THE COMPLETE FLOORING GUIDE

Transcription

WOODPECKER
Woodpecker House, 29 Pant Glas Industrial
Estate, Bedwas, Caerphilly, CF83 8DR
t: 02920 888223 [email protected]
f: 02920 881694 www.woodpeckerflooring.co.uk
MAY 2015 ISSUE 10
Head Office
Terms & Conditions
In the unlikely event that goods are delivered wrong or damaged,
it is the responsibility of the customer to ensure sufficient time is
allowed for a replacement to be sent.
WELCOME
1. DEFINITIONS
In these terms and conditions, the following words shall have the
following meanings:
“Buyer” shall mean any person, firm or company, to whom the
Company supplies Goods or Services or with whom the
Company enters into negotiations for the supply of Goods or
Services.
“Company” shall mean Woodpecker Trading Company trading as
Kenton Floors.
“Goods” shall mean products, articles or things which are
supplied by or which are the subject of negotiations for supply by
the Company to the Buyer.
“Services” shall mean services are supplied by or which are the
subject of negotiations/or supply by the Company to the Buyer.
TO THE WORLD OF WOODPECKER
2. MAKING THE CONTRACT
Kenton Floors is a third generation family owned business who have been
involved in the timber industry for over a quarter of a century. Our motto
has always been:
‘THE BEST IS ONLY JUST GOOD ENOUGH’
At Kenton Floors ‘Affordable quality’ is no idle claim. Our traditional high
standards of selection and machining of every plank of flooring – instituted
in the original small factory where the first floors were made – are still
applied today now that our manufacturing facilities extend to thirteen
state of the art factories around the globe. Every board goes through a rigid
quality and grading process to ensure that the highest possible standards
are met to guarantee your perfect satisfaction.
‘TRADITIONAL HAND FINISHING TO ACHIEVE
A TIMELESS ELEGANCE’
The boards are then put through finishing processes such as lacquering,
oiling or antiquing – many of which are carried out by hand using centuries
old traditions – for that timeless elegance that only a natural wood floor
can bring to your home.
Finally it is stored in our extensive warehousing facility where we hold large
stocks ready for immediate dispatch to fulfil your requirements. All so that
you can enjoy the natural elegance of timeless tradition without delay once
you have made your selection.
We trust you will experience as much pleasure from your floor as we have
had in bringing it to you.
‘YOUR SATISFACTION GUARANTEED WITH
A 25 YEAR WARRANTY’
2.1 The Company’s salesmen are not authorised representatives
and are not authorised to accept confirm or vary any order nor to
make any representation or promise on the Company’s behalf
2.2 Any estimate/quotation which comprises an invitation to
treat is open for a period of 30 days only from the date thereof,
provided that the Company has not previously withdrawn it. Any
order issued by the Buyer is subject to acceptance by the
Company and a contract will only be formed when the Company
has accepted the Buyer’s offer to buy in writing. Any offer made
by the Buyer must be confirmed in writing by the Buyer.
2.3 All orders are placed under these terms and conditions alone.
2.4 These terms and conditions exclude any other terms and
conditions inconsistent therewith which a Buyer might seek to
impose even though such other terms and conditions may be
submitted in a later document and/or purport to exclude or
supersede any terms or conditions with them or may be
contained in any offer acceptance or counter-offer made by the
Buyer.
2.5 All floors supplied by the Company must be fitted in
accordance with BS8201 (1987).
2.6 No variation of these terms and conditions is permitted
unless expressly accepted by a Director of the firm in writing.
3. CANCELLATION
Each Woodpecker floor carries this outstanding reassurance of our
confidence that you will not find a better value product anywhere on the
market. Your satisfaction depends on our care and attention to detail,
such as the careful selection of the trees before they are felled and the
way in which the timber is sawn, stacked and dried.
In most cases the sawn timber is air dried for over twelve months prior
to a 2 stage kilning and dehumidification process to achieve maximum
stability. It is then carefully selected for grain pattern, colour variation
and knots, to provide the many varied appearances that are available
within the Woodpecker range. It is then machined using the latest
technologies – in many cases to engineering tolerances that up to a few
years ago would have been thought impossible – so we can bring virtual
perfection to your floor.
OUR COMMITMENT TO SUSTAINABILITY
We care about the environment and go to great lengths to bring to you
products that have been manufactured from materials harvested with
this in mind.
Stringent attention to all products right from the source to your door
gives you the assurance that with a Woodpecker floor you are not
impacting negatively on the environment.
The Woodpecker Team
3.1 No cancellation by the Buyer is permitted except where
expressly agreed by a Director of the Company in writing.
3.2 The Buyer will in the event of agreed cancellation by the
Buyer indemnify the Company fully against all expenses incurred
up to the time of such cancellation together with by way of
liquidated damages a sum of 33 1/3% of the contract price which
shall be paid by the Buyer to the Company forthwith,
4. PRICE
4.1 All prices quoted are those ruling at the date of dispatch or
supply.
4.2 Unless otherwise stated all prices quoted are net, exclusive of
VAT, and in the case of Goods ex works.
4.3 The Company reserves the right at any time prior to delivery
of the Goods or supply of Services to adjust the price to take
account of any increase in the cost of raw materials, labour or
services or any currency fluctuations affecting the cost of
imported materials or services.
5. TERMS OF PAYMENT
5.1 All sums become due and payable under these terms and
conditions not later than 20th of the month following date
of invoice.
5.2 Time for payment shall be of the essence.
5.3 The Company reserves the right to charge interest at 2.5 per
centum per month on all overdue accounts, such interest being
deemed to accrue on a day to day basis from the due date for
payment under clause 5.1.
5.4 If the Buyer (being a Company) has a petition for its
winding-up or passes a resolution for voluntary winding-up
otherwise than for the purpose of a bona fide amalgamation or
reconstruction or compounds with its creditors or has a receiver
appointed or all or any part of its assets or (being an individual)
becomes bankrupt or insolvent or enters into any arrangement
with its creditors or commits a material or serious breach of this
Agreement (and in the case of such a breach being remediable
fails to remedy it within 7 days of receiving notice to do so) he
will be deemed to have repudiated the Contract.
5.5 The Company reserves the right at any time at its discretion
to demand security for payment before continuing with or
delivering any Order, supplying any Goods or Services.
5.6 The Buyer accepts that in the event of non payment within
the payment period the Company will resort to legal action to
recover the debt in this instance a 20% surcharge will be added
to the outstanding amount to cover administration and agents
fees.
5.7 Where the Buyer is a company the directors agree to
guarantee payment personally, both jointly and severally, of any
outstanding amounts due in the event of their company being
unable to meet its financial commitments or becoming insolvent.
6. DELIVERY
PEFC Certified
This product is
from sustainably
managed forests and
controlled sources
PEFC/16-33-444
www.pefc.org
6.1 Delivery will be deemed to have been effected when the
Goods are ready for collection at the premises of the Company or
as the case may be the premises of the suppliers to the Company
in circumstances where the Goods are delivered direct from such
suppliers.
6.2 Time of delivery is not of the essence.
6.3 The Company shall not be liable for any loss whatsoever or
howsoever arising caused by its non-delivery or by the failure to
make Goods ready for collection on the due date.
All prices include VAT
6.4 The Company reserves the right to make delivery by
installments and to tender a separate invoice in respect of each
installment.
6.5 When delivery is to be by installments or the Company
exercises its right to deliver by installments under clause 6.4
hereof or if there be delay in the delivery of any one or more
installments for whatever reason this will not entitle the Buyer to
treat the contract as repudiated and/or to damages.
6.6 Deviations in quantity between the Goods delivered and
Goods ordered representing not more than 10 per cent by value
shall not give the Buyer any right to reject the Goods or to claim
damages and the Buyer shall be obliged to accept and pay at the
contract rate for the quantity of the Goods delivered.
7. SUPPLY OF SERVICES
7.1 Time for the supply of Services is not of the essence.
howsoever arising caused by its failure to supply Services or any
part thereof on the due date.
7.3 The Company reserves the right to supply Services by
installment.
7.4 When the supply of Services is to be by installments or the
firm exercises its right to supply Services by installments under
clause 7.3 hereof or if there be a delay in the supply of any one or
more installments of Services for whatever reason this will not
entitle the Buyer to treat the contract as repudiated or to
damages.
7.5 Deviation in the quantity between Services supplied and the
Services ordered representing not more than 10 per cent by value
shall not give the Buyer any right to reject the Services or to claim
contract rate for the quantity of the Services supplied.
8. RISK AND THE PASSING OF PROPERTY IN GOODS
8.1 Risk in the Goods shall pass to the Buyer when the Goods are
delivered.
8.2 Notwithstanding risk in the Goods passing in accordance
with clause 8.1 hereof title in the Goods shall not pass to the
Buyer until whichever shall be the first to occur of the following:8.2.1 payment being received by the Company for the Goods and
Services and no other amounts then being outstanding from the
Buyer to the Company in respect of other Goods or Services
supplied by the Company
8.2.2 the Buyer selling the Goods in accordance with the
provisions of these terms and conditions in which case title to the
Goods shall be deemed to have passed to the Buyer immediately
prior to delivery of the Goods to the Buyer’s customers; and
8.2.3 the Company waiving its rights under this clause 8.2 in
respect of specified Goods or Services whereupon title to the said
Goods shall forthwith vest in the Buyer.
8.3 The Buyer is licensed by the Company to use or to agree to
sell the Goods delivered to the Buyer subject to the express
condition that the entire proceeds of any sale are held in trust for
the Company and are not mixed with other moneys or paid into
an overdrawn bank account and shall at all times be identifiable
as the Company’s moneys.
8.4 Until title to the Goods passes:
8.4.1 The Buyer will hold the Goods as fiduciary agent and bailee
for the Company;
8.4.2 the Goods shall, subject to clause 8.3, be kept separate and
distinct from all other property of the Buyer and of third parties
and in good and substantial repair and condition and be stored in
such a way as to be clearly identifiable as belonging to the
Company;
8.4.3 the Company may at any time revoke the power of sale and
use contained in clause 8.3 by notice to the Buyer if the Buyer is
in default beyond the 20th of the month following invoice in the
payment of any sum whatsoever due to the Company (whether
in respect of the Goods or any other Goods or Services supplied
at any time by it to the Buyer) or if the Company has bona fide
doubts as to the solvency of the Buyer;
8.4.4 The Buyer’s power of sale and use contained in clause 8.3
shall automatically cease if the Buyer has a petition presented for
its winding-up or passes a resolution for voluntary winding-up
appointed of all or any part of its assets or becomes bankrupts or
insolvent or enters into any arrangements with creditors or takes
or suffers any similar action in consequence of debts or carries
out or undergoes any analogues act or proceeding under foreign
law;
8.4.5 upon determination of the Buyer’s power of sale and use
pursuant to clause 8.4.3 or clause 8.4.4. the Buyer shall place any
of the Goods in its possession or under its control and unsold at
the disposal of the Company and the Company shall be entitled
to enter upon any premises of the Buyer for the purpose of
removing such Goods.
8.5 The Company shall at any time be entitled to appropriate any
payments made by the Buyer in respect of any Goods or Services
in settlement of such invoices or accounts in respect of such
Goods or Services as the Company may in its absolute discretion
think fit notwithstanding any purported appropriation to the
contrary by the Buyer.
9. LIEN AND STOPPAGE
9.1 Until such time as the title in the Goods has passed to the
Buyer the Company has the right to withhold delivery if the Buyer
(being a Company) has a petition presented for its winding-up or
passes a resolution for voluntary winding-up otherwise than for
the purpose of a bona fide amalgamation or reconstruction or
compounds with its creditors or has a receiver appointed of all or
any part of its assets or (being an individual) becomes bankrupt
or insolvent or enters into any arrangements with creditors or
takes or suffers any similar action in consequence of debts or
carries out or undergoes any analogous act or proceedings under
foreign law.
9.2 When the title in the Goods has passed to the Buyer and the
time for payment has fallen due but payment has not been made
or if the Buyer (being a Company) has a petition presented for its
otherwise than for the purposes of a bona fide amalgamation or
appointed of all or any part of its assets or (being an individual)
becomes bankrupt or insolvent or enters into any arrangements
with creditors or takes or suffers any similar action in
consequence of debts or carries out or undergoes any analogous
act or proceedings under foreign law the Company has
9.2.1 a lien on the Goods so long as the Company is in possession
of them
9.2.2 a right of stoppage in transit
9.2.3 a right of resale
9.3 For the avoidance of doubt it is hereby declared that nothing
in this clause shall affect the rights given to the Company by
ss.38-48 of the Sale of Goods Act 1979.
10. INSPECTION/SHORTAGES
10.1 The Buyer is under a duty to inspect the Goods forthwith on
delivery and satisfy himself as to the due performance of Services
forthwith after supply.
10.2 The Company shall be under no liability for any defects or
shortages that would be apparent on careful inspection if the
terms of this clause are not complied with, and, in any event will
be under no liability if a written complaint is not delivered to the
Company within 7 days of delivery or supply detailing the alleged
detect or shortage.
10.3 In all cases where defects or shortages in respect of Goods
are complained of the Company shall be under no liability in
respect thereof unless an opportunity to inspect the Goods is
given to the Company before any use is made thereof or any
alteration or modification is made thereto by the Buyer.
10.4 Subject to clauses 10.2 and 10.3 the Company shall make
good any defect or shortage in the Goods and where appropriate
replace any Goods damaged in transit as soon as it is reasonably
able to do so, but otherwise shall be under no liability whatsoever
or howsoever arising from such defect, shortage or damage.
10.5 Subject to clause 10.4 the Company shall remedy any defect
in the supply of Services as soon as it is reasonably able to do so
but otherwise shall be under no liability whatsoever or howsoever
arising from such defect
11. WARRANTY
11.1 The Buyer shall satisfy himself of the suitability of the Goods
or Services for any particular use or purpose and shall be totally
responsible
11.2 If the Goods are in such a state or the Services so defectively
supplied as would but for this condition entitle the Buyer to
repudiate the contract and/or claim damages from the Company
the Company reserves the right to repair or replace the Good or
perform the Service (or relevant part thereof) again.
12. LIABILITY
12.1 Introduction
12.1.1 Nothing in clause 12 shall be deemed to exclude or restrict
the Company’s liability for death or personal injury resulting from
negligence.
12.1.2 Each of the sub-clauses in clause 12 is to be treated as
separate and independent
12.1.3 The Company is willing to undertake liability additional to
that provided by this clause in exchange for a higher price
12.2 Exclusion
12.2.1 Clause 12.2 only covers defects caused by faulty design,
manufacture, materials or workmanship. It does not cover
defects caused by abnormal use, misuse or neglect.
12.2.2 The Company agrees that if any defect covered by clause
12.2 is discovered during the warranty period commencing with
the date of delivery or supply, the Company will remedy any
defect at its own expense or, in the case of Goods if it chooses to
do so, replace them.
12.2.3 The Buyer cannot claim the benefit of this clause unless
- he informs the Company of the relevant defect in writing within
7 working days of discovering it.
12.2.3a The company will not accept any liability for defects in
goods once they have been fitted. It is the buyers responsibility to
check the goods prior to installation.
12.2.4 The risk of accidental loss whilst the Goods are being
returned will be borne by the Buyer
12.2.5 In consideration for receiving the benefit of this clause, the
Buyer agrees that, apart from those terms set out in clause 10
and 11, all other terms, whether conditions, warranties or
innominate terms, express or implied, statutory or otherwise, are
excluded from the contract between the Company and the Buyer
to the extent permitted by law (except where the Buyer deals as
consumer within section 12 of the Unfair Contract Terms Act
1977 when the terms implied by sections 13, 14 and 15 of the Sale
of Goods Act 1979 shall be implied into the contract).
12.3 Exclusion of Consequential Loss.
The Company shall not be liable for any consequential or indirect
loss suffered by the Buyer whether this loss arises from breach of
a duty in contract or tort or in any other way (including loss
arising from the Company’s negligence).
Non-exhaustive illustrations of consequential or indirect loss
would be
– loss of profits
-loss of contracts
-damage to property of the Buyer or anyone else, and
-personal injury to the Buyer or anyone else (except so far as
such injury is attributable to the Company’s negligence)
12.4 Limitation
The Company’s total liability for any one claim or for the total of
all claims arising from any one act or default of the Company
(whether arising from the Company’s negligence or otherwise)
shall not exceed £1000 Or the contract price whichever is the
greater.
13. FORCE MAJEURE
13.1 The Company shall not be liable for any failure to deliver the
Goods or perform the Services arising from circumstances
outside the Company’s control.
13.2 Non-exhaustive illustrations of such circumstances would be
act of God, war, riot, explosion, abnormal weather conditions, fire,
flood, strikes, lockouts, Government action or regulations (UK or
otherwise), delay by suppliers, accidents and shortage of
materials, labour or manufacturing facilities.
13.3 Should the Company be prevented from delivering the
Goods or performing the Services in the above circumstances, it
shall give the Buyer written notice of this fact as soon as
reasonably practicable after discovering it.
13.4 If the circumstances preventing delivery of the Goods or
performing the Services are still continuing three months after
the Buyer receives the Company’s notice, then either party may
give written notice to the other cancelling the contract.
13.5 If the contract is cancelled in this way, the Company will
refund any payment which the Buyer has already made on
account of the price (subject to deduction of any amount the
Company is entitled to claim from the Buyer) but the Company
will not be liable to compensate the Buyer for any further loss or
damage caused by the failure to deliver the Goods or perform the
Services.
14. SALES PROMOTION DOCUMENTATION
Whilst the Company takes every precaution in the preparation of
its catalogue, technical circulars, price lists and its other literature,
these documents are for the Buyer’s general guidance only and
the particulars contained therein shall not constitute
representations by the Company and the Company shall not be
bound thereby.
15. NOTICES
Any notice to be given hereunder shall be in writing and shall be
deemed to have been duly given if sent or delivered to the party
concerned at its address specified overleaf or such other address
as that party may from time to time notify in writing and shall be
deemed to have been served, if sent by post, 48 hours after
posting.
16. CANCELLATION
The Company is prepared to accept the cancellation of a contract
provided that it is in writing and is received by the Company:
(a) in the case of special orders before the manufacture of the
goods has commenced:
(b) in the case of goods ordered from stock before the goods
have been despatched.
(c) but subject to liability for any losses incurred by the Company
in disposing of the goods.
17. MATCHING
For technical reasons it is not always possible to obtain an exact
colour match between different production batches which have
the same colour description. The Company therefore
recommends that all products should be of the same batch. The
Company will be under no liability whatsoever in respect of any
mismatching of tiles and sheet with the same colour description
where the tiles and sheet are of different batches.
18. ADVICE AND WARNINGS
(a) Without prejudice to any of the Company’s rights under these
terms or common law or statute the Company shall not be liable
for any loss or damage suffered by the Buyer or any third party as
a result of failure to follow any of the Company’s
recommendations with regard to the goods.
19. STILETTO HEELS
Where Stiletto heeled shoes are in use, floors are liable to suffer
damage from intense point loading pressure. We therefore
cannot be held responsible for any loss in appearance where such
heels are in use.
20. SUITABILITY OF GOODS
If requested in writing to do so, we will use our utmost
endeavours to give sound and honest advice as to the suitability
of goods sold by us for a particular use or purpose, but we do not
represent or warrant (and nobody has authority to represent or
warrant) the fitness of any goods for any particular purpose or
use, whether such use or purpose is known to us or not or any
advice requested regarding installation.
21. ASSIGNMENT
The Buyer shall not assign or purport to assign or transfer the
contract or the benefits thereof to any other person without prior
written consent of the other.
22. PROPER LAW AND JURISDICTION
The Contract shall be governed by and construed in accordance
with English law and all disputes arising in connection with the
contract shall be submitted to the jurisdiction of the English
Courts.
23. HEADINGS
The headings of these conditions are for convenience only and
shall have no effect on the interpretation thereof.
Revision Date: May 2015
Kenton Floors, Caerphilly CF83 8DR
Tel: 02920 888223
Kenton Floors reserves the right to update and amend these
terms and conditions without notice.
TERMS & CONDITIONS
169
HOW TO CHOOSE
INDEX
SOLID WOOD
2
GOODRICH
79
GRADE & HARDNESS
3
WINDSOR
87
SURFACE FINISH
4
CHEPSTOW
97
ACCESSORIES
6
BAMBOO
114
INSTALLATION GUIDELINES
8
WARWICK
115
PREPARATION GUIDELINES
8
STYLE
119
124
10
LAMINATE
FLOATING
12
OLSEN
125
SECRET NAILING
14
PROFILES
152
THE TRICKY BITS
16
SOLID WOOD PROFILES
153
UNDERFLOOR HEATING
18
PROFILO PROFILES
154
FLOOR CARE
20
CONTOUR PROFILES
156
ROUTINE MAINTENANCE
20
CONTOUR & METAL PROFILES
158
LONG-TERM MAINTENANCE
22
BAMBOO PROFILES
159
SOLID WOOD
24
LAMINATE PROFILES
160
YORK
25
ACCESSORIES
161
FLINK
33
UNDERLAY & BARRIERS
162
REAL WOOD ENGINEERED
40
ADHESIVE & SEALANTS
164
41
FLOOR CARE
166
HARLECH
53
PACK CALCULATOR
168
BERKELEY
67
TERMS & CONDITIONS
169
RAGLAN
DISCLAIMER
PRICE DISCLAIMER
Although every care has been taken in the reproduction of this catalogue,
each product has its own individual character. Variations will inevitably occur
in the colour and structure and the physical limitations of the printing process
mean that we cannot guarantee your floor will look identical to the illustration.
Prices can be changed without notice and should be checked prior to orders
being placed. No responsibility or liability is accepted by Kenton Floors for any
loss arising from such a change.
Kenton Floors reserves the right to change dimensions and grading specification
without notice. Customers should confirm that the floor of their choice is still
available with the specification shown.
E&OE
LAMINATE
SPECIFICATION DISCLAIMER
BAMBOO
STICKING DOWN
ENGINEERED WOOD
HOW TO CHOOSE THE RIGHT FLOOR
While every effort is made to ensure that accurate pricing and descriptions
are given, we reserve the right to decline orders if they are based on inaccurate
information in this publication.
© Copyright 2015. No part of this catalogue may be copied or reproduced in
any way, without the express written permission of Kenton Floors. Nor may this
catalogue be used to sell or promote any products other than Woodpecker®.
1
RRP_15_Intro_section.indd 1
30/04/2015 12:37
HOW TO CHOOSE
TYPE
CHOOSE THE RIGHT FLOOR
SOLID WOOD
ENGINEERED
The traditional and timeless appeal of a solid wood floor will enhance
the appearance of any interior and endure for generations. Each board is
precision machined from a single piece of timber and typically finished
with a robust tongue and groove joint on all sides.
Each board is constructed from multiple layers of wood pressed together.
The top solid wood layer is available in a wide variety of species, finishes and
thicknesses to accommodate all tastes and requirements. It is supported by
a central core and backing board to give the floor increased stability.
BAMBOO
LAMINATE
While technically a variety of grass, the characteristics of a bamboo floor are
comparable to that of a hardwood floor. Bamboo is 100% sustainable with
a life cycle of around 5 years. Available in two styles; traditional and strandwoven, with the latter being twice as durable as the traditional method.
Laminate simulates the appearance of a real wood floor without some
of the practical drawbacks. Its colour and characteristics are determined
by a decorative foil that is coated with a transparent melamine layer for
durability. The core is made of High Density Fibreboard (HDF) for optimum
strength and backed with a stabilizing cellulose paper.
2
HOW TO CHOOSE
30/04/2015 12:37
HOW TO CHOOSE
GRADE
CHOOSE THE RIGHT GRADE
SELECT
RUSTIC
EXTRA RUSTIC
This grade offers a natural look with limited knots.
Considerable grain and colour variation provide a
characterful look. Up to 10% sapwood is permitted
in some species but only small knots allowed.
A rustic grade allows for considerable grain and
colour variation. Up to 10% sapwood, large knots*
(some filled), dark streaks and filled cracks are all
acceptable.
Very little is graded out in this category. Large
knots*, splits, cracks and any amount of sapwood
are all to be expected when choosing this
distinctive design.
* Knots are divided into 2 main categories. A dead knot occurs when the
core has been removed or has fallen out. It is subsequently filled. A live
knot still has the core and generally does not contain filler. This grade
includes both categories. When knots are filled it is not always possible
to closely match the colour of the wood. If large knots with filler are not
wanted it is the responsibility of the customer to inform the installer to
cut these out at the time of installation.
HARDNESS
CHOOSE THE RIGHT HARDNESS
SOFTER
HARDER
BAMBOO (STRAND WOVEN)
JATOBA
MERBAU
CANADIAN MAPLE
IROKO
BEECH
OAK
CHERRY
BAMBOO (ENGINEERED)
ASH
WALNUT
PINE
HOW TO CHOOSE
3
30/04/2015 12:37
HOW TO CHOOSE
FINISHING
CHOOSE THE RIGHT SURFACE FINISH
UV OIL / UV HARDWAX OIL
UV LACQUERED
An oiled finish penetrates the surface of the wood to bring out the natural
beauty of the grain. Each board receives 5–7 coats of oil and is UV cured at every
stage of the process. Choosing this finish allows for isolated areas of damage,
such as scratches, to be easily re-touched without the need for major work.
A lacquered floor is typically smooth to touch and more glossy in
appearance. Each board receives 5–7 coats of lacquer and is UV cured at
every level of the process. The finished result is a hardwearing and durable
surface that can be easily maintained.
UV MATT LACQUERED
UNFINISHED
The dull satin sheen of the matt lacquered finish has been designed to
replicate the appearance of an oiled floor, without the same periodic
maintenance requirements. Instead its smooth hard surface enjoys the
same upkeep as a lacquered floor.
An unfinished floor has no surface finish which allows you to create
a truly bespoke result in terms of both colour and durability. All products
are supplied with pre-filled knots and the boards are pre-sanded for
your convenience.
BRUSHED
SAWN
The top of the board is lightly brushed to remove the softer surface fibres
and expose the wood grain. The result is a subtly textured finish that
delicately highlights the natural grain structure within the timber adding
definition to each plank.
Keeping you right in touch with nature, the kerf of the saw marks are proudly
exposed on each board producing that delightfully rustic feel that conjures
up the inspiring smell of fresh sawdust and the pleasure of witnessing
freshly sawn timber.
4
HOW TO CHOOSE
30/04/2015 12:37
HOW TO CHOOSE
HANDSCRAPED
AGED & DISTRESSED
Full of rustic charm, this distinctive finish is characterised by the unique textures
that result from the hand scraping process. Each plank is painstakingly scraped
by hand prior to finishing which creates an aged look. The irregular ridges and
grooves add depth and warmth yet remain smooth to the touch.
Each plank is hand distressed to produce a textured surface reminiscent
of a naturally aged, rustic floor. The boards are then subjected to a series
of caustic processes, such as smoking, before the application of oil, filler and
stains to enrich their timeworn appeal.
BEVELLED EDGE
SQUARE EDGE
A bevelled edge adds definition to each plank creating a rustic feel that’s
more traditional in design. The chamfered edges will vary in size between
our different flooring collections, with anything from a discreet micro-bevel
right up to a deep v-groove.
The edges of each plank meet squarely when joined together, creating a
smooth and seamless transition between the boards. This results in a clean
and consistent overall finish that lends itself well to contemporary and
formal interiors.
HOW TO CHOOSE
5
30/04/2015 12:37
HOW TO CHOOSE
ACCESSORIES
SELECT THE RIGHT TOOLS
No castle is complete without a moat, drawbridge and gate; likewise, no
floor is complete without supporting accessories. Customers often lose
valuable time and inconvenience by neglecting these items when placing
their initial order. At Woodpecker we steer you through the entire process.
At the back of this catalogue you will find a detailed guide to a full range of
over 1000 supporting products and accessories. Whether you’re interested in
subfloor preparation or floor finishes, adhesives and underlays or complementing
trims, we provide everything you need to complete the job.
SUBFLOOR PREPARATION
Comprehensive subfloor preparation is, quite literally, the foundation of any
floor installation. Woodpecker’s custom-manufactured products can help
you overcome many of the obstacles faced when fitting a floor and ensuring
its longevity.
• 11P Surface Primer will seal any dusty or porous substrates to improve
adhesion before applying Level-X™ or the MS Parquet Adhesive.
• The WP60 Liquid Damp-proof Membrane seals residual moisture below
the surface of the screed which in turn allows you to stick down your floor.
UNDERLAYS & BARRIERS
Our leading underlay brands have continuously impressed our customers
and are widely regarded as an industry standard. Manufactured from the
finest raw materials, they ensure that the very best support is provided for
Woodpecker floors. Each covering is tailored to distinct installation variables
including: underfloor heating, damp sub-floors, irregular surfaces, soundsensitive installations and budgetary limitations.
• Floormate™, Aquastop™, XL underlay and our range of damp proof
membranes work to prevent water vapour from corrupting the floor planks
• Level-X™ is our intelligent fibre-reinforced self-levelling compound
designed to smooth surface irregularities ahead of installation.
ADHESIVES
All our adhesives are made to Woodpecker custom specifications and combine
effortlessly with all our tongue and groove flooring ranges.
• Acoustamat™ reliably dampens noise pollution as part of a liquid batten
installation
Woodpecker MS Parquet and WP50 Sausage Adhesive are specifically
designed to be solvent free and remain fully flexible post-curing. This innovative
characteristic allows the flooring to expand and contract between seasons
without separating it from the subfloor.
• Undermate™ allows the maximum transference of heat from underfloor
heating
The flooring grade PVA is of a much higher concentration than normally
available. This formula of adhesive is a field-proven customer favourite.
• For everyday value there is Basic20.
For more information please refer to page 164.
High performance specifications mean that these underlays meet and
exceed stringent industry standards. After three generations as a flooring
manufacturer we know the support a beautiful floor needs and accordingly
these underlays have been designed to meet our high standards. You can
find them on page 162.
6
HOW TO CHOOSE
30/04/2015 12:37
HOW TO CHOOSE
TRIMS
PROFILO™ PROFILES
Flooring profiles can be a confusing minefield of complicated
specifications. Factoring in size, colour and installation takes time and
can hinder purchasing decisions. It’s our aim to alleviate some of these
uncertainties to make finding the perfect trim as easy as possible.
Made from solid oak and pre-finished with several coats of tough lacquer,
these traditional profiles create a neat and durable transition or edge to
the floor. They are easy to install and available to complement every floor
in our catalogue. See the range on pages 154-155.
We offer a comprehensive range of floor finishing solutions to
complement every floor in our catalogue including our wood, bamboo
and laminate ranges. To remove any confusion, each floor has a trim code
listed within its specification that offers the most appropriate height and
colour for your floor choice. This allows you to find exactly what you need
in a few simple steps. See pages 152-153 for your guide to selecting a
profile.
CONTOUR™ PROFILES
The secret to a successful floor lies in these finishing touches! Flooring
profiles will conceal the unsightly edges of stairs, bridge expansion gaps
in doorways and provide a smooth transition between different floor
coverings. We also provide skirting and pipe covers for convenience.
All of our wood trims undergo a stringent colour-matching process
to ensure they make the best possible complement for our floors and
provide a smart finish to your installation.
These premium solid wood trims sit neatly in a black channel which can
be glued or screwed down. Coded to make the perfect fit for our wood
floors, they allow you to find the most appropriate height and colour trim
for your floor choice. See the range on pages 156-158.
COLOUR MATCHING
HOW TO CHOOSE
7
30/04/2015 12:37
HOW TO CHOOSE
INSTALLATION
PREPARATION GUIDELINES
PRE-DELIVERY CONDITIONS
INSPECTION
Before any flooring is delivered to site, all wet trades such as concreting,
plastering and decorating should be complete and the building must be
thoroughly dried out. Windows and doors must be fitted and watertight.
Woodpecker flooring is subject to strict quality control procedures,
however, our products are manufactured from natural materials so it
is essential that you check every plank carefully before installation.
We cannot consider any claims regarding product defects after installation.
N.B: As a rough guide, the drying time for a sand and cement
based screed is 1 day per mm for the first 50mm and 2.5 days per
mm thereafter. Therefore, a 50mm screed will take approximately
2 months to dry out while a 100mm screed could take about
6 months. Plaster may take 6 weeks or more to dry completely.
SUBFLOOR PREPARATION
Ideally the subfloor should be prepared for installation in accordance
with the industry standards outlined in BS-8201-2011. It must be in good
structural condition and free from damp rot, fungal or insect infestation
and contaminating residues. Surface irregularities should not exceed
3mm over a 2m area and the floor must be in a clean and vacuumed
condition. Hot pipes should be well insulated to prevent localised hot
spots under the floor that could lead to excessive shrinkage.
HEATING SYSTEMS
Before any flooring arrives on site, the room temperature and atmospheric
Relative Humidity (RH) must be stable. All heating and air conditioning
systems must be commissioned and operating for a minimum of 2 weeks
before fitting can commence.
Where underfloor heating is being used, we would always recommend
that a real wood engineered floor is installed in preference to a solid
wood floor due to the increased stability that a multi-layered construction
provides. Contractors that install solid wood flooring over underfloor
heating, do so at their own risk!
8
FITTING
ACCLIMATISATION
Before installation, it is imperative that all flooring is acclimatised in the
room it is to be fitted. The sealed unopened boxes should be laid flat, ideally
in the centre of the room, or with at least 50cm distance from the walls.
Flooring must not be stored outdoors, in an outbuilding or a room displaying
ventilation, damp or condensation problems. The site conditions need to
match those which will prevail when the floor is in use.
– Solid wood flooring requires 5–7 days acclimatisation
– Engineered and bamboo flooring require 3–4 days
– Laminate requires 24 hours
LAYING DIRECTION
Wood flooring looks its best when the planks are installed in the same
direction as the light and down the length of the room. However, if your new
floor is to be laid upon existing parquet, the boards should be arranged at
right-angles to the existing floor.
Disclaimer: Installation guidance is advisory and based on established good practice and
BS-8201-2011. It is the responsibility of the installer to ensure that correct procedures are
followed before, during and after installation. Kenton Floors do not accept any responsibility
for any issues relating to installation.
30/04/2015 12:37
HOW TO CHOOSE
MOISTURE TESTING
ATMOSPHERIC CONDITIONS
While the surface of the subfloor may appear dry, it is possible
that excess moisture may still be present within the substrate.
As wood and moisture are natural enemies, it is imperative to test
the subfloor moisture content before fitting. Using a professional
moisture meter such as the Protimeter MMS, the readings must
not exceed the following:
It is important that the following conditions are fulfilled before,
during and after the installation:
– 70% Relative Humidity (RH) for cement based concrete
N.B: Wood flooring is not suitable for installation in wet rooms
or areas where there is a regular flow of water.
– 11% Wood Moisture Equivalent (WME) for wooden subfloors
or joists.
– Room temperature of at least 18°C (64°F)
– Floor surface temp. of at least 15°C (59°F)
– Atmospheric RH of between 40% and 60%
FITTING
9
30/04/2015 12:37
HOW TO CHOOSE
INSTALLATION
STICKING DOWN YOUR FLOOR
Preparation Checklist
Are all wet trades complete and thoroughly
dried out?
As a rough guide, the drying time for a sand
and cement based screed is 1 day per mm
for the first 50mm and 2.5 days per mm
thereafter.
A traditional tongue and groove wooden floor can be fixed
directly to a concrete subfloor using the Woodpecker MS
Parquet Adhesive. This purpose-made adhesive will hold
the timber after a short open time but remains permanently
flexible to allow for the expansion and contraction of the
timber between seasons.
The adhesive should be applied using a 3–4.8mm notched trowel
(depending on the condition of the subfloor) and spread evenly onto the
subfloor. It is essential that there is a full bond and that each board is fully
adhered to ensure maximum stability.
We always recommend that solid wood flooring is installed by an
experienced floor fitter. Wood is a natural product and susceptible to
dimensional changes – each situation needs to be professionally assessed
before installation commences.
N.B: Never glue the joints when fully sticking your floor down. It places too
much pressure on the boards and could lead to cracking.
Is the subfloor clean, dry and free from any
contaminating residues?
If it is necessary to level the subfloor before
fitting, apply Level-X Primer followed by
Woodpecker Level-X (Fibre Reinforced)
Self-Levelling Compound. NEVER use latex
self-levelling compounds. They do not have
the tensile strength to resist the movement
of the timber.
Are the subfloor moisture readings
within tolerance?
A cement based screed must have an RH
(Relative Humidity) reading of 70% or less.
If there is any doubt as to the moisture levels
in the subfloor always apply the Woodpecker
WP60 Liquid Damp Proof Membrane which
will seal the moisture below the surface
of the floor and prevent the floor from
expanding and distorting. The subfloor must
be free of dust and any contamination before
application. Wooden subfloors must have
moisture readings of between 7% and 11%
WME (Wood Moisture Equivalent) and the
new flooring should be left to acclimatise
until it has reached a similar reading so as
to prevent undue expansion or contraction.
If the initial moisture readings are not within
tolerance then an alternative method for
fitting should be used.
Is the atmospheric RH reading between
40% and 60%?
If underfloor heating is present, has it been
properly tested and turned off 48 hours
before fitting?
Has the flooring been acclimatised for the
correct period of time?
Level-X™ Primer ..................................................P.164
Level-X™ Compound ..........................................P.164
WP60 Liquid DPM .............................................P.164
MS Parquet Adhesive .........................................P.164
10
FITTING
30/04/2015 12:37
HOW TO CHOOSE
FITTING
11
30/04/2015 12:37
HOW TO CHOOSE
INSTALLATION
FLOATING YOUR FLOOR
dried out?
As a rough guide, the drying time for a sand
and cement based screed is 1 day per mm
for the first 50mm and 2.5 days per mm
thereafter.
Floating a floor essentially means that the new boards are
loose laid over a suitable underlay instead of being screwed,
nailed or stuck to the subfloor.
A floating floor can be installed over various subfloors including concrete,
anhydrite, existing wood floor, chipboard, ceramic tiles, PVC and linoleum,
providing they meet the preparatory guidelines. Soft subfloor coverings such
as carpet must be removed.
Underlay should be laid edge-to-edge in the opposite direction to that
of the flooring and linked using an adhesive tape. If your underlay is dualpurpose and also provides a Damp Proof Membrane (DPM), always use
the Woodpecker Vapour Tape to prevent moisture rising between the
seams. Do not overlap the underlay unless it has been specifically
designed to do so.
Starting in a corner of the room lay the first row of flooring with the tongue
(T&G) or top lip (Loc/Clic) of the board facing the wall. Don’t forget the
necessary expansion gaps! Ensure that all boards are tightly joined or glued
together, using a tapping block or pulling iron with care if necessary. The
off-cut from the final board in each row can be used to begin the next row,
providing it measures 200mm or more. To maximise the appearance of your
floor it is important to stagger the ends of the boards (header joints) by at
least 300mm.
Is the subfloor level to within 3mm over
a 2m radius?
Minor undulations can be disguised using
the Woodpecker XL Underlay which will
help to absorb slight irregularities. However,
if it is necessary to level the subfloor before
fitting, apply Level-X Primer followed
by Woodpecker Level-X Self-Levelling
Compound.
Are the subfloor moisture readings
within tolerance?
A cement based screed must have an
RH (Relative Humidity) reading of 70%
or less while wooden subfloors must read
between 7% and 11% WME (Wood Moisture
Equivalent).
If there is any doubt as to the moisture
levels in the subfloor always use an underlay
with integral DPM (Damp Proof Membrane)
and install barrier side down to form a
protective layer.
40% and 60%?
before fitting?
Level-X™ Primer ..................................................P.164
Level-X™ Compound ..........................................P.164
Underlay & Barriers ............................................P.162
Adhesive & Sealants ...........................................P.164
12
FITTING
30/04/2015 12:37
HOW TO CHOOSE
LOC SYSTEM
CLIC SYSTEM
TONGUE AND GROOVE
Although not always viable, fitting is easiest
when you ‘loc’ down the boards in complete
rows rather than individually. When connecting
the header joints, insert the board into the lip
at an angle of 30° then simultaneously move
the board closer and lower into position. The
flooring should ‘loc’ into place. Never use force;
instead remove the board and check for dirt or
excess lacquer then try again.
When installing, align the long edge of the
board first and simply ‘clic’ into position. Using
a tapping block, gently knock the header joint
up towards the previous board until they
snap together. Remember, these instructions
are advisory and you may find that, for you,
installation is still easier if the header joints
are connected prior to the long edges and the
whole run inserted together.
When gluing a tongue and groove board, run
a generous bead of adhesive along the lower
groove of both the long-side and header joint.
This will provide a sufficient bond between
the boards and eliminate squeaking. To fix into
place, slide towards the long edge with the
header joint connected and tighten using a
tapping block or pulling iron as necessary.
FITTING
13
30/04/2015 12:37
HOW TO CHOOSE
INSTALLATION
NAILING DOWN YOUR FLOOR
dried out?
Is the subfloor structurally safe and free
from damp rot, fungal or insect infestation?
Is the subfloor clean, free of chips or
shavings, dry and level to within 3mm over
a 2m area?
Will the subfloor retain a 50mm cleat when
fired into it at 45°?
A traditional tongue and groove wooden floor can be
secret nailed over an existing timber subfloor or (subject
to thickness) fixed directly above joists to provide a
structural floor.
Current building regulations stipulate that a structural floor must exceed
18mm in thickness. Where possible it is recommended that a structural
timber based sheet material is installed over the joists ahead of the flooring
being fitted to avoid any surface irregularities.
Whichever method you use, the subfloor must be of an appropriate
width and thickness to retain a 50mm cleat when fired into it at 45°.
Joists must be kiln dried to avoid cupping or expansion and must be
spaced in accordance with current building regulations (this is
predetermined over joists, but we recommend approximately 300mm
intervals otherwise).
When secret nailing always use the Woodpecker Moistop Barrier Paper over
the subfloor and overlap the joins by a minimum of 200mm. The bitumen
backing self-seals around the punctures formed by nails to maintain a
watertight barrier. It may be necessary to secure the joins with a moisture
resistant tape.
If necessary, have all hot pipes been
insulated to prevent hot spots?
before fitting?
Does the subfloor measure between 7% and
11% WME (Wood Moisture Equivalent)?
Wooden subfloors must have moisture
readings of between 7% and 11% WME
(Wood Moisture Equivalent) and the new
flooring should be left to acclimatize until it
has reached a similar reading so as to prevent
undue expansion or contraction.
40% and 60%?
Flooring should be fitted at 45° or 90° to the subfloor and nailed over every
joist – through the sheet material if applicable. It is possible to have header
joints which are not over a joist providing the boards either side are fully
spanning the joists. Cleats should be no more than 400mm apart.
N.B: Never use adhesive to glue the joints in combination with this method.
Moistop™ Barrier Paper ....................................P.163
14
FITTING
30/04/2015 12:37
HOW TO CHOOSE
FITTING
15
30/04/2015 12:37
HOW TO CHOOSE
INSTALLATION
THE TRICKY BITS
THE FIRST ROW
After determining the best layout of the flooring and the starting wall,
measure the width of the room and divide it by the width of the flooring
panels to determine the number of rows and the width of the last row.
If the last row is determined to be less than 60mm wide, it should be
adjusted by cutting the first row lengthwise.
– Check all panels for possible damages/defects.
– Starting from the left hand corner of the room lay the first row of
flooring with the tongue (T&G) or top lip (Loc/Clic) of the board
facing the wall.
PIPES
– Mark then cut the last panel in the first row to the required length.
Use the remainder of the board to start the second row of flooring
Measure the position of the pipes and mark it on the panel, consider also
the expansion. Take measurements from the spacers into account. Drill a
hole 16mm (5/8”) bigger than the pipe diameter expansion provision. Saw
at a 45 degree angle to the holes. Apply glue to the sawn out piece and fit in
with the pull bar. Again, do not forget the spacers.
– Always make sure the off-cut is at least 200mm in length. If not,
cut another piece greater than 200mm in length.
DOOR JAMB
– Place spacers between the edge of the flooring panels and the wall
to provide an appropriate expansion gap.
– Start all subsequent rows with the off cut piece from the previous row.
N.B: Ensure all the short ends are staggered at least 300mm. It is vital
to maintain a minimum of 300mm between the ends of boards in the
adjacent rows (staggered).
If you have a wooden door jamb, we recommend undercutting the door
jamb according to the thickness of the flooring plus the possible underlay.
Install the flooring underneath the doorjamb but leave the necessary
expansion gaps!
Flooring Profiles .................................................... P.152
Skirting & Pipe Covers .........................................P.161
16
FITTING
30/04/2015 12:37
HOW TO CHOOSE
EXPANSION GAPS
As wood flooring is a natural material, it is subject to shrinkage and
expansion with changes in climate conditions. Therefore, expansion gaps
must be left where a floor meets obstructions such as walls, structural
supports, stairs, fireplaces or pipes. Gaps must always be considered
at doorways to allow for the differing expansion between rooms and
provisions may even be required for very heavy furniture.
To allow for expansion gaps, spacers should be placed at regular
intervals when fitting and then removed before skirting boards or trims
are installed. See our range of trims for concealing the gaps at floor
transitions and edges on pages 152-160.
– When fitting wood flooring (including bamboo) it is necessary to leave
a gap of at least 2mm for every 1m span across the floor. A minimum
gap of 10-15mm is required regardless. For areas that exceed 8 metres
in width (or 5 metres in width for a solid wood floor), additional
provisions should be made for expansion
– Wood flooring always expands more across the width of the boards
than along their length. This is important to consider when boards are
installed in the direction of a room’s width.
– Laminate flooring requires a minimum 8mm of expansion.
– Skirting boards should always be fixed to the wall and must not in any
way obstruct the movement of the floor.
FITTING
17
30/04/2015 12:37
HOW TO CHOOSE
FLOOR HEATING
UNDERFLOOR HEATING
CHOOSING A FLOOR
In general we would always recommend that where underfloor heating
is being used, then a Real Wood Engineered floor should be installed in
preference to a Solid Wood floor due to the increased stability that
a multi-layered construction provides. In particular, the Raglan range is
particularly good for use with underfloor heating as the depth of the board
allows for effective thermal transfer.
Not all timbers react well with underfloor heating so it is important to
choose one of the floors that is recommended for use with underfloor
heating. Each floor in this catalogue carries a recommendation in the
listing next to the product as to its suitability.
Whichever system you choose, the maximum water or electrical element
temperature should not be greater than 50°C and the temperature below the
floor must never exceed 27°C.
TEST YOUR HEATING
Prior to fitting your floor, the underfloor heating should, in the case of a water
heated system, be fully pressurised, tested for leaks and left to run usually for
a fortnight, but certainly until all the moisture in the screed or timber subfloor
has been driven off.
Plaster should be dry and all the wet trades finished in the rooms to which the
flooring is to be fitted. The atmospheric Relative Humidity within the room
should read between 40% and 60%.
CHECK YOUR SUBFLOOR
You must NEVER install underfloor heating over a concrete subfloor
that has a moisture content of more than 75% Relative Humidity (RH).
Ideally we would recommend it to be below 70% RH to give a margin
for error.
FITTING YOUR FLOOR
Your underfloor system should be turned off for at least 48 hours prior to
fitting the floor. Only electrical heating or central heating should be used
during installation.
In the case of timber subfloors, it is important that the moisture content
does not exceed 11% Wood Moisture Equivalent (WME). Make sure
your installer has checked these readings before proceeding.
Engineered tongue and groove floors (subject to suitability of species) should
always be fully adhered to the subfloor using the Woodpecker MS Parquet
(Flexible) Adhesive.
If the measurements exceed the above guidelines, then one of the
Woodpecker damp proof preparation products must be used prior to
installation of the heating system.
An Engineered floor with a glueless locking joint can, in most cases, be floated
over underfloor heating subject to suitability of species. Remember to pick an
underlay that is suitable for use with underfloor heating.
PICK YOUR SYSTEM
There are two main types of system available with many variations from
different manufacturers, but essentially they will either be water heated
or electrically heated systems.
If only part of the subfloor has underfloor heating, the new flooring must not
be laid continuously but separated by dilation joints because flooring installed
over underfloor heating is likely to expand and contract more than flooring
that is not.
In general, water heated systems are normally found in new build or
renovation projects, while electrically heated systems are generally found
in situations where installation is required to be relatively quick and easy.
18
FLOOR HEATING
30/04/2015 12:37
HOW TO CHOOSE
CONCRETE SCREED
WOODPECKER DAMP PROOF MEMBRANE
WOODPECKER UNDERMATE
AFTERCARE
After fitting, the floor should be left for 2–3 days
to fully acclimatise to its new surroundings and if
relevant for any adhesive to fully cure before the
heating is switched on.
When ready, the heating should be raised gently
by 1°C per day from the prevailing ambient
temperature. It must NOT be turned on full
straight away.
1°C per day
Raising and lowering the temperature of your
heating too quickly can result in dimensional
changes to the timber which will cause the floor
to shrink and crack.
FLOOR HEATING
As a general rule, this method of gradually increasing
and decreasing temperatures should be followed in
the day-to-day running of your system. Ideally,
underfloor heating should be left running from the
thermostat all the time and only raised or lowered by
1°C per day to accommodate the different seasons.
MORE INFO
These guidelines are not exhaustive and are provided
to give a general understanding of how the systems
work. They do not replace the need to follow the
recommended fitting procedures of each individual
manufacturer.
19
30/04/2015 12:37
HOW TO CHOOSE
FLOOR CARE
ROUTINE MAINTENANCE
ROUTINE CARE
PROTECTION
We appreciate that hardwood flooring is a major investment for most
people and knowing how to clean and maintain your floor is paramount
in retaining its natural beauty and ensuring longevity.
Prevention rather than cure is the key to a beautiful floor! Consider using
rugs or carpet runners in high traffic areas such as hallways and never
drag furniture or other objects across a wood floor. Woodpecker offers
a variety of felt protectors and castor cups that will allow furniture to be
moved with ease and without marking your floor.
LIGHT CLEANING
Wooden floors can either be swept regularly using a soft bristled broom
or vacuumed frequently to remove any dirt and girt. When vacuuming
your floor, it is advisable to use a soft brush attachment to minimise
scratching.
PETS
Wooden floors hold many advantages for pet owners but inevitably
animals can damage your floor. Keep claws trim to prevent scratches
and mop any ‘accidents’ immediately to avoid staining. Opting for a light
coloured floor will minimise the appearance of scratches, while an oiled
finish will allow you to easily carry out spot repairs if necessary.
SPILLAGES
Since water and wood are natural enemies, any spillages should be
removed promptly! While small drops of water may not harm your floor,
excessive amounts of water left sitting on the boards are likely to cause
lasting damage.
SHOES
As a rule of thumb, stilettos should be left at the front door and heavy
shoes avoided! High heels and stilettos in particular, exert a phenomenal
pressure that even the toughest of timber species struggle to withstand.
SUNLIGHT
Exposure to direct sunlight will cause your floor to mellow in colour
over time. Red woods like Merbau, Jatoba, Cherry etc., are particularly
susceptible to colour change. Be sure to frequently move rugs and
mats placed in these areas to ensure the floor colour matures evenly.
20
FLOOR CARE
FLOOR MATS
Install good quality floor mats at each entrance to trap dirt and prevent
damage. Grit underfoot will act like sandpaper against your floor.
Woodpecker Coir Matting is an ideal entrance barrier for wet and dirty feet.
See Page
CLEANING PRICE LIST
Woodpecker Cleaning Kit
77-WKO-001
Oiled Floors
77-WKL-001
Lacquered / Laminate
£30.95
£30.95
P.167
P.167
Woodpecker Cleaner Refill
77-WOC-001
Oiled Floors
77-WLC-001
Lacquered / Laminate
77-WRC-001
Washable Mop Head
£12.50
£12.50
£12.50
P.167
P.167
P.167
Woodpecker One Coat Soap
81-OCS-002
Oiled Floors (2 Litre)
£43.95
P.166
£4.95
£4.95
£4.95
£11.95
£7.95
P.167
P.167
P.167
P.167
P.167
Heavy Duty (Self Adhesive) Felt Pads
05-FFP-951
Round (19mm)
05-FFP-952
Round (25mm)
05-FFP-953
Round (38mm)
05-FFP-947
Multi-pack (various sizes)
05-FFP-950
2 pads (113x153mm)
30/04/2015 12:37
HOW TO CHOOSE
MOPPING
Always use a well wrung mop when wiping your
hardwood floor. Excess liquid has the potential
to seep down the joins in a floor and cause
permanent damage.
Specially formulated for Woodpecker floors are
our comprehensive Cleaning Kits, containing an
antistatic mop, cleaning fluid and trigger head
spray bottle for easy application. The cleaning kits
are offered for both lacquered and oiled finishes,
with product refills available as necessary.
FLOOR CARE
In addition to the above kits, Woodpecker One
Coat Soap is a concentrated cleaning solution
exclusively for oiled floors. Once diluted, it is applied
in a similar fashion to the above. Repeated use
of Woodpecker products on oiled floors will help
develop an invisible film, offering extra protection
and increased resistance to dirt.
Floor Care ...............................................................P.166
21
30/04/2015 12:38
HOW TO CHOOSE
FLOOR CARE
LONG–TERM MAINTENANCE
LONG-TERM CARE
OILED FLOORS
Despite using some of the most advanced finishing products and
techniques on the market, a hardwood floor will not withstand the brunt
of daily life forever. Eventually, even the most well-tended of surfaces will
require a little extra maintenance.
Unlike a lacquered floor, an oiled surface allows for isolated areas of damage,
such as scratches and stains, to be easily re-touched without having to re-oil
the entire floor. Although easier to repair, they usually require earlier periodic
maintenance.
It is important to maintain an existing floor finish in good time. If you
allow the protective coat to wear away, it becomes susceptible to dirt
and water which can penetrate the surface of the wood making the
floor difficult to clean and quickly subdued. Routine maintenance is
particularly important for floors with distinctive finishes, as sanding
will take out all traces of an existing stain or texture.
ONE COAT SOAP
Due to individual circumstance, it is impossible to recommend how
often you should renew your floor finish but as a preventative measure,
you may wish to recoat the floor every 2–3 years. To perform a basic
evaluation of your floor finish, select a high traffic area and pour a few
drops of water onto the floor. A well finished floor will force beads of
water to form on the surface suggesting that no maintenance is required.
If the water slowly soaks into the timber leaving behind a light saturation
mark, the finish is only partially effective and a new coat of lacquer or
oil should be applied. Alternatively, if the water is immediately absorbed
leaving behind a dark stain, it indicates that the finish has completely
worn and the floor may need to be sanded and recoated.
Methods of repair will differ depending on whether your chosen floor
was pre-treated with an oil or polyurethane lacquer. If you are unsure,
as a general rule of thumb a lacquered floor is typically smooth and
shiny while an oiled floor has a matt finish and subtle texture.
However, before any surface treatment is carried out, we always
recommend that an adhesion test is performed in an inconspicuous
area to determined compatibility.
Unfortunately, a laminate floor cannot be repaired in the same way that a
hardwood floor can, however, small chips and scratches can be concealed
using the Colourfill Repair Kit. The kit is supplied together with a solvent to
clean the affected areas before filling and to remove excess filler afterwards.
22
FLOOR CARE
The One Coat Soap is a concentrated cleaning solution specially designed
for oiled floors. When diluted with 150mls of water, it can be used in the
same fashion as the Woodpecker Maintenance Kits. However, on occasion
it can also be used as neat solution to perform a deep clean. If this fails
to revive the floors natural lustre then you will need to consider re-oiling
your floor.
ONE COAT CLEANER
Before re-oiling all or part of your floor, it is essential that the wood is
free from dust and contamination to ensure adhesion. Applying a small
amount of the One Coat Cleaner to a dry cloth is sufficient enough to
intensively clean the affected area. It also allows for any dust to be collected
electro-statically. Drying times will vary from 15–60 minutes depending
on saturation. If the floor remains soiled, you will have to consider sanding
the surface to remove the engrained dirt.
ONE COAT OIL
Using a cotton cloth, brush or squeegee, the oil is applied sparely and
evenly to the floor and worked into the wood along the grain. The oil only
needs 60 seconds to react with the floor and the excess must be rubbed off
within 15–20 minutes of application, until practically dry. With such a quick
response time required, it is important not to expand treated areas beyond
your resources. One Coat Oil is also suitable for commercial properties
without the need for multiple coats. Its ability to re-disperse on the surface
of the wood also eliminates tide marks and any signs of overlapping.
Approximately 24–36 hours after application, the floor is suitable for
foot traffic.
30/04/2015 12:38
HOW TO CHOOSE
LACQUERED FLOORS
Small indentations and isolated scratches can be concealed and
recoated using the Woodpecker Touch-Up Lacquer. Before application,
ensure that the area in question is dry and free from dirt, dust or grease.
Using the brush applicator supplied within the lid, paint the lacquer
onto the affected area and leave to cure.
To disguise deeper scratches or gouges, you many need to use a
professional wood floor filler. Available in a wide variety of colours from
most hardware or flooring retailers, these pastes are applied to the
damaged area, left to cure, sanded flush and later sealed using the
Touch-Up Lacquer to maintain a protective shell.
When it comes to restoring your entire floor, the Ultimo Lacquer is available
in two grades to cater for both domestic and commercial environments.
A factory lacquered floor will not need to be sanded back prior to application,
however, previously re-lacquered surfaces must be lightly sanded to ensure
sufficient adhesion.
Unlike an oiled floor, the lacquer doesn’t penetrate the surface of the wood
so the entire floor must be re-lacquered to prevent the formation of ridges.
Best results are achieved using a roller. A single coat is sufficient enough to
protect against moisture although several coats may be applied if the floor is
subject to high levels of foot traffic. When coating unfinished timber, three
coats of lacquer are required. Between each coat of lacquer, the floor must
be sanded, vacuumed and wiped with a damp cloth before re-coating.
The lacquer will take about 1–2 hours to dry between applications.
After 24 hours the floor is suitable for light foot traffic, although the
surface will continue to cure for 7 days before rugs can be replaced.
Floor Care ...............................................................P.166
FLOOR CARE
23
30/04/2015 12:38
SOLID WOOD
SOLID WOOD
TIMELESS ELEGANCE AND CHARM
For centuries timber has been used as the flooring material of
choice. It evokes an atmosphere of timeless elegance and charm,
making it an inviting addition to any environment. Its distinctive
character radiates warmth which further substantiates its
enduring beauty.
At Woodpecker we only select the best quality timber, harvested
from sustainably managed forests throughout Europe and the
Americas. Each board is engineered from a single piece of timber
that is carefully chosen, graded, and then precision-machined
with a tongue and groove joint on all sides to ensure your floor is
held securely.
24
RRP_15_solid_section.indd 24
SOLID WOOD
Wood is permeable, meaning it takes on and gives off moisture
which in turn will cause it to expand or contract. We strongly
recommend that you use an experienced floor fitter who has the
necessary experience and equipment to test the atmospheric and
subfloor moisture levels in your property prior to installation. If
the prevailing conditions are accounted for, you will end up with a
floor that is entirely to your satisfaction.
30/04/2015 12:57
5 COATS OF DURABLE UV LACQUER / OIL
MANUFACTURED FROM SOLID OAK
SOLID WOOD
TONGUE AND GROOVE JOINT
STRESS GROOVES
YORK
YORK
TRADITIONAL, RESILIENT AND AFFORDABLE
As an Oak or Walnut the York range takes its inspiration from the
city fortifications of the same name. Every Englishman’s home is his
castle and this range will see you through war and peace, providing
comfort whilst laying a solid foundation for future living.
TRIMS AVAILABLE See Pages 152-8
Page 26
Page 27
Page 28
Page 29
•
•
•
•
Available in European Oak or American Black Walnut
Finished with 5 coats of high-wear UV lacquer or oil
Machined with a traditional tongue and groove joint
Detailed installation guidance available on pages 8-23
BEVELLED EDGES
Page 30
Page 32
SOLID WOOD
25
30/04/2015 12:57
York Oak
Select Plank
SOLID WOOD
YORK
York Oak Select
Brushed & Lacquered
36-YBM-004
Beautiful mellow colours...
£59.95/m 2
£49.96 /m
2
EX VAT
TYPE OF FLOOR
Solid Wood
TYPE OF JOINT
Tongue and Groove
THICKNESS
18mm
BEVELS ON EDGES
All 4 edges
LENGTH X WIDTH
300–1500mm x 130mm
METHOD OF FIXING
Stick down or secret nail
UNDERFLOOR HEATING
Not advised
HARDNESS
Hard
TRIM CODE
High O
average length 700mm
26
PACK SIZE
2.29m2
PLANKS PER PACK
Variable
TYPE OF FINISH
Brushed & UV Matt Lacquered
GRADE
Select
SOLID WOOD
30/04/2015 12:57
York Oak
Rustic Plank
SOLID WOOD
YORK
York Oak Lacquered
36-YOR-001
£50.95/m 2
£42.46/m2 EX VAT
Sourced from extensive Oak forests
across Europe...
York Oak Oiled
36-YRO-001
£51.95/m 2
£43.29/m2 EX VAT
TYPE OF FLOOR
Solid Wood
TYPE OF JOINT
Tongue and Groove
THICKNESS
18mm
BEVELS ON EDGES
All 4 edges
LENGTH X WIDTH
300–1500mm x 130mm
METHOD OF FIXING
UNDERFLOOR HEATING
Not advised
HARDNESS
Hard
TRIM CODE
High O
PACK SIZE
2.29m2
PLANKS PER PACK
Variable
TYPE OF FINISH
UV Lacquered / UV Oiled
GRADE
Rustic
SOLID WOOD
27
30/04/2015 12:57
York Antique Oak
Handscraped
Plank
SOLID WOOD
YORK
York Antique Oak
Handscraped
36-YOA-003
Hand scraped to add character and charm...
£59.95/m 2
£49.96/m
2
EX VAT
TYPE OF FLOOR
Solid Wood
TYPE OF JOINT
Tongue and Groove
THICKNESS
18mm
BEVELS ON EDGES
All 4 edges
LENGTH X WIDTH
300–1500mm x 130mm
METHOD OF FIXING
UNDERFLOOR HEATING
Not advised
HARDNESS
Hard
TRIM CODE
High 9
28
PACK SIZE
2.29m2
PLANKS PER PACK
Variable
TYPE OF FINISH
UV Lacquered
GRADE
Rustic
SOLID WOOD
30/04/2015 12:57
York Walnut
Plank
SOLID WOOD
YORK
York Walnut Lacquered
Swirling colours of dark chocolate and honey...
36-YWR-001
£83.95/m 2
£69.96/m2 EX VAT
TYPE OF FLOOR
Solid Wood
TYPE OF JOINT
Tongue and Groove
THICKNESS
18mm
BEVELS ON EDGES
All 4 edges
LENGTH X WIDTH
300–1500mm x 130mm
METHOD OF FIXING
UNDERFLOOR HEATING
Not advised
HARDNESS
Medium
TRIM CODE
Medium W
PACK SIZE
2.29m2
PLANKS PER PACK
Variable
TYPE OF FINISH
UV Matt Lacquered
GRADE
Rustic
SOLID WOOD
29
30/04/2015 12:57
SOLID WOOD
YORK
Sandy tones and striking white grains...
30
SOLID WOOD
30/04/2015 12:57
York White
Washed Plank
Solid Wood
THICKNESS
18mm
LENGTH X WIDTH
300–1500mm x 130mm
SOLID WOOD
TYPE OF FLOOR
2.29m2
PLANKS PER PACK
Variable
TYPE OF FINISH
GRADE
Rustic
TYPE OF JOINT
Tongue and Groove
BEVELS ON EDGES
All 4 edges
METHOD OF FIXING
UNDERFLOOR HEATING
Not advised
HARDNESS
Hard
TRIM CODE
High 22
YORK
PACK SIZE
York White Washed
36-YWW-001
£59.95/m 2
£49.96/m2 EX VAT
SOLID WOOD
31
30/04/2015 12:57
York Grey
Washed Plank
SOLID WOOD
YORK
York Grey Washed
36-YGW-001
Cool, ashen hues...
£59.95/m 2
£49.96/m
2
EX VAT
TYPE OF FLOOR
Solid Wood
TYPE OF JOINT
Tongue and Groove
THICKNESS
18mm
BEVELS ON EDGES
All 4 edges
LENGTH X WIDTH
300–1500mm x 130mm
METHOD OF FIXING
UNDERFLOOR HEATING
Not advised
HARDNESS
Hard
TRIM CODE
High 7
32
PACK SIZE
2.29m2
PLANKS PER PACK
Variable
TYPE OF FINISH
GRADE
Rustic
SOLID WOOD
30/04/2015 12:57
HIGH WEAR RESISTANT UV LACQUER
SOLID WOOD
SOLID OAK ENGINEERED CORE
GLUELESS LOC JOINT
FLINK
FLINK
UNIQUE, VERSATILE AND INNOVATIVE
Flink is a clever product; in fact it’s the only one of its kind on the
market. Engineered from 3 layers of solid oak, it offers a level of stability
unrivalled by a conventional solid oak floor. Its pioneering design helps
to eliminate some of the difficulties posed by a damp subfloor*.
•
•
•
•
Completely solid all the way through but engineered for stability
Patented ‘drop and lock’ joint for quick and easy fitting
Brushed then lacquered for a beautifully textured high-wear finish
A completely unique product – exclusive to Woodpecker
Page 34
Page 36
Page 37
Page 38
*Detailed instructions are provided in each
pack as to the installation procedures and
precautions which must be taken.
SOLID WOOD
33
30/04/2015 12:57
SOLID WOOD
FLINK
Beautiful textured surface processed
with 5 surface finishes...
34
SOLID WOOD
30/04/2015 12:58
Flink Whitened
Oak Plank
Engineered Solid Oak
THICKNESS
14mm
LENGTH X WIDTH
300–1200mm x 125mm
PACK SIZE
1.5m2
PLANKS PER PACK
Variable
TYPE OF FINISH
GRADE
Rustic
TYPE OF JOINT
Glueless Loc
BEVELS ON EDGES
All 4 edges
METHOD OF FIXING
Floated
UNDERFLOOR HEATING
Not advised
HARDNESS
Hard
TRIM CODE
Medium 22
SOLID WOOD
TYPE OF FLOOR
FLINK
Flink Whitened Oak
76-ONL-200
£68.95/m 2
£57.46/m2 EX VAT
Stable, practical and easy to fit...
SOLID WOOD
35
30/04/2015 12:58
Flink Natural
Oak Plank
SOLID WOOD
FLINK
Flink Natural Oak
76-ORL-200
Individual character leading to a quiet grove…
£67.95/m 2
£56.63/m
2
EX VAT
36
TYPE OF FLOOR
TYPE OF JOINT
Glueless Loc
THICKNESS
14mm
BEVELS ON EDGES
All 4 edges
LENGTH X WIDTH
300–1200mm x 125mm
METHOD OF FIXING
Floated
PACK SIZE
1.5m2
UNDERFLOOR HEATING
Not advised
PLANKS PER PACK
Variable
HARDNESS
Hard
TYPE OF FINISH
TRIM CODE
Medium O
GRADE
Rustic
SOLID WOOD
30/04/2015 12:58
Flink Dark Oak
Plank
SOLID WOOD
FLINK
Flink Dark Oak
Reaching standards of precision not previously seen...
76-OCL-200
£68.95/m 2
£57.46/m2 EX VAT
TYPE OF FLOOR
TYPE OF JOINT
Glueless Loc
THICKNESS
14mm
BEVELS ON EDGES
All 4 edges
LENGTH X WIDTH
300–1200mm x 125mm
METHOD OF FIXING
Floated
PACK SIZE
1.5m2
UNDERFLOOR HEATING
Not advised
PLANKS PER PACK
Variable
HARDNESS
Hard
TYPE OF FINISH
TRIM CODE
Medium 1
GRADE
Rustic
SOLID WOOD
37
30/04/2015 12:58
SOLID WOOD
FLINK
Deluxe, matured tones…
38
SOLID WOOD
30/04/2015 12:58
Flink Oak Cognac
Plank
THICKNESS
14mm
LENGTH X WIDTH
300–1200mm x 125mm
PACK SIZE
1.5m2
PLANKS PER PACK
Variable
TYPE OF FINISH
GRADE
Rustic
TYPE OF JOINT
Glueless Loc
BEVELS ON EDGES
All 4 edges
METHOD OF FIXING
Floated
UNDERFLOOR HEATING
Not advised
HARDNESS
Hard
TRIM CODE
Medium 17
SOLID WOOD
TYPE OF FLOOR
FLINK
Flink Oak Cognac
76-OWL-200
£68.95/m 2
£57.46/m2 EX VAT
Stable, practical and easy to fit...
SOLID WOOD
39
30/04/2015 12:58
ENGINEERED WOOD
ENGINEERED WOOD
STABILITY WITH DESIGN
The increasing popularity of wooden floors in modern homes
has led to significant challenges. Contemporary housing is
almost always centrally heated, often leading to relatively low
atmospheric moisture. Advancements in subfloor materials and
the growing popularity of underfloor heating have all made it
necessary for increasingly sophisticated floors.
Engineered floors offer greater variety of design due to their
layered construction. Typically formed in three tiers, the chosen
species shapes the top wear layer; a central core (softwood, high
density fibreboard or plywood) adds stability and a balancing
veneer completes the construction. The top wear layer can vary
from 2.5mm to 6mm depending on the product.
A real-wood engineered floor is the most versatile choice as
it responds well to underfloor heating, has all the aesthetic
benefits of a solid wood floor, but eliminates many of the practical
drawbacks posed by solid timber. Manufactured using cutting
edge technology, all wastage is kept to a minimum in line with our
commitment to sustainability.
40
RRP_15_Engineered_Section.indd 40
30/04/2015 13:08
5 COATS OF UV LACQUER/OIL
2.5MM WEAR LAYER
HDF CORE
GLUELESS LOC JOINT
RAGLAN
Beautiful French-influenced design did not stop Raglan from being
the last castle to surrender whilst under siege during the English
Civil War. The wooden planks of this range emulate the castle technologically advanced and durable, yet beautiful to look at.
•
•
•
•
ENGINEERED WOOD
BEAUTIFUL, PRACTICAL AND DURABLE
Thickness specification works well with underfloor heating
High Density Fibreboard (HDF) core for added stability
Patented glueless ‘Loc’ system for easy installation
Available in Oak, Maple or Walnut
RAGLAN
PERFECT FOR USE WITH
UNDERFLOOR HEATING
GLUELESS LOC SYSTEM
Page 42
Page 44
Page 45
Page 46
Page 48
Page 49
Page 50
Page 51
Page 52
10.5mm
41
30/04/2015 13:08
Raglan Oak
Rustic Plank
TYPE OF FLOOR
Real Wood Engineered
THICKNESS
10.5mm (wear layer 2.5mm)
LENGTH X WIDTH
1860mm x 148mm
PACK SIZE
2.2m2
PLANKS PER PACK
8
TYPE OF FINISH
UV Lacquered / UV Oiled /
ENGINEERED WOOD
RAGLAN
GRADE
Rustic
TYPE OF JOINT
Glueless Loc
BEVELS ON EDGES
All 4 edges
METHOD OF FIXING
Floated
UNDERFLOOR HEATING
Suitable
TOG RATING
1.09
HARDNESS
Hard
TRIM CODE
Medium O
Raglan Oak Lacquered
34-ORL-001
£45.95/m 2
£38.29/m2 EX VAT
Raglan Oak Oiled
34-ORO-001
£46.95/m 2
£39.13/m2 EX VAT
Raglan Oak Brushed
& Lacquered
34-OBL-001
£47.95/m 2
£39.96/m2 EX VAT
42
30/04/2015 13:08
ENGINEERED WOOD
RAGLAN
Nimble cocoa swirls, right at your feet…
43
30/04/2015 13:08
Raglan Oak
Lacquered 3-Strip*
ENGINEERED WOOD
RAGLAN
Raglan Oak Lacquered
3-Strip
34-HOE-300
Golden ripples of natural detail…
£33.95/m 2
£28.29/m
2
EX VAT
TYPE OF FLOOR
TYPE OF JOINT
Glueless Loc
THICKNESS
BEVELS ON EDGES
None
LENGTH X WIDTH
1090mm x 182mm
METHOD OF FIXING
Floated
PACK SIZE
2.18m2
UNDERFLOOR HEATING
Suitable
PLANKS PER PACK
11
TOG RATING
1.09
TYPE OF FINISH
UV Lacquered
HARDNESS
Hard
GRADE
Rustic
TRIM CODE
Medium O
*Previously Harlech Eco-Oak 3-Strip
44
30/04/2015 13:08
Raglan Oak White
Oiled Plank
ENGINEERED WOOD
RAGLAN
Raglan Oak White Oiled
Dappled light sandy strokes, evoking a holiday ambience…
TYPE OF FLOOR
TYPE OF JOINT
Glueless Loc
THICKNESS
BEVELS ON EDGES
All 4 edges
LENGTH X WIDTH
1860mm x 148mm
METHOD OF FIXING
Floated
PACK SIZE
2.2m2
UNDERFLOOR HEATING
Suitable
PLANKS PER PACK
8
TOG RATING
1.09
TYPE OF FINISH
UV Oiled
HARDNESS
Hard
GRADE
Rustic
TRIM CODE
Medium 6
34-OWO-001
£53.95/m 2
£44.96/m2 EX VAT
45
30/04/2015 13:08
Raglan Oak
Antique Plank
ENGINEERED WOOD
TYPE OF FLOOR
THICKNESS
LENGTH X WIDTH
1860mm x 148mm
PACK SIZE
2.2m2
PLANKS PER PACK
8
TYPE OF FINISH
UV Oiled
GRADE
Rustic
TYPE OF JOINT
Glueless Loc
BEVELS ON EDGES
All 4 edges
METHOD OF FIXING
Floated
UNDERFLOOR HEATING
Suitable
TOG RATING
1.09
HARDNESS
Hard
TRIM CODE
Medium 11
RAGLAN
Raglan Oak Antique Oiled
34-OAO-001
£53.95/m 2
£44.96/m2 EX VAT
46
30/04/2015 13:08
ENGINEERED WOOD
RAGLAN
A complex and achieved timber,
aged to a sumptuous finish...
47
30/04/2015 13:08
Raglan Oak
Cognac Plank
ENGINEERED WOOD
RAGLAN
Raglan Oak Cognac
Brushed & Lacquered
34-ORC-001
Smooth, molten shades of Autumn…
£53.95/m 2
£44.96/m
2
EX VAT
48
TYPE OF FLOOR
TYPE OF JOINT
Glueless Loc
THICKNESS
BEVELS ON EDGES
All 4 edges
LENGTH X WIDTH
1860mm x 148mm
METHOD OF FIXING
Floated
PACK SIZE
2.2m2
UNDERFLOOR HEATING
Suitable
PLANKS PER PACK
8
TOG RATING
1.09
TYPE OF FINISH
HARDNESS
Hard
GRADE
Rustic
TRIM CODE
Medium 23
30/04/2015 13:08
Raglan Oak White
Smoked Plank
ENGINEERED WOOD
White chocolate in effect, brushed for subtle texture…
TYPE OF FLOOR
TYPE OF JOINT
Glueless Loc
THICKNESS
BEVELS ON EDGES
All 4 edges
LENGTH X WIDTH
1860mm x 148mm
METHOD OF FIXING
Floated
PACK SIZE
2.2m2
UNDERFLOOR HEATING
Suitable
PLANKS PER PACK
8
TOG RATING
1.09
TYPE OF FINISH
HARDNESS
Hard
GRADE
Rustic
TRIM CODE
Medium 5
RAGLAN
Raglan White Smoked
Brushed & Lacquered
34-OWS-001
£53.95/m 2
£44.96/m2 EX VAT
49
30/04/2015 13:08
Raglan Oak
Coffee Plank
ENGINEERED WOOD
RAGLAN
Raglan Oak Coffee
Brushed & Lacquered
34-OCL-001
Elegant yet hard wearing, stylish in essence…
£53.95/m 2
£44.96/m
2
EX VAT
50
TYPE OF FLOOR
TYPE OF JOINT
Glueless Loc
THICKNESS
BEVELS ON EDGES
All 4 edges
LENGTH X WIDTH
1860mm x 148mm
METHOD OF FIXING
Floated
PACK SIZE
2.2m2
UNDERFLOOR HEATING
Suitable
PLANKS PER PACK
8
TOG RATING
1.09
TYPE OF FINISH
HARDNESS
Hard
GRADE
Rustic
TRIM CODE
Medium 3
30/04/2015 13:08
Raglan Maple
Select Plank
ENGINEERED WOOD
34-MAL-002
Fresh and bright in nature…
£59.95/m 2
£49.96/m2 EX VAT
TYPE OF FLOOR
TYPE OF JOINT
Glueless Loc
THICKNESS
BEVELS ON EDGES
All 4 edges
LENGTH X WIDTH
1200mm x 125mm
METHOD OF FIXING
Floated
PACK SIZE
1.05m2
UNDERFLOOR HEATING
Not Advised
PLANKS PER PACK
7
TOG RATING
1.12
TYPE OF FINISH
UV Matt Lacquered
HARDNESS
Hard
GRADE
Select
TRIM CODE
Medium M
RAGLAN
Raglan Maple Select
Lacquered
51
30/04/2015 13:08
Raglan Walnut
Plank
ENGINEERED WOOD
RAGLAN
Raglan Walnut Lacquered
34-WAL-002
Exotic and rich boards…
£64.95/m 2
£54.13/m
2
EX VAT
52
TYPE OF FLOOR
TYPE OF JOINT
Glueless Loc
THICKNESS
BEVELS ON EDGES
All 4 edges
LENGTH X WIDTH
1200mm x 125mm
METHOD OF FIXING
Floated
PACK SIZE
1.05m2
UNDERFLOOR HEATING
Suitable
PLANKS PER PACK
7
TOG RATING
1.1
TYPE OF FINISH
UV Matt Lacquered
HARDNESS
Medium
GRADE
Rustic
TRIM CODE
Medium W
30/04/2015 13:08
4MM WEAR LAYER
ENGINEERED SOFTWOOD CORE
HARLECH
Where once sea lapped the castle walls and bold defenders were
immortalised in song, Harlech is a well-known stronghold of
symbolic and historical importance. Our range humbly exemplifies
its culture as our most practical, valuable and popular wood floor.
•
•
•
•
ENGINEERED WOOD
ELEGANT, PRACTICAL AND VERSATILE
Respectable 4mm solid hardwood top layer
Finishes include lacquered, oiled or brushed & lacquered
12 natural or stained floors to complement most decors
Compatible with underfloor heating when stuck down
HARLECH
Page 54
Page 56
Page 57
Page 58
FLOOR CARE See Page 166
Page 60
Page 61
Page 62
Page 63
Page 64
Page 66
15mm
53
30/04/2015 13:09
Harlech Oak
Rustic Plank
TYPE OF FLOOR
THICKNESS
15mm (wear layer 4mm)
LENGTH X WIDTH
1860mm x 148mm
Packs may include cut lengths
PACK SIZE
1.65m2
PLANKS PER PACK
6
TYPE OF FINISH
UV Oiled / Brushed & UV
Matt Lacquered
ENGINEERED WOOD
HARLECH
GRADE
Rustic
TYPE OF JOINT
Tongue and Groove
BEVELS ON EDGES
All 4 edges
METHOD OF FIXING
Floated, nailed or stuck down
UNDERFLOOR HEATING
Suitable if fully stuck down
TOG RATING
1.13
HARDNESS
Hard
TRIM CODE
Medium O
Harlech Oak Oiled
35-HOC-148
£50.95/m 2
£42.46/m2 EX VAT
Harlech Oak
Brushed & Lacquered
35-HOB-001
£53.95/m 2
£44.96/m2 EX VAT
54
30/04/2015 13:09
ENGINEERED WOOD
HARLECH
Focused in nature, engineered to last…
55
30/04/2015 13:09
Harlech White
Smoked Plank
ENGINEERED WOOD
HARLECH
Harlech Oak White
Smoked Brushed &
Lacquered
Sophisticated, elegant with the allure
of the unexpected...
35-HWS-001
£64.95/m 2
£54.13/m2 EX VAT
TYPE OF FLOOR
TYPE OF JOINT
Tongue and Groove
THICKNESS
BEVELS ON EDGES
All 4 edges
LENGTH X WIDTH
1860mm x 148mm
METHOD OF FIXING
UNDERFLOOR HEATING
TOG RATING
1.13
HARDNESS
Hard
TRIM CODE
Medium 22
56
PACK SIZE
1.65m2
PLANKS PER PACK
6
TYPE OF FINISH
GRADE
Rustic
30/04/2015 13:09
Harlech Oak
White Oiled
Plank
ENGINEERED WOOD
Harlech Oak White Oiled
35-HWO-148
£62.95/m 2
£52.46/m2 EX VAT
TYPE OF FLOOR
TYPE OF JOINT
Tongue and Groove
THICKNESS
BEVELS ON EDGES
All 4 edges
LENGTH X WIDTH
1860mm x 148mm
METHOD OF FIXING
UNDERFLOOR HEATING
TOG RATING
1.13
HARDNESS
Hard
TRIM CODE
Medium 6
PACK SIZE
1.65m2
PLANKS PER PACK
6
TYPE OF FINISH
UV Oiled
GRADE
Rustic
HARLECH
5 coats of the chosen finish give
maximum wear...
57
30/04/2015 13:09
Harlech Limed
Oak Plank
TYPE OF FLOOR
THICKNESS
LENGTH X WIDTH
1860mm x 189mm
ENGINEERED WOOD
HARLECH
PACK SIZE
2.1m2
PLANKS PER PACK
6
TYPE OF FINISH
GRADE
Rustic
TYPE OF JOINT
Tongue and Groove
BEVELS ON EDGES
All 4 edges
METHOD OF FIXING
UNDERFLOOR HEATING
TOG RATING
1.13
HARDNESS
Hard
TRIM CODE
Medium 22
Harlech Limed Oak
Brushed & Lacquered
35-HLO-001
£61.95/m 2
£51.63/m2 EX VAT
58
30/04/2015 13:09
ENGINEERED WOOD
HARLECH
Tumbling hues of sun and sand…
59
30/04/2015 13:09
Harlech Antique
Oiled Plank
ENGINEERED WOOD
HARLECH
Harlech Oak Antique Oiled
35-HAN-148
With its long
Timeless
stylelengths
with a character
and bevelled
of edges...
its own…
£62.95/m 2
£52.46/m
2
EX VAT
TYPE OF FLOOR
TYPE OF JOINT
Tongue and Groove
THICKNESS
BEVELS ON EDGES
All 4 edges
LENGTH X WIDTH
1860mm x 148mm
METHOD OF FIXING
UNDERFLOOR HEATING
TOG RATING
1.13
HARDNESS
Hard
TRIM CODE
Medium 11
60
PACK SIZE
1.65m2
PLANKS PER PACK
6
TYPE OF FINISH
UV Oiled
GRADE
Rustic
30/04/2015 13:09
Harlech Walnut
Plank
ENGINEERED WOOD
Combining choice with beauty and practicality...
HARLECH
Harlech Walnut
Lacquered
35-HWL-001
£79.95/m 2
£66.63/m2 EX VAT
TYPE OF FLOOR
TYPE OF JOINT
Tongue and Groove
THICKNESS
BEVELS ON EDGES
All 4 edges
LENGTH X WIDTH
1860mm x 148mm
METHOD OF FIXING
UNDERFLOOR HEATING
TOG RATING
1.19
HARDNESS
Medium
TRIM CODE
Medium W
PACK SIZE
1.65m2
PLANKS PER PACK
6
TYPE OF FINISH
UV Lacquered
GRADE
Rustic
61
30/04/2015 13:09
Harlech Oak
Wide Plank
ENGINEERED WOOD
HARLECH
Harlech Oak Oiled
(Wide)
35-HRO-001
Bringing nature right into your room...
£53.95/m 2
£44.96/m
2
EX VAT
TYPE OF FLOOR
TYPE OF JOINT
Tongue and Groove
THICKNESS
BEVELS ON EDGES
All 4 edges
LENGTH X WIDTH
1860mm x 189mm
METHOD OF FIXING
UNDERFLOOR HEATING
TOG RATING
1.13
HARDNESS
Hard
TRIM CODE
Medium O
62
PACK SIZE
2.1m2
PLANKS PER PACK
6
TYPE OF FINISH
UV Oiled
GRADE
Rustic
30/04/2015 13:09
Harlech Select
Oak Plank
ENGINEERED WOOD
Harlech Select Oak
Lacquered
35-HOL-001
£59.95/m 2
£49.96/m2 EX VAT
Traditional tongue and groove on
4 edges for maximum stability...
35-HOO-005
£59.95/m 2
£49.96/m2 EX VAT
TYPE OF FLOOR
TYPE OF JOINT
Tongue and Groove
THICKNESS
BEVELS ON EDGES
All 4 edges
LENGTH X WIDTH
1860mm x 189mm
METHOD OF FIXING
UNDERFLOOR HEATING
TOG RATING
1.13
HARDNESS
Hard
TRIM CODE
Medium O
PACK SIZE
2.1m2
PLANKS PER PACK
6
TYPE OF FINISH
GRADE
Select
HARLECH
Harlech Select Oak
Oiled
63
30/04/2015 13:09
Harlech Smoked
Oak Plank
TYPE OF FLOOR
THICKNESS
LENGTH X WIDTH
1860mm x 189mm
ENGINEERED WOOD
HARLECH
PACK SIZE
2.1m2
PLANKS PER PACK
6
TYPE OF FINISH
UV Oiled
GRADE
Rustic
TYPE OF JOINT
Tongue and Groove
BEVELS ON EDGES
All 4 edges
METHOD OF FIXING
UNDERFLOOR HEATING
TOG RATING
1.13
HARDNESS
Hard
TRIM CODE
Medium 2
Harlech Smoked Oak Oiled
35-HSO-001
£58.95/m 2
£49.13/m2 EX VAT
64
30/04/2015 13:09
ENGINEERED WOOD
HARLECH
Eternally experienced, this timber has
witnessed history…
65
30/04/2015 13:09
Harlech Oak
Cognac Plank
ENGINEERED WOOD
HARLECH
Harlech Oak Cognac
Brushed & Lacquered
Harlech captures the full tradition
of wood flooring...
35-HOC-001
£62.95/m 2
£52.46/m2 EX VAT
TYPE OF FLOOR
TYPE OF JOINT
Tongue and Groove
THICKNESS
BEVELS ON EDGES
All 4 edges
LENGTH X WIDTH
1860mm x 148mm
METHOD OF FIXING
UNDERFLOOR HEATING
TOG RATING
1.13
HARDNESS
Hard
TRIM CODE
Medium 4
66
PACK SIZE
1.65m2
PLANKS PER PACK
6
TYPE OF FINISH
GRADE
Rustic
30/04/2015 13:09
4MM WEAR LAYER
5 COATS OF UV OIL
ENGINEEERED PLYWOOD CORE
BERKELEY
The bastion commanding the Berkeley area has a violent history, full
of legends and mysteries, yet it has lived on in the same family for
24 generations. We don’t expect you to wait as long for a floor of
the same character, so each Berkeley board is aged and distressed
to imitate this great heritage.
•
•
•
•
•
Sympathetically aged and antiqued for a characterful finish
Lovingly hand-scraped to emulate the footfall of thousands of feet
Double smoked to create its inviting and warm bourbon tones*
Each board encounters 7 stages in achieving its period accents
Compatible with underfloor heating when fully stuck-down
ENGINEERED WOOD
INVITING, DISTINCTIVE AND VINTAGE
BERKELEY
AGED AND DISTRESSED FINISH
Page 68
Page 70
Page 71
Page 72
Page 74
Page 75
Page 76
Page 78
15mm
* excludes Berkeley
Distressed Natural Oak
67
30/04/2015 13:09
Berkeley
Distressed
Natural Oak
TYPE OF FLOOR
THICKNESS
LENGTH X WIDTH
1860mm x 190mm
ENGINEERED WOOD
BERKELEY
PACK SIZE
2.11m2
PLANKS PER PACK
6
TYPE OF FINISH
UV Oiled
GRADE
Extra Rustic
TYPE OF JOINT
Tongue and Groove
BEVELS ON EDGES
All 4 edges
METHOD OF FIXING
UNDERFLOOR HEATING
TOG RATING
1.13
HARDNESS
Hard
TRIM CODE
Medium O
Berkeley Distressed
Natural Oak
38-BON-004
£68.95/m 2
£57.46/m2 EX VAT
Due to the techniques used for
distressing, the amount of dark
filler used varies considerably.
68
30/04/2015 13:09
ENGINEERED WOOD
BERKELEY
Carefully crafted to match
generations of use…
69
30/04/2015 13:09
Berkeley
Distressed
White Oak
ENGINEERED WOOD
Berkeley Distressed
White Oak
38-BWO-005
BERKELEY
£68.95/m 2
£57.46/m2 EX VAT
A legacy of nature …
TYPE OF FLOOR
TYPE OF JOINT
Tongue and Groove
THICKNESS
BEVELS ON EDGES
All 4 edges
LENGTH X WIDTH
1860mm x 190mm
METHOD OF FIXING
UNDERFLOOR HEATING
TOG RATING
1.13
HARDNESS
Hard
TRIM CODE
Medium 6
70
PACK SIZE
2.11m2
PLANKS PER PACK
6
TYPE OF FINISH
UV Oiled
GRADE
Extra Rustic
30/04/2015 13:09
Berkeley
Distressed
Montana Oak
ENGINEERED WOOD
Berkeley Distressed
Montana Oak
38-BOM-001
Ambient, cosy and sheltered from the elements…
TYPE OF FLOOR
TYPE OF JOINT
Tongue and Groove
THICKNESS
BEVELS ON EDGES
All 4 edges
LENGTH X WIDTH
1860mm x 190mm
METHOD OF FIXING
UNDERFLOOR HEATING
TOG RATING
1.13
HARDNESS
Hard
TRIM CODE
Medium 19
PACK SIZE
2.11m2
PLANKS PER PACK
6
TYPE OF FINISH
UV Oiled
GRADE
Extra Rustic
BERKELEY
£68.95/m 2
£57.46/m2 EX VAT
71
30/04/2015 13:09
Berkeley
Distressed
Washed Oak
TYPE OF FLOOR
THICKNESS
LENGTH X WIDTH
1860mm x 190mm
ENGINEERED WOOD
BERKELEY
PACK SIZE
2.11m2
PLANKS PER PACK
6
TYPE OF FINISH
UV Oiled
GRADE
Extra Rustic
TYPE OF JOINT
Tongue and Groove
BEVELS ON EDGES
All 4 edges
METHOD OF FIXING
UNDERFLOOR HEATING
TOG RATING
1.13
HARDNESS
Hard
TRIM CODE
Medium 21
Berkeley Distressed
Washed Oak
38-BOW-002
£68.95/m 2
£57.46/m2 EX VAT
72
30/04/2015 13:09
ENGINEERED WOOD
BERKELEY
The natural state of style…
73
30/04/2015 13:10
Berkeley
Distressed
Burnt Oak
ENGINEERED WOOD
Berkeley Distressed
Burnt Oak
38-BOA-006
BERKELEY
£68.95/m 2
£57.46/m2 EX VAT
Caressing textures, in a heritage board…
TYPE OF FLOOR
TYPE OF JOINT
Tongue and Groove
THICKNESS
BEVELS ON EDGES
All 4 edges
LENGTH X WIDTH
1860mm x 190mm
METHOD OF FIXING
UNDERFLOOR HEATING
TOG RATING
1.13
HARDNESS
Hard
TRIM CODE
Medium 13
74
PACK SIZE
2.11m2
PLANKS PER PACK
6
TYPE OF FINISH
UV Oiled
GRADE
Extra Rustic
30/04/2015 13:10
Berkeley
Distressed
Tradition
ENGINEERED WOOD
Berkeley Distressed
Tradition
38-BTR-007
£75.95/m 2
£63.29/m2 EX VAT
TYPE OF FLOOR
TYPE OF JOINT
Tongue and Groove
THICKNESS
BEVELS ON EDGES
All 4 edges
LENGTH X WIDTH
1860mm x 190mm
METHOD OF FIXING
UNDERFLOOR HEATING
TOG RATING
1.13
HARDNESS
Hard
TRIM CODE
Medium 2
PACK SIZE
2.11m2
PLANKS PER PACK
6
TYPE OF FINISH
UV Oiled
GRADE
Extra Rustic
BERKELEY
Traditional wood blocks add rustic charm...
Some boards contain traditional
wood block detailing.
75
30/04/2015 13:10
Berkeley
Distressed
Reclaim
TYPE OF FLOOR
THICKNESS
LENGTH X WIDTH
1860mm x 190mm
ENGINEERED WOOD
BERKELEY
PACK SIZE
2.11m2
PLANKS PER PACK
6
TYPE OF FINISH
UV Oiled
GRADE
Extra Rustic
TYPE OF JOINT
Tongue and Groove
BEVELS ON EDGES
All 4 edges
METHOD OF FIXING
UNDERFLOOR HEATING
TOG RATING
1.13
HARDNESS
Hard
TRIM CODE
Medium 16
Berkeley Distressed
Reclaim
38-BRC-006
£75.95/m 2
£63.29/m2 EX VAT
Some boards contain traditional
wood peg detailing.
76
30/04/2015 13:10
ENGINEERED WOOD
BERKELEY
Warm chocolate tones
and antique details...
77
30/04/2015 13:10
Berkeley
Distressed
Smoked Oak
ENGINEERED WOOD
Berkeley Distressed
Smoked Oak
38-BOS-003
BERKELEY
£68.95/m 2
Weathered boards that have stood
the test of time…
£57.46/m2 EX VAT
TYPE OF FLOOR
TYPE OF JOINT
Tongue and Groove
THICKNESS
BEVELS ON EDGES
All 4 edges
LENGTH X WIDTH
1860mm x 190mm
METHOD OF FIXING
UNDERFLOOR HEATING
TOG RATING
1.13
HARDNESS
Hard
TRIM CODE
Medium 2
78
PACK SIZE
2.11m2
PLANKS PER PACK
6
TYPE OF FINISH
UV Oiled
GRADE
Extra Rustic
30/04/2015 13:10
4MM WEAR LAYER
5 COATS OF UV LACQUER
ENGINEERED PLYWOOD CORE
TONGUE & GROOVE JOINT
GOODRICH
Parquetry’s origins begin with the medieval practice of raising
seated noblemen over basic stone floors using decorative wooden
planking. Goodrich parquet floor patterns continue this tradition
and transport you to a different era.
•
•
•
•
ENGINEERED WOOD
STATELY, ENDURING AND ADAPTABLE
Available as traditional planks and modern square blocks
Pre-finished boards for convenient and quick installation
Brushed surface to replicate natural properties of wood
Compatible with underfloor heating when stuck-down
GOODRICH
BRUSHED AND LACQUERED FINISH
Page 80
Page 81
Page 82
Page 83
Page 84
Page 86
15mm
79
30/04/2015 13:10
Goodrich
Herringbone
Natural Oak
ENGINEERED WOOD
GOODRICH
Goodrich Herringbone
Natural Oak
Traditional artistry, discovered in great halls
and manors…
32-GNA-001
£69.95/m 2
£58.29/m2 EX VAT
80
TYPE OF FLOOR
TYPE OF JOINT
Tongue and Groove
THICKNESS
BEVELS ON EDGES
All 4 edges
LENGTH X WIDTH
400mm x 90mm
METHOD OF FIXING
PACK SIZE
1.3m2
UNDERFLOOR HEATING
PLANKS PER PACK
36
TOG RATING
1.13
TYPE OF FINISH
HARDNESS
Hard
GRADE
Rustic
TRIM CODE
Medium O
30/04/2015 13:10
Goodrich
Herringbone
Coffee Oak
ENGINEERED WOOD
Reflecting the rich aroma of
freshly ground beans…
GOODRICH
Coffee Oak
32-GCO-001
£69.95/m 2
£58.29/m2 EX VAT
TYPE OF FLOOR
TYPE OF JOINT
Tongue and Groove
THICKNESS
BEVELS ON EDGES
All 4 edges
LENGTH X WIDTH
400mm x 90mm
METHOD OF FIXING
PACK SIZE
1.3m2
UNDERFLOOR HEATING
PLANKS PER PACK
36
TOG RATING
1.13
TYPE OF FINISH
HARDNESS
Hard
GRADE
Rustic
TRIM CODE
Medium 4
81
30/04/2015 13:10
Goodrich
Herringbone
Whitened
ENGINEERED WOOD
GOODRICH
Whitened
Hale and hearty planks, set to the
sounds of the sea…
32-GWH-001
£69.95/m 2
£58.29/m2 EX VAT
82
TYPE OF FLOOR
TYPE OF JOINT
Tongue and Groove
THICKNESS
BEVELS ON EDGES
All 4 edges
LENGTH X WIDTH
400mm x 90mm
METHOD OF FIXING
PACK SIZE
1.3m2
UNDERFLOOR HEATING
PLANKS PER PACK
36
TOG RATING
1.13
TYPE OF FINISH
HARDNESS
Hard
GRADE
Rustic
TRIM CODE
Medium 6
30/04/2015 13:10
Goodrich
Smoked
ENGINEERED WOOD
Goodrich
Smoked Planks
32-GSM-001
£89.95/m 2
£74.96/m2 EX VAT
Traditional herringbone reinvented...
GOODRICH
Goodrich
Smoked Squares
32-GSM-002
£89.95/m 2
£74.96/m2 EX VAT
TYPE OF FLOOR
TYPE OF JOINT
Tongue and Groove
THICKNESS
BEVELS ON EDGES
All 4 edges
METHOD OF FIXING
UNDERFLOOR HEATING
TOG RATING
1.13
LENGTH X WIDTH
PACK SIZE
560mm x 280mm (Planks)
280mm x 280mm (Squares)
1.568m (Planks)
0.784m2 (Squares)
2
PLANKS PER PACK
10
HARDNESS
Hard
TYPE OF FINISH
TRIM CODE
Medium 2
GRADE
Rustic
83
30/04/2015 13:10
Goodrich
Harcourt
TYPE OF FLOOR
THICKNESS
LENGTH X WIDTH
PACK SIZE
1.568m2 (Planks)
0.784m2 (Squares)
ENGINEERED WOOD
GOODRICH
PLANKS PER PACK
10
TYPE OF FINISH
GRADE
Rustic
TYPE OF JOINT
Tongue and Groove
BEVELS ON EDGES
All 4 edges
METHOD OF FIXING
UNDERFLOOR HEATING
TOG RATING
1.13
HARDNESS
Hard
TRIM CODE
Medium 6
Goodrich Harcourt
Planks
32-HAR-001
£89.95/m 2
£74.96/m2 EX VAT
Goodrich Harcourt
Squares
32-HAR-002
£89.95/m 2
£74.96/m2 EX VAT
84
30/04/2015 13:10
Create this design with 80% Goodrich Harcourt Planks and 20% Goodrich
Milton Squares. See p. 86 for Goodrich Milton.
ENGINEERED WOOD
GOODRICH
Elegant white hues with ashen details...
85
30/04/2015 13:10
Goodrich
Milton
ENGINEERED WOOD
Goodrich Milton
Planks
32-MIL-001
£89.95/m 2
£74.96/m2 EX VAT
GOODRICH
Goodrich Milton
Squares
32-MIL-002
Striking black boards with unique
design possibilities...
£89.95/m 2
£74.96/m2 EX VAT
TYPE OF FLOOR
TYPE OF JOINT
Tongue and Groove
THICKNESS
BEVELS ON EDGES
All 4 edges
METHOD OF FIXING
UNDERFLOOR HEATING
TOG RATING
1.13
LENGTH X WIDTH
PACK SIZE
1.568m (Planks)
0.784m2 (Squares)
2
PLANKS PER PACK
10
HARDNESS
Hard
TYPE OF FINISH
TRIM CODE
Medium 12
GRADE
Rustic
Image features Goodrich Harcourt Squares. See p.84.
86
30/04/2015 13:10
4MM WEAR LAYER
GLUELESS LOC JOINT
ENGINEERED SOFTWOOD CORE
WINDSOR
Windsor is the oldest and largest occupied castle in the world,
home to royals and meeting place of the most senior order of British
chivalry. Windsor flooring exemplifies the heraldry and continuing
functional pedigree of this truly national treasure.
•
•
•
•
ENGINEERED WOOD
CONFIDENT, FUNCTIONAL AND RESPLENDANT
Glueless ‘Loc’ system for a seamless installation
Resiliently finished with 6 coats of UV lacquer or oil
Superior appearance with notable lengths of 2200mm
Suitable for both domestic and commercial environments
WINDSOR
GLUELESS LOC SYSTEM
Page 88
Page 89
Page 90
FLOAT OVER AN UNDERLAY
Page 92
Page 93
Page 94
Page 95
Page 96
87
30/04/2015 13:10
Windsor Oak
Rustic 3-Strip
ENGINEERED WOOD
WNDSOR
Windsor Oak
Lacquered 3-Strip
Renowned for its superior appearance
and high specification...
46-WOU-003
£41.95/m 2
£34.96/m2 EX VAT
88
TYPE OF FLOOR
TYPE OF JOINT
Glueless Loc
THICKNESS
BEVELS ON EDGES
None
LENGTH X WIDTH
2190mm x 182mm
METHOD OF FIXING
Floated
PACK SIZE
3.587m2
UNDERFLOOR HEATING
Suitable
PLANKS PER PACK
9
TOG RATING
1.13
TYPE OF FINISH
UV Lacquered
HARDNESS
Hard
GRADE
Rustic
TRIM CODE
Medium O
30/04/2015 13:10
Windsor Oak
Bevelled Plank
ENGINEERED WOOD
WINDSOR
Windsor Oak Oiled
(Bevelled)
46-WOB-001
Modern, cool and clean...
£78.95/m 2
£65.79/m2 EX VAT
TYPE OF FLOOR
TYPE OF JOINT
Glueless Loc
THICKNESS
BEVELS ON EDGES
2 long edges
LENGTH X WIDTH
2200mm x 182mm
METHOD OF FIXING
Floated
UNDERFLOOR HEATING
Suitable
TOG RATING
1.13
HARDNESS
Hard
TRIM CODE
Medium O
PACK SIZE
3.203m2
PLANKS PER PACK
8
TYPE OF FINISH
UV Oiled
GRADE
Rustic
89
30/04/2015 13:10
Windsor Oak
Rustic Plank
TYPE OF FLOOR
THICKNESS
LENGTH X WIDTH
2200mm x 182mm
ENGINEERED WOOD
WNDSOR
PACK SIZE
3.203m2
PLANKS PER PACK
8
TYPE OF FINISH
GRADE
Rustic
TYPE OF JOINT
Glueless Loc
BEVELS ON EDGES
None
METHOD OF FIXING
Floated
UNDERFLOOR HEATING
Suitable
TOG RATING
1.13
HARDNESS
Hard
TRIM CODE
Medium O
Windsor Oak Lacquered
46-WOL-001
£72.95/m 2
£60.79/m2 EX VAT
Windsor Oak Oiled
46-WOO-001
£72.95/m 2
£60.79/m2 EX VAT
90
30/04/2015 13:10
ENGINEERED WOOD
WINDSOR
A premium quality floor...
91
30/04/2015 13:11
Windsor Washed
Oak Plank*
ENGINEERED WOOD
WNDSOR
Windsor Washed Oak
Brushed & Matt Lacquered
46-AOW-001
Cocoa hues iced with ashen grains...
£79.95/m 2
£66.63/m
2
EX VAT
TYPE OF FLOOR
TYPE OF JOINT
Glueless Loc
THICKNESS
BEVELS ON EDGES
None
LENGTH X WIDTH
2200mm x 182mm
METHOD OF FIXING
Floated
UNDERFLOOR HEATING
Suitable
TOG RATING
1.13
HARDNESS
Hard
TRIM CODE
Medium 24
PACK SIZE
3.203m2
PLANKS PER PACK
8
TYPE OF FINISH
GRADE
Rustic
*Previously Arundel Washed Oak
92
30/04/2015 13:11
Windsor Dark
Oiled Plank
ENGINEERED WOOD
WINDSOR
A warm blend of the traditional
and the contemporary...
Windsor Oak Dark Oiled
46-WDO-001
£78.95/m 2
£65.79/m2 EX VAT
TYPE OF FLOOR
TYPE OF JOINT
Glueless Loc
THICKNESS
BEVELS ON EDGES
None
LENGTH X WIDTH
2200mm x 182mm
METHOD OF FIXING
Floated
UNDERFLOOR HEATING
Suitable
TOG RATING
1.13
HARDNESS
Hard
TRIM CODE
Medium 14
PACK SIZE
3.203m2
PLANKS PER PACK
8
TYPE OF FINISH
UV Oiled
GRADE
Rustic
93
30/04/2015 13:11
Windsor White
Oiled Plank
ENGINEERED WOOD
WNDSOR
Whitened for sophistication
and a contemporary feel...
Windsor Oak White Oiled
46-WWO-001
£78.95/m 2
£65.79/m2 EX VAT
TYPE OF FLOOR
TYPE OF JOINT
Glueless Loc
THICKNESS
BEVELS ON EDGES
None
LENGTH X WIDTH
2200mm x 182mm
METHOD OF FIXING
Floated
UNDERFLOOR HEATING
Suitable
TOG RATING
1.13
HARDNESS
Hard
TRIM CODE
Medium 21
94
PACK SIZE
3.203m2
PLANKS PER PACK
8
TYPE OF FINISH
UV Oiled
GRADE
Rustic
30/04/2015 13:11
Windsor Merbau
3-Strip
ENGINEERED WOOD
WINDSOR
Warm, hard-wearing and practical
for any situation...
Windsor Merbau
Lacquered 3-Strip
46-WME-003
£62.95/m 2
£52.46/m2 EX VAT
TYPE OF FLOOR
TYPE OF JOINT
Glueless Loc
THICKNESS
BEVELS ON EDGES
None
LENGTH X WIDTH
2200mm x 182mm
METHOD OF FIXING
Floated
UNDERFLOOR HEATING
Suitable
TOG RATING
1.13
HARDNESS
Very Hard
TRIM CODE
Medium 17
PACK SIZE
3.203m2
PLANKS PER PACK
8
TYPE OF FINISH
UV Lacquered
GRADE
Rustic
95
30/04/2015 13:11
Windsor Maple
3-Strip
ENGINEERED WOOD
WNDSOR
Windsor Maple
Lacquered 3-Strip
Continental history fused with
contemporary vision…
46-WMC-003
£61.95/m 2
£51.63/m2 EX VAT
TYPE OF FLOOR
TYPE OF JOINT
Glueless Loc
THICKNESS
BEVELS ON EDGES
None
LENGTH X WIDTH
2200mm x 182mm
METHOD OF FIXING
Floated
UNDERFLOOR HEATING
Not Advised
TOG RATING
1.15
HARDNESS
Hard
TRIM CODE
Medium M
96
PACK SIZE
3.203m2
PLANKS PER PACK
8
TYPE OF FINISH
UV Lacquered
GRADE
Rustic
30/04/2015 13:11
6MM WEAR LAYER
5 COATS OF HARDWAX OIL
PLYWOOD CORE
CHEPSTOW
Chepstow, the oldest surviving medieval fortification in Britain has
wooden doors on site that are over 800 years old. Our range of
planks are aged to mirror that antiquity, yet they are just as durable
and will be for generations to come.
•
•
•
•
ENGINEERED WOOD
RUGGED, ORIGINAL AND BEAUTIFUL
Superior 21mm board with a generous 6mm wear layer
Available in distinct finishes including Planed and Sawn
Aged to mimic the historical provenance of timber floors
Supremely individual and distinguished in appearance
CHEPSTOW
Page 98
Page 100
Page 101
Page 102
BEVELLED EDGES
Page 104
Page 106
Page 107
Page 108
Page 109
Page 110
Page 111
Page 112
Page 113
21mm
97
30/04/2015 13:11
Chepstow Rustic
Oak Plank*
TYPE OF FLOOR
THICKNESS
LENGTH X WIDTH
1860mm x 189mm
PACK SIZE
2.11m2
PLANKS PER PACK
6
TYPE OF FINISH
UV Matt Lacquered / Brushed
& UV Oiled / Unfinished
ENGINEERED WOOD
GRADE
Rustic
TYPE OF JOINT
Tongue and Groove
BEVELS ON EDGES
All 4 edges
METHOD OF FIXING
UNDERFLOOR HEATING
TOG RATING
1.2
HARDNESS
Hard
TRIM CODE
High O
CHEPSTOW
*Previously Harlech Magnum Oak Plank
Chepstow Oak
Lacquered
65-HML-001
£70.95/m 2
£59.13/m2 EX VAT
Chepstow Oak
Brushed & Oiled
65-HBO-001
£71.95/m 2
£59.96/m2 EX VAT
Chepstow Oak
Unfinished
65-HMU-001
£64.95/m 2
£54.13/m2 EX VAT
98
30/04/2015 13:11
ENGINEERED WOOD
CHEPSTOW
Flawless style merging with
timeless elegance…
99
30/04/2015 13:11
Chepstow
Rustic Oak Plank
(Wide)*
ENGINEERED WOOD
CHEPSTOW
Chepstow Rustic Oak
Brushed & Oiled (Wide)
Wide, harmonious boards,
presented in relaxed tones…
65-HBO-002
£83.95/m 2
£69.96/m2 EX VAT
TYPE OF FLOOR
TYPE OF JOINT
Tongue and Groove
THICKNESS
BEVELS ON EDGES
All 4 edges
LENGTH X WIDTH
2200mm x 240mm
METHOD OF FIXING
UNDERFLOOR HEATING
TOG RATING
1.2
HARDNESS
Hard
TRIM CODE
High O
PACK SIZE
2.11m2
PLANKS PER PACK
4
TYPE OF FINISH
Brushed & UV Oiled
GRADE
Rustic
*Previously Harlech Magnum Oak Plank (Wide)
100
30/04/2015 13:11
Chepstow Planed
Grey Oak
ENGINEERED WOOD
65-POG-001
Hints of ageless flair…
£76.95/m 2
£64.13/m2 EX VAT
TYPE OF FLOOR
TYPE OF JOINT
Tongue and Groove
THICKNESS
BEVELS ON EDGES
All 4 edges
LENGTH X WIDTH
1860mm x 189mm
METHOD OF FIXING
UNDERFLOOR HEATING
TOG RATING
1.2
HARDNESS
Hard
TRIM CODE
High 19
PACK SIZE
2.11m2
PLANKS PER PACK
6
TYPE OF FINISH
UV Hardwax Oil
GRADE
Rustic
CHEPSTOW
Chepstow Planed
Grey Oak
101
30/04/2015 13:11
Chepstow Planed
Whitened Oak
TYPE OF FLOOR
THICKNESS
LENGTH X WIDTH
1860mm x 189mm
ENGINEERED WOOD
CHEPSTOW
PACK SIZE
2.11m2
PLANKS PER PACK
6
TYPE OF FINISH
UV Hardwax Oil
GRADE
Rustic
TYPE OF JOINT
Tongue and Groove
BEVELS ON EDGES
All 4 edges
METHOD OF FIXING
UNDERFLOOR HEATING
TOG RATING
1.2
HARDNESS
Hard
TRIM CODE
High 21
Chepstow Planed
Whitened Oak
65-POW-001
£76.95/m 2
£64.13/m2 EX VAT
102
30/04/2015 13:11
ENGINEERED WOOD
CHEPSTOW
Light white staining adds
a contemporary finish...
103
30/04/2015 13:11
Chepstow Planed
Antique Oak
TYPE OF FLOOR
THICKNESS
LENGTH X WIDTH
1860mm x 189mm
ENGINEERED WOOD
CHEPSTOW
PACK SIZE
2.11m2
PLANKS PER PACK
6
TYPE OF FINISH
UV Hardwax Oil
GRADE
Rustic
TYPE OF JOINT
Tongue and Groove
BEVELS ON EDGES
All 4 edges
METHOD OF FIXING
UNDERFLOOR HEATING
TOG RATING
1.2
HARDNESS
Hard
TRIM CODE
High 8
Chepstow Planed
Antique Oak
65-POA-001
£76.95/m 2
£64.13/m2 EX VAT
104
30/04/2015 13:11
ENGINEERED WOOD
CHEPSTOW
The dark stain highlights the beauty
of the grain pattern...
105
30/04/2015 13:11
Chepstow Planed
Natural Oak
ENGINEERED WOOD
CHEPSTOW
Chepstow Planed
Natural Oak
65-PON-001
Sumptuous quality in a premium floor…
£76.95/m 2
£64.13/m
2
EX VAT
TYPE OF FLOOR
TYPE OF JOINT
Tongue and Groove
THICKNESS
BEVELS ON EDGES
All 4 edges
LENGTH X WIDTH
1860mm x 189mm
METHOD OF FIXING
UNDERFLOOR HEATING
TOG RATING
1.2
HARDNESS
Hard
TRIM CODE
High O
106
PACK SIZE
2.11m2
PLANKS PER PACK
6
TYPE OF FINISH
UV Hardwax Oil
GRADE
Rustic
30/04/2015 13:11
Chepstow Sawn
Natural Oak
ENGINEERED WOOD
Chepstow Sawn
Natural Oak
65-SON-001
£99.95/m 2
Due to the techniques used
for distressing there can be
some roughness on the surface
of the floor
Heritage fresh from the saw…
TYPE OF FLOOR
TYPE OF JOINT
Tongue and Groove
THICKNESS
BEVELS ON EDGES
All 4 edges
LENGTH X WIDTH
1860mm x 189mm
METHOD OF FIXING
UNDERFLOOR HEATING
TOG RATING
1.2
HARDNESS
Hard
TRIM CODE
High O
PACK SIZE
2.11m2
PLANKS PER PACK
6
TYPE OF FINISH
UV Hardwax Oil
GRADE
Rustic
CHEPSTOW
£83.29/m2 EX VAT
107
30/04/2015 13:11
Chepstow Sawn
Grey Oak
ENGINEERED WOOD
Chepstow Sawn
Grey Oak
65-SOG-001
CHEPSTOW
£99.95/m 2
£83.29/m2 EX VAT
of the floor.
A pioneering timber, cut in classic style
TYPE OF FLOOR
TYPE OF JOINT
Tongue and Groove
THICKNESS
BEVELS ON EDGES
All 4 edges
LENGTH X WIDTH
1860mm x 189mm
METHOD OF FIXING
UNDERFLOOR HEATING
TOG RATING
1.2
HARDNESS
Hard
TRIM CODE
High 6
108
PACK SIZE
2.11m2
PLANKS PER PACK
6
TYPE OF FINISH
UV Hardwax Oil
GRADE
Rustic
30/04/2015 13:11
Chepstow Sawn
Bronzed Oak
ENGINEERED WOOD
Chepstow Sawn
Bronzed Oak
65-SOB-001
£99.95/m 2
In tune with the earth and tracked in nature…
TYPE OF FLOOR
TYPE OF JOINT
Tongue and Groove
THICKNESS
BEVELS ON EDGES
All 4 edges
LENGTH X WIDTH
1860mm x 189mm
METHOD OF FIXING
UNDERFLOOR HEATING
TOG RATING
1.2
HARDNESS
Hard
TRIM CODE
High 13
PACK SIZE
2.11m2
PLANKS PER PACK
6
TYPE OF FINISH
UV Hardwax Oil
GRADE
Rustic
CHEPSTOW
£83.29/m2 EX VAT
of the floor.
109
30/04/2015 13:11
Chepstow
Distressed
Charcoal Oak
ENGINEERED WOOD
Chepstow Distressed
Charcoal Oak
65-AOC-001
CHEPSTOW
£102.95/m 2
These floors are smoked to age the timber.
Stains and waxes are then lovingly applied by hand...
£85.79/m2 EX VAT
of the floor.
TYPE OF FLOOR
TYPE OF JOINT
Tongue and Groove
THICKNESS
BEVELS ON EDGES
All 4 edges
LENGTH X WIDTH
1900mm x 190mm
METHOD OF FIXING
UNDERFLOOR HEATING
TOG RATING
1.2
HARDNESS
Hard
TRIM CODE
High 16
110
PACK SIZE
1.444m2
PLANKS PER PACK
4
TYPE OF FINISH
UV Hardwax Oil
GRADE
Rustic
30/04/2015 13:11
Chepstow
Distressed White
Smoked Oak
ENGINEERED WOOD
Chepstow Distressed
White Smoked Oak
65-AWS-001
TYPE OF FLOOR
TYPE OF JOINT
Tongue and Groove
THICKNESS
BEVELS ON EDGES
All 4 edges
LENGTH X WIDTH
1900mm x 190mm
METHOD OF FIXING
UNDERFLOOR HEATING
TOG RATING
1.2
HARDNESS
Hard
TRIM CODE
High 15
PACK SIZE
1.444m2
PLANKS PER PACK
4
TYPE OF FINISH
UV Hardwax Oil
GRADE
Rustic
£85.79/m2 EX VAT
CHEPSTOW
Double smoked to give a light grey stone washed
effect, combined with the ageing...
£102.95/m 2
of the floor.
111
30/04/2015 13:11
Chepstow
Distressed
Natural Oak
ENGINEERED WOOD
Chepstow Distressed
Natural Oak
65-AON-001
CHEPSTOW
£102.95/m 2
Worked edges reflecting the wear of many feet,
big and small…
£85.79/m2 EX VAT
of the floor.
TYPE OF FLOOR
TYPE OF JOINT
Tongue and Groove
THICKNESS
BEVELS ON EDGES
All 4 edges
LENGTH X WIDTH
1900mm x 190mm
METHOD OF FIXING
UNDERFLOOR HEATING
TOG RATING
1.2
HARDNESS
Hard
TRIM CODE
High O
112
PACK SIZE
1.444m2
PLANKS PER PACK
4
TYPE OF FINISH
UV Hardwax Oil
GRADE
Rustic
30/04/2015 13:11
Chepstow
Distressed
Sienna Oak
ENGINEERED WOOD
Chepstow Distressed
Sienna Oak
65-AOS-001
£102.95/m 2
of the floor.
Exuding a lovely blend of honeyed tones...
TYPE OF FLOOR
TYPE OF JOINT
Tongue and Groove
THICKNESS
BEVELS ON EDGES
All 4 edges
LENGTH X WIDTH
1900mm x 190mm
METHOD OF FIXING
UNDERFLOOR HEATING
TOG RATING
1.2
HARDNESS
Hard
TRIM CODE
High 18
PACK SIZE
1.444m2
PLANKS PER PACK
4
TYPE OF FINISH
UV Hardwax Oil
GRADE
Rustic
CHEPSTOW
£85.79/m2 EX VAT
113
30/04/2015 13:11
BAMBOO
PRACTICAL, ECOLOGICAL AND BEAUTIFUL
Bamboo is an amazing material. In the Far East this
unconventional grass is used for everything from bridges and
scaffolding to luxurious bed linen. As a floor covering, bamboo is
available in two varieties, laminated solid strips (Warwick™) or
strand-woven bamboo fibres (Style™).
With a variety of colours, styles and structures available, our
bamboo flooring is designed to complement any interior,
residential or commercial. Each plank is pre-finished with five
coats of UV scratch-resistant lacquer and is available as either a
tongue and groove board or glueless ‘clic’ system.
BAMBOO
Harvested from the Moso bamboo plant, this rapidly regenerating
grass has a natural lifecycle of 5 years, making it one of the most
sustainable materials known to man. When used in a strandwoven structure, each flooring plank has a tensile strength
comparable to steel. It is by far the hardest wearing floor in our
range and as a result, it is perfect for areas with high footfall.
114
RRP_15_Bamboo.indd 114
BAMBOO
30/04/2015 13:19
LAMINATED BAMBOO STRIPS,
VERTICAL OR HORIZONTAL
WARWICK
HARDWEARING, SOPHISTICATED AND CONSERVING
Lancelot ‘Capability’ Brown, or ‘England’s Greatest Gardener’
landscaped the picturesque castle gardens of Warwick. He left
behind a legacy that our Warwick Bamboo floors strive for in their
eco-friendly and carbon neutral manufacture.
•
•
•
•
Constructed from laminated solid bamboo strips
Available in a choice of vertical or horizontal fusions
Choose between natural or carbonised coffee tones
Designed to be stuck-down or secret nailed
BAMBOO
TRIMS AVAILABLE See Page 159
WARWICK
Page 116
ROBUST TONGUE & GROOVE JOINT
Page 118
15mm
BAMBOO
115
30/04/2015 13:19
Warwick Bamboo
Coffee Plank
TYPE OF FLOOR
Engineered Bamboo
THICKNESS
15mm
LENGTH X WIDTH
950mm x 95mm
PACK SIZE
2.166m2
PLANKS PER PACK
24
TYPE OF FINISH
UV Matt Lacquered
TYPE OF JOINT
Tongue and Groove
BEVELS ON EDGES
All 4 edges
METHOD OF FIXING
UNDERFLOOR HEATING
TOG RATING
1.1
HARDNESS
Hard
TRIM CODE
Coffee
BAMBOO
Warwick Bamboo Coffee
(Vertical)
26-CVM-004
£46.95/m 2
£39.13/m2 EX VAT
WARWICK
116
BAMBOO
30/04/2015 13:19
BAMBOO
WARWICK
Environmental origins in a robust board…
BAMBOO
117
30/04/2015 13:19
Warwick Bamboo
Natural Plank
Warwick Bamboo Natural
(Horizontal)
26-NHM-004
BAMBOO
A revitalising and sunny glow…
£46.95/m 2
£39.13/m
2
EX VAT
WARWICK
118
TYPE OF FLOOR
Engineered Bamboo
BEVELS ON EDGES
All 4 edges
THICKNESS
15mm
METHOD OF FIXING
LENGTH X WIDTH
950mm x 95mm
UNDERFLOOR HEATING
PACK SIZE
2.166m2
TOG RATING
1.1
PLANKS PER PACK
24
HARDNESS
Hard
TYPE OF FINISH
UV Matt Lacquered
TRIM CODE
Natural
TYPE OF JOINT
Tongue and Groove
BAMBOO
30/04/2015 13:19
STRAND WOVEN BAMBOO
GLUELESS CLIC SYSTEM
STYLE
SUSTAINABLE, STYLISH AND STRONG
Style is more than just a look. It’s a capable, strong, and sustainable
floor manufactured using strand woven Moso bamboo. Fibrous
strands from the bamboo cane are woven together and compressed
under extreme conditions to form each stylish plank.
•
•
•
•
Moso bamboo has a natural lifecycle of 5 years
Much higher Janka (hardness) rating than timber
Patented glueless ‘Loc’ system for easy installation
Style is a dense, strong and durable floor covering
BAMBOO
GLUELESS CLIC SYSTEM
STYLE
Page 120
Page 121
Page 122
Page 123
12mm
BAMBOO
119
30/04/2015 13:19
Style Bamboo
Natural Plank
Calm and cool, like a pagoda set on a
mountain trail…
Style Bamboo Natural
20-SWN-001
BAMBOO
£58.95/m 2
£49.13/m2 EX VAT
STYLE
120
TYPE OF FLOOR
Strand Woven Bamboo
BEVELS ON EDGES
All 4 edges
THICKNESS
12mm
METHOD OF FIXING
Floated
LENGTH X WIDTH
1850mm x 138mm
UNDERFLOOR HEATING
Suitable
PACK SIZE
1.532m2
TOG RATING
1.1
PLANKS PER PACK
6
HARDNESS
Very Hard
TYPE OF FINISH
UV Matt Lacquered
TRIM CODE
Natural
TYPE OF JOINT
Glueless Clic
BAMBOO
30/04/2015 13:19
Style Bamboo
Coffee Plank
The strongest, most environmentally
friendly floor you’ll ever find!
Style Bamboo Coffee
20-SWC-001
BAMBOO
£58.95/m 2
£49.13/m2 EX VAT
Strand Woven Bamboo
BEVELS ON EDGES
All 4 edges
THICKNESS
12mm
METHOD OF FIXING
Floated
LENGTH X WIDTH
1850mm x 138mm
UNDERFLOOR HEATING
Suitable
PACK SIZE
1.532m2
TOG RATING
1.1
PLANKS PER PACK
6
HARDNESS
Very Hard
TYPE OF FINISH
UV Matt Lacquered
TRIM CODE
Coffee
TYPE OF JOINT
Glueless Clic
BAMBOO
STYLE
TYPE OF FLOOR
121
30/04/2015 13:19
Style Bamboo
Saddle Plank
A rich floor, sourced from regenerating
bamboo grass…
Style Bamboo Saddle
20-SSA-001
BAMBOO
£62.95/m 2
£52.46/m2 EX VAT
STYLE
122
TYPE OF FLOOR
Strand Woven Bamboo
BEVELS ON EDGES
All 4 edges
THICKNESS
12mm
METHOD OF FIXING
Floated
LENGTH X WIDTH
1850mm x 138mm
UNDERFLOOR HEATING
Suitable
PACK SIZE
1.532m2
TOG RATING
1.1
PLANKS PER PACK
6
HARDNESS
Very Hard
TYPE OF FINISH
UV Lacquered
TRIM CODE
Saddle
TYPE OF JOINT
Glueless Clic
BAMBOO
30/04/2015 13:19
Style Bamboo
Whitewash Plank
Style Bamboo Whitewash
20-SWH-001
£62.95/m 2
BAMBOO
Explore the peaceful Zen of this refined floor…
£52.46/m2 EX VAT
Strand Woven Bamboo
BEVELS ON EDGES
All 4 edges
THICKNESS
12mm
METHOD OF FIXING
Floated
LENGTH X WIDTH
1850mm x 138mm
UNDERFLOOR HEATING
Suitable
PACK SIZE
1.532m2
TOG RATING
1.1
PLANKS PER PACK
6
HARDNESS
Very Hard
TYPE OF FINISH
UV Lacquered
TRIM CODE
Whitened
TYPE OF JOINT
Glueless Clic
BAMBOO
STYLE
TYPE OF FLOOR
123
30/04/2015 13:19
LAMINATE
DESIGNED FOR LIVING
Laminate flooring is the perfect solution for anyone wanting a real
wood floor without the premium price tag. Olsen® is an affordable
yet authentic alternative and is available in a wide variety of colours.
From clean and contemporary white-washed boards to rustic and
rural inspired designs: there’s something to suit every preference and
any room.
Olsen is AC4-rated for heavy domestic or light commercial use. Its
protective scratch-resistant coating allows for routine maintenance
to be performed with ease. Together with a 25-year warranty, we are
confident you will enjoy an Olsen floor for many years to come.
Olsen floors use quality materials and advanced manufacturing
methods to ensure the integrity of the product throughout its
lifespan. The supporting core is constructed from premium High
Density Fibreboard (HDF) for notable stability and resilience.
Installation is fast, efficient, robust and accessible thanks to a
patented ‘Clic’ joint that allows for a glueless installation.
LAMINATE
124
RRP_15_Laminate_124-151.indd 124
OLSEN
30/04/2015 13:20
HIGH WEAR MELAMINE COATING
PRINTED WOOD FOIL
HDF CORE
BALANCING MATERIAL
GLUELESS CLIC JOINT
OLSEN
PRACTICAL, INSPIRING AND AFFORDABLE
Olsen is pure practicality. Its designs and textures are true to life
and are incredibly realistic – both in look and in price. Our laminate
floors offer exceptional value, with enough variety to suit any room,
décor or purpose.
Page 130
Page 131
Page 132
OLSEN
Page 128
Subtle textured finishes capture the essence of natural timber
Colour matched joints add authentic yet subtle definition
Patented glueless ‘Clic’ system for quick and easy fitting
Suitable for domestic and light commercial use (AC4 rated)
FLOOR CARE See Page 166
Page 126
•
•
•
•
Page 134
Page 136
Page 137
Page 138
Page 140
Page 142
Page 143
Page 144
Page 146
Page 147
Page 148
Page 149
Page 150
LAMINATE
8mm
OLSEN
125
30/04/2015 13:21
Olsen Linen Oak
TYPE OF FLOOR
Laminate
THICKNESS
8mm
LENGTH X WIDTH
1292mm x 192mm
PACK SIZE
1.98m2
PLANKS PER PACK
8
TYPE OF FINISH
Embossed Grain
TYPE OF JOINT
Glueless Clic
BEVELS ON EDGES
None
METHOD OF FIXING
Floated
UNDERFLOOR HEATING
Suitable
TOG RATING
0.7
HARDNESS
Hard
TRIM CODE
238
Olsen Linen Oak
28-OS1-238
OLSEN
£21.95/m 2
£18.29/m2 EX VAT
LAMINATE
126
OLSEN
30/04/2015 13:21
OLSEN
LAMINATE
Cool, light and airy tones that
create a wonderful sense of space...
OLSEN
127
30/04/2015 13:21
Olsen Aspen Oak
TYPE OF FLOOR
Laminate
THICKNESS
8mm
LENGTH X WIDTH
1292mm x 192mm
PACK SIZE
1.98m2
PLANKS PER PACK
8
TYPE OF FINISH
Embossed Grain
TYPE OF JOINT
Glueless Clic
BEVELS ON EDGES
None
METHOD OF FIXING
Floated
UNDERFLOOR HEATING
Suitable
TOG RATING
0.7
HARDNESS
Hard
TRIM CODE
239
Olsen Aspen Oak
28-OS1-239
OLSEN
£21.95/m 2
£18.29/m2 EX VAT
LAMINATE
128
OLSEN
30/04/2015 13:21
OLSEN
LAMINATE
Subtle ashen shades exude
contemporary appeal...
OLSEN
129
30/04/2015 13:21
Olsen Coastal
Oak
Olsen Coastal Oak
28-OS1-241
Envision the smell of salt in the air…
£21.95/m 2
£18.29/m2 EX VAT
OLSEN
LAMINATE
130
TYPE OF FLOOR
Laminate
BEVELS ON EDGES
All 4 edges
THICKNESS
8mm
METHOD OF FIXING
Floated
LENGTH X WIDTH
1292mm x 192mm
UNDERFLOOR HEATING
Suitable
PACK SIZE
1.98m2
TOG RATING
0.7
PLANKS PER PACK
8
HARDNESS
Hard
TYPE OF FINISH
Embossed Grain
TRIM CODE
241
TYPE OF JOINT
Glueless Clic
OLSEN
30/04/2015 13:21
Olsen Washed
Oak
Olsen Washed Oak
High, swirling stripes simulating an aged timber…
28-OS1-242
£21.95/m 2
£18.29/m2 EX VAT
BEVELS ON EDGES
2 long edges
THICKNESS
8mm
METHOD OF FIXING
Floated
LENGTH X WIDTH
1292mm x 192mm
UNDERFLOOR HEATING
Suitable
PACK SIZE
1.98m2
TOG RATING
0.7
PLANKS PER PACK
8
HARDNESS
Hard
TYPE OF FINISH
Embossed Grain
TRIM CODE
242
TYPE OF JOINT
Glueless Clic
LAMINATE
Laminate
OLSEN
TYPE OF FLOOR
OLSEN
131
30/04/2015 13:21
Olsen Driftwood
TYPE OF FLOOR
Laminate
THICKNESS
8mm
LENGTH X WIDTH
1292mm x 192mm
PACK SIZE
1.98m2
PLANKS PER PACK
8
TYPE OF FINISH
Embossed Grain
TYPE OF JOINT
Glueless Clic
BEVELS ON EDGES
None
METHOD OF FIXING
Floated
UNDERFLOOR HEATING
Suitable
TOG RATING
0.7
HARDNESS
Hard
TRIM CODE
259
Olsen Driftwood
28-OS1-259
OLSEN
£21.95/m 2
£18.29/m2 EX VAT
LAMINATE
132
OLSEN
30/04/2015 13:21
OLSEN
LAMINATE
An infusion of dusty mocha
and cool grey...
OLSEN
133
30/04/2015 13:21
Olsen Nordic Oak
TYPE OF FLOOR
Laminate
THICKNESS
8mm
LENGTH X WIDTH
1292mm x 192mm
PACK SIZE
1.98m2
PLANKS PER PACK
8
TYPE OF FINISH
Embossed Grain
TYPE OF JOINT
Glueless Clic
BEVELS ON EDGES
None
METHOD OF FIXING
Floated
UNDERFLOOR HEATING
Suitable
TOG RATING
0.7
HARDNESS
Hard
TRIM CODE
261
Olsen Nordic Oak
28-OS1-261
OLSEN
£21.95/m 2
£18.29/m2 EX VAT
LAMINATE
134
OLSEN
30/04/2015 13:21
OLSEN
LAMINATE
Warm waves from the fire;
the buzz of the city...
OLSEN
135
30/04/2015 13:21
Olsen Vintage
Mink
Olsen Vintage Mink
28-OS1-257
A striking and sophisticated blend....
£21.95/m 2
£18.29/m
2
EX VAT
OLSEN
LAMINATE
136
TYPE OF FLOOR
Laminate
BEVELS ON EDGES
All 4 edges
THICKNESS
8mm
METHOD OF FIXING
Floated
LENGTH X WIDTH
1292mm x 192mm
UNDERFLOOR HEATING
Suitable
PACK SIZE
1.98m2
TOG RATING
0.7
PLANKS PER PACK
8
HARDNESS
Hard
TYPE OF FINISH
Embossed Grain
TRIM CODE
257
TYPE OF JOINT
Glueless Clic
OLSEN
30/04/2015 13:21
Olsen Summer
Oak
Olsen Summer Oak
Sunshine, picnics and the lazy droning of bees…
28-OS1-245
£21.95/m 2
£18.29/m2 EX VAT
BEVELS ON EDGES
All 4 edges
THICKNESS
8mm
METHOD OF FIXING
Floated
LENGTH X WIDTH
1292mm x 192mm
UNDERFLOOR HEATING
Suitable
PACK SIZE
1.98m2
TOG RATING
0.7
PLANKS PER PACK
8
HARDNESS
Hard
TYPE OF FINISH
Embossed Grain
TRIM CODE
245
TYPE OF JOINT
Glueless Clic
LAMINATE
Laminate
OLSEN
TYPE OF FLOOR
OLSEN
137
30/04/2015 13:22
Olsen Natural
Oak
TYPE OF FLOOR
Laminate
THICKNESS
8mm
LENGTH X WIDTH
1292mm x 192mm
PACK SIZE
1.98m2
PLANKS PER PACK
8
TYPE OF FINISH
Embossed Grain
TYPE OF JOINT
Glueless Clic
BEVELS ON EDGES
All 4 edges
METHOD OF FIXING
Floated
UNDERFLOOR HEATING
Suitable
TOG RATING
0.7
HARDNESS
Hard
TRIM CODE
244
Olsen Natural Oak
28-OS1-244
OLSEN
£21.95/m 2
£18.29/m2 EX VAT
LAMINATE
138
OLSEN
30/04/2015 13:22
OLSEN
LAMINATE
Beauty at just the right price…
OLSEN
139
30/04/2015 13:22
Olsen Prairie Oak
TYPE OF FLOOR
Laminate
THICKNESS
8mm
LENGTH X WIDTH
1292mm x 192mm
PACK SIZE
1.98m2
PLANKS PER PACK
8
TYPE OF FINISH
Embossed Grain
TYPE OF JOINT
Glueless Clic
BEVELS ON EDGES
All 4 edges
METHOD OF FIXING
Floated
UNDERFLOOR HEATING
Suitable
TOG RATING
0.7
HARDNESS
Hard
TRIM CODE
247
Olsen Prairie Oak
28-OS1-247
OLSEN
£21.95/m 2
£18.29/m2 EX VAT
LAMINATE
140
OLSEN
30/04/2015 13:22
OLSEN
LAMINATE
The frontier experience, influenced
by the Old West…
OLSEN
141
30/04/2015 13:22
Olsen Cotswold
Oak
Transports to picturesque landscapes,
ideal for a quick escape…
Olsen Cotswold Oak
28-OS1-246
£21.95/m 2
£18.29/m2 EX VAT
OLSEN
LAMINATE
142
TYPE OF FLOOR
Laminate
BEVELS ON EDGES
All 4 edges
THICKNESS
8mm
METHOD OF FIXING
Floated
LENGTH X WIDTH
1292mm x 192mm
UNDERFLOOR HEATING
Suitable
PACK SIZE
1.98m2
TOG RATING
0.7
PLANKS PER PACK
8
HARDNESS
Hard
TYPE OF FINISH
Embossed Grain
TRIM CODE
246
TYPE OF JOINT
Glueless Clic
OLSEN
30/04/2015 13:22
Olsen Vintage
Oak
Olsen Vintage Oak
28-OS1-249
An antique, mature legacy…
£21.95/m 2
£18.29/m2 EX VAT
BEVELS ON EDGES
All 4 edges
THICKNESS
8mm
METHOD OF FIXING
Floated
LENGTH X WIDTH
1292mm x 192mm
UNDERFLOOR HEATING
Suitable
PACK SIZE
1.98m2
TOG RATING
0.7
PLANKS PER PACK
8
HARDNESS
Hard
TYPE OF FINISH
Embossed Grain
TRIM CODE
249
TYPE OF JOINT
Glueless Clic
LAMINATE
Laminate
OLSEN
TYPE OF FLOOR
OLSEN
143
30/04/2015 13:22
Olsen Woodland
Oak
TYPE OF FLOOR
Laminate
THICKNESS
8mm
LENGTH X WIDTH
1292mm x 192mm
PACK SIZE
1.98m2
PLANKS PER PACK
8
TYPE OF FINISH
Embossed Grain
TYPE OF JOINT
Glueless Clic
BEVELS ON EDGES
All 4 edges
METHOD OF FIXING
Floated
UNDERFLOOR HEATING
Suitable
TOG RATING
0.7
HARDNESS
Hard
TRIM CODE
258
Olsen Woodland Oak
28-OS1-258
OLSEN
£21.95/m 2
£18.29/m2 EX VAT
LAMINATE
144
OLSEN
30/04/2015 13:22
OLSEN
LAMINATE
Flowing autumnal hues with
authentic rustic character...
OLSEN
145
30/04/2015 13:22
Olsen Warm
Walnut
Olsen Warm Walnut
28-OS1-260
Oozing with rich cocoa colours...
£21.95/m 2
£18.29/m2 EX VAT
OLSEN
LAMINATE
146
TYPE OF FLOOR
Laminate
BEVELS ON EDGES
All 4 edges
THICKNESS
8mm
METHOD OF FIXING
Floated
LENGTH X WIDTH
1292mm x 192mm
UNDERFLOOR HEATING
Suitable
PACK SIZE
1.98m2
TOG RATING
0.7
PLANKS PER PACK
8
HARDNESS
Hard
TYPE OF FINISH
Embossed Grain
TRIM CODE
260
TYPE OF JOINT
Glueless Clic
OLSEN
30/04/2015 13:22
Olsen Oak
Cognac
Olsen Oak Cognac
Deep in character and naturally mature…
28-OS1-251
£21.95/m 2
£18.29/m2 EX VAT
BEVELS ON EDGES
All 4 edges
THICKNESS
8mm
METHOD OF FIXING
Floated
LENGTH X WIDTH
1292mm x 192mm
UNDERFLOOR HEATING
Suitable
PACK SIZE
1.98m2
TOG RATING
0.7
PLANKS PER PACK
8
HARDNESS
Hard
TYPE OF FINISH
Embossed Grain
TRIM CODE
251
TYPE OF JOINT
Glueless Clic
LAMINATE
Laminate
OLSEN
TYPE OF FLOOR
OLSEN
147
30/04/2015 13:22
Olsen Double
Smoked
Vintage inspiration with complementing
earthy tones…
Olsen Double Smoked
28-OS1-252
£21.95/m 2
£18.29/m2 EX VAT
OLSEN
LAMINATE
148
TYPE OF FLOOR
Laminate
BEVELS ON EDGES
All 4 edges
THICKNESS
8mm
METHOD OF FIXING
Floated
LENGTH X WIDTH
1292mm x 192mm
UNDERFLOOR HEATING
Suitable
PACK SIZE
1.98m2
TOG RATING
0.7
PLANKS PER PACK
8
HARDNESS
Hard
TYPE OF FINISH
Embossed Grain
TRIM CODE
252
TYPE OF JOINT
Glueless Clic
OLSEN
30/04/2015 13:22
Olsen Burnt Oak
Olsen Burnt Oak
28-OS1-255
Elemental and smoky grain …
£21.95/m 2
£18.29/m2 EX VAT
BEVELS ON EDGES
All 4 edges
THICKNESS
8mm
METHOD OF FIXING
Floated
LENGTH X WIDTH
1292mm x 192mm
UNDERFLOOR HEATING
Suitable
PACK SIZE
1.98m2
TOG RATING
0.7
PLANKS PER PACK
8
HARDNESS
Hard
TYPE OF FINISH
Embossed Grain
TRIM CODE
255
TYPE OF JOINT
Glueless Clic
LAMINATE
Laminate
OLSEN
TYPE OF FLOOR
OLSEN
149
30/04/2015 13:22
Olsen Midnight
Silver
TYPE OF FLOOR
Laminate
THICKNESS
8mm
LENGTH X WIDTH
1292mm x 192mm
PACK SIZE
1.98m2
PLANKS PER PACK
8
TYPE OF FINISH
Embossed Grain
TYPE OF JOINT
Glueless Clic
BEVELS ON EDGES
All 4 edges
METHOD OF FIXING
Floated
UNDERFLOOR HEATING
Suitable
TOG RATING
0.7
HARDNESS
Hard
TRIM CODE
256
Olsen Midnight Silver
28-OS1-256
OLSEN
£21.95/m 2
£18.29/m2 EX VAT
LAMINATE
150
OLSEN
30/04/2015 13:22
OLSEN
LAMINATE
Luxury and elegance in
contrasting hues…
OLSEN
151
30/04/2015 13:22
PROFILES
OUR RANGE EXPLAINED
Our profiles are designed to provide smooth transitions and a smart finish to your floor. They’re perfect for concealing necessary expansion gaps,
the unsightly edges of stairs, breaks in doorways and bridges between different floor coverings. We offer 7 different types to suit various functions
and complement every floor in our catalogue.
Learn about our range...
TWIN PROFILE
RAMP PROFILE
Sometimes referred to as a
T-bar or Expansion, the Twin
Profile is used to cover the
expansion gap between two
floors of equal height, providing
a neat finish at doorways or
serving as a room divider.
Otherwise known as an Adapter
or Reducer, the Ramp Profile
provides a smooth transition
between two floors of varying
height. It typically bridges larger
transitions such as wood to vinyl
floor coverings.
SEMI-RAMP PROFILE
END PROFILE
The Semi-Ramp profile is used
to create a smooth transition
between two floors of varying
height, typically concealing
minor transitions such as wood
to carpet.
Commonly referred to as an
Edge, Square Edge or End Stop,
the End Profile can be used as
an attractive finish for an inset
mat well. In some cases, it can
also be used when a wooden
floor meets patio doors.
STAIR NOSING PROFILE
SCOTIA PROFILE
The Stair Nosing Profile is used
on steps and stairs to protect
the edges of the flooring from
the excessive wear caused by
foot traffic. The trim conceals
the edge for a complementary,
smart finish.
As it’s not always possible to
remove and refit skirting boards
when fitting a wood floor, the
Scotia Profile can be used around
the edge of the room to hide the
necessary expansion gaps. This
design is curved inwards and
provides a subtle trim.
QUADRANT PROFILE
COLOUR MATCHING
All the wood trims in our range undergo a
stringent selection process to ensure they make
extremely close colour complements for our
floors. However, please be aware that profiles
are subject to natural colour variations and may
not appear to match the flooring exactly.
A Quadrant profile functions like
a Scotia to conceal the expansion
gap between a new floor and
existing skirting. This design is
curved outwards and provides a
more distinct trim than a Scotia.
152
RRP_15_Trims_section.indd 152
PROFILES
30/04/2015 13:25
SOLID WOOD
PROFILES
PROFILO PROFILES
CONTOUR PROFILES
Made from solid oak and carefully pre-finished with several coats
of tough lacquer, these traditional profiles will give your floor a
smart finishing touch. Designed to be stuck to the subfloor, they
create a neat and durable transition or edge.
These premium solid wood trims sit neatly in a black channel
which can be glued or screwed down. Coded to work with each
wood floor in our range, this feature allows you to find the most
appropriate height and colour trim for your floor choice.
Profilo trims are available in a wide range of complementary
colours and with a choice of heights and lengths. They’re great on a
budget, especially when bridging multiple rooms and materials.
Available in a colour to complement every floor in the catalogue
and in a range of heights and lengths, Contour trims provide a
convenient finish for transitions, expansion gaps and edges.
SELECTING A PROFILE
Follow this simple guide to find
a profile that complements your
floor and meets your finishing
requirements.
1. Find your unique trim code
listed within the specification
of your floor choice.
2. Choose the type of profile
you require. E.g. Twin or
Ramp.
3. Refer to the table with
the relevant height for
your floor - provided in
the first part of the trim
code.
1
3
4. Find your trim letter
or number in the
table - provided in
the second part of
the trim code.
4
2
5. Scan across to
choose a length and
find your price.
5
PROFILES
153
30/04/2015 13:25
PROFILO™
SOLID OAK PROFILES
TWIN PROFILE
RAMP PROFILE
Medium - For floors 15mm in depth
57
57
6
20
21
15
24
16.5
Trim Code
M, O, U
1 - 24
15
13
16.5
Length (m)
Product Code
RRP (inc VAT)
0.99
69-T?M-100
£14.00
2.70
69-T?M-240
£37.00
0.99
69-T?M-100
£20.00
2.70
69-T?M-240
£54.00
Trim Code
20
10
Length (m)
Product Code
RRP (inc VAT)
0.99
69-R?M-100
£14.00
M, O, U
1 - 24
High - For floors 20mm in depth
10
2.70
69-R?M-240
£37.00
0.99
69-R?M-100
£20.00
2.70
69-R?M-240
£54.00
57
57
6
24
25
19
16.5
Trim Code
M, O, U
1 - 24
24
Length (m)
13
16.5
Product Code
19
RRP (inc VAT)
0.99
69-T?H-100
£16.00
2.70
69-T?H-240
£43.00
0.99
69-T?H-100
£20.00
2.70
69-T?H-240
£54.00
Trim Code
M, O, U
1 - 24
10
Length (m)
20
10
Product Code
RRP (inc VAT)
0.99
69-R?H-100
£16.00
2.70
69-R?H-240
£43.00
0.99
69-R?H-100
£20.00
2.70
69-R?H-240
£54.00
GET YOUR PRODUCT CODE
Create your unique product code by replacing the question mark in the product code provided with your trim code.
Example: for a Profilo High 16 Twin profile in 2.70m the product code 69-T?H-240 becomes 69-T16H-240.
154
PROFILES
30/04/2015 13:25
SOLID OAK PROFILES
SEMI-RAMP PROFILE
END PROFILE
39.5
40.5
7.8
6
21
21
15
15
9
14.3
Trim Code
17
24
8.2
Length (m)
Product Code
RRP (inc VAT)
0.99
69-S?M-100
£14.00
M, O, U
1 - 24
2.70
69-S?M-240
£37.00
0.99
69-S?M-100
£20.00
2.70
69-S?M-240
£54.00
Trim Code
Length (m)
Product Code
RRP (inc VAT)
0.99
69-E?M-100
£14.00
M, O, U
1 - 24
16
2.70
69-E?M-240
£37.00
0.99
69-E?M-100
£18.00
2.70
69-E?M-240
£48.00
48.5
40.5
7.8
6
25
25
19
19
9
14.3
Trim Code
M, O, U
1 - 24
Length (m)
26
24
8.2
Product Code
RRP (inc VAT)
0.99
69-S?H-100
£16.00
2.70
69-S?H-240
£43.00
0.99
69-S?H-100
£20.00
2.70
69-S?H-240
£54.00
Trim Code
M, O, U
1 - 24
Length (m)
16
Product Code
RRP (inc VAT)
0.99
69-E?H-100
£16.00
2.70
69-E?H-240
£43.00
0.99
69-E?H-100
£20.00
2.70
69-E?H-240
£54.00
TRIMS TIP
When using coloured profiles to finish your floor, it is good practice to select the boards that will be used at the perimeters
and doorways before installation. This allows you to obtain the best possible match between your flooring and trims.
PROFILES
155
30/04/2015 13:25
CONTOUR™
SOLID WOOD PROFILES
TWIN PROFILE
RAMP PROFILE
Medium - For floors 15-18mm in depth
50
62
15
10
16
20
10
10
21
10
13
13.5
17
Trim Code
M, O, U
1 - 24
W
17
Length (m)
Product Code
RRP (inc VAT)
0.99
11-T?M-990
£19.00
2.70
11-T?M-300
£51.00
0.99
11-T?M-990
£22.00
2.70
11-T?M-300
£59.00
0.99
11-T?M-990
£27.00
2.70
11-T?M-300
£80.00
Trim Code
Product Code
RRP (inc VAT)
0.99
11-R?M-990
£24.00
M, O, U
1 - 24
W
High - For floors 18-22mm in depth
30
Length (m)
2.70
11-R?M-300
£64.00
0.99
11-R?M-990
£26.00
2.70
11-R?M-300
£70.00
0.99
11-R?M-990
£37.00
2.70
11-R?M-300
£106.00
66
50
15
10
16
20
10
10
27
18
18
16
17
Trim Code
M, O, U
1 - 24
17
Length (m)
Product Code
RRP (inc VAT)
0.99
11-T?H-990
£21.00
2.70
11-T?H-300
£56.00
0.99
11-T?H-990
£24.00
2.70
11-T?H-300
£65.00
Trim Code
M, O, U
1 - 24
35
Length (m)
Product Code
RRP (inc VAT)
0.99
11-R?H-990
£26.00
2.70
11-R?H-300
£70.00
0.99
11-R?H-990
£30.00
2.70
11-R?H-300
£81.00
Create your unique product code by replacing the question mark in the product code provided with your trim code.
Example: for a Contour Medium 20 Ramp profile in 0.99m the product code 11-R?M-990 becomes 11-R20M-990.
156
PROFILES
30/04/2015 13:25
SOLID WOOD PROFILES
SEMI-RAMP PROFILE
END PROFILE
55
16
40
17
7
10
10
13
10
10
17
10
17
Length (m)
Product Code
RRP (inc VAT)
0.99
11-S?M-990
£24.00
M, O, U
1 - 24
W
2.70
11-S?M-300
£64.00
0.99
11-S?M-990
£26.00
2.70
11-S?M-300
£70.00
0.99
11-S?M-990
£37.00
2.70
11-S?M-300
£106.00
Trim Code
Product Code
RRP (inc VAT)
0.99
11-E?M-990
£19.00
1 - 24
W
2.70
11-E?M-300
£51.00
0.99
11-E?M-990
£22.00
2.70
11-E?M-300
£59.00
0.99
11-E?M-990
£27.00
2.70
11-E?M-300
£73.00
40
59
17
16
10
10
27
15
15
17
6
Length (m)
M, O, U
18
19
10
10
13
Trim Code
8
21
19
10
18
12
13
8
6
12
17
Trim Code
M, O, U
1 - 24
Length (m)
Product Code
RRP (inc VAT)
0.99
11-S?H-990
£26.00
2.70
11-S?H-300
£70.00
0.99
11-S?H-990
£30.00
2.70
11-S?H-300
£81.00
Trim Code
M, O, U
1 - 24
Length (m)
Product Code
RRP (inc VAT)
0.99
11-E?H-990
£21.00
2.70
11-E?H-300
£56.00
0.99
11-E?H-990
£24.00
2.70
11-E?H-300
£65.00
NEED HELP SELECTING A PROFILE?
See our guide on page 153
PROFILES
157
30/04/2015 13:25
SOLID WOOD PROFILES
SCOTIA PROFILE
60
14
10
13
35
19
44
30
19
15
Trim Code
M, O, U
1 - 24
W
Length (m)
Product Code
RRP (inc VAT)
Trim Code
Length (m)
Product Code
RRP (inc VAT)
1.00
11-FW?-100
£32.00
M, O, U
2.70
11-HS?-300
£18.00
2.70
11-FW?-300
£86.00
1 - 24
2.70
11-HS?-300
£20.00
1.00
11-FW?-100
£37.00
W
2.70
11-HS?-300
£31.00
2.70
11-FW?-300
£100.00
1.00
11-FW?-100
£48.00
2.70
11-FW?-300
£137.00
METAL PROFILES
TWIN PROFILE
RAMP PROFILE
41
37
10
10
Colour
Silver
8
Length (m)
Product Code
RRP (inc VAT)
0.99
11-BTS-990
£13.00
3.00
11-BTS-300
£36.00
Colour
Silver
Length (m)
Product Code
RRP (inc VAT)
0.99
11-BRS-990
£13.00
3.00
11-BRS-300
£36.00
END PROFILE
28
NEED HELP SELECTING A PROFILE?
See our guide on page 153
11
Colour
Silver
158
Length (m)
Product Code
RRP (inc VAT)
0.99
11-BES-990
£13.00
3.00
11-BES-300
£36.00
PROFILES
30/04/2015 13:25
BAMBOO
WARWICK® & STYLE® PROFILES
TWIN PROFILE - STYLE
TWIN PROFILE - WARWICK
48
10
15
50
19
10
14
15
18
10
Colour
Length (m)
Product Code
RRP (inc VAT)
Coffee
1.80m
20-EXC-001
£25.00
Colour
Length (m)
Product Code
RRP (inc VAT)
Natural
1.80
20-EXN-001
£25.00
Coffee
2.00
26-TSC-011
£25.00
Saddle
1.80
20-EXS-001
£25.00
Natural
2.00
26-TSN -010
£25.00
White
1.80
20-EXW-001
£25.00
RAMP PROFILE - STYLE
RAMP PROFILE - WARWICK
48
50
19
15
Colour
Length (m)
Product Code
RRP (inc VAT)
Coffee
2.00
26-RDC-011
£25.00
Natural
2.00
26-RDN-010
£25.00
QUADRANT PROFILE - WARWICK
Colour
Length (m)
Product Code
RRP (inc VAT)
Coffee
1.80
20-RAC-001
£25.00
Natural
1.80
20-RAN-001
£25.00
Saddle
1.80
20-RAS-001
£25.00
White
1.80
20-RAW-001
£25.00
QUADRANT PROFILE - STYLE
19
19
19
19
Colour
Length (m)
Product Code
RRP (inc VAT)
Coffee
2.00
26-QRC-011
£13.50
Natural
2.00
26-QRN-010
£13.50
END PROFILE - STYLE
Colour
Length (m)
Product Code
RRP (inc VAT)
Coffee
1.80
20-QUC-001
£13.50
Natural
1.80
20-QUN-001
£13.50
Saddle
1.80
20-QUS-001
£13.50
White
1.80
20-QUW-001
£13.50
STAIR NOSING PROFILE - STYLE
48
19
80
Colour
Length (m)
Product Code
RRP (inc VAT)
Coffee
1.80
20-EGC-001
£25.00
Natural
1.80
20-EGN-001
£25.00
Saddle
1.80
20-EGS-001
£25.00
White
1.80
20-EGW-001
£25.00
19
Colour
Length (m)
Product Code
RRP (inc VAT)
Coffee
1.80
20-STC-001
£35.00
Natural
1.80
20-STN-001
£35.00
Saddle
1.80
20-STS-001
£35.00
White
1.80
20-STW-001
£35.00
PROFILES
159
30/04/2015 13:25
LAMINATE
WOOD EFFECT PROFILES
We offer a trim to complement
every design in the Olsen
laminate range so you can finish
your floor in style. Careful colour
analysing processes ensure that
these profiles provide a near
exact match to their equivalent
floor. Choose from our selection
of transitions and edges to meet
your floor finishing requirements.
Trim Code
OLSEN
Trim Code
OLSEN
238
Olsen Linen Oak
247
Olsen Prairie Oak
239
Olsen Aspen Oak
246
Olsen Cotswold Oak
241
Olsen Coastal Oak
249
Olsen Vintage Oak
242
Olsen Washed Oak
258
Olsen Woodland Oak
259
Olsen Driftwood
260
Olsen Warm Walnut
261
Olsen Nordic Oak
251
Olsen Oak Cognac
257
Olsen Vintage Mink
252
Olsen Double Smoked
245
Olsen Summer Oak
255
Olsen Burnt Oak
244
Olsen Natural Oak
256
Olsen Midnight Silver
TWIN PROFILE
RAMP PROFILE
44
45
3.3
8
12
4.7
Length (m)
Product Code
RRP (inc VAT)
Length (m)
Product Code
RRP (inc VAT)
2.70
40-EXP-???
£28.00
2.70
40-RAM-???
£28.00
END PROFILE
36
54
3.3
4.2
8
18
Length (m)
Product Code
RRP (inc VAT)
Length (m)
Product Code
RRP (inc VAT)
2.70
40-EDG-???
£28.00
2.70
40-STA-???
£35.00
SCOTIA PROFILE
16
16
Length (m)
Product Code
RRP (inc VAT)
2.70
40-SCO-???
£6.00
160
PROFILES
Create the unique product code for your laminate
profile by adding the trim code of your floor choice
to the end of the product code provided.
Example: for Olsen Prairie Oak Stair Nosing with
trim code 247, 40-STA-??? becomes 40-STA-247
30/04/2015 13:26
ACCESSORIES
SKIRTING & PIPE COVERS
SKIRTING BOARDS
Skirting serves as a smooth transition from floor to wall with the intention of concealing expansion gaps and unsightly wiring.
SOLID OAK
OAK VENEER
Our dual purpose solid oak skirting allows you to choose between a Torus and
Ogee profile. Made from rustic grade timber and available as either a lacquered
or unfinished board.
Finished size: 20 x 145 x 2400mm.
Our real oak veneered skirting offers a modern pencil round profile with a
moulded rear rebate to conceal unsightly wires. Optional skirting clips are
available for a glueless installation.
Finished size: 16 x 95 x 2500mm.
Code
RRP
(inc. VAT)
Code
RRP
(inc. VAT)
69-SKU-145 - Unfinished
£45.00
11-VOS-095 - Skirting
£39.00
69-SKO-145 - Lacquered
£55.00
11-SKC-050 - Skirting Clips (Pack of 50)
£22.00
PIPE COVERS
Pipe covers are used to conceal the necessary expansion gaps and unsightly imperfections around the base of your radiator pipes.
SOLID
PLASTIC
Hardwood pipe covers are supplied in two halves with a unique jigsaw design
that allows them to click together creating a seamless joint. Sold (pre-packed)
as pairs, with a set inside diameter of 15mm. Available in 7 prefinished
(lacquered) species as well as unfinished oak.
Single piece, matt plastic pipe covers with laser incision for easy installation.
Simply slide the ring around the pipe and allow to snap into position. Sold in
packs of four and available in 6 different colours with a set inside diameter
of 15mm.
Code
Colour
Per
Pack
RRP
(inc. VAT)
Code
Colour
Per
Pack
RRP
(inc. VAT)
Code
55-SPU-150
Unfinished
2
£9.00
55-SPM-150
Maple
2
£9.00
06-PPO-150
Oak
55-SPO-150
Oak
2
£9.00
55-SPR-150
Merbau
2
£9.00
06-PPB-150
Beech
55-SPB-150
Beech
2
£9.00
55-SPW-150
Walnut
2
£9.00
06-PPC-150
Cherry
4
£5.00
55-SPC-150
Cherry
2
£9.00
55-SPA-150
Ash
2
£9.00
06-PPM-150
Maple
4
£5.00
RRP_15_Accessories.indd 161
Colour
ACCESSORIES
Per
Pack
RRP
(inc. VAT)
Code
Colour
Per
Pack
RRP
(inc. VAT)
4
£5.00
06-PPR-150
Merbau
4
£5.00
4
£5.00
06-PPW-150
White
4
£5.00
161
30/04/2015 13:27
UNDERLAY & BARRIERS
CUSHION & PROTECT YOUR FLOOR
DPM
Code
Depth
(mm)
Per
Roll
RRP
(inc. VAT)
Code
Depth
(mm)
Per
Roll
RRP
(inc. VAT)
49-GBO-015
3
15m2
£26.00
49-GBP-015
3
15m2
£35.00
BASIC 20
AQUASTOP
Dense yet lightweight economy foam underlay offering a good degree
of comfort and support with reasonable sound and thermal insulating
properties. Minimal ability to correct subfloor irregularities. Ideal solution
when cost is important and in areas where moisture issues are of no
concern e.g. first floor bedrooms. Tog Rating 0.84.
Designed especially for ground floor installations where excess moisture
could be present. Similar in specification to the Basic 20, with the addition
of a laminated Damp Proof Membrane (DPM) and 80mm overlap to ensure
ultimate protection against moisture migration. A popular and economic
solution when floating a floor. Tog Rating 0.84.
DPM
Code
Depth
(mm)
Per
Roll
RRP
(inc. VAT)
49-FME-010
3.6
10m2
£49.00
49-FME-015
3.6
15m2
£72.00
Code
Depth
(mm)
Per
Roll
RRP
(inc. VAT)
49-UME-010
3.6
10m2
£49.00
FLOORMATE
UNDERMATE
High performance rubber underlay incorporating a foil vapour barrier to
prevent moisture migration. Designed to withstand heavy foot traffic. The
preferred option for all floating installations as it offers the best combination of
comfort and support together with sound and thermal insulating properties.
Similar in specification to the Floormate, this low tog version has been
specifically designed for use with underfloor heating. When installing over
underfloor heating please ensure a Damp Proof Membrane is installed first to
prevent moisture migration. Tog Rating 0.55.
Code
Depth
(mm)
Per
Roll
RRP
(inc. VAT)
Code
Depth
(mm)
Per
Roll
RRP
(inc. VAT)
49-STS-003
3
10m2
£89.00
49-SSK-001
3
16.5m2
£89.00
SOLITEC
ACOUSTAMAT
A specialist underlay with a strong self-adhesive backing that enables both
a solid wood and engineered floor to be floated. No adhesive or nail gun
required! Always use in conjunction with a Damp Proof Membrane (DPM)
to protect against moisture migration.
A slatted acoustic underlay to be used in combination with the WP50
Adhesive Sausages and Bulk Gun as part of a liquid batten system. The precut areas provide a template for the adhesive and once installed it forms a
reliable acoustic barrier. Ideal for use on uneven subfloors.
162
ACCESSORIES
30/04/2015 13:28
DPM
DPM
overlap edges by 250mm
Code
Width
(mm)
Per
Roll
RRP
(inc. VAT)
Code
Depth
(mm)
Per
Pack
RRP
(inc. VAT)
53-MBP-001
1000
25m2
£80.95
49-WXL-001
6
6m2
£20.00
MOISTOP BARRIER PAPER
XL UNDERLAY
Purpose made moisture resistant barrier paper for use when secret nailing a
wooden floor over a timber based subfloor. The bitumen backing self-seals
around the punctures formed by nails to maintain a watertight barrier and
help to prevent cupping or moisture migration.
Disguises minor irregularities (up to 3mm) within the subfloor. Made from
lightweight extruded polystyrene, the boards offer exceptional sound and
thermal insulation as well as moisture protection when taped together.
Dimensions: 500 x 1200mm, 10 per pack. Tog Rating 1.1.
DPM
Code
Depth
(mm)
Per
Pack
RRP
(inc. VAT)
37-DPM-100
(4m x 25m)
1000
gauge
100m2
£78.95
Code
Size
RRP
(inc. VAT)
10-VPT-097
75mm x 25m
£6.95
DAMP PROOF MEMBRANE (DPM)
VAPOUR TAPE
A durable membrane designed to be used in combination with a cushioning
underlay to prevent the passage of moisture when floating a floor.
Manufactured from high quality polyethylene (1000 gauge), it has been
designed to provide superior strength and high puncture resistance.
This self-adhesive foil tape provides a vapour resistant seal when used to
join Woodpecker underlay or membranes. As well as forming part of a
moisture barrier, it can also be used to simply strengthen underlay joins.
Single-sided tape with good instant adhesion.
BLUE DAMP PROOF BARRIER
DPM
An impermeable membrane designed to isolate a floor from damp substrates.
Its dimpled surface allows for air flow beneath the barrier making it ideal
for basements or recently screeded floors as it allows the substrate to dry
out without delaying the installation. This doesn’t negate the need to check
atmospheric humidity. Tog Rating 1.5.
• Cushioning and impact sound deadening
• Unlike epoxy or resin liquid membranes, it won’t break down with any
subfloor movement
• Allows for a maximum of 3mm variation in substrate height over 3m.
• Supplied with an overlap on one edge to prevent moisture migration.
• Sealing putty is designed to seal the edges of the room and around pipes.
Code
Size &
Coverage
RRP
(inc. VAT)
47-DPB-000 (DPM)
2.05m x 20m = 41m2
£399.95
47-WST-000 (Sealing Putty)
30mm x 20m
£91.95
ACCESSORIES
163
30/04/2015 13:28
ADHESIVE & SEALANTS
ADHESIVE & SUBFLOOR PREPARATION
Code
Code
Size
(kg)
Covers
(approx)
RRP
(inc. VAT)
23-LBS-001
31-SMS-099
16
16m2
£165.00
23-MAG-001
Size
(cc)
Covers
RRP
(inc. VAT)
600
2m2
£11.50
N/A
N/A
£49.00
MS PARQUET
WP50 SAUSAGES
A purpose-made adhesive developed specifically for use with Woodpecker
floors. Designed to hold the boards after a short open time (30mins) but
remains permanently flexible once cured to allow for the expansion and
contraction of the timber between seasons.
A purpose-made adhesive designed for use with the slatted Acoustamat
underlay as part of a liquid batten system. Remains permanently flexible
once cured to allow for the expansion and contraction of the timber
between seasons. Apply using a gun applicator.
DPM
Code
Size
(kg)
Covers
Approx
RRP
(inc. VAT)
Code
Size
(Litre)
Covers
Approx
RRP
(inc. VAT)
31-WPA-505
0.5
5m2
£7.00
23-LDP-001
5
25m2
£160.00
FLOORING GRADE PVA
WP60 LIQUID DPM
A premium flooring grade PVA adhesive for hardwood flooring.
Typically used when floating a floor to bond tongue and groove (T&G)
boards together. Easy to apply, solvent free and fully cured within four
hours of application.
A reliable liquid membrane designed to prevent residual moisture within
a screed from penetrating a new timber floor. Apply using a roller for a
seamless barrier. Fully cured within 30 minutes. Single coat application
when used in combination with the Woodpecker MS Parquet Adhesive.
Code
Size
Product
Code
Size
(Litre)
Covers
RRP
(inc. VAT)
RRP
(inc. VAT)
12-LXC-001
20kg
Level-X
£35.00
31-WSP-001
5
N/A
£40.00
12-LXP-001
1L
Primer
£16.00
11P SURFACE PRIMER
LEVEL-X & PRIMER
High performance surface primer used to seal dusty or porous substrates in
preparation for the Woodpecker MS Parquet adhesive, Woodpecker WP50
sausages, or the Woodpecker WP60 Liquid DPM. Improves adhesion on
difficult substrates.
A fibre-reinforced self-levelling compound designed to prepare and smooth
surface irregularities. Application may vary from 2–50mm in a single pour.
Substrates should be primed in advance to assist adhesion and prevent
contamination.
164
ACCESSORIES
30/04/2015 13:28
LEVEL-X FORMULA
Approx thickness of screed (mm) x 1.7 x m2 of floor = No.of bags
20 (kg)
LEVEL-X SELF-LEVELLING COMPOUND & PRIMER
A fibre-reinforced self-levelling compound designed to prepare and
smooth surface irregularities. Application may vary from 2-50mm in a
single pour. Substrates should be primed in advance to assist adhesion
and prevent contamination.
Preparation: The condition of the existing floor determines the final
strength of the compound. The surface should be firm, cohesive and free
from loose particles, dust, dirt and grease.
Priming: Should not be done until the surface is prepared and dry enough
that the primer adheres. Porous and impermeable surfaces should be
treated with primer in different proportions according to the instructions.
The minimum ambient temperature is 6°C, the optimum is 10-18°C.
Mixing: Preferably done with an electric mixer or a mixing pump, until
achieving an even smooth texture. Remains workable for approximately
30 minutes in optimum temperature.
Application to concrete, plaster, ceramic tiles, painted surfaces:
Thickness 2-50mm.
Application to wooden floors: Thickness 5-50mm.
Application to heated floors: The compound must cover the heating
cables by a minimum thickness of 5-10mm.
Building up a fall: A mix with reduced water content must be applied
along the wall. The compound will flow towards the floor drain, which
must be edged with a retaining strip to prevent blockage.
Finishing: The drying time will depend on the moisture content of the
underlay. Normally, ceramic tiles can be laid after 6-12 hours. At least
12-18 hours should be allowed after a mix has been applied before damp
proofing.
ACCESSORIES
165
30/04/2015 13:28
FLOOR CARE
LONG-TERM MAINTENANCE
ONE COAT SOAP
ONE COAT CLEANER
ONE COAT OIL
A concentrate cleaning solution for oiled floors.
Dilute in 150mls of water for everyday use. Do
not use for 3 weeks after restoring your floor with
an application of One Coat Oil.
Used to clean and strip the surface of an oiled
floor before applying the One Coat Oil. Drying
time will vary from 15-60 mins depending on
saturation.
This durable oil provides a new surface finish in simply one
coat! The Pure finish will enhance the grain and enrich the
natural colours of the timber while the Natural finish will
leave the timber looking similar to its unfinished state.
Code
Size
(Litre)
Covers
m2/L
RRP
(inc. VAT)
Code
Size
(Litre)
Covers
m2/L
RRP
(inc. VAT)
Code
Size
(Litre)
Covers
m2/L
RRP
(inc. VAT)
81-OCS-002
2
N/A
£43.95
81-OCC-001
1
N/A
£28.95
81-OCO-001
1 (Pure)
40-50
£87.95
81-OCN-001
1 (Natural)
40-50
£108.95
OSMO FLOOR CARE
ULTIMO FLOOR LACQUER
Osmo are a leading brand in wood floor protection. Wash and Care is a special cleaning concentrate for
everyday use. The Liquid Wax Cleaner can be used for initial cleaning, maintaining and refreshing your floor.
Osmo Hardwax Oil is a clear, satin-matt oil.
Silk Matt finish. Ideal for finishing wooden floors.
Available in 2 grades depending on traffic levels.
Can be applied after intermediate sanding on most
wax-free and fat-free surfaces. Covers 8-10m2/Litre..
Code
Description
Size
(Litre)
Covers
m2/L
RRP
(inc. VAT)
Code
Size
(L)
Wear
RRP
(inc. VAT)
08-OLW-084
Osmo Liquid Wax Cleaner
1
60
£31.95
52-WUL-004
4
Normal
£66.00
08-OHO-083
Osmo Hardwax Oil
2.5
25-30
£104.95
52-WUP-004
4
Heavy
£89.00
08-OWC-085
Osmo Wash & Care
1
100
£21.95
166
ACCESSORIES
30/04/2015 13:28
FLOOR CARE
ROUTINE MAINTENANCE
COLOURFILL REPAIR PASTE
TOUCH UP LACQUER
MAINTENANCE KIT
50g tube with 20ml solvent bottle for
Laminate floors.
Used to conceal small indentations and
scratches. Using the brush applicator
supplied within the lid, paint the lacquer
onto the affected area and leave to cure.
Specially formulated for the Woodpecker floors this comprehensive cleaning
kit consists of an antistatic mop with detachable handle, mop head, cleaner
fluid and trigger bottle.
Code
Colour
RRP
(inc. VAT)
Code
Size
(ml)
Finish
Code
Description
RRP
(inc. VAT)
Size
(cl)
RRP
(inc. VAT)
77-WKL-001
Kit For Lacquered Wood/ Laminate
80
£30.95
Kit For Oiled Wood
80
£30.95
06-UCF-005
Oak
£13.95
02-TUL-080
30
Silk Matt
£12.95
77-WKO-001
06-UCF-176
Dark Oak
£13.95
02-TUL-081
30
Matt
£12.95
77-WRC-001
Replacement Mop Head - Machine Washable
–
£12.50
06-UCF-043
Light Walnut
£13.95
77-WLC-001
Cleaner Refill For Lacquered Wood/ Laminate
80
£12.50
77-WOC-001
Cleaner Refill For Oiled Wood
80
£12.50
COIR MATTING
COLOURSEALANT MASTIC
FLOOR PROTECTORS
Coir matting should be an important
consideration when laying a new floor.
It should be used at each entrance as
a barrier for wet and dirty feet to trap
grit and prevent lasting damage. Grit
underfoot will have the same effect as
sandpaper against your new floor.
310ml gunnable cartridge for
Laminate floors.
Prevention rather than cure is the key to a beautiful floor! Our variety of felt
protectors and castor cups allow furniture to be moved with ease and without
marking your floor.
Code
Width
(mm)
Per
Roll
RRP
(inc. VAT)
42-COI-010
1000
N/A
£32.95
Code
Colour
RRP
(inc. VAT)
Code
Description
Size
Per
Pack
RRP
(inc. VAT)
06-UCS-204
Light Oak
£6.30
05-FFP-951
Heavy Duty Felt Pads (Round)
19mm
20
£4.95
06-UCS-206
Light Oak / Beech
£6.30
05-FFP-952
25mm
16
£4.95
06-UCS-222
Medium Oak
£6.30
05-FFP-953
38mm
8
£4.95
06-UCS-231
Antique Oak
£6.30
05-FFP-947
Heavy Duty Felt Pads (Various Sizes)
Multipack
-
£11.95
06-UCS-235
Cherry / Natural
£6.30
05-FFP-950
Heavy Duty Felt Pads (Rectangular)
113x153mm
2
£7.95
05-FCC-363
Castor Cups - Light Wood Grain
44mm
2
£8.95
05-FCC-364
Castor Cups - Light Wood Grain
60mm
2
£9.95
05-FCC-361
Castor Cups - Dark Wood Grain
44mm
2
£8.95
05-FCC-362
Castor Cups - Dark Wood Grain
60mm
2
£9.95
ACCESSORIES
167
30/04/2015 13:28
PACK CALCULATOR
LET US DO THE HARD WORK FOR YOU...
RANGE
Per Pack m2
1
2
3
4
5
6
7
8
9
10
York
2.29
4.58
6.87
9.16
11.45
13.74
16.03
18.32
20.61
22.9
Flink
1.5
3
4.5
6
7.5
9
10.5
12
13.5
15
Raglan 3-Strip
2.18
4.36
6.54
8.72
10.9
13.08
15.26
17.44
19.62
21.8
Raglan Oak
2.2
4.4
6.6
8.8
11
13.2
15.4
17.6
19.8
22
Raglan Walnut & Maple
1.05
2.1
3.15
4.2
5.25
6.3
7.35
8.4
9.45
10.5
Harlech 148mm
1.65
3.3
4.95
6.6
8.25
9.9
11.55
13.2
14.85
16.5
Harlech 189mm
2.1
4.2
6.3
8.4
10.5
12.6
14.7
16.8
18.9
21
Berkeley
2.11
4.22
6.33
8.44
10.55
12.66
14.77
16.88
18.99
21.1
1.3
2.6
3.9
5.2
6.5
7.8
9.1
10.4
11.7
13
Goodrich Planks
1.568
3.136
4.704
6.272
7.84
9.408
10.976
12.544
14.112
15.68
Goodrich Squares
0.784
1.568
2.352
3.136
3.92
4.704
5.488
6.272
7.056
7.84
Windsor 3-Strip
3.587
7.174
10.761
14.348
17.935
21.522
25.109
28.696
32.283
35.87
Windsor
3.203
6.406
9.609
12.812
16.015
19.218
22.241
25.624
28.827
32.03
Chepstow
2.11
4.22
6.33
8.44
10.55
12.66
14.77
16.88
18.99
21.1
1.444
2.888
4.332
5.776
7.22
8.664
10.108
11.552
12.996
14.44
Warwick
2.166
4.332
6.498
8.664
10.83
12.996
15.162
17.328
19.494
21.66
Style
1.532
3.064
4.596
6.128
7.66
9.192
10.724
12.256
13.788
15.32
1.98
3.96
5.94
7.92
9.9
11.88
13.86
15.84
17.82
19.8
SOLID
ENGINEERED
Chepstow Distressed
BAMBOO
LAMINATE
Olsen
168
PACK CALCULATOR
30/04/2015 13:28
Terms & Conditions
In the unlikely event that goods are delivered wrong or damaged,
it is the responsibility of the customer to ensure sufficient time is
allowed for a replacement to be sent.
WELCOME
1. DEFINITIONS
In these terms and conditions, the following words shall have the
following meanings:
“Buyer” shall mean any person, firm or company, to whom the
Company supplies Goods or Services or with whom the
Company enters into negotiations for the supply of Goods or
Services.
“Company” shall mean Woodpecker Trading Company trading as
Kenton Floors.
“Goods” shall mean products, articles or things which are
supplied by or which are the subject of negotiations for supply by
the Company to the Buyer.
“Services” shall mean services are supplied by or which are the
subject of negotiations/or supply by the Company to the Buyer.
TO THE WORLD OF WOODPECKER
2. MAKING THE CONTRACT
Kenton Floors is a third generation family owned business who have been
involved in the timber industry for over a quarter of a century. Our motto
has always been:
‘THE BEST IS ONLY JUST GOOD ENOUGH’
At Kenton Floors ‘Affordable quality’ is no idle claim. Our traditional high
standards of selection and machining of every plank of flooring – instituted
in the original small factory where the first floors were made – are still
applied today now that our manufacturing facilities extend to thirteen
state of the art factories around the globe. Every board goes through a rigid
quality and grading process to ensure that the highest possible standards
are met to guarantee your perfect satisfaction.
‘TRADITIONAL HAND FINISHING TO ACHIEVE
A TIMELESS ELEGANCE’
The boards are then put through finishing processes such as lacquering,
oiling or antiquing – many of which are carried out by hand using centuries
old traditions – for that timeless elegance that only a natural wood floor
can bring to your home.
Finally it is stored in our extensive warehousing facility where we hold large
stocks ready for immediate dispatch to fulfil your requirements. All so that
you can enjoy the natural elegance of timeless tradition without delay once
you have made your selection.
We trust you will experience as much pleasure from your floor as we have
had in bringing it to you.
‘YOUR SATISFACTION GUARANTEED WITH
A 25 YEAR WARRANTY’
2.1 The Company’s salesmen are not authorised representatives
and are not authorised to accept confirm or vary any order nor to
make any representation or promise on the Company’s behalf
2.2 Any estimate/quotation which comprises an invitation to
treat is open for a period of 30 days only from the date thereof,
provided that the Company has not previously withdrawn it. Any
order issued by the Buyer is subject to acceptance by the
Company and a contract will only be formed when the Company
has accepted the Buyer’s offer to buy in writing. Any offer made
by the Buyer must be confirmed in writing by the Buyer.
2.3 All orders are placed under these terms and conditions alone.
2.4 These terms and conditions exclude any other terms and
conditions inconsistent therewith which a Buyer might seek to
impose even though such other terms and conditions may be
submitted in a later document and/or purport to exclude or
supersede any terms or conditions with them or may be
contained in any offer acceptance or counter-offer made by the
Buyer.
2.5 All floors supplied by the Company must be fitted in
accordance with BS8201 (1987).
2.6 No variation of these terms and conditions is permitted
unless expressly accepted by a Director of the firm in writing.
3. CANCELLATION
Each Woodpecker floor carries this outstanding reassurance of our
confidence that you will not find a better value product anywhere on the
market. Your satisfaction depends on our care and attention to detail,
such as the careful selection of the trees before they are felled and the
way in which the timber is sawn, stacked and dried.
In most cases the sawn timber is air dried for over twelve months prior
to a 2 stage kilning and dehumidification process to achieve maximum
stability. It is then carefully selected for grain pattern, colour variation
and knots, to provide the many varied appearances that are available
within the Woodpecker range. It is then machined using the latest
technologies – in many cases to engineering tolerances that up to a few
years ago would have been thought impossible – so we can bring virtual
perfection to your floor.
OUR COMMITMENT TO SUSTAINABILITY
We care about the environment and go to great lengths to bring to you
products that have been manufactured from materials harvested with
this in mind.
Stringent attention to all products right from the source to your door
gives you the assurance that with a Woodpecker floor you are not
impacting negatively on the environment.
The Woodpecker Team
3.1 No cancellation by the Buyer is permitted except where
expressly agreed by a Director of the Company in writing.
3.2 The Buyer will in the event of agreed cancellation by the
Buyer indemnify the Company fully against all expenses incurred
up to the time of such cancellation together with by way of
liquidated damages a sum of 33 1/3% of the contract price which
shall be paid by the Buyer to the Company forthwith,
4. PRICE
4.1 All prices quoted are those ruling at the date of dispatch or
supply.
4.2 Unless otherwise stated all prices quoted are net, exclusive of
VAT, and in the case of Goods ex works.
4.3 The Company reserves the right at any time prior to delivery
of the Goods or supply of Services to adjust the price to take
account of any increase in the cost of raw materials, labour or
services or any currency fluctuations affecting the cost of
imported materials or services.
5. TERMS OF PAYMENT
5.1 All sums become due and payable under these terms and
conditions not later than 20th of the month following date
of invoice.
5.2 Time for payment shall be of the essence.
5.3 The Company reserves the right to charge interest at 2.5 per
centum per month on all overdue accounts, such interest being
deemed to accrue on a day to day basis from the due date for
payment under clause 5.1.
5.4 If the Buyer (being a Company) has a petition for its
appointed or all or any part of its assets or (being an individual)
becomes bankrupt or insolvent or enters into any arrangement
with its creditors or commits a material or serious breach of this
Agreement (and in the case of such a breach being remediable
fails to remedy it within 7 days of receiving notice to do so) he
will be deemed to have repudiated the Contract.
5.5 The Company reserves the right at any time at its discretion
to demand security for payment before continuing with or
delivering any Order, supplying any Goods or Services.
5.6 The Buyer accepts that in the event of non payment within
the payment period the Company will resort to legal action to
recover the debt in this instance a 20% surcharge will be added
to the outstanding amount to cover administration and agents
fees.
5.7 Where the Buyer is a company the directors agree to
guarantee payment personally, both jointly and severally, of any
outstanding amounts due in the event of their company being
unable to meet its financial commitments or becoming insolvent.
6. DELIVERY
PEFC Certified
This product is
from sustainably
managed forests and
controlled sources
PEFC/16-33-444
www.pefc.org
6.1 Delivery will be deemed to have been effected when the
Goods are ready for collection at the premises of the Company or
as the case may be the premises of the suppliers to the Company
in circumstances where the Goods are delivered direct from such
suppliers.
6.2 Time of delivery is not of the essence.
howsoever arising caused by its non-delivery or by the failure to
make Goods ready for collection on the due date.
6.4 The Company reserves the right to make delivery by
installment.
6.5 When delivery is to be by installments or the Company
exercises its right to deliver by installments under clause 6.4
hereof or if there be delay in the delivery of any one or more
installments for whatever reason this will not entitle the Buyer to
treat the contract as repudiated and/or to damages.
6.6 Deviations in quantity between the Goods delivered and
Goods ordered representing not more than 10 per cent by value
shall not give the Buyer any right to reject the Goods or to claim
contract rate for the quantity of the Goods delivered.
7. SUPPLY OF SERVICES
7.1 Time for the supply of Services is not of the essence.
howsoever arising caused by its failure to supply Services or any
part thereof on the due date.
7.3 The Company reserves the right to supply Services by
installment.
7.4 When the supply of Services is to be by installments or the
firm exercises its right to supply Services by installments under
clause 7.3 hereof or if there be a delay in the supply of any one or
more installments of Services for whatever reason this will not
entitle the Buyer to treat the contract as repudiated or to
damages.
7.5 Deviation in the quantity between Services supplied and the
Services ordered representing not more than 10 per cent by value
shall not give the Buyer any right to reject the Services or to claim
contract rate for the quantity of the Services supplied.
8. RISK AND THE PASSING OF PROPERTY IN GOODS
8.1 Risk in the Goods shall pass to the Buyer when the Goods are
delivered.
8.2 Notwithstanding risk in the Goods passing in accordance
with clause 8.1 hereof title in the Goods shall not pass to the
Buyer until whichever shall be the first to occur of the following:8.2.1 payment being received by the Company for the Goods and
Services and no other amounts then being outstanding from the
Buyer to the Company in respect of other Goods or Services
supplied by the Company
8.2.2 the Buyer selling the Goods in accordance with the
provisions of these terms and conditions in which case title to the
Goods shall be deemed to have passed to the Buyer immediately
prior to delivery of the Goods to the Buyer’s customers; and
8.2.3 the Company waiving its rights under this clause 8.2 in
respect of specified Goods or Services whereupon title to the said
Goods shall forthwith vest in the Buyer.
8.3 The Buyer is licensed by the Company to use or to agree to
sell the Goods delivered to the Buyer subject to the express
condition that the entire proceeds of any sale are held in trust for
the Company and are not mixed with other moneys or paid into
an overdrawn bank account and shall at all times be identifiable
as the Company’s moneys.
8.4 Until title to the Goods passes:
8.4.1 The Buyer will hold the Goods as fiduciary agent and bailee
for the Company;
8.4.2 the Goods shall, subject to clause 8.3, be kept separate and
distinct from all other property of the Buyer and of third parties
and in good and substantial repair and condition and be stored in
such a way as to be clearly identifiable as belonging to the
Company;
8.4.3 the Company may at any time revoke the power of sale and
use contained in clause 8.3 by notice to the Buyer if the Buyer is
in default beyond the 20th of the month following invoice in the
payment of any sum whatsoever due to the Company (whether
in respect of the Goods or any other Goods or Services supplied
at any time by it to the Buyer) or if the Company has bona fide
doubts as to the solvency of the Buyer;
8.4.4 The Buyer’s power of sale and use contained in clause 8.3
shall automatically cease if the Buyer has a petition presented for
its winding-up or passes a resolution for voluntary winding-up
appointed of all or any part of its assets or becomes bankrupts or
insolvent or enters into any arrangements with creditors or takes
or suffers any similar action in consequence of debts or carries
out or undergoes any analogues act or proceeding under foreign
law;
8.4.5 upon determination of the Buyer’s power of sale and use
pursuant to clause 8.4.3 or clause 8.4.4. the Buyer shall place any
of the Goods in its possession or under its control and unsold at
the disposal of the Company and the Company shall be entitled
to enter upon any premises of the Buyer for the purpose of
removing such Goods.
8.5 The Company shall at any time be entitled to appropriate any
payments made by the Buyer in respect of any Goods or Services
in settlement of such invoices or accounts in respect of such
Goods or Services as the Company may in its absolute discretion
think fit notwithstanding any purported appropriation to the
contrary by the Buyer.
9. LIEN AND STOPPAGE
9.1 Until such time as the title in the Goods has passed to the
Buyer the Company has the right to withhold delivery if the Buyer
(being a Company) has a petition presented for its winding-up or
passes a resolution for voluntary winding-up otherwise than for
the purpose of a bona fide amalgamation or reconstruction or
compounds with its creditors or has a receiver appointed of all or
any part of its assets or (being an individual) becomes bankrupt
or insolvent or enters into any arrangements with creditors or
takes or suffers any similar action in consequence of debts or
carries out or undergoes any analogous act or proceedings under
foreign law.
9.2 When the title in the Goods has passed to the Buyer and the
time for payment has fallen due but payment has not been made
or if the Buyer (being a Company) has a petition presented for its
otherwise than for the purposes of a bona fide amalgamation or
appointed of all or any part of its assets or (being an individual)
becomes bankrupt or insolvent or enters into any arrangements
with creditors or takes or suffers any similar action in
consequence of debts or carries out or undergoes any analogous
act or proceedings under foreign law the Company has
9.2.1 a lien on the Goods so long as the Company is in possession
of them
9.2.2 a right of stoppage in transit
9.2.3 a right of resale
9.3 For the avoidance of doubt it is hereby declared that nothing
in this clause shall affect the rights given to the Company by
ss.38-48 of the Sale of Goods Act 1979.
10. INSPECTION/SHORTAGES
10.1 The Buyer is under a duty to inspect the Goods forthwith on
delivery and satisfy himself as to the due performance of Services
forthwith after supply.
10.2 The Company shall be under no liability for any defects or
shortages that would be apparent on careful inspection if the
terms of this clause are not complied with, and, in any event will
be under no liability if a written complaint is not delivered to the
Company within 7 days of delivery or supply detailing the alleged
detect or shortage.
10.3 In all cases where defects or shortages in respect of Goods
are complained of the Company shall be under no liability in
respect thereof unless an opportunity to inspect the Goods is
given to the Company before any use is made thereof or any
alteration or modification is made thereto by the Buyer.
10.4 Subject to clauses 10.2 and 10.3 the Company shall make
good any defect or shortage in the Goods and where appropriate
replace any Goods damaged in transit as soon as it is reasonably
able to do so, but otherwise shall be under no liability whatsoever
or howsoever arising from such defect, shortage or damage.
10.5 Subject to clause 10.4 the Company shall remedy any defect
in the supply of Services as soon as it is reasonably able to do so
but otherwise shall be under no liability whatsoever or howsoever
arising from such defect
11. WARRANTY
11.1 The Buyer shall satisfy himself of the suitability of the Goods
or Services for any particular use or purpose and shall be totally
responsible
11.2 If the Goods are in such a state or the Services so defectively
supplied as would but for this condition entitle the Buyer to
repudiate the contract and/or claim damages from the Company
the Company reserves the right to repair or replace the Good or
perform the Service (or relevant part thereof) again.
12. LIABILITY
12.1 Introduction
12.1.1 Nothing in clause 12 shall be deemed to exclude or restrict
the Company’s liability for death or personal injury resulting from
negligence.
12.1.2 Each of the sub-clauses in clause 12 is to be treated as
separate and independent
12.1.3 The Company is willing to undertake liability additional to
that provided by this clause in exchange for a higher price
12.2 Exclusion
12.2.1 Clause 12.2 only covers defects caused by faulty design,
manufacture, materials or workmanship. It does not cover
defects caused by abnormal use, misuse or neglect.
12.2.2 The Company agrees that if any defect covered by clause
12.2 is discovered during the warranty period commencing with
the date of delivery or supply, the Company will remedy any
defect at its own expense or, in the case of Goods if it chooses to
do so, replace them.
12.2.3 The Buyer cannot claim the benefit of this clause unless
- he informs the Company of the relevant defect in writing within
7 working days of discovering it.
12.2.3a The company will not accept any liability for defects in
goods once they have been fitted. It is the buyers responsibility to
check the goods prior to installation.
12.2.4 The risk of accidental loss whilst the Goods are being
returned will be borne by the Buyer
12.2.5 In consideration for receiving the benefit of this clause, the
Buyer agrees that, apart from those terms set out in clause 10
and 11, all other terms, whether conditions, warranties or
innominate terms, express or implied, statutory or otherwise, are
excluded from the contract between the Company and the Buyer
to the extent permitted by law (except where the Buyer deals as
consumer within section 12 of the Unfair Contract Terms Act
1977 when the terms implied by sections 13, 14 and 15 of the Sale
of Goods Act 1979 shall be implied into the contract).
12.3 Exclusion of Consequential Loss.
The Company shall not be liable for any consequential or indirect
loss suffered by the Buyer whether this loss arises from breach of
a duty in contract or tort or in any other way (including loss
arising from the Company’s negligence).
Non-exhaustive illustrations of consequential or indirect loss
would be
– loss of profits
-loss of contracts
-damage to property of the Buyer or anyone else, and
-personal injury to the Buyer or anyone else (except so far as
such injury is attributable to the Company’s negligence)
12.4 Limitation
The Company’s total liability for any one claim or for the total of
all claims arising from any one act or default of the Company
(whether arising from the Company’s negligence or otherwise)
shall not exceed £1000 Or the contract price whichever is the
greater.
13. FORCE MAJEURE
13.1 The Company shall not be liable for any failure to deliver the
Goods or perform the Services arising from circumstances
outside the Company’s control.
13.2 Non-exhaustive illustrations of such circumstances would be
act of God, war, riot, explosion, abnormal weather conditions, fire,
flood, strikes, lockouts, Government action or regulations (UK or
otherwise), delay by suppliers, accidents and shortage of
materials, labour or manufacturing facilities.
13.3 Should the Company be prevented from delivering the
Goods or performing the Services in the above circumstances, it
shall give the Buyer written notice of this fact as soon as
reasonably practicable after discovering it.
13.4 If the circumstances preventing delivery of the Goods or
performing the Services are still continuing three months after
the Buyer receives the Company’s notice, then either party may
give written notice to the other cancelling the contract.
13.5 If the contract is cancelled in this way, the Company will
refund any payment which the Buyer has already made on
account of the price (subject to deduction of any amount the
Company is entitled to claim from the Buyer) but the Company
will not be liable to compensate the Buyer for any further loss or
damage caused by the failure to deliver the Goods or perform the
Services.
14. SALES PROMOTION DOCUMENTATION
Whilst the Company takes every precaution in the preparation of
its catalogue, technical circulars, price lists and its other literature,
these documents are for the Buyer’s general guidance only and
the particulars contained therein shall not constitute
representations by the Company and the Company shall not be
bound thereby.
15. NOTICES
Any notice to be given hereunder shall be in writing and shall be
deemed to have been duly given if sent or delivered to the party
concerned at its address specified overleaf or such other address
as that party may from time to time notify in writing and shall be
deemed to have been served, if sent by post, 48 hours after
posting.
16. CANCELLATION
The Company is prepared to accept the cancellation of a contract
provided that it is in writing and is received by the Company:
(a) in the case of special orders before the manufacture of the
goods has commenced:
(b) in the case of goods ordered from stock before the goods
have been despatched.
(c) but subject to liability for any losses incurred by the Company
in disposing of the goods.
17. MATCHING
For technical reasons it is not always possible to obtain an exact
colour match between different production batches which have
the same colour description. The Company therefore
recommends that all products should be of the same batch. The
Company will be under no liability whatsoever in respect of any
mismatching of tiles and sheet with the same colour description
where the tiles and sheet are of different batches.
18. ADVICE AND WARNINGS
(a) Without prejudice to any of the Company’s rights under these
terms or common law or statute the Company shall not be liable
for any loss or damage suffered by the Buyer or any third party as
a result of failure to follow any of the Company’s
recommendations with regard to the goods.
19. STILETTO HEELS
Where Stiletto heeled shoes are in use, floors are liable to suffer
damage from intense point loading pressure. We therefore
cannot be held responsible for any loss in appearance where such
heels are in use.
20. SUITABILITY OF GOODS
If requested in writing to do so, we will use our utmost
endeavours to give sound and honest advice as to the suitability
of goods sold by us for a particular use or purpose, but we do not
represent or warrant (and nobody has authority to represent or
warrant) the fitness of any goods for any particular purpose or
use, whether such use or purpose is known to us or not or any
advice requested regarding installation.
21. ASSIGNMENT
The Buyer shall not assign or purport to assign or transfer the
contract or the benefits thereof to any other person without prior
written consent of the other.
22. PROPER LAW AND JURISDICTION
The Contract shall be governed by and construed in accordance
with English law and all disputes arising in connection with the
contract shall be submitted to the jurisdiction of the English
Courts.
23. HEADINGS
The headings of these conditions are for convenience only and
shall have no effect on the interpretation thereof.
Revision Date: May 2015
Kenton Floors, Caerphilly CF83 8DR
Tel: 02920 888223
Kenton Floors reserves the right to update and amend these
terms and conditions without notice.
TERMS & CONDITIONS
169
WOODPECKER
Woodpecker House, 29 Pant Glas Industrial
Estate, Bedwas, Caerphilly, CF83 8DR
t: 02920 888223 [email protected]
f: 02920 881694 www.woodpeckerflooring.co.uk
MAY 2015 ISSUE 10
Head Office

THE COMPLETE FLOORING GUIDE

Transcription

Similar documents

Power, Steering Proxes R888 sticks to the track whilst you stick to

customer information sheet

Engineered Flooring - Lumber Liquidators

Hertco Express 20-DoorStyles_062013-A.indd

IntForumAgendaAndRegistration_16Nov2011

UP UP AND AWAY - Principato di Seborga

FLASH WAX!

Get info about What Is The Song Roulette By System Of A Down About

DINING - Hülsta

Property PDF