Product Catalog

Product Catalog
Terrco® Inc.
222 1st Avenue NW ● Watertown, SD 57201
Phone: (605) 882-3888 ● Fax: (605) 882-0778
Website: www.terrco.com ● Email: [email protected]
About Us
Terrco was recently presented with
the Customer Satisfaction Award for
2011, making it two years in a row
for our grinders/polishers. A survey
of 1100-1200 contractors was taken
by Concrete Polishing Magazine
asking them to rate their favorite
equipment. Terrco took first place
in the electric machine category.
We would like to thank our
customers who have helped to make
Terrco grinders/polishers the best in
the industry. For 75 years Terrco Inc
has offered the most RELIABLE, PRODUCTIVE and INNOVATIVE equipment on the
market. Contact us today to see how a Terrco grinder/polisher can help you.
Terrco® Inc. was founded in 1936 by Peter Vinella under the name Terrazzo Machine and
Supply Company Inc. In 1948 Peter's son Frank Vinella entered the business and in 1953 took
control of the company. Frank's sons, James and Peter Vinella, entered the business in 1978
and 1974 respectively. In 1986 Terrco® Inc. was moved to Watertown, South Dakota where
James Vinella (President) and Peter Vinella (Vice-President) are now in control of the
company.
We began business by supplying our customers with the most productive and rugged floor
grinding and polishing machines in the industry. Today we continue this tradition with the
largest range of innovative Terrco® machines. We have all the machines and parts for your
floor grinding and polishing needs. With engineers and machinists on staff, we can handle your
toughest applications.
Don’t be fooled by cheap imitations, insist on the quality of a Terrco® Grinder/Polisher.
Terrco® is the registered trademark of Terrco, Inc.
Association Memberships:
National Terrazzo and Mosaic Association (NTMA)
North Central Terrazzo Association (NCTA)
Terrazzo Association of Northeastern States (TANS)
Central States Terrazzo Association (CSTA)
Western States Terrazzo Association (WSTA)
1
TERRCO Machines
Model 200
HP/KW
5/3.7
VOLTAGE
230
PHASE
1
FULL LOAD AMP DRAW
24
BREAKER (AMPS)
30
STONE HOLDER RPM
450
SWEEP OF DISCS
19” (483 mm)
ABRASIVE PRESSURE
446 lbs (202 kg)
WIDTH OF MACHINE
20” (508 mm)
LENGTH OF MACHINE
40” (1016 mm)
HEIGHT OF MACHINE
36” (914,4 mm)
NET WEIGHT
650 lbs (295 kg)
SHIPPING WEIGHT
734 lbs (333 kg)
WATER TANK
10 gallon (38 L)
POWER CORD (10-3)
100 ft (30,5 m)
* WEIGHT MEASURED WITH FOUR POCKET WEIGHTS
OPPOSITE ROTATING HEADS
MEANS THE USER DOES NOT
FIGHT THE MACHINE
Magnetic Starter or Variable Speed Drive
Two Disc, Three Stones per Disc
Four 42 lbs. pocket weights
Wet/Dry Setup
Stainless Steel Guards and Water Tank
Direct Drive, No Belts
Leveling System
Uses Plug Stone Shape, Bolt on to Universal Tool
Plate, or Speed Shift System
SEE TERRCO EQUIPMENT IN ACTION ON www.terrco.com
OR
CHECK US OUT ON YOU-TUBE
2
TERRCO Machines
701-S Series
HP/KW
7.5/5.6
SWEEP OF DISCS
27” (685,8 mm)
ABRASIVE PRESSURE
440 LBS (200 kg)
WIDTH OF MACHINE
27-1/4” (692 mm)
LENGTH OF MACHINE
HANDLE UP
29-1/4”
(743 mm)
LENGTH OF MACHINE
HANDLE DOWN
56-1/2”
(1435 mm)
HEIGHT OF MACHINE 37-1/2” (952,5 mm)
NET WEIGHT
775 lbs (352 kg)
SHIPPING WEIGHT
860 lbs (390 kg)
WATER TANK
7 gallon (26,5 L)
POWER CORD (8-3)
100 ft (30,5 m)
* WEIGHT MEASURED WITH FOUR POCKET WEIGHTS
ELECTRICAL OPTIONS
VOLTAGE
230
230
230
230
460
PHASE
1
1
3
3
3
DRIVE
MANUAL VARIABLE MANUAL VARIABLE VARIABLE
AMP DRAW
34
34
22
22
11
BREAKER (AMPS)
50
50
30
30
30
STONE HOLDER RPM
390
350-585
390
350-585
350-585
Optimal for jobs under 5,000 sq. ft.
Mild Steel or Stainless Steel Guards
Stainless Steel Water Tank
Wet/Dry Setup
Direct Drive, No Belts
Leveling System
Adjustable Handle
Uses Plug Stone Shape, Bolt on to
Universal Tool Plate or Speed Shift
System
PRODUCTION RATES
Mastic removal rate of 350 sq. ft. per hour
Thin-Set removal rates of 400 sq. ft. per
hour
Thin-Mil coatings removal of 200 sq. ft.
per hour
Concrete polishing rates of 450 sq. ft. per
polishing pad per hour (depending on grit)
Rough Terrazzo rate of 600 sq. ft. per day
3
TERRCO Machines
Model 7500
HP/KW
10/7.5
SWEEP OF DISCS
20” (508 mm)
ABRASIVE PRESSURE
710 lbs (322 kg)
WIDTH OF MACHINE
21” (533 mm)
LENGTH OF MACHINE 48-3/4” (1238 mm)
HEIGHT OF MACHINE
47” (1194 mm)
NET WEIGHT
850 lbs (386 kg)
SHIPPING WEIGHT
950 lbs (431 kg)
WATER TANK
15 gallon (56,8 L)
POWER CORD (6-3)
100 ft (30,5 m)
* WEIGHT MEASURED WITH FOUR POCKET WEIGHTS
ELECTRICAL OPTIONS
VOLTAGE
230
230
230
460
PHASE
1
3
1
3
DRIVE
MANUAL MANUAL VARIABLE VARIABLE
AMP DRAW
40
20
40
12
BREAKER (AMPS)
60
30
60
30
STONE HOLDER RPM
821
821
420-650
420-650
Mild Steel Guards
Stainless Steel Water Tank
Removable weights for easy transportation
Four 42 lbs. Pocket Weights
Direct Drive, No Belts
Setup for new speed shift diamond disc system,
preventing throwing stones
PRODUCTION RATES
Mastic removal rate of 500 sq. ft. per hour
Thin-Set removal rate of 800 sq. ft. per hour
Thin-Mil coatings removal of 600 sq. ft. per hour
Rough Grind Terrazzo rate of 800 sq. ft. per day
4
TERRCO Machines
Model 2000
HP/KW
15/11.2 or 10/7.5
SWEEP OF DISCS
22-1/2” (571,5 mm)
ABRASIVE PRESSURE
650 LBS (295 kg)
WIDTH OF MACHINE
24” (610 mm)
LENGTH OF MACHINE 67-1/2” (1715 mm)
HEIGHT OF MACHINE
48” (1219 mm)
NET WEIGHT
850 LBS (385 kg)
SHIPPING WEIGHT
975 LBS (442 kg)
WATER TANK
20 gallon (75,7 L)
POWER CORD (6-3)
100 ft. (30,5 m)
* WEIGHT MEASURED WITH FOUR POCKET WEIGHTS
ELECTRICAL OPTIONS
VOLTAGE
230
230
230
460
PHASE
1
3
1
3
DRIVE
MANUAL MANUAL VARIABLE VARIABLE
AMP DRAW
40
27
40
14
BREAKER (AMPS)
60
40
60
30
STONE HOLDER RPM
550
550
500-740
500-740
VALUES BASED ON A 10 HP MOTOR
Optimal for jobs exceeding 5,000 sq. ft.
Stainless Steel Guards and Water Tanks
Wet/Dry Setup
Direct Drive, No Belts
Uses Plug Stone Shape, Bolt on to Universal Tool
Plate or Speed Shift System
Production Rates
Mastic removal rate of 800 sq. ft. per hour
Thin-Set removal rates of 1,200 sq. ft. per hour
Thin-Mil coatings removal of 600 sq. ft. per hour
Concrete polishing rates of 2,000 sq. ft. per polishing pad per hour (depending on grit)
Rough Terrazzo rate of 1,000 sq. ft. per day
5
TERRCO Machines
Model 2000-LP
HP/KW
25 HP ENGINE
SWEEP OF DISCS
22-1/2” (571,5 mm)
ABRASIVE PRESSURE
650 LBS (295 kg)
WIDTH OF MACHINE
24” (610 mm)
LENGTH OF MACHINE 67-1/2” (1715 mm)
HEIGHT OF MACHINE
48” (1219 mm)
NET WEIGHT
885 LBS (400 kg)
SHIPPING WEIGHT
1040 LBS (470 kg)
WATER TANK
20 gallon (75,7 L)
LP TANK
#33 HORIZONTAL
* WEIGHT MEASURED WITH TWO POCKET WEIGHTS
Optimal for jobs exceeding 5,000 sq. ft.
Stainless Steel Guards and Water Tanks
Wet/Dry Setup
Uses Plug Stone Shape, Bolt on to Universal Tool
Plate or Speed Shift System
Production Rates
Mastic removal rate of 800 sq. ft. per hour
Thin-Set removal rates of 1,200 sq. ft. per hour
Thin-Mil coatings removal of 600 sq. ft. per hour
Concrete polishing rates of 2,000 sq. ft. per polishing pad per hour (depending on grit)
Rough Terrazzo rate of 1,000 sq. ft. per day
6
TERRCO Machines
Model 3100-3P
HP/KW
25/18.6
SWEEP OF DISCS
28” (711 mm)
ABRASIVE PRESSURE
1090 lbs (494 kg)
WIDTH OF MACHINE
29-1/2” (749 mm)
LENGTH OF MACHINE 72-1/4” (1835 mm)
HEIGHT OF MACHINE
52” (1321 mm)
NET WEIGHT
1425 lbs (646 kg)
SHIPPING WEIGHT
1625 lbs (737 kg)
WATER TANK
20 gallon (75,7 L)
POWER CORD (4-4)
100 ft (30,5 m)
ELECTRICAL OPTIONS
VOLTAGE
230
PHASE
DRIVE
* WEIGHT MEASURED WITH FOUR POCKET WEIGHTS
3
460
230
460
3
3
3
MANUAL MANUAL VARIABLE VARIABLE
AMP DRAW
60
30
60
30
BREAKER (AMPS)
80-100
50
80-100
50
STONE HOLDER RPM
510
510
385-600
385-600
Optimal for jobs exceeding 10,000 sq. ft.
Despite the weight and size the 3100 can be easily maneuvered by a single person
Uses Plug Stone Shape, Bolt on to Universal Tool Plate or Speed Shift System
Four 42 lbs. Pocket Weights
Mild Steel or Stainless Steel Guards
Stainless Steel Water Tank
Wet/Dry Setup
PRODUCTION RATES
Mastic removal rate of 1000 sq. ft. per hour
Thin-Set removal rates of 1,500 sq. ft. per hour
Thin-Mil coatings removal of 750 sq. ft. per hour
Concrete polishing rates of 2,500 sq. ft. per polishing pad per hour (depending on grit)
Rough Terrazzo rate of 1,500 sq. ft. per day
7
TERRCO Machines
Model 3100-3P SELF PROPELLED
HP/KW
25/18.6
SWEEP OF DISCS
28” (711 mm)
ABRASIVE PRESSURE
1090 lbs (494 kg)
WIDTH OF MACHINE
29-1/2” (749 mm)
LENGTH OF MACHINE 72-1/4” (1835 mm)
HEIGHT OF MACHINE
52” (1321 mm)
NET WEIGHT
1550 lbs (700 kg)
SHIPPING WEIGHT
1800 lbs (816 kg)
WATER TANK
20 gallon (75,7 L)
POWER CORD (4-4)
100 ft (30,5 m)
ELECTRICAL OPTIONS
* WEIGHT MEASURED WITH FOUR POCKET WEIGHTS
VOLTAGE
230
460
230
460
PHASE
3
3
3
3
DRIVE
MANUAL MANUAL VARIABLE VARIABLE
AMP DRAW
60
30
60
30
BREAKER (AMPS)
80-100
50
80-100
50
STONE HOLDER RPM
510
510
385-600
385-600
Optimal for jobs exceeding 10,000 sq. ft.
Despite the weight and size the 3100 can be easily maneuvered by a single person
Uses Plug Stone Shape, Bolt on to Universal Tool Plate, or Speed Shift System
Four 42 lbs. Pocket Weights
SELF PROPELLED
Stainless Steel Guards
Dry Setup
PRODUCTION RATES
Mastic removal rate of 1000 sq. ft. per hour
Thin-Set removal rates of 1,500 sq. ft. per hour
Thin-Mil coatings removal of 750 sq. ft. per hour
Concrete polishing rates of 2,500 sq. ft. per polishing pad per hour (depending on grit)
Rough Terrazzo rate of 1,500 sq. ft. per day
8
TERRCO Machines
Model 6200
OPPOSITE
ROTATING
HEADS MEANS
THE USER
DOES NOT
FIGHT THE
MACHINE
HP/KW
40/30
VOLTAGE
460
PHASE
3
DRIVE
VARIABLE
AMP DRAW
46
BREAKER (AMPS)
60-80
STONE HOLDER RPM
400-760
SWEEP OF DISCS
53-1/2” (1359 mm)
ABRASIVE PRESSURE
1,885 lbs (855 kg)
WIDTH OF MACHINE
55” (1397 mm)
LENGTH OF MACHINE
80” (2032 mm)
HEIGHT OF MACHINE
54” (1372 mm)
NET WEIGHT
2,400 lbs (1088 kg)
SHIPPING WEIGHT
2,565 lbs (1163 kg)
POWER CORD (6-4)
100 ft (30,5 m)
* WEIGHT MEASURED WITH TEN POCKET WEIGHTS
Optimal for jobs exceeding 20,000 sq. ft.
Propelling System
Despite the weight and size the 6200 is
easily maneuverable
Movable weights for easy one person
operation
Stainless Steel Guard with four vacuum
ports and two air flow ports
Dry Setup
Ten 42 lbs. Pocket Weights to Control
Grinding Pressure
Uses Plug Stone Shape, Bolt on Beveled
Edge Disc or Speed Shift System
Production Rates
Mastic removal Rate of 1,500 sq. ft. per
hour
Thin-Set removal rates of 2,500 sq. ft. per
hour
Thin-Mil coatings removal of 1,800 sq. ft.
per hour
Concrete polishing rates of 10,000 sq. ft.
per polishing pad per hour (depending on
grit)
Rough Terrazzo rate of 4000 sq. ft. per day
9
TERRCO Machines
®
Terrco Edger
HP/KW
3/2.2
VOLTAGE
230
PHASE
1
FULL LOAD AMP DRAW
13.2
BREAKER (AMPS)
30
STONE HOLDER RPM
1725
SWEEP OF DISCS
7” (178 mm)
ABRASIVE PRESSURE
45 lbs (20,4 kg)
WIDTH OF MACHINE
16” (406,4 mm)
LENGTH OF MACHINE 37-1/2” (952 mm)
HEIGHT OF MACHINE
37-1/2” (952 mm)
NET WEIGHT
230 lbs (104 kg)
SHIPPING WEIGHT
325 lbs (147 kg)
Extremely Versatile
WATER TANK
7 gallon (26,5 L)
Wet/Dry Set-Up
POWER CORD (14-3)
100 ft (30,5 m)
Magnetic Start
Works with Cup Wheels and Polishing Pads
Movable Arm to get into tight areas
Adjustable Wheels to control height of machine to accommodate different size cup wheels
Belt Driven
ADJUSTABLE ROLLER GUARD
The adjustable roller guard was designed to handle a
seven inch cup wheel. The rollers on the guard are
adjustable to allow the user to choose how close to a
wall to grind. The Terrco Edger equipped with the
HBS-146 guard will keep you off your knees all
while grinding cleanly
CHECK OUT OUR
right up to a wall.
SELECTION OF CUP
WHEELS/BACKING
PADS ON PAGE 17
HBS-146
10
TERRCO Machines
Model 151 Border Machine
Adjustable Carriage: Allows the user to
keep the machine level at all times
Edge Grinder
Wet/Dry Setup
Magnetic Starter
Uses 5” Cup Wheels
Optional roller guard to accommodate 7”
tooling: HBS 146 (as seen on page 10)
SPECIFICATIONS
151
151L
HP/KW
3/2.2
3/2.2
VOLTAGE
230
230
PHASE
1
1
FULL LOAD AMP DRAW
13.2
13.2
BREAKER (AMPS)
30
30
STONE HOLDER RPM
1760
1760
ABRASIVE PRESSURE
70 lbs (32 kg)
90 lbs (41 kg)
WIDTH OF MACHINE
15” (381 mm)
15” (381 mm)
LENGTH OF MACHINE
31” (787 mm)
43” (1092 mm)
HEIGHT OF MACHINE
37” (940 mm)
37” (940 mm)
NET WEIGHT
234 lbs (106 kg)
275 lbs (125 kg)
SHIPPING WEIGHT
315 lbs (143 kg)
340 lbs (154 kg)
WATER TANK
5 gallon (19 L)
5 gallon (19 L)
POWER CORD (10-3)
100 ft (30,5 m)
100 ft (30,5 m)
11
TERRCO Machines
Flex-Shaft Machines
3EG-EA
1 1/2 H.P., 115/230 volt, 3450 RPM, 60
Hz., single phase, AC electric motor
6EG-EA
2 H.P., 115/230 volt changeover switch,
3450 RPM, 60 Hz., single phase, AC
electric motor
5FG-EA
2 H.P., 220 or 440 Volt, 3450 RPM, 60
Hz., Three Phase, AC electric motor
OPTIONS:
SPINDLES: STRAIGHT, ANGLE AND COVE BASE WITH VARIOUS GEAR RATIOS
FLEX-SHAFT: 7/16”, 5/8” OR 1/2” SHAFTS WITH HOUSING AND SHAFT LENGTHS OF
6’, 7’, AND 12’
*CHECK OUR WEBSITE FOR AVAILABILITY AND PART NUMBERS*
SPINDLE GUARDS
ANGLE
DCN 008
Dry, 7”
STRAIGHT
3183W
Wet, 3”
DCN 007
Dry, 5”
DCN 025
Dry, 3”
SPINDLE TYPES
CORNERING TOOLS
Cove Base Dry
Straight Spindle
Cove Base Wet
Angle Spindle
12
Part #
Description
56900
Straight Spindle
SM 821
40 Grit Cone
SM 822
80 Grit Cone
SM 823
120 Grit Cone
TERRCO Tools
®
Terrco Vacuums
Terrco® Pulse-Vac 1250
Part Number (Head)
103125
Part Number (Tank)
103125T
CFM (Motor)
245 (OEM Rating)
Sealed Lift
70” (178 cm)
Decibel Level
86
Voltage
110 Volt
Current (Amps)
15.5
Dimensions
39" H X 28" W X 22" D
99cm H x 71cm W x 56cm D
Weight
82 lbs (37 kg)
Number of Filters
3
Inlet Size
Shaker
2” (5 cm)
Auto
Terrco® Pulse-Vac 2150
Part Number (Head)
103215
CFM (Motor)
311 (OEM Rating)
Sealed Lift
70” (178 cm)
Decibel Level
84
Voltage
220 Volt, 50/60 Hz
Current (Amps)
7.9
Dimensions
63” H x 29” W x 45” D
160cm H x 74cm W x 115cm D
Weight
222 lbs. (101 kg)
Number of Filters
5
Inlet Size
3” (7,6 cm)
Shaker
Auto
13
TERRCO Tools
Equipment
Burnisher
Scrubber
Performance
25,000 sq. ft. per hour
Engine
Kawasaki 17 HP
Engine Speed
3600 RPM
Pad or Brush Size
21”
Pad or Brush Speed
2000 RPM
Deck
Cast Aluminum Alloy
Width
22-3/4”
Length
51-1/2”
Height
39-1/2”
Weight
192 lbs
Sound Level
87 dB
Vibration
Less than 2.5 m/s2
Productivity (per hour)
21,000 sq. ft./1,900 sq. m
Cleaning Path
28” / 700 mm
Length
55.7” / 1410 mm
Width
29” / 740 mm
Height
44” / 1120 mm
Net Weight (with batteries)
609 lb / 276 kg
Scrub Motor Speed
220 RPM
Pad Down Pressure
40, 80 and 120 lb.
Pad Driver Quantity/Size
(2) 14” / 356 mm
Recovery Tank Capacity
27 Gallon / 102 Liter
Solution Tank Capacity
22.5 Gallon / 85 Liter
Batteries
6V, 235AH/ Up to 5.5 hrs.
Propelling Speed
0 - 2.7 mph / 4.3 km/h
Sound Level
67 dBa
14
TERRCO Tools
ReDiToo™ Diamond Tooling
The 10 different bond specifications are suited to the different
size machines when grinding various types of flooring materials
Less stone pull and much less tool and machine vibration
Optimal for climbing over joints without fragmenting edges and
chipping edges of diamond tooling
Available for the speed shift system and bolt on applications
Grit sizes available: 16, 20, 35, 45, 80 and 150
BOND HARDNESS
WHITE
Beveled Edge Discs (B.E.D)
XBL - Polishing Pads - 3”
High Shine
Specifically designed for Terrco machinery
when polishing concrete, marble and
terrazzo
®
Polishing Pads fit all types of Terrco Tools: Speed shift Plates, Plug
Stone Holders and the Universal Tool Plate
XBLM - Metal-Resin Pads - 3”
Metal-Resin Diamond Pads offer all the benefits of
a smooth resin matrix diamond pad with the
advantage of the long life and aggressiveness
associated with metal matrix diamond stones
SOFT
YELLOW
RED
BLUE
SILVER
COPPER
GOLD
HARD
Grit
Item #
50
SM-546
100
SM-543
200
SM-534
400
SM-526
800
SM-527
1500
SM-528
3000
SM-547
Grit
Item #
50
SM-730
100
SM-731
200
SM-734
400
SM-735
For Use:
After rough grinding, to remove scratches prior to polishing
Start with to open up a floor for polishing (When Polishing Only)
Great for grout removal
15
TERRCO Diamonds
ReDiToo™ Diamond Tooling
Aggressive Removal Tool
Item # SM 816
Designed for hard, thick mil trowel down coatings:
MMA, KoolDeck®
For Speed Shift System ONLY
Epoxy Cutter
Item# Bolt On: SM 529 (2.5”), SM 806 (3”)
Speed Shift: SM 578 (2.5”), SM 720 (3”)
The Epoxy Cutter has increased diamond concentration to sustain
longer tool life when removing thin mil coatings
Compatible with all Terrco® Stone Holders
XB-95
Item # SM 809 (Speed Shift)
Item # SM 826 (Bolt On)
30 Grit, 5 Segment, Gold Bond
Great for abrasive materials, smoothing scarified
concrete, smoothing exposed aggregate, river rock
terrazzo
Ripper
Item # SM 801 (Speed Shift)
Item # SM 803 (Bolt On)
16 Grit, 6 Segment
Very Aggressive
Great for Surface Prep
Sharks Tooth - PCD
Item # SM 542 (Bolt On)
Item # SM 577 (Speed Shift)
Polycrystalline Diamond (PCD)
Available for the Speed Shift System and Universal Tool Plate
Used for removal of thick mil coatings
Extremely Productive and Aggressive
16
TERRCO Tooling
ReDiToo™ Diamond Tooling
XBL Resin Polishing Pads
Available in 50, 100, 200, 400, 800 and 1500 Grit
For Wet or Dry Use
High Shine
Diameters available: 3”, 4”, 5”, and 7”
“S” Segment
Available in 20 grit (7” ONLY) and 40 grit
Fast and Very Aggressive
Longest life of all cup wheels
Great for surface prep, paint and glue epoxy thin film removal
Diameters available: 4”, 4-1/2”, 5”, 6” and 7”
“H” Segment
Available in blue and light green bonds
Blue available in 40 and 80 grit - Best of soft materials
Light Green available in 40, 80 and 150 grit
Light green best for hard materials
Diameters available: 4”, 4-1/2”, 5”, 6” and 7”
Radius Cup Wheels for Cove Base
Redesigned to be half the weight of previous models
Available in 40, 80 and 150 grit
Diameters of 5”, 6” and 7”
3/4” or 1” radius
DECIMATOR
Pad Drivers
Aggressive Coating Removal
Available in 5” or 7”
Flexible of Rigid
17
TERRCO Tooling
Tooling and Accessories
Slicer Assembly
Slicer Bracket (Bolt On)
Slicer Bracket CW (Speed Shift)
Slicer Bracket CCW (Speed Shift)
Slicer Blades
Hex Screw
Allen Wrench
Item # X-52
Item # SM 748
Item # SM 756
Item # SM 519
Item # 03-1140
Item # T3043
Pad Driver Assembly
3” Pad Driver Plate
Pad Driver Plug Body
Hex Bolt
Allen Wrench
Plug Wrench
Item # SM 520
Item # SM 506
Item # T3038
Item # SM 532
Item # SM 530
Speed Shift Pad Driver
Item # SM-541
Speed shift enables quick and easy changing
of pads
Speed Shift Discs DO NOT FALL OFF THE
PLATES
Coupling
Item # SM-88
Works with all Terrco® Stone Holders
Rigid design for an always consistent cut
Provides flexibility to ensure your tools follow
the profile of the floor
18
TERRCO Tooling
Stone Holders
Speed Shift Plates
Item # SM 491
Compatible with Terrco® Models: 6200, 3100-3P,
3100-LP and 01-S Series
Compatible with Advance Big 5, Supermatic
with 602 or 702 coupling
Item# FL 130
Compatible with Terrco® Models: 2000
Item# X-119
Compatible with Terrco® Models: 7500
Compatible with Advance Junior, 4 head
Plug Stone Plate
Item # SM 192B
Compatible with Terrco® Models: 6200, 3100-3P,
3100-LP and 01-S Series
Compatible with Advance Big 5, Supermatic
with 602 or 702 coupling
Item# FL 004C
Compatible with Terrco® Models: 2000
Item# FL 004CX
Compatible with Terrco® Models: 7500
Compatible with Advance Junior, 4 head
Universal Tool Plate
Item # SM 492
Compatible with Terrco® Models: 6200, 3100-3P,
3100-LP and 01-S Series
Compatible with Advance Big 5, Supermatic
with 602 or 702 coupling
Item# FL 121
Compatible with Terrco® Models: 2000
Item# AF 099
Compatible with Terrco® Models: 7500
Compatible with Advance Junior, 4 head
19
TERRCO Tooling
Stone Holders
Speed Shift System
The Speed Shift configuration consists of a series of compound angles which lock into the
speed shift plate when slid in from the center outward
Speed Shift Discs are easy to change, as they slide in and centrifugal force keeps them from
coming off
The Speed Shift System is available with all Terrco Diamonds: B.E.D., Polishing Pads,
Epoxy Cutters, Trowel Busters and PCD’s
Single most advanced design for connecting all of the B.E.D. and PCD attachments to many
of the grinders on the market.
Terrco, PrepMaster Machines
Small SASE Machines
Large SASE Machines
Small HTC Machines
Medium HTC Machines
Large HTC Machines
EDCO, Blastrac, MECO, etc.
Generic Conversion Plate
Grind-All BS6200 Machine
20
TERRCO Tooling
Equipment
5” Angle Grinder
Item # SMN 044
Includes:
Grinder
Side Handle
Wheel Guard
Inner Flange
Face Spanner
Outer Nut
5” Dust Guard
8’ Vac Hose (2”)
Adapters
Cup Wheel Diameter
4.5” - 5”
Speed
10,000 RPM
Length
11.75”
Weight
6.3 lb
Voltage
115
Amps
8.0
Hertz
60
Phase
1
Arbor Size
7/8”
Spindle Thread Size
5/8”-11
Concrete Test Hammer
A concrete rebound hammer is the
instrument used for non-destructive
testing of concrete. This tool allows the
user to get immediate results of the
strength of the concrete in various parts
of a floor or structure. The minimum
verifiable strength the test hammer can
measure is 1400 psi (10 MPa).
RTN 3
Dimensions: 12” Diameter x 26” Width
Weight: 125 lbs
TERRAZZO ROLLERS
RTN 4
Dimensions: 1-3/4” Diameter x 9” Width
Weight: 8 lbs
21
TERRCO Tooling
Tooling and Accessories
Terrco® Chemicals
Contact us to find out which chemicals and tools are right for your job.
Crack Repair
Joint Filler
Polyurea
Grout
Densifiers
Dyes
Sealers
AMERIPOLISH® CONCRETE DYES
BLACK
BURNT SIENNA
CARAMEL
CHESTNUT
CHOCOLATE BROWN
EGGPLANT
FOREST GREEN
GOLD
GREEN
MAHOGANY
MAROON
MIDNIGHT BLACK
PATRIOT BLUE
PINE GREEN
RAW SIENNA
SADDLE BROWN
SAND
SEPIA
SLATE BLUE
TERRA COTTA
TURQUOISE
WALNUT
22
Diamond Burnishing Pad
Brings out the shine on Terrazzo, Dyed and
Polished Concrete, Marble, and Stone.
Fits Burnishers, Polishers, and Scrubber
Machines
Helps bring out the shine of a surface more
than polishing alone.
Item #:
Diameter (in.)
SM-675
17
SM-674
20
SM-703
27
Shaver Blades
4” TURBO CUP
WHEELS
20, 40 AND 80 GRIT
4” PAD HOLDER
ON PLUG BODY
Used on Concrete shavers.
10” Diameter
Available in 1/8” or 1/4” thicknesses
Standard octagon bore.
PLUG BODIES
DESIGNED TO FIT 4”
TURBO CUP WHEELS
Terrco® Inc.
222 1st Avenue NW ● Watertown, SD 57201
Phone: (605) 882-3888 ● Fax: (605) 882-0778
Website: www.terrco.com ● Email: [email protected]