5105 Portable Mixer - Hammermill LIST PRICES

Transcription

Art's Way Manufacturing Co., Inc.
Armstrong, IA 50514-0288
712-864-3131
2010-2011
5105 Portable Mixer - Hammermill
LIST PRICES
Ordering Instruction
-Order base machine, selections and options by code number and description
Standard Features
-105 Bushel tank capacity
-20" HammerMill with air system
-Reversible hammers
-Three large inspection windows in tank
-Tongue jack and safety chain
-Spring loaded tank lid
-Ladder & fenders
-10:00 x 15 8 ply tires
-8" diameter x 10' long unloading auger
Mechanical features spring loaded lift assist
Hydraulic features hydraulic lift cylinder
-Heavy duty 540 rpm implement drive line
-Ingredient supplement hopper
-Throat magnet - #4 x 18"
-29" Discharge auger
-Discharge auger hood w/spring loaded relief baffle
New and Improved Features
-Double #60 drive to mixer and discharge
-Hydraulic lift and swing features Hydraulic Cylinder
-Larger gearbox shaft and clutch shaft
-Improved brake for discharge swivel
-Tilted high speed flighting for increased
discharge rate
Selection, Base Machines
Basic Unit with Mechanical Lift & Swing Discharge Auger,
Scale Hitch & Spindles
Basic Unit with Hydraulic Lift & Swing Discharge Auger,
Scale Hitch & Spindles
Scale Hitch & Spindles, Installed Hydraulic Auger Feeder
Scale Hitch & Spindles, Installed Hydraulic Auger Feeder
NOTE: Order electronic scale indicator from the Scale Indicator section.
Order hammermill screens from the Hammermill Screen section.
Options (Dealer Installed) Not required to complete machine
Roll Feed for 20" Hammermill with Hyd. Auger Feeder - Mech.or Hyd. Lift
Roll Feed for 20" Hammermill without Hyd. Auger Feeder - Mech. Lift
Roll Feed for 20" Hammermill without Hyd. Auger Feeder - Hyd. Lift
3' Folding Extension
3' Bolt On Extension
Highway Light Kit
Field Kit, Auger Feeder for 20" HammerMill
Hydraulic Package for Field Kit Auger Feeder
Prices F.O.B Armstrong, IA
Subject to Change Without Notice
Page 1 - 5105 Grinder Mixer
CODE
NUMBER
SUGGESTED
LIST PRICE
560310
$28,397
560320
$31,799
560330
$31,526
560340
$35,201
CODE
NUMBER
SUGGESTED
LIST PRICE
367460
367200
458430
528770
528780
528790
528800
486730
408590
367420
$1,836
$1,950
$2,280
$726
$779
$218
$400
$426
$3,667
$312
Effective 10-1-10
Revision E
712-864-3131
2010-2011
6520 Portable Mixer - Hammermill
LIST PRICES
Standard Features
-165 bushel tank capacity
-One piece 26" hammer mill with air system
-Double knives - 4-Way reversible
-Self contained hydraulic system
-Hydraulic discharge drive
-10" diameter x 10' long high capacity unloading
auger with hydraulic lift cylinder
-Remote control operation
-13.50 x 16.1 8 ply tires
-Three large inspection windows
-Ladder & fenders
-Heavy duty implement drive line
-Throat magnet - #4 x 24"
-Highway lights
Basic Unit with 540 rpm Drive, Scale Hitch & Spindles
Installed Hydraulic Auger Feeder
Installed Hydraulic Auger Feeder
NOTE: Order electronic scale indicator from Scale section
Order hammermill screens from the Hammermill Screen section
Roll Feed for 26" Hammermill w/Hydraulic Auger Feeder-Hyd. Lift & Swing
Roll Feed for 26" Hammermill w/o Hydraulic Auger Feeder-Hyd.Lift & Swing
3' Folding Extension w/tilted flighting
3' Bolt On Extension w/tilted flighting
Support Arm for Scale Indicator
Field Kit, Auger Feeder for 26" Hammermill
Hydraulic Package for Field Kit Auger Feeder
Prices FOB Armstrong, IA 50514
1 - 6520 Portable Mixer
CODE
NUMBER
SUGGESTED
LIST PRICE
584340
$41,040
584350
584360
$44,415
$40,715
584370
$44,090
CODE
NUMBER
SUGGESTED
LIST PRICE
367190
458440
585800
584310
584400
584300
528760
584900
367420
$2,030
$2,375
$834
$895
$282
$460
$405
$3,750
$312
Effective 10-1-10
Revision A
712-864-3131
2010-2011
CATTLEMAXX 5105
LIST PRICES
Standard Features
-20" heavy duty rollermill
-Roll cleaner
-Rollermill hopper magnet system
-10:00 x 15 8 ply tires
Mechanical features spring loaded lift assist
Hydraulic features hydraulic lift cylinder
-Ladder and fenders
-Discharge lift assist and brake
-29" vertical discharge auger
-Feed inspection tube under rollermill
Scale Hitch and Spindles, Installed Auger Feeder
Order Rolls, Roll Speed Differential from below.
Selection, 20" Rollermill Rolls - Must Choose 2
20" Roll, 5 groove flat
20" Roll, 5 groove sharp
Selection,20" Rollermill Roll Speed Differential Drive-Must Choose
20" RollerMill Roll Speed Drive, 1:1 Belt
20" RollerMill Roll Speed Drive, 1:1.12 Belt
Deduct Auger Feeder for 20" Rollermill (Must add 463230 Cover Assy)
6' Bolt on Extension
Highway Light Kit
Prices F.O.B Armstrong, Iowa
Page 1 - CattleMaxx 5105
CODE
NUMBER
SUGGESTED
LIST PRICE
560360
$34,367
CODE
NUMBER
SUGGESTED
LIST PRICE
369680
369690
369700
396790
396830
387860
$1,195
$1,195
$1,195
$1,195
$1,195
$1,195
CODE
NUMBER
SUGGESTED
LIST PRICE
397390
397630
$773
$807
CODE
NUMBER
SUGGESTED
LIST PRICE
560350
370260DED
528770
528780
528790
528800
486730
$31,117
-$2,772
$726
$779
$218
$400
$426
Effective 10-1-10
Revision C
712-864-3131
2010-2011
LIST PRICES
CATTLEMAXX 5165 - 30" Roller Mill
Standard Features
-30" heavy duty rollermill
-Roll cleaner
-Rollermill hopper magnet system
-13:50 x 16.1 8 ply tires
-Ladder and fenders
-Discharge lift assist and brake
-52" hydraulic vertical discharge auger
-Feed inspection tube under rollermill
CODE
NUMBER
Scale Hitch and Spindles
560560
560550
Order Rolls, Roll Speed Differential from below.
Selection, 30" Rollermill Rolls - Must Choose 2
Selection,30" Rollermill Roll Speed Differential Drive-Must Choose
30" RollerMill Roll Speed Drive, 1:1 Belt
30" RollerMill Roll Speed Drive, 1:1.12 Belt
6' Bolt on Extension w/tilted flighting
Highway Light Kit
Support Arm for Scale Indicator
Prices F.O.B. Armstrong, IA 50514
1 - CattleMax 5165
SUGGESTED
LIST PRICE
$37,921
$40,887
CODE
NUMBER
SUGGESTED
LIST PRICE
370080
370090
370100
396800
396840
390400
$2,463
$2,463
$2,463
$2,463
$2,463
$2,463
CODE
NUMBER
SUGGESTED
LIST PRICE
423970
423990
$1,045
$1,082
CODE
NUMBER
SUGGESTED
LIST PRICE
528770
528780
528790
528800
486730
528760
$726
$779
$218
$400
$426
$406
Effective 10-1-10
Revision G
712-864-3131
2010-2011
HammerMill Screens
LIST PRICES
-Order Hammermill Screens by CODE NUMBER and description.
20" HammerMill Screens
1/8" Screen
5/32" Screen
3/16" Screen
1/4" Screen
5/16" Screen
3/8" Screen
1/2" Screen
5/8" Screen
3/4" Screen
1" Screen
1-1/4" Screen
1-1/2" Screen
2" Screen
26" HammerMill Screens
1/8" Screen
5/32" Screen
3/16" Screen
1/4" Screen
5/16" Screen
3/8" Screen
1/2" Screen
5/8" Screen
3/4" Screen
1" Screen
1-1/4" Screen
1-1/2" Screen
2" Screen
1 - Screens
CODE
NUMBER
SUGGESTED
LIST PRICE
004820
004830
004840
004850
004860
004870
004890
004900
004910
004930
004940
004950
004960
$172
$172
$172
$172
$172
$172
$172
$172
$172
$172
$172
$172
$172
CODE
NUMBER
SUGGESTED
LIST PRICE
157700
187630
157710
157720
157730
157740
157750
157760
157770
157780
157790
157800
157810
$230
$230
$230
$230
$230
$230
$230
$230
$230
$230
$230
$230
$230
Effective 10-1-10
Revision L
712-864-3131
2010-2011
Scale Indicators
LIST PRICES
-Order field kit by code number and description.
-Order options if applicable by code number and description
Weigh-Tronix Model 640 & 640XL
The Model 640/640XL indicators are simple Gross/Tar/Net weight indicators which include 1.1 digits on the 640,
or optional 2” on the 640XL. Included standard is an RD40/XL port. Display is LCD, 14-segment, with bright
yellow green adjustable backlighting for easy viewing regardless of lighting conditions. Operates from 12VDC
source and has selectable weight filtering, 100 accumulator memory channels, with individual statistics (count,
total, and average weight accumulated) with alpha-numeric identification of those channels.
Weigh-Tronix Model 1040
The Model 1040 indicator is a programmable batching weight indicator with a large eight-digit LCD display, 1.1”
high digits and fiber optic back-lighting for easy viewing. Additional features include; a large memory capacity
that stores up to one hundred recipes plus ingredient and completed batch records, an alarm light with
external alarm output. All setup and calibration is performed from the alpha-numeric keypad and display.
Weigh-Tronix Model 640M
The Model 640M indicator is a compact Gross/Tare/Net weight indicator which include 1.1 LCD alpha-numeric
display, with bright yellow green adjustable backlighting for easy viewing regardless of lighting conditions.
Operators from 12VDC source and has selectable weight filtering, 100 accumulator memory channels, with
individual statistics (count, total, and average weight accumulated) with alpha-numeric identification of those
channels.
Selection, Scale Indicator
CODE
NUMBER
SUGGESTED
LIST PRICES
Model 640
3 Weigh Bar, 5-pin connector w/RD 40/XL port
556670
$895
Model 640XL
3 Weigh Bar, 5-pin connector w/RD 40/XL port
556680
$1,095
Model 1040
3 Weigh Bar, 5-pin connector
5173101
$1,305
Model 640M
Single 5-pin w/RS-232 and RD40/XL port
w/3 weigh bar, 5-pin junction box
556690
$1,305
Model 640
Replacement indicator for 4-pin weigh bars
Options, Accessories
Horn, digital scale external alarm (use w/Model 1040 only)
Light, digital scale external alarm (use w/Model 1040 only)
Horn and light, digital scale external alarm (use w/Model 1040 only)
Battery Box Kit w/clamps (Less Battery)
1 - Scale Indicators
556700
$1,085
CODE
NUMBER
SUGGESTED
LIST PRICES
111880
111900
171380
135430
$196
$106
$556
$90
Effective 10-1-10
Revision L
712-864-3131
2010-2011
Universal Scales & Accessories
LIST PRICES
- Order Universal Platform Kit by code number and description.
- Order optional accessories by code number and description.
NOTE: For electronic indicator options - see "Scale Indicator" section.
Standard Features
-Accurate to 1/2% of gross weight
-Not certifiable for trade
-Plans provided for platform kits
-AC to DC converter available
-Platform kits include electronic components,
mounting and brackets only
-Platform kits do not include steel beams
-Footing pads available for kits(see scale
accessories section)
Universal Scale Systems
Universal Ag Scale Weigh Bar Kits:
Model ASU 1020, 30K Platform Scale Weigh Bar Kit,
for use with 10 ft. x 20 ft. platform
Model ASU 1030, 60K Platform Scale Weigh Bar Kit,
for use with 10 ft. x 30 ft. platform
Scale Accessories
Adaptor Plug
5 - Pin Indicator (Adapter) Plug
Power Accessories
Female Tractor Plug
Power Cord 23' Digital Indicators
Battery Box w/Clamps (less battery)
Battery Hook-up Hardware & Digital Power Cord
AC/DC Power Converter 110 VAC/12 VDC 10 Amp. 10' Wire
Alarm Light & Horn
Alarm Light w/10' Cord and Mounting Hardware
Alarm Horn w/10' Cord and Mounting Hardware
Extension Cords & Junction Box
6' Five Pin Weigh Bar Extension
10' Five Pin Weigh Bar Extension
20' Five Pin Weigh bar Extension
1 - Universal Scales and Accessories
CODE
NUMBER
SUGGESTED
LIST PRICE
223560
$1,844
223570
$2,967
CODE
NUMBER
SUGGESTED
LIST PRICE
219880
$51
036780
147060
135430
1793500
236020
$35
$64
$82
$88
$201
111900
111880
$98
$127
228861
228862
228863
$104
$107
$119
Effective 10-1-10
Revision N
712-864-3131
2010-2011
Grinder-Mixer Scale Kits
LIST PRICES
-Order field kit by code number and description.
NOTE: For optional accessories - see Scale Accessories section.
NOTE: For electronic scale indicator options - see Scale Indicator section.
Field Kit Features
-Farm machinery scale kits include power
cord and tractor plug
-Includes patented weigh bars and mounting
brackets to field install
Company Machine & Model(s)
All Scale Kits are less indicators
Art's-Way
Grinder Mixer 320, 420, 325, 425
Grinder Mixer 325A, b or C and 425A, B or C
Grinder Mixers 450, 475, PM20, PM25
Grinder Mixer 500, PM30, PM35
Silamixes 700A,800,800A (Prior to Serial #2637)
Silamixes 800A,(Serial #2637 & up) 800B, 810
Silamixes 750A, 850A (Prior to Serial #2643) 850
Silamixes 850A (Serial #2643 and up), 860
Automatic Equipment
Roller Mill/Mixers 9450, 9450E, 9475, 9475E
Case International
1150 (Below Serial #6432)
Grinder Mixers 950 (Serial #2217 and Above)
1150 (Serial #6432 and Above)
Grinder Mixer 1250
Grinder Mixer 1350
Gehl
Grinder Mixer 100, 125, 135, 170
New Holland
Grinder Mixer 355 (Serial #417525 and Above)
357 (Serial #445447 and Above), 358
Peerless
Model P5000
Model P6000
1 - Scale Kits
Code
Number
Weigh Bar
Calibration
Suggested
List Price
148475P
148485P
132225P
155822P
112085P
155782P
112105P
155822P
2-1/8"
2-1/8"
2-1/8"
2-1/8"
2-1/8"
2-1/8"
2-1/8"
2-1/8"
$1,099
$1,087
$972
$1,133
$1,186
$1,106
$1,186
$1,133
132225P
2-1/8"
$972
148485P
2-1/8"
$1,087
132225P
155822P
2-1/8"
2-1/8"
$972
$1,133
153585P
2"
$1,241
149525P
2-1/8"
$1,620
132225P
155822P
2-1/8"
2-1/8"
$972
$1,133
Effective 10-1-10
Revision M
712-864-3131
2010-2011
26" Stationary Hammermill
LIST PRICES
Standard Features
-Heavy-duty hammers
-Stable auger out base
-Magnets
-Air system
26" Hammermill w/air system
(Requires 40-60hp electric motor - NEMA frames 324T, 326T,
364T & 365T) (Drive lines are included in PTO drive option)
Selection, Drives (Must choose one)
Drive, 26" Hammermill electric (must choose pulley)
Drive, 26" Hammermill 1000 PTO
Selection, Motor Pulley w/Bushing
(Must choose one with electric drive option)
8 Gr. Motor pulley for electric drive
NEMA frame 286T (1-7/8" shaft)
8 Gr. Motor pulley for electric drive
NEMA frame 324T & 326T (2-1/8" shaft)
Selection, Screens for 26" Hammermill
1/8" Screen
5/32" Screen
3/16" Screen
1/4" Screen
5/16" Screen
3/8" Screen
1/2" Screen
5/8" Screen
3/4" Screen
1" Screen
1-1/4" Screen
1-1/2" Screen
2" Screen
1 - Stationary Hammermill
CODE
NUMBER
SUGGESTED
LIST PRICE
CODE
NUMBER
SUGGESTED
LIST PRICE
CODE
NUMBER
SUGGESTED
LIST PRICE
410220
$257
CODE
NUMBER
SUGGESTED
LIST PRICE
157700
187630
157710
157720
157730
157740
157750
157760
157770
157780
157790
157800
157810
$230
$230
$230
$230
$230
$230
$230
$230
$230
$230
$230
$230
$230
400430
374170
377380
410210
$6,754
$2,398
$4,352
$257
Effective 10-1-10
Revision L
712-864-3131
2010-2011
10" Stationary RollerMills
LIST PRICES
Standard Features
-Cast iron split side frames
-Cast iron 10" diameter rolls
-Continuous running agitator for uniform feed flow
-Easy set eccentric roll gap adjustment
-Roll cleaners
CODE
NUMBER
SUGGESTED
LIST PRICE
10" RollerMill, adjustable mill stand, flared hopper
drive kit (P10305 B75), motor mount
Must choose motor drive hub
Must choose rolls, roll speed differential
441920
$8,694
10" RollerMill, 5" auger base, flared hopper, electric
drive kit (P10305 - B75), motor mount,
441930
$8,917
10" RollerMill, 5 x 5 45 degree base, flared hopper,
drive kit (P10300 - B65), 5 x 5 unload auger
441940
$9,679
CODE
NUMBER
SUGGESTED
LIST PRICE
374000
374010
374020
396780
396820
390390
390380
$991
$991
$991
$991
$991
$991
$991
10" RollerMill, flared hopper, drive kit (P10305 B75),
motor mount
Selection, 10" Rollermill Rolls (Must Choose Two)
1 - 10" Roller Mill
441910
$7,826
Effective 10-1-10
Revision P
712-864-3131
2010-2011
10" Stationary RollerMills (continued)
Selection, Roll Speed Differential (Must Choose)
10" Rollermill roll speed differential drive, 1:1 belt
10" Rollermill roll speed differential drive, 1:1.12 belt
Selection, 10" RollerMill Drive Hub (Must Choose)
Motor Pulley, 2 grov 184T (1-1/8")
Motor Pulley, 2 grov. 213T/215T (1-3/8")
2 - 10" Roller Mill
LIST PRICES
CODE
NUMBER
SUGGESTED
LIST PRICE
402260
402270
$605
$643
CODE
NUMBER
SUGGESTED
LIST PRICE
410350
410360
$97
$97
Effective 10-1-10
Revision P
712-864-3131
2010-2011
LIST PRICES
Standard Features
-Roll cleaners
CODE
NUMBER
SUGGESTED
LIST PRICE
20" RollerMill, motor mount, drive kit (P20920),
Must choose hopper and motor drive hub
Must choose rolls and roll speed differential
441950
$6,687
20" RollerMill, 6" auger out base,
540 PTO drive kit (P20911)
Must choose hopper
442000
$7,389
20" RollerMill, 6" auger out base,
motor mount, electric drive kit (P20920)
Must choose hopper and motor drive hub
442010
$7,754
CODE
NUMBER
SUGGESTED
LIST PRICE
20" flared hopper
P37488
$989
20" commercial hopper
P20480
$1,882
CODE
NUMBER
SUGGESTED
LIST PRICE
369680
369690
369700
396790
396830
387860
387850
$1,195
$1,195
$1,195
$1,195
$1,195
$1,195
$1,195
Selection, 20" Hopper (Must Choose One)
1 - 20" Roller Mill
Effective 10-1-10
Revision P
712-864-3131
2010-2011
Selection, Roll Speed Differential
(Must Choose)
20" Rollermill roll speed differential drive, 1:1.12 belt
Selection, 20" RollerMill Drive Hub (Must Choose)
Motor pulley, 254T/256T (1-5/8")
Motor pulley, 215T (1-3/8")
Options, 2-High Attaching Kit (For 2-high unit only)
2-high 20" attaching kit - electric
2-high 20" attaching kit - PTO
2 - 20" Roller Mill
LIST PRICES
CODE
NUMBER
SUGGESTED
LIST PRICE
397390
397630
$773
$807
CODE
NUMBER
SUGGESTED
LIST PRICE
410140
410370
$137
$128
CODE
NUMBER
SUGGESTED
LIST PRICE
P20890
P20877
$5,372
$5,723
Effective 10-1-10
Revision P
712-864-3131
2010-2011
LIST PRICES
Standard Features
-Roll cleaners
CODE
NUMBER
SUGGESTED
LIST PRICE
30" RollerMill, bottom discharge, 30" commercial hopper,
electric drive kit (P30271), motor mount
Must choose motor rolls, roll speed differential,
442030
$12,384
30" RollerMill, base w/9" auger, 30” commercial hopper,
540 PTO drive kit w/tether (P30265)
442060
$13,074
30" RollerMill, Base with 9" auger, 30” commercial hopper,
electric drive kit (P30271), motor mount
442070
$13,802
CODE
NUMBER
SUGGESTED
LIST PRICE
370080
370090
370100
396800
396840
390400
389080
$2,463
$2,463
$2,463
$2,463
$2,463
$2,463
$2,463
CODE
NUMBER
SUGGESTED
LIST PRICE
423970
$1,045
Selection, Roll Speed Differential
(Must Choose)
1 - 30" Roller Mill
Effective 10-1-10
Revision P
712-864-3131
2010-2011
Selection, RollerMill Drive Hub (Must Choose)
Motor pulley, 284T/286T (1-7/8")
Options, 2-High Attaching Kit (For 2-high unit only)
2-high 30" attaching kit (electric drive only)
LIST PRICES
CODE
NUMBER
SUGGESTED
LIST PRICE
410380
$148
CODE
NUMBER
SUGGESTED
LIST PRICE
P30241
$7,697
CODE
NUMBER
SUGGESTED
LIST PRICE
423250
$564
Note: Must choose two rolls from roll selection to complete unit.
Options, 30" Hopper Magnet (May choose if applicable)
30" Hopper Magnet
2 - 30" Roller Mill
Effective 10-1-10
Revision P
712-864-3131
2010-2011
Pull Type Graders
LIST PRICES
Standard Features
-15 Degree blade tilt for slope cuts
-42 Degree blade angle with blade swing
-15" Ground Clearance, 30" blade height
-Replaceable high carbon steel cutting edge
-Three hydraulic tractor valves (angle, tilt, raise)
-Requires 40-180 horse power
-Four hydraulic cylinders and hoses
-Combination single/double hitch
-11L x 15 tires, 6-bolt hubs
-Box scraper ends
-Weight box, storage parking jack
CODE
NUMBER
SUGGESTED
LIST PRICE
Model 900 - 9' Blade Width
LS900
$12,225
LS1200
$12,884
LS1400
$13,339
LS1600
$13,958
Options Not required to complete machine
CODE
NUMBER
SUGGESTED
LIST PRICE
Optional gauge wheel, right hand
Optional gauge wheel, left hand
LS2000018
LS2000017
$841
$841
1 - Graders
Effective 10-1-10
Revision O
712-864-3131
2010-2011
Land Planes
LIST PRICES
Standard Features
- 4-1/2" diameter depth control cylinder
-Blade depth 22"
CODE
NUMBER
SUGGESTED
LIST PRICE
Selection, Carrier Wheels(Must Choose)
CODE
NUMBER
SUGGESTED
LIST PRICE
402740
V180597
$2,154
$3,629
CODE
NUMBER
SUGGESTED
LIST PRICE
V180680
V180610
V180615
V180720
V180580
V180585
558000
$814
$307
$307
$356
$439
$375
$1,452
CODE
NUMBER
SUGGESTED
LIST PRICE
V180060
V180070
V180019
V180020
$2,378
$3,208
$4,682
$5,067
Basic Unit, Model 1200 - 12' blade width
Basic Unit, Model 1650, 16' blade width
Basic Unit, Model 2000, 20' blade width (folding wings)
Basic Unit, Model 2400, 24' blade width (folding wings)
High floatation tires - 26 x 12 - 12
Single wheel kit - 2 single tires and forks
Dual wheel kit - 2 double forks & 4 tires
Selection, Hitches (Must Choose)
Kit - hitch bar standard, category 2 (1200)
Kit - hitch bar standard, category 2 (1650)
Kit - hitch bar standard, category 3 N. (1650)
Kit - hitch bar standard, category 3 (1200, 1650, 2000, 2400)
Kit - hitch bar standard, category 3 N. (2000, 2400)
Kit – hitch bar standard, category 4 N
Kit - Quick Hitch Attachment
S-tine Attachment
Model 1200
Model 1650
Model 2000
Model 2400
Prices FOB Armstrong, Iowa 50514
1 - Land Plane
V1200
V1650
V2000
V2400
$10,956
$11,816
$16,484
$17,265
Effective 10-1-10
Revision T
712-864-3131
2010-2011
Flail Shredders
LIST PRICES
Standard Features
-1000 RPM
-Heavy duty PTO with Overriding Clutch
-Choice of 1-3/8" or 1-3/4" PTO
-235 H.P. Superior brand gearbox
-Choice of cupped or side slice knives
-Hard surface knives
-Adjustable shredder bars
1/4 inch thick hood
-Four (4) 7.60 x 15 6-Ply wheels and tires B28
-Adjustable wheel spacing
-Dynamically balanced rotor
-Heavy duty rotor bearings
-External bearing lubrication
CODE
NUMBER
SUGGESTED
LIST PRICE
1375 RPM rotor/ 7380 fpm tip spd.
570560
$18,852
5" hard surface, 1375 RPM rotor/ 7380 fpm tip spd
570580
$22,119
570590
$22,850
CODE
NUMBER
SUGGESTED
LIST PRICE
570540
570550
$800
$852
CODE
NUMBER
SUGGESTED
LIST PRICE
570680
181940
R39520
250170
$2,783
$266
$98
$2,099
180" Shredder - Base Unit
180C-Cupped knife,
6" Hardened,
240" Shredder - Base Unit
240C-Cupped knife,
240C-Side slice knife, 6" hard surface 1375 RPM rotor/7970 fpm tip spd
Selection Must choose to complete machine
1-3/8" Tractor PTO with overriding clutch
1-3/4" Tractor PTO with overriding clutch
Windrow Attachment - (180C, Cupped Knives ONLY)
Disk hitch
Ratchet jack
Road transport assembly for model 240C (less tires)
1 - 180C / 240C Shredders
Effective 10-1-10
Revision E
712-864-3131
2010-2011
146 Fully Mounted Two-Way Moldboard Plows
LIST PRICES
Standard Features
In-the-furrow operation
Up to 14 inch plowing depth
Automatic hydraulic reset, rigid or spring trip beams
Fore/aft clearance:
Heavy-duty tube type main frame
28 inch with 18 inch plows
Hydraulic rollover mechanism with 3 x 8 inch double
acting cylinder with check valve and hoses
Vertical clearances:
Gauge wheel with:
32 inch with automatic beam
7.50-14, 4PR tubeless tire on 3 and 4 furrow rigid and
30 inch with rigid and spring trip beams
spring trip
3 - point combination hitch coupling Cat.II or Cat.III
9.5L-14, 6PR tubeless tire on automatic plows and
5 furrow rigid plow
NOTE: Charging hose attachment must be available for initial set up and periodically thereafter for
maintenance purposes.
Selection 1, Base Machine
146 Fully Mounted Two-Way Moldboard Plow
Selection 2, Version
CODE
NUMBER
SUGGESTED
LIST PRICE
IH29
In Base
CODE
NUMBER
SUGGESTED
LIST PRICE
IH2902RD
$24,365
Rigid Beam
5 furrow, 18 inch
Automatic Reset Beam
3 furrow, 18 inch
4 furrow, 18 inch
Spring Trip Beam
3 furrow, 18 inch
4 furrow, 18 inch
IH2902RE
IH2902RF
$25,119
$30,427
IH2902RG
IH2902RH
$20,216
$24,152
Selection 3, Hitch
CODE
NUMBER
SUGGESTED
LIST PRICE
No Choice
1 - 146 Plows
Effective 10-1-10
Revision G
712-864-3131
2010-2011
Selection 4, Bottoms
HSCXN-25 Heavy-duty
For 3 furrow plows
For 4 furrow plows
For 5 furrow plows
Selection 4, Bottoms (continued)
HSCU-25 Deep Tillage w/upset share
For 3 furrow plows
For 4 furrow plows
For 5 furrow plows
Selection 5, Landsides
RHP and LHP Style Front Landsides w/wear pads
RHP and LHP Long Rear Landsides w/dual wear pads
For 3 furrow plows
For 4 furrow plows
For 5 furrow plows
RHW and LHW Adjustable Landsides (required with HSCU bottoms
and recommended for plows with excessive draft condition)
For 3 furrow plows
For 4 furrow plows
For 5 furrow plows
2 - 146 Plows
LIST PRICES
CODE
NUMBER
SUGGESTED
LIST PRICE
IH2904DA
IH2904DB
IH2904DC
No Charge
No Charge
No Charge
CODE
NUMBER
SUGGESTED
LIST PRICE
IH2904CA
IH2904CB
IH2904CC
$303
$399
$494
CODE
NUMBER
SUGGESTED
LIST PRICE
IH2905CA
IH2905CB
IH2905CC
No Charge
No Charge
No Charge
IH2905DA
IH2905DB
IH2905DC
$973
$973
$973
Effective 10-1-10
Revision G
712-864-3131
2010-2011
Field Installed Attachments for 146 Plows
LIST PRICES
-Order options by code number and quantities as required.
BottomsBottoms are equipped with 18 in. full cut shares.
They may
be used on 16 in. plows and 20 in. plows without changing shares.
HSCU-25-RH Super Chief, HD deep tillage shape, less landside
HSCU-25-LH Super Chief, HD, deep tillage shape, less landside
HSCXN-25-RH Super Chief, less landside
HSCXN-25-LH Super Chief, less landside
CODE
NUMBER
SUGGESTED
LIST PRICE
I492240R
I492241R
I131999C
I1284099C
$865
$865
$746
$746
Landsides Not required for rear bottom(s) on fully mounted plows
CODE
equipped or ordered with rear furrow wheels which include special landsidesNUMBER
Complete with bolts (1 each required)
RHP Two piece front style with steel wear pad, right-hand
LHP Two piece front style with steel wear pad, left-hand
CoultersPrices of rolling coulters, as extra, do not include shanks
or clamps or other service parts for attaching coulters to the plow.
Rolling, one RH and LH
17 inch rippled edge blade
20 inch rippled edge, RH and LH, cushion, cast arm cushion
spring high-lift, 1-1/2 inch shank (pair)
22 inch rippled edge,RH and LH, cushion, cast arm cushion
spring high-lift, 1-1/2 inch shank (pair)
Coulter shanks and clamps for:
First 3 furrows (3 RH and 3 LH) for rigid and spring trip beams only.
(Does not apply to 5 furrow model). 4 furrow rigid or spring trip plows
require rear beam shanks and clamps (code #I479514R)
Coulter attaching parts for rear beam
For rigid beam and spring trip plows
For automatic beams
Additional Attachments
Hose, hydraulic system charging (for automatic reset plows)
Trash plate with bracket for HSCXN bottoms, per coulter
Plastic, right-hand
Plastic, left-hand
1 - 146 Attachments
SUGGESTED
LIST PRICE
I59059C
I1547081C
$87
$87
CODE
NUMBER
SUGGESTED
LIST PRICE
I542658R
I117115A
$898
$1,596
I117116A
$1,653
I79170C
$565
I479514R
I131539C
$186
$350
CODE
NUMBER
SUGGESTED
LIST PRICE
I131570C
$353
I484677R
I484683R
$59
$59
Effective 10-1-10
Revision H
712-864-3131
2010-2011
LIST PRICES
Standard Features
On-the land operation
Removable heat treated alloy steel rigid beams or
heavy spring trip beams
Heavy-duty rectangular steel box type frame
30 inch vertical clearance
Fore/aft clearance:
Hydraulic rollover cylinder, 3-1/2 x 12 inch double
acting with hoses
Male couplers and hydra grips
3-point combination hitch coupling Cat. III and Cat.
IV for all plows, all tractor wheels (duals) on-theland type. Also applicable for Quick Coupler.
Automatic 2-way gauge wheel with 9.5L-15 Tire
8PR tubeless tire
RHP and LHP style front landsides, and choice of
SMV Plate assembly and reflectors
adjustable rigid,rear furrow steel wheel or rear landsides
CODE
NUMBER
SUGGESTED
LIST PRICE
IH30
In Base
CODE
NUMBER
SUGGESTED
LIST PRICE
Rigid Beam
5 furrow, 18 inch
6 furrow, 18 inch
Spring Trip Beam
4 furrow, 18 inch
5 furrow, 18 inch
6 furrow, 18 inch
IH3002RB
IH3002RC
$25,058
$28,900
IH3002RD
IH3002RF
IH3002RG
$26,719
$30,436
$33,333
Selection 3, Hitch
CODE
NUMBER
SUGGESTED
LIST PRICE
IH3003BB
In Base
3 pt. combination hitch
1 - 166 Plows
Effective 10-1-10
Revision H
712-864-3131
2010-2011
CODE
NUMBER
SUGGESTED
LIST PRICE
For 4 furrow plows
IH3004DA
No Charge
For 5 furrow plows
IH3004DB
No Charge
For 6 furrow plows
IH3004DC
No Charge
For 4 furrow plows
IH3004CA
$403
For 5 furrow plows
IH3004CB
$494
For 6 furrow plows
IH3004CC
$594
CODE
NUMBER
SUGGESTED
LIST PRICE
IH3005CA
IH3005CB
IH3005CC
No Charge
No Charge
No Charge
IH3005DA
IH3005DB
IH3005DC
$975
$975
$975
HSCXN-25 Heavy-duty
HSCU-25 Deep Tillage w/upset share (requires rear landside Section 5)
Selection 5, Rear Landsides and Rear Furrow Wheels
Wide Adjustable RHW and LHW Style Rear Landsides
For 4 furrow plows
For 5 furrow plows
For 6 furrow plows
Adjustable Rigid, Rear Furrow Steel Wheel (requires rear beam stop
attachment on spring trip beam plows I542499R)
For 4 furrow plows
For 5 furrow plows
For 6 furrow plows
2 - 166 Plows
Effective 10-1-10
Revision H
712-864-3131
2010-2011
Field Installed Attachments for 166 Plows
LIST PRICES
Bottoms(Bottoms are equipped with 18 in. full cut shares.
They
CODE
NUMBER
SUGGESTED
LIST PRICE
I492240R
I492241R
I131999C
I1284099C
$865
$865
$746
$746
CODE
NUMBER
SUGGESTED
LIST PRICE
I543882R
$581
CODE
NUMBER
SUGGESTED
LIST PRICE
I542658R
I56797C
$898
$1,092
I542501R
I542500R
$339
$272
CODE
NUMBER
SUGGESTED
LIST PRICE
Beam stops, rear RH and LH. Required for spring trip rear beams when
using rear furrow wheels to prevent fully tripped rear bottom from
striking the beam unit.
I542499R
$252
Trash plate with bracket for HSCXN bottoms, per coulter
Plastic, right-hand
Plastic, left-hand
I484677R
I484683R
$59
$59
may be used on 16 in. plows and 20 in. plows without changing shares.)
HSCU-25-LH Super Chief, HD, deep tillage shape, less landside
HSCXN-25-LH Super Chief, less landside
Landsides - (Not required for rear bottom(s) on fully mounted
plows equipped or ordered with rear furrow wheels which include special
landsides.
With bolts to complete Super Chief Bottoms
RHW and LHW Adjustable wide front style, right-hand and left-hand (for
excessive side draft conditions with the 166 two-way plow).
Coulters (Prices of rolling coulters, as extra, do not include shanks
Or clamps or other service parts for attaching coulters to the plow.)
Coulters, rolling, RH and LH heavy-duty side arm type for rear beams (1 pr)
*17 inch rippled edge blade
* 20 inch rippled edge blade
Coulter shanks and clamps for attaching rolling coulters for rear beams
4 furrow
5 and 6 furrow
* Order either I542501R or I542500R to complete
Additional Attachments
1 - 166 Attachments
Effective 10-1-10
Revision H
712-864-3131
2010-2011
LIST PRICES
Standard Features
On-the land operation
Removable heat treated alloy steel rigid beams
Heavy-duty rectangular steel box type frame
30 inch vertical clearance
Fore/aft clearance:
RHP and LHP style front landsides, and choice of
adjustable rigid,rear furrow steel wheel or
rear landsides
Hydraulic rollover cylinder, 3-1/2 x 12 inch double
acting with hoses
Male couplers and hydra grips
3-point combination hitch coupling Cat. III and Cat.
IV for all plows, all tractor wheels (duals) on-theland type. Also applicable for Quick Coupler.
Automatic 2-way gauge wheel with 9.5L-15 Tire
8PR tubeless tire
SMV Plate assembly and reflectors
Selection , Complete Machine
CODE
NUMBER
SUGGESTED
LIST PRICE
PL1868RHD
$36,857
Rigid Beam
8 furrow, 18 inch
In Base
Hitch
In Base
HSCXN-25 Heavy-duty
For 8 furrow plows
In Base
For 8 furrow plows
In Base
PL1868RDT
$37,648
Rigid Beam
8 furrow, 18 inch
In Base
Hitch
In Base
HSCU-25 Deep Tillage w/upset share
For 8 furrow plows
In Base
For 8 furrow plows
In Base
1 - 186 Plows
Effective 10-1-10
Revision F
712-864-3131
2010-2011
7501 Vari-Width Semi-Mounted Steerable Moldboard Plows
LIST PRICE
Standard Features
Automatic or toggle trip beams
Tubular main frame, 6 x 8 x 3/8 in. wall
4, 5, 6, and 7/6 furrow w/infinite cut from 14 to 22 in.
(370mm to 540mm) extendable on 4 and 5 furrow
in-the-furrow and 5 and 6 furrow on-the-land
3000 psi Hydraulic cylinder, hoses and fittings
11L-15 (FI) loading rating "F" PR steerable rear furrow
wheel, 9.5L-15 12PR tire castering front wheel,
and 9.5L-15 8 PR tire gauge wheel on-the-land plows
11L-15 load rating "F" PR steerable rear furrow
wheel and gauge wheel with 9.5L-15 8PR tire
in-the-furrow plows
Hydraulic hose grips and tips
SMV emblem and reflectors
Warning and tail lights
All hydraulic cylinders have NitroSteel
rods for superior corrosion resistance
CODE
NUMBER
7501 Vari-Width Semi-Mounted Steerable Moldboard Plow
SUGGESTED
LIST PRICE
IH28
In Base
CODE
NUMBER
SUGGESTED
LIST PRICE
FOR IN-THE-FURROW TYPE HITCH
Automatic Reset
4 furrow
6 furrow (non-expandable)
IH2802GD
IH2802GF
$24,843
$32,376
WITH ON-THE-LAND TYPE HITCH
Toggle Trip
5 furrow
IH2802GG
$30,742
1 - 7501 Plows
Effective 10-1-10
Revision G
712-864-3131
2010-2011
(continued)
Selection 3, Hitch
LIST PRICE
adjustment. See attachment Code I13449282C to convert Cat. II hitches to Cat. III N.
CODE
NUMBER
SUGGESTED
LIST PRICE
In-The-Furrow Type (Mechanical Version)
Mechanical width of cut and mechanical draft adjustment (includes
turnbuckle for draft adjustment)
3 pt. rigid Cat. III
3 pt. rigid Cat. II
IH2803CA
IH2803CB
No Charge
No Charge
In-The-Furrow Type (Hydraulic Version)
Hydraulic width of cut and mechanical draft adjustment (includes
width of cut cylinder and draft adjustment turnbuckle)
3
3 pt. rigid Cat II
3
3 pt. Cat. III
IH2803CC
IH2803CE
$649
$722
IH2803CD
$1,550
In-The-Furrow Type, Auto Draft Version (Not recommended for
4 furrow plows w/o extensions)
Hydraulic width of cut and automatic hydraulic draft adjustment/
auto draft (includes cylinders and hoses)
3
3 pt. Cat. III
IH2803CF
$1,623
On-The-Land Type (Mechanical Version)
Mechanical Width of Cut Adjustment (includes turnbuckle)
1 4
3 pt. rigid Cat. III
3
3 pt. rigid Cat. II
IH2803CG
IH2803CH
No Charge
No Charge
Cat. III hitches recommended for maximum crossbar
In-The-Furrow Type, Auto Draft Version (Not recommended for
4 furrow plows w/o extensions)
Hydraulic width of cut and automatic hydraulic draft adjustment/
auto draft (includes cylinders and hoses)
2 3 4 3 pt. rigid Cat. II (If ordering for 4 furrow toggle trip or auto trip, codes
IH28006CA or IH2806CB must be ordered from Selection 6)
2 - 7501 Plows
Effective 10-1-10
Revision G
712-864-3131
2010-2011
(continued)
LIST PRICE
CODE
NUMBER
SUGGESTED
LIST PRICE
IH2803CJ
IH2803CK
$649
$722
CODE
NUMBER
SUGGESTED
LIST PRICE
HSCXN-25 Heavy-duty Super Chief w/high speed moldboard and
upset share w/landside (recommended for general purpose)
For 4 furrow plows
For 5 furrow plows
For 6 furrow plows
IH2804DA
IH2804DB
IH2804DC
No Charge
No Charge
No Charge
HSES High Speed European Style Moldboard w/landside and
replacement point (not recommended in plowing depths over 10 in.)
For 4 furrow plows
For 5 furrow plows
For 6 furrow plows
IH2804CJ
IH2804CK
IH2804CL
$484
$606
$722
Selection 3, Hitch (continued)
On-The-Land Type (Hydraulic Version)
Hydraulic Width of Cut Adjustment (includes cylinders and hoses)
2 3 3 pt. rigid Cat. II
3 3 pt. rigid Cat. III
1
2
3
4
Requires 1 hydraulic control unit on the tractor for lift cylinder.
Art's-Way does not recommend with 6 furrow plows
Requires 2 hydraulic control units on the tractor (1 for lift cylinder and
1 for hydraulic hitch).
Tractor wheel widths may need adjusting to accommodate full front bottom cut.
3 - 7501 Plows
Effective 10-1-10
Revision G
712-864-3131
2010-2011
(continued)
LIST PRICE
CODE
NUMBER
SUGGESTED
LIST PRICE
20 in. Rippled Edge Blade, Cushion Type, Cast Arm
For 4 furrow plows
For 5 furrow plows
For 6 furrow plows
IH2805DA
IH2805DB
IH2805DC
No Charge
No Charge
No Charge
22 in. Rippled Edge Blade, Cushion Type, Cast Arm
For 4 furrow plows
For 5 furrow plows
For 6 furrow plows
IH2805DE
IH2805DF
IH2805DG
$306
$381
$457
Selection 5, Coulters
20 in. RH Concave, Crimp Center, Disk Blade, Cushion Type w/Cast Arm
For 4 furrow plows
IH2805DJ
For 5 furrow plows
IH2805DK
For 6 furrow plows
IH2805DL
4 - 7501 Plows
$1,331
$1,468
$2,013
Effective 10-1-10
Revision G
712-864-3131
2010-2011
Field Installed attachments for 7501 Plows
LIST PRICES
Order options by code number and quantities as required.
Hitches (In-The-Furrow Type)
3 pt. Cat. III N conversion for in-the-furrow or on-the-land type
(converts all Cat. II hitches to Cat. III N, providing a Cat. II spread with
Cat. III pins)
3 pt. Cat. III hydraulic shifting hitch for use as hillside (for manual
versions) hitch or furrow shifting hitch (includes cylinder and hoses)
Coulters (Prices of rolling coulters, as extra, do not include shanks
1
1
1
or clamps or other service parts for attaching coulters to the plow.)
Rolling, Blade
17 in. rippled edge RH, cast arm cushion spring high-lift, 1-1/2 in. shank
20 in., rippled edge blade, RH, cast arm cushion spring high-lift,
1-1/2 in. shank
22 in., rippled edge blade, RH, cast arm cushion spring high-lift,
1-1/2 in. shank
Coulter attaching parts - Offset Shank (1 set)
1
CODE
CODE
NUMBER
SUGGESTED
SUGGESTED
LIST PRICE
I1344982C
$82
I1995915C
$1,598
CODE
NUMBER
SUGGESTED
LIST PRICE
I1546984C
$759
I1546980C
$741
I1546982C
$820
I547950C
$154
CODE
NUMBER
SUGGESTED
LIST PRICE
I492240R
I492241R
I131999C
$779
$779
$671
I1344986C
$859
Includes precision bearings
Bottoms (Bottoms are equipped with 18 in. full cut shares.
They
may be used on 16 in. plows and 20 in. plows without changing shares.)
HSCU-25-LH Super Chief, HD deep tillage shape, less landside
HSES High Speed European Style with landside and replaceable pads
(not recommended on automatic reset beams where plowing depths,
in severe conditions, exceed 9 in.)
1 - 7501 Attachments
Effective 10-1-10
Revision G
712-864-3131
2010-2011
Field Installed attachments for 7501 Plows
LIST PRICES
Landsides Not required for rear bottom(s) on fully mounted plows
equipped or ordered with rear furrow wheels which include special landsides
Complete with bolts (1 each required)
RHP Two pieces front style with steel wear pad, right-hand
Trash Plates (With brackets, per coulter)
Plastic, right-hand
2 - 7501 Attachments
CODE
NUMBER
SUGGESTED
LIST PRICE
I59059C
$78
CODE
NUMBER
SUGGESTED
LIST PRICE
I484677R
$59
Effective 10-1-10
Revision G
712-864-3131
2010-2011
5310 Grain Drill
LIST PRICES
Standard Features
-Frame width - 10'
15 rows with 7-1/2" spacing
13 rows with 8" spacing
-Acre counter - manual
-11L x 15 tires
-Adjustable row widths
-Adjustable depth control
-Hydraulic down pressure
-Heavy duty double disk openers - 15" offset
-All cylinders included plus hoses 1-10', 1-11', 1-13', 1-14'
-Walk board
-Positive spring loaded ground drive wheel
with 6.70 x 15 13 tire
-Heavy frame construction
-23 bushel capacity grain hopper
-Tongue jack - 8000 pounds
-Clevis hitch
-Press wheels
-4 shipping stands
-Handrail
-Fluted or ripple no-till coulters
CODE
NUMBER
SUGGESTED
LIST PRICE
481410
$26,576
Press Wheels - Specify Quantity (13 or 15)
CODE
NUMBER
SUGGESTED
LIST PRICE
3 x 13 Tire, Heavy Duty Openers
U30000631
In Base
U30000633
In Base
Coulters - Specify Quantity (13 or 15)
CODE
NUMBER
SUGGESTED
LIST PRICE
Fluted - No-Till
Ripple - No-Till
U30000591
U30000592
In Base
In Base
Carrier Wheels
CODE
NUMBER
SUGGESTED
LIST PRICE
Heavy Duty Openers, 7-1/2 Inch Spacing, 15 rows
Heavy Duty Openers, 8 Inch Spacing, 13 rows
Standard Duty 8 Ton Wheel Leg, 11L x 15 Tires
Heavy Duty 10 Ton Wheel Leg, 12.5L x 15 Tires
481400
U30000629
489780(pair)
489790(pair)
$29,114
In Base
In Base
$359
Order options from "Grain Drill Option" Page
1 - 5310 Grain Drill
Effective 10-1-10
Revision H
712-864-3131
2010-2011
5312 Grain Drill
LIST PRICES
Standard Features
-Frame width - 12'
-12.5 x 15 tires
-Lights
-Walk board
-Clevis hitch
-Press wheels
-4 shipping stands
-Handrail
CODE
NUMBER
SUGGESTED
LIST PRICE
481430
$32,681
CODE
NUMBER
SUGGESTED
LIST PRICE
U30000631
In Base
U30000633
In Base
CODE
NUMBER
SUGGESTED
LIST PRICE
Hitch Type
CODE
NUMBER
SUGGESTED
LIST PRICE
Fluted - No-Till
Ripple - No-Till
Pull Type
2 point
481420
U30000629
U30000591
U30000592
U30000407
U30000369
$35,219
In Base
In Base
In Base
In Base
$455
Effective 10-1-10
Revision H
712-864-3131
2010-2011
LIST PRICES
5315 Grain Drill
Standard Features
-Frame width - 15'
-12.5L x 15 tires
-Lights
-Walk board
-Clevis hitch
-Press wheels
-4 shipping stands
-Handrail
CODE
NUMBER
SUGGESTED
LIST PRICE
481450
$38,996
CODE
NUMBER
SUGGESTED
LIST PRICE
U30000631
In Base
U30000633
In Base
CODE
NUMBER
SUGGESTED
LIST PRICE
Fluted - No-Till
Ripple - No-Till
U30000591
U30000592
In Base
In Base
Hitch Type
CODE
NUMBER
SUGGESTED
LIST PRICE
Pull Type
2 point
481440
U30000629
U30000407
U30000369
$41,535
In Base
In Base
$455
Effective 10-1-10
Revision H
712-864-3131
2010-2011
Grain Drill Options
LIST PRICES
CODE
NUMBER
SUGGESTED
LIST PRICE
Small Seed (Legume) Seeder Assembly - 12'
483640
$2,518
Granular Fertilizer Unit w/Stainless Bottom, LH drive - 10'
483600
483610
492540
$4,216
$4,391
$4,880
Additional Openers - Heavy Duty - 2 x 13 Press Wheels (pair)
481730
481740
481720
$1,693
$1,693
$1,693
Additional Coulters - Fluted
Additional Coulters - Ripple
483580
483590
$423
$423
Weight bracket (For Suitcase Weights) - set of 2
483510
$230
Light Kit - (Standard on 1999 production 5312/5315 models)
487060
$431
Perfect Hitch Option Assembly
484380
$23
Selection, Grain Drill Option
1 - Grain Drill Attachments
Effective 10-1-10
Revision H

5105 Portable Mixer - Hammermill LIST PRICES

Transcription

Similar documents

Broadband users: the PDF

Fall Family Celebration

Haul Master - Prairie Sky Equipment Ltd.

Nina Allen Minkyeong Bae Richard Blake Keia Butts Leslie Chung

DEMCO GRAIN CARTS

Geartek email brochure

1412 OE Series Hitch Cover Install (pub.1412cover.ct.141202).indd

GRAIN CART 30TN ASCANELLI.cdr

- Kirovets

“kings” and “queens” party