Duplo Folder

Transcription

Duplo Folder

Duplo Folder
Instruction Manual
Please let our service people install the machine.
DUPLO CORPORATION
FEATURES OF DUPLO FOLDER
1. Easy to Use
•
•
Automatic detection of paper size (A3 to B6).
A one touch function automatically returns the folding
stopper and stacker to their proper positions.
2. Enhanced Basic Performance
•
•
•
Folding speed of 45 to 120 sheets/min.(B4, 64g/m ,
single fold).
Loading capacity of the paper feed table: 500 sheets (B4
64g/m 2)
Paper thickness: 52.3 to 157g/m 2
2
3. Various Memory Functions (Standard)
•
•
Correction memory function for fixed folding (36
types).
Registration of special folding methods (MAX 2
memories).
4. Fixed Folding of Non-Fixed Paper
Can Be Carried Out Easily by
Inputting Their Size on the Keypad.
(Paper length folding mode)
5. Various Types of Paper (Art/Coated
Paper) Can Be Folded by Easy
Operation.
6. V a r i o u s F u n c t i o n s ( S t a n d a r d )
Ensuring Folding Accuracy and
Usability
•
•
•
•
Test folding can be carried out.
The counter display can be used for additions and
subtractions.
A slant correction device is installed to straighteng
paper.
Cross folding can be carried out.
DECLARATION OF CONFORMITY
Duplo Corporation, located at 7-6, Izumi Honcho 1-chome, Komae-shi, Tokyo 201. Japan, declares that the following
product.
Name of Product: Paper folding machine.
Type No.: DF-520
complies with the provisions defined by Low Voltage Directive 73/23/EEC under the application of IEC Publication 950.
Edition 1with Amendment 1 (1992) including the deviation of EN60950.
It was tasted by Japan Electrical Testing Laboratory Located at 14-12. Yoyogi 5-chome, Shibuya-ku. Tokyo 151, Japan
under the test number 93-0407.
ÜBEREINSTIMMUNGSERKLÄRUNG
Die Duplo Corporation mit Sitz in 7-6, Izumi Honcho 1-chome, Komae-shi, Tokio 201, Japan, versichert, daß das folgende
Produkt.
Bezeichnung des Produkts: Papierfaltmaschine
Typen-Nr.: DF-520
die in der EWG-Niederspannungsrichtlinie 73/23/EEC festgelegten Bestimmungen erfullt, unter Anwendung der IEC
Veröffentlichung 950, Ausgabe 1 mit Zusatz 1 (1992), einschlieBlich Abweichung von EN60950.
Die Maschine wurde vom Jpapan Electrical Testing Laboratory mit Sitz in 14-12, Yoyogi 5-chome, Shibuya-ku, Tokio 151,
Japan unter der Prüfnummer 93-0407 geprüft.
DECLARATION DE CONFORMITE
Duplo Corporation, située à 7-6, Izumi Honcho 1-chome, Komae-shi, Tokyo 201, Japon déclare que le produit suivant:
Nom du produit: Plieuse de papier
N de type: DF-520
est conforme aux dispositions définies par la Directive sur la basse tension 73/23/EEC en application de la Publication IEC
950. Edition 1 avec Amendement 1 (1992) y compris la dérogation de EN60950.
Ce produit a été mis à l'essai par Japan Electrical Testing Laboratory situé à 14-12, Yoyogi 5-chome, Shibuya-ku, Tokyo
151, Japon, sous numéro d'essai 93-0407.
2
SAFETY PRECAUTIONS
Thank you for purchasing a Duplo Folder
.
This instruction manual describes the functions of the Duplo Folder
, how to operate it, and safety precautions in use.
Before using your unit, read this instruction manual carefully in order
to use your unit correctly and get the best out of it.
After reading the manual, keep it safely for future reference when you
have questions regarding your unit or when your unit malfunctions.
Safety Symbols
Various safety symbols are shown in this instruction manual and labeled on the unit to guide you in using
your unit correctly, and to prevent injuries to you and those around you, and other damages.
These symbols have the following meanings.
WARNING
Indicates death or serious injuries will result if this precaution is not followed
and consequently, the unit is incorrectly handled.
CAUTION
Indicates injuries and damages to objects will result if this precautions is not
followed and consequently, the unit is incorrectly handled.
Safety Symbols
Beware of Electric Hazard
The % symbols warn of possible danger.
The specific danger is shown inside the %.
(In this example, the symbol warns of possible electric hazard.)
The
Disassembly Prohibited
symbols show prohibited acts.
The specific prohibited act is shown inside the .
(In this example, the symbol indicates disassembly is prohibited.)
The ¶ symbols show instructions.
The specific instruction is shown in the ¶.
(In this example, the symbol instructs that the plug be disconnected.)
Disconnect Plug
3
CONTENTS
1.
WARNING ........................................ 5
10.USING NON-FIXED PAPER ................ 44
PRECATION ..................................... 7
10-1. FIXED FOLDING PROCEDURE .............. 44
10-2. SPECIAL FOLDING PROCEDURES ....... 46
3. INSTALLING THE UNIT ........................ 8
11.CROSS FOLDING ............................... 51
3-1. REMOVING THE PRESS RELEASE
LEVER ........................................................ 8
3-2. COMPONENT PARTS ............................... 9
3-3. ATTACHING THE PARTS ........................ 10
11-1. PRECAUTIONS UPON USE .................... 51
11-2. CROSS FOLDING FIXED PAPER ........... 52
11-3. CROSS FOLDING UN-FIXED PAPER ..... 54
2.
12.TROUBLESHOOTING ......................... 57
4. NAMES OF THE PARTS ..................... 12
5. NAMES AND FUNCTIONS OF THE
CONTROL PANEL PARTS PANEL
PARTS ................................................ 13
6. PRECAUTIONS BEFORE USE ........... 15
6-1. PAPER TO BE USED ............................... 15
6-2. PRECAUTIONS FOR STACKING
PAPER ...................................................... 16
6-3. GENERAL PRECAUTIONS ...................... 18
12-1. PAPER HAS JAMMED NEAR THE PAPER
FEED RING .............................................. 57
12-2. PAPER HAS SLIPPED NEAR THE PAPER
FEED SECTION ....................................... 58
12-3. PAPER HAS COILED AROUND THE
RUBBER ROLL INSIDE THE UNIT .......... 58
12-4. PAPER HAS JAMMED AT THE FIRST
FOLDING PLATE ..................................... 59
12-5. PAPER HAS JAMMED AT THE SECOND
FOLDING PLATE ..................................... 60
12-6. PAPER HAS JAMMED NEAR THE
STACKER ................................................. 62
7. OPERATION PROCEDURES .............. 19
7-1.
7-2.
7-3.
7-4.
7-5.
7-6.
FIXED FOLDING OF FIXED PAPER ....... 19
Folding Thick Paper .................................. 25
Double Folding Thick Paper ..................... 26
SPECIAL FOLDING OF FIXED PAPER ... 29
Calling the Registration ............................. 34
SWITCHING THE MODE USED. ............. 34
13.EMERGENCY STOPS ......................... 63
14.ERROR MESSAGES ........................... 64
15.TROUBLE SHOOTING GUIDE ........... 66
16.Cleaning the Unit ................................ 69
8. FOLDING ADJUSTMENTS AND
REGISTERING CORRECTIONS ......... 36
8-1. ADJUSTING THE FOLDING SLIPPAGE
IN THE VERTICAL DIRECTION ............... 36
8-2. REGISTERING THE FOLDING STOPPER
CORRECTION .......................................... 38
8-3. ADJUSTING THE FOLDING SLIPPAGE IN
THE HORIZONTAL DIRECTION .............. 40
9. USING ART/COATED PAPER ............ 41
9-1. PRECAUTIONS FOR STACKING
PAPER ...................................................... 41
9-2. OPERATING PRECAUTIONS .................. 42
4
16-1. Cleaning the Rubber Roll .......................... 69
16-2. Cleaning the Paper Feed Ring ................. 70
17.Specifications ..................................... 71
1.
1
WARNING
Use only the power supply voltage displayed.
6%
AC230V +–10%
Voltages Other than 230V Prohibited
2
Ensure that the total current of all the units connected to the wall outlet does not
exceed power supply capacity.
When using the extension cord, ensure that the total current of all the units connected to this extension cord does not exceed the specification of the extension
cord.
If it exceeds the specified current or power supply capacity, fire hazards may result.
Check Capacity
3
Do not scratch, damage, or remodel the power cord.
Do not place heavy objects on the power cord, nor pull or bend it.
Or the power cord will damage and cause fire and electric hazards.
Prohibited
4
Do not bind up the power cord even if it is too long, or this will cause poor heat
emission and fire hazards as a result.
Prohibited
5
Do not touch the power plug with wet hands, or electric hazards may result.
Prohibited
6
Disconnect the power plug from the outlet by pulling the plug instead of the power
cord.
Pulling the power cord will damage the power cord and cause fire and electric hazards.
Prohibited
7
If the power plug or cord becomes abnormally hot, first turn off the power switch
and disconnect the power plug from the outlet.
If used continuously in this state, fire and electrical hazards may result. Contact
your dealer.
Disconnect Plug
5
1.
8
WARNING
When not using the product for a long period of time due to vacations, etc., be sure
to disconnect the power plug from the outlet. If it malfunctions, fire hazards caused
by power leakage may result.
Disconnect Plug
9
Remove dusts on the blades of the power plug and the surface from which the
blades extend with a dry cloth. The dusts attached may cause fire hazards.
Wipe Plug
10 If the device is abnormally hot, emitting smoke or an abnormal smell, etc., first turn
off the power switch and disconnect the power plug from the outlet. If the device is
used in these states, fire and electrical hazards may result.
Contact your dealer immediately.
Disconnect Plug
11 Do not place the device and its power cord near heating equipment and the vents of
heaters, or the covers and power cord coating may melt and cause fire and electrical hazards.
Prohibited
12 Do not place the device where people may step on the power cord, or the power
cord may damage and cause fire and electrical hazards.
Prohibited
13 Do not remove the covers and rear panels using tools.
The inside of the device contains high voltage and mechanism driving parts which
may cause electrical hazards and injuries.
14 Do not remodel the device, or fire and electrical hazards may result and cause injuries.
15 Before cleaning the device, be sure to disconnect the power plug from the outlet, or
the device may be started accidentally during cleaning and cause injuries.
Prohibited
6
2.
1
PRECATION
Do not install the product in environments other than those specified, as this will
not only cause the product to rust and malfunction, but will lead to power leakage,
fire hazards, and electrical hazards as well.
Temperature : 5 ˚C to 35 ˚C
Humidity : 20%RH to 85%RH
Temperature Change Rate : Below 10 ˚C/h
Humidity Change Rate : Below 20%/RH/h
Prohibited
2
Do not install the device where it is very dusty, or it may malfunction.
Prohibited
3
Do not lift up nor tilt the device, or it may turn over and cause injuries.
Prohibited
4
Do not install the device where there are vibrations, or it may move, turn over, and
cause injuries.
Prohibited
5
Do not use the device in direct sunlight.
Prohibited
6
Do not place the device on a shaky table or in a tilted position, or it may fall and
cause injuries.
Prohibited
7
When moving the device, be sure to disconnect the power plug from the outlet, or
the power cord may damage and cause fire and electrical hazards.
Disconnect Plug
8
Do not use the device where it may be exposed to splashing water droplets and
power leakage occurs easily, or electrical hazards may result.
Prohibited
7
3. INSTALLING THE UNIT
3-1. REMOVING THE PRESS RELEASE LEVER
This press release level is attached to the unit at shipment to prevent the rubber roll from
becoming distorted.
Be sure to remove it when installing the unit.
Take note that the unit will be damaged if it is used without removing the lever.
Remember to remove it in the following order when installing the unit.
1
Two press release levers are inserted
in the left and right shaft edges of the
rubber roll.
<Operating side>
Press release lever(B)
Press release lever(A)
Press release lever(B) <Non-operating side>
2
First remove press release lever(A).
• To remove, push inwards and pull out the press
release lever, as shown in the figure.
Also remove that of the operating side in the
same way.
• Next, pull out press release lever(B) as shown in
the figure.
Also remove that of the operating side in the
same way.
8
Press release lever(B)
3-2. COMPONENT PARTS
After checking that you have following parts, attach them to the unit.
ó
ò
ô
ö
Duplo Folder
Instruction Manual
Please let our service people install the machine.
DUPLO CORPORATION
No.
ó
ò
Name
Qty.
First folding plate
1
Second folding plate
1
No.
ô
ö
Name
Qty.
Cross folding lever
1
Instruction Manual
1
9
3-3. ATTACHING THE PARTS
1
First, attach the second folding plate.
• Before starting, push the lock lever at the side of
the folding plate to “UNLOCK”.
• Next, insert the folding plate into the unit.
• After inserting it properly, push the lock lever to
“LOCK”.
Lock lever
Second
folding plate
2
Attach the first folding plate in the
same way.
Lock lever
* If the paper jams inside the folding plate, turn off
the power supply, pull out the control cord of the
folding plate, push the lock lever to ''UNLOCK",
and remove the folding plate.
Stopper
First
folding plate
3
After attaching the folding plates,
connect the control cord of the first
folding plate to connector No. 1 and
that for the second folding plate to
connector No. 2.
Note 1: Be sure to insert the control cords
correctly.
Note 2: Be sure to turn off the power before
connecting/disconnecting the control
cords.
10
Control cord 1
Control cord 2
4
Attach the cross folding lever at its
proper place.
Cross folding lever
<Parts Used>
Cross folding lever .................................................. 1
Note:
• The unit has a built-in battery to protect the different types of data registered.
• This battery must be charged when installing the unit for the first time. To charge it, leave the power switch of the unit
on for about five hours.
• The battery will wear out when the unit has been left off continuously for about three months. Therefore turn on the
power occasionally to charge it.
• As data registered and set will be lost when the battery has worn out, be sure to keep a copy of these data.
11
4. NAMES OF THE PARTS
Jam correction handle
Rubber roll
Paper feed ring
(For moving)
Set knob
First folding plate
Top cove
Control panel
Paper feed table
Cross folding lever
Paper feed pressure
adjusting lever
Guide
Second folding plate
Auxiliary paper
feed plate
Stacker roller
Power switch
Paper set lever
Paper receiving
stopper
Paper separator pressure
adjusting dial
Paper receiving tray
Paper feed ring
Slant correction
paper feed knob
12
5. NAMES AND FUNCTIONS OF THE
CONTROL PANEL PARTS PANEL PARTS
15
–1
0
1
2
3
4
5
6
14 13
1
1
2
1
1
2
3
4
5
2
6
7
8
9
0
11
10
Name
No.
1 Start/stop button
12
9
8
7
6
5
C
4
3
2
1
Function
Starts/stops folding.
Each time this button is pressed, start/stop is repeated alternately.
2
3
4
5
6
Test button
Number of sheets/
paper length
switch button
Clear button
Keypad
(0 to 9)
Folding mode
selection button
Each time this button is pressed, the unit folds two sheets of paper and stops.
Sets the number of sheets to be folded and switches the input of the paper length.
The paper length input is memorized when it is set.
Press this button to change the number of sheets to be folded and the paper length.
Press these buttons to set the number of sheets to be folded and the paper length.
There are 6 types of fixed folding methods and 2 types of special folding methods
available.
When the power is turned on, the display lamp of the single fold mode will light up.
Each time the button on the right is pressed, the folding mode lamp display switches to
the right.
When the left button is pressed, it switches to the left.
The special folding mode cannot be selected if no special folding method has been
registered.
7
Speed controller
The processing speed can be changed freely within the range of 45 to 120 sheets/min.
The processing speed increases as the knob is slid to the right and decreases as it is slid
to the left.
8
When the right button (+) is pressed, the folding stopper moves to the right.
First folding
stopper adjusting When the left button (–) is pressed, the folding stopper moves to the left.
button
The stopper moves slightly each time the button is pressed, and continues moving
when pressed continuously until it is released.
9
Second folding
When the right button (+) is pressed, the folding stopper moves to the right.
stopper adjusting When the left button (–) is pressed, the folding stopper moves to the left.
The stopper moves slightly each time the button is pressed, and continues moving
button
when pressed continuously until it is released.
13
5. NAMES AND FUNCTIONS OF THE CONTROL PANEL PARTS
No.
Name
Function
: Special folding
This button is used to memorize the stopping position of the folding stopper, stacker,
registration button etc. when moved in special folding modes such as cross folding and non-fixed folding
modes, etc.
Up to two registration methods can be memorized. Once memorized, the registered
data is preserved even after the power is turned off.
To erase the registered data, keep pressing the corresponding registration button (1) or
(2) until the buzzer sounds.
A
Fixed folding
correction button
This button is used to register the correction value when the folding stopper is adjusted
finely in the fixed folding mode.
Up to 36 types (No. of fixed folding modes x paper type) of correction values can be
registered.
To erase the registration, select the folding mode of the corresponding paper size to be
delected and continue pressing this button until the buzzer sounds.
B
Number of sheets/ This window displays the number of processed sheets (counter), the values input for
paper length, error messages, etc.
paper length
display window
C
Paper size display This window displays the size of paper placed on the paper feed table which is
automatically determined (fixed sizes of A3 to B6).
window
Also displays the operation state “ O . P” when the paper length is input.
D
E
14
Fixed folding
display window
Special folding
registration
display lamp
This window displays six types of fixed folding modes.
The display lamp blinks when a mode registered for folding correction is selected.
This lamp lights up when the special folding mode is set.
This mode cannot be selected if no special folding method has been registered.
6. PRECAUTIONS BEFORE USE
6-1. PAPER TO BE USED
•
Straighten folded or curled paper before use.
•
Make sure that the ink on the paper has dried up properly
before use.
If the ink has not dried properly, it may dirty the
machine, and cause other problems such as dirtying the
folded surface with ink, etc.
15
6-2. PRECAUTIONS FOR STACKING PAPER
•
If the paper is not stacked neatly on the paper feed table,
the unit will not be able to read the size of the paper
accurately and as a result, may determine the paper as
outside the standard size. Therefore, be sure to stack the
paper neatly.
The paper feed table has a built-in device for reading
paper size.
Take note that this device will not be able to read the
paper size correctly if the paper is stacked unevenly.
This may as a result cause problems.
•
Automatic paper size detection can be carried out for
paper up to ±2.5 mm of the fixed paper.
•
If the paper is not stacked properly lengthwise, mis-feed
or chain feed may occur.
•
When stacking just a few sheets of paper on the paper
feed table, lower the paper set lever while pressing the
back edge of the paper.
Paper
Paper set lever
16
Guide plate
•
Adjust so that the front part of the paper touches the
paper feed ring in front lightly. (Arrow)
Paper
Paper feed
rings
•
•
The paper will be folded as shown in the figure if placed
with the printed surface up on the paper feed table.
For “accordion fold” and “irregular accordion fold”, the
printed surface of some paper will be folded outwards.
Single fold
Double fold
Irregular
Letter fold
accordion fold
Accordion fold Brochure fold
17
6-3. GENERAL PRECAUTIONS
1
Occasionally make sure that the
power plug is not abnormally hot.
If the power plug is abnormally hot, contact
your nearest dealer.
2
Make sure that the power cord is not
frayed nor scratched.
3
Connect the power plug to the
electrical outlet properly upon use.
4
When not using the unit over a long
period of time, turn on its power
occasionally.
The unit has a built-in battery to protect the different
types of data registered.
• The battery is used when the power of the unit is
off. (It will be used even if there is nothing
registered.) It is charged when the power is on.
• As the data registered and set will be lost when the
battery has worn out, be sure to keep a copy of it.
• The battery will wear out when the unit has been
left off continuously for about three months. Turn
on the power occasionally to charge it.
18
7. OPERATION PROCEDURES
7-1. FIXED FOLDING OF FIXED PAPER
Start the various fixed folding operations for fixed paper as follows.
1
Insert the power cord in the electrical
outlet and turn on the power.
• Press “I” to turn on the power.
• Press “O” to turn off the power.
The folding stoppers and stacker rollers on the
folding plates will move to their initial setting
positions when the power is turned on. Wait
for a few seconds for this to complete which is
indicated by the sound of the buzzer.
2
Raise the paper set lever and place
some paper on the paper feed table.
Power switch
Guide
Paper
Fixing screw
Fixing
screw
• Loosen the fixing screws of the guide, and move
the guide slightly more than the width of the paper.
• Loosen the paper and stack sheets of paper neatly
on the paper feed table.
• Insert the paper until its front part touches the front
guide plate lightly.
Paper set lever
3
After pressing the guide to the side of
the paper lightly, tighten the screws
to secure the guide.
Guides
Fixing screw
Fixing screw
• The left and right guides move in the same
direction.
Guides
Paper can be stacked to a height of
approximately 45 mm at one time. Do not
stack too many sheets paper.
4
Lower the paper set lever.
Paper set lever
19
5
Press the “fold mode selection”
button and select the desired fold
mode.
• When the right “folding mode selection” button is
pressed, the lamp on the right of that currently lit
will light up.
• When the left one is pressed, the lamp on the left of
that currently lit will light up.
• If “special folding” had been registered previously,
“special folding” modes 1 and 2 can be selected by
pressing these “folding mode selection” buttons. If
no special folding methods have been registered,
the special folding mode cannot be selected and
instead the fixed folding mode will be set.
6
Check the paper size display.
• When paper outside the fixed size is used, the size
of the paper will not be detected automatically and
consequently not displayed.
When using such a kind of paper, refer to
“Using Non-Fixed Paper” on page 44.
20
7
Adjust the paper feed pressure
adjusting lever to “0”.
Paper feed pressure adjusting lever
• If the paper slips and no paper is fed, raise the
paper feed pressure one level from 0 to 1.
• If several sheets of paper are fed at one time, lower
the paper feed pressure one level from 0 to –1.
When using art paper or coated paper, refer to
“Using Art /Coated Paper” on page 41.
8
Open the Top cover and adjust the
separator pressure adjusting dial to
“0”.
• If several sheets of paper are fed at one time, raise
the separator pressure dial from 0 to 1 or 2.
• Adjust the separator pressure by gradually
increasing the level 0.5 each time.
Separator pressure adjusting dial
When using art paper or coated paper, refer to
“Using Art /Coated Paper” on page 41.
9
Close the Top cover and adjust the
speed controller as desired.
21
10
Press the “test” button and perform
test folding.
• Two sheets of paper will be folded.
Even after two folded sheets of paper have
been ejected, the machine will not stop
working when the stop button is pressed until
the buzzer sounds and the motor inside stops
completely.
The unit will not respond to whatever button
on the control panel is pressed.
• The paper will be folded properly if it is folded
after it has reached the stopper inside the folding
plate.
• If the paper flowing into the folding plate is folded
without reaching the stopper due to conditions
such as environmental conditions (temperature,
humidity), paper quantity, its type, paper couch
conditions, folding speed, curling etc., it may not
be folded properly.
• In some cases, the paper may also coil around the
rubber roll and cause problems.
• As such problems can be corrected by decreasing
the folding speed, keep decreasing the speed until
the paper is folded properly.
22
11
Check the folded paper for testing.
• Proceed onto the next step if the sheets of paper
have been folded satisfactorily.
Check the second ejected paper to confirm
that folding is performed correctly.
Paper for testing folding
• If the sheets of paper have not been folded
satisfactorily, refer to the following steps.
óIf folding has slipped in the vertical direction:
Press the “folding stopper adjustment” button and
adjust the folding slippage.
Refer to “Adjusting the folding slippage in the
vertical direction” on page 36.
òIf the folding has slipped in the horizontal direction:
Rotate the “slant correction knob” and adjust the
folding slippage.
Refer to “Adjusting the folding slippage in the
horizontal direction” on page 40.
Check the folding slippage in the horizontal
direction with the second sheet of test fold
sample.
12
Slant correction knob
Perform test folding again and make
sure that there is no slippage.
• To register the corrected stopper position, refer to
“Registering the Folding Stopper Correction” on
page 38.
Even if the paper of one size is used, folding
slippage in the vertical direction may occur
because of the kind of paper used, the paper
thickness, processing speed.
It is therefore necessary to adjust the folding
stopper slightly.
23
13
Input the number of sheets to be folded
on the keypad.
• Press the numerical key buttons and input/set the
number of sheets to be processed.
• When this is input, the counter drops.
• If this is not input, the counter increases.
14
After completing all preparations,
start operation.
• Press the “start/stop” button.
15
The unit stops automatically when it
has reached the number of sheets to
be processed.
• It also stops automatically if there is not more
paper on the paper feed table.
16
24
To interrupt or to stop operation,
press the “start/stop” button again.
7-2. FOLDING THICK PAPER
When folding into two cardboard paper
and fine quality thick paper (157 g/m2), the
corners and center of the folded part of the
paper may bend due to conditions such as
the using environment (terperature,
humidity), paper size, fiber direction of the
paper, etc. This is not a malfunction of the
machine.
Should the paper bend as above, perform
the following steps.
1
Press the + side of the FOLDING
PLATE 2 button several times (3 to 5
times) and move the folding stopper
of folding plate 2.
2
Press the START/STOP button and
start folding operations.
Should the paper bend again during
folding, press the START/STOP
button and stop the machine. When it
has stopped completely, press the +
side of the FOLDING PLATE 2 button
twice and start folding operations
again.
3
After completing the folding
operations, turn off the POWER
switch.
Corner
Center of folded part
Note :
If thin paper is folded with the folding stopper of
folding plate 2 moved to fold thick paper, the thin
paper will not be folded properly. Therefore after
completing folding operations for thick paper, always
turn off the power once.
4
Perform steps 1 to 3 only for folding a
thick paper into two.
Paper can be folded into more than
two parts (Inner triple-folding, etc.)
properly using the normal procedure.
POWER switch
25
7-3. DOUBLE FOLDING THICK PAPER
• When thick paper (above 105 g/ u) such as fine
quality paper, etc. is folded into fours, its thickness
may cause its folds to open when it is ejected to the
stacker. As a result, the paper will not be able to
pass through the stacker rolls and paper jam will
occur.
Note : Take note that paper below B6 size
(157 g/m2) cannot be ejected if folded
into fours.
• In this case, proceed in the following steps.
óPlace the paper on the paper feed table, lower the
Paper
paper set lever and raise the paper feed table.
Paper set lever
òWhile pressing the “clear” button, press numerical
key “5” or “6” and move the stacker roll manually.
ôAdjust so that the stacker rolls are above the belt.
Lever
Stacker rollers
Stacker lever
Lever
Belts
26
• While lifting up the stacker rolls with your hand,
pull the levers (left and right) attached to the
stacker lever in the direction of the arrow, and
adjust so that the stacker rolls are above the belt.
Stacer roller
Stacer lever
Lever
Belt
öSet the folding mode to “Double fold”.
õPress the “test” button and test the folding.
Check if the paper is ejected smoothly.
úIf the paper is not ejected smoothly, change the
position of the stacker rolls.
While pressing the “clear” button, press any
numerical key between “3” and “6” and adjust the
stacker rolls to the best position.
27
ùIf there is folding slippage, adjust the stopping
position of the folding stopper with the adjusting
button of folding plate 1 or 2.
ûAfter completing all adjustments, press “special
folding” registration 1 or 2 and register this special
folding method.
Note : If a special folding method had been
registered before, registering the new
method will erase the previous
registration data.
üPress the numerical buttons and input and set the
number of sheets to be folded.
†Press the “start/stop” button and begin folding
operations.
28
°After the operations have completed, be sure to
lower the left and right levers attached to the
stacker lever in the direction of the arrow.
If the stacker rolls are left lifted up, problems will
occur when “folding mode” is executed with the
usual paper quantity.
Stacker rollers
Lever
Belts
Stacker lever
7-4. SPECIAL FOLDING OF FIXED PAPER
Start special folding operations for fixed paper as follows.
1
Stack some paper on the paper feed
table.
Paper
Paper set lever
2
Fold the paper as desired and
measure the folded paper. Adjust the
position of the folding stopper of the
folding plate accordingly.
Accordion fold
• The figure on the right shows an example of an
accordion fold.
29
3
For measurement A, press the
“folding plate 1” adjusting button and
move the folding stopper of the first
folding plate to the corresponding
position.
• For measurement B, press the “folding plate 2”
adjusting button and move the folding stopper of
the second folding plate to the corresponding
position.
• When carrying out special folding, folding sizes
should be within the following ranges.
Folding range (A) for first folding plate:
38mm to 325 mm
Folding range (B) for second folding plate:
40mm to 216mm
Max. paper length when folded (C):
216mm
4
Next fix the stopping position of the
stacker rollers.
• Press the (1 to 7) on the keypad with the clear
button held down and move the stacker rollers.
• The stopping position of the stacker rollers
depends on the length of the paper fold.
Refer to the following table “Stacker Roller
Positions” when pressing the keyson the keypad.
Stacker roller
30
Number
5
Length of Paper Fold
Folding Mode
1
40—91 mm
B6: Single Fold, Double Fold, Letter Fold, Accordion Fold, Irregular
Accordion Fold, Letter Fold
A5: Double Fold, Letter Fold, Accordion Fold
B5: Double Fold, Letter Fold, Accordion Fold
A4: Double Fold
B4: Double Fold
2
91—105 mm
A5: Single Fold, Irregular Accordion Fold, Brochure Fold
A4: Letter Fold, Accordion Fold
A3: Double Fold
3
105—128.5 mm
B5: Single Fold, Irregular Accordion Fold, Brochure Fold
B4: Letter Fold, Accordion Fold
4
128.5—148.5 mm
5
148.5—182 mm
6
182—210 mm
7
210—216 mm
Bigger than A3, Single Fold
Next, press the “special folding”
registration button 1 or 2 to
temporarily register it.
• The “special folding” display lamp 1 or 2 lights up.
Up to two types of special folding can be
registered.
6
Press the “test” button and carry out
test folding.
• Check the fold of the paper.
31
7
If there is folding slippage, adjust the
stopping position of the folding
stopper.
• Press either the “folding plate 1” or “folding plate
2” button to adjust the stopping position of the
folding stopper.
8
If the paper is not ejected smoothly,
adjust the stopping position of the
stacker rollers properly.
• Press the keys on the keypad to adjust the stopping
position of the stacker rollers with the clear button
held down.
9
32
Press the “test” button and check
how the papers are ejected.
10
After completing all adjustments,
press “special folding” registration 1
or 2 button.
• When registration button 1 is pressed, the folding
method will be registered in special folding mode
1.
• When registration button 2 is pressed, the felding
made it will be registered in special folding mode
2.
• This completes the registration of special folding.
• When a new special folding method is registered,
the data previously registered will be erased.
Once the values have been registered, they
will be kept even after the power is turned off.
To erase the registration
ó Select “special folding” display lamp 1 or 2 that is to
be erased with the “ folding mode selection” button.
ò Next, press the “special folding registration” button
until the buzzer sounds.
The “special folding” display lamps turns off,
indicating that the registration has been erased.
11
Press the keys on the keypad to input
the number of sheets to be
processed.
• Next, proceed onto “Operation Procedures” on
page 19.
33
7-5. CALLING THE REGISTRATION
• When folding is to be carried out using the data
that was registered during the special folding
process, press the “folding mode selection” button
and select the registered special folding mode,
1 or 2.
• If no registrations had been made previously, the
special folding mode cannot be selected.
• The special folding mode cannot be selected even
if “special folding” registration button 1 or 2 is
pressed.
• In “special folding” registration, the positions of
the folding stopper (folding plate 1 or 2) and the
stacker rolls can be memorized.
7-6. SWITCHING THE MODE USED
1
Switching from fixed to non-fixed
paper
óPress the “Number of sheets/paper length” button
and switch to the mode for non-fixed paper (length
input mode).
• If measurements had been registered previously,
these will be displayed on the display window.
34
òMeasure the length of the paper to be used, and
input its length using the numerical keys.
• If the measurements previously registered and
currently being displayed are not to be used, press
the “clear” button, erase these measurements, and
input the desired measurements.
Note : Take note that desired measurements
cannot be input if the previous
measurements registered have not been
erased.
When new measurements are input, the
registration of the fixed folding correction
using the previous measurements will be
erased.
• When the measurements being displayed are to be
used, there is no need to input the measurements
again.
ôContinue pressing the “Number of sheets/paper
length” button until the buzzer sounds.
• The display changes to the paper length folding
mode, indicating that operations can be started.
• When non-fixed paper is to be used, the unit cannot
be operated until the paper size display window
shows “LP”.
2
Precautions For Selecting The
Folding Mode
137 to 157mm
• If non-fixed paper of 137 to 157 mm is used, it
cannot be folded in the double fold, irregular
accordion fold, and brochure fold styles.
Double fold
Irregular
Brochure fold
accordion fold
35
8. FOLDING ADJUSTMENTS AND REGISTERING CORRECTIONS
8-1. ADJUSTING THE FOLDING SLIPPAGE IN THE VERTICAL DIRECTION
To adjust the folding slippage in the vertical direction, press the “folding stopper
adjusting” button.
Folding Style
Fold Surface A
Adjustment
When A
is longer
Press the left button
When A
is shorter
Press the right button
When A
is longer
When A
is shorter
When A
is longer
When A
is shorter
When A
is longer
When A
is shorter
When A
is longer
When A
is shorter
When A
is longer
When A
is shorter
Single Fold
Double Fold
Irregular
Accordion Fold
Letter Fold
Accordion Fold
Brochure Fold
36
Folding Plate 1
Adjusting Button
Folding Style
Fold Surface B
Adjustment
When B
is longer
When B
is shorter
When B
is longer
When B
is shorter
When B
is longer
When B
is shorter
When B
is longer
When B
is shorter
When B
is longer
When B
is shorter
Folding Plate 2
Adjusting Button
Double Fold
Irregular
Accordion Fold
Letter Fold
Accordion Fold
Brochure Fold
37
8-2. REGISTERING THE FOLDING STOPPER CORRECTION
(1)
(2)
(3)
Use this correction registration function to memorize the position of the folding
stopper after adjusting the folding slippage in the vertical direction.
This function is extremely useful when folding the same type of paper (size, type,
thickness) at the same folding speed.
Corrections can be registered in every folding mode.
Up to 36 types of correction registrations are possible. However, take note that
corrections cannot be registered in the special folding mode. (This will only
register the special folding method again.)
1
Specify the folding mode.
2
Perform test folding.
3
Press the “folding stopper adjusting”
button to adjust the folding slippage.
38
4
After adjusting folding slippage,
continue pressing the “fixed folding
correction” button until the buzzer
(pi, pi, pi) sounds.
• When the value of the folding stopper correction is
registered, the display lamp of the specified
folding mode will start blinking.
Once the value of the folding stopper
correction is registered, it will be kept even
after the power is turned off.
To change the correction
value
•
Carry out the procedure for registering corrections.
To erase the registration
•
Continue pressing the “fixed folding correction”
button until the buzzer sounds pi, pi, pi and changes
to pi.... (takes about 5 seconds).
When the registration is erased, the fixed folding
display lamp stops blinking.
•
39
8-3. ADJUSTING THE FOLDING SLIPPAGE IN THE HORIZONTAL DIRECTION
• If folding slips as shown in the figure because the
paper is not cut straight, rotate the “slant
correction” knob to adjust the folding slippage.
1
Rotate the “slant correction” knob to
adjust the folding slippage.
• If folding slippage is as shown in Fig. A, rotate the
knob in the direction of the arrow.
• If folding slippage is as shown in Fig. B, rotate the
knob in the direction of the arrow.
2
After using, be sure to rotate the
“slant correction” knob to adjust the
round holes of the paper feed table to
the pin.
Round
hple
Pin
• The position at which the round hole meets the pin
is the standard position.
40
9. USING ART/COATED PAPER
•
•
Art/coated paper are difficult to fold as their printed surfaces tend to stick together
easily and cause double feeding.
When folding such a kind of paper, observe the following precautions before starting
folding operations.
9-1. PRECAUTIONS FOR STACKING PAPER
1
Loosen the paper thoroughly.
2
Next arrange the paper neatly and
stack them on the paper feed table.
Paper
Paper set lever
3
For other precautions, refer to
“Precautions for Stacking Paper” on
page 16.
41
9-2. OPERATING PRECAUTIONS
If double-feed occurs frequently and
cannot be corrected, reduce the
amount of paper on the paper feed
table until the middle of the guide
(approx. 25mm)
As the specific gravity of this type of paper is
higher than that of normal paper, they tend to
stick together, causing double-feeding to
occur frequently.
The amount of paper loaded on the table is
therefore reduced.
2
Guide
Paper
25mm
1
• If the paper slips, gradually raise the paper feed
pressure one level at a time , from “3” to “4”, until
the appropriate paper feed pressure is obtained.
• When the paper slips, the display shows “- ¡-”
and the unit will stop. Raise the paper feed pressure
one level when the unit stops.
Set the paper feed pressure within the range
of 3 to 5.
3
Next, open the top cover and adjust
the separator pressure.
• Set the separator pressure adjusting dial to “2.5”.
• If the paper sticks and several sheets of paper are
fed at one time (double feeding), gradually raise
the separator pressure adjusting dial 0.5 at a time
until the appropriate separator pressure is obtained.
Set the separator pressure within the range of
2.5 to 3.5.
• The separator pressure may have to be set to 3.5 or
above if the paper feed ring or paper separator, etc.
is worn out.
But try to set the pressure at the lowest level
possible.
42
4
If the paper is not folded properly,
adjust the speed control to a slower
speed.
When paper is folded at a high speed, as the
front edges of the paper cannot reach the
folding stopper due to various conditions such
as environmental conditions (temperature,
humidity), paper size, thickness of paper,
paper couch conditions, and printed surface
conditions, etc., the paper is not folded
properly.
5
From here, carry out the usual
procedures.
• Refer to “Operation Procedures” on page 19.
43
10. USING NON-FIXED PAPER
9-1. ŁFOLDING
‘
Ł
g p
Ł
10-1. FIXED
PROCEDURE
Start fixed folding operations for non-fixed paper according to the following procedure.
1
Press the “Number of sheets/paper
length” button and set the paper
length input mode.
• When the paper length input mode is set, the
“paper size” and “Number of sheets/paper length”
display windows will display as shown in the
figure.
Take note that when non-fixed paper is used
in modes normally used, the paper size
automatic detection function operates and the
unit will stop.
2
Next, measure the length of the paper
to be used, and input the length on
the keypad.
• Paper lengths that can be input range from
minimum 135mm to maximum 432mm.
• Use measuring instruments which are in mm.
• To input 135, press numerical button [1] [3] and
then [5].
• To input 432mm, press numerical buttons [4],[3],
and then [2].
When using paper which are 135mm to 152
mm long, the folding modes-double folding,
irregular accordion folding, brochure folding,
etc.-cannot be selected as such paper are too
big for the folding plate to fold them into these
styles.
If the paper length has already been
registered, press the “clear” button to erase
the value registered first before inputting.
44
3
Register the paper length input.
• Continue pressing the “Number of sheets/paper
• The “paper size” and “Number of sheets/paper
length” display windows will switch to the paper
length folding mode display shown in the figure.
The paper length registered will be kept even
after the power is turned off.
4
processed.
• From here, carry out the usual procedures.
Refer to “Operation Procedures” on page 19.
Folding stopper corrections can be registered in the paper length folding mode as well. (As well as the six types
of fixed folding modes). However, take note that if the paper length is changed, the previous correction value
memorized will be erased.
5
When using fixed paper again, press
the “Number of sheets/paper length”
button.
• The normal operation mode will be set.
45
10-2. SPECIAL FOLDING PROCEDURES
1
Press the “Number of sheets/paper
length” button and set the paper
length input mode.
• When the paper length input mode is set, the
“paper size” and “Number of sheets/paper length”
display windows will display as shown in the
figure.
Take note that when non-fixed paper is used
in modes normally used, the paper size
automatic detection function operates and the
unit will stop.
2
Next, measure the length of the paper
to be used, and input the length on
the keypad.
• Paper lengths that can be input range from
minimum 135mm to maximum 432mm.
• Use measuring instruments which are in mm.
If the paper length has already been
registered, press the “clear” button to erase
the value registered first before inputting.
3
length folding mode shown in the figure.
4
Stack some sheets of paper on the
paper feed table.
Paper
Paper set lever
46
5
Fold the paper as desired and
measure the folded paper. Adjust the
position of the folding stopper of the
folding plate accordingly.
Accordion fold
• The figure on the right shows an example of an
accordion fold.
• For measurement A, press the “folding plate 1”
the first folding plate to the corresponding
position.
• For measurement B, press the “folding plate 2”
the second folding plate to the corresponding
position.
• When carrying out special folding, folding sizes
should be within the following ranges.
Folding range (A) for first folding plate:
40 to 325mm
Folding range (B) for second folding plate:
40 to 216mm
Max. paper length when folded (C): 216mm
6
Next fix the stopping position of the
stacker rollers.
• Press the keys (1 to 7) on the keypad to move the
stacker rollers with the clean button held down.
47
• The stopping position of the stacker rollers
depends on the length of the paper fold.
Refer to the following table “Stacker Roller
Positions” when pressing the keys on the keypad.
Stacker roller
Number
7
Length of Paper Fold
Folding Mode
1
40—91 mm
B6: Single Fold, Double Fold, Letter Fold, Accordion Fold, Irregular
Accordion Fold, Letter Fold
A5: Double Fold, Letter Fold, Accordion Fold
B5: Double Fold, Letter Fold, Accordion Fold
A4: Double Fold
B4: Double Fold
2
91—105 mm
A3: Double Fold
3
105—128.5 mm
B4: Letter Fold, Accordion Fold
4
128.5—148.5 mm
5
148.5—182 mm
6
182—210 mm
7
210—216 mm
Bigger than A3: Single Fold
Next, press “special folding”
registration button 1 or 2 to
temporarily register it.
• The “special folding” display lamp 1 or 2 lights up.
Up to two types of special folding can be
registered.
48
8
Press the “test” button and carry out
test folding.
• Check the fold of the paper.
9
If there is folding slippage, adjust the
stopping position of the folding
stopper.
• Press either the “folding plate 1” or “folding plate
2” adjusting button to adjust the stopping position
of the folding stopper.
10
If the paper is not ejected smoothly,
adjust the stopping position of the
stacker rollers.
• Press the keys on the keypad to adjust the stopping
position of the stacker rollers with the clear button
held down.
11
Press the “test” button to check how
the papers are ejected.
49
12
After completing all adjustments,
continue pressing “special folding”
registration 1 or 2 button until the
buzzer (pi, pi, pi) sounds.
• This completes the registration of special folding.
Once the values have been registered, they will be
kept even after the power is turned off.
• To Cancel the Registration
Continue pressing “special folding” registration 1 or 2
button until the buzzer sounds pi, pi, pi and changes to
pi.... (takes about 5 seconds).
13
processed.
14
From here, carry out the usual
procedures.
Refer to “Operation Procedures” on page 19.
50
11. CROSS FOLDING
•
•
As shown in the figure, cross folding
means folding paper already folded into
two parts into twos again, threes, or in
other ways.
Paper can be cross folded into various
shapes depending on use.
Folded
Cross single
folding
Cross letter
folding
11-1. PRECAUTIONS UPON USE
(1)
The maximum paper thickness is 105 g/m2. However, this thickness may differ slightly
according to various conditions such as environmental conditions (temperature,
humidity), paper size, type of paper, paper couch conditions, and printed surface
conditions.
(2)
When the paper is cross folded, ∑
shape folding, folding slippage in the
horizontal direction may occur due to
conditions such as environmental
conditions (temperature, humidity),
paper thickness, paper size, type of
paper, paper couch conditions.
Therefore do not suspect a fault.
∑ shape folding
51
11. CROSS FOLDING
11-2. CROSS FOLDING FIXED PAPER
•
•
The following describes the cross
folding shown in the figure and the
procedures for it.
Start cross folding according to the
following procedures.
1
Set the “single fold” mode first and
fold the paper into two.
2
Set the single fold paper on the paper
feed table.
Face the folded edge of the paper as
shown in the figure (back of unit).
• To prevent folding slippage in the horizontal
direction and misfeeding, press the folded edge of
the paper with your hand firmly.
36mm
The amount of paper that can be folded is
approximately 2/3 (approx. 36mm) of the
height of the guide at the folded side.
Paper
52
11. CROSS FOLDING
3
Open the top cover and move the
paper feed ring at the far end to the
folded edge of the paper.
Paper feed ring(For moving)
• Loosen the set screw and move the paper feed ring.
• After moving the paper feed ring, tighten the set
screw properly.
Set knob
4
Adjust the separator adjusting dial to
“0”.
• When double fed occurs, gradually raise the
separator pressure by 0.5 until the appropriate
separator pressure is obtained.
Set the separator pressure to the lowest level
possible before use.
5
Lower the paper set lever.
White pressing the back edges of the
paper.
Paper
• Adjust so that the front part of the paper touches
the paper feed ring in front lightly.
Paper set lever
6
Close the top cover and adjust the
cross folding lever to the guide.
Cross folding lever
Top cover
• Place the weight rollers at the tip of the lever on top
of the folded edge.
Weight roller
53
11. CROSS FOLDING
7
• When the paper slips or non-feed occurs, raise the
paper feed pressure one level at a time until the
optimum paper feed pressure is obtained.
Set the paper feed pressure within the range
of 3 to 6.
• When the paper slips and the unit stops, gradually
raise the paper feed pressure one level at a time.
• When the paper slips, the display window shows
[- 1-].
8
From here, refer to “Operation
Procedures” on page 19.
Cross folding lever
• When replenishing paper, raise the cross folding
lever as shown in the figure first.
Cross folding consists of not only the single
folding of B4, double folding of B5, but the
letter folding of B5.
11-3. CROSS FOLDING UN-FIXED PAPER
1
First set the paper length input mode
and measure the length of the paper.
If the paper length is 360mm for
example, input this value on the
keypad.
Refer to “10-1. FIXED FOLDING
PROCEDURE” on page 44.
2
54
11. CROSS FOLDING
3
Next, set the single fold mode and
perform test folding.
• Make sure that the paper has been folded properly.
4
the number of sheets to be folded,
and start single folding.
If the number of sheets to be folded is 520
sheets for example, press the keys on the
keypad to input this value.
5
Face the folded edge of the folded
paper as shown in the figure and load
it onto the paper feed table.
Paper
Paper set lever
6
Press the “Clear” button to erase
previous values.
55
11. CROSS FOLDING
7
Measure the length of the paper that
has been folded into two, and input
this value again.
If the length is 180mm for example, input this
value on the keypad.
8
length” button until the buzzer sound.
9
Next, set the single folding mode.
10
Press the “test” button to make sure
that the paper has been folded
properly.
56
11. CROSS FOLDING
11
the number of sheets to be folded.
Next start folding operations.
• Paper will be folded according to the procedures
described above.
For details of other procedures, refer to “Operation
Procedures” on page 19.
When using fixed paper, press the “Number of
sheets/paper length” button.
The normal mode will be set.
To cross fold un-fixed paper freely, fold the un-fixed paper into two using fixed folding procedures. Next set the
positions of the folding stopper and stacker rollers by carrying out un-fixed folding of un-fixed paper, register
special folding and have the unit record it, and start cross folding. For details, refer to “FIXED-FOLDING OF
UN-FIXED PAPER” and “SPECIAL FOLDING OF UN-FIXED PAPER”.
12. TROUBLESHOOTING
12-1. PAPER HAS JAMMED NEAR THE PAPER FEED RING
1
The “Number of sheets/paper length”
display window will show “- l-”.
2
Raise the paper set lever and lower
the paper feed table.
Pull the jammed paper towards you.
Paper set lever
57
12. TROUBLESHOOTING
12-2. PAPER HAS SLIPPED NEAR THE PAPER FEED SECTION
1
2
Increase the paper feed pressure.
• Raise the paper feed pressure adjusting lever one
level at a time.
While observing the paper feed condition.
12-3. PAPER HAS COILED AROUND THE RUBBER ROLL INSIDE THE UNIT
1
If the paper has coiled around the
rubber roll, pull folding plates 1 and 2
to the stopper.
2
Open the top cover, and Pull the
coiled paper towards you to remove it
while rotating the jam correction
handle.
• If the paper cannot be removed easily, insert a
scale, etc. from between the rubber rolls into the tip
of the paper which has coiled around the lower
rubber roll, and while rotating the jam correction
handle, remove the paper.
58
Jam correction handle
Paper
Rubber roll
12. TROUBLESHOOTING
12-4. PAPER HAS JAMMED AT THE FIRST FOLDING PLATE
1
2
Turn off the power and disconnect
control cord 1.
Control cord 1
Be sure to turn off the power first when
inserting and disconnecting the control cord or
the unit will be damaged.
3
Release the lock of the first folding
plate and remove this plate.
Lock lever
First
folding plate
4
Open the top cover and pull the
jammed paper towards you to
remove.
59
12. TROUBLESHOOTING
5
After removing the paper, return the
folding plate and top cover to the unit.
Lock lever
Lock the folding plate and insert control cord 1.
Top cover
Check that the folding plate has been set
correctly.
Always remove and return folding plates with
both hands.
First
folding plate
12-5. PAPER HAS JAMMED AT THE SECOND FOLDING PLATE
1
2
Turn off the power and disconnect
control cord 2.
Be sure to turn off the power first when
inserting and disconnecting the control cord or
the unit will be damaged.
3
Control cord 2
Release the lock of the second
folding plate and remove this plate.
Lock lever
60
Second
folding plate
12. TROUBLESHOOTING
4
Pull the jammed paper towards you to
remove.
5
After completing operations, slide the
folding plate along the slider and
return it to its original position.
Slider
Control cord 2
Lock lever
Make sure that the folding plate has been set
correctly.
Always remove and return folding plates with
both hands.
Second
Lock the folding plate and insert control cord 2.
Be sure to turn off the power first when inserting and
disconnecting the control cord.
folding plate
61
12. TROUBLESHOOTING
12-6. PAPER HAS JAMMED NEAR THE STACKER
1
display window will show “- 2-”.
2
Pull the jammed paper in the stacker
section towards you to remove.
Paper receiving tray
62
13. EMERGENCY STOPS
An emergency stop device to ensure safety has been, or first folding plates and second
forlding plates installed to the top cover of this unit. Take note that this emergency stop
device will function as follows.
(1)
If the top cover is open while the unit
is operating, the “Number of sheets/
paper length” display window will
OPE ”, and the unit will stop
show “OPE
promptly.
(2)
If the “test” or “start/stop” button are
pressed with the top cover open, or if
first folding plates and second
folding plates are not promptly set,
the “Number of sheets/paper length”
display window will also show
OPE ” and the unit will not start.
“OPE
(3)
When the top cover is closed or the
first and second folding plates are set
properly, the unit will be released
from the emergency stop state.
After closing the top cover, press the ''TEST"
button and check that the unit operates
properly.
Top cover
First
folding plate
Second
folding plate
63
14. ERROR MESSAGES
•
•
This unit has a self-diagnosing function which will display the following error
messages when problems arise while the unit is operating.
When error messages are displayed, refer to the following countermeasures.
Display
Check
Correct
No paper on the paper feed
table.
Load some sheets of paper.
Paper has become stuck at the
paper feed section.
Remove the paper.
Paper has slipped at the paper
feed section.
Raise the paper feed pressure by
one level.
rubber roll section or has coiled
around it.
Remove the paper.
folding plate.
Remove the paper.
stacker section.
Remove the paper.
“Err1” is displayed when the
“test” or “start/stop” button is
pressed.
stacker section.
Remove the paper.
“Err2” is displayed when the
“test” or “start/stop” button is
pressed.
Paper feed table is facing down.
Stacker motor has locked due to
overload.
Lower the paper set lever and set
so that the paper feed table faces
up.
Turn off the power and correct
the cause of the lock.
Contact your serviceman.
64
14. ERROR MESSAGES
Display
Check
First folding plate motor has
locked due to overload.
Correct
Turn off the power and correct the
cause of the lock.
Isn't the control cord for first
folding plate disconnected?
Second folding plate motor has
locked due to overload.
Turn OFF the power and insert
the control cord in the connector.
Turn off the power and correct the
cause of the lock.
Isn't the control cord for first
folding plate disconnected?
Turn OFF the power and insert
the control cord in the connector.
Top cover is open.
Close the top cover.
Isn't first or second folding plate
incompletely engaged?
Reset first or second folding
plate in fully engaged position.
Didn't you turn ON the power
when the control cord of the
folding plate was disconnected?
• Turn OFF the power.
• Turn ON the power after having
connected the control cord to
the connector.
65
15. TROUBLE SHOOTING GUIDE
Problem
(1) The unit does not start when
the start button is pressed.
Check
Correct
ó Is there paper on the paper
•
Load some sheets of paper.
ò Does the paper feed plate
•
Lower the paper set lever and
set the paper feed plate so
that it faces up.
ô Is the paper on the paper feed
•
Set the paper properly.
ö Is the paper stuck?
•
Remove the paper.
õ Is the top cover open?
•
ú Is un-fixed paper used?
•
ù The paper feed guide is not
Refer to “USING UN-FIXED
PAPER” and input the paper
length.
•
Adjust the guide properly to
the paper width.
û Has
•
ü Is the control cord of folding
•
Turn off the power and insert the
control cord.
•
Press the black button of the
breaker (power returns).
feed plate?
face down?
table set properly on the
paper switch?
adjusted properly to the paper
width.
problems occurred
inside the unit?
plate 1 or folding plate 2
disconnected?
(2) The main motor does not
rotate.
ó Has the breaker turned on
and cut off the power?
*
This breaker cuts off the power temporarily when the motor malfunctions
because of paper jams and other problems.
Identify the cause, ensure safety and press the black button of the breaker.
ò Is the top cover open?
ô Has problems occurred
inside the unit?
(3) The folding stopper of the
folding plate does not work.
ó Is the control cord of the
problems occurred
inside the unit?
ó Is
the folding plate set
properly?
ò Environmental conditions
such as static electricity, etc.
may be the cause.
ô Is the control cord of the folding
plate disconnected?
66
•
•
Insert the control cord
properly.
•
•
Position the folding plate
properly.
•
Lower the folding speed.
folding plate inserted?
ò Has
(4) The paper is not folded at the
proper folding position.
•
•
Insert the control cord.
Problem
Check
(5) Double feed occurs frequently.
ó Is the paper feed pressure too
•
Lower the paper feed pressure
gradually until the optimum
pressure is obtained.
ò Is the separator pressure too
•
Raise the separator pressure
ô Is the paper separator dirty?
•
Clean with neutral detergent or
alcohol.
ö Are the sheets of paper sticking
•
Loosen the paper properly and
load on the paper feed table.
õ Is paper outside the specified
•
Do not use such a kind of paper
as they will cause problems.
ú Has problems occurred inside
•
ó Is the paper feed pressure too
•
Raise the separator pressure
ò Is the separator pressure too
•
Lower the separator pressure
ô Is the paper feed ring dirty?
•
alcohol.
ö Are the sheets of paper sticking
•
Loosen the paper properly and
load on the paper feed table.
õ Is paper outside the specified
•
Do not use such paper as they
will cause problems.
ú Has problems occurred inside
•
•
alcohol.
•
Check inside the unit and
remove any paper shreds.
•
Re-set the position of the
stacker roller.
•
Straighten the curl before use.
•
Use an anti-static electricity
spray available on the market.
Correct
high?
low?
to each other and cannot be
separated?
sizes used?
the unit?
(6) Paper slips frequently.
low?
high?
to each other and cannot be
separated.
sizes used?
the unit?
(7) Paper jams frequently.
ó Is the rubber roll dirty?
ò Are
paper shreds stuck inside
the paper conveyance
passage?
ô The stacker roller position is not
correct if special folding is being
carried out.
ö Is the paper curled?
õ Due to static electricity.
67
Problem
Check
Correct
•
Adjust each folding stopper
finely.
•
Use the original speed.
finely again.
ò Was the paper type (quality,
•
finely again.
ó Is
•
Stack the paper neatly on the
paper feed table.
•
Adjust the guide firmly against
the paper.
•
Rotate the slant correction
knob and correct the folding
slippage.
ó Is paper outside the specified
•
Do not use such paper as they
will cause problems.
ò Is
the space inside the
internal paper conveyance
passage narrow?
•
Press the folding stopper
adjusting button of the second
folding plate twice and move
the folding stopper to the right.
ó Is small paper outside the
•
Do not use such a kind of
paper as they will cause
problems.
ò Is the paper feed pressure
•
Decrease the paper feed
pressure by 1 from the
standard (0).
•
Decrease the folding speed
until paper feeding stops.
(8) When paper slips in the
vertical direction.
ó Was the speed changed
halfway?
amount) changed halfway?
(9) When paper slips in the
horizontal direction.
the paper stacked
unevenly?
ò Is there space between the
paper and guide?
(10) Paper jam at the rubber roll
when thick paper or cross
folded thick paper is folded
into two.
(11) S m a l l p a p e r
continuously.
(Double-feed).
is
fed
sizes used?
specified sizes used?
too high?
68
16. CLEANING THE UNIT
•
•
As paper shreds, ink of printed paper on the rubber roll and paper feed ring will cause
problems, clean these parts according to the following procedures.
To ensure safety, always turn off the power of the unit first before cleaning.
16-1. CLEANING THE RUBBER ROLL
1
Open the top cover.
2
Disconnect the control cords of the
first and second folding plates.
Top cover
Control cord 1
Control cord 2
3
Push the lock levers of these plates to
''UNLOCK", and remove them.
Lock
lever
Lock
lever
First
folding plate
Second
folding plate
4
Rubber
roll
Rotate the jam correction handle and
the rubber roll. Clean off the dirt with
a cloth moistened with neutral
detergent or alcohol.
Jam correction
handle
69
16. CLEANING THE UNIT
16-2. CLEANING THE PAPER FEED RING
1
Open the top cover.
2
While rotating the paper feed ring in
the direction of the arrow with your
hand, clean it with a cloth moistened
with neutral detergent or alcohol, etc.
70
Top cover
Paper feed ring
17. SPECIFICATIONS
Model
Office use, desktop
Type
Paper size that can be
folded
Max.
297 (W) x 432 (L) mm
Min.
128 (W) x 182 (L) mm
Paper quality
Rough paper, fine quality paper, stencil paper, recycled paper,
drawing paper, thick paper art/coated paper
Folding mode
Single fold, double fold, irregular accordion fold, letter fold,
accordion fold, brochure fold, special cross fold (paper thickness:
52.3 to 105g/m2), other special folds
Paper thickness
52.3 to 157g/m2, but four-folding cannot be done for A3 up to 128
g/m2, and for paper sizes below B6 of 157g/m2
Loading capacity of paper feed table
500 sheets (Fine quality paper, 64g/m2)
Processing speed
45 to 120 sheets/min. (For single folding 64g/m2 of fine quality B4
paper)
Paper feed method
3 rings, automatic paper separation method, slant correction
device
Paper size detection function
Automatic detection of fixed paper sizes (A3,B4,A4,B5,A5,B6)
Mis-feed detection function
Detection of non-feed, paper jam, etc.
Counter
4-figure digital counter display, addition/subtraction system
selectable
Moving the folding stopper
Automatic setting
Moving the stacker roller
Automatic setting
Other detections
Top cover open/close detection, paper jam detection at the
ejection section
Various error messages are displayed on the control panel
Additional functions
Folding stopper correcting registration function (36 kinds), special
folding registration function (Max. 2 kinds), Paper length folding
mode
Power
230V • 50Hz
In storage
790 (W) x 490 (D) x 525 (H) mm
In use
920 (W) x 490 (D) x 525 (H) mm (MAX)
Dimensions
Mass
33 kg
Specifications and dimensions are subject to change without prior notice.
71
72
96V-92013

Duplo Folder

Transcription

Similar documents

Ad for user Orgill (KELSEYVILLE LUMBER)

Brochure

CLAX, THE CLEVER FOLDING CART!

Dining room Functionality

The New Trimaran -TNT 34 C (Cruiser)

Table Cloths, Table Runners and Table Covers

table cloths, table runners, table covers

Vertical Cartoner

FlexFold AT180/AT230 product brochure here