Wild Life - Studio E Fabrics

www.studioefabrics.com
Wild Life
Finished Quilt Size: 59 ½" x 59 ½"
Quilt Fabric Materials
Wilderness Panel
2106P-99
1 Panel
Yellow Leaves
2110-44
1/2 yard
Cream Swirls
2109-44
3/4 yard
Rust Houndstooth
2112-39
1/2 yard
Gray Animal Silhouettes
2108-09
1/4 yard
Green Houndstooth
2112-69
1/2 yard
Rust Animal Silhouettes
2108-39
1/4 yard
Black Swirls
2109-99
1 yard
Cream Animal Silhouettes
2108-49
1/4 yard
Large Chevron Stripe
2107-99
2 yards
Orange Swirls
2109-33
1/2 yard
Backing fabric
Your Choice 4 yards
Additional Materials
Batting 70" x 70"
Coordinating thread
Quilting and sewing supplies
Featuring fabric from Wilderness Lodge by
•STUDIO e PROJECTS•
www.studioefabrics.com
Cutting
2106P-99
One Wilderness Panel
Cut 1 - 23 ½" square
2107-99
2 yards
Cut 4 - 6" x 70" strips
2109-44
¾ yard
Cut 12 - 1 ½" squares
Cut 48 - 2 ½" squares
Cut 2 - 1 ½" x 23 ½" strips
Cut 2 - 1 ½" x 25 ½" strips
Cut 2 - 1 ½" x 35 ½" strips
Cut 2 - 1 ½" x 37 ½" strips
2108-09
¼ yard
Fussycut 4 - 3 ½" squares
2108-39
¼ yard
Fussycut 4 - 3 ½" squares
2108-49
¼ yard
Fussycut 4 - 3 ½" squares
2109-33
½ yard
Cut 12 - 1 ½" x 2 ½" rectangles
Cut 6 - 1 ½" x 3 ½" rectangles
Cut 6 - 1 ½" x 5 ½" rectangles
Cut 11 - 4 ½" squares
2110-44
½ yard
Cut 12 - 1 ½" x 2 ½" rectangles
Cut 6 - 1 ½" x 3 ½" rectangles
Cut 6 - 1 ½" x 5 ½" rectangles
Cut 11 - 4 ½" squares
2112-39
½ yard
Cut 12 - 1 ½" x 2 ½" rectangles
Cut 6 - 1 ½" x 3 ½" rectangles
Cut 6 - 1 ½" x 5 ½" rectangles
Cut 11 - 4 ½" squares
2112-69
½ yard
Cut 12 - 1 ½" x 2 ½" rectangles
Cut 6 - 1 ½" x 3 ½" rectangles
Cut 6 - 1 ½" x 5 ½" rectangles
Cut 11 - 4 ½" squares
2109-99
1 yard
Cut 2 - 2" x 37 ½" strips
Cut 2 - 2" x 40 ½" strips
Cut 7 - 2 ½" WOF strips (binding)
Page 2 of 9
•STUDIO e PROJECTS•
Page 3 of 9
www.studioefabrics.com
Sewing
Sew using a ¼" seam allowance, with right sides together (RST) unless otherwise indicated. Press as shown by arrows.
Quilt Center
1. Assemble two 1 ½" x 3 ½" Orange Swirls rectangles and one 3 ½" Rust Animal
Silhouettes square as shown. Unit should measure 3 ½" x 5 ½". Make one. (Fig. 1)
2. Assemble two 1 ½" x 5 ½" Orange Swirls rectangles and one 3 ½" x 5 ½" Orange
Swirls/Rust Animal Silhouettes unit as shown. Unit should measure 5 ½" x 5 ½".
Make one. (Fig. 2)
3. Repeat steps one and two with the Yellow Leaves rectangles and Gray Animal
Silhouettes square as shown. Unit should measure 5 ½" x 5 ½". Make one. (Fig. 3)
4. Repeat steps one and two with the Rust Houndstooth rectangles and Cream
Animal Silhouettes square as shown. Unit should measure 5 ½" x 5 ½". Make one.
(Fig. 4)
5. Repeat steps one and two with the Green Houndstooth rectangles and Rust Animal
Silhouettes square as shown. Unit should measure 5 ½" x 5 ½". Make one. (Fig. 5)
6. Repeat steps one and two with the Orange Swirls rectangles and Gray Animal
Silhouettes square as shown. Unit should measure 5 ½" x 5 ½". Make one. (Fig. 6)
7. Repeat steps one and two with the Yellow Leaves rectangles and Cream Animal
Silhouettes square as shown. Unit should measure 5 ½" x 5 ½". Make one. (Fig. 7)
8. Repeat steps one and two with the Rust Houndstooth rectangles and Rust Animal
Silhouettes square as shown. Unit should measure 5 ½" x 5 ½". Make one. (Fig. 8)
9. Repeat steps one and two with the Green Houndstooth rectangles and Gray
Animal Silhouettes square as shown. Unit should measure 5 ½" x 5 ½". Make one.
(Fig. 9)
10. Repeat steps one and two with the Orange Swirls rectangles and Cream Animal
Silhouettes square as shown. Unit should measure 5 ½" x 5 ½". Make one. (Fig. 10)
11. Repeat steps one and two with the Yellow Leaves rectangles and Rust Animal
Silhouettes square as shown. Unit should measure 5 ½" x 5 ½". Make one. (Fig. 11)
12. Repeat steps one and two with the Rust Houndstooth rectangles and Gray Animal
Silhouettes square as shown. Unit should measure 5 ½" x 5 ½". Make one. (Fig. 12)
13. Repeat steps one and two with the Green Houndstooth rectangles and Cream
Animal Silhouettes square as shown. Unit should measure 5 ½" x 5 ½". Make one.
(Fig. 13)
14. Assemble two 2 ½" Cream Swirls squares and one 1 ½" x 2 ½" Yellow Leaves
rectangle as shown. Unit should measure 2 ½" x 5 ½". Make six. (Fig. 14)
15. Assemble two 1 ½" x 2 ½" Yellow Leaves rectangles and one 1 ½" Cream Swirls
square as shown. Unit should measure 1 ½" x 5 ½". Make three. (Fig. 15)
16. Assemble two 2 ½" x 5 ½" Yellow Leaves/Cream Swirls units and one 1 ½" x 5 ½"
Yellow Leaves/Cream Swirls unit as shown. Unit should measure 5 ½" x 5 ½". Make
three. (Fig. 16)
17. Repeat steps fourteen through sixteen with the Rust Houndstooth rectangles and
Cream Swirl squares. Unit should measure 5 ½" x 5 ½". Make three. (Fig. 17)
18. Repeat steps fourteen through sixteen with the Green Houndstooth rectangles and
Cream Swirl squares. Unit should measure 5 ½" x 5 ½". Make three. (Fig. 18)
19. Repeat steps fourteen through sixteen with the Orange Swirls rectangles and
Cream Swirl squares. Unit should measure 5 ½" x 5 ½". Make three. (Fig. 19)
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
Fig. 19
•STUDIO e PROJECTS•
Page 4 of 9
www.studioefabrics.com
20. Assemble two 1 ½" x 23 ½" Cream Swirls strips and one 23 ½" Quilt Panel square as
shown. Unit should measure 23 ½" x 25 ½". Make one. (Fig. 20)
21. Assemble two 1 ½" x 25 ½" Cream Swirls strips and one 23 ½" x 25 ½" Cream
Swirls/Quilt Panel unit as shown. Unit should measure 25 ½" x 25 ½". Make one.
(Fig. 21)
22. Assemble one Yellow Leaves/Cream Swirls unit, one Orange Swirls/Rust Animal
Silhouettes unit, one Rust Houndstooth/Cream Swirls unit, one Yellow Leaves/
Gray Animal Silhouettes unit, one Green Houndstooth/Cream Swirls unit, one
Rust Houndstooth/Cream Animal unit and one Orange Swirls/Cream Swirls unit
as shown. Unit should measure 5 ½" x 35 ½". Make one. (Fig. 22)
23. Assemble one Green Houndstooth/Cream Animal unit, one Orange Swirls/Cream
Swirls unit, one Rust Houndstooth/Gray Animal Silhouettes unit, one Green
Houndstooth/Cream Swirls unit and one Yellow Leaves/Rust Animal Silhouettes
unit as shown. Unit should measure 5 ½" x 25 ½". Make one. (Fig. 23)
24. Assemble one Green Houndstooth/Rust Animal Silhouettes unit, one Yellow
Leaves/Cream Swirls unit, one Orange Swirls/Gray Animal Silhouettes unit, one
Rust Houndstooth/Cream Swirls unit and one Yellow Leaves/Cream Animal
Silhouettes unit as shown. Unit should measure 5 ½" x 25 ½". Make one. (Fig. 24)
25. Assemble one Rust Houndstooth/Cream Swirls unit, one Orange Swirls/Cream
Animal Silhouettes unit, one Yellow Leaves/Cream Swirls unit, one Green
Houndstooth/Gray Animal Silhouettes unit, one Orange Swirls/Cream Swirls unit,
one Rust Houndstooth/Rust Animal Silhouettes unit and one Green Houndstooth/
Cream Swirls unit as shown. Unit should measure 5 ½" x 35 ½". Make one. (Fig. 25)
Fig. 22
Fig. 25
Fig. 23
Fig. 20
Fig. 21
Fig. 24
•STUDIO e PROJECTS•
www.studioefabrics.com
26. Assemble Quilt Center as shown. Quilt Center should
measure 35 ½" x 35 ½". (Fig. 26)
Borders
27. Attach 1 ½" x 35 ½" Cream Swirls
inner side borders. Attach 1 ½" x
37 ½" Cream Swirls inner top and
bottom borders. (Fig. 27)
28. Attach 2" x 37 ½" Black Swirls
middle side borders. Attach 2" x
40 ½" Black Swirls middle top and
bottom borders. (Fig. 27)
Fig. 27
Fig. 26
Page 5 of 9
•STUDIO e PROJECTS•
www.studioefabrics.com
Page 6 of 9
29. Assemble three 4 ½" Green Houndstooth squares, three 4 ½" Yellow Leaves squares, three 4 ½" Rust Houndstooth squares
and three 4 ½" Orange Swirls squares as shown. Top Patchwork Outer Border should measure 4 ½" x 48 ½". Make one.
(Fig. 28)
Fig. 28
30. Assemble three 4 ½" Rust Houndstooth squares, three 4 ½" Orange Swirls squares, two 4 ½" Green Houndstooth squares
and two 4 ½" Yellow Leaves squares as shown. Left Patchwork Outer Border should measure 4 ½" x 40 ½". Make one.
(Fig. 29)
Fig. 29
31. Assemble three 4 ½" Yellow Leaves squares, three 4 ½" Green Houndstooth squares, two 4 ½" Orange Swirls squares and
two 4 ½" Rust Houndstooth squares as shown. Right Patchwork Outer Border should measure 4 ½" x 40 ½". Make one.
(Fig. 30)
Fig. 30
32. Assemble three 4 ½" Yellow Leaves squares , three 4 ½" Green Houndstooth squares, three 4 ½" Orange Swirls squares and
three 4 ½" Rust Houndstooth squares and as shown. Bottom Patchwork Outer Border should measure 4 ½" x 48 ½". Make
one. (Fig. 31)
Fig. 31
•STUDIO e PROJECTS•
www.studioefabrics.com
33. Assemble Patchwork Outer Border as shown. Unit should measure 48 ½" x 48 ½". (Fig. 32)
Fig. 32
Page 7 of 9
•STUDIO e PROJECTS•
Page 8 of 9
www.studioefabrics.com
34. The outer border is mitered. Attach all four borders to the quilt, repeating the following steps for each side. (Fig. 32)
• Mark the center of the patchwork outer border.
• Mark the center of the 6” wide outer border.
• Match center marks and pin the border in place by starting in the center.
• Sew the outer border to the quilt by beginning and ending ¼” from the edge of the quilt. Backstitch at the beginning and
ending of stitching to secure stitching.
• If your measurements have been accurate your stitched seam should measure 48”. If your measurement varies slightly,
that is ok, but the same measurement needs to be used for every side to ensure your quilt is square.
Fig. 32
¼"
¼"
35. All four borders are now attached and the tails of each border Fig. 33
are hanging free.
36. Place one border on top of an adjacent border by folding one
corner of the quilt diagonally with right sides together. This
can be achieved by folding the entire quilt into a large triangle.
Match up outside raw edges of the border and pin in place.
(Fig. 33)
37. Using a ruler with a 45 degree angle marking, draw a line from
the end of stitches to the outside edge of border as shown. (Fig.
34)
38. Pin well and stitch along the marked line beginning at the
arrow. Backstitch at the beginning and end of stitching to
secure stitching.
39. Press open and trim ¼” away from seam. (Fig. 35)
Fig. 34
Fig. 35
ruler
•STUDIO e PROJECTS•
www.studioefabrics.com
Page 9 of 9
Layering, Quilting and Finishing
40.Trim selvages from the backing fabric and sew two 70" x WOF strips together. Trim the sewn pieces to make one
70" x 70" backing piece.
41.Press the quilt top and backing well. Layer backing (wrong side up), batting, pressed quilt top (right side up) and
baste. Quilt as desired and trim excess batting and backing when quilting is complete.
Binding
42.Cut the ends of seven binding strips at a 45-degree angle and sew end to end to make a continuous piece of
binding. Fold in half lengthwise and press wrong sides together. Sew the binding to the front of the quilt, raw
edges together. Turn the folded edge to the back, and hand stitch in place.
© 2013 Studio e Fabrics ®