Brochure - Flaman Agriculture

EQUIPMENT
AGRICULTURAL
ROBUST DETAILS. LEGENDARY PERFORMANCE.
UNPRECEDENTED CUSTOMER SERVICE.
Since 1962, Degelman Industries has pioneered the perfect balance of engineered toughness and intelligent design.
The result is outstanding equipment that exceeds expectations and outperforms. We achieve this through meticulous
design and vigilant customer service. Every day, the designers in our state-of-the-art research and development
facility work tirelessly to provide new and innovative solutions to fit the ever-growing need of performance, quality
and durability for today’s agricultural equipment. And our Customer Service Centre’s goal is to make sure customers
are taken care of no matter how long ago our equipment was bought. Because if it has our name on it, we expect
nothing short of optimal performance.
STATE-OF-THE-ART R&D AND MANUFACTURING.
CONSTANT PRODUCT IMPROVEMENTS.
At Degelman, we constantly improve and design new products right here in our state-of-the-art manufacturing
facility. That way, we have complete control over the quality of our products, from start to finish. We continually
upgrade and invest in our facility with the latest technology—such as computerized and controlled equipment that
can cut steel, drill holes, mill and robotically weld with precision. In addition, our research and development facility
and design team is located right beside our manufacturing facility. So, if we hear from our customers of any problems
in the field with our products, we react right away and fix the problem at the source. It’s all part of our Degelman
philosophy to always evolve, always listen and always improve.
STRAW
HEAVY HARRO
THE INDUSTRY STANDARD.
The Degelman Strawmaster® pioneered the heavy harrow industry. It is the revolutionary machine designed to tackle
enormous straw problems. It is simple, durable and effective. With 26 inch long tines placed in rows of four or five, and set in
large ten foot wide by six foot deep sections, this machine is at the forefront of modern straw management. The Strawmaster®
will shatter straw, control weeds, rake flax straw, and incorporate seed and chemicals.
“ One of the best investments I’ve made. . . gets rid of the straw on the stubble field and pre-works the
summerfallow before seeding. . . Works the land without drying it out and controls weeds.
I have also used it to pack and level after seeding. ” - Ray Francis, Herbert, SK
GROUND CONTOURING
FEATURES & SPECIFICATIONS
Under float or under pressure, the harrow
Model Strawmaster 7000 Series
sections are designed for flexibility. The spring
Widths Available 30’, 50’, 62’, 70’ & 82’
bars are positioned along the sides of the
Transport Width
14’-7”
Trailer Frame
4” x 8”
Section Frame
2” x 4”
harrow frame providing an even distribution of
pressure to the frame. The spring bars can then
flex in response, rising over hills and falling
into hollows.
Harrow Frame
8” x 8” beam
Tine Specifications (Spacing)
5 Bar - 18” Centres
4 Bar - 24” Centers
Tine Sizes
5/8” x 26” (Straight) 9/16” x 26” (Straight)
Tine Angle 5° to 65° Mechanicallyor Hydraulically
Tine Replacement
Easy Drop-out
Transport
FOUR OR FIVE BAR
SECTIONS
The tine bar sections are available in
either a four bar section with 5/8” x 26
inch straight tines or a five bar section with
either 5/8” or 9/16” straight tines.
Hyd. Cylinders (Main-Standard)
Five Bar - 9/16” or 5/8” x 26” Tines
STRAWMASTER
ROWS
BREAKING &
SPREADING STRAW
The primary purpose
PATENTED SPRING BAR
CONTROL
At the heart of every Strawmaster® is the
simple torsional spring bar design. These twin
spring bars allow in-cab hydraulic control
by applying pressure from zero to 1900
pounds per harrow section. As well, the spring
bars support the entire harrow in transport.
Advantage: The Strawmaster® has zero
moving parts on the harrow section.
CHEMICAL & SEED
INCORPORATION
Incorporation is a natural for
of the Strawmaster®
is to breakup and spread
most types of straw residue efficiently.
For most farming practices, speeds of
up to 12 m.p.h. can be attained.
RAKING
the Strawmaster®. By
adding a Valmar Granular
Applicator, both granular
chemicals and seed are
evenly distributed.
FIELD PACKING
The Strawmaster® is quickly
Moderate
becoming the most popular
field packing can
be easily achieved by
machine for raking flax straw. It can
maximize holding capacity by applying
lowering the machine and leaning back
pressure through the spring bar control.
the tines.
3-1/2” x 31”
Hyd. Cylinders (Beam Lift-Optional)
3” x 8”
Hyd. Cylinders (End Wheels-Optional)
2-1/2” x 8”
Hyd. Cylinders (Tine Angle-Optional)
Rephasing
Tires (Main Cart)
16.5L x 16.1
Tires (End Wheel)
9.5L x 15 Hi-Way
Model
Four Bar - 5/8” x 26” Straight Tines
Autofold Wingback
Horsepower Minimum
Ideal
30’
100 h.p.
150 h.p.
50’
150 h.p.
200 h.p.
62’
180 h.p.
250 h.p.
70’
200 h.p.
300 h.p.
82’
300 h.p.
400 h.p.
ON THE GO HYDRAULIC
CONTROL
Optional hydraulic rephasing cylinders are
available that replace our standard gear driven
jacks. These cylinders help to synchronize
the angle adjustment and provide consistent
pressure for every section.
LANDROL
NORTH AMERICA’S NUMBER ONE LANDROLLER.
Without a doubt there are more Degelman rollers out there than any other roller. Literally thousands of customers from
inexperienced operators from the rental market to large scale corporate farms depend on Degelman. Degelman rollers are
simple, low maintenance machines that stay in the field. Any other roller is really just a compromise as Degelman has been
improving these rollers year after year for twenty years. Frame tubing is large, heavy and reinforced, heavy bearings are
oversized and the transport is simple and safe. Degelman Land Rollers are the ideal machines
for safe harvesting of short stature crops, peas, lintels, lodged pulse crops, and
soy bean. The 36” drums are stronger, roll easy and is the
optimum size to keep fields smooth and level.
PRE/POST-EMERGENCE ROLLING
Used as both pre-emergent and early stage post-
FEATURES & SPECIFICATIONS
Model
Width
Weight
Transport
emergent applications, Degelman rollers work
LR7651
51’
18,007 lbs.
14’
especially well under drought conditions. Field
LR7645
45’
16,733 lbs.
14’
LR7640
40’
13,824 lbs.
14’
LR7634
34’
14,400 lbs.
14’
LR2036
20’
7,840 lbs.
8’
peas and lentils may be rolled after emergence,
although pre-emergence rolling is preferred.
When faced with the choice to either spray early
or roll early, growers should know that spraying
first is recommended instead of rolling. Early
weed removal, especially under higher weed
pressures, will result in higher yields.
HEAVY DUTY AND
BUILT TO LAST
The rigid reinforced frame is made
out of six inch structural tubing. The
drums are manufactured from 36
inch diameter pipe with over-sized
shafts and bearings. Extra heavy duty cross
joints and high quality cylinders and bearings
Frame
6” x 6” x 1/4”
Pole
Pivot Frame
6” x 4”
6” x 6” x 1/4”
Pins
2” Dia.
Roller Drum ( .46 - .60 wall)
36” Dia.
Drum Shafts (Impact Resistant)
2-7/16” Dia.
Hydraulic Cylinders (main) 3-1/2” x 16”
Hydraulic Cylinders (end wheel)
3-1/2” x 16”
Shaft Bearings
Long Life
Mud Scrapers
Standard
Autofold
Standard
Safety Lights
Standard
Floating Hitch (20’ Roller - N/A)
Standard
“ When we purchased our roller, we primarily
based our decision on other growers’s
experiences. The feedback from growers plus
our own experiences with landrollers indicated
that this was the best commercially available
landroller on the market.”
are just a few of the standard features.
- Lee Gregory, Fisher Branch, MB
SIMPLE AND SAFE TRANSPORT
20 FOOT SINGLE-DRUM
LANDROLLER
TRI PLEX
OLLER
WHY 36” IS BETTER
For twenty years Degelman produced 36”
The ease of transporting this roller from
diameter drums and for a reason. They
working width to a transport width of 14
work and are the ideal diameter for rolling
feet (without operators needing to leave the
resistance, packing pressure and strength.
tractor cab) makes it the safest in transport
Bigger isn’t always better. A smaller drum is
of any land roller available.
stronger when you are pounding rocks down
and provides 5% more packing pressure than
a 42” drum. The 6x6” HSST wrap around
frame is also that much stronger. One more
reason why Degelman is the most popular
roller on the market.
The LR2036 was specially designed for specialty
crop producers who find our standard rollers too
large for their farming operation. The
LR2036 weighs approximately 7480 lbs. and
measures 20 feet in working
position. With hydraulic fold
capabilities, it easily transforms to
a narrow eight foot transport width, making this
machine safe and simple
to transport. Its 36 inch diameter drum
incorporates the same heavy-duty features as our
triplex rollers such as heavy-duty cylinders, and
oversized shafts and long life bearings.
LANDROL
ANY OTHER ROLLER IS A COMPROMISE.
Degelman Five Plex rollers are built like no other and made for big operators that cannot afford any down time. The robust
frame, oversized commercial no-maintenace bearings and simple straight forward design is the accepted standard by serious
operators. Drum overlap has to be done right. Competitors will try to disguise overlap with small secondary drums causing
unequal pressure, unnecessary complexity, moving parts and bearings.
Degelman drum overlap is simple and built into one heavy duty design.
Inexperienced operators from the rental market to large scale corporate farms depend on Degelman. Degelman Five Plex
rollers are simple, low maintenance machines that stay in the field. Frame tubing is large, heavy and reinforced. Bearings
are extreme commercial duty and oversized. Transport is simple and safe. Cross joints are massive. The
36” drums are stronger, provide more packing pressure, roll easy and are the optimum size to keep
fields smooth and level.
FEATURES & SPECIFICATIONS
FLEXIBILITY FOR ROUGH TERRAIN
Model
Width
Weight
Transport
LR8080
80’
28,138 lbs.
15’
LR8064
64’
22,792 lbs.
15’
Wing Frame
8” x 12” x 1/4”
Hitch
8” x 4” x 1/4”
Pins
2” Dia.
Roller Drum ( .46 - .60 wall)
36” Dia.
The unique “floating hitch” system provides the
Drum Shafts (Impact Resistant)
2-7/16” Dia.
LR8000 series with more flexibility while in the
Hydraulic Cylinders (Hitch) 3” x 8”
field position. The hydraulic cylinders set on
Hydraulic Cylinders (Lift)
3-1/2” x 16”
“float” allow the roller to move freely over rough
Hydraulic Cylinders (Wing Assist)
3-1/2” x 16”
terrain without being restricted by the hitch.
Tires (Center Frame - dual wheels)
9.5L x 15 Hi-Way
Tires (Wing) 235/75R -17.5-16/18 PLY
FIVE PLEX
OLLER
Shaft Bearings
Extreme Duty
Mud Scrapers
Standard
Autofold
Standard
Safety Lights
Standard
Floating Hitch Hydraulic
HEAVY DUTY AND BUILT TO LAST
The rigid frame is made out of eight inch
structural tubing. The drums are manufactured
from 36 inch diameter pipe with over-sized
shafts and bearings. Extra heavy duty cross
joints and high quality cylinders and bearings
are just a few of the standard features
incorporated into this machine.
EXTREME DUTY
NO MAINTENANCE BEARINGS
These extreme duty, double-row, spherical
bearings are proven through years of
performance in applications ranging from marine
to mining. The sturdy one-piece flange
unit and bearing insert is completely assembled,
sealed and lubricated
in clean factory environments.
SWING-ARM
WING ASSIST
To allow for a smoother
transition to the field
The phosphate coated insert
bearing provides excellent
corrosion protection.
Single lip contact
position the LR8000
seals mounted
Series unique design
in the outer
includes a hydraulic
Swing-Arm to easily
separate the two roller
wings.
ring of the
bearing ensure
superior sealing
under contaminated
conditions and allow
higher misalignment
capability.
SIGNATUR
ROCK PICK
ANYTHING ELSE IS A COMPROMISE.
The Signature™ Series Rock Pickers are used in countries all over the globe and in every type of field condition imaginable. Degelman Signature™
Series Rock Pickers are top of the line machines - designed for the most demanding rock removal applications day in and day out. These machines are
ideal for rock windrows and extreme-duty picking applications.
A Rock Solid Philosophy - In 1963 Wilf Degelman created his first rock picker and an unrivalled company philosophy: “The fewer number of parts and
complexity the better. And when you build something, build it right, build it heavy and build it to last from top to bottom.“
This is the same philosophy we use in every piece of machinery we make to this very day.
COMPRESSION SPRING REELS
FEATURES & SPECIFICATIONS
High strength compression spring reels give the
Model
Signature™ 6000
Signature™ 7200
Signature™ Series unprecedented durability.
Working Width
11’
12’
From a
Grill Width
60”
72”
Transport Width
9’-4”
10’-4”
Main Frame
6” x 6” x 1/4”
6” x 6” x 1/4”
Height
6’-6”
6’-6”
Length
14’
14’
Weight
5099 lbs.
6076 lbs.
Capacity
2 cu. yds.
3 cu. yds.
Drive Hydraulic/PTO (540)
Hydraulic/PTO (540)
Hydraulic Cylinders
3” x 31”
3” x 31”
H.P. Range
70 to 180 h.p. 70 to 180 h.p.
These large high flotation tires are standard
Tires
16.5L x 16.1 16.5L x 16.1
equipment used to reduce soil compaction
Chain
#80 H.D.
#100 H.D.
small rock
to a huge
boulder, it can
handle any type
of job.
16.5L x 16.1 FLOTATION TIRES
while carrying those heavy loads.
GRATED HOPPER BOTTOM
Paddles
3
6
Paddle Teeth Hard Surfaced Hard Surfaced
Tines (c/w replaceable grill tips) C1045
C1045
Spring tine steel straps in the hopper are
engineered to bounce back into shape.
SOLID SHAFT TINES WITH
REPLACEABLE GRILL TIPS
The grill is easily maintained with replaceable
tips and provides six feet of clean sifting and
trouble free performance. That means less
downtime and longer life.
ATURE SERIES
®
CKERS
ROCK GUARD
This is a standard feature which stops rocks
from spilling and allows picking at a faster
speed. It also loads from the back to the front,
filling the bucket to maximum capacity.
HYDRAULIC SWING
POLE OPTION
This hydraulic swing pole option allows the
picker to be easily maneuvered in both working
and transport positions.
“Glad to see lots of steel on your 7200 picker
just like the rest of your products.
The picker works excellent on breaking, the
hydraulic drive is a good way to go on the
roots.”
- Ron Lamb, Wishart, SK
ROCK DIGG
PRONG PIC
THE BEST SOLUTION FOR BIG ROCK HANDLING.
Used for years by professional landscapers, contractors and farmers, the Degelman Prong Rock Picker and Digger are designed to clear big stones and
boulders for selective rock picking. These proven rugged machines are ideal for land clearing and reclamation applications.
“ Several of my neighbours are using the Degelman Rock Digger with very impressive results. I’ve seen huge rocks extracted with this machine . . . It will
definitely make my land safer for my machinery and will increase its value. ” - Kent Ableidinger, Kensal, ND
PRONG PICKER R570P
FEATURES & SPECIFICATIONS
The R570P Prong Rock Picker has tremendous
Model
strength for a small machine. This fork-type
Working Width
rock picker is ideal for picking anything from a
Grill Width
two pound stone to a 3000 pound boulder.
PRONG PICKER - R570P
9’-4”
60”
Transport Width
8’-9”
SIMPLICITY. One hydraulic lever works both
Main Frame
the operation of the grill for picking as well as
Height
the hopper for unloading.
Unloading Height
CAPACITY. The prong is equipped with a
1-1/2 cubic yard capacity hopper.
2” x 8-1/2”
3’-6”
42”
Length
13’-6”
Weight
2576 lbs.
Capacity
1-1/2 cu. yds.
VERSATILITY. There are three hydraulic settings
Hydraulic Cylinders
that operate the fork, providing operators with
Tires
their choice of power or speed.
Grill Tines
1” x 2”
Hitch
Bolt-on
DURABILITY. The entire machine is a simple
2-1/2” x 31”
12.5L x 15
forklift design with one moving part.
PRONG PICKER
R570P
The machine
incorporates spring steel
tines that won’t bend
or break, and will last a
lifetime. The mainframe
is constructed with a
double-tubing design,
while the high quality
twin Degelman hydraulic
cylinders provide the power.
GGER &
ICKER
FEATURES & SPECIFICATIONS
ROCK DIGGER RD320
SPRING STEEL DIGGING TEETH
The Degelman RD320 is a trouble-free
These hard surfaced digging teeth are two
and versatile machine. Besides digging out
inches thick. This means the teeth won’t bend,
submerged rocks, it can grab, lift, and transport
won’t break, and will last a lifetime. The teeth
boulders. The RD320 includes these rugged
are angled to allow for easy gliding into the soil
features:
while the hydraulics are in float position.
POWERFUL CYLINDERS
SERRATED GRABBING TEETH
We’ve provided a powerful
5” x 24” hydraulic cylinder for
These serrated grabbing teeth allow for better
gripping of rocks.
Model
ROCK DIGGER - RD320
Width
8’-6”
arms have an independent
Length
10’-4”
3” x 16” hydraulic cylinder
Weight
2400 lbs.
for grabbing which holds the
50”
rock in transport. This means
inches. The benefits of having
250 h.p.
large horsepower tractors are
four teeth are to provide
unnecessary as the RD320 has
extra grip, better control and
Shank Clearance
Max H.P.
Tires
12.5L x 15
digging and lifting. The cradle
EXTRA LONG TEETH
Four extra long teeth allow the
RD320 to dig down to 32
Hydraulic Cylinder (Lift/Digging)
5” x 24”
ample hydraulic strength for
handling, and less chance of
Hydraulic Cylinder (Craddle Arms)
3” x 16”
digging.
the rock skidding or falling
out. They also provide a more
secure hold on the rock when
transporting it.
ROCK R
ENGINEERED TO PERFECTION.
Built in the Degelman tradition of quality rock removal equipment, the
RR1500 Rock Rake tackles a variety of jobs, including windrowing rocks
for subsequent picking, reclaiming gravel on secondary roads,
conditioning soil for the construction of golf courses, and leaving a
well-groomed final finish for optimum seeding.
“ Well-built products with pride and thought put into
them.” - Greg Sueen, Barrhead, AB
HYDRAULIC DRUM ANGLE
The hydraulic angle adjustment allows the
operator to hydraulically angle the entire
machine on the go. Drum Angle can be
adjusted from 10° to 30° to achieve the
optimum working angle to suit various
windrowing conditions.
HARD SURFACED
REVERSIBLE/REPLACEABLE TEETH
These hard surfaced teeth are manufactured
using a special grade of steel to avoid
breaking and bending. These teeth also
provide maximum wear as they can be rotated
to use both sides. When teeth do have to be
replaced, this can be done without
changing the entire drum.
FEATURES & SPECIFICATIONS
Model
ROCK RAKE - RR1500
Working Width
14’
Length
15’
Transport Width
Weight
3640 lbs.
Drum Angle
10º to 30º
H.P. Minimum
OPTIONAL
HYDRAULIC MOTOR
Drive
50 h.p.
Hydraulic motor or 540/1000 PTO
Main Frame
Tires
RR1500
RAKE
RECLAIM GRAVEL
For years rural municipalities have saved thousands
of dollars, reclaiming up to 75% of their lost gravel
with a Degelman Rock Rake. A simple sprocket
change in the transfer case will speed the
output drum to the optimum speed for
breaking lumps, pulling up and sifting
shoulder side gravel off of rural roads.
DRIVE TRAIN
The rock rake drive train is a
whole-drive system consisting of heavy
Hydraulic-drive rock rakes are the
choice for tasks demanding quick setup/
8’
6” x 6”
9.5L x 15 Hi-Way
Chain
Rock Flap
#100
Standard
disconnect and applications that require
Teeth (reversible/replaceable) Hard Surfaced
reversing the drum rotation. The heart of
Hydraulic Cylinder (Lifting)
3” x 8”
Hydraulic Cylinder (Angling)
3” x 8”
Parker’s TK-series powertrain, the torque
link, is an extra-heavy-duty part that includes
patented 60:40 spline geometry. Rugged
construction throughout allows the transmission
of over 23,000 lb-in of torque. The entire
EXTREME DUTY CHAIN OIL
BATH
Built for extreme duty, this easy to service
powertrain is continually washed in cool, high
chain housing unit provides a
flow fluid to assure long life. Roller vanes and
continuous oil bath
sealed commutator maintain high efficiency
for constant
and provide smooth low speed performance.
lubrication.
HYDRAULIC FOLDING SYSTEM
It also
incorporates our
The hydraulic folding system comes standard
improved chain
on every machine, and provides for an easy
tightening system
narrow transport width of eight feet and a
for quick and
working position of 14 feet.
simple adjustment.
duty drivelines, gear box, #100 roller chain,
FLOATING DRUM
and slip clutch. The entire rock rake is driven
The floating drum absorbs the shock of buried
either hydraulically or by 540/1000 PTO.
obstructions taking the stress off the machine.
LAND LEVEL
SUPERIOR CYLINDERS
WE MANUFACTURE OUR OWN
TWO MACHINES IN ONE.
We manufacture our own cylinders to
industrial-strength standards. This way we
Level and haul. Designed to be rugged, the Land Leveler LL3050 and the LL3650
take on the toughest obstacles and last for years. This simple yet rugged machine
offers the convenience of both leveling and hauling, and is available in ten and
12 foot widths. Best of all, it offers the same
strength as our proven bulldozer blades.
“ Nothing is as durable as a Degelman.”
- Partick Murray, Reserve, MT
Held
Greasable
Pins
know every one is done right and we can tailor
the cylinders to specific product requirements
for optimum performance.
Induction Hardened Shaft
(200-Hour Corrosion Resistant Chrome)
Wear Band
Rod Wiper
Wear Band
Five Part Seal
Ports Drilled & Tapped
DESIGNED FOR
LEVELING/HAULING
Whether you’re filling potholes, leveling for
irrigation, digging a dugout, building an
approach, landscaping, or hauling material,
this versatile machine can do the job.
DESIGNED TO LAST
Degelman Land Levelers are built with the
same strength and durability as their renowned
bulldozer blades, incorporating high-quality
cylinders and replaceable MaxTemp® cutting
edges.
DESIGNED FOR
PRECISION AND CONTROL
Available in 10 foot or 12 foot widths, with
a blade height of 34 inches, the LL3050 and
the LL3650 have a capacity of two and 2-1/2
cubic yards respectively. Lift hydraulics allow
the operator to adjust the cutting depth while
ELERS
the apron hydraulics control the amount of
material collected or deposited. The
wheels are independently adjustable
for more contour control.
FEATURES & SPECIFICATIONS
Model
LL3050
LL3650
Working Width
10’
12’
Capacity (cu. yds.)
2”
2-1/2”
2080 lbs.
2320 lbs.
Weight
Length
14’
Blade Height
34”
Cutting Depth
2”
Cutting Edge
H.P. Range
Hitch Tongue
Tires
5/8” x 6” (MaxTemp®)
70 to 200 h.p.
Adjustable
9.5L x 15
Hydraulic Cylinder (Lifting)
3-1/2” x 8”
Hydraulic Cylinder (Apron)
3” x 8”
LAND LEVELER (SCRAPER)
LL3650
SHU
GRAIN CA
SHUTTLEKART VERSATILITY.
DEGELMAN DURABILITY.
The Shuttlekart® delivers the kind of durability and versatility expected from all Degelman products.
Features such as variable level unloading and heavy-duty design provide flexibility and strength. An
easily accessible clean-out panel running the full length of the horizontal auger makes clean-out a snap.
A swing-up ladder, rear tow hooks, internal ladder and catwalk are all part of the Degelman trademark
for safety and convenience. The self-supporting box design, 5-1/2 inch diameter axles,
and electronic weigh scales available in the Shuttlekart® display the innovations for which
Degelman Industries is famous.
UNLOADING SWIVEL AUGER
Unloads directly into a bin auger or truck.
Large operating range from 15’-6” (highest) to
2’-6” (lowest) depending on spout usage.
AUGER UNLOADING SPOUTS
Flexible, detachable, more precise unloading.
HYDRAULIC FLOW CONTROL
This system allows the operator to regulate
grain flow without adjusting PTO speed.
SHUTTLEKART
CARTS
ADJUSTABLE CLEAN-OUT
PANEL
Easily adjustable panel runs the full length of
the drag auger making cleaning a snap.
UNIQUE WHEEL POSITIONING
FEATURES & SPECIFICATIONS
Wheel position results in a well balanced
Shuttlekart® Model
800 1150
machine, reducing stress on tractor drawbar.
Capacity (bushels-approximate)
800
1150
Overall Width
10’
12’
Height
11’-4”
11’-10”
Length
25’-11”
29’-11”
AUTOMATIC CHAIN OILERS
Automatically lubricates chains while the machine is in use.
Main Frame Tubing (4” x 10”) 1/4” W
3/8” W
ELECTRONIC WEIGH SCALES
Axles (adjustable - 800 only)
5-1/2”
Electronically monitor grain production
Tires (1150 - Diamond)
35.5L x 32 - 20 ply
Tires (800 - Diamond)
30.5L x 32 - 12 ply
while in the field.
4-1/2”
Tires (800 - Lug)
Drag Auger
Clean-out Dimensions
30.5L x 32 - 14 ply
12” Diameter
12’ (800)
Unloading Auger
Swivel Range (approx.)
15’ (1150)
16” Diameter
45º - 15’-6” to 2’-6”
PTO (20 & 21 Spline Shafts)
Hydraulic Cylinder (Auger Fold)
1000 RPM
3-1/2” x 16”
Hydraulic Cylinder (Auger Raise)
3” x 16”
Hydraulic Cylinder (Flow Control)
3” x 8”
B
BALE PROCESS
CUT YOUR WORK IN HALF.
The new Degelman bale processors are the most rugged and reliable processors available. They are designed for the
professional to process bales day in and day out. No matter how the bale is oriented in the chamber or the condition of the
bale, Degelman bale processors will process soft core, hard core, silage and squares under two minutes − no sweat.
Specifications
Unique Feature(s) & Bale Types
SC-Soft Core, HC-Hard Core,
S-Silage, 3x3 & 4x4-Square
Discharge Side
2881
Economical Model
SC
HC
S
2880-LH/2881-RH
3000/3100
Standard Model
SC
HC
S
3000-LH/3100-RH
3100 HD
Heavy Duty Frame
SC
HC
S
3000-LH/3100-RH
3110 TR (Total Ration) & 3120 TR
Grain Tank - 40 bu.
SC
HC
S
40Bu.
Right-Hand
Grain Tank -100 bu.
SC
HC
S
100 Bu.
Right-Hand
Number of flails
30 30
30
30
30
Flail size 3/4” x 1 1/2” x 8 5/8”
3/4” x 1 1/2” x 8 5/8”
3/4” x 1 1/2” x 8 5/8”
3/4” x 1 1/2” x 8 5/8”
3/4” x 1 1/2” x 8 5/8”
Standard
Standard
Standard
Standard
Standard
25”
27”
27”
27”
27”
6550 fpm (74.4 mph)
7000 fpm (79.5 mph)
7000 fpm (79.5 mph)
7000 fpm (79.5 mph)
7000 fpm (79.5 mph)
80º CV U-Joint 80º CV U-Joint
80º CV U-Joint
80º CV U-Joint
80º CV U-Joint
1 15/16”
1 15/16”
1 15/16”
1 15/16”
1 15/16”
Oil impregnated bushings in flails
X-Rotor diameter - extended tips
Flail tip speed @ 1000 rpm
PTO shaft
X-Rotor shaft - lock collar bearings
X-Rotor shaft - stub shaft
3”
3”
3”
3”
3”
Beaters - aggressive
2 - hyd. driven
2 - hyd. driven
2 - hyd. driven
2 - hyd. driven
2 - hyd. driven
Disc type twine guards
Standard
Standard
Standard
Standard
Standard
Large bale chamber
6’ Diameter
6’ 8” Diameter
6’ 8” Diameter
6’ 8” Diameter
6’ 8” Diameter
Discharge opening
6” x 72”
6 3/4”-11 3/4” x 80”
6 3/4”-11 3/4” x 80”
6 3/4”-11 3/4” x 80”
6 3/4”-11 3/4” x 80”
Lift cylinders
Dual 2 1/2” x 20”
Dual 2 1/2” x 20”
Dual 3” x 20”
Dual 3” x 20”
Dual 3” x 20”
Main frame
3” x 6”
4” x 6”
4” x 8”
4” x 8”
4” x 8”
Tires
9.5L x 15-8 ply
11L x 15-8 ply
Optional tires
-
31-13.5 x 15-8 ply
Paint - Ultra Durable Powder Coat
Dimensions WxHxL w/o tines
[------------ 16.5L x 16.1-6 ply - Turf and Field flotation tires ------------]
-
-
-
Standard
Standard
Standard
Standard
Standard
8’ 6” x 7’ 6” x 11’ 10”
9’ 6” x 8’ 10” x 13’ 4”
9’ 6” x 8’ 6” x 15’ 6”
9’ 6” x 9’ 2” x 15’ 10”
’ 6” x 9’ 2” x 15’ 10”
Weight
2700 lbs.
3900 lbs.
5000 lbs.
5250 lbs.
5500 lbs.
Horsepower required 50-70 hp
65-125 hp
80-125 hp
80-125 hp
80-125 hp
IMPORTANT STANDARD FEATURES
SAVE 20% WITH FINE CUT OPTION
New X-Rotor with heavy 3/4” x 1-1/2” flails,
A fine cut option can easily be installed to cut
two aggressive beaters that can handle feeding
material finer to make the hay even more palatable.
your bale even when improperly loaded,
hydraulic discharge shield that can be adjusted
“on the go”, and adjustable chop settings for
BALE KING
SSORS
more or less aggressive processing. A fine chop
option may also be purchased for an even finer
cut. Our patented right-hand discharge option
is simple, reliable and incorporates a custom
designed heavy-duty gearbox.
FEED COSTS - SAVE 30%
Windrow and bunk feeding is dramatically more
efficient than traditional methods.
BEDDING - SAVE 50%
Degelman processors are the tools of choice for
mucky, wet and cold conditions.
NEW X-ROTOR
The heart of the Degelman bale
processors is the new and exclusive
X-Rotor: This oversized rotor and
high tip speed processes silage or
frozen bales in any bale orientation.
4100 & 4120 TR (Total Ration)
Adjustable Bale Chamber Models (100 Bu. Grain Tank
on 4120 TR model)
SC
HC
S
2-3’x3’
4000-LH/4100-RH
100 Bu.
4120-RH
30
30
3/4” x 1 1/2” x 8 5/8”
3/4” x 1 1/2” x 8 5/8”
Standard
Standard
27”
27”
7000 fpm (79.5 mph)
7000 fpm (79.5 mph)
80º CV U-Joint
80º CV U-Joint
1 15/16”
1 15/16”
4’x4’
3”
3”
2 - hyd. driven
2 - hyd. driven
Standard
Standard
6’ 8” Diameter
6’ 8” Diameter
6 3/4”-11 3/4” x 80”
Dual 3” x 20”
4” x 8”
Even the best bales require supplemental feed
TWINE REMOVAL
DOESN’T GET ANY EASIER
value to meet cattle energy demands in cold
Typical bale processors have
weather. The 3110 TR, 3120 TR and 4120 TR
round drums and shafts that act
incorporate a stable and easy to fill rear mounted
as spools making twine removal
grain tank and six inch discharge auger to top-
difficult. Degelman’s X-Rotor
dress and supplement windrows in one pass.
bridges the twine making cutting
40 AND 100 BUSHEL GRAIN TANKS
and removal effortless. Special alignment of
the rotor is not required.
6 3/4”-11 3/4” x 80”
Dual 3” x 20”
4” x 8”
EXCLUSIVE GEARBOX DESIGN
[- 16.5L x 16.1-6 ply - Turf and Field flotation tires -]
The tractor PTO is reversed with a custom
-
-
designed 1:1 ratio heavy-duty gearbox for
Standard
Standard
9’ 6” x 9’ 2” x 15’ 10”
right-hand discharge. Right-hand discharge
8’1”-15’1” x 9’10” x 15’6”
aligned with right-hand tractor controls greatly
5250 lbs.
5500 lbs.
improves safety, visibility and operator comfort.
80-125 hp
80-125 hp
and ergonomics - an industry first.
BETTER FIELD INCORPORATION
Processed hay and straw breaks down easier in
the field and creates more of an even spread
pattern in combination with a manure spreader.
MORE GROUND. LESS TIME.
WHEEL RA
Today’s raking equipment must be aggressive enough to move large quantities of forage and be able to cover more ground in
less time. Degelman’s new VR Series Wheel Rakes combine high capacity raking with rugged long lasting construction. These high
end rakes are designed and built to handle large volumes of hay at fast speeds and to increase drying time and productivity.
VARIABLE WINDROW WIDTH ADJUSTMENT
The VMAX was created by Bridgeview Manufacturing to push the current “VR Series” design to offer variable
windrow width adjustment, on the fly, keeping rake width constant. The main advantage is that the operator
can adjust his raking windrow to light or heavy hay conditions when he sees fit, always putting together a
nice swath, always having the width to avoid misses.
OVERSIZED WHEELS-WIND
GUARD
When compared to the smaller 55 inch wheel
used in most hay rakes, the larger 62 inch
wheel on the VR series allows easier rolling and
better material flow in heavy or wet conditions.
Wind Guard, standard on all models of the
VR Series Wheel Rakes, is proven and effective
at increasing material flow during raking and
gives the VR series rake wheel more strength
FEATURES & SPECIFICATIONS
Model
and durability.
Raking Width (front/back)
Weight
8 Wheel
22’ / 4’-2”
2877 lb.
10 Wheel
26’ / 4’-2”
3301 lb.
12 Wheel
30’ / 4’-3”
3616 lb.
14 Wheel
34’ / 4’-3”
4052 lb.
16 Wheel
38’ / 4’-8”
6476 lb.
18 Wheel
42’ / 4’-8”
6900 lb.
20 Wheel
46’ / 4’-8”
7324 lb.
VR Series Rakes
8&10
PATENT PENDING TENSION SPRING
Transport Width
8’-6”
8’-6”
9’-6”
A low maintenance tension spring design gives
Transport Length
26’-10”
32’-8”
42’
the rake wheels longer service and provides easy
Wheel Diameter (40 - 7mm Easy Change teeth) 62” tension adjustment. The unique assembly helps
provide for desired tensioning of the wheels during
raking operations while also providing for the easy
shifting of the rake between raking and transport
positions.
12&14 16,18,20
Windrow Width Adjustment 18” (8-14) 32” (16-20) Boom (trussed on 16, 18, 20 wheel models)
5” x 5” Tubing
Optional Kicker Wheels (for 16, 18, 20 wheel models)
Standard Features: Windguards, Transport Lock,
Hitch Jack, Greasable Pins w/ Poly Bushings,
205-75R15 tires, Front wrap-around Castor
Wheels, Castor Wheel Brakes, Independent
VR SERIES
RAKES
Floating Reels, Reel hubs with tapered bearings,
Tension Reel Springs, Dual acting Reel lift cylinder,
Ultra durable powder coat paint.
•FAST TOOTH REPLACEMENT
NEW OPTIONAL KICKER WHEELS
Individually bolted / single tooth replacement.
New rear kicker wheels option on the 16,
•EASY WIDTH ADJUSTMENT
LOW MAINTENANCE
18 and 20 wheel rakes allows more efficient
Easy/fast turnbuckle style adjustment on
The rugged frame of the VR Series Wheel Rake
drying by turning over the center windrow when
VR810-VR1214 (Hydraulic-VR1620).
is made from heavy duty 5” x 5” structural
pulling together 3 swaths and moving center
tubing compared to the standard 4” x 4”
material into a more compact windrow.
•HYDRAULIC WHEEL HEIGHT
tubing. This makes the VR series a stronger and
more resilient wheel rake. The
standard heavy duty wrap
around castor wheels
provide the VR Series
Wheel Rake with
added stability to its
wings and provides
a greater amount of
maneuverability on tight
turns.
Hydraulic wheel height adjustment (double
acting) lifts wheels from raking to transport
TAPERED BEARINGS
The VR series wheel rakes are all constructed
using heavy duty tapered bearings. These
long lasting resilient bearings can handle
both radial and thrust loads and are
sealed within a dust cap to
prevent any foreign material
from entering.
position. The rake wheels are independently
mounted using the unique tension spring
design to follow the contours of the ground.
MANURE SPREA
WHAT MAKES THE WORLD’S BEST SPREADER?
How do you build the best manure spreader in
the world? Start with Degelman, renowned for
building legendary equipment for the past 50
years. The design is unmistakably Degelman.
After five years of design, development, and
intensive testing, Degelman introduces the
most rugged spreader available – the M28.
From the ground up, the M28 was designed
with rocks in mind, from its proprietary
retractable free-swing flails, super duty
gearbox, smooth sidewalls and heavy-duty
frame to its clean gate opening.
WORLD’S MOST RUGGED
GEARBOX
heat-treated spline shafts are massive. Oil
bathed heat-treated gear sets and roller
bearings are in some cases twice the size of
The gearboxes that support the beaters are
anything out there. These boxes are designed
the largest commercial boxes available. From
for years of maintenance free commercial
the inside out, these boxes
use. The input drivelines also include runaway
are overbuilt.
The nearly three-inch
M28/M34
EADER
diameter
WALKING BEAM SUSPENSION
From the ground up, the M28 was designed
The Degelman M28 Spreader incorporates
with superior components, easy access and
a straight forward and time tested walking
minimal maintenance: replaceable impeller
beam suspension system.
paddles, 4”x 12” HSST frame, super-duty
wheels cut uneven
gearboxes, oversized marine-grade chains,
terrain in half
¾” AR400 paddles, self lubricating bearings,
with a massive
large oversized idler door access, external
unrestricted range
idler/drive grease points, high tensile bushings,
of motion. All four
nylon sandwiched walking wheels and easy to
wheels are always in contact with the ground
replace 2” x 4” floor slats.
surface. Coupled with a wide stance, the
ease and control.
The best just got better.
world employ beaters made from
Hammerhead paddles, exclusive to
some variation of a helical or
HAMMERHEAD
TECHNOLOGY
M Series Degelman spreaders, will
always vulnerable to rock damage and high
again change your thinking of spread distance
maintenance costs.
and uniformity. Hammerhead paddles are
state-of-the-art especially for wet, sticky and
The Degelman ROCK BYPASS SYSTEM (RBS),
clay-mix manures. The hammerhead shape
the heart of the M28, is
covers the discharge opening equalizing the
short of revolutionary.
nothing
Five rows
of free-swing flails, not
load amongst the paddles and its weighted
corrugated
teeth shred and
distribute material
only collapse upon stone
impact, but will exceed
without a centre
expectations for
buildup. Spread
throw distance,
pattern is truly
durability and even
unrivalled.
Hammerhead
distribution pattern.
The M28 cuts and
tears material,
drops heavier
paddles still swing back
for severe obstructions with
the Rock Bypass System and Flat or
crumbled material
Hammerhead paddles can still be changed by
to the next lower set of
simply pulling a pin. “
paddles for final processing and discharges
material over 60 feet.
Tandem walking
M28 will ride over the roughest terrain with
Up until now, all spreaders in the
auger shape. This inherently rigid design is
further rock protection.
LOW MAINTENANCE
HAMMERHEAD PADDLE
TECHNOLOGY
ROCK BYPASS SYSTEM
clutches for
SUPERIOR DISTRIBUTION PATTERN
Distribution and throw distance is unrivalled with
the Degelman M28. Fine pulverized material
is spread over 60 feet with secondary field
passes normally not required. Hydraulic Push
Off systems, however, compress manure as it is
unloaded. This compression rate changes as less
material is available for offloading resulting in
inconsistent field distribution patterns.
DEGELM
TELEHANDL
The AgriTech PTO
and rear 3PT hitch
provide unprecedented
multifunctional
perfomance. Agricultural
applications become
limitless.
APOLLO
COMPACT
AGRI TECH
AGRI PLUS
HEAVY LIFT
PTO/3 POINT
AGRI PLUS
If you do not require PTO, but do need some
muscle for the farm the AGRI PLUS is your choice.
Standard features include:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
128 HP IVECO TA Engines
9,000 lb / 24’ Lift Capacities
Power Shift with 4 forward – 3 reverse gears
25 MPH Road Speed with
“Easy Ride” Boom Cushion
Fan Reverser with Fan in Rear for less blockage and easy clean-out
Hydraulic Quick-Tach
30 Gallon/Minute Hydraulics with
Continuous Flow
2-Wheel / 4-Wheel / Crab Steering
Winter Package and Full Lighting Package
ROPS/FOPS cabs with Air, Tilt and
Full Instrumentation
4 in 1 Joystick control
ATP (Anti-tipping protection)
1–2–5 Year Degelman Warranty Package
Full Assortment of Attachments
APOLLO
Made for general construction, landscaping, lumber yards, nurseries, industrial and agricultural
applications. This super compact machine has a panoramic view, excellent reach, tight turning radius
and can work in confined areas. The Apollo can attach to any skid steer attachment. Unlike typical skid
steers, the operator does not have to step over the top of the attachment. Standard features include:
•
•
•
•
•
•
•
•
•
GELMAN/DIECI
DLERS
ANTI TIPPING PROTECTION
AGRI TECH
New for 2011, the AGRI TECH is equipped
with mechanical PTO (540 & 1000 PTO).
ATP insures that operators cannot tip the machine
and loads are well within
the operational parameters
of the machine.
It is also available with 3 point hitch. This
•
128 HP IVECO TA Engine
HIGHLY MANEUVERABLE
•
540/1000 Mechanical PTO
•
3 Point Hitch (category II)
•
7700 lb 21’ Lift Capacity
•
VS Vario System Transmission
•
Quick-Tach
•
Fan Reverser
•
Comfort and Winter Package
•
“Easy Ride” Boom Cushion
•
1-2-5 Warranty
You can flip the micro lever to skate around
virtually any obstacle with three steering modes:
FRONT WHEEL
STEERING
ALL-WHEEL
STEERING
CRAB
STEERING
multi chore tractor is equipped with the
following features:
71 HP YANMAR Engine
5,500 lb 19’ Lift Capacity
Hydraulic Quick-Tach
16 MPH Road Speed
2-Wheel / 4-Wheel / Crab Steering
Winter Package and Full Lighting Package
Walk-in ROPS/FOPS Cab (optional A/C)
4 in 1 Joystick
ATP (Anti-tipping protection)
www.degelman.com
1-800-667-3545
www.youtube.com/degelmanind
Protected by US and
CDN patents. Degelman Industries Ltd. is
constantly striving to
improve its products and reserves the
right to change design, material and
specifications without notice.
Printed
in Canada