LED Products for street, industrial and large areas lighting

Transcription

EL
UE
A CATALOG
EV
06
LED Products for street,
industrial and large areas lighting
ELEVA CATALOGUE
20 1 4
LED Products for street,
industrial and large areas lighting
Tunnels
Urban
Photovoltaic
Industrial
Sports
Commercial
Architectural
A CATALOG
EV
06
Eleva - 06/2014 - V. 2
Large Areas
UE
EL
Street
Street
20 1 4
www.niteko.com
Pag. 1
Niteko.
Enjoy the light
International Market
Niteko Srl is an italian Company settled in Montemesola
(TA), designing and producing Solid-state lamps with LED
technology.
In the international market Niteko has been a big player
in the realization of several projects with foreign
partners in:
The company offers LED Fixtures for Street, industrial
and large areas lighting Made in Italy, identified with
“Eleva” brand and commercializes high efficiency
products for indoor solutions and commercial spaces
with “Habita” brand.
Austria, France, Spain, Czech Republic, Slovakia, Poland,
Romania, Sweden, Chile, Algeria, Mexico, Brazil, Saudi
Arabia and Qatar.
To this day Niteko has achieved great rewards and is
listed on a special section among innovative Start-up
enterprises on Taranto (Italy) Chamber of Commerce
with nr. PRA/3951/2013.
After few years from its birth the company is already
recognized on the market as a Smart and young Society.
Main interest areas
Since 2013, the company promoted the internationalization process expanding its market horizons and
obtaining the PCP (Product Conformity Program) certification (known before as SASO), which guarantees that
the products are compliant to local and national regulations and technical requirements of Saudi Arabia.
Niteko achieved the GOST R certification for Russian
market on all LED devices and has lately started a certification process in Czech Republic and Slovakia.
All products under the brand Habita are certified according to the RoHS regulation.
nformit
y
Co
KSA
uct
od
Pr
www.niteko.com
m
Pag. 2
PCP
Prog
ra
(ESCO)
Eleva - 06/2014 - V. 2
Eleva & Habita.
A matter of style!
Eleva & Habita are the two big brands representing
Niteko LED Fixtures.
Eleva & Habita are the two big brands representing Niteko LED Fixtures.
Eleva series identifies high performance LED fixtures for outdoor lighting.
Eleva means greatness, elevation and excellence and increase the value of
the industrial space or street where the Fixture is placed.
Habita represents a series of indoor and commercial spaces LED lighting
systems that meets the requirements of lighting in spaces to live day by day.
The series is suitable for a modern and essential building style.
Niteko product range is able to meet the needs of the market: good quality
at competitive prices.
Niteko
Made in Italy reliability
Innovative Design and Excellent Manufacture are the key words of Italian Brand. MADE IN ITALY means also reliability and versatility
of a company able to supply not just products but high value services as:
Design and production on demand:
Thanks to a staff of Expert Designers and a good Production Capacity, company can
realize Projects and Products on Demand based on customer requirements.
Reconversion of existing products into led technology:
To meet the technological Modernization Need of traditional products (EX. Old
Town Centers). Thanks to the “urban kit” is possible to use the existing fixture and
change only the technology inside.
Pre and post-sales services:
Niteko technical and business consultants are available to provide answers in
short time for each customer request.
Quality:
The company gained the Certifications with IQNet, the largest world's network in the certification field of
management systems for quality, environment, safety and social responsibility.
Researchers experience:
Working on 'LED lighting since 2002.
Niteko company is Partner:
Finsea Srl, is an Holding group leader of a pool of companies operating in the fields of environment, energy, energy saving and
technological innovation. The Group companies have a global turnover around 40.000,000,00 Euro and a total workforce about
370 employees.
Pag. 4
www.niteko.com
Eleva - 06/2014 - V. 2
Why LED
NO MAINTENANCE
Benefit of LED long life results in a reduction on Maintenance
Costs.
TOXIC FREE
Toxic and harmful Free (Gas, Mercury Steam).
ECO FRIENDLY
Built with recyclable materials. LED parts can be easily
disassembled and recycled.
OTHER PLUS
ENERGY EFFICIENCY
100% light output when switched on.
Luminous Efficiency is higher if compared to traditional
technologies (Mercury Steam high-pressure Sourcesand
metal halide Steam Sources).
ENERGY SAVING
The use of LED Lamps can save up to 80% on Energy Costs.
COST SAVING
Life service is three times higher than traditional energy-saving lamps (15.000 hours).
The life Cycle of a LED reaches 80.000 hours, that means
about 9 years of continuous operation (24 hours Per Day).
Better Lighting Energy Saving
Applications
Niteko applications
Street
Tunnels
Urban
Photovoltaic
Industrial
Large areas
Sports
Commercial
Architectural
Street
Urano
Urban
Photovoltaic
Large areas
Sports
Commercial
Urano
Pag. 6
www.niteko.com
Eleva - 06/2014 - V. 2
Index
Halley
Urano
Pag. 8
Pag. 14
Pag. 18
Pag. 24
Pag. 30
Pag. 36
Victoria
Resorsces
Pag. 48
Remote control
Pag. 49
Overvoltage
Pag. 56
Norms
Pag. 57
Pag. 62
Pag. 40
Eleva - 06/2014 - V. 2
Pag. 44
www.niteko.com
Warranty
Pag. 64
Pag. 7
Urano
Street
Street
Pag. 8
Tunnels
Urban
Photovoltaic
Industrial
Large Areas
www.niteko.com
Sports
Architectural
Commercial
Eleva - 06/2014 - V. 2
Urano
Made in Italy
GHOST-R
The right support for you
Eleva - 06/2014 - V. 2
www.niteko.com
Pag. 9
Urano
MAIN FEATURES
ABS Side Caps.
>80.000 h.
with CCTV systems.
the two metals.
ADVANTAGES
-
performance, even after many years.
Pag. 10
www.niteko.com
Eleva - 06/2014 - V. 2
Urano
URANO
SIZE
b
h
a
STANDRD COLOUR
BODY: Anodized grey
CAPS: Grey RAL 7035
DETAILS
Code
(W)
(lm)
LED n°
(mA)
CCT (K)
CRI (Ra)
a (mm)
b (mm)
[*]
35
4.000
4
700
4000/5000
70...79
404
416
112
0,200
8,0
U16H-W
[*]
[*]
35
52
3.600
6.000
4
6
700
700
3000
4000/5000
70...79
70...79
404
404
416
416
112
112
0,200
0,200
8,0
8,0
U24H-W
[*]
52
5.400
6
700
3000
70...79
404
416
112
0,200
8,0
[*]
69
8.000
8
700
4000/5000
70...79
404
416
112
0,200
8,0
Extruded aluminium body
Lateral caps in ABS
Tempered glass screen (4 mm)
Other colors available
on request
Adjustable stainless steel bracket
U32H-W
CCT Standard: N (4000K ± 300K)
CCT optional: W (3000K ± 300K)
U48H-W
CCT optional: C (5000K ± 300K)
Power factor : > 0.97
U64H-W
CRI (Ra) Standard: 70...79
CRI (Ra) optional: 80...89
U80H-W
Luminous source efficiency
η >110lm/W
U96H-W
LED Driver integrated
U104H-W
LED quadrichip Cree,
Philips Lumileds
[*]
69
7.200
8
700
3000
70...79
404
416
112
0,200
8,0
[*]
104
12.000
12
700
4000/5000
70...79
404
416
112
0,200
8,0
[*]
104
10.800
12
700
3000
70...79
404
416
112
0,200
8,0
[*]
139
16.000
16
700
4000/5000
70...79
404
416
112
0,200
8,0
[*]
139
15.840
16
700
3000
70...79
404
416
112
0,200
8,0
[*]
174
20.000
20
700
4000/5000
70...79
554
416
112
0,260
15,0
[*]
174
18.000
20
700
3000
70...79
554
416
112
0,260
15,0
[*]
208
24.000
24
700
4000/5000
70...79
554
416
112
0,260
15,0
208
21.600
24
700
3000
70...79
554
416
112
0,260
15,0
225
26.000
26
700
4000/5000
70...79
554
416
112
0,260
15,0
[*]
[*]
Lifetime: 80.000 hrs
U120H-W
U144H-W
h (mm) W.Exp. (m²) (kg)
[*]
225
23.400
26
700
3000
70...79
554
416
112
0,260
15,0
[*]
260
30.000
30
700
4000/5000
70...79
754
416
112
0,303
17,0
[*]
260
27.000
30
700
3000
70...79
754
416
112
0,303
17,0
[*]
313
36.000
36
700
4000/5000
70...79
754
416
112
0,303
17,0
[*]
313
32.400
36
700
3000
70...79
754
416
112
0,303
17,0
[K]: N (4000K ± 300K) - W (3000K ± 300K) - C (5000K ± 300K)
APPLICATIONS
Outdoor sport facilities
[°°]: 00 - 80 - 56 - 30 - 16 - E1 - E2 - E3 - A1 - A3 - R1
[*] = GR (BODY: Anodized Grey / CAPS: RAL 7035) - NE (BODY: Black Satin / CAPS: RAL 7024) - FS (BODY: Smokey Grey Satin / CAPS: RAL 7024)
Indoor sport facilities
Parking areas
[KU-12V] Available for photovoltaic application (power supply 12V d.c. )
[KU-24V] Available for photovoltaic application (power supply 24V d.c.)
Road and pedestrian tunnels
Civic and private parks
Urban and suburban roads
[KU-EM] Emergency Kit available on request: 4 LED - 100mA - 5W - 600 lm - AutonomY 1 h
Architectural and museum
Large areas and infrastructure
DESIGN
[KU-GSM]
Lighting remote control with GSM technology on ALIGHT platform
Innovative Design
CHARACTERITICS
Standard
LED Technology
+45°C
-20°C
Optional
Eleva - 06/2014 - V. 2
125
280
12V
24V
IP66
IK08
3.000 K
220
240
Quality Made in Italy
F
LED
4.000 K
70...79
80.000 h
17,0 Kg
0,303
5.000 K
www.niteko.com
Pag. 11
Urano
PHOTOMETRY
– SYMMETRIC [00]
Symmetric wide beam
139W
250
C0-C180
Symmetric narrow beam
C90-C270
– SYMMETRIC [80]
225W
7.000
5
7.000
5
7.000
5
9.000
7
9.000
7
9.000
7
9
11.000
9
11.000
11.000
115°
– SYMMETRIC [56]
C90-C270
– ELLIPTIC [E1]
Elliptic
Asymmetric
C90-C270
C0-C180
C90-C270
– ASYMMETRIC [A3]
300
C90-C270
C90-C270
3.000
C0-C180
C90-C270
240
2.300
– ASYMMETRIC [A1]
C0-C180
C0-C180
9
– ELLIPTIC [E2]
1.300
C0-C180
C90-C270
115°
– SYMMETRIC [16]
1.800
1.200
C0-C180
115°
– SYMMETRIC [30]
450
C0-C180
313W
800
C0-C180
C0-C180
C90-C270
– ROTO-SYMMETRIC [R1]
240
C90-C270
OTHER APPLICATIONS
Pag. 12
www.niteko.com
Eleva - 06/2014 - V. 2
Urano
MOUNTING ACCESSORIES
Wall mounting (KM-U-AR)
KM-U-AR
KM-U-GAL
KM-U-SPS
KM-U-TP
Wall mounting (standard)
Raceway mounting (tunnel)
Suspension mounting
Pole mounting
KM-U-TES
KM-U-INC
KM-U-BAS
KM-U-TP2
Extended cable mounting
Recessed mounting
Artistic arm mounting
Single arm mounting
(standard)
Other accessories can be
supplied on request
Ceiling
OPTIONAL COLORS
[GR]
[NE]
[FS]
Elimination of condensation.
Eleva - 06/2014 - V. 2
www.niteko.com
Pag. 13
Street
Pag. 14
Tunnels
Urban
Photovoltaic
Industrial
Large Areas
www.niteko.com
Sports
Architectural
Commercial
Eleva - 06/2014 - V. 2
Made in Italy
GHOST-R
The light at the service of the art
Eleva - 06/2014 - V. 2
www.niteko.com
Pag. 15
MAIN FEATURES
Lateral caps in ABS.
>60.000 h.
between the two metals.
of Urano series
ADVANTAGES
-
performance, even after many years.
Pag. 16
www.niteko.com
Eleva - 06/2014 - V. 2
URANO RGB
SIZE
b
h
STANDRD COLOUR
a
BODY: Anodized grey
CAPS: Grey RAL 7035
DETAILS
Code
(W)
(lm)
LED n°
LED type
(mA)
a (mm)
b (mm)
h (mm)
W.Exp. (m²)
Extruded aluminium body
U12L
60
2.200
12
RGBW
350
475
416
112
0,20
(kg)
8,0
Lateral caps in ABS
U12M
86
3.000
12
RGBW
530
475
416
112
0,20
8,0
Tempered glass screen (4 mm)
U12H
127
3.800
12
RGBW
700
475
416
112
0,20
8,0
on request
[°°]: 00 - 80 - 56 - 30 - 16
Adjustable stainless steel bracket
[*]: GR (BODY: Anodized Grey / CAPS: RAL 7035) - NE (BODY: Black Satin / CAPS: RAL 7024) - FS (BODY: Smokey Grey Satin / CAPS: RAL 7024)
Power factor : > 0.97
Power (W) - effective value of the fixture
η >95lm/W
LED Driver DMX integrated
LED quadrichip Cree
multicolor type RGBW
APPLICATIONS
Outdoor sport facilities
Parking areas
Road and pedestrian tunnels
Civic and private parks
Urban and suburban roads
Architectural and museum
Large areas and infrastructure
– SYMMETRIC [00]
PHOTOMETRY
– SYMMETRIC [80]
Symmetric wide beam
250
C0-C180
Symmetric narrow beam
450
C90-C270
C0-C180
– SYMMETRIC [56]
C90-C270
– SYMMETRIC [16]
– SYMMETRIC [30]
1.800
1.200
C0-C180
CHARACTERITICS
Standard
C0-C180
C90-C270
+45°C
-20°C
Optional
Eleva - 06/2014 - V. 2
IP66
3.000
C90-C270
IK08
220
240
F
C0-C180
R
C90-C270
B
80.000 h
8,0 Kg
0,200
125
280
www.niteko.com
Pag. 17
Halley
Street
Pag. 18
Tunnels
Urban
Photovoltaic
Industrial
Large Areas
www.niteko.com
Sports
Architectural
Commercial
Eleva - 06/2014 - V. 2
Halley
Made in Italy
GHOST-R
The best Performance
to your industrial Space
Eleva - 06/2014 - V. 2
www.niteko.com
Pag. 19
Halley
MAIN FEATURES
>80.000 h.
The external connector
ADVANTAGES
Pag. 20
www.niteko.com
Eleva - 06/2014 - V. 2
Halley
HALLEY
SIZE
(Ø) a
(Ø) a¹
h
(Ø) a¹
h¹
STANDARD COLOUR
(Ø) a
BODY: Anthracite Grey RAL7024
REF.: Anodized grey
DETAILS
Code
(W)
(lm)
LED n°
(mA)
CCT (K)
CRI (Ra)
a (mm)
a¹ (mm)
h (mm)
h¹ (mm)
(kg)
Technopolymer body
HALLEY
86
10.000
10
700
4000/5000
70...79
Ø 482
Ø 323
418
210
8,0
Anodized reflector
HALLEY
86
9.000
10
700
3000
70...79
Ø 482
Ø 323
418
210
8,0
PMMA transparent or frosted
HALLEY-16H-[K]
-GR
135
16.000
16
700
4000/5000
70...79
Ø 482
Ø 323
418
210
8,5
(optional) screen
HALLEY-16H-W
-GR
135
14.400
16
700
3000
70...79
Ø 482
Ø 323
418
210
8,5
Tempered glass optional
HALLEY-22H-[K]
-GR
188
22.000
22
700
4000/5000
70...79
Ø 482
Ø 323
418
210
10,0
Switch on-off time < 1 s
HALLEY-22H-W
-GR
188
19.800
22
700
3000
70...79
Ø 482
Ø 323
418
210
10,0
HALLEY-24X-[K]
-GR
250
30.000
24
850
4000/5000
70...79
Ø 482
Ø 323
418
210
11,5
HALLEY-24X-W
-GR
250
27.000
24
850
3000
70...79
Ø 482
Ø 323
418
210
11,5
Power factor: > 0.95
[K]: N (4000K ± 300K) - W (3000K ± 300K) - C (5000K ± 300K)
η >110lm/W
[KH-EM] Emergency Kit available on request: 4 LED - 100mA - 5W - 600 lm - Autonomy 1 h
Philips Lumileds
Available in IP20 on request
Active Cooling System
mounted on versions:
135W, 188W e 250W
APPLICATIONS
Industrial areas and warehouses
Commercial areas
DESIGN
Rapid connection
LED Technology
CHARACTERITICS
Standard
+45°C
-20°C
Optional
Eleva - 06/2014 - V. 2
125
280
3.000 K
5.000 K
IP65
IK08
220
240
F
LED
4.000 K
70...79
80.000 h
10,0 Kg
IP20
www.niteko.com
Pag. 21
Halley
– SYMMETRIC [90]
PHOTOMETRY
Standard version with reflector
135W
500
C0-C180
C90-C270
188W
250W
5.000
5
5.000
5
5.000
5
7.000
7
7.000
7
7.000
7
9.000
9
9.000
9
9.000
9
– SYMMETRIC [00]
Version without reflector
135W
250
C0-C180
C90-C270
188W
250W
7.000
5
7.000
5
7.000
5
9.000
7
9.000
7
9.000
7
11.000
9
11.000
9
11.000
9
ENERGY SAVING
450 W
Traditional 400W
43,2 %
225 W
150 W
75 W
Actual
Consumption
440 W
Actual
Consumption
250 W
Recessed mounting
Traditional 250W
250 W
200 W
Halley 16H
150 W
100 W
50 W
0
MUNTING ACCESSORIES
300 W
Actual
Consumption
285 W
Actual
Consumption
135 W
r Reduct
we
n
io
Halley 24X
n
io
300 W
Po
375 W
r Reduct
we
Po
Examples pf comparition
52,6 %
0
KM-H-INC
Recessed mounting Kit
This mounting kit is particularly suitable in
case of tfalse ceiling.
(Example: airport, service station, industrial
structures)
ADDITIONAL ACCESSORIES
Transparent or frosted glass
KH-V/C
KH-V/S
KH-D/S
KH-R/P
Transparent tempered glass
Frosted tempered glass
Frosted PMMA diffuser
Prismatic PMMA rfector
PMMA transparent or frosted
(optional) screen
Prismatic PMMA rfector
Pag. 22
www.niteko.com
Eleva - 06/2014 - V. 2
Halley
COMPONENTS
ACS (Active Cooling System)
Structure with fissures
Temperature Reading LED
for heat dissipation
solder point
Microcontroller computing
Very low noise fan with
speed regulation
Mounted on versions:
135W, 188W e 250W
ACS grants also longer lifetime
of LED’s and fitting
Eleva - 06/2014 - V. 2
www.niteko.com
Pag. 23
Street
Pag. 24
Tunnels
Urban
Photovoltaic
Industrial
Large Areas
www.niteko.com
Sports
Architectural
Commercial
Eleva - 06/2014 - V. 2
Made in Italy
GHOST-R
nformity
Co
Prog
ra
m
uct
od
KSA
PCP
Pr
The new LOOK of the Street
Eleva - 06/2014 - V. 2
www.niteko.com
Pag. 25
MAIN FEATURES
Asymmetrical street lens with high precision collimators for light beam concentration.
>80.000 h.
ADVANTAGES
weather conditions.
down.
Pag. 26
www.niteko.com
Eleva - 06/2014 - V. 2
FUTURA
SIZE
b
h
a
STANDARD COLOUR
(Ø) 65 mm
Anthracite Grey RAL 7024
DETAILS
Aluminium die cast body
Code
(W)
(lm)
n° LED
(mA)
CCT (K)
CRI (Ra)
a (mm)
b (mm)
h (mm)
W.Exp. (m²)
(Kg)
F24L-[K]01-AN
26
3.510
24
350
4000/5000
70...79
730
288
157
0,074
10,5
F24L-W01-AN
26
3.160
24
350
3000
70...79
730
288
157
0,074
10,5
on request
F24M-[K]01-AN
41
4.950
24
530
4000/5000
70...79
730
288
157
0,074
10,5
Securing glass frame in ABS
F24M-W01-AN
41
4.460
24
530
3000
70...79
730
288
157
0,074
10,5
Sectioning flips in ABS
F24H-[K]01-AN
56
6.240
24
700
4000/5000
70...79
730
288
157
0,074
10,5
Tempered glass 4 mm
F24H-W01-AN
56
5.610
24
700
3000
70...79
730
288
157
0,074
10,5
Optical compartment IP66
F43M-[K]01-AN
73
8.870
43
530
4000/5000
70...79
730
288
157
0,074
10,5
Control gear compartment IP43
F43M-W01-AN
73
7.980
43
530
3000
70...79
730
288
157
0,074
10,5
Road Asymmetric photometry
F36H-[K]01-AN
83
9.360
36
700
4000/5000
70...79
730
288
157
0,074
10,5
F36H-W01-AN
83
8.420
36
700
3000
70...79
730
288
157
0,074
10,5
F43H-[K]01-AN
100
11.180
43
700
4000/5000
70...79
730
288
157
0,074
10,5
F43H-W01-AN
100
10.060
43
700
3000
70...79
730
288
157
0,074
10,5
F52H-[K]01-AN
120
13.520
52
700
4000/5000
70...79
730
288
157
0,074
10,5
F52H-W01-AN
120
12.170
52
700
3000
70...79
730
288
157
0,074
10,5
F60H-[K]01-AN
140
15.600
60
700
4000/5000
70...79
730
288
157
0,074
10,5
η >110lm/W
F60H-W01-AN
140
14.040
60
700
3000
70...79
730
288
157
0,074
10,5
F68H-[K]01-AN
157
17.680
68
700
4000/5000
70...79
730
288
157
0,074
10,5
F68H-W01-AN
157
15.910
68
700
3000
70...79
730
288
157
0,074
10,5
LED monochip Cree
[K]: N (4000K ± 300K) - W (3000K ± 300K) - C (5000K ± 300K)
[KF-12V] Available for photovoltaic application (power supply 12V d.c. )
[KF-24V] Available for photovoltaic application (power supply 24V d.c. )
APPLICATIONS
Highways
Urban Roads
Suburban roads
[KF-GSM]
Private street
Squares
Cycling lanes
Parking areas
Innovative Design
CHARACTERITICS
Standard
uct
od
Pr
Eleva - 06/2014 - V. 2
+45°C
KSA
125
280
-20°C
Prog
ra
Optional
LED Technology
nformity
Co
PCP
m
DESIGN
12V
24V
3.000 K
IP66
IK08
220
240
F
LED
4.000 K
70...79
80.000 h
10,5 Kg
0,074
5.000 K
www.niteko.com
Pag. 27
SYMMETRIC [01]
PHOTOMETRY
Asymmetric photometry
500
C0-C180
C90-C270
ENERGY SAVING
300 W
Traditional 250W
44,9 %
150 W
100 W
50 W
Actual
consumption
285 W
Actual
consumption
157 W
180 W
150 W
120 W
Futura F43H
90 W
60 W
30 W
0
Traditional 150W
Actual
consumption
168 W
Actual
consumption
100 W
r Reduct
we
n
io
Futura F68H
on
200 W
Po
250 W
r Reducti
we
Po
Examples pf comparition
40,5 %
0
APPLICATION EXAMPLE
Assisted lighting design
OTHER APPLICATIONS
Photovoltaic
Pag. 28
KF-12V
KF-24V
Power supply 12V d.c.
www.niteko.com
Eleva - 06/2014 - V. 2
MOUNTING OPTIONS
On double arm-pole
On single arm-pole
Standard mounting
on arm-pole
MOUNTING ACCESSORIES
Optional mounting
KM-F-TP
KM-F-OR
Fixed head-pole
Adjustable head –pole
on head-pole
250 mm
Eleva - 06/2014 - V. 2
(Ø) 60 mm
170 mm
260 mm
(Ø) 60 mm
220 mm
www.niteko.com
Pag. 29
Street
Pag. 30
Tunnels
Urban
Photovoltaic
Industrial
Large Areas
www.niteko.com
Sports
Architectural
Commercial
Eleva - 06/2014 - V. 2
Made in Italy
Look at the street
with a different vision
Eleva - 06/2014 - V. 2
www.niteko.com
Pag. 31
MAIN FEATURES
Closing stainless still clips.
Asymmetrical street lens with high precision collimators for light beam concentration.
>50.000 h.
ADVANTAGES
5-year warranty.
Pag. 32
www.niteko.com
Eleva - 06/2014 - V. 2
GUIDA
SIZE
b
h
(Ø) 65 mm
STANDARD COLOUR
a
Anthracite Grey RAL 7024
DETAILS
Code
(W)
(lm)
n° LED
(mA)
CCT (K)
CRI (Ra)
a (mm)
b (mm)
h (mm)
W.Exp. (m²)
(Kg)
G3H-[K]A1-AN
27
3.000
3
700
4000/5000
70...79
620
290
152
0,050
8,5
Optional color
G3H-WA1-AN
27
2.700
3
700
3000
70...79
620
290
152
0,050
8,5
Grey RAL 7035
G4H-[K]A1-AN
35
4.000
4
700
4000/5000
70...79
620
290
152
0,050
8,5
Tempered glass 4 mm
G4H-WA1-AN
35
3.600
4
700
3000
70...79
620
290
152
0,050
8,5
Assymetric street lens
G5H-[K]A1-AN
44
5.000
5
700
4000/5000
70...79
620
290
152
0,050
8,5
G5H-WA1-AN
44
4.500
5
700
3000
70...79
620
290
152
0,050
8,5
G6H-[K]A1-AN
52
6.000
6
700
4000/5000
70...79
620
290
152
0,050
8,5
G6H-WA1-AN
52
5.400
6
700
3000
70...79
620
290
152
0,050
8,5
G7H-[K]A1-AN
61
7.000
7
700
4000/5000
70...79
620
290
152
0,050
8,5
G7H-WA1-AN
61
6.300
7
700
3000
70...79
620
290
152
0,050
8,5
G8H-[K]A1-AN
69
8.000
8
700
4000/5000
70...79
620
290
152
0,050
8,5
G8H-WA1-AN
69
7.200
8
700
3000
70...79
620
290
152
0,050
8,5
η >110lm/W
G9H-[K]A1-AN
78
9.000
9
700
4000/5000
70...79
620
290
152
0,050
8,5
G9H-WA1-AN
78
8.100
9
700
3000
70...79
620
290
152
0,050
8,5
[K]: N (4000K ± 300K) - W (3000K ± 300K) - C (5000K ± 300K)
Philips Lumileds
[KG-12V] Available for photovoltaic application (power supply 12V d.c. )
[KG-24V] Available for photovoltaic application (power supply 24V d.c. )
APPLICATIONS
Urban Roads
Suburban roads
Private street
[KG-GSM]
Squares
Cycling lanes
Parking areas
Pedestrian areas
DESIGN
Innovative Design
CHARACTERITICS
Standard
LED Technology
+45°C
-20°C
Optional
Eleva - 06/2014 - V. 2
125
280
12V
24V
IP65
3.000 K
IK08
220
240
F
LED
4.000 K
70...79
50.000 h
8,5 Kg
0,050
IP66
5.000 K
www.niteko.com
Pag. 33
PHOTOMETRY
Asymmetric photometry
300
C0-C180
C90-C270
ENERGY SAVING
120 W
Traditional 100 W
45,2 %
60 W
40 W
20 W
Actual
consumption
115 W
Actual
consumption
63 W
90 W
75 W
60 W
Guida G5H
45 W
30 W
15 W
0
Traditional 70 W
Actual
consumption
81 W
Actual
consumption
45 W
r Reduct
we
n
io
Guida G7H
on
80 W
Po
100 W
r Reducti
we
Po
Examples of comparision
44,4 %
0
APPLICATION EXAMPLE
Assisted lighting design
OTHER APPLICATIONS
Photovoltaic
Pag. 34
KG-12V
KG-24V
www.niteko.com
Eleva - 06/2014 - V. 2
MOUNTING OPTION
On head-pole
On arm-pole
Adjustable mounting system
in the fitting
Eleva - 06/2014 - V. 2
www.niteko.com
Pag. 35
Street
Pag. 36
Tunnels
Urban
Photovoltaic
Industrial
Large Areas
www.niteko.com
Sports
Architectural
Commercial
Eleva - 06/2014 - V. 2
Made in Italy
GHOST-R
The technology of the future
& the charm of the past
Eleva - 06/2014 - V. 2
www.niteko.com
Pag. 37
MAIN FEATURES
Asymmetrical and rotosymmetrical Optics.
>50.000 h.
-
ADVANTAGES
-
recycled.
Pag. 38
www.niteko.com
Eleva - 06/2014 - V. 2
ZENITH
SIZE
h
STANDARD COLOUR
a
Antiqued Black
DETAILS
Code
(W)
(lm)
(mA)
CCT (K)
CRI (Ra)
a (mm)
h (mm)
(kg)
Z4
35
4.000
4
700
4000/5000
70...79
425
760
10,5
Assymetric and roto symmetric
Z4
35
3.600
4
700
3000
70...79
425
760
10,5
photometry
Z6H
52
6.000
6
700
4000/5000
70...79
425
760
10,5
Z6H
52
5.400
6
700
3000
70...79
425
760
10,5
Z8H
69
8.000
8
700
4000/5000
70...79
425
760
10,5
Z8H
69
7.200
8
700
3000
70...79
425
760
10,5
LED n°
[K]: N (4000K ± 300K) - W (3000K ± 300K) - C (5000K ± 300K)
[°°]: A1 - R1
η >110lm/W
[KU-GSM]
Philips Lumileds
APPLICATIONS
Urban design
Old town center
Squares
Boulevards
Pathways
Parks
Gardens
Pedestrian areas
OTO-SYMMETRIC [R1]
PHOTOMETRY
300
C0-C180
240
C90-C270
CHARACTERITICS
Standard
C0-C180
+45°C
-20°C
Optional
Eleva - 06/2014 - V. 2
IP65
C90-C270
IK07
220
240
F
LED
4.000 K
70...79
50.000 h
10,5 Kg
125
280
3.000 K
5.000 K
www.niteko.com
Pag. 39
Victoria
Street
Pag. 40
Tunnels
Urban
Photovoltaic
Industrial
Large Areas
www.niteko.com
Sports
Architectural
Commercial
Eleva - 06/2014 - V. 2
Victoria
Made in Italy
Light up the History
Eleva - 06/2014 - V. 2
www.niteko.com
Pag. 41
Victoria
MAIN FEATURES
>50.000 h.
On Pole.
ADVANTAGES
-
sembled and recycled.
Pag. 42
www.niteko.com
Eleva - 06/2014 - V. 2
Victoria
VICTORIA
SIZE
h
STANDARD COLOUR
a
Antiqued Black
DETAILS
Code
(W)
(lm)
(mA)
CCT (K)
CRI (Ra)
a (mm)
h (mm)
(kg)
V4
35
4.000
4
700
4000/5000
70...79
530
800
13,0
V4
35
3.600
4
700
3000
70...79
530
800
13,0
photometry
V6H
52
6.000
6
700
4000/5000
70...79
530
800
13,0
V6H
52
5.400
6
700
3000
70...79
530
800
13,0
V8H
69
8.000
8
700
4000/5000
70...79
530
800
13,0
V8H
69
7.200
8
700
3000
70...79
530
800
13,0
LED n°
[K]: N (4000K ± 300K) - W (3000K ± 300K) - C (5000K ± 300K)
[°°]: A1 - R1
η >110lm/W
[KU-GSM]
Philips Lumileds
APPLICATIONS
Urban design
Old town center
Squares
Boulevards
Pathways
Parks
Gardens
Pedestrian areas
OTO-SYMMETRIC [R1]
PHOTOMETRY
300
C0-C180
C90-C270
CHARACTERITICS
Standard
+45°C
-20°C
Optional
Eleva - 06/2014 - V. 2
240
C0-C180
IP65
IK07
C90-C270
220
240
F
LED
4.000 K
70...79
50.000 h
13,5 Kg
125
280
3.000 K
5.000 K
www.niteko.com
Pag. 43
Street
Stradale
Pag. 44
Tunnels
Gallerie
Urban
Photovoltaic
Industrial
Large Areas
www.niteko.com
Sports
Architectural
Commercial
Eleva - 06/2014 - V. 2
Made in Italy
GHOST-R
Technology meets tradition
Eleva - 06/2014 - V. 2
www.niteko.com
Pag. 45
MAIN FEATURES
>50.000 h.
ADVANTAGES
time.
Pag. 46
www.niteko.com
Eleva - 06/2014 - V. 2
URBAN KIT
SIZE
h
b
b
h
a
a
Code
(W)
(lm)
(mA)
CCT (K)
CRI (Ra)
a (mm)
b (mm)
h (mm)
(kg)
K4
35
4.000
4
700
4000/5000
70...79
239
205
53
2,5
K4
35
3.600
4
700
3000
70...79
239
205
53
2,5
photometry
K6H
52
6.000
6
700
4000/5000
70...79
239
205
53
2,5
K6H
52
5.400
6
700
3000
70...79
239
205
53
2,5
K8H
69
8.000
8
700
4000/5000
70...79
239
205
53
2,5
K8H
69
7.200
8
700
3000
70...79
239
205
53
2,5
DETAILS
LED n°
[K]: N (4000K ± 300K) - W (3000K ± 300K) - C (5000K ± 300K)
[°°]: A1 - R1
η >110lm/W
Philips Lumileds
APPLICATIONS
Urban design
Old town center
Squares and pedestrian areas
Boulevards, parks and gardens
INSTALLAZIONE KIT
1 - Remove the old discharge lamp
2 - Insert the URBAN KIT
URBAN KIT
TRADITIONAL LANTERN
OTO-SYMMETRIC [R1]
PHOTOMETRY
300
C0-C180
Eleva - 06/2014 - V. 2
240
C90-C270
CHARACTERITICS
Standard
Optional
LED MODULE
DISSIPATOR
DRIVER
DISCHARGE LAMP
3 - Lantern with URBAN KIT
C0-C180
+45°C
220
-20°C
240
C90-C270
F
LED
4.000 K
70...79
50.000 h
2,5 Kg
125
280
3.000 K
5.000 K
www.niteko.com
Pag. 47
SYMBOLS GUIDELINES
Application
Street
Large areas
Tunnels
Sports
Urban
Architectural
Photovoltaic
Commercial
Industrial
Light source icons
LED
LED
T8
LED
LED source
LED TUBE
LED Tube (Ø 26 mm - Base G13)
R
B
LED
LED RGBW
RGBW LEDS source
LED LAMP
Base type
XXX
General icons
nformity
Co
Prog
ra
m
uct
od
KSA
PCP
Pr
00V
F
+00°C
-00°C
Pag. 48
CE
CE Certificate
Wide beam
The fixture has a wide beam emission
TUV
TUV Certificate
Spot beam
The fixture has a narrow beam emission
GHOST-R
GHOST-R Certificate
Asym. beam
The fixture has an asymmetric beam emission
KSA-PCP
KSA-PCP Certificate
Elliptic
The fixture has an elliptic beam emission
RoHS
RoHS Certificate
Cut-off
Fixture with a limited upward dispersion of the luminous flux
UV Emission
Absent
SPD
Surge Protection Device (10 kV)
Indoor
Suitable only for indoor installation
Lifetime
Life Span (L70)
Outdoor
Suitable only for oudoor installation
IK00
IKXX
Degree of shock resistance
In/Outdoor
Suitable for both indoor and outdoor installation.
IPXX
IPXX
Degree of protection
Classe I
Class I fixture (single insulation)
CRI
Chromatic Rendering Index (Ra)
Classe II
Class II fixture (double insulated)
0.000 K
CCT
Correlated colour temperature
[W (3000K ± 300K) - N (4000K ± 500K) - C (5500K ± 500K)]
Classe III
Class III fixture
Exposure
Wind exposure
AC Voltage
Voltage of the fixture
Max weight
Maximum weight of the fixture
DC Voltage
Voltage of the fixture
Kit emergenza Emergency Kit (1 h)
Flammability
Suitable for installation on flammable surfaces
Remote Control Automatic luminous
Anti-corrosion
Coating that affords the fixture protection against chemicals
Pre-programm. Flux regulator
Energy Saving
Fixture with high energy efficiency
Dimmable
Eco-friendly
Recyclable fixture
Not dimmable Uncompatible with a device that varies the light intensity
Temperature
Maximum and minimum operating temperature
Camera
www.niteko.com
Via DALI Protocol or 1-10V Analog Protocol
With IP-Camera on board
Eleva - 06/2014 - V. 2
TELECONTROL
AND FLOW ADJUSTMENT
How to reduce consumption
and save money in a smart way
of maintenance costs with at least an
compared to a device that does not have it.
,
SELF-ADJUSTNG FLOW
CABLE ADJUSTMENT
RADIO WAVES CONTROL
Eleva - 06/2014 - V. 2
www.niteko.com
Pag. 49
REMOTE CONTROL
Urano
Halley
Victoria
1. Cost optimization of personnel and vehicles.
2.
3.
Pag. 50
www.niteko.com
Eleva - 06/2014 - V. 2
NITEKO lamps can be equipped with a self adjusting flow , integrated in the luminaire, suitable for the control and reduction of the luminous
flux of the lamp by 20% up to 100% of the maximum value, without using dedicated cables. The device is equipped with a fully programmable
microcontroller, able to manage the power supply section of the unit, of any load of LED light sources (on, off, testing of correct operation,
adjustment of the luminous flux), the operation is based on possibility to define, by preprogramming 5 levels of brightness, on a time basis, set
by configuration software.
The system calibrates the "Midnight point" during the period of time the unit is powered, allowing , through the settings selected by the software, a reduced capacity.
100%
D1
ON
D5
80%
D2
60%
D4
40%
Test of
D3
20%
0%
12:00
15:00
17:00
19:00
21:00 23:00
20:00
01:00
03:00
05:00
07:00
6:00
09:00
11:00
10:00
Through the use of dedicated cables , with the DIM module it is possible to manage and adjust the light intensity of Niteko lamps by a 1-10V
analog signal . Using instead, the DALI interface module, it is possible an intelligent management of the light according to the specific needs of
the environment to be illuminated.
DALI is a digital communication protocol of the dimmable electronic ballasts . This new interface standard represents a system with distributed
intelligence . This means that the values of light emission of different lighting scenarios and the grouping of different light sources are stored
within the electronic power supplies . The control system has only the function to invoke a given scenario and electronic power supply, who
knows his level of light output and acts accordingly. It is possible also to call each single power supply . To ensure interchangeability between
DALI components from different manufacturers, the DALI interface has been included as Appendix E of IEC 929 rules , becoming in this way a
non-owner standard , able to meet all the requirements of modern light control.
Eleva - 06/2014 - V. 2
www.niteko.com
Pag. 51
R
ALIGHT, the new
of remote lighting control.
connection with other lighting points.
SMS
PLUG’N PLAY
A simple click to be connected
SOFTWARE LCG
GSM
FUTURA FIXTURE
Moreover...
1
2
ALIGHT Technology is available on:
Urano
ALIGHT IS A CLOUD
Victoria
Power line comunication
The system uses the Power Line Communication (PLC ) : it is a technology for the transmission of data through the electric supply
system . It is realized by overlapping the transport of electrical current signal to a higher frequency which is modulated by the
information to be transmitted. The separation of the two kinds of currents is performed by filtering and separating the frequency
interval used.
Features of PLC communication:
the network.
the system is also a signal repeater . The system consists of an electronic ballast with integrated remote control device and a control
unit that collects data from the spots lighting, communicates with the remote control management and sends commands on-off –
adjustment point to point
The communication between
the control unit and the
control management is made
through modem GSM/GPRS
on Ethernet interface
Assistance
Setting 1
Maintenance
Setting 2
Control Unit
Setting 4
Internet
Setting 3
Server
Management center
The communication between
the spots lighting and the
panels made through power
line communication on the
existing electric line
Pag. 54
www.niteko.com
Eleva - 06/2014 - V. 2
Architecture
The software can be installed on a standard PC in a few minutes, allows to enter detailed information for each point (example: pole number,
fitting model, power and lamp type) and to operate in total autonomy on each spot light
Functions
Configuration and change of the behavior of each spot light and / or point groups with the same
behavior (on, off, profiling and adjustment according to the time schedules and weekly programming)
Collecting data via web on point-to-point operation (voltage, current, Pass, cosø, Ta, Vlamp).
Anomaly signal (exp. faulty lamp, end of life lamp, absence of one or more phases, lack of communication
with one or more points).
Monitoring of consumption and electrical-level framework (with reports and historical trends).
The control unit continuously
collects the operating
parameters of the light
fixtures and report any
anomalies (example lamp off)
Management center
Maintenance
Control Unit
Internet
Server
Management center
Communication characteristics LPL:
Through the LPL module bidirectional it is possible to manage and adjust the flow of light through an analog signal 1-10V, without
the use of dedicated cables, but simply taking advantage of the power wires of the devices.
Eleva - 06/2014 - V. 2
www.niteko.com
Pag. 55
OVERVOLTAGE
MANAGEMENT OF OVERVOLTAGEFOR ELECTRONIC EQUIPMENT
The problem of overvoltage due to direct and indirect current
discharge is present very clearly in electronic equipments.
Are affected by this issue, all appliances powered with electronic
devices , from cameras to lighting fittings . The issue can affect any
type of installation, but it is also true that in the case of plants in
urban center or in specially protected areas , the percentage of the
problem is practically not existing. A lighting fixture installed in a
standard electrical system is often subjected to over voltage and
external interferences due to various causes: insertion of discontinuous loads on the line, fault lines in upstream or downstream ,
atmospheric discharges (lightning ) . The capacity to be protected
against overvoltage is therefore fundamental to the reliability and
proper functionality of the product, that owing to these disorders
may be damaged or malfunction . In the LED fixture , where the
electronic components are predominant , resistance to overvoltage
becomes even more necessary .
- type of system ( overhead wire or Ground)
- type of support ( metallic or not )
- supply line lengh
- insulation class ( presence of PE earth wire or of a foudation earth
for each pole , etc.).
MINIMUM PRODUCTS REQUIREMENTS
The feature of overvoltage protection is regulated by a specific
standard (EN 61547 ), which establishes the minimum levels of
product , ensuring compliance with the essential requirements of
the Directive on Electromagnetic Compatibility , mandatory for CE
marking of the product.
Based on the experience , Niteko proposes the steps that can be
taken into consideration to protect the LED products .
The LED fixtures NITEKO are equipped as standard with a surge
protection device , it is a varistor which is activated when the fitting
is subjected to a high voltage . In the case of products in insulation
class II ( no earth wire ), the device is always present, but its proper
functioning is related primarily to the type of system it is installed on
the device . The plants can be of various types, they differ mainly in
design philosophy . The issues to be considered are:
the system is in insulation class II ?
The poles are equipped with a ground connection ?
The electrical panel is equipped with a ground connection ?
The system is completely underground or has overhead wire ?
Case 1. Plant completely in insulation class II ( panel and poles
without earthing systems, generally more recent ) . In this case the
solution that better protects the equipment, is to mount on the
electrical panel an arrester voltage for each phase and provide the
electrical panel for a ground connection. Alternatively equip each
connecting pole to the ground with an appropriate voltage discharger and fuse.
SYSTEM PROTECTION
The atmosfepheric discharge are events highly uncertain .
It is not possible to foreseen:
- the location
- the intensity
- the moment when such an event will occur.
Case 2. Plant in class II , but the poles are provided with earth
connection.
In this case we propose to mount the discharger voltage directly on
in the terminal of the pole or lamp by connecting it to ground .
The protection provided on NITEKO appliances is an important
protection , but it can be in some cases not enough when the
weather events, to which the appliances are subjecte, exceed the
levels tested in the laboratory, by the surge tests above described.
In both cases, the disgarcher protects the product from surges
arriving from upstream with respect to the device.
Obviously if the over voltage comes in a direct way or from area
located downstream of the SPD device, the device is much more
vulnerable.
In final analysis , given the various types of cases and according to
the its experiance, Niteko suggests where possible, to install
equipment in insulation class I or insulation class II with a ground
pole or to a SPD.
It is important, that the system designer can choose ( coordinate )
the appropriate protection of plant taking into account:
- the characteristics of the device
- installation location , and its susceptibility to lightning (checking
for example maps of density of lightning that classify the area
accordingly to the frequency of lightning as show in the picture
below)
STREET LIGHTING
Type
Classe I
Classe II
Classe II+T
Protection level
Note
4 kV
Line/Neutral - Line/PE - Neutral/PE
+
K[S*]-SPD - Surge Discharger 10kV - Type II - 5kA
*S= Product code series (Es. Futura = “F”)
4 kV
4 kV
+
*S= Product code series (Es. Guida = “G”)
In class II equipment, the metallic housing of the device is
considered as terminal PE.
The protection is considered only if the connection of the earth
terminal on the pole SPD runs near the appliance. In case it is
connected the ground terminal of the SPD, the protection
TUNNEL LIGHTING
Type
Classe I
Classe II
Pag. 56
Protection level
Note
4 kV
+
*S= Product code series (Es. Urano = “U”)
4 kV
www.niteko.com
It is necessary equipotential bonding of the cable duct with the
earth wire of the discharger installed in the power supply.
In class II equipment, the metallic housing of the device is
considered as terminal PE.
Eleva - 06/2014 - V. 2
NORMS
1. STREET LIGHTING
1.1 Standard references
1.2 - Regional rules against lighting pollution
The Italian regulatory system has recently had a radical transformation due to the publication of the new European Standards on
lighting .
Moreover, in recent years many regions have issued laws against
light pollution , which content is more or less restrictive , but
tend to be similar . In general, these laws want to limit the
dispersion of light flow upward , due to the lighting fixtures
installed in areas external . Many standards, recommendations
and laws, are available today, in particular :
When a man enters light during the night in the external environment, outside of the space that is necessary to illuminate, and so
alters the amount of natural light present in this space, produces a
form of pollution called light pollution: a pollution of the natural
light product by artificial light.
Rules to limit light pollution in an effective manner:
1) The first indispensable criteria for effective limitation of light
pollution is to not overlighting. This means to limit the luminance
and illuminance level of the illuminated surfaces to what is actually necessary.
It also means not to apply more than the minimum levels required
by the rules of safety, when present, in order to ensure safety
without producing excessive light pollution.
When there are no specific rules, luminance levels should be
commensurate with those of the surrounding areas (in the best
laws and the best regulations, the limit of one candle per square
meter).
authority ;
tions of Comité Internationale de l' Eclairage ), often based on
national regulations or those of CEN .
Here below the main Rules and Legislative Requirements:
Provisions concerning the production of materials, equipment ,
Machinery , installations and electrical and electronic installations .
UNI 12665:2011 - Terms and fundamental criteria for lighting
requirements.
UNI EN 1332-1:2005 - Measurement and presentation of
photometric data of lamps and luminaires (Part 1: Measurement
and file format).
2) Foreseen the possibility of decreasing of the luminance and
illuminance levels in those hours in which the characteristics of
area use is permited. The lighting levels necessary for safety or for
the proper use of a certain type of area, indeed depend on the type
of use of the surface. If at certain hours changes the use of a
surface, lighting can be reduced (exp. When the trucks unloading
of goods is terminated in an industrial area or decreases the road
traffic ). If then, after a certain time the light is no longer used, it
would avoid unnecessary light pollution and energy waste by
turning off the system.
DECREE OF THE MINISTRY OF INFRASTRUCTURE AND
TRANSPORT November 5, 2001 , n.6792
- Functional and geometric guidelines for the construction of
roads
UNI EN 11248:2012 - Street lighting - Selection of lighting
categories.
UNI EN 13201-2:2004 - Street Lighting ( Part 2: Performance
requirements ) .
UNI EN 13201-3:2004 – Street Lighting ( Part 3: Calculation of
performance).
UNI EN 13201-4:200t4 - Street Lighting ( Part 4 : Methods of
measurement of photometric performance ).
UNI EN 10819:1999 - Outdoor lighting installations .
Requirements for the limitation of the dispersions upward of
luminous flux .
3) Minimize the direct dispersion of light by the lighting equipment
outside the areas to be illuminated. In an effective law against
light pollution is fundamental and indispensable the obligation to
use fully shielded luminaires in all plants , public and private
(ie.having an emission of 0 cd / klm at 90 degrees and beyond
compared to the vertical downward ) . In fact, even when the
luminous flux emitted upward by luminaires seems negligible
compared to that reflected from surface , in reality it is the fundamental part of the flow pollutant at a certain distance from the
source . The effects of light pollution depend on the direction of
emission. Lighting equipment and surfaces distribute their light
differently in different directions. Usually just the lighting fixtures
are the ones producing more emissions in the most polluting
directions, whose where light pollution spreads in a wider area
and adds more effectively to emissions of other plants. Therefore to
reduce the effect of lighting entries in the atmosphere is essential
to minimize, as much as possible the upward release of the equipment. This is actually achievable through a careful design and
careful selection of lighting fixtures based on their characteristics
and performance.
In addition to compliance with laws and regulations , design can
be subject to other requiremets:
UNEL and UNI Standards with respect to the materials already
unified , systems and their components , the project crieria,
execution and testing modality, etc. .
Any other prescription , regulation, recommendation and
direction from any other entities (Culture, Fine Arts, the Supervisory Authorities, Municipal Technical Office), issued and
applicable to installations covered by this report.
Eleva - 06/2014 - V. 2
www.niteko.com
Pag. 57
1.3 - Determination of road type
According to the current legislation, a road classification is made for the purposes of determining the applicable lighting category .
This classification applies to fixed lighting systems designed to provide users of the road , for vehicles and pedestrians, good visibility conditions
during periods of darkness , with the intent to guarantee an adequate level of safety .
Here below are reported the descriptions of the various lighting categories:
Reference Lighting category :
this category is derived directly from laws and industry standards , the classification is not normally responsibility of the designer, but the same
can help in identifying the correct classification ;
Design lighting category :
depends on the application of parameters of influence and specifies the lighting requirements to be considered in the plant design.
Operating lighting categories:
in relation to the analysis of the parameters of influence ( risk analysis) and reducing energy consumption , are those categories that take into
account the change during the time of the parameters of influence, such as in road environment, and the modification of the traffic flow during
the day.
Here below are reported the prospect 1 of the road lighting standard UNI EN 11248:2012
Road Type
A1
A2
B
Road Type description
Speed limit
[Km h]
130 - 150
130
Extra urban highways
Service road to Extra urban highways
Service roads urban highways
Main extra urban roads
Service road to main extra urban roads
Extra urban highways service roads (type c1 and type c2)
C
Secondary extra urban road
Secondary extra urban road with specific limit
D
E
Local extra urban road
Local urban road : old city center, environmental zone , zone 30
Local urban road: other situations
Local urban road: pedestrian areas
Local urban road: old city centers (main users: pedestrians, admitted by pedestrians)
International local road
Pag. 58
Entrance
Lighting Category
and risks analysis
ME1
70-90
50
110
70-90
ME2
ME3b
70-90
50
ME2
ME3b
70-90
70
ME2
ME2
ME2
50
50
50
70-90
ME2
ME3b
ME2
50
30
50
ME3b
S2
ME3b
30
30
CE3
5
5
50
30
Cycle and pedestrian itineraries
/
Road with particular destination
30
www.niteko.com
CE4/S2
CE4/S2
S2
Eleva - 06/2014 - V. 2
2. TUNNEL LIGHTING
2.1 - Principles to be adopted for the lighting of
tunnels
1.4 - Risk Analysis
The risk analysis is the evaluation of the influence of parameters
in order to identify the lighting category that ensures the
maximum effectiveness of the lighting fitting contribution, to
the safety of road users in night conditions, and minimizing, at
the same time, energy consumption, installation costs and
environmental impact management . In relation to a detailed
preliminary study of the risk, it is detected the lighting project
category (concerning a traffic flow maximum of 100%), and
subsequently , considering an effective traffic flow, it is individuated lighting category of exercise.
A parameter that can change the lighting category and the color
of light: with color rendering index greater than or equal to 60
you can reduce the lighting while with color index less than 30,
you must increase the lighting category.
The principles that should be adopted in dealing with the
problem of illumination of a tunnel can be summarized as
follows:
both day and night;
change in driving conditions without developing a sense of
uncertainty, or still worse , of fear,
reflected glare, and a good level of vertical illumination to enable
the presence of obstacles.
The parameters that must be taken into consideration for the
project development of the tunnel lighting are the following:
1.5 - Lighting of roundabouts and intersections
the portal of entry;
The roundabout intersections and access roads ( access and exit
arms ) to the lighted roundabouts , due to their geometric and
functional characteristics, can be illuminated by applying the
categories of lighting series CE , supplemented by the requirements of debilitating dazzling. The selected lighting category
should be grater of one level, than the largest ones referred to
maximum speed expected by the intersection distance.
In order to adapt the vision from the external value of the
luminance, in daylight, to the internal value, and to ensure that
this passage takes place smoothly, you must divide the length of
the gallery in different areas where the value of the ratio of
luminance between two neighboring zones decreases appropriately.
class ME3 , the intersection should be applied in the lighting
roundabouts not illuminated , however, it is recommended to
take the lighting category CE1 . If one or more of the access roads
are not illuminated , the reference is provided for the lighting
class for these roads . It should adopt a descending lighting in the
transition zone between the dark zone and the illuminated one .
The length of this zone, on every access road not illuminated, it
should not be less than distance traveled in 5 seconds at the
maximum speed expected by the intersection distance.
The zones are :
Access zone: section of road just before the entrance to the
tunnel. Its length is equal to the stopping distance . In this area,
the driver of the vehicle must be able to recognize possible
obstacles present inside the itinerary.
Entry zone: this is the section of road immediately sub-sequent
the entrance to the tunnel . Its length must at least respect the
stopping distance . The lighting of this section , with respect to
the external light , must ensure the lowest possible overhang
and allow the driver to identify a possible obstacle from the
stopping distance .
Transition zone: section of road immediately after the entry
zone and previous to the inner one . In this area the luminance
levels are reduced compared to the values of entry , so to allow
the driver of the vehicle to adapt himself slowly to the lowest
levels of luminance of the inner zone .
Inner Zone: this area extends from the end of the transition
zone to the beginning of the exit zone. The levels of luminance
must ensure the driver, a drivie in complete safety.
Exit Zone : the last part of the tunnel where the driver's visibility
is affected by external light.
An "adaptive" Lighting, in some cases, may be necessary.
Eleva - 06/2014 - V. 2
www.niteko.com
Pag. 59
3. LIGHTING OF LARGE
OUTDOOR AREAS
4. LIGHTING
OF SPORTS AREAS
3.1 - Large areas lighting - tower Light
4.1 - Determination of the type of sports activity
The lighting of large outdoor areas include parking lots, marshalling and industrial storage areas, large squares and junctions,
service areas, port areas and all the places where you need a
proper level of illumination for the safety of persons and activities.
The lighting of the sports areas , whether indoors or outdoors,
requires today a specific expertise in the lighting design .
A first analysis we can say that the sporting environments are
very different one from another , from areas dedicated to
amateur sports to the one dedicated to agonistic activities .
In fact , depending on the type of activity and the degree of
competitiveness , are required different illuminance levels
(horizontal and vertical ) and uniformity.
In general the lighting design of these spaces must meet some
basic parameters such as:
safer, the passing and stop places areas and areas with activities
of public interest;
The lighting requirements must take into account many details :
the type of sport, speed and movements of the players, the size
and the speed of the ball, the position of the spectators.
As a result , the lighting must presuppose the knowledge of the
relevant legislation , the type of sport and the context in which
the sport takes place . Not to be forgotten are also the galleries,
stands, and sites devoted to the location of the cameras for
shoot, if foreseen .
creating glare dispersion or harassing dazzle;
directions;
illumination used must be adapted to ensure greater efficiency
of the plant in relation to the levels of illuminance and energy
saving
When performing the lighting calculation, in the first place it
should be considered what kind of sport is dedicated to the
studied area, in order to establish the necessary lighting
parameters. Afterword it is necessary to understand where to
place the devices in order to establish, through the calculation of
lighting, lens and power:
it must increase with the degree of difficulty of the task within
the area.
Classification of
the visual task
Average of illuminance
values maintained on
horizontal plane EAV
Uniformity
Emin / Emax
Prevention and Safey
Areas at low risk with only occasional traffic
5
are placed regularly on the ceiling or around the game area;
0,15
Areas at medium risk with moderate traffic
20
0,25
Areas at high risk (refineries)
50
0,40
centering optical to emphasize the more distant areas, are
installed on towers of different height according to the width of
the game.
Type of traffic
Pedestrian
5
Vehicular at low speed
20
0,15
Vehicular
50
0,40
20
0,25
Roughly
50
0,25
Normal
100
0,40
Fine
200
0,40
The rule establishes three "lighting classes," according to the
level of competition and the distance of the spectators from the
area where the competition takes place (see table):
Type of work
Very roughly
Competition level
Lighting class
I
II
III
International or national
Regional
Local
Training
Educational or leisure
ly facilities with a large capacity and large visual distance;
ly require facilities with capacity and medium visual distance;
require the presence of spectators.
Pag. 60
www.niteko.com
Eleva - 06/2014 - V. 2
5. INTERIOR LIGHTING
The following table provides for some sports activities, the
lighting features recommended by the Olympic Committee and
published on 10 July 2006.
Type of competition
5.1 - Interior lighting with artificial light
Lighting class
I
<50
II
<50
CIE 117
III
<55
In the reading of the table it is necessary to consider the
following aspects :
UNI EN 12464-1 standards " Lighting of workplaces .
Part 1: Indoor work places " defines the criteria for a proper
lighting design of indoor workplaces and provides, in order to get
a good visual performance , integration between artificial light
and natural light. The standard EN 12464-1 meets in the
satisfaction of three basic factors , the idea of lighting design in
the workplace:
and I of EN 12193;
contributes to improving the productivity of workers;
horizontal plane , which coincides with the surface area of activity ( surface of the water for swimming pools ) ;
out their task even in difficult conditions and for a long time;
Outdoor sports (GR)
Indoor sports (UGR)
affect the safety of the workers.
leisure (class III) and occasionally even for competitions at local
level (Class II) is recommended a partial switch-on;
The parameters that the rule takes into account to ensure
comfort , performance and safety , are the following:
recommended for outdoor sports facilities (index GR) . For indoor
environments, the UNI EN 12193 refers to the CIE publication
117 , which indicates exclusively the methods of calculation of
the UGR index without specifying the maximum levels to
guarantee for the different types of sporting activities. Therefore,
it is necessary to pay close attention to the selection , installation
and orientation of the floodlights, especially taking into account
the main directions of observation.
1 . Luminance distribution
2 . Illuminance and uniformity
3 . Glare and its limitation
4 . Direction of the light
5 . Chromatic aspects of light
6 . Flicker and stroboscopic effects
7 . Maintenance factor
8 . Energy saving
9 . Integration of daylight
10 . Illumination in the presence of video terminals
Eleva - 06/2014 - V. 2
www.niteko.com
Pag. 61
GENERAL SALES CONDITION
Niteko Srl general sale conditions shall apply to and are integral part of all quotations and offers, all acceptations , acknowledgments and orders
confirmation from the buyer and to all the sales contracts by Niteko Srl and for the purchase of goods and services by the buyer , except where
Niteko have explicitly agreed otherwise .
All terms and conditions in all the documents issued by the Buyer, either before or after issuance of any document from Niteko Srl , that refer to
these Terms and Conditions, are expressly rejected and not accepted and will not be in any way binding on Niteko
Niteko offers are valid only for the period of time indicated in the offer by Niteko and if the period is not specified, it will be valid 30 days from the
date of the offer.
PRICES:
The prices in any offer , confirmation or contract are expressed in Euro, delivery EX- WORKS ( in accordance with INCOTERMS latest version)
considering Niteko head office or other site designated by Niteko , unless otherwise agreed in writing between the Buyer and Niteko and does not
include taxes, duties or similar taxes, now or hereafter applicable. Except as otherwise agreed in writing between the Buyer and Niteko , prices
are those applicable at the date of the invoice , according to the applicable price list .
NON-STANDARD ITEMS :
Items marked " OPTIONAL " are normally not available in the warehouse , delivery dates and prices , unless specified , are to be agreed from time
to time depending on the quantity , availability of production and timing of materials recruitment .
PAYMENT:
a) Niteko will issue invoices to the Buyer at the price of the products, at the established delivery time of the products in accordance with the
INCOTERMS applicable . Payment will be due at the time goods are ready , unless otherwise agreed in writing between the Buyer and Niteko
. All payments will be made on the bank account ( IBAN ) indicated by Niteko . If deliveries are divided, invoices will be issued separately and
payments will be made at the due date
b ) Niteko reserves the right to submit to Niteko Credits office, for approval, the request of product deliveries. If , at any time , Buyer's financial
condition does not justify the production or delivery of products, within the applicable payment terms , Niteko may ask for the full or partial
advance payment or the application of other payment terms ,or may suspend , withdraw or cancel any commitments, delivery or any other
service offered by Niteko .
c) In the event of non-fulfilment by the Buyer of the payment of any amount due or any other fees and in the case of any non-fulfilments ,
Niteko has the right to refuse to provide other services and / or delivery of any Products until payments have been made and may suspend ,
delay or cancel any commitments, delivery or other service.
DELIVERY AND QUANTITIES:
The products will be delivered EX-WORKS (INCOTERMS latest version), unless otherwise agreed in writing. Delivery dates communicated or
accepted by Niteko are purely approximate and Niteko will not respond, nor will be responsible for the non-fulfilment of its obligations towards
the Buyer, for deliveries that will take place on dates prior or subsequent to the communicated date, if reasonable. Niteko agrees to comply with
the delivery date communicated or accepted, provided that the Buyer submit all the information about ordering, delivery and reasonable notice.
The acceptance by signature and stamp of the order confirmation document must be received by Niteko no later than 5 days from the date of its
delivery, failing which it shall be considered automatically accepted.
The photometric data, efficiency and lighting information may be subject to changes and improvements. Leds temperatures color are subject to
tolerance.
Niteko does not accept claims after 8 days of receipt of the goods .
LIABILITY LIMITATIONS:
Niteko will not be liable for any loss of profit, loss of savings, loss of reputation, loss of starting up, any direct or indirect damages, consequential
or special damages arising or in connection with the contract or the sale of products or services by Niteko, or from their use, contractual or
extracontractual , or arising from any other source, even though it is Niteko advised or is aware of the possibility of such damages.
Pag. 62
www.niteko.com
Eleva - 06/2014 - V. 2
CONTROLS ON EXPORTS AND IMPORTS:
The purchaser is aware that some transactions of Niteko are subject to imports and exports regulations, including European, U.S. and international regulations ("Export Regulations") which prohibit the export, directly or indirectly, of some products or technologies to certain countries. Any
and all obligations of Niteko relating to export, re-export and transfer of products as well as the activities of technical assistance, training, investment, brokerage and financial assistance must compliance with the Export Regulations that from time to time, will govern the license and
delivery of technology and products abroad through competent people in various jurisdictions for the implementation of Export Regulations. If the
delivery of products, services and / or documentation is subject to license request by public authorities or otherwise subject to restriction or
prohibition, Niteko may legitimately suspend its obligations and rights towards the Purchaser or end user until the license is obtained or due to
the absence of restrictions / prohibitions.
Niteko may also terminate the order without liability to the purchaser or end user.
The buyer guarantees that it will respect all export rules, re-export and transfer which result from the Export Regulation or are shown on the export
license (if applicable) for each product supplied to the buyer. The buyer will be responsible to enforce all restrictions on third-party to whose are
transferred or re-exported products, services and / or documentation. The buyer will reasonably attend any action necessary to ensure that there
are no buyers or end users who violate Export Regulations. The buyer shall indemnify Niteko for direct and indirect damages, losses and costs
(including attorneys' fees) or other liability arising from the violation of this Clause, by Buyer or its customers .
USE OF TRADEMARK:
The pictures, designs and images contained on the website, product catalog and price list are for illustrative purposes and demonstration of the
products and their applications and installations. The use of the trademark, logos, product names and any image of the products, accessories and
installations by third parties for advertising or promotional purposes must be authorized by Niteko.
FORCE MAJEURE:
Niteko shall not be responsible for any failures or delays in performing any obligation due to the interruption of the production process of the
products, caused by Force Majeure . The Force Majeure means and includes all those circumstances and events that are outside the control of
Niteko , foreseeable or unforeseeable . Following of which Niteko can not be responsible to perform its obligations , including force majeure and /
or the fault of Niteko suppliers.
WARRANTY:
Please refer to the Warranty Certificate posted on the following link: www.niteko.com
APPLICABLE LAW AND JURISDICTION:
All offers, confirmations and Agreements are governed in accordance with Italian laws . All disputes , without exception will be subject to the
exclusive jurisdiction of the courts of Taranto , Italy . The International Convention governing the international sale of goods shall not apply to any
offer , confirmation or Agreement.
The company reserves the right to modify the products characteristics and their prices whenever it is considered worthwhile, without any obligation notice, finalized to the improvement of the products.
The photometric data, efficiency and lighting information may be subject to changes and improvements. The Leds Correlated Color Temperature
(CCT) is subject to tolerance, according to current legislation.
Pursuant to and by effect of art . 1336 and art. 1341 of the Italian Civil Code , the Buyer expressly declares to know and accept everything that is
listed in the terms above described.
Eleva - 06/2014 - V. 2
www.niteko.com
Pag. 63
WARRANTY
1 - NITEKO S.R.L. ("Niteko") guarantees that the "NITEKO" branded products ("Products") are free from defects in workmanship and / or on
materials, in case of use as intended, for a period of five years from the date of invoice with effect from 01/01/2012.
2 - This warranty ("Warranty") is issued by Niteko in favor of your company ("Customer") on standard products present in our own brochure.
3 - Guarantee will be activated only if the customer makes the on-line registration of site-specific installation of the product and of the details
related to the invoice and order throughout the site [www.niteko.com], within the period of 60 days from the date invoice.
In case of no activation remains effective the warranty given in Niteko Brochure.
4 - Guarantee works only if:
a - Products are used in accordance with the relevant specifications regarding the product use and application (technical specifications);
b - installation and / or Product mounting are carried out in accordance with the instructions enclosed to the product and made by qualified
professional;
c - limit values of temperatures and voltages are not exceeded and the product is not exposed to mechanical stress that doesn’t comply with
its intended use;
d - Product maintenance is carried out according to the instructions enclosed to the product and is carried out by specialized technical
professional and any modifications or repairs to the Products is carried out without written permission or not complying with instructions;
e - Customer has previously performed all the emergency procedures specified in the instruction manual attached to the Product;
f - the faulty product is stored by the customer in the state in which it is (including light sources, electronic equipments, and all electronic or
mechanical parts) for as long as necessary to allow Niteko to carry out the necessary checks on defects / faults complained;
g - for power components and for the Products with LEDs, the warranty covers the 5 years up to a maximum use of 22.000/hours (corresponding to 12 hours of daily operation); within these limits the guarantee is valid for defects exceeding nominal failure rate of 0.5% / 1000 hours
of use, unless it is stated otherwise in the technical specifications for the product, its components and its use. The colour shift of LED modules
is not included in manufacturer's guarantee. In a new LED module, light flux and performance are subject to a tolerance of +/- 10%. All
relevant technical data are defined in the product and application specifications (data sheet, product leaflet, etc.). Due to technical progress
and to the change in the luminous flux and light colour of products that is caused by their use, subsequent deliveries of LED modules may
have light properties deviating from those of the original products.
h -The Customer Present to Niteko the purchase contract or the corresponding invoice or documentation issued as a result of on-line
registration;
i - the fault, duly specified and tested in its nature or amount, is terminated in writing by the Customer to Niteko under penalty of cancellation no later than sixty (60) days of discovery;
j - the Customer has duly paid the Product in accordance with the payment terms agreed in the Sale Contract;
k - Products supplied have been installed in Europe.
5 - Guarantee doesn’t work when
a - Product faults due to unforeseen and unforeseeable events, accident and / or majeure force (including electric shock, lightning), which
can’t be ascribed to a defective manufacturing process of the product;
b - defects resulting from amplitude impulse noise or duration of more than:
- 1000 V between conductor and conductor (L and N);
- 2000 V between conductor and earth (PE and L, N and PE);
- according to IEC 61000-4-5:2005-11.
6 - If the Product should reveal defects covered by this Warranty Statement, and according to conditions mentioned in paragraphs 4 and 5
above, Niteko will be free to proceed, at its option, to repair and / or replace the Product with a product equal or equivalent, in line with technological progress achieved compared to original Product.
7 - Warranty doesn’t cover::
a - all expenses coming from reparation (eg those for the assembly and disassembly, transport of the defective Product and of the repaired
and new one, product disposal, daily allowances and travel expenses, lifting equipment, scaffolding); All these costs above mentioned shall
be paid by the customer;
b - parts subject to wear, such as batteries and mechanical parts subject to wear as well as software defects, bugs or viruses.
c - Products commercialized by Niteko but produced by other Companies (look at company brand).
For these systems the 5-year warranty will be granted after Niteko evaluation of the lighting project and its installation
8 - Outdoor products are made from Niteko through innovative manufacturing processes that ensure an high quality level in terms of resistance
to corrosion, abrasion, flaking and color stability. These products are covered by this warranty provided that possible defects compromise their
structural/mechanical safety and those are related to defects on product manufacturing process.
9 - This warranty does not apply to Light Management Systems.
10 - When properly activated, this Warranty is the sole and exclusive warranty provided by Niteko to the Customer on Product and expressly
derogates from any other right, whether express and/or implied, acknowledged by the law to the Customer, who renounces said right in the
broadest manner allowed by the law as well as any other warranties given by Niteko.
11 - The Customer shall claim no further rights from Niteko according to the defective product. In particular, the Customer may not claim from
Niteko any expenses due to defective/faulty product storage or any other costs and/or compensation. Moreover the Customer shall not request
and/or claim any payment extensions, price reductions or the termination of the supply contract.
Pag. 64
www.niteko.com
Eleva - 06/2014 - V. 2
EL
UE
A CATALOG
EV
06
20 1 4
Zona P.I.P. - Viale delle Imprese, 3 - 74020 Montemesola (TA) - ITALY
Tel. [+39] 099.567.12.19 - Fax [+39] 099.567.11.12
IT 02867530731

LED Products for street, industrial and large areas lighting

Transcription

Similar documents

C:\Users\Moser\Desktop\Moser Engineering\Projects\2013\13

Iluminate Your Style

ABnote DuoChrome is an exclusive, state-of-the

Apartments Cajner AP3 (2+2)

JOEL FITZPATRICK STUDIO

10 Case study, Crowne Plaza hotel

BevMo! - Bill Brown Sales

Alfredo De Vido Architects Kate`s Paperie

Read more. - Got Light

DER KOMMISSAR hospitality design