440004027100_170-fra_bd_ft170-172-176regada

Transcription

KNIFE GATE-VALVE WITH REGADA ELECTRIC ACTUATOR
MAIN CHARACTERISTICS
The S-GATE knife gate valve fitted with the REGADA electric actuator is dedicated to the automatic shut-off of line and
tanks of heavy fluids, slurries and powders. Standard applications for these valves are water treatment, pulp and paper
industry, cement industry, bulk handling and food industry. The REGADA electric actuator is IP67 tight. It makes it possible
to install the valve assembly outdoor. This actuator has a declutchable manual override, 2 torque limiters, 4 limits switches
and an anti-condensation heating resistor. The movement of the knife is protected by side covers.
KNIFE GATE-VALVE WITH REGADA
ELECTRIC 
ACTUATOR
AVAILABLE MODELS


S-GATE 170 : cast iron body, stainless steel gate, NBR seat
S-GATE 172 : stainless steel body and gate, EPDM seat
Model/Ref: 440004027100
S-GATE 176 : cast iron body, stainless steel gate, metal seat (no tightness: 2% kvs loss)
S-GATE 170 : cast iron body, stainless steel gate, NBR seat, bi-directional tightness
DN50 to DN300, fitting with flanges EN 1092 PN10 (optional flanges ANSI 150)
230V AC power supply
LIMITS OF USE
Pressure of fluid : PS
DN50 to DN200
10 bar
DN250
8 bar
DN300
6 bar
Temperature of fluid : TS
See below
Ambient temperature
-10°C / +55°C
Ingress Protection rating
IP67
Duty rating
TS / Siège
S4-25% / 10 cycles per h.
NBR
EPDM
FKM
PTFE
METAL
-10°C
+80°C
+0°C
+110°C
-10°C
+150°C
+0°C
+180°C
-
176: cast iron
-
-
-
-
-10°C
+90°C
176 : cast iron + PE
graphite
-
-
-
-
-10°C
+200°C
170 – 178: cast iron
172: stainless steel
Technical data given for information purpose only. May be subject to alteration without prior notice
SECTORIEL S.A.
45 rue du Ruisseau
38290 SAINT QUENTIN-FALLAVIER – FRA NCE
Tél : +33 4 74 94 90 – Fax : +33 4 74 94 13 95
www.sectoriel.fr / Email : [email protected]
Nbr. of pages
Ref.
Rev.
Date
8
170+REG ENG
1
07/2013
www.lauridsenindustri.com
KNIFE
GATE-VALVE
STANDARDS
OF CONSTRUCTION
Ref. 440004027100
WITH REGADA ELECTRIC ACTUATOR
Standard
Standard
KNIFE GATE-VALVE WITH
REGADA ELECTRIC ACTUATOR
97/23/CE Pressure Equipment Directive
Category I module A
Actuator connection
ISO 5211
EN 1092-2
Final testing
EN 12266-1
Flanges dimensions ANSI
ANSI B16.5
The S-GATE knife gate valve fitted with the REGADA electric actuator is dedicated to the automatic shut-off of line and
tanks of heavy fluids, slurries and powders. Standard applications for these valves are water treatment, pulp and paper
UNIDIRECTIONAL
CONSTRUCTION
industry,
cement industry,
bulk handling and food industry. The REGADA electric actuator is IP67 tight. It makes it possible
to install the valve assembly outdoor. This actuator has a declutchable manual override, 2 torque limiters, 4 limits switches
and an anti-condensation heating resistor. The movement of the knife is protected by side covers.
Flanges CHARACTERISTICS
dimensions
MAIN
AVAILABLE MODELS

S-GATE 170 : cast iron body, stainless steel gate, NBR seat


S-GATE 172 : stainless steel body and gate, EPDM seat
S-GATE 176 : cast iron body, stainless steel gate, metal seat (no tightness: 2% kvs loss)
S-GATE 170 : cast iron body, stainless steel gate, NBR seat, bi-directional tightness
DN50 to DN300, fitting with flanges EN 1092 PN10 (optional flanges ANSI 150)
230V AC power supply
LIMITS OF USE
Pressure of fluid : PS
Temperature of fluid : TS
Ambient temperature
DN50 to DN200
10 bar
DN250
8 bar
DN300
6 bar
See below
-10°C / +55°C
N° Protection
Item
Ingress
rating
S-170 CAST IRON
IP67
S-176 CAST IRON
S-172 STAINLESS STEEL
1
Body
EN-GJL 250 cast iron
1.4408 stainless steel
Duty rating
S4-25% / 10 cycles per h.
2
Gate
AISI 304 stainless steel
3
Packing gland DN50-200
Aluminium
3
4
Seat
NBR
METAL
EPDM
TS /5 Siège Bracket
NBR
EPDM
FKM EpoxyPTFE
coated METAL
carbon steel
Epoxy coated carbon steel
6
Seat retainer
1707– 178:Packing
cast iron
PTFE
PTFE
-10°C
+0°C
-10°C
+0°C NBR
8
O-ring
EPDM
172:
steelplate +80°C +110°C +150°C +180°C
9 stainless
Support
Carbon steel
10
Grease box
Steel
-10°C
11
Handwheel
nut
Steel
176: cast iron
+90°C
12
Stem cap
Steel
13
Cap
Plastic
176
-10°C AISI 303 stainless steel
14: cast iron
Stem+ PE
graphite
+200°C
15
Stem nut
Bronze
16
Handwheel
Steel
17
Friction washer
Brass
SECTORIEL S.A.
SECTORIEL
S.A.
45 rue du Ruisseau
45
rue SAINT
du Ruisseau
38290
QUENTIN-FALLAVIER – FRA NCE
38290
SAINT
FRA13NCE
Tél : +33
4 74QUENTIN-FALLAVIER
94 90 – Fax : +33 4 74– 94
95
Tél
: +33 4 74 94 90
– Fax: :[email protected]
+33 4 74 94 13 95
www.sectoriel.fr
/ Email
Nbr. of pages
Nbr.
Ref. of pages
Ref.
Rev.
Rev.
Date
Date
+45 75 12 62 74 - www.lauridsenindustri.com - Denmark
8
8 ENG
170+REG
170+REG ENG
1
1
07/2013
07/2013
Ref. 440004027100
STANDARDS OF CONSTRUCTION
Standard
Standard
Category I module A
ANSI B16.5
Flanges dimensions
STANDARDS
OF CONSTRUCTIONEN 1092-2
Actuator connection
Final testing
ISO 5211
EN 12266-1
Standard
97/23/CE Pressure Equipment
Directive Category I module A
UNIDIRECTIONAL
CONSTRUCTION
Flanges dimensions
EN 1092-2
ANSI B16.5
Standard
Actuator connection
Final testing
ISO 5211
EN 12266-1
UNIDIRECTIONAL CONSTRUCTION
N°
Item
S-170 CAST IRON
S-176 CAST IRON
1
N°
Body
Item
EN-GJL
ironCAST IRON
S-170 CAST
IRON 250 cast
S-176
2
1
3
2
3
3
4
3
5
4
6
5
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
Gate
Body
Packing
gland DN50-200
Gate
Packing
gland
DN250-300
Seat
Packing
gland DN250-300
Bracket
Seat
Seat retainer
Bracket
Seat
retainer
Packing
Packing
O-ring
O-ring
Support plate
Support
plate
Grease box
Grease box
Handwheel nut
Handwheel nut
Stem cap
Stem cap
Cap
Cap
Stem
Stem
Stem nut
nut
Stem
Handwheel
Handwheel
Friction washer
1.4408
stainless STEEL
steel
S-172
STAINLESS
Aluminium
1.4408
AISI 304
stainless steel
AISI
316stainless
stainlesssteel
steel
EN-GJL
250
cast
iron
1.4408
stainless
steel
Aluminium
NBREN-GJL 250 cast ironMETAL
EPDM steel
1.4408 stainless
Epoxy coated
carbon steel
NBR
METAL
EPDM
AISI 304
stainless
steel
AISI 316
stainless
steel
Epoxy
coated
carbon
steel
Epoxy
coated
carbon
steel
AISI 304 stainless
steel
AISI 316 stainless
steel
PTFE
PTFE
PTFE
PTFE
NBR
EPDM
NBR
EPDM
Carbon steel
Carbon
Steelsteel
Steel
Steel
Steel
Steel
Steel
Plastic
Plastic
AISI 303
303 stainless
stainless steel
steel
AISI
Bronze
Bronze
Steel
Steel
Brass
Technical
Technical data
data given
given for
for information
information purpose
purpose only.
only. May
May be
be subject
subject to
to alteration
alteration without
without prior
prior notice
notice
SECTORIEL
SECTORIEL S.A.
S.A.
45
45 rue
rue du
du Ruisseau
Ruisseau
Tél : +33 4 74 94 90 – Fax : +33 4 74 94 13 95
Tél : +33 4 74 94 90 – Fax : +33 4 74 94 13 95
Nbr.
Nbr. of
of pages
pages
Ref.
Ref.
Rev.
Rev.
Date
Date
8
8
170+REG
170+REG ENG
ENG
1
1
07/2013
07/2013
Ref. 440004027100
Standard
Standard
Category I module A
ANSI B16.5
Flanges dimensions CONSTRUCTIONEN 1092-2
BIDIRECTIONAL
Actuator connection
Final testing
ISO 5211
EN 12266-1
N°
Item
S-170 CAST IRON
1N°
21
32
33
43
54
65
76
87
98
9
10
10
11
11
1212
1313
1414
1515
1616
1717
Item
Body
Gate
Body
Packing
Gate gland DN50-200
Packing
gland
DN250-300
Packing
gland
DN50-200
SeatPacking gland DN250-300
Seat
Bracket
SeatBracket
retainer
Seat retainer
Packing
O-ring
O-ring
Support
plate
Support
plate
Grease box
Grease box
Handwheel nut
Handwheel nut
Stem cap
Stem
cap
Cap
CapStem
Stem
Stem nut
Stem
nut
Handwheel
Handwheel
Friction washer
Friction
Screwwasher
S-176 CAST IRON
CAST
EN-GJL S-178
250 cast
ironIRON
AISI 304
stainless
steel
AISI
316 stainless steel
Aluminium
EN-GJL 250Aluminium
cast iron
EN-GJL 250 cast
iron
NBR
METAL
EPDM
NBR steel
Epoxy coated carbon
coated steel
carbon steel
AISI Epoxy
304 stainless
PTFE NBR
PTFE
NBR PTFE
EPDM
Carbon steel Carbon steel
Steel
Steel
Steel
Steel
Steel
Steel
Plastic
Stainless steel AISI 303Plastic
BronzeAISI 303 stainless steel
Bronze
Steel
Steel
Brass
Stainless steel AISI 304 Brass
SECTORIEL S.A.
SECTORIEL S.A.
45 rue du Ruisseau
45 rue du Ruisseau
38290
SAINT QUENTIN-FALLAVIER – FRA NCE
Tél
Tél :: +33
+33 4
4 74
74 94
94 90
90 –
– Fax
Fax :: +33
+33 4
4 74
74 94
94 13
13 95
95
www.sectoriel.fr
Email :: [email protected]
[email protected]
www.sectoriel.fr // Email
Nbr. of pages
Nbr. of pages
Ref.
Ref.
Rev.
Rev.
Date
Date
8
8
170+REG
170+REG ENG
ENG
1
1
07/2013
07/2013
Ref. 440004027100
Standard
Standard
Flanges dimensions
DIMENSIONS
(mm)
Category I module A
EN 1092-2
ANSI B16.5
Actuator connection
Final testing
ISO 5211
EN 12266-1
N°
Item
S-170 CAST IRON
1
Body
2
Gate
3
3
4
Seat
65
5 Size Bracket 50
6
Seat retainer
40
7 E Packing 40
316
8 H O-ring 289
9 H1 Support plate
409
436
10
Grease box
H2
63
70
11
Handwheel nut
L1
124
139
12
Stem cap
13 L2 Cap
92
92
14
Stem
V
185
185
15
Stem nut
170
-Wg
(kg)
6,5
7,1
16
Handwheel
17 -Wg (kg)
Friction washer
172
6,5
7,8
S-176 CAST IRON
Aluminium
NBR
METAL
EPDM
80 Epoxy coated
100 carbon125
150
200 coated250
steel
Epoxy
carbon steel300
50
50
50
60
60
70
70
PTFE
PTFE
342
382NBR
415
458
575
676
776
EPDM
Carbon
steel
462
502
585
637
815
1016
1116
Steel
92
105
120
130
160
198
234
Steel
154
174
192
217
270
326
380
Steel
Plastic
92
92
102
102
119
119
119
185
185
225
225
325
325
380
Bronze
8,5
9,8
12,7
16,1
26,8
43,5
57,5
Steel
Brass
8,5
10
12,7
15,8
27,8
44,6
58,6
SECTORIEL S.A.
45 rue du Ruisseau
38290 SAINT
QUENTIN-FALLAVIER – FRA NCE
SECTORIEL
S.A.
Télrue
: +33
74 94 90 – Fax : +33 4 74 94 13 95
45
du4Ruisseau
www.sectoriel.fr
/ Email : [email protected]
38290
SAINT QUENTIN-FALLAVIER
– FRA NCE
Tél : +33 4 74 94 90 – Fax : +33 4 74 94 13 95
74
- www.lauridsenindustri.com
/ Email : [email protected] www.sectoriel.fr
Nbr. of pages
Ref.
Nbr.
Rev. of pages
Ref.
Date
Rev.
Denmark
Date
+45 75 12 62
8
170+REG ENG
8
1
170+REG ENG
07/2013
1
07/2013
Ref. 440004027100
Standard
Standard
Category I module A
Actuator connection
EN 1092-2
Final testing
ANSI B16.5
The actuation with REGADA is offered with following characteristics:
- IP 67 actuator with aluminium epoxy coated housing and carbon steel gearbox ,
CONSTRUCTION
-UNIDIRECTIONAL
Max. upsteam / downstream
pressure differential ΔP=10 bar.
- Direct connection between valve and actuator following ISO 5211 - F10
The operators are protected from the movement of the gate through side covers.
Flanges dimensions
ACTUATION
WITH REGADA
Size
Actuator
Power
(W)
I (A)
Resistancy
(W)
Elec.
Connect.
Speed
50
65
80
SO2
60
1,3
20 W
2x
M20x1,5
20 tr.
min.
Operating
time (s)*
39 s
48 s
60 s
ISO 5211
EN 12266-1
Standard equipment
2 adjustable limits switches
2 dry auxiliary switches.
75 s
2 torque limiters.
125
93 s
Heating resistor.
150
114 s
Position indicator.
200
60 s
Declutchable manual override.
100
250
MO3
370
1
35 W
300
For any other working conditions, please consult.
*indicative operating time without pressure
3x
M25x1,5
40 tr.
min.
75 s
90 s
ISO 5211 – F10 connection
OPTIONS FOR THE ACTUATOR
n°
1
2
3
Three-phase 400V, 24 V AC et 24 V DC (SO2 only)
Actuator for low temperature -50°C
Feedback potentiometer
N°
Item
S-170 CAST IRON
OPTIONS
FOR THE VALVE
1
Body
2
n°
3
1
3
2
4
3
5
4
6
5
7
6
8
9
10
11
12
13
14
15
16
17
Gate
NBR, EPDM, PTFE, FKM seats
HT graphited packing
Seat
Flow deflector
Bracket
Flanged ANSI 150 connections
Seat retainer
PN25 body
Packing
Flushing holes
O-ring
Support plate
Grease box
Handwheel nut
Stem cap
Cap
Stem
Stem nut
Handwheel
Friction washer
S-176 CAST IRON
Aluminium
NBR
METAL
EPDM
PTFE
PTFE
NBR
EPDM
Carbon steel
Steel
Steel
Steel
Plastic
Bronze
Steel
Brass
SECTORIEL S.A.
45 rue du Ruisseau
Tél : +33 4 74 94 90 – Fax : +33 4 74 94 13 95
Technical data given for information purpose only.
May be subject
to alteration
without prior notice
www.sectoriel.fr
/ Email
: [email protected]
Nbr. of pages
Ref.
Rev.
Date
8
170+REG ENG
1
07/2013
SECTORIEL
S.A.
Nbr. of pages
+45 75 12 62 74
- Denmark
8
170+REG ENG
45 rue du Ruisseau
Ref.
Ref. 440004027100
Standard
Standard
Category I module A
ANSI B16.5
Flanges dimensions
EN SCHEME
1092-2
ELECTRIC
ACTUATOR SO2 WIRING
Actuator connection
Final testing
ISO 5211
EN 12266-1
Power supply and anti-condensate resistance
1
2
3
11
12
14
15
16
18N°
19
20 1
22 2
3
23
3
24
26 4
27 5
28 6
30 7
31 8
9
32
10
34
11
12
13
14
15
16
17
Limit switch and auxiliary connections
Plug in neutral power supply
Link with terminal 11 (opening)
Link with terminal 15 (closing)
Link with terminal 2 (opening)
Link with terminal 19 (limit switch)
Link with terminal 3 (closing)
Item
S-170 CAST IRON
S-176 CAST IRON
Body
Plug
in power supply phase
Gate
Aluminium
Packing
gland
DN250-300
EN-GJL
250
cast
iron
Plug in phase
Seat
NBR
METAL
EPDM
Bracket
Seat retainer
Packing
PTFE
PTFE
Auxiliary
O-ring connections
NBR
EPDM
Support plate
Carbon steel
Grease box
Steel
Handwheel nut
Steel
Stem cap
Steel
Cap
Plastic
Stem
Stem nut
Bronze
Handwheel
Steel
Friction washer
Brass
SECTORIEL S.A.
45 rue du Ruisseau
Tél : +33 4 74 94 90 – Fax : +33 4 74 94 13 95
Technical data given for information purpose only.
May be subject
to alteration
without prior notice
www.sectoriel.fr
/ Email
: [email protected]
Nbr. of pages
Ref.
Rev.
Date
8
170+REG ENG
1
07/2013
SECTORIEL
S.A.
Nbr. of pages
+45 75 12 62 74
- Denmark
8
170+REG ENG
45 rue du Ruisseau
Ref.
Ref. 440004027100
Standard
Standard
Category I module A
ANSI B16.5
Flanges dimensions
EN 1092-2
ELECTRIC
ACTUATOR MO3 WIRING
SCHEME
Power supply
Actuator connection
Final testing
ISO 5211
EN 12266-1
Anti-condensate resistance
Limit switch and auxiliary connections
1 N°
2
31
11 2
12 3
14 3
15 4
16 5
18 6
19 7
20 8
22 9
23
10
24
11
26
2712
2813
3014
3115
3216
3417
Plug
in neutral power supply
Item
Plug in power supply phase
S-170 CAST IRON
S-176 CAST IRON
Body
Gate
Packing
gland DN50-200
Aluminium
Link
with terminal
19 (limit switch)
Seat
NBR
METAL
EPDM
Link
with terminal 23 (limit switch)
Bracket
Seat retainer
Link
with terminal 12 (limit switch)
Packing
PTFE
PTFE
Link
with terminal 2 (power supply for closing)
O-ring
NBR
EPDM
Support plate
Carbon steel
Grease box
Steel
Link with terminal 2 (power supply for opening)
Handwheel nut
Steel
Stem cap
Steel
Cap
Plastic
Stem
Auxiliary
connections
Stem nut
Bronze
Handwheel
Steel
Friction washer
Brass
Modifications reserved
SECTORIEL S.A.
SECTORIEL S.A.
45 rue
rue du
du Ruisseau
Ruisseau
45
38290 SAINT
SAINT QUENTIN-FALLAVIER
QUENTIN-FALLAVIER –– FRA
FRA NCE
NCE
38290
Tél :: +33
+33 44 74
74 94
94 90
90 –– Fax
Fax :: +33
+33 44 74
74 94
94 13
13 95
95
Tél
www.sectoriel.fr // Email
Email :: [email protected]
[email protected]
www.sectoriel.fr
Nbr. of
of pages
pages
Nbr.
Ref.
Ref.
Rev.
Rev.
Date
8
4
170+REG
ENG
170+REG ENG
1
1
07/2013

440004027100_170-fra_bd_ft170-172-176regada

Transcription

Similar documents

Wedge Gate Valve - Lauridsen Industri

PARTS CATALOG

Neway Pipeline Valve - Stockton Valve Products