K range

Transcription

K range

APEM
K range
Power rocker switches and indicators
•
•
•
•
Wide range
Laser etched symbols
Illuminated or non-illuminated
Optionally sealed to IP68
Unique
rocker design
K range
The K range at a glance
A range of mix and match products
KR rocker switches
KL locking rocker switches
Attractive rugged rocker switches
with more that 3.000.000
possible combinations.
Custom laser etching.
Available with 2 or 3 positions,
with one locked position.
Patented intuitive ergonomics.
Page 12
Page 3
KI indicators
KG rocker switches
A complete indicator series with
a wide choice of colours and a
large number of LEDs.
Long life expectancy.
With a raised protection bezel
preventing inadvertent actuation
of the rocker.
Page 26
Page 21
Accessories - Page 34
Hole plug
Connector
For future extensions.
For separate wiring.
Mounting panel units
Removing tool
To limit the number of cut-outs.
APEM will be happy to develop custom product solutions. Please contact us with your requirements.
2
www.apem.com
APEM
KR series
Power rocker switches
Distinctive features
Attractive rugged rocker switch
Removable actuator
Up-to-date rocker design
Easy to stock
Easy to customize
Smooth curves
Wide choice of colours and symbols
Laser etched symbols on illuminated versions
High performance LEDs
Long life expectancy
An array of colours and voltages
Optional panel seal
High performance ultrasonic
welding
Protection against dust and the
effects of continuous immersion
under pressure.
Integrated resistors
Easy electrical connection
Robust roller contact
Very long life expectancy
Many electrical functions available
Large variety of terminal options
Up to 10 terminals
Screw, solder lug and quick-connect
APEM will be happy to develop custom product solutions. Please contact us with your requirements.
APEM
www.apem.com
3
KR series
Specifications
❑ Unique rocker design
❑ Wide choice of colours
❑ Laser etched symbols
❑ Illuminated or non-illuminated
❑ Optionally sealed to IP68
ELECTRICAL SPECIFICATIONS
MATERIALS
• Currrent/voltage rating with resistive load :
- Silver contacts (A) : 5A 24VDC, 100.000 cycles
10A 24VDC, 10.000 cycles (terminals 6.35 x 0.8 only)
- Gold plated contacts (D) : 20mA 12V, 150.000 cycles
• Initial contact resistance : 10 m1 max.
• Insulation resistance : 1.000 M1 min. at 500VDC
• Dielectric strength : 2.000 Vrms 50 Hz min. between terminals
• Mechanical life :150.000 cycles min.
• Case : PA 6-6
• Actuator : ABS
• Bezel : PA 6-6
• Terminals : brass, silver plated
• Contacts : silver (A)
or silver, gold plated (D)
• Contact roller : brass, nickel plated
SEALING
ENVIRONMENTAL SPECIFICATIONS
• Degree of protection of sealed versions : frontal sealing to IP68
according to IEC 60529 (submersion under 1 meter of water for more than
30 minutes)
• Salt spray resistance : 96 hours according to IEC 512-6, test 11f
• Vibration resistance : 10-500 Hz / 10 g per IEC 60068-2-6
• Operating temperature : -40°C to +85°C
Sealing is optional.
To order a sealed product,
complete the appropriate box of
ordering format on the following
pages.
DIMENSIONS
➞ Flat seal
46.50
(1.830)
12.00
(.472)
50.00 Max
(1.969 Max)
35.50
(1.398)
24.00
(.944)
Dimensions : First dimensions are in mm while
inches are shown as bracketed numbers.
11.00
(.433)
U2282
25.00
(.984)
Tolerance : The general tolerance for
dimensions in this brochure is ± 0,3 (.012).
Overall dimension tolerance is ± 0,5 (.020).
47.00
(1.850)
Packaging unit : 40 pieces
Dimensions, specifications and data shown in this brochure are subject to change without notice.
4
www.apem.com
APEM
KR series
Selection guide
HOW TO ORDER
• To order a complete product, fill in all the boxes of the following order guide.
• To order case only (without actuator), finish your order number with the LED wiring code.
• To order actuator only (without case), begin the order number with code KRR, then follow the order format from
”actuator type” until the end of the options.
CASE
+ LEDS
KR
Side A
Electrical functions
SERIES
Poles
3 Single pole
4 Double pole
1
4
4-1R
5
6
7
8
9
ON
ON
ON
MOM
ON
MOM
ON
ON
Contacts
OFF
ON
ON
ON MOM
ON
ON
OFF MOM
OFF MOM
OFF
ON
A
D
Sealing
Silver
Gold plated
Terminals
Terminals (continued)
Screw
0 6 terminals with barrier
Solder lug/quick-connect
4 6 terminals w/o barrier
A 10 term. with barrier
B 10 term. w/o barrier
C 10 terminals for use
with connector U2292
Quick-connect 6,35x0,8
D 10 term. with barrier
E 10 term. w/o barrier
F 10 term. for use with
connector U2292
G 10 term. with barrier
H 10 term. w/o barrier
J 10 terminals for use
ACTUATOR
Colour
1 For non-illuminated
application
2 For illuminated
application
1
1/4
2
3
4
5
6
7
9
A
Blue
Dark blue
Black
Green
Grey
Yellow
Red
Ivory
Orange
Aluminium
bright
Orientation
4
N
APEM
None
LED 6V red
LED 6V green
LED 6V yellow
LED 6V blue
LED 6V white
LED 12V red
LED 12V green
LED 12V yellow
LED 12V blue
LED 12V white
LED 24V red
LED 24V green
LED 24V yellow
LED 24V blue
LED 24V white
See diagrams
page 9.
Area M
Area B
Symbols
ON
5
1
4
A
1
2
5
M
2
OFF
6
3
B
6
1
O
2
OFF
6
5
3
2
1
6
E
6
OFF
S
3
3
ON
4
5
ON
5
OFF
3
NOTICE
X
A
B
C
M
R
D
E
F
N
S
J
K
L
P
T
Wiring
ACTUATOR MARKING
Area A
Type
LEDS
No
Yes
X
K
Side B
Symbols : see page 31.
Accessories : see page 34.
4
4
ON
2
1
: please note that not all combinations of above numbers are available. Refer to the following pages for further information.
www.apem.com
5
KR series
Case
• To order case only (without rocker), finish your order number with the LED wiring code.
CASE
+ LEDS
MODEL
STRUCTURE
2-3
5-6
Single pole
KR31
Double pole
KR41
KR44*
KR44-1R*
KR45
KR46
KR47
KR48
KR49
KR35
KR36
KR37
KR38
KR39
1-2
4-5
ON
ON
ON
MOM
ON
MOM
ON
ON
Bottom view
Contact
area
OFF
ON ON
ON MOM
ON
ON
OFF MOM
OFF MOM
OFF ON
Contact &
LED area
10
3
2
1
8
3
2
1
9
6
5
4
7
6
5
4
LED
area
* Function 4 : single pole in double pole case
10 terminal version
6 terminal version
ELECTRICAL FUNCTIONS AND CONNECTIONS
In the tables below, terminal connections as viewed from bottom of switch.
Only the contact area is represented.
For single pole models, only terminals 1, 2 and 3 are to be considered (not terminals 6, 5, 4).
Positions
3
Function 1 *
KR31-KR41
Function 5
KR35-KR45
Function 6
KR36-KR46
Function 7
KR37-KR47
2
1
3
2
x = w/o terminal
o = with terminal
▲ = momentary
Positions
1
3
2
1
3
2
1
3
2
1
6
5
4
6
5
4
3
2
1
3
2
1
6
5
4
6
5
4
3
2
1
3
2
1
6
5
4
6
5
4
3
2
1
3
2
1
3
2
1
6
5
4
6
5
4
6
5
4
3
Function 8
KR38-KR48
Function 9
KR39-KR49
Function 4
KR44
Function 4-1R
KR44-1R
2
1
3
2
1
3
2
1
3
2
1
3
2
1
3
2
1
6
5
4
6
5
4
6
5
4
3
2
1
3
2
1
3
2
1
6
5
4
6
5
4
6
5
4
3
2
1
3
2
1
3
2
1
6
5
4
6
5
4
6
5
4
3
2
1
3
2
1
3
2
1
6
5
4
6
5
4
6
5
4
* Function 1 only available for 6 terminal versions.
6
www.apem.com
APEM
KR series
Case
TERMINALS
CASE
+ LEDS
Solder lug / quick-connect
Screw
Ø3.00x0.50 SI
(.118DIAx0.50 IS)
6.35x0.80
(.25x.031)
6.35x0.80
(.250x.031)
2.80x0.80
(.110x.031)
3
5
6 terminals with barrier
6 terminals w/o barrier
D
E
F
10 terminals for use with
connector U2292
G 10 terminals with barrier
H 10 terminals w/o barrier
J 10 terminals for use with
connector U2282
6
Terminals are marked
on the case.
The drawings show the
maximum possible number
of terminals.
5.85
(.230)
7.10
(.280)
11.30
(.445)
11.30
(.445)
9.10
(.358)
1
6.85
(.269)
5
connector U2292
2
2
4
A
B
C
6 term. with barrier
Normalized quick-connect 2,8x0,8
Ø1.20
(.047DIA)
3
0.80
(.031)
4
0
ø1.50
(.059DIA)
Ø3.10
(.122DIA)
4.50
(.177)
6.35
(.25)
6 terminal version
10 terminal version
CONTACT MATERIALS
CASE
A
D
APEM
+ LEDS
Silver
Silver, gold plated
www.apem.com
7
KR series
Case - LEDs
SEALING
CASE
+ LEDS
Optional seal
(K version)
X
No sealing
K
IP68 (switch assembled on panel)
Ultrasonic welding of frame to case is standard on
all versions.
The ultrasonic welding and the optional panel seal
prevent water and dust from introducing into the
switch housing.
Optional seal
(K version)
The product shall be installed professionally.
Test conditions available on request.
LEDS
CASE
+ LEDS
Side A
Side B
Complete each enlarged box with one of the codes listed below.
X
Without LED
Side A
Red
Green
Yellow
Blue
White
6VDC
A
B
C
M
R
7
8
7
8
7
8
7
8
12VDC
D
E
F
N
S
4
1
4
1
4
1
4
1
24VDC
J
K
L
P
T
5
2
5
2
5
2
5
2
6
3
6
3
6
3
6
3
9
10
9
10
9
10
9
10
LED consumption : 20mA @ nominal voltage (25°C)
Other illumination solutions : on request.
Side B
8
www.apem.com
APEM
KR series
Case - LEDs
The LED wiring diagram is shown on the case.
WIRING
+ LEDS
CASE
• For 6 terminal versions
1
4
1
+
2
5
2
3
6
3
4
LED connected to the load
1
-
5
+
6
4
2
5
3
6
1
+
4
5
2
-
+
1
-
-
6
3
A (standard)
4
2
5
3
6
1
4
+ -
Note : If not available,
terminals are added to
connect the LED.
5
2
+
6
3
-
D - for function 1 (on-off)
with LED on side A
4
2
5
3
6
8
7
4
-
1
4
5
3
6
1
4
-
+
4
2
5
3
6
-
1
4
2
+ -
3
-
5
2
5
6
3
6
1
4
2
+ -
3
+
5
6
F
Independent LED or integrated functions
8
7
1
4
+
8
7
1
4
2
5
2
5
2
5
3
6
3
6
3
6
10
9
+ 10
- +
E
1
2
6
3
1
C
1
4
+
5
2
B
1
+
- +
9
-
+ 10
9
To have independent LEDs.
-
G (standard)
R1
R2
+
8
7
1
4
-
+
R1
8
7
8
7
1
4
1
4
2
5
2
5
2
5
3
6
3
6
3
6
10
9
10
R2
9
-
R2
10
-
To obtain 2 symbol illumination levels (night illumination when OFF
and higher illumination when ON).
+
Dotted line = external wiring, continuous line = internal wiring
9
R1
H
Available in Single Pole only, with H and J quick-connect terminals.
8
7
1
4
2
5
3
6
10
9
To have a polarity inversion (typical application : fan motor).
Dotted line = internal wiring, continuous line = internal wiring
I
Power supply betweeen 2 and 5 - Load between 1 and 4 or 3 and 6.
Available with H and J quick-connect terminals.
APEM
Please contact us for other wiring solutions.
www.apem.com
9
KR series
Actuator - Marking
To order actuator only (without case), begin the order number with code KRR, then follow the order format
from ”actuator type” until the end of the options.
ACTUATOR TYPE
ACTUATOR
1
2
For non-illuminated application
For illuminated application
Other rocker design : on request.
ACTUATOR COLOUR
ACTUATOR
Code
Colour
Code
Colour
Code
Colour
Blue
4
Grey
9
Orange
Dark blue
5
Yellow
2
Black
6
Red
A
Aluminium
bright
3
Green
7
Ivory
1
1/4
Note : colour 7 not available on illuminated
versions.
A soft-touch varnish can be added. Consult us.
If no marking required, leave box blank.
MARKING ORIENTATION
ACTUATOR MARKING
4
ON
5
1
1
2
ON
3
4
2
3
3
N
6
5
4
OFF
OFF
2
OFF
6
6
6
5
O
1
5
ON
S
4
OFF
3
ON
2
1
E
Other orientations : on request
10
www.apem.com
APEM
KR series
Marking - Mounting
SYMBOLS
ACTUATOR MARKING
A
M
B
Available symbols : see page 31.
Marking colour
White marking for illuminated rockers (laser etching) and non-illuminated black
rockers (pad printing). Black marking for non-illuminated colour rockers (pad
printing). Other : on request.
4
5
Laser etching resistance
- Water and petrol resistant acccording to EN61058-1
- Tear resistant (cross-cut test) according to NF ISO 2409 : class 0
- UV resistant according to ISO 4892-2
A
M
1
2
B
6
3
14.00
(.551)
R:20.00
(.787 R)
R:6.00
(.236 R)
7.70
(.303)
20.30
(.799)
87
.0
0°
20.20
(.795)
6.40
(.252)
Marking area
For illuminated versions. The symbol will be included in the hatched area.
Marking in M are : on request.
SWITCH PANEL CUT-OUT
Panel thickness : 0,8 mm to 4,6 mm
MATRIX MOUNTING
25.00 mini
(.984 min.)
4.00
(.157)
Recommended panel thickness :
between 2 mm and 3,5 mm
47.00 mini
(1.850 min.)
10.20
(.402)
36.80 0/+0.3
(1.449 0/+.012)
21.08 0/+0.3
(.830 0/+.012)
APEM
www.apem.com
11
KL series
Locking rocker switches
Distinctive features
Protection frames
Unlocking actuator
Unlocking actuator
Each KL rocker switch includes an unlocking actuator.
This actuator must be pressed to activate the protected function of the rocker.
Moreover, two frames protect the unlocking actuator from untimely activation.
This intuitive and secured ergonomics is patented by APEM.
2 position versions (electrical functions 1, 5 and 6)
Press unlocking actuator
to reach the protected position
Press opposite part of actuator
to leave the protected position
➪
3
2
1
➪
3
2
1
3
2
1
3 position versions (electrical functions 7, 8, 9 4, 4-1R)
Press unlocking actuator
to reach the protected position
Press opposite part of actuator
to leave the protected position
➪
3
12
2
1
➪
3
2
1
➪
3
2
www.apem.com
1
3
2
1
APEM
KL series
Specifications
❑ One protected position
❑ Patented intuitive ergonomics
❑ Wide choice of colours
MATERIALS
• Currrent/voltage rating with resistive load :
- Silver contacts (A) : 5A 24VDC, 100.000 cycles
10A 24VDC, 10.000 cycles (terminals 6.35 x 0.8 only)
- Gold plated contacts (D) : 20mA 12V, 150.000 cycles
• Initial contact resistance : 10 m1 max.
• Mechanical life : 150.000 cycles min.
• Case : PA 6-6
• Actuator and unlocking
actuator : ABS
• Bezel : PA 6-6
• Contacts : silver (A)
or silver, gold plated (D)
SEALING
30 minutes)
pages.
DIMENSIONS
➞ Flat seal
24.00
(.944)
46.50
(1.830)
12.00
(.472)
50.00 Max
(1.969 Max)
35.50
(1.398)
26.40
(1.039)
17.00
(.669)
11.00
(.433)
25.00
(.984)
U2282
47.00
(1.850)
CKL49DT1-A
APEM
www.apem.com
13
KL series
Selection guide
• To order a complete product, fill in all the boxes of the following order guide.
CASE
+ LEDS
KL
Side B
Electrical functions
SERIES
Poles
3 Single pole
4 Double pole
1
4
4-1R
5
6
7
8
9
ON
ON
ON
MOM
ON
MOM
ON
ON
Contacts
OFF
ON
ON
ON MOM
ON
ON
OFF MOM
OFF MOM
OFF
ON
A
D
Sealing
Silver
Gold plated
X
K
LEDS
Terminals
Terminals (continued)
Screw
Solder lug/quick-connect
A 10 term. with barrier
B 10 term. w/o barrier
C 10 terminals for use
D 10 term. with barrier
E 10 term. w/o barrier
F 10 term. for use with
connector U2292
G 10 term. with barrier
H 10 term. w/o barrier
J 10 terminals for use
ACTUATOR
X
A
B
C
M
R
D
E
F
N
S
J
K
L
P
T
No
Yes
1 For non-illum.
application
2 For illuminated
application
NOTICE
14
Rocker
colour
Unlocking
actuator colour
Orientation
4
1
1/4
2
3
4
5
6
7
9
Blue
Dark blue
Black
Green
Grey
Yellow
Red
Ivory
Orange
None
LED 6V red
LED 6V green
LED 6V yellow
LED 6V blue
LED 6V white
LED 12V red
LED 12V green
LED 12V yellow
LED 12V blue
LED 12V white
LED 24V red
LED 24V green
LED 24V yellow
LED 24V blue
LED 24V white
See diagrams
page 18.
ACTUATOR MARKING
Area A
Type
Wiring
1
1/4
2
3
4
5
6
7
9
Blue
Dark blue
Black
Green
Grey
Yellow
Red
Ivory
Orange
N
Symbols
Marking colour
A
1
Illuminated models
Blank White
B
ON
1
4
2
5
2
OFF
3
6
3
5
6
Area B
Non-illuminated
1
Blue
2
Black
3
Green
4
Grey
5
Yellow
6
Red
7
White
9
Orange
www.apem.com
APEM
KL series
Case
CASE
+ LEDS
MODEL
STRUCTURE
2-3
5-6
Single pole
KL31
KL35
KL36
KL37
KL38
KL39
Double pole
KL41
KL44*
KL44-1R*
KL45
KL46
KL47
KL48
KL49
1-2
4-5
ON
ON
ON
MOM
ON
MOM
ON
ON
Bottom view
Contact
area
OFF
ON ON
ON MOM
ON
ON
OFF MOM
OFF MOM
OFF ON
Contact &
LED area
10
3
2
1
8
3
2
1
9
6
5
4
7
6
5
4
LED
area
10 terminal version
6 terminal version
ELECTRICAL FUNCTIONS AND CONNECTIONS
In the tables below, terminal connections as viewed from bottom of switch. Only the contact area is
represented. For single pole models, only terminals 1, 2 and 3 are to be considered (not 6, 5, 4).
2 positions
x = w/o terminal
o = with terminal
▲ = momentary
3 positions
Press unlocking
actuator to unlock.
3
2
1
CKLFUN1-A
3
2
1
3
Function 1 *
KL31-KL41
Function 7
KL37-KL47
Functionn 5
KL35 - KL45
Function 8
KL38-KL48
Function 6
KL36-KL46
Function 9
KL39-KL49
* Function 1
- Only available for 6 terminal versions.
- Illuminated versions only available with “A” wiring.
2
1
3
2
1 CKLFUN2-A
3
2
1
Function 4
KL44
Function 4-1R
KL44-1R
APEM
www.apem.com
15
KL series
Case
TERMINALS
CASE
Screw
+ LEDS
Ø3.00x0.50 SI
(.118DIAx0.50 IS)
3
5
D
E
F
connector U2292
2.80x0.80
(.110x.031)
G 10 terminals with barrier
H 10 terminals w/o barrier
J 10 terminals for use with
connector U2282
6
connector U2292
5
2
4
A
B
C
6 term. with barrier
Ø1.20
(.047DIA)
6.35x0.80
(.250x.031)
6.35x0.80
(.25x.031)
4
0
0.80
(.031)
ø1.50
(.059DIA)
Ø3.10
(.122DIA)
4.50
(.177)
6.35
(.25)
3
6 terminal version
The drawings show the
maximum possible number
of terminals.
7.10
(.280)
9.10
(.358)
5.85
(.230)
11.30
(.445)
11.30
(.445)
6.85
(.269)
2
1
on the case.
10 terminal version
CKLCO-A
CONTACT MATERIALS
CASE
A
D
16
+ LEDS
Silver
Silver, gold plated
www.apem.com
APEM
KL series
Case - LEDs
SEALING
CASE
+ LEDS
Optional seal
(K version)
X
No sealing
K
all versions.
switch housing.
Optional seal
(K version)
LEDS
CASE
+ LEDS
Side B
Complete enlarged box with one of the codes listed below.
X
Without LED
Red
Green
Yellow
Blue
White
6VDC
A
B
C
M
R
12VDC
D
E
F
N
S
24VDC
J
K
L
P
T
7
8
7
8
4
1
4
1
5
2
5
2
6
3
6
3
9
10
9
10
APEM
Side B
www.apem.com
17
KL series
Case - LED
The LED wiring diagram is shown on the case.
WIRING
CASE
+ LED
1
1
4
2
5
3
6
+
4
2
5
3
6
LED connected to the load
+
-
A (standard)
-
1
4
+
1
2
5
2
5
3
6
3
6
B
C
1
4
-
4
2
5
3
6
E
-
1
-
+
4
2
5
3
6
+
F
Note : If not available, terminals are added to connect the LED.
+
8
7
1
4
2
5
3
6
10
9
Independent LED or integrated functions
To have independent LED.
-
G (standard)
R1
+
8
7
1
4
2
5
3
6
R2
10
9
To obtain 2 symbol illumination levels (night illumination when OFF and higher illumination when ON).
Dotted line = external wiring, continuous line = internal wiring
-
H
Available in Single Pole only, with H and J quick-connect terminals.
8
7
1
4
2
5
To have a polarity inversion (typical application : fan motor).
3
6
Dotted line = internal wiring, continuous line = internal wiring
10
9
I
Power supply betweeen 2 and 5 - Load between 1 and 4 or 3 and 6.
Available with H and J quick-connect terminals.
Please contact us for other wiring solutions.
18
www.apem.com
APEM
KL series
Actuator - Marking
ACTUATOR TYPE
ACTUATOR
1
2
For non-illuminated application
For illuminated application
ROCKER COLOUR
ACTUATOR
Code
1
1/4
2
Colour
Code
Colour
Code
Blue
3
Green
6
Red
Dark blue
4
Grey
7
Ivory
Black
5
Yellow
9
Orange
Note : colour 7 not available on illuminated versions
Colour
UNLOCKING ACTUATOR COLOUR
ACTUATOR
Code
1
1/4
2
Colour
Code
Colour
Code
Blue
3
Green
6
Colour
Red
Dark blue
4
Grey
7
Ivory
Black
5
Yellow
9
Orange
If no marking required, leave box blank.
MARKING ORIENTATION
ACTUATOR MARKING
4
ON
5
6
N
APEM
1
2
OFF
3
Other orientations : on request
www.apem.com
19
KL series
Marking - Mounting
SYMBOLS
ACTUATOR MARKING
A
B
4
A
5
1
2
Marking area - The symbol will be included in the hatched area.
B
3
3.90
(.154)
5.30
(.209)
13.20
(.520)
6.40
(.252)
13.70
(.539)
13.70
(.539)
5.30
(.209)
3.90
(.154)
6
13.20
(.520)
14.00
(.551)
For illuminated versions
14.00
(.551)
For non-illuminated versions
MARKING COLOUR
ACTUATOR MARKING
Illuminated models (laser etching)
Blank
White
Non-illuminated models (pad printing)
1 : Blue - 2 : Black - 3 : Green - 4 : Grey - 5 : Yellow - 6 : Red - 7 : White - 9 : Orange
MATRIX MOUNTING
25.00 mini
(.984 min.)
4.00
(.157)
47.00 mini
(1.850 min.)
10.20
(.402)
20
ON
ON
36.80 0/+0.3
(1.449 0/+.012)
21.08 0/+0.3
(.830 0/+.012)
www.apem.com
APEM
KI series
Led indicators
Specifications
❑ Wide choice of bezel colours
❑ Wide choice of LEDs
❑ Long life expectancy
MATERIALS
• Operating voltage : 6VDC, 12VDC or 24VDC
• Nominal current : 20mA per LED
• Case : ABS
• Bezel : ABS
30 minutes)
SEALING
pages.
DIMENSIONS
12.00
(.472)
50.00 Max
(1.969 Max)
35.50
(1.398)
6.30
(.248)
➞ Flat seal
11.00
(.433)
U2282
25.00
(.984)
46.80
(1.843)
APEM
www.apem.com
21
KI series
LED indicators
Selection guide
Side
A
KI
SERIES
Colours
1
1/4
2
3
4
5
6
9
Blue
Dark blue
Black
Green
Grey
Yellow
Red
Orange
Side
M
Side
B
Side
A
LEDS
X
A
B
C
M
R
D
E
F
N
S
J
K
L
P
T
None
LED 6V red
LED 6V green
LED 6V yellow
LED 6V blue
LED 6V white
LED 12V red
LED 12V green
LED 12V yellow
LED 12V blue
LED 12V white
LED 24V red
LED 24V green
LED 24V yellow
LED 24V blue
LED 24V white
Type of
illumination
X
S
Side
B
Symbols
Standard
Super bright
Marking orientation
ON
1
OFF
3
4
N
5
2
6
1
O
2
ON
4
3
S
Side
M
3
OFF
5
4
A
5
M
2
6
B
3
1
Sealing
X No
K Yes
Terminals with
barrier
C Solder lug /
quick-connect
F Quick-connect 6,35
J Quick-connect 2,8
6
OFF
6
ON
4
2
5
1
DC voltage standard
6
E
5
OFF
3
4
ON
2
1
On request : 48VDC voltage - AC voltage - new design
NOTICE
22
www.apem.com
APEM
KI series
Led indicators
Case - LEDs - Marking
BEZEL COLOUR
KI
Code
Colour
Code
Colour
Blue
4
Grey
Dark blue
5
Yellow
2
Black
6
Red
3
Green
9
Orange
1
1/4
LEDS
Side A
Side M
Side B
Without LED
X
Side A
Red
Green
Yellow
Blue
White
6VDC
A
B
C
M
R
12VDC
D
E
F
N
S
24VDC
J
K
L
P
T
Side M
4
1
4
1
4
1
4
1
5
2
5
2
5
2
5
2
6
3
6
3
6
3
6
3
Side B
TYPE OF ILLUMINATION
X
S
Standard
Super bright
MARKING ORIENTATION
If no marking required, leave box blank. Other orientations : on request
1
4
ON
5
6
3
ON
OFF
3
APEM
5
6
O
www.apem.com
OFF
2
1
4
N
6
3
1
2
OFF
2
S
4
6
5
ON
5
OFF
ON
4
3
2
1
E
23
KI series
LED indicators
Marking - Terminals
SYMBOLS
A
M
B
Marking colour
White (laser etching)
Marking area - The symbol will be included in the hatched area.
4
A
1
5
M
2
6
B
3
1
5
2
6
3
8.20
(.323)
4
13.60
(.535)
20.30
(.799)
33.40
(1.315)
10.50
(.413)
TERMINALS (WITH BARRIER)
ø1.50
(.059DIA)
4.50
(.177)
Ø3.10
(.122DIA)
C
Ø1.20
(.047DIA)
6.35x0.80
(.250x.031)
6.35x0.80
(.25x.031)
connector U2292
F
2.80x0.80
(.110x.031)
connector U2292
J
connector U2282
on the case.
9.10
(.358)
7.10
(.280)
24
www.apem.com
APEM
KI series
Led indicators
Sealing - Mounting
SEALING
X
No sealing
K
all versions.
switch housing.
Optional seal
(K version)
MATRIX MOUNTING
4.00
(.157)
25.00 mini
(.984 min.)
47.00 mini
(1.850 min.)
10.20
(.402)
36.80 0/+0.3
(1.449 0/+.012)
21.08 0/+0.3
(.830 0/+.012)
ON
OFF
APEM
www.apem.com
25
KG series
Distinctive features and specifications
❑ Protected rocker
❑ VDE (EN 61058-1) approved
❑ Sealed to IP65
MATERIALS
• Currrent/voltage rating :
- functions 1 (ON-OFF) and 6 (ON-ON) : 15A 12VDC, 10A 24VDC,
15A 250VAC max., 10mA 14VDC min.
- functions 4 ( ON ON ON) and 4-1R (ON ON MOM) :
8A 12VDC, 5A 24VDC, 8A 250VAC max.
- other functions : 10A 12VDC, 8A 24VDC, 10A 250VAC max.
• VDE approved ratings : 12(4)A 250VAC, T85/55°C
• Initial contact resistance : 10 m1 max. at 1A 2VDC
• Electrical life : 10.000 cycles min.
• Mechanical life : 2 position models : 100.000 cycles min.
3 position models : 30.000 cycles min.
• Degree of protection : IP65
• Shock resistance : 100 g according to IEC 512-4, test 6c
• Vibration resistance : 10-500 Hz - 10 g according to IEC 512-4, test 6d
• Operating temperature : 2 position models : -40°C to + 85°C
3 position models : -10°C to + 65°C
• Case : thermoplastic UL94-V0
• Contacts : silver grain
AGENCY APPROVAL
EN 61058-1
Availability : double pole models,
functions ON-OFF and ON-ON.
Marking : to order switches
marked VDE, add “VDE” at the
end of model number.
MATRIX MOUNTING
25.00 mini.
(.984 min.)
4.00
(.157)
49.00 mini.
(1.929 min.)
12.20
(.480)
26
www.apem.com
APEM
KG series
Case
21.08
(.830)
PANEL CUT-OUT
36.80
(1.449)
Panel thickness :
0,8 mm to 4,6 mm
Recommended thickness :
3
2
1
CASE
+ LAMPS
ROCKER
LENS
MARKING
MODEL
STRUCTURE
OFF
ON ON
ON MOM
ON
ON
OFF MOM
OFF MOM
OFF ON
10.50
(.413)
23.50
(.925)
20.00
(.787)
12.00
(.472)
48.50
(1.909)
43.70
(1.720)
ON
ON
ON
MOM
ON
MOM
ON
ON
6.85
(.269)
KG35
KG36
KG37
KG38
KG39
Double pole
KG41
KG44*
KG44-1R*
KG45
KG46
KG47
KG48
KG49
14.65
(.576)
Single pole
KG31
1-2
4-5
24.50
(.964)
2-3
5-6
11.00
(.433)
➞ Flat seal
TERMINALS
Side A
Ø3.00x0.50 SI
(.118DIAx0.50 IS)
Ø3.10
(.122DIA)
ø1.50
(.059DIA)
6.35
(.25)
0.80
(.031)
Screw
4.50
(.177)
Terminals 1 to 6
are marked on the case.
6.35x0.80
(.25x.031)
6.35x0.80
(.250x.031)
Side A : terminals 1 and 4
Side B : terminals 3 and 6
1
4
2
5
3
6
Quick-connect
Side B
CONTACT MATERIALS
A
APEM
Silver grain
Functions ON-OFF and ON-ON : 15A 12VDC , 10A 24VDC, 15A 250VAC max. - 10mA 14 VDC min.
Other functions : 10A 12VDC, 8A 24VDC, 10A 250VAC max.
www.apem.com
27
KG series
Lamps
BEZEL
Black, sealed to IP65
2
LAMPS
Side A
Side B
Side A
X
Without lamp
J
24V LED red
A
6V LED red
K
24V LED green
B
6V LED green
L
24V LED yellow
C
6V LED yellow
M
Neon 125V
D
12V LED red
N
Neon 250V
E
12V LED green
O
Filament 6V
F
12V LED yellow
P
Filament 12V
G
18V LED red
R
Filament 24V
H
18V LED green
S
Fluorescent 220V
I
18V LED yellow
T
Fluorescent 110V
4
1
4
1
4
1
4
1
5
2
5
2
5
2
5
2
6
3
6
3
6
3
6
3
Side B
The lamp wiring diagram is shown on the case.
LAMP WIRING
1
4
+
1
2
5
2
3
6
3
4
1
-
5
6
+
4
2
5
3
6
1
+
4
5
2
-
+
1
-
6
3
A (standard)
-
4
2
5
3
6
- +
1
4
2
+ -
5
Note : If not available,
terminals are added to
connect the LED.
2
+
3
4
6
-
D - for function 1 (on-off)
with LED on side A
1
4
5
3
6
1
4
-
+
4
2
5
3
6
-
C
1
5
1
2
6
3
B
1
+
4
2
5
3
6
E
- +
1
4
2
+ -
3
-
5
2
5
6
3
6
1
4
2
+ -
3
+
5
6
F
To order case only (without rocker), finish your order number with the lamp wiring code.
28
www.apem.com
APEM
KG series
Rocker - Lenses
ROCKER COLOUR
1
Blue
5
Yellow
Dark blue
6
Red
2
Black
7
Ivory
3
Green
9
Orange
4
Grey
1/4
ROCKER SHAPE
Full rocker
Opening on side A
Opening on side B
Opening on sides A and B
Other rocker shapes on customer specifications : on request.
To order rocker only (without case), begin the order number with code KGR, then follow the order format
from ”rocker colour” until the end of the options.
LENS COLOUR
Side A
Side B
X
No lens
1
Blue *
3
Green *
6
Red
9
Orange
B
White
T
Translucent
Side A
4
1
4
1
5
2
5
2
6
3
6
3
Side B
* Blue or green lens recommended with fluorescent lamp.
To order lenses only, begin the order number with the codes :
KGLA for lens A and KGLB for lens B,
then follow the order format from ”lens colour” until the end of the options.
APEM
www.apem.com
29
KG series
Marking
If no marking required, leave all boxes blank.
MARKING
• •
MARKING ORIENTATION
Select one option from each of the
tables below.
4
1
5
2
6
3
1
2
3
4
5
6
MARKING METHOD
C
Hot stamping
V
H
SYMBOLS
Other orientations :
on request
A
B
Marking colour
White marking for black rockers - Black marking for colour rockers
Other : on request.
Marking area
For illuminated versions. The symbol will be included in the hatched area.
4
A
5
6
1
2
B
3
30
4
1
5
2
6
3
12.40
(.488)
11.00
(.433)
11.00
(.433)
www.apem.com
APEM
range
Symbols
Most symbols meet the ISO 7000 standard “graphical symbols for use on equipments” (code given in bracket in the
description). Contact us for symbols not featured in the following tables.
Legend scale :
KR series : 1:1
KL, KG and KI series : depending on space available on the product (see “Symbols” section at the end of each series).
CODE
SYMBOL
DESCRIPTION
CODE
SYMBOL
DESCRIPTION
CODE
SYMBOL
DESCRIPTION
32
Emergency first
aid vehicle
(2565)
Rear
ventilator
33
Load tipping
(1557)
18
Heating
(0637)
34
Loading light
(2457)
-
19
Door
opening
35
Tractor, rear-ward
(0089)
04
-
20
Windshield
demister/defroster
(0635)
36
Combine,
direction of
movement (1678)
05
-
21
Windshield
wiper
(0086)
37
Use no forks
(2406)
06
-
22
Windshield
washer
(0088)
38
Transmission
(1166)
07
Stop
23
Ventilator fan
(0089)
39
Working spot
light
(1145)
08
Motion
24
Side mirror
defroster
40
Engine
(0634)
09
Up motion
25
Restarting
pump
41
Horn
(0244)
10
Down motion
26
Front
fog lights
(0633)
42
Lock
(1656)
11
Hot
27
Rear
fog lights
(0634)
43
Taxi sign light
(2551)
12
Cold
28
Propulsion
system trim
44
Working light
(1024)
13
Hazard warning
(0085)
29
Beacon
(1141)
45
Working light
symmetric
(1024)
14
Traveller
lighting
30
Anchor
46
-
15
Driver
lighting
(1421
31
Electric motor
(0011)
47
-
-
16
01
-
17
02
-
03
XX
APEM
None
Revolving light
www.apem.com
31
K range
Symbols
Legend scale :
KR series : 1:1
CODE
32
SYMBOL
DESCRIPTION
CODE
48
All wheel
drive
49
SYMBOL
DESCRIPTION
CODE
64
Indicator
80
Front windshield
heating
Differential lock
(1662)
65
Brake release
81
Aus
50
-
66
Baggage room
left door
82
Radiator
fan
51
-
67
Baggage room
right door
83
Remove
retarder
52
-
68
Power blinds
84
Restricted
speed
53
-
69
Engine
idle control
85
Preheater
54
Rear window
wiper
(0097)
70
Cruise
res/set
86
ABS detection
55
Rear window
washer
(0099)
71
Driver windows
up/down
87
ECAS detection
56
Lower load
(2223)
72
Middle door
opening
88
Engine stop
57
Cab lock
(1560)
73
Front door
opening
89
Cruise
res/cancel
58
Extraction
74
Lighting in
baggage room
90
ECAS reset
59
Pumping in
75
Cruise on/off
91
Driver windows
heating
60
Rear PTO
(1572)
76
TV
92
Cruise set
61
Front PTO
77
Pump
93
Air bag
up/down
62
Rockshaft down
78
Toilet
94
Read lighting
63
Rockshaft up
79
Toilet
decontamination
95
Lighting
main switch
www.apem.com
SYMBOL
DESCRIPTION
APEM
K range
Symbols
Legend scale :
KR series : 1:1
CODE
SYMBOL
DESCRIPTION
CODE
SYMBOL
DESCRIPTION
CODE
SYMBOL
DESCRIPTION
96
Heating
using water
AD
-
AV
-
97
Low beam
AE
-
AW
-
98
Position
lights
AF
-
AY
-
99
Diesel
acceleration
AG
Battery charging
condition
(0247)
AZ
-
A1
Manual
mode
AH
Turn signals
(0084)
B1
-
A2
Clockwise
cabin rotation
AJ
High beam
(0082)
B2
-
A3
Anticlockwise
cabin rotation
AK
Differential lock,
bogie
(2600)
B3
-
A4
-
AL
Brushing with a
rotating brush
(0070)
A5
-
AM
Differential lock,
transfer case 4x4
(2475)
A6
Parking
brake
AN
Loader bucket,
float
(1441)
A7
-
AP
Loader bucket
(1437)
A8
-
AQ
Rear window
washer & wiper
(0098)
A9
-
AR
Header
Header drive
(1579)
AA
-
AS
Excavator/backhoe
boom side shift
(2091)
AB
-
AT
Chemical water
treatment
(1851)
AC
-
AU
Grapple skidder,
single funct° boom
(1762)
APEM
www.apem.com
33
K range
Accessories for KR, KL and KI series
56.00
(2.205)
3.80
(.150)
29.26
(1.152)
26.50
(1.043)
3.80
(.150)
U2261
SINGLE MOUNTING PANEL
56.00
(2.205)
MOUNTING PANEL MIDDLE
56.00
(2.205)
MOUNTING PANEL END
26.50
(1.043)
3.80
(.150)
26.26
(1.034)
U2262
26.50
(1.043)
32.26
(1.270)
U2267
Recommended panel thickness : 1,10 mm - 1,80 mm - 2,60 mm - 3,40 mm - 4,20 mm - 5 mm - 5,80 mm
MOUNTING PANEL CUT-OUT
For 1 element U2267
51.00 0/+0.20
(2.008 0/+.008)
77.50 0/+0.20
(3.051 0/+.008)
48.20 0/+0.20
(1.898 0/+.008)
48.20 0/+0.20
(1.898 0/+.008)
48.20 0/+0.20
(1.898 0/+.008)
For 3 elements (2xU2261 + 1x U2262)
For 2 elements U2261
25.00 0/+0.20
(.984 0/+.008)
For additional elements, add 26,40 mm (1.039)
ACTUATOR REMOVING TOOL
EXTRACT ACTUATOR (KR ONLY)
Allows the extraction of the rocker / rocker support assembly.
Place the 2 claws under the support and push as indicated by the arrow.
EXTRACT ROCKER (KR ONLY)
Allows to separate the rocker from its support.
Insert the tool between rocker and support as indicated by the arrrow. Pull out the tool in the
opposite direction.
EXTRACT SWITCH (KR, KL AND KI)
Allows to extract switch from panel mounting units. 2 tools are necessary.
Insert the tools between switch and panel mounting units from the rear to compress the snapin device. Pull off switch manually.
U3052
2 tools are supplied
34
www.apem.com
APEM
K range
Accessories for KR, KL and KI series
CONNECTORS
Standard colour : black. Other colours : on request.
Connectors cannot be combined with wiring types H and I.
U2282
U2292
10 terminal version
For use with terminals type H or J.
2,8 (.110) tabs to be fitted by the user
(example : AMP/Tyco 0-927779-3).
45.00
(1.772)
10 terminal version
For use with terminals type B, C, E or F.
6,35 (1/4) tabs to be fitted by the user
U2282
11.00
(.433)
20.40
(.803)
1
11.00
(.433)
20.80
(.819)
24.40
(.961)
29.40
(1.157)
24.40
(.961)
33.40
(1.315)
25.00
(.984)
U2292
6.30
(.248)
HOLE PLUGS
1.50
(.059)
11.00
(.433)
1
U2260
➀ poka-yoke
36.60
(1.441)
36.60
(1.441)
29.40
(1.157)
6 terminal version
For use with terminals type 2, 3, 4 or 5.
6,35 (1/4) tabs to be fitted by the user
Can be used for the KG series.
20.80
(.819)
U2260
Colour
Code
Colour
Blue
U2274
Grey
Dark blue
U2275
Yellow
U2272
Black
U2276
Red
U2273
Green
U2277
Ivory
U2279
Orange
U2271
U2271/4
1,50 mm to 6 mm
44.10
(1.736)
20.80
(.819)
25.00
(.984)
Code
22.00
(.866)
Usefull for future extensions.
46.80
(1.843)
Connectors can be hanged on specific hole plugs. Contact APEM.
APEM
www.apem.com
35
APEM,
a world of switching capabilities
The APEM group is one of the world’s largest manufacturers
of switches, switch panels and joysticks.
APEM designs, develops, manufactures and sells electromechanical components to multiple industrial markets
including: instrumentation, medical, security, communications,
industrial automation, avionics, military and transport.
Other APEM embedded products
" I " range of pushbuttons
This range consists of several series of IP67 sealed
pushbuttons (IP, IB, IS, IF, IA) and a large variety of
models: round or square, momentary or latching,
illuminated or non-illuminated, plastic or metallic, with
optional marking.
Specific switch panels
In addition to the switching function, specific switch
panels incorporate several other functions such as
illumination by LED, backlighting, EMC protection,
sealing, connection, support, mounting...
Applications for these products include transport and
utility vehicles, agricultural engines and boats.
Joysticks
APEM also manufactures joysticks for professional
applications. Easy to operate, reliable and designed
for extremely long service life, APEM joysticks are
offered with a wide range of options allowing to
satisfy a large variety of requirements. Several series
are available, each one based on a different
technology: switch joysticks, potentiometer joysticks
and contactless joysticks.
www.apem.com
K0806-A
Addresses of sales subsidiaries and distributors network on

K range

Transcription

Similar documents

Motor change instructions solder and push-on

Stolthaven New Orleans LLC

free! free delivery!

Clearance valve adjustment in 4D56 Mitsubishi engines

CaixaBank

Quality and Performance Built Right In

Bticino 334202 (5 Wire)

pdf

Swivel Rocker Assembly