Clivet P-Matic for WLHP

Transcription

Clivet P-Matic for WLHP
•
•
•
•
•
•
Flexible and guaranteed comfort in all conditions
Easy to use
Increased system reliability
Prompt corrective and emergency actions
Energy optimisation
Increased system service life
Clivet P-MATIC for WLHP
Supervision System specialised in the total management of water
loop climate control systems with Clivet heat pumps
Clivet P-MATIC for WLHP
Supervision System specialised in the total management of water loop climate
control systems with Clivet heat pumps
Thanks to their versatility and energy efficiency, water loop systems are widely used in a range of different applications in the service and industrial
sectors, including large supermarkets and shopping centres, office blocks, hotels and restaurants.
For over a decade, Clivet has been successfully developing complete climate control systems, comprised of a range of specialist heat pump
models, the installation supervision system able to boost efficiency and reliability, and the numerous user services.
Clivet P-MATIC for WLHP is the supervision system that automatically regulates the entire loop system,
monitors Clivet heat pumps and brings all the operating information together in a single place, making
it immediately available to service personnel.
This entails a reduction in the energy needed to manage the system and simplifies its running and
maintenance, increasing its reliability and cost effectiveness.
The loop system is adjusted by the Clivet control panels, fitted with a touchscreen user interface
which can be used to control the system even when not connected to the main supervision computer.
This comprises the automatic management of the:
• Water loop cooling system by means of evaporative coolers, dry coolers or geothermal sources,
with the relative pumping stations or adjustment valves
• Water loop heating system by means of high efficiency boilers, condensing boilers, heat pumps
or geothermal sources, with the relative pumping stations or adjustment valves
• Any other built-in or energy recovery systems, such as commercial refrigeration system heat
recovery
• Main pumping system, either constant or variable flow
The adjustment logic envisages numerous Clivet factory-set operating modes, able to reduce
consumption and maintain the best operating conditions by means of:
• Loop water temperature adjustment on the heat pump return
• Minimum and maximum loop water temperature limit controls
• Optimised activation and deactivation of available resources
• Loop water flow control
• Antifreeze control for the pipes and outdoor equipment
• Prevention of service interruptions due to simultaneous failures on several units.
The system is supervised from the main workstation, usually located in a technical room. From here
the technical personnel can access the entire user-friendly and password-protected system and its
components, navigating 3D graphics customised for the specific installation.
• Immediate display of the whole system and any deviations from the set conditions
• Detailed view of each serviced area and possibility to change operating conditions
• Calculation of energy exchanged
• Switching the heat pumps on and off in automatic or manual mode
• Operating status, wellbeing and alarm management
• Access to heat pump operating parameters on the basis of the different user profiles
Clivet P-MATIC for WLHP is entirely developed and manufactured by Clivet and undergoes individual testing before delivery. The supply typically
comprises:
• Supervision workstation, complete with professional Personal Computer with high frequency Intel processor, high resolution TFT monitor,
DeskJet A4 printer, convertor box for RS485 serial communication and ADSL or modem remote control system.
• Control panel(s), with built-in microprocessors and power auxiliaries
• Control and supervision software
• System control elements, such as temperature and water flow probes
• Navigation menu customisation by means of graphic representations of the building in 3D and by individual floor.
Each system also comes with the Clivet check-up, training and start-up.
Via Camp Lonc 25
32032 Z.I. Villapaiera Feltre BL
Tel. + 39 0439 3131
Fax. + 39 0439 313382
The information contained in this document is not binding and may be changed by the Manufacturer without notice. No part of this document may be reproduced.
www.clivet.it - [email protected]
DF08N0021--00
CLIVET S.p.A.