docNew Brochure 09-06-2009
download 
Report Transcription
New Brochure 09-06-2009
ubiquitous voice & data coverage solutions Shyam Telecom Ltd. 246 Udyog Vihar, Phase IV, Gurgaon, India Tel: +91 124 4311600, Fax: +91 124 4018116 Shyam Telecom Inc. 6 Kilmer Road, Suite D, Edison, NJ 08817, USA Tel: +1 732 985 1324, Fax: +1 732 907 1023 Shyam Telecom GmbH Frohsinnstrasse 16, D-63739 Aschaffenburg Tel. +49 6021 45 90 10, Fax: +49 6021 45 90 129 GSM CDMA TDMA PCS SMR E-mail : [email protected] www.shyamtelecom.com TOTAL COVERAGE FOR In-Building Tunnels & Subways Urban Shadowed Areas Isolated Valleys Rural Areas SPLITTER / COMBINERS 2 Way Splitter [800 – 2500 MHz] 3 Way Splitter [800 – 2500 MHz] 4 Way Splitter [800 – 2500 Mhz] 3 4 5 MULTICASTING MATRIX 2 way Multicasting Matrix [ 800 – 960 Mhz ] 2 way Multicasting Matrix [ 1700 – 2200 Mhz ] 2 way Multicasting Matrix [ 800 – 2500 Mhz ] 4 way Multicasting Matrix [ 800 – 2500 Mhz] 4 way Multicasting Matrix [ 800 – 960 Mhz ] 4 way Multicasting Matrix [ 1700 – 2200 Mhz ] 6 7 8 9 10 11 TABLE OF CONTENTS we make DIRECTIONAL COUPLERS Low Loss Power Tappers, 800-2500 MHz, 5 dB Coupling Low Loss Power Tappers, 800-2500 MHz, 7 dB Coupling Low Loss Power Tappers, 800-2500 MHz, 10 dB Coupling Low Loss Power Tappers, 806-2500 MHz, 15 dB Coupling 12 13 14 15 DIRECTIONAL COUPLERS [For Optical & Frequency Converter Repeaters] Directional Coupler, 806-960 MHz – 20/30/40/50 dB Directional Coupler, 1710-1990 MHz – 20/30/40/50 dB Directional Coupler, 1920-2170 MHz – 20/30/40/50 dB SHYAM is the oldest specialized Indian company for Antenna Electronic, R.F. Communication System. Together with its sister telecom operator companies employees more than 1000 people. SHYAM is the unique company, which has 30 years of experience in designing, Reception & Distribution of RF signals, 8 Years experience as GSM operator, 7 Years experience as V-Sat operator & 6 Years experience as CDMA operator. All our system components are technically harmonized to each other, so as to guarantee the best physically possible transmission quality. Nevertheless, because of the size of our undertaking we are also highly flexible- which is just what the market in today’s rapidly changing times demands. The construction of systems consisting of hundreds of different components, which must all form a functional whole at give time and specific place demands a high degree of mobility and logistic skill Our company philosophy is faithful to its chosen motto “Quality makes it’s way” what we think, what we do and what we make are all highly professional. We tailor-made to the whishes and specifications of our customers Outdoor coverage solutions & In Building Systems. We guarantee the systems. Our products have been known and recognized by mobile telecom operators FILTERS Band Pass Filter 890-960 Mhz ( FULL BAND ) Band Pass Filter 2nd Operator GSM 896-915 MHz Band Pass Filter 890-915 Mhz All Specifications are subject to change without prior notice 19 20 21 DIPLEXERS Diplexer / Cross Band Coupler [824-960 & 1710-1990] Diplexer Gsm+Dcs or Dcs+Umts Diplexer 22 23 TRIPLEXERS Triplexer 824-960,1710-1990,2400-2500 Gsm+Dcs 24 DUMMY LOADS 50 Ohms Terminators, Rating 2 W 50 Ohms Terminators, Rating 10 W 50 Ohms Terminators, Rating 25 W 50 Ohms Terminators, Rating 50 W 50 Ohms Terminators, Rating 100 W 25 26 27 28 29 ATTENUATOR Attenuator [ 3 dB ] Attenuator [ 6 dB ] Attenuator [ 10 dB ] Attenuator [ 20 dB ] Attenuator [ 30 dB ] www.shyamtelecom.com 16 17 18 All Specifications are subject to change without prior notice 30 31 32 33 34 www.shyamtelecom.com 1 Multi Band Omni Ceiling Antenna [806 – 2500 MHz] N-Connector Patch Panel Directional Dual Band Antenna [806 – 2500 MHz] Cable 35 36 OUTDOOR ANTENNAS Outdoor Directional Antenna [ 824 – 960 Mhz], 7 dBi Outdoor Directional Antenna [ 1710 – 2170 Mhz], 9 dBi Outdoor Dual Band Directional Antenna [ 824 – 2170 Mhz], 7/9 dBi 37 38 39 Outdoor Yagi Antenna [1710 –2170], 10 dBi Outdoor Yagi Antenna [806-960], 12 dBi Outdoor Yagi Dual Band [900-1800], 7/9 dBi Quad Band Yagi Antenna [800-2500], 8.5/ 11 dBi Outdoor Repeater Server Antenna [806-960], 16 dBi 40 41 42 43 44 ANTENNA INSTALLATION PART NO. REFERENCE 45-46 47 APPLICATIONS / ENGINEERING NOTES VSWR Conversion Chart GLOSSARY 48 49 LOW-LOSS POWER SPLITTER (2 Way Splitter) Product Description T hese Wideband Splitters are available for 2 way power splitting or providing two receiver outputs, terminated with N-Type Connectors. These splitters allow operation across the range from 800 MHz to 2.5 GHz making them particularly suitable for use in the distribution of multiple mobile operators signal into buildings and tunnels. 2 WAY SPLITTER TABLE OF CONTENTS INDOOR ANTENNAS Specifications Type No. 1173 0001 102 Frequency Range 800 – 2500 MHz VSWR 1.3:1 Max Impedance 50 Ohms Insertion Loss < 3.5 dB Termination N - Female Total Input Power Rating 150 Watts Dimension (mm) 203.5x25.7x44.1 mm Weight (Kgs) 0.230 kg Size (mm/inch) 215x50x35mm / 9”x2”x2” Operating temperature(oC/oF) -35oC to 70oC / -31oF to 158oF Operating Humidity 5 – 95% Ø Low Loss Ø Isolated Outputs Ø Low Power Combining Applications Feeder Network Distribution Multiple Receiver Outputs Antenna Arrays Combining Systems Material Housing : Aluminum 2 WAY SPLITTER DC capability DC transmission between all terminations (suitable for remote power supply systems). 2 www.shyamtelecom.com All Specifications are subject to change without prior notice All Specifications are subject to change without prior notice www.shyamtelecom.com 3 LOW-LOSS POWER SPLITTER (4 Way Splitter) Product Description Product Description T T T hese Wideband Splitters are available for 3 way power splitting or providing three receiver outputs, terminated with N-Type Connectors. hese splitters allow operation across the range from 800 MHz to 2.5 GHz making them particularly suitable for use in the distribution of multiple mobile operators signal into buildings and tunnels. Specifications hese Wideband Splitters are available for 4 way power splitting or providing four receiver outputs, terminated with N-Type Connectors. These splitters allow operation across the range from 800 MHz to 2.5 GHz making them particularly suitable for use in the distribution of multiple mobile operators signal into buildings and tunnels. Specifications Type No. 1173 0001 103 Type No. 1173 0001 104 Frequency Range 800 – 2500 MHz Frequency Range 800 – 2500 MHz VSWR 1.3:1 Max VSWR 1.3:1 Max Impedance 50 Ohms Impedance 50 Ohms Insertion Loss < 5 dB Insertion Loss < 6.5 dB Termination N - Female Termination N - Female Total Input Power Rating 150 Watts Total Input Power Rating 150 Watts Dimension (mm/inch) 203.6x62.3x24.8 mm Dimension (mm/inch) 203.6x62.3x43.4mm Weight (Kgs/lbs) 0.250 kgs Weight (Kgs/lbs) 0.27 kgs Operating temperature(oC/oF) -35oC to 70oC / -31oF to 158oF Operating temperature(oC/oF) -35oC to 70oC / -31oF to 158oF Operating Humidity 5 – 95% Operating Humidity 5 – 95% Ø Low Loss Ø Isolated Outputs Ø Low Power Combining Ø Low Loss Ø Isolated Outputs Ø Low Power Combining Applications Applications Feeder Network Distribution Multiple Receiver Outputs Antenna Arrays Combining Systems Feeder Network Distribution Multiple Receiver Outputs Antenna Arrays Combining Systems Material Material Housing : Housing Aluminum : 3 WAY SPLITTER 4 Aluminum 4 WAY SPLITTER DC capability DC capability DC transmission between all terminations (suitable for remote power supply systems). DC transmission between all terminations (suitable for remote power supply systems). www.shyamtelecom.com 4 WAY SPLITTER 3 WAY SPLITTER LOW-LOSS POWER SPLITTER (3 Way Splitter) All Specifications are subject to change without prior notice All Specifications are subject to change without prior notice www.shyamtelecom.com 5 2 WAY MULTICASTING MATRIX ( 800-960 Mhz ) Product Description T he Unit combines up to 2 Tx/Rx input ports from a radio base station to 2 output ports in a single distributed antenna system. T he Unit combines up to 2 Tx/Rx input ports from a radio base station to 2 output ports in a single distributed antenna system. The advantage of this is that minimum hardware needs to be installed and minimum of loss is retained. The advantage of this is that minimum hardware needs to be installed and minimum of loss is retained. Specifications Specifications Type No. 1164 0000 102 Type No. 1164 0001 102 Frequency Range 800 – 960 MHz Frequency Range 1700 – 2200 MHz VSWR 1.3:1 Max VSWR 1.3:1 Max Impedance 50 Ohms Impedance 50 Ohms Coupling 3.2 + 0.5 dB Coupling 3.2 + 0.5 dB Termination N - Female Termination N - Female Total Power Rating 100 Watts Total Power Rating 100 Watts Isolation > 20 dB Isolation > 20 dB Dimension (mm/inch) 102.6x76.2x18.4 mm Dimension (mm/inch) 100x75x30 mm / 4”x3”x1” Weight (Kgs/lbs) 0.270Kgs Weight (Kgs/lbs) 0.270Kgs / 0.6 lbs Approx Operating temperature(oC/oF) -35oC to 70oC / -31oF to 158oF Operating temperature(oC/oF) -35oC to 70oC / -31oF to 158oF Operating Humidity 5 – 95% Operating Humidity 5 – 95% OUT TRX1 & TRX2 TRX1 + TRX2 2 WayWay-2 Way Matrix IN IN TRX1 TRX2 Ø Low Loss Ø Wide Bandwidth Ø Isolated Outputs Ø Easy to Install Ø Low Loss Ø Wide Bandwidth Ø Isolated Outputs Ø Easy to Install Applications Applications Multiple Receiver Outputs Antenna Arrays Combining Systems Multiple Receiver Outputs Antenna Arrays Combining Systems 806-960 Mhz Material Material Housing : Aluminum Housing : Aluminum 2 WAY MULTICASTING MATRIX [800-960] 6 (1700 – 2200 Mhz) Product Description www.shyamtelecom.com All Specifications are subject to change without prior notice OUT TRX1 & TRX2 TRX1 + TRX2 2 WAY MULTICASTING MATRIX 2 WAY MULTICASTING MATRIX 2 WAY MULTICASTING MATRIX 2 WayWay-2 Way Matrix IN IN TRX1 TRX2 2 WAY MULTICASTING MATRIX [1700-2200] All Specifications are subject to change without prior notice www.shyamtelecom.com 7 4 WAY MULTICASTING MATRIX ( 800-2500 Mhz ) Product Description T he Unit combines up to 2 Tx/Rx input ports from a radio base station to 2 output ports in a single distributed antenna system. (800 – 2500 Mhz) Product Description T he Unit combines up to 4 Tx/Rx input ports from a radio base station to 4 output ports in a single distributed antenna system. The advantage of this is that minimum hardware needs to be installed and minimum of loss is retained. The advantage of this is that minimum hardware needs to be installed and minimum of loss is retained. Specifications Specifications Type No. 1164 0011 102 Type No. 1164 0011 104 Frequency Range 800 – 2500 MHz Frequency Range 800 - 2500 MHz VSWR 1.3:1 Max VSWR 1.3:1 Max Impedance 50 Ohms Impedance 50 Ohms OUT TRX1 & TRX2 TRX1 + TRX2 Coupling 3.2 + 0.5 dB Termination N - Female Total Power Rating 100 Watts Isolation > 20 dB Dimension (mm/inch) 102.6x76.2x18.4 mm Weight (Kgs/lbs) OUT TRX1+2+3+4 TRX1+2+3+4 TRX1+2+3+4 TRX1+2+3+4 Coupling 6.2 + 0.5 dB Termination N - Female 4 Way x 4 Way Matrix Total Power Rating 100 Watts 800 800–– 960 2500 MHz MHz Isolation > 20 dB Dimension (mm/inch) 150x60x25 mm / 6”x2”x1” 0.270Kgs Weight (Kgs/lbs) 0.6Kgs / 1.5 lbs Approx Operating temperature(oC/oF) -35oC to 70oC / -31oF to 158oF Operating temperature(oC/oF) -35oC to 70oC / -31oF to 158oF Operating Humidity 5 – 95% Operating Humidity 5 – 95% 2 WayWay-2 Way Matrix IN IN TRX1 TRX2 4 WAY MULTICASTING MATRIX 2 WAY MULTICASTING MATRIX 2 WAY MULTICASTING MATRIX TRX1 TRX2 TRX3 TRX4 IN Ø Low Loss Ø Wide Bandwidth Ø Isolated Outputs Ø Easy to Install Ø Low Loss Ø Wide Bandwidth Ø Isolated Outputs Ø Easy to Install Applications Applications Multiple Receiver Outputs Antenna Arrays Combining Systems Multiple Receiver Outputs Antenna Arrays Combining Systems 806-960 Mhz Material Material Housing : Aluminum Housing : Aluminum 4 WAY MULTICASTING MATRIX [800-2500] 2 WAY MULTICASTING MATRIX [800-960] 8 www.shyamtelecom.com All Specifications are subject to change without prior notice All Specifications are subject to change without prior notice www.shyamtelecom.com 9 4 WAY MULTICASTING MATRIX (800 – 960 Mhz) Product Description T he Unit combines up to 4 Tx/Rx input ports from a radio base station to 4 output ports in a single distributed antenna system. T he Unit combines up to 4 Tx/Rx input ports from a radio base station to 4 output ports in a single distributed antenna system. The advantage of this is that minimum hardware needs to be installed and minimum of loss is retained. The advantage of this is that minimum hardware needs to be installed and minimum of loss is retained. Specifications Specifications Type No. 1164 0000 104 Type No. 1164 0001 104 Frequency Range 800 – 960 MHz Frequency Range 1700 – 2200 MHz VSWR 1.3:1 Max VSWR 1.3:1 Max Impedance 50 Ohms Impedance 50 Ohms OUT TRX1+2+3+4 TRX1+2+3+4 TRX1+2+3+4 TRX1+2+3+4 Coupling 6.2 + 0.5 dB Termination N - Female 4 Way x 4 Way Matrix Total Power Rating 100 Watts 806 – 960 MHz Isolation > 20 dB Dimension (mm/inch) 150x60x25 mm / 6”x2”x1” Weight (Kgs/lbs) OUT TRX1+2+3+4 TRX1+2+3+4 TRX1+2+3+4 TRX1+2+3+4 Coupling 6.2 + 0.5 dB Termination N - Female 4 Way x 4 Way Matrix Total Power Rating 100 Watts 1700 800 – 960 2200 MHz MHz Isolation > 20 dB Dimension (mm/inch) 150x60x25 mm / 6”x2”x1” 0.6 kgs/ 1.5 lbs Approx Weight (Kgs/lbs) 0.6Kgs / 1.5 lbs Approx Operating temperature(oC/oF) -35oC to 70oC / -31oF to 158oF Operating temperature(oC/oF) -35oC to 70oC / -31oF to 158oF Operating Humidity 5 – 95% Operating Humidity 5 – 95% TRX1 TRX2 TRX3 TRX4 IN Applications Applications Multiple Receiver Outputs Antenna Arrays Combining Systems Multiple Receiver Outputs Antenna Arrays Combining Systems TRX2 TRX3 TRX4 IN Material Material Housing : Aluminum Housing : Aluminum 4 WAY MULTICASTING MATRIX [800-960] www.shyamtelecom.com TRX1 Ø Low Loss Ø Wide Bandwidth Ø Isolated Outputs Ø Easy to Install Ø Low Loss Ø Wide Bandwidth Ø Isolated Outputs Ø Easy to Install 10 (1700 – 2200 Mhz) Product Description 4 WAY MULTICASTING MATRIX 4 WAY MULTICASTING MATRIX 4 WAY MULTICASTING MATRIX All Specifications are subject to change without prior notice 4 WAY MULTICASTING MATRIX [1700-2200] All Specifications are subject to change without prior notice www.shyamtelecom.com 11 ( Directional Couplers) 5 dB Product Description Product Description D A irectional Couplers are available to couple Power/Frequency at a pre-set coupling level with a coupling range of 5.0 dB. These broadband couplers allow operation across the range from 800 MHz to 2.5 GHz making them particularly suitable for use in the distribution of multiple mobile operators signal into buildings and tunnels. Specifications Type No. 1173 0001 105 Frequency Range 800 – 2500 MHz VSWR 1.4:1 Max Impedance 50 Ohms Tap Loss 01 – 02 01 – 03 1.5 dB 4.8 dB + 0.5 dB Termination N - Female Total Input Power Rating 150 Watts Dimension (mm/inch) 156x58x16.5mm Weight (Kgs/lbs) 0.210 kgs Operating temperature(oC/oF) -35oC to 70oC / -31oF to 158oF 5 – 95% Ø High Directivity Ø Good VSWR Ø High Power Ø Broadband 760 MHz to 2.2 GHz wide range of Directional Couplers are available to couple Power/Frequency at a pre-set coupling level with a coupling range of 7dB. These broadband couplers allow operation across the range from 800 MHz to 2.5 GHz making them Particularly suitable for use in the distribution of multiple mobile operators signal into buildings and tunnels. Type No. 1173 0001 107 Frequency Range 800 – 2500 MHz VSWR 1.4:1 Max Impedance 50 Ohms Tap Loss 01 – 02 0.9 dB 01 – 03 7.0 + 0.5 dB Termination N - Female Total Input Power Rating 150 Watts Dimension (mm/inch) 156x58x16.5mm Weight (Kgs/lbs) 0.210Kgs Operating temperature(oC/oF) -35oC to 70oC / -31oF to 158oF Operating Humidity 5 – 95% Applications Radiating Cable Networks Combiner Systems Testing Distributed Antenna Systems Radiating Cable Networks Combiner Systems Testing Distributed Antenna Systems Material Material : : Aluminum Brass Housing : Aluminum Inner conductor : Brass DC capability DC transmission only between input and port 01 02 is capacitive coupled. www.shyamtelecom.com 7dB Ø High Directivity Ø Good VSWR Ø High Power Ø Broadband 806 MHz to 2.2 Ghz Applications Housing Inner conductor (Directional Couplers) Specifications Operating Humidity 12 LOW-LOSS POWER TAPPERS LOW-LOSS POWER TAPPERS LOW-LOSS POWER TAPPERS LOW-LOSS POWER TAPPERS DC capability LOW LOSS POWER TAPPER - 5dB All Specifications are subject to change without prior notice DC transmission only between input and port O1. O2 is capacitive coupled. LOW LOSS POWER TAPPER - 7dB 13 10dB LOW-LOSS POWER TAPPERS Product Description Product Description A A wide range of Directional Couplers are available to couple Power/Frequency at a pre-set coupling level with a coupling range of 10 dB. (Directional Couplers) 15dB wide range of Directional Couplers are available to couple Power/Frequency at a pre-set coupling level with a coupling range of 15dB. These broadband couplers allow operation across the range from 800 MHz to 2.5 GHz making them Particularly suitable for use in the distribution of multiple mobile operators signal into buildings and tunnels. These broadband couplers allow operation across the range from 800 MHz to 2.5 GHz making them Particularly suitable for use in the distribution of multiple mobile operators signal into buildings and tunnels. Specifications Specifications Type No. 1173 0001 110 Type No. 1173 0001 115 Frequency Range 800 – 2500 MHz Frequency Range 800 – 2500 MHz VSWR 1.4:1 Max VSWR 1.4:1 Max Impedance 50 Ohms Impedance 50 Ohms Tap Loss 01 – 02 0.4 dB Tap Loss 01 – 02 0.12 dB 01 – 03 10.0+ 0.5 dB 01 – 03 15.0 - 0.5 dB Termination N - Female Termination N - Female Total Input Power Rating 150 Watts Total Input Power Rating 150 Watts Dimension (mm/inch) 156x585x16.5 mm Dimension (mm/inch) 156x58x16.5mm Weight (Kgs/lbs) 0.210Kgs Weight (Kgs/lbs) 0.210Kgs Operating temperature(oC/oF) -35oC to 70oC / -31oF to 158oF Operating temperature(oC/oF) -35oC to 70oC / -31oF to 158oF Operating Humidity 5 – 95% Operating Humidity 5 – 95% Ø High Directivity Ø Good VSWR Ø High Power Ø Broadband 806 MHz to 2.2 Ghz Ø High Directivity Ø Good VSWR Ø High Power Ø Broadband 806 MHz to 2.2 Ghz Applications Applications Radiating Cable Networks Combiner Systems Testing Distributed Antenna Systems Radiating Cable Networks Combiner Systems Testing Distributed Antenna Systems Material Material Housing : Aluminum Inner conductor : Brass Housing : Aluminum Inner conductor : Brass DC capability DC capability DC transmission only between input and port O1. O2 is capacitive coupled. 14 (Directional Couplers) www.shyamtelecom.com LOW LOSS POWER TAPPER - 10dB All Specifications are subject to change without prior notice DC transmission only between input and port O1. O2 is capacitive coupled. All Specifications are subject to change without prior notice LOW-LOSS POWER TAPPERS LOW-LOSS POWER TAPPERS LOW-LOSS POWER TAPPERS LOW LOSS POWER TAPPER - 15dB www.shyamtelecom.com 15 (800 – 960 MHz) Product Description T he Unit are available to couple power/frequency at a pre-set coupling level with a coupling range 20 dB to 50 dB. (20/30/40/50 dB) (1710 – 1990 Mhz) Product Description T he Unit are available to couple power/frequency at a pre-set coupling level with a coupling range 20 dB to 50 dB. These Broad band couplers allow operation across the range from 800 MHz – 960 MHz making them particularly suitable for use in the distribution of multiple mobile operators signal. These Broad band couplers allow operation across the range from 1710 MHz – 1990 MHz making them particularly suitable for use in the distribution of multiple mobile operators signal. Specifications Specifications Type No. 1903 0040 900 Type No. 1913 0040 900 Frequency Range 800 – 960 MHz Frequency Range 1710 – 1990 MHz VSWR 1.2:1 Max VSWR 1.2:1 Max Impedance 50 Ohms Impedance 50 Ohms Insertion Loss < 0.1 dB Insertion Loss < 0.1 dB Termination [Port1–2] 7/16 (M) – 7/16 (F) Termination [Port1–2] 7/16 (M) – 7/16 (F) Termination [Coupled] N - Female Termination [Coupled] N - Female Power Rating 200 Watts Power Rating 200 Watts Dimension (mm/inch) 90x60x40 mm / 3.5”x2”x1.5” Dimension (mm/inch) 90x60x40 mm / 3.5”x2”x1.5” Weight (Kgs/lbs) 0.4 kgs/ 1 lbs Approx Weight (Kgs/lbs) 0.4 kgs/ 1 lbs Approx Coupling 20/30/40/50 dB Coupling 20/30/40/50 dB Operating temperature(oC/oF) -35oC to 70oC / -31oF to 158oF Operating temperature(oC/oF) -35oC to 70oC / -31oF to 158oF Operating Humidity 5 – 95% Operating Humidity 5 – 95% Ø High Directivity Ø Good VSWR Ø High Power Ø Broad Bandwidth Ø High Directivity Ø Good VSWR Ø High Power rating Ø Broad Bandwidth Applications Applications Coupler for Fiber optic and Frequency Translating Repeater In building wireless Networks Coupler for Fiber optic and Frequency Translating Repeater In building wireless Networks Material Material Housing : Aluminum Housing : Aluminum DC capability DC capability DC Transmission only between input and output Port 03 is capacitive coupled 16 DIRECTIONAL COUPLER (20/30/40/50 dB) www.shyamtelecom.com DIRECTIONAL COUPLER (20/30/40/50 dB) All Specifications are subject to change without prior notice DC Transmission only between input and output Port 03 is capacitive coupled All Specifications are subject to change without prior notice DIRECTIONAL COUPLER DIRECTIONAL COUPLER DIRECTIONAL COUPLER DIRECTIONAL COUPLER (20/30/40/50 dB) www.shyamtelecom.com 17 (20/30/40/50 dB) (1920 – 2170 Mhz) Product Description T he Unit are available to couple power/frequency at a pre-set coupling level with a coupling range20 dB to 50 dB. These Broad band couplers allow operation across the range from 1920 MHz – 2170 MHz making them particularly suitable for use in the distribution of multiple mobile operators signal. Specifications Type No. 1943 0030 900 Frequency Range 1920 – 2170 MHz VSWR 1.2:1 Max Impedance 50 Ohms Insertion Loss < 0.1 dB Termination [Port1–2] 7/16 (M) – 7/16 (F) Termination [Coupled] N - Female Power Rating 200 Watts Dimension (mm/inch) 90x60x40 mm / 3.5”x2”x1.5” Weight (Kgs/lbs) 0.4 kgs/ 1 lbs Approx Coupling 20/30/40/50 dB Operating temperature(oC/oF) -35oC to 70oC / -31oF to 158oF Operating Humidity 5 – 95% BAND PASS FILTER (890 - 960 Mhz) Product Description This Band – Pass Filter is designed to be used in the Tx & Rx path of GSM 900 MHz BTS. It is used : To reject the strong CDMA signal from CDMA BTS and to pass only 890 – 960 MHz (GSM) signal. So that the Receivers of BTS is not saturated by the CDMA BTS Down Link signal. To improve the input selectivity of PGSM 900 BTS receivers To increase the isolation between CDMA 800 and PGSM 900 antennas which are mounted closely on the same tower or which use the common antenna for CDMA 800 & GSM 900 MHz BTS co located. BAND PASS FILTER DIRECTIONAL COUPLER DIRECTIONAL COUPLER Filter characteristics: Broad pass band range with low insertion loss, high CDMA stop band attenuation, steepened filter curve through additional stop poles. Specifications Type No. 1903 0920 060 Pass Band 890 – 960 MHz Insertion Loss < 3.5 dB VSWR 1.2:1 Max Stop Band CDMA BTS Attenuation 889.0 MHz < 30 dB 890.0 MHz < 3.5 dB 915.0 MHz < 0.6 dB 960.0 MHz < 0.4 B Impedance 50 Ohms Total Power Rating 200 W Termination 7/16 DIN Female Ø High Directivity Ø Good VSWR Ø High Power rating Ø Broad Bandwidth Dimension (mm/inch) 228x164x68 mm / 9”x7”x3” Weight (Kgs/lbs) 3 Kgs / 7 lbs Approx Operating temperature(oC/oF) -35oC to 70oC / -31oF to 158oF Applications Operating Humidity 5 – 95% Coupler for Fiber optic and Frequency Translating Repeater In building wireless Networks Applications Site Sharing Interference Removal Multi Operator Combining Material Material Housing : Aluminum Housing : Aluminum, Silver Plated DC capability DC Transmission only between input and output Port 03 is capacitive coupled 18 www.shyamtelecom.com Mounting DIRECTIONAL COUPLER (20/30/40/50 dB) All Specifications are subject to change without prior notice M5 Screws Provided All Metal Parts are DC Grounded. All Specifications are subject to change without prior notice BAND PASS FILTER (890 - 960 Mhz) www.shyamtelecom.com 19 BAND PASS FILTER (896 - 915 Mhz) Product Description (890-915 Mhz) Product Description This Band – Pass Filter is designed to be used for 2nd & 3rd Operator of GSM 900 MHz. This Band – Pass Filter is designed to be used for GSM 900 MHz. It is used : To reject the strong CDMA signal from CDMA BTS and to pass only 896 – 915 MHz (GSM Uplink signal). So that the Receivers of BTS is not saturated by the CDMA BTS Down Link signal. To improve the input selectivity of GSM 900 BTS receivers To increase the isolation between CDMA 800 and GSM 900 antennas which are mounted closely on the same tower or which use the common antenna for CDMA 800 & GSM 900 MHz BTS co located. It is used : To reject the strong CDMA signal from CDMA BTS and to pass only 890 – 915 MHz (GSM Uplink signal). So that the Diversity Receiver of BTS is not saturated by the CDMA BTS Down Link signal. To improve the input selectivity of GSM 900 BTS receivers To increase the isolation between CDMA 800 and GSM 900 antennas which are mounted closely on the same tower or which use the common antenna for CDMA 800 & GSM 900 MHz BTS co located. Filter characteristics: Broad pass band range with low insertion loss, high CDMA stop band attenuation, steepened filter curve through additional stop poles. Filter characteristics: Broad pass band range with low insertion loss, high CDMA stop band attenuation, steepened filter curve through additional stop poles. Specifications Type No. 1903 0920 015 Specifications Type No. 1923 0920 000 Pass Band 896 – 915 MHz Pass Band 890 – 915 MHz Insertion Loss < 1.8 dB Insertion Loss < 4.5 dB VSWR 1.2:1 Max VSWR 1.2:1 Max Stop Band CDMA BTS Attenuation 890.0 MHz < 60 dB 891.0 MHz < 40 dB 896.0 MHz < 1.7 dB 900.0 MHz < 0.8 dB 915.0 MHz < 0.7 dB Stop Band CDMA BTS Attenuation 888.0 MHz < 60 dB 889.0 MHz < 30 dB 890.0 MHz < 4.5 dB 891.0 MHz < 1.8 dB 915.0 MHz < 0.4 dB Impedance 50 Ohms Impedance 50 Ohms Total Power Rating 50 W Total Power Rating 50 W Termination N Female Termination N Female Dimension (mm/inch) 230x70x30 mm / 9”x3”x1” Dimension (mm/inch) 230x70x30 mm / 9”x3”x1” Weight (Kgs/lbs) 1 Kgs / 2.2 lbs Approx Weight (Kgs/lbs) 1 Kgs / 2.2 lbs Approx Operating temperature(oC/oF) -35oC to 70oC / -31oF to 158oF Operating temperature(oC/oF) -35oC to 70oC / -31oF to 158oF Operating Humidity 5 – 95% Operating Humidity 5 – 95% Applications Applications Site Sharing Interference Removal Multi Operator Combining Site Sharing Interference Removal Multi Operator Combining Material Material Housing : Aluminum, Silver Housing : Aluminum, Silver Plated Mounting Mounting M5 Screws Provided All Metal Parts are DC Grounded. M5 Screws Provided All Metal Parts are DC Grounded. www.shyamtelecom.com BAND PASS FILTER 896-915 Mhz All Specifications are subject to change without prior notice All Specifications are subject to change without prior notice BAND PASS FILTER BAND PASS FILTER 20 BAND PASS FILTER BAND PASS FILTER 890-915 MHZ www.shyamtelecom.com 21 DIPLEXER DIPLEXER / CROSS BAND COUPLER DIPLEXER / CROSS BAND COUPLER DIPLEXER Product Description Product Description hese Diplexers are compact solution to allow the Co-siting of two different frequency bands on to one common output. Designed using high performance filters, these units provide excellent inter band isolation, low insertion loss and good intermodulation performance. By using this Diplexer, it is possible to reduce the feeder cable requirement by 50% hence reducing rigging and tower rental costs. T his GSM / DCS / UMTS Triplexers are compact solution to allow the co-siting of three different frequency bands on to one common output (Antenna). Designed using high performance Band Pass filters, this model provide excellent inter band isolation, low insertion loss and good Inter-modulation performance. By using this Triplexer, it is possible to reduce feeder cable requirement by 66% hence reducing rigging and tower rental costs, where applicable. Specifications Type No. 1903 0909 200 Specifications Type No. 1903 9100 000 CDMA / GSM Band DCS / PCS Band 824 – 960 MHz 1710 – 1990 MHz GSM Band 880 – 960 MHz DCS Band 1710 – 1880 MHz or VSWR Insertion Loss 1.3:1 Max < 0.5 dB UMTS Band VSWR Band Isolation > 80 dB Insertion Loss 1920 – 2170 MHz 1.3:1 Max < 0.4 dB Propagation Delay (? s) Total Power Rating <1 Band Isolation > 90 dB GSM / DCS > 60 dB UMTS / DCS Impedance 50 Ohms Propagation Delay (? s) <1 Input / Output Port 2/1 Pass Band Ripple (dB) < 0.1 Termination N-Female Total Power Rating 150 Watts Dimension (mm/inch) 243x95x92 mm / 10”x4”x4” Impedance 50 Ohms Weight (Kgs/lbs) 1.5 Kgs / 3 lbs Approx Input / Output Port 3/1 Operating temperature(oC/oF) -35oC to 70oC / -31oF to 158oF Termination N-Female/ 5 MA (Female) Operating Humidity 5 – 95% Dimension (mm) 233x58x61 mm Weight (Kgs) 1.16 Kgs Operating temperature(oC/oF) -35oC to 70oC / -31oF to 158oF Operating Humidity 5 – 95% T 250 Watts Ø High Isolation Ø Low Insertion Loss Ø Low Intermodulation Ø High Isolation Ø Low Insertion Loss Ø Low Intermodulation Applications Dual Band Cellular Networks Common Antenna Sharing In building Coverage Systems Applications Dual Band Cellular Networks Common Antenna Sharing In building Coverage Systems Material Material Housing : Aluminium, Clear Chromated Housing : Aluminium, Black, Clear Chromated Mounting M5 Screws Provided All Metal Parts are DC Grounded. 22 www.shyamtelecom.com Mounting DIPLEXER All Specifications are subject to change without prior notice M5 Screws Provided All Metal Parts are DC Grounded. All Specifications are subject to change without prior notice DIPLEXER www.shyamtelecom.com 23 DUMMY LOAD Product Description Product Description T hese Dummy Loads or Terminating load resistors has been designed to give an economic solution to the growing need for compact, rugged and simple termination suitable for bench & field use. The Co-axial loads utilize low noise chip resistor. The heat sinks are made of black finished aluminium for maximum thermal radiation with N-Type Connectors. his CDMA & GSM / DCS & PCS / ISM Triplexers are compact solution to allow the co-siting of three different frequency bands on to one common output (Antenna). Designed using high performance Band Pass filters, this model provide excellent inter band isolation, low insertion loss and good Inter-modulation performance. By using this Triplexer, it is possible to reduce feeder cable requirement by 66% hence reducing rigging and tower rental costs, where applicable. Specifications Type No. 1903 0990 000 CDMA / GSM Band 824 – 960 MHz DCS / PCS Band 1710 – 1990 MHz ISM Band VSWR 2400 – 2500 MHz Insertion Loss Band Isolation < 0.4 dB Propagation Delay (? s) <1 Pass Band Ripple (dB) < 0.1 Total Power Rating 150 Watts Impedance 50 Ohms Dimension (mm/inch) 180x70x60mm / 7”x3”x3” Input / Output Port 3/1 Termination N-Female Dimension (mm/inch) 227x122x97 mm / 9”x5”x4” Weight (Kgs/lbs) 2.5 Kgs / 6 lbs Approx Operating temperature(oC/oF) -35oC to 70oC / -31oF to 158oF Operating Humidity 5 – 95% 1.3:1 Max > 90 dB CDMA&GSM / DCS&PCS > 60 dB ISM / DCS&PCS (2 W ) T Specifications Type No. 1156 0002 000 Frequency Range 800 – 2500 MHz VSWR Impedance 1.2:1 Max 50 Ohms Termination Total Power Rating N – Male 2 Watts Dimension (mm/inch) 70 x 30 mm / 3”x1.5” Weight (Kgs/lbs) DUMMY LOAD TRIPLEXER TRIPLEXER 0.2 Kgs / 0.5 lbs Approx o o Operating temperature( C/ F) -35oC to 70oC / -31oF to 158oF Operating Humidity 5 – 95% Ø Broad Bandwidth Ø Good VSWR Ø Up to 10 W Power Rating Ø High Isolation Ø Low Insertion Loss & Good Return Loss Ø Low Intermodulation Applications Transmitter/Combiner Output Termination Co-axial Line Terminations Circular Port Terminations Applications Dual Band Cellular Networks Common Antenna Sharing In building Coverage Systems Material Housing : Aluminium Finish : Black Material Housing : Aluminum, Black, Clear Chromated Mounting M5 Screws Provided All Metal Parts are DC Grounded. 24 www.shyamtelecom.com TRIPLEXER All Specifications are subject to change without prior notice DUMMY LOAD 2 W) All Specifications are subject to change without prior notice www.shyamtelecom.com 25 DUMMY LOAD (10 W) Product Description Product Description hese Dummy Loads or Terminating load resistors has been designed to give an economic solution to the growing need for compact, rugged and simple termination suitable for bench & field use. The Co-axial loads utilize low noise chip resistor. The heat sinks are made of black finished aluminium for maximum thermal radiation with N-Type Connectors. T hese Dummy Loads or Terminating load resistors has been designed to give an economic solution to the growing need for compact, rugged and simple termination suitable for bench & field use. The Co-axial loads utilize low noise chip resistor. The heat sinks are made of black finished aluminium for maximum thermal radiation with N-Type Connectors. Specifications Type No. 1156 0011 000 Specifications Type No. 1156 0025 000 Frequency Range 800 – 2500 MHz Frequency Range 800 – 2500 MHz VSWR Impedance 1.2:1 Max VSWR 1.2:1 Max 50 Ohms Impedance 50 Ohms Termination Total Power Rating N – Male 10 Watts Termination Total Power Rating N – Male 25 Watts Dimension (mm/inch) 70 x 30 mm / 3”x2” Dimension (mm/inch) 70 x 101 mm Weight (Kgs/lbs) 0.3 Kgs / 0.6 lbs Approx Weight (Kgs/lbs) o o o o T 0.425 Kgs o o Operating temperature( C/ F) -35 C to 70 C / -31oF to 158oF Operating temperature( C/ F) -35oC to 70oC / -31oF to 158oF Operating Humidity 5 – 95% Operating Humidity 5 – 95% Ø Broad Bandwidth Ø Good VSWR Ø Up to 10 W Power Rating Ø Broad Bandwidth Ø Good VSWR Ø Up to 50 W Power Rating Applications Applications Transmitter/Combiner Output Termination Co-axial Line Terminations Circular Port Terminations Transmitter/Combiner Output Termination Co-axial Line Terminations Circular Port Terminations Material Material Housing : Aluminium Finish : Black Housing : Aluminium Finish : Black DUMMY LOAD 10 W) 26 (25 W) www.shyamtelecom.com All Specifications are subject to change without prior notice DUMMY LOAD DUMMY LOAD DUMMY LOAD DUMMY LOAD All Specifications are subject to change without prior notice (25 W ) www.shyamtelecom.com 27 DUMMY LOAD (50 W) Product Description Product Description hese Dummy Loads or Terminating load resistors has been designed to give an economic solution to the growing need for compact, rugged and simple termination suitable for bench & field use. The Co-axial loads utilize low noise chip resistor. The heat sinks are made of black finished aluminium for maximum thermal radiation with N-Type Connectors. T hese Dummy Loads or Terminating load resistors has been designed to give an economic solution to the growing need for compact, rugged and simple termination suitable for bench & field use. The Co-axial loads utilize low noise chip resistor. The heat sinks are made of black finished aluminium for maximum thermal radiation with N-Type Connectors. Specifications Type No. 1156 0051 000 Specifications Type No. 1156 0100 000 Frequency Range 800 – 2500 MHz Frequency Range 800 – 2500 MHz VSWR 1.2:1 Max VSWR 1.2:1 Max Impedance 50 Ohms Impedance 50 Ohms Termination Total Power Rating N – Male 50 Watts Termination Total Power Rating N – Male 50 Watts Dimension (mm/inch) 70 x 125 mm / 2.7”x4.9” Dimension (mm/inch) 70 x 125 mm / 2.7”x4.9” Weight (Kgs/lbs) 0.55 Kgs / 1.1 lbs Approx Weight (Kgs/lbs) o o o T 0.55 Kgs / 1.1 lbs Approx o o o Operating temperature( C/ F) -35 C to 70 C / -31oF to 158oF Operating temperature( C/ F) -35oC to 70oC / -31oF to 158oF Operating Humidity 5 – 95% Operating Humidity 5 – 95% Ø Broad Bandwidth Ø Good VSWR Ø Up to 50 W Power Rating Ø Broad Bandwidth Ø Good VSWR Ø Up to 50 W Power Rating Applications Applications Transmitter/Combiner Output Termination Co-axial Line Terminations Circular Port Terminations Transmitter/Combiner Output Termination Co-axial Line Terminations Circular Port Terminations Material Material Housing : Aluminium Finish : Black Housing : Aluminium Finish : Black DUMMY LOAD 28 (100 W) www.shyamtelecom.com DUMMY LOAD (50 W) All Specifications are subject to change without prior notice DUMMY LOAD DUMMY LOAD DUMMY LOAD All Specifications are subject to change without prior notice (100 W) www.shyamtelecom.com 29 ATTENUATOR (3 dB) (100 W) (100 W) Product Description Product Description These Attenuators has been designed to give an economic solution to the growing need for compact, rugged and simple attenuation suitable for bench & field use. These attenuators use chip resistors for attenuation. The heat sinks are made of black finished aluminium for maximum thermal radiation with N-Type connectors. These Attenuators has been designed to give an economic solution to the growing need for compact, rugged and simple attenuation suitable for bench & field use. These attenuators use chip resistors for attenuation. The heat sinks are made of black finished aluminium for maximum thermal radiation with N-Type connectors. Specifications Specifications Type No. 1157 0003 000 Type No. 1157 0006 000 Frequency Range DC 2500 MHz Frequency Range DC 2500 MHz Attenuation 3 dB Attenuation 6 dB VSWR 1.2:1 Max VSWR 1.2:1 Max Impedance 50 Ohms Impedance 50 Ohms Termination N(M) – N(F) Termination N(M) – N(F) Total Power Rating 100 Watts Total Power Rating 100 Watts Dimension (mm/inch) 70 x 160 mm / 2.7”x 6” Dimension (mm/inch) 70 x 160 mm / 2.7”x 6” Weight (Kgs/lbs) 0.75 Kgs / 1.3 lbs Approx Weight (Kgs/lbs) 0.75 Kgs / 1.3 lbs Approx Operating temperature(oC/oF) -35oC to 70oC / -31oF to 158oF Operating temperature(oC/oF) -35oC to 70oC / -31oF to 158oF Operating Humidity 5 – 95% Operating Humidity 5 – 95% Ø Broad Bandwidth Ø Good VSWR Ø Up to 100 W Power Rating Ø Broad Bandwidth Ø Good VSWR Ø Up to 100 W Power Rating Applications Applications Equipment Protection Transmitter/combiner power level adjustment Equipment Protection Transmitter/combiner power level adjustment Material Material Housing : Aluminium Finish : Black Housing : Aluminium Finish : Black ATTENUATOR (100 W) 30 (6 dB) www.shyamtelecom.com All Specifications are subject to change without prior notice ATTENUATOR ATTENUATOR ATTENUATOR ATTENUATOR (100 W) All Specifications are subject to change without prior notice www.shyamtelecom.com 31 ATTENUATOR (10 dB) (100 W) (100 W) Product Description Product Description These Attenuators has been designed to give an economic solution to the growing need for compact, rugged and simple attenuation suitable for bench & field use. These attenuators use chip resistors for attenuation. The heat sinks are made of black finished aluminium for maximum thermal radiation with N-Type connectors. These Attenuators has been designed to give an economic solution to the growing need for compact, rugged and simple attenuation suitable for bench & field use. These attenuators use chip resistors for attenuation. The heat sinks are made of black finished aluminium for maximum thermal radiation with N-Type connectors. Specifications Specifications Type No. 1157 0010 000 Type No. 1157 0020 000 Frequency Range DC 2500 MHz Frequency Range DC 2500 MHz Attenuation 10 dB Attenuation 20 dB VSWR 1.2:1 Max VSWR 1.2:1 Max Impedance 50 Ohms Impedance 50 Ohms Termination N(M) – N(F) Termination N(M) – N(F) Total Power Rating 100 Watts Total Power Rating 100 Watts Dimension (mm/inch) 70 x 160 mm / 2.7”x 6” Dimension (mm/inch) 70 x 160 mm / 2.7”x 6” Weight (Kgs/lbs) 0.75 Kgs / 1.3 lbs Approx Weight (Kgs/lbs) 0.75 Kgs / 1.3 lbs Approx Operating temperature(oC/oF) -35oC to 70oC / -31oF to 158oF 5 – 95% Operating temperature(oC/oF) -35oC to 70oC / -31oF to 158oF 5 – 95% Operating Humidity Operating Humidity Ø Broad Bandwidth Ø Good VSWR Ø Up to 100 W Power Rating Ø Broad Bandwidth Ø Good VSWR Ø Up to 100 W Power Rating Applications Applications Equipment Protection Transmitter/combiner power level adjustment Equipment Protection Transmitter/combiner power level adjustment Material Material Housing : Aluminium Finish : Black Housing : Aluminium Finish : Black ATTENUATOR (100 W) 30 32 (20 dB) www.shyamtelecom.com All Specifications are subject to change without prior notice ATTENUATOR ATTENUATOR ATTENUATOR ATTENUATOR (100 W) All Specifications are subject to change without prior notice www.shyamtelecom.com 33 MULTI BAND OMNI CEILING ANTENNA (30 dB) (100 W) [Cable Type] (800 – 2500 MHz) Product Description Product Description Multi Band Omni Ceiling Antenna [ Cable ] These Attenuators has been designed to give an economic solution to the growing need for compact, rugged and simple attenuation suitable for bench & field use. These attenuators use chip resistors for attenuation. The heat sinks are made of black finished aluminium for maximum thermal radiation with N-Type connectors. Ceiling mounted omni antennas for CDMA 800, GSM 900, DCS, PCS, UMTS and WiFi bands are now available especially for micro-cell and In-building applications. This antenna can be operated in all frequency ranges simultaneously & needs no additional ground plane. Specifications Type No. 1157 0030 000 Frequency Range DC 2500 Mhz Attenuation 30 dB VSWR 1.2:1 Max Impedance 50 Ohms Termination N(M) – N(F) Total Power Rating 100 Watts Dimension (mm/inch) 70 x 160 mm / 2.7”x 6” Weight (Kgs/lbs) 0.75 Kgs / 1.3 lbs Approx Operating temperature(oC/oF) -35oC to 70oC / -31oF to 158oF 5 – 95% Operating Humidity Specifications Type No. 1171 2000 000 Frequency Range 800 – 960 / 1710 – 2500 Gain 2 dBi / 4 dBi 1710 – 2500 / 4 dBi VSWR Impedance 806 – 2500 MHz : < 1.4 Power Rating 50 Watts Termination 0.5 mtr Cable (N-Female) Polarization Vertical Phi = 90 150 180 -20 Vertical Beamwidth 90o Dimension H x D (mm/inch) 166x146.2 mm / 4”x8” -10 o 0 10 [dBi] 0 150 30 Phi = 270 120 0.210 Kgs 60 90 o -35 C to 70 C / -31oF to 158oF 5 – 95% Operating Humidity 30 o 360 Weight (Kgs / lbs) 60 120 Horizontal Beamwidth Operating temperature(oC/oF) Ø Broad Bandwidth Ø Good VSWR Ø Up to 100 W Power Rating 90 50 Ohms MULTI BAND OMNI CEILING ANTENNA ATTENUATOR ATTENUATOR Elevation Pattern Ø Wide Bandwidth Operation Ø Omni Directional Radiation Pattern Ø Easy to Install Applications Material Equipment Protection Transmitter/combiner power level adjustment Radiator Base Radome Colour Material Housing : Aluminium Finish : Black www.shyamtelecom.com Low Loss Circuit Board Aluminium ABS White Mounting ATTENUATOR (100 W) 34 : : : : All Specifications are subject to change without prior notice MULTI BAND OMNI CEILING ANTENNA Three holes in the base plate, enable mounting on the ceiling (Three screws are supplied). For N- Connector 35mm dia hole in the ceiling is required. For Installation Please Refer Page 45 - 46 All Specifications are subject to change without prior notice www.shyamtelecom.com 35 OUTDOOR DIRECTIONAL ANTENNA (800 - 2500 MHz) Product Description Indoor Directional Antenna Product Description for CDMA 800, iDEN, GSM 900 and GSM 1800 / PCS / UMTS for micro-cell and in-building applications. This antenna can be operated in all frequency ranges simultaneously and needs no additional ground plane. Directional Antenna for GSM, CDMA bands are now available to use as Repeater Outdoor and Indoor Antenna. This antenna can be operated through the frequency range simultaneously and needs no additional ground plane. 0 330 30 -6 0 330 -12 Specifications 300 1171 0400 000 Frequency Range (MHz) 800 – 960 & 1710 – 2500 Gain VSWR Impedance 8 dBi Max 2.0 : 1 Max -30 -36 270 120 210 N-Female 1 Mtr Cable Polarization Vertical 180 Azimuthal Pattern Horizontal Beamwidth 90 Vertical Beamwidth 65o Dimension (mm / inch) 220x160x50mm / 9”x6”x2” Weight (Kgs / lbs) 0.6 kgs / 1.5 lbs Approx 330 30 -6 -12 300 60 -18 -24 -30 -36 270 90 310x180x65mm / 12”x7”x2” o o Operating temperature( C/ F) -35oC to 70oC / -31oF to 158oF Operating Humidity 5 – 95% 120 240 210 Ø Wide Bandwidth Operation Ø Directional Radiation Pattern Ø Easy to Install Ø Additional Painting is Possible Type No. 1171 0500 900 Frequency Range 824 – 960 MHz Gain VSWR Impedance 7 dBi Max 1.8 Power Rating 50 Watts 300 60 -18 -24 -30 -36 270 90 120 240 50 Ohms Termination SMA(F) Polarization Vertical Horizontal Beamwidth 80o 70o 180 Elevation Pattern 210 150 180 Azimuthal Pattern 0 330 30 -6 -12 Vertical Beamwidth Front to Back Ratio Min 15 dB Dimension (mm / inch) 176x142x41mm / 7”x5”x2” Weight (Kgs / lbs) 0.5 Kgs / 1 lbs Approx Operating temperature(oC/oF) -35oC to 70oC / -31oF to 158oF Operating Humidity 5 – 95% 300 60 -18 -24 -30 -36 270 90 120 240 210 150 Material Radiator Radome Colour -12 0 o 30 -6 150 25 Watts Termination 90 240 50 Ohms Power Rating Specifications 60 -18 -24 Type No. Packing Size (mm/inch) Ø Wide Bandwidth Operation Ø Directional Radiation Pattern Ø Easy to Install 150 180 Elevation Pattern Material : : : Radiator Radome Colour Aluminium ABS White : : : Brass ASA Off White Mounting Mounting Mounting Plate : Stainless Steel Two holes of 6mm diameter in the mounting plate. Adjustable Wall Mounting & Tilting Kit Material : ASA INDOOR DIRECTIONAL ANTENNA 36 (824 - 960 MHz) OUTDOOR DIRECTIONAL ANTENNA PATCH PANEL DIRECTIONAL ANTENNA PATCH PANEL DIRECTIONAL ANTENNA www.shyamtelecom.com All Specifications are subject to change without prior notice OUTDOOR DIRECTIONAL ANTENNA For Installation Please Refer Page 45 - 46 All Specifications are subject to change without prior notice www.shyamtelecom.com 37 OUTDOOR DUAL BAND DIRECTIONAL ANTENNA (1710 – 2170 MHz) Product Description Product Description Directional Antenna for PCS, DCS & UMTS bands are now available to use as Repeater Outdoor and Indoor Antenna. This antenna can be operated through the frequency range simultaneously and needs no additional ground plane. Directional Antenna for GSM/CDMA bands & PCS, DCS, UMTS bands are now available to use as Repeater Outdoor and Indoor Antenna. This antenna can be operated through the frequency range simultaneously and needs no additional ground plane. 0 330 Specifications Specifications 30 -6 -12 Type No. 300 1171 0200 900 Frequency Range 1710 – 2170 MHz Gain VSWR Impedance 9 dBi Max 1.5 : 1 Max Power Rating 50 Watts 60 -18 -24 -30 -36 270 90 Termination SMA(F) Polarization Vertical Frequency Range 824 – 960 & 1710 – 2170 MHz Gain 824 – 960 / 7 dBi Max. 1710 – 2170 / 9dBi Max 824 – 960 / 1.8:1 Max 1710 – 2170 / 1.5:1 Max 210 Front to Back Ratio Min 15 dB Dimension (mm/inch) 330 o -6 Termination SMA(F) 300 -30 -36 270 -35oC to 70oC / -31oF to 158oF Operating Humidity 5 – 95% 330 60 300 -24 -30 -30 90 -36 270 120 240 120 150 210 180 Azimuthal Pattern 0 0 30 330 90 120 210 300 60 -18 -24 -30 -30 -36 270 90 -36 270 90 120 240 120 240 176x142x41mm / 7”x5”x2” 150 180 210 150 180 Elevation Pattern Elevation Pattern 0.5 Kgs / 1 lbs Approx o 240 60 -18 210 Weight (Kgs / lbs) 30 -6 -12 -24 80o 70o Vertical Beamwidth Dimension (mm / inch) 150 180 300 90 240 Azimuthal Pattern -6 60 -18 -24 -36 330 30 -6 -12 -18 270 Vertical Horizontal Beamwidth 60 -18 -24 Operating temperature( C/ F) Ø Wide Bandwidth Operation Ø Directional Radiation Pattern Ø Easy to Install 50 Watts Polarization 30 -12 300 0 30 -6 -12 -12 0.2 kgs / 0.5 lbs Approx o 330 50 Ohms Power Rating 1800 MHz 0 0 104x139x29 mm / 4”x6”x1” Weight (Kgs/lbs) 900 MHz 210 Azimuthal Pattern 65 60o Impedance 150 180 o Vertical Beamwidth o Operating temperature( C/ F) -35oC to 70oC / -31oF to 158oF Operating Humidity 5 – 95% 150 180 Elevation Pattern Material Radiator Radome Colour 1171 2004 000 VSWR 120 240 Type No. 50 Ohms Horizontal Beamwidth Ø Dual Band Operation Ø Directional Radiation Pattern Ø Easy to Install Material : : : Radiator Radome Colour Brass ASA Off White : : : Low Loss Circuit Board ASA Off White Mounting Mounting Adjustable Wall Mounting & Tilting Kit Material : ASA Adjustable Wall Mounting & Tilting Kit Material : ASA For Installation Please Refer Page 45 - 46 38 (824 – 960 & 1710 – 2170 MHz) DUAL BAND DIRECTIONAL ANTENNA OUTDOOR DIRECTIONAL ANTENNA OUTDOOR DIRECTIONAL ANTENNA www.shyamtelecom.com OUTDOOR DIRECTIONAL ANTENNA All Specifications are subject to change without prior notice For Installation Please Refer Page 45 - 46 All Specifications are subject to change without prior notice DUAL BAND DIRECTIONAL ANTENNA www.shyamtelecom.com 39 OUTDOOR YAGI ANTENNA (1800/10) (1710 – 2170 MHz) (806 – 960 MHz) Product Description Product Description Outdoor Yagi Antenna for DCS / PCS in 1710 - 2200 are now available for in-building applications to use as Outdoor Donor Antenna. Outdoor Yagi Antenna for CDMA / GSM in applications to use as Outdoor Donor Antenna. 806 - 960 are now available for in-building 0 340 320 Specifications 0 340 Specifications 320 Type No. 1171 0003 000 Frequency Range 1710 – 2170 MHz 280 Gain VSWR 10 dBi Max. 260 Impedance 50 Ohms 0 20 40 -10 300 120 45 Vertical Beamwidth 40 280 Dimension (mm/inch) 700x105x20mm / 27”x4”x1” 260 Weight (Kgs/lbs) 0.5 Kgs / 1 lbs Approx Wind Survival Rating 200 Km/H 12 dBi Max. VSWR 1.5 : 1 Max o Impedance 50 Ohms Total Power Rating 100 Watts 140 Azimuthal Pattern 0 Horizontal Beamwidth 45o 40 -10 320 0 20 40 -10 300 60 -20 -30 280 80 60 -20 160 180 Vertical -40 Vertical Beamwidth 40o Dimension (mm/inch) 1050x210x20 mm/ 41”x8”x1” Weight (Kgs/lbs) 1 kgs / 2 lbs Approx 260 100 80 -40 240 120 100 140 220 200 240 120 o Operating temperature(oC/oF) -35oC to 70oC / -31oF to 158oF Operating Humidity 5 – 95% Wind Survival Rating 200 Km/H 140 220 200 160 180 Elevation Pattern Material Material Aluminium : Colour : Mounting Clamp : Mech. Hardware Off White Stainless steel Mounting Fixtures for 20-40mm diameter pipe is provided. Fixtures for 20-40mm diameter pipe is provided. OUTDOOR YAGI ANTENNA All Specifications are subject to change without prior notice For Installation Please Refer Page 48 - 49 All Specifications are subject to change without prior notice 160 180 Elevation Pattern Mech. Hardware Off White Stainless steel Mounting www.shyamtelecom.com 120 220 Polarization 20 Ø Narrow Beamwidth Ø Minimum VSWR Performance Ø Easy to Install Ø Outdoor Donor Applications For Installation Please Refer Page 48 - 49 240 0 0 Ø Narrow Beamwidth Ø Minimum VSWR Performance Ø Easy to Install Ø Outdoor Donor Applications Aluminium : Colour : Mounting Clamp : 100 340 -30 -35 C to 70 C / -31 F to 158 F 5 – 95% Gain 0.6 Mtr Cable with N(F) Connector o Operating Humidity 80 260 Termination 300 o 806 – 960 MHz Azimuthal Pattern 320 o o 160 180 Vertical Operating temperature(oC/oF) Frequency Range 140 220 340 Horizontal Beamwidth -30 280 100 240 0.6 Mtr Cable with N(F) Connector Polarization 60 -20 200 100 Watts Termination 40 80 -40 Power Rating 1171 0002 090 20 -40 -30 1.5 : 1 Max 300 Type No. 0 -10 60 -20 200 40 (900/12) OUTDOOR YAGI ANTENNA OUTDOOR YAGI ANTENNA OUTDOOR YAGI ANTENNA OUTDOOR YAGI ANTENNA www.shyamtelecom.com 41 QUAD BAND YAGI ANTENNA [DUAL BAND] (900 & 1800 MHz) (800 & 2500 MHz) Product Description Product Description Outdoor Dual Band Yagi Antenna for GSM 900 & DCS 1800 are now available for in-building applications to use as Outdoor Donor Antenna. Outdoor Quad Band Yagi Antenna for IDEN/ GSM/ DCS /PCS/ UMTS & Wifi band is now available for in-building applications to use as Outdoor Donor Antenna. 0 340 Specifications 320 20 60 -20 1171 2003 000 Specifications 40 -10 300 Type No. 0 -30 280 Frequency Range 890 – 960 / 1710 – 1880 MHz -40 260 890 – 960 / 7 dBi Max. 1710 – 1880 / 9dBi Max. Gain 2.0 : 1 Max Impedance 50 Ohms Total Power Rating 100 Watts 240 140 200 160 180 Azimuthal Pattern 0 20 60 -20 Vertical -30 280 80 o 45 -40 260 o Vertical Beamwidth 40 Dimension (mm/inch) 1050x210x20 mm/ 41”x8”x1” 100 240 1 kgs / 2 lbs Approx o o 8.5 dBi / 11dBi Max. VSWR <1.5 Impedance 50 Ohms Total Power Rating 100 Watts Termination N(Female) Polarization Vertical Horizontal Beamwidth 55o Vertical Beamwidth 45o Dimension (mm/inch) 480 x 330 x 90mm Weight (Kgs/lbs) 1.55 kgs Operating temperature(oC ) -35oC to 70oC Operating Humidity 5 – 95% Wind Survival Rating 150 Km/H 120 140 220 Weight (Kgs/lbs) Gain 40 -10 300 Horizontal Beamwidth 800 – 2500 MHz 0 340 0.6 Mtr Cable with N(F) Connector Polarization Frequency Range 120 320 Termination 1171 2009 000 100 220 VSWR Type No. 80 Operating temperature( C/ F) -35oC to 70oC / -31oF to 158oF Operating Humidity 5 – 100% Wind Survival Rating 200 Km/H 200 160 180 Elevation Pattern Ø Narrow Beamwidth Ø Minimum VSWR Performance Ø Easy to Install Ø Outdoor Donor Applications Ø Narrow Beamwidth Ø Minimum VSWR Performance Ø Easy to Install Ø Outdoor Donor Applications Material Material Aluminium : Colour : Mounting Clamp : Radiating Element Aluminium Colour Mounting Clamp Mech. Hardware Off White Stainless steel : : : : Aluminium Mech. Hardware Off White Stainless steel Mounting Mounting Fixtures for 20-40mm diameter pipe is provided. Fixtures for 20-40mm diameter pipe is provided. OUTDOOR YAGI ANTENNA DUAL BAND 42 www.shyamtelecom.com QUAD BAND YAGI ANTENNA OUTDOOR YAGI ANTENNA OUTDOOR YAGI ANTENNA All Specifications are subject to change without prior notice QUAD BAND YAGI ANTENNA All Specifications are subject to change without prior notice www.shyamtelecom.com 43 ANTENNA INSTALLATION OUTDOOR REPEATER SERVER ANTENNA OUTDOOR REPEATER SERVER ANTENNA (806 – 960 Mhz) Yagi Antenna Product Description Outdoor Directional Antennas feature advanced array design techniques; assuring consistent & repeatable RF performance. These antennas can be used as Outdoor Repeater server antennas for Cellular Networks. U - Bolt Nut 0 0 330 Specifications 30 -8 -16 Type No. 1171 1000 900 Frequency Range 806 – 960 MHz Gain 16 dBi Max. VSWR 1.5 : 1 Max Impedance 50 Ohms 300 60 -24 -32 Yagi Antenna -40 270 90 Installation-Pole Mountable Antennas 120 240 210 150 180 Total Power Rating 500 Watts Termination N(F) Connector Azimuthal Pattern 0 Polarization 0 330 Vertical -16 300 Repeater Server Antenna 60 -24 65o Horizontal Beamwidth 30 -8 -32 o Vertical Beamwidth Front to Back Ratio 15 Dimension (mm/inch) 1219x254x216mm / 48”x10”x9” Weight (Kgs/lbs) 5.5 kgs / 12 lbs Approx Operating temperature(oC/oF) -35oC to 70oC / -31oF to 158oF Operating Humidity 5 – 100% Wind Survival Rating 200 Km/H Mechanical Down tilt Kit -40 270 90 40 dB 120 240 Bolt Nut 210 150 180 Elevation Pattern Repeater Server Antenna Installation-Pole Mountable Antennas Ø High Front to Back Ratio Ø Minimum VSWR Performance Ø Excellent Upper Side Lobe Suppression Ø Outdoor Repeater Server Applications Ø All Metals Parts are DC Grounded Material Radiator Radome Colour Patch Panel Antenna : : : Aluminium ASA UV Resistant Light Grey Elevation Tilting Kit Pole Mounting Kit Bolt Mounting Mechanically Tiltable, Aluminium Installation-Pole / Wall Mountable Antennas For Installation Please Refer Page 48 - 49 44 www.shyamtelecom.com Multi Band Omni Ceiling Antenna OUTDOOR REPEATER SERVER ANTENNA All Specifications are subject to change without prior notice All Specifications are subject to change without prior notice www.shyamtelecom.com 45 SPLITTER / COMBINERS Directional Patch Antenna 900 DUMMY LOADS 2 Way Splitter [800 – 2500 Mhz] 1173 0001 102 Dummy Load 2 W 1156 0002 000 3 Way Splitter [800 – 2500 Mhz] 1173 0001 103 Dummy Load 10 W 1156 0011 000 4 Way Splitter [800 – 2500 Mhz] 1173 0001 104 Dummy Load 25 W 1156 0025 000 Dummy Load 50 W 1156 0051 000 Dummy Load 100 W 1156 0100 000 Plastic plug MULTICASTING MATRIX Mounting & Tilting Kit Self thread screws Directional Patch Antenna 900 Installation-Wall Mountable Antennas 2 way multicasting matrix 900 1164 0000 102 2 way multicasting matrix 1800 1164 0001 102 ATTENUATOR 2 way multicasting matrix (800 - 2500) 1164 0011 102 4 way multicasting matrix (800 - 2500) 1164 0011 104 4 way multicasting matrix 900 1164 0000 104 4 way multicasting matrix 1800 1164 0011 104 Attenuator 3 dB Attenuator 6 dB Attenuator 10 dB Attenuator 20 dB Attenuator 30 dB 1157 0003 000 1157 0006 000 1157 0010 000 1157 0020 000 1157 0030 000 PART NO REFERENCE ANTENNA INSTALLATION PART NO REFERENCE DIRECTIONAL COUPLERS Directional Patch Antenna 1800 Low Loss Power Tappers, 760-2500 MHz, 5 dB Coupling 1173 0001 105 INDOOR ANTENNAS Low Loss Power Tappers, 760-2500 MHz, 7 dB Coupling 1173 0001 107 Low Loss Power Tappers, 806-2500 MHz, 10 dB Coupling 1173 0001 110 Multi Band Omni Ceiling [806-2.5G] Cable Patch Panel directional Dual Band Antenna (800 - 2500 MHz) Low Loss Power Tappers, 806-2500 MHz, 15 dB Coupling 1173 0001 115 1171 2000 000 1171 0400 000 OUTDOOR ANTENNAS Plastic plug Mounting & Tilting Kit Self thread screws Outdoor Directional Antenna 900, 7dBi DIRECTIONAL COUPLERS Directional Patch Antenna 1800 Installation-Wall Mountable Antennas 1171 0500 900 [For Optical & Frequency Converter Repeaters] Outdoor Directional Antenna 1800, 9 dBi 1171 0200 900 Directional Coupler, 806-960 MHz – 20/30/40/50 dB 1903 0040 900 Outdoor DB Directional Antenna Outdoor Yagi Antenna 900 1171 2004 000 1171 0002 090 Directional Coupler, 1710-1990MHz – 20/30/40/50 dB 1913 0040 900 Outdoor Yagi Antenna 1800 1171 0003 000 Outdoor Yagi Antenna Dual Band 1171 2003 000 Directional Coupler, 1920-2170MHz – 20/30/40/50 dB 1943 0030 900 Outdoor Repeater Server Antenna, 16dBi 1171 1000 900 Quad Band Yagi Antenna 8.5/ 11 dBi 1171 2009 000 FILTERS Band Pass Filter 890-960 Mhz 1903 0920 060 Band Pass Filter 2nd Operator GSM 896-915 Mhz 1903 0920 015 Band Pass Filter 890-915 Mhz 1923 0920 000 DIPLEXERS Diplexer [824-960 & 1710-1990] 1903 0909 000 Diplexer [880-960 MHZ,1710 - 1880 or 1920 - 2170 Mhz ] 1903 9100 000 TRIPLEXERS Triplexer 824-960,1710-1990,2400-2500 46 www.shyamtelecom.com All Specifications are subject to change without prior notice All Specifications are subject to change without prior notice 1903 0990 000 www.shyamtelecom.com 47 VSWR Return Loss 1.00 1.01 1.02 1.03 1.04 1.05 1.06 1.07 1.08 1.09 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19 1.20 1.21 1.22 1.23 1.24 1.25 1.26 1.27 1.28 1.29 1.30 1.31 1.32 1.33 1.34 1.35 1.36 1.37 1.38 1.39 1.40 1.41 1.42 1.43 1.44 1.45 1.46 1.47 1.48 1.49 1.50 00 46.06 40.09 36.61 34.15 32.26 30.71 29.42 28.30 27.32 26.44 25.66 24.94 24.29 23.69 23.13 22.61 22.12 21.66 21.23 20.83 20.44 20.08 19.73 19.40 19.08 18.78 18.49 18.22 17.95 17.69 17.45 17.21 16.98 16.75 16.54 16.33 16.13 15.94 15.75 15.56 15.38 15.21 15.04 14.88 14.72 14.56 14.41 14.26 14.12 13.98 Reflection Transmitted Coefficient Power Ratio 0.0000 0.0050 0.0099 0.0148 0.0196 0.0244 0.0291 0.0338 0.0385 0.0431 0.0476 0.0521 0.0566 0.0610 0.0654 0.0698 0.0741 0.0783 0.0826 0.0868 0.0909 0.0950 0.0991 0.1031 0.1071 0.1111 0.1150 0.1189 0.1228 0.1266 0.1304 0.1342 0.1379 0.1416 0.1453 0.1489 0.1525 0.1561 0.1597 0.1632 0.1667 0.1701 0.1736 0.1770 0.1803 0.1837 0.1870 0.1903 0.1935 0.1968 0.2000 1.00000 0.99998 0.99990 0.99978 0.99962 0.99941 0.99915 0.99886 0.99852 0.99815 0.99773 0.99728 0.99680 0.99628 0.99572 0.99513 0.99451 0.99386 0.99318 0.99247 0.99174 0.99097 0.99018 0.98936 0.98852 0.98765 0.98676 0.98585 0.98492 0.98396 0.98299 0.98199 0.98098 0.97994 0.97889 0.97782 0.97673 0.97563 0.97451 0.97337 0.97222 0.97106 0.96988 0.96869 0.96748 0.96626 0.96503 0.96379 0.96254 0.96127 0.96000 GLOSSARY VSWR Return Loss 1.55 1.60 1.65 1.70 1.75 1.80 1.85 1.90 1.95 2.00 2.05 2.10 2.15 2.20 2.25 2.30 2.35 2.40 2.45 2.50 2.55 2.60 2.65 2.70 2.75 2.80 2.85 2.90 2.95 3.00 3.05 3.10 3.15 3.20 3.25 3.30 3.35 3.40 3.45 3.50 3.55 3.60 3.65 3.70 3.75 3.80 3.85 3.90 3.95 4.00 4.05 13.32 12.74 12.21 11.73 11.29 10.88 10.51 10.16 9.84 9.54 9.26 9.00 8.75 8.52 8.30 8.09 7.89 7.71 7.53 7.36 7.20 7.04 6.90 6.76 6.62 6.49 6.37 6.25 6.13 6.02 5.91 5.81 5.71 5.62 5.52 5.43 5.35 5.26 5.18 5.11 5.03 4.96 4.88 4.81 4.75 4.68 4.62 4.56 4.50 4.44 4.38 Reflection Transmitted Coefficient Power Ratio 0.2157 0.2308 0.2453 0.2593 0.2727 0.2857 0.2982 0.3103 0.3220 0.3333 0.3443 0.3548 0.3651 0.3750 0.3846 0.3939 0.4030 0.4118 0.4203 0.4286 0.4366 0.4444 0.4521 0.4595 0.4667 0.4737 0.4805 0.4872 0.4937 0.5000 0.5062 0.5122 0.5181 0.5238 0.5294 0.5349 0.5402 0.5455 0.5506 0.5556 0.5604 0.5652 0.5699 0.5745 0.5789 0.5833 0.5876 0.5918 0.5960 0.6000 0.6040 0.95348 0.94675 0.93984 0.93278 0.92562 0.91837 0.91105 0.90369 0.89629 0.88889 0.88148 0.87409 0.86672 0.85938 0.85207 0.84481 0.83760 0.83045 0.82338 0.81633 0.80936 0.80247 0.79565 0.78890 0.78222 0.77562 0.76910 0.76266 0.75629 0.75000 0.74379 0.73766 0.73160 0.72562 0.71972 0.71390 0.70815 0.70248 0.69688 0.69136 0.68591 0.68053 0.67522 0.66999 0.66482 0.65972 0.65469 0.64973 0.64483 0.64000 0.63523 Antenna FBR A passive component which converts wired electrical energy to wireless radio waves and directs them through the air in some pattern. Front to back Ratio, The difference (in dB) between power radiated in the boresight of the antenna to that radiated 180 degree behind boresight. Antenna Array Gain An antenna comprising a number of radiating elements, which are arranged and excited to obtain directional radiation pattern. In a given direction, the ratio of radiation intensity in that direction to the net power accepted by the antenna from the connected transmitter. Axial Ratio GSM A measure of circularity of polarization, related to a Cross polar antenna’s XPD. Global System for Mobile Communications; the digital transmission technique widely adopted in Europe and supported in North America for PCS, GSM uses 900 MHz and 1800 MHz in Europe. In North America, GSM uses the 1900 Mhz. Bandwidth The range of frequencies within which the performance of the antenna, with respect to some characteristic, conforms to a specified standard. Beamwidth The acceptance angle of an antenna, usually measured between half power(3dB) points. GLOSSARY VSWR CONVERSION CHART VSWR CONVERSION CHART Impedance A unit of measure , expressed in Ohms, of the total opposition (resistance, capacitance and inductance) offered to the flow of an alternating current. Isotropic BPF A hypothetical antenna having equal radiation intensity in all direction. Band Pass Filter CDMA Code Division Multiple Access, is one of several digital wireless transmission methods in which signals are encoded using a pseudo random sequence that corresponds to a different communication channel. Polarization In a given direction, the polarization of a plane wave incident from the given direction which results in maximum available power at the antenna terminals. SAR DB Decibels; A means of expressing voltage, power, gain, loss or frequency in logarithmic form against a reference, Typical reference includes volts, watts or Hz. dB = 10 log (x/y) DBi A ratio of decibels to an isotropic antenna that is commonly used to measure antenna gain. DBm dB Power relative to one milliwatt Dipole A type of low gain antenna consisting of two elements Specific Absorption Rate: the amount of radiation absorbed by the human body (SAR for the entire body) or by the head (local SAR). VSWR Voltage Standing Wave Ratio, A comparison of power accepted to the power reflected back from the system, generally with respect to a 50 Ohms line impedance. A VSWR of 1.0 is 100% of power accepted by the antenna, a VSWR of 1.5 is 97%, a VSWR of 2.o is 89%. Wavelength The ratio of the velocity of the wave to the frequency of the current causing the wave. Directional Antenna WiFi An antenna having the property of radiating or receiving electromagnetic waves more effectively in some directions than others. Short for wireless fidelity and is meant to be used generically hen referring of any type of 802.11b, 802.11a, dual band, etc. The term is promulgated by the WiFi Alliance. EIRP Effective Isotropic Radiated Power 48 www.shyamtelecom.com All Specifications are subject to change without prior notice 52 49
