 15 μF • Temperature Range: −55°C to +125°C
Legacy
Part Number
System
MDK
10
K
50
© KEMET
• P.O. Box 5928 •333
Greenville, SC 29606 (864) 963-6300
• www.kemet.com
Legacy Part Number System
Lead Spacing
10
(mm)
Series
MDK
Dual
In-Line,
Series
Metallized
Polyester
Dual
In-Line,
Metallized
Polyester
Size
Code
A52
J Capacitance
= ±5
K =Tolerance
±10%
Other
J = ±5tolerances
on
K =request
±10%
Rated50
Voltage
(VDC)
100
250
50
400
100
630
250
Number of Leads See Ordering
SizeSee
Code P3 = 3 leads
Packaging Code
Side
Dimension P4 =per
4 leads
Options Table
Table
P5
=
5
leads
See
P3 = 3 leads
See Ordering
leads
Dimension P7
P4 == 47 leads
Options Table
P8
=
8
leads
Table
P5 = 5 leads
Other tolerances
on request
400
630
1
Number of Leads
Packaging
TUBECode
perP3
Side
P7 = 7 leads
P8 = 8 leads
New KEMET Part Number System
NewFKEMET68Part Number
3 System
A
Capacitor
F = Film
Class
F = Film
62
Rated Voltage
50
(VDC)
Capacitor
F
Class
value in picofarads. The third digit is
the number of following zeros.
P3
TUBE
F3071_A50_AXIAL
• 4/16/2015
Capacitance
K
Tolerance
Capacitance
333Code (pF)
Lead Spacing
10
First two
digits indicate
the(pF)
two most
Capacitance
Code
(mm)
15
significant digits of the capacitance
valuetwo
in picofarads.
Thethe
third
is
10
First
digits indicate
twodigit
most
the cant
number
of of
following
zeros.
15
signifi
digits
the capacitance
A52
Series
68
Number of
Lead Spacing
3 Side
A
Leads per
(mm)
of
Dual
In-Line, 3Number
= 3 leads
Series
Side
Metallized Leads
4 = 4 per
leads
Polyester
Dual
In-Line, 53 == 53 leads
leads
74 == 74 leads
Metallized
leads
leads
Polyester
58 == 58 leads
7 = 7 leads
8 = 8 leads
Lead
Spacing
A = 10
B = (mm)
15
A = 10
B = 15
A
333
K
050
T
SizeACode
Capacitance
333Code (pF)
Capacitance
K
Tolerance
Rated Voltage
050
(VDC)
Packaging
T
Code
JCapacitance
= ±5
K Tolerance
= ±10%
Other
J = ±5
tolerances
K = ±10% on
request
Other
Rated
050 = Voltage
50
100(VDC)
= 100
250
050 == 250
50
400
400
100 == 100
630 == 250
630
250
Packaging
See
Ordering
CodeTable
Options
ASize
= Standard
Code
box size
First
two digits Code
indicate
the
Capacitance
(pF)
two most significant digits
of
thetwo
capacitance
valuethe
in
A = Standard
First
digits indicate
picofarads.
The third
box size
two most signifi
cant digit
digitsis
the
of following
zeros.
of number
the capacitance
value
in
picofarads. The third digit is
tolerances on
request
See Ordering
Options Table
400 = 400
630 = 630
F3076_MDK • 4/16/2015
1
• Lead spacing: 10.2 – 25.4 mm
•• Lead
spacing:tolerance:
10.2 – 25.4
mm ±20%, ±5% on request
Capacitance
±10%,
Capacitance
tolerance:
±10%,
±20%,
±5% on request
•• Climatic
category:
40/70/56,
IEC
60068–1
Climatic
40/70/56,
IEC 60068–1
•• Tape
andcategory:
reel packaging
in accordance
with IEC 60286–2
•• Tape
reel packaging
in accordance
with IEC 60286–2
RoHSand
Compliant
and lead-free
terminations
•• Operating
RoHS Compliant
and
lead-free
terminations
temperature range of -40˚C to +70˚C in AC applications
•• Operating
temperature range
range of
of -40˚C
-40˚C to
to +100˚C
+70˚C ininAC
Operating temperature
DCapplications
applications
General
Purpose,
Pulserange
and ofDC
Transient
Suppression
temperature
-40˚C
to +100˚C
applications
•• Operating
Excellent self-healing
properties.
Ensures
long in
lifeDC
even
when
• subjected
Excellent self-healing
properties. Ensures long life even when
to
frequent
over-voltages.
Metallized Paper &subjected
Polyphenylene
Sulfide
to frequent
over-voltages.
• Good resistance
to ionization
due to impregnated dielectric
• Good resistance
ionization
due mm
to impregnated
dielectric 400
PME261 Series Impregnated
Paper, to10.2
– 25.4
Lead Spacing,
Film Capacitors
SMR Series Metallized Polyphenylene Sulfide Film, +150°C,
5.0 – 27.5 mm Lead Spacing, 50 – 400 VDC
– 1,000 VDC
1 µF • Temperature
−40°C to +70°C AC app & −40°C to +100°C DC app
Legacy
Part NumberRange:
System
Legacy Part
Number System
Legacy
OverviewPart Number System
Applications
PME261
K
A
5100
K
R30
PME261
K
A
5100
K
R30
Capacitance
The SMR
Series
is
a
metallized
polyphenylene
sulfi
de
fi
lm
Typical
applications
include
automotive
and
other
applications
Series
Rated Voltage (VAC)
Lead Spacing (mm)
Packaging
Capacitance
Tolerance
capacitorSeries
with vacuum-evaporated
electrodes.
with high ambient
Packaginghigh
Rated Voltagealuminum
(VAC)
Lead
Spacing Radial
(mm)
Capacitance
Code (pF)temperatures, as well as those requiring
Tolerance
Metallized
Paper
= 220
= 10.2
2 – 4 indicate
rst three The
J =capacitor
±5%
See Ordering
leads
of tinned
wire areKelectrically
welded toAthe
contact metal Digitsstability
and the
lowfilosses.
offers excellent
sound
E = 300
B
digits2of– the
capacitance
value.
±10%
Options
Table
Paper
220
A = 15.2
10.2
Digits
4 indicate
the first
three K
J == ±5%
See Ordering
layerMetallized
on the ends
of theKJ capacitor
winding.
The
capacitor
quality
audio
applications.
in
C = 15.2
20.3
digitcapacitance
indicates the
M
±20%
E == 500
300
B
digitsFirst
of the
value.
K == ±10%
Options Table
is encapsulated in self-extinguishing
materialECmeeting
= 25.4
total
number
of digits in
J = 500
20.3 the
First
digit indicates
thethe
M = ±20%
valuein the
E = 25.4
total capacitance
number of digits
requirements of UL 94 V–0.
capacitance value
SMR Series
New KEMET
Part
New
PartNumber
NumberSystem
System
BenefiKEMET
ts
P range: 50 –561
E
103
K
• Voltage
400 VDC; 30 –H200 VAC
P
561
H
E
103
K
Lead
Spacing
Capacitance
• Capacitor
Capacitance
0.001 – 22 µF
Size Code
Class range:
Series
Spacing
Capacitance
Tolerance
• Capacitor
Lead spacing:
27.5 mm Lead(mm)
Class 5 – Series
Size Code
(mm)
P = Paper
Metallized
= 10.2
First two digits indicate the
J =Tolerance
±5%
• Capacitance
tolerance:
±10%,H±20%,
±2.5% See
andDimension
±5%
Paper
Q
15.2
Table
two most
signifiindicate
cant digits
K
±10%
P = Paper
Metallized
H = 10.2
See Dimension
First
two digits
the
J == ±5%
on request
General
C
oftwo
themost
capacitance
M
±20%
Paper
Q = 20.3
15.2
Table
significantvalue
digitsin
K == ±10%
• Climatic category:Purpose
55/150/56, IEC
60068–1
E
picofarads.
The thirdvalue
digitinis
General
C = 25.4
20.3
of the capacitance
M = ±20%
number ofThe
following
zeros.
Purpose in accordance
E = 25.4 with IEC 60286–2 the
picofarads.
third digit
is
the
number
of
following
zeros.
•© KEMET
Category
temperature
range
-55Box
to +150°C
Electronics
Corporation
• P.O.
Polyphenylene
Sulfide
Film,
+150°C,
5.0 – 27.5 mm Lead Spacing, 50 – 400 VDC
•© KEMET
Rated Electronics
temperature
+125°C• P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
Corporation
Series
Metallized PPS
300
300
220 = 220
500
300 = 500
300
500 = 500
A
A
Packaging
Packaging
See Ordering
Options
Table
See Ordering
Options Table
One world.• One
KEMET 1
F3070_PME261
4/16/2015
F3070_PME261 • 4/16/2015
1
Legacy Part
Legacy
PartNumber
NumberSystem
System
SMR
220
Rated220
Voltage
Rated
Voltage
(VAC)
220 =(VAC)
220
104
5
K
Lead Spacing (mm) Capacitance Code (pF)
5 = 5.0
7.5 = 7.5
10 = 10.0
15 = 15.0
22.5 = 22.5
27.5 = 27.5
First two digits indicate
the two most significant
digits of the capacitance
value in picofarads. The
third digit is the number
of following zeros.
Capacitance
Tolerance
H = ±2.5%
J = ±5%
K = ±10%
M = ±20%
50
Rated Voltage
(VDC)
50 = 50
63 = 63
100 = 100
250 = 250
400 = 400
J01
L4
BULK
Size Code
Lead Length
Packaging
See Dimension
Table
Letter "L"
followed by lead
length in mm
See Ordering
Options Table
K
050
C
Capacitance
Tolerance
R = ±2.5%
J = ±5%
K = ±10%
M = ±20%
Rated Voltage
(VDC)
050 = 50
063 = 63
100 = 100
250 = 250
400 = 400
New
KEMETPart
PartNumber
NumberSystem
System
New KEMET
F
211
Capacitor Class
Series
F = Film
Metallized PPS
J
Lead Spacing
(mm)
J = 5.0
K = 7.5
A = 10.0
B = 15.0
D = 22.5
F = 27.5
F
104
Size Code
See Dimension
Table
of the capacitance value in
Packaging
See Ordering
Options Table
F3072_SMR • 4/16/2015
1
63
•The
Tape
reel ispackaging
in accordance
IEC 60286–2film
R79and
Series
constructed
of metallizedwith
polypropylene
•with
RoHS
Compliant
and
lead-free
terminations
Polypropylene
Pulse/High
Frequency
Capacitors
radial leads of tinned wire. The radial leads are electrically
• Category
-55˚Coftothe+105˚C
welded
to thetemperature
metal layerrange
on theofends
capacitor winding.
•The
Rated
temperature
+85˚C in a self-extinguishing solvent
capacitor
is encapsulated
Typical applications include timing, oscillator circuits, high
frequency coupling and decoupling applications. Not suitable for
across-the-line application (see Suppressor Capacitors).
Film Capacitors
R75 Series Single Metallized Polypropylene Film, Radial,
DC and
Pulse
(Automotive
Grade) Through-Hole – Pulse & AC
resistant
plastic
case withApplications
thermosetting resin material
meeting
the UL 94V–0 requirements.
Applications
Single Metallized Overview
Polypropylene
Typical applications include deflection circuits in televisions
(S-correction), resonant capacitor in electronic ballast and
compact lamp, power factor correction and coupling capacitor
welded to the metal layer on the ends of the capacitor winding.
•The
Voltage
range:
160
–
630
VDC
in switched mode power supply (SMPS), timing and oscillator
capacitor
is46x
encapsulated inKa self-extinguishing
solvent
F
E
223
J
160
C
•resistant
Capacitance
range:
0.001
– 0.22 µF resin material meeting
circuits. Not suitable for across-the-line application (see
plastic
case
with
thermosetting
Capacitor
Lead Spacing
Capacitance
Lead and
Series
Size Code
Capacitance Code
(pF)
Rated Voltage (VDC)
•theLead
Spacing:
5 mm
Suppressor
Capacitors).
UL 94V–0
requirements.
Two
Class
(mm)different winding constructions
Tolerance
Packaging Code
•areCapacitance
tolerance:
±5%,
±10%,
±20%
=5
Seeand
Dimension
J = ±5%
160 = 160
See Ordering
F =used
Film depending
Metallized
on voltageJ parameters
lead spacing.
•Please
Climatic
category:
55/105/56
Polypropylene
K IEC
= 7.5 60068-1 for
Table
K = ±10%
250 = 250
Options Table
see
the
Performance
Characteristics
more
Polypropylene
Pulse/High
Frequency
= sections
in range
A =of10-55˚C Capacitors
On Request:
400 = 400
•information.
Operatingxtemperature
to +105˚C
construction
B = 15
picofarads. The third digit
F = ±1%
630 = 630
• RoHS compliance and lead-free
terminations
D = 22.5
is the number of following
G = ±2%
1K0 = 1000
Automotive
grade
devices
are
available
(up
to
lead
spacing
22.5
• Tape and reel packaging inFaccordance
with IEC 60286–2
= 27.5
zeros.
M = ±20%
1L2 = 1250
= 37.5
1K6 = 1600
and meet the demandingR Automotive
Electronics Council's
•mm)
Self-healing
2K0 = 2000
The R75
Series160
is constructed
metallized polypropylene film
F461 – 464 Series Halogen
Free,
– 2,500ofVDC
Benefi
with
ofSystem
tinned wire.
The radial
leads
are electrically
Part
Number
56radial
μFts•leads
Temperature
Range:
−55°C
to +105°C
R74 Series Single Metallized Polypropylene Film, Radial,
AC Applications (Automotive Grade)
2K5 = 2500
Overview
Benefits Spacing, 160 – 630 VDC
R79 Series Radial, 5 mm
The Lead
R74 Series is constructed of metallized polypropylene film
Part
Number
System
0.22
μFrange:
• Temperature
−55°C
with
radial
leads
of160
tinned
wire.Range:
The radial
leadsto
are+105°C
electrically
• Voltage
– 2,000
VDC
are used depending on voltage parameters. Please see the
Performance Characteristics for more information.
welded
to the metal
layer
ends
winding.
• Capacitance
range:
220onpFthe
– 33
µFof the capacitorSC
© KEMET
29606 (864)
F3028_F461-464 • 4/16/2015
R79
G • P.O. Box 5928 • Greenville,
C
2390
40
K 22.5 1
The
capacitor
is encapsulated
Automotive GradeAA
devices are available
(up to lead spacing
• Lead
Spacing:
7.5 – 37.5 mmin a self-extinguishing solvent
Lead and
Capacitance
resistant
plastic tolerance:
case
thermosetting
resin
material
mm)(pF)
and meet the demanding Automotive
Series
Ratedwith
Voltage
(VDC)
Spacing
(mm) meeting
Capacitance Code
Internal UseElectronics Council's
• Capacitance
±5%,
±10%,Lead
±20%
Packaging Code
Tolerance
the
UL 94V–0
requirements.
Four
different
winding constructions AEC–Q200 qualification requirements.
• Climatic
category:
55/105/56
IEC
60068-1
Metallized
G = 160
C=5
Digits 2 – 4 indicate the
See Ordering
40
H = 2.5%
• Polypropylene
Operating temperatureI =range
250 of -55˚C to +105˚C
Options Table
45
J = ±5%
= 400
capacitance value.
K = ±10%
• RoHS compliance andM lead-free
terminations
P = 630
in accordance with IEC 60286–2
• Self-healing
added.
Benefi
ts
Applications
• Automotive (AEC–Q200) grades available up to lead spacing
22.5mm
• Voltage range: 250 – 900 VAC
Typical applications include electronic lighting such as automotive
range: 470 pF –160
3.3 µF
headlamps
and ballasts, as well as pulse applications with high
R75 Series Radial, DC •&Capacitance
Pulse Applications
– 2,000 VDC (Automotive
Grade)
Part
Number
System
•
Lead
Spacing:
10
–
37.5
mm
AC
voltage
and
high current. Not suitable for across-the-line
Capacitance Range: 220 pF to 33 μF • Temperature Range: −55°C to +105°C
• Capacitance tolerance: ±5%, ±10%
application (see Suppressor Capacitors).
R75category: 55/105/56
P IEC 60068-1 N
2820
AA
30
K
• Climatic
Lead
and
Capacitance
One
world.
One
KEMET
• Operating
range(VDC)
of -55˚C
toSpacing
+105˚C(mm) Capacitance Code (pF)
Series temperature
Rated Voltage
Lead
Internal Use
Packaging Code
©
Corporation
• P.O. Box
F3107_R79 •Tolerance
4/16/2015
1
• KEMET
RoHS Electronics
compliance
and lead-free
terminations
Metallized
G = 160
D = 7.5
See Ordering
00
J = ±5%
• Tape
and
reel
packaging
in
accordance
with
IEC
60286–2
Polypropylene
I = 250
F = 10
Options Table
10
K = ±10%
• Self-healing
M = 400
I = 15
capacitance value.
30
M = ±20%
P = 630
N =up
22.5
40
• Automotive (AEC–Q200)
grades available
to lead spacing
Q = 1,000
R = 27.5
50
22.5 mm
R = 1,250
T = 1,600
U = 2,000
W = 37.5
added.
60
70
80
R74 Series Radial, AC Applications 250 – 900 VAC (Automotive Grade)
F3106_R75 • 4/16/2015
Number
Capacitance Range: 470 pFPart
to 3.3
μF • Temperature
R74
5
N
Series
Rated Voltage (VAC)
Lead Spacing (mm)
Metallized
Polypropylene
L = 250
N = 400
5 = 500
6 = 600
7 = 700
9 = 900
F = 10
I = 15
N = 22.5
R = 27.5
W = 37.5
2180
capacitance value.
added.
AA
Lead and
Packaging Code
See Ordering
Options Table
00
J
Internal Use
00
30
60
1
Capacitance
Tolerance
J = ±5%
K = ±10%
64
F3104_R74 • 4/16/2015
1
•welded
Lead to
Spacing:
10.0layer
– 22.5
mmends of the capacitor winding.
the metal
on the
•The
Capacitance
tolerance:
±5%,
capacitor is encapsulated in±10%
a self-extinguishing solvent
•resistant
Climaticplastic
category:
IEC 60068-1
case55/125/56
with thermosetting
resin material meeting
• Operating
temperature
range
of -55˚C Capacitors
to +125˚C
Polypropylene
Pulse/High
Frequency
UL
94V–0 requirements.
• Self-healing
Suppressor Capacitors).
Film Capacitors
A70 Series
Through-Hole – Pulse
& AC Single Metallized Polypropylene Film, Axial
Single MetallizedOverview
Polypropylene
(cont.)
Benefi
ts
Applications
The A70
is constructed
of metallized
polypropylene
film
Typical applications include temperature compensation circuits,
R74 Series 125°C Radial,
AC Series
Applications
500
– 700 VAC
(Automotive
Grade)
• Voltage range: 420 – 1,000 VDC
timing, oscillator circuits, power factor correction and coupling
•welded
Capacitance
range:
0.01onµF
22 µFof the capacitor winding.
to the metal
layer
the– ends
capacitors in switched mode power supply (SMPS) applications.
•The
Lead
Spacing:
10 – 37.5 mmin a polyester tape wrapping case
capacitor
is
encapsulated
Not AA
suitable for across-the-line
application0(see Suppressor
R74
5
F
1100
H
J
•with
Capacitance
tolerance:
±10%, ±20%, ±5% (on request)
thermosetting
resin
material.
Capacitors).
Rated
Voltage
Lead and
Dimensions and
Capacitance
Series category: 55/105/56
Lead
Spacing
(mm) Capacitance Code (pF)
Internal Use
• Climatic
IEC
60068-1
(VAC)
Packaging Code Electrical Characteristics
Tolerance
• Operating
temperature
range ofF-55˚C
to +105˚C
Metallized
5 = 500
= 10.0
See Ordering
H = 125ºC
0 (Standard)
J = ±5%
• Polypropylene
RoHS compliance
7 = and
700 lead-freeI =terminations
15.0
Options Table
K = ±10%
N = 22.5 with IEC
capacitance
• Tape and reel packaging in accordance
60286–2value.
• Self-healing
axial
leads
tinned wire. The
axial leads
are electrically
Capacitance Range: 470 pFwith
to 0.018
μF •ofTemperature
Range:
−55°C
to +125°C
Part
Number
System
Benefits
added.
• Capacitance range: 0.001 µF – 4.7 µF
• Diameter:
5 – 21.5 mm
R71 Series Radial, SMPS
PFC Applications
420 – 1,000 VDC
Part
Number
•
Length:
11
– 33 System
mm
Capacitance Range: 0.01 to©22
μF •Electronics
Temperature
Range:
−55°C
to +105°C
KEMET
Corporation
• P.O. Box
SC 29606 (864) 963-6300 • www.kemet.com
• Capacitance tolerance: ±5%, ±10%, ±20%
R71 category: 55/105/56
M
2100
AA
• Climatic
IEC 60068-1 F
Lead and
• Operating
temperature
range
of
-55˚C
to
+105˚C
Series
Rated Voltage (VDC) Lead Spacing (mm) Capacitance Code (pF)
Packaging Code
Metallized
M = 420
F = 10.0
See Ordering
in accordance with
IEC 60286–1
Polypropylene
V = 520
I = 15.0
Options Table
• Self-healing
P = 630
N = 22.5
capacitance value.
Q = 1,000
R = 27.5
W = 37.5
F3029_R74 125ºC • 4/16/2015
00
J
Internal Use
00, 10, 20, 30, 40
(Standard)
added.
1
Capacitance
Tolerance
J = ±5%
K = ±10%
M = ±20%
A70 Series Axial 160 – 630 VDC
Part
4.7Number
μF • Temperature
A70
G
F
2220
AA
Lead and
Series
Rated Voltage (VDC)
Length (mm)
Packaging Code
Metallized
G = 160
F = 11
See Ordering
Polypropylene
I = 250
H= 14
Options Table
M = 400
K = 20.5
capacitance value.
P = 630
Q = 28
T = 33
added.
00
J
One world.
One KEMET
Capacitance
Internal Use
F3030_R71 •Tolerance
4/16/2015
00 (Standard)
J = ±5%
K = ±10%
M = ±20%
1
F3032_A70_AXIAL • 4/16/2015
1
65
Benefits
Double
Metallized Polypropylene Film, Radial,
•R76
RatedSeries
voltage: 250
– 3,000 VDC
250 – 1,000
3,000 VAC
VDC
• Rated voltage: 180
DC
and
Pulse
Applications
(Automotive Grade)
Rated
voltage:
180 –0.00033
1,000
VAC
• Capacitance
range:
– 10 µF
Film Capacitors
Capacitance
0.00033
• Lead
spacing:range:
7.5 – 37.5
mm – 10 µF
Lead spacing:tolerance:
7.5 – 37.5±5%,
mm other tolerances on request
• Capacitance
• Capacitance
tolerance:
±5%, other
tolerances on request
Overview
Applications
Climatic category:
55/105/56,
IEC 60068–1
Climatic
55/105/56,
IEC 60068–1
• Tape
andcategory:
reel packaging
in accordance
with IEC 60286–2
The
R76and
Series
constructed
of polypropylene
film60286–2
and double
Tape
reel ispackaging
in accordance
with IEC
• RoHS
Compliant
and lead-free
terminations
Double Metallized Polypropylene
metallized
polyester
filmlead-free
as
electrodes
radial leads of tinned
(S-correction and flyback tuning) and monitors, switching spikes
RoHS Compliant
and
• Category
temperature
range
of terminations
-55˚Cwith
to +105˚C
wire.
The
radial
leads
are
electrically
welded
to
the
metal
layer
on
suppression in switched mode power supplies (SMPS), lamp
Category
temperature
PHE450 Series Radial,• 250
– 3,000
VAC range of -55˚C to +105˚C
the
ends
of
the
capacitor
winding.
The
capacitor
is
encapsulated
capacitors for electronic ballasts and compact lamps, and
to 10 μFPart
• Temperature
Legacy
Number System
in a self-extinguishing solvent resistant plastic case with
snubber and silicon-controlled rectifier (SCR) commutation
Legacy
Part
System
thermosetting
resinNumber
material meeting
the UL 94V–0 requirements.
circuits as well as applications with high voltage and high current.
PHE450
P
B
5180
J
B04
R06
Two different winding constructions are used depending on
Not suitable for across-the-line application (see Suppressor
PHE450
P
B
5180
J
B04
R06and
Capacitance
Lead
Voltage
Lead SpacingCharacteristics
(mm)
CapacitanceCapacitors).
Code (pF)
Optional Box Code
voltageSeries
parameters.Rated
Please
see(VDC)
the Performance
Tolerance
Packaging
Code
Capacitance
Lead and
Series
Rated
Voltage
(VDC)
Lead
Spacing
(mm)
Capacitance
Code
(pF)
Optional
Box
Code
for
more
information.
Tolerance
Packaging
Code
Metallized
H = 250
K = 7.5
Digits 2 – 4 indicate the first
J = ±5%
See Dimension
See Ordering
Polypropylene
Pulse/High
Frequency Capacitors
Through-Hole – Pulse & AC
Polypropylene
Metallized
K = 400
H
250
AK==10.0
7.5
three
the capacitance
Digitsdigits
2 – 4ofindicate
the first
S = 2000
R
1600
T = 2500
S
2000
X
3000
T = 2500
X = 3000
R
37.5
F = 27.5
R = 37.5
of zeros to be added.
Automotive
grade devices
lead spacing
22.5
M
630available (upA
Bto= Film/Foil,
15.0
value.
R73
Series
Polypropylene
Radial
Polypropylene
K =are
400
10.0
three
digits
of
the capacitance
PM==1000
D
First digit indicates
mm) and meet the demanding
Council's
630Automotive Electronics
B = 22.5
15.0
value. the number
R
= 1000
1600
27.5
zeros
to be added.
(Automotive
Grade)
First of
digit
indicates
the number
Prequirements.
DF = 22.5
AEC–Q200
qualification
Overview
Benefits
New
KEMET
Part
System
New
KEMET
PartNumber
Number
System
The
R73
Series isPart
constructed
of polypropylene
film and metal foil
KEMET
Number
•New
Voltage
range: 250 – 2,000
VDC System
OnJ =request:
±5%
= ±1%
OnF request:
G
±2%
F = ±1%
HG==±2.5%
±2%
±10%
HK == ±2.5%
M
±20%
K = ±10%
M = ±20%
Table
See Dimension
Table
Applications
or metallized film and metal foil with radial leads of tinned wire.
(flyback tuning), switching spikes suppression in switched mode
• Capacitance
range:
F
450 100 pF – 15 µF
B
D
183
J
1K0
C
The radial leads are electrically welded to the metal layer on the
power supply (SMPS), snubber and silicon-controlled rectifier
F Spacing: 7.5
450mm – 37.5 mm B
D
183
J
• Lead
Capacitor
Capacitance
Rated1K0
Voltage
LeadCand
Series
(mm)is encapsulated
Size Code in a Capacitance
(pF)
ends
of the capacitor
winding.Lead
TheSpacing
capacitor
(SCR)Code
commutation
circuits,
and switching
circuits Packaging
in electronic
Class
Tolerance
(VDC)
Code
Capacitor
Capacitance
Rated
Voltage
Lead and
• Capacitance
tolerance:
±5%,
±10%, ±20%
Series
Lead Spacing
(mm)
Size
Code
Capacitance
Codeas(pF)
self-extinguishing
solvent
resistant
plastic
case
with
thermosetting
ballasts,
well
as
applications
with
high
voltage
and
Tolerance
(VDC)
Packaging
Code
FClass
= Film category:
Metallized
K =60068-1
7.5
See Dimension First two digits indicate the
J = ±5%
250
= 250
Seevery
Ordering
• Climatic
55/105/56 IEC
resin
meeting
the UL 94V–0
current.
Not suitable
for across-the-line
(see
Polypropylene
==requirements.
10.0
Tabledifferent First
two most
signifi
cant digits
OnJ =request:
400
400application
Options
Table
F =material
Film temperature
Metallized
7.5 to +105˚C
SeeTwo
Dimension
twohigh
digits
indicate
the
±5%
250 = 250
See Ordering
• Operating
range ofAK-55˚C
B
capacitance
in
= ±1%
630 = 400
630
Polypropylene
A = 15.0
10.0 on voltageTable
significantvalue
digits
OnF request:
400
Options Table
winding constructions
are used depending
parameters.oftwothemost
Suppressor
Capacitors).
• RoHS compliance and lead-freeDB =terminations
22.5
picofarads.
The third
digitin
G
= ±1%
±2%
1K0
==1000
15.0
of
the
capacitance
value
F
630
630
Please see the Performance Characteristics
for
more
information.
27.5 with IEC 60286–2 is
the number
of third
following
HG==±2.5%
1K6 = 1000
1600
• Tape and reel packaging in accordance
DF = 22.5
picofarads.
The
digit
±2%
1K0
R
37.5
zeros.
±10%
2K0
2000
F = 27.5
is the number
of following
HK == ±2.5%
1K6 = 1600
• Self-healing
Automotive
grade devices are available
(up
to
lead
spacing
22.5
M
±20%
2K5 = 2000
2500
R = 37.5
zeros.
K = ±10%
2K0
•mm)
Automotive
(AEC–Q200)
grades
available
up
to
lead
spacing
3K0
and meet the demanding Automotive Electronics Council's
M = ±20%
2K5 = 3000
2500
22.5mm qualification requirements.
3K0 = 3000
AEC–Q200
One world.• One
KEMET 1
F3033_PHE450
4/16/2015
F3033_PHE450 • 4/16/2015
1
R76 Series Radial, DC & Pulse Applications 250 – 2,000 VDC (Automotive Grade)
Part
Capacitance Range: 100 pFBenefi
to 15Number
μF
ts • Temperature
R76range: 100 – 2,000
I VDC
D
1680
AA
Voltage
Lead and
Capacitance
range:
100
pF
–
2.2
µF
Series
Rated Voltage (VDC) Lead Spacing (mm) Capacitance Code (pF)
Packaging Code
Lead Spacing: 15 – 37.5 mm
Metallized
I
=
250
D
=
7.5
Digits
2
–
4
indicate
the
See Ordering
Capacitance tolerance: ±2.5% (for 2-section construction only)
Polypropylene
M = 400
F = 10.0
Options Table
±5%, ±10%
P = 630
I = 15.0
capacitance value.
Q = 1000 IEC 60068-1
N = 22.5
T = range
1600 of -55˚C toR+105˚C
= 27.5
U = 2000
W = 37.5
added.
• Self-healing
Electronics
Corporationgrades
• P.O. Box
SCspacing
29606 (864) 963-6300 • www.kemet.com
•© KEMET
Automotive
(AEC–Q200)
available
up to lead
Polypropylene
22.5mm
•
•
•
•
Film/Foil
Options
Table
See Ordering
Options Table
00
H
Capacitance
Tolerance
H = ±2.5%
(for C ≥ 0.001 µF only)
J = ±5%
K = ±10%
Internal Use
00, 30, 40, 70
(Standard)
F3034_R76 • 4/16/2015
1
R73 Series Radial 100 – 2,000 VDC (Automotive Grade)
Number
Capacitance Range: 100 pFPart
to 2.2
μF • Temperature
R73
E
I
2470
Series
Rated Voltage (VDC)
Lead Spacing (mm)
Polypropylene
Film/Foil
E = 100
G = 160
I = 250
M = 400
P = 630
Q = 1000
R = 1250
T = 1600
U = 2000
I = 15.0
N = 22.5
R = 27.5
W = 37.5
capacitance value.
added.
AA
Lead and
Packaging Code
See Ordering
Options Table
00
H
Internal Use
00, 10, 30, 40
(Standard)
Capacitance
Tolerance
H = ±2.5% (for
2-section construction
only)
J = ±5%
K = ±10%
66
F3037_R73 • 4/16/2015
1
63 – 250
1,000VAC
VDC
• Capacitance
0.0001
Rated voltage:range:
40 – 250
VAC– 0.022 µF
• Lead
spacing:range:
5 mm0.0001Frequency
Polypropylene
Pulse/High
Capacitance
– 0.022 µFCapacitors
• Capacitance
tolerance:
Lead spacing: 5 mm ±1%, ±2%, ±2.5%, ±5%, ±10%
• Climatic
category:
55/100/56,
IEC 60068–1
Capacitance
tolerance:
±1%, ±2%,
±2.5%, ±5%, ±10%
• Tape
andcategory:
reel packaging
in accordance
with IEC 60286–2
Climatic
55/100/56,
IEC 60068–1
• RoHS
Compliant
and lead-free
terminations
Tape and
reel packaging
in accordance
with IEC 60286–2
Applications
Overview
• Category
temperature
range of terminations
-55˚C to +100˚C
RoHS Compliant
and lead-free
Film/Foil Polypropylene
(cont.)range of -55˚C to +100˚C
• Category temperature
Typical applications include switching spikes suppression and
The A72 Series is constructed of polypropylene film and metal
or metallized
PFR Series Radial 63 –foil1,000
VDCfilm and metal foil with axial leads of tinned wire. resonant capacitors in switched mode power supply (SMPS),
and deflection circuits in televisions (S-correction and flyback
The
axial
leads
electrically welded
to the
metal to
layer
on the
Capacitance Range: 100 pFLegacy
to 0.022Part
μF •are
Temperature
Range:
−55°C
+100°C
Number System
tuning) as well as applications with high voltage and high current.
ends of the capacitor winding. The capacitor is encapsulated in a
Legacy
Part
Number
Legacytape
Part
Number
System
Not suitable for across-the-line application (see Suppressor
polyester
wrapping
caseSystem
with
thermosetting resin material.
PFR
5
101
J Capacitors). 63
J11
L4
BULK
Two different winding constructions are used depending on
Capacitance
Rated63
Voltage
Lead
and
PFR
5
101
J
J11
L4
BULK
Series
Lead Spacing
Capacitance Code
(pF)
Size Code
Lead Length
voltage
parameters.
Please(mm)
see the Performance
Characteristics
Tolerance
(VDC)
Packaging
Code
Capacitance
Rated Voltage
Lead and
forPolypropylene
more
information.
Series
Lead
Spacing (mm) First
Capacitance
(pF)
Size
Code
Lead
Length
5 (Standard)
two digits Code
indicate
the
F = ±1%
63 = 63
See
Dimension
Letter
"L"
See Ordering
Film Capacitors
A72 Series Polypropylene Film/Foil, Axial
Through-Hole – Pulse & AC
Film/Foil
Polypropylene
Film/Foil
picofarads. The third digit is the
number of following zeros.
picofarads. The third digit is the
5 (Standard)
Benefits
Tolerance
G = ±2%
F = ±1%
H = ±2.5%
G = ±2%
J = ±5%
H = ±2.5%
K = ±10%
J = ±5%
K = ±10%
• Voltage range: 100 – 2,000 VDC
New
KEMETPart
PartNumber
NumberSystem
System
New KEMET
• Capacitance range: 47 pF – 0.33 µF
• Diameter: 5 – 22.5 mm
F
411
J
H
• Length: 11 – 33 mm
Capacitor
F
411
J
Line EMI Suppression
and±10%,
RC Networks
Series ±5%,
Lead
Spacing
(mm)
SizeHCode
•AC
Capacitance
tolerance:
±20%
Class
Capacitor
• Climatic
55/105/56
IEC
Series
Lead
Spacing
Size
Code
FClass
= Film category:
Polypropylene
J =60068-1
5.0 (mm) See
Dimension
• Operating
temperature
Film/Foil range of -55˚C to +105˚C Table
F = Film
Polypropylene
J = 5.0
See Dimension
• RoHS compliance
and lead-free terminations
Film/Foil
Table
Overview
• Self-healing
(VDC)
100 = 100
63 = 63
250 = 250
100 = 100
400 = 400
250 = 250
630 = 630
400 = 400
1000 = 1000
630 = 630
1000 = 1000
101
101Code (pF)
Capacitance
Table
followed by lead
See Dimension
Letter "L"
length in mm
followed by lead
Table
length in mm
J
Packaging Code
Options Table
See Ordering
Options Table
063
C
Capacitance
J
Tolerance
Capacitance
F = ±1%
Tolerance
G = ±2%
F = ±1%
H = ±2.5%
G = ±2%
J = ±5%
H = ±2.5%
K = ±10%
J = ±5%
K = ±10%
Rated063
Voltage
LeadCand
(VDC)
Packaging
Code
Rated
Voltage
Lead and
Capacitance
(pF)
First
two digits Code
indicate
the
063
= 63
See Ordering
(VDC)
Packaging
Code
100 = 100
Options Table
063 = 63
See Ordering
250 = 250
100 = 100
Options Table
400 = 400
250 = 250
is the number
of following
630 = 630
Applications
picofarads.
The third digit
400 = 400
zeros.
1K0 = 1000
630 = 630
zeros.
= 1000
The F871 Series is constructed of metallized polypropylene film
For
worldwide use as electromagnetic1K0
interference
(EMI)
F871 Series Polypropylene Metallized Film, Class X1, 330 VAC
One world.
OneX1
KEMET
suppression filter in across-the-line applications
requiring
safety
encapsulated with self-extinguishing resin in a box of material
KEMET Electronics
Corporation
www.kemet.com
F3036_PFR
• One
4/16/2015
A72 Series Axial 100 –©recognized
2,000
VDC
to UL 94
V–0. • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300
classifi• cation.
Not for use in "series with mains"
type applications.
One world.
KEMET 1
©
Electronics
Corporation • Range:
P.O. Box 5928
• Greenville,
SC 29606 (864) 963-6300 • www.kemet.com
Number
System
Capacitance Range: 47 pF Part
toKEMET
0.33
μF
• Temperature
−55°C
to +105°C
A72ts
Benefi
X1 Class
•
•
•
•
•
•
•
•
•
•
Series
E
F
Rated Voltage (VDC)
1470
Length (mm)
AA
Approvals: ENEC, UL, cUL, CQC
Polypropylene
E = 100
F = 11
Rated
voltage: 330 VAC
50/60 Hz
Film/Foil
I = 250
H= 14
Capacitance range: M
0.001
= 400– 8.2 µF
K = 20.5
P = 630
Q = 28
Lead spacing: 10 – 37.5
mm
Q = 1000
Capacitance tolerance: ±20%, ±10% T = 33
S = 1500
Climatic category 40/110/56,
U = 2000 IEC 60068–1
Tape and reel in accordance with IEC 60286–2
RoHS Compliant and lead-free terminations
Operating temperature range of -40˚C to +110˚C
100% screening factory test at 2,500 VDC
F3036_PFR • 4/16/2015
capacitance value.
added.
00
Lead and
Packaging Code
See Ordering
Options Table
1
J
Internal Use
00, 02 (Standard)
Capacitance
Tolerance
J = ±5%
K = ±10%
M = ±20%
F871 – F873 Series, Halogen Free, Metallized Polypropylene, 330/480/760 VAC
Part
8.2 Number
μF • Temperature
F
871
B
K
104
M
Capacitor Class
Series
Lead Spacing (mm)
Size Code
Capacitance
Tolerance
F = Film
X1, Metallized
Polypropylene
See Dimension
Table
First two digits represent
digit specifies number
of zeros.
A = 10
B = 15
D = 22.5
F = 27.5
R = 37.5
K = ±10%
M = ±20%
F3039_A72_AXIAL • 4/16/2015
1
330
C
Voltage (VAC)
Lead and
Packaging Code
330
See Ordering
Options Table
Lead Spacing
Nominal (mm)
Type of Leads and Packaging
Lead Length
(mm)
Lead and
Packaging
Code
4 +2/-0
17 +0/-1
C
A
H0= 18.5 +/-0.5
L
Standard Lead and Packaging Options
Bulk (Bag)–Short Leads
Bulk (Bag)–Long Leads
Tape & Reel (Standard Reel)
67
Metallized Polypropylene Film EMI Suppression Capacitors
• Tape and reel in accordance with IEC 60286–2
• 100% screening factory test at 2,200 VDC/1,500 VAC
•Benefi
Self-healing
ts properties
R47 Series, Class X1, 440 VAC, 110ºC
(Automotive Grade)
Overview
mains which cannot be loosened without the use of a tool.
Film Capacitors
Through-Hole – Safety/EMI
Applications
X1 Class (cont.)
•The
Approvals:
ENEC,
UL, cUL of metallized polypropylene film
R47 Series
is constructed
For use as a electromagnetic interference (EMI) suppression filter
•encapsulated
Class X1 (IEC
60384-14)
with self-extinguishing resin in a box of material
in across-the-line applications requiring X1 safety classification.
R49 Series, Metallized •meeting
Polypropylene,
310
VAC
Rated the
voltage:
330 VAC
HzV–0.
requirements
of50/60
UL
94
Intended for use in situations where exposure to a shock in the
Number
System
• 2.2
Capacitance
range:
0.047Range:
– 6.8 µF−40°C to +110°C
Capacitance Range: 0.01 toPart
μF
• Temperature
event of capacitor failure is not possible. X1 classified capacitors
• Lead spacing:
– 37.5are
mmavailable (up to 22.5 mm Lead
Automotive
Grade15.0
devices
are for use only in a permanently connected apparatus with a
•AC
Capacitance
tolerance:
±20%,
M use of
A and ±10%
I Electronics
3100connection to mains00which cannot be01
LineR49
EMI
Suppression
RC
Networks
Spacing)
and meet
the demanding
Automotive
loosened without the
•Council's
ClimaticAEC–Q200
category: 40/110/56,
IEC
60068–1
Rated
Lead Spacing
Lead and
Capacitance
qualifiVoltage
cation requirements.
a tool.
Internal Use
• TapeSeries
and reel in accordance
(VAC) with IEC 60286–2
(mm)
Packaging Code
Tolerance
• RoHS
Compliant and lead-free
X1, Metallized
A = 310 terminations
F = 10.0
See Ordering
01
K = ±10%
Polypropylene
I = 15.0
Options Table
M1
M = ±20%
• Operating
temperature range of -40˚C to +110˚C
N = 22.5 VAC
capacitance value.
•Benefi
100% screening
factory test at 2,200 VDC/1,500
ts
R = 27.5
• Self-healing properties
Overview
Applications
added.
• Approvals: ENEC, UL, cUL
• Class X1 (IEC 60384-14)
The P278 Series is constructed of multilayer metallized paper
Typical applications include worldwide use as an electromagnetic
• Rated voltage: 440 VAC 50/60 Hz
encapsulated and impregnated in self-extinguishing material
interference suppressor in all X1 and across-the-line applications.
R49 Series, Metallized •meeting
Polypropylene,
330 VAC
Capacitance range: 0.0047
– 2.2 µF
the requirements of UL 94 V–0.
•Part
Lead
spacing:
10.0
– 37.5 mm
6.8Number
μF
• Temperature
System
•© KEMET
Capacitance
tolerance:
±20%,
• P.O.±10%
Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3098_R49_X1_310 • 4/16/2015
1
• Climatic
00
M
R49category: 40/110/56,
A IEC 60068–1N
3150
B1
• Tape and reel in accordance
with IEC Lead
60286–2
Rated Voltage
Spacing
Lead and
Capacitance
Benefi
ts
Series
Internal Use
• RoHS
terminations
(VAC)
(mm)
Packaging Code
Tolerance
•• Operating
temperature
range
of
-40˚C
to
+110˚C
X1,
Metallized
A
=
330
I
=
15.0
Digits
2
–
4
indicate
the
See
Ordering
A1
K = ±10%
Approvals: ENEC, UL, cUL
Polypropylene
N = 22.5 VAC first three digits of the
Options Table
A2
M = ±20%
•• 100%
screening
factory
at 2,700
Rated
voltage: 480
VAC test
50/60
Hz VDC/1,700
capacitance value.
R = 27.5
A3
•• Self-healing
Capacitanceproperties
range: 0.001 – 0.15 µF
W = 37.5
B1
•• Automotive
(AEC–Q200)
B2
Lead spacing:
10.2 – 25.4grades
mm available up to
mm Leadtolerance:
Spacing ±20%
added.
• 22.5
Capacitance
P278 Series Metallized Impregnated Paper,
Class X1, 480 VAC
R47 Series, Metallized Polypropylene,
440 VAC
Grade)
• Tape and reel in accordance
with(Automotive
IEC 60286–2
System
Capacitance Range: 0.0047Part
2.2Number
μF
• Temperature
Range:
−40°C to +110°C
• toRoHS
Compliant
and lead-free
terminations
4 • P.O.
I
2100
00
Box 5928
• Greenville,
SC 29606 (864)
•© KEMET
100%R47
screening
factory test
at 2,700
VDC
• Highest possible safety
and
passive
Ratedregarding
Voltage active
Lead and
Lead
Spacing
Series
(VAC)
(mm)
Packaging Code
flammability
X1, Metallized
4 = 440
F = 10.0long life even
See Ordering
• Excellent
self-healing properties
which ensure
Polypropylene
Options Table
when
subjected to frequent over voltagesI = 15.0
N = 22.5
capacitance value.
• Good resistance to ionization due to impregnated
R = 27.5 paper First digit indicates the
dielectric
W = 37.5
• Impregnated paper ensures excellent stability and reliability added.
properties, particularly in applications with continuous operation
P278 Series, Metallized Impregnated Paper, 480 VAC
Part
0.15Number
μF • Temperature
Internal Use
A1
A2
A3
1
Capacitance
Tolerance
K = ±10%
M = ±20%
P
278
H
E
102
M
Capacitor Class
Series
Lead Spacing
(mm)
Size Code
P = Paper
X1, Metallized
Paper
See Dimension
Table
zeros.
H = 10.2
Q = 15.2
C = 20.3
S = 22.5
E = 25.4
A1
M
F3099_R49_X1_330
• 4/16/2015
F3097_R47_X1_440 • 4/16/2015
480
A
Capacitance
Tolerance
Rated Voltage
(VAC)
Lead and
Packaging Code
M = ±20%
480 = 480
See Ordering
Options Table
1
68
F3087_P278_X1_480 • 4/16/2015
1
• Approvals: ENEC, UL
self-healing
properties
•• Excellent
Rated voltage:
300 VAC
50/60 Hzwhich ensure long life even
subjected
to frequent
over-voltages
• when
Capacitance
range:
0.01 – 0.22
µF
•• Good
resistance
to ionization
Lead spacing:
15.2
– 25.4 mmdue to impregnated paper dielectric
•• High
dV/dt capability
Capacitance
tolerance: ±20% for C ≤ 0.1 µF, ±10% for C > 0.1 µF
•• Impregnated
paper40/110/56/B,
ensures excellent
stability and reliability
Climatic category:
IEC 60068–1
particularly
in in
applications
with
continuous
operation
• properties,
Tape and reel
packaging
accordance
with
IEC 60286–2
Film Capacitors
X1 Class (cont.) •Metallized
Polypropylene
Film
Capacitors
• 100% screening
factory test
at EMI
2,150Suppression
VDC
Metallized
Polypropylene
Film
EMI
Suppression
Capacitors
Highest possible safety
regarding
active and passive
P410 Series, Metallized• Impregnated
Paper
300 VAC
fl
ammability
Part
0.1Number
μF • Temperature
PHE844 Series, Class X1, 440/480 VAC, 105°C
PHE844 Series, Class X1, 440/480 VAC, 105°C
P
410
Q
Overview
Capacitor
Lead
Spacing
Overview Series
M
223
Size Code
M
Applications
Capacitance
Applications
300
A
H101
Rated Voltage
Lead and
Resistance (Ω)
Packaging(EMI)
Code suppression
Tolerance
(VAC) interference
For use as
a electromagnetic
(mm)of metallized polypropylene
The Class
PHE844
Series is constructed
PME271
E
(D)
510(0)
M
R30
PHE844
Series
is self-extinguishing
constructed
of metallized
as=a±20%
electromagnetic
(EMI)
suppression
P=
RC Snubber
Q = 15.2
two digits represent
M
300
= 300interference
See
Ordering
H + first two digits
fiThe
lm encapsulated
with
resinSee
in polypropylene
a box First
of material
fiFor
lteruse
in across-the-line
applications
requiring
X1 safety
Capacitance
Lead
and
C 94
= 20.3
Dimension
cant figures. Capacitance
Options
Table
representing
filmMetallized
encapsulated
with self-extinguishing
in a Spacing
box signifi
of material
fiThird
lter in cation.
across-the-line
applications
requiring
X1 safety
Series
Rated
Voltage
(VAC)resin
Lead
(mm)
Code
(pF)
meeting
the requirements
of UL
V–0.
classifi
Suitable
for use inTolerance
situations
where
failure
ofCode
the
Packaging
Paper
E = 25.4
Table
significant
meeting the requirements of UL 94 V–0.
classifi
cation.
Suitable
fortouse
in situations
where
failure
of the
capacitor
would
not lead
danger
of electric
shock.
zeros.
fi
gures.
Third
X1, Metallized Paper
E = 300
Blank = Standard
Digits 2 – 4(3) indicates the first
M = ±20% (for C ≤
See Orderingdigit
capacitor
would
not lead to danger
of electric shock.
specifiesTable
number
D = 22.5
three
digits of the
capacitance
0.1 µF)
Options
value. First digit indicates the total
number of digits in the capacitance
value.
Benefits
Benefits
K = ±10% (for C >
0.1 µF)
PME271E Series, Metallized
Impregnated
• Approvals:
ENEC, UL, cULPaper, 300 VAC
©0.22
KEMET
Electronics
Corporation
• P.O. Box
5928
• Greenville,
SC 29606 (864) 963-6300 • www.kemet.com
KEMET
Part
System
Capacitance Range: 0.01 toNew
μF
Temperature
−40°C
to +110°C
Approvals:
ENEC,
UL,Number
cULRange:
• Class
X1•(IEC
60384-14)
PHE844 Series,
of zeros.
F3090_P410_X1_300 • 4/16/2015
1
Class X1
(IEC 60384-14)
• Rated
Voltage:
440 VAC 50/60 Hz (ENEC), 480VAC
P Hz
277 VAC 50/60 HzQ(ENEC), 480VAC
E
103
M
300
A
• 50/60
Rated
Voltage:
440
(UL, cUL)
Capacitance
Rated
Voltage
Lead
and
Capacitor
Hz (UL,range:
cUL)
• 50/60
Capacitance
Series0.1 – 2.2
LeadµF
Spacing (mm)
Size Code
Tolerance
(VAC)
Packaging Code
Class
• Capacitance
range:
0.1
–
2.2
µF
Lead spacing: 22.5 – 37.5 mm
P = Paper
X1,
Metallized
= 15.2
See Dimension First two digits indicate the M = ±20% (for C
300 = 300
See Ordering
Lead
spacing:
22.5
– 37.5
mm Q±10%
• Capacitance
tolerance:
±20%,
Paper
C = 20.3
Table
≤ 0.1 µF)
Options Table
Capacitance
tolerance:
±20%, S±10%
• Climatic
category
40/105/56/B,
IEC
60068-1
= 22.5
of the capacitance value in K = ±10% (for C >
Climatic
40/105/56/B,
60068-1
• Tape
andcategory
reel in accordance
with
60286-2
EIEC
= IEC
25.4
0.1 µF)
Tape and
reel in accordance
with
IEC 60286-2
• RoHS
Compliant
and lead-free
terminations
zeros.
• RoHS
Compliant
and lead-free
Operating
temperature
range ofterminations
-40˚C to +105˚C
Operating
temperature
-40˚CVDC
to +105˚C
• 100%
screening
factoryrange
test atof3,000
100% screening
factory test• P.O.
at 3,000
VDC
•© KEMET
Self-healing
properties
Electronics
Corporation
Box 5928
• Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3014_PME271E_X1_300 • 4/16/2015
1
Metallized
Polypropylene,
440/480 VAC
• Self-healing
properties
Capacitance Range: 0.1 to 2.2 μF • Temperature Range: −40°C to +105°C
Legacy
LegacyPart
PartNumber
NumberSystem
System
PHE844
PHE844
Series
Series
X1, Metallized
Polypropylene
X1, Metallized
Polypropylene
Rated Voltage (VAC)
Rated Voltage (VAC)
R = 440
R = 440
D
D
Lead Spacing (mm)
Lead Spacing (mm)
D = 22.5
27.5
DF == 22.5
R
37.5
F == 27.5
R = 37.5
6100
6100
M
R06L2
M
Capacitance
Tolerance
Capacitance
Tolerance
K = ±10%
M
±20%
K == ±10%
M = ±20%
Digits 2-4 indicate the first three digits of
capacitance
Digits 2-4the
indicate
the firstvalue.
three digits of
First digittheindicates
the total
number of
capacitance
value.
in the capacitance
value of
Firstdigits
digit indicates
the total number
digits in the capacitance value
R06L2
Lead
and
Packaging
Code
Lead and
Packaging
Code
See Ordering
Options
Table
See Ordering
Options Table
New KEMET
New
KEMETPart
PartNumber
NumberSystem
System
F
F
Capacitor
Class
Capacitor
FClass
= Film
F = Film
R
R
844
844
Series
Series
X1, Metallized
Polypropylene
X1, Metallized
Polypropylene
D
D
Lead Spacing
Lead(mm)
Spacing
D (mm)
= 22.5
27.5
DF == 22.5
R
37.5
F == 27.5
R = 37.5
H
H
Size Code
Size Code
See
Dimension
See
Table
Dimension
Table
104
104
First two digits indicate the two
most
signifi
cant
digits the
of the
First
two
digits
indicate
two
capacitance
in picofarads.
most signifivalue
cant digits
of the
The third digit
is the
number of
capacitance
value
in picofarads.
following
The third
digit is zeroes.
the number of
following zeroes.
M
M
Capacitance
Tolerance
Capacitance
Tolerance
K = ±10%
M
±20%
K == ±10%
M = ±20%
440
Rated440
Voltage
(VAC)
Rated
Voltage
(VAC)
440
= 440
440 = 440
C
LeadCand
Packaging
Code
Lead and
Packaging
Code
See Ordering
Options
Table
See Ordering
Options Table
One world.• One
KEMET 1
F3108_PHE844_X1_440-480
4/16/2015
F3108_PHE844_X1_440-480 • 4/16/2015
1
69
• Rated
Voltage:
760VAC 50/60Hz
Class X1
(IEC 60384-14)
• Capacitance
range:
0.0150/60Hz
– 1.0 µF
Rated Voltage:
760VAC
• Lead
spacing:range:
22.5 –0.01
37.5–mm
Capacitance
1.0 µF
• Capacitance
±20%,
22.5 – 37.5
mm ±10%
• Climatic
category
40/105/56/B,
IEC 60068-1
Capacitance
tolerance:
±20%, ±10%
• Tape
andcategory
reel in accordance
with
60286-2
Climatic
40/105/56/B,
IECIEC
60068-1
• RoHS
Compliant
and lead-free
terminations
Tape and
reel in accordance
with
IEC 60286-2
• Operating
temperature
-40˚C to +105˚C
RoHS Compliant
and lead-free
•
100%
screening
factory
test
at
4,250
Operating
temperature
range
of
-40˚CVDC
to +105˚C
X1 Class (cont.)
• Self-healing
properties
100% screening
factory test at 4,250 VDC
AC
Line
EMI Suppression
Networks
PHE845 Series, Metallized
Polypropylene,
760RCVAC
• Self-healing
properties and
Film Capacitors
Capacitance Range: 0.01 toF861
1.0 μF Series
• Part
Temperature
Range:
−40°C
to +105°C
Legacy
Number
System
Metallized
Polypropylene
Film, Class X2, 310 VAC
Legacy
LegacyPart
PartNumber
NumberSystem
System
PHE845
PHE845
Overview
Series
V
V
Rated Voltage (VAC)
D
D
5100
Lead Spacing (mm)
AC Line EMI Suppression and RC Networks
5100
Applications
M
R06L2
M
Capacitance
Tolerance
Capacitance
R06L2
Lead
and
Packaging
Code
Lead and
Series
Rated Voltage (VAC) Lead Spacing (mm)
Code (pF)
The X1,
F861
of metallized polypropylene
fiDigits
lm 2-4Capacitance
For usetheas
electromagnetic
suppression
Tolerance
Packaging
Code
Metallized
V = 760
D = 22.5
indicate
first
three digits of interference
K = ±10%(EMI) noise
See
Ordering
Polypropylene
F
=
27.5
the
capacitance
M
±20%X2 safety classifi
Options
Table
encapsulated
with self-extinguishing
resin in a Dbox
of materialDigits 2-4 indicate
in across-the-line
requiring
cation
X1, Metallized
V = 760
= 22.5
the firstvalue.
threeapplications
digits of
K == ±10%
See Ordering
R
37.5
First digittheindicates
the total
of
Polypropylene
F == 27.5
capacitance
±20%
Options
Table
meeting
according
tovalue.
IECnumber
60384-14.
Not M
for= use
in "series with
mains"
and
in the capacitance
value of
R = 37.5
Firstdigits
digit indicates
the total number
F862 Series Metallized Polypropylene Film for Harsh
Environmental Conditions, Class X2, 310 VAC (Automotive Grade)
as AC Power filtering type applications.
digits in the capacitance value
New
KEMET
Part
Overview
New
KEMET
PartNumber
NumberSystem
System
Benefi
ts
New KEMET
Part Number System
Applications
The F862
of metallized
polypropylene
Typical
in series with theC
F Series is constructed
845
D
D
103 applications include
M connection760
ENEC,
UL, cUL, CQC
fi• lmApprovals:
encapsulated
with
mains,
supplies
and
energy
with
F
845self-extinguishing
D resin in a Dbox material
103 capacitive power
M
760
Cand
Capacitance
Rated
Voltagemeters,Lead
Lead Spacing
Capacitor
Size Code
Capacitance
Code
(pF)
Series
• Rated
voltage:
310
VAC
50/60
Hz
recognized
by
UL
94
V–0.
The
F862
Series
is
ideal
for
harsh
special
emphasis
in
automotive
applications
for
severe
ambient
Tolerance
(VAC)
Code
Class
Capacitor
Lead(mm)
Spacing
Capacitance
Rated
Voltage Packaging
Lead
and
Series
Size Code
Capacitance
Code (pF)
•environmental
Capacitanceconditions
range:
0.01and
– 4.7
µF the demanding
meets
conditions.
Tolerance
(VAC)
Packaging
Code
FClass
= Film
X1, Metallized
D (mm)
= 22.5
SeeAutomotive
First two digits
indicate the two
K = ±10%
760
= 760
See Ordering
•Electronics
Lead spacing:
7.5 –AEC–Q200
37.5 mm qualifi
Polypropylene
27.5cation requirements.
Dimension
most
signifi
cant
digits the
of the
M
±20%
Options
Table
F = Film Council's
X1, Metallized
DF == 22.5
See
First
two
digits
indicate
two
K == ±10%
760 = 760
See Ordering
±20%, ±10%
R
37.5
Table
capacitance
in picofarads.
Polypropylene
F == 27.5
Dimension
most signifivalue
cant digits
of the
M = ±20%
Options Table
The third digit
is the
number of
• Climatic category: 40/110/56, IEC
R =60068–1
37.5
Table
capacitance
value
in picofarads.
following
zeroes.
The
third
digit
is
the
number of
following zeroes.
Benefi
ts temperature range of -40˚C to +110˚C
• Operating
X2 Class
• KEMET
100% screening
factory test• P.O.
at 1,900
VDC
©
Box 5928
F3109_PHE845_X1_760
4/16/2015
One world.• One
KEMET 1
• Approvals: ENEC, UL, cUL, CQC
F3109_PHE845_X1_760 • 4/16/2015
1
Rated voltage: 310 VAC
50/60310
Hz VAC
F861 Series Metallized• Polypropylene
Film,
Number
System
•4.7
Capacitance
range:
0.1 –Range:
4.7 µF −40°C to +110°C
Capacitance Range: 0.01 –Part
µF
• Temperature
F
861±20%, ±10% B
C
104
M
310
C
• Capacitance
tolerance:
• Climatic category: 40/110/56, IEC 60068-1
Lead and
Capacitance
Voltage (VAC)
Capacitor Class
Series
Lead Spacing (mm)
Size Code
Packaging Code
Tolerance
• Tape and reel in accordance with IEC 60286-2
F = Film
K = 7.5
See Dimension
First two digits
K = ±10%
310
See Ordering
• RoHS
Compliant X2,
andMetallized
Polypropylene
A = 10 to +110˚C
Table
represent significant
M = ±20%
Options Table
range of -40˚C
B = 15
figures. Third digit
• 100% screening factory test at 1,900
VDC
D = 22.5
specifies number of
• Qualification based on AEC-Q200F =guidelines
27.5
zeros.
R = 37.5
F862 Series, Metallized Polypropylene for Harsh Environmental Conditions, 310 VAC (Automotive
Grade)
Lead and
Lead
Spacing
Part
System
4.7Number
μF
• Temperature
−40°C
to +110°C
Type ofRange:
Leads and
Packaging
Nominal (mm)
F
Capacitor Class
F = Film
7.5
862
B
C
Lead Length
(mm)
104
Packaging
Code
M
Standard Lead and Packaging Options
Lead Spacing
Capacitance
Size Code
Code (pF) C
Series Bulk (Bag) – Short Leads
4Capacitance
+2/-0
(mm)
Tolerance
Bulk (Bag) – Long Leads
17 +0/-1
A
X2, Metallized
B = 15
See Dimension First two digits represent
K = ±10%
Tape & Reel (Standard Reel)
H0= 18.5 +/-0.5
L
Polypropylene
D = 22.5
Table
M = ±20%
F = 27.5Options
Other Lead and Packaging
of zeros.
Bulk (Bag) – Max Length Leads
20 +5/-0
ALL0L
Ammo Pack
H0= 18.5 +/-0.5
R
310
C
Voltage (VAC)
Lead and
Packaging Code
310
See Ordering
Options Table
F3001_F861_X2_310 • 4/16/2015
F3092_F862_X2_310 • 4/16/2015
1
70
1
Automotive
Grade
devices±20%,
are available
• Capacitance
tolerance:
±10% (up to 22.5 mm Lead
Spacing)
meet the
demanding
• Climaticand
category:
40/110/56,
IECAutomotive
60068–1 Electronics
Council's
AEC–Q200
qualification
• Tape and
reel in accordance
withrequirements.
IEC 60286–2
•Metallized
RoHS Compliant
and lead-free
terminations
Polypropylene
Film EMI
Suppression Capacitors
• 100% screening factory test at 2,200 VDC/1,500 VAC
Benefi
ts properties
• Self-healing
• Automotive (AEC–Q200) grades available up to
X2 Class (cont.) •Overview
Approvals:
ENEC,
UL, cUL
Applications
22.5
mm Lead
Spacing
• Class X2 (IEC 60384-14)
R47 Series, Metallized The
440
VAC
(Automotive
Grade)
•Polypropylene,
Rated
VAC
50/60
R46 voltage:
Series is520
constructed
of Hz
metallized
polypropylene
film
For worldwide use in electromagnetic interference (EMI)
to
2.2
μF
•
Temperature
Range:
−40°C
to
+110°C
Number
System
• Capacitancewith
range:
0.0047 – 2.2 µF
encapsulated
self-extinguishing
resin in a box of material
suppression in across-the-line applications requiring X2 safety
• Lead spacing:
10.0 – 37.5
meeting
the requirements
of mm
UL 94 V–0.
classification. Intended for use in situations where capacitor
R47
4
F
1470failure would not result
00 in exposure to01electric shock. NotMfor use
• Capacitance
tolerance: ±20%,
±10%
Lead and
Capacitance
in "series with mains"
type applications.
Internal Use
Series
Packaging Code
Tolerance
X2,
Metallized
4
=
440
F
=
10.0
Digits
2
–
4
indicate
the
See
Ordering
01
K = ±10%
Polypropylene
= 15.0
Options Table
02
M = ±20%
• Operating
temperature range of -40˚C to I+85˚C
N = 22.5
capacitance value.
03
•Metallized
100% screening
factory test
at EMI
2,200Suppression
VDC/1,500
Polypropylene
Film
Capacitors
R = 27.5 VAC
•Benefi
Self-healing
W = 37.5
ts properties
added.
mm Lead
Spacing
• 22.5
Approvals:
ENEC,
UL, cUL, CQC
• Class X2 (IEC 60384-14)
Applications
•Polypropylene,
50/60
Hz 85ºC (Automotive Grade)
R47 Series, Metallized Overview
520
VAC,
•
Capacitance
range:
0.01
–
10
µF
Part
Number
System
The
R46 Electronics
of metallized polypropylene film
For worldwide use in electromagnetic
interference (EMI)
©
Corporation
F3096_R47_X2_440 • 4/16/2015
1
• KEMET
Lead spacing:
10.0
– 37.5 mm
suppression in across-the-line applications requiring X2 safety
• Capacitance
tolerance: ±20%,
±10%
R47
5
I
2100
00
01
M
Capacitance
Lead and
failure
to electric
Internal
Use shock. Not for use
Series
Rated
Voltage
(VAC)
Lead
Spacing
(mm)
Capacitance
Code
(pF)would not result in exposure
Tolerance
Packaging Code
in "series with mains" type applications.
• RoHS
Compliant and 5lead-free
terminations
X2, Metallized
= 520
F = 10.0
See Ordering
01
K = ±10%
Polypropylene
= 15.0
Options Table
02
M = ±20%
• Operating
temperature range of -40˚C to I+110˚C
N = 22.5 VAC capacitance value.
03
• 100% screening factory test at 2,200 VDC/1,500
R = 27.5
W = 37.5
Film Capacitors
R46 Series, Class X2, 310 VAC, 110ºC
R46 (Miniature) Series, Class X2, 275 VAC, 110ºC
added.
Benefits
Approvals: ENEC, UL, cUL, CQC
R46 Series, Metallized •Polypropylene,
310 VAC
• Class X2 (IEC 60384-14)
• Capacitance range: 0.033 – 10 µF
R46
3
N
3150
00
Rated Voltage
Lead Spacing
Lead and
• Capacitance
tolerance: ±20%, ±10%
Series
(VAC)
(mm)
Packaging Code
X2, Metallized
3 = 310
F = 10.0
See Ordering
Polypropylene
I = 15.0
Options Table
N = 22.5
capacitance value.
= 27.5
• Operating temperature range of -40˚C to R+110˚C
W = 37.5 VAC number of zeros to be
• 100% screening factory test at 2,200 VDC/1,500
added.
Number
System
10 μF
• Temperature
F3008_R47_X2_520 • 4/16/2015
01
M
Internal Use
Capacitance
Tolerance
01
02
L2
M1
M2
N0
N1
N2
1
K = ±10%
M = ±20%
R46 (Miniature) Series, Metallized Polypropylene, 275 VAC
Part
10 Number
μF • Temperature
R46
K • P.O. Box 5928 • Greenville,
I
3470
00
© KEMET
SC 29606 (864)
Series
X2, Metallized
Polypropylene
Rated Voltage
(VAC)
K = 275
Lead Spacing
(mm)
F = 10.0
I = 15.0
N = 22.5
R = 27.5
W = 37.5
capacitance value.
added.
P0
M
F3095_R46_X2_310_110C
• 4/16/2015
Lead and
Packaging Code
See Ordering
Options Table
Internal Use
P0
P1
P2
P3
1
Capacitance
Tolerance
K = ±10%
M = ±20%
F3094_R46_X2_275_110C_MIN • 4/16/2015
711
PME264
Metallized
Impregnated Paper,
Class
X2,Series
660
VAC
40/125/56,
IEC 60068–1
VACwith IEC 60286–2
•Class
Tape andX2,
reel in660
accordance
X2 Class (cont.)
•Overview
•Overview
100% screening factory test at 2,200 VDC/1,500 VAC
The
PME264 Series
is constructed of multilayer metallized paper
• Self-healing
properties
encapsulated
and
impregnated
in self-extinguishing
materialpaper
The PME264 Series is constructed
of multilayer metallized
meeting the requirements
of ULin94self-extinguishing
V–0.
encapsulated
and impregnated
material
R46 Series, Metallized Polypropylene, 275 VAC, 125ºC
Number
System
1 μF
• Temperature
Range:
−40°C
to +125°C
AC
Line
EMI Suppression
and RC
Networks
Film Capacitors
Applications
Through-Hole
Applications
– Safety/EMI
Typical applications include worldwide use in electromagnetic
interference
suppression
in all
X2 and across-the-line
include
worldwide
use in electromagnetic
applications.suppression
These capacitors
areand
alsoacross-the-line
for use in high AC
interference
in all X2
and
DC voltage
applications
such
commutator
capacitor
applications.
These
capacitors
areas
also
for use in high
AC in
converters
and
ignition
circuits.
and DC voltage applications such as commutator capacitor in
converters and ignition circuits.
P409
Series Metallized
Impregnated
Paper
BenefiR46
ts
K
N
3220
Rated
Voltage
Lead Spacing
Benefi
ts
Class
X2,
275
VAC
Series
• Approvals:
ENEC, UL, cUL
(VAC)
(mm)
00
Lead and
Packaging Code
H1
M
Internal Use
Capacitance
Tolerance
•• Rated
voltage:
660UL,
VAC
X2, Metallized
KcUL
=50/60
275 Hz
F = 10.0
See Ordering
H = High
K = ±10%
Approvals:
ENEC,
Polypropylene range: 0.001 – 0.1 µF
I = 15.0
Options Table
Temperature
M = ±20%
•• Capacitance
Rated
voltage:
660
VAC
50/60
Hz
Overview
N = 22.5
capacitance Applications
value.
H1
•• Lead
spacing:range:
15.2 –0.001
25.4 –mm
Capacitance
0.1 µF
H2
•The
Capacitance
tolerance:
±20%
number of zeros
to be applications include worldwide
H3use in contact protection,
P409
Series15.2
is constructed
• Lead
spacing:
– 25.4 mmof multilayer metallized paper
Typical
•encapsulated
category:
40/85/56,
60068–1
added.
and
impregnated
material
• Climatic
Capacitance
tolerance:
±20%IEC
contact interference suppression andH4transient suppression.
•meeting
and
reel
in accordance
with
IEC 60286–2
thecategory:
requirements
of ULIEC
94 60068–1
V–0.
• Tape
Climatic
40/85/56,
•• RoHS
Compliant
and lead-free
terminations
Tape and
reel in accordance
with
IEC 60286–2
• RoHS
PME264 Series Metallized
Impregnated
Paper,terminations
660 VAC
0.1 μF Part
• Temperature
Legacy
Number Range:
System−40°C to +85°C
Benefi
Legacy
LegacytsPart
PartNumber
NumberSystem
System
PME264
N
B
5100
M
R30KEMET
One world. One
• KEMET
Approvals:
ENEC,
UL, cUL• P.O.
Capacitance
Lead
©
Electronics
Corporation
Box 5928 • Greenville, B
SC 29606 (864) 963-6300 • www.kemet.com
F3006_R46_X2_275_125C
• 4/16/2015
1
PME264
N
5100
M
R30and
Series
Rated Voltage (VAC)
Lead Spacing (mm)
Tolerance
Packaging Code
Capacitance
Lead and
Series Paper
Rated –N
Voltage
(VAC)
Lead Spacing
Capacitance
Code (pF)
Metallized
= 660µF
B = 15.2(mm)
Digits
2 – 4(3) indicates
the first
M
= ±20%
See Ordering
• X2,
Capacitance
range: 0.047
0.47
Tolerance
Packaging
Code
C
=
20.3
three
digits
of
the
capacitance
Options
Table
• X2,
Capacitance
tolerance: ±20%
Metallized Paper
N = 660
B
=
15.2
Digits
2
–
4(3)
indicates
the
fi
rst
M
=
±20%
See
Ordering
E = 25.4
value. First digit indicates the
• Resistance range: 22 – 470 Ω
C = 20.3
three
of the
capacitance
Options Table
totaldigits
number
of digits
in the
E
=
25.4
value.capacitance
• Resistance tolerance: ±30%
value. the
total number of digits in the
capacitance value.
• Climatic category: 40/085/56/B, IEC 60068–1
•New
TapeKEMET
and reel packaging
in accordance
with IEC 60286–2
Part
System
New
KEMET
PartNumber
Number
System
• Operating
temperature
P
264 range of -40˚C
Q to +85˚C E
103
M
660
A
• Excellent
self-healing properties which ensure long life even
Capacitor
Capacitance
Rated
Voltage
Lead
P
264
Q (mm)
103Code (pF)
M
660
Aand
Series
Lead Spacing
SizeECode
Capacitance
when
Classsubjected to frequent over voltages
Tolerance
(VAC)
Packaging Code
Capacitor
Capacitance
Rated Voltage
Lead and
• Good
resistance
to ionization
impregnated
paper
Leaddue
Spacing
(mm) See
Size
Code dielectric
Capacitance
(pF)
P =Class
Paper
X2, Series
Metallized
Q =to15.2
Dimension
First
two digits Code
indicate
the
M
= ±20%
660
= 660
See Ordering
Tolerance
(VAC)
Packaging
Code
• High dV/dt capability
Paper
C = 20.3
Table
Options Table
P = Paper
X2, Metallized
Q
= 25.4
15.2
See Dimension of
First
two
digits indicate
the
M = ±20%
660 = 660
See Ordering
E
=
the
capacitance
value
in
• Impregnated paper
ensures excellent
stability andTable
reliability two most significant digits
Paper
C = 20.3
Options Table
properties, particularly in applications
E = 25.4with continuous operation
ofis the
value in
the capacitance
number of following
picofarads.
The third digit
zeros.
zeros.
P409 Series Metallized ©Polypropylene,
275 VAC
F3012_PME264_X2_660 • 4/16/2015
One world. One KEMET 1
Part
System
0.47Number
μF
• Temperature
−40°C
to +85°C
© KEMET
Electronics
P.O. Box 5928
• Greenville,
SC 29606 (864) 963-6300 • www.kemet.com
P
Capacitor
Class
P=
Metallized
Paper
409
Q
Series
Lead Spacing
(mm)
RC Snubber
Q = 15.2
C = 20.3
E = 25.4
M
473
M
Size Code
Capacitance
Tolerance
See
Dimension
Table
zeros.
F3012_PME264_X2_660 • 4/16/2015
275
A
Rated Voltage
Lead and
(VAC)
Packaging Code
M = ±20%
275 = 275
See Ordering
Options Table
1
H470
Resistance (Ω)
representing
significant
specifies number
of zeros.
72
F3089_P409_X2_275 • 4/16/2015
1
P295
Series
Metallized
Impregnated Paper,
• Rated voltage:
275 VAC
50/60 Hz
• Capacitance range: 0.001 - 0.6 µF
Class
Y1, 500 VAC
Film Capacitors
• Capacitance tolerance: M = ±20% (for C ≤ 0.1 µF), K = ±10%
(for C > 0.1 µF)
Overview
The
P295Compliant
multilayer metallized paper
• RoHS
and lead-freeofterminations
encapsulated
and impregnated
range in
of self-extinguishing
-40˚C to +110˚C material
meeting
the
requirements
of
UL
94
V–0.VDC
X2 Class (cont.)
PME271M Series Metallized Impregnated Paper, 275 VAC
Series
Y1 Class
Typical applications include safety capacitors for bridging of
double or reinforced insulation applications requiring voltage test
up to 4,000 VAC at 60 seconds. P295 Series capacitors can be
left in place during this test.
Legacy Part
Legacy
PartNumber
NumberSystem
System
PME271
Benefi
ts
Applications
M
(B)
Rated Voltage (VAC)
Lead Spacing (mm)
610(0)
M
R30
Capacitance
Tolerance
Lead and
Packaging Code
• X2,
Rated
voltage:
500 VAC 50/60
Hz
Metallized
Paper
M = 275
Blank = Standard
Digits 2 – 4(3) indicates the first
M = ±20%
See Ordering
A = 10.2
three digits of the capacitance
(for C ≤ 0.1 µF)
Options Table
• Capacitance range: 470 – 4,700 pF
B = 15.2
value. First digit indicates the
K = ±10%
• Lead spacing: 15.0 mm
D = 22.5
(for C > 0.1 µF)
• Capacitance tolerance: ±20%
capacitance value.
New
Part
System
•New
TapeKEMET
and reel packaging
in accordance
with IEC 60286–2
KEMET
PartNumber
Number
System
• Operating
temperature
P
276 range of -40˚C
Q to +115˚C E
104
M
275
A
• 100%
screening factory test at 4,000 VAC, 50 Hz, 2 seconds
Capacitor
Capacitance
Rated Voltage
Lead and
Series
Lead Spacing (mm)
Size Code
Class possible safety regarding active and passive
Tolerance
(VAC)
Packaging Code
• Highest
flPammability
= Paper
X2, Metallized
H = 10.2
M = ±20%
275 = 275
See Ordering
Paper propertiesQensure
= 15.2 long life even
Table when two most significant digits
(for C ≤ 0.1 µF)
Options Table
• Excellent self-healing
C = 20.3
K = ±10%
subjected to frequent over voltages
S = 22.5
(for C > 0.1 µF)
• Good resistance to ionization due
impregnated dielectric is the number of following
E =to
25.4
zeros.
• Impregnated paper provides excellent stability and reliability
F3011_PME271M_X2_275 • 4/16/2015
1
P295 Series Metallized Impregnated Paper, 500 VAC
4,700Number
pF • Temperature
P
Capacitor
Class
P = Paper
295
B
Series
Lead Spacing
(mm)
Y1, Metallized
Paper
B = 15.0
E
471
M
500
A
Size Code
Capacitance
Tolerance
Rated Voltage
(VAC)
Lead and
Packaging Code
See
Dimension
Table
First two digits indicate the two
most significant digits of the
capacitance value in picofarads.
The third digit is the number of
following zeros.
M = ±20%
500 = 500
See Ordering
Options Table
F3088_P295_Y1_500 • 4/16/2015
1
73
Y1 Class (cont.)
• Rated
voltage:
440UL,
VAC/480
Approvals:
ENEC,
cUL VAC 50/60 Hz
• Capacitance
range:
470
– 4700VAC
pF 50/60 Hz
Rated voltage: 440 VAC/480
• Capacitance
Lead spacing:
15.0 470
mm – 4700 pF
range:
• Capacitance
15.0 mm ±20%
• Climatic
category:
40/115/56/B,
Capacitance
tolerance:
±20% IEC 60068–1
• Tape
andcategory:
reel packaging
in accordance
with IEC 60286–2
Climatic
40/115/56/B,
IEC 60068–1
• RoHS
Compliant
and
lead-free
terminations
Tape and reel packaging in accordance with IEC 60286–2
• Operating
temperature
-40˚C to +115˚C
RoHS Compliant
and lead-free
• 100%
screening
factoryrange
test atof4,000
50 Hz, 2 seconds
Operating
temperature
-40˚CVAC,
to +115˚C
• 100% screening factory test at 4,000 VAC, 50 Hz, 2 seconds
Film Capacitors
PME295 Series Metallized Impregnated Paper, 440 VAC/480 VAC
Capacitance Range: 470 toLegacy
4,700 pFPart
• Temperature
Number System
AC
Line
EMI
Suppression
and
RC Networks
Legacy
LegacyPart
PartNumber
NumberSystem
System
PME295
R
B
3470 Y2, 300 VAC
M
F881
Series Metallized
Polypropylene
Film, Class
Metallized Polypropylene Film EMI Suppression Capacitors
PME295
Series
R
Rated Voltage (VAC)
B
Lead Spacing (mm)
R41 Series,
Class
Y2, 300 Lead
VAC,
110ºC
Series
Rated Voltage (VAC)
Spacing (mm)
Y1, Metallized Paper
R = 440
B = 15.0
Overview
(Automotive
Grade)
R = 440
B = 15.0
The F881 Series is constructed of metallized polypropylene film
Overview
New
KEMET
Part
System
NewR41
KEMET
PartNumber
Number
System
The
of metallized
polypropylene film
New
KEMET
Part
Number
encapsulated with self-extinguishingSystem
resin in a box of material
P ts
295
B
E
Benefi
3470
R30
Capacitance
M
Tolerance
Capacitance
Lead
R30and
Packaging
Code
Lead and
Digits 2 – 4 (3) indicate the first
M
= ±20%
See Ordering
Tolerance
Packaging
Code
Applications
Options Table
Digits 2 – 4 (3) indicate the first
M = ±20%
See Ordering
value.
three digits
of the capacitance
worldwide
use
as electromagnetic interferenceOptions
(EMI)Table
Digit For
1 indicates
the total
number
value.
of digits
in the capacitance
value.to earth" applications requiring Y2 safety
suppression
in
all
"line
Digit 1 indicates the total number
Applications
of digits
in thecation.
capacitance value.
classifi
For use in electromagnetic interference (EMI) suppression
filter in across-the-line applications requiring Y2 / X1 safety
471
M
440
A
Capacitance
Rated
Voltage
Lead
471
M
440
failureCode
would
not result in exposure to electric shock. Not Aforanduse
Capacitance
(pF)
Tolerance
(VAC)
Packaging
Code
Capacitance
Rated
Voltage
Lead and
in "series
Capacitance
Codewith
(pF)mains" type applications.
Capacitor
P
295
B
E
Series
Spacing (mm)
Size Code
• Approvals:
ENEC,
UL, cUL,Lead
CQC
Class
Capacitor
Automotive GradeSeries
devices are
available
(up to 22.5
Lead
Lead
Spacing (mm)
Sizemm
Code
• Rated
voltage:
VAC 50/60
P =Class
Paper
Y1, 300
Metallized
BHz
= 15.0
M
= ±20%
440
= 440
See Ordering
Tolerance
(VAC)
Packaging
Code
Spacing)
and meet
the demanding
Paper0.01 – 1.0 µF
Table
Options Table
• Capacitance
range:
P
=
Paper
Y1,
Metallized
B
=
15.0
See
Dimension
First
two
digits
indicate
the
M
=
±20%
440
=
440
See
Ordering
• Lead spacing: 22.5
Paper– 37.5 mm
Table
Options Table
zeros.
zeros.
Benefi
ts
F3064_PME295_Y1_440-480
4/16/2015
One world.• One
KEMET 1
Y2 Class
•© KEMET
Approvals:
ENEC,
UL, cUL,• P.O.
CQCBox 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
Electronics
Corporation
F3064_PME295_Y1_440-480 • 4/16/2015
1
• 100% screening factory test at 4,000 VDC and 2,500 VAC
• Class Y2 / X1 (IEC 60384-14)
F881 Series, Halogen Free,
Metallized Polypropylene, 300 VAC
Number
System – 1 µF −40°C to +110°C
1.0
μF
• Temperature
• Capacitance
range: 0.001Range:
• Lead spacing: 7.5 – 37.5 mm (7.5 mm in progress)
F
881 ±20%, ±10%B
C
103
M
300
C
• Capacitance
tolerance:
Capacitance
Capacitance
Lead
Spacing
• Capacitor
ClimaticClass
IEC 60068–1
Voltage (VAC) Lead and Packaging Code
Size Code
Series
Code (pF)
Tolerance
(mm)
F = Film
Metallized
K = 7.5
See Dimension
First two digits
K = ±10%
300
See Ordering
• RoHS
CompliantY2,and
Polypropylene
A = 10
Table
M = ±20%
Options Table
• Operating temperature range of -40˚C
to +110˚C
B = 15
D = VDC/2,500
22.5
specifies number of
VAC
F = 27.5
zeros.
R = 37.5
22.5 mm Lead Spacing
Options300
Table
R41 Series, Metallized Ordering
Polypropylene,
VAC (Automotive Grade)
1 μF
• Temperature
Part
Number
System
Lead Spacing
Nominal (mm)
R41
Type of Leads and Packaging
3
I
Series
Standard
Lead and Packaging
Options
Rated Voltage
Lead Spacing
(VAC)
(mm)
Bulk (Bag) – Short Leads
Y2, Metallized
Polypropylene
7.5
3 = Bulk
300 (Bag) – Long Leads
D = 7.5
F = 10.0
Tape & Reel (Standard
Reel)
I = 15.0
Other Lead and PackagingNOptions
= 22.5
R = 27.5
Bulk (Bag) – Max Length
Leads
W = 37.5
Ammo Pack
Lead Length
(mm)
2330
4 +2/-0
Digits 2 –174 +0/-1
indicate the
first H
three
digits
of the
=
18.5
+/-0.5
0
capacitance
value.
number 20
of zeros
+5/-0 to be
added.
H0= 18.5 +/-0.5
Lead and
Packaging
Code
00
M1
M
Lead and
Packaging
C Code
Internal Use
Capacitance
Tolerance
See Ordering
A
Options
L Table
00
M1
K = ±10%
M = ±20%
ALL0L
R
F3005_F881_Y2_300 • 4/16/2015
1
74
F3100_R41_Y2_300 • 4/16/2015
1
• Capacitance tolerance: ±20% for C > 0.1 µF, ±10% for C ≤ 0.1 µF
• Capacitance tolerance: ±20% for C > 0.1 µF, ±10% for C ≤ 0.1 µF
•AC100%
factory test
at 3,000
VDC
Linescreening
EMI Suppression
and
RC Networks
• 100%
screening
factory test
at 3,000
VDC
• The highest possible safety regarding active and passive flammability
• The
highest
safety regarding
active and passive flammability
AC
Line
EMI possible
Suppression
and RC Networks
Film Capacitors
Y2 Class (cont.)
PME271Y Series Metallized Impregnated Paper,
PME271Y
Series
Metallized
Impregnated Paper,
Class
250
VAC
0.15 μFY2,
• Temperature
Legacy
Part
Number
System
Class
Y2,
250
VAC
Legacy
LegacyPart
PartNumber
NumberSystem
System
PME271Y A–E Series Metallized Impregnated Paper, 300 VAC
PME271
Y
A
Overview
PME271
Y
A
Overview
Series
Rated Voltage (VAC)
Lead Spacing (mm)
The PME271Y Series is constructed of multilayer metallized
Series
Rated Voltage (VAC)
Lead Spacing (mm)
paper
encapsulated
impregnated
self-extinguishing
Y2,PME271Y
Metallized
Paper
Y = 300 ofinmultilayer
A = 10.2
The
Seriesand
is constructed
metallized
Y2, Metallized
Paper
Y = 300of UL 94 V–0. B
A == 15.2
10.2
material
meeting
the
requirements
paper encapsulated and impregnated in self-extinguishing
B == 15.2
C
20.3
20.3
material meeting the requirements of UL 94 V–0. DC == 22.5
D
22.5
E == 25.4
PME271Y Series
E = 25.4
Benefits
Benefi
ts ENEC,
New
KEMET
Part
Number
System
•New
Approvals:
UL,Number
CSA,
CQCSystem
KEMET
Part
New
KEMET
Part Number System
4100
M
R30
Applications
4100
M
R30
Capacitance
Lead
and
Applications
Capacitance
Code (pF)
Capacitance
Lead and
Typical applications include worldwide
use as electromagnetic
Tolerance
Packaging Code
Tolerance
Packaging Code
interference
suppressor
in
all
Y2
applications,
line-to-earth.
Digits
2
–
4(3)
indicates
the
fi
rst
M
=
±20%
See Ordering
Typical applications include worldwide use as electromagnetic
Digits
2
–
4(3)
indicates
the
fi
rst
M
=
±20%
See Ordering
(for C ≤ 0.1 µF)
Options
Table
interference
suppressor
in all(for
Y2
applications,
line-to-earth.
three
digits
of the
capacitance
0.1 µF)
Options Table
value.
First
digit
indicates
the total
KC=≤±10%
value.
First
digit
indicates
the
total
K
=
±10%
number of digits in the capacitance
(for C > 0.1 µF)
number of digits
in the capacitance
(for C > 0.1 µF)
value.
value.
• Approvals: ENEC, UL, CSA, CQC
•• Capacitance
0.001 – 0.1Hz
µFH
P voltage:range:
272VAC
E
102
M
300
A
Rated
250
P spacing: 10.2
272– 25.450/60
H
E
102
M
300
A
•• Lead
mm
Capacitor
Capacitance
Rated
Voltage
Lead
and
Capacitance
range:
– 0.1Spacing
µF (mm)
Series0.001 Lead
Size Code
Capacitor
Capacitance
Rated
Voltage
Lead
•• Capacitance
tolerance:
±20%
Class
Tolerance
(VAC)
Packagingand
Code
Series
Lead
Spacing
(mm)
Size
Code
Capacitance
Code
(pF)
Lead
Classspacing: 10.2 – 25.4 mm
Tolerance
(VAC)
Packaging Code
•• Climatic
40/100/56/B,
60068–1See Dimension First two digits indicate the
P = Paper category:
Y2,
Metallized
HIEC
= 10.2
M = ±20%
300 = 300
See Ordering
Capacitance
tolerance:
±20%
P = Paper
Y2,packaging
Metallized
H == 10.2
See Dimension
two digits
the (forMC=≤±20%
300 = 300
See Ordering
Paper
Q
15.2 with IEC
Table
two most
signifiindicate
cant digits
0.1 µF)
Options
Table
•• Tape
andcategory:
reel
in accordance
60286–2 First
Climatic
40/100/56/B,
60068–1 Table
Paper
Q
15.2
significantvalue
digitsin (forKC=≤±10%
0.1 µF)
Options Table
CIEC
== 20.3
oftwo
themost
capacitance
•• RoHS
Compliant
and
lead-free
terminations
C == 22.5
20.3 with IEC 60286–2 ofpicofarads.
the capacitance
value
Tape and reel packaging in accordance
D
The third
digitin (forKC=>±10%
0.1 µF)
•• Operating
temperature
range ofDEterminations
-40˚C
22.5 to +100˚C
picofarads.
The
digit
(for C > 0.1 µF)
== 25.4
is
the number
of third
following
RoHS Compliant
and lead-free
= 25.4
is the number
of following
zeros.
•• 100%
screening
factoryrange
test atofE3,000
Operating
temperature
-40˚CVDC
to +100˚C
zeros.
•• Highest
possible
safety
regarding
active
and
passive
flHighest
ammability
Electronics
• P.O. Boxactive
5928 •and
Greenville,
SC 29606 (864) 963-6300 • www.kemet.com
F3017_PME271YA_Y2_300 • 4/16/2015
1
•© KEMET
possibleCorporation
safety regarding
passive
© KEMETImpregnated
• P.O. Box 250
5928 • VAC
Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3017_PME271YA_Y2_300 • 4/16/2015
1
Metallized
Paper,
flammability
0.1 μF Part
• Temperature
Legacy
Number Range:
Legacy Part
Legacy
PartNumber
NumberSystem
System
PME271
Y
410
M
R30
PME271
Series
Y (VAC)
Rated Voltage
410Code (pF)
Capacitance
Series Paper
Y2, Metallized
Rated Y
Voltage
= 250 (VAC)
Y = 250
Code
Digits 2Capacitance
– 4(3) indicates
the(pF)
first three
digits of the capacitance value. First digit
Digits 2 the
– 4(3)
indicates
first three
indicates
total
numberthe
of digits
in the
digits of thecapacitance
capacitancevalue.
value. First digit
indicates the total number of digits in the
capacitance value.
Capacitance
M
Tolerance
Capacitance
M
= ±20%
Tolerance
Lead
R30and
Packaging Code
Lead and
See Ordering
Packaging
Code
Options Table
See Ordering
Options Table
New KEMET
New
KEMETPart
PartNumber
NumberSystem
System
P
Capacitor
P
Class
Capacitor
P =Class
Paper
P = Paper
M = ±20%
271
H
E
102
M
250
A
Capacitance
M
Tolerance
Capacitance
M
= ±20%
Tolerance
Rated250
Voltage
(VAC)
Rated Voltage
250
= 250
(VAC)
M = ±20%
250 = 250
LeadAand
Packaging Code
Lead and
See Ordering
Packaging
Code
Options Table
See Ordering
Options Table
271
Series
H (mm)
Lead Spacing
SizeECode
102Code (pF)
Capacitance
Y2, Series
Metallized
Paper
Y2, Metallized
Paper
Lead H
Spacing
= 10.2 (mm)
Q = 15.2
H == 20.3
10.2
C
Q
15.2
E == 25.4
C = 20.3
E = 25.4
Size
Code
See
Dimension
Table
See Dimension
Table
Capacitance
(pF)
First
two digits Code
indicate
the
First
digits indicate
of
thetwo
capacitance
valuethe
in
two
most signifi
picofarads.
Thecant
thirddigits
digit
ofis the
value in
the capacitance
number of following
picofarads.
The third digit
zeros.
zeros.
F3016_PME271Y_Y2_250 • 4/16/2015
1
F3016_PME271Y_Y2_250 • 4/16/2015
1
75
Multiple X & Y
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Capacitance range: 3 x 1.0 µF
Rated voltage: 300 VAC 50/60 Hz
Lead spacing: 27.5 mm
Capacitance range: 3 x 1.0 µF
Capacitance tolerance: ±20%, other tolerances on request
Lead spacing: 27.5 mm
Climatic category: 55/105/56, IEC 60068–1
Capacitance tolerance: ±20%, other tolerances on request
Climatic category: 55/105/56, IEC 60068–1
Film Capacitors
AC
AC Line
Line EMI
EMI Suppression
Suppression and
and RC
RC Networks
Networks
PHZ9004 Series Metallized
Polypropylene
Film, 300 VACImpregnated
3x X2 with Separate
PMZ2074
Series Metallized
Paper,Terminals for Three-Phase Filtering
Metallized
Impregnated
Legacy
Part Series
Number
System
Capacitance Range: 3 x 1.0PMZ2074
μF • Temperature
Range:
−55°C to +105°C
Paper,
275
VAC
2x
X2
with
One
Common
Terminal
275
VAC
X2 with
One Common Terminal
Legacy
Part
Number
System
Legacy
Part2x
Number
System
PHZ9004
E
F
7100
M
R06L2
Lead and
R06L2
Packaging Code
Lead and
Rated EVoltage
Lead Spacing
= 300 (VAC)
F = 27.5 (mm)
See Ordering
Packaging Code
X2,
MetallizedSeries is constructed of multilayer metallized three digitsTypical
of the capacitance
Options
Table
The
PMZ2074
applications
include
worldwide
use
as
an
electromagnetic
The
PMZ2074
of multilayer
metallized Digits 2 – 4(3)
Typical
applications
use as an
Triple
CapacitorSeries is constructed
E = 300
F = 27.5
indicates
the first include
M =worldwide
±20%
Seeelectromagnetic
Ordering
Polypropylene
value.
paper
and
interference
in
applications
or
X2, encapsulated
Metallized
of thethe
capacitance
Options
Table
digitdigits
indicates
total suppressor
number
paper
encapsulated
and impregnated
impregnated in
self-extinguishing Firstthree
interference
suppressor
in all
all X2,
X2, across-the-line
across-the-line
applications
or
Polypropylene
value.
material
meeting
the
requirements
of
UL
94
V–0.
other
demanding
of digits in the
capacitance
value.applications where two capacitors are utilized
material meeting the requirements of UL 94 V–0.
other
demanding
applications
where
two
capacitors
are
utilized
the total number
in
in series.
series.
of digits in the
capacitance value.
PHZ9004
Series
Overview
Overview
TripleSeries
Capacitor
PMZ2074 Series
E (VAC)
Rated Voltage
F (mm)
Lead Spacing
Capacitance
M
Tolerance
Capacitance
M = ±20%
Tolerance
7100Code (pF)
Capacitance
Applications
Applications
Capacitance
Code (pF)
Digits
2 – 4(3) indicates
the first
New
New KEMET
KEMETPart
PartNumber
NumberSystem
System
Benefi
ts
Benefi
ts
9004
AA
105
M
300
C
DECT
V680
•• Approvals:
ENEC
Capacitance
Rated Voltage
Lead and
Approvals:
ENEC
9004Class Size
AA
105Code (pF)
M
300
C
DECT
V680
C-Spec
V-Spec
Code 50/60
Capacitance
••Capacitor
Rated
Tolerance
(VAC)
Packaging Code
Rated voltage:
voltage: 275
275 VAC
VAC 50/60 Hz
Hz
Capacitance
Rated
Voltage
Lead
and
••Capacitor
Capacitance:
µF
µF,
++ 0.047
++
SizeSee
Code
Capacitance
Code
(pF)
C-Spec
V-Spec
TripleClass 0.15
First
two0.15
digitsµF
indicate
the µF,
M = µF
±20%
300 = 300
See Ordering
Optional
Part
Number
Capacitance:
0.15
µF ++ 0.033
0.033
µF,
0.15
µF
0.047
µF, 0.15
0.15
µF
Tolerance
(VAC)
Packaging Code
0.068
µF,
0.22
µF
+
0.082
µF,
0.22
µF
+
0.1
µF
Capacitor
X2,
Dimension
two
most
signifi
cant
digits
Options Table
additional
specific version
0.068 µF, 0.22 µF + 0.082 µF, 0.22 µF + 0.1 µF
Triple
See
First
digits indicate
M = ±20%
300 = 300
See Ordering
Optional at
Partcode
Number
Metallized
Table
of
thetwo
capacitance
valuethe
in
characters
•• Lead
20.3
Lead spacing:
spacing:
20.3 mm
mm picofarads.
Capacitor
X2, Dimension
two most signifi
cant digit
digitsis
Options Table
additional
Polypropylene
The third
KEMET’s
option specific version
•• Capacitance
tolerance:
±20%,
±10%
Metallized
Table ±20%,
of number
the±10%
capacitance
value
in
characters at
code
Capacitance
tolerance:
the
of following
zeros.
•• Polypropylene
Climatic
IEC
picofarads.
The third digit is
KEMET’s option
Climatic category:
category: 40/110/56/B,
40/110/56/B,
IEC 60068–1
60068–1
•• RoHS
RoHS Compliant
Compliant and
and lead-free
terminations
•• KEMET
Operating
temperature
range
of
-40˚C
to
+110˚C
©
Electronics
Corporation
•
P.O.
Box
5928
•
Greenville,
SC
29606
(864)
963-6300
•
www.kemet.com
F3021_PHZ9004_3xX2_300
• 4/16/2015
1
Operating
temperature range
of -40˚C
to VAC
+110˚C2x X2 with One Common Terminal
Metallized
Impregnated
Paper,
275
•• 100%
screening
factory
test
at
2,150
VDC
Electronics
Corporation
• P.O. Box
SC 29606
(864) 963-6300
• www.kemet.com
F3021_PHZ9004_3xX2_300
• 4/16/2015
Capacitance Range: 0.15 μF© KEMET
+ 0.033
μF, 0.15
μF + 0.047
μF,5928
0.15• Greenville,
μF + 0.068
μF, 0.22
μF + 0.082
μF, 0.22 μF + 0.1
μF
Legacy
Part Number
System
Legacy
LegacyPart
PartNumber
NumberSystem
System
PMZ2074
PMZ2074
Series
Series
Double
Double
Capacitor X2,
Capacitor X2,
Metallized
Metallized
Paper
Paper
M
M
Rated Voltage
Rated Voltage
(VAC)
(VAC)
M = 275
M = 275
C
C
Lead Spacing
Lead Spacing
(mm)
(mm)
C = 20.3
C = 20.3
615
615
M
M
first three digits of the C1
first three digits of the C1
capacitance value.
capacitance value.
capacitance value.
capacitance value.
Capacitance
Capacitance
Tolerance
Tolerance
K = ±10%
K = ±10%
M = ±20%
M = ±20%
533
533
M
M
P
P
Internal Use
Internal Use
C2 capacitance value.
C2 capacitance value.
total number of digits in
total number of digits in
the capacitance value.
M (Standard)
M (Standard)
374
374
Series
Series
Double
Double
Capacitor
Capacitor
X2,
X2,
Metallized
Metallized
Paper
Paper
C
C
Lead Spacing
Lead Spacing
(mm)
(mm)
C = 20.3
C = 20.3
L
L
154
154
M
M
Capacitance
Size Code
X Capacitance Code (pF) Capacitance
Size Code
X Capacitance Code (pF) Tolerance
Tolerance
See Dimension First two digits indicate
M = ±20%
See Dimension First two digits indicate
M = ±20%
Table
Table
of following zeros.
of following zeros.
76
R30
R30
Lead and
Lead and
Packaging Code
Packaging Code
See Ordering
See Ordering
Options Table
Options Table
New
New
KEMETPart
PartNumber
NumberSystem
System
New KEMET
KEMET
Part
Number
System
Capacitor
Capacitor
Class
Class
P = Paper
P = Paper
1
275
275
A
A
C333
C333
Rated Voltage
Lead and
Y Capacitance
Rated Voltage
Lead and
Y Capacitance
(VAC)
Packaging Code
Code
(VAC)
Packaging Code
Code
275 = 275
See Ordering
C + first two
275 = 275
See Ordering
C + first two
Options Table digits represent
Options Table digits represent
significant
significant
specifies number
specifies number
of zeros.
of zeros.
F3020_PMZ2074_2xX2_275 • 4/16/2015
F3020_PMZ2074_2xX2_275 • 4/16/2015
1
1
Benefits
•• Approvals:
Approvals: ENEC,
ENEC, UL,
UL, CSA
CSA
•• Rated
voltage:
275
VAC 50/60
50/60 Hz
Hz
•• Capacitance
X
Value:
0.1
Capacitance X Value: 0.1 µF
µF and
and 0.15
0.15 µF
µF
•• Capacitance
Capacitance Y
Y Value:
Value: 0.0022
0.0022 µF,
µF, 0.0033
0.0033 µF
µF and
and 0.0047
0.0047 µF
µF
•• Lead
Lead spacing:
spacing: 20
20 mm
mm
•• Capacitance
Capacitance tolerance:
tolerance: ±20%
±20%
•• Climatic
category:
Climatic category: 40/100/56/B,
40/100/56/B, IEC
IEC 60068–1
60068–1
Multiple X & Y (cont.)
•• Tape
and
reel
packaging
in
accordance
Tape and reel packaging in accordance with
with IEC
IEC 60286–2
60286–2
•• RoHS
Compliant
and
lead-free
terminations
RoHS
PZB300 Series Metallized
Impregnated
Paper,terminations
275 VAC Delta Configuration
•• Operating
temperature range
range of
of -40˚C
-40˚C to
to +100˚C
+100˚C
Film Capacitors
X2 + 2x Y2
Capacitance Range: X Value 0.1 μF and 0.15 μF, Y Value 0.0022 μF, 0.0033 μF and 0.0047 μF • Temperature Range: −40°C to +100°C
Legacy
Legacy
PartNumber
NumberSystem
System
Legacy Part
Part
Number
System
PZB300
PZB300
M
M
C
C
11
11
Series
Series
Rated
Rated Voltage
Voltage (VAC)
(VAC)
Lead
Lead Spacing
Spacing (mm)
(mm)
Capacitance
Capacitance Code
Code (pF)
(pF)
Delta
Delta EMI,
EMI,
X2
X2 ++ 2x
2x Y2,
Y2,
Metallized
Metallized Paper
Paper
M
M == 275
275
C == 20.0
20.0
C
The fifirst
rst digit
digit indicates
indicates the
the value
value of
of the
the
The
X capacitor:
capacitor:
X
0.10 µF
µF
11 == 0.10
0.15 µF
µF
22 == 0.15
The second
second digit
digit indicates
indicates the
the value
value of
of
The
the Y
Y capacitor:
capacitor:
the
0.0022 µF
µF
11 == 0.0022
0.0033 µF
µF
22 == 0.0033
0.0047 µF
µF
33 == 0.0047
See Ordering
Ordering
See
Options Table
Table
Options
New
New
KEMETPart
PartNumber
NumberSystem
System
New KEMET
KEMET
Part
Number
System
P
P
Capacitor
Capacitor
Class
Class
P
=
P = Paper
Paper
R30
R30
Lead
Lead and
and
Packaging
Packaging Code
Code
300
300
Series
Series
Delta
Delta EMI,
EMI,
X2
X2 ++ 2x
2x Y2,
Y2,
Metallized
Metallized
Paper
Paper
P
P
Lead Spacing
Spacing
Lead
(mm)
(mm)
P
P == 20
20
L
L
104
104
Size Code
Code
Size
X Capacitance
Capacitance Code
Code (pF)
(pF)
X
See
See
Dimension
Dimension
Table
Table
First
First two
two digits
digits indicate
indicate
the two
two most
most signifi
significant
cant
the
digits
of
the
capacitance
value in
in picofarads.
picofarads. The
The
value
third digit
digit is
is the
the number
number
third
of following
following zeros.
zeros.
of
M
M
Capacitance
Capacitance
Tolerance
Tolerance
M
M == ±20%
±20%
©
© KEMET
KEMET Electronics
P.O. Box
Box 5928
Greenville, SC
SC 29606
29606 (864)
(864) 963-6300
www.kemet.com
275
275
A
A
C222
C222
Rated Voltage
Voltage
Lead and
and
Y
Capacitance
Rated
Lead
Y Capacitance
(VAC)
Packaging Code
Code
Code
(VAC)
Packaging
Code
275
=
275
See
Ordering
C
+
275 = 275
See Ordering
C + fifirst
rst two
two
Options Table
Table digits
Options
digits represent
represent
signifi
cant
significant
fifigures.
gures. Third
Third
digit
digit specifi
specifies
es
number
number of
of
zeros.
zeros.
One
One world.
world. One
One KEMET
KEMET
F3019_PZB300_X2_2xY2_275
F3019_PZB300_X2_2xY2_275 •• 4/16/2015
4/16/2015
11
77
•Overview
•Overview
Dual in-line (DIL) metallized polyester (PET) film capacitor for
Dual in-line
(DIL) metallized
polyester
(PET) film capacitor
for
surface
mounting.
Encapsulation
material
surface mounting.
Encapsulation
self-extinguishing material
meeting
the requirements
of UL 94in V–0.
Applications
Applications
Film Capacitors
Typical applications include high frequency switched-mode power
include high
power
supplies,
DC/DC converters
and frequency
input/outputswitched-mode
filtering.
supplies, DC/DC converters and input/output filtering.
Surface Mount
Polyester (PET)
F161 Series Encapsulated Stacked, Size 2220 – 6560, 50 – 400 VDC
Part
Number
System
Capacitance Range: 0.01 toBenefi
12 μF
•tsTemperature
Benefits
•
•
•
•
•
•
•
•
Rated
F voltage: 50
161– 630 VDC P
L
102
50 – 630
VDC
Rated
voltage: 30
220 VAC
Capacitor
Series
Size
Size Code
Rated
30 – 220
Capacitance
range:
0.033VAC
– Chip
15 µF
Classvoltage:
range:
0.033
–
15
µF
Capacitance
tolerance:
±5%,
±10%,
other
tolerances
on
request
F = Film
Metallized
P = 2220
See Dimension
Capacitance
tolerance:
±5%, S±10%,
Climatic
category:
55/125/56
Polyester
= 2824 other tolerances
Table on request
Stacked
W =terminations
4036
ClimaticCompliant
category:
55/125/56
RoHS
and
lead-free
Technology
Y = 5045
RoHS Compliant
and lead-free
Operating
temperature
range Zof=terminations
-55˚C
to +125˚C
6560
K
050
V
Capacitance
Tolerance
Rated Voltage
(VDC)
Packaging Code
J = ±5
K = ±10%
Other tolerances
on request
050 = 50
063 = 63
100 = 100
250 = 250
400 = 400
See Ordering
Options Table
MDC Series Dual In-Line, High Current, 50 – 630 VDC
Capacitance Range: 0.033 Legacy
to 15 μF •Part
Temperature
NumberRange:
Legacy
LegacyPart
PartNumber
NumberSystem
System
MDC
MDC
10
333
K
50
A52
Lead 10
Spacing
Capacitance
Rated50
Voltage
333
K
A52
Series
Size Code
Tolerance
(VDC)
Lead(mm)
Spacing
Capacitance
Voltage
• P.O. Box 5928 • Greenville, SC 29606
(864) 963-6300Rated
• www.kemet.com
Series
Size Code
Dual In-Line,
10
J = ±5
50
See Dimension
(mm)
Tolerance
(VDC)
Metallized
15
the
two
most
signifi
cant
K
=
±10%
100
Table
Dual In-Line,
10
J = ±5
50
See Dimension
Polyester
digits
of most
the capacitance
250
Metallized
15
the two
significant Other
K =tolerances
±10%
100
Table
value of
in the
picofarads.
The Other
on request
400
Polyester
digits
capacitance
tolerances
250
third
digit
is
the
number
of
630
on request
400
following
third digit
is thezeros.
number of
630
following zeros.
New
New KEMET
KEMETPart
PartNumber
NumberSystem
System
F
Capacitor
F
Class
Capacitor
FClass
= Film
F = Film
15
15
3
A
Number
3 of Lead Spacing
A
Series
Leads
per Side
Number
of
Lead(mm)
Spacing
Series
Dual In-Line, Leads
3 = per
3 leads
A = 10
Side
(mm)
Metallized
43 == 43 leads
B == 10
15
Dual In-Line,
leads
A
Polyester
54 == 54 leads
Metallized
leads
B = 15
75 == 75 leads
Polyester
leads
87 == 87 leads
leads
8 = 8 leads
A
A
Size Code
333
333
Size Code
A = Standard First two digits indicate the
box
size
two
signifiindicate
cant digits
A = Standard First most
two digits
the
oftwo
themost
capacitance
box size
significantvalue
digitsin
picofarads.
The
third
digit
is
the number
of third
following
picofarads.
The
digit
zeros.
is the number
of following
zeros.
K
Capacitance
K
Tolerance
Capacitance
J = ±5
Tolerance
K J==±10%
±5
K Other
= ±10%
tolerances
Other on
request on
tolerances
request
P3
TUBE
NumberP3
of Leads
TUBE
One
world.
One
KEMET
Packaging Code
perF3086_F161
Side
Number
of Leads • 4/16/2015
1
Packaging Code
P3
3 leads
See Ordering
per= Side
P4 == 43 leads
Options
Table
P3
leads
See Ordering
P5
leads
P4 == 45 leads
Options Table
P7
leads
P5 == 57 leads
P8
P7 == 87 leads
leads
P8 = 8 leads
050
T
Rated050
Voltage
T
Packaging Code
(VDC)
Rated
Voltage
Packaging Code
050
= 50
See Ordering
(VDC)
100
=
100
Options
Table
050 = 50
See Ordering
250
100 == 250
100
Options Table
400
250 == 400
250
630 == 630
400
400
630 = 630
78
F3074_MDC
4/16/2015
One world.• One
KEMET 1
F3074_MDC • 4/16/2015
1
• Rated voltage: 50 – 630 VDC
• Rated voltage: 30 – 220 VAC
• Capacitance tolerance: ±5%, ±10%, other tolerances on request
• Capacitance
range:
0.033 – 6.8 µF
Surface
Polyethylene
• ClimaticMount
category:
55/125/56 Naphthalate (PEN) Film Capacitor
• Capacitance tolerance: ±5%, ±10%, other tolerances on request
Film Capacitors
Surface Mount
LDE Series Unencapsulated Stacked Chip,
Size 1206 – 6054, 50 – 1,000 VDC (Automotive Grade)
Polyester (PET) (cont.)
MDS Series Dual In-Line
Low Profile, High Current, 50 – 630 VDC
Overview
Number Range:
to 6.8 μF Part
• Temperature
Polyethylene naphthalate (PEN) film capacitor for surface
Typical applications include bypassing and signal coupling. LDE
Legacy
Part
Number
System
Legacy
Partmeets
Number
System
mounting
the
Automotive
is a general50
purpose seriesA52
designed forP3
the highest reliability
MDSwhich
10 demanding
333 Electronics K
TUBE
Capacitance and high temperature service. Not Number
Leads
suitableoffor
across-the-line
Series
Lead Spacing
Rated Voltage
Code
Packaging
MDS
10 (mm) Capacitance
333Code (pF)
K
50 (VDC) SizeA52
P3
TUBECode
Tolerance application (see suppressor capacitors).
per Side
Dual
In-Line,
Series
Metallized
Dual
In-Line,
Polyester
Metallized
Polyester
Applications
10 (mm) Capacitance
First two digits
indicate
Lead Spacing
Code
(pF)
15
10
First two
digits
indicate
digits
of the
capacitance
15
the two
significant
value
in most
picofarads.
The
digitsdigit
of the
capacitance
third
is the
number of
valuefollowing
in picofarads.
zeros. The
third digit is the number of
following zeros.
Capacitance
J = ±5
050 = 50(VDC)
Rated Voltage
Tolerance
K = ±10%
100 = 100
= ±5
050==250
50
OtherJtolerances
250
K =request
±10%
100 = 100
on
400
400
Other tolerances
250 = 630
250
630
on request
400 = 400
630 = 630
Benefits
New
New KEMET
KEMETPart
PartNumber
NumberSystem
System
• Rated voltage: 50 – 1,000 VDC
New
KEMET Part Number System
•
•
•
•
•
•
•
F
17
3
A
A
SizeSee
Code
Dimension
See
Table
Dimension
Table
333
Capacitance range: 0.001Number
– 4.7 of
µF Lead Spacing
Capacitor
Series
SizeACode
Capacitance
F
17
3
A
333Code (pF)
Class
(mm)
EIA
size: 1206 – 6054 Leads per Side
Capacitor
Number of
Lead Spacing
F
=
Film
Dual
In-Line,
3
=
3
leads
A
=
10
A
=
Standard
First
two
digits
indicate
the
Series
Capacitance Code
(pF)
Capacitance
tolerance:
±10%,
±20%,
±5%(mm)
on request Size Code
Class
Side
Metallized Leads
4 = per
4 leads
B = 15
box size
Climatic
55/125/56
F = Film category:
Dual
In-Line,
A = 10
A = Standard of
First
digits indicate
Polyester
53 = 53 leads
thetwo
capacitance
valuethe
in
RoHS Compliant
and lead-free
terminations
Metallized
4 = 4 leads
B = 15
box size
two
most signifi
picofarads.
Thecant
thirddigits
digit
Polyester
5 = 5 of
leads
ofis the
value in
the capacitance
number of following
range
-55˚C to +125˚C
picofarads.
The third digit
zeros.
Automotive (AEC–Q200) grades available
zeros.
Number of Leads
P3 = 3 leads Packaging
See Ordering
Code
per= Side
P4
4 leads
Options Table
P3
See Ordering
P5 = 53 leads
P4 = 4 leads
Options Table
P5 = 5 leads
K
050
T
Capacitance
Rated Voltage Packaging
K
050
T
Tolerance
(VDC)
Code
Capacitance
Rated Voltage Packaging
J = ±5
050 = 50 See Ordering
Tolerance
(VDC)
CodeTable
K = ±10%
100
= 100 Options
= ±5
050==250
50 See Ordering
250
OtherJtolerances
K =request
±10%
100 = 100
on
400
400 Options Table
Other tolerances
250 = 630
250
630
on request
400 = 400
630 = 630
Polyethylene Naphthalate (PEN)
F3075_MDS • 4/16/2015
1
F3075_MDS • 4/16/2015
1
LDE Series Unencapsulated Stacked Chip, Size 1206 – 6054, 50 – 1,000 VDC (Automotive Grade)
Capacitance Range: 0.001 Part
to 4.7Number
μF • Temperature
LDE
Series
Metallized
PEN
C
C
Rated Voltage
Size Code
(VDC)
C = 50
See
D = 63
Dimension
E = 100
Table
I = 250
M = 400
P = 630
Q = 1000
2560
capacitance value.
added.
M
Capacitance
Tolerance
K = ±10%
M = ±20%
J = ±5% on
request
A
5
N
00
Dielectric
Version
Packaging Code
Internal Use
See Ordering
Options Table
00 (Standard)
A = PEN
5 = Standard
0 = Miniature
F3078_LDE • 4/16/2015
1
79
••
••
••
••
••
••
••
•
Rated
300 VDC
VAC
Rated voltage:
voltage: 30
50 –– 630
Capacitance
range:
0.001
– 5.6 µF
Rated voltage: 30 – 300 VAC
EIA
size:
2220
–
6560
Capacitance range: 0.001 – 5.6 µF
Capacitance
EIA size: 2220tolerance:
– 6560 ±5%, ±10%, other tolerances on request
Climatic
category:
55/125/56
Capacitance
tolerance:
±5%, ±10%, other tolerances on request
RoHS
ClimaticCompliant
category:and
55/125/56
Operating
temperature
-55˚C to +125˚C
RoHS Compliant
and lead-free
Film Capacitors
Surface Mount
Polyethylene Naphthalate (PEN) (cont.)
Surface Mount Polyethylene Naphthalate (PEN) Film Capacitor
Surface
Mount Polyethylene
Naphthalate
GMC Series Encapsulated
Stacked,
Size 2220
– 6560,(PEN)
50 – Film
630Capacitor
VDC
Encapsulated
Double
Capacitance Range: 0.001 GPC
to 5.6 μFSeries
• Temperature
Range:
+125°C
Legacy
Part
Number
System−55°C to
GPC
Series
Encapsulated
Double
Legacy
Part
System
Size
2824
––Number
6560,
63 – 1,000 VDC
Legacy
PartNumber
System
Size
2824
6560,
VDC
GMC
5.7 63 – 1,000 102
GMC
Series
5.7 (mm)
Chip Length
SeriesPEN
Overview
Metallized
Overview
Metallized,
Metallized,
K
102Code (pF)
Capacitance
Chip Length
Capacitance
(pF)
5.7 (mm)
First
two digits Code
indicate
the
7.3
Metallized PEN
5.7
10.2
of thesided
capacitance
value in
Film capacitor for surface mounting.
Double
metallized
7.3
two most
signifi
cant digits
Film capacitor for surface mounting.
Double
sided
metallized
12.7
picofarads.
The
third digit is
polyethylene naphthalate (PEN)
Clear
PEN
as
10.2 as electrode.
of the capacitance
value
in
16.5 as electrode.
the number
of following
zeros.
polyethylene naphthalate (PEN)
Clear
as
12.7
ThePEN
third digit
is
dielectric. Rugged box encapsulation
inpicofarads.
self-extinguishing
dielectric. Rugged box encapsulation
intheself-extinguishing
16.5
GPC Series
50
J31
suppressor capacitors).
New
New KEMET
KEMETPart
PartNumber
NumberSystem
System
BenefiF ts
115
P
Benefits
L
102
F
115
P
L
102Code (pF)
Capacitor Class
Series
Chip Size
Size Code
Capacitance
• Rated voltage: 63 – 1,000 VDC
• Capacitor
Rated
voltage:
63
–
1,000
VDC
Class Metallized
Size
Size
Code
Capacitance
(pF)
F = Film
P = 2220
See
Dimension
First
two digits Code
indicate
the
• Rated
voltage:
40 Series
– 350PEN
VAC Chip
• Rated voltage: 40 – 350 VAC S = 2824
Table
• Capacitance
range:
0.00047
–
1.0
µF
F = Film
Metallized PEN
P = 2220
See Dimension
= 4036
• Capacitance range: 0.00047 – 1.0W
S µF
= 2824
Table
• EIA size: 2824 – 6560
Y = 5045
• EIA size: 2824 – 6560
W = 4036
Z = 6560
• Capacitance tolerance: ±10%, ±20%,
other tolerances on request
Y = 5045
• Capacitance tolerance: ±10%, ±20%,
Z = 6560
• Operating
temperature
range of Size
-55˚C to
+125˚C
Encapsulated
Double
Metallized,
2824
– 6560, 63 – 1,000 VDC
K
Series
Series
Double Metallized
DoublePEN
Metallized
PEN
Chip Length (mm)
Chip Length (mm)
7.3
7.3
10.2
10.2
12.7
12.7
16.5
16.5
First
two digits
the
two most
signifiindicate
cant digits
significantvalue
digitsin
oftwo
themost
capacitance
of the capacitance
picofarads.
The thirdvalue
digitinis
picofarads.
third digit
is
the
number ofThe
following
zeros.
K
K
Capacitance
Capacitance
Tolerance
Tolerance
K = ±10%
K == ±10%
M
±20%
M =tolerances
±20%
Other
Other
tolerances
on request
on request
63
63
Rated Voltage
Rated
Voltage
(VDC)
(VDC)
63
63
100
100
160
160
250
250
400
400
630
630
1,000
1,000
F
F
117
117
Series
Series
Double
Double
Metallized PEN
Metallized PEN
S
S
Chip Size
Chip Size
S = 2824
S == 2824
W
4036
W
4036
Y == 5045
Y
5045
Z == 6560
Z = 6560
G
G
Size Code
Size Code
See Dimension
See Dimension
Table
Table
471
471
Size Code
Size Code
See Dimension
See Dimension
Table
Table
First
two digits
the
two most
signifiindicate
cant digits
significantvalue
digitsin
oftwo
themost
capacitance
of the capacitance
picofarads.
The thirdvalue
digitinis
picofarads.
third digit
is
the
number ofThe
following
zeros.
K
K
063
063
Capacitance
Rated Voltage
Capacitance
Rated
Voltage
Tolerance
(VDC)
Tolerance
(VDC)
K = ±10%
063 = 63
K == ±10%
063==100
63
M
±20%
100
M
=
±20%
100
100
Other tolerances
160 == 160
Other
tolerances
160 == 250
160
on request
250
on request
250 == 400
250
400
400
400
630 == 630
630==1,000
630
1K0
1K0 = 1,000
80
K31
K31
1
TR12
TR12
Packaging Code
Packaging Code
See Ordering
See Ordering
Options
Table
Options Table
New
New KEMET
KEMETPart
PartNumber
NumberSystem
System
New
KEMET
Part
Number
System
Capacitor
Capacitor
Class
Class
F = Film
F = Film
F3079_GMC • 4/16/2015
Legacy
LegacyPart
PartNumber
NumberSystem
System
471
471
Packaging
Code
See Ordering
Options Table
See Ordering
Options Table
F3079_GMC
4/16/2015
One world.• One
KEMET 1
©
KEMET Electronics
Corporation System
Legacy
Part Number
7.3
7.3
V
V Code
Packaging
GPC
GPC
050
Capacitance
Rated050
Voltage
K
Tolerance
(VDC)
Capacitance
Rated Voltage
J = ±5%
050
= 50
Tolerance
(VDC)
K = ±10%
063 = 63
J = ±5%
050 = 50
Other tolerances
100 = 100
K = ±10%
063 = 63
250 = 250
on request
Other tolerances
100 = 100
400 = 400
on request
250 = 250
630 = 630
400 = 400
630 = 630
TR12
Capacitance
Rated50
Voltage
K
J31
TR12Code
Size
Code
Packaging
Tolerance
(VDC)
Capacitance
Rated Voltage
Size
Code
Packaging
Code
Applications
J = ±5%
50
See
Dimension
See Ordering
Tolerance
(VDC)
Applications
K = ±10%
63
Table
Options Table
J = ±5%
50
See Dimension
See Ordering
Other
tolerances
GPC Series is 100
designed
for highTable
frequency coupling
KThe
= ±10%
63
Optionsand
Table
The
GPC Series is 250
designed
for high frequency coupling
and
on
request
decoupling
as general high speed applications requiring
Other
tolerances as well 100
400
decoupling
as well 250
as general high speed applications requiring
on
request
high
dV/dt such as 630
pulse operation in switched-mode power
high dV/dt such as 400
pulse operation in switched-mode power
supply (SMPS). Not630
suitable for across-the-line application (see
supply (SMPS). Not suitable for across-the-line application (see
V
V
Packaging Code
Packaging Code
See Ordering
See Ordering
Options
Table
Options Table
F3080_GPC • 4/16/2015
F3080_GPC • 4/16/2015
1
1
Overview
• RoHS Complaint and lead-free terminations
Overview
Polyphenylene sulphide (PPS) film capacitor for surface
mounting. Encapsulation in self-extinguishing material meeting
Polyphenylene sulphide (PPS) film capacitor for surface
mounting. Encapsulation in self-extinguishing material meeting
Applications
Applications
Typical applications include timing, filtering and use as a memory
Film Capacitors
Surface Mount
capacitor. The SMC Series is designed for high stability, accuracy
Typical applications include timing, filtering and use as a memory
and temperature. Not suitable for across-the-line application (see
capacitor. The SMC Series is designed for high stability, accuracy
and temperature. Not suitable for across-the-line application (see
Metallized Polyphenylene Sulfide (PPS)
BenefitsStacked Chip, Size 1206 – 1812, 16 & 50 VDC
LDB Series Unencapsulated
Part
Capacitance Range: 0.0033Benefi
to 0.1Number
μF
ts • Temperature
• Rated
LDBvoltage: 50 A– 400 VDC A
2120
• Rated voltage:
30 Voltage
– 200 VAC
Rated
• EIA
size: 2220 – 6560
Size Code
Series
(VDC)0.001 – 3.3 µF
• Capacitance range:
• Capacitance tolerance: ±2%, ±2.5%, ±5%
•Metallized
EIA size:
2220 – A6560
PPS
= 16
See Dimension Digits 2 – 4 indicate the
C =55/125/56
50 ±2%, ±2.5%,
Table ±5%
• RoHS Compliant and lead-free terminationscapacitance value.
digit indicates the
• Operating temperature range of -55˚C to First
+125˚C
• Operating temperature range of -55˚C to +125˚Cadded.
G
C
5
N
0
Capacitance
Tolerance
Dielectric
Version
Packaging Code
Internal Use
C = PPS
5 = Standard
See Ordering
Options Table
0 (Standard)
G = ±2%
J = ±5%
SMC Series Encapsulated Stacked, Size 2220 – 6560, 50 – 400 VDC
to 3.3 μF Part
• Temperature
Number Range:
LegacyPart
PartNumber
NumberSystem
System
Legacy
SMC
5.7
102
J
50
J31
© KEMET Electronics Corporation • P.O. Box 5928
• Greenville,Code
SC 29606 (864)
Capacitance
Capacitance
Rated50
Voltage
SMC
5.7 (mm)
102
J
Series
Chip Length
(pF)
Tolerance
(VDC)
Capacitance Code
Capacitance
Rated Voltage
SeriesPPS
Chip Length
Metallized
5.7 (mm)
First two digits
G = ±2%
50
(pF)
Tolerance
(VDC)
7.3
represent significant H = ±2.5%
100
Metallized PPS
5.7
FirstThe
two third
digitsdigit JG==±5%
±2%
50
10.2
figures.
250
7.3
represent
significant
100
12.7
specifies number
of H = ±2.5%
400
figures. zeros.
The third digit J = ±5%
10.2
250
16.5
12.7
specifies number of
400
16.5
zeros.
New
New KEMET
KEMETPart
PartNumber
NumberSystem
System
F
F Class
Capacitor
125
Series
Capacitor
Class
F = Film
SeriesPPS
Metallized
F = Film
125
Metallized PPS
P
ChipPSize
Size
P =Chip
2220
S = 2820
P ==2220
W
4036
S = 5045
2820
Y
W
4036
Z ==6560
Y = 5045
Z = 6560
L
TR12KEMET
One world. One
F3082_LDB • 4/16/2015
J31
TR12
Size
Code
Packaging
Size CodeTable
See Dimension
See Dimension Table
1
Packaging
See
Ordering
Options Table
See Ordering
Options Table
102
J
050
V
SizeLCode
102Code (pF)
Capacitance
Capacitance
(pF)
First
two digitsCode
represent
significant figures. The third
First
two digits
represent
digit specifi
es number
of
significant fizeros.
gures. The third
zeros.
Rated050
Voltage
(VDC)
Rated Voltage
050 = 50
(VDC)
100 = 100
050 = 250
50
250
100 = 100
400
400
250 = 250
400 = 400
V
Packaging
Size
Code
See
Dimension
Table
See Dimension
Table
Capacitance
J
Tolerance
Capacitance
G = ±2%
Tolerance
R = ±2.5%
±2%
JG==±5%
R = ±2.5%
J = ±5%
Packaging
See
Ordering
Options Table
See Ordering
Options Table
F3083_SMC • 4/16/2015
1
F3083_SMC • 4/16/2015
1
81
•
•
•
•
•
•
•
•
Rated voltage: 100 – 630 VDC
Rated voltage: 63 – 350 VAC
Capacitance range: 0.00047 – 0.68 µF
EIA size: 2824 – 6560
Capacitance tolerance: ±2%, ±2.5%, ±5%, ±10%
Climatic category: 55/125/56
Film Capacitors
Surface Mount
General
Pulse
Transient
Suppression
Metallized Polyphenylene
Sulfide
(PPS)
(cont.)
General Purpose,
Purpose,
Pulse and
and DC
DC
Transient
Suppression
SMP253
Metallized
Paper,
SMP253
Series
Metallized
Impregnated
Paper,
Class Y2,
Y2,
SPC Series Encapsulated
DoubleSeries
Metallized,
Size 2824Impregnated
– 6560, 100 – 630
VDC Class
Capacitance Range: 470 pF250
to
0.68
μF
•
Temperature
Range:
−55°C
to
+125°C
VAC,
Surface
Mount
Device
250 VAC, Surface Mount Device
Legacy
LegacyPart
PartNumber
NumberSystem
System
Overview
SPC
Overview
7.3
471
K
Applications
100
Applications
K31
TR12
Capacitance Code
Capacitance
Rated Voltage
Chip Length (mm)
Packaging
Series
Size Code as electromagnetic
The
metallized
Typical
(VDC) include
The SMP253
SMP253 Series
Series is
is constructed
constructed of
of multilayer
multilayer(pF)
metallized paper,
paper,Tolerance
applications
include worldwide
worldwide use
use as electromagnetic
encapsulated
and
material
in
Y2
applications,
Double Metallized
7.3 in
First two digits
100
See
Table line-to-earth.
See Ordering
encapsulated
and impregnated
impregnated
self-extinguishing
materialG = ±2% interference
interference suppressor
suppressor
in all
all
Y2Dimension
applications,
line-to-earth.
PPS requirements of10.2
250
Options Table
represent significant H = ±2.5%
meeting
UL
meeting the
the requirements of12.7
UL 94
94 V–0.
V–0.figures. The third digit J = ±5%
400
630
16.5
specifies number of K = ±10%
zeros.
Y2 Class
Benefi
ts
Benefi
ts
New
Part
New KEMET
KEMET
PartNumber
NumberSystem
System
•• Approvals:
ENEC,
CSA
•• Excellent
self-healing properties
ensure
long
Approvals:
ENEC, UL,
UL,
CSA
Excellent
properties
ensure100
long life
life even
even when
when
F voltage:
127
S
G
471 self-healing
K voltages
V
•• Rated
250
VAC
50/60
Hz
subjected
to
frequent
over
Rated voltage: 250 VAC 50/60 Hz
subjected to frequentCapacitance
over voltages Rated Voltage
•• Capacitor
Capacitance
0.001
•• Good
resistance
due to impregnated dielectric
Class range:
Series
ChipµF
Size
Size Code
Capacitance
(pF) to
Packaging
Capacitance
range:
0.001 –– 0.0047
0.0047
µF
GoodCode
resistance
to ionization
ionization
dielectric
Tolerancedue to impregnated
(VDC)
•• Size
code:
5045,
12.7
mm
•
High
dV/dt
capability
Size
mm S = 2824
capabilityG = ±2%
F = code:
Film 5045, 12.7
Double
See Dimension
First •twoHigh
digitsdV/dt
represent
100
See Ordering
•• Capacitance
±20%
•• Impregnated
paper
Table
Metallized PPS
significant
figures. The third
= ±2.5%excellent
250 and
Options Table
Capacitance tolerance:
tolerance:
±20% W = 4036
Impregnated
paper Rensures
ensures
excellent stability
stability
and reliability
reliability
Y =IEC
504560068–1
digit specifi
es numberparticularly
of
J = ±5%
400continuous operation
•• Climatic
properties,
in
Climatic category:
category: 40/100/56/B,
40/100/56/B,
IEC
60068–1
properties,
particularly
in applications
applications with
with
continuous operation
Z = 6560 with IEC 60286–3
zeros.
K = ±10%
630
•• Tape
and
reel
packaging
in
accordance
•• RoHS
RoHS Compliant
Compliant and
and lead-free
terminations
•• Operating
temperature
Operating temperature range
range of
of -40˚C
-40˚C to
to +100˚C
+100˚C
•• 100%
screening
factory
test
at
3,000
VDC
100%
screening
factory
test
at
3,000
VDC
F3084_SPC • 4/16/2015
1
•• Highest
possible
safety
regarding
active
and
passive
Highest possible safety regarding active and passive
flflammability
ammability
SMP253 Series Metallized Impregnated Paper, 250 VAC
Capacitance Range: 1,000 to 4,700 pF • Temperature Range: −40°C to +100°C
Legacy
Legacy
Part
Number
System
LegacyPart
PartNumber
NumberSystem
System
SMP253
SMP253
M
M
A
A
4100
4100
M
M
Series
Series
Rated
Rated Voltage
Voltage (VAC)
(VAC)
Chip
Chip Length
Length (mm)
(mm)
Capacitance
Capacitance Code
Code (pF)
(pF)
Y2,
Y2, Metallized
Metallized Paper
Paper
M == 250
250
M
A
A == 12.7
12.7
Digits
Digits 22 –– 4(3)
4(3) indicates
indicates the
the fifirst
rst
three
three digits
digits of
of the
the capacitance
capacitance
value.
value. First
First digit
digit indicates
indicates the
the
total
total number
number of
of digits
digits in
in the
the
capacitance
value.
capacitance value.
Lead
Lead and
and
Packaging
Packaging Code
Code
M
M == ±20%
±20%
See
See Ordering
Ordering
Options
Options Table
Table
New
New KEMET
KEMETPart
PartNumber
NumberSystem
System
New
KEMET
Part
Number
System
P
P
101
101
AA
AA
102
102
Capacitor
Capacitor Class
Class
Series
Series
Chip
Chip Size
Size
Capacitance Code
Code (pF)
(pF)
Capacitance
P
P == Paper
Paper
Y2,
Y2, Metallized
Metallized
Paper
Paper
See
See Dimension
Dimension
Table
Table
First
First two
two digits
digits indicate
indicate the
the two
two
most
most signifi
significant
cant digits
digits of
of the
the
capacitance
value
in
picofarads.
capacitance value in picofarads.
The
The third
third digit
digit is
is the
the number
number of
of
following
following zeros.
zeros.
M
M
Capacitance
Capacitance
Tolerance
Tolerance
M
M == ±20%
±20%
©
© KEMET
KEMET Electronics
P.O. Box
Box 5928
Greenville, SC
SC 29606
29606 (864)
(864) 963-6300
www.kemet.com
82
TR24
TR24
Capacitance
Capacitance
Tolerance
Tolerance
250
250
Rated
Rated Voltage
Voltage
(VAC)
(VAC)
250
250 == 250
250
V
V
Lead
Lead and
and
Packaging
Packaging Code
Code
See
See Ordering
Ordering
Options
Options Table
Table
One
One world.
world. One
One KEMET
KEMET
F3018_SMP253_Y2_250
F3018_SMP253_Y2_250 •• 4/16/2015
4/16/2015
11
• PP metallized
and PET double-sided metallized foil
Power
Film Capacitors
C4DR Series, GTO Snubbing,
400 – 3,000 VDC/160 – 1,000 VAC
Film Capacitors
Power & Application Optimized – Power Film
Applications
Overview
Axial
C4C Series, Axial Round, 850 – 3,000 VDC/450 – 750 VAC
Part
Capacitance Range: 0.0068Benefi
to 2.5Number
μF
ts • Temperature
C4
Series
C
A
M
Type
Fire
Protection
Rated Voltage
(VDC)
U
B
3100
Insulation
Lead Diameter
(mm)
Capacitance Code
(pF)
C4 = MKP
capacitors
Printed
C = Round
A = No fire
M = 850
U = Polyester B = 0.8
body,
retardant
P = 1,200
tape & resin C = 1.0
Circuit Board
Film
snubberMount
S =Power
Fire
W =Capacitors
2,000
protection
D = 1.2
application
retardant (on Y = 3,000
0=
request)
Uninsulated
(on request)
AA
0
Digits 2 – 4 indicate
the first three digits
of the capacitance
value.
the number of zeros
to be added.
AA (Standard)
0 = 33
1 = 44
3 = 58
C4G Series, Axial Round, 250 – 850 VDC/160 – 450 VAC
Overview
Benefits
J
Lead and
Capacitor
Tolerance
Packaging Code Length (mm)
J = 5%
K = 10%
Applications
C4DC Series, GTO Snubbing,
850 is– a1,400
VDC/500
– 700
The C4G Series
polypropylene
metallized
film VAC
with polyester
Typical applications include clamping, blocking, coupling/
decoupling, AC harmonic filtering and low power.
System
filled
withRange:
resin and−40°C
tinned to
copper
wires.
6tape
μFwrapping
•Number
Temperature
+85°C
C4DC
M
A
Q
4150
Rated Voltage
Series
Case
Terminal Style
(VDC)
C4DC = MKP,
M = 850
A = Axial plastic
Q = M8 Threaded
GTO Application
N = 1000
case
Inserts
R = 1400
capacitance value.
number of zeros to be added.
AA0
J
F3042_C4C_AXIAL • 4/16/2015
Internal Code
Tolerance
AA0 = Standard
1
J = 5%
K = 10%
Benefits
• Self-healing
• Low losses
C4DR Series, GTO Clamping,
400 – 3,000 VDC/160 – 1,000 VAC
• High
current
Part
System
μF Number
• ripple
Temperature
©
Electronics
• KEMET
High contact
reliability
• Suitable
C4DRfor high frequency
F applications A
Q
5250
• PP metallized
Rated Voltage
Series
C4DR = MKP,
Clamping
Application
(VDC)
F = 400
H = 600
J = 700
M = 850
P = 1,200
S = 1,500
Y = 3,000
• 4/16/2015
AA0
J
Case
Terminal Style
Internal Code
Tolerance
A = Axial plastic
case
Q = M8 threaded
inserts
capacitance value.
number of zeros to be added.
AA0 = Standard
J = 5%
K = 10%
C4G Series, Axial Round,
250
– 850Corporation
VDC/160
450
© KEMET
Electronics
• P.O.–
Box
5928 VAC
• 4/16/2015
System
40 μFNumber
• Temperature
C4
G
A
D
U
Series
Type
Fire
Protection
Rated Voltage
(VDC)
Insulation
C4 = MKP
capacitors
G = Round
body,
switching
application
A = No fire
retardant
S = Fire
retardant (on
request)
D = 250
F = 400
H = 600
J = 700
M = 850
B
4100
Lead
Capacitance Code
Diameter (mm)
(pF)
U = Polyester B = 0.8
tape & resin C = 1.0
protection
D = 1.2
0=
Uninsulated
(on request)
the first three digits
of the capacitance
value.
the number of zeros
to be added.
1
AA
4
1
J
Lead and
Capacitor
Tolerance
Packaging Code Length (mm)
AA (Standard)
4 = 20.5
5 = 28
0 = 33
1 = 44
3 = 58
J = 5%
K = 10%
F3040_C4G_AXIAL • 4/16/2015
831
•
•
•
•
High ripple current
High capacitance density
High contact reliability
Suitable for high frequency applications
Film Capacitors
Power Film Capacitors
C4AT Series, 2 or 4 Leads, 250 – 850 VDC/160 – 450 VAC
Radial
C4AE Series, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link
Part
System
μF Number
• Temperature
Overview
C4
A
E
Benefits
Series
C4 = MKP
A = Box
Capacitors
- Wire
Power
Film Capacitors
Terminals
G
E = DC
Link
B
Applications
W
4
4
5
0
A
Capacitance Code
(pF)
DC Voltage
Case Code
Terminals Code
E = 300 V
G = 450 V
H = 600 V
I = 800 V
J = 700 V
K = 750 V
L = 500 V
M = 850 V
N = 1000 V
O = 900 V
Q = 1100 V
U = 1300 V
B = Box
U = Single
plastic case copper wire
W = Double
copper wire
Z = Special wire
1
Variants
Digits 9, 10, &
11 indicate the
first 3 digits of
capacitance
value.
Digit 8 indicates
the number
of zeroes that
must be added
to obtain rated
Applications
capacitance in pF.
A=
Standard
B = Special
H1 = 100°C
C4BS Series, IGBT Box, 850 – 3,000 VDC/550 – 750 VAC
Overview
W
J
Terminals
Diameter Case Letter 2 Tolerance
(mm)
1 = 0.8
2=1
3 = 1.2
0, A, B,
C, D, E,
F, G, H,
J, L, M,
N, W, X,
Y, 1, 2
J = 5%
K = 10%
It is not possible to manufacture every part number which could be created from coding description. Please refer to table of standard part numbers and ask KEMET
for other possibilities.
1
True 100°C
Benefi
tshigh temperature film with no voltage derating available on request
2
Please see Dimension Table
C4AS Series, 2 or 4 Leads, 850 – 3,000 VDC/500 – 750 VAC
Number
System
to 5 μF
• Temperature
C4
AS
Series
Type
C4 = MKP
Capacitors
AS = Radial
box, snubber
application
M
Rated Voltage
(VDC)
M = 850
N = 1,000
P = 1,200
W = 2,000
Y = 3,000
B
U
Number of
Leads
U = 2 lead
W = 4 lead
Case
B = Plastic
box with
epoxy resin
sealing
3150
capacitance value.
added.
• 4/16/2015
A3F3046_C4AE_RADIAL
A
J
Lead Diameter
(mm)
A1 = 0.8
A3 = 1.2
Benefi
ts – 850 VDC/160 – 450 VAC
C4AT Series, 2 or 4 Leads,
250
Series
C4 = MKP
Capacitors
AT
D
Rated Voltage
Type
(VDC)
AT = Radial
D = 250
box, switching F = 400
application
G = 450
H = 600
J = 700
M = 850
B
U
Number of
Leads
U = 2 lead
W = 4 lead
Case
B = Plastic
box with
epoxy resin
sealing
4100
capacitance value.
added.
Lead Diameter
(mm)
A1 = 0.8
A3 = 1.2
C4BS Series, IGBT Box, 850 – 3,000 VDC/550 – 750 VAC
Series
C4 = MKP
Capacitors
for Power
Applications
BS
M
B
Rated Voltage
Type
Case
(VDC)
BS = Radial M = 850
B = Plastic
box with tab N = 1,000
box with
terminals,
P = 1,200
epoxy resin
IGBT
W = 2,000
sealing
application
Y = 3,000
X
Number of
Leads
X=
Standard
3470
capacitance value.
added.
Z
0
J
Size Code
Tolerance
See
Dimension
Table
1
J = 5%
K = 10%
©
Corporation
• P.O. Box
Number
System
toKEMET
5 μF
•Electronics
Temperature
Range:
−40°C
to +85°CSC 29606 (864) 963-6300 • www.kemet.com
C4
J = 5%
K = 10%
• 4/16/2015
A3
See
Dimension
Table
Tolerance
KEMET
Corporation
• P.O. Box
Number
System
Capacitance Range: 0.22 to©Part
60
μF
•Electronics
Temperature
Range:
−40°C
to +85°CSC 29606 (864) 963-6300 • www.kemet.com
C4
Size Code
1
• 4/16/2015
E
Termination
Internal Code
Style
Z=
A = Style A
Standard
B = Style B
E = Style E
F = Style F
G = Style G
E
J
Size Code
Tolerance
See
Dimension
Table
J = 5%
K = 10%
1
84
• 4/16/2015
1
C44A Series, Aluminum Case, 400 – 1,500 VDC
Film Capacitors
Applications
Overview
Radial (cont.)
C4BT Series, IGBT Box, 400 – 850 VDC/250 – 450 VAC
System
Capacitance Range: 1 to 60Part
μF •Number
Temperature
Benefits
C4
BT
F
Power Film Capacitors
Series
B
X
Rated Voltage
Type
Case
(VDC)
BT = Radial F = 400
B = Plastic
box with tab M = 850
box with
terminals,
epoxy resin
switching
sealing
application
4330
Number of
Leads
X=
Standard
Z
E
E
Termination
Capacitance Code (pF) Internal Code
Style
Z=
A = Style A
the first three digits of
Standard
E = Style E
added.
C44B
Series, Aluminum Case Snubber Application,
C4 = MKP
Capacitors– 2,400 VDC
1,200
for Power
Applications
J
Size Code
Tolerance
See
Dimension
Table
J = 5%
K = 10%
Applications
Overview
Screw/Faston Terminal
Benefits
• 4/16/2015
C4DE Series, Low Inductance DC Link, 400 – 1,000 VDC
1
PartμFNumber
System
• Temperature
C4DE
Series
C4DE = MKP, DC
Link Application
F
P
Rated Voltage
(VDC)
F = 400
H = 600
I = 800
N = 1,000
Q
Case & Fixing
Bolt Code
P = Cylindrical
plastic case with
fixing feet
6175
Terminal Style
Q = M8 threaded
inserts
Capacitance Code
(pF)
zeros to be added.
A8T
K
Internal Code
Tolerance
A8T = Standard
K = 10%
C44A Series, Aluminum Case, 400 – 1,500 VDC
Benefi
ts
Part
System
μF Number
• Temperature
C44A
Series
C44A = MKP,
General Purpose
F
Rated Voltage
(VDC)
F = 400
H = 600
J = 700
M = 850
P = 1,200
S = 1,500
F
Case & Fixing
Bolt Code
F = Cylindrical
aluminum case
with M8 bolt
G = Cylindrical
aluminum case
with M12 bolt
P
Terminal Style
P = M6 Threaded posts
R = M10 Threaded posts
Q = M8 Threaded posts (on
request)
2 = Simple faston 6.3 x 0.8
mm (on request)
3 = Double faston 6.3 x 0.8
mm (on request)
5150
Capacitance Code
(pF)
capacitance value.
added.
ZA0
Internal Code
ZA0, ZB0, ZC0,
ZD0, ZE0, ZF0,
ZG0, ZH0 =
Standard
C44B Series, Aluminum Case, Snubber Applications, 1,200 – 2,400 VDC
Series
C44B = MKP,
Snubber
Application
P
F
Case & Fixing
Bolt Code
F = Cylindrical
aluminum case
with M8 bolt
G = Cylindrical
aluminum case
with M12 bolt
001
Terminal Style
P = M6 Threaded posts
1 = Single fasten 2.8 x 0.8
mm
Tolerance
J = 5%
K = 10%
• 4/16/2015
Part
System
4 μFNumber
• Temperature
Rated Voltage
(VDC)
P = 1,200
W = 2,000
X = 2,400
1
J
C44B
• 4/16/2015
3100
Capacitance Code
(pF)
capacitance value.
added.
ZB0
J
Internal Code
Tolerance
ZA0, ZB0, ZC0 =
Standard
1
J = 5%
K = 10%
• 4/16/2015
1
85
The C44P/C20A Series are a polypropylene metallized film with
cylindrical aluminium can type filled with oil, screw terminals,
plastic insulator and overpressure safety device.
Typical applications include commutation, power factor correction
and AC harmonic filtering.
Film Capacitors
Aluminum Can Power Film Capacitors
BenefitsSeries, 700 – 1,300 VDC, for DC Link
C44U
Screw/Faston Terminal (cont.)
• Overpressure safety device
C44H Series, 330 – 440Overview
700current
– 1,000
VDC, for PFC and AC Filter
• VAC,
High peak
capability
Number
System
• Temperature
Range:
−40°C
to +75°C
•600
HighµF
torque
screw
terminals
with plastic
insulator
Applications
• Long
lifetime
The
C44U
Series is a polypropylene segmented metallized
Typical applications include DC filtering and energy storage.
C44H
L
G filled with resin,
P screw
6100
A
A
S
J
fi• lmSelf-healing
with
cylindrical aluminium
can type
Case & Fixing
terminals
and
plastic
deck.
Terminal Style
Internal Code
Internal Code
Tolerance
Series
Rated Voltage
Bolt Code
C44H = MKP
L = 330 Vrms
Power
FilmforCapacitors
Capacitors
K = 440 Vrms
AC filtering
G = Cylindrical
aluminum case
with M12 bolt
P = M6
Threaded Posts
R = M10
capacitance value.
Threaded Posts Digit 8 indicates the number
C93 Series, Aluminum Case Filter Applications,
400 – 600 VDC
A = Standard
Z = Special
J = 5%
K = 10%
Benefits
Applications
Overview
• Controlled self-healing
C44P/C20A Series, for •PFC
& AC Filter, 330 – 1,000 VAC/700 – 2,300 VDC
Low losses
System
μFNumber
• Temperature
•Part
High
ripple
current
• High capacitance density
C lifetime
44
• Long
P
L
G
R
AC Filter
P = C44
A = C20
For C44P: For C20A:
L = 330
K = 550
K = 440
L = 640
Q = 780
Z = 1000
G=
M12
bolt
R = Male
M10
6
1
0
0
A
A
S
J
F3054_C44H_RADIAL • 4/16/2015
1
Internal
Case Terminal
Tolerance
Capacitance Code (pF) Internal Code
Series
Application Rated Voltage (VAC)
Codes
Type
Style
MKP
Capacitors
for Power
Applications
44 = 330 – 440 VAC
20 = 550 – 1,000
VAC
the first 3 digits of
capacitance value. Digit
8 indicates the number
of zeros that must be
added to obtain rated
capacitance in pF.
A = Standard
Z = Special
J = 5%
K = 10%
C44U Series, for DC Link, 700 – 1,300 VDC
PartμFNumber
System
• Temperature
Benefits
C4
4
U
Q
G
T
6
DC Voltage
Case & Fixing
Terminals Code
J = 700 V
O = 900 V
Q = 1100 V
U = 1300 V
G = Cylindrical
case with
threaded bolt
M12
5
0
0
Series
MKP
Cylindrical
Capacitors
types
for Power
Applications
DCLink
E = Cylindrical
case without
threaded bolt
T = M6 female Digits 9, 10, & 11 indicate
terminals
the first 3 digits of
Q = M8 male
capacitance value.
terminals
Digit 8 indicates the
Y = M8 female number of zeroes that
terminals
must be added in order to
obtain rated capacitance
in pF.
F
8
A = 85°C
Hot Spot
temperature
series
F = 70°C
Hot Spot
temperature
series
7 = 76
mm
8 = 85
mm
S
K
T=
Standard
film
S=
Segmented
film
J = 5%
K = 10%
F3050_C44P_RADIAL • 4/16/2015
1
Case
Film Type Tolerance
Variants
Diameter
C93 Series, Aluminum Case, Filter Applications, 400 – 600 VDC
PartμFNumber
System
• Temperature
© KEMET
• P.O. BoxZ5928 • Greenville,GSC 29606 (864) 3
C93Electronics Corporation
0
5500
Series
C93 = Single
Phase
Power Factor
Correction
Capacitors
Rated Voltage
(VAC)
0 = 320
1 = 415
3 = 460
Internal Code Case & Mounting Terminal Style
Z = Standard
G = Cylindrical
aluminum case
with M12 bolt
3 = Double
fasten
F3049_C44U_RADIAL
• 4/16/2015
ZA0
X
Capacitance Code
(pF)
zeros to be added.
Internal Code
Tolerance
ZA0, RA0
& RS0 =
Standard
X = -5/+15%
1
86
• 4/16/2015
1
Film Capacitors
Power & Application
Power Optimized
Film Capacitors – Power Film/Motor Run Applications
C87 Series, Aluminum Case, 470 VAC
Screw/Faston Terminal (cont.)
C9T Series, Aluminum Case, PFC & AC Filter, 415 – 690 VAC
184.8Number
μF • Temperature
Applications
Overview
C9Tts
Benefi
S
5
Series
Type
C9T =
Cylindrical
Three-Phase
Capacitors
S = Slim
Rated Voltage
(VAC)
A = 525
D = 690
5 = 415
6 = 450
A
D
Terminal Style
A = Single
quick connect
B = Double
quick connect
M = Screw
Terminal
5308
Internal
Connection
D = Delta
Y = Star
Capacitance Code
(pF)
zeros to be added.
AA0
X
Internal Code
Tolerance
AA0 =
Standard
X = -5% /
+15%
C27 Series, Plastic Case, 425 – 450 VAC
Part
μF Number
• Temperature
Range:
+100°CSC 29606 (864) 963-6300 • www.kemet.com
© KEMET
ElectronicsSystem
Corporation
• P.O. −25°C
Box 5928to
• Greenville,
C27
C27 =
Benefi
ts
Motor Run
Capacitors
4
A
C
Case & Fixing
Series
Marking
Bolt Code
4 = 30,000 hours/420
A = C274
C=
VAC (Class A) or 10,000
C = C276
Cylindrical
hours/470 VAC (Class B)
L = C277 plastic case
6 = 10,000 hours/420 VAC
with M8
(Class B) or 3,000 hours/470
bolt
VAC (Class C)
7 = 10,000 hours/275 VAC
(Class C) or 1,000 hours/425
VAC (Class D)
2
• 4/16/2015
4100
Capacitance Code
Terminal Style
(pF)
Digits 2 – 4
2 = Single fasten 6.3 x 0.8
3 = Double fasten 6.3 x 0.8 indicate the first
A = Polar cable (tinned end) three digits of
the capacitance
B = Polar cable (untinned
value.
end)
F = Bipolar cable (40 mm
First digit
unsheathed, 8 mm exposed indicates the
end)
number of zeros
to be added.
AA
4
1
J
Packaging Internal Use Tolerance
AA, AF,
AL, LG =
Standard
0, 1, 2, 5 =
Standard
J = 5%
C87 Series, Aluminum Case, 470 VAC
System
Capacitance Range: 1 to 80Part
μF • Number
Temperature
C87
0
Series
C87 =
Motor Run
Capacitors
C
Marking
0 = 10,000 hours/420 VAC
A, C, W =
(Class B) or 3,000 hours/470 Standard
VAC (Class C)
8 = 30,000 hours/420
VAC (Class A) or 10,000
hours/470 VAC (Class B)
1 = Legacy (not for new
design)
5 = Legacy (not for new
design)
F
Case & Fixing Bolt
Code
F = Cylindrical
aluminum can
with M8 bolt
G = Cylindrical
aluminum can
with M12 bolt
2
Terminal Style
2 = Single fasten
6.3 x 0.8
3 = Double fasten
6.3 x 0.8
4300
Capacitance Code
(pF)
Digits 2 – 4
indicate the first
three digits of the
capacitance value.
the number of
zeros to be added.
AA
4
• 4/16/2015
1
J
Packaging Internal Use Tolerance
AA=
Standard
0, 1, 2, 4, 5
= Standard
J = 5%
K = 10%
• 4/16/2015
1
87
(275 VAC), IEC 60068–1
Overview
Overview
The PMR205 Series is constructed of multilayer metallized paper
• Operating
range: -55˚C
to +100˚Cmetallized
and -40˚Cpaper
to
The
PMR205temperature
Series
is constructed
of multilayer
encapsulated
and impregnated
material
+100˚C (275and
VAC)
encapsulated
impregnated
in
self-extinguishing
material
Applications
Applications
Film Capacitors
Typical applications include worldwide use in contact protection,
Typical
worldwide
use in contact
protection,
contact applications
interference include
suppression
and transient
suppression.
contact interference suppression and transient suppression.
Power & Application Optimized – High Voltage Transient Suppression
Radial
Benefits
AC
Line ts
EMI Suppression and RC Networks
Benefi
P409
Series
Metallized
Impregnated
F43 Series, Integrated Resistor
Metallized
Polypropylene,
250 – 630Paper
VDC•• High
•• Rated
voltage:
125 VAC/250
dV/dt capability
Capacitance
range:
0.1 – 1.0 VDC,
µF 50/60 Hz
Impregnated
paper ensures excellent stability and reliability
• Rated voltage: 125 VAC/250 VDC, 50/60 Hz
Part
Number
System
Capacitance Range: 0.01 toClass
μF
• X2,
Temperature
•• 1.0
Capacitance
range:
0.1VAC
–Range:
1.0 µF −55°C to +100°C
275
Capacitance
tolerance:
±20%
PMR205 Series
• properties,
Impregnatedparticularly
paper ensures
excellent stability
and reliability
in applications
with continuous
operation
•• Capacitance
tolerance:
±20%
properties,
particularly
in
applications
with
continuous
operation
Resistance
range:
22
–
680
Ω
F
43
K
N
3100
XX
01
M
•• Resistance
Resistance tolerance:
range: 22 –±30%
680 Ω
Rated Voltage
Lead and
Capacitance
•Overview
Resistance
tolerance:
±30%
Lead Spacing (mm) Capacitance
Code (pF)
Internal Use
Class
Applications
• Capacitor
Lead
spacing:
15.2Series
– 25.4
mm (VAC)
Packaging Code
Tolerance
•• Lead
spacing:
15.240/085/56/B,
– 25.4 mm IEC 60068–1
Climatic
category:
Legacy PN: F
RC Snubber,
I = 160
I = 15.0
Contact KEMET
00, 01, 04
K = ±10%
The
P409
is constructed
of IEC
multilayer
metallized paper
•• New
Climatic
category:
40/085/56/B,
60068–1
include
worldwide(Standard)
use in contactMprotection,
Tape
andSeries
reel
KEMET
PN: packaging
Metallizedin accordance
M = 200with IEC 60286–2
N = 22.5
the Typical
first threeapplications
digits of
for packaging
= ±20%
encapsulated
andpackaging
impregnated
in terminations
self-extinguishing
material
•• Omit
Tape
reel
in accordance
interference
suppression
thisand
character
Polypropylene
P = 220 with IEC 60286–2
R = 27.5
the contact
capacitance
value.
availability
and and transient suppression.
RoHS
Compliant
and lead-free
=V–0.
275 (X2)
details
requirements
of UL of
94Kterminations
• Operating
RoHS the
Compliant
and lead-free
•meeting
temperature
range
-40˚C
to +85˚C
Operatingself-healing
temperatureproperties
range of -40˚C
+85˚Clong life even
•• Excellent
whichtoensure
added.
• when
Excellent
self-healing
properties
which ensure long life even
subjected
to frequent
over voltages
• when
Good subjected
resistancetotofrequent
ionizationover
duevoltages
to impregnated paper dielectric
• Good
resistanceMetallized
to ionization due
to impregnated paper
dielectric
Integrated
Resistor
Impregnated
Paper,
125 VAC/250 VDC
Benefits
•Legacy
Approvals:
ENEC,
UL, cULSystem
Part
Number
Legacy
Part
Number
System
• Rated
voltage: 275 VAC 50/60
Hz
PMR205
A
B
6100
M
033
R30
One
KEMET
• Capacitance
PMR205 range: 0.047A– 0.47 µF
B
6100
M
033 One world. Lead
R30and
Capacitance
Series
Rated Voltage
(VAC)
Lead •Spacing
(mm)
Capacitance
Code (pF)
Resistance
(Ω)
Electronics
Corporation
• P.O.
Box 5928
Greenville,
SC 29606
(864) 963-6300
• www.kemet.com
F3023_F43
•
4/16/2015
1
•© KEMET
Capacitance
tolerance:
±20%
Capacitance
Lead and
Tolerance
Packaging
Code
Series
Resistance (Ω)
• Resistance
range:
22
–
470
Ω
Tolerance
Packaging Code
RC Snubber,
A = 125
B = 15.2
Digits 2 – 4 (3) indicates
M = ±20%
Resistance Value
See Ordering
• Resistance
tolerance: ±30%
RC Snubber,
A = 125
B = 15.2
Digits
– 4 (3)digits
indicates
M = ±20%
Resistance
See Ordering
Metallized
Paper
C
20.3
the
first2three
of the
in Ω Value
Options
Table
Metallized
Paper 15.2 – 25.4 mm
C
20.3
the first three
digitsFirst
of the
in Ω
Options Table
E = 25.4
capacitance
value.
digit
• Lead
spacing:
E = 25.4
capacitance
First digit
indicates thevalue.
total number
of
indicates
total number
of
digits
in thethe
capacitance
value.
digits in the capacitance value.
New
KEMET
Part
System
•New
Operating
temperature
range
of -40˚C
to +85˚C
KEMET
PartNumber
Number
System
New
KEMET
Part
Number
System
• Excellent self-healing properties which ensure long life even
P subjected
405to frequent over
Q voltages E
104
M
125
A
H330
when
P
405
Q
E
104
M
125
A
H330
Lead Spacing
Lead and
• Capacitor
Good resistance
to
ionization
due
to
impregnated
paper
dielectric
Series
Size Code
Capacitance Code (pF) Capacitance Rated Voltage
Resistance (Ω)
Capacitor
Lead(mm)
Spacing
Lead and
Class
Tolerance
(VAC)
Packaging
Code
Series
Size Code
Resistance (Ω)
Class
(mm)
Tolerance
(VAC)
Packaging Code
P=
RC Snubber
Q =excellent
15.2
See and reliability
M = ±20%
125 = 125
See Ordering H + first two digits
• Impregnated
paper ensures
stability
P=
RC Snubber
Q
15.2
See
First
represent
M = ±20%
125 = 125
See Ordering
first two digits
Metallized
C = 20.3
Dimension
signifitwo
cantdigits
figures.
Third
Options
Table H +representing
properties,
particularly in applications
with
continuous
operation
Metallized
C
20.3
Dimension
signifi
cant fies
gures.
Third
Options Table signifi
representing
Paper
E = 25.4
Table
digit
specifi
number
of
cant figures.
Paper
E = 25.4
Table
digit specifi
es number of
zeros.
zeros.
signifidigit
cantspecifi
figures.
Third
es
Third
digitofspecifi
number
zeros.es
number of zeros.
P409 Series Integrated©Resistor
Metallized
Paper,
Class
X2, 275
VAC
KEMET Electronics
Corporation •Impregnated
P.O. Box 5928 • Greenville,
SC 29606
(864) 963-6300
• www.kemet.com
One world.• One
KEMET 1
F3024_PMR205
4/16/2015
F3024_PMR205 • 4/16/2015
1
Electronics
P.O. Box 5928
• Greenville,
SC 29606 (864) 963-6300 • www.kemet.com
System
Capacitance Range: 0.047 ©Part
toKEMET
0.47Number
μF
• Temperature
−40°C
to +85°C
P
Capacitor
Class
P=
Metallized
Paper
409
Q
Series
Lead Spacing
(mm)
RC Snubber
Q = 15.2
C = 20.3
E = 25.4
M
473
M
Size Code
Capacitance
Tolerance
See
Dimension
Table
zeros.
275
M = ±20%
275 = 275
See Ordering
Options Table
H470
Resistance (Ω)
representing
significant
specifies number
of zeros.
88
A
Rated Voltage
Lead and
(VAC)
Packaging Code
F3089_P409_X2_275 • 4/16/2015
1
• Excellent self-healing properties which ensure long life even
Overview
Applications
when subjected to frequent over-voltages
•Overview
Good resistance to ionization due to impregnated paper dielectric Applications
Film Capacitors
The
PMZ2035
Series is constructed of multilayer metallized
• High
dV/dt capability
The
PMZ2035
is constructed
ofinmultilayer
metallized
paper
encapsulated
impregnated
self-extinguishing
• ImpregnatedSeries
paperand
ensures
excellent
stability
and
reliability
paper
encapsulated
and
impregnated
in
self-extinguishing
material
meeting
the
requirements
of
UL
94
V–0.
Typical applications include worldwide use in contact protection,
worldwide
use in contact
protection,
contact
interference include
suppression
and transient
suppression.
contact interference suppression and transient suppression.
Power & Application Optimized – High Voltage Transient Suppression
Radial (cont.)
Benefits
Benefits
P410 Series, Integrated• 100
Ω Resistor
Metallized Impregnated Paper, •300
Approvals:
ENEC
HighVAC
dV/dt capability
System
Approvals:
ENEC
440
VDC 50/60
Hz −40°C to +85°C
Capacitance Range: 0.022 •Part
toRated
0.1Number
μFvoltage:
• Temperature
Range:
High dV/dt capability
• Impregnated
paper ensures excellent stability and reliability
• Capacitance:
Rated voltage:0.1
440
• properties,
Impregnated
paper ensures
excellent stability
and reliability
µFVDC 50/60 Hz
particularly
in applications
with continuous
operation
P
M on request 223
A continuousH101
Capacitance:
0.1410
µF ±10%,Qother tolerances
properties, M
particularly in300
applications with
operation
• Capacitance
tolerance:
Capacitance
tolerance:
±10%,
• Resistance:
150
Ω
Capacitor
Lead Spacing
Lead and
Series
Size Code
Resistance (Ω)
Class
Tolerance
(VAC)
Packaging Code
Resistance:
150 Ω ±30% (mm)
• Resistance
tolerance:
Resistance
tolerance:
• Lead
mm±30%Q = 15.2
P=spacing:
RC25.4
Snubber
See
M = ±20%
300 = 300
See Ordering H + first two digits
Metallized
C = 20.3
Dimension
Options Table
representing
• Climatic
Lead
spacing:
25.440/085/56/B,
mm
category:
IEC 60068–1
Paper
E = 25.4
Table
significant
Climatic
category:and
40/085/56/B,
IEC 60068–1
• RoHS
Compliant
zeros.
RoHS Compliant
and lead-free
• Operating
temperature
-40˚C to +85˚C
specifies number
of zeros.
Operatingself-healing
temperatureproperties
range of -40˚C
+85˚Clong life even
• Excellent
which to
ensure
• when
Excellent
self-healing
properties
which ensure long life even
subjected
to frequent
over voltages
when subjected
• Good
resistancetotofrequent
ionizationover
duevoltages
to impregnated paper
• dielectric
Good 100
resistance
to ionizationMetallized
due to impregnated
paper
PMZ2035 Series, Integrated
Ω Resistor
Impregnated
Paper, 440 VAC/1,000 VDC
© KEMET
F3090_P410_X1_300 • 4/16/2015
1
dielectric
Capacitance Range: 0.1 μF • Temperature Range: −40°C to +85°C
Legacy
LegacyPart
PartNumber
NumberSystem
System
PMZ2035
PMZ2035
Series
Series
RC Snubber,
Metallized
Paper
RC Snubber,
R
E
E
6100
6100
K
Rated R
Voltage
(VAC)
Rated
Voltage
Lead Spacing (mm)
R(VAC)
= 440
Lead Spacing (mm)
E = 25.4
R = 440
E = 25.4
Digits 2 – 4 (3) indicates the first
three
digits
capacitance
Digits
2 –of4 the
(3) indicates
the value.
first
First digit
the total number
three
digitsindicates
of the capacitance
value.
of digits
the capacitance
value.
First
digit in
indicates
the total number
Metallized Paper
K
Capacitance
Tolerance
Capacitance
KTolerance
= ±10%
M
K == ±20%
±10%
M = ±20%
150
150
Resistance (Ω)
Resistance (Ω)
Resistance Value
in Ω Value
Resistance
in Ω
R30
R30
Lead
and
Packaging
Code
Lead and
Packaging
Code
See Ordering
Options
Table
See Ordering
Options Table
of digits in the capacitance value.
New KEMET
KEMETPart
PartNumber
NumberSystem
System
New
P
P
Capacitor
Class
Capacitor
435
435
Series
Series
Class
P = Metallized
RC Snubber
P = Paper
Metallized RC Snubber
Paper
E
E
Lead Spacing
Lead(mm)
Spacing
E (mm)
= 25.4
E = 25.4
J
J
104
104
Size Code
Size Code
See
Dimension
See
Table
Dimension
signifitwo
cantdigits
figures.
Third
First
represent
digit
specifi
number
of
signifi
cant fiesgures.
Third
zeros.
digit specifi
es number of
Table
zeros.
K
K
Capacitance
Tolerance
Capacitance
KTolerance
= ±10%
M
K == ±20%
±10%
M = ±20%
440
A
H151
H151
Rated440
Voltage
LeadAand
Resistance (Ω)
(VAC)
Code
Rated
Voltage Packaging
Lead and
Resistance (Ω)
(VAC)
Code H + first two digits
440
= 440 Packaging
See Ordering
Options
Table H +representing
440 = 440
See Ordering
first two digits
cant figures.
Options Table signifi
representing
Third
es
signifidigit
cantspecifi
figures.
number
zeros.es
Third
digitofspecifi
number of zeros.
One world.• One
KEMET1
F3027_PMZ2035
4/16/2015
F3027_PMZ2035 • 4/16/2015
1
89
Overview
Benefits
Applications
The
F5B
Series is
a metallized
(MKT)
film capacitor
• Low
inductive
MKT
capacitorspolyester
in parallel
construction
with a
with
an
integrated
suppression
diode
encapsulated
a
ceramic varistor in a single case provide superior in
suppression
thermosetting
resin-filled plastic box with tinned wire leads. Box
results
material
is
solvent
resistantISO
and7637
flame retardant meeting the
• Approvals: AEC–Q200,
requirements
of
UL
V–0.
Low
Voltage
Transient
Suppression
• Rated
voltage:
1894
– 63
VDC
Film Capacitors
applications
include
worldwide
• Typical
Capacitance
tolerance:
±10%,
±20% use as EMI/RFI and
advanced
transient
voltage
suppressors
for automotive motors
• Climatic category: 55/125/56 IEC 60068–1
and
other
suppression
applications
such
as engine
blower
• Tape and reel packaging in accordance with
IEC 60286–2
fans,
central
locking
systems,
heating/air-conditioning
blowers,
electric
sun
roofs,
electric
window
regulators,
fuel/oil
pumps,
• Operating temperature range: -55˚C to +125˚C
electric windshield wipers and electrically operated seats. This
through-hole EMI/RFI suppression element is mainly used for
automotive applications without a printed circuit board, e.g.,
63 VDC
motor suppression or mixed through-hole and surface mount
printed circuit boards.
Power & Application Optimized – Low Voltage Transient Suppression
F5D Series Metallized Polyester Film
with Integrated Ceramic Capacitor, 63 – 100 VDC
F5A Series Metallized Polyester Film with Integrated Varistor, 18 –
Radial
• Capacitance range: 0.1 μF to 2.2 μF
• Lead spacing: 5 – 10 mm
PartμFNumber
System
Capacitance Range: 0.1 to 2.2
• Temperature
Overview
Applications
F5A
H
C
4100
DQ
A
6
K
Benefi
ts Rated Voltage Lead Spacing
Lead and
Varistor Voltage
Capacitance
The Series
F5D Series is a metallized polyester (MKT)Capacitance
film
useCode
as EMI/RFI
Code (pF) Typical applications include worldwideSize
(VDC)
F5B Series Metallized
(mm)
Packaging Code
V @ 1 mA
Tolerance
v
with integrated
ceramicincapacitor
encapsulatedwith
in aa
suppressors
for automotive
motors and other suppression
•capacitor
LowFilm
inductive
MKT
capacitors
construction
B = 18
Cparallel
=5
the • Lead
See spacing:
Ordering 5 mmSee Varistor
See Dimension
K = ±10%
thermosetting
resin-fi
lled
plastic
box
with
tinned
wire
leads.
Box
applications
such
as
engine
blower
fans,Table
central locking
Capacitor/
H = 25 transient
F =voltage
10
first threediode
digits of
Options Tabletolerance:
Voltage
Table
M =systems,
±20%
high
power bidirectional
suppressor
in the • Capacitance
±10%,
±20%
material
solvent
and flsuppression
ame retardant
meeting the
blowers,
sun roofs, electric
Jresistant
= 30 superior
capacitance
value. First • heating/air-conditioning
a Ceramic
singleis case
provide
results
Climatic category: 55/125/56,
IECelectric
60068-1
Varistor Unit of ULN94
= 45V–0.
digit indicates the number window regulators, fuel/oil pumps, electric windshield wipers
•requirements
Approvals: AEC–Q200
C = 50 (in progress), ISO7637 of zeros to be added. • Tape and reel packaging in accordance with IEC 60286-2
electrically
operated
seats. This
through-hole EMI/RFI
• Rated voltage: 18D =– 63
63 VDC
• and
RoHS
Compliant
and lead-free
terminations
suppression
element
is
mainly
used
for
applications
• Capacitance range: 0.1 μF to 2.2 μF
• Operating temperature range: -55˚C to automotive
+125˚C
without a printed circuit board, e.g., motor suppression or mixed
Circuit Diagram
through-hole
surface mount printed circuit boards.
Polyester Film with Integrated Suppression Diode,
18 – 63andVDC
PartμFNumber
System
• Temperature
F5Bts
Benefi
•
H
C
4100
Rated Voltage Lead Spacing
Series
(VDC)
Low inductive MKT
capacitors in(mm)
parallel construction with
DQ
A
7
Lead and
Diode Breakdown
Size Code
Packaging
Code tolerance:
Voltage V±10%,
@ 1 mA
Capacitance
±20%
BR
K
Capacitance
Tolerance
•
a ceramic
capacitor
in a single case
superior
Film
B = 18
C = 5 provideDigits
2 – 4 indicate the • Climatic
See Ordering
See Diode IEC 60068–1
See Dimension
K = ±10%
One world. One
Capacitor/
H = 25
Options
Table
BreakdowninVoltage
Table
M = KEMET
±20%
suppression
results
• Tape
and
reel packaging
accordance with
IEC 60286–2
Diode Unit
= 30
capacitance
value. First
© KEMET
Electronics JCorporation
• P.O. Box 5928 • Greenville,
SC 29606
(864) 963-6300 • www.kemet.com Table
F3068_F5A • 4/16/2015
1
• Approvals:
AEC–Q200,
ISO
7637–2
•
RoHS
Compliant
and
lead-free
terminations
N = 45
digit indicates the number
100 VDC
• Operating temperature range: -55˚C to +125˚C
C =– 50
D = 63
• Capacitance range:
0.1 – 2.2 μF
Circuit Diagram
F5D Series Metallized Polyester Film with Integrated Ceramic Capacitor, 63 – 100 VDC
PartμFNumber
System
• Temperature
F5D
D
C
Series
Rated Voltage
(VDC)
Lead Spacing
(mm)
3100
DQ
W
Lead and
Packaging Code
Ceramic Capacitor
Value
Film
D = 63
C = 5 mm
See Ordering
See Ceramic
Capacitor/
E = 100
F= 10 mm
Options Table
Capacitor Table
Ceramic
capacitance value. First
Unit
digit indicates
the number
©Capacitor
KEMET Electronics
Corporation • P.O. Box 5928 • Greenville,
SC 29606
(864) 963-6300 • www.kemet.com
5
M
Size Code
Capacitance
Tolerance
See Dimension
Table
K = ±10%
M = ±20%
F3069_F5B • 4/16/2015
1
Circuit Diagram
90
F3022_F5D • 4/16/2015
1
•R75
Capacitance
tolerance:
±20%,
±10%
2/L
Series
DC and
Pulse
Applications
Spacing)
and meet
the demanding
Automotive
Electronics
•Council's
ClimaticAEC–Q200
IEC
60068-1
qualifi
requirements.
230
250cation
VAC
• TapeVAC
and reeland
in accordance
with IEC 60286-2
Film Capacitors
•Overview
Benefi
ts based on AEC-Q200 guidelines
• Qualification
Power & Application Optimized – Capacitive AC PowerApplications
Supply
Radial
• Class X2 (IEC 60384-14)
Rated voltage: 440 VAC310
50/60
Hz (Automotive Grade)
F862 Series, Metallized• Polypropylene,
VAC
•
Capacitance
range:
0.0047
–
2.2
µF
PartμFNumber
System
• Temperature
Range: −40°C
to +110°C
• Capacitance
tolerance:
F
862±20%, ±10% B
C
104
• Climatic category: 40/110/56, IECLead
60068–1
Spacing
Class
Series
• Capacitor
Tape and
reel in accordance
with IEC
60286–2 Size Code
(mm)
• RoHS
Compliant
and
lead-free
terminations
F = Film
X2, Metallized
B = 15
See Dimension First two digits represent
range of -40˚C
+110˚C Table
Polypropylene
D = to
22.5
27.5
• 100% screening factory test at 2,200F =VDC/1,500
VAC
of zeros.
22.5 mm Lead Spacing
M
Capacitance
Tolerance
310
C
Voltage (VAC)
Lead and
Packaging Code
K = ±10%
M = ±20%
310
See Ordering
Options Table
ts
R47 Series, Metallized Benefi
Polypropylene,
440 VAC (Automotive Grade)
to 2.2Number
μF • Temperature
R47
4
F
1470
00
01
Lead and
Series
Packaging Code
X2, Metallized
4 = 440
F = 10.0
See Ordering
Polypropylene
I = 15.0
Options Table
N = 22.5
capacitance value.
R = 27.5
W = 37.5
added.
M
Capacitance
Internal Use
Tolerance
F3092_F862_X2_310 • 4/16/2015
1
01
K = ±10%
02
M = ±20%
03
R75 2/L Series Metallized Polypropylene, 230 VAC/250 VAC
Number
System
10 μF
• Temperature
R75
Series
2/L
Rated Voltage
(VAC)
2 = 230
L = 250
R
Lead Spacing
(mm)
I = 15
N = 22.5
R = 27.5
W = 37.5
3680
Capacitance
Code (pF)
Two significant digits
+ number of zeros
DQ
Ordering Code
DQ
GY
CK
AA
40
50
3
Electrical
Characteristics
Dimensions
and electrical
characteristics
(0 – 9)
F3096_R47_X2_440 • 4/16/2015
–
Internal use
K
1
Capacitance
Tolerance
J = ±5%
K = ±10%
M = ±20%
• 4/16/2015
1
91
•• Rated
voltage:range:
300 VAC
Capacitance
0.01 50/60
– 0.22Hz
µF
•• Capacitance
range:
0.01
–
0.22 µF
Lead spacing: 15.2 – 25.4 mm
•• Lead
spacing:tolerance:
15.2 – 25.4
mmfor C ≤ 0.1 µF, ±10% for C > 0.1 µF
Capacitance
±20%
•• Capacitance
tolerance:
±20% for C
≤ 0.1
µF, ±10% for C > 0.1 µF
Climatic category:
40/110/56/B,
IEC
60068–1
•• Climatic
category:
40/110/56/B,
IEC
60068–1
•• Tape
reel packaging
in accordance
with IEC 60286–2
RoHSand
Compliant
and lead-free
terminations
•• RoHS
Compliant
and
lead-free
terminations
•• Operating
temperature
-40˚CVDC
to +110˚C
100% screening
factoryrange
test atof2,150
•• 100%
test at 2,150
VDCand passive
Radial (cont.)
Highestscreening
possible factory
safety regarding
active
ACHighest
Line EMI
EMI
Suppression
and RC
RCactive
Networks
•AC
possible
safety regarding
and passive
Line
Suppression
and
Networks
flammability
PME271E Series Metallized
Impregnated Paper, Class X1, 300 VAC
flammability
Film Capacitors
Power & Application Optimized – Capacitive AC Power Supply
PME271M Series Metallized Impregnated Paper,
Paper,
Legacy
Number
System
Class Part
X2, Number
275 VAC
VAC
Class
X2,
Legacy
LegacyPart
Part275
NumberSystem
System
SeriesRange:
Metallized
Impregnated
Capacitance Range: 0.01 toPME271M
−40°C to +110°C
PME271
PME271
E
E
Overview
Series
Overview
(D)
(D)
Rated Voltage (VAC)
Lead Spacing (mm)
Series
Rated Voltage (VAC)
Lead Spacing (mm)
X1,PME271M
Metallized Paper
E = 300 of multilayer
Blankmetallized
= Standard
The
Series is
is constructed
constructed
The
Series
metallized
X1,PME271M
Metallized Paper
E = 300 of multilayer
BlankD
== Standard
22.5
paper
encapsulated
and
impregnated
in
self-extinguishing
D = 22.5
paper encapsulated and impregnated in self-extinguishing
material meeting
meeting the
the requirements
requirements of
of UL
UL 94
94 V–0.
V–0.
material
Benefi
ts
Benefi
ts
KEMET
Part
New
KEMET
PartNumber
NumberSystem
System
510(0)
510(0)
M
M
R30
R30
Capacitance
Lead and
Applications
Capacitance
Code (pF)
Applications
Capacitance
Lead and
Tolerance
Packaging
Code
Tolerance
Packaging Code
Digits
2 – 4(3)applications
indicates the fiinclude
rst
Mworldwide
= ±20% (foruse
C ≤ in electromagnetic
See Ordering
Typical
Typical
Digits
2digits
– 4(3)
indicates
the fiinclude
rst
Mworldwide
= ±20%
(foruse
C ≤ in electromagnetic
See Ordering
three
ofapplications
the capacitance
0.1 µF)
Options
Table
interference
suppression
in all X2
and
across-the-line
three
digitsdigit
of the
capacitance
0.1and
µF)
Options Table
interference
suppression
value.
First
indicates
the total in Kall= X2
±10%
(foracross-the-line
C>
applications.
value.applications.
First
digit in
indicates
the total
K = ±10%
(for C >
number
of digits
the capacitance
0.1 µF)
number of digits
in the capacitance
0.1 µF)
value.
value.
••
••
••
••
••
Approvals: ENEC,
ENEC, UL,
UL, cUL
Approvals:
P voltage: 275
277VACcUL
Q
E
103
M
300
A
Rated
50/60 Hz
HzQ
P
277
E
103
M
300
A
Rated voltage: 275 VAC 50/60
Capacitance
Rated
Voltage
Lead
and
Capacitor
Capacitance range:
range:
0.001 Lead
0.6Spacing
µF (mm)
Series0.001
Size Code
Capacitance
-- 0.6
µF
Capacitor
Capacitance
Rated
Voltage
Lead and
Tolerance
(VAC)
Packaging
Code
Class
Series– 25.4 Lead
Spacing (mm)
Size Code
Lead
spacing:
10.2
mm
Classspacing: 10.2 – 25.4 mm
Tolerance
(VAC)
Packaging Code
Lead
P
=
Paper
X1,
Metallized
Q
=
15.2
See
Dimension
First
two
digits
indicate
the
M
=
±20%
(for
C
300
=
300
See
Ordering
CapacitanceX1,tolerance:
tolerance:
M == ±20%
±20%
(for C
C≤
≤ 0.1
0.1
µF),
K == ±10%
±10%First two digits indicate the M = ±20% (for C
Capacitance
M
(for
µF),
K
P = Paper
Metallized
Q
See
Dimension
300 = 300
See Ordering
Paper
C = 15.2
20.3
Table
≤ 0.1 µF)
Options
Table
(for
C
>
0.1
µF)
Paper
C
=
20.3
Table
two
significantvalue
digitsin K = ±10%
≤ 0.1 µF)
Options Table
S 22.5
of
themost
capacitance
(for C >
(for C > 0.1 µF)
SE = 22.5
ofpicofarads.
the capacitance
value
(for C >
25.4
The third
digitin K = ±10%
0.1 µF)
Climatic category:
40/110/56, IEC
IEC
60068–1
•• Climatic
60068–1
E = 25.4
picofarads.
Theofthird
digit
0.1 µF)
is
the
number
following
Tape and
and reel
reel in
in accordance
accordance with
with IEC
IEC 60286–2
60286–2
•• Tape
is the number
of following
zeros.
RoHS Compliant
Compliant and
and lead-free
terminations
zeros.
•• RoHS
temperature range
range of
of -40˚C
-40˚C to
to +110˚C
+110˚C
•• Operating
One world.• One
KEMET 1
••© KEMET
100%
screening
factory
test
at
2,150
VDC
Electronics
Corporation
•
P.O.
Box
5928
•
Greenville,
SC
29606
(864)
963-6300
•
www.kemet.com
F3014_PME271E_X1_300
4/16/2015
PME271M Series Metallized
Class
X2, 275
VAC
© KEMET Impregnated
Electronics CorporationPaper,
• P.O. Box 5928
• Greenville,
SC 29606
(864) 963-6300 • www.kemet.com
F3014_PME271E_X1_300 • 4/16/2015
Legacy Part
Part
Number
System
Legacy
Legacy
PartNumber
NumberSystem
System
PME271
PME271
M
M
(B)
(B)
610(0)
610(0)
Series
Series
Rated Voltage
Voltage (VAC)
(VAC)
Rated
Lead Spacing
Spacing (mm)
(mm)
Lead
Capacitance Code
Code (pF)
(pF)
Capacitance
X2, Metallized
Metallized Paper
Paper
X2,
M == 275
275
M
Blank == Standard
Standard
Blank
A == 10.2
10.2
A
B == 15.2
15.2
B
D == 22.5
22.5
D
M
M
P
P
P == Paper
Paper
P
Digits 22 –– 4(3)
4(3) indicates
indicates the
the fifirst
rst
Digits
three digits
digits of
of the
the capacitance
capacitance
three
value. First
First digit
digit indicates
indicates the
the
value.
total number
number of
of digits
digits in
in the
the
total
capacitance value.
value.
capacitance
276
276
Q
Q
E
E
104
104
M == ±20%
±20%
M
(for C
C≤
≤ 0.1
0.1 µF)
µF)
(for
K == ±10%
±10%
K
(for C
C >> 0.1
0.1 µF)
µF)
(for
Series
Series
Lead Spacing
Spacing (mm)
(mm)
Lead
Size Code
Code
Size
Capacitance Code
Code (pF)
(pF)
Capacitance
See Dimension
Dimension
See
Table
Table
First two
two digits
digits indicate
indicate the
the
First
two most
most signifi
significant
cant digits
digits
two
of the
the capacitance
capacitance value
value in
in
of
picofarads. The
The third
third digit
digit
picofarads.
is the
the number
number of
of following
following
is
zeros.
zeros.
X2, Metallized
Metallized
X2,
Paper
Paper
H == 10.2
10.2
H
Q == 15.2
15.2
Q
C == 20.3
20.3
C
S == 22.5
22.5
S
E == 25.4
25.4
E
M
M
Capacitance
Capacitance
Tolerance
Tolerance
M == ±20%
±20%
M
(for C
C≤
≤ 0.1
0.1 µF)
µF)
(for
K == ±10%
±10%
K
(for C
C >> 0.1
0.1 µF)
µF)
(for
© KEMET
KEMET Electronics
P.O. Box
Box 5928
Greenville, SC
SC 29606
29606 (864)
(864) 963-6300
www.kemet.com
©
92
R30
R30
Capacitance
Capacitance
Tolerance
Tolerance
Lead and
and
Lead
Packaging Code
Code
Packaging
See Ordering
Ordering
See
Options Table
Table
Options
New KEMET
KEMET
Part
Number
System
New
New
KEMETPart
PartNumber
NumberSystem
System
Capacitor
Capacitor
Class
Class
1
275
275
Rated Voltage
Voltage
Rated
(VAC)
(VAC)
275 == 275
275
275
A
A
Lead and
and
Lead
Packaging Code
Code
Packaging
See Ordering
Ordering
See
Options Table
Table
Options
One world.
world. One
One KEMET
KEMET
One
F3011_PME271M_X2_275 •• 4/16/2015
4/16/2015
F3011_PME271M_X2_275
11
Supercapacitors
SUPERCAPACITORS
Small Cell
Radial
Surface Mount
Snap-In
Screw Terminal
Bank Module
FA
5.5 V & 11 V
70°C
FC
3.5 V – 5.5 V
70°C
S501
2.7 V
65°C
S301
2.7 V
65°C
S02
16 V – 48 V
65°C
FE
5.5 V
70°C
FG
3.5 V & 5.5 V
70°C & 85°C
FM
3.5 V, 5.5 V & 6.5 V
70°C & 85°C
FR
5.5 V
85°C
FS
5.5 V, 11 V & 12 V
70°C
FT
5.5 V
85°C
FY
5.5 V
70°C
HV
2.5 V & 2.7 V
60°C & 70°C
94
Large Cell
S301 Development
Balancing Kit
flash memory.
• Highly reliable against liquid leakage
• Lead-free and RoHS Compliant
FG Series
Supercapacitors
Overview
Applications
Small Cell
FG Series Supercapacitors, also known as Electric DoubleSupercapacitors have characteristics ranging from traditional
Layer
Capacitors
(EDLCs), are intended for high energy storage
capacitors and batteries. As a result, supercapacitors can be
Benefi
ts
applications.
used like a secondary battery when applied in a DC circuit.
Radial
• Wide range of temperature from -40°C to +70°C
These devices are best suited for use in low voltage DC hold-up
Maintenance free
applications such as embedded microprocessor systems with
FA Series, 5.5 V – 11 V,• Supercapacitors
70ºC
System
•toMaximum
operating
voltage:
5.5 −25°C
VDC to +70°C
flash memory.
1 FNumber
• Temperature
Range:
0H
104
Z
F
• Lead-free FA
and RoHS Compliant
FM Series
Series
Overview
FA
FE Series, 5.5 V, 70ºC
Capacitance Code (F)
Capacitance
Tolerance
Environmental
Z = -20/+80%
F = Lead-free
104
Z
F
Maximum Operating Voltage
0H = 5.5 VDC
Applications
= 11.0
VDCas Electric Doublesignificant figures.Supercapacitors
Third digit
FM Series Supercapacitors, 1A
also
known
have characteristics ranging from traditional
specifies number of zeros.
Layer Capacitors (EDLCs), are intended for high energy storage
Benefits
applications.
• Wide range of temperature from -25°C to +70°C (FG & FGH
types) and -40°C to +85°C (FGR type)
flash memory.
• Maintenance free
to 1.5Number
F • Temperature
Supercapacitors
• 3.5 VDC and 5.5 VDC
FR Series
• Highly reliable
FE against liquid leakage 0H
Capacitance
Series
Tolerance
0H = 5.5 VDC
First two digits Applications
represent
Z = -20/+80%
OverviewFE
figures.
Third•digit
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC signifi
29606cant
(864)
963-6300
www.kemet.com
Benefits
Environmental
One world.
One KEMET
F = Lead-free
S6018_FA • 4/16/2015
1
FR Series Supercapacitors, also known as Electric DoubleSupercapacitors have characteristics ranging from traditional
Layer Capacitors (EDLCs), are intended for high energy storage
•applications.
Rectangular case
• Wide range of temperature from -25°C to +70°C (all types
FG Series, 3.5 V – 5.5 V,except
70ºCFMR)
& 85ºC
and -40°C to +85°C (FMR type)
System
FNumber
• Temperature
Range: −25°C to +70°C (FG, FGH) and
−40°C
to +85°C (FGR)
• 4.7
Maintenance
free
flash
memory.
• 3.5 VDC, 5.5 VDC, and 6.5 VDC
FG
0H
104
Z
F
Capacitance
Environmental
• Lead-freeSeries
and RoHS Compliant
Tolerance
• Leads canFG
be transverse mounted
0V = 3.5 VDC
Z = -20/+80%
F = Lead-free
FGH
0H = 5.5 VDC
significant figures. Third digit
963-6300
• www.kemet.com
FGR Corporation • P.O. Box 5928 • Greenville, SC 29606
specifi(864)
es number
of zeros.
S6019_FE • 4/16/2015
1
Benefits
• Wide
range
of temperature from -40°C to +85°C
FM Series, 3.5 V – 6.5 V,
70ºC
& 85ºC
Number
SystemRange: −25°C to +70°C (all types except FMR) and −40°C to +85°C (FMR)
Maintenance
free
Capacitance Range: 0.01 to•Part
0.22
F • Temperature
• Maximum operating voltage: 5.5 VDC
0H leakage
• HighlyFM
reliable against liquid
Maximum
Series
Operating Voltage
223
Z
Capacitance
Tolerance
F
Environmental
FM
0V = 3.5 VDC
First two digits
Z = -20/+80%
F = Lead-free
FME
0H = 5.5 VDC
represent significant
© KEMETFML
• P.O. Box 5928figures.
• Greenville,
SC 29606 (864) 963-6300 • www.kemet.com
0J = 6.5 VDC
Third digit
FMR
specifies number of
FMC
zeros.
TP
16
Tape Type
Height
(excluding lead)
TP = AMMO
16 = 16 mm
One world.
One KEMET
-L1 = Transverse
18 = 18 mm
S6013_FG
•
1
mounting
Blank =4/16/2015
Bulk
Blank = Bulk
FR Series, 5.5 V, 85ºC
System
to 1 FNumber
• Temperature
FR
0H
104
Z
Capacitance
Series
Tolerance
Corporation • P.O. Box
Greenville, SC 29606
(864)
963-6300
• www.kemet.com
FR
0H 5928
= 5.5 •VDC
First two
digits
represent
Z = -20/+80%
F
Environmental
One world.
One KEMET
S6012_FM
• 4/16/2015
F = Lead-free
1
95
• Highly
reliable against liquid leakage
FY
Series
Overview
Applications
Supercapacitors
Small Cell
FY Series Supercapacitors, also known as Electric DoubleSupercapacitors have characteristics ranging from traditional
Layer
Capacitors
(EDLCs),
are
intended
for
high
energy
storage
Benefits
applications.
Radial (cont.)
FS Series, 5.5 V – 12 V,•Supercapacitors
70ºC
Maximum operating voltage: 5.5 VDC
flash memory.
System
5 FNumber
• Temperature
Range:
−25°C to +70°C
•toHighly
reliable against liquid
leakage
FS
0H
104
Z
F
HV Series
Series
Overview
Capacitance
Tolerance
Environmental
Z = -20/+80%
F = Lead-free
Capacitance
Tolerance
Environmental
0H = 5.5 VDC
Z = -20/+80%
FS
0H = 5.5 VDC
Capacitance Code
(F)
Applications
HV Series Supercapacitors, 1A
also
known as Electric DoubleSupercapacitors have characteristics ranging from traditional
= 11.0 VDC
Layer
Capacitors
(EDLCs),
are
intended
for
high
energy
storage
capacitors
1B
=
12.0
VDC
specifi
es
number
of zeros. and batteries. As a result, supercapacitors can be
Benefits
applications.
FT Series, 5.5 V, 85ºC • Maximum operating voltage: 5.5 VDC
flash memory.
System
5.6 F Number
• Temperature
Supercapacitors
• Lead-free FT
and RoHS Compliant
0H
104
Z
F
FC Series
Series
FT
F = Lead-free
One world.
One KEMET
FTW
significant figures.Applications
Third digit
Overview
©
KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606
963-6300
• www.kemet.com
specifi(864)
es number
of zeros.
Benefits
S6017_FS • 4/16/2015
1
FC Series Supercapacitors, also known as Electric DoubleSupercapacitors have characteristics ranging from traditional
• Wide
range of temperature
-25°C
to +60°C
Layer
Capacitors
(EDLCs), arefrom
surface
mount
type components
and -25°C
to +70°C
intended
for high
energy storage applications. The FC Series is
FY Series, 5.5 V, 70ºC • Maintenance free
designed
specifically
for reflow soldering, allowing them to be
Part
Number
System
Capacitance Range: 0.01 to• 2.2
• Temperature
2.5 FVDC
2.7 VDC
attached
to and
a printed
circuit board (PCB) directly.
• Highly reliable
against
liquid
leakage
FY
0H
104 flash memory.
Z
F
Series
Capacitance
Tolerance
Environmental
F = Lead-free
One world.
One KEMET
FYD
0H = 5.5 VDC
Z = -20/+80%
FYH Corporation • P.O. Box 5928 • Greenville, SC signifi
figures.
Third•digit
29606cant
(864)
963-6300
www.kemet.com
FYL
S6014_FT • 4/16/2015
1
Benefits
HV Series, 2.5 V – 2.7 V, 60ºC & 70ºC
Part
System
F • Number
Temperature
Range: −25°C to +60°C and −25°C to +70°C
•
•
•
•
•
•
Surface mount without holder
Wide range of temperature from -25°C to +70°C
Maintenance
HVZ free
0E
105
Operational Voltage: 3.5Maximum
– 5.5 VDC
Operating
Highly Series
reliable against liquid leakage
Voltage
Lead-free
and
RoHS
Compliant
HVZ
0E = 2.7 VDC
N
F
-LT
Capacitance
Tolerance
Environmental
Terminal
N = ±30%
(50 F •type
VDC)
significant
gures. (864)
Third 963-6300 • www.kemet.com
P.O.has
Box2.5
5928
• Greenville,
SCfi29606
digit specifies number of
zeros.
F = Lead-free
-LT One
= Snap-in
One world.
KEMET
Blank• 4/16/2015
= Standard
S6015_FY
1
Surface Mount
FC Series, 3.5 V – 5.5 V, 70ºC
Number System
1 F • Temperature
FC
0H
104
Z
F
TB
Series
Maximum
Capacitance
Capacitance
Code (F)SC 29606 (864) 963-6300
Environmental
Tape Type
© KEMET
Corporation
• P.O. Box
• www.kemet.com
SurfaceElectronics
Mount
Operating
Voltage
Tolerance
FCS
FC
96
0V = 3.5 VDC
0H = 5.5 VDC
First two digits
figures. Third digit
zeros.
Z = -20/+80% F = Lead-free
R
Orientation
24
-SS
Tape Width
C-Spec
S6020_HV • 4/16/2015
TB =
R = Positive 24 = 24 mm
Embossed electrode 32 = 32 mm
forward
44 = 44 mm
-SS = 3 digit serial
number marked
on top
Blank = No serial
number marking
1
in
a weldable
axial screw termination cell.
• High
rate cycling
• Long life
• High cycle life > 500,000 cycles
• RoHS Compliant
• Made in USA
grid/power correction, and UPS/carry through power.
Supercapacitors
Large Cell
Snap-In
Benefits
S501 Series, 2.7 V, 65ºC
Weldable
screwSystem
terminals
Capacitance Range: 100 to •Part
350
FNumber
• Temperature
• Highest power performance available
• HighS501
power
DC
107
• High rate cycling
Series
Size Code (D x L)
• Long life
•Bank
Operating
+65˚C
Supercapacitor,
DC = 22range
x 45 of -40˚C
Firsttotwo
digits represent significant figures.
Moduletemperature
Supercapacitors
LF = 35 x 60cycles
Third digit specifies number of zeros.
• HighSnap-In
cycle life > 1,000,000
Termination
= 35 x 69
• RoHS
Compliant LI
LR = 35 x 89
• Made in USA
V
2R7
A
Capacitance
Tolerance
Rated Voltage
(VDC)
Termination Code
V = -5/+10%
W = -0/+20%
2R7 = 2.7
A = 2 pin, 10 mm lead spacing,
5.9 mm terminal length
U = 4 pin standard snap-in style
S02 Series, Modules with Cells in Extruded Metal Holder
Screw Terminal
Overview
Applications
KEMET S02 Series Supercapacitors are bank modules with cells
in extruded metal holder.
Renewable energy systems
Starting systems
Part
Number
System
Automotive subsystems
Capacitance Range: 1,200 to 3,000 F • Temperature Range: −40°C to +65°C
Backup power/UPS
Ride through/power
conditioning
S301
RV
308
T
2R7
Hybrid
drive
systems
Capacitance
Rated
Voltage
S301 Series, 2.7 V, 65ºC
Series
Size Code (D x L)
Supercapacitor,
Screw Termination
RP = 60.5 x 80.5
RS = 60.5 x 108.5
RV = 60.5 x 144
First two digits represent significant figures.
Third digit specifies number of zeros.
Tolerance
(VDC)
R = -0%
2R7 = 2.7
W
S6003_S501
• 4/16/2015
Termination
Code
1
2 threaded inserts per end,
20 mm lead spacing, M6
Benefits
S301 Development Balancing
• 16 – 48.6Kit
V rated voltage
3,000 F • Temperature
• Individually
balanced cells Range: −40°C to +105°C
• IP–65 rated, (IP–67 optional)
S0K
MOD
• Threaded, protected terminals
Series range of -40˚C to +65˚C
Configuration
• Optional state of charge indicator
Supercapacitor
Kit • Greenville, SC 29606 (864)
Module
© KEMET
ElectronicsDevelopment
Corporation •Balancing
P.O. Box 5928
• Cycle life > 500,000 cycles
• RoHS Compliant
• Made in USA
0001
Model
Additional Hardware
Required:
S6001_S301
• 4/16/2015
Six (6) KEMET S301 Screw Terminal
Supercapacitors,
60 mm cell diameter only
1
Bank Module
S02 Series, Modules with Cells in Extruded Metal Holder, 16 V – 48 V, 65ºC
System
Capacitance Range: 165 to Part
500 FNumber
• Temperature
S02
Series
Supercapacitor,
Bank Modules
with cells in
extruded metal
holder
A
T
5006
Configuration Configuration Code Capacitance Code
Code Balancing
Capacitor Type
(µF)
A = Analog with
clamping
T =Array, 2
dimensions
D = Array, 3
dimensions
First three digits
figures. Fourth digit
zeros.
R
016
Tolerance
(VDC)
R = -0%
016 = 16 V
048 = 48 V
A
U808
Termination Code
C-Spec
A = The first mechanical
configuration of a
particular part number
B = Refers only
to part number
S02AT1656R048BU808
Blank = No monitor
U808 = Digital
Overvoltage
and analog over
temperature
monitor
S6009_S02 • 4/16/2015
1
97
Tantalum Capacitors
TANTALUM SURFACE MOUNT CAPACITORS
Polymer Tantalum
Standard Tantalum KEMET Organic
Capacitor
(KO-CAP)
Polymer Aluminum
Organic Capacitor
(AO-CAP)
High Temperature
A700
125°C Rated
T498
150°C Rated MnO2
High Reliability
Commercial
Off-The-Shelf
(COTS)
MIL-PRF CWR
Series
Fused
Automotive Grade
Space Grade
T428
High Volumetric
Efficiency Facedown
MnO2
T409
(CWR09)
MIL-PRF-55365/4
T496
MnO2
T489
Low DC Leakage
MnO2
T493
COTS MnO2 (CWR11)
T489
Low DC Leakage MnO2
T520
105°C Rated
T490
High CV MnO2
T521
High Voltage
T499
175°C Rated MnO2
T493
MnO2 (CWR11)
T419
(CWR19)
MIL-PRF-55365/11
T491
MnO2
T496
COTS Fail-Safe
Fused MnO2
T491
Industrial Grade MnO2
T522
Reduced Leakage
T500
200°C Rated MnO2
T495
Surge Robust MnO2
DLA 95158
T429
(CWR29)
MIL-PRF-55365/11
T494
Low ESR MnO2
T497
COTS MnO2
(CWR09/19/29)
T494
Industrial Grade Low
ESR MnO2
T525
125°C Rated
T497
MnO2 (CWR09/19/29)
T492
(CWR11)
MIL-PRF-55365/8
T495
Surge Robust MnO2
T510
Multiple Anode MnO2
T495
Surge Robust MnO2
T527
Facedown Terminal
T496
Fused MnO2
T498
150°C Rated MnO2
T510
Multiple Anode MnO2
T528
Low ESL/Facedown
Terminal
T513
Multiple Anode MnO2
T499
175°C Rated MnO2
TSM
Tantalum Stack MnO2
T529
Small Case Size
Substrate Terminal
T540
Single Anode Polymer
T510
Multiple Anode MnO2
T530
High Capacitance
125°C Rated
T541
Multiple Anode
Polymer
T591
High Performance
Polymer
T545
High Energy
T543
Polymer
TSP
Tantalum Stack
Polymer
TANTALUM THROUGH-HOLE CAPACITORS
Hermetically Sealed Axial
98
Radial Dipped
Molded Axial
Molded Radial
T322/T323
(CX01/CX05)
MIL-PRF-49137/1 & 5
T330
Precision Molded
Polar
T110
MIL-PRF-39003 Polar
& T212 (CSR13)
T225
High Temperature
Solder (CSR09)
T35X
Polar
T111
MIL-PRF-39003
Non-Polar &
T213 (CSR91)
T245
High Temperature
Solder (CSR23)
T363 (CX02) &
T369 (CX12)
MIL-PRF-49137/2
T340
Precision Molded
Polar
T140
MIL-PRF-39003 Polar
& T242 (CSR23)
T252
MIL-PRF-39003
(CSR33)
T368
High Capacitance
T370 & T378
(CX06)
MIL-PRF-49137/6
T210/T240/GR500
High Reliability
T255
High Temperature
Solder (CSR33)
T396 & T398
3 Leaded
T215
High Temperature
Solder (CSR13)
T262
MIL-PRF-30093
(CSR21)
T216
MIL-PRF-39003
(CSS13) & T256 (CSS33)
T550
Polymer 105°C Rated
T222
MIL-PRF-39003 Polar
Miniature (CSR09)
T551
Polymer 125°C Rated
Tantalum Surface Mount Capacitors – Standard Tantalum
T489 Series Low DC Leakage MnO2
Tantalum Capacitors
SPICE
Surface Mount
For a detailed analysis of specific part numbers, please visit www.kemet.com for a free download of KEMET's SPICE software. The
KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over frequency, temperature, ripple, and DC bias conditions.
Standard Tantalum
T489 Series Low DC Leakage MnO2
Ordering
Information
µF • Temperature
T
489
B
156
M
Capacitor
Capacitance
Series
Case Size – Standard Tantalum
Tantalum Surface
Mount Capacitors
Class
Code (pF)
T490 Series Commercial Grade MnO2
T=
Low DC
A, B, C, First two digits represent
Tantalum Leakage
D, X
SPICE Series
zeros.
Capacitance
Tolerance
16
A
Rated Voltage Failure Rate/
(VDC)
Design
T
E800
Termination Finish
ESR
K = ±10%
M = ±20%
006 = 6.3
A = N/A
T = 100% Matte Tin
Last three digits
010 = 10
(Sn) Plated
specify ESR in mΩ.
016 = 16
H = Standard Solder
(800 = 800 mΩ)
020 = 20
Coated (SnPb 5% Pb
025 = 25
minimum)
For a detailed analysis of specific part numbers, please visit www.kemet.com
for a free downloadGof
KEMET's SPICE software.
035 = 35
= Gold Plated
The KEMET SPICE program is freeware intended to aid design engineers
050 =in
50analyzing the performance of these capacitors over
T490 Series Commercial Grade High CV MnO2
Performance
Characteristics
Ordering
Information
µF • Temperature
T
490
Item
B
227
M
006
A
T
-55°C to 125°C
Capacitor
Capacitance
Capacitance Rated Voltage Failure Rate/
Series Capacitors
Case Size – Standard Tantalum
Tantalum
Class Surface Mount Rated
Code
(pF)
(VDC)
Design
Capacitance Range
0.10 µF to Tolerance
470 µF at 120 Hz/25°C
T491 Series Industrial Grade MnO2
T=
Industrial
A,Capacitance
B, T
First two digitsK Tolerance
M (±10%),
= ±20% M Tolerance
004 = 4 (±20%) A = N/A
Tolerance
Tantalum
006 = 6.3
Rated Voltage
Range
6.3 – 50 V
figures.
Third digit
010 = 10
SPICE
specifies number of
DF(120zeros.
Hz)
Refer to Part Number Electrical Specification
Termination Finish
Packaging (C-Spec)
T = 100% Matte Tin (Sn) Blank = 7" Reel
plated
7280 = 13" Reel
H = Standard solder
coated (SnPb 5% Pb
minimum)
For a detailed analysis of specific part numbers, please visit www.kemet.com for a free download
KEMET's
SPICE
software.
G =ofGold
plated (A,
B
ESR (100 kHz)
The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance
of these capacitors over
only)
Leakage
Current
≤ 0.0075 CV (µA) at rated voltage after 5 minutes
frequency, temperature, ripple,
and DC
bias conditions.
Reliability
0.50%/1,000 hours at 85°C, VR with 0.1 Ω series resistance
Performance
Characteristics
Ordering
Information
μF • Temperature
T
491 Item
X
157
K
Performance
020
A CharacteristicsT
-55°C to 40°C
Capacitor
Capacitance
Series
Case Size
Class
Code (pF)
Tolerance
(VDC)
Design
Rated Capacitance Range
47 – 470 µF at 120 Hz/25°C
T=
Industrial
A, B, C, D,
First two digits
K = ±10%
2R5 = 2.5
A = N/A
Capacitance
Tantalum
E, S, T, U, Tolerance
representM Tolerance
M = (20%)
±20%
003 = 3
V, W,Voltage
X
significant
004 = 4
Rated
Range
4 – 10 V
006 = 6.3
ESR (100
kHz)es number
Refer to Part Number Electrical
Specification Table
specifi
010 = 10
of zeros.
016 = 16
Leakage Current
≤ 0.01 CV (μA) at rated voltage
after
020 = 20 5 minutes
025 = 25
035 = 35
050 = 50
Termination Finish
Packaging (C-Spec)
T = 100% Matte Tin (Sn) Blank = 7" Reel
plated
7280 = 13" Reel
H = Standard solder
coated (SnPb 5% Pb
minimum)
G = Gold plated (A, B, C,
D, X only)
N = Non-magnetic 100%
T2024_T489 • 4/16/2015
2
Tin (Sn)
M = Non-magnetic (SnPb)
Item
Rated Voltage Range
-55°C to 125°C
0.1 – 1,000 µF at 120 Hz/25°C
K Tolerance (10%), M Tolerance (20%)
2.5 – 50 V
DF (120 Hz)
Refer to Part Number Electrical Specification Table
ESR (100 kHz)
Leakage Current
T2004_T490 • 4/16/2015
2
99
Tantalum Surface Mount Capacitors – Low ESR
Tantalum Capacitors
SPICE
Surface Mount
Standard Tantalum (cont.)
T494 Series Industrial Grade Low ESR MnO2
Ordering
μF • Temperature
T
494
Capacitor
Class
Series
T
336
Case Size
Capacitance
Code (pF)
M
004
A
Tolerance
(VDC)
Design
T
Termination Finish
Packaging
(C-Spec)
Blank = 7" Reel
2R5 = 2.5
A = N/A
T = 100% Matte Tin (Sn)
003 = 3
plated
7280 = 13" Reel
004 = 4
H = Standard solder
006 = 6.3
coated (SnPb 5% Pb
010 = 10
minimum)
SPICE
016 = 16
G = Gold plated (A, B, C,
020 = 20
D, X only)
Non-magnetic
100%software.
025 = 25
for a free download Nof=KEMET's
SPICE
Tin (Sn)
035 = 35
in analyzing the performance
050 = 50
M = Non-magnetic (SnPb)
T=
Industrial A, B, C, D,
First two digits
Tantalum Surface Mount Capacitors – Low ESR
Tantalum
Low ESR
E, S, T, U,
T495 Series Surge Robust MnO2 V, X
specifies number of
zeros.
K = ±10%
M = ±20%
T495 Series Surge Robust MnO2
Capacitance Range: 0.47 toOrdering
1,000 μF •Information
Temperature
Performance
Characteristics
T
495
Item
X
107
M
010
Performance
Characteristics
A
T
E045
-55°C
to 125°C Rated Voltage Failure Rate/
Capacitor
Case
Capacitance
Capacitance
Packaging
Series
Termination Finish
ESR
Class
Size
Code (pF)
Tolerance
(VDC)
Design
(C-Spec)
Capacitance
Range
0.1 – 1,000 µF at 120 Hz/25°C
Tantalum Surface Mount Rated
Capacitors
– Low ESR
T=
Surge
A, B,
First two digits
K = ±10%
2R5 = 2.5
A = N/A
T = 100% Matte Tin
Last three
Blank = 7"
T510
Series Multiple
Capacitance
Tolerance
M Tolerance
(20%)
Tantalum
RobustAnodeC,MnO
D, 2 represent
significant K Tolerance
M = ±20%(10%),004
=4
(Sn) plated
digits specify
Reel
Low ESR E, M,
006 = 6.3
H = Standard solder
ESR in mΩ.
7280 = 13"
Rated Voltage Range
2.5 – 50 V
T, U,
specifies number of
010 = 10
coated (SnPb 5% Pb (45 = 45 mΩ)
Reel
SPICE
V, X
016 =Electrical
16
minimum)
DF zeros.
(120 Hz)
Refer to Part Number
Specification Table
G = Gold plated (A, B,
020 = 20
ESR (100 kHz)
to Part Number
Specification Table
025 =Electrical
25
C, D, X only)of KEMET's SPICE software.
For a detailed analysis of specifi
c part numbers,Refer
please
visit www.kemet.com
for a free download
035 = 35
Current
≤ 0.01
CV (µA)
at rated
voltage after
5 minutes the performance of these capacitors over
The KEMET SPICE program Leakage
is freeware
intended
to aid
design
engineers
in analyzing
050 = 50
T510 Series Multiple Anode MnO2
Performance
Characteristics
Ordering
Information
μF • Temperature
T
510 Item X
477
M
006
Performance
Characteristics
A
T
-55°C to 125°C
Capacitor
Capacitance
Capacitance
Failure Rate/
Series
Case Size
Voltage
Lead Material
Class
Code
(pF)
Design
0.47 –Tolerance
1,000 µF at 120 Hz/25°C
T=
Multiple
E, X
First two digits
K = ±10%
004 = 4 V
A = N/A
T = 100% Matte Tin
Tantalum
Anode
represent significant M = ±20%
006 = 6.3 V Z = N/A
(Sn) Plated
Low ESR
figures.
Third digit
010 = 10 V
H = Standard Solder
Rated Voltage
Range
2.5 – 50 V
© KEMET Electronics Corporation • P.O.specifi
Box 5928
• Greenville,
SC 29606 (864)
es number
of
016963-6300
= 16 V • www.kemet.com
Coated (SnPb 5%
DF (120zeros.
Hz)
Refer to Part Number020
Electrical
= 20 V Specification TablePb minimum)
025 = 25 V
G = Gold Plated (A,
ESR (100 kHz)
035 = 35 V
B, C, D, X only)
050voltage
= 50 V after 5 minutes
Leakage Current
≤ 0.01 CV (µA) at rated
E800
ESR
Packaging
(C-Spec)
Last three
Blank = 7" Reel
digits specify 7280 = 13" Reel
ESR in mΩ.
T2008_T494
• 4/16/2015
2
(800
= 800
mΩ)
Item
Rated Voltage Range
100
-55°C to 125°C
10 – 1,000 µF @ 120 Hz/25°C
4 – 50 V
DF (120 Hz)
ESR (100 kHz)
Leakage Current
T2009_T495 • 4/16/2015
2
Tantalum Stack MnO2 (TSM) Series
SPICE
Tantalum Capacitors
Surface Mount
Standard Tantalum (cont.)
Tantalum Stack MnO2 (TSM) Series
Ordering
μF • Temperature
T
SM
2D
Capacitor
Class
Series
Case
Size
447
K
Code (pF)
Tolerance
2C, 3C, First two digits
Stacks
4C, 6C,
represent
MnO2
Cathode 2D, 3D,
significant
KEMET Organic Capacitor4D,
(KO-CAP)
– Low Third
ESR
6D, figures.
2X, 3X, digit specifies
T520 Series Polymer Tantalum
4X, 6X
number of
zeros.
A
H
61
20
D493
Voltage
Failure Rate/
Design
Lead Material
Surge
ESR
C-Spec 2
006 = 6.3 V
010 = 10 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
A = N/A
B=
0.1%/1,000
hours
C=
0.01%/1,000
hours
61 = None
10 = ESRDesignates
discrete
62 = 10 Cycles Standard
25°C After
20 = ESR-Low component
series.
Weibull
30 = ESRD493 =
63 = 10 cycles, Ultra-low
-55°C and 85°C
T493
After Weibull
SPICE
64 = 10 cycles,
-55°C and 85°C
Weibull SPICE software.
For a detailed analysis of specific part numbers, please visit www.kemet.com for a free downloadBefore
of KEMET's
T=
Tantalum
K = ±10%
M = ±20%
10
H = Standard
Solder Coated
(SnPb 5% Pb
minimum)
C = Hot Solder
Dipped
B = Gold
Plated
T = 100% Tin
The KEMET
SPICE
freeware
intended to aid design engineers in analyzing the performance of these capacitors over
Note:
These TSM
Stacksprogram
are specifiis
c to
T493 COTS.
Polymer Tantalum KEMET Organic Capacitor (KO-CAP)
T520 Series Polymer Tantalum
Ordering
μF • Temperature
Item
KEMET Organic Capacitor (KO-CAP) – Low ESR
V
157
Operating
Temperature
T521 T
Series High520
Voltage Polymer
Tantalum
Mto 125°C
-55°C
006
A
T
E045
Capacitor
Class
Case
Capacitance
Capacitance
Packaging
9.4 – 2,000 μFRated
@ 120Voltage
Hz/25°CFailure Rate/
Series Rated Capacitance Range
Termination Finish
ESR Code
Size
Code (pF)
Tolerance
(VDC)
Design
(C-Spec)
Environmental Compliance
E = ESR
Blank = 7"
T=
520 =
A, B,
First two digits
M = ±20% 2R5 = 2.5
A = N/A
T = 100% Matte Tin
Tantalum Polymer
C, D,
represent
003 = 3
(Sn) plated
Last three digits Reel
Rated Voltage
Range
6 – 50 V
RoHS Compliant (6/6) H,
according
to
Directive
2002/95/EC
when
ordered
with
100%
Sn
solder.
H = Tin/Lead (SnPb)
specify ESR in
7280 = 13"
L,
significant
004 = 4
DF (120
Electrical Specification solder
Table coated (5% Pb
mΩ. (045 = 45
Reel
M, Q, figures.
ThirdHz)
digit Refer to Part Number
006 = 6.3
mΩ)
T, U,
specifies number
008 = 8
minimum)
ESR (100 kHz)
P = Ni-Pd-Au plated
V, W,
of zeros.
010 = 10
N = Non-magnetic
X, Y Leakage Current
= 11 voltage after 5 minutes
≤ 0.01 CV (µA)011
at rated
SPICE
100% Tin (Sn)
12R = 12.5
016 = 16
M = Non-magnetic
For a detailed analysis of specific part numbers, please visit 020
www.kemet.com
for a free
download of KEMET's SPICE software.
= 20
(SnPb)
025 =engineers
25
The KEMET SPICE program is freeware intended to aid design
in analyzing the performance of these capacitors over
T521 Series High Voltage
Polymer Tantalum
Performance
Characteristics
Ordering
Information
μF • Temperature
Range: −55°C to +105°C and −55°C to +125°C
T
521
Item
V
226
M
025
A
T
E060
-55°C to 105°C
Capacitor
Case
Capacitance
Termination
SeriesCorporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
© KEMET
Electronics
Class
SizeCapacitance
CodeRange
(pF)
Design
Finish
Rated
10Tolerance
– 1,500 µF at 120(VDC)
Hz/25°C
T=
Tantalum
521 =
High
Voltage
Polymer
B,
T,
FirstTolerance
two digits
Capacitance
D, Q,
represent
V, Rated
W, Voltage
signifiRange
cant
X
figures. Third
DF (120 Hz)
digit specifies
number
of kHz)
zeros.
ESR (100
Leakage Current
= ±20% (20%)
016 = 16
A = N/A
T = 100% Matte
MMTolerance
020 = 20
Tin (Sn) plated
2.5 – 25 V
025 = 25
H = Tin/Lead
035 = 35
(SnPb) solder
≤ 10%
050 = 50
coated (5% Pb
063 =Electrical
63
minimum)
Specification Table
Packaging
ESR Code
T2021_TSM • 4/16/2015
(C-Spec)
E = ESR
Last three digits
specify ESR in
mΩ. (060 = 60
mΩ)
2
Blank = 7" Reel
7280 = 13" Reel
≤ 0.1 CV (μA) at rated voltage after 5 minutes
Item
Rated Voltage Range
-55°C to 105°C/125°C (Refer to part number for maximum temperature rating)
4.7 – 330 µF at 120 Hz/25°C
M Tolerance (20%)
16 – 63 V
(120
Hz)• Greenville,
≤ 10% SC
- Refer
to Part
Electrical
Specification Table
© KEMET Electronics Corporation • P.O.DF
Box
5928
29606
(864)Number
963-6300
• www.kemet.com
ESR (100 kHz)
1012
T2015_T520 • 4/16/2015
T522 Series Reduced Leakage Polymer Tantalum
Tantalum Capacitors
SPICE
Surface Mount
Polymer Tantalum KEMET Organic Capacitor (KO-CAP) (cont.)
T522 Series Reduced Leakage Polymer Tantalum
Capacitance Range: 150 toOrdering
T
522
157
V
M
Capacitor
Case
Capacitance
Series
T525Class
Series Polymer
TantalumSize
125°C
Code (pF)
T=
A
T
E025
Termination
Finish
ESR Code
Packaging
(C-Spec)
First two digits
M = ±20%
006 = 6.3
A = N/A
T = 100% Matte
E = ESR
Blank = 7" Reel
Tin (Sn) plated
Last three digits 7280 = 13" Reel
H = Tin/Lead
specify ESR in
specifies number of
(SnPb) solder
mΩ. (025 = 25
For a detailed analysis of specific partzeros.
numbers, please visit www.kemet.com for a free download
of KEMET'smΩ)
SPICE software.
coated (5% Pb
The KEMET SPICE program is freeware intended to aid design engineers in analyzing the
performance of these capacitors over
minimum)
Tantalum
SPICE
522 =
Reduced
Leakage
Polymer
006
Tolerance
(VDC)
Design
V, Y
T525 Series Polymer Tantalum 125ºC
Performance
Characteristics
Ordering
Information
μF • Temperature
T
Capacitor
Class
T=
Tantalum
525
Item
D
337
M
006
A
T
-55°C to 105°C
Capacitance
Series
Case Size
Code (pF)
Tolerance
(VDC)
Design
150 – 470 uF
at 120 Hz/25°C
E025
Termination
Finish
525 = Capacitance
A, B, D, Tolerance
First two digits
M =(20%)
±20%
M Tolerance
125°C
T, Y
represent
Rated Voltage Range
6.3 V
Rated
significant
Polymer
DF (120specifi
Hz) es number
≤ 10%
2R5 = 2.5
A = N/A
T = 100% Matte
003 = 3
Tin (Sn) Plated
004 = 4
H = Tin/Lead
006 = 6.3
(SnPb) Solder
008 = 8
Coated (5% Pb
010 = 10Specification Table 1 minimum)
ESR (100 kHz)of zeros.
016 = 16
KEMET Organic Capacitor (KO-CAP)
– LowCurrent
ESR
Leakage
T527 Series Facedown Terminal Polymer Tantalum
ESR
Last three
digits specify
ESR in mΩ.
(025 = 25
mΩ)
Packaging
(C-Spec)
Blank = 7" Reel
7280 = 13" Reel
T527 Series Facedown Terminal Polymer Tantalum
Ordering
Information
Performance
Characteristics
μF • Temperature
T
527 Item
I
476
M
006
A
T
Performance
Characteristics
E200
T528 Series Low ESL Facedown Terminal Polymer Tantalum
Capacitor
Capacitance
Failure Rate/
Temperature
-55°C to 125°CCapacitance
Series Operating
Case Size
Voltage
Lead Material
ESR Code
Class
Code (pF)
Tolerance
Design
Rated
Capacitance
Range
10
–
680
µF
at
120
Hz/25°C
SPICE
T=
527 =
I = 3216
M = ±20%
004 = 4 V
A = N/A
T = 100% Tin
E = ESR
Tantalum
Facedown Capacitance Tolerance
significant figures.
Third (20%)
006 = 6.3 V
(Sn)
Last three digits
M Tolerance
specifiesplease
numbervisit www.kemet.com
010 =for
10aVfree download of KEMET's SPICE software.
specify ESR in mΩ
For a detailed Terminal
analysis of specific partdigit
numbers,
Rated Voltage Range of zeros.
2.5 – 16 V
Polymer
(200 = 200 mΩ)
The KEMET SPICE program is freewaree.g.,
intended
to
aid
design
engineers
in
analyzing
the
performance
of
these
capacitors
over
476 = 47 µF
DF
(120
Hz)
≤
10%
ESR (100 kHz)
T528 Series Low ESL Facedown Terminal Polymer Tantalum
Leakage Current
© KEMET
Corporation
• P.O. Box
5928 • to
Greenville,
SC 29606 (864) 963-6300 • www.kemet.com
Ordering
Information
Performance
Characteristics
μF •Electronics
Temperature
Range:
−55°C
+105°C
T
Capacitor
Class
T=
Tantalum
528 Item Z
337
M
2R5
Specifi
A cations T
-55°C to Capacitance
105°C
Capacitance
Series
Case Size
Code
(pF)
Tolerance
(VDC)
Design
22 µF to 100
µF @ 120 Hz/25°C
528 =
B = 3528-21
First two digits
M = ±20%
002 = 2
A = N/A
Low ESL
WCapacitance
= 7343-15 Tolerance
representM Tolerance (20%)
2R5 = 2.5
Facedown Z =Rated
7343-17
significant4 – 10 V
004 = 4
Voltage Range
Terminal
006 = 6.3
DF (120
Hz)es number
Polymer
specifi
of zeros.
ESR (100 kHz)
Leakage Current
T2030_T522 • 4/16/2015
ESR Code
T = 100%
Matte Tin (Sn)
plated
P = Ni-Pd-Au
plated
E = ESR
Last three
digits specify
ESR in mΩ
(009 = 9 mΩ)
Packaging
(C-Spec)
Blank = 7"
Reel
7280 = 13"
Reel
Item
E009
Termination
Finish
© KEMET Electronics Characteristics
Performance
102
2
-55°C to 105°C
33 – 470 µF at 120 Hz/25°C
M Tolerance (20%)
T2017_T525 • 4/16/2015
2
Tantalum Capacitors
RoHS Compliant (6/6) according to Directive 2002/95/EC. Halogen free.
Surface Mount
Organic Capacitor (KO-CAP) – Low ESR
Polymer TantalumKEMET
KEMET
Organic Capacitor (KO-CAP) (cont.)
T530 Series High Capacitance Polymer Tantalum 125°C
T529 Series Small Case Size Substrate Terminal Polymer Tantalum
Ordering
Information
SPICE
μF • Temperature
For aTdetailed analysis
please visit www.kemet.com
for
529 of specifi
P c part numbers,
476
M
006a free download
A of KEMET's
A SPICE software.
E200
The
KEMET SPICE program is freeware intended
to aid design
engineers in analyzing the
performance
Capacitor
Capacitance
Capacitance
Failure
Rate/
Series
Case Size
Voltage
Lead Material
ESR Code
frequency,
conditions.
Class temperature, ripple, and DC bias Code
(pF)
Tolerance
Design
T=
Tantalum
529 =
Substrate
Terminal
Polymer
Applications
P = 2012-10
I = 3216-10
First two digits
specifies number of
zeros.
e.g., 476 = 47 µF
M = ±20%
006 = 6.3 V
010 = 10 V
A = N/A
A = Ni - Au
E = ESR
Last three digits
specify ESR in mΩ
(200 = 200 mΩ)
Typical applications include high speed server, microprocessor decoupling and high ripple current applications.
T545 Series High Energy Polymer Tantalum
T530 Series High Capacitance
Polymer Tantalum 125ºC
Performance
Characteristics
Capacitance Range: 150 toOrdering
1,500 μF • Information
Temperature
Specifi
337
T
530Item
X
M
010
A cations
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.
T
E005
-55°C to 105°C
Capacitance
Termination
Packaging
Series
Case Size
ESR Code
Code (pF)
Tolerance
(VDC)
Design
Finish
(C-Spec)
22 µF to 150 µF @ 120 Hz/25°C
T=
530 = High
D, X, Y
First two digits
M = ±20%
2R5 = 2.5
A = N/A
T = 100% Matte
E = ESR
Blank = 7"
M Tolerance
Tantalum
CapacitanceCapacitance Tolerance
represent signifi
cant (20%)
003 = 3
Tin (Sn) plated*
Last three
Reel
SPICE
125°C Rated
004 = 4
H = Standard
digits
7280 = 13"
Rated Voltage Range
6.3 V and 10 V
Polymer
specifies number of
006 = 6.3
solder Coated
specify ESR Reel
For a detailed analysis of specificDF
part
please
visitNumber
www.kemet.com
a freeTable
download(SnPb
of KEMET's
010 Specifi
= 10forcation
5% Pb SPICE
in mΩsoftware.
(005
(120numbers,
Hz) zeros.
Refer
to Part
Electrical
016 =in16analyzing the performance
minimum)of these capacitors
= 5 mΩ ) over
ESR (100 kHz)
Capacitor
Class
* For gold plated termination pleaseLeakage
contact Current
KEMET representative
T545 Series High Energy Polymer Tantalum
Ordering
μF • Temperature
T
545Characteristics
H
Performance
Tantalum Stack Polymer (TSP) Series
Capacitor
Series
Case Size
Class
Item
SPICE
T=
108
M
006
A
T
E055
Capacitance Rated Voltage Failure Rate/ Termination
Tolerance
(VDC)
Design
Finish
Performance
Characteristics
Packaging
(C-Spec)
ESR
A = N/A
T = 100%
ESR in mΩ Blank = 7" Reel
High
H, V, W, Temperature
First two digits -55°C
represent
M = ±20%
006 = 6.3
Operating
to 125°C
Tin (Sn)
7280 = 13" Reel
Energy
X, Y
K = ±10 %
008 = 8
For a detailedPolymer
analysis
of specifi
c part
numbers,
please
visit
Rated
Capacitance
Range
– 1,500
µF www.kemet.com
at 120 Hz/25°C
digit
specifies150
number
010 = 10for a free download of KEMET's SPICE software.
Tantalumprogram is freeware intended
of zeros. to aid design engineers
016 in
= 16
The KEMET SPICE
analyzing the performance of these capacitors over
M Tolerance (20%)
020 = 20
Rated Voltage Range
2.5 – 16 V
Tantalum
Box
5928
(120
Hz)• Greenville,
8% SC 29606 (864) 963-6300 • www.kemet.com
Tantalum Stack Polymer (TSP) Series
ESR (100 kHz)
T2070_T529 • 4/16/2015
2
Ordering
Information
μF • Temperature
Performance
Characteristics
Leakage Current
T
Capacitor
Class
SP
Series
2D
Item
207
Capacitance
Case
Size Temperature
Operating
Code (pF)
M
010
Capacitance
-55°C
to 125°C Voltage
Tolerance
A
H
65
Failure Rate/
Lead Material
Design
T=
Tantalum
Stacks Rated
2B, 3B,
First two
digits 47MμF
= ±20%
003
3 VHz/25°C
A = N/A
H = Standard
Capacitance
Range
– 1,500 μF
at =120
Polymer 4B, 6B,
represent
004 = 4 V
Solder
Tolerance
K Tolerance (10%),
(20%)
Cathode 2D,Capacitance
3D,
signifi
cant
006M= Tolerance
6.3 V
Coated
4D, 6D figures. Third digit
010 = 10 V
(SnPb 5% Pb
Rated Voltage Range
6.3 – 20 V
specifi
number
016
= 16963-6300
V
minimum)
© KEMET Electronics Corporation • P.O.
Boxes5928
(864)
• www.kemet.com
zeros.
DFof(120
Hz)
(100COTS.
kHz)
Note: These TSP Stacks are specific ESR
to T540
Leakage Current
Surge
20
D540
ESR
C-Spec 2
65 = No Surge
10 = ESR - Designates
66 = 10 cycles
Standard
discrete
@ 25°C
20 = ESR- component
67 = 10 cycles
Low
series.
-55°C and 85°CT2019_T530 • 4/16/2015
D540 =
2
T540
Item
-55°C to 125°C
66 – 4080 μF @ 120 Hz/25° C
M Tolerance (20%)
103
Aluminum Organic Capacitor (AO-CAP)
A700 Series Polymer Aluminum
Tantalum Capacitors
SPICE
Surface Mount
Polymer Aluminum Organic Capacitor (AO-CAP)
A700 Series Polymer Aluminum
Ordering
Information
µF • Temperature
A
Capacitor
Class
700
Series
V
476
M
006
A
T
E018
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance
Rated Voltage
(VDC)
Failure Rate/
Design
Termination
Finish
ESR Code
M = ±20%
002 = 2
2R5 = 2.5
004 = 4
006 = 6.3
008 = 8
010 = 10
12R = 12.5
016 = 16
A = N/A
T = 100%
Matte Tin
(Sn) plated
A=
700 =
D, V, X
First two digits
Tantalum
Surface Mount
Capacitors – Automotive Grade
Aluminum
Aluminum
represent
Polymer
significant
T498 Series Automotive
Grade MnO2 150°C
figures. Third
digit specifies
number of
SPICE
zeros.
E = ESR
Last three
digits specify
ESR in mΩ
(018 = 18
mΩ)
Packaging
(C-Spec)
Blank = 7"
Reel
7280 = 13"
Reel
High Temperature
T498 Series Automotive Grade MnO2 150ºC
Information
Item Range: −55°C to +150°C
T
498
X
-55°C to 125°C
227
M
010
A
T
E500
6.8 – 560 µF at 120 Hz/25°C
Capacitor
Tantalum
Surface Mount
Capacitors –Case
AutomotiveCapacitance
Grade
Series
Termination Finish
Class
Size
Code
(pF)
Tolerance
(VDC)
Design
Capacitance
Tolerance
M
Tolerance
(20%)
T499 Series Automotive Grade MnO 175°C
ESR
2
T=
Tantalum
Packaging
(C-Spec)
High
A, B,Voltage
C, D, XRange
First two2digits
006 = 6.3
A = N/A
T = 100% Matte
E = ESR
Blank = 7"
Rated
– 16 V K = ±10%
Temperature
represent
M = ±20%
010 = 10
Tin (Sn) plated*
Last three
Reel
SPICE
DF (120 Hz)significant
6%
150ºC
015 = 15
G = Gold plated digits specify 7280 = 13"
figures. Third
020 = 20
H = Standard
ESR in mΩ
Reel
ESR (100 kHz)
digit specifi
es
025 = 25 for a free download
solder
coated
(500 =software.
500
For a detailed analysis of specific part numbers,
please
visit www.kemet.com
of KEMET's
SPICE
The
≤ 4ofV Rating: ≤ 0.06 CV (µA)
rated voltage after 5 minutes
number
035 at
= 35
(SnPb 5% Pb
mΩ)
Leakage intended
Current to aid design engineers in analyzing the performance of these capacitors over frequenKEMET SPICE program is freeware
> 4 V Rating: ≤ 0.04 CV (µA)
rated voltage after 5 minutes
zeros.
050 at
= 50
minimum)
cy, temperature, ripple, and DC bias conditions.
T499 Series Automotive Grade MnO2 175ºC
Information
Performance
Characteristics
T
Capacitor
Class
499 Item X
227
M
010
A
T
Performance
Characteristics
Case Temperature
Capacitance -55°C
Capacitance
Operating
to 150°C Rated Voltage Failure Rate/
Size
Code (pF)
Tolerance
(VDC)
Design
0.33 – 220 μF at 120 Hz/25°C
T=
High
A, B,
First two digits
K = ±10%
006 = 6.3
A = N/A
Tantalum Temperature Capacitance
C, D,
represent K Tolerance
M = ±20%
010Tolerance
= 10
Tolerance
(10%), M
(20%)
175ºC
X
significant
015 = 15
Rated Voltage
Range
figures.
Third digit6 – 50 V
020 = 20
specifies number
025 = 25
DF (120 Hz)
zeros.
035 963-6300
= 35
© KEMET Electronics Corporation • P.O. Boxof5928
• Greenville, SC 29606 (864)
• www.kemet.com
050
= 50 Specification Table
ESR (100 kHz)
Electrical
Tantalum Surface Mount Capacitors – High Temperature
Leakage Current
T500 Series MnO2 200°C
Series
Termination
Finish
E500
ESR
T = 100% Matte
Tin (Sn) plated
G = Gold plated
H = Standard
solder coated
(SnPb 5% Pb
minimum)
E = ESR Last
three digits
specify ESR
in mΩ (500 =
500 mΩ)
Packaging
(C-Spec)
Blank = 7"
Reel
7280 = 13"
Reel
T2020_A700 • 4/16/2015
2
T500 Series MnO2 200ºC
Ordering
Information
μF • Temperature
Performance
Characteristics
T
Capacitor
Class
T=
Tantalum
500
Item
X
227
M
010
-55°C to 175°C
Case Capacitance Code Capacitance Rated Voltage
Series
RatedSize
Capacitance Range
0.15Tolerance
– 220 μF at 120 (VDC)
Hz/25°C
(pF)
High
X
First
two digits
Capacitance
Tolerance
Temperature
represent
200°C
signifi
cant
Rated Voltage
Range
figures. Third
DF(120
Hz)es
digit specifi
number
of
zeros.
ESR (100 kHz)
Leakage Current
A
G
Failure Rate/
Design
Termination
Finish
= ±10% (10%),
010
10
A = N/A
K KTolerance
M =Tolerance
(20%)
M = ±20%
016 = 16
B= 0.1%/1,000
035 = 35
hours
6 – 50 V
10
Performance
ESR
61 = Surge None
62 = Surge at
25°C after Weibull
63 = Surge -55°C
and +85°C after
Weibull
10 = Standard
ESR
104
G = Gold
plated
61
T2053_T498_AUTO • 4/16/2015
2
• Symmetrical,
compliant
terminations
Tantalum
Surface Mount
Capacitors
– High Reliability
• Capacitance values of 0.1 μF to 470 μF
• 100% surge current test available on all case sizes
• Termination options B, C, H, K, T, N & M
• Approved for DLA Drawing 07016 applications*
• Laser-marked
case Efficiency Facedown Commercial Off-The-Shelf (COTS)
• All
parts tested per Group A of MIL–PRF–55365
T428
Series High Volumetric
MnO
2
SPICE
Tantalum Capacitors
Surface Mount
* Defense Logistics Agency (DLA), previously identified as DSCC
frequency,
temperature, ripple, and DC bias conditions.
Applications
High Reliability Commercial Off-The-Shelf (COTS)
Typical applications include decoupling and filtering in military and aerospace applications.
T428 Series High Volumetric Efficiency Facedown COTS MnO2
Ordering
Information
μF • Temperature
Environmental
T
428 Compliance
P
227
K
006
A
H
Capacitor
Case Capacitance Capacitance
Failure Rate/
Series
Voltage
Lead Material
RoHS
Compliant
(6/6) according
toCode
Directive
100% Sn solder.
Class
Size
(pF) 2002/95/EC
Tolerance when ordered with
Design
T=
Tantalum
High
Volumetric
Efficiency
Facedown
Hi-Rel MnO2
COTS
61
10
Surge
ESR
P
First two digits J = ±5%
004 = 4 V
A = N/A
H = Standard solder 61 = None
10 = Standard
represent
K = ±10%
006 = 6.3 V B = 0.1%/1,000 coated (SnPb 5% Pb) 62 = 10 cycles, 20 = Low
significant
M = ±20%
010 = 10 V hours
T = 100% tin (Sn)
25°C
30 = Ultra-low
figures. Third
016 = 16 V
63 = 10 cycles,
SPICE
digit specifies
020 = 20 V
-55°C and 85°C
number of
= 25 V
For a detailed analysis of specific part
numbers, please visit025
www.kemet.com
for a free download of KEMET's SPICE software.
zeros.
035 = 35 V
The KEMET SPICE program is freeware intended to aid design
in analyzing the performance of these capacitors over
050 =engineers
50 V
T493 Series COTS MnO2 (CWR11 Style)
Ordering
Capacitance Range: 0.1 μFPerformance
to 470 μF •Information
Temperature
Characteristics
T
493
Capacitor
Class
D
Item
K
227
006
C
H
Performance
Characteristics
Case
Failure Rate/
Series
Termination Finish
-55°C to 125°C
Size
Code (pF)
Tolerance
(VDC)
Design
Range J = ±5%
15 – 470 μF004
@ 120
T=
Military Rated
A, B, Capacitance
First two digits
= 4 Hz/25°CA = N/A
C = Hot solder dipped
Tantalum
COTS
C, D,
represent
K = ±10%
006 = 6.3
B = 0.1%/1,000 H = Standard solder
Capacitance
Tolerance
J
Tolerance
(5%),
K
Tolerance
(10%),
M
Tolerance
(20%)
E, X
significant
M = ±20%
010 = 10
hours
coated
(SnPb 5% Pb
fi
gures.
Third
016
=
16
C
=
0.01%/1,000
minimum)
Rated Voltage Range
4 – 50 V
digit specifies
020 = 20
hours
B = Gold plated
Tantalum Surface Mount Capacitors –number
High
Reliability
DF (120
Refer to Part
of Hz)
025Number
= 25 Electrical Specification Table
K = Solder fused
T493 Series Commercial Off-The-Shelf zeros.
(COTS) MnO (CWR11 Style)035 = 35
T = 100% Tin
ESR (100 kHz) 2 Refer to Part
Number
Electrical
Specifi
cation
Table
050 = 50
N = Non-magnetic
Tantalum Surface Mount Capacitors – High Reliability
063 =at63
Leakage Current
≤ 0.01 CV (µA)
rated voltage after 5 minutes100% Tin (Sn)
Ordering
Information
– DLA
07016
M = Non-magnetic
Style)
T493 Series Commercial
Off-The-Shelf
(COTS)Drawing
MnO2 (CWR11
(SnPb)
07016-
001
Drawing Number
Dash Number
K
20
Surge
ESR
61 = None
62 = 10 Cycles after
Weibull, 25ºC
63 = 10 cycles after
Weibull, -55ºC and
85ºC after Weibull
64 = 10 cycles
before Weibull,-55°
and +85°C
10 = ESR –
Standard
20 = ESR –
Low
30 = ESR –
Ultra low
B
H
A
Reliability Grade
Termination Finish
Surge
For detailed partInformation
number offerings, please
referDrawing
to: Table 1A –07016
COTS, Table 1B – DLA Drawing 07016
Ordering
DLA
Drawing
07016 – DLA
Capacitance
Tolerance
61
07016001Number
K
© KEMET
• P.O. Box J5928
• Greenville,
SCB29606
(864) B
963-6300
See Part
= ±5%
= 0.1%/1,000
hours • www.kemet.com
C = Hot solderHdipped
Drawing Number
Table
Dash Number
See Part Number
Table
K =Capacitance
±10%
M = Tolerance
±20%
J = ±5%
K = ±10%
M = ±20%
C = 0.01%/1,000 hours
Reliability Grade
B = 0.1%/1,000 hours
C = 0.01%/1,000 hours
A• 4/16/2015
2
AT2007_T493
= + 25ºC after
Weibull
B = -55ºC and +85ºC after
Surge
Weibull
C
before
A == -55ºC
+ 25ºCand
after+ 85ºC
Weibull
Weibull
B = -55ºC and +85ºC after
ZWeibull
or no option= No test
required
C = -55ºC and + 85ºC before
Weibull
Z or no option= No test
required
H = Standard solder coated
Termination Finish
(SnPb 5% Pb minimum)
BC == Gold
plateddipped
Hot solder
H = Standard solder coated
(SnPb 5% Pb minimum)
B = Gold plated
For detailed part number offerings, please refer to: Table 1A – COTS, Table 1B – DLA Drawing 07016
Ordering
– F-Tech
Simulated
Breakdown
(SBDS)
ForKEMET
detailedElectronics
partInformation
number
offerings, •please
refer
to: Table
1A – COTS,
Table
1B – 963-6300
DLA Drawing
07016
©
Corporation
P.O.
Box
5928
•&Greenville,
SC 29606
(864)
•Screening
www.kemet.com
F-Tech
& Simulated
Breakdown
Screening
(SBDS)
T
493
D
226
020 Breakdown
C
H (SBDS)
Ordering
Information
– F-Tech &K Simulated
Screening
Capacitor
Series
Class
Case
Size
Capacitance
Code (pF)
493 A,DB, First 226
TT=
Military
two digits
Capacitor
Tantalum COTS Case
C, D, Capacitance
represent
Series
Class
Size
Code cant
(pF)
E, X
signifi
figures.
T=
Military A, B, First
twoThird
digits
specifies
Tantalum COTS C, D, digit
represent
number
of
E, X
significant
zeros.
figures.
Third
digit specifies
number of
zeros.
Tolerance
(VDC)
Design
K
J = ±5%
020020
= 20
Capacitance
Rated
K = ±10%
025 =Voltage
25
MTolerance
= ±20%
035(VDC)
= 35
050
J = ±5%
020 == 50
20
063
K = ±10%
025 == 63
25
M = ±20%
035 = 35
050 = 50
063 = 63
Termination Finish
C
A = N/A
Failure
B = Rate/
Design
0.1%/1,000
hours
A = N/A
C
B ==
0.01%/1,000
0.1%/1,000
hours
hours
C=
0.01%/1,000
hours
H dipped
C = Hot solder
H = Standard solder
Termination Finish
coated (SnPb 5% Pb
minimum)
BH == Gold
plated
K=
Standard
solder
Solder
coated fused
(SnPb 5% Pb
Kminimum)
= Solder fused
TB == 100%
Tin K =
Gold plated
N
= Non-magnetic
Solder
fused
100%
Tin (Sn)
K = Solder
fused
M
Non-magnetic
T == 100%
Tin
(SnPb)
N = Non-magnetic
100% Tin (Sn)
* Select "C", "D" and "X" case sizes in 20 V and higher rated voltage
M = Non-magnetic
(SnPb)
* Select "C", "D" and "X" case sizes in 20 V and higher rated voltage
T2058_T428 • 4/16/2015
61
Surge
61
61 = None
62 = 10 Cycles
Surge
after Weibull, 25ºC
61 = None
Weibull, -55ºC and
62 = 10 Cycles
85ºC after Weibull
after Weibull, 25ºC
64 = 10 cycles
Weibull, -55ºC and
and +85°C
85ºC after Weibull
64 = 10 cycles
and +85°C
2
20
Screening/ESR
20 +
11 = F-Tech
SBDS *
Screening/ESR
12 = SBDS
13 = F-Tech *
11 = F-Tech +
21 = Low ESR + 11
SBDS *
22= Low ESR + 12
12 = SBDS
23 = Low ESR + 13
13 = F-Tech *
31= Ultra Low ESR
21 = Low ESR + 11
+ 11
22= Low ESR + 12
32 = Ultra Low ESR
23 = Low ESR + 13
+ 12
31= Ultra Low ESR
33 = Ultra Low ESR
+ 11
+ 13
32 = Ultra Low ESR
+ 12
33 = Ultra Low ESR
+ 13
105
Tantalum Capacitors
Surface Mount
Tantalum
Tantalum Surface
Surface Mount
Mount Capacitors
Capacitors –– High
High Reliability
Reliability
DLA
T495
Commercial
Low
High Reliability Commercial
(COTS)
DLA Drawing
Drawing 95158
95158
T495 Series
Series Surge
Surge Robust
Robust Off-The-Shelf
Commercial Off-The-Shelf
Off-The-Shelf (COTS)
(COTS)
Low ESR
ESR MnO
MnO(cont.)
22
T495 Series Surge Robust COTS MnO2
Ordering
Information
μF • Temperature
T
T
495
495
Capacitor
Capacitor
Class
Class
T
T ==
Tantalum
Tantalum
X
X
107
107
M
M
Series
Series
Case Size
Size
Case
Capacitance
Capacitance
Code (pF)
(pF)
Code
Capacitance
Capacitance
Tolerance
Tolerance
Surge
Surge
Robust
Robust
Low
Low ESR
ESR
C,
C, D,
D, X
X
First
First two
two digits
digits
represent
represent signifi
significant
cant
fifigures.
Third
gures. Third digit
digit
specifi
specifies
es number
number of
of
zeros.
zeros.
K
K == ±10%
±10%
M
M == ±20%
±20%
A
A
Voltage
Voltage
Failure
Failure Rate/
Rate/
Design
Design
006
006 == 6.3
6.3 V
V
010
010 == 10
10 V
V
016
=
16
V
016 = 16 V
020
020 == 20
20 V
V
025
025 == 25
25 V
V
035
035 == 35
35 V
V
050
050 == 50
50 V
V
A
A == N/A
N/A
H
H
4095
4095
Lead
Lead Material
Material
H
H == Standard
Standard
Solder
Solder Coated
Coated
(SnPb
(SnPb 5%
5% Pb
Pb
minimum)
minimum)
B
B == Gold
Gold Plated
Plated
Customer
Customer
Specifi
Specification
cation
Tested
to
Tested to meet
meet
the
the Established
Established
Reliability
Reliability
Packaging
Packaging
(C-Spec)
(C-Spec)
Blank
Blank == 7"
7" Reel
Reel
7280
7280 == 13"
13" Reel
Reel
Ordering
Information – DLA Drawing 95158
DLA
TantalumDrawing
Surface Mount95158
Capacitors – High Reliability
and DLA
DLA Drawing
Drawing 04053
04053
T496 Series
Series Fused
Fused Commercial
(COTS) MnO
MnO2 and
T496
9515895158-
010
010
07
07
M
M
H
H
2
Capacitance
Capacitance
Drawing
Dash Number
Number
Termination
Drawing Number
Number
Dash
Termination Finish
Finish
SPICE
Tolerance
Tolerance
Capacitor,
±10%
H
Capacitor, Fixed,
Fixed, See
See Part
Part Number
Number K
K == ±10%
H == Solder
Solder Plated
Plated
ForTantalum
a detailed
analysis ofList
numbers,
please
visitPlated
www.kemet.com for a free download of KEMET's SPICE software.
Listspecific part
M
B=
Tantalum Chip,
Chip,
M == ±20%
±20%
B= Gold
Gold Plated
Low
The KEMET
Low ESR
ESR SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over
T496 Series Fused COTS MnO2
Characteristics
Ordering
Information
Capacitance Range: 0.15 toPerformance
T
496
Capacitor
Capacitor
Class
Class
Series
Series
T
T ==
Tantalum
Tantalum
Fail
Fail
Safe
Safe
Item
Item
X
227
M
010
B Performance TCharacteristics61
Temperature
-55°C
to
Operating
Temperature
-55°C Rated
to 125°C
125°C
CaseOperating
Capacitance
Capacitance
Rated
Voltage Failure
Termination
Case
Capacitance
Capacitance
Voltage
Failure Rate/
Rate/
Termination
Size
Code
(pF)
Tolerance
(VDC)
Design
Finish
Size
Code
(pF)
Tolerance
(VDC)
Design
Finish
Rated Capacitance
Capacitance Range
Range
4.7 μF
μF –– 220
220
μF @
@ 120
120 Hz/25°
Hz/25°
C
Rated
4.7
μF
C
B,
C,
First
two
digits
K
=
±10%
004
=
4
B
=
0.1%/1,000
T
=
100%
B, C,Capacitance
First twoTolerance
digits K = ±10%
004 =(10%),
4 M Tolerance
B = 0.1%/1,000
T = 100% Matte
Matte
K
(20%)
ToleranceM
K Tolerance
Tolerance
D,
represent
006
6.3
hours
Tin
D, X
XCapacitance
represent
M == ±20%
±20%
006 ==(10%),
6.3 M Tolerance
hours (20%)
Tin (Sn)
(Sn) plated
plated
signifi
cant
010
=
10
C
=
0.01%/1,000
H
=
Standard
cantRange
C = 0.01%/1,000 H = Standard
Ratedsignifi
Voltage
Range
V –– 50
50010
V = 10
Rated
Voltage
66 V
V
fifigures.
015
hours
solder
gures. Third
Third
015 == 15
15
hours
solder coated
coated
DF
Refer
Part
Electrical
Specifi
Table
digit
es
20
D
(SnPb
5%
DF (120
(120
Hz)
Refer to
to 020
Part==Number
Number
Electrical
Specification
cation
Table
digit specifi
specifi
es Hz)
020
20
D == 0.001%/
0.001%/
(SnPb
5% Pb
Pb
number
of
025
== 25
1,000
minimum)
number
of kHz)
025
25
1,000 hours
hours
minimum)
ESR
(100
Refer
to
Part
Number
Electrical
Specifi
cation
Table
ESR
(100 kHz)
Refer to 035
Part==Number
Electrical
Specification
zeros.
35
A
C
Hot
zeros.
035
35
A == Non-Weibull
Non-Weibull
C ==Table
Hot solder
solder
50
Graded
dipped
050
50
Graded Specifi
dipped
Leakage Current
Current
Refer to
to 050
Part==Number
Number
Electrical
Specification
cation
Table
Leakage
Refer
Part
Electrical
Table
K
K == Solder
Solder Fused
Fused
61
61 == Surge
Surge None
None
62
62 == Surge
Surge
at
25°C
at 25°C
after Weibull
Weibull
after
63 == Surge
Surge
63
-55°C and
and +85°C
+85°C
-55°C
after Weibull
Weibull
after
64
64 == Surge
Surge
-55°C
-55°C and
and +85°C
+85°C
before Weibull
Weibull
before
ESR
ESR
10 ==
10
Standard
Standard
20 == Low
Low
20
Packaging
Packaging
(C-Spec)
(C-Spec)
Blank
Blank == 7"
7"
Reel
Reel
7280
=
13"
7280 = 13"
Reel
Reel
Ordering
Information
DLA Drawing
04053 DLA Drawing 04053
04053-
001
Drawing Number
Number
Drawing
B
Dash
Dash Number
Number
Reliability
Reliability Grade
Grade
See
See Part
Part Number
Number List
List
B
B == 0.1%/1,000
0.1%/1,000 hours
hours
C == 0.01%/1,000
0.01%/1,000 hours
hours
C
D == 0.001%/1,000
0.001%/1,000 hours
hours
D
A == Non-Weibull
Non-Weibull Graded
Graded
A
©
© KEMET
KEMET Electronics
P.O. Box
Box 5928
Greenville, SC
SC 29606
29606 (864)
(864) 963-6300
www.kemet.com
Item
T2071_T495_COTS
T2071_T495_COTS •• 4/16/2015
4/16/2015
Temperature
Operating
Rated
Rated Capacitance
Capacitance Range
Range
Tolerance
Capacitance
Rated Voltage
Voltage Range
Range
Rated
106
Performance
Performance
10
-55°C to
to 125°C
125°C
-55°C
0.15
0.15 μF
μF –– 470
470 μF
μF at
at 120
120 Hz/25°C
Hz/25°C
K Tolerance
Tolerance (10%),
(10%), M
M Tolerance
Tolerance (20%)
(20%)
K
50 V
V
44 –– 50
DF
DF (120
(120 Hz)
Hz)
Refer
Refer to
to Part
Part Number
Number Electrical
Electrical Specifi
Specification
cation Table
Table
ESR (100
(100 kHz)
kHz)
ESR
Refer to
to Part
Part Number
Number Electrical
Electrical Specifi
Specification
cation Table
Table
Refer
Leakage
Leakage Current
Current
≤
≤ 0.01
0.01 CV
CV (µA)
(µA) at
at rated
rated voltage
voltage after
after 55 minutes
minutes
22
SPICE
Tantalum Capacitors
Surface Mount
High Reliability Commercial Off-The-Shelf (COTS) (cont.)
T497 Series COTS MnO2 (CWR09/19/29 Style)
Ordering
Information
μF • Temperature
T
Capacitor
Class
497
G
226
K
Series
Case
Size
Capacitance
Code (pF)
Capacitance
Tolerance
A, B,
C, D,
E, F,
G, H,
X
First two digits
represent
significant figures.
Third digit specifies
number of zeros.
K = ±10%
M = ±20%
T=
High Grade
Tantalum
COTS
020
A
H
61
10
Voltage
Failure Rate/
Design
Lead Material
Surge
X-ray
A = N/A
B=
0.1%/1,000
hours
C=
0.01%/1,000
hours
T = 100% Matte
Tin (Sn) Plated
H = Standard
Solder Coated
(SnPb 5% Pb
minimum)
B = Gold Plated
61 = Standard (inprocess)
62 = 10 Cycles After
Weibull, 25°C
Weibull, -55° and 85°C
64 = 10 Cycles Before
10 = None
15 = 100%
004 = 4 V
006 = 6.3 V
010 = 10 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
T497 Series Commercial Off-The-Shelf (COTS) MnO2 (CWR09/19/29 Style)
F-Tech
Simulated Breakdown
Screening
(SBDS) Screening (SBDS)
Ordering&Information
– F-Tech & Simulated
Breakdown
T
Capacitor
Class
497
H
226
K
Series
Case
Size
Capacitance
Code (pF)
Capacitance
Tolerance
020
A
H
61
10
Voltage
Failure Rate/
Design
Lead Material
Surge
Design/Screening
T=
High
H
First two digits
K = ±10%
020 = 20V A = N/A
T = 100%
61 = Standard (in10 = Standard
Grade Corporation represent
= ±20% SC025
= 25V
Matte Tin (Sn) process)
11 = •F-Tech
&
©Tantalum
KEMET Electronics
• P.O. Box 5928 M
• Greenville,
29606
(864)B=0.1%/1,000
T2011_T497
4/16/2015
2
COTS
significant
035 = 35V hours
Plated
SBDS *
Tantalum Surface Mount Capacitors
figures.– High
ThirdReliability
digit
050 = 50V C=.01%/1,000 H = Standard Weibull, 25°C
12 = SBDS
T513 Series Commercial Off-The-Shelf
MnO2
specifies(COTS)
numberMultiple Anode Low ESR COTShours
13 = F-Tech *
Solder
of zeros.
Coated
15 = 100% X-ray
(SnPb 5% Pb 64 = 10 Cycles Before
16 = F-Tech & SBDS
SPICE
minimum)
& 100% X-ray *
B = Gold
17 = SBDS & 100%
X-ray
For a detailed analysis of specific part numbers, please visit www.kemet.com for Plated
a free download of KEMET's SPICE software.
The
= F-Tech & 100%
KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors18over
frequenX-ray *
cy, temperature, ripple, and DC bias conditions.
* Select "C", "D" and "X" case sizes in 20V and higher rated voltage
T513 Series COTS Multiple Anode MnO2
Ordering
μF • Temperature
Performance
Characteristics
T
513
Capacitor
Class
Series
T=
Tantalum
Multiple
Anode
COTS
X
Item
108
K
004
Case
Capacitance
Capacitance
Voltage
Operating Code
Temperature
-55°C to 125°C
Size
(pF)
Tolerance
Rated
D, E, Capacitance
First twoRange
digits
X
represent
Capacitance
Tolerance
signifi
cant
figures. Range
Third
Rated Voltage
digit specifies
DF (120
Hz)
number
of zeros.
ESR (100 kHz)
Leakage Current
B
H
61
Failure Rate/
Design
Lead Material
µF – 150004
µF =@4120
C = Hot Solder
K0.1
= ±10%
V Hz/25°C
A = N/A
M = ±20% 006 = 6.3 V B = 0.1%/1,000 Dipped
K Tolerance010
(10%),
hours(20%)
H = Standard
= 10MVTolerance
Solder Coated
4 – 50 V 016 = 16 V
(SnPb 5% Pb
020 = 20 V
Refer to Part025
Number
Table
= 25 VElectrical Specificationminimum)
B = Gold Plated
035 = 35 V
Refer to Part Number Electrical SpecificationKTable
= Solder Fused
T = 100% Tin
10
Surge
ESR
61 = None
62 = 10 cycles, 25°C
after Weibull
63 = 10 cycles, -55°C
& 85°C after Weibull
64 = 10 cycles,
-55°C & 85°C before
Weibull
10 = Standard
ESR
20 = Low ESR
30 = Ultra Low
ESR
Item
Rated Voltage Range
-55°C to 125°C
15 – 1,000 μF @ 120 Hz/25°C
4 – 35 VDC
DF (120 Hz)
ESR (100 kHz)
Leakage Current
107
KEMET Organic Capacitor (KO-CAP) – High Reliability
T540 Series Commercial Off-The-Shelf (COTS) Single Anode Polymer Tantalum
SPICE
SPICE
Tantalum Capacitors
TheaKEMET
program
is freeware
intended
to aidvisit
design
engineers in analyzing
the performance
of these
capacitors
over
For
detailedSPICE
analysis
of specifi
c part numbers,
please
www.kemet.com
for a free download
of KEMET's
SPICE
software.
frequency,
ripple,
DC bias
conditions.
The
KEMETtemperature,
SPICE program
is and
freeware
intended
to aid design engineers in analyzing the performance of these capacitors over
Surface Mount
Ordering
T540 Series COTS Single
AnodeInformation
Polymer Tantalum
Ordering
Information
μF • Temperature
T
540
Capacitor
T
540
Series
Class
Capacitor
Series
T=
540 =
Class
Tantalum Polymer
T=
540 =
COTS
Tantalum Polymer
COTS
D
107
M
Case
D
Size
Case
B,Size
C, D
Capacitance
107
Code (pF)
Capacitance
First
two(pF)
digits
Code
B, C, D
First two digits
specifies number of
zeros.
specifies number of
zeros.
* After Voltage Aging
A
H
65
10
Surge65Option
10
ESR
Surge
65 = 4Option
cycles
at 25°C *
65 = 4 cycles
6625°C
= 10 *
at
cycles at
66 = 10
25°C *
cycles at
67 = 10
25°C
*
cycles -55°C
67 = 10
and 85°C *
cycles -55°C
and 85°C *
10 =ESR
ESR Standard
10 = ESR 20 = ESR Standard
Low
20 = ESR Low
Packaging
(C-Spec)
Packaging
Blank
= 7"
(C-Spec)
Reel
Blank = 7"
7280 = 13"
Reel
Reel
7280 = 13"
Reel
Ordering
Information
DLA
Drawing
04051 – DLA Drawing 04051
Ordering Information – DLA Drawing 04051
04051-
10
Capacitance
Failure
M
10
A Rate/ Lead H
Voltage
Material
Tolerance
Design
Capacitance
Failure Rate/
Voltage
Material
M = ±20% 2R5
= 2.5 V Design
A = N/A Lead
H = Standard
Tolerance
003 = 3 V
Solder
M = ±20% 2R5 = 2.5 V A = N/A
H = Standard
004 = 4 V
Coated
Solder
003 = 3 V
006 = 6.3 V
(SnPb 5% Pb
Coated
004 = 4 V
010 = 10 V
minimum)
006 = 6.3 V
(SnPb 5% Pb
016 = 16 V
010 = 10 V
minimum)
020 = 20 V
016 = 16 V
025 = 25 V
020 = 20 V
035 = 35 V
025 = 25 V
050 = 50 V
035 = 35 V
063 = 63 V
050 = 50 V
063 = 63 V
001
A
KEMET Organic Capacitor (KO-CAP) – High Reliability
KEMET04051Organic Capacitor (KO-CAP)
High Reliability
001 – (COTS)
APolymer
T541
SeriesNumber
Multiple
Anode
Tantalum
Drawing
Dash Number
Surge
Current
Option
T541 Series Commercial Off-The-Shelf (COTS) Multiple Anode Polymer Tantalum
Drawing Number
Dash Number
Surge Current Option
04051
See Part Number List Blank = 4 cycles +25°C ±5°C
SPICE
Before Voltage Aging
04051
See Part Number List Blank = 4 cycles +25°C ±5°C
SPICE
A = 10 cycles +25°C ±5°C After
Before Voltage Aging
Voltage Aging
For a detailed analysis of specific part numbers,
please
visit
www.kemet.com
for a free download of KEMET's SPICE software.
A = 10 cycles
+25°C
±5°C
After
B = 10 cycles
-55°C
±5°C,
+0°C
For
detailedSPICE
analysis
of specifi
c part numbers,
please
visit
www.kemet.com
for a free the
download
of KEMET's
SPICE
software.
Voltage
Aging
TheaKEMET
program
is freeware
intended
to
aid
design
engineers
in
analyzing
performance
of these
capacitors
over
±5°C, and +85°C ±5°C After
The
KEMET
SPICE
program
is
freeware
intended
to
aid
design
engineers
in
analyzing
the
performance
of
these
capacitors
over
B
=
10
cycles
-55°C
±5°C,
+0°C
frequency, temperature, ripple, and DC bias
conditions.
Voltage
Aging
±5°C,conditions.
and +85°C ±5°C After
frequency, temperature, ripple, and DC bias
Voltage Aging
T541 Series COTS Multiple
Anode
Polymer Tantalum
Ordering
Information
Ordering
μF • Temperature
T
T
541
541
Capacitor
Series
Capacitor
Class
Series
Class
T=
541 =
T=
541 =
Tantalum
Polymer
Tantalum Polymer
COTS
COTS
Multiple
Multiple
Anode
Anode
Case
Case
Size
Size
D, X,
D,YX,
Y
M
M
10
10
Ordering
Information
DLA Drawing
04052 – DLA Drawing 04052
Ordering Information – DLA Drawing 04052
Drawing Number
Drawing Number
04052
04052
108
157
157
A
A
H
H
Capacitance
Capacitance
Failure Rate/
Voltage Failure Rate/ Lead Material
Capacitance
Capacitance
Code (pF)
Tolerance
Design
Voltage
Lead Material
Code (pF)
Tolerance
Design
First two digits
M = ±20% 2R5 = 2.5 V A = N/A
H = Standard
2R5 == 32.5
H = Standard
First
two digits
M = ±20% 003
represent
V V A = N/A
Solder
003 = 34 V
Solder
represent
signifi
cant
004
Coated
004 = 46.3V V
Coated5% Pb
signifi
cantdigit
figures.
Third
006
(SnPb
(SnPb
5% Pb
006
6.3VV
fispecifi
gures.esThird
digit
number
010 = 10
minimum)
minimum)
010
specifi
number
of es
zeros.
016 = 10
16 V
016
16 VV
of zeros.
020== 20
020== 20
025
25 VV963-6300 • www.kemet.com
(864)
025 = 25
035
35 V
035 =(864)
35
050
50 V963-6300 • www.kemet.com
050 = 50
063
63 V
063 = 63 V
0405204052-
D
D
001
001
Dash Number
Dash Number
See Part number List
See Part number List
A
A
Blank = 4 cycles +25°C ±5°C
Blank
4 cyclesAging
+25°C ±5°C
Before=Voltage
Before
Voltage+25°C
Aging±5°C After
A = 10 cycles
A
= 10 cycles
Voltage
Aging+25°C ±5°C After
Voltage
Aging-55°C ±5°C, +0°C
B
= 10 cycles
B
= 10 and
cycles
-55°C
±5°C,
+0°C
±5°C,
+85°C
±5°C
After
±5°C,
+85°C ±5°C After
Voltageand
Aging
Voltage Aging
65
65
Surge Option
Surge Option
65 = 4 cycles
65 25°C
= 4 cycles
@
*
@ 25°C *
66 = 10
66 = 10@
cycles
cycles* @
25°C
25°C *
67 = 10
67 = 10-55°C
cycles
cycles
-55°C
and
85°C
and 85°C
10
10
Packaging
ESR
Packaging
(C-Spec)
ESR
(C-Spec)
10 = ESR Blank = 7"
10 = ESR Blank = 7"
Standard
Reel
Standard
Reel
20 = ESR 7280 = 13"
20 = ESR 7280 = 13"
Low
Reel
Low
Reel
30 = ESR 30 = ESR
Ultra
Low ESR
Ultra Low ESR
T2022_T540 • 4/16/2015
2
T2022_T540 • 4/16/2015
2
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.
SPICE
Tantalum Capacitors
Surface Mount
T543 Series COTS Polymer Tantalum
Ordering
μF • Temperature
T
Capacitor
Class
T=
Tantalum
543
Series
Polymer
Tantalum
COTS
D
K
156
Capacitance Code Capacitance
Case Size
(pF)
Tolerance
A, B, C,
D, H, L,
M, T, U,
V, W,
X, Y
First two digits
specifies number of
zeros.
K = ±10%
M = ±20%
035
A
H
E
100
Voltage
Failure Rate/
Design
Lead Material
Surge
ESR
2R5 = 2.5 V
003 = 3 V
004 = 4 V
006 = 6.3 V
010 = 10 V
12R = 12.5 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
063 =63 V
A = N/A
H = Standard
Solder Coated
(SnPb 5% Pb
minimum)
T = 100% Tin
(Sn)
E = None
ESR
S = 10 cycles in mΩ
25°C
W = 10
cycles -55°C
and 85°C
Packaging
(C-Spec)
Blank = 7" Reel
7280 = 13" Reel
Tantalum Surface Mount Capacitors – MIL–PRF (CWR Style)
T409 Series MIL–PRF–55365/4 (CWR09 Style)
MIL–PRF CWR Style
Performance
Characteristics
KEMET
Ordering
Information
Ordering
ItemInformation
Capacitance Range: 0.1 to KEMET
T
Capacitor
T
Class
Capacitor
T=
Class
Tantalum
T=
Tantalum
225
K
A
H
004
Operating
Temperature Capacitance
-55°C to 105°C
Case
Capacitance
A
409
225
K
004
A
Series
Voltage
Failure Rate/Design
Size
Code
(pF)
Tolerance
4.7 – 1,500 μF @ 120 Hz/25°C
Case Capacitance Capacitance
Series
Voltage
Failure Rate/Design
CWR
09
A, B, First two digits J = ±5%
004
= 4 V Weibull
Size
Code
(pF)
Tolerance
Tolerance
Tolerance006
(10%),
MV
Tolerance
(20%)
Established Capacitance
C, D,
represent
K K= ±10%
= 6.3
A = non-ER
CWR 09
A,
B,
First
twocant
digits JM==±5%
004
4 VV Weibull
Reliability
E,Rated
F, Voltage
signifi
±20%
010 == 10
B = (0.1%/1,000 hours)
Range
2.5
–
63
V
Established C,
represent
K = ±10% 006
6.3VV A
G, D,
H figures.
Third
015 == 15
C == non-ER
(0.01%/1,000 hours)
Reliability
E, F, digit
signifi
cantHz)
= ±20%
== 10
B
hours)
es M Refer
020
20 VVElectrical
D == (0.1%/1,000
(0.001%/1,000
hours)
DFspecifi
(120
to Part010
Number
Specification
Table
G, H figures.
015
(0.01%/1,000 hours)
hours)
numberThird
of
025 == 15
25 VV C
T == (0.01%/1,000
ESR
(100
kHz)
Refer to Part020
Number
Electrical
Specifi
cation
Table
digitzeros.
specifi
es
=
20
V
D
=
(0.001%/1,000
hours)
035 = 35 V Exponential
number of
025
== 25
V
TM == (0.01%/1,000
hours)
050
50
V
(1.0%/1,000
hours)
Leakage
Current
≤ 0.1 CV (µA)
after 5 minutes
zeros.
035at=rated
35 Vvoltage
Exponential
P = (0.1%/1,000 hours)
050 = 50 V M
(1.0%/1,000 hours)
R == (0.01%/1,000
hours)
P
(0.1%/1,000 hours)
S ==(0.001%/1,000
hours)
R = (0.01%/1,000 hours)
S =(0.001%/1,000 hours)
Ordering
Information – Defense MIL–PRF–55365/4
MIL–PRF–55365/4
Ordering Information – Defense MIL–PRF–55365/4
CWR09
A
409
J
H
105
K
H
Lead Material
Lead
Material
C
= Hot
Solder
Dipped
C
Solder
H == Hot
Standard
Dipped
Solder Coated
H
= Standard
(SnPb
5% Pb
Solder
Coated
minimum)
(SnPb
5%
Pb
B = Gold Plated
minimum)
K = Solder
B = Gold Plated
Fused
K = Solder
Fused
4252
7280
4252
Surge
Packaging
7280
(C-Spec)
Packaging
Blank = 7" Reel
(C-Spec)
7280 = 13" Reel
Blank
7" Reel
7610 ==Bag
7280
Reel
7005 == 13"
Moisture
7610
bags = Bag
7005 = Moisture
bags
Surge
4250=
25ºC
after Weibull
4250== 25ºC
4251
-55ºC
after85ºC
Weibull
and
after
4251 = -55ºC
Weibull
and 85ºC
after
4252
= -55ºC
Weibull
and
85ºC
4252 = Weibull
-55ºC
before
and 85ºC
TLVL
= Weibull
before Level
Weibull
Grade
TLVL
"T" = Weibull
Grade Level
"T"
T2061_T543 • 4/16/2015
C
Termination
CWR09
J
H
105Code (pF) Capacitance
K
C Level
Capacitor
Style
Voltage
Capacitance
Reliability
Finish
Tolerance
Termination
Capacitance
Capacitor
Style
Capacitance
Per MIL–PRF–
CVoltage
=4V
B = Gold
First two Code
digits (pF) Tolerance
J = ±5%
WeibullReliability Level
FinishPlated
55365/4
D=6V
C = Hot solder
K = ±10% A = non-ER
Per MIL–PRF–
C
4 VV
B
= Gold Plated
First two
digits
JM==±5%
F == 10
dipped
figures.
Third
digit
±20% Weibull
B = (0.1%/1,000 hours)
55365/4
D
C
solder
represent
significant
K = ±10% A
H == 615VV
H == Hot
Solder
specifies number
of
C == non-ER
(0.01%/1,000 hours)
F
=
10
V
dipped
fi
gures.
Third
digit
M
=
±20%
B
(0.1%/1,000 hours)
J = 20 V
Plated
zeros.
D ==(0.001%/1,000
hours)
H
15 V
V
H
Solder
specifies number of
C =T(0.01%/1,000
hours) hours)
T=
Level* (0.01%/1,000
K == 25
K == Solder
JM==20
Plated
zeros.
D =(0.001%/1,000 hours)
Exponential
35VV
fused
K
K = Solder
T==T(1.0%/1,000
Level* (0.01%/1,000
M
hours) hours)
N == 25
50 VV
M = 35 V
fused
Exponential
P = (0.1%/1,000 hours)
N = 50 V
M
(1.0%/1,000 hours)
R == (0.01%/1,000
hours)
P
(0.1%/1,000 hours)
S ==(0.001%/1,000
hours)
R = (0.01%/1,000 hours)
S =(0.001%/1,000 hours)
* When T Level is ordered, no Surge Current Option is needed
2
A
A Option
Surge Current
Surgeafter
Current
Option
A = +25°C
Weibull
B = -55°C +85°C after Weibull
A
after Weibull
C == +25°C
-55°C +85°C
before Weibull
B
= -55°C
Blank
= No+85°C
Surgeafter Weibull
C = -55°C +85°C before Weibull
Blank = No Surge
Item
Item
-55°C to 125°C
Rated
Capacitance
Range
Operating
Temperature
0.1
– 100
µF @ 120 Hz/25°C
-55°C
to 125°C
Capacitance
Tolerance
Rated
Capacitance
Range
J0.1Tolerance
K Tolerance
– 100 µF(5%),
@ 120
Hz/25°C (10%), M Tolerance (20%)
Rated Voltage
Range
Capacitance
Tolerance
4J Tolerance
– 50 V (5%), K Tolerance (10%), M Tolerance (20%)
DF (120 Hz)
109
Tantalum Capacitors
Surface Mount
T419
Series
MIL–PRF–55365/11
(CWR19
Style) (CWR Style)
Tantalum
Surface
Mount Capacitors
– MIL–PRF
MIL–PRF CWR Style
(cont.)
KEMET Ordering
Information
T419 Series MIL–PRF–55365/11
(CWR19
Style)
Information
Capacitance Range: 0.33 toKEMET
330 μF •Ordering
Temperature
T
419
A
Capacitor
Case
T
419
A
Series
Class
Size
Capacitor
Case
Series
T=
CWR19
A,
B,
Class
Size
Tantalum Established C, D,
T=
CWR19
A,
Reliability
E, B,
F,
Tantalum Established G,
C, D,
H,
Reliability E,XF,
G, H,
X
K
004
A
H
4251
7280
Capacitance
K
Tolerance
Capacitance
J = ±5%
Tolerance
K = ±10%
J = ±5%
M = ±20%
K = ±10%
M = ±20%
004
Voltage
A
Failure Rate/Design
H
Lead Material
4251
Surge
Failure Rate/Design
Weibull
A = non-ER
Weibull
B = (0.1%/1,000 hours)
A = non-ER
C = (0.01%/1,000 hours)
B = (0.1%/1,000 hours)
D = (0.001%/1,000 hours)
C = (0.01%/1,000 hours)
T = (0.01%/1,000 hours)
D = (0.001%/1,000 hours)
Exponential
T = (0.01%/1,000 hours)
M = (1.0%/1,000 hours)
Exponential
P = (0.1%/1,000 hours)
M = (1.0%/1,000 hours)
R = (0.01%/1,000 hours)
P = (0.1%/1,000 hours)
S =(0.001%/1,000 hours)
R = (0.01%/1,000 hours)
S =(0.001%/1,000 hours)
Material
CLead
= Hot
Solder
Dipped
C = Hot Solder
H = Standard
Dipped
Solder Coated
H = Standard
(SnPb 5% Pb
Solder Coated
minimum)
(SnPb 5% Pb
B = Gold Plated
minimum)
K = Solder
B = Gold Plated
Fused
K = Solder
Fused
Blank Surge
= No Surge
4250= 25ºC after
Blank = No Surge
Weibull
4250= 25ºC after
4251 = -55ºC and
Weibull
85ºC after Weibull
4251 = -55ºC and
4252 = -55ºC
85ºC after Weibull
and 85ºC before
4252 = -55ºC
Weibull
and 85ºC before
TLVL = Weibull
Weibull
Grade Level "T"
TLVL = Weibull
Grade Level "T"
Packaging
7280
(C-Spec)
Packaging
Blank
= 7" Reel
(C-Spec)
7280 = 13" Reel
Blank = 7" Reel
7610 = Bag
7280 = 13" Reel
7005 = Moisture
7610 = Bag
bags
7005 = Moisture
bags
Voltage
004
=4V
006 = 6.3 V
004 = 4 V
010 = 10 V
006 = 6.3 V
015 = 15 V
010 = 10 V
020 = 20 V
015 = 15 V
025 = 25 V
020 = 20 V
035 = 35 V
025 = 25 V
035 = 35 V
MIL–PRF–55365/11
CWR19
225
Capacitance
225
Code (pF)
Capacitance
First two
Code
(pF)
digits
First
two
represent
digits
signifi
cant
represent
figures.
Third
signifi
cantes
digit specifi
figures. Third
number of
digit specifies
zeros.
number of
zeros.
K
H
CWR19
Capacitor
Style
K
Voltage
H Finish
Termination
Capacitor
Style
Per MIL–PRF–
55365/11
Per MIL–PRF–
55365/11
Finish
CVoltage
= 4 V Termination
B = Gold Plated
D=6V
C = Hot solder
C == 10
4 VV dipped
B = Gold Plated
F
D == 15
6 VV H
C == Solder
Hot solder
H
Plated
10 VV K
dipped
JF == 20
= Solder fused
H == 25
15 V
V H = Solder Plated
K
J ==20
M
35VV K = Solder fused
K = 25 V
M = 35 V
225
K
225Code (pF) Capacitance
K
Capacitance
Tolerance
Capacitance
Capacitance
First two Code
digits (pF) JTolerance
= ±5%
K = ±10%
First
two
digits
J
=
M =±5%
±20%
represent
significant
K = ±10%
specifies number
of
figures.
Third
digit
M
=
±20%
zeros.
specifies number of
zeros.
C
D
A
C Level
Reliability
CaseDCode
A Option
Surge Current
Reliability Level
Weibull
A = non-ER
Weibull
B = (0.1%/1,000 hours)
A
C == non-ER
(0.01%/1,000 hours)
B
(0.1%/1,000 hours)
D ==(0.001%/1,000
hours)
C
hours)
T==T(0.01%/1,000
Level* (0.01%/1,000
D
=(0.001%/1,000 hours)
hours)
T=
T Level* (0.01%/1,000
Exponential
hours)
M = (1.0%/1,000 hours)
Exponential
P = (0.1%/1,000 hours)
M
(1.0%/1,000 hours)
R == (0.01%/1,000
hours)
P
(0.1%/1,000 hours)
S ==(0.001%/1,000
hours)
R = (0.01%/1,000 hours)
S =(0.001%/1,000 hours)
A,Case
B, C,Code
D, E,
F, G, H, X
A, B, C, D, E,
F, G, H, X
Surge
Current
A = +25°C
afterOption
Weibull
A == -55°C
+25°C +85°C
after after
B
Weibull
Weibull
B == -55°C
C
-55°C +85°C
+85°C after
Weibull
before Weibull
C == None
-55°C +85°C
Z
before Weibull
Z = None
Item
110
Item
-55°C to 125°C
Operating
Temperature
Rated
Capacitance
Range
-55°C– to
125°C
0.33
330
µF @ 120 Hz/25°C
Rated
Capacitance
Range
Capacitance
Tolerance
– 330 µF
@ 120
Hz/25°C(10%), M Tolerance (20%)
J0.33
Tolerance
(5%),
K Tolerance
Capacitance
Tolerance
Rated Voltage
Range
J4 Tolerance
Rated Voltage
Range
DF (120
Hz)
4 – 35toV Part Number Electrical Specification Table
Refer
DF(100
(120kHz)
Hz)
ESR
ESR (100
kHz)
Leakage
Current
Refer
Part
Number
Electrical
Table
≤
0.01toCV
(µA)
at rated
voltage Specifi
after 5 cation
minutes
Leakage Current
T2002_T419 • 4/16/2015
2
T2002_T419 • 4/16/2015
2
Tantalum Capacitors
Surface Mount
MIL–PRF CWR Style
(cont.)
T429 Series
MIL–PRF–55365/11 (CWR29 Style)
KEMET Ordering Information
Capacitance Range: 0.1 to KEMET
T
Capacitor
T
Class
Capacitor
T=
Class
Tantalum
T=
Tantalum
429
A
429
Series
Case
A
Size
Case
A, B,
Size
C, D,
A,
E, B,
F,
C, D,
G,
H,
E,XF,
G, H,
X
Series
CWR29
Established
CWR29
Reliability
Established
Reliability
225
K
004
Capacitance
Capacitance
225
K
004
Voltage
Code (pF)
Tolerance
Voltage
004
=4V
Code (pF)
Tolerance
represent
K = ±10% 006 = 6.3 V
First
two
digits
J
=
±5%
004
=
4 VV
significant
M = ±20% 010 = 10
represent
K = ±10% 006
6.3VV
figures.
Third
015 == 15
signifi
cantes M = ±20% 010
digit
specifi
020 == 10
20 VV
figures.
015
numberThird
of
025 == 15
25 VV
digitzeros.
specifies
020
035 == 20
35 V
V
number of
025
050 == 25
50 V
V
zeros.
035 = 35 V
050 = 50 V
A
H
A
Failure Rate/Design
H
Lead Material
Failure Rate/Design
Weibull
A = non-ER
Weibull
B = (0.1%/1,000 hours)
A
C == non-ER
(0.01%/1,000 hours)
B
(0.1%/1,000 hours)
D ==(0.001%/1,000
hours)
C
(0.01%/1,000 hours)
hours)
T == (0.01%/1,000
D
=(0.001%/1,000 hours)
Exponential
T
hours)
M == (0.01%/1,000
(1.0%/1,000 hours)
Exponential
P = (0.1%/1,000 hours)
M
(1.0%/1,000 hours)
R == (0.01%/1,000
hours)
P =(0.001%/1,000
= (0.1%/1,000 hours)
S
hours)
R = (0.01%/1,000 hours)
S =(0.001%/1,000 hours)
CLead
= HotMaterial
Solder
Dipped
C
=
Hot
Solder
H = Standard
Dipped
Solder Coated
H = Standard
(SnPb
5% Pb
Solder Coated
minimum)
(SnPb
5%Plated
Pb
B = Gold
minimum)
K = Solder
B
= Gold Plated
Fused
K = Solder
Fused
Ordering
Information – Defense MIL–PRF–55365/11
MIL–PRF–55365/11
CWR29
K
CWR29
Capacitor
Style
K
Voltage
H
Capacitor
Style
Per MIL–PRF–
55365/11
Per MIL–PRF–
55365/11
CVoltage
=4V
D=6V
C == 10
4 VV
F
D
H == 615VV
F
10 VV
J == 20
H
15 V
V
K == 25
J ==20
M
35VV
K == 25
N
50 VV
M = 35 V
N = 50 V
225
K
Capacitance
K
Tolerance
Capacitance
Termination
Finish Capacitance
B = Gold Plated
First two Code
digits (pF) J = ±5%
Tolerance
C = Hot solder
K = ±10%
B = Gold Plated
First two
digits
J ==±5%
dipped
figures.
Third
digit
M
±20%
C
solder
represent
significant
K = ±10%
H == Hot
Solder
Plated
specifies number
of
dipped
figures.
Third digit
M = ±20%
K = Solder fused
zeros.
H = Solder Plated
specifies number of
K = Solder fused
zeros.
H Finish Capacitance
225Code (pF)
Termination
4251
7280
4251
Surge
Packaging
7280
(C-Spec)
Packaging
Blank = 7"
(C-Spec)
Reel
Blank
7"
7280 ==13"
Reel
Reel
7280
13"
7610 == Bag
Reel
7005 =
7610
= Bag
Moisture
7005
bags =
Moisture
bags
BlankSurge
= No surge
4250= 25ºC after
Blank
=
Weibull No surge
4250=
4251 = 25ºC
-55ºCafter
and
Weibull
85ºC after Weibull
4251 == -55ºC
4252
-55ºC and
85ºC
afterbefore
Weibull
and 85ºC
4252
= -55ºC
Weibull
and
85ºC
before
TLVL=
Weibull
Weibull
Grade Level "T"
TLVL= Weibull
Grade Level "T"
C
D
A
C Level
Reliability
CaseDCode
A Option
Surge Current
Reliability Level
Weibull
A = non-ER
Weibull
B
= (0.1%/1,000 hours)
A
C == non-ER
(0.01%/1,000 hours)
B
(0.1%/1,000 hours)
D ==(0.001%/1,000
hours)
C
=
hours)
T = T(0.01%/1,000
Level* (0.01%/1,000
D =(0.001%/1,000 hours)
hours)
T = T Level* (0.01%/1,000
Exponential
hours)
M = (1.0%/1,000 hours)
Exponential
P = (0.1%/1,000 hours)
M
(1.0%/1,000 hours)
R == (0.01%/1,000
hours)
P
(0.1%/1,000 hours)
S ==(0.001%/1,000
hours)
R = (0.01%/1,000 hours)
S =(0.001%/1,000 hours)
Case
A, B,Code
C,
D, E, F, G,
A,H,B,XC,
D, E, F, G,
H, X
Surge
Current
A
= +25°C
afterOption
Weibull
A == -55°C
+25°C +85°C
after after
B
Weibull
Weibull
B
C == -55°C
-55°C +85°C
+85°C after
Weibull
before Weibull
C == None
-55°C +85°C
Z
before Weibull
Z = None
Item
Item
-55°C to 125°C
Rated
Capacitance
Range
Operating
Temperature
0.1
– 330
µF @ 120 Hz/25°C
-55°C
to 125°C
Capacitance
Tolerance
Rated
Capacitance
Range
J0.1Tolerance
K Tolerance
– 330 µF(5%),
@ 120
Hz/25°C (10%), M Tolerance (20%)
Rated Voltage
Range
Capacitance
Tolerance
4J Tolerance
DF (120
Hz)
Rated Voltage
Range
Refer
4 – 50toV Part Number Electrical Specification Table
ESR
DF(100
(120kHz)
Hz)
Leakage
Current
ESR (100
kHz)
≤
0.01toCV
(µA)
at rated
voltage Specifi
after 5 cation
minutes
Refer
Part
Number
Electrical
Table
Leakage Current
T2003_T429 • 4/16/2015
2
T2003_T429 • 4/16/2015
2
111
Tantalum Capacitors
Surface Mount
MIL–PRF CWR Style
(cont.)
T492
Series
MIL–PRF–55365/8
(CWR11 Style)
KEMET
KEMET Ordering Information
492
156 to +125°C
K
DRange: −55°C
Capacitance Range: 0.1 to 100 TμF • Temperature
Capacitor
T
Class
T=
Capacitor
Tantalum
Class
T=
Tantalum
Series
492
CWR11
Series
Established
Reliability
CWR11
Established
Reliability
A, B,
C, D
Capacitance
K
Tolerance
First
two digits
J = ±5%
Capacitance
Capacitance
represent
KTolerance
= ±10%
Code
(pF)
significant
M = ±20%
First two digits
J = ±5%
represent
K = ±10%
specifies number
significant
M = ±20%
of zeros.
specifies number
of zeros.
020
A
C
4251
Voltage
020
Failure Rate/Design
A
Lead Material
C
Surge (C-Spec)
004 = 4 V
Voltage
006 = 6.3 V
010 = 10 V
004 = 4 V
015 = 15 V
006 = 6.3 V
020 = 20 V
010 = 10 V
025 = 25 V
015 = 15 V
035 = 35 V
020 = 20 V
050 = 50 V
025 = 25 V
035 = 35 V
050 = 50 V
Weibull
Failure Rate/Design
A = non-ER
B = (0.1%/1,000 hours)
Weibull
C = (0.01%/1,000 hours)
A = non-ER
D = (0.001%/1,000 hours)
B = (0.1%/1,000 hours)
T = (0.01%/1,000 hours)
C = (0.01%/1,000 hours)
Exponential
D = (0.001%/1,000 hours)
M = (1.0%/1,000 hours)
T = (0.01%/1,000 hours)
P = (0.1%/1,000 hours)
Exponential
R = (0.01%/1,000 hours)
M = (1.0%/1,000 hours)
S =(0.001%/1,000 hours
P = (0.1%/1,000 hours)
R = (0.01%/1,000 hours)
S =(0.001%/1,000 hours
4251
C = Hot Solder Dipped
Lead Material
H = Standard Solder
Coated (SnPb 5% Pb
C = Hot Solder Dipped
minimum)
H = Standard Solder
B = Gold Plated
Coated (SnPb 5% Pb
K = Solder Fused
minimum)
B = Gold Plated
K = Solder Fused
4250= 25ºC after
Surge (C-Spec)
Weibull
4251 = -55ºC and 85ºC
4250= 25ºC after
after Weibull
Weibull
4252 = -55ºC and 85ºC
4251 = -55ºC and 85ºC
before Weibull
after Weibull
TLVL= Weibull Grade
4252 = -55ºC and 85ºC
Level "T"
before Weibull
TLVL= Weibull Grade
Level "T"
MIL–PRF–55365/8
Ordering
– Defense
CWR11Information
M
H MIL–PRF–55365/8
105
Voltage
CWR11
Fused
A, B,
Case
C,
D
Size
Capacitance
156(pF)
Code
Capacitor Style
Case
D
Size
M
Termination Finish
K
H
105
Capacitance
Tolerance
K
B
A
Reliability Level
Surge Current
Option
A
B
Per MIL–PRF–
C=4V
B = Gold Plated
J = ±5%
Weibull
ASurge
= +25°C
after
Capacitance
Current
Capacitor Style
Voltage
Termination Finish
Reliability Level
Weibull
55365/8
D=6V
KTolerance
= ±10%
A = non-ER
Option
Tantalum Surface MountF Capacitors
–HFused
= 10 V
= Solder Plated
M = ±20%
B = (0.1%/1,000 hours)
B = -55°C +85°C
Per MIL–PRF–
C=4V
B = Gold Plated
J = ±5%
Weibull
A = +25°C after
H2 = 15 V
K = Solder fused
zeros.
C = (0.01%/1,000 hours)
after Weibull
T496 Series
Fused
MnO
55365/8
D=6V
K = ±10%
A = non-ER
Weibull
J = 20 V
D =(0.001%/1,000 hours)
C = -55°C +85°C
F = 10 V
H = Solder Plated
M = ±20%
B = (0.1%/1,000 hours)
B = -55°C +85°C
K = 25 V
T= T Level* (0.01%/1,000 hours) before Weibull
H = 15 V
K = Solder fused
zeros.
C = (0.01%/1,000 hours)
after Weibull
M = 35 V
Exponential
Blank = None
SPICE
J = 20 V
D =(0.001%/1,000 hours)
C = -55°C +85°C
N = 50 V
M = (1.0%/1,000 hours)
K = 25 V
T= T Level* (0.01%/1,000 hours) before Weibull
P = (0.1%/1,000 hours)
M = of
35 specifi
V
Exponential
Blank = None
For a detailed analysis
c part numbers, please visit www.kemet.com for a free download
of KEMET's SPICE software.
R = (0.01%/1,000 hours)
= 50 V is freeware intended to aid design engineers in analyzing theMperformance
= (1.0%/1,000 hours)
The KEMET SPICENprogram
of
these
capacitors
over
S =(0.001%/1,000 hours
P = (0.1%/1,000 hours)
R = (0.01%/1,000 hours)
S =(0.001%/1,000 hours
T496 Series Fused MnO
2
Ordering
Information
Characteristics
Capacitance Range: 0.15 toPerformance
T
496Characteristics
227
Performance
Item X
M
010 Performance
A Characteristics
T
E500
Capacitor
Capacitance
Termination
Packaging
Series
Case
Size Temperature
ESR
Operating
125°C
Class
Code (pF) -55°C toTolerance
(VDC)
Design
Finish
(C-Spec)
Tantalum Surface MountItem
Capacitors – Automotive Grade
T=
Fail Safe Rated
B, C,Capacitance
D, X
First
two digits0.1 – 100
K = µF
±10%
004 = 4
A = N/A
T = 100%
E = ESR
Blank = 7"
Range
@ 120 Hz/25°C
T489 Series Automotive Grade
Low DCTemperature
Leakage MnO2 -55°C to 125°C
Operating
Tantalum
represent
M = ±20%
006 = 6.3
Matte Tin (Sn)
Last three
Reel
significant J Tolerance (5%), K Tolerance
010 = 10(10%), M Tolerance (20%) plated
digits specify 7280 = 13"
Rated Capacitance
Range
0.1 – 100 µF @ 120 Hz/25°C
figures.
Third digit
016 = 16
H = Standard
ESR in mΩ
Reel
SPICE
Rated Voltage Range
4 – 50 V
es number
020 = 20(10%), M Tolerance (20%) solder coated
(500 = 500
Capacitance specifi
Tolerance
J Tolerance (5%), K Tolerance
of Hz)
zeros. Refer to Part Number Electrical
025 = 25Specification Table
(SnPb 5% Pb
mΩ)
DF (120
For a detailed analysis ofRated
specifi
c partRange
numbers,4 please
for a free download
of KEMET's SPICE software. The
Voltage
– 50 V visit www.kemet.com
035 = 35
minimum)
ESR (100
kHz) toRefer
to Part Number
Electrical
Specification
050 in
= 50
KEMET SPICE program is freeware
intended
aid design
engineers
analyzing
theTable
performance of these capacitors over frequenDF (120 Hz)
cy, temperature, ripple, and DC
bias Current
conditions.≤ 0.01 CV (µA) at rated voltage after 5 minutes
Leakage
ESR (100 kHz)
Automotive Grade
Leakage Current
© KEMET
Electronics
Corporation
• P.O. Box 5928
Grade
LowCharacteristics
DC Leakage
MnO
2
Performance
T
Capacitor
Class
T=
Tantalum
489 Item B
156
16
Performance
Characteristics
A
T
Operating
-55°C to 125°C
Case Temperature
Failure Rate/
Voltage
Lead Material
Code
(pF)
Tolerance
Rated Size
Capacitance
Range
0.15
– 477 µF at 120 Hz/25°C Design
Low DC
A, B, First two digits K = ±10%
006 = 6.3 V A = N/A
T = 100% matte tin
Tolerance MK=Tolerance
(20%)
Leakage Capacitance
C, D,
represent
±20% (10%),
010 = M
10Tolerance
V
(Sn) plated
Series
X Voltage
signifi
cant
016 = 16 V
H = Standard solder
Rated
Range
4 – 50 V
figures. Third
020 = 20 V
coated (SnPb 5% Pb
DF (120
Hz)es Refer to Part Number
Specification Table
digit
specifi
025 = 25Electrical
V
minimum)
number of
035 = 35 V
G = Gold plated
ESR (100
kHz)
Specification Table
zeros.
050 = 50Electrical
V
Series
Leakage Current
112
M
T2006_T492 • 4/16/2015
2
T2006_T492 • 4/16/2015
2
A800
C-Spec
Packaging
(C-Spec)
A = Automotive Blank = 7" Reel
grade
7280 = 13" Reel
800 = ESR value
(800 = 800 mΩ)
T491 Series Automotive/Industrial Grade MnO2
SPICE
Tantalum Capacitors
Surface Mount
Automotive Grade (cont.)
T
491
X
157
K
Capacitor
Capacitance
Series
Case Size
Class
Code (pF)
Tantalum
Mount Capacitors
T = Surface
Industrial
A, B, C, –D,Automotive
First twoGrade
digits
Tantalum
E, S, T,
U, Lowrepresent
T494
Series Automotive/Industrial
Grade
ESR MnO2
V, X
significant
figures. Third
digit specifies
SPICE
number of
zeros.
020
T
AUTO
Termination Finish
C-Spec 1
A
Tolerance
(VDC)
Design
Packaging
(C-Spec)
K = ±10%
M = ±20%
2R5 = 2.5
A = N/A
T = 100% Matte Tin
AUTO =
Blank = 7"
003 = 3
(Sn) plated*
Automotive
Reel
004 = 4
H = Standard solder
Grade
7280 = 13"
006 = 6.3
coated (SnPb 5% Pb
(AUTO =
Reel
010 = 10
minimum)
AEC–Q200
016 = 16
G = Gold plated (A, B, Certification)
020 = 20
C, D, X only)
for
a
free
download
of KEMET's SPICE software.
025 = 25
N = Non-magnetic
The KEMET SPICE program is freeware intended to aid design 035
engineers
in analyzing the100%
performance
= 35
Tin (Sn) of these capacitors over
050 = 50
M = Non-magnetic
(SnPb)
Capacitance Range: 0.1 to 1,000 μF • Temperature Range: −55°C to +125°C
T
494
T
Item
Series
Case Size
336
M
004
A
T
AUTO
Capacitance
Failure Rate/ Characteristics
Performance
Termination Finish
C-Spec 1 Packaging (C-Spec)
Code (pF)
Tolerance
(VDC)
Design
-55°C to 125°C
T
=
Industrial
A,
B,
C,
First
two
digits
K
=
±10%
2R5
=
2.5
A
=
N/A
T
=
100%
Matte
AUTO
=
Blank = 7" Reel
Tantalum Surface Mount Capacitors – Automotive Grade
Tantalum
- Low Rated
D, E,Capacitance
S, T, represent
significant
M =µF
±20%
003 = 3
Tin (Sn) plated
Automotive
7280 = 13" Reel
Range
0.1
–
470
at
120
Hz/25°C
T495 Series Automotive Grade Surge Robust Low ESR MnO2
ESR
U, V, X
004 = 4
H = Standard
Grade
Capacitancespecifi
Tolerance
Tolerance
solder coated
(AUTO =
es numberKofTolerance (10%), M006
= 6.3 (20%)
zeros.
010 = 10
(SnPb 5% Pb
AEC–Q200
Applications
Rated Voltage Range
6.3 – 50 V
016 = 16
minimum)
Certification)
= 20 Specification TableG = Gold plated
DF (120 Hz)
Electrical
Typical applications include decoupling and filtering in automotive025
end= 25
applications, such as
(A,DC/DC
B, C, D, Xconverters, portable electronics,
ESR
(100requiring
kHz)
Refer
Part Number
Electrical
telecommunications, and control
units
high toripple
current035
capability.
= 35 Specification Tableonly)
050 = 50
Leakage Current
Capacitor
Class
Grade Surge Robust MnO2
Capacitance Range: 0.1 to 1,000 μF • Temperature Range: −55°C to +125°C
T
495
X
Item
M
107
A
010
T
A080
Performance
Characteristics
Capacitor
Capacitance
Capacitance Rated Voltage Failure
Rate/
Packaging
Series Case Size
Termination Finish
ESR
Class
Code (pF)
Tolerance
(VDC)
Design
(C-Spec)
Operating
Temperature
-55°C
to
125°C
A = AUTO grade Blank = 7" Reel
T=
Surge
A, B, C,
First two digits
K = ±10%
2R5 = 2.5
A = N/A
T = 100% Matte Tin
T498
Series Automotive
Rated
Capacitance
Range
0.1M –=1,000
120= Hz/25°C
product
7280 = 13" Reel
Tantalum
Robust Grade
D, E,MnO
T, 2 150°C
represent
±20%µF at004
4
(Sn) plated
080 = Maximum
Low ESR
V, X
significant
006 = 6.3
H = Standard solder
ESR in mΩ
figures. Third
010 = 10
coated (SnPb 5% Pb
SPICE
at room
digit specifi
016 = 16
minimum)
Rated Voltage
Rangees 2.5 – 50 V
number of zeros.
020 = 20
G = Gold plated (A, B, temperature (80
Box
5928
29606
(864)
• www.kemet.com
T2050_T491_AUTO
• 4/16/2015
(120
Hz)• Greenville,
Refer
toSC
Part
Number
Specifi
Table
mΩ) SPICE software.
025
= Electrical
25963-6300
C,
D,
X only) of KEMET's
For
a detailed analysis of specific part
numbers,
please
visit
www.kemet.com
forcation
a free
download
The 2
035 = 35
= Non-magnetic
ESR (100
kHz) toRefer
to Part Number
Electrical
Specification
intended
aid design
engineers
in analyzing
theNTable
performance
of these capacitors over frequen050 = 50
100% Tin (Sn)
cy, temperature, ripple, and DC
bias Current
conditions.≤ 0.01 CV (µA) at rated voltage after 5 minutes
M = Non-magnetic
Leakage
(SnPb)
Grade Information
MnO2 150ºC
Ordering
T
498
X
227
M
010
A
T
E500
Capacitor
Class
Case
Capacitance
Failure Rate/
Packaging
Item
Performance
Characteristics
Series
Termination Finish
ESR
Size
Code (pF)
Tolerance
(VDC)
Design
(C-Spec)
-55°C to 125°C
T=
High
A, B, C, D, X First two digits K = ±10%
006 = 6.3
A = N/A
T = 100% Matte
E = ESR
Blank = 7"
Tantalum
Temperature
= ±20%
010 = 10
Tin (Sn) plated*
Last three
Reel
Rated Capacitance Rangerepresent
0.47 – 680MµF
at 120 Hz/25°C
150ºC
significant
015 = 15
G = Gold plated digits specify 7280 = 13"
Tolerance (10%), M Tolerance
(20%)
figures.KThird
020 = 20
H = Standard
ESR in mΩ
Reel
digit specifies
025 = 25
solder coated
(500 = 500
Rated Voltage Range
6.3 – 50 V
number of
035 = 35
(SnPb 5% Pb
mΩ)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville,
SC 29606 (864) 963-6300
• www.kemet.com
2
050 = 50
minimum) T2051_T494_AUTO • 4/16/2015
DF (120 Hz) zeros.
Specification Table
ESR (100 kHz)
Leakage Current
113
T499 Series Automotive Grade MnO2 175°C
Tantalum Capacitors
SPICE
Surface Mount
Automotive Grade (cont.)
Grade MnO2 175ºC
T Surface Mount
499 Capacitors
X – Automotive
227Grade
M
Tantalum
Capacitor
Case
Capacitance
Capacitance
T510 Series Automotive Grade Multiple Anode Low ESR MnO2
Series
Class
Size
Code (pF)
Tolerance
T=
SPICE
Tantalum
High
Temperature
175ºC
010
A
T
E500
Rated Voltage
(VDC)
Failure Rate/
Design
Termination
Finish
ESR
Packaging
(C-Spec)
A, B,
C, D,
X
First two digits
K = ±10%
006 = 6.3
A = N/A
T = 100% Matte E = ESR Last Blank = 7"
represent
M = ±20%
010 = 10
Tin (Sn) plated
three digits
Reel
significant
015 = 15
G = Gold plated specify ESR
7280 = 13"
For a detailed analysis of specificfipart
for a free download
of KEMET's
SPICE
gures.numbers,
Third digit please visit www.kemet.com
020 = 20
H = Standard
in mΩ
(500 software.
=
Reel
specifies intended
number to aid design 025
= 25 in analyzing the performance
solder coated of these
500capacitors
mΩ)
The KEMET SPICE program is freeware
engineers
over
of zeros.
035 = 35
(SnPb 5% Pb
frequency, temperature, ripple, and DC
bias conditions.
050 = 50
minimum)
KEMET Organic Capacitor (KO-CAP) – Automotive Grade
T591 Series High Performance Automotive Grade Polymer Tantalum 105°C/125°C
T510 Series Automotive Grade Multiple Anode MnO2
μF • Temperature
Environmental
Compliance
T
510
477
M
006
A
T
X
Item
Performance
Characteristics A030
RoHS Compliant (6/6)
according to Directive 2002/95/EC when ordered with
100% Sn solder.
Capacitor
Class
Failure Rate/
Packaging
Operating
-55°C to 175°C Voltage
Case
Size Temperature
Lead Material
ESR
Code (pF)
Tolerance
Design
(C-Spec)
Range
– 220 μF at004
120=Hz/25°C
T=
Multiple RatedE,Capacitance
X
First two
digits 0.15
K = ±10%
4V
A = N/A
T = 100% Matte Tin A = AUTO grade
Blank = 7" Reel
Tantalum
Anode
represent
= ±20% (10%),
006 M
= 6.3
V
(Sn) Plated*
product
7280 = 13" Reel
KMTolerance
Tolerance
(20%)
SPICE
Low ESR
significant
010 = 10 V
H = Standard Solder 030 = Maximum
figures.
Third 6 – 50 V
015 = 15 V
Coated (SnPb 5%
ESR in mΩ at
Rated Voltage
Range
For a detailed analysis of specificdigit
partspecifi
numbers,
please visit 020
www.kemet.com
for a free
download of KEMET's
SPICE software.
Pb minimum)
es
= 20 V
room temperature
DF(120
Hz)
Refer
to
Part
Number
Electrical
Specifi
cation
Table
G =the
Goldperformance
Plated (A, (30mΩ)
number intended
of
025 =engineers
25 V
The KEMET SPICE program is freeware
to aid design
in analyzing
zeros.
035 = 35
V
C, D, X only)
kHz)
Electrical
SpecificationB,Table
frequency, temperature, ripple,ESR
and(100
DC
bias conditions.
050 = 50 V
Leakage Current
Series
T591 Series High Performance Automotive Grade Polymer Tantalum 105°C & 125°C
Ordering
Information
μF • Temperature
Range: −55°C to +105°C & −55°C to +125°C
T
591
D
107
M
Tantalum
Surface MountItem
Capacitors – Space Grade
Capacitor
Capacitance
Series
Case Size
(CWR11Tolerance
Style)
T493Class
Series Space Grade Commercial
-55°CMnO
to 125°C
2
010
A
T
Performance
Characteristics
Rated Voltage
Failure Rate/
Termination
(VDC)
Design
Finish
E025
ESR
T=
591 =
B, D, V
First two digits
M = ±20%
2R5 = 2.5
A = N/A
T = 100% Tin Maximum ESR
10 – 1,000 µF @ 120 Hz/25°C
Automotive
006 = 6.3
(Sn)
in mΩ,
Grade Capacitance Tolerance
figures.KThird
digit (10%), M Tolerance (20%)
010 = 10
025 = 25 mΩ
Tolerance
Polymer
specifies number of
Voltage
4 please
– 50 V visit www.kemet.com for a free download of KEMET's SPICE software. The
For a detailed analysis ofRated
specifi
c partRange
numbers,
zeros.
Tantalum
SPICE
Space Grade
intended
aid design
engineers
in analyzing
theTable
performance of these capacitors over frequency,
DF (120
Hz) toRefer
to Part Number
Electrical
Specification
temperature, ripple, and DC bias
conditions.
ESR (100 kHz)
Leakage Current
Performance
Characteristics
©
KEMET
Electronics
Corporation
T493 Series Space Grade
(COTS)
MnO
2 (CWR11 Style)
Ordering
Information
μF • Temperature
T
493
Item
DOperating Temperature
227
Capacitor
Class
K to 105°C
006
-55°C
/ 125°C
C
H
61
Case
Capacitance
Failure Rate/
Rated Capacitance
Range Capacitance
33 – 220 µFVoltage
at 120 Hz/25°C
Series
Lead Material
Size
Code (pF)
Tolerance
Design
M Tolerance (20%)
C=
C = Hot Solder
T=
CRW11 A, B,
004 = 4 V
Tantalum
Style
C, D,Rated Voltage
represent
Range K = ±10%
2.5 – 10 V 006 = 6.3 V .01%/1,000 Dipped
010 = 10 V
hours
H = Standard
Space
X
significant
M = ±20%
DF Third
(120 Hz)
Refer to Part
016Number
= 16 V Electrical Specification
SolderTable
Coated
Grade
figures.
020 = 20 V
(SnPb 5% Pb
digit specifies
ESR (100 kHz)
025 = 25 V
minimum)
number of
035 at
= 35
V voltage after 5 minutes
B = Gold Plated
zeros.Current
Leakage
≤ 0.1 CV (µA)
rated
050 = 50 V
K = Solder
Fused
T = 100% Tin
114
T2054_T499_AUTO • 4/16/2015
Surge
2
A
ESR
Testing
2
61 = None
1 = ESR - A = Option A
62 = 10 Cycles
Standard B = Option B
after Weibull,25°C 2 = ESR - C = Option C
63 = 10 Cycles,
Low
after Weibull,-55°C
and 85°C
64 = 10 Cycles
before Weibull,
-55°C and 85°C
T2055_T510_AUTO • 4/16/2015
2
65 = 10 Cycles
Before and After
Weibull, -55°C and
85°C
Tantalum Surface Mount Capacitors – Space Grade
T496 Series Space Grade Fail-Safe Fused MnO2
SPICE
Tantalum Capacitors
Surface Mount
Space Grade (cont.)
T496 Series Space Grade Fail-Safe Fused MnO2
T
Capacitor
Class
496
X
227
M
Series
Case
Size
Capacitance
Code (pF)
Capacitance
Tolerance
010
C
T
61
2
A
Voltage
Failure Rate/
Design
Lead Material
Surge
ESR
Testing
61 = None
62 = 10 Cycles
63 = 10 Cycles,
Low
after Weibull,55°C and 85°C
64 = 10 Cycles
before Weibull,
-55°C and 85°C
65 = 10 Cycles
For a detailed analysis of specific part numbers, please visit www.kemet.com for a free downloadBefore
of KEMET's
and AfterSPICE software. The
Weibull,
-55°Ccapacitors over frequency,
KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance
of these
and 85°C
temperature, ripple, and DC bias conditions.
T=
Tantalum
Fail
B, C, First two digits K = ±10%
004 = 4 V
C=
Safe D, X
represent
M = ±20% 006 = 6.3 V 0.01%/1,000
Space
significant
010 = 10 V
hours
Grade
Third
016 = 16 V
Tantalum Surface
Mount Capacitorsfigures.
– Space
Grade
digit Off-The-Shelf
specifies
= 20 V
(CWR09/19/29
Style)
T497 Series Space Grade Commercial
(COTS) MnO020
2
number of
025
= 25 V
zeros.
035 = 35 V
050 = 50 V
SPICE
C = Hot Solder
Dipped
T = 100% Matte
Tin (Sn) Plated
H = Standard
Solder Coated
(SnPb 5% Pb
minimum)
T497 Series Space Grade (COTS) MnO2 (CWR09/19/29 Style)
Ordering
Information
Performance
Characteristics
μF • Temperature
T
497
Item
G
226
K
020
C Performance
H Characteristics
61
Capacitor
Class
Case
Capacitance
Failure Rate/
Operating
TemperatureCapacitance
-55°C to 125°C
Series
Voltage
Lead Material
Size
Code (pF)
Tolerance
Design
0.15 – 470 µF @ 120 Hz/25°C
T=
High
A, B,
First two
K = ±10% 004 = 4 V
C=
C = Hot Solder
Tolerance M = ±20%
K Tolerance
(20%) Dipped
Tantalum Grade
C, Capacitance
D,
digits
006 (10%),
= 6.3 VM Tolerance
0.01%/1,000
- Space E, F,
represent
010 = 10 V
hours
T = 100% Matte
Voltage
Range
4 – 50 V 015 = 15 V
Grade
H,Rated signifi
cant
Tin (Sn) Plated
Tantalum Surface
Mount G,
Capacitors
– Space
Grade
X
020 =Number
20 V Electrical Specification
H = Standard
fiAnode
gures.
Third
DF Low
(120ESR
Hz) MnORefer
to Part
Table
T510 Series Space Grade Multiple
2
digit specifies
025 = 25 V
Solder Coated
ESR (100
Refer to Part
number
of kHz)
035 =Number
35 V Electrical Specification
(SnPbTable
5% Pb
zeros.
050 = 50 V
minimum)
SPICE
Leakage Current
B = Gold Plated
Surge
2
A
ESR
Testing
61 = None
62 = 10 Cycles
Low
63 = 10 Cycles,
after Weibull,-55°C
and 85°C
64 = 10 Cycles
before Weibull,
-55°C and 85°C
65 = 10 Cycles
For a detailed analysis of specific part numbers, please visit www.kemet.com for a free download
of KEMET's
Before
and After SPICE software.
Weibull, -55°C
and capacitors over
The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance
of these
85°C
T510 Series Space Grade Multiple Anode MnO2
Ordering
Information
Performance
Characteristics
μF • Temperature
T
510
Item
X
477
M
006
C Performance
T Characteristics
61
Capacitor
Case
Capacitance
Failure Rate/
Operating
TemperatureCapacitance
-55°C to 125°C
Series
Voltage
Lead Material
Class
Size
Code (pF)
Tolerance
Design
0.1 – 150 µF @ 120 Hz/25°C
C = Hot Solder
T=
Ultra
E, X First two digits K = ±10% 004 = 4 V
C=
Capacitance
Tolerance M = ±20%
K Tolerance
(20%) Dipped
Tantalum
Low
represent
006 (10%),
= 6.3 VM Tolerance
0.01%/1,000
T = 100%
ESR significant
010 = 10 V hours
Rated
Voltage
Range
4 – 50 V
Matte Tin (Sn)
Space
figures.
Third
PlatedTable
Grade
digit specifi
es Hz)
DF (120
H = Standard
number of
ESR
(100 kHz)
SolderTable
Coated
zeros.
(SnPb 5% Pb
Leakage Current
≤ 0.01CV (µA) at rated voltage after 5 minutes
minimum)
1
A
T2026_T496_SPACE • 4/16/2015
Surge
ESR
Testing
2
61 = None
62 = 10 Cycles after Standard B = Option B
Weibull,25°C
C = Option C
63 = 10 Cycles, after
Weibull,-55°C and
85°C
64 = 10 Cycles
before Weibull,
-55°C and 85°C
65 = 10 Cycles
Before and After
Weibull, -55°C and
85°C
Item
-55°C to 125°C
330 – 1,000 µF @ 120 Hz/25°C
1152
T2027_T497_SPACE • 4/16/2015
Tantalum Capacitors
Through-Hole
Tantalum Through-Hole Capacitors – Hermetically Sealed
T110 Series Axial MIL–PRF–39003 Polar Type and T212 (CSR13 Style)
T110 Series Axial MIL–PRF–39003 Polar Type and T212 (CSR13 Style)
Hermetically Sealed
Axial
Ordering
Information
T110
T110 Series
Axial
MIL–PRF–39003 –
Polar
Type and T212 (CSR13 Style)
Ordering Information – T110
T110 Series MIL–PRF–39003
Polar110Type &AT212 (CSR13
Style)K
T
105
T110 105
Capacitance Range: 0.0047Ordering
to
330
• Temperature
−55°C
T μF Information
110
A –Range:
K
Capacitor
Case
Capacitance
Codeto +125°C
Capacitance
Capacitor
Class
Class
TT=
T=
Capacitor
Tantalum
Tantalum
Class
T=
Tantalum
MIL
product
T212
(CSR13
A,
Case
C, B,
D
C,
D
Size
A, B,
C, D
T=
Tantalum
Capacitor
Tantalum
Class
T=
Tantalum
212
212
Series
Series
212
Hermetically
Hermetically
Sealed
Axial
Series
Sealed
Axial
Military
grade
Military
grade
capacitor
Hermetically
capacitor
Sealed Axial
Military grade
capacitor
A
A
Case
Case
Size
Size
AB,
A,
A,
C, B,
D
Case
C,
D
Size
A, B,
C, D
105
105 Code
Capacitance
Capacitance
(pF) Code
(pF)digits
First 105
two
First twosignifi
digits
represent
cant
Capacitance
Code
represent
signifidigit
cant
figures.(pF)
Third
figures.
Third
digit
specifi
number
Firstestwo
digits of
specifies
number of
zeros.
represent
significant
zeros.
specifies number of
zeros.
K
050
B
K
B
Capacitance
Rated050
Voltage Failure Rate/Military
Capacitance
Voltage Failure
Rate/Military
Tolerance Rated
(VDC)
Product
Only
Product
K
050
B Only
JTolerance
= ±5%
006(VDC)
=6
Graded:
J == ±5%
006 = Voltage
6
Graded:
K
±10%
010
10
B
= 0.1%/k
hours
Capacitance
Rated
Failure
Rate/Military
KTolerance
== ±10%
010(VDC)
10
B = Product
0.1%/k
M
±20%
015
= 15
C
0.01%/khours
hours
Only
M = ±20%
015 = 15
C = 0.001%/k
0.01%/k hours
020
D
hours
J = ±5%
006
= 20
6
Graded:
020 = 20
D = 1.0
0.001%/k
hours
035
35
G=
%/k hours
hours
K = ±10%
010
= 10
B
= 0.1%/k
035
35
G=
1.0 %/k hours
050 == 15
50
Exponential:
M = ±20%
015
C
= 0.01%/k hours
050
50
Exponential:
075 == 75
M == 0.001%/k
1%/k hours
020
20
D
hours
075 = 75
M == 0.1%/k
1%/k hours
100
100
P
035 = 35
G=
1.0 %/k hours
hours
100 = 100
P = 0.1%/k
R
0.01%/khours
hours
050 = 50
Exponential:
R = 0.001%/k
0.01%/k hours
S
hours
075 = 75
M
= 1%/k hours
S = 0.001%/k hours
100 = 100
P = 0.1%/k hours
R = 0.01%/k hours
S = 0.001%/k hours
TS=
= Standard
100% Tin
Termination
S=(Sn/Pb)
Standard
Finish
T = (Sn/Pb)
100% Tin
S= Standard
(Sn/Pb)
7200
7200
Specification
Specification
7200
All capacitors
are sleeved
All
capacitors
are sleeved
unless specified.
Specification
unless= specifi
ed.sleeve
0100
Without
0100
= Without
sleeve
7200
Tape &are
Reel
All
capacitors
sleeved
7200 &
= specifi
Tape
Reel
7293
7443 &
=ed.
Ammo
unless
7293 =& Without
7443 = Ammo
0100
sleeve
7200 = Tape & Reel
7293 & 7443 = Ammo
S
S
Termination
Termination
Finish
S
S = Finish
Standard
STermination
=(Sn/Pb)
Standard
(Sn/Pb)
Finish
S = Standard
(Sn/Pb)
7200
7200
Specification
Specification
7200
All capacitors
are sleeved
All capacitors
are sleeved
unless
specified.
Specifi
cation
unless= specifi
ed.sleeve
0100
Without
0100 = Without
sleeve
7200
Tape &are
Reel
All
capacitors
sleeved
7200 &
= Tape
Reel
7293
7443 &
=ed.
Ammo
unless
specifi
7293
&
7443
=
Ammo
4250 == Without
"A" surgesleeve
current
0100
4250
"A" surge current
4251 == "B"
7200
Tape & Reel
4251 = "B"
surge current
4252
7293
& "C"
7443 = Ammo
4252 = "C" surge current
4250 = "A" surge current
4251 = "B" surge current
Ordering Information – MIL–PRF–39003
MIL–PRF–39003
M39003
/01
6003
Ordering
M39003 Information
/01 – MIL–PRF–39003
6003
T
T
Termination
Termination
Finish
T Tin
T = Finish
100%
Style)
Ordering Information – T212 (CSR13 Style)
Capacitor
Capacitor
Class
Class
TT=
Sealed Axial
capacitor
Case
Size
Size
AB,
A,
A
Ordering Information –
Ordering
MIL product Information – T212 (CSR13 Style)
T
MIL product
T
Series
Series
110
Hermetically
Hermetically
Sealed Axial
Series
Sealed
Axial
capacitor
capacitor
Hermetically
050
A
Rated050
Capacitance
Voltage Failure
Rate/Military
(pF) Code Capacitance
Tolerance Rated
(VDC)
Product
Only
(pF)digits
Product
Only
K
050
First 105
two
JTolerance
= ±5%
006(VDC)
=6
A =AN/A
First twosignifi
digits
JK == ±5%
006
6
= N/A
Capacitance
Code
Rated
FailureARate/Military
represent
cant Capacitance
±10%
010 =Voltage
10
represent
signifidigit
cant M
KTolerance
== ±10%
010(VDC)
10
Product Only
figures.(pF)
Third
±20%
015
= 15
figures.
Third
digitof JM==±5%
±20%
015 == 15
specifi
number
020
20
Firstestwo
digits
006
6
A = N/A
specifies
number
of K = ±10%
020 == 10
20
zeros.
035
35
represent
significant
010
zeros.
035 == 15
35
050
50
figures.
Third digit
M = ±20%
015
050 == 20
50
060
60
specifies number of
020
060
60
075 == 75
zeros.
035
35
075 == 75
100
100
050
50
100 == 125
100
125
060
60
125 == 125
075
75
100 = 100
125 = 125
T212 (CSR13 Style)
A
A
Capacitor Class
Slash
Dash Number
Surge Option
Capacitor Class
Slash
Dash Number
Surge Option
M39003
/01
6003
A
Military
Specification
Failure Rate
A = C-4250
Military
SpecifiNumber
cation
Failure
A = C-4251
C-4250
Specifi
cation
Sheet
LevelRate
B
Capacitor
Class
Slash
DashLevel
Number
Option
Specifi
cation
Sheet
Number
BSurge
= C-4251
Number
C
C-4252
Number
C = C-4252
Blank
- No surge
Military
Specification
Failure Rate
A = C-4250
Blank - No surge
Specification
Sheet Number
Level
B = C-4251
Orders should be entered by the military specification number, including the dash number and surge option letter (A, B or C).
Number
C = C-4252
Orders should be entered by the military specification number, including
the dash number and surge option letter (A, B or C).
Blank - No surge
116
T2031_T110_AXIAL_T212 • 4/16/2015
T2031_T110_AXIAL_T212 • 4/16/2015
2
2
T2031_T110_AXIAL_T212 • 4/16/2015
2
Tantalum Capacitors
Through-Hole
Tantalum
Through-Hole
Capacitors Non-Polar
– Hermetically
T111
Series
Axial MIL–PRF–39003
and Sealed
T213 (CSR91 Style)
T111 Series Axial MIL–PRF–39003 Non-Polar and T213 (CSR91 Style)
Ordering
Information
T111 and T213 (CSR91 Style)
Hermetically Sealed
Axial
(cont.)–Non-Polar
T111 Series
& AT213 (CSR91
T Non-Polar
111
105 Style)
K
T111
to 160
• Temperature
−55°C
T μF Information
111
A –Range:
105
K
Capacitor
Case
Capacitance
Codeto +125°C
Capacitance
Series
Series
Hermetically
111
Sealed
Axial
Hermetically
Series
capacitor
Sealed
Axial
capacitor
Hermetically
Sealed Axial
capacitor
Class
Capacitor
Class
TT=
Tantalum
T=
Capacitor
Tantalum
Class
T=
Tantalum
A, B,
C, D
(pF) Code
Capacitance
(pF)digits
First 105
two
represent
cant
First twosignifi
digits
Capacitance
Code
figures.(pF)
Third
represent
signifidigit
cant
specifi
esThird
number
figures.
digitof
Firstzeros.
two digits
specifies number of
zeros.
specifies number of
zeros.
MIL
product
T213
(CSR91
Style)
Ordering
Information
(CSR91 Style)
T
213
A – T213 115
K
Class
Capacitor
Class
TT=
Tantalum
T=
Capacitor
Tantalum
Class
T=
Tantalum
213
Series
Series
Hermetically
213
Sealed
Axial
Hermetically
Series
Military
grade
Sealed
Axial
capacitor
Military
grade
Hermetically
capacitor
Sealed Axial
Military grade
capacitor
A
Case
Size
Case
Size
A,
AB,
C,
D
A,
B,
Case
C,
D
Size
A, B,
C, D
020
115 Code
Capacitance
(pF) Code
Capacitance
(pF)digits
First two
115
represent
signifi
cant
First
two
digits
Capacitance
Code
figures.(pF)
Third
represent
signifidigit
cant
specifi
esThird
number
figures.
digitof
Firstzeros.
two digits
specifies number of
zeros.
specifies number of
zeros.
B
K
B
Capacitance
Rated020
Tolerance Rated
(VDC)
Product
Only
Capacitance
Voltage Failure
Rate/Military
Product
KTolerance
= ±10%
006(VDC)
=6
Graded:
K
020
B Only
M == ±10%
±20% Rated
010
10
B
= 0.1%/k
hours
K
006 = Voltage
6
Graded:
Capacitance
Failure
Rate/Military
015
= 15
C
0.01%/kOnly
hours
MTolerance
= ±20%
010(VDC)
10
B =Product
0.1%/k
hours
020
20
D
hours
015 = 15
C = 0.001%/k
0.01%/k hours
K = ±10%
006
=
6
Graded:
035
35
G=
%/k hours
020 = 20
D = 1.0
0.001%/k
hours
M = ±20%
010 == 10
B = 0.1%/k hours
050
50
Exponential:
035 35
G= 1.0 %/k hours
015 == 15
C == 0.01%/k
hours
075
M
1%/k hours
050 75
50
Exponential:
020
= 100
20
D
= 0.001%/k
hours
100
P
hours
075 = 75
M == 0.1%/k
1%/k hours
035 = 35
G=
1.0
%/k hours
R
0.01%/k
hours
100 = 100
P = 0.1%/k
hours
050 = 50
Exponential:
S
hours
R = 0.001%/k
0.01%/k hours
075 = 75
M = 1%/k hours
S = 0.001%/k hours
100 = 100
P = 0.1%/k hours
R = 0.01%/k hours
MIL–PRF–39003
S = 0.001%/k hours
S
S
Termination
Finish
Termination
S= Finish
Standard
S
(Sn/Pb)
S=
Standard
Termination
(Sn/Pb)
Finish
Specification
Specification
All capacitors are sleeved
unless
specifi
ed.
All capacitors
are sleeved
Specifi
cationed.
unless
specifi
S= Standard
(Sn/Pb)
unless specified.
S
7200
7200
S
Termination
Finish
Termination
S = Finish
Standard
S
STermination
=(Sn/Pb)
Standard
(Sn/Pb)
Finish
S = Standard
(Sn/Pb)
Specification
Specification
All capacitors
are sleeved
7200
unless
specified.
All capacitors
are sleeved
cation
0100
Without
unless=Specifi
specifi
ed.sleeve
7200
Tape & Reel
0100 = Without
sleeve
All
capacitors
sleeved
7293
7443 &
=are
Ammo
7200 &
= Tape
Reel
unless= specifi
ed. current
4250
"A"
surge
7293 & 7443 = Ammo
0100 == "B"
Without sleeve
4251
4250 "A" surge current
7200
= "C"
Tape & Reel
4252
4251 = "B"
surge current
7293 & 7443 = Ammo
4250 = "A" surge current
4251 = "B" surge current
Ordering
Information –
MIL–PRF–39003
M39003
/04
3007
Ordering
M39003 Information
/04 – MIL–PRF–39003
3007
A
Ordering Information – T213 (CSR91
Ordering
MIL product Information – T213 (CSR91 Style)
MIL
product
T
Capacitor
Size
Case
Size
A,
AB,
C, B,
D
A,
Case
C,
D
Size
050
A
Rated050
Tolerance Rated
(VDC)
Product
Only
Capacitance
Voltage Failure
Rate/Military
Product
Only
KTolerance
= ±10%
006(VDC)
=6
A =AN/A
K
050
M
±20% Rated
010
10
K == ±10%
006 = Voltage
6
= N/A
Capacitance
FailureARate/Military
015
= 15
MTolerance
= ±20%
010(VDC)
10
Product Only
020
20
015 = 15
A = N/A
K = ±10%
006
=
6
035
35
020 = 20
M = ±20%
010 = 10
050
50
035 = 35
015 = 15
075
050 = 75
50
020 = 100
20
100
075 = 75
035 = 35
100 = 100
050 = 50
075 = 75
Style)
100 = 100
A
A
Capacitor Class
Slash
Dash Number
Surge Option
Capacitor Class
Slash
Dash Number
Surge Option
Military
Specifi
Failure
Rate
A = C-4250
M39003
/04cation
3007
A
Specifi
cation
Sheet
LevelRate
B
Military
SpecifiNumber
cation
Failure
A = C-4251
C-4250
Capacitor
Class
Slash
DashLevel
Number
Option
Number
C
C-4252
Specifi
cation
Sheet
Number
BSurge
= C-4251
Blank
- No surge
Number
C = C-4252
Military
Specification
Failure Rate
A = C-4250
Blank - No surge
Specifi
cation
Sheet
Number
Level number, including
B = C-4251
Orders
should
be entered
by the
military specification
Number
C = C-4252
Blank - No surge
T2032_T111_AXIAL_T213 • 4/16/2015
T2032_T111_AXIAL_T213 • 4/16/2015
2
2
T2032_T111_AXIAL_T213 • 4/16/2015
2
117
Tantalum Capacitors
Through-Hole
T140 Series
Type andSealed
T242 (CSR23 Style)
Tantalum
Through-Hole
Capacitors –Polar
Hermetically
T140 Series
Type andSealed
T242 (CSR23 Style)
Tantalum
Through-Hole
Capacitors –Polar
Hermetically
Hermetically Sealed
Axial
(cont.)–Polar
Ordering
Information
T140
T140 Series
Axial
MIL–PRF–39003
Type and T242 (CSR23 Style)
Polar Type & T242 (CSR23 Style)
T
T
140
140
Series
A
A
105
105
K
K
–Range:
T140 −55°C to +125°C
1,200 μF •Information
Temperature
Capacitor
Case Capacitance Code Capacitance
Class
Capacitor
TT=
Class
Capacitor
Tantalum
T=
Class
Tantalum
T=
Tantalum
Size
Case
AB,
A,
Size
Case
C, D
A, B,
Size
C, D
A, B,
C, D
140
Series
Hermetically
Sealed
Axial
Series
Hermetically
Capacitor
Sealed Axial
Hermetically
Capacitor
Sealed Axial
Capacitor
(pF)
Capacitance Code
105digits
First two
(pF)
Capacitance
Code
represent
signifi
cant
First two digits
figures.(pF)
Third digit
specifi
number
of
Firstestwo
digits
figures.
Third
digit
zeros.
represent
signifi
cant
specifies number of
figures.
Third digit
zeros.
specifies number of
zeros.
Ordering
Information
T242 (CSR23
Style) – T242 (CSR23 Style)
T
242
A – T242 105
K
(CSR23 Style)
Capacitor
T
Class
Capacitor
TT=
Class
Capacitor
Tantalum
T=
Class
Tantalum
T=
Tantalum
242
Series
Case
A
Size
Case
AB,
A,
Size
Case
C, D
A, B,
Size
C, D
A, B,
C, D
242=
Series
T242
CSR23
Series=
T242
CSR23
T242 =
CSR23
Capacitance
105 Code
(pF)
Capacitance Code
105digits
First two
(pF)
Capacitance
Code
represent
signifi
cant
First two digits
figures.(pF)
Third digit
specifi
number
of
Firstestwo
digits
figures.
Third
digit
zeros.
represent
significant
specifies number
of
figures.
Third digit
zeros.
specifies number of
zeros.
050
Rated050
Voltage
Tolerance
(VDC)
K
050
KTolerance
= ±10%
006(VDC)
=6
Capacitance
M = ±20% Rated
010 = Voltage
10
K = ±10%
006 = 6
Tolerance
015(VDC)
= 15
M = ±20%
010 = 10
020
20
K = ±10%
006 == 15
6
015
030
30
M = ±20%
010
=
10
020 = 20
035
35
015 == 15
030
30
060
60
020 == 20
035
35
050
= 50
030
060 = 30
60
060
60
035 == 35
050
50
060 == 60
60
060
050 = 50
060 = 60
050
Capacitance
Rated050
Voltage
K
Tolerance
(VDC)
K
050
KTolerance
= ±10%
006(VDC)
=6
Capacitance
M = ±20% Rated
010 = Voltage
10
K = ±10%
006 = 6
Tolerance
015(VDC)
= 15
M = ±20%
010 = 10
020
20
K = ±10%
006 == 15
6
015
030
30
M = ±20%
010 == 10
020
20
035
35
015 == 15
030
30
060
60
020 == 20
035
35
050
= 50
030
060 = 30
60
060
60
035 == 35
050
50
060 == 60
60
060
050 = 50
060 = 60
Ordering Information – MIL–PRF 39003
MIL–PRF–39003
Ordering Information – MIL–PRF 39003
M39003 Information
/03 – MIL–PRF
3075 39003
Ordering
M39003
Capacitor
Class
/03
Slash
Dash3075
Number
A
Failure Rate/Military
A
Product Only
A =AN/A
Product
Only
A = N/A
Product Only
A = N/A
A
A
Product Only
A
Graded:
Product Only
Failure
Rate/Military
B = 0.1%/k
hours
Graded:
C =Product
0.01%/kOnly
hours
B = 0.1%/k hours
D
= 0.001%/k hours
Graded:
C
= 0.01%/k hours
G
1.0%/k hours
hours
B == 0.1%/k
D
0.001%/k
hours
Exponential:
C
=
0.01%/k
hours
G = 1.0%/k hours
M
1%/k hours
D = 0.001%/k
hours
Exponential:
P
hours
G == 0.1%/k
1.0%/k
hours
M
1%/k hours
R
= 0.01%/k hours
Exponential:
P
= 0.1%/k hours
S
hours
M === 0.001%/k
1%/k hours
R
0.01%/k
hours
P == 0.001%/k
0.1%/k hours
S
hours
R = 0.01%/k hours
S = 0.001%/k hours
S
Termination
S
Finish
Termination
S
S =Finish
Standard
Termination
(Sn/Pb)
S = Standard
T = Finish
100% Tin
(Sn/Pb)
Standard
TS == 100%
Tin
(Sn/Pb)
T = 100% Tin
S
Termination
S
Finish
Termination
S
S = Finish
Standard
Termination
S = Standard
Finish
S = Standard
7200
7200
Specifi
cation
7200
Specifi
cation
All capacitors
are sleeved
unless Specifi
specification
ed.
0100 = Without sleeve 7200
unless specified.
=AllTape
& Reel sleeved
capacitors
0100
= Withoutare
sleeve 7200
7293
&specifi
7443 = Ammo
unless
= Tape & Reeled.
4250
10 cycles,
25°C7200
0100 =& Without
sleeve
7293
7443 = Ammo
after
Weibull
= Tape
4250
=&
10Reel
cycles, 25°C
4251
=& 10
cycles,
-55 &
7293 Weibull
7443
= Ammo
after
85°C
Weibull25°C
4250 ==after
10 cycles,
cycles,
4251
10
-55 &
4252
= 10 cycles, -55 &
after Weibull
85°C
after Weibull
85°C
Weibull &
4251 ==before
10
4252
10 cycles,
cycles, -55
-55 &
85°C before
after Weibull
85°C
Weibull
4252 = 10 cycles, -55 &
85°C before Weibull
C
SpecifiCcation
SpecifiCcation
All capacitors
are sleeved
unless Specifi
specified.
All capacitors cation
are sleeved
0100 = Without sleeve
unless specified.
7200
=
Tape
&
Reel
All capacitors
sleeved
0100
= Withoutare
sleeve
7293
7443= Ammo
unless&
7200
= specifi
Tape &ed.
Reel
4250
10 cycles,
25°C
0100 =& Without
sleeve
7293
7443= Ammo
after
7200 Weibull
Tape
& Reel
4250
== 10
cycles,
25°C
4251
=& 10
cycles,
-55 &
7293 Weibull
7443=
Ammo
after
85°C
after
Weibull25°C
4250
=
10
cycles,
4251 = 10 cycles, -55 &
4252
= 10 cycles, -55 &
after Weibull
85°C
after Weibull
85°C
Weibull &
4251 ==before
10
4252
10 cycles,
cycles, -55
-55 &
85°C
after
Weibull
4252 = 10 cycles, -55 &
A
SurgeAOption
M39003
/03cation
3075
AOption
Capacitor
Slash
Dash
Number
MilitaryClass
Specifi
Failure
Rate
ASurge
= C-4250
Specifi
cation
Sheet
Number
Level
B
=
C-4251
Capacitor
Slash
Dash
Number
Option
MilitaryClass
Specifi
cation
Failure
Rate
ASurge
= C-4250
Number
C = C-4252
Specification
Sheet Number
Level
B = C-4251
Blank
No
surge
Military
Specification
Failure Rate
A == C-4250
Number
C
C-4252
SpecifiThrough-Hole
cation
Sheet
Number
Level
B = C-4251
Tantalum
Capacitors
– Hermetically
Sealed
Blank
- No surge
OrdersNumber
should be entered by the military specification number, including
C = C-4252
GR500/T210 Series High Reliability
Blank - Nothe
surge
dash number and surge option letter (A, B or C).
T210/T240/GR500 Series High Reliability
to 330 μF Information
T
210
A
105
K
050
Capacitor
Case
Capacitance
Rated Voltage
Series
Class
Size
Tolerance
(VDC)
T=
210 = GR500/J
A, B,
First two digits
J = ±5%
006 = 6.3
Tantalum
(KEMET) High
C, D
K = ±10%
010 = 10
Reliability,
Solid • P.O. Box 5928 • fiGreenville,
gures. Third
M = ±20%
015 = 15
Corporation
SCdigit
29606 (864)
Electrolyte, Graded,
specifies number of
020 = 20
Hermetic Seal, Axial
zeros to follow.
025 = 25
Lead, Polar
035 = 35
050 = 50
075 = 75
100 = 100
R
Failure Rate
Termination Finish
T2034_T140_AXIAL_T242 • 4/16/2015
2
M = 1%/k hours
S = Standard
T2034_T140_AXIAL_T242 • 4/16/2015
2
P = 0.1/k hours
(Solder-coated nickel)
R = 0.01%/k
hours
T2034_T140_AXIAL_T242 • 4/16/2015
2
S = 0.001%/k hours
118
Item
-55°C to 125°C
S
Tantalum Capacitors
Through-Hole
Tantalum
Through-Hole
Capacitors – Solder
Hermetically
Sealed
T215 Series
Axial High Temperature
(CSR13
Style)
T215 Series Axial High Temperature Solder (CSR13 Style)
Hermetically Sealed Axial (cont.)
T215 Series High Temperature
(CSR13 Style)
Ordering Solder
Information
to 330 μF Information
T
T
Capacitor
Class
Capacitor
Class
T=
Tantalum
T=
Tantalum
215
215
A
A
Case
Size
Case
Size
A, B,
Series
Series
Hermetically
Sealed
Hermetically
Axial
High
Sealed
Temperature
Axial High
Solder
Temperature
Solder
C,B,
D
A,
C, D
105
105 Code
Capacitance
(pF) Code
Capacitance
(pF)
First two digits
050
M39003
/01
6003
216
Specification
Specification
unless
specified.
All
capacitors
are sleeved
0100 =specifi
Without
unless
ed.sleeve
7200 == Without
Tape & Reel
0100
sleeve
7293 =& Tape
7443 &= Reel
Ammo
7200
4250 &= 7443
10 cycles,
25°C
7293
= Ammo
after Weibull
4250
= 10 cycles, 25°C
4251Weibull
= 10 cycles, -55 &
after
85°C=after
Weibull-55 &
4251
10 cycles,
4252 after
= 10 cycles,
85°C
Weibull -55 &
85°C=before
Weibull
4252
10 cycles,
-55 &
E
A
106
K
050
C
S
CSS13 Style
/10
Military Specification
Capacitor
Class
Number
Specification Sheet
Slash
Number
2049
Failure Rate Level
Dash Number
Military Specifi
cation
Specifi
cation Sheet
Failure Rate Level
Ordering
Information
– T256
(CSS33 Style)
Number
Number
MIL
productStyle
CSS33
Ordering Information – T256 (CSS33 Style)
S
S = Sleeved
Sleeve
U = Unsleeved
use C - 0100
S = Sleeved
U = Unsleeved use C - 0100
MIL
product
© KEMET
Electronics Corporation • P.O. /10
Box 5928 • Greenville, SC 29606
M39003
2549 (864) 963-6300 • www.kemet.com
S
Ordering
Information
T256
(CSS33
Style)
Corporation •–P.O.
Box 5928
• Greenville,
SC 29606 (864) 963-6300 • www.kemet.com
Capacitor Class
Slash
Dash Number
Sleeve
Capacitor
Class
Number
Specification Sheet
Slash
Number
Failure Rate Level
Dash Number
Capacitor
Class
Number
Specification Sheet
Slash
Number
Failure Rate Level
Dash Number
S = Sleeved
Sleeve
U = Unsleeved
S use C - 0100
S = Sleeved
Sleeve
U = Unsleeved
use C - 0100
Number
Specification Sheet
Number
Failure Rate Level
MIL product
M39003
7200
7200
Rated Voltage
Termination
Ordering
Information
T216/T256
Series
Failure
C-Spec
CSS13:
0.12
μF,
CSS33: –1.2Size
μF
• Temperature
−55°C to +125°C
T to 330
216
Ato 1,000Code
106(pF)
K Range:
050
C Rate
S
Class
Tolerance
(VDC)
Finish
Performance
Characteristics
Capacitor
Case
Capacitance
Capacitance
T=
216
A, B,
First
two digits
K = ±10% Rated
006 =Voltage
6
Graded:
STermination
= Standard
Blank C-Spec
= Sleeved
Performance
Characteristics
Series
Failure
T
216
AD
106(pF)
K
050
C Rate
S
Class
Size
Code
Tolerance
Finish
Tantalum
(MIL–C–39003/10,
C,
represent
010(VDC)
= 10
B = 0.1%/k
hours
(Solder-coated
0100 = Unsleeved
Item
Performance
Characteristics
CSS13)
signifi
015
15
C
= 0.01%/k hours
7200
& Reel
Capacitor
Case
Capacitance
Capacitance
T=
216
B,
First
twocant
digits
K = ±10% Rated
006 ==Voltage
6
Graded:
STermination
=nickel)
Standard
Blank=C-Spec
=Tape
Sleeved
Series
Failure
Rate
ItemOperatingA,
Performance
Characteristics
figures.
Third
digitto 125°C
020
20
7200
Tape & Reel
Class
Size
Code
(pF)
Tolerance
Finish
-55°C
Tantalum
(MIL–C–39003/10,
C,Temperature
D
represent
010(VDC)
== 10
B = 0.1%/k hours
(Solder-coated
0100 == Unsleeved
256 Operating Temperature
specifi
es cant
numberto 125°C
035
35
7293
7443 &
=
CSS13)
signifi
015 === 15
C = 0.01%/k hours
7200 &
== Tape
T=
216Rated
A, B, Range
First
two-55°C
digits μF – K330
= ±10%
6
Graded:
S =nickel)
Standard
Blank
SleevedReel
Capacitance
0.0047
μF at 120 006
Hz/25°C
(MIL–C–39003/10,
of zeros.
050
= 20
50
Ammo
fi
gures.
Third
digit
020
=
7200
=
Tape
&
Reel
Tantalum (MIL–C–39003/10, C, D
represent
010 = 10
B = 0.1%/k hours
(Solder-coated 0100 = Unsleeved
0.0047
μF – 330 μF at 120 Hz/25°C
CSS33)
075
= 75
256
specifi
es cant
number
035 (10%),
35 M Tolerance
7293 =& Tape
7443 &= Reel
J Tolerance (5%), K Tolerance
(20%)hours
signifi
C = 0.01%/k
nickel)
7200
CSS13)
015
== 15
(MIL–C–39003/10,
of zeros.
050(10%),
50 M Tolerance (20%)
Ammo= Tape & Reel
figures.
Third
digit
020
== 20
7200
J Tolerance
(5%), K Tolerance
6 – 100 V
CSS33)
075 == 75
256 Rated Voltage Range
specifies number
035
35
7293 & 7443 =
Rated–Voltage
Range
6 – Style)
100 V
Ordering (MIL–C–39003/10,
Information
(CSS13
of zeros.
050 =Specifi
50 cation Table
Ammo
DF (120T216
Hz at 25°C)
CSS33)
075 = 75
MIL product
DF (120 Hz at 25°C)
and Impedance (100
kHz at 25°C)
Refer
to Part Number Electrical Specification Table (for reference only)
OrderingESRInformation
– T216
(CSS13
Style)
ESR
and
Impedance
(100
kHz
at
25°C)
Refer
to
(for reference only)
Refer
to Part
Part Number
Number Electrical
Electrical Specifi
Specification
cation Table
MIL product
M39003
/10Current
2049
STable (at rated voltage up to +85°C and 2/3 of rated
Leakage
voltage
at 125°C)
Refer
to applied
Part Number
Electrical Specification Table (at rated voltage up to +85°C and 2/3 of rated
Ordering Information Leakage
– T216
(CSS13
Style)
Current
Capacitor
Class
Slash
Dash
Number
SleeveB (0.1%/k hours), C (0.01%/k hours), D (0.001%/k
voltage
applied
atrate:
125°C)
Failure
Rate (MIL–PRF–39003,
CSR13
Approved
failure
Graded G (1.0%/k hours),
MIL product
M39003
/10 only)
2049
S
capacitors
hours)
and
Exponential
M
(1.0%/k
hours),
hours),
R (0.01%/k
hours),
S (0.001%/k
hours)
Failure
Rate
(MIL–PRF–39003,
CSR13
Approved
failure
rate:
Graded
G
(1.0%/k
hours),
B (0.1%/k
hours),
C (0.01%/k
hours),
D (0.001%/k
Specification Sheet
Failure Rate Level
S = SleevedP ( 0.1%/k
Capacitor
Class
Slash
Dash
Number
Sleeve
capacitors
hours) and Exponential M (1.0%/k
P ( 0.1%/k
Number
Numberonly)
U = hours),
Unsleeved
use C -hours),
0100 R (0.01%/k hours), S (0.001%/k hours)
M39003
S =(Sn/Pb)
Standard
(Sn/Pb)
cation
Sheet
Level
C-4251
T216Specifi
Series
and
T256 (CSS33
Style)
Military
SpecifiNumber
cation(CSS13 Style)
Failure
Rate
DE = C-4250
Number
C-4252
Tantalum
Through-Hole
Capacitors
– Hermetically
Sealed
Specifi
cation
Sheet
Number
Level
EF = C-4251
NoStyle)
C-Spec
Number
FH==C-4252
T216 Series
MIL–PRF–39003 (CSS13 Style) and T256 (CSS33
OrderingAxial
Information
– T216/T256
H = No C-Spec
Orders should be entered by the military specification number, including the dash number and surge option letter (D, E, F, or H).
T216
Series
Axial
MIL–PRF–39003
Style)
andnumber,
T256 (CSS33
Style)
Orders
should
be
entered
by the military
specifi
cation
including
the dash number and surge option letter (D, E, F, or H).
Ordering
Information
–(CSS13
T216/T256
T
B = 0.1%/k hours
Graded:
0.01%/khours
hours
BC == 0.1%/k
0.001%/khours
hours
CD == 0.01%/k
%/k hours
DG== 1.0
0.001%/k
hours
Exponential:
G=
1.0 %/k hours
M = 1%/k hours
Exponential:
P = 1%/k
0.1%/khours
hours
M
0.01%/khours
hours
PR == 0.1%/k
0.001%/khours
hours
RS = 0.01%/k
S = 0.001%/k hours
S
S
Termination
Finish
Termination
S =Finish
Standard
SurgeEOption
Option
DSurge
= C-4250
(CSS13 Style) &CaseT256 Capacitance
(CSS33 Style)
Capacitor
Capacitance
Capacitance Range:
B
B
Product
Only
Failure
Rate/Military
Product
Only
Graded:
OrderingStyle
Information – (CSR13 Style)
CSR13
Ordering
Information – (CSR13 Style)
M39003
/01
6003
Capacitor
Class
Slash
Dash
Number
Capacitor
Class
Slash
Dash
Number
Tantalum
Through-Hole
Capacitors
–
Hermetically
Military
Specification
FailureSealed
Rate
K
K
050
Capacitance
Rated
Voltage
Tolerance Rated
(VDC)
Capacitance
Voltage
JTolerance
= ±5%
006(VDC)
=6
represent
±10%
010 = 610
First twosignifi
digitscant JK==±5%
006
figures. Third
±20%
015 == 10
15
represent
signifidigit
cant KM==±10%
010
specifi
esThird
number
020 == 15
20
figures.
digitof M = ±20%
015
zeros.
035 == 20
35
specifies
number of
020
050 == 35
50
zeros.
035
075 = 50
75
050
100 == 75
100
075
100 = 100
/10
M39003
/10
2549
2549
Item
Performance
Characteristics
Item
Rated
Capacitance
Range
Operating
Temperature
Item
S
T2064_T215 • 4/16/2015
T2064_T215 • 4/16/2015
2
2
S = Sleeved
U = Unsleeved use C - 0100
-55°C to 125°C
CSS13 = 0.12 μF – 330 μF at 120 Hz/25°C
-55°C to=125°C
CSS33
1.2 μF – 1000 μF at 120 Hz/25°C
119
Tantalum Capacitors
Through-Hole
T222 Series Axial MIL–PRF–39003 Polar Miniature (CSR09 Style)
Hermetically Sealed
Axial (cont.)
T222 Series Axial MIL–PRF–39003 Polar Miniature (CSR09 Style)
T222 Series MIL–PRF–39003 Polar Miniature (CSR09 Style)
Capacitance Range: 0.047 Ordering
to 18T μF • Temperature
222
A
225
K
Capacitor
T
Class
Capacitor
T=
Class
Tantalum
T=
Tantalum
Series
222
T222
Series
(CSR09)
T222
(CSR09)
A, B
010
B
S
Capacitance
Capacitance Rated Voltage Failure Rate/Military
Termination
225(pF)
K
010
B Only
S
Code
Tolerance
(VDC)
Product
Finish
Capacitance
Capacitance
Rated
Failure
First
two digits
J = ±5%
006 =Voltage
6
Graded:Rate/Military STermination
= Standard
Code signifi
(pF) cant KTolerance
Only
FinishAlloy
represent
= ±10%
010(VDC)
= 10
B =Product
0.1%/k hours
Positive:
figures.
Third
digit
015 = 615
C = 0.01%/k hours
(solderFirst two
digits
J = ±5%
006
Graded:
S 52
= Standard
specifies signifi
number
of K = ±10%
020 == 10
20
0.001%/k
hours Positive:
coated)
represent
cant
010
BD == 0.1%/k
hours
Alloy
035==15
35
1.0%/k hours
Negative:
figures.zeros.
Third digit
015
CG == 0.01%/k
hours
52
(solder050 == 20
50
Solderspecifies number of
020
DExponential:
= 0.001%/k hours
coated)
075 = 35
75
1%/k hours
coated
nickel
zeros.
035
GM == 1.0%/k
hours
Negative:
P = 0.1%/k hours
050 = 50
Exponential:
SolderR = 1%/k
0.01%/k
hours
075 = 75
M
hours
coated nickel
0.001%/k
hours
PS == 0.1%/k
hours
R = 0.01%/k hours
S = 0.001%/k hours
C
Specifi
Ccation
All capacitors
are sleeved
Specification
unless specified.
7200
= Tape &are
Reel
All
capacitors
sleeved
7293 &specifi
7443 ed.
= Ammo
unless
7200 = Tape & Reel
7293 & 7443 = Ammo
MIL product
CSR09 Style
Ordering
Information – T222 (CSR09 Style)
MIL product
M39003
Capacitor
Class
M39003
Case
A
Size
Case
A, B
Size
/02
2061
D
Slash
/02
Dash
Number
2061
SurgeDOption
Military
Specifi
cation
Failure
Rate
DSurge
= C-4250
Capacitor
Class
Slash
Dash
Number
Option
Specification
Sheet Number
Level
E = C-4251
Tantalum
Hermetically
Sealed/Axial
Through-Hole
Capacitors
Number
C-4252
Military
Specification
Failure Rate
DF = C-4250
T225
Series
High Temperature
Solder
No C-Spec
Specifi
cation
Sheet Number
Level
EH == C-4251
Tantalum
Hermetically Sealed/Axial Through-Hole Capacitors F = C-4252
Number
Orders
should
be Temperature
entered by theSolder
military specification number, H
including
= No C-Spec
T225
Series
High
Orders should be
entered by(CSR09
the military specifi
cation number, including the dash number and surge option letter (D, E, F, or H).
Solder
Style)
Information
Capacitance Range: 0.047 Ordering
to 18T μF • Temperature
225
ARange: −55°C
225 to +125°CK
010
CSR09
Style
Failure Rate (MIL–39003, CSR13 capacitors only)
S
M39003
Slash
/02
Dash Number
3036
A
Surge Option
A
Military
Specification
Failure Rate
A = C-4250
Capacitor
Class
Slash
DashLevel
Number
Option
Specification
Sheet
Number
BSurge
= C-4251
Number
C-4252
Military
Specification
Failure Rate
AC == C-4250
© KEMET
• P.O. Box 5928
• Greenville,BBlank
SC
29606
(864) 963-6300 • www.kemet.com
T2033_T222_AXIAL • 4/16/2015
- No surge
Specification
Sheet Number
Level
= C-4251
= C-4252
OrdersNumber
should be entered by the military specification number, C
including
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville,Blank
SC 29606
(864) 963-6300 • www.kemet.com
T2033_T222_AXIAL • 4/16/2015
- No surge
Item
Item
120
7200
Approved failure rate: S (0.001%/k hours) - Exponential, D (0.001%/k hours) - Graded
Ordering
Information
– (CSR09
Style)
M39003
/02
3036
Capacitor Class
B
Capacitor
Case Capacitance Code Capacitance Rated Voltage Failure Rate/Military Termination
Series
Specifi
cation
T
225
A
225
K
010
B Only
S
7200
Class
Size
(pF)
Tolerance
(VDC)
Product
Finish
Performance
Characteristics
Item
Performance
Characteristics
Capacitor
Case
Capacitance
Code
Capacitance
Rated
Voltage
Failure
Rate/Military
Termination
T=
Hermetically
A, B
First two digits
J = ±5%
006 = 6
Graded:
S = Standard All capacitors
are sleeved
Series
Specification
Class
Size Temperature
(pF)
Only
Finish
Operating
-55°CKTolerance
to=125°C
Tantalum
SealedItem
represent
significant
±10%
010(VDC)
= 10 Performance
B =Product
0.1%/k hours
unless specified.
Characteristics
Axial High
figures.
Third
digit
015 = 615
C = 0.01%/k hours
0100
= Without
7200
T=
Hermetically
B
FirstRange
two
digits
±5%
Graded:
S = Standard All
capacitors
aresleeve
sleeved
RatedA,Capacitance
0.047J–=18
μF at 120006
Hz/25°C
-55°C
specifies signifi
number
of Kto=125°C
020 == 10
20
0.001%/k
hours
= Tapespecifi
& Reeled.
Tantalum Temperature
Sealed Operating Temperature
represent
cant
±10%
010
BD == 0.1%/k
hours
unless
Solder
zeros
to
follow.
035==15
35 (10%) CG == 0.01%/k
1.0%/k hours
7293 =&Without
7443 = Ammo
0100
sleeve 7200
Axial
High Capacitancefigures.
Third
digitJ Tolerance (5%), K Tolerance
015
hours
Tolerance
0.047 – 18 μF at 120 Hz/25°C
050 == 20
50
cycles, 25°C
=4250
Tape= &10Reel
Temperature
specifies number of
020
DExponential:
= 0.001%/k hours
Rated Voltage Range
– 75 V
075 = 35
75 (10%) GM == 1.0%/k
1%/k hours
after Weibull
7293
& 7443 = Ammo
Solder
to follow. J6 Tolerance
035
hours
Capacitance zeros
Tolerance
(5%), K Tolerance
P = 0.1%/k hours
4251 = 10 cycles, 25°C
-55 &
= 50 Specifi
Exponential:
4250
DF (120 Hz at 25°C)
Electrical
cation Table
Rated Voltage Range
6 – 75 V
R = 1%/k
0.01%/k
hours
85°CWeibull
after Weibull
075 = 75
M
hours
after
0.001%/k
hours
4252 == 10
10 cycles,
cycles, -55
-55 &&
PScation
== 0.1%/k
hours
4251
ESR and Impedance (100 kHz at 25°C)
Refer to Part Number Electrical Specifi
Table
DF (120 Hz at 25°C)
85°C after
before
Weibull
85°C
Weibull
R = 0.01%/k hours
Refer to Part Number Electrical Specification Table (at rated voltage up to +85°C and 2/3 of rated
Leakage
Scation
= 0.001%/k
4252 = 10 cycles, -55 &
ESR and Impedance (100
kHz atCurrent
25°C)
Refer
to applied
Part Number
Electrical Specifi
Table hours
voltage
at 125°C)
Refer
to
Part
Number
Electrical
Specifi
cation
Table
(at
rated
voltage
up
to
+85°C
and 2/3 of rated
Failure Rate (MIL–39003, CSR13Leakage
capacitors
only)
Approved failure rate: S (0.001%/k hours) - Exponential, D (0.001%/k hours) - Graded
Current
voltage applied at 125°C)
Ordering Information – (CSR09 Style)
Rated Voltage Range
DF (120 Hz at 25°C)
Rated Voltage Range
-55°C to 125°C
0.047 – 18 μF at 120 Hz/25°C
-55°C to 125°C
J Tolerance (5%), K Tolerance (10%)
0.047 – 18 μF at 120 Hz/25°C
6 – 75 V
J Tolerance (5%), K Tolerance (10%)
6 – 75 V
2
2
Tantalum Capacitors
Through-Hole
T245 Series Axial High Temperature Solder (CSR23 Style)
Hermetically Sealed
Axial
T245 Series
Axial High(cont.)
Temperature Solder (CSR23 Style)
Capacitance Range: 1.2 to Ordering
1,000 μF • Temperature
T245 Series High Temperature Solder (CSR23 Style)
T
Capacitor
T
Class
Capacitor
T=
Class
Tantalum
T=
Tantalum
245
A
245
Series
Case
A
Size
Case
A, B,
Size
C, D
A, B,
C, D
Series
Hermetically
Sealed
Hermetically
Axial High
Sealed
Temperature
Axial
High
Solder
Temperature
Solder
105
K
050
Capacitance
Rated
Voltage
105 Code Capacitance
K
050
(pF)
Tolerance
(VDC)
Capacitance Code Capacitance Rated Voltage
First (pF)
two digits
KTolerance
= ±10%
006(VDC)
=6
010 = 10
First two
digits
K = ±10%
006
figures.
Third
digit
015 = 615
represent
cant
010
specifies signifi
number
of M = ±20%
020 == 10
20
figures.zeros.
Third digit
015
035==15
35
specifies number of
020
050 == 20
50
zeros.
035 = 35
050 = 50
A
S
7200
A
Product Only
Graded:
Product Only
B = 0.1%/k hours
Graded:
C = 0.01%/k hours
BD == 0.1%/k
hours
0.001%/k
hours
CG == 0.01%/k
hours
1.0%/k hours
DExponential:
= 0.001%/k hours
G
hours
M == 1.0%/k
1%/k hours
Exponential:
P = 0.1%/k hours
M
hours
R = 1%/k
0.01%/k
hours
PS == 0.1%/k
hours
0.001%/k
hours
R = 0.01%/k hours
S = 0.001%/k hours
Termination
S
Finish
Termination
S =Finish
Standard
7200
Specifi
cation
S = Standard
CSR23
Style
M39003
/03
3075
E
Capacitor
Class
M39003
Slash
/03
Dash
Number
3075
SurgeEOption
Military
Specifi
cation
Failure
Rate D =Surge
C-4250
Capacitor
Class
Slash
Dash
Number
Option
Tantalum
Capacitors
– Hermetically
Sealed E = C-4251
SpecifiThrough-Hole
cation
Sheet
Number
Level
Military
Specification(CSR33Failure
NumberAxial MIL–PRF–39003
C-4252
T252 Series
Style) Rate DF = C-4250
Specification
Sheet Number
Level
EH == C-4251
No C-Spec
Number
Tantalum
Through-Hole Capacitors – Hermetically Sealed F = C-4252
Orders should be entered by the military specification number,
including
H = No C-Spec
Ordering
Information
T252
Series Axial
MIL–PRF–39003 (CSR33 Style)
Orders should be entered by the military specification number, including the dash number and surge option letter (D, E, F, or H).
(CSR33 Style)
T
252
A
K
Information
1,000
μF • Temperature
Range: 125
−55°C to +125°C
Capacitor
Case
Capacitance
Performance
SeriesCharacteristics
Class
Size
Code (pF)
T
252 Characteristics
A
125
Performance
T=
252
A, B,
First two digits
K
050
M
S
C
Product Only
Termination
Finish
Specification
M
S
K = ±10%
006 = 6
Graded:
S = Standard
Item
Performance
Characteristics
Case
Capacitance
Capacitance
Rated
Voltage
Failure
Rate/Military
Termination
(CSR33)
C,
D
represent
signifi
cant
M
=
±20%
010
=
10
B
=
0.1%/k
hours
Series
Size
CodeThird
(pF) digit -55°C
Tolerance
Finish
gures.
= 15
C =Product
0.01%/kOnly
hours
to 125°C 015(VDC)
ItemOperatingfiTemperature
Performance
Characteristics
C
CSR33 Style
M39003
MIL product
Capacitor Class
M39003
050
Tolerance
(VDC)
unless Specifi
specification
ed.
specifi
020 = 620
D = 0.001%/k hours S = Standard All
7200
= Tape &are
Reel
T=
252
A, B,
Firstes
twonumber
digits of K = ±10%
006
Graded:
capacitors
sleeved
Range
1.2 M
– 1,000
μF at 120
zeros.
035Hz/25°C
35
7293 &specifi
7443 ed.
= Ammo
Tantalum
(CSR33) Rated
C, DCapacitance
represent
significant-55°C
=to±20%
010
== 10
BExponential:
= 0.1%/k hours
unless
Operating
Temperature
125°C
050==15
50
1%/k hours
4250 == Without
10 cycles,
25°C after
015
CM==0.01%/k
hours
0100
sleeve
Capacitance
Tolerance
K Tolerance (10%), M Hz/25°C
Tolerance (20%)
Rated
Capacitance
0.1%/k hours
Weibull
specifiesRange
number of 1.2 – 1,000 μF at 120
020 = 20
DP = 0.001%/k
hours
7200
= Tape & Reel
R = 0.01%/k hours
4251 &= 10
cycles,
-55 &
zeros.
= 35
Exponential:
7293
7443
= Ammo
Rated Voltage
Range
– 50 V (10%), 035
Capacitance
Tolerance
K6 Tolerance
M Tolerance
(20%)
S = 1%/k
0.001%/k
85°C=after
Weibull25°C after
050 = 50
M
hourshours
4250
10 cycles,
DF (120
Hz atRange
25°C)
4252 = 10 cycles, -55 &
P =cation
0.1%/kTable
hours
Weibull
Rated
Voltage
6Refer
– 50 to
V Part Number Electrical Specifi
85°Cand
Weibull
R =cation
0.01%/k
hours
4251
=before
102/3
cycles,
-55 &
Table
(at rated voltage up to +85°C
of
rated
Leakage
DF (120
Hz atCurrent
25°C)
Tablehours
S =cation
0.001%/k
85°C after Weibull
Refer
to Part
Number
cation
Table
(at ratedhours),
voltage
to +85°C
and
2/3cycles,
of rated
4252
= 10
-55 &
Failure Rate (MIL–PRF–39003,
CSR23
Approved
failure
rate: Electrical
Graded GSpecifi
(1.0%/k
hours),
B (0.1%/k
C up
(0.01%/k
hours),
D
(0.001%/k
Leakage Current
voltage
applied
at 125°C)M (1.0%/k hours), P (0.1%/k hours), R (0.01%/k hours),
85°C
before Weibull
capacitors only)
hours) and
Exponential
S (0.001%/k
hours)
Ordering
Information
– T252
(CSR33
Style)
Failure
Rate (MIL–PRF–39003,
CSR23
Approved
failure rate: Graded G (1.0%/k hours), B (0.1%/k hours), C (0.01%/k hours), D (0.001%/k
MIL product
capacitors only)
hours) and Exponential M (1.0%/k hours), P (0.1%/k hours), R (0.01%/k hours), S (0.001%/k hours)
Capacitor
Tantalum
Class
Specification
All capacitors
are sleeved
unless specified.
All
capacitors
aresleeve
sleeved
0100
= Without
unless
ed.Reel
7200 =specifi
Tape &
0100
7293 =&Without
7443 = sleeve
Ammo
7200
& Reel
4250 == Tape
10 cycles,
25°C
7293
& 7443 = Ammo
after Weibull
4250
4251 = 10 cycles, 25°C
-55 &
after
85°CWeibull
after Weibull
4251
4252 == 10
10 cycles,
cycles, -55
-55 &&
85°C
Weibull
85°C after
before
Weibull
4252 = 10 cycles, -55 &
/06
4073
B
Slash
Dash Number
Surge Option
/06
4073
B
Military
Specification
Failure Rate
B = C-4251
Specification
Sheet
Number
CSurge
= C-4252
Capacitor
Class
Slash
DashLevel
Number
Option
Number
Military
Specification
Failure Rate
B = C-4251
should
be entered
by the
military
specifi
cation
number, C
including
the(864)
dash963-6300
number and
surge option letter (B, or C).
Specifi
cation
Sheet
Number
Level
= C-4252
©Orders
KEMET
Electronics
Corporation
• P.O. Box
5928
• Greenville,
SC
29606
• www.kemet.com
Number
T2067_T245 • 4/16/2015
2
T2067_T245 • 4/16/2015
2
Orders should be entered by the military specification number, including the dash number and surge option letter (B, or C).
Item
Item
Operating
Temperature
Capacitance
Tolerance
RatedRated
Capacitance
Voltage Range
Range
Capacitance
Tolerance
DF (120 Hz
at 25°C)
-55°C to 125°C
1.2 – 1,000 μF at 120 Hz/25°C
-55°C
to 125°C
K Tolerance
(10%), M Tolerance (20%)
1.2
6 – –501,000
V μF at 120 Hz/25°C
KRefer
Tolerance
M Tolerance
(20%) cation Table
to Part(10%),
Number
Electrical Specifi
121
Tantalum Capacitors
Through-Hole
T255 Series
Axial High Temperature
(CSR33
Style)
Tantalum
Through-Hole
Capacitors – Solder
Hermetically
Sealed
Hermetically Sealed
Axial
T255 Series
Axial High(cont.)
Temperature Solder (CSR33 Style)
Ordering Solder
Information
(CSR33 Style)
1,000 μF • Temperature
T
Capacitor
T
Class
Capacitor
T=
Class
Tantalum
T=
Tantalum
255
255
Series
A
Series
Hermetically
Sealed
Hermetically
Axial High
Sealed
Temperature
Axial High
Solder
Temperature
Solder
Case
A
Size
Case
A, B,
Size
C, D
A, B,
C, D
125
K
OrderingStyle
Information – T255 (CSR33 Style)
CSR33
M39003
/06
4073
H
M39003
Capacitor
Class
/06
Slash
4073
Dash
Number
SurgeHOption
S
Termination
S
Finish
Termination
S =Finish
Standard
S = Standard
PerformanceSeries
Characteristics
Case Size
Class
Performance
Characteristics
T
262
T=
Hermetically
C,CD
Specification
4251 = 10 cycles, -55 &
85°C after Weibull
4251 = 10 cycles, -55 &
4252 = 10 cycles, -55 &
85°C after Weibull
4252 = 10 cycles, -55 &
7200 = Tape & Reel
7293 & 7443 = Ammo
7200 = Tape & Reel
7293 & 7443 = Ammo
K
050
C
C
Code (pF)
Capacitance
Tolerance
Rated Voltage
(VDC)
Failure Rate
Termination Finish
006050
=6
Graded: C
Item
Performance
Characteristics
Capacitance
Rated
Sealed Axial
represent
significant Capacitance
K = ±10%
010 = Voltage
10
B = 0.1%/k hours
Series
Case Size
Failure Rate
CodeThird
(pF) digit
Tolerance
Capacitor
figures.
M
= ±20%
015(VDC)
= 15
C = Characteristics
0.01%/k hours
ItemOperating Temperature
Performance
-55°C
to 125°C
Care sleeved
All capacitors
unless specified.
Termination Finish
specifi
es
number
of
020
=
20
D
=
0.001%/k
hours
7200
= Tape &are
Reel
T=
Hermetically
C, D
First two digits
J = ±5%
006 = 6
Graded:
All capacitors
sleeved
Operating
Temperature
-55°C
to 125°C
Rated
Capacitance
Range
1.2 –1,000
Hz/25°C010
zeros.
035 == 10
35
7293 &specifi
7443 ed.
= Ammo
Tantalum
Sealed Axial
represent
signifi
cant μFKat=120
±10%
BExponential:
= 0.1%/k hours
unless
050==15
50
1%/k hours
4251 == Without
10 cycles,
-55 &
0100
sleeve
Capacitor
figures. Third
digit μF(10%),
Mat =120
±20%
015
CM==0.01%/k
hours
Rated
Capacitance
Range
1.2
–1,000
Capacitance
Tolerance
K Tolerance
MHz/25°C
Tolerance
(20%)
0.1%/k hours
85°C =after
specifies number of
020 = 20
DP == 0.001%/k
hours
7200
TapeWeibull
& Reel
Capacitance
Tolerance
K6 Tolerance
R = 0.01%/k hours
4252 &= 7443
10 cycles,
-55 &
Rated Voltage
Range zeros.
– 50 V (10%), M Tolerance
035(20%)
= 35
Exponential:
7293
= Ammo
S == 1%/k
0.001%/k
85°C=before
Weibull
050 = 50
M
hourshours
4251
10 cycles,
-55 &
Rated
Voltage
6Refer
– 50 to
V Part Number Electrical Specification Table
DF (120
Hz atRange
25°C)
85°C after Weibull
P = 0.1%/k hours
R = 0.01%/k
hours only)
4252 = 10 cycles, -55 &
DF(100
(120kHz
Hz at
Refer
ESR and Impedance
at 25°C)
25°C)
Refer to
to Part
Part Number
Number Electrical
Electrical Specifi
Specification
cation Table
Table
(for reference
S = 0.001%/k hours
Refer
to
Part
Number
Electrical
Specifi
cation
Table
(at
rated
voltage
up
to
+85°C
and 2/3 of rated
Ordering
– kHz
T262
(CSR21
Style)
ESRInformation
and Impedance (100
atCurrent
25°C)
Refer
to Part Number Electrical Specification Table (for reference only)
Leakage
MIL product
Leakage Current
Failure Rate (MIL–PRF–39003,
CSR33
Approved
failureatrate:
Graded G (1.0%/k hours), B (0.1%/k hours), C (0.01%/k hours), D (0.001%/k
voltage
applied
125°C)
capacitors
only)
hours)
and Exponential M (1.0%/k hours), P (0.1%/k hours), R (0.01%/k hours), S (0.001%/k hours)
Ordering
Information
– T262CSR33
(CSR21
Style)
Failure
Rate
(MIL–PRF–39003,
Approved
failure
rate:
Graded
G (1.0%/k hours), B (0.1%/k hours), C (0.01%/k hours), D (0.001%/k
M39003
/09
3074
B
MIL product
capacitors only)
hours) and Exponential M (1.0%/k hours), P (0.1%/k hours), R (0.01%/k hours), S (0.001%/k hours)
Capacitor
Tantalum
Class
First 106
two digits
K
J = ±5%
CSR21 Style
Capacitor Class
M39003
Military
Slash
/09
Specification
Dash Number
3074
Failure Rate
Surge Option
B
B = C-4251
Specification
Sheet Number
Level
C = C-4252
Capacitor Class
Slash
Dash Number
Surge Option
Number
Specifi
cation
Failure
Rate
= C-4251
OrdersMilitary
should be entered
by the
military specifi
cation
number, Bincluding
the dash number and surge option letter (B, or C).
Specification
Sheet Number
Level
C = C-4252
© KEMET
Number
T2066_T255 • 4/16/2015
2
©
KEMET
Electronics
Corporation
• P.O. specifi
Box 5928
• Greenville,
SC 29606
• www.kemet.com
Orders
should
be entered
by the military
cation
number, including
the(864)
dash963-6300
number and
surge option letter (B, or C).
T2066_T255 • 4/16/2015
2
Item
Item
Capacitance
Tolerance
Operating
Temperature
Rated
Voltage
Range
122
C
C
Specification
106
Information
330
μF • Temperature
Range: −55°CCapacitance
to +125°C
Capacitor
M
M
Product Only
Graded:
Product Only
B = 0.1%/k hours
Graded:
C = 0.01%/k hours
B = 0.1%/k hours
D = 0.001%/k hours
C = 0.01%/k hours
G = 1.0%/k hours
D = 0.001%/k hours
Exponential:
G = 1.0%/k hours
M = 1%/k hours
Exponential:
P = 0.1%/k hours
M = 1%/k hours
R = 0.01%/k hours
P = 0.1%/k hours
S = 0.001%/k hours
R = 0.01%/k hours
S = 0.001%/k hours
Capacitor
Class
Slash
Dash
Number
Option
Military
Specifi
cation
Failure
Rate
ESurge
= C-4251
Tantalum
Capacitors
– Hermetically
Sealed
SpecifiThrough-Hole
cation
Sheet
Number
Level
F = C-4252
Military
Specification
Failure Rate
E = C-4251
Number
H = Hi Temp
T262
Series
Specifi
cation
Sheet Number(CSR21 Style)
Level
F = C-4252
Solder Only
Number
H = Hi Temp
Orders should be entered by the military specification number, Solder
including
the dash number and surge option letter (E, F or H).
Only
T262 Series Axial MIL–PRF–39003 (CSR21 Style)
Orders should be entered by the military specification number, including the dash number and surge option letter (E, F or H).
(CSR21
Style) C
T
262
050
Capacitance
Rated
Voltage
K
050
(pF)
Tolerance
(VDC)
Capacitance Code Capacitance Rated Voltage
First (pF)
two digits
KTolerance
= ±10%
006(VDC)
=6
010 = 10
First two digits
K = ±10%
006 = 6
015 = 15
010 = 10
specifies number of
020 = 20
015 = 15
zeros to follow.
035 = 35
specifies number of
020 = 20
050 = 50
zeros to follow.
035 = 35
050 = 50
DF (120 Hz
at 25°C)
Capacitance
Tolerance
ESR and Impedance
(100
kHz
25°C)
Rated VoltageatRange
Leakage
DF (120
Hz atCurrent
25°C)
ESR and Impedance (100 kHz at 25°C)
-55°C to 125°C
5.6 – 330 μF at 120 Hz/25°C
J Tolerance
(5%), K Tolerance (10%), M Tolerance (20%)
-55°C
to 125°C
6
–
50
V
5.6 – 330 μF at 120 Hz/25°C
to Part(5%),
Number
Electrical(10%),
Specifi
Table(20%)
JRefer
Tolerance
K Tolerance
Mcation
Tolerance
Refer
to
Part
Number
Electrical
Specifi
cation
Table
6 – 50 V
Tantalum Capacitors
Through-Hole
T550 Axial Polymer Hermetic Seal (PHS) 105ºC and DLA Series
Tantalum
Through-Hole
Capacitors – Hermetically Sealed
Ordering
Information
Hermetically Sealed
Axial
(cont.)
T550 Axial
Polymer Hermetic
Seal (PHS) 105ºC and DLA Series
T
550 (PHS)
B
107& DLA Series
M
T550 Series Polymer Hermetic
Seal
105ºC
025
A
Rated Voltage
(VDC)
Failure Rate/
Design
006025
= 6.3
008 = 8
Rated Voltage
015 = 15
(VDC)
025 = 25
006
040 == 6.3
40
008
050 == 850
015
060==15
60
025
25
075== 75
040 = 40
050 = 50
060 = 60
075= 75
A = N/A
A
B* = Standard
Failure Rate/
reliability
Design
T* = High
Areliability
= N/A
B* = Standard
reliability
T* = High
reliability
Ordering
Information
Capacitor
CaseRange:
Capacitance
Capacitance
μF • Temperature
−55°C to +105°C
Class
TT=
Tantalum
Capacitor
Class
Series
Size
Code (pF)
Tolerance
First 107
two digits
K = ±10%
M
Capacitance
Capacitance
Code (pF)
Tolerance
specifies number of
T=
First zeros.
two digits
K = ±10%
Tantalum
specifies number of
zeros.– Radial Dipped
Tantalum
Through-Hole Capacitors
* Only available on select parts. Refer to part number table for details.
** Only available for failure rate designator A
550
550=
BB
Polymer
Case
Series
Hermetic
Size
Seal
550 =
B
Polymer
Hermetic
Seal
4251
Termination Finish
Surge
Option
T = 100%T tin (Sn)
4251**
4251
plated
= Surge
Surge
Termination
H
= Tin/lead Finish
(SnPb)
current,
Option
solder coated
10 cycles,
T(5%
= 100%
tin (Sn)
4251**
Pb minimum)
-55°C
and
plated
=+85°C
Surge
H = Tin/lead (SnPb)
current,
solder coated
10 cycles,
(5% Pb minimum)
-55°C and
+85°C
T350, T351, T352, T353, T354, T355 and T356 Series
UltraDip
II Polar – toDLA
*Ordering
Only available Information
on select parts. Refer
part number
table for details.
Series
Sleeve Option
Blank = Sleeved
0100 = Unsleeved
Sleeve
Option
7200
= Tape
&
Reel
Blank
Sleeved
7293 &= 7443
=
0100
Ammo= Unsleeved
7200 = Tape &
Reel
7293 & 7443 =
Ammo
DLA Series
** Only available for failure rate designator A
13030
-01
K
A
Tolerance
Testing
S
L
B
Insulation
Lead Length
Level
S = Sleeved
S
U = Unsleeved
Insulation
L =L1.50
inches
(standard)
Lead
Length
S = Sleeved
U = Unsleeved
L = 1.50
inches
(standard)
B = Standard
B
reliability
T =Level
High
reliability
B = Standard
reliability
T = High
reliability
Overview
Ordering
– DLA Series
Drawing Information Capacitance
Surge Current
Number
13030
T
Dash Number
See
-01Part
Number
DashTable
Number
K = ±10%
K
M = ±20%
Capacitance
Tolerance
A = +25°C
A ±
5°C, 10 cycles,
Drawing
Surge Current
after constant
Number
Testing
voltage
See Part
K = ±10%
Aconditioning
= +25°C ±
Number
M = ±20%
5°C, 10 cycles,
Table
after constant
Tantalum Through-Hole
Capacitors – Hermetically Sealed
voltage
T551 Axial Polymer Hermetic Seal (PHS) 125ºC Series
conditioning
T551 Series Polymer Hermetic Seal (PHS) 125ºC
Ordering
Information
μF • Temperature
Performance
Characteristics
T
551
B
Item
107
Capacitor
Case
Performance
Characteristics
OperatingCapacitance
Temperature
Series
Class
T=
Tantalum
Radial Dipped
Size
Code (pF)
551 = Item
B
First two digits
Polymer
represent
Capacitance
Tolerance
Operating
Temperature
Hermetic
signifi
cant figures.
Rated
Voltage
Rangees
Seal
Third
digit specifi
number of zeros.
DF (120 Hz at 25°C)
ESR (100 kHz at 25°C)
Rated Voltage Range
Leakage Current
DF (120 Hz at 25°C)
ESR (100 kHzPackaging
at 25°C)
M
025
A
T
4251
Performance
Characteristics
Capacitance
-55°C to 105°C
Termination Finish Surge Option
Tolerance
(VDC)
Design
20 μF to 820 μF at 120 Hz/25°C *
K = ±10%
006 = 6.3 V
A = N/A
T =Characteristics
100% tin (Sn)
4251 = Surge
Performance
M
= ±20% (10%),
008 =M8Tolerance
V
plated
current,
K Tolerance
(20%)
-55°C to 105°C015 = 15 V
H = Tin/lead (SnPb)
10 cycles,
6 – 75 V
025 = 25 V
solder coated (5%
-55°C and
20 μF to 820 μF at 120 Hz/25°C *
040 = 40 V
Pb minimum)
+85°C
050 =M50
V
K Tolerance (10%),
Tolerance
(20%)
060 = 60
V
Electrical
Specification Table
6 – 75 V
(at rated
voltage
up toElectrical
+85°C and
78% cation
of rated
Refer
to Part
Number
Specifi
Table
Sleeve Option
Blank = Sleeved
0100 = Unsleeved
7200 = Tape &
Reel
7293 & 7443 =
Ammo
According
MIL–PRF–39006
Refer
to Part
Number Electrical Specification Table
(at rated voltage up to +85°C and 78% of rated voltage applied at 105°C)
* Additional case sizes and capacitance/voltage are under development.
Packaging
According MIL–PRF–39006
KEMET does not recommend
storage
aboveCurrent
85ºC.
Leakage
Performance
Characteristics
T350, T351, T352, T353, T354, T355 and T356 Series UltraDip II Polar
Information
Item Range: −55°C to +125°C
KEMET does not recommend storage above 85ºC.
-55°C to 125°C
*©Additional
case sizes Corporation
and capacitance/voltage
are under development. (864) 963-6300 • www.kemet.com
KEMET
T Electronics
35X
A • P.O. Box 5928
105• Greenville, SC 29606
M
035
A
S T2059_T550 • 4/16/2015 2
20 μF to 820 μF at 120 Hz/25°C *
Case
Capacitor
Failure Rate
Termination Finish
Specification
Series
Tolerance
(VDC) (20%)
Size
Class
Capacitance
Tolerance
K Tolerance
(10%), M Tolerance
T
=
350
A,
B,
First
two
digits
M
=
±20%
003
=
3
Not
Applicable
S
=
Standard
7301
7303 = Tape2
BoxRange
SC 29606 (864) 963-6300 • www.kemet.com
T2059_T550 • &4/16/2015
Rated• P.O.
Voltage
6 – 60 V
Tantalum
351
C, D, represent significant K = ±10%
006 = 6
& Reel
352
E,
figures.
Third digitRefer Jto=Part
±5%Number Electrical
010 = 10 Specification Table
7305 & 7317 =
DFF,(120 Hz
at 25°C)
353
G, H, specifies number of (Available on 016 = 16
Ammo
ESR
(100 kHzzeros
at 25°C)
to Part Number
354
J, K,
to follow. Refer special
order) Electrical
355
L, M
Leakage Current
356
035 = 35
(at rated voltage up to +85°C
and 66% of rated voltage applied at 125°C)
050 = 50
Packaging
According MIL–PRF–39006
KEMET does not recommend storage above 85ºC.
* Additional case sizes and capacitance/voltage are under development.
123
• 4/16/2015
1
Tantalum Capacitors
Tantalum Through-Hole Capacitors – Radial Dipped
T368 Series UltraDip II
Through-Hole
Radial Dipped (cont.)
Overview
T363 and T369 Series MIL-PRF-49137/2 (CX02 and CX12 Style)
Ordering
Information
μF • Temperature
Ordering
Information
T
T
35X
35X
Capacitor
Capacitor
Class
Class
Series
Series
Tantalum
Tantalum
369
369
A
A
105
105
M
M
Case
Case
Size
Size
Capacitance
Capacitance Code
Code
(pF)
(pF)
Capacitance
Capacitance
Tolerance
Tolerance
C,
C, D
D
represent signifi
significant
cant
represent
gures. Third
Third digit
digit
fifigures.
specifies
es number
number of
of
specifi
zeros to
to follow.
follow.
zeros
K
K == ±10%
±10%
T
363
A,
B,
First
digits
M
Tantalum
Through-Hole
– Radial
T ==
363
A,Capacitors
B,
First two
two
digits Dipped
M == ±20%
±20%
035
035
Rated
Rated Voltage
Voltage
(VDC)
(VDC)
006
006 == 66
010
010 == 10
10
015 == 15
15
015
020 == 20
20
020
025
025 == 25
25
035
035 == 35
35
050
050 == 50
50
T396 and T398 Series UltraDip III (3 Leaded)
A
A
S
S
Failure
Failure Rate
Rate
Termination
Termination Finish
Finish
Specifi
Specification
cation
Not
Not Applicable
Applicable
S
S == Standard
Standard
7301
7301 &
& 7303
7303 == Tape
Tape
&
& Reel
Reel
7305 &
& 7317
7317 ==
7305
Ammo
Ammo
MIL–PRF–49137/2 (CX02 & CX12 Style)
Overview
CX
CX
02
02
Capacitor Class
Class
Capacitor
CX
CX == MIL-PRF
MIL-PRF
D
D
Series
Series
02
02 == T363
T363
12 == T369
T369
12
Voltage
Voltage
D
D == 66 V
V
F == 10
10 V
V
F
H
H == 15
15 V
V
JJ == 20
20 V
V
K
=
25
V
K = 25 V
M
M == 35
35 V
V
N
N == 50
50 V
V
225
225
Capacitance Code
Code
Capacitance
(pF)
(pF)
First
First two
two digits
digits
represent
represent
signifi
significant
cant
fifigures.
gures. Third
Third
digit
specifi
digit specifies
es
number
of
zeros
number of zeros
to
follow.
to follow.
K
K
Capacitance
Capacitance
Tolerance
Tolerance
K
K == ±10%
±10%
M == ±20%
±20%
M
T368 Series UltraDip II
One
One world.
world. One
One KEMET
KEMET
Information
330
μF •Electronics
Temperature
Range:
−55°C
to +85°CSC
© KEMET
KEMET
Electronics
Corporation
P.O. Box
Box
Greenville,
SC 29606
29606 (864)
(864) 963-6300
www.kemet.com
©
Corporation
•• P.O.
5928
T
Capacitor
Class
T=
Tantalum
4/16/2015
•• 4/16/2015
368
C
106
M
035
A
S
Series
Case
Size
Capacitance Code
(pF)
Capacitance
Tolerance
Rated Voltage
(VDC)
Failure Rate
Termination Finish
Specification
T368
C, D
First two digits
specifies number of
zeros to follow.
M = ±20%
K = ±10%
006 = 6
010 = 10
015 = 15
020 = 20
025 = 25
035 = 35
050 = 50
Not Applicable
S = Standard
7301 & 7303= Tape
& Reel
7305 & 7317 =
Ammo
11
T396 and T398 Series UltraDip III (3 Leaded)
Information
T
39X
A
105
M
035
A
© Capacitor
• P.O. Box 5928 • Greenville, SC
29606 (864)Rated
963-6300
• www.kemet.com
Capacitance
Voltage
Case
Failure Rate
Series
Tolerance
(VDC)
Size
Class
T=
Tantalum
T396 Straight
Leads
T398 Straight
Leads
A, B,
C, D,
E, F,
G, H,
J, K,
L, M
First two digits
specifies number of
zeros to follow.
M = ±20%
K = ±10%
(Special
order only)
003 = 3
006 = 6
010 = 10
016 = 16
020 = 20
025 = 25
035 = 35
050 = 50
Not Applicable
S
Termination Finish
S = Standard
• 4/16/2015
Specification
1
7301 & 7303 = Tape
& Reel
7305 & 7317 =
Ammo
124
• 4/16/2015
1
Tantalum Capacitors
Through-Hole
Molded Axial
Tantalum Through-Hole Capacitors – Molded Axial
Tantalum
Through-Hole
Capacitors
– Molded
Axial and CX05 Style)
T322
and T323
Series MIL–PRF
49137/1
& 5 (CX01
T322 and T323 Series MIL–PRF 49137/1 & 5 (CX01 and CX05 Style)
T322 & T323 Series MIL–PRF–49137/1
and 5 (CX01 & CX05 Style)
Information
T
32X
32X
T
Capacitor
Class
Capacitor
Class
T=
Tantalum
T=
Tantalum
Tantalum
A
474
M
035
A Capacitance
M
Case
Series
Size
(pF)
Tolerance
Case Capacitance Code Capacitance
Series
Size
(pF)digits
Sub-Miniature,
A,
B,
First two
JTolerance
= ±5%
Molded,
Polar,
C,
signifi
cant KJ == ±10%
Sub-Miniature,
A, D,
B, represent
First two
digits
±5%
Solid
Tantalum.
E, FD, represent
figures. Third
digit
Molded,
Polar,
C,
signifi
cant M
K == ±20%
±10%
Insert
es Third
number
of M = ±20%
Solidappropriate
Tantalum.
E, F specifi
figures.
digit
number
to replace
zerosestonumber
follow. of
Insert appropriate
Through-Hole
Capacitorsspecifi
– Molded
Radial
letter ""X""
= 322
number
to replace
zeros to follow.
or
323
(CX01
or
letter ""X"" = 322
CX05).
or 323
(CX01 or
CX05).
A
S
A
S
Rated035
Termination Finish
(VDC)
Product
Only
Rated Voltage Failure Rate/Military
Termination Finish
Product
Only
002(VDC)
=2
Not
Applicable
S = Standard
004
=
4
002 = 2
Not Applicable
S = Standard
006
004 == 64
010
006==10
6
015
010 == 15
10
020
015 == 20
15
025
020 == 25
20
035
=
35
025 = 25
050
035 == 50
35
050 = 50
C
C
Specification
Specification
(When necessary)
Reeling
per EIA
(When necessary)
Specification
Reeling
per EIA
RS-296
Specifi
cation
RS-296
T340 Series Precision Molded Radial Lead
MIL-PRF-49137/1/5 (CX01 & CX05 Style)
CX
Overview
CX
Capacitor Class
Capacitor Class
CX = MIL-PRF
CX = MIL-PRF
05
05
Series
Series
01 = T322
05
01 == T323
T322
05 = T323
Molded Radial
D
D
Voltage
Voltage
D=6V
FD==10
6 VV
HF == 15
10 VV
JH==20
15VV
KJ == 25
20 V
V
M
V
K == 35
25 V
NM==50
35VV
N = 50 V
225
225 Code
Capacitance
(pF) Code
Capacitance
K
K
Capacitance
Tolerance
Capacitance
(pF)digits
First two
K = Tolerance
±10%
represent
M
First
two digits
K == ±20%
±10%
signifi
cant
represent
M = ±20%
figures.
Third
signifi
cantdigit
number
fispecifi
gures.esThird
digit
ofspecifi
zerosestonumber
follow.
of zeros to follow.
Tantalum Through-Hole Capacitors – Molded Radial
Performance
Characteristics
T330 Series Precision Molded Polar
T330 Series Precision Molded Polar Item
Ordering
Information
μF • Temperature
Item
-55°C to 125°C
T
Capacitor
Class
T=
Tantalum
-55°C
to 125°C
Range104 0.1
– 330
μF @M
120 Hz/25°C 035
330 Rated Capacitance
B
A
Rated
Capacitance
Range
– 330 Capacitance
μF(5%),
@ 120
Hz/25°C
Case Tolerance
Rated
Voltage
Capacitance
J0.1
Tolerance
K Tolerance
(10%),
M Tolerance (20%)
Series
Failure Rate
Size Tolerance
Tolerance
(VDC)
Capacitance
J
Tolerance
(5%),
K
Tolerance
(10%),
M Tolerance (20%)
Rated Voltage Range
2 – 50 V
Radial Lead
A, B,
First two digits
K = ±10%
006 = 6
Not Applicable
2cant
– 50toVPart
Precision Rated
DVoltage
M =Number
±20% Electrical
010 =Specifi
10 cation Table
DFC,(120
Hz represent
@ Range
25°C) signifi
Refer
S
Termination Finish
Specification
S = Standard
7301 = Tape & Reel
(Solder-coated
7305 & 7317 =
Molded Polar DF (120 Hz @
figures.
digit to Part
J = Number
±5% Electrical
015 = Specifi
15
nickel)
Ammo
25°C)ThirdRefer
Refer
cation Table
Table (for reference
ESR
and
Impedance
(100
kHz
@
25°C)
to
Part
Number
Electrical
Specifi
cation
only)
Solid Tantalum
specifies number of
(available on 020 = 20
T = 100% tin (Sn)
request)
025 =Specifi
25 cation
plated
ESR and Impedance (100 kHz @zeros
25°C)to follow.
Refer to
to Part
Part
Number Electrical
Electrical
Specifi
cation Table
Table (@
(forrated
reference
only)
Refer
Number
voltage
up to +85°C and 2/3 of rated
Leakage Current
035 = Specifi
35 cation Table (@ rated voltage up to +85°C and 2/3 of rated
voltage
at 125°C)
Refer toapplied
Part Number
Electrical
Leakage Current
voltage applied at 125°C) 050 = 50
T340 Series Precision Molded Radial Lead
Information
330
μF • Temperature
Performance
Characteristics
T
340
Item
A
105
M
035
A
S
Case
Capacitor
Failure Rate
Termination Finish
Specification
Series
Tolerance
(VDC)
ClassOperating Temperature Size -55°C to 125°C
© KEMET
5928
•@Greenville,
SCM29606
(864) 963-6300
• 4/16/2015
TRated
= Electronics
RadialCorporation
Lead
First
digits
= ±20%
Not Applicable T2039_T322_AXIAL_T323
S = Standard
7301
= Tape &
Capacitance
RangeA, •B,P.O.
0.1Box
– 220
μFtwo
120 Hz/25°C
Precision
C, •D,P.O. Box
represent
cant SC
(standard)
(Solder-coated
Reel• 4/16/2015
© Tantalum
KEMET Electronics
Corporation
5928 •signifi
Greenville,
29606 (864) 963-6300
T2039_T322_AXIAL_T323
Molded
figures. Third
±10%
010 =J10
copperweld)
7305 & 7317 =
Capacitance
Tolerance E, F M Tolerance
(20%)digit
standard,K K= Tolerance
(10%),
Tolerance (5%) special order
Polar Solid
specifies number of
J = ±5%
015 = 15/16
Ammo
6 - 50Vzeros to follow.
Rated Tantalum
Voltage Range
(available on 020 = 20
request)
= 25
DF (120 Hz @ 25°C)
Specification025
Table
035 = 35
ESR and Impedance
= 40(for reference only)
Refer to Part Number Electrical Specification040
Table
(100 kHz @ 25°C)
050 = 50
Leakage Current
2
2
Refer to Part Number Electrical Specification Table (@ rated voltage up to +85°C and 2/3 of rated voltage applied at 125°C)
125
• 4/16/2015
1
Tantalum Capacitors
Through-Hole
Molded Radial (cont.)
T370 and T378 Series Micron MIL-PRF-4913716 (CX06 Style)
Capacitance Range: T370: Ordering
0.68 to 220Information
μF, T378: 2.2 to 220 μF • Temperature Range: −55°C to +125°C
T
T
Capacitor
Capacitor
Class
Class
T=
T=
Tantalum
Tantalum
D
D
475
475
Case
Case
Size Capacitance Code (pF)
Size
C, D,
First two digits
C,
First two
digits
E, FD, represent
signifi
cant
E, F
represent
signifi
cant
figures. Third
digit
figures.
digit
specifi
es Third
number
of
specifi
zerosestonumber
follow. of
zeros to follow.
M
M
Capacitance
Capacitance
Tolerance
Tolerance
M = ±20%
±20%
KM==±10%
±10%
JK==±5%
±5% -20%
LJ == 40%,
L = 40%, -20%
035
035
Rated Voltage
Rated
Voltage
(VDC)
(VDC)
003 = 3
003 == 43
004
004 == 6.3
4
006
006==10
6.3
010
010 == 15
10
015
015 == 20
15
020
020 == 25
20
025
025 == 35
25
035
035 = 35
A
A
Failure Rate
Failure Rate
Not Applicable
Not Applicable
Capacitor Class
Capacitor Class
CX = MIL-PRF
CX = MIL-PRF
06
06
Series
Series
06 = T378
06 = T378
D
D
Specification
Specification
7301 = Tape &
7301Reel
= Tape &
7305 Reel
& 7317 =
7305
& 7317 =
Ammo
Ammo
Voltage
Voltage
A=2V
A
=
2
B = 3 VV
CB == 43 VV
DC == 64 VV
6 VV
FD==10
10 VV
HF == 15
15VV
JH==20
20 V
V
KJ == 25
K == 35
25 V
M
V
M = 35 V
225
225
K
K
Capacitance Code
Capacitance
Capacitance
Capacitance
(pF) Code
Tolerance
(pF)
Tolerance
First two digits
K = ±10%
First
two digits
K == ±20%
±10%
represent
M
represent
M = ±20%
signifi
cant
significant
figures.
Third
figures.
Third
digit
specifi
es
digit specifi
es
number
of zeros
number
of
zeros
to follow.
to follow.
126
S
S
Termination Finish
Termination Finish
S = Standard
S = Standard
(Solder-coated
(Solder-coated
nickel)
nickel)
MIL-PRF-49137/6 (CX06 Style)
CX
CX
37X
37X
Series
Series
370
370
378
378
• 4/16/2015
• 4/16/2015
1
1
Corporate Headquarters
KEMET Corporation
2835 KEMET Way
Simpsonville, SC 29681
USA
864.963.6300
www.kemet.com
Countries and Areas listed below represent KEMET operations
throughout the world.
Bulgaria
China
Finland
France
Germany
Hong Kong
India
Indonesia
Italy
Japan
Macedonia
Malaysia
Mexico
Portugal
Singapore
South Korea
Sweden
Taiwan
United Kingdom
USA
Electronic Components
©2015 KEMET. All rights reserved.
COIG0415

Capacitor Ordering Information Guide

Transcription

Similar documents

Elektrostatika: Hukum Coulomb

AUXILIARY POWER SUPPLY (APU) – MASS TRANSIT 45kVA /5kW

oil-filled capacitors

smart pac iii

Audience Auricap Capacitor Applications

Deltaweld® Series

GFC SERIES Low ProFileTM 400 Hz AND 28 VDC