TESA UNITEST Internal Micrometer
Transcription
TESA UNITEST Internal Micrometer
M EASURING I NSTRUM ENTS FOR LARGE D IM ENSIONS TESA UNITEST Internal Micrometer 3 Measures internal dimensions in the micrometer’s axis with 2-point contact DIN 863 T4 with the workpiece to be checked – Optional accessories are available for (Style B) inspecting centring shoulders and blind bores as well as auxiliary means for external measuring. Measuring element Extensions with built-in gauge rods can be mounted on the measuring Micrometer and dial gauge element, thus allowing any dimension within the application range to be to 0,01 mm measured, directly. Micrometer: Precise, easy-to-handle micrometer – Horizontal or vertical position 0,1 mm of use – Constant measuring force – Integrated dial gauge to show you the culmination point. Micrometer: 25 mm 0,5 mm Dial gauge: ± 0,22 mm 0,7 to 1 N 8 µm Measuring bolts Spherical end for measuring in the micrometer axis. All inserts are interchangeable. Tungsten carbide tipped Extensions 26 mm dia. steel tube with snap-ring system. Also with built-in gauge rods. in mm TESA UNITEST complete set Tungsten One spherical in mm carbide tipped 01110700 Intern. dimen. 01120700 8 ÷ 56 200 ÷ 1400 and one flat measuring faces Consisting of: Additional data Wooden case mm mm 01110901 Measuring element for inter. dimen. 01141001 Setting standard for internal/external dimensions 01110801 Extension 25 Declaration of 01110802 Extension 50 conformity 01110804 Extension 01110808 Setting standard with identification number in µm 01120901 8÷9 01151001 8 0,7 01120801 1 1 01120802 2 100 1,5 01120804 4 Extension 200 2,5 01120808 8 01110812 Extension 300 3,5 01120812 12 01110820 Extension 500 5,5 01120820 20 01160901 Special screwdriver 01160901 01162302 Wooden case for complete set 01162302 200 ÷ 225 200 Optional Accessories 01141101 Extension 01160701 Pair of tungsten carbide tipped 1000 10 01151101 40 01160701 measuring bolts for blind bores 01162301 Measuring depth: 01140801 01162301 Auxiliary elements for external measurement Suspension device, complete Measuring depth: £ 10 £ 100 01150801 D-3 M EASURING I NSTRUM ENTS FOR L ARGE D IM ENSIONS TESA UNIMASTER Universal Measuring Instrument 3 DIN 863 T4 Provides the features necessary for direct measurement of specially large (Style B) internal and external dimensions. Messelement TESA UNIMASTER is similar to internal micrometers with two-point contact Micrometer and with the workpiece. Performs direct measurement of any dimension within the extended application range by simply adding the needed extensions with dial test indicator: 0,01 mm built-in gauge blocks to the measuring element. Micrometer: 25 mm Accurate, robust and easy-to-handle – Can be used either vertically or horizontally with a constant measuring force – Incorporates a lever-type 1 mm dial test indicator that clearly shows the culmination point – Ensures stable measuring owing to both negligible deflection and thermal protection on each extension. Dial test indicator: ± 0,4 mm 15 to 20 N. Mobile ball-bearing anvil under spring pressure. Reversible probing direction to allow both internal and external measuring 5 µm Measuring bolts Tungsten carbide tipped Measuring bolts supplied in pairs: • No. 01110203 for internal measuring in the micrometer axis. • No. 01110205 for internal/ external measuring, meas. depth up to 60 mm from the lower edge of the micrometer. • No. 01110208, extra-rigid for external measuring, meas. depth up to 75 mm from the lower edge of the micrometer Extensions 38 mm dia. diameter steel tube with snap ring system. Built-in gauge rod. Tungsten carbide tipped One spherical and one flat measuring faces D-4 M EASURING I NSTRUM ENTS FOR LARGE D IM ENSIONS in mm TESA UNIMASTER complete set in mm 01110000 Internal dim. 250 ÷ 1475* External dim. 225 ÷ 1450* 01120000 10 ÷ 59* 9 ÷ 58* Consisting of: mm Additional Data Wooden case Measuring element and setting standard 01110300 of conformity mm internal dim. 250 ÷ 275 external dim. 225 ÷ 250 01110203 Pair of measuring bolts for internal measuring 01110205 Pair of measuring bolts for internal/external in µm 01120300 10 ÷ 11 9 ÷ 10 01120203 01120205 measuring, with length to with identification number Declaration Measuring element 75 01110208 Pair of measuring bolts for extern. measuring, length 100 01120208 01110501 Setting standard internal dimension 250 01120501 external dimension 225 10 9 01110101 Extension 25 0,7 01120101 1 01110102 Extension 50 1 01120102 2 01110103 Extension 75 1,2 01120103 3 01110104 Extension 100 1,5 01120104 4 01110105 Extension 125 1,5 01120105 5 01110106 Extension 150 2 01120106 6 01110112 Extension 300 3,5 01120112 12 01110118 Extension 450 4,5 01120118 18 01110124 Extension 600 6,5 01120124 24 01130001 Special screwdriver for extensions 01130001 01110401 Set of suspension accessories 01110401 (4 brackets together with 4 clamps) 01112401 01112401 Wooden case for complete set Optional Accessories 01110140 Extension 01162001 Pair of measuring bolts for internal/external dimensions and grooves Measuring depth 1000 01120140 40 01162001 £ 20 Tungsten carbide inserts 01160001 10 Ø4x7 Support roller supplied individually (2 items are needed) 01160001 * Using 3 extensions at the very most 01110208 01110205 01110203 01162001 D-5 M EASURING I NSTRUM ENTS FOR L ARGE D IM ENSIONS TESA INOTEST 3 Comparative Measuring Instrument Measuring element Mobile Allows large internal and external dimensions to be measured by comparison. ball-bearing anvil, Consists of a measuring element with interchangeable inserts as well as a set of extensions. Since there is no material measure, the indication is set using a separate reference standard that can either be a gauge block, 10 mm measuring travel Watertight dial gauges 01470104 setting ring or horizontal measuring bench. and 01480100 Measuring inserts for inspection in tool axis, or offset inserts – Vertical 0,01 mm or or horizontal position of use – Integrated dial gauge to show the culmination point – Constant measuring force – Extensions with heat insulating grip. 0.0005 in 10 mm or 0.40 in Additional technical data, see section E 4 to 7 N. Reversible probing direction to allow both internal and external measuring Measuring bolts Tungsten carbide tipped Measuring bolts supplied in pairs: • No. 01131901 for internal measuring in the instrument axis • No. 01131902 for internal/ external measurement, measuring depth up to 30 mm from the lower edge of the tool Extensions 25 mm dia. steel tube. 19 mm dia. telescopic tube that can be clamped. Additional data Plastic case Dial gauge with serial number Dial gauge with inspection report Declaration of conformity D-6 M EASURING I NSTRUM ENTS FOR LARGE D IM ENSIONS in mm TESA INOTEST complete set in mm 01111900 Internal dimen. 275 ÷ 1025 External dimen. 250 ÷ 1010 01121900 11 ÷ 41 10 ÷ 40 Consisting of: mm in mm 01112301 Measuring element with dial gauge 01122301 01131901 Pair of measuring bolts for internal measuring 01131901 01131902 Pair of measuring bolts for internal/external 01131902 measuring with length to 60 01132001 4 resting rods Ø 7 x 40 00160101 3 insulating grips (order number for 1 item) 00160101 01112001 Extension 01122001 11 ÷ 13 01122002 13 ÷ 17 01122003 17 ÷ 25 01122004 25 ÷ 41 internal dimensions 275 ÷ 335 external dimensions 250 ÷ 310 internal dimensions 325 ÷ 435 external dimensions 300 ÷ 410 internal dimensions 425 ÷ 635 01112002 Extension 01112003 Extension 01112004 Extension 01162303 Plastic case for complete set external dimensions 400 ÷ 610 internal dimensions 625 ÷ 1035 external dimensions 600 ÷ 1010 01132001 10 ÷ 12 12 ÷ 16 16 ÷ 24 24 ÷ 40 01162303 Optional Accessories 01141901 01151901 Extension for extending the application range by 01141902 01151902 Extension for extending 01162001 Pair of tungsten carbide measuring bolts Ø4x7 for internal/external dimensions 01162002 01162002 Pair of tungsten carbide measuring bolts Ø4x7 for grooves 01161900 Measuring device for small - internal dimensions - external dimensions 40 1000 the application range by 01162001 20 500 01161900 1.4 ÷ 11 0.6 ÷ 10 35 ÷ 280 15 ÷ 255 01162001 01161900 01131901 D-7 M EASURING I NSTRUM ENTS FOR L ARGE D IM ENSIONS ETALON 532 Internal Micrometer This internal micrometer is designed for measurements with 2-point contact. Extensions with built-in gauge rods to increase the measuring range – Stiff screw coupling. 3 Factory standard Micrometer element 0,01 mm 15 mm Complete sets mm 072109101 072109107 072109108 072109117 072109128 50 ÷ 170 50 ÷ 290 50 ÷ 530 50 ÷ 1010 50 ÷ 1510 0,5 mm Spherical (R = 15 mm) Consisting of: Tungsten carbide tipped mm 072103576 mm µm Micrometer element 50 ÷ 65 3 072103585 Extension 15 4,5 072105462 Extension 30 4,5 072109030 Extension 60 5 072103586 Extension 120 5 072109055 Extension 240 6 072109066 Extension 480 6,5 072109089 Extension 500 6,5 Extensions • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Reference gauge rods 29 mm Tungsten carbide tipped Additional data Wooden or plastic case Declaration of conformity ROCH Periphery Tapes 3 Steel tapes with a dual graduation for measuring external circumferences and diameters of cylindrical parts on machines and other fittings – Suitable for malleable parts such as plastic tubing – Used for inspecting tanks or Factory standard boilers – Also designed for checking steel or concrete pipes, rims, tires etc. 0,1 mm See table Diameter Circumference mm mm 0951750222 20 ÷ 300 0951750223 300 ÷ 700 60 ÷ 16 x 0,2 mm mm 950 940 ÷ 2200 0,15 type section Steel band 0,20 0951750224 700 ÷ 1100 2190 ÷ 3460 0,20 0951750225 1100 ÷ 1500 3450 ÷ 4720 0,25 0951750226 1500 ÷ 1900 4710 ÷ 5980 0,30 0951750227 1900 ÷ 2300 5960 ÷ 7230 0,35 Shipping packaging Declaration of conformity D-8 M EASURING I NSTRUM ENTS FOR L ARGE D IM ENSIONS ETALON ZEDURAM Universal Instrument ETALON ZEDURAM Measuring Instrument – Electronic 3 The other way of measuring – Brings quality control into practice. LC display • Easy, reliable measuring – even in the toughest surrounding conditions. • Perfect for inspecting large internal and external diameters as well as radii, 1 mm, 0,1 mm, circumferences, heights and angles. 0,01 mm, 0,01° • Capable to compute the mean value of n single values. • Error-free reading of the numerical display. 10 x 6,5 mm (H x W) • Permanently ready-to-measure with battery power. • Infrared data transfer to the printer. Metric/inch conversion Versatility Internal/external diameters from • Measures metal, plastic or wood 350 up to 20 000 mm or pieces of work. 14 to 800 in • Checks forming processes, e.g. Radii on concave and convex surfaces from on metal sheets and tubes. • Inspects distortion during 175 up to 10 000 mm or 7 up to 400 in heights (drawing): bending and continuous rounding –120 to + 250 mm operations of metal sheets into cylinders or boiler bottoms and –4,75 to + 9,8 in Angles (drawing): the like. –50° to + 95° • Measures manufactured and Diameter sizes machined pattern parts (profiles) made from metal, plastic or wood. from 350 to 2000 mm: 0,05% 2000 to 5000 mm: 0,1% 5000 to 10 000 mm: 0,3% 10 000 to 20 000 mm: 0,6% Heights: 0,04 mm Angles: 0,03° Infrared data transfer (ZEDURAM 2020 only) 2 batteries Cylindrical Surface Measurement • Measures internal and external diameters from 350 up to 20 000 mm. • Measures radii on concave and convex surfaces from 175 up to 10 000 mm. • Displays any related circumference. 1,5 V, AA, LRC 6 10 °C to 40 °C -10 °C to 50 °C 80%, with no condensation EN 50081-2 EN 50082-2 Housing in anodized aluminium; resting cylinders in hardened steel 420 x 160 x 90 mm (max. L x H x D) Net weight of main part: 2,4 kg; gross weight of ZEDURAM complete: 4,6 kg (No. 01139001) 5,1 kg (No. 01139002) Height Measurement • Measures height in the form of step and thickness dimensions up to 250 mm. • Determines internal dimensions such as the distance between two parallel surfaces if the probe constant is taken into account. D-9 M EASURING I NSTRUM ENTS FOR L ARGE D IM ENSIONS Angle Measurement Plastic case • Allows workpiece positioning with or without the use of the rules Identification number Declaration of conformity HP 82240 B Printer 3 Matrix printer for use with the 57 mm wide thermal paper roll HP 821175 Cableless, infrared data transfer (ZEDURAM 2020) Transfer distance: £ 450 mm / £18 in Max. reception angle: ± 60° (horizontal) -10° to + 20° (vertical) a 4 batteries 1,5 V, AA, type LRC 6 + – 0 °C to 50 °C a -40 °C to 60 °C 5% to 95% at 40 °C, non-condensing Security: EN 60950: 01139001 ETALON ZEDURAM 2010 For measuring large diameters as well as heights and angles; numerical display with 1 to 0,01 mm resolution; battery-powered. 1 Set of 4 batteries, 1,5 V, AA, type LRC 6 3 Resting discs 2 Rules for angle measurement 01139002 ETALON ZEDURAM 2020 Identical to No. 01139001, but with added infrared data transfer capability Also included: 1 Matrix printer with infrared data transfer, type HP 82240B 1 Thermal paper roll, 57 mm wide, type HP 821175 250 mm 9.8 in 0 -120 mm -4.75 in D-10 EN 50082-1 EN 55022: 1994 Class B EN 61000-3-2:1995 EN 61000-3-3:1995 furnished with: 04768002 1992 +A1, A2 0 91 x 61 x 186 mm 0,4 kg M EASURING I NSTRUM ENTS FOR L ARGE D IM ENSIONS Laser Distance Meters • Fast and effective – Capture long distances very quickly, with no additional help. • Accurate and reliable – Measure any distance up to 200 meters most accurately and reliably. • User-friendly – Eliminate the need for tiresome manual calculation. • Versatile – Made for indoor and outdoor applications as well as in any hard-to-access areas. 3 TESA SPACER 100 Distance measurement within everyone’s reach! Laser switches off Small but strong, this laser meter fits any pocket and can be used every- itself after where. Provided with a laser range up to 100 m along with shortcut keys that make addition, subtraction, surface and volume calculations easier. 3 min. or 6 min. for the tool. Automatically for both. IP54 -10°C to + 50°C -25°C to + 70°C Identification number Suited carrying case Declaration of conformity User’s manual with safety instructions Shortcut keys enabling – Addition and subtraction of measured values – Calculation of surfaces and volumes – MIN/MAX distance measurement 01130010 TESA SPACER 100 Provided with one set of 2 batteries, AAA, type LR 03, 1,5 V. Also with dust cover. Optional Accessory 04761059 1 Set of 4 spare batteries, AAA, type LR 03, 1,5 V. D-11 M EASURING I NSTRUM ENTS FOR L ARGE D IM ENSIONS TESA SPACER 200 Versatile, also with ergonomic design Handy, easy-to-use. Includes a viewfinder for easy targeting along with a practical folding datum end piece for measuring short and long distances. Identifies the right datum value automatically. 3 Laser switches off itself after 3 min. or 6 min. for the tool. Ergonomic design Automatically for both. – Laser range up to 200 m – Folding datum end piece IP54 – Built-in view finder (2x magnification) – Integrated spirit level -10°C to + 50°C -25°C to + 70°C Identification number Suited carrying case Declaration of conformity User’s manual with safety instructions 01130020 TESA SPACER 200 Provided with one set of 2 batteries, AAA, type LR 03, 1,5 V. Also with dust cover. Optional Accessory 04768002 1 Set of 4 spare batteries, AAA, type LR 03, 1,5 V. Also available upon request Model with Bluetooth wireless connection D-12 M EASURING I NSTRUM ENTS FOR L ARGE D IM ENSIONS Main functionalities with additional key features Spacer 100 Spacer 200 Surfaces / Volumes • Space measurement – • • • • • Release switch – Addition / Subtraction • • Storage of constant values – Recall of last measured values 19 MIN/MAX distances, continuous measurement Illuminated display • Multifunction end piece – Coupling thread for tripod 1/4” – Integrated view finder – Built-in spirit level – 1 20 • • • • • Technical Data Spacer 100 Spacer 200 Accuracy* ± 1,5 mm Laser range 0,05 ÷ 100 m 0,05 ÷ 200 m 0,000 m, 0,00 m 0,000 m, 0,00 m, 0 mm 0.00 ft, 0.00 1 /16 ft in, 0.00 f t, 0.00 1/32 ft in, 0’00’’ 1/16, 0.0 in, 0 1/16 in 0’00’’ 1/32, 0.0 in, 0 1/32 in Numerical scale ± 2 mm Distance 10, 50, 100 m 10, 50, 100 m Laser point diameter 6, 30, 60 mm 6, 30, 60 mm Autonomy » 5'000 measurements » 10'000 measurements Batteries Type AAA, 2 x 1,5 V Type AA, 2 x 1,5 V Dimensions 135 x 45 x 31 mm 148 x 64 x 36 mm Weight (with batteries included) 145 g 241 g Laser wavelength 635 nm, < 1mW 635 nm, < 1mW * Measuring accuracy up to 30 m (standard deviation 2 s). The max. deviation may be measured under bad conditions, e.g. high sunlight radiation or low reflective pointed surface. This deviation may increase by at least ±10 mm over 30 m without target plate. Laser safety Both laser distance meters belong to the safety class II. This means that even if the laser beam is inadvertently focused by the eye, the natural reflex of blinking will prevent any eye damage. D-13