Home Entertainment

Transcription

Home Entertainment
Contents // Home Collection
Kitchen and Storage
Storage Systems
Drawer Systems
Waste Management
Sinks & Taps
2-77
Laundry and Accessories
Laundry baskets
Laundry pull-outs
Ironing Boards
78-81
Living and Bedroom
Wardrobe Systems
Foldaway Bedding
82-92
Home Entertainment
LCD TV’s and Lift System
Audio / Video Storage
93-95
Home Office
Home Office Accessories
Cable Organisation
Desktop Organisation
Ellipta Accessories
Furniture Accessories
96-105
Lighting
Down Lighting
LED lighting
106-120
HHC.08
www.hafele.com
1
Kitchen and Storage
Accessories
2
www.hafele.com
HHC.08
KITCHEN AND STORAGE ACCESSORIES
• pantry units
• base cabinet storage units
• wire storage drawers, baskets and shelves
• undersink storage
• corner cabinet systems
• towel racks
• wine racks
• drawer systems
• waste management
• sinks and taps
HHC.08
www.hafele.com
3
dispensa pantr y units
• 70 KG PULL OUT PANTRY UNIT
Includes full extension bottom and top runner, height adjustable frame, door rails, front panel
brackets and installation instructions packed into a single box for ease of handling
Internal cabinet depth: 500 mm
Load capacity: 70 kg
Finish
Internal cab. height
Silver
1600 - 2000 mm
Silver
1600 - 2000 mm
Internal cab. width
260 mm
360 mm
Cat No.
546.60.202
546.60.212
PULL-OUT PANTRY UNIT
Upgrade to Soft Stopp dampening
546.74.790
• 100 KG PULL OUT PANTRY UNIT
PULL-OUT PANTRY UNIT
Includes full extension bottom and top runner, including Soft Stopp Plus, height adjustable frame,
door rails, front panel brackets, and installation instructions
4
www.hafele.com
Internal cabinet depth: 500 mm
Load capacity: 100 kg
Finish
Internal cab. height
Brilliant white
1200 - 1600 mm
Brilliant white
1600 - 2000 mm
Brilliant white
1900 - 2300 mm
Brilliant white
1200 - 1600 mm
Brilliant white
1600 - 2000 mm
Brilliant white
1900 - 2300 mm
Silver
1200 - 1600 mm
Silver
1600 - 2000 mm
Silver
1900 - 2300 mm
Silver
1200 - 1600 mm
Silver
1600 - 2000 mm
Silver
1900 - 2300 mm
Internal cab. width
260 mm
260 mm
260 mm
360 mm
360 mm
360 mm
260 mm
260 mm
260 mm
360 mm
360 mm
360 mm
Cat No.
546.71.626
546.71.646
546.71.666
546.71.636
546.71.656
546.71.676
546.71.222
546.71.243
546.71.262
546.71.232
546.71.252
546.71.272
l b a sk e ts
Fo r a d d i t io n a
ie s re fe r to
a n d a cc e s so r
p age s 6 & 7
HHC.08
PULL-OUT AND SWING PANTRY SET
swing pantr y units
• 70 KG SWING PANTRY
Swings left or right when fully extended. Set includes full extension bottom and top runner,
height adjustable frame with built-in dampener, front panel brackets and installation instructions
Internal cabinet depth: Min. 500 mm
Load capacity 70 kg
Finish
Internal cab. height
Brilliant white
1200 - 1400 mm
Brilliant white
1400 - 1600 mm
Brilliant white
1600 - 1800 mm
Brilliant white
1800 - 2000 mm
Brilliant white
2000 - 2200 mm
Internal cab. width
260 mm
260 mm
260 mm
260 mm
260 mm
Cat No.
546.69.671
546.69.672
546.69.673
546.69.674
546.69.675
Brilliant white
Brilliant white
Brilliant white
Brilliant white
Brilliant white
1200 - 1400 mm
1400 - 1600 mm
1600 - 1800 mm
1800 - 2000 mm
2000 - 2200 mm
360 mm
360 mm
360 mm
360 mm
360 mm
546.69.681
546.69.682
546.69.683
546.69.684
546.69.685
Silver
Silver
Silver
Silver
Silver
1200 - 1400 mm
1400 - 1600 mm
1600 - 1800 mm
1800 - 2000 mm
2000 - 2200 mm
260 mm
260 mm
260 mm
260 mm
260 mm
546.69.376
546.69.377
546.69.378
546.69.379
546.69.380
Silver
Silver
Silver
Silver
Silver
1200 - 1400 mm
1400 - 1600 mm
1600 - 1800 mm
1800 - 2000 mm
2000 - 2200 mm
360 mm
360 mm
360 mm
360 mm
360 mm
546.69.386
546.69.387
546.69.388
546.69.389
546.69.390
HHC.08
l b a sk e ts
Fo r a d d i t io n a
ie s re fe r to
a n d a cc e s so r
p age s 6 & 7
www.hafele.com
5
pantr y unit accessories
• CLIP-ON ARENA STYLE SHELF SET
• BOTTLE BASKET
Finish: Coated particle board and chrome-plated steel
Anti Slip base
Internal cab. width Cat. No.
260 mm
546.75.253
360 mm
546.75.254
Finish: Chrome-plated steel
Internal cab. width Cat. No.
260 mm
546.75.260
360 mm
546.75.270
• CLIP-ON ARENA SHELF
• HOOK-IN BASKET
Finish: Coated particle board and
Chrome-plated steel
Anti Slip base
Internal cab. width Cat. No.
260 mm
546.75.243
360 mm
546.75.244
Finish: Chrome-plated steel
Internal cab. width Cat. No.
260 mm
545.86.217
360 mm
545.86.220
• HOOK-IN BASKET
• CLIP-ON AKIS SHELF
Finish: Chrome-plated steel
Internal cab. width Cat. No.
260 mm
546.75.204
360 mm
546.75.213
410 mm
546.75.280
460 mm
546.75.290
Finish: White powder-coated steel
Internal cab. width Cat. No.
260 mm
546.75.704
360 mm
546.75.713
Finish: Plastic aluminium
Anti Slip base
Internal cab. width Cat. No.
260 mm
552.10.535
360 mm
552.10.545
Finish: White powder-coated steel
Internal cab. width Cat. No.
260 mm
545.86.711
360 mm
545.86.720
• TRAY FOR HOOK-IN BASKET
Finish: White plastic
Internal cab. width Cat. No.
260 mm
546.75.780
360 mm
546.75.781
6
www.hafele.com
HHC.08
pantr y unit accessories
• BASKET SUPPORT
2 pieces required when pantry unit is extended
Height: 125 mm
Finish: Powder coated, steel
For cabinet width
Cat. No.
Silver
545.84.280
• RETAINING CLIP
For hook-in baskets
Finish: Grey plastic
Cat. No.
546.75.090
• CROSS BAR
To clip onto the hook-in baskets
Finish: Chrome-plated steel with black plastic
fixing clips
For cabinet width
Cat. No.
400 mm
545.89.221
HHC.08
• STORAGE CONTAINER SET
• STORAGE TRAY SET
For the storage of dry goods
Set consists of: 1 grey support rail and
4 translucent plastic containers with grey lids
Container capacity: 500 ml
Cat. No.
546.79.500
For spices, packets and small pantry items
Set consists of: 1 grey support rail and
2 translucent plastic containers
Cat. No.
546.79.510
www.hafele.com
7
tandem pantr y units
The Tandem was originally developed for 450, 500, and 600 mm cabinets. With kitchens becoming more than a cooking space
the demand for larger storage became imperative. The Tandem Depot – suit cabinet widths of 900, 1000 and 1200 mm.
TANDEM
• PANTRY UNIT - TANDEM
For cabinet widths between 450 and 600 mm. Complete set consists of runner, pull-out frame,
trays/basket and doorshelf (trays/baskets). Including Soft Stopp damping system.
Maximum load capacity rear shelf = 60 kg
Maximum load capacity front shelf = 25 kg
ETE
SET
S
• SET ARENA STYLE
• SET ARENA CLASSIC
• SET WIRE BASKETS
All components in brilliant white; trays ARENA Style:
gallery bright chrome, bottom “Ice White” with Anti Slip coating
all components in silver; trays ARENA Classic: gallery bright
chrome, bottom “Standard White” with Anti Slip coating
All components in silver; baskets: bright chrome
Min. Internal cabinet width 412 mm
inside cabinet Number of
Cat. No.
height mm Trays
Min. Internal cabinet width 412 mm
inside cabinet Number of
Cat. No.
height mm Trays
545.94.611
545.94.612
Min. Internal cabinet width 412 mm
inside cabinet Number of
Cat. No.
height mm Trays
1100
each 4
545.94.111
1700
each 6
545.94.112
Min. Internal cabinet width 462 mm
1100
each 4
545.94.631
1700
each 6
545.94.632
Min. Internal cabinet width 462 mm
1100
each 4
545.94.131
1700
each 6
545.94.132
Min. Internal cabinet width 462 mm
1100
each 4
545.94.121
1700
each 6
545.94.122
Min. Internal cabinet width 562 mm
1100
each 4
545.94.651
1700
each 6
545.94.652
Min. Internal cabinet width 562 mm
1100
each 4
545.94.151
1700
each 6
545.94.152
Min. Internal cabinet width 562 mm
1100
each 4
545.94.141
1700
each 6
545.94.142
1100
1700
8
PL
COM
each 4
each 6
www.hafele.com
1100
1700
each 4
each 6
545.94.101
545.94.102
HHC.08
studio pantr y units
A
B
C
D
E
C
STUDIO
LE
OMP
ET
TE S
S
A = Drawer H95
B = Inset drawer
C = Pot drawer with railing
D = Inset Pot drawer with railing
E = Pot drawer with railing
A + C + E are connected to the front
Cabinet width 500 mm
• STUDIO PANTRY UNIT
Includes full extension, soft-closing runners with 40 kg load capacity per drawer
Finish
Stainless steel
Alu-metallic
White
HHC.08
internal cab. width
468 mm
468 mm
468 mm
Cat. no.
559.79.005
559.79.905
559.79.705
www.hafele.com
9
pantr y pull-out
Twin sets in the kitchen.
Coffee, sugar and milk to the
right, cups and crockery to the
left – or vice-versa.
With the Kesseböhmer pull-out
pantry the choice is yours.
Your personal theme can be
created to best suit your special
individual requirements.
High cabinet or base cabinet,
your choice ...
C
ET
TE S
S
• PANTRY PULL-OUT
• PANTRY PULL-OUT
• PANTRY PULL-OUT
Includes pull-out frame with Soft Stopp, 20 kg load capacity,
3 trays Arena Style
Includes pull-out frame with Soft Stopp, 20 kg load capacity,
3 trays Arena Classic
Anti Slip coating
Includes pull-out frame with Soft Stopp, 20 kg load capacity,
3 baskets, bright chrome polished
Internal cabinet height: 870 mm
Internal cabinet height: 870 mm
Anti Slip coating
Internal cabinet height: 870 mm
Finish
Brilliant white
Brilliant white
Brilliant white
10
LE
OMP
Internal cab. width
380 mm
515 mm
650 mm
www.hafele.com
Cat. No.
545.78.631
545.78.651
545.78.671
Finish
Silver
Silver
Silver
Internal cab. width
380 mm
515 mm
650 mm
Cat. No.
545.78.331
545.78.351
545.78.371
Finish
Silver
Silver
Silver
Internal cab. width
380 mm
515 mm
650 mm
Cat. No.
545.78.330
545.78.350
545.78.370
HHC.08
le mans full swing cor ner system
Versatility in the kitchen.
Depending on space, the Le Mans shelves can be placed in the cabinet
at your discretion. Two, three or even four shelves can be placed above
each other. The Le Mans highboard is a fine example of how the elegant
ARENA design can transform simple crockery cabinets into fascinating
high-end solutions.
• Left swivel shown
• LE MANS CORNER SOLUTION
Complete set includes mounting and drilling template.
Maximum load capacity per shelf = 20 kg
Left swivel unit shown
CO
ETE
MPL
SET
S
LE MANS HIGHBOARD
• Left swivel shown
• SET ARENA STYLE
• SET ARENA CLASSIC
All components in brilliant white; trays ARENA Style:
gallery bright chrome, bottom “Ice White” with Anti Slip coating
All components in brilliant white; trays ARENA Classic: gallery bright chrome, bottom “Standard White”
with Anti Slip coating
inside cabinet
height (mm)
inside cabinet
dimensions (mm)
W=860 x D=500
Door width 450
inside cabinet
dimensions (mm)
W=960 x D500
Door width 500
inside cabinet
dimensions (mm)
W=960 x D=500
Door width 600
Cat. No
541.33.680
541.33.686
541.33.692
541.33.681
541.33.687
541.33.693
Cat. No
541.33.682
541.33.688
541.33.694
541.33.683
541.33.689
541.33.695
Cat. No
541.33.684
541.33.690
541.33.696
541.33.685
541.33.691
541.33.697
600-750
720-900
fix 1250
600-750
720-900
fix 1250
number of trays
2-right swivel
2-right swivel
4-right swivel
2-left swivel
2-left swivel
4-left swivel
Option:
Hinge damper set 541.33.900 (2 pieces)
HHC.08
inside cabinet
height (mm)
inside cabinet
dimensions (mm)
W=860 x D=500
Door width 450
inside cabinet
dimensions (mm)
W=960 x D=500
Door width 500
inside cabinet
dimensions (mm)
W=960 x D=500
Door width 600
Cat. No
541.33.280
541.33.286
541.33.292
541.33.281
541.33.287
541.33.293
Cat. No
541.33.282
541.33.288
541.33.294
541.33.283
541.33.289
541.33.295
Cat. No
541.33.284
541.33.290
541.33.296
541.33.285
541.33.291
541.33.297
600-750
720-900
fix 1250
600-750
720-900
fix 1250
number of trays
2-right swivel
2-right swivel
4-right swivel
2-left swivel
2-left swivel
4-left swivel
Option:
Hinge damper set 541.33.900 (2 pieces)
www.hafele.com
11
magnia powerslide cor ner system
Magnia Powerslide. These smooth, attractive, contoured
carousel trays move independently of each other, offering full
extension and fluid movement. Self and soft-close carousel
trays pull directly out allowing full access to returning cabinets
making for easy loading or unloading.
• Right hand unit shown
12
CO
ETE
MPL
SET
S
• MAGNIA POWERSLIDE PULL-OUT CORNER UNIT
• MAGNIA POWERSLIDE PULL-OUT CORNER UNIT
• MAGNIA POWERSLIDE PULL-OUT CORNER UNIT
Includes pole, 2 x Magnia Trays, built in Soft Stopp fitting, 20 kg
load capacity per shelf
For door width 450 mm. Cabinet width 1000 mm
Finish
Cat. No.
White silky gloss, chrome Left hand unit
541.58.721
White silky gloss, chrome Right hand unit 541.58.720
Includes pole, 2 x Magnia Trays, built in Soft Stopp fitting, 20 kg
load capacity per shelf
For door width 500 mm. Cabinet width 1000 mm
Finish
Cat. No.
White silky gloss, chrome Left hand unit
541.58.723
White silky gloss, chrome Right hand unit 541.58.722
Grey silky gloss, chrome
Left hand unit
541.58.423
Grey silky gloss, chrome
Right hand unit 541.58.422
Includes pole, 2 x Magnia Trays, built in Soft Stopp fitting, 20 kg
load capacity per shelf
For door width 600 mm. Cabinet width 1000 mm
Finish
Cat. No.
White silky gloss, chrome Left hand unit
541.58.725
White silky gloss, chrome Right hand unit 541.58.724
www.hafele.com
HHC.08
magic corner pull-out & rotating cabinets
The corner cabinet door slides out
and swivels to reveal the content
within. Items from the back of the
cupboard are now easily
accessible. See every item in your
kitchen cabinet and find exactly what
you are looking for!
This European design is ideal for left
and right handed cupboards and
glides effortlessly when
opening or closing.
MAGIC CORNER
C
LE
OMP
ET
TE S
S
• Right hand versions shown above
• MAGIC CORNER BASKET SET
• MAGIC CORNER ARENA SHELF SET
• MAGIC CORNER WIRE SHELF SET
Set ARENA Style with Soft Stopp
All components in brilliant white; trays ARENA Style:
gallery bright chrome, bottom “Ice White” with Anti Slip coating
Inside cabinet dimensions (mm):
W=860-970 x D=500
Cat. No.
Right swivel
546.17.602
Left swivel
546.17.603
Set ARENA Classic with Soft Stopp
All components in brilliant white; trays ARENA Style:
gallery bright chrome, bottom “Ice White” with Anti Slip coating
Inside cabinet dimensions (mm):
W=860-970 x D=500
Cat. No.
Right swivel
546.17.306
Left swivel
546.17.307
Set wire baskets with Soft Stopp
All components in silver; baskets: bright chrome
Inside cabinet dimensions (mm):
W=860-970 x D=500
HHC.08
Right swivel
Left swivel
Cat. No.
546.17.304
546.17.305
www.hafele.com
13
mondo II revolving corner units
These revolving corner cabinet shelves
allow the kitchen user a variety of choices
and feature anti-slip bases, which help to
stop pots and pans from moving when the
shelves are rotated.
Featuring a fully contoured back which
prevents items from falling and jamming
the mechanism.
MONDO 2K
PL
COM
S
• 3/4 REVOLVING CORNER UNIT
• 3/4 REVOLVING CORNER UNIT
• TIMBER CHOPPING BOARD
Complete with cabinet, without doors
Grey Anti Slip shelves for 90º angled doors
Complete with cabinet, convex doors and
white Anti Slip shelves
Width across corners: 900 x 900 mm
Door finish: stainless steel colour, smooth
Cat. No.
542.27.211
Door finish: aluminium colour, corrugated
Cat. No.
542.27.231
Timber chopping board optional
For convex shape revolving corner cabinet suitable for Mondo 2K
Finish: steamed beech
Cat. No.
542.27.799
Width across corners:
900 x 900 mm
Cat. No.
542.24.593
800 x 800 mm
Cat. No.
542.24.783
14
ETE
ETS
www.hafele.com
HHC.08
mondo 2m revolving corner units
The Mondo 2M is your complete corner storage solution. With a gentle push,
the doors fold inwards and out of the way, the shelves glide effortlessly bringing the
cupboard contents within easy reach. Doors gently soft-close into the closed position.
Featuring a fully contoured back which prevents items from falling and jamming
the mechanism.
MONDO 2M CORNER CABINET
• 3/4 MONDO 2M CORNER CABINET
Complete with cabinet, unassembled, without doors
Grey shelves for 90º angled doors, 1950 mm cabinet width
Width across corners: 900 x 900 mm
Cat. No.
542.29.210
CO
HHC.08
ETE
MPL
SET
S
www.hafele.com
15
revo 90º revolving corner units
Newly developed control mechanisms –
REVOfit and a rotation absorber enables
a smooth train of motion through all
phases – from the soft retraction of the
doors to automatic soft-closing.
The closing speed can be adjusted
without tools.
Optimal space utilisation is provided by
the adjustable shelves, with the
allowance of an additional third shelf.
The Round Solution for Corner Cabinets
CO
Revo Softclose Mechanism
ETE
MPL
SET
S
• 3/4 REVOLVING CORNER UNIT
Complete set for corner cabinet with Arena Style Anti Slip base
and Soft Stopp plus
Set includes: Complete fitting set, top panel bracket and 2 x 3/4
circle revolving shelves with Anti Slip base
800 mm corner cabinet
Cat. No.
541.46.632
• SET ARENA STYLE
• SET ARENA CLASSIC
• SET WIRE BASKETS
All components in silver; trays ARENA Style: Gallery bright chrome,
bottom “Ice White” with Anti Slip coating
800 mm
900 mm
number of trays
Cat. No.
Cat. No.
2
541.46.632
541.46.633
All components in silver; trays ARENA Classic: Gallery bright
chrome, bottom “Standard White” with Anti Slip coating
800 mm
900 mm
number of trays
Cat. No.
Cat. No.
2
541.46.232
541.46.233
All components in silver; 2 x wire baskets, bright chrome polished
ACCESSORIE
16
800 mm
Cat. No.
541.46.222
900 mm
Cat. No.
541.46.223
S
• LID RACK
• DIVIDER
For storage of pot and pan lids on shelves
Clip-on
Finish: Chrome-plated polished steel wire
Dimensions (W x D x H): 450 x 150 x 40 mm
Cat. No.
541.46.970
To divide shelves for storage
Clip-on
Finish: Chrome-plated polished steel wire
Dimensions (W x D x H): 370 x 370 x 150 mm
Cat. No.
541.46.969
www.hafele.com
number of trays
2
HHC.08
¾ revolving corner cabinet fittings
C
LE
OMP
ET
TE S
S
• 3/4 REVOLVING CORNER UNIT
• 3/4 REVOLVING CORNER UNIT
• 3/4 REVOLVING CORNER UNIT
Complete set corner cabinet with Arena Classic Anti Slip base
Internal cabinet heights: 839 - 889 mm
Set includes: Complete fitting including spindle and 2 x 3/4
revolving shelves with Anti Slip base
800 mm corner cabinet
Cat. No.
542.31.282
900 mm corner cabinet
Cat. No.
542.31.292
Complete set corner cabinet with wire baskets
Set includes: Complete fitting set and 2 x 3/4 revolving chrome
wire shelves
800 mm corner cabinet
Cat. No.
541.53.202
900 mm corner cabinet
Cat. No.
541.53.203
Includes revolving fitting and 2 high impact revolving trays
HHC.08
Height: 667 - 723 mm
Diameter - 720 mm
Cat. No.
541.40.823
Diameter - 820 mm
Cat. No.
541.40.837
www.hafele.com
17
½ revolving corner fittings
C
18
LE
OMP
ET
TE S
S
• SEMICIRCULAR REVOLVING
CORNER FITTINGS AND SHELVES
• SEMICIRCULAR REVOLVING
CORNER FITTINGS AND SHELVES
• SEMICIRCULAR REVOLVING
CORNER FITTINGS AND SHELVES
• SEMICIRCULAR REVOLVING
CORNER FITTINGS AND SHELVES
Includes: Revolving fitting, 2 white ARENA
Anti Slip shelves and one door follower
Height:
565 mm
Radius:
750 mm
Cat. No.
542.30.221
Radius:
850 mm
Cat. No.
542.30.231
Includes: Revolving fitting, 2 chrome-plated wire
baskets and one door follower
Height:
495 – 652 mm
Radius:
750 mm
Cat. No.
541.19.392
Radius:
850 mm
Cat. No.
541.19.382
Includes: Revolving fitting, 2 grey plastic Anti Slip
shelves and one door follower
Height:
520 mm
Radius:
750 mm
Cat. No.
541.54.311
Radius:
850 mm
Cat. No.
541.54.321
Includes: revolving fitting, 2 white plastic
shelves and one door follower
Height:
520 mm
Radius:
750 mm
Cat. No.
541.54.310
Radius:
850 mm
Cat. No.
541.54.320
www.hafele.com
HHC.08
base cabinet pull-out storage unit
The Kesseböhmer 150 mm cabinets offer
a welcome spacefiller.
When near the oven, these units are the
convenient solution for spices, baking
trays, the indispensible tea-towel.
The high quality chrome equipment lends
even these smallest cabinets in a kitchen
that special touch of elegance.
• BASE CABINET PULL-OUT CLASSIC
Complete set with metal tray and built-in Soft Stopp
dampening, 12 kg load capacity
Inside cab. Number of trays
Cat. No.
height (mm)
540
2
545.61.232
755
3
545.61.229
Additional dividers in CLASSIC
Cat. No.
545.61.250
C
LE
OMP
ET
TE S
S
• BASE CABINET PULL-OUT STYLE
• TOWEL RAIL, PULL-OUT STYLE
• BAKING TRAY, PULL-OUT STYLE
Complete set with metal trays and built-in Soft Stopp
dampening, 12 kg load capacity
Inside cab. Number of trays
Cat. No.
height (mm)
540
2
545.61.028
755
3
545.61.029
Additional dividers base unit - STYLE
Cat. No.
545.61.252
Complete set with metal trays and built-in Soft Stopp
dampening, 12 kg load capacity
Inside cab.
Cat. No.
height (mm)
590
546.61.063
Towel rail pull-out - CLASSIC
Inside cab.
Cat. No.
height (mm)
590
546.61.263
Complete set with metal tray and built-in Soft Stopp
dampening, 12 kg load capacity
Inside cab.
Cat. No.
height (mm)
590
546.61.073
Baking tray pull-out - CLASSIC
Inside cab.
Cat. No.
height (mm)
590
546.61.273
HHC.08
www.hafele.com
19
base cabinet pull-out storage unit
The simplest solutions are
often the most effective.
The provisions of everyday life
sometimes put our kitchens to
the test. For example bread...
The Kesseböhmer solution for
this is a comfortable pull-out
with a tough liner bag which
contains the bread perfectly.
In addition, drinks and other
supplies find their ideal home.
• BREAD AND BOTTLE BASKET
Complete set with full extension frame, 1 bottle rack,
2 baskets with 1 bag for bread. Soft Stopp dampener,
12 kg load capacity per shelf
Inside cab.
Inside cab.
Cat. No.
height (mm)
width (mm)
590
243
545.59.289
20
www.hafele.com
HHC.08
comfort base cabinet pull-out storage unit
With pull-out base cabinet
storage units, the entire depth
of cabinet is within reach,
helping to increase storage
space.
With your choice of two
heights and four widths,
baskets suit most cabinets.
Full extension and built-in
Soft Close dampener are
standard features of the
pull-out storage units.
or
S e e p a g e 22 f
et
s to ra g e b a sk
se le c t io n .
• EXTENSION FRAME
Includes built-in Soft Stopp dampener
Load capacity: 25 kg
Width: 38 mm
Depth: 470 mm
Finish: Powder coated silver, steel
Left mounted
Height
Cat. No.
599 mm
545.59.266
663 mm
545.59.267
Right mounted
Height
Cat. No.
599 mm
545.59.276
663 mm
545.59.277
Finish: Powder coated brilliant white
Left mounted
Height
Cat. No.
599 mm
545.59.683
663 mm
545.59.685
Right mounted
Height
Cat. No.
599 mm
545.59.682
663 mm
545.59.684
HHC.08
• FRONT BRACKET
Includes 1 piece, 2 pieces required per frame
Finish: Powder coated silver, steel
Angle
Cat. No.
45˚
545.59.296
90˚
545.59.298
Finish: Brilliant white
Left mounted
Height
Cat. No.
599 mm
545.59.683
663 mm
545.59.685
Finish: Brilliant white
Right mounted
Height
Cat. No.
599 mm
545.59.682
663 mm
545.59.684
www.hafele.com
21
comfort base cabinet pull-out storage unit
COMFORT BASE STORAGE
22
• HOOK-IN STORAGE BASKET
• HOOK-IN STORAGE BASKET
• HOOK-IN STORAGE SHELF SET
Finish: Chrome-plated steel
Dimensions (W x D x H) Cat. No.
110 x 470 x 75 mm
545.60.208
160 x 470 x 75 mm
545.60.217
210 x 470 x 75 mm
545.60.244
320 x 470 x 75 mm
545.60.253
For 45º angle
Finish: Chrome-plated steel
Dimensions (W x D x H): 228 x 467 x 74 mm
For angle
Cat. No.
45º right
545.60.224
45º left
545.60.234
With Anti Slip base - 2 shelf set
Finish: Arena Style, white coated particle board and
polished chrome-plated steel
Dimensions
Cat. No.
(W x D x H mm)
160 x 470 x 75
545.60.671
228 x 470 x 75
545.60.672
295 x 470 x 75
545.60.673
• HOOK-IN STORAGE SHELF
• HOOK-IN STORAGE SHELF
• BOTTLE BASKET
With Anti Slip base
Finish: White coated particle board and polished
chrome-plated steel
Dimensions (W x D x H) Cat. No.
110 x 470 x 88 mm
545.60.275
160 x 470 x 88 mm
545.60.276
320 x 470 x 88 mm
545.60.277
For 45º angle
With Anti Slip base
Finish: White coated particle board and
polished chrome-plated steel
Dimensions (W x D x H): 228 x 470 x 88 mm
For angle
Cat. No.
45º right
545.60.286
45º left
545.60.296
Finish: Chrome-plated steel
Internal cab. width Cat. No.
260 mm
546.75.260
360 mm
546.75.270
www.hafele.com
HHC.08
dispensa junior pantry units
This practical mini
pull-out “Larder Unit”
offers height adjustable
baskets and trays for
easy reach to contents
from above or either
side.
Personalise your storage
organisation with your
choice of two heights
and five widths.
ILAB
AVA
009
LE 2
Full extension and
Soft Stopp dampening
are standard features of
the ‘Mini Larder Unit”.
DISPENSA JUNIOR
• DISPENSA JUNIOR SET
• DISPENSA JUNIOR SET
• DISPENSA JUNIOR SET
Includes pull-out frame with Soft Stopp, 45 kg load capacity,
3 clip-on trays + 1 bottom tray in Arena style Anti Slip coating
Minimum internal cabinet height: 630 mm
Finish
Internal cab. width
Cat. No.
Brilliant white
260 mm
545.55.641
Brilliant white
360 mm
545.55.642
Brilliant white
410 mm
545.55.643
Brilliant white
460 mm
545.55.644
Brilliant white
560 mm
545.55.645
Includes Bottle Rack
545.55.315
Includes pull-out frame with Soft Stopp, 45 kg load capacity,
3 clip-on trays + 1 bottom tray in Arena Anti Slip coating
Minimum internal cabinet height: 630 mm
Finish
Internal cab. width
Cat. No.
Silver
260 mm
545.55.321
Silver
360 mm
545.55.322
Silver
410 mm
545.55.323
Silver
460 mm
545.55.324
Silver
560 mm
545.55.325
Includes pull-out frame with Soft Stopp, 45 kg load capacity,
3 clip-on baskets + 1 bottom basket, bright chrome polished
Minimum internal cabinet height: 630 mm
Finish
Internal cab. width
Cat. No.
Silver
260 mm
545.55.301
Silver
360 mm
545.55.302
Silver
410 mm
545.55.303
Silver
460 mm
545.55.304
Silver
560 mm
545.55.305
HHC.08
www.hafele.com
23
base cabinet storage drawers
• SPACING BAR
For hinged doors
1 piece required per storage drawer used behind
hinged doors
Finish
Cat. No.
White
540.24.927
Chrome 540.24.922
• INTERNAL STORAGE DRAWER
• FRONT PANEL STORAGE DRAWER
• INTERNAL STORAGE DRAWER
For behind front panel
Finish: Chrome-plated steel, galvanised runner with
soft closing action and full extension
For cabinet width
Cat. No.
400 mm
540.25.283
450 mm
540.25.284
500 mm
540.25.285
600 mm
540.25.287
To attach to front panel
Finish: Chrome-plated steel, galvanised runners with
soft closing action and full extension
For cabinet width
Cat. No.
400 mm
540.24.283
450 mm
540.24.284
500 mm
540.24.285
600 mm
540.24.287
For behind hinged doors
Finish: Chrome-plated steel, galvanised runners with
soft closing action and full extension
For cabinet width
Cat. No.
450 mm
540.27.284
500 mm
540.27.285
600 mm
540.27.287
Please order spacing bar separately.
24
• INTERNAL STORAGE DRAWER
• FRONT PANEL STORAGE DRAWER
• INTERNAL STORAGE DRAWER
For behind front panel
With white coated Anti Slip base, galvanised runner with
soft closing action and full extension
For cabinet width
Cat. No.
400 mm
540.25.293
450 mm
540.25.294
500 mm
540.25.295
600 mm
540.25.297
To attach to front panel
With white coated Anti Slip base, galvanised runner with
soft closing action and full extension
For cabinet width
Cat. No.
400 mm
540.24.293
450 mm
540.24.294
500 mm
540.24.295
600 mm
540.24.297
For behind hinged doors
With white coated Anti Slip base, galvanised runner with
soft closing action and full extension
For cabinet width
Cat. No.
450 mm
540.27.294
500 mm
540.27.295
600 mm
540.27.297
www.hafele.com
Please order spacing bar separately.
HHC.08
portero base cabinet storage unit
PORTERO
• PORTERO CLEANING AGENT PULL-OUT
• PORTERO CLEANING AGENT PULL-OUT
• PORTERO CLEANING AGENT PULL-OUT
Set component complete with base and dividers,
fitted with Soft Stopp.
Finish: Silver/bright chrome
Set component complete with base and dividers,
fitted with Soft Stopp.
Finish: Silver/bright chrome
Set component complete with base and dividers,
fitted with Soft Stopp.
Finish: Silver/bright chrome
inside cabinet
height (mm)
inside cabinet
height (mm)
inside cabinet
width min.290 mm
inside cabinet
height (mm)
Cat. No
545.48.261
min 511 mm
min 400 mm
HHC.08
inside cabinet
width min.180 mm
number of baskets
1
Cat. No
545.48.260
number of baskets
min 400 mm
2
1 portable basket and
basket without handle
number of baskets
3
1 portable basket
1 basket without handle
and 1 swivel basket
inside cabinet
width min.290 mm
Cat. No
545.48.262
www.hafele.com
25
undersink & cooktop area storage
Häfele offers a range of safety
and storage products that do
not compromise the design of
today’s modern kitchen.
The cooktop area protector
keeps children away from the
hot surface, while the
undersink storage with lock,
keeps dangerous cleaning
agents out of reach.
26
• COOKTOP PULL-OUT SHELF
• UNDERSINK PULL-OUT
• CLEANING AGENT STORAGE UNIT WITH LOCK
For mounting beneath cooktops without cabinets
Includes safety-hooks
Height: 40 mm
Extension length: 365 mm
Installation length: 530 mm
Finish: Chrome-plated steel
Installation width Cat. No.
600 mm
545.39.212
900 mm
545.39.221
Can be used on right or left side
Includes guide for screw-mounting
Extension length: 335 mm
Finish: Chrome-plated steel
Installation width Cat. No.
135 mm
545.48.238
235 mm
545.48.239
Right or left mounted
Includes guide
Dimensions (W x L x H): 202 x 432 x 440 mm
Finish: Chrome-plated steel
Cat. No.
545.48.248
www.hafele.com
HHC.08
vario alu-line undersink pull-out storage unit
The undersink pull-out storage
is ideal for keeping everyday
products organised but out of
sight. With practical clips, the
elements can be situated to
individualise the unit and
increase space-saving storage
and organisation.
• UNDERSINK PULL-OUT UNIT
Left or right hand installation
Load capacity: 10 kg
Extension: 500 mm
Dimensions (W x D x H): 158 x 490 x 481mm
Finish: Aluminium with grey plastic parts
Cat. No.
545.27.510
HHC.08
• UNDERSINK PULL-OUT UNIT
Left or right hand installation
Load capacity: 10 kg
Extension: 500 mm
Dimensions (W x D x H): 158 x 490 x 496 mm
Finish: Aluminium with grey plastic parts
Cat. No.
545.27.520
www.hafele.com
27
pull-out towel racks
• PULL-OUT TOWEL RACK
• PULL-OUT TOWEL RACK
Top or side mounted
Includes extendible chrome-plated arms
2 arms
Cat. No.
510.37.220
3 arms
Cat. No.
510.37.239
Undermount or side mounted
Includes 2 extendible silver anodised arms
Cat. No.
510.54.921
• SECCO-ALULINE TOWEL HOLDER
• PULL-OUT TOWEL RACK
Undermount or side mounted
Includes 3 extendible silver anodised arms
Cat. No.
510.54.932
28
www.hafele.com
Undermount or side mounted
Suitable for right or left hand installation
Includes silver-colour anodised aluminium
arms
2 arms
Cat. No.
510.06.520
3 arms
Cat. No.
510.06.550
HHC.08
wire storage shelves
• WIRE SHELVES
Complete with 1 shelf, 4 shelf supports and fixing screws
Depth of rack: 260 mm
Internal cabinet
width mm
Cat. No.
412/418
545.71.201
462/468
545.71.202
562/568
545.71.203
762/768
545.71.204
862/868
545.71.205
962/968
545.71.206
1162/1168
545.71.207
Depth of rack: 445 mm
Internal cabinet
width mm
Cat. No.
412/418
545.71.211
462/468
545.71.212
562/568
545.71.213
762/768
545.71.214
862/868
545.71.215
962/968
545.71.216
1162/1168
545.71.217
Depth of rack: 490 mm
External cabinet
width mm
Cat. No.
450
545.71.221
500
545.71.222
600
545.71.223
800
545.71.224
900
545.71.225
1000
545.71.226
1200
545.71.227
• WINE RACK
• WINE RACK
Holds 30 bottles
For screw fixing between panels
Includes: fixing bolts and insert nuts
Material: Steel wire
Finish: Chrome-plated, polished
Size (W x H x D): 566 x 545 x 220 mm
Cat. No.
541.99.210
Holds 15 bottles
For screw fixing to panel
Material: Steel wire
Finish: Chrome-plated, polished
Size (W x H x D): 260 x 624 x 185 mm
Cat. No.
541.92.200
HHC.08
www.hafele.com
29
foldaway and pull-out table fittings
The simple design of foldaway fittings is an ideal way to increase the usable workspace area in
your kitchen and provide a practical solution for storage. Use them to store your cutting boards,
blender, toaster or juicer and gain more space for preparing meals and snacks.
• FOLDAWAY FITTING
For kitchen appliances
10 kg load capacity
Colour: white
For cabinet width Cat. No.
350-600 mm
504.22.421
Top not included
• PULL-OUT TABLE FITTING
Self-supporting with load capacity 100 kg
For cabinet width Cat. No.
600 mm
505.70.200
30
www.hafele.com
HHC.08
timber kitchen products
The butcher’s table makes for an ideal additional preparation
area, complete with slide-out chopping board, serving tray,
bottle rack and drawer. The castors allow the unit to be moved
easily where it is needed most.
• BUTCHER’S TABLE
Includes drawer, chopping board, serving tray and bottle rack
Finish: rubberwood
Cat. No.
568.80.300
• WIRE BASKET WITH RUNNERS
Finish: Steel, chrome-plated polished
Cabinet
Height
Width
(mm)
450 mm
150
450 mm
280
450 mm
430
600 mm
150
600 mm
280
600 mm
430
900 mm
150
900 mm
280
900 mm
430
Cat. No.
541.70.262
541.70.264
541.70.266
541.71.262
541.71.264
541.71.266
541.72.262
541.72.264
541.72.266
BALLBEARING BASKET RUNNERS
Finish: Steel, zinc-plated
Length
400 mm
HHC.08
Cat. No.
541.78.941
www.hafele.com
31
timber kitchen products
• PULL-OUT WICKER BASKETS
• STORAGE BASKET
Wicker basket with beech timber frame
Finish: white translucent with beech frame
For cabinet width
400 mm
500 mm
600 mm
Cabinet width
450 mm
500 mm
600 mm
Cat. No.
540.57.001
540.57.002
540.57.003
Cat. No.
540.57.715
540.57.716
540.57.718
Order beech drawer runners separately
Order beech drawer runners separately
• BEECH DRAWER RUNNERS
• PULL-OUT CHOPPING BOARD
For wicker baskets and chopping board
Pre-drilled and lacquered
Length: 449 mm
Cat. No.
540.57.991
Finish: Unfinished beech timber, with fish symbol
For cabinet width
500 mm
600 mm
Cat. No.
540.57.111
540.57.112
Order beech drawer runners separately
32
www.hafele.com
HHC.08
worktop support brackets
• WORKTOP SUPPORT BRACKET INCLINED TUBE
Finish: Chrome-plated
Diameter: 50 mm
For screw mounting to timber
Cat. No.
505.15.210
For gluing to glass
Cat. No.
505.15.211
• WORKTOP SUPPORT BRACKET STRAIGHT TUBE
Finish: Chrome-plated
Diameter: 50 mm
For screw mounting to timber
Cat. No.
505.15.200
For gluing to glass
Cat. No.
505.15.201
• GLASS ADHESIVE (NOT SHOWN)
Rhodia 3B, silicon adhesive
310 ml tube
Cat. No.
405.54.020
HHC.08
www.hafele.com
33
swing up fittings
SALICE SMOVE
f in d o u t
C o n t a c t u s to
h ic h s w in g
m o re a b o u t w
t io n w il l
u p f i t t in g so lu
d e si g n !
be s t f i t yo ur
Components for timber doors
Upper timber door with lower
45 mm aluminium framed door
SALICE FLAP
Upper 45 mm aluminium framed
door with lower timber door
45 mm aluminium framed doors
34
www.hafele.com
HHC.08
swing up fittings
SYN
CHR
ON
f in d o u t
C o n t a c t u s to
h ic h s w in g
m o re a b o u t w
t io n w il l
u p f i t t in g so lu
d e si g n !
be s t f i t yo ur
SWING UP
SWING OVER
HORIZONTAL BIFOLD
OVERHEAD FLAP
• SYNCHRON FLAP FITTING
Finish: Aluminium, bright
Excludes doors, mechanism only
for timber and aluminium doors
Cabinet height
Cat. No.
600 mm
365.20.002
720 mm
365.20.003
For additional information on the complete range of Häfele door fittings please call 0800 4 HAFELE, contact your nearest Häfele
Sales Office or simply visit www.hafele.com
HHC.08
www.hafele.com
35
flap fittings
SWING UP FLAP FITTING
• FOR TIMBER FLAPS
• FOR ALUMINIUM FRAMED DOOR FLAPS
Material: Steel
Finish: Silver
2 gas loaded springs with force up to 380 N
Panel weight: Max. 8.5 kg
Concealed front fixing, screw fixing
Max. internal cabinet width: 870 mm
Spring force Weight Cat. No.
2 x 250 N
5.0 kg
372.51.222
Max. internal cabinet width: 1170 mm
Spring force Weight Cat. No.
2 x 320 N
7.0 kg
372.51.232
Max. internal cabinet width: 1470 mm
Spring force Weight Cat. No.
2 x 380 N
8.5 kg
372.51.242
Material: Steel
Finish: Silver
2 gas loaded springs with force up to 380 N
Panel weight: Max. 8.5 kg
Screw fixing
Max. internal cabinet width: 1170 mm
Spring force Weight Cat. No.
2 x 320 N
7.0 kg
372.51.282
SOFTLIFT
• SOFTLIFT SWING UP FITTINGS
Material: Steel
Finish: Powder coated, silver
Includes front SOFTLIFT hinge, gas struts, mounting
plates, cover plates and installation instructions
Max. 570 mm cabinet width
Height mm Weight kg
Cat. No.
450 - 650 9
372.71.901
550 - 720 9
372.71.902
Max. 870 mm cabinet width
Height mm Weight kg
Cat. No.
450 - 550 9
372.71.911
550 - 720 11
372.71.912
Max. 1170 mm cabinet width
Height mm Weight kg
Cat. No.
450 - 600 11
372.71.921
600 - 720 14
372.71.922
36
www.hafele.com
Max. 1470 mm cabinet width
Height mm Weight kg
Cat. No.
450 - 500 13
372.71.931
500 - 600 13
372.71.932
600 - 720 15
372.71.933
• ADAPTOR BRACKETS
For aluminium framed flaps, 23 and 38 mm
Material: Steel
Finish: Powder coated, silver
Front: 19 mm
Includes fixing materials
Cat. No.
372.71.998
HHC.08
flap fittings & hinges
STABILUS
• STABILUS FURNITURE GAS
SPRINGS
The STABILUS furniture gas springs can be used for kitchen overhead cabinets, office
furniture, blanket chests, toy chests, bench cushions, flaps and lids. In combination with
two conventional cup hinges, the gas springs provide innovative benefits.
Benefits include:
• Automatic force-supported opening at a defined opening speed
• Secure holding in place
• High quality feel
• Easy and soft closing
• Ideal for modular solutions
• Easy mounting
• Compact design takes up minimal space
• Self-explanatory function
• Attractive design
Flap width in mm
600
500
900
1200
Quantity
Force
Quantity
Force
Quantity
Force
Quantity
Force
Quantity
Force
300
2
50N
2
50N
2
50N
2
50N
2
60N
400
2
50N
2
60N
2
60N
2
100N
2
100N
500
2
100N
2
100N
2
100N
2
140N
2
160N
600
2
140N
2
140N
2
160N
2
180N
2
200N
REFRIGERATOR DOOR HINGE
Flap height in mm
450
Material: Steel
Finish: Silver metallic
Includes 1 gas spring lid stay
Newton force
Cat. No.
50 N
372.71.520
60 N
372.71.521
80 N
372.71.522
100 N
372.71.523
120 N
372.71.524
140 N
372.71.525
160 N
372.71.526
180 N
372.71.527
200 N
372.71.528
HHC.08
The desired gas springs with pre-mounted end fittings - can be
selected on the basis of these values.The
values indicated are guideline values only.
We recommend a functional check in the
application itself; this is the only way to
take into consideration such influencing
factors as exact centre of gravity position,
system friction, handles etc. The use of
different panel materials or different
hinges may yield differing results.
• REFRIGERATOR DOOR HINGE
For attaching an appliance to a hinged front panel
Allows you to open the appliance door while the
cabinet door is being opened
Material: Plastic
Colour: Brown
Supplied with 4 fastening screws
Cat. No.
568.16.007
www.hafele.com
37
worktop storage cabinet
• ALUMINIUM ROLLER SHUTTER DOOR AND HOUSING
For installation into pre-made cabinet
Complete with guide rails and box mechanism
Finish: Aluminium anodised
Cabinet width
x height mm
Cat. No.
600 x 1200
900 x 1200
443.47.940
443.47.980
PL
COM
ETE
SET
• GLASS ROLLER SHUTTER DOOR AND MECHANISM
For installation into pre-made cabinet
Complete with guide rails and counter balancing mechanism
Finish: Glass Roller door and aluminium anodised guide rails
Cabinet width
x height mm
Cat. No.
500 x 450 – 1550
600 x 450 – 1550
800 x 450 – 1550
900 x 450 – 1550
443.30.400
443.30.410
443.30.420
443.30.430
NOTE:
When ordering, quote external cabinet height with catalogue number.
Please enquire about manufacturing time.
38
www.hafele.com
HHC.08
pegaso door opening mechanism
The Pegaso door opening
mechanism is suitable for many
types of door applications, where a
hinged door may intrude into an
open space or high traffic areas.
• DOOR OPENING MECHANISM
Finish: Steel, aluminium coloured
Cabinet width Travel
Cat. No.
300 mm
450 mm 407.32.901
400 mm
600 mm 407.32.902
• CONNECTING BAR
Finish: Steel, aluminium coloured
Length: 250 mm
Cat. No.
407.32.910
• CENTRE HINGE
PEGASO
HHC.08
Finish: Steel, aluminium coloured
For greater stability on tall doors
Cat. No.
407.32.930
www.hafele.com
39
Drawer Systems
and Accessories
• STUDIO drawers
• spice racks
• cutlery trays
• anti-slip mats
• internal drawers
• drawer inserts
• drawer fascias
• accessories
40
www.hafele.com
HHC.08
STUDIO drawer system information
STUDIO
TIPMATIC
ESETE
Making something good even better is
a challenge.
With the help of Tipmatic, clean lines set
the trend.
Individualise your STUDIO drawer
systems with accessories.
Häfele presents a double walled drawer system that
offers better solutions.
• Convenient Opening
• Spice Racks
• Optimal Access
• Crockery Dividers
• Even Better Sliding
• Reliable Closing
• Cutlery Inserts
• Even Better Cushioning
• A wide range of Applications
• Anti-slip Mats
• Even Better Stability
• Side Elements
• Even Better Synchronisation
Side Style Options
SIDEWOOD
STUDIO STEEL
Finish Options
SILVER
WHITE
STAINLESS
WOOD
All drawer systems come fully assembled and packed in a carton for convenience!
Drawer sides may be used with either the STUDIO Soft Close Full Extension or Tipmatic push to open self opening system
For additional information on the complete STUDIO drawer range or to request your copy of the ‘STUDIO Drawer Program’ catalogue,
please call 0800 4 HAFELE, or simply visit www.hafele.com.
HHC.08
www.hafele.com
41
sensotronic drawer system
The Grass Sensotronic drawer system from Häfele is intelligent movement design for exclusive comfort. It is the
world’s first intelligent drawer that is electronically controlled over it’s entire length. With European innovation
and technology, drawer pull-outs and interior pull-outs can open and close in response to a gentle tap.
The drawers move loads of up to 70 kg and uniformly open and shut at a set speed.
Intelligent electronic drawers
GRASS Sensotronic Program
For additional information, please call 0800 4 HAFELE, or simply visit www.hafele.com
42
www.hafele.com
HHC.08
grass sensotronic
The beauty of ergonomics
Ergonomics is the trend, just like simple handle-free furniture fronts. Grass Sensotronic supports both of these
trends. Drawers, pull-outs and interior pull-outs open and close in response to a gentle tap, they move different
loads of up to 70 kg, uniformly open and shut at the set speed. And the drawers think with you: they sense
resistance and stop, avoid collisions amongst themselves and protect against injuries.
Intelligence moves, and yet it’s so simple in installation and operation alike.
Sensotronic performance features
• The drawer can be opened by tapping or pulling; a gentle nudge is
sufficient
• The drawer is closed by tapping
• Tapping determines the direction of travel, the drawer automatically
performs the movement - no effort is required (in contrast,
electromechanical soloutions do not have power assisted closure)
• Can be used with or without handle (the drawer reacts in
accordance with the application)
• Blockage recognition over the entire distance - in both directions
• Anti-collision protection (no collision of drawers e.g. in the case of
diagonal corners); drawers can communicate with one another
• Drawer follows a speed profile: Uniform opening and closing speed
irrespective of drawer weight
• Transport-assisted solution (heavy loads are moved by a drive over
the entire distance in both directions)
• Soft stop at end position: When opened, the drawer moves softly
into its end position
• Cushioned closure: Drawer closes softly
• Optimal side stability
• Interior pull-out logic: Interior pull-out stops before reaching the
extended pull-out and can be closed again by tapping the pull-out
• Position initialisation: Depth adjustment for perfectly aligned fronts
Drawers and pull-outs with Grass Sensotronic
open and close electronically. Silent, harmonious, and above all: intelligent.
The intelligence of Grass Sensotronic leads to unique convenient functions such as
end-position dampening, interior drawer logics, or the load-independent travel profile.
The jam protection feature also makes Grass Sensotronic exceptional,
and your furniture more valuable.
Grass Sensotronic prevents possible collisions and damage to the decor.
For additional information, please call 0800 4 HAFELE, or simply visit www.hafele.com
HHC.08
www.hafele.com
43
cuisio drawer accessories
The variable sizes of the cutlery trays demonstrate their ability to suit anyones drawer storage needs.
This product is a great way to make the best use of your kitchen drawers.
1
11
2 2
• CUTLERY TRAY 1
• CUTLERY TRAY 2
• CUTLERY TRAY 3
• CUTLERY TRAY 4
• CUTLERY TRAY 5
Cabinet width: 300 mm
Green translucent 556.90.030
White translucent 556.90.730
Cabinet width: 400 mm
Green translucent 556.90.031
White translucent 556.90.731
Cabinet width: 450 mm
Green translucent 556.90.032
White translucent 556.90.732
Cabinet width: 500 mm
Green translucent 556.90.033
White translucent 556.90.733
Cabinet width: 600 mm
Green translucent 556.90.034
White translucent 556.90.734
2 2 1
2 2 11
2 2 2 2
12 2 2 2
2 2 2 2 2 2
• CUTLERY TRAY 6
• CUTLERY TRAY 7
• CUTLERY TRAY 8
• CUTLERY TRAY 9
• CUTLERY TRAY 10
Cabinet width: 700 mm
Green translucent 556.90.039
White translucent 556.90.739
Cabinet width: 800 mm
Green translucent 556.90.035
White translucent 556.90.735
Cabinet width: 900 mm
Green translucent 556.90.036
White translucent 556.90.736
Cabinet width: 1000 mm
Green translucent 556.90.037
White translucent 556.90.737
Cabinet width: 1200 mm
Green translucent 556.90.038
White translucent 556.90.738
48
44
2
472
• END PIECE
• KNIFE BLOCK
For decorative finish to cutlery tray
Green translucent 556.90.091
White translucent 556.90.791
For 3 knives, suits narrow
compartments
556.90.581
For 4 knives, suits wide
compartments
556.90.582
www.hafele.com
HHC.08
drawer accessories
The high quality combination of timber and plastic makes these drawer inserts very elegant.
Knife blocks, variable dividers and spice jar inserts (with either 6 or 12 compartments)
allow the kitchen user to design the inside of each drawer to suit their needs.
• CUTLERY INSERT
• SPICE JAR INSERT
• SPICE JAR INSERT
Finish: High gloss silver grey plastic
For cabinet width Cat. No.
450 mm
556.53.545
500 mm
556.53.550
600 mm
556.53.560
800 mm
556.53.580
900 mm
556.53.590
1000 mm
556.53.600
6 compartments
Suitable for cabinet width 500 mm+
Finish: Lacquered beech plywood
Cat. No.
556.53.311
12 compartment
Suitable for cabinet width 500 mm+
Finish: Lacquered beech plywood
Cat. No.
556.53.312
• KNIFE BLOCK
• DIVIDER
• SPICE JAR
Suitable for cabinet width 500 mm+
Finish: Lacquered beech plywood
Cat. No.
556.53.310
Suitable for cabinet width 500 mm+
Finish: Lacquered beech plywood
Cat. No.
556.53.319
Finish: Glass, lead crystal clear
Cat. No.
543.95.100
HHC.08
www.hafele.com
45
sorto stainless steel inserts
66
22
• Cab. width 450 mm
46
• Cab. width 600 mm
• Cab. width 600 mm
409
• MAGIC SORTO INSERT
• MAGIC SORTO DIVIDER
Height: 66 mm
Depth: 475 mm
Finish: Stainless steel
For cabinet width Cat. No.
450 mm
559.97.160
600 mm
559.97.165
600 mm
559.97.170
Height: 66 mm
Depth: 475 mm
Finish: Stainless steel
Cat. No.
559.97.912
www.hafele.com
40
HHC.08
cuisio flex drawer inserts
Drawer inserts for organising plates, dishes, pots and pans
and a host of other kitchen items.
• CUISIO DRAWER DIVIDER
Height: 120 mm
Size: 236 wide to 386 wide
adjustable in 25 mm increments
Colour
Set Pack
Green translucent 2 frames
White translucent 2 frames
Green translucent 3 frames
White translucent 3 frames
HHC.08
Cat. No.
556.81.502
556.81.572
556.81.503
556.81.573
www.hafele.com
47
stainless steel & black cutlery trays
Introducing the Esete range of drawer accessories, which provide an exclusive look that is specifically designed to fit the
Studio drawer programme.
Ask your kitchen designer or fabricator about the Studio Drawer Program.
Note: These products are designed to fit 500 mm deep Studio drawers
48
• CUTLERY TRAY
• CUTLERY TRAY
• CUTLERY TRAY WITH KNIFE BLOCK
Material: Stainless steel
For cabinet width Cat. No.
450 mm
559.98.002
Material: Stainless steel
For cabinet width Cat. No.
600 mm
559.98.003
Material: Stainless steel
For cabinet width Cat. No.
600 mm
559.98.015
• CUTLERY TRAY
• CUTLERY TRAY
Material: Stainless steel
For cabinet width Cat. No.
900 mm
559.98.017
Material: Stainless steel
For cabinet width Cat. No.
1200 mm
559.98.019
www.hafele.com
d d i t io n a l
D o n’t f o rg e t a
n p a g e 50!
a cc e s so r ie s o
HHC.08
walnut & stainless steel cutlery trays
Introducing the Esete range of drawer accessories, which provide an exclusive look that is specifically
designed to fit the Studio drawer programme.
Ask your kitchen designer or fabricator about the Studio Drawer Program.
Note: These products are designed to fit 500 mm deep Studio drawers
• CUTLERY TRAY
• CUTLERY TRAY
Material: Walnut and stainless steel
Cabinet width
Cat. No.
450 mm
559.98.022
Material: Walnut and stainless steel
Cabinet width
Cat. No.
900 mm
559.98.035
• CUTLERY TRAY
• CUTLERY TRAY
Material: Walnut and stainless steel
Cabinet width
Cat. No.
600 mm
559.98.037
Material: Walnut and stainless steel
Cabinet width
Cat. No.
1200 mm
559.98.039
HHC.08
d d i t io n a l
D o n’t f o rg e t a
n p a g e 50!
a cc e s so r ie s o
www.hafele.com
49
walnut & stainless steel drawer units
Introducing the Esete range of drawer accessories, which provide an exclusive look that is specifically designed
to fit the Studio drawer programme.
Ask your kitchen designer or fabricator for Studio ...
Note: These products are designed to fit 500 mm deep Studio drawers
• KNIFE BLOCK
Material: Acrylic
Cat. No.
50
559.98.460
• SPICE SET
• SPICE SET
Material: Glass and stainless steel
Includes spice jars with lid
Cat. No.
559.98.040
Material: Glass and stainless steel
Includes 2 jars with lid and 3 jars with shaker
Cat. No.
559.98.041
• PLASTIC CHOPPING BOARD
• WALNUT CHOPPING BOARD
Cat. No.
Cat. No.
559.98.450
www.hafele.com
559.98.850
HHC.08
walnut & stainless steel base plates
Introducing the Esete range of drawer accessories, which provide an exclusive look that is specifically designed
to fit the Studio drawer programme.
Ask your kitchen designer or fabricator for Studio ...
Note: These products are designed to fit 500 mm deep Studio drawers
EXAMPLE • Drawer inserts with Bottle Rack and Cross
1 • DRAWER INSERT WITH BOTTLE RACK
2 • DRAWER UNIT WITH CROSS DIVIDERS
Dividers, order separately. Item 1 & 2
Material: Walnut and stainless steel
Size: W x D x H: 260 x 460 x 140 mm
Cat. No.
559.98.880
Material: Walnut and stainless steel
Size: W x D x H: 260 x 460 x 140 mm
Cat. No.
559.98.882
EXAMPLE • Drawer inserts with Spice Containers
3 • OPEN DRAWER UNIT
4 • DRAWER UNIT WITH SPICE CONTAINERS
and Cross Dividers, order separately. Item 3 & 4
Material: Walnut and stainless steel
Size: W x D x H: 260 x 460 x 140 mm
Cat. No.
559.98.881
Material: Walnut and stainless steel
Size: W x D x H: 260 x 460 x 198 mm
Cat. No.
559.98.883
HHC.08
www.hafele.com
51
walnut & stainless steel base plates
Introducing the Esete range of drawer accessories, which provide an exclusive look that is specifically designed
to fit the Studio drawer programme.
Ask your kitchen designer or fabricator for Studio ...
Note: These products are designed to fit 500 mm deep Studio drawers
52
• BASE PLATE WITHOUT POSTS
• BASE PLATE WITHOUT POSTS
Material: Walnut
Cabinet width
600 mm
900 mm
1200 mm
Material: Stainless steel
Cabinet width
Cat. No.
600 mm
559.98.870
900 mm
559.98.871
1200 mm
559.98.872
Cat. No.
559.98.070
559.98.071
559.98.072
• POST
• POST
• POST
Material: Stainless steel
Height
Cat. No.
210 mm
559.98.077
Material: Stainless steel
Height
Cat. No.
145 mm
559.98.075
Material: Acrylic
Height
160 mm
www.hafele.com
Cat. No.
559.98.476
HHC.08
drawer accessories
The cutlery trays come with a
wide rim and can be cut down
to the exact internal drawer
dimensions, making these inserts
ideal for most drawer sizes in all
kitchens.
• TEXTURED CUTLERY INSERT
• UNIVERSAL CUTLERY TRAY
• SPICE DRAWER INSERTS
Material thickness: 3 mm
Height: 57 mm
Finish: Textured white plastic
For cabinet width Cat. No.
300 mm
556.62.756
350 mm
556.62.765
400 mm
556.62.774
450 mm
556.62.783
500 mm
556.62.792
550 mm
556.62.809
600 mm
556.62.818
Material thickness: 2 mm
Height: 54 mm
Finish: Gloss white plastic
To suit cabinet width 350-450 mm
Cat. No.
556.51.761
Material thickness: 2.5 mm
Height: 50 mm
Finish: Textured silver plastic
For cabinet width Cat. No.
400 mm
556.63.552
450 mm
556.63.553
500 mm
556.63.554
600 mm
556.63.556
800 mm
556.63.558
1200 mm
556.63.560
• UNIVERSAL CUTLERY INSERT
• SPICE DRAWER INSERT
• ANTI-SLIP DRAWER MAT
Height: 57 mm
Material thickness: 2 mm
Finish: Textured white plastic
For cabinet width Cat. No.
400 - 450 mm
556.89.781
500 - 600 mm
556.89.782
A minimum inside drawer height of 83 mm
is required
Size: 1300 x 550 mm
Material thickness: 3 mm
Finish: Glossy white plastic
Cat. No.
556.79.706
Roll size: 1550 mm long x 500 mm wide
Colour
Cat. No.
White
547.90.790
Silver
547.90.990
HHC.08
www.hafele.com
53
riverso drawer system
The drawer system can be
opened from either side and
has a front panel, which when
opened, keeps the opposite
side closed.
The smooth action and great
stability of the full extension are
hallmarks of the Riverso.
The system comes with a built
in Soft Stopp dampener so
there will never be any
slamming of the drawers.
RIVERSO
• RIVERSO DRAWER FITTING
For double sided drawers
Full extension
Integrated Soft Stopp dampening system
Load capacity: 25 kg
Colour: Silver
Depth
Cat. No.
400-479 mm
432.19.940
480-559 mm
432.19.948
560-639 mm
432.19.956
640-719 mm
432.19.964
720-799 mm
432.19.972
54
www.hafele.com
HHC.08
glass holders
Keep glasses dust-free and neatly
hung on display, or hidden in a
cupboard for easy storage with glass
holders.
• GLASS HOLDER, STANDARD
Holds 12 glasses, 3 rows x 4 glasses each
Material: Steel
Finish: Plated or powder coated
Finish
Cat. No.
Chrome polished
544.09.200
Chrome matt
544.09.400
Brass polished
544.09.800
Black gloss
544.09.300
Allow minimum 75 mm spacing between installed
glass holders for hanging glasses.
• GLASS HOLDER, JUMBO
Holds 18 glasses, 3 rows x 6 glasses each
Material: Steel
Finish: Plated or powder coated
Finish
Cat. No.
Chrome polished
544.09.210
Chrome matt
544.09.410
Allow minimum 75 mm spacing between installed
glass holders for hanging glasses.
• GLASS HOLDER
Suitable for bar areas
For screw fixing beneath shelf
Material: Brass
Finish: Polished Brass
Width x Depth
Cat. No.
100 x 300 mm
812.09.814
Finish: Chrome-plated polished
Width x Depth
Cat. No.
100 x 300 mm
812.09.216
HHC.08
in e b o t tl e
Don’t fo rg et w
is h of f y ou r
h ol de rs to fi n
b a r a re a , on p
a ge 29
www.hafele.com
55
ynotloc cupboard & drawer locking system
Automatically lock all the cupboards and drawers
in the hazardous areas of your home with
YNOTLOC.
Open them all at once with the flick of the master
switch or choose individual locks for one-off
access using the magnetic wand.
It’s possible with child-safe YNOTLOC.
YNOTLOC
56
• 2 LOCK STARTER PACK
• 4 LOCK PACK
• MASTER SWITCH PACK
Pack includes: 2 complete locks, 1 wand with
magnet, 1 plug pack, 1 jumper wire, 2 magnetic
sensors with wires, 2 installation tools
and fixing materials
Cat. No.
238.40.001
Pack includes: 4 complete locks, 4 jumper wires, 4
magnetic sensors with wires, 4 installation tools
and fixing materials
Cat. No.
238.40.010
Pack includes: Push button unit with printed circuit
board, 1 jumper wire 4 metres long, 1 battery
and fixing materials
Cat. No.
238.40.090
www.hafele.com
HHC.08
glass splashbacks
Introduce a splash of colour to
enhance any space. Whether kitchen,
laundry or bathroom our pre-prepared and
ready to install splashbacks offer a durable
and stylish surface.
Techn
o
Black
Tranquil
Available in a range of designer colours and sizes; pre-cut splashbacks
offer immediate installation without the need for lengthy templating.
Black
Height x Width
750 x 600 mm
750 x 900 mm
750 x 1000 mm
750 x 1200 mm
Cat. No.
564.87.030
564.87.031
564.87.032
564.87.033
Napa
Height x Width
750 x 600 mm
750 x 900 mm
750 x 1000 mm
750 x 1200 mm
Cat. No.
564.87.140
564.87.141
564.87.142
564.87.143
Tranquil
Height x Width
750 x 600 mm
750 x 900 mm
750 x 1000 mm
750 x 1200 mm
Cat. No.
564.87.080
564.87.081
564.87.082
564.87.083
Dynamite
Height x Width
750 x 600 mm
750 x 900 mm
750 x 1000 mm
750 x 1200 mm
Cat. No.
564.87.090
564.87.091
564.87.092
564.87.093
Vapour
Height x Width
750 x 600 mm
750 x 900 mm
750 x 1000 mm
750 x 1200 mm
Cat. No.
564.87.040
564.87.041
564.87.042
564.87.043
Wasabi
Height x Width
750 x 600 mm
750 x 900 mm
750 x 1000 mm
750 x 1200 mm
Cat. No.
564.87.000
564.87.001
564.87.002
564.87.003
Techno
Height x Width
750 x 600 mm
750 x 900 mm
750 x 1000 mm
750 x 1200 mm
Cat. No.
564.87.050
564.87.051
564.87.052
564.87.053
Can be used for various applications
Stylish and Affordable
Hygienic
Easy to clean
A variety of fashionable colours
Toughened Safety Glass in clear float
Full instructional information supplied
Wasabi
Vapour
HHC.08
Dynamite
Napa
www.hafele.com
57
Sinks, Taps and
Accessories
• blanco sinks
58
www.hafele.com
• designer tapware
• accessories
HHC.08
zeroxline under mount sinks & accessories
BLANCO
Blanco undermount sinks are ideal for use in combination with granite, reconstituted stone or
fabricated benchtops.
• BLANCOZEROX 700U
• BLANCOZEROX 500U
• BLANCOZEROX 450U
Includes designer pop-up waste and overflow
(14 mm Ø drill hole required)
Finish: Stainless steel
Dimensions: 700 x 400 mm
Bowl depth: 175 mm
Cat. No.
565.67.220
Includes designer pop-up waste and overflow
(14 mm Ø drill hole required)
Finish: Stainless steel
Dimensions: 500 x 400 mm
Bowl depth: 175 mm
Cat. No.
565.67.090
Includes designer pop-up waste and overflow
(14 mm Ø drill hole required)
Finish: Stainless steel
Dimensions: 450 x 400 mm
Bowl depth: 175 mm
Cat. No.
565.67.080
• BLANCOZEROX 400U
• BLANCOZEROX 180U
• BLANCOAXIS 180U
Includes designer pop-up waste and overflow
(14 mm Ø drill hole required)
Finish: Stainless steel
Dimensions: 400 x 400 mm
Bowl depth: 175 mm
Cat. No.
565.67.070
Includes designer waste
Finish: Stainless steel
Dimensions: 180 x 400 mm
Bowl depth: 175 mm
Cat. No.
565.67.100
Includes 1½" designer waste
(non close for draining)
Finish: Stainless steel
Dimensions: 550 x 400 x 18 mm
Bowl depth: 18 mm
Cat. No.
565.67.110
HHC.08
www.hafele.com
59
zeroxline under mount sinks & accessories
• BLANCOZEROX 340-180U
Includes designer pop-up waste
(14 mm Ø drill hole required)
Finish: Stainless steel
Dimensions: 545 x 400 mm
Bowl depth: 175 mm
Bowl left orientation
Cat. No.
565.67.231
Bowl right orientation
Cat. No.
565.67.232
60
• BLANCOZEROX 400-400U
• BLANCOZEROX 400-500T-U
Includes designer pop-up waste
(14 mm Ø drill hole required)
Finish: Stainless steel
Dimensions: 825 x 410 mm
Bowl depth: 175 mm
Cat. No.
565.67.170
Includes designer pop-up waste
(14 mm Ø drill hole required)
Finish: Stainless steel
Dimensions: 975 x 400 mm
Bowl depth: 175 / 18 mm
Bowl left orientation
Cat. No.
565.67.242
Bowl right orientation
Cat. No.
565.67.241
• COLANDER
• DRAINER
• GLASS CUTTING BOARD
• GLASS CUTTING BOARD
• GLASS CUTTING BOARD
Fits all ZEROXLINE main and
additional bowls
Finish: Stainless steel
Dimensions: 200 x 440 x 100 mm
Cat. No.
565.69.062
Fits all ZEROXLINE main and
additional bowls
Finish: Stainless steel
Dimensions: 240 x 440 x 32 mm
Cat. No.
565.69.208
Free standing
Heat resistant safety glass
Dimensions: 340 x 466 mm
Cat. No.
565.69.020
Two-tiered: Fits on top of zeroxline
colander (slides over cut-out)
Heat resistant safety glass
Dimensions: 240 x 440 mm
Cat. No.
565.69.922
Two-tiered: Fits on top of zeroxline
colander (slides over cut-out)
Heat resistant safety glass
Dimensions: 200 x 440 mm
Two tiered: fits onto colander
(565.69.062)
Cat. No.
565.69.921
www.hafele.com
HHC.08
designer under mount sinks & accessories
• BLANCORONDO
• BLANCOYPSILION 550U
Includes designer waste
Finish: Stainless steel
Dimensions: 385 mm Ø
Bowl depth: 165 mm
Cat. No.
565.67.050
Includes designer wastes
Finish: Stainless steel
Dimensions: 550 x 420 mm
Bowl depth: 175 and 130 mm
Cat. No.
565.65.190
• BLANCOSUPRA 500U
• BLANCOSUPRA 550T
Includes designer waste
Finish: Stainless steel
Dimensions: 500 x 400 mm
Bowl depth: 175 mm
Cat. No.
565.69.002
Includes 1½¨ designer waste
(non close for draining)
Finish: Stainless steel
Dimensions: 550 x 400 mm
Bowl depth: 18 mm
* Suits BLANCOSUPRA 500U
Cat. No.
565.69.000
• BLANCO JOTA 180U
• BLANCOAXIS 180U
Includes designer waste and colander
Finish: Stainless steel
Dimensions: 180 x 290 mm
Bowl depth: 130 mm
Cat. No.
565.67.040
Includes designer waste and colander
Finish: Stainless steel
Dimensions: 180 x 340 mm
Bowl depth: 180 mm
Cat. No.
565.67.060
HHC.08
www.hafele.com
61
premium surface-mount sinks & accessories
62
• BLANCOPLUS 45 S
• BLANCOPLUS 6 S
Includes designer waste
Finish: Stainless steel brushed
Dimensions: cabinet 450 mm
Bowl depth: 160 mm
Bowl reversible
Cat. No.
565.65.020
Includes designer wastes
Finish: Stainless steel brushed
Dimensions: cabinet 600 mm
Bowl depth: 160 and 130 mm
Bowl reversible
Cat. No.
565.65.010
• BLANCOPLUS 8 S
• BLANCOCLASSIMA 6 S
Includes designer wastes
Finish: Stainless steel brushed
Dimensions: cabinet 800 mm
Bowl depth: 160 mm
Bowl reversible
Cat. No.
565.65.000
Includes designer wastes
Main bowl with pop-up waste
Finish: Stainless steel
Dimensions: cabinet 600 mm
Bowl depth: 160 and 130 mm
Bowl reversible
Cat. No.
565.65.180
• BLANCOCLASSIC 8
• CHOPPING BOARD
• CHOPPING BOARD
Includes designer wastes
Finish: Stainless steel
Dimensions: cabinet 800 mm
Bowl depth: 175 mm
Cat. No.
565.66.020
Includes 100 ml bottle of anti-bacterial oil
Finish: Beech
Cat. No.
565.69.053
* Suits sinks 565.65.020 & 565.65.000
Includes 100 ml bottle of anti-bacterial oil
Finish: Beech
Cat. No.
565.69.054
* Suits sink 565.65.010
www.hafele.com
HHC.08
kitchen tapware
Blanco designer tapware follows the tradition of
functionality and attractiveness.
Minimalism is the key with the eye catching
BLANCOZIROS high arc, making it possible to easily
fill large pots and vases.The BLANCORADOS
extendible spray guarantees more convenience
when filling pots and vases outside the bowl or even
when cleaning the sink centre.
Please note: all taps for use with high-pressure
water cylinders only
•BLANCOPROFI
SPRAY HEAD
•BLANCOPODOS
Finish: Polished chrome
Cat. No.
565.68.209
Finish: Polished chrome
Cat. No.
565.68.214
•BLANCOELIPSO
•BLANCOELIPSO
PULL OUT SPRAY HEAD
•BLANCORADOS
•BLANCORADOS S
PULL OUT SPRAY HEAD
Finish: Polished chrome
Cat. No.
565.68.204
Finish: Polished chrome
Cat. No.
565.68.205
Finish: Polished chrome
Cat. No.
565.68.206
185 mm spout
Finish: Polished chrome
Cat. No.
565.68.207
• BLANCOMASTER CONTROL
• BLANCOMASTER S DUO
SPRAY HEAD
• BLANCOZIROS
•BLANCONAVA
Finish: Polished chrome
Cat. No.
565.68.213
Finish: Polished chrome
Cat. No.
565.68.212
Finish: Polished chrome
Cat. No.
565.68.215
Finish: Polished chrome
Cat. No.
565.68.216
HHC.08
www.hafele.com
63
linero railing systems
LINERO
• PROFILE STRIP
• SPICE RACK
Finish: Nickel-plated matt steel
Size
Cat No.
600 mm
521.60.606
900 mm
521.60.609
1200 mm
521.60.612
1500 mm
521.60.615
Finish: Nickel-plated matt steel
Cat. No.
521.61.625
• KITCHEN ROLL HOLDER
• SHELF
3 level tear off unit for aluminium foil,
cling wrap and paper towel rolls
Size (W x D x H): 352 x 150 x 305 mm
Cat. No.
521.61.610
Supporting elements: Nickel-plated matt steel
Shelf element: Stainless steel
Size (W x D x H): 440 x 150 x 275 mm
Cat. No.
521.61.620
• WRITING SET HOLDER
Includes note pad and biro
Supporting elements: Nickel-plated matt steel
Plate: Stainless steel
Cat. No.
521.61.638
64
www.hafele.com
HHC.08
linero railing systems
HHC.08
• COOK BOOK SHELF
• PLATE HOLDER
Supporting elements: Nickel-plated matt steel
Size (W x D x H): 440 x 47 x 320 mm
Shelf element: Stainless steel
Cat. No.
521.61.627
Finish: Nickel-plated matt steel
Cat. No.
521.61.632
• UTENSIL HOLDER
• HOOK RAIL
Includes 1 Stainless steel container
Size (W x D x H): 147 x 150 x 335 mm
Supporting elements: Nickel-plated matt steel
Cat. No.
521.61.635
Contains 6 hooks
Size: 380 mm
Finish: Nickel-plated matt steel
Cat. No.
521.61.600
• KNIFE BLOCK
• KNIFE PLATE
Solid beech wood block for 8 knives
Size (W x D x H): 380 x 80 x 370 mm
Supporting elements: Nickel-plated matt steel with
perspex cover
Cat. No.
521.61.633
Stainless steel knife plate
Size (W x D x H): 380 x 80 x 370 mm
Supporting elements: Nickel-plated matt steel
Cat. No.
521.61.634
• TOWEL RAIL
• PAPER TOWEL HOLDER
Finish: Nickel-plated matt steel
Size: 570 mm
Cat. No.
521.61.601
Paper towel holder
Size (W x D x H): 352 x 150 x 255 mm
Cat. No.
521.61.611
www.hafele.com
65
quadra gas cooktop & kitchen scales
Our kitchen scale options fulfill
high quality and precision
standards expected from any
kitchen user.
• GAS COOK TOP
• GAS COOKER TOP
Includes four burner and enamelled cast iron grids.
Burner rings and electronic under-knob ignition
Finish: Stainless steel
Cat. No.
536.00.909
Cut-out size (W x D x H) 1162 x 351 x 70 mm
Includes four burner and enamelled cast iron grids.
Burner rings and electronic under-knob ignition
Finish: Stainless steel
Cat. No.
535.08.507
Cut-out size (W x D x H) 908 x 351 x 70 mm
• KITCHEN SCALES
To set on sides of kitchen drawers, removable
Includes hold function, weight, on/off switch on back
Size (W x D x H): 235/475 x 232 x 40 mm
Power: 4 x AA batteries included
Material: Aluminium and plastic
Finish: Silver colour and anthracite
Cat. No.
300-400 mm
530.00.900
400-500 mm
530.00.902
66
www.hafele.com
HHC.08
powered tool bar
The vertical powerdock is recessed, so it can sit flush with the desktop when not in use, and brought up
when needed.
• POWERDOCK VERTICAL 10 AMP
Concealed power with pre-fitted 2 metre lead,
10 amp and 3 pin plug
Finish: Silver 2 x GPO
Cat. No.
822.74.904
Finish: Champagne 2 x GPO
Cat. No.
822.74.405
HHC.08
www.hafele.com
67
cable management fittings
Length
210
75
• WIRE DOUBLE TIER CABLE CHANNEL
Material: Steel wire, powder-coated black
Length
Cat No.
650 mm
631.14.911
950 mm
631.14.912
1250 mm
631.14.913
1550 mm
631.14.914
Self-taping
thread
Ø6
18
9
28
66
33
57
• CABLE HOOK
Provides simple yet functional cable management.
Self-tapping wood thread for Ø5 mm holes
Material: Re-inforced nylon, black
Cat. No.
631.02.300
68
www.hafele.com
HHC.08
Waste
Management
• bins for fixed fronts
HHC.08
• bins for hinged doors
• built-in waste bins
• step stools
www.hafelehome.com.au
69
one2five waste bin system
The One2Five Waste Bins can be combined
with and fitted into the STUDIO drawer
systems shown on page 41 to create the
configurations shown here.
Now enjoy the beautiful STUDIO drawer
soft-close action throughout your kitchen
300 width
500 depth
400 width
500 depth
8 litres
8 litres
17/26/32
litres
8 litres
450 width
500 depth
500 width
500 depth
2 x 8 litres
or
1 x 17/26/32
litres
2 x 8 litres
or
1 x 17/26/32
litres
2 x 8 litres
or
1 x 17/26/32
litres
2 x 8 litres
or
1 x 17/26/32
litres
Cabinet width
Min. 15
32
38.6
63.6
7
*
70
www.hafele.com
8 litres
8 litres
17/26/32
litres
17/26/32
litres
• FLEXIBLE HANGING FRAMES
15.5
16
600 width
500 depth
For hanging waste bin pails in STUDIO drawers
Cabinet thickness: 16 or 18 mm upon request
Cabinet. width
Cat. No.
300 mm
502.90.781
400 mm
502.90.783
450 mm
502.90.784
500 mm
502.90.785
600 mm
502.90.787
•
•
•
•
Three dimensionally adjustable front support angle
Same height drawer, hanging frame and bins
Waste bags strongly fixed by carrying handles
Additional drawer front fixing and adjustable bracket
5
16
HHC.08
one2five waste bin system
Width
Depth
Height
The One2Five Waste Bins can be combined with and fitted into
the STUDIO drawer systems shown on page 41 to create the
configurations shown here.
Now enjoy the beautiful STUDIO drawer soft-close action throughout your kitchen
• WASTE BIN PAILS
Finish: Plastic, grey
Capacity: 8, 17, 26 and 32 litre
For use with bin frames. Bending handles to hold
wastebags
Capacity
Cat. No.
8 litre
502.90.501
17 litre
502.90.502
26 litre
502.90.503
32 litre
502.90.504
• LID COVER PLATES
• INDIVIDUAL BIN LID
• LID COVER PLATE SUSPENSION RAILS
Finish: Plastic, grey
For use with one2five waste bin system
Cabinet. width
Cat. No.
300 mm
502.90.641
400 mm
502.90.643
450 mm
502.90.644
500 mm
502.90.645
600 mm
502.90.647
Finish: Plastic, grey
For use with bin containers
Capacity: 8 litre
Cat. No.
502.90.506
Capacity: 7, 26, 32 litre
Cat. No.
502.90.507
Finish: Plastic, grey
For use with lid cover plates
Cat. No.
502.90.690
HHC.08
www.hafele.com
71
waste bins for fixed fronts
By using a system
that caters for
rubbish, recycling
and Bio waste, you
are helping keep
your kitchen clean
and waste out
of sight!
72
• SINGLE WASTE BIN
• DOUBLE WASTE BIN
Includes 1 x 20 litre bin
Base mounted for cabinet width 300 mm
Size (W x D x H): 242 x 400 x 420 mm
Cat. No.
502.44.703
Includes 2 x 15 litre bins
Base mounted for cabinet width 300 mm
Size (W x D x H): 244 x 477 x 433 mm
Cat. No.
502.72.761
• DOUBLE WASTE BIN
• DOOR OPENER
Includes 2 x 15 litre bins
Top or base mounted for cabinet width 350 mm internal
Finish: White
Size (W x D x H): 350 x 525 x 355 mm
Cat. No.
502.99.710
For fixed front waste bins
Finish: Aluminium matt pedal with
black counterplate
Cat. No.
502.15.200
For hinged front waste bins
Cat. No.
502.15.042
Additional opening tension for 502.15.042 if required
Cat. No.
502.15.033
www.hafele.com
HHC.08
waste bins for fixed fronts
• EURO CARGO 45
SOFT CONTROL CLOSE
• EURO CARGO 30
SOFT CONTROL CLOSE
Includes 2 x 35 litre waste bins
Suitable for cabinet size 450 mm
Size (W x D x H): 418 x 528 x 546 mm
Cat. No.
502.73.922
Includes 1 x 30 litre waste bin
Suitable for cabinet size 300 mm
Size (W x D x H): 268 x 403 x 427 mm
Cat. No.
502.73.940
• EURO CARGO 60
SOFT CONTROL CLOSE
Includes 2 x 35 litre and 2 x 8.5 litre bins
Suitable for cabinet size: 600 mm
Size (W x D x H): 568 x 528 x 546 mm
Cat. No.
502.73.945
HHC.08
• CARGO 45
• CARGO 60
Includes 1 x 12 litre, 2 x 8.5 litre and cleaner baskets
Suitable for cabinet size: 450 mm
Size (W x D x H): 418 x 430 x 320 mm
Cat. No.
502.70.241
Includes 1 x 18 litre, 2 x 8.5 litre and cleaner baskets
Suitable for cabinet size: 600 mm
Size (W x D x H): 568 x 430 x 420 mm
Cat. No.
502.70.242
www.hafele.com
73
waste bins for behind hinged doors
Keeping rubbish out of sight and
out of mind!
74
• SINGLE WASTE BIN
• SLIDE-OUT WASTE BIN
• FOLLOWER
Includes 1 x 19 litre bin
For cabinet size 450 mm
Size (W x D x H): 410 x 210 x 470 mm
Finish: White
Cat. No.
502.00.407
Includes 1 x 20 litre bin
For cabinet size: 300 mm
Size (W x D x H): 242 x 420 x 380 mm
Finish: White
Cat. No.
502.43.706
To use with slide-out waste bin (502.43.706)
Minimum cabinet width: 400 mm
Allows bin to slide out on opening of door
Cat. No.
502.43.797
• UNDERSINK WASTE BIN
• DOUBLE WASTE BIN
• TRIPLE WASTE BIN
Includes 1 x 12 litre and 1 x 18 litre bin
Suitable for cabinet size: 500 mm
Size (W x D x H): 425 x 320 x 341 mm
Cat. No.
502.70.211
Includes 2 x 15 litre bins
Suitable for cabinet size: 300 mm
Size (W x D x H): 248 x 479 x 407 mm
Cat. No.
502.70.252
1 x 15 litre and 2 x 7 litre bins
Suitable for cabinet size: 300 mm
Size (W x D x H): 248 x 479 x 407 mm
Cat. No.
502.70.253
www.hafele.com
HHC.08
waste bins for behind hinged doors
• SINGLE WASTE BIN
• DOUBLE WASTE BIN
• TRIPLE WASTE BIN
Includes 1 x 40 litre bin
For cabinet size: 400 mm
Size (W x D x H): 319 x 465 x 542 mm
Cat. No.
502.70.520
Includes 2 x 18 litre bins
For cabinet size: 400 mm
Size (W x D x H): 346 x 471 x 320 mm
Cat. No.
502.70.220
Includes 1 x 18 litre and 2 x 8.5 litre bins
For cabinet size: 400 mm
Size (W x H x D): 346 x 471 x 320 mm
Cat. No.
502.70.233
• DOUBLE WASTE BIN
• DOUBLE WASTE BIN
Includes 2 x 15 litre bins
For cabinet size: 300 mm
Size (W x D x H): 248 x 479 x 407 mm
Cat. No.
502.70.710
Includes 2 x 15 litre bins
For cabinet size: 350 mm internal
Size (W x D x H): 350 x 525 x 340 mm
Cat. No.
502.99.700
HHC.08
www.hafele.com
75
waste bins & accessories
• 20 LITRE WASTE BIN
• 15 LITRE WASTE BIN
1 x 20 litre bin
For cabinet size: 400 mm
Size (W x D x H): 365 x 305 x 680 mm
Finish
Cat. No.
White
502.23.740
Stainless steel
502.23.062
1 x 15 litre bin
Suitable for 400 mm cabinet
Size (W x D x H): 355 x 305 x 385 mm
Finish: White powder coated steel or stainless steel
housing, light grey plastic pail and white plastic lid
Bin finish
Cat. No.
White
502.12.729
Stainless steel
502.12.023
• 11 LITRE WASTE BIN
• WASTE BIN
1 x 11 litre bin
For cabinet size : 400 mm
Size (W x D x H): 345 x 255 x 545 mm
Finish: White plastic with white steel bracket
Cat. No.
500.07.746
1 x 10 litre bin
For cabinet size: 400 mm
Size (W x D x H): 365 x 305 x 420 mm
Finish
Cat. No.
White
502.16.709
Stainless steel
502.16.003
• 5 LITRE WASTE BIN
1 x 5 litre bin
For cabinet size: 300 mm
Size (W x D x H): 175 x 175 x 310 mm
Finish: White plastic
Cat. No.
502.63.726
76
www.hafele.com
• WORKTOP WASTE BIN
• DUSTPAN AND BRUSH HOLDER
For recess and surface mounting
Includes 1 x 11 litre bin, Size: Ø310 x 300 mm
Finish: Black plastic bin, stainless steel lid
Cat. No.
502.94.000
Left or right hand installation
Finish: Chrome-plated
Cat. No.
502.27.211
HHC.08
step stools & ladders
• STEP STOOL
• FOLDING STEPS
Finish: White powder coated steel and
grey plastic caps on all contact points
Cat. No.
505.07.702
With 200 x 300 mm steps and non-slip
rubber tread
Finish: White powder coated steel and
grey plastic caps on all contact points
Colour
Cat. No.
White
505.04.704
Accessories
HHC.08
• FOLDING BRACKET
• HANGING BRACKET
For attaching to folding steps (505.04.704 as above only)
For mounting to a removable kickboard
Finish: Bright galvanised steel
Cat. No.
505.04.419
For screw mounting inside a cabinet.
For storage of folding steps (505.04.704 as above only)
Size (W x D x H): 140 x 30 x 30 mm
Finish: White powder coated steel
Cat. No.
505.04.722
www.hafele.com
77
Laundry
• laundry baskets
and fittings
78
www.hafele.com
• wall mounted
ironing board
Accessories
• built-in ironing board
• hanging laundry
accessories
HHC.08
laundr y baskets & fittings
A range of storage baskets is available for all your storage needs.
• LAUNDRY BASKET
• FLAP-EX FLAP FITTING
• MOUNTING RAIL
With lowered handles for hooking onto mounting rail
Finish: Chrome-plated steel
For cabinet width 350 mm
Capacity: 29 litre
Width: 285 mm
Depth: 260 mm
Height: rear 365 mm, front 420 mm
Cat. No.
540.02.202
For cabinet width 450 mm
Capacity: 39 litre
Width: 385 mm
Depth: 260 mm
Height: rear 365 mm, front 420 mm
Cat. No.
540.02.204
For controlling opening of the door front
Consisting of 1 angled foot, round rod with plastic sleeve,
2 nickel-plated chrome spiral springs and 1 white plastic
screw mounted support
Cat. No.
365.52.708
For fixing laundry basket with screw mounting to door front
Width: 214 mm
Hole distance: 160 mm
Finish: Chrome-plated steel
Cat. No.
540.02.194
HHC.08
www.hafele.com
79
synergy collection - accessories
PULL-OUT HAMPER
• PULL-OUT LAUNDRY HAMPER
With full extension slide and removable bags
Built-in handles make it easy to remove the bags
Depth: 355 mm
Height: 530 mm from top of the frame to bottom of
the bag (when bags are loaded, the height will be
greater than specified)
Width: 457 mm, 1 bag
Finish
Cat. No.
Aluminium, satin
807.52.931
Width: 610 mm, 2 bags
Finish
Cat. No.
Aluminium, satin
807.52.933
Width: 762 mm, 2 bags
Finish
Cat. No.
Aluminium, satin
807.52.935
• TILT-OUT LAUNDRY HAMPER
With removable bags
Frame screw mounts to the back of the tilt-out door
Depth: 345 mm
Height: 600 mm from top of the frame to the
bottom of the bag (when bags are loaded, the
height will be greater than specified)
Material: Powder coated steel frame, nylon bag
Width: 412 mm, 1 bag
Finish
Cat. No.
Black
547.43.301
Width: 565 mm, 2 bags
Finish
Cat. No.
Black
547.43.303
Width: 714 mm, 2 bags
Finish
Cat. No.
Black
547.43.305
TILT-OUT HAMPER
80
www.hafele.com
HHC.08
ironfix - ironing boards
The IRONFIX wall mounted ironing boards are
pre-assembled and easy to mount. Equipped with an
easy turning mechanism and lock. The ironing board can
be effortlessly turned 90º to the left, right or inclined
and secured.
IRONFIX built-in ironing boards are an excellent space
saving solution in your kitchen or laundry.
The entire ironing board is built into the drawer and
can be accessed by simply pulling the drawer open
and unfolding the board. With spare parts available,
you can ensure this ironing board will last you a lifetime.
Wall Mounted
• WALL MOUNTED IRONING BOARD
Complete set includes assembly material
Finish: White powder coated steel with striped
fabric ironing board cover
Dimensions (W x H): 365 x 595 mm
Board length: 950 mm when opened
With plastic cover
Cat. No.
568.66.710
Drawer Mounted
• DRAWER MOUNTED
IRONING BOARD
Complete set includes 2 carcase rails,
1 collapsible ironing board support system with
pre-assembled 2-part extending runners and
folding ironing board
Features: Variable width adjustment for built-in
widths between 362 and 500 mm, automatic
extending support when drawer is opened
Board length: 950 mm when opened
Finish: White powder coated steel and striped
fabric ironing board cover
Cat. No
568.60.710
Lateral
• LATERAL IRONING BOARD
Complete set includes ironing board, assembly
material and installation instructions
Finish: White powder coated steel with grey striped
fabric ironing board cover
Dimensions (W x D x H): 520 x 350 x 125 mm
Board length: 950 mm when opened
Cat. No.
568.60.780
Accessories
• IRONING BOARD COVER
• SLEEVE IRONING BOARD ARM
• SHIRT SLEEVE IRONING BOARD COVER
For IRONFIX ironing boards
Material: Natural white cotton with grey stripes
Foam backing
With rubber clamping and elastic tensioning cord
Cat. No.
568.60.907
Smaller ironing board for ironing shirt sleeves
and smaller garments. For hanging onto the
mounting bracket on IRONFIX ironing boards
Material: Natural white cotton with grey stripes
Foam backing
Cat. No.
568.61.700
For IRONFIX sleeve ironing board arm
Material: Natural white cotton with grey stripes
Foam backing
With rubber clamping and elastic tensioning cord
Cat. No.
568.60.916
HHC.08
www.hafele.com
81
Living and Bedroom
Fittings
• shelving systems
• pull-out storage system
• wardrobe hooks and hangers
• wardrobe accessories
• built-in bed
• storage accessories
82
www.hafele.com
HHC.08
wardrobe shelving system
2
17
7
8
1
16
9
10
15
14
6
12
4
13
5
The LOGO wardrobe shelving system has
the ability to suit anyones needs.
It also functions as a moveable storage
area or room divider. Variable uses are
available with different brackets and
adaptors, and simple mounting and
installation make the system ideal.
Many different looks are also possible
by interchanging profile types and
with the use of different materials,
such as aluminium, timber or glass.
11
1 • PROFILE COLUMN
6 • SHELF BRACKET
Length: 3000 mm
Height adjustable, cut to size
Finish: Silver coloured aluminium
Cat. No.
814.00.930
Includes fixing materials
For aluminium, aluminium-glass, and
aluminium-timber shelves
Finish: Silver coloured zinc diecast
Shelf depth
Cat. No.
180 mm
814.01.931
340 mm
814.01.932
500 mm
814.01.933
2 • CORNER CONNECTOR
To connect the profile
Includes fixing materials
Finish: Silver coloured aluminium
Cat. No.
814.01.920
3 • CEILING OR WALL FASTENER
Finish: Silver coloured zinc diecast
Cat. No.
814.01.900
4 • ADJUSTABLE FOOT
Includes fixing material
Adjustable up to 30 mm
Finish: Silver coloured zinc diecast
Cat. No.
814.01.910
7 • BRACKET
For timber shelves and carcases or
glass shelves
Includes fixing materials
Finish: Silver coloured zinc diecast
Cat. No.
814.01.930
8 • SHELF SUPPORT
For fixing to profile
Use with above bracket 7 as a clamp
Finish: Silver coloured zinc diecast
Cat. No.
814.01.980
5 • PLATE FOR ADJUSTABLE FOOT
Includes fixing material and rubber adhesive
Finish: Silver coloured zinc diecast
Cat. No.
814.01.911
HHC.08
9 • CARCASE BRACKET
For fixing to profile
Use with shelf bracket 7 as a clamp
Finish: Silver coloured zinc diecast
Cat. No.
814.01.940
www.hafele.com
83
wardrobe shelving system
10 • ADAPTOR
14 • ADAPTOR
To use with 14 and 15 ,
tie, belt, trouser and skirt holders
Fixes into profile
Finish: Silver coloured aluminium
Cat. No.
814.01.960
For wardrobe lift on page 91
Finish: Silver coloured aluminium
Cat. No.
814.01.970
11 • END PROFILE WITH LIP
With groove for shoe racks
Length: 928 mm
Finish: Silver coloured aluminium
With lip
Cat. No.
814.02.920
Without lip
Cat. No.
814.02.900
15 • WARDROBE HANGING
RAIL BRACKET
For fixing into profile and connection of wardrobe rail
on page 89
Finish: Silver coloured zinc diecast
Cat. No.
814.01.950
12 • END PROFILES
A
B
Length: 928 mm
Finish: Silver coloured aluminium
With groove and no clip A
Cat. No.
814.02.910
For glass and timber inserts B
Cat. No.
814.02.940
13 • MID-PROFILE
With groove and clip for connection to 11 and
12 A and 12 B
Length: 928 mm
Finish: Silver coloured aluminium
300 mm
814.02.930
84
www.hafele.com
r
t , Tr o u s e
Fo r S k i r
o ld e r s ,
a n d T ie h
8
s 86 t o 8
se e p age
HHC.08
pull-out storage system
16
11
12
10
8
15
1
3
6
1 • PULL-OUT WARDROBE FRAME
5 • BASKET LINER - QUILTED MAT
Adjustable with full extension ball bearing runners
Side fixing, for shelf mounting order 2
For use with 3 4 and 6
Finish: Silver aluminium
Installed width
Cat. No.
410/550 mm
805.85.221
550/690 mm
805.85.222
690/830 mm
805.85.223
830/1000 mm
805.85.224
970/1100 mm
805.85.225
For use with wire baskets 3 and
wire shelves 4
Colour: Beige
Width
Cat. No.
300 mm
805.83.491
380 mm
805.83.492
460 mm
805.83.493
700 mm
805.83.494
For mounting pull out wardrobe frame 1
under a shelf
Finish: Silver powder coated steel
Cat. No.
805.78.000
3 • WIRE BASKET
15 • BEECH TROUSER RACKS
For hanging onto frame 1
Depth: 500 mm
Finish: Silver powder coated steel
Width
Cat. No.
380 mm
805.83.200
410 mm
805.83.201
490 mm
805.83.202
730 mm
805.83.203
Order basket linen separately
4 • WIRE SHELF
For hanging onto frame 1
Depth: 500 mm
Finish: Silver powder coated steel
Width
Cat. No.
410 mm
805.83.221
490 mm
805.83.222
730 mm
805.83.223
HHC.08
6 • SHOE RACK
For hanging onto frame 1
Depth: 500 mm
Finish: Silver powder coated steel
Width
Cat. No.
390 mm
805.84.201
470 mm
805.84.202
2 • UNDER SHELF MOUNTING PLATE
For hanging onto frame
Depth: 525 mm
Finish: Lacquered beech timber
Width
Cat. No.
480 mm
807.49.301
720 mm
807.49.302
16 • PULL OUT WARDROBE RAIL
Single extension ball bearing runners
Depth: 500 mm
Width: 85 mm
Height: 175 mm
Finish: Silver aluminium
Cat. No.
807.45.220
www.hafele.com
85
pull-out storage system
13
9
7
7 • LAUNDRY BAG WITH FRAME
11 • PULL-OUT TIE AND BELT RACK
For hanging onto pull-out frame 1
Removable bag with handle holes, lacquered
beech frame and cream linen bag
Size (W x D x H): 480 x 525 x 445 mm
Cat. No.
805.82.300
With single extension ball bearing runner
Side mounting fixings included
Finish: Silver powder coated steel
Cat. No.
807.46.220
12 • SHATTER PROOF OBJECT TRAY
8 • PULL-OUT STORAGE UNIT
With single extension ball bearing runners
Side mounting fixings included
Finish: Silver powder coated steel
600 mm = 2 baskets, 790 = 3 baskets
Installed height
Cat. No.
600 mm
805.81.241
790 mm
805.81.242
9 • PULL-OUT SHOE RACK UNIT
With single extension ball bearing runners
Side mounting fixings included
Finish: Silver powder coated steel
600 mm = 2 baskets, 790 = 3 baskets
Installed height
Cat. No.
600 mm
805.81.251
790 mm
805.81.252
For placing onto trouser rails
Finish: Powder coated silver coloured rails
2 grey shatterproof trays with glazed finish
Length: 440-520 mm adjustable
Width x Height: 100 x 45 mm
Cat. No.
807.49.390
13 • SHATTER PROOF TRAY BASKETS
For hanging onto frame 1
Shatterproof tray with glazed finish
Depth: 525 mm
Width
Cat. No.
240 mm
805.83.481
320 mm
805.83.482
400 mm
805.83.483
480 mm
805.83.484
14 • WIRE RAILS FOR TROUSERS
10 • PULL-OUT TROUSER RACK
With single extension ball bearing runner
Side mounting fixings included
Finish: Silver powder coated steel
Cat. No.
807.47.210
86
www.hafele.com
For hanging onto frame 1
480/720 mm widths have space for
object tray
Finish: Silver coloured powder coated steel
Size (D x H): 500 x 105 mm
Width
Cat. No.
485 mm
807.48.201
725 mm
807.48.202
HHC.08
wardrobe accessories
1 • SHOE HOLDER
For screw mounting independently or with wall rail 2
Extendible from 460-750 mm
Finish: Chrome-plated polished steel and black or
silver coloured plastic mounting parts
Chrome/Silver
892.12.906
2 • WALL RAIL
For screw mounting of shoe holder 1
Overall length: 1120 mm (including end caps)
Finish: Black anodised aluminium rail and black
plastic end caps
Silver coloured
892.12.990
1
5
3 • SHOE RACK
4 • EXTENSION BASKET
Fits guide carrier or can be mounted with runners
Dimensions (W x D x H): 680 x 500 x 110 mm
Finish: Chrome-plated polished steel
Cat. No.
805.54.212
Fits guide carrier or can be mounted with runners
Dimensions (W x D x H): 680 x 500 x 160 mm
Finish: Chrome-plated polished steel
Cat. No.
805.54.203
5 • GUIDE CARRIERS
6 • RUNNERS
Complete with guides for shoe rack and basket
Dimension (W x D x H): 65 x 495 x 475 mm
Finish: Chrome-plated polished steel frame and
galvanised steel guides
Cat. No.
805.53.206
To use with shoe rack and extension basket instead
of guide carrier, can be mounted directly to carcase
Finish: Chrome-plated polished steel
Full extension
Cat. No.
540.24.912
Part extension
Cat. No.
540.24.903
3
HHC.08
www.hafele.com
87
wardrobe accessories
• Trouser extension (805.45.210)
88
• Trouser extension (805.45.204)
• Tie and belt extension (807.41.211)
• TIE EXTENSION
• TIE AND CUFFLINK EXTENSION
• TROUSER EXTENSION
For 29 ties
To be used left or right
Dimensions (W x D x H): 130 x 450 x 80 mm
Cat. No.
807.53.940
For 16 ties
To be used right handed
Dimensions (W x D x H): 130 x 455 x 80 mm
Finish: Silver anodised, translucent plastic
Cat. No.
807.53.941
For 4 pairs of trousers
To be used left or right
Dimensions (W x D x H): 220 x 450 x 80 mm
Finish: Silver anodised, translucent plastic
Cat. No.
807.53.947
• TIE EXTENSION
• TIE AND BELT EXTENSION
• TROUSER EXTENSION
For 17 ties
To be used left or right
Dimensions (W x D x H): 74 x 455 x 87 mm
Finish: Chrome-plated polished steel and white powder coated
steel guide cover
Cat. No.
807.41.210
Complete with guide and spacer
Dimensions (W x D x H): 74 x 455 x 118 mm
Finish: Chrome-plated polished steel
Cat. No.
807.41.211
For 10 pairs of trousers
To be used left or right
Dimensions (W x D x H): 465 x 505 x 100 mm
Finish: Chrome-plated polished steel and white powder coated
steel guide cover
Cat. No.
805.45.204
• TIE RACK
• COAT HANGER
• EXTENDING WARDROBE RAIL
Dimensions (W x D x H): 425 x 22 x 28 mm
Material: Steel rail and zinc alloy rail mounts
Finish: Nickel-plated, polished
Cat. No.
807.20.743
Hinged, for screw fixing to side panel
Length: 320 mm
Swinging angle: 35º-55º
Mounting plate: Ø60 mm
Finish: Chrome-plated, polished steel
Cat. No.
805.43.200
Load capacity: 10 kg
Finish: Nickel-plated steel rail and plastic coated white runner
Length
Cat. No.
290 mm
805.12.303
340 mm
805.12.358
390 mm
805.12.401
440 mm
805.12.456
www.hafele.com
HHC.08
wardrobe accessories
blah blah blahblah blah blahblah
blah blahblah blah blahblah blah
blahblah blah blahblah blah blahblah blah blahblah blah blahblah
blah blahblah blah blahblah blah
blahblah blah blahblah blah blahblah blah blahblah blah blahblah
blah blahblah blah blahblah blah
blahblah blah blahblah blah blahblah blah blahblah blah blahblah
blah blahblah blah blahblah blah
blahblah blah
SHOE RAIL AND BRACKETS
Wardrobe rails are
the quickest and
easiest way to create
hanging space.
• WARDROBE RAIL
• WARDROBE RAIL
• SHOE RAIL - CUT TO SIZE
Dimensions (H x W x L): 30 x 15 x 1 mm
Finish: Chrome plated steel
Length
Cat. No.
1.5 m
801.13.221
2.5 m
801.13.220
With fluted design
Dimensions (H x W x L): 30 x 15 mm x 3.6 mtr
Finish: Silver anodised
Cat. No.
801.08.903
Ø19 mm
Length: 762 mm
Material: Aluminium, anodised
Finish
Cat. No.
Chrome, polished
805.87.200
Aluminium, satin
805.87.900
• WARDROBE RAIL SUPPORT
• WARDROBE RAIL CENTRE SUPPORT
• SHOE RAIL BRACKET
Includes 3 screw holes
Finish: Nickel-plated
Cat. No.
803.33.758
Includes 1 screw hole and two locating pins.
Finish: Nickel-plated
Cat. No.
803.33.723
Finish: Chrome-plated
Cat. No.
802.04.208
Connects the shoe rail to the side panel using 32 mm line bore
holes with 5 mm press in dowels
Material: Aluminium, anodised
Finish
Cat. No.
Black
805.87.993
Requires mounting rail, order separately.
HHC.08
www.hafele.com
89
wardrobe accessories
• COAT HOOK
• COAT HOOK
• COAT HOOK
• COAT HOOK
Includes 1 piece
Size (W x D x H): 18 x 35 x 60 mm
Finish: Aluminium, polished
Cat. No.
842.01.909
Includes 1 piece
Size (W x D x H): 17 x 41 x 47 mm
Finish: Silver coloured, satin anodised aluminium
Cat. No.
842.20.959
Includes 1 piece
Size (W x D x H): 18 x 93 x 158 mm
Finish: Silver coloured, anodised aluminium
Cat. No.
842.20.906
Includes 1 piece
Size (W x D x H): 19 x 78 x 56 mm
Finish: Silver coloured, anodised aluminium
With hard rubber cap
Cat. No.
842.20.904
• COAT HOOK
• COAT HOOK
• COAT HOOK
• WARDROBE HOOK
Includes 1 piece
Size (W x D x H): 21 x 33 x 40 mm
Finish: Aluminium, polished
Cat. No.
845.02.803
Includes 1 piece
Size (W x D x H): 60 x 32 x 50 mm
Finish: Aluminium, polished
Cat. No.
845.12.809
Includes 1 piece
Length: 51mm
Ø15 mm
Finish: Stainless steel, satin
Cat. No.
842.58.000
Includes 1 piece and mounting material
Ø20 mm
Depth: 100 mm
Finish
Cat. No.
Brushed, stainless 842.44.000
Satin stainless steel 842.44.007
• RETRACTABLE HOOKS
• COAT HOOK
Includes 4 concealable hooks, with decorative black mirrored finish
Length: 600 mm
Finish: Polymide plastic and glass
Cat. No.
844.15.300
90
www.hafele.com
HHC.08
wardrobe accessories
• WARDROBE LIFT
For screw mounting to wardrobe side panels
Includes Ø28 mm clothes rail with
adjusting mechanism
Load capacity: 10 kg
Width: 600 - 1000 mm
Finish
Cat. No.
Alu/alu
805.20.532
Nickel-plated/Black 805.20.331
Width: 700 - 1200 mm
Finish
Cat. No.
Silver/Grey
805.20.557
Nickel-plated/Black 805.20.355
• WARDROBE LIFT
For screw mounting to wardrobe side panels
Includes Ø28 mm clothes rail with
adjusting mechanism
Width: 870-1190 mm
Load capacity: 15 kg
Finish: Nickel-plated metal and black plastic
Cat. No.
805.24.330
• PIVOT SLIDING MIRROR
With single extension runners
Side mounting fixings
Finish: mirror
Cat. No.
805.61.910
Pivot Pull-out mirror slides out from the cupboard and pivots to the left
HHC.08
www.hafele.com
91
built-in foldaway bed
QUICK ASSEMBLY TECHNOLOGY
• Pre-mounted bearing plates, gas
loaded springs and foot linkage enable
simple assembly and saves time
• Sturdy torsion free steel pipe frame,
powder coated in anthracite colour
• Timber slatted frame support in
laminated beech
• Head to foot adjustment
• Mattress retainer
• Automatic foot mechanism integrated feet extend automatically on
opening and retract on closure
• Self-lubricating bearings and the
concealed mounted gas loaded springs
allow the bed to be effortlessly opened
and closed.
• LGA quality certificate
• Installation drawings enclosed
• BETTLIFT BUILT-IN FOLDAWAY BEDS
For single beds, vertical or side-folding
BETTLIFT FOLDAWAY BED
Vertical single bed
Installation height: 2100 mm
Plinth height: 90 -100 mm
Retaining straps for bed linens: 3 pieces
Safety stops: 2 pieces
Load capacity: 44-55 kg
With mattress
Cat. No.
271.91.113
Without mattress
Cat. No.
271.91.115
Order two single beds and one centre support fpr double bed
Side-folding single bed
Installation height: 1100 mm
Plinth height: 70 -105 mm
Retaining straps for bed linens: 3 pieces
Safety straps: 2 pieces
Load capacity: 40 - 55 kg
Mattress size
size mm
Cat. No.
900 x 2000 x 160
271.91.143
1400 x 2000 x 160
271.91.145
Vertical folding bed
Side-folding bed
• CENTRE SUPPORT
For connecting two single beds to make a double bed
Finish: Powder-coated anthracite, steel
Cat. No.
271.87.101
• SECURING BRACKET
• MATTRESS
MATTRESS
92
www.hafele.com
To prevent carcase of foldaway beds from tipping
Finish: Powder-coated anthracite, steel
Cat. No.
271.98.100
Specification: pure cotton liners, wool on both sides, quilted with
the HYPERFLEX foam core, cotton drill,
elastic terry cloth
Cover: Removable with zipper on 3 sides
and dry-cleanable
Cat. No.single
271.65.473
Cat. No.double
271.65.493
HHC.08
Home Entertainment
• LCD/plasma screen units
• plasma/t.v. monitor supports
• audio/video storage
HHC.08
www.hafele.com
93
plasma tv lift & LCD kitchen tv’s
The plasma screen
elevation system,
allows your plasma
screen TV to be hidden
out of sight and easily
accessible with the
infrared remote control,
when your family wants
to watch your favourite
television programmes.
• PLASMA TELEVISION LIFT
• 10.2" LCD/TV/DVDMP3
• 19" LCD/TV/DVD
Includes 24V transformer, power outlets for
TV and DVD and up/down switch
Load capacity: 80 kg
Finish: Black steel
To fit screen size
Cat. No.
42 inch
421.68.301
50 inch
421.68.302
DC 12V-24V / 240V
Weight 1.2 kg
Built-in DVB-T and analogue tuner
Built-in FM transmitter
USB port and card reader (SM/MS/MS-Pro/MMC)
Composite AV in / AV out function
AC-DC adaptor, AV cable
Earphones, remote control, ATV antenna,
12V car plug, accessories case
Power consumption: 20W
Cat. No.
532.50.380
DC 12V / 240V
Weight: 5.2 kg
Anti-shock/vibration
USB port and card reader (SD/MS/MMC)
Stereo audio inputs
Full scart. AV input, YPBPR,
S-video, PC Video/Audio in, HDMI, CI,
AC-DC adaptor, AV cable
Remote control, 12V csr plug
Power consumption 30W
Cat. No.
532.52.320
Home Office
• INFRARED REMOTE CONTROL (NOT SHOWN)
For plasma TV electric elevating system with coding system,
consisting of transmitter and receiver
Cat. No.
421.65.908
360º
125
100
100
90º
120º
80
+20º
-20º
250
155
90
120
94
• DROP DOWN TV BRACKET 360˚ ROTATION
• SINGLE ARTICULATION WALL BRACKET
• SLIDE OUT LCD BRACKET
Max. load 5 kg
Cat. No
Max. load 20 kg
Cat. No.
818.91.910
Can be fixed to any side of the cabinet to allow
for a multitude of design options
180˚ swivel horizontal or vertical
Finish: Aluminium, silver anodised
Max. load 12 kg
Cat. No.
421.99.900
818.92.930
www.hafele.com
HHC.08
audio / video storage
• STICK ON MULTIMEDIA RAILS
• DISC CASE STORAGE RAIL
• AUDIO CASSETTE STORAGE RAIL
• VHS TAPE STORAGE RAIL
Holds up to 25, depending upon media type
Supports DVD, CD or video cassette
Adhesive strips supplied and two countersunk
screw holes for each side for screw mounting
Finish: Black plastic
Cat. No.
810.89.300
Supports up to 23 CD cases
Finish: Black plastic
Attaches on underside using adhesive strips
Cat. No.
810.63.336
Supports up to 15 cassette cases
Finish: Black plastic
Attaches on underside using adhesive strips
Cat. No.
810.63.318
Supports up to 10 VHS tapes
Finish: Black plastic
Attaches on underside using adhesive strips
Cat. No.
810.63.327
320
320
• Press to lock the CD/DVD
160
160
200
133
• DIVIDERS
• POP-OUT CD STORAGE RACK
• POP-OUT DVD STORAGE RACK
Supports LP’s, books and CD’s
Inserts into Ø5 mm holes
Finish: Galvanised steel
For CD’s
Height x Width
Cat. No.
115 x 96 mm
810.69.910
For records and books
Height x Width
Cat. No.
192 x 192 mm
810.69.920
Storage capacity: 20 single CD’s
Pop-out feature is by double plastic lug springs
Finish: Black plastic
Cat. No.
810.83.300
Storage capacity: 15 DVD’s
Pop-out feature is by double plastic lug springs
Finish: Black plastic
Cat. No.
810.84.310
HHC.08
• Press for automatic release
www.hafele.com
95
Home Office
Accessories
• office accessories
• cable sets
• Ellipta systems
• desk and table legs
• furniture castors
96
www.hafele.com
HHC.08
home office fur niture accessories
5
2
4
3
6
1
7
1 • TOOL BAR SET
2 • REAR PANEL SET
With tool bar, end caps, clamps and
fitting elements
Finish: Brushed aluminium posts, black plastic
Length
Cat. No.
800 mm
818.52.308
1200 mm
818.52.312
Complete set includes panel wall with
end profiles and fittings
Finish: Brushed aluminium posts, black plastic
Length
Cat. No.
800 mm
818.52.328
1200 mm
818.52.332
3 • LANDSCAPE A4 INTEGRAL TRAY
4 • PORTRAIT A4 INTEGRAL TRAY
5 • STACKING BARS
Size (W x D x H): 395 x 280 x 62 mm
Material: Plastic
Finish
Cat. No.
Anthracite
818.56.359
Opaque
818.56.750
Size (W x D x H): 272 x 350 x 62 mm
Material: Plastic
Finish
Cat. No.
Anthracite
818.56.368
Opaque
818.56.760
For stacking Integral trays
Finish: Anthracite coloured plastic
2 tray set
Cat. No.
818.56.322
3 tray set
Cat. No.
818.56.331
6 • A4 STATIONARY INTEGRAL TRAY
7 • SWIVEL TRAY
Size (W x D x H): 388 x 166 x 95 mm
Material: Plastic
Finish
Cat. No.
Anthracite
818.57.301
Opaque
818.57.700
For mounting under shelf, cabinet or worktop
Includes 2 adjustable dividers
Material: Strong durable plastic
Colour
Cat. No.
Opaque
547.60.700
HHC.08
www.hafele.com
97
combi-line accessories
6
1
2
5
• CD storage racks not available.
98
1 • PROFILE
2 • END CAP
3 • PROFILE INSERT
Fixing holes at 200 mm intervals
Length: 2 metres
Finish: Aluminium coloured plastic
Cat. No.
815.80.900
Finish: Silver coloured plastic
Cat. No.
815.80.990
For use with Combi-Line profile, to conceal
fixing grooves where left visible
Length: 1 metre
Finish: Aluminium coloured plastic
Cat. No.
815.80.991
4 • MAGNETIC PIN BOARD
5 • ADAPTOR FOR TRAYS
6 • SHELF CLAMP
Includes board and four magnets
Size: 210 x 210 mm
Finish: Aluminium coloured steel
Cat. No.
815.83.900
Enables Integral trays to be used with
Combi-Line system
Finish: Aluminium coloured plastic
Cat. No.
815.83.500
For use with Combi-Line products
Includes 1 left hand and 1 right hand clamp for
16 mm board thickness
Finish: Silver coloured plastic
Cat. No.
815.81.950
www.hafele.com
HHC.08
cable sets
• CABLE SET
• CABLE SET
For press fitting into Ø80 mm holes
2 piece oval with 1 outlet
Trim cap can be removed
Finish: Black and silver coloured plastic
Cat. No.
631.41.904
For press fitting into Ø80 mm holes
2 piece oval with 2 outlets
Trim cap can be removed
Finish: Black and silver coloured plastic
Cat. No.
631.41.914
• CABLE SET
• CABLE SET
With spring-loaded rotation segment in cover
Finish: Plastic
For press fitting into Ø60 mm holes
Colour
Cat. No.
Stainless steel colour 429.99.002
Silver
429.99.212
With spring-loaded rotation segment in cover
Finish: Plastic
For press fitting into Ø60 mm holes
Colour
Cat. No.
Charcoal
631.11.312
White
631.11.702
Light Grey
631.11.502
Sepia Brown
631.11.102
Black
631.11.302
For press fitting into Ø80 mm holes
Colour
Cat. No.
Stainless steel colour 429.99.004
Silver
429.99.214
For press fitting into Ø80 mm holes
Colour
Cat. No.
Charcoal
631.11.314
White
631.11.704
Light Grey
631.11.504
Sepia Brown
631.11.104
Black
631.11.304
• VERTICAL CABLE GUIDE
• EXTENDING PENCIL TRAY
For screw mounting beneath the desk top,
compartments allowed for pens, pencils and
documents up to A4
Includes mounting template and fixing material
Runner extension: 320 mm
Material: Plastic
Finish
Cat. No.
Black
429.57.308
Grey
429.57.504
HHC.08
For concealing cables and cords under the desktop
With strain relief, weighted with base
Includes table top adaptor for screw fixing, cable
guide and floor adaptor
Can be lengthened and shortened by adding and
removing links
Material: Plastic
Length: 1500 mm
Colour
Cat. No.
Translucent white
631.01.752
Silver
631.01.952
Length: 2900 mm
Colour
Cat. No.
Translucent white
631.01.755
Silver
631.01.955
Ceiling rose for fixing to ceiling tiles
Colour
Cat. No.
Silver
631.01.959
www.hafele.com
99
ellipta tool bar & desktop systems
• ELLIPTA POWERED TOOL BAR
For desktop thickness 10 - 36 mm
Finish: Powder coated silver diecast and
extruded aluminium
Dimension
Cat. No.
910 mm x 2 GPO 818.10.000
910 mm x 4 GPO 818.10.001
1250 mm x 4 GPO 818.13.001
Desktop Accessories
• PHONE TRAY
• CABLE BASKET
• MOBILE PHONE TRAY
Finish: Silver powder coated steel
Cat. No.
818.12.040
Finish: Silver powder coated steel
Cat. No.
818.12.060
Finish: Silver powder coated steel
Cat. No.
818.12.020
100 www.hafele.com
www.hafele.com HHC.08
desktop & organisation accessories
Ideal for kitchen island benchtops or home office, the Vertical Powerdock is
recessed, so it sits flush with the furniture top when not in use. It is also easy to
install or retrofit.
Available in silver colour aluminium/black or champagne/beige. The 4 GPO
champagne version, as shown, features one GPO remaining below bench level.
Ideal power connection for a dishwasher in the kitchen or a computer in the
study. The unique champagne colour is the perfect option to match light
coloured or stone benchtops
• VERTICAL POWERDOCK - 10 AMP
For home office
Recessed flush when not in use
Includes concealed power with prefitted 2 metre
lead with 10 Amp power lead and 3 pin plug
Material: Robust aluminium with polycarbonate
and ABS plastic components
2 x GPO
Finish
Silver
4 x GPO
Finish
Champagne
Cat. No.
822.74.904
Cat. No.
822.74.405
Desktop Organisation
• WIRE DOUBLE TIER CABLE CHANNEL
• CABLE HOOK
Material: Steel wire, powder-coated grey
Length
Cat. No.
650 mm
631.14.911
950 mm
631.14.912
1250 mm
631.14.913
1550 mm
631.14.914
Provides simple yet functional cable management
Self-tapping wood thread for Ø5 mm holes
Material: Re-inforced nylon, black
Cat. No.
631.02.300
Self-taping
thread
Ø6
18
9
Length
28
210
66
75
33
57
HHC.08
• HORIZONTAL MOUNTING PLATE
• CPU HOLDER
For horizontal positioning of computer
Finish: Black powder coated steel
Cat. No.
639.74.390
For securing CPU, DVD player or Video recorder
below the table top, screw-on plate
With extending guide track (76 mm),
quick action straps (up to 1,630 mm perimeter)
and protective padding
Material: Steel screw-on plate with plastic parts
and nylon straps
Finish: Black powder coated screw-on plate
Load bearing capacity: 34 kg
Installation length: 451 mm
Adjustability: 360º
Supplied with fixing materials and instructions
Cat. No.
639.74.300
www.hafele.com 101
ellipta flatscreen ar m
Thinking space is not just room to move
your mind, it’s an environment that nurtures
ingenuity, productivity and creativity.
It improves the way individuals work,
to help improve your business.
The Ellipta flat screen arm offers a unique
spring tension design, which allows
feather-light height adjustment at just the
touch of a finger.
It also provides ergonomic benefits and
enables dynamic, multi-screen use to
elevate your professional capabilities.
1 • SHORT ARM
Swivel and tilt only, no spring needed
Extension: 80 mm
Colour
Cat. No.
Silver
818.11.974
Black
818.11.374
Choosing the correct Ellipta arm and
Mount combination is as easy as 1, 2, 3 1 • Select your flatscreen arm and note its weight
2 • Select your Ellipta Arm based on its required
length and spring strength
3 • Select your method of mounting
2 • MEDIUM ARM
All movement
Extension: 353.5 mm at full extension
Supports LCD screens weighing between Standard: 3 kg and 5 kg
(most 16-17 inch flat screens)
Heavy duty: 5 kg and 7.5 kg
(most flat screens up to 24 inches)
Medium arm + Standard spring
Colour
Cat. No.
Silver
818.11.942
Medium arm + Heavy duty spring
Colour
Cat. No.
Silver
818.11.952
3 • LONG ARM
All movement with extension arms
Extension: 554.5 mm at full extension
Supports LCD screens weighing between Standard: 3 kg and 5 kg
(most 16-17 inch flat screens)
Heavy duty: 5 kg and 7.5 kg
(most flat screens up to 24 inches)
Long arm + Standard spring
Colour
Cat. No.
Silver
818.11.903
Black
818.11.303
Long arm + Heavy duty spring
Colour
Cat. No.
Silver
818.11.932
Black
818.11.332
102 www.hafele.com
HHC.08
flatscreen ar ms mounting systems
• THROUGH DESK - DESK MOUNT
Secured through Ø60 mm hole cut in desk top
Provides a more secure mount for heavier screens
Cat. No.
818.11.914
• EDGE CLAMP - DESK MOUNT
Secured to the edge of the desk
Maximum 33 mm desktop thickness
Colour
Cat. No.
Silver
818.11.915
Black
818.11.315
Not recommended for dual screens with
net weight over 7.5kg.
• DUAL ARM ADAPTOR KIT
Allows 2 arms to be supported on one desk leg
Cat. No.
818.11.960
Due to additional weight, the “through desk” mount
is recommended.
• WALL MOUNT
Attaches the Ellipta arm directly to the wall
Cat. No.
818.11.980
HHC.08
www.hafele.com 103
desk & table legs
• SQUARE TABLE/DESK LEG
• E-LEG WITH ADJUSTABLE FOOT
• E-LEG WITH BRAKE CASTOR
With adjustable foot + 20 mm
60 mm Square
Top fixing plate is welded to leg
Material: Powder coated or plated steel
Finish
Cat. No.
Chrome, polished
635.36.269
Brushed steel
635.36.469
Silver coloured
635.36.279
Black satin
635.36.369
Includes fastening material
Adjustable foot +25 mm
Height: 690 mm, Ø60 mm
Load rating: approx. 100 kg per leg
Finish: Plated or powder coated steel legs,
Black plastic leveller and black steel mounting plate
Finish
Cat. No.
Polished chrome
635.61.268
Black gloss
635.61.368
Brushed steel
635.61.468
Silver
635.61.968
Includes mounting plate and castor with brake
Height: 690 mm, Ø60 mm
Load rating: approx. 50 kg per leg
Finish: Steel-plated or powder coated legs,
Matt black nylon and galvanised steel castor and
Black steel mounting plate
Finish
Cat. No.
Polished chrome
635.60.264
Black gloss
635.60.364
Brushed steel
635.60.464
• CONICAL TABLE/DESK LEG
• CONICAL TABLE/DESK LEG
With height adjustable glide, + 10 mm
Height: 710 mm (including mounting plate)
Leg diameter: Ø42 mm
Material: Steel table leg, plastic glide
and zinc alloy mounting plate
Finish
Chrome, polished
Cat. No.
635.44.271
Stainless steel colour, gloss
Cat. No.
635.44.671
With height adjustable glide, + 15 mm
Height: 710 mm (including mounting plate)
Leg diameter: Ø60 mm
Material: Steel table leg, plastic glide
and zinc alloy mounting plate
Finish
Cat. No.
Chrome, polished
635.49.271
Silver
635.49.971
104 www.hafele.com
HHC.08
fur niture castors
Castors designed for living space
• Ideal for shop fitting and display
• 40 and 60 kg load capacity safely
suits working furniture
• Galvanised housing, black wheel and
grey running surface
• German made
• FURNITURE CASTOR
Wheel diameter 50 mm
Capacity: Up to 40 kg per castor
Mounted height: 71 mm
With brake
Cat. No.
663.16.910
Without brake
Cat. No.
663.06.910
• Steel housing, galvanised.
• Wheel and swivel brake.
• Plastic polamide wheel.
Wheel diameter 75 mm
Capacity: Up to 60 kg per castor
Mounted height: 100 mm
With brake
Cat. No.
663.16.920
Without brake
Cat. No.
663.06.920
• Solid rubber running surface.
With brake
A
• Swivelling mounting plate.
B
• M10 threaded bolt.
• Grey plastic, two-tone.
• FURNITURE CASTOR, SWIVELLING PLATE
A
Wheel diameter 70 mm
Capacity: Up to 100 kg per castor
Mounted height: 87 mm
With brake
Cat. No.
660.29.901
Without brake
Cat. No.
660.30.902
• Wheel brake.
Without brake
With swivelling threaded bolt, steel galvanised
HHC.08
With brake
With swivelling mounting plate, steel galvanised
• FURNITURE CASTOR, M10 THREADED BOLT
B
Wheel diameter 70 mm
Capacity: Up to 100 kg per castor
Mounted height: 80 mm
With brake
Cat. No.
660.29.900
www.hafele.com 105
Lighting
• wall mounted lighting shelves
• down lighting
• task lights
• led lights
• profile system
• halogen lights
• deck lighting
Gera Leuchten + Licht System
106 www.hafele.com
HHC.08
LED lighting
• DECK LIGHT
Waterproof deck light
0.5 watt with 750 mm lead
Finish: Zinc alloy with stainless steel
finish
Dimensions: Ø48-50 mm cut out,
Ø60 mm outside
Light Colour
Cat. No.
White
830.83.700
Warm white
830.83.701
Blue
830.83.800
Green
830.83.000
Yellow
830.83.600
Red
830.83.900
• TRANSFORMER
240 TO 12V - 20W
Includes plug and lead
Can run up to 30 lights
Colour: Black
Cat. No.
830.84.300
• LEAD ADAPTOR
• EXTENSION LEADS
For the distribution of power to a
number of deck lights
Colour: Black plastic
Lead adaptor
Cat. No.
2 way
830.85.391
3 way
830.85.390
For connecting transformer to lead
adaptor between lead adaptors
Colour: Black lead
Length
Cat. No.
1 metre
830.85.301
3 metres
830.85.303
5 metres
830.85.305
10 metres
830.85.307
15 metres
830.85.309
• AUTOMATIC LIGHT
SENSING SWITCH
Enables the system to turn on when
the sun goes down and turn off when
the sun comes up.
Color: Black
Cat. No.
830.85.392
• LED CABINET LAMP
For use in cabinetry and furniture
applications, kitchen cabinets.
Surface for recess mounted 66 mm
installation hole
Features: Low power consumption
3 x 1W LED’s
Finish: Silver coloured plastic outer,
silver coloured metal body
Cat. No.
830.20.930
• LIGHT KIT SETS
• INDIVIDUAL LIGHTS
• TRANSFORMER
Kit set includes 3 LED lights for
surface mounting or recessing into a
Ø25 mm hole, transformer,
distribution block, mains lead and
instructions
Power: 1 watt
Finish: Silver plastic
Colour
Cat. No.
Warm white
830.88.000
Cool white
830.88.010
To be used with transformers (order
separately)
Lights come standard with:
1 watt x 1 lamp with 1.2 metre lead
and plug
Colour
Cat. No.
Warm white
830.88.070
Cool white
830.88.075
700 ma, 1.83 metre mains lead
and distribution block for up to
6 LED lamps
Cat. No.
830.88.080
To be used in conjunction with
individual lights
Go Green!
LED = Light Emitting Diode lights emit
minimum heat and save energy!
With a lifespan of approximately 50,000
hours, there is virtually no need to
replace the bulbs.
HHC.08
www.hafele.com
107
LED lighting
LED = Light Emitting Diode lights emit
minimum heat and save energy!
With a lifespan of approximately 50,000
hours, there is virtually no need
to replace the bulbs.
• RECESS MOUNTED LED LIGHT
• RECESS MOUNTED LED LIGHT
Recess mounted with 34 mm Ø 22 mm depth
1.2W warm white 60˚ lens
Natural white
Finish
Cat. No.
Aluminium
830.57.995
Warm white
Finish
Cat. No.
White
830.57.795
Recess mounted with 35 mm Ø 12 mm depth
1.2W warm white 50˚ lens
Finish
Cat. No.
Aluminium
830.57.940
White
830.57.740
• LED DISTRIBUTOR BLOCK
• RECESS MOUNTED LED LIGHT
2 way with 1 m lead
Cat. No.
830.58.340
6 way with 3 m lead
Cat. No.
830.58.330
Recess mounted with 44 mm Ø 21 mm depth
Tilting 1.2W 60˚ lens
Natural white
Finish
Cat. No.
Aluminium
830.57.925
Warm white
Finish
Cat. No.
White
830.57.725
108 www.hafele.com
HHC.08
LED lighting
• SUPER SHALLOW RECESS MOUNTED LED LIGHT
• RECESS MOUNTED LED LIGHT
Super shallow 11 mm recess mounting 56 mm Ø
Recess mounted 53 mm or 53 x 105 mm 17 mm depth
Tilting natural white 60˚ lens
Wattage
Cat. No.
1 x 1.2W
830.57.955
2 x 1.2W
830.57.965
Brushed aluminium anodised, warm white 3 x 1W
Cat No.
830.57.970
Surface mounting ring, aluminium anodised
Cat. No.
830.57.975
White, warm white, 3x1W
Cat. No.
830.57.770
Surface mounting ring, aluminium white
Cat. No.
830.57.775
• LED DRIVERS
• RECESS MOUNTED LED LIGHT
8 x 1W or 6 x 1.2W
Cat No.
830.58.400
12 x 1W or 10 x 1.2W
Cat. No.
830.58.410
18 x 1W or 15 x 1.2W
Cat. No.
830.58.420
3 x 1.2W Natural White recess mounting
HHC.08
Fixed gimbal, 60 mm Ø 27.5 mm H
Cat No.
830.57.980
Tilting gimbal, 70 mm Ø 32 mm H
Cat. No.
830.57.985
www.hafele.com
109
LED light bar sets
25
250
11
• COLOUR CHANGING 9 LED LIGHT BAR
9.5
LED light bars can be mounted in aluminium profiles
LED colour: Red, green and blue
Material: 9 LED lights encased in insulating, clear plasic profile
Wattage: 1.6W
Cat. No.
830.37.120
9.5
7
7
39
18
122
22
19
22
22
75
9.5
9.5
46
14
32
• LED CONNECTION CABLE
• POWER SUPPLY UNIT
• DISTRIBUTION CONNECTION CABLE
For connecting 2 LED light bars. The flexible cable allows the LED
light bars to be connected around corners
Material: Plastic, white
Length mm
Cat. No.
40
830.38.411
1000
830.38.412
2000
830.38.413
With switch and distributor. Maximum 9 LED light bars can be
connected to the transformer
Material: Plastic, white
Length mm
Cat. No.
1000
830.06.700
For connecting distributor to LED light bars
Material: Plastic, white
Length mm
Cat. No.
1000
830.38.460
2000
830.38.461
18
Length
Length + 18
43
1
12
14
• PROFILE FOR LED LIGHT BAR
• END CAP
Recess mounted profile for use with LED light bars
Material: Aluminium, Cover: frosted plastic
Finish: Anodised
Length mm
Cat. No.
1000
830.39.901
2000
830.39.902
Finish: Stainless steel colour
Length mm
Cat. No.
1000
830.39.001
2000
830.39.002
Finish
1000
2000
110 www.hafele.com
Cat. No.
830.39.990
830.39.090
HHC.08
LED light bars
39
18
1
122
2
22
37
13
32
250
25
10
9
20
22
• COMPLETE LIGHT BAR KITS
10
Kit includes:
4 x 300 mm LED light bars
2 x Short connecting leads
3 x 2.5 metre connecting leads
1 x Distributor box
3 x End plugs
8 x Fixing screws
7 x Pieces of double sided tape
1 x Power supply with inline switches
1 x Power supply with fixing clip
Open
Colour
Cool white
Warm white
Closed
3
Cat. No.
830.92.001
830.92.000
250
25
10
22
22
9
20
22
10
9
Closed
Open
• LED LIGHT BAR PACK, 4 LENGTHS
• LED CONNECTION CABLE
15 LED light bar, for indoor use only
Power: 0.6W
Length: 300 mm
Material: Encased in insulation, clear plastic profile
Mounting: LED bar can be mounted via connecting clip or double sided tape included
Colour
Cat. No.
Cool white
830.92.011
Warm white
830.92.010
Blue
830.92.012
Red
830.92.014
Green
830.92.013
Yellow
830.92.015
For connecting 2 LED light bars
The flexible cable allows LED light bars to be
connected around corners
Finish: White plastic
Length
Cat. No.
300 mm
830.92.021
2500 mm
830.92.020
39
18
122
19
75
46
14
32
• DISTRIBUTION BOX
• POWER SUPPLY UNIT
For connecting distributor to LED light bars
Material: White plastic
Cat. No.
830.92.030
Maximum of 6 LED light bars can be connected to the transformer
Includes:
1 x 240V/16W transformer with inline switch
1 x 2000 mm mains lead
Material: White plastic
Cat. No.
830.92.040
HHC.08
www.hafele.com
111
LED strip lighting
LED strip lighting creates great ambience
while being practical and low cost.
• FLEXIBLE SMD LED STRIP
• LED BAR LIGHTS
Shock and vibration resistant decorative lighting on archways, ceilings, edge lighting, back lighting for
signage, emergency exit etc. Waterproof and long-life, as well as low power consumption (26 watts)
Roll includes two plugs for transformers, one at either end to allow for ease of cutting and re-use.
Power: Runs on 12V/DC car type battery or DC transformer (see below)
Length: 5 m roll
Material: Encased in insulation, clear plastic profile
Mounting: LED bar can be mounted via connecting clip or double sided tape included
Colour
Cat. No.
Cool white
830.75.710
Warm white
830.75.700
Blue
830.75.800
Red
830.75.900
Green
830.75.000
Yellow
830.75.600
LED strip lighting can be
interconnected for longer lengths
1.6W (L x W x D) 310 X 18.5 X 8 mm
Cat. No.
830.37.951
• TRANSFORMER
For use with above lighting
Finish: Black
Cat. No.
830.75.990
112 www.hafele.com
3.2W (L x W x D) 606 X 18.5 X 8 mm
Cat. No.
830.37.952
5W (L x W x D) 902 X 18.5 X 8 mm
Cat. No.
830.37.953
Drivers 24V DC For light bar only
10W
Cat. No.
830.58.770
60W
Cat. No.
830.58.775
• LED STRIP LIGHT WITH MOTION SENSOR 230V
With integrated balast
Cab. Width
Cat. No.
450 mm
833.02.401
500 mm
833.02.402
600 mm
833.02.403
900 mm
833.02.404
1000 mm
833.02.405
1200 mm
833.02.406
HHC.08
high voltage lighting
• SURFACE MOUNTED TASK LIGHT
• RECESS MOUNTED TASK LIGHT
240V, 50/60Hz
Size (W x H): 78 x 26 mm
Finish: Plastic
Length: 320 mm, Wattage: 8W
Finish
Cat. No.
White
826.11.701
Nickel, satin
826.11.601
Aluminium
826.11.901
Length: 550 mm, Wattage: 13W
Finish
Cat. No.
White
826.11.702
Nickel, satin
826.11.602
Aluminium
826.11.902
240V, 50/60Hz
Size (W x H): 78 x 22 mm
Apperture height: 12 mm
Finish: Plastic
Length: 366 mm, Wattage: 8W
Finish
Cat. No.
White
820.50.726
Length: 578 mm, Wattage: 13W
Finish
Cat. No.
White
820.50.735
• LEAD AND PLUG
• ADAPTOR
• CONNECTION LEAD
For surface mounted task light
Finish: White plastic
Length: 2000 mm
Cat. No.
820.51.858
For butt joint assembly of surface mounted light and input element
(lead and plug)
Finish: White plastic
Cat. No.
820.54.804
For joining surface mounted task lights
Finish: White plastic
Length
Cat. No.
300 mm
820.54.813
600 mm
820.54.822
1000 mm
820.54.831
1500 mm
820.54.840
• 20W SWIVELLING LIGHT
71.5
When sliding door opens the light will automatically switch
on and then off once closed. Integrated transformer
Colour
Cat. No.
Aluminium
824.07.912
Black
824.07.312
HHC.08
www.hafele.com
113
halogen lighting
• RECESSED MOUNTED
HALOGEN LIGHT
Press fit into Ø55 mm installation hole.
Includes 2000 mm input lead, mounting
instructions, complete with bulb installed
Use with Häfele power supply only.
Can be used surface mounted with optional ring
10W
Colour
Cat. No.
White
823.94.710
Black satin
823.94.310
Polished gold
823.94.810
Polished chrome
823.94.210
Chrome satin
823.94.410
Nickel satin
823.94.610
20W
Colour
White
Black satin
Polished gold
Polished chrome
Chrome satin
Nickel satin
Cat. No.
823.94.720
823.94.320
823.94.820
823.94.220
823.94.420
823.94.620
• PHOEBE RECESSED
MOUNTED LIGHT
Press fit into a 55 mm installation hole with either 24 mm (10W) or 29
mm (20W) depth
Finish: Chrome polished
Wattage
Cat. No.
10W
823.63.219
20W
823.63.228
Finish: Nickel matt
Wattage
Cat. No.
10W
823.63.610
20W
823.63.620
• 20W TRIANGULAR HALOGEN LIGHT
Dimensions: 130 x 122 x 40 mm
Finish: Stainless steel
Cat. No.
825.69.002
• TRANSFORMER
• 1.8M LEAD
20-60 VA
For up to 3 x 20W
6 x 10Wl
Cat. No.
Wth bare ends and three pin plug
Cat. No.
825.55.006
• DISTRIBUTOR BLOCK
3 way
6 way
Cat. No.
823.68.723
823.68.731
825.55.000
114 www.hafele.com
HHC.08
halogen lighting
Halogen down lights not only increase visibility in preparation areas, but help create a unique look for the
modern kitchen. Halogen down lights also add ambiance, mood, atmosphere and colour in living and dining
areas, helping to create the right look and feel in your living space.
• LOW HEAT HALOGEN LIGHT 20W
Press fit into a 78 mm installation hole
Finish
Cat. No.
White
821.87.752
Chrome
821.87.252
Brass
821.87.852
Satin nickel
821.87.652
Satin chrome
821.87.452
• SAMOA SENSOR LIGHT 20W
Press fit into a 58 mm installation hole
Finish
Cat. No.
Polished chrome
823.62.250
Stainless steel
823.62.050
• 20W CALLISTO SENSOR LIGHT
Press fit into a 65 mm installation hole
With automatic switch-off
Finish: Stainless steel
Finish
Cat. No.
Polished chrome
823.62.250
Stainless steel
823.62.050
HHC.08
• TRANSFORMER
• TRANSFORMER
With 6way distributor and mini plug
For use with switches on page 117
Cat. No.
60W
825.72.720
120W
825.72.721
With 6way distributor and Aus/NZ plug
Cat. No.
60W
825.72.730
120W
825.72.731
www.hafele.com
115
low voltage lights 12 VDC
• RECESS FLUSH MOUNTED LIGHT
• SEMI RECESSED LIGHT
• SEMI RECESSED ANTI-GLARE LIGHT
78 mm diameter cut-out
Finish
Cat. No.
White
826.16.723
Chrome
826.16.223
Satin nickel
826.16.623
78 mm diameter cut-out
Finish
Cat. No.
White
826.16.722
Chrome
826.16.222
Satin nickel
826.16.622
78 mm diameter cut-out
Finish
Cat. No.
White
826.16.720
Chrome
826.16.220
Satin nickel
826.16.620
• SURFACE MOUNTED LIGHT
• QUADRO RECESS MOUNTED LIGHT
Finish
White
Chrome
Satin nickel
78 mm diameter cut-out
Finish
Cat. No.
Translucent
826.16.430
White
826.16.730
Chrome
826.16.230
Satin nickel
826.16.630
Cat. No.
826.16.721
826.16.221
826.16.621
• RONDO C FLUSH MOUNTED LIGHT
• RONDO B SEMI-RECESSED MOUNTED LIGHT
• RONDO A SEMI RECESSED MOUNTED LIGHT
Finish
White
Chrome
Satin nickel
78 mm diameter cut-out
Finish
Cat. No.
White
826.16.745
Chrome
826.16.245
Satin nickel
826.16.645
78 mm diameter cut-out
Finish
Cat. No.
White
826.16.744
Chrome
826.16.244
Satin nickel
826.16.644
Cat. No.
826.16.740
826.16.240
826.16.640
116 www.hafele.com
HHC.08
low voltage lights 12 VDC
• LED LAMP 2.7W
• LIGHT DISC PRISMA 6W
• LIGHT DISC OPAL 6W
Finish
Cool white
Warm white
Finish
Cool white
Warm white
Finish
Cool white
Warm white
Day light
Cat. No.
826.16.994
826.16.993
Cat. No.
826.16.991
826.16.990
Cat. No.
826.87.790
826.87.791
826.16.992
• DOOR CONTACT SWITCH
• RECESSED SWITCH 2 M LEAD
• SENSOR SWITCH WITH AUS/NZ PLUG
230V / 2A
Cat. No.
78 mm diameter cut-out
Finish
Cat. No.
White
826.51.710
Chrome
826.51.210
Satin nickel
826.51.610
Finish
White
Chrome
Satin nickel
826.17.790
Cat. No.
826.51.720
826.51.220
826.51.620
• SPACER RING 5.5 MM
Reduces installation depth 11.5 mm
Finish
Cat. No.
White
826.51.715
Chrome
826.51.215
Satin nickel
826.51.615
• SUPPLY LEAD 3 M WITH AUS/NZ PLUG
• SUPPLY LEAD 3 M WITH AUS/NZ PLUG
• SUPPLY LEAD 3.5 M WITH AUS/NZ PLUG
Female mini socket
Length
1 m extension lead
2 m extension lead
6 way distributor
Cat. No.
6 way plus switch inlet
Cat. No.
826.17.750
HHC.08
826.17.730
Cat. No.
826.29.746
826.29.743
826.17.740
www.hafele.com
117
halogen lighting
The Midway profile
system is an easy way
to add lighting and
power in your kitchen
without using valuable
work space.
h a n g in g
Fo r t h e L in e ro
b o v e g o to
a cc e s so r ie s a
p a g e 64
• STRIP LIGHT
• DOUBLE SOCKET
For screw mounting to underside of cabinet Midway profile
accessories can be hung from the strip light
240V
Finish: matt chrome plastic
For screw mounting to underside of cabinet
Can be used in conjunction with strip light
Finish: matt chrome plastic
Cat. No.
543.04.480
Cat.No.
8W
450 mm
13W
600 mm
21W
900 mm
28W
1200 mm
543.04.471
543.04.472
543.04.473
543.04.474
Wall mounted lighting offers Style,
Comfort and Clarity in the kitchen
and also works as an accent piece
in your living area or bar.
• WALL MOUNTED LIGHTING SHELVES
230V, 50/60Hz
Length 450 mm
Wattage: 8W
Finish
Stainless steel
Silver colour anodized
Length 500 mm
Wattage: 8W
Finish
Stainless steel
Silver colour anodized
Length 600 mm
Wattage: 13W
Finish
Stainless steel
Silver colour anodized
118 www.hafele.com
Cat. No.
826.77.001
826.77.901
Cat. No.
827.77.002
826.77.902
Length 900 mm
Wattage: 21W
Finish
Stainless steel
Silver colour anodized
Length 1200 mm
Wattage: 28W
Finish
Stainless steel
Silver colour anodized
Cat. No.
826.77.004
826.77.904
Cat. No.
826.77.005
826.77.905
Cat. No.
826.77.003
826.77.903
HHC.08
Häfele Design Centres
A u c k l a n d • E a s t Ta m a k i • W e l l i n g t o n • C h r i s t c h u r c h
The four Häfele Showrooms capture
the very spirit of home design.
Featuring a collection of the finest
home and living fixtures from around
the globe, the Häfele Design Centres
offer opportunities and ideas to
invest in your home environment and
to develop your financial asset.
To experience the world of home
design and architectural fittings at
one venue, visit the Häfele Design
Centre in your area.
Eastern Design Centre (H/O) • 16 Accent Drive, East Tamaki, Auckland • 09 274 2040
Auckland Design Centre • 62 Cook Street, Auckland City, Auckland • 09 274 2530
Wellington Design Centre • The Wool Store Level 1, 262 Thorndon Quay, Wellington • 04 472 0294
Christchurch Design Centre • 5 Wigram Close, Sockburn, Christchurch • 03 343 8200
Häfele Architectural Hardware
The choice is yours
Functionality, reliability and quality are the main
selection criteria when deciding which products to include in our
range. We now have an
extensive collection of project hardware,
architectural and interior fittings which are at
the forefront of innovation and design.
The first edition of The Complete Häfele
Architectural Hardware is an important
reference for innovative products & ideas.
Updated regularly, the diverse range of
quality products are designed to improve
the functionality of residential, commercial,
retail and hospitality products.
For further information contact our Häfele sales office on
0800 4 HAFELE or visit www.hafele.com/nz
HHC.08
www.hafele.com
119
notes
120 www.hafele.com
HHC.08

Similar documents

Smart Spaces

Smart Spaces Side mounted three tier pull-out With soft-close GRASS runners • Version: • Dimensions: • Load capacity:

More information

PDF file

PDF file at source then waste should not be a mess. We offer a wide range of Select Bin Systems designed to encourage convenient separation of waste which is then ready for recycling.

More information