Essentials 8 Bolster Pillow
Transcription
Essentials 8 Bolster Pillow
www.studioefabrics.com Designed by Jocelyn Ueng Essentials 8 Bolster Pillow Finished Quilt Size: 13 3/4" x 24 1/2" Quilt Fabric Materials Black Border Stripe 2114-99 ⅔ yard Red Dot 2120-88 ½ yard Additional Materials 2 yards Offray Single Face Satin ¼" Black Ribbon 9" x 24" Bolster Insert Coordinating thread Quilting and sewing supplies Featuring fabric from Essentials 8 by •STUDIO e PROJECTS• Page 2 of 2 www.studioefabrics.com Cutting 2120-88 ½ yard selvage 15 ½" x 28 ¾" Cut 2 - 4 ¾" x 28 ¾" rectangles Cut 1 - 1 ½" x 28 ¾" rectangle selvage 2114-99 ⅔ yard 2 ½" x 28 ¾" Cut 1 - 15 ½" x 28 ¾" rectangle Cut 1 - 2 ½" x 28 ¾" rectangle Sewing Sew using a ¼" seam allowance, with right sides together (RST) unless otherwise indicated. Press as shown by arrows. 1. Assemble two 4 ¾" x 28 ¾" red dot rectangles, one 2 ½" x 28 ¾" black border stripe rectangle, one 1 ½" x 28 ¾" red dot rectangle and one 15 ½" x 28 ¾" black border stripe rectangle as shown. Pillow unit should measure 27" x 28 ¾". (Fig. 1) 2. Fold the 27" edges under ⅜” (toward the wrong side of pillow) and press in place. Pillow unit should measure 27" x 28". (Fig. 2) 3. Fold the 28" edge under ¾” twice (toward the wrong side of pillow) to create the drawstring opening. Repeat on the opposite 28" edge. (Fig. 3) 4. Stitch one row of stitching ⅝” inside the 28" edges. Pillow unit should measure 24" x 28". Fig. 1 Fig. 2 27" ⅜” fold 28 ¾" Pillow Assembly: ⅜” fold Fig. 3 ¾” Fig. 4 fold 2 ¾” fold 1 ¾” 24" (Fig. 4) 5. Thread the black ribbon through each of the drawstring openings. Tie double knots on each end of each black ribbon. 6. Fold the pillow unit in half along the short edge, with right sides facing. Using a ¼” seam, stitch along the opposite short side of the flat pillow unit. Starting and ending between the drawstring openings. Backstitch at the beginning and ending of stitching to secure stitching. Pillow should measure 13 ¾" x 24 ½". (Fig. 5) 7. Turn the bolster cover right side out, and insert the bolster pillow. Pull ribbon to the ends and tie. ¾” ⅝” stitch Fig. 5 ¼” stitch fold ⅝” stitch
Similar documents
Wild Life - Studio E Fabrics
1. Assemble two 1 ½" x 3 ½" Orange Swirls rectangles and one 3 ½" Rust Animal Silhouettes square as shown. Unit should measure 3 ½" x 5 ½". Make one. (Fig. 1) 2. Assemble two 1 ½" x 5 ½" Orange S...
More information