Cylinder Valves - LP

Cylinder Valves
Cylinder Valves - Small Cylinders With OPD
These OPD valves are designated for very specific dip tube lengths as shown in the table. Check the
“D.T.” data stamped on the cylinder to determine the correct dip tube length required.
Part
Number
Dip Tube
Length With
Deflector
80-9890
3.0”
80-8107
4.0”
80-8109
4.8”
80-8110
6.5”
Service Connection
Container
Connection
Type
3/4” MNGT
Type I
Description
1-5/16”
M ACME and
FPOL
Pressure
Relief
Valve Setting
375 PSIG
Accessories
ACME Dust
Cap
907-12
Order
Separately
80-8107
Type I QCC ACME Adapters
CGA 791 Standard
G-1855-A02 Black Handle for BBQ Grills
Thermally sensitive. Built-in excess flow.
Use for appliances up to 70,000 BTU/HR.
G-1855-A03 Green Handle for larger appliances
Thermally sensitive. Built-in excess flow.
Use for appliances 71,000 - 200,000 BTU/HR.
G-1855-A02
ME-519-25H Red Handle w/1/4” Hose Barb
Thermally sensitive. Built-in excess flow.
Use for appliances 71,000 - 400,000 BTU/HR.
QCC Cap
ME-519-25H
Fill Adapter
QCC X FPOL
Male QCC Adapter
QCC X 1/4”FNPT
907-12
ME393-1
7193T-10
Fill Adapter
QCC X 1/4” MNPT
7193U-10
Type II Quick Connect Adapters
CGA 810 Standard
Regulator Connector
M Quick Conn X 1/4” MNPT
5LPA-8C
Fill Adapter
M Quick Conn X FPOL
5LPA
12
Cylinder Valves
Heavy Duty Cylinder Valve - Vapor Service
This heavy duty cylinder valve is designed for vapor withdrawal of
DOT cylinders up to 100 lbs. propane capacity.
Part
Number
Container
Connection
Service
Connection
Pressure
Relief
Valve Setting
Dip Tube
Length With
Deflector
9103D11.6
3/4” MNGT
FPOL
375 PSIG
11.6”
9103D11.6
Cylinder Valve for RV - Vapor Service
Designed for vapor withdrawal service on permanantly mounted RV
tanks. Valve has a large capacity relief set at 312 PSIG.
Part
Number
Container
Connection
Service
Connection
Pressure
Relief
Valve Setting
Flow
Capacity
SCFM/Air
9106CO
3/4” MNGT
FPOL
312 PSIG
645
9106CO
Cylinder Valves - Liquid Withdrawal
Designed for liquid withdrawal service in industrial applications on
cylinders up to 100 lbs. propane capacity.
Part
Number
9107K8A
8556
Container
Connection
3/4” MNGT
Liquid
Service
Connection
Vapor
Service
Connection
Dip Tube
Length With
Deflector
Liquid
Withdrawal
Tube Length
Liquid
LP-Gas
Closing Flow
CGA 555
None
11.6
44”
1.7 GPM
CGA 555
FPOL
None
44”
2.3 GPM
CGA 555
Outlet for
Liquid Service
12982
Liquid Outlet Adapter
CGA 555 X 1/4” MNPT
Pressure
Relief
Valve Setting
375 PSIG
CGA 555
Outlet for
Liquid Service
Female POL
Outlet for
Vapor Service
970
Vapor Outlet Adapter
MPOL X 1/4” MNPT
8556
9107K8A
13
Cylinder Valves
Cylinder Valves - Vapor Service - No Relief
Choose either Standard or MultiBonnet versions. Valves have no
integral relief valve and may only be used on containers that have an
independent pressure relief valve.
Part
Number
9101C1
9101D11.1
9101R1
9101R11.1
Bonnet
Style
Container
Connection
Standard Bonnet
MultiBonnet
Dip Tube
Length With
Deflector
Service
Connection
None
Standard
3/4” MNGT
11.1”
FPOL
None
MultiBonnet
11.1”
9101C1
9101R1
9101H5
9101Y5H
Service Valves for Motor Fuel - EFV - No Relief
Designed specifically for vapor or liquid withdrawal service on ASME
motor fuel containers.
Part
Number
Container
Connection
901C5
FPOL
9101H5
9101H6
Service
Connection
3/4” MNGT
3/8” SAE
Flare
60O Angle
3/8” SAE
Flare
9101Y5H
Liquid Tube
Connection
Liquid
LP-Gas
Closing Flow
2.6 GPM
None
3.6 GPM
1/4” NPT
2.6 GPM
None
3.6 GPM
Service Valves for DOT Forklift Cylinders
Designed specifically for vapor or liquid withdrawal service on DOT forklift containers.
Part
Number
9101P5H
9101P6
Container
Connection
3/4” MNGT
Service
Connection
3/8 MNPT
Liquid Tube
Connection
Liquid
LP-Gas
Closing Flow
None
2.6 GPM
1/4” NPT
1.5 GPM
Accessory Lift Truck Check Connectors
7141F
7141M
7141M-3R Flat Gasket
9101P6
9101P5H
14
7513-25 Oring
Multivalves
Multivalves For DOT & ASME - Vapor Service
Designed for vapor withdrawal service from ASME and DOT containers. They allow on-site cylinder filling
without interrupting gas service.
Part
Number
Bonnet
Style
8555D11.6
Standard
8555R11.6
MultiBonnet
6532R12.0
MultiBonnet
6533R11.7
MultiBonnet
6542R12.0
MultiBonnet
6543R11.1
MultiBonnet
Container
Connection
Service
Connection
Filling
Connection
Dip Tube
Length With
Deflector
Max*
Container
Size
Container
Type
Pressure
Relief
Valve Setting
11.6”
200 lbs.
DOT
375 PSIG
12.0”
43 sq. ft.
ASME
250 PSIG
11.7”
420 lbs.
DOT
375 PSIG
12.0”
53 sq. ft.
ASME
250 PSIG
11.1”
420 lbs.
DOT
375 PSIG
3/4” MNGT
FPOL
1-3/4” Male
Acme
1” MNGT
* DOT valves have relief settings of 375 PSIG. Max container capacity is based on propane capacity.
ASME valves have relief settings of 250 PSIG. Max container capacity is based on outside surface area.
Multivalve For DOT - Liquid Service
Designed for liquid withdrawal service from DOT containers up to 100 lbs. propane capacity. It allows onsite cylinder filling into the vapor space without interrupting gas service.
Part
Number
8555DL11.6
Bonnet
Style
Container
Connection
Service
Connection
Filling
Connection
Dip Tube
Length With
Deflector
Liquid
Withdrawal
Tube Length
Liquid
LP-Gas
Closing Flow
Pressure
Relief
Valve Setting
Standard
3/4” MNGT
CGA 555
1-3/4” Male Acme
11.6”
44”
1.7 GPM
375 PSIG
Large Capacity Relief
CGA 555
Outlet for
Liquid Service
Female POL
Outlet for
Vapor Service
6543R11.1
8555DL11.6
8555D11.6
15
Multivalves
Multivalves For ASME Single Opening Containers
These Multivalves are designed for use in single opening ASME containers equipped with a 2-1/2” MNPT riser for either underground or aboveground service. Two models are offered. Select the model with the correct relief valve size to match the required
flow rate for the container being serviced.
Part
Number
Container
Connection
Service
Connection
Filling
Connection
G8475RV
2-1/2”
FNPT
FPOL
1-3/4”
Male ACME
G8475RW
Vapor
Equalizing
1-1/4”
Male ACME
With
4200 CFH
EFV
Float
Gauge
Opening
Dip
Tube
Length
Pressure
Relief
Valve Setting
*Max
Container
Size
83 sq .ft. Aboveground
Fits
“JUNIOR”
Size
30”
250 PSIG
276 sq. ft. Underground
192 sq. ft. Aboveground
639 sq .ft. Underground
* Tank size reference: A 500 gallon tank has 98 sq. ft. surface area. A 1000 gallon tank has 174 sq. ft. surface area.
G8475RW
Multivalves For Vapor Withdrawal
These Multivalves provide vapor service for ASME containers in a
compact design with multi-function components.
Part
Number
8593AR16.0
7556R12.0
Container
Connection
1-1/2”
MNPT
Service
Connection
FPOL
Filling
Connection
Vapor
Equalizing
1-3/4”
Male ACME
1-1/4”
Male ACME
With
4200 CFH
EFV
3/4” MNGT
None
7556
16
Dip
Tube
Length
30”
12.0”
8593
Shutoffs
Heavy Duty Globe And Angle Valves
RegO Globe and Angle bodies are made from rugged ductile iron. Spring loaded teflon packing provides exceptional leakfree service. Positive shutoff is provided by the synthetic rubber swivel style seat disc. All the valves incorporate a plugged
1/4” FNPT boss on the downstream side of the body for attaching either a hydrostatic relief or a vent valve.
Globe
Angle
Inlet and
Outlet
Connection
A7505AP
A7506AP
A7507AP
Part Number
Propane Flow (GPM)
at 1 PSIG Pressure Drop
Globe
Angle
3/4” FNPT
12.0
17.7
A7508AP
1” FNPT
17.8
22.0
A7509BP
A7510BP
1-1/4” FNPT
36.5
54.0
A7511AP
A7512AP
1-1/2” FNPT
43.0
55.5
A7511FP
-----
1-1/2” Flanged
46.0
-----
A7513AP
A7514AP
2” FNPT
75.0
88.5
A7513FP
A7514FP
2” Flanged
78.0
133.0
A7517AP
A7518AP
3” FNPT
A7517FP
A7518FP
3” Flanged
197.0
303.0
A7507AP
A7518AP
A7509BP
Compact Globe And Angle Valves
Lighter pattern valve with flange seal stem packing. Valves incorporate a plugged 1/4” FNPT boss on the downstream
side of the body for attaching either a hydrostatic relief or a vent valve.
Part Number
Globe
Angle
7704P
7704LP
A7704P
A7704LP
7705P
7706P
A7705P
A7706P
Inlet and
Outlet
Connection
1/2” FNPT
3/4” FNPT
Bonnet
Material
Brass
7705P
7706P
Steel
Brass
Steel
Quick Acting Valves
Designed to provide instant shut-off and fast opening. Vent valve included on downstream side of the body. Locking handle
on “L” series valves prevents accidental opening of valve.
Part
Number
7554SAV
7554LAV
7554SV
7554LV
Inlet and
Outlet
Connection
1/2” FNPT
3/4” FNPT
A7707L
1” FNPT (Straight)
A7708L
1” FNPT (Angle)
Locking
Handle
No
Yes
No
Yes
Yes
7554SV
17
7554LV
A7708L
Shutoffs
Quick Acting Minimum Loss Hose-End Valves
Instant shutoff and fast opening with the valve seat located in the bottom of
the extended ACME connector. Thumb latch on handle prevents accidental
opening. Spring loaded chevron packing gives superior leak free service.
Part
Number
Inlet
Connection
Outlet
Connection
Flow at
1 PSIG Drop
A7797A
1” FNPT
1-3/4”
F ACME
16.0 GPM
PRESS
Spring-loaded Thumb
Button Opens Latch
A7797A
Minimum Loss
Valve Seat
Handle Pivots to
Full Open Position
A7797A in Bobtail Delivery Application
Hose-End Swivels
Rugged leak free design allows complete 360O rotation
of hose end valves for easy connections to fillers. Especially helpful with stiff hoses in the cold of winter.
Typical Swivel Application
ME850SS-6 3/4” Swivel
ME850SS-8 1” Swivel
Quick Acting Cylinder Charging Valves
Cylinder Filling Connectors
7193D-10 POL
Brass body with compact design for cylinder charging.
Part
Number
Inlet
Connection
Outlet
Connection
7193L-10A Lift Truck
7901T
1/4” FNPT
1/4” FNPT
7193U-10 QCC
7901TA
3/8” FNPT
3/8” FNPT
7901TB
7901TC
1/2” FNPT
1/4” FNPT
1/2” FNPT
7193T-10 FPOL X QCC
7901TB
18
12982 & 5760A
FPOL X F Liquid
Shutoffs
Liquid Transfer Valves
Primarily used in conjunction with ChekLok adapters to transfer liquid
from bulk storage tanks through the tank mounted ChekLok excess
flow valves. 1/4” side tap provided for hydrostatic relief valve.
Part
Number
Bonnet
Material
7550P
Brass
A7550P
Steel
7550PX
Brass
A7550PX
Steel
7551P
Brass
A7551P
Steel
Inlet
Connection
Outlet
Connection
Liquid
LP-Gas
Closing Flow
7550P
None
3/4” MNPT
3/4” FNPT
16.0 GPM
1/2” FNPT
None
New Style ChekLok
Old Style ChekLok
7590U-10
7572C-14A
The old style ChekLok valves
are obsolete. Use new style.
7590U - 3/4” Tank Connection
7591U - 1 1/4” Tank Connection
Liquid Transfer Diagram
Needle Valves
Used for accurate throttling in torch and small
burner applications and pressure gauge valves.
Part
Number
Inlet
Connection
Outlet
Connection
1224WA
1/4” MNPT
1/4” MNPT
25NVBR
1/4” FNPT
1/4” FNPT
NV108-4
1/4” MNPT
1/4” FNPT
1316WA
9/16” -18 LH
1/4” MNPT
1318WA
1/4” MNPT
9/16” -18 LH
1316WA
Hotplate Valve
Porcelain handle gas cock with hood orifice.
Part Number
25NVBR
314
Inlet
Outlet
1/8” MNPT
Hood Orifice
NV108-4
CCC 52-1065
19
Shutoffs
Multipurpose Valves With Filler Connection
Designed specifically for use as a manual filler for anhydrous ammonia
applicator containers. Manual valve must be fully open and back seated
for the excess flow to be effective.
Part
Number
Inlet
Connection
A8016DP
A8018DP
1-1/4” MNPT
Outlet
Connection
None
1” FNPT
Filling
Connection
A8016DP
Liquid
LP-Gas
Closing Flow
44 GPM
1-3/4” M
ACME
50 GPM
Multipurpose Valves Liquid Withdrawal
Designed specifically for liquid withdrawal for LP Gas and anhydrous
ammonia containers.
Part
Number
Inlet
Connection
A8017DP
A8017DLP
A8017DH*
1-1/4” MNPT
Outlet
Connection
Liquid
LP-Gas
Closing Flow
1” FNPT
55 GPM
3/4” FNPT
49 GPM
1” FNPT
A8020D
A8018DP
49 GPM
78 GPM
A8017DP
A8020D
* A8017DH has special back pressure check valve in the shutoff seat which allows
trapped product in the downstream piping to return to the storage tank.
Apollo Bronze Ball Valves
Bronze, threaded 600 W.O.G. ball valves. Both series feature RPTFE
seats and stem seals, adjustable packing glands and blow-out-proof stem
seal design.
Part Number
Inlet And
Outlet
Connection
Length Through
Valve “C”
Standard
Port
Full Port
80-101-01
77-101-01
1/4” FNPT
80-102-01
77-102-01
3/8” FNPT
80-103-01
77-103-01
1/2” FNPT
2.25”
80-104-01
77-104-01
3/4” FNPT
3.00”
3.12”
80-105-01
77-105-01
1” FNPT
3.37”
3.62”
80-106-01
77-106-01
1-1/4” FNPT
4.00”
4.25”
80-107-01
77-107-01
1-1/2” FNPT
4.37”
4.75”
80-108-01
77-108-01
2” FNPT
4.68”
5.37”
80-109-01
77-109-01
2-1/2” FNPT
6.50”
6.50”
80-100-01
-----
3” FNPT
6.75”
-----
80 Series
80 Series
77 Series
2.06”
2.25”
20
C
77 Series
Shutoffs
Red Cap Gas Ball Valves
The R602 and R602S gas ball valves are designed specifically for gas service. They incorporate forged brass bodies
for additional strength, hard chrome plated balls, teflon seats and Dacromet treated handles.
AGA Certification
The R602 & R602S valves have been tested to comply with the AGA 3.88 standard. This standard covers manually
operated gas valves for use in House Piping Systems. Pressures up to 5 PSIG.
The R602 & R602S valves have been AGA certified tested to ANSI Z.21-15 standard. This standard covers manually
operated gas valves for use as Appliance Shutoffs. Pressure at 1/2 PSIG.
UL Listings
The R602 & R602S (1/2” & 3/4” sizes only) are UL listed under YRPV.MH15525. This category covers manual gas
shut-off valves intended for use in lines conveying fuel gas. Maximum working pressure 200 PSIG.
Red Cap Pipe X Pipe Ball Valves
Part Number
Max Rating
AGA
Standard
With Side Tap
Inlet and
Outlet
Connection
R602 3/8
-----
3/8”
2 PSIG
R602 1/2
R602S 1/2
1/2”
2 PSIG
R602 3/4
R602S 3/4
3/4”
2 PSIG
R602
R602S
Red Cap Flare X Flare Ball Valves
Part Number
Max Rating
AGA
Standard
With Side Tap
Inlet and
Outlet
Connection
R602 FF 66
R602S FF 66
3/8”
2 PSIG
R602 FF 88
R602S FF 88
1/2”
2 PSIG
R602 FF 1010
-----
5/8”
2 PSIG
R602FF
Red Cap Flare X Pipe Ball Valves
Part Number
R602FM
Outlet
Pipe
Connection
Max Rating
AGA
Flare X MNPT
Flare X FNPT
Inlet
Flare
Connection
R602 FM 68
R602 FP 68
3/8”
1/2”
2 PSIG
R602 FM 88
R602 FP 88
1/2”
1/2”
2 PSIG
-----
R602 FP 1012
5/8”
3/4”
2 PSIG
R602FP
21
Shutoffs
Three Way Mixing Ball Valves
Mixing valves are side entry valves in relation to the
plane of ball rotation. As such, they only require a 90O
rotation of the handle to change discharge ports. Both
discharge ports are open between handle positions.
70-604-01
70-601-01 1/4” Bronze Side Entry
70-604-01 3/4” Bronze Side Entry
Bronze, threaded, 400 W.O.G.
Sizes through 2” available by special order
Typical Three Way Applications
Dispensing systems
Isolating meter flow from cylinder flow
To
Cyl.
Fill
Cylinder purging
Cycling between purge and discharge
To
Bulk
Fill
From
Pump
Plugaroo Combination Plug and Check Valves
175# working pressure plug valves with integral check. Well suited for mixer installations. Available in FNPT or 125# flanged versions.
Part
Number
Inlet and
Outlet
Connection
End
To
End
173 2”
2” Screwed
6 1/2”
173 3”
3” Screwed
8 1/4”
173 4”
4” Screwed
9 3/4”
175 2”
2” Flanged
7”
175 3”
3” Flanged
8”
175 4”
4” Flanged
9”
175 6”
6” Flanged
10”
173 2”
175
Cutaway
Open Position
22
Closed Position
Bulk Storage Plants
Typical Bulk Plant
The graphic shows the layout of a typical propane bulk plant. The main functions of storage, transport fill and bobtail loading are depicted. Although each existing bulk plant is unique in their physical layouts, the basic installations are all similar
in providing the functions described.
The components on the following pages of this catalog make up the basis for a complete operative bulk plant.
Major Components
Key
1
2
3
4
5
6
7
8
9
10
11
12
23
Description
3” Internal Valve
2” Internal Valve
1-1/4” Internal Valve
Back Check
Excess Flow Valve
Emergency Shutoff
3” Angle Valve
1-1/4” Angle Valve
3-1/4” MAcme w/Cap
2-1/4” MAcme w/Cap
1-1/4” Globe Valve
2” Globe Valve
Key
13
14
15
16
17
18
19
20
21
22
23
Description
2-1/4” FAcme w/Plug
3-1/4” FAcme w/Plug
3” Pump
2” Bypass
Hydrostatic Relief
Pressure Gauge
3” Strainer
Thermometer
Float Gauge
Pressure Gauge
Relief Valve w/Stack
Transport
Riser
10
8
9
22
14
5
12
Pumpset
13
17
11
6
Bobtail
Loading
Riser
5
2
18
4
1
21
20
19
5
3" Liquid
1-1/4" Vapor
23
6
3
15
3" Liquid
6
16
7
Bulk Storage Plants
Large Container Mounting
Large propane storage containers must be mounted on concrete piers. Typical
mounting is depicted. Steel supports may only be 6” high unless fireproofed.
The pier footing must be below frost line. A 4 foot height from grade to the
bottom of the tank is desirable to facilitate tank valves, piping and especially
pump suction elevation.
A 3/4” sheet of expansion material is placed between the tank and the concrete
both as a cushion for irregularities and as an isolation for corrosion protection.
Expansion
Material
Detail
Tank
Expansion Material
3/4” X 15” X 5ft.
(2 pieces per pier)
Concrete
Expansion
Material
Underground Tank Mounting
Underground tank installations require anchorage with a
concrete footing of sufficient weight to prevent flotation.
A typical anchorage system is shown.
Components sized per tank size. Call for details.
Anchor Eye
Turnbuckle
Wire Rope
Thimble
24
Crosby Clip
Large Container Connections
Connections for Containers over 4000 Gallons
The container connection requirements as specified in NFPA 58 for containers over 4000 gallons water capacity are listed
below. The “spirit” of the requirements is to provide remote closure and automatic (fire) closure AT THE CONTAINER
CONNECTIONS. The requirements are effective July 1, 2011.
Permissible Options for Connections
After Year 2001
Installations
Before Year 2001
Installations
Vapor Inlet
Option A or
Option B or
Option C
No
requirement
Vapor Outlet
Option B or
Option C
No
requirement
Liquid Inlet
Option D or
Option E
Option D or
Option E or
Option F or
Option G
Option E
Option E
or
Option H
Service
Liquid Outlet
Connection Illustrations
Option C
Option B
Option A
Positive Shutoff &
Check Valve
Positive Shutoff &
Excess Flow Valve
Internal Valve
OR
Excess Flow Valve &
API 607 Ball Valve
Option F (liquid in)
and
Option H (liquid out)
Option E
Internal Valve
OR
Excess Flow Valve &
API 607 Ball Valve
Positive Shutoff & Excess Valve &
Emergency Shutoff
25
Option D
Positive Shutoff &
Check Valve
Option G
Positive Shutoff &
Excess Flow Valve &
Check Valve
Plant Closure Systems
Pneumatic Control
Pneumatic remote closure is the preferred
method for internal valve actuation. The
pneumatic actuator attaches directly to the
internal valve body and strokes the valve
open and closed. This arrangement offers
several distinct advantages:
• The tank valves remain normally closed
and are only opened during transfer operations.
• The pneumatic controls can be installed
at any convenient location.
• The emergency shut off valves at the
loading and unloading risers can be incorporated into the plant pneumatic system.
• The plant operator actuates only one control from a central, convenient location.
Cable Control
For plants with basic systems such as a single storage tank, remote closure can be accomplished readily with cabling. The
internal valves are controlled separately from the emergency valves on the risers. Possible cabling arrangements are depicted below.
Emergency Valve Control
A single emergency shutoff valve with remote closure
controlled by a taut wire cable.
Pulling the cable anywhere along its length will trigger
the valve release mechanism.
Internal Valve Control
Two internal valves with remote closure controlled by
a single taut wire cable.
Pulling the cable anywhere along its length will trigger
both valve release latches.
26
Internal Valves
Internal Valve Overview
Internal valves are used primarily in the openings of storage tanks. With their normally closed design and shutoff seat internal to the storage tank, these valves provide a very safe primary shutoff at the container opening. The valves are supplied
with a handle for manual operation. Accessories allow them to be actuated manually, by cable or with air.
Valve Operation
The handle does not open the main seat of the valve. The handle only lifts the pilot stem allowing product to bleed downstream of the main seat. After the pressure equalizes across the main seat, the valve spring opens the valve fully. A pressure
drop in the downstream piping, such as in a pipe breakage, causes the higher inlet pressure to close the main seat.
Rapid Bleed
Valve Fully Closed
Inlet pressure and the
closing spring provides “bubble-tight”
closure.
Slow Bleed
Full Flow
Rapid Bleed
The handle is moved to
the mid-point position
providing rapid bleed past
the partially open pilot
seat.
Valve Fully Open
After pressure equalization,
the handle is moved to the
full open position and the
excess flow spring holds the
main valve wide open.
Excess Flow Closed
A large pressure drop across
the valve moves the main
seat to the closed position.
A slow bleed occurs through
the fully open pilot seat.
Internal Valve Installation Note
Internal Valves should be installed in half couplings. Full
couplings, standpipes and standard size pipelines create undue
restriction to the flow around the valve seat. Premature excess
flow closure and extreme pressure drops will occur when
installed in other than half couplings.
Valve
in
Full
Coupling
Valve
in
Half
Coupling
Valve in Standpipe
or
Pipeline
When installing Internal Valves in standpipes or pipelines,
follow these recommended configurations closely to avoid
problems.
B
Recommended Configuration
A
Pipe Size
B
Reducer
C
Length
A3209 Series
(1-1/4” MNPT)
2”
2” X 1-1/4”
8”
A3212 Series
(2” MNPT)
3”
3” X 2”
12”
A3213 Series
(3” MNPT)
5”
5” X 3”
14”
Valve
27
A
C
Internal Valves
1-1/4” Threaded Internal Valves
Designed for use as the main valve on small capacity pumping systems, the vapor equalizing opening
on bobtail trucks or on inline installations.
Closing Flow
Part
Number
Inlet
Connection
Outlet
Connection
A3209D050
A3209D080
A3209DT050
1-1/4” MNPT
1-1/4” FNPT
A3209DT080
LP-Gas
NH3
50 GPM
45 GPM
80 GPM
72 GPM
65 GPM
45 GPM
80 GPM
72 GPM
Accessories
Thermal
Latch
Pneumatic
Actuator
A3209TL
A3209PA
or
A3209PAF
(1/4” FNPT)
A3209D050
1.5”
A3209TL
A3209D050
with A3209PAF
4”
2.9”
A3209DT050
A3209D050
with A3209TL
A3209PA
1-1/4” Application Examples
A3209D used on Liquid Feed to Pump
(cable or pneumatic actuation)
A3209D with Pneumatic Actuator used
on Vapor Return of Bobtail
28
Internal Valves
2” & 3” Threaded Internal Valves
Designed for liquid withdrawal and vapor equalizing on bobtail trucks, transports and stationary storage tanks. Valves may be operated manually or pneumatically.
Part
Number
(Standard
Valves)
Part
Number
(“T” Body
Valves)
A3212R105
A3212RT105
A3212R175
A3212RT175
A3212R250
Inlet
Connection
MNPT
Outlet
Connection
FNPT
Closing Flow
(GPM)
Half Coupling
Closing Flow
(GPM)
Full Coupling
LP-Gas
NH3
LP-Gas
NH3
105
95
65
59
175
158
100
90
A3212RT250
250
225
130
117
A3213R150
A3213RT150
150
135
125
113
A3213R200
A3213RT200
200
180
160
144
300
270
250
225
400
360
325
293
A3213R300
A3213RT300
A3213R400
A3213RT400
2”
3”
A3212R
2”
3”
A3213T
Accessories
Rotary
Pneumatic
Actuator
Pneumatic
Actuator
Thermal
Latch
A3213PA
(3/8” FNPT)
A3213TL
A3212RA
A3213RA
A3213R with
A3213RA Rotary
Actuator
A3213TL
A3213PA
A3212R in Tank Coupling
29
Internal Valves
3” Flanged Internal Valves
Designed for liquid withdrawal on bobtail trucks and transports. Valves may be operated manually or pneumatically.
Part Number
Single Flange
Double Flange
Operating
Lever
Position
A3217AR160
A3217DAR160
Right Side
A3217AL160
A3217DAL160
Left Side
A3217AR210
A3217DAR210
Right Side
A3217AL210
A3217DAL210
Left Side
A3217AR260
A3217DAR260
Right Side
A3217AL260
A3217DAL260
Left Side
A3217AR410
A3217DAR410
Right Side
A3217AL410
A3217DAL410
Left Side
Inlet
Connection
3” 300#
ANSI RF
Modified
Flange
Outlet
Connection
3” 300#
ANSI RF
Flange
Closing Flow (GPM)
LP-Gas
NH3
160
145
210
190
260
236
400
372
Pneumatic
Actuator
A3217ARPA
A3217ALPA
A3217ARPA
A3217ALPA
A3217ARPA
A3217ALPA
A3217ARPA
A3217ALPA
Typical
Mounting
A3217
Single Flange
A3200L
A3217DAL
Double Flange
A3217 with
A3217FPA
A3217AL
Left Hand
A3217FPA
30
A3217AR
Right Hand
Internal Valves
4” Flanged Internal Valves
Designed for liquid withdrawal on transports or large storage tanks. Valves may be operated manually or pneumatically.
Part Number
A3219FA400L
A3219FA600L
Inlet
Connection
Outlet
Connection
4” 300#
ANSI RF
Modified
Flange
4” 300#
ANSI RF
Flange
Closing Flow (GPM)
LP-Gas
NH3
400
360
600
Pneumatic
Actuator
Remote
Thermal
Release
A3219FPA
A3219RT
540
A3219FA600L
with
4” Transport Pump
A3219FA600L
A3219FA600L
with
A3219FPA
Pneumatic Operator
A3219FPA
Pneumatic Operator
A3219RT Providing
Remote Diagonal Closure
with Fusible Element
A3219RT
Remote Thermal Release
31
Internal Valves
Flomatic Pressure Actuated Internal Valves
Designed for liquid withdrawal on bobtail trucks and transports. Valves
are fully automatic opening and closing with pump discharge pressure.
Accessories
(Included With Flomatic)
Inlet
Connection
Outlet
Connection
A7883FK
3” 300#
ANSI RF
Modified
Flange
3” 300#
ANSI RF
Flange
A7884FK
4” 300#
ANSI RF
Modified
Flange
4” 300#
ANSI RF
Flange
Part Number
Filter
3-Way Valve
A7884-201
A7853A
Pneumatic
Actuator
A7853PA
A7883FK
A7853PA
A7884-201
A7853A
Flomatic Valve Closed
Flomatic Valve Open
32
Loading And Unloading Risers
Loading and unloading risers incorporate heavy steel frame and legs to protect plant piping in the event of a pull-away.
Forged steel pipe couplings are welded in the vertical plane to accept plant and discharge piping. Discharge nipples as illustrated below are recommended to provide extended leverage to ensure a reliable shear point. Units come completely welded
and ready to set in place.
2 Hole Riser
3 Hole Riser
Fitted with 3”, 2” or 1-1/4” Couplings
Fitted with 3”, 2” or 1-1/4” Couplings
Bobtail Loading Riser
Transport Unloading Riser
Vapor Return
Vapor Return
Fill
Fill
Back
Check
Emergency
Shutoff
Emergency
Shutoffs
33
Emergency Shutoff Valves
Emergency Shutoff Valves
For installation in liquid and vapor transfer lines at bulk plants to provide for quick shutoff in the event of accidental pullaway, line breakage or hose rupture. Valves may be opened and closed by use of the operating lever, by remote cable control
or by means of a pneumatic actuator. All arrangements incorporate a fusible element for fire emergency shutoff.
Part
Number
In & Out
Connection
LP-Gas Liquid Flow
Capacity (GPM)
6010
1-1/4” FNPT
259
6016
2” FNPT
711
6024
3” FNPT
1325
Pneumatic
Shutdown
Pneumatic
Open/Close
6016-60D
6016-60C
6016 with
6016-60C
6016
6010 with
6016-60D
Pull-Away Valves
Provides pull-away protection for transfer operations. Stops gas escape
from both upstream and downstream lines in the event of a pull-away.
Inlet and
Outlet
Connections
Length
Of
Valve
LP-Gas Flow
at 10 PSIG
Differential
3/4” FNPT
3-7/8”
16 GPM
A2141A8
1” FNPT
4-9/16”
30 GPM
A2141A10
1-1/4” FNPT
5-5/8”
75 GPM
A2141A16
2” FNPT
14-5/16”
350 GPM
Part
Number
A2141A6L
A2141A6L
A2141A8
Typical Bulk Fill
Pull-Away
Typical Dispenser
Pull-Away
34
Emergency Shutoff Accessories
Sight Flow Indicators
Allows bulk plant operators to visually inspect liquid flow conditions.
Integral swing check prevents reverse flow and product loss if the hose
fails during a loading operation.
Inlet And
Outlet
Connections
Length
Through
Valve
A7794
2” FNPT
5-3/4”
A7796
3” FNPT
7-3/8”
Part
Number
A7796
Valve Cabling Accessories
Stainless steel cable and accessories for remote control of internal valves and emergency shutoff valves.
7606RM-1
1/16” SS Cable
7606RM-18
1/8” SS Cable
7605-73
1/16” Cable Sleeve
7605-74
1/8” Cable Sleeve
7605-74
Sleeve
7605-75
1/8” Crosby Clip
212 Degree
Fusible Link
Pipe Clamps & Eyebolts
Part
Number
B3198H-1-1/4
Fits
Over
Pipe Size
1-1/4”
B3198H-2
2”
B3198H-3
3”
B3198H-2
EYE-06-3
35
Matching
Eyebolt
EYE-06-3
3/8” X 3”
EYE-08-4
1/2” X 4”
Pneumatic Accessories
Pneumatic Tubing Accessories
Pneumatic control of internal valves and emergency shutoff valves.
Post Mounted
Discharge Assembly
Rack Mounted
Charging Assembly
Diaphragm Actuated Control Valves
Control valves are diaphragm actuated
for leak-free reliable service.
Nitrogen Regulator
Charging Valve
Latching Valve
To
System
3-way Valve
125T Charging Valve
Charging valves are spring return with
“push to charge” action.
1464X4
Union Tee
1924-01-1FF
Nylon Tubing
125A Latching Valve
Latching valves are pilot actuated,
latched open with system pressure.
1469X4X4
Union Elbow
1468X4X4
1/4” MNPT Adapter
1462X4
Union
222P-4-2
Adapts 1/4” FNPT
To
1/8” MNPT
36
125V 3-way Valve
3-way valves have plunger detents which
hold the valve in the On or Off position
until the operator manually moves the plunger.