Gesso Laminado | Yeso Laminado | Drywall

Gesso Laminado | Yeso Laminado | Drywall
Your project
deserves
the best
www.gyptec.eu
Your project deserves the best
Gyptec is a member of Eurogypsum
FIND OUT MORE
The European manufacturers of gypsum products, Eurogypsum, aims to ensure the
sustainable growth of the market, while contributing to the quality of construction and
environmental sustainability.
The members of this European association are committed to using only 100%
recyclable products and to the development of higher value-added solutions.
www.eurogypsum.org
Best Practices
• Use of FGD;
• Use shipping or rail transports;
• Selective collection of board leftovers;
• Manufacture of products with
higher added value: thermal,
acoustic and fire;
• Concern for safe handling
(labelling, standards manual).
Strong stake in sustainability
Gyptec Ibérica actively contributes towards sustainable development by seeking
and using eco-efficient practices and technologies, combining its growth with
environmental protection.
The company seeks sustainability at all levels, whether economic, social or
environmental. With the use of raw materials such as recycled paper and FGD
gypsum, a by-product of power plants in Portugal, Gyptec Iberia avoids the mining
of gypsum, thus contributing to the preservation of natural resources.
Figueira da Foz ● T (+351) 233 403 050 ● www.gyptec.eu
Gyptec
Gyptec Ibérica, a portuguese company part of the Preceram Group, has been
engaged in the production of plasterboards, using clean and environmentally
sustainable methods, since 2009.
With an installed capacity of 15,000,000 m 2 /year of plasterboards, Gyptec turns to
the extensive knowledge the Preceram Group has on the construction sector, and
to the best international technology, adapting it to the reality of the market.
Certifications
Gyptec Ibérica is certified
by AENOR and IQNet,
according to Standard
UNE-EN ISO 9001:2008,
for the manufacture of
gypsum laminated boards,
composite boards with
thermal and acoustic
insulation and
commercialization of
support materials.
FIND OUT MORE
The Industrial and Business Cluster of Figueira da Foz, where Gyptec is located, is part
of the most complete node of traffic distribution in the central region of Portugal, where
the maritime, rail and road networks are all interconnected.
www.gyptec.eu/en/
certifications.php
João Cunha, Takargo
The transport method, according to an intermodal scheme of railways
plus roadways, contributes to the sustainability of the sector and was
recognized as "Case of Excellence for Environmental Best Practices".
It uses as raw materials: recycled
paper and FGD gypsum
(thermoelectric power plants of
Sines and Pego).
Gyptec promotes selective collection
of leftover boards, recycling and
reintegrating them back into
production.
Gyptec Ibérica
01
Your project deserves the best
Proven quality
The main goal of Gyptec Ibérica is to meet the needs of its customers, ensuring the
best service provision and manufacturing the highest quality products.
All products with the brand name or name Gyptec ensure quality and technical
perfection in the various applications they are intended for, and are periodically
subjected to rigorous testing and trials. Thus, Gyptec can provide the market with
solutions that offer benefits in terms of safety and comfort.
Through constant innovation and continuous improvement in products and
production methods, the company remains true to its vision of becoming a brand
name and reference in this market.
Partnerships
FIND OUT MORE
Gyptec Ibérica is proud to be
partnered with several institutes
for technology development at
international level.
www.gyptec.eu/en/
certifications.php
AENOR, the Spanish
Association for
Standardization and
Certification, certifies that
the laminate plasterboards
manufactured by Gyptec
Ibérica comply with Standard
UNE-EN 520:2005 + A1 and
with RP 35.09 of Aenor
(Specific Aenor regulation for
Gypsum laminated
plasterboards). All products
meet the requirements of the
applicable standards for the
purposes of CE marking.
Safety, storage
and handling
Risk prevention and safety of people,
facilities and equipment, are a
constant concern in the development
of the activities of Gyptec Ibérica.
Information is given about the storage
and handling rules for the material
supplied by Gyptec Ibérica.
FIND OUT MORE
www.gyptec.eu/en/
other_documents.php
02
Figueira da Foz ● T (+351) 233 403 050 ● www.gyptec.eu
Boards
A
H
F
D
Standard
Moisture
Resistant
Fire
Resistant
Impact
Resistant
All type of interior
dry construction,
such as: partition
walls, wall lining,
suspended ceilings,
lighting and pelmet
features and other
decorative applications.
Suitable for damp or
wet areas: such as
kitchens and
bathrooms. Can be
covered with tiles or
similar coating.
Reinforced with
fiberglass, suitable
for areas requiring
high fire resistance.
All type of interior
dry construction.
Suitable for areas
requiring higher impact
resistance, such as
schools, hospitals
and pavilions.
Board A - EN 520
Board H1 - EN 520
Board DF - EN 520
Board D - EN 520
Width (mm)
1200
Width (mm)
1200
Width (mm)
1200
Width (mm)
1200
Thickness (mm)
9,5 / 12,5 / 15 / 18
Thickness (mm)
12,5 / 15
Thickness (mm)
12,5 / 15
Thickness (mm)
12,5 / 15
Length (mm)
2000 - 3000
Length (mm)
2000 - 3000
Length (mm)
2000 - 3000
Length (mm)
2000 - 3000
FIND OUT MORE
Laminated Gypsum Boards
The laminated gypsum boards, also known as
plasterboards, are a product which is increasingly
used in the construction of partition and walls,
wall lining and insulation of walls and ceilings.
Resistant and safe
www.gyptec.eu/en/
gypsum_boards.php
They are a non-combustible material, resistant to fire
and impacts, and free from harmful substances.
Its use helps to create a healthy atmosphere and
greater thermal and acoustic comfort inside buildings.
It enables all kinds of finishing reflecting a perfect
finish without cracking or deformations.
Quality, Boards
03
Your project deserves the best
Insulating Gypsum Boards
EPS
XPS
Cork
Radiant
It consists of a
laminated
plasterboard and an
insulation layer
made of Expanded
Polystyrene.
An affordable solution
for thermal insulation
of walls.
It consists of a
laminated
plasterboard and an
insulation layer
made of Extruded
Polystyrene.
Solution with higher
density and thermal
efficiency.
Board consisting of
laminated plasterboard
and expanded cork
fibre insulation (ICB).
Product with high
thermal and acoustic
performance, ideal for
sustainable
construction.
An innovative central
heating system using
radiant panels embedded
in the plasterboards.
Width (mm)
1200
Width (mm)
1200
Width (mm)
1200
Width (mm)
1200
Thickness (mm)
29,5 / 32,5 / 39,5 /
42,5 / 49,5 / 52,5 /
69,5 / 72,5
Thickness (mm)
29,5 / 32,5 / 39,5 /
42,5 / 49,5 / 52,5
Thickness (mm)
52,5 / 72,5
Thickness (mm)
13,2 / 15,7
Length (mm)
2000 / 2400
Length (mm)
2600 / 3000
Length (mm)
2500 / 2600
Length (mm)
2500 / 2600
FIND OUT MORE
Efficient and Affordable
In the construction or rehabilitation of buildings,
the adoption of the most appropriate solutions is
a key factor for good energy efficiency. Apart from
the savings in labour, the application of value-added
Gyptec boards significantly reduces energy
requirements for heating and cooling buildings, thus
reducing the consequent energy consumption and costs.
04
Figueira da Foz ● T (+351) 233 403 050 ● www.gyptec.eu
Effective and Versatile
www.gyptec.eu/en/
insulating_gypsum_boards.php
Helps change indoor modulation of buildings, adapting
it to modern architecture.
The dry construction system is a fast, clean, economical
and environmentally sustainable method for modernizing
buildings. Gyptec laminated plasterboards are certified
and internationally recognized for their excellent quality.
They are the ideal solution both for new construction and
for rehabilitation.
Profiles and Accessories
FIND OUT MORE
www.gyptec.eu/en/
profiles_and_accessories.php
We offer a wide range of
profiles and metal
accessories for dry
construction.
Fixing and Jointing
FIND OUT MORE
GR2, GR4 and GS24 Joint Filler
GA Adhesive Glue
Treatment of joints in between laminated plasterboards,
bonding bands and finishing coats. Quick or
normal-drying products. All kind of dried work indoors,
such as: partition and walls, wall lining, ceilings, crown
moulding lighting and other decorative elements.
Suitable for wet environments.
Bonding together laminated
plasterboards, joint filling,
and small imperfections.
Fast-drying product.
www.gyptec.eu/en/
fixing_and_jointing.php
Insulating Gypsum Boards, Profiles and accessories, Jointing
05
Your project deserves the best
Partition and Wall
The Gyptec partition and wall systems consists of laminated plasterboards bolted to steel profiles.
According to the envisaged final thickness and desired insulation characteristics the most
suitable type of system to be employed can be chosen: simple with higher fire resistance, with
or without insulation.
In areas of greater demand, more complex systems are used, with reinforced structure and
double or triple boards.
Advantages
Quick execution.
Easy installation of pipes
and ducts.
Allows any type of finishing.
Increases thermal and
acoustic comfort.
FIND OUT MORE
www.gyptec.eu/en/
partition_and_wall.php
Application
Cover the ‘U’ Channel with
acoustic tape and secure
them to the floor and ceiling.
Make sure they are aligned.
Do likewise with the side ‘C’ Studs.
Fit the intermediate ‘C’ Studs with
the recommended spacing (400
or 600 mm). Attach the boards
on one side of the wall with PM
screws and apply the insulation.
Screw the boards on the opposite
side. If it is a dual board solution,
secure with staggered joints.
Caption
1
2
3
4
5
BA13 Board
‘C’ Stud 70
Mineral wool
‘U’ Channel 70
Acoustic tape
06
Figueira da Foz ● T (+351) 233 403 050 ● www.gyptec.eu
Dry construction
The dry construction system is a fast,
clean, economical and environmentally
sustainable method for modernizing
buildings.
The use of laminated plaster can create
a healthy atmosphere by changing the
indoor modulation of buildings, adapting
them to modern architecture, while
providing greater thermal and acoustic
comfort.
Did you know that you can
improve the energy
efficiency of a building?
FIND OUT MORE
www.gyptec.eu/en/
other_documents.php
Acoustic and fire tests
The acoustic performance and fire
resistance of Gyptec solutions are
regularly tested by certified laboratories.
Gyptec plasterboards allow you to
rehabilitate and upgrade any building,
contributing to the reduction of energy
consumption, and improving comfort
levels.
Gyptec dry construction systems are
fire and impact resistant, and have
excellent thermal and acoustic
insulation capabilities.
Did you know that you can
paste tiles onto Gyptec boards?
Gyptec plasterboards may receive various
types of finishing such as paint,
wallpaper and tiles. In wet areas, we
recommend the use of Water-Resistant
Boards.
And did you know you can
hang objects on Gyptec boards?
To attach objects up to 15 kg to the Gyptec
boards, simply use a suitable bushing for
that purpose. Heavier objects, such as a
closet, can be directly attached onto the
metal profiles that are easily detectable
with a magnet.
Partition and Wall
07
Your project deserves the best
Wall Lining
Lining the inside of exterior walls is one of the most practical and efficient
ways to recover existing buildings, or as a root solution for new projects.
Which system to recommend depends on the conditions of the wall and
on the intended insulation. Gyptec boards (simple or insulated) can be
directly glued with GA glue, or applied with a metal support structure.
Advantages
Increases interior comfort.
Contributes to energy
savings.
Provides a perfect finish
with no cracks or moisture.
Versatile in its application.
Ideal for uneven surfaces.
FIND OUT MORE
www.gyptec.eu/en/
wall_lining.php
Direct application
Aplication
Apply the glue points 40 cm away from
each other, while reinforcing the perimeter
of each board.
The glue can be applied directly onto the
board or to the wall.
Attach the board to the wall, keeping it
1 cm away from the floor with the use of
shims, to ensure that there is no contact
with moisture. After placing them on the
wall, press the panels to ensure good
adhesion to the substrate, making sure the
surface is flat and straight with a ruler.
Remove the shims after drying.
Caption
1 ICB Composed Board
2 GA Adhesive Glue
3 Thermal Brick 24
08
Figueira da Foz ● T (+351) 233 403 050 ● www.gyptec.eu
GA Adhesive Glue
Supplied in 25-kg bags.
Usage time approximately 1h50.
Depending on the conditions of
the support, glue consumption
may vary between 2.5 and
5 kg/m 2 .
Application with
profiles
Aplication
An auxiliary structure attached to
the wall can be used or
freestanding - as in the example on
the side. Follow the instructions on
the application of partition and wall
on page 06.
Advantages
Easy installation of pipes
and ducts.
Enhanced mechanical
support.
Better fastening on
degraded walls.
Caption
1
2
3
4
5
6
BA15 Board
‘C’ Stud 48
Mineral wool
‘U’ Stud 48
Acoustic tape
Brick 15
FIND OUT MORE
www.gyptec.eu/en/
wall_lining.php
Wall Lining
09
Your project deserves the best
Ceiling
Coating of ceilings, known as suspended ceilings, is increasingly
used in all kinds of work, either new or renovation.
They are easy to apply, simplify the execution of electrical
installations and air conditioning, and have greater aesthetic value.
According to the project and the desired insulation, we can use:
simple suspended boards, with the insulation glued to the ceiling
or with interposed insulation.
Advantages
Fast application with clean
and dry work.
Increases thermal and
acoustic insulation.
Fire resistant.
Smooth surface without
visible joints.
FIND OUT MORE
www.gyptec.eu/en/
ceiling.php
Application
Mark the final position
on the side walls with
a finishing profile
(angle support or fin).
Attach and level the
profile to the ceiling
using, for example,
threaded rod pivots.
There are other ways
for attaching the boards,
depending on the
support. Apply the boards
with staggered joints.
Caption
1
2
3
4
BA13 Board
Ceiling profile
Pivot
Rod M6
10
Figueira da Foz ● T (+351) 233 403 050 ● www.gyptec.eu
Perforated board Gyptec Vogl
Comprising a perforated plasterboard and a black acoustic veil
on the back side, which absorbs high frequencies and prevents
the fall of dust, perforated Gyptec Vogl boards are supplied
ready to use.
There are 12 different combinations of drilled holes and design,
enabling the design of curved and flat ceilings, with complete
freedom of design.
Advantages
High sound absorption.
Simple and quick
edge-to-edge assembly.
Straight edge panels
facilitate the alignment.
No need for bands.
FIND OUT MORE
www.gyptec.eu/en/
perforated_boards.php
High-performance acoustic ceilings
without any visible joints
Gyptec Vogl 6/18R
Also in 8/18R, 10/23R,
12/25R and 15/30R
Gyptec Vogl 8/12/50R
Also in 12/20/66R,
12/20/35R e 8/15/20R
Gyptec Vogl 8/18Q
Also in 12/25Q
Gyptec Vogl 5/82/15.4SL
Ceilings
11
Your project deserves the best
Reference Works
FIND OUT MORE
www.gyptec.eu/en/works.php
New Hospital of Amarante
Amarante, Portugal
Hospital of Torrejón
Madrid, Espanha
IMAX Cinema - C.C. Colombo
Lisboa, Portugal
Sana Royal Falésia Hotel
Albufeira, Portugal
New Braga Hospital
Meliá Braga Hotel & Spa
Inter. Iberian Nanotechnology Laboratory
Marineda Plaza Shopping Centre
"12 of October" Hospital
El Miradero Conference Centre
Braga, Portugal
Corunha, Espanha
12
Braga, Portugal
Madrid, Espanha
Figueira da Foz ● T (+351) 233 403 050 ● www.gyptec.eu
Vila Nova Famalicão, Portugal
Toledo, Espanha
For further information
Online tool
www.gyptec.eu
The latest novelty is the
inclusion of online software
for real-time calculation of
Gyptec building systems.
More than a website, an actual working tool
Gyptec Ibérica offers a wide range of information online about its products,
such as product data sheets, dimensions, thermal and acoustic behaviour,
certifications, testing and forms of application. You can also consult the Gyptec
catalogues, price lists and distributors by areas.
FIND OUT MORE
FIND OUT MORE
www.gs.solucoesparaconstrucao.com
www.gyptec.eu/en/
brochures.php
Distributors
Get to know the distributor in
your area nearest you.
FIND OUT MORE
www.gyptec.eu/en/
contacts.php
Preceram Group
For more information about
the Group or to discuss any
project, please contact our
team of experts.
Solutions
for Construction
/GrupoPreceram
/fas.GrupoPreceram
/GrupoPreceram
Works, More information
13
DOC 07.01-11 Rev.01
startupdesign.pt
Distribution
We have a complete and versatile
distribution fleet that covers the
entire Iberian Peninsula.
Contact us.
Gyptec IBÉRICA - Gessos Técnicos, S.A.
Parque Ind. e Emp. da Figueira da Foz
Lote 3 - S. Pedro
3090-380 Figueira da Foz
Portugal
T (+351) 233 403 050
F (+351) 233 430 126
[email protected]
www.gyptec.eu