the pharos led bollard

THE PHAROS
LED BOLLARD
The Pharos LED Bollard
Developments in LED technology enable far more flexibility
and creativity for lighting within street furniture than was
previously possible. The Pharos LED bollard product
allows designers to integrate lighting that enhances
the surroundings and promotes a safe atmosphere
across parks and campus environments. The lower level
lighting offered by the Pharos LED bollard works as an
enhancement to traditional street lighting.
Ideally suited for lighting paths, pedestrian walkways and
parks, integrated LED lighting in bollards can work as an
architectural feature, enhancing available space as well as
lighting the way.
The Pharos range of LED bollards offers ‘fit and forget’
reliability that can last several decades. The luminaires are
IP66 LEDSAFE, with a sealed optic and an integral internal
driver, delivering reliability and protection against the
elements for the whole lifetime of the product.
Designed to be extremely robust and vandal resistant, the
Pharos boasts IK10 impact resistance, meaning that both
the luminaires and the bollards themselves will resist
minor bumps to major impacts. For high risk areas, the
Pharos can be further enhanced with embellishments
affording additional vandal resistance.
A further benefit of the Pharos is the ease of customisation.
Whilst the original product looks great and works extremely
well, embellishments such as a brushed stainless steel
finish with bespoke laser cut logos can be easily added.
8 LEDs totalling 11 watts are encased in each bollard
offering extremely clear and clean white lighting around the
whole bollard.
As the Pharos range comes from Urbis Schréder, the global
leader in LED lighting solutions, with a track record built
over more than 35 years, you can be assured that your
lighting solution will combine great design and high levels
of reliability for many years to come.
Urbis Schréder – lighting the future.
FLANGE MOUNTED
224
Key Features and Product Advantages
•
IP66 LEDSAFE® sealed head (optic) assembly with
integral LED driver
•
IK10 impact resistance and real-world vandal resistant
design
•
UV stable polycarbonate protector with option for
diffused or transparent finish
•
Can give both a decorative and functional aesthetic
with just a few changes in material, finish and
embellishments
•
Embellishments can be either:
ROOT MOUNTED
>> Decorative, e.g. brushed stainless steel with
bespoke laser-cut logo or design etc
8 LED 11W optic with symmetric and asymmetric
variants
•
Asymmetric variant with Lensoflex®2 optics
designed to maximise performance and spacing
whilst minimising glare
1000
•
300
>> Functional e.g. additional vandal resistance, or as a
light mask/shield
>> Photometry designed to achieve S and P lighting
classes from (BS EN 13201-2:2003)
>> Example: When positioned at the edge of a 2m
wide footpath, a 12.5m spacing is achievable when
lighting to class S3/P3
Symmetric version with diffused protector designed
for way-marking and lighting parks and gardens. This
configuration will also give good vertical illuminance
on pedestrian walkways and cycle paths
•
Wide ambient operating temperature range -40°C to
+55°C @ 350mA
GROUND LEVEL
270
00
•
350
>> A larger spacing can be achieved with various setback distances from the path edge
LIGHTING LEVELS
PHOTOMETRY
TYPICAL RESULT AT 12.5M SPACING
PHAROS BOLLARD
ASYMMETRIC CLEAR
PROTECTOR
MATRIX 356012
PHAROS BOLLARD
SYMMETRIC DIFFUSED
PROTECTOR
MATRIX 356004
12.5m
2m
REAL WORLD
VANDAL
RESISTANCE
LIGHTING LEVELS
ACHIEVED IS AS FOLLOWS:
Lighting Class P3
Path Width
2m
3m
Eav
av
8.62
7.32
Emin
min
1.59
1.73
Although the bollard
is rated to IK10, it has
also been designed and
tested for ‘real world’
vandal resistance. The
robust construction
method and shatterproof
polycarbonate protector
ensures that the Pharos
bollard can withstand
almost anything!
Isolux Diagram
Polar Diagram
Isolux Diagram
Polar Diagram
LED BOLLARD - OPTIC MOUNTING SYSTEM
Sealed optic assembly is integrated into the bollard base from above and tightened through the door, leaving no external
visible fixings.
The head mounting system allows full 360° of adjustability, so the orientation and therefore light distribution can be
finely tuned on site.
Welded internal
mounting ring
Mounting bar
TECHNICAL SPECIFICATION
MOUNTING OPTIONS
• Parks and gardens
Optic tightness level:
IP66
• Cycle paths
Impact resistance:
IK10
• Pedestrian walkways
Nominal voltage:
230V – 50Hz
Electrical insulation class:
I (Class II available on request)
Power consumption @ 350mA:
11W
Colour temperature (Standard):
Neutral White
Weight:
22kg
UMSUG code
41 0011 0000 100
Colour (standard):
AKZO grey 900
Surge protection:
10kV
Operating temp range:
-40°C to +55°C @350mA
• Way-finding and markers
• Vehicular access restriction
KEY FEATURES
• Distinctive design
• High performance LED photometry
• Low glare
• Low power
• Low maintenance
• On-site adjustability
• Robust, vandal resistant design
• Ingress protection – IP66
• Impact resistance – IK10
• Available in various colours
OPTIC ASSEMBLY
The bollard optic assembly is
constructed of cast aluminium, and
has been designed to give as short
a thermal path as possible from
the LEDs to the surrounding air.
This ensures the LEDs are kept as
cool as possible, optimising their
performance ensuring long life and
high LED lumen maintenance.
224
PHOTOMETRIC LIGHT ENGINE
300
• Parking areas
ROOT MOUNTED
• 8 LED 11W with symmetric and asymmetric variants
• Asymmetric variant with Lensoflex®2 optics designed to maximise
performance and spacing whist minimising glare.
>> Photometry designed to achieve S and P lighting classes from (BS
EN 13201-2:2003)
>> Example: When positioned at the edge of a 2m wide footpath, a
12.5m spacing is achievable when lighting to class S3/P3
>> A larger spacing can be achieved with various set-back distances
from the path edge.
• Symmetric version with diffused protector designed for waymarking, and lighting parks and gardens. This configuration will
also give good vertical illuminance on pedestrian walkways and
cycle paths.
GROUND LEVEL
270
STANDARD OPTIONS TABLE
300
• Entrances
FLANGE MOUNTED
1000
• Industrial walkways
Powder coated galvanised
steel base with flush fitting
door, flange and root
mounting options available
as standard.
350
APPLICATIONS
(Class I, Neutral White, AKZO Grey 900 without embellishments)
Mount Type
Protector
CLEAR
ROOT
FROSTED
CLEAR
FLANGE
FROSTED
Distribution
Order code
ASYM
PHAROS 1
SYM
PHAROS 2
ASYM
PHAROS 3
SYM
PHAROS 4
ASYM
PHAROS 5
SYM
PHAROS 6
ASYM
PHAROS 7
SYM
PHAROS 8
Other options available on request - please enquire
220 PCD
FUTUREPROOF
The optic assembly is serviceable, but can also be easily replaced by unbolting it through the bollard door. This means the
bollard optic can be upgraded in the future without disturbing the groundworks.
LEDSAFE®
To maximize the reliability of the LEDs, the optic is sealed to IP66. This ensures that the photometric performance is
maintained over time.
Urbis Schréder Ltd
Sapphire House | Lime Tree Way
Hampshire International Business Park | Chineham
Basingstoke | RG24 8GG
T +44 (0) 1256 354446 | F +44 (0) 1256 841314
E [email protected] | W www.urbis-schreder.com
Copyright © Urbis Schréder Ltd 2014. The information, descriptions and illustrations herein are of only an indicative nature. Due to advanced developments, we may require to alter the characteristics of our products without
notice. As these may present different characteristics according to the requirements of individual countries, we invite you to consult us.
THE PHAROS LED BOLLARD
06/15