Univox DLS 50 - Gordon Morris Ltd Hearing Specailists

i
information sheet
UNIVOX DLS-50
• DLS-50 is a compact yet powerful loop amplifier for
Compact loop amplifier with Dual Action AGC
for home use
wireless listening through your hearing aid.
• Comes in 3 different options depending on where the
amplifier is being used (see the table on right of page).
• DLS-50 is developed for maximum power, versatility
and ease of use and is equipped with UniVox automatic volume control (Dual Action AGC) for a
smooth sound experience.
Product Codes:
LFU1206
DLS-50 amplifier
LFU1207
DLS-50 System 1 with cable and clips
LFU1208
DLS-50 System 2 with loop pad
LFU1209
DLS-50 System 3 with car loop kit
• The thumb wheel volume control with digits for easily
memorised setting of the right field strength along
with bass and treble controls secures pure sound
quality.
• Connect DLS-50 to your TV, stereo, MP3, a microphone or any sound source that you want to hear
clearly.
• Compact and powerful induction loop amplifier for
use with TV/digibox/satellite/VHS/DVD/stereo/MP3/
microphone etc
• UniVox Dual Action AGC for smooth quality sound
• Volume thumb wheel, bass and treble controls
• Easy connection to loop pad, sofa or room loop
• Separate headphone output
• Blue LED’s for indication of power connection, signal
source level and loop current
• Choose between loop pad, sofa loop and room loop
cable for use with your DLS-50 and cover exactly the
area you want.
• Place the loop pad in your favorite chair, the sofa
loop underneath your sofa or the room loop around
the walls of your room and switch your hearing aid to
T-position.
• You can monitor your DLS-50 with three indicators
in the front panel with blue LED’s for power
connection, signal source level and loop current.
www.gordonmorris.co.uk
[email protected]
Tel / Text Phone
01458 272121
Fax: 01458 274545
Gordon Morris Ltd.
Unit 21 Wessex Park.
Somerton Business Park.
Somerton. Somerset. TA11 6SB
UNIVOX DLS-50
TECHNICAL DATA
Power Supply
Coverage area
Loop output
Max current
Max voltage
Frequency response
Distortion
Connection
Headphones Output
Inputs
Connection
Mic Input
Connection
Mic/line input & line input
Dual Action AGC
Trimmers
Optical indication
Other information
Note
Connection
Dynamic range
Attack time
Release time
Bass control
Treble control
Volume control
Mains connection
Loop current
Input signal level
Dimensions
Weight
Part No.
Power supply
Dual action AGC
In case the TV doesn’t
have a Scart output
External power supply 10-20VA (included)
50m² room loop according to IEC 60118-4:2006
9App, short circuit safe output. For loop pad (max. 2 loop
pads), sofa loop cable or room loop cable
6.6Vpp (open output)
70-15000Hz (±3dB)
<1%
2 pin DIN (loop pad and sofa loop cable) or spring clip terminal
(wire)
Switches automatically to voltage feedback for correct fre
quency response when using the headphones
3.5mm jack
2-170mV/5kΩ (phantom voltage). Separate high gain amplifier
with AGC
3.5mm jack
10mV-4.3V/5kΩ (phantom voltage in Mic/line) knee-point
setting
3.5mm jack
>70dB
2-500ms
0.5-20dB/s
0- +12dB, potentiometer at front panel
0- +9dB, potentiometer at front panel
Graded 0-9, thumb wheel at front panel
Blue LED
Blue LED
Blue LED
150 x 92 x 25mm (LxWxH)
0.25kg (0.4kg including power supply)
202050 (no power supply)
Technical data may vary due to different power supplies
Variable attack/release times holding peak and average level
constant
Use the 13A microphone. It can be attached on your TV’s
speaker grid
N.B Before fitting the car kit, you are advised to switch hearing aid/s to ‘T’ position and drive the
car for a few minutes to see if you pick up any interference from car electrics. If there is a high
buzz then this system, will not be suitable for your vehicle.
For further technical information, please contact Gordon Morris Ltd.
(01458) 272121