Specification Grade Area lights available in IES Type II distributions.
For use in parking lots, roadways, pathways and general area lighting.
Mounts to 4" square steel poles at 15-25'. Designed to replace 250W
Metal Halide Area Lights. Patent Pending thermal management
system. 5 Year Warranty.
Weight: 32.0 lbs
Suitable for wet locations as a downlight.
Die cast aluminum housing, lens frame and mounting
100,000-hour LED lifespan based on IES LM-80 results
and TM-21 calculations.
The Type II distribution is ideal for wide walkways, on
ramps and entrance roadways, bike paths and other
long and narrow lighting applications. This type is meant
for lighting larger areas and usually is located near the
roadside. This type of lighting is commonly found on
smaller side streets or jogging paths.
3-step MacAdam Ellipse binning to achieve consistent
LED color temperature is warrantied to shift no more
than 200K in CCT over a 5 year period.
Effective Projected Area:
EPA = 0.75
RAB's range of CCT (Correlated color temperature)
follows the guidelines of the American National
Standard for Specifications for the Chromaticity of Solid
State Lighting (SSL) Products, ANSI C78.377-2008.
Six (6) multi-chip, 13W, high-output, long-life LEDs.
Specular vacuum-metallized polycarbonate
Constant Current, Class 2, 2000mA, 100-277V,
50-60Hz, 1.1A, Power Factor 99%
High temperature silicone gaskets.
5.0% at 120V, 12.3% at 277V
Suitable for use in 40°C ambient temperatures.
Cold Weather Starting:
The minimum starting temperature is -40°F/-40°C.
Our environmentally friendly polyester powder coatings
are formulated for high-durability and long-lasting color,
and contains no VOC or toxic heavy metals.
ALED78 is available with a 6kV surge protector (SP6).
SP6 available .
Mercury and UV free.
Superior heat sinking with external Air-Flow fins.
Tech Help Line: 888 RAB-1000
Copyright ©2014 RAB Lighting Inc. All Rights Reserved
Email: [email protected]
On the web at: www.rabweb.com
Note: Specifications are subject to change without notice
Page 1 of 2