Drafts-for-Specialty-Weaving

Transcription

D
afts fo
ing
Drafts
for Specialt
Specialty Wea
Weaving
Using:
Drafts for:
Inkle Weaving
Weaving Software
Card/Tablet Weaving Office Software
Drawloom
Graphics Software
Pick-up Weaving
Cross Stitch Software
Kumihimo
Specialty
p
y Programs
g
Drafts for Specialty Weaving
©Judie Eatough 2008
Inkle Weaving
Wea ing
1. Come On pattern
woven by Beth at age 7
2. Pick-up
c up pattern
patte
threaded: 2 thin, 1 thick plus borders
3. Pick-up pattern
3-thread floats on stripes
4. Shoelaces
Aglets woven as tube; Elmer's glue
15 ends 5/2 Pearl cotton
Woven Bands
Left to Right
1. Shoelace 15 ends 5/2 Pearl
cotton
2. Narrow band with color
design
3. Band from Mexico with
warp: 1thick
1 hi k end
d and
d 2 thin
hi
ends pick up patterning.
4. Pickup design on alternate
stripe threading. 3 thread
floats.
floats
5. Band woven with 5/2 Pearl
Cotton for the thin warp
and Sugar and Cream
cotton for the thick ends.
Wea
ing Soft
ae
Weaving
Software
PixeLoom
PixeLoom has a warpfaced option that
allows you to work
with 2 to 4 colors in
the warp. Two
colors can be used
to draft Inkle bands.
“Come-On”
“C
O ” pattern
tt
Mary Meigs Atwater, Byways in Handweaving
Wea
ing Soft
ae
Weaving
Software
Fiberworks
Fiberworks includes a cloth simulation for
Rep/warp-faced drafts.
Weaving Software
W
It P
WeaveIt
Pro
WeaveIt has a Warp-faced display choice.
Office Software
(E
cel)
(Excel)
Using spreadsheets or
tables is another way to
d i Inkle
design
I kl bands.
b d
Cells can be made tall
and narrow to simulate
inkle weaving. Pick-up
designs
g can be planned.
p
“Fish” pattern
Mary Meigs Atwater, Byways in Handweaving
G aphics Soft
Graphics
Software
ae
Often two drafts
Of
d f can be
b
pasted together to create the
final draft yyou need.
Started in WeavePoint, used
Paint and PaintShop Pro to
create the final offset Inkle
draft.
Notes:
In Paint I choose the transparent background before
copying
copying.
Save graphics files as tif files to preserve colors. JPG files
are ‘lossy’, The colors are averaged in an area. For graphics
with grids and black lines tif , gif, or pngs are non-lossy file
formats.
P i t
Paint
PaintShop Pro
Cross Stitch Software
Inkle Color Patterns
1. Edges are usually the same
2.
3
3.
4.
5.
6.
7.
8.
color as the weft. This hides
the weft. A contrasting color
can be used for design.
Solid color/solid color stripes
D
Dots.
Stripe –rows will be offset
Stripe – a little wider
Color changing pattern
Ladder
Basis for many pickup patterns
1.
The center is alternating color
stripes with a border
9 Basis
9.
B i for
f pickup
i k patterns
tt
1.
The center is two fine ends, 1
heavy end. Usually an odd
number of colored ends are
used. The heavy ends could
be ttwo
o end
ends of color
olo on the
same ‘shaft’. Border
C oss Stitch Soft
Cross
Software
ae
Fast and easyy to use with
lots of color pallets.
Copy and Paste
f
functions
h
help
l create
the designs quickly.
Adjust the size of the
stitch from square to tall
and thin. Also try using
symbols. You can also
create and print graph
paper for design work.
Pattern Maker Pro
PCStitch Pro
G
id ‘N Wea
eIt
Grid
WeaveIt
This new program
will let you quickly
d
draw
a draft
d ft ffor an
inkle band. The
tools make it easy to
do.
DB Bead
DB-Bead
With off-set rows, you can
quickly see how a 2 thin/
b k
background,
d 1 thick/
thi k/
pattern thread draft
looks.
looks
http://www.brunoldsoftware.ch/dbb.html
DB Bead and Graphics
DB-Bead
G aphics Program
P og am
Using a graphics
program, I added
fl t and
floats
d
background to show
a pick
pick-up
up design.
design
TurnStyler
This program can use cards with 2-holes – Inkle weaving. You can plan pickup drafts with this
software. Or create a blank graph to use. This is the draft for pickup for a 2 thin, 1 thick warp. By
skipping the extra thins it is easier to see the patterning.
patterning You can turn off the slant and have a good
design board. Inkle-2.cwv would be the threading draft while Inkle-2b.cwv is the design draft. You
can install TurnStyler and open the draft files in TurnStyler. (TurnStyler-drafts folder. The actual
program is in the software folder.)
T nSt le
TurnStyler
The fish design can be
designed using the
t
turn
grid
id method.
th d
Starting and Ending Bands with fringe (or braids,
braids etc)
To begin:
Weave the first pick and leaving a tail a little
longer than the width of the band.
Tuck the tail into the second pick. This tail can
be trimmed even with the band width.
To end:
In the next to last pick, place a needle or yarn
loop so that the eye or loop is on the side
where the last pick will finish.
Weave last
l
pickk and
d cut off
ff lleaving a tail.
l
Tuck the tail into the eye or loop and pull the
tail back through the next to the last pick.
Trim the end.
CardWeaving
g
Narrow warp faced bands
Color Designs
Two way turning bands
Double Faced Bands
Oth Structures
Other
St t
10 minute warp
Pebble weave with cards
Weaving is the same as for inkle bands
Drafts for card weaving — TurnStyler
Links:
http://weavershand.com/ Instructions, supplies, galleries, software.
The links on this page are excellent – some are old and broken.
Look for Turn Styler,
Styler Malarky Crafts
Crafts’ TabletWeaver,
TabletWeaver and Guntrum
Guntrum’ss Weaving
Thingy
Inge
g Dam’s web site http://www.ingedam.net/gal1a.html
p //
g
/g
www.Handweaving.net has the digital archive of books and monographs. I
have included several on this CD. Mary Atwater’s monographs are excellent
Drawloom/Pick-up Designs
Weaving Software
Interactive Drawdowns
In most programs enter a straight
draw threading and a straight draw treadling or go to liftplan mode. If
you want
a tb
bilateral
ate a sy
symmetry
et y e
enter
te a po
pointt d
draw.
a
Center
WeavePoint draft: Point draw; warp colors at point and mid-sides; threading hidden
Drawloom/Pick-up Designs
Weaving Software
Design Grids
Draw the design you
would
ld like
lik and
d then
th
analyze it if desired.
Many programs will
import a graphics file.
Wea
eDesign
WeaveDesign
Set up WeaveDesign for double harness and
choose the blocks needed for your design. Import
design
g and resize if necessary.
y
Series VII, No. 14
Mary Meigs Atwater’s
Recipe Book CD
Used with p
permission.
Wea
eDesign
WeaveDesign
On the design board, trace one repeat of the
pattern, editing as desired.
WeaveDesogn
(a donationware program)
Print
P
i the
h design
d i
with numbers to
p with
help
drawcords or
pick-up
counting
WeavePoint Complex
Drafting
p
g
Complex Drafting is an addition to WeavePoint for drawloom
designs. Import a bmp file or create a design and then
quickly add a ground weave.
K mihimo
Kumihimo
Create circles in a graphics program and save.
Color can fill the circles and they can moved into position.
Arrows can be added in graphics or presentations programs.
Braid Runner
http://www.rosalieneilson.com/braid_runner.htm
Explore the design
possibilities of 14
different 8
8-bobbin
bobbin
braids.
Change color by
clicking mouse
button on braid
diagram or marudai
stand schematic.
Takadai Designs
Plain Weave and
twill weave can be
created in weaving
software. The
design can then be
turned 45°.
Takadai designs
Colors can be added in the weaving software.
Graph paper can be made from these drafts.
TakaD
aft
TakaDraft
This p
program
g
is
for double weave
designs for the
takadai.
k d

Drafts-for-Specialty-Weaving

Transcription

Similar documents

Susan Hill - Chiricahua Gallery

(Nariño)´s weaving

Untitled - brand[trade]

Featured Clover Products

FOR SALE IN THE PANORAMA WEAVING STUDIO 4

tayenebe - National Museum of Australia

interview with Ellen on L.I.S.A.

Summer 2013 - Cook County Health and Hospitals System

April 2015 - AZ Desert Weavers and Spinners Guild

For more information, contact Pat Nance at 817.602