Energy Efficient Lighting in Buildings Lighting Concepts

Transcription

„Energy Efficient Lighting
in Residential, Commercial
and Public Buildings“
Utrecht, The Netherlands
June 1 & 2, 2010
„Energy Efficient Lighting Designs
for Retail Stores and Supermarkets”
Guido Fox – International Key Account Manager
Juni 2010
Energy Efficient Lighting in Buildings
Panel
(1) History & Mission
(2) Lighting Concepts & Energy Management
(3) Sample Pictures
(4) The Look Ahead…
Juni 2010
History & Mission
History:
Mission
• 1953 Heinz Bähren formed, Bähren OHG,
which grew to become BÄRO GmbH & Co. KG
• Best product illumination possible, while
using less fixtures and less lamps
• Recognized pan European as Specialist on
fresh Product Lighting Solutions
• Combine latest lamp, ballast and reflector
technology
• 1996 BÄRO Technology Division established,
specializing in UV-C air disinfection and most
recently Odour removal Technology
• Comprehensive lighting designs in order to
cope today’s ecological challenges
Juni 2010
Lighting Concepts
Aspects to be considered
Innovations
Service
Lighting
Design
Juni 2010
Lighting Concepts
Innovations
 Lamps
 Lumen Efficiency (lm/W)
 Low UV Radiation
 Color Rendering (CRI)
 Average Lamp Life Time
 Wattage (20W – 400W)
 Reflectors
 Spot Reflector
 Broad Beam Reflector
 Batwing Reflector
 Electronic Gear
 Operating Efficiency
 Quality of Lighting
 Operating & Security
Lumaire
Juni 2010
Lighting Concepts - Reflectors
Spot Beam
(24°)
Broad Beam
(30°/60°)
Batwing Beam
(50°, 70° or 90°)
Juni 2010
Vertical lamp position
– Counter
Spot Light
Horizontal lamp position
– Counter
Broad Beam Light
Juni 2010
Batwing Beam (70°)
The light cone of the 70 Batwing
reflector has a main beam angle of
70 . The useful light angles are 30
thru 100 . Optimal mounting heights
will vary depending on aisle spacing,
height of displays, and lamp selection.
However, the most common mounting
height will range between 2,70m to
3,50m above finished floor.
Note: the web may or may not be
used depending on aisle lighting effect
preferred.
Juni 2010
Sample Pictures
Lot of fixtures, not much light
Juni 2010
Sample Pictures
Illumination of the products?
Juni 2010
Sample Pictures
3 different type of fixtures…
Juni 2010
BÄRO - Sample Pictures
Focus
onon
Product
Presentation
Focus
Product
Presentation
Juni 2010
Different by Design
Juni 2010
Create a specific Atmosphere
Juni 2010
Retail Stores
Juni 2010
„Generell Lighting“
Juni 2010
The Look Ahead…
Innovations
 Lamps
 Lumen Efficiency (lm/W)
 Low UV Radiation
 Color Rendering (CRI)
 Average Lamp Life Time
 Wattage (20W – 400W)
 Reflectors & Positioning of LEDs
 Spot Reflector
 Broad Beam Reflector
 Batwing Reflector
Gear
 Electronic
LED Module
 Operating
DependingEfficiency
on the Application
 Quality
ofLED
Lighting
Different
Modules available
 Operating & Security
LEDLumaire
Luminaire
Juni 2010
The Look Ahead…
Juni 2010
The Look Ahead…
Energy Efficient Lighting MUST not only
reduce your power consumption, but must be an
effective component to an overall store design that truly
delivers the energy savings as a whole and
still excites customers.
 Latest Product Technology
 Energy Consumption Comparison
 Efficient and Sustainable Lighting Design Layout
Energy Efficiency and
Perfect Product Illumination in Line
Juni 2010
Hartelijk bedankt!
Maurice Arons
Managing Director
BÄRO Trend-Light B.V.
Hendrik Mesdagstraat 2
5753 DA Deurne
The Netherlands
Guido Fox
International Key Account Manager
BÄRO GmbH & Co. KG
Wolfstall 54-56
42799 Leichlingen
Germany
Office:
Fax:
Office:
Mobile:
+31 49 33 11 314
+31 49 33 11 321
E-Mail: [email protected]
www.baro.nl
+49 2174 799 313
+49 170 273 54 84
E-Mail: [email protected]
www.baero.com
Juni 2010

Energy Efficient Lighting in Buildings Lighting Concepts

Transcription

Similar documents

Confidential